Pigging FormPLAINS1. Division2. DistrictMAINTENANCE PIGGING
REPORT FORM 320Mid ContinentRussell3. Jurisdiction4. Pigging
InformationDOTNON-DOTSEGMENT NAMEPIG TYPE (See Below)SIZEDATE
INLNCHD BYDATE OUTDEBRIS, PARAFFIN AND WATER REMOVEDCOMMENTS1Wolf
to Eubanks 88.181A6JDJD1/2 parafin2Wolf to Eubanks 88.182B6JDJD1/2
pint parafin3Santanta Dis 46.032B6JDJD1/2 gallon parafin4Santanta
Dis 46.032B6JDJD1/2 gallon parafin5Sooby to Wolf 88.171A4JDJD1 pint
parafin6Sooby to Wolf 88.172B4JDJD1 pint parafin7Fuller Dis
88.092B3JDJD1 pint parafin8910111213141516171819204. Submitted
by:Distribution: Original - Records Specialists Copies- Supervisor,
Corrosion TechMAINTENANCE PIGGING REPORTRevised: July 200849 CFR
195.11 (b)(10)FORM 320
GROUP 1Brush and Scraper PigsABCDGROUP 2Cup, disk & cup and
disk pigsABCDGROUP 3Foam, Coated Foam and Dual- Diameter
PigsABCD"D" is an overlapping slotted disk pig for dual diameters
or other dual-diameter design.
InstructionsINSTRUCTIONS FOR MAINTENANCE PIGGING
REPORT1DIVISIONEnter your division, i.e., Gulf Coast,
Mid-Continent; Rocky Mountain; Southern, Southwest, of
Western2DISTRICTEnter the Operations District where the pig is
launched3JURISDICTIONCheck to indicate the jurisdiction of the
pipeline segment. Check with Regulatory Compliance Group for
correctdesignation. DOT Jurisdictional lines should be on a
separate page from Non-Jurisdictional lines.4PIGGING
INFORMATIONSegment NameEnter the name of the segment, preferably as
listed in the pigging database.Pig TypeEnter the type of pig using
the drawings at the bottom of the form as a guide.Select the pig
that most nearly looks like the actual pig used. Enter the Group
numberand letter designation, for example, 1A would be a brush pig
similar to the oneshown above the letter A. If more than one pig is
run, say a brush pig followed by adisk pig it might be entered as
"1A+2C", or entered as a separate run on another line.SizeSize
(diameter) of the pig.Date InDate the pig was launched.If the pig
is launched by one person and received by another the launcher's
and receiver'sdata should be entered on the same report. It is the
responsibility of the DistrictManager/Supervisor to assign the task
of completing the form to theresponsible personnel.Launched ByEnter
the initials of the individual who launched the pig.Date OutDate
the pig was received or removed from the trap.Received ByEnter the
initials of the individual who received the pig.Debris, Paraffin
and Water RemovedEnter the approximate amount of material removed
from the pipe. This may be water, sludge, paraffin or other
material. When practical express the amount as a volume, i.e., one
quart, one gallon, five gallons, etc.NOTE:At the end of each month,
send Original to the Division Records Specialist and copies to your
Supervisor and Corrosion Tech.
ExamplePLAINS1. Division2. DistrictMAINTENANCE PIGGING REPORT
FORM ???MidcontinentCushing3. Jurisdiction4. Pigging
InformationDOTNON-DOTSEGMENT NAMEPIG TYPE (See Below)SIZEDATE
INLNCHD BYDATE OUTRCVD BYDEBRIS, PARAFFIN AND WATER
REMOVEDCOMMENTS1Pond Creek to Robinson1A605/24/08RCD06/01/08DCR5 g.
paraffin, trace waterPig was worn badly2Pond Creek to
Robinson1B+2C606/14/08RCD06/18/08DMH10 g. paraffin, 5 g. waterPig
looked good3Pond Creek to Robinson1C606/27/08RCD07/01/08RCS2 g.
paraffin, 2 g. waterSome brushes
missing45678910111213141516171819204. Submitted by:Distribution:
Original - DOT Files, Copy - Supervisor, Corrosion TechMAINTENANCE
PIGGING REPORTRevised: July 200849 CFR 195.11 (b)(10)FORM ???
GROUP 1Brush and Scraper PigsABCDGROUP 2Cup, disk & cup and
disk pigsABCDGROUP 3Foam and Coated Foam PigsABC
