Embed Size (px)
Citation preview
Daniel L Moore 1609 Blue Quail Ct. Rio Rancho, NM 87144 (505) 280-2626 [email protected] [email protected]
Qualifications Summary
Project planner and problem solver with a strong technical background who readily adapts to change, works independently and exceeds expectations. Able to juggle multiple priorities and meet tight deadlines without compromising quality.
Technical skills
An accomplished multidiscipline technician with strong mechanical background that includes more than 18 years
at Intel and 10 years in construction trades. Accomplished in all phases of semiconductor manufacturing
including: equipment installation, qualification, operations, maintenance, and troubleshooting, Also proficient in
statistics, quality assurance, electronics, networking and both computer hardware and software applications.
Experience
Intel Fab11x – Rio Rancho, NM June 1997 – Present
Install /Demo Tool Owner, (Oct 2012 – Present 2016)
Managed all phases of the Installation, decontamination, demolition and shipping of 30 different equipment
sets. The quality demolition of equipment saved over $100 million for Intel with the reuse of equipment.
Coordinated and completed all levels of safety assurance for Intel, venders, and private contractors.
Managed all Demo/Decon resources and activities with respect to budget and time constraints.
Created and provided all required documentation related to safety, decontamination, shipping and export
compliance for all activities.
Trained Intel personnel at various locations, including China, to perform all disassembly and Decontamination
tasks on Endura and Sabre Platforms for a cost savings of over 50k per tool.
Manufacturing Equipment Tech, (June 97 – Oct 2012)
Maintenance and repaired AMAT 5500 Endura thin film deposition tool as a L3 Equipment Tech and L2
Process.
Served as tool owner of KLA/Tencor AIT's analytical and confocal review stations as a L3 Equipment Tech.
Operated and maintained Guaad planarization tools as a L2 Process Tech.
I have also been a member or leader of various quality and improvement teams over the many years at Intel.
Other Employment/ Experience
From 1985 to 1994
Tow Truck Driver (AAA in Ypsilanti Mi.)
Maintenance on Trans Air link’s DC3 swing tail at Willow Run airport (Ypsilanti Mi.)
Supervised the reconstruction of 3 homes after hurricane Andrew in Miami, Florida
Shipping and receiving (Studio Stair in Ypsilanti Mi.)
Computer repair, Data recovery, Network connectivity and security. (from 1 990 to present)
Mechanic and Welder (Terra Firma Ypsilanti Mi.)
Various Jobs Local 14 Trowel Trades in Ypsilanti Mi. Flatwork and Tile Setter almost 10 years.
Mechanic Experience with Cat, Kumatsu, Gehl, and John Deer -- Loaders, backhoes, Skid steer
Experience with Snow plow Maintenance and Hydraulic repairs.
Various Construction, Job site prep, Framing, Forms, Brick fascia
Education
Washtenaw Community Collage
Mechanical Eng( Not completed)
Drafting, Machining, English GPA:4.0
Eastern New Mexico University Roswell
A.S., Electronics and Computer repair ( Completed 1996)
GPA: 4.00
Intel-U NM
Safety and Job related training.
Over 400 hrs.
References
Roger Moore Brother (575)910-5801
Bryant Dunlap Friend 34yrs (575)317-3561
Don Wrobel Engineering tool owner (505)991-5416
Glen Constantineau Friend 5yrs (505)506-7494
Ronny Davie Friend 19yrs (505)280-3610
Wain Perry Friend 19yrs (505)818-7342
