Danfoss products have been used for CO2 systems through more than 15 years. CO2 is a well-known gas that has been used in refrigeration system processes and fire fighting systems.

During the last few years, Danfoss has developed and supplied an great number of products for the industrial and commercial CO2 systems at different pressure ratings up to 60 bar. This flyer gives you an overview of Danfoss components available for CO2 systems today.

If you need more information regarding CO2 components and solutions; please contact your local Danfoss sales company or visit our webpage www.danfoss.com/CO2.

REFRIGERATION & AIR CONDITIONING DIVISION

MAKING MODERN LIVING POSSIBLE

Danfoss your CO2 solution provider

A wide range of products for subcritical and transcritical CO2 systems.

Produced by Danfoss RA Marketing 06.2009.MWADKRCI.PB.000.E3.02 / 520H1707

www.danfoss.com/co2

Industrial Refrigeration product rangeDN PS

40 bar[580 psi]

PS52 bar

[754 psi]

PS65 bar

[943 psi] Main Valves, Solenoid Valves ICS 1 ICS 3 all 20-65Motor Valves ICM all 20-65Multifunction valve ICF all 20-40Pilots for ICS Valves CVP (XP)

CVC (XP)EVM (NC)CVP (HP)CVPP (HP)

Stop Valves - SNV SNV-ST, SNV-SS all 8Stop Valves - SVA ST,HS,SS SVA 10-65 10-65

SVA 80-200 80-200 50 barSVA 250-300 250-300

Regulating Valves - REG, REG-SS REG REG-SS all 15 - 65Stop Check Valves SCA, SCA-SS SCA, SCA-SS 15-65 15-65

SCA 80-125 80-125 50 barFilters FIA FIA, FIA-SS 15-65 15-65

FIA 80-200 80-200 50 barCheck Valves CHV, CHV-SS all 15- 65

SCA 80-125 80-125 50 barSolenoid Valves EVRS all 10-25

EVRA all 10-40Electrically operated expansion valve AKVA all 10-40Safety Valves and Change Over Valves SFV - DSV

SFA 15 - DSV 1, 2 20-32POV 40, 50, 80 40-80

Filter drier DCRH High pressure version - 1 or 2 cores only 46 barLiquid level transmitter AKS 41 - -

Gas detectors GD

Danfoss sub-critical CO2 components

The product can be used in standard version. Products are CE approved, if applicable. If not the products are build according to the sound engineering practice. Please refer to relevant technical documentation for more details.

The product must be manufactured in a special version (higher test pressure, marking and documentation). All products are CE approved

Commercial refrigeration product rangeDN,mm

PS35 bar

[508 psi]

PS42bar

[609 psi]

PS46 bar

[667 psi]

PS75bar

[1088 psi]

PS90bar

[1305 psi]

PS140bar

[2030 psi]Solenoid Valves EVR 2, EVR 3 2-3

EVRH 6 - EVRH 15 6-15EVU 2-6HPV (Saginomiya) 6 up to 138 bar

Shutoff Valves (Ball Valves) GBC 6-79 45 barCheck Valves NRVH 6-35Pressure transmitters AKS 2050 - 60 bar 160 bar

AKS 32R - 34 barHSK (Saginomiya) - 150 bar

Electrically operated expansion valve AKV 10 (1-6) 10/12AKV 10-7, 15 12/16

Pressure controls KP6 -RT 265A -MBC 5000 - 160 barCCB (Saginomiya) - up to 165 bar

Filter drier DCRH (1 or 2 cores only) 22-54DML 6-28DMT 12 142 bar

Motorized valves ICMTS 25ETS (12,5 - 100) 12-42 60 barJKV /UKV-J (Saginomiya) 6-8 150 bar

Moisture indicator SGN 6-22SGRN+ -

Compressors for CO2 applications TN 120 bar

Controllers for CO2-applicationsCase controllers: AK-CC 550A and 750Cascade heat exchanger EKC 315A and EKC 316A Pack controller AK-PC 730, 740 and 840Gascooler EKC 326A

Danfoss sub-critical and transcritical CO2 components

2009-07-07T09:44:20+0200Anatolii Mikhailov