Danfoss Price List - American Backflow

High Quality Valves Built to Last ...85

High Quality Valves Built to Last…

Many new Flomatic valve products in2018 are now NSF/ANSI 61 certified.

These products are marked with aNSF/ANSI 61 logo.

PRICE LIST APRIL 16, 2018Rev. 3 effective October 24, 2018

LOOK AT WHAT’S NEW!LOOK AT WHAT’S NEW!

I

WH

AT’S

NEW

AT

800.8

33.2

040

• Model Sylax®

3 – Butterfly ValvesNEW Flomatic SYLAX

®3, Strong DI body, EPDM vulcanized seat, SS stem and disc,

250 PSI bi-directional pressure rating, 230˚F max. temperature rating NSF/ANSI61 certified, for use with ANSI 125/150# flanges, ISO 5211 top flange for easyactuation, rated to 250 PSI for dead-end service.

See Page: 16

Flomatic is pleased to supply valve products that are in full compliance with theConsolidated Appropriations Act of 2014 (Public Law 113-76) “American Ironand Steel (AIS)” requirement on projects that are funded by the Clean WaterState Revolving Fund (CWSRF) and Drinking Water State Revolving Fund (DWS-RF). Many valves are designed, manufactured, serviced and supported out of ourfacility in Glens Falls, New York, USA. Complete unleaded valve product line thatcomplies with all low lead laws – Reduction of Lead in Drinking Water Act andNSF/ANSI 61 stringent requirements for equipment that comes in contact withpotable water.

www.flomatic.com High Quality Valves Built to Last...

• Model 80EVFD & 80SSVFD – Tapped Valves StandardNew tapped valves with a patented VFD design are now standard 1” through 1 1/2” withtappings of 1/8” and 1/4” for all types of water well accessories. The “A”, “B” & “C” tapsallow for easy connection of the pressure switch, pressure gauges and many other typesof accessories. These valves have very low head loss and noiseless operation. The valveshave extra-large bosses that give more threads to ensure the fitting is secure. Also malethreaded end of accessories will not interfere with the check valve operation or poppet.New VFD style are now standard 1”- 1 1⁄2” and old style no longer offered.

See Page: 2 & 6

Also see our new Flo-Trol®

Flow Control Valves, See page 25.

VALVES BY TYPE

Air Release/ Vacuum Page Miniair®, Maxiair®, Wellair® 31 Comboair®, Sewair® Series 31,32 Backflush 32 Auto-Drain - Model 70 1 Auto-Vac® - Model 77 13

Automatic Control Valve Page Altitude – C201, CF201, C205, CF205 22 Back Pressure – C301, CF301 22 Cycle Gard® – CB152E, C153 C3100E, CI, CN, C152E Series 30,29 Float Valve C701, CF701 23 Flow Control C901, CF901 24 Hydraulic Check C1001, CF1001 24 Pressure Reducing C101, CF101, C150E 22 Pressure Relief C401, CF401 23 Pump Control C601, CF601, C621 23 Solenoid Actuated C801-2, CF801-2 24 Surge Arrestor C501, CF501 23 Flo-Trol® 25

Backflow Preventers Page Hose Connection Vacuum Breaker GFHB8 33 Dual Check Valve, GF8080E, GF8080SS 33 Dual Check Valve w/ Atmos. Vent GF8200 33

Unleaded Ball Valves Page (Quarter Turn) SS Ball Valves 24

Butterfly Valves Page Azure® AWWA C504 15 Sylax®3 Wafer & Lug Style 16 Sylax®3 Electric Actuated 16

Break Off Plugs 5

Check Valves Page Ball Check 508, 408,4082,208,208T,208B 13 Globe Style Silent Check 402BT, 402BTR, 402S6, 402S6R 10 Hydraulic Check C1001, CF1001 24 Auto Drain 1 Submersible Check 80E Series, 100E, 100XLE, 80EVFD, 100EVFD, 2 80DI, 80DI8R, 82DI8R-VFD 80MDWVFD, 80DIVFD, 3 80DI8RVFD 3 82DP, 82DI-VFD, 5 80DIA, 80DIB 4 80DICLVFD, 80SL 5 82S6-VFD, 80MS6-VFD, 80S6VFD, 7 100SSVFD, 100MSSVFD 6 Swing Check 78A, 78, 90/92, 93 Series 11 745, 745BF, 745PI, 745BFPI 12

Wafer & SS Check Split Disc®, 888, 888S6 9,10 812X, 888VFD, 888S6VFD 816, 816FL, 816HS Series 8

Foot Valves Page 60SE, 333 Series, 190 Series, 124P, 104 Series, 18 357, 63, 812 Series, 19 80S6FVFD, 302BT, 302S6 19 Series 16, 16FL 20

Gate Valves & Shut Off Page Plug Valves 14 NRS AWWA C515, C509, 34 OS&Y AWWA C509 34 Sylax®3 16

Strainers Page 6P, 46 Series, 6SE 20 Y Strainers 20

VALVES BY MATERIAL

Unleaded Bronze Page Y-Strainers 20

Cast Iron Page Air Release/Vacuum 31-32 Ball Check 13 Foot Valve 19 Globe Style Silent Check 10 Strainer 20 Swing Check 11 Wafer Check 10

Ductile Iron Page Check Valves 3-5 Butterfly Valve 15 Plug Valves 14 Control Valve 22-27 Swing Check 12 Butterfly Valve 16

Galvanized Page Strainers 20

Plastic Page Ball Check 13 In-line Check 19 Insert Check 19 Foot Valves 18 Strainers 20 Submersible Check 19

Stainless Steel Page Foot Valve 19 Strainers 20 Submersible Check 6-9 Wafer Check 9

Unleaded Bronze Page Foot Valves 18 In-line Check 1-2 Strainers 20 Submersible Check 1-2 Sales Agents 35

TABLE OF CONTENTSTABLE OF CONTENTS

II

TABLE

OF C

ON

TEN

TS

800.8

33

.2040Go to www.flomatic.com and type the model

number in the search Product/Site Search

High Quality Valves Built to Last... www.flomatic.com

100ME Discount Code A

100ME - ENVIRO CHECK® body casting unleaded bronze.Hex shaped body for easy wrenching, this valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless steelspring.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

1"M x 1"F* 4071EVFD* .7 50 $ 59.4911/4"M x 1"F 4221LE 1.4 50 $ 50.1611/4"M x 11/4"F 4242E 1.5 50 $ 67.0011/2"M x 11/4"F 4223E 1.5 36 $ 99.00

* VFD poppet style discontinued 4071E

100E - ENVIRO CHECK® body casting unleaded bronze. Hexshaped for easy wrenching, this valve features a non-spin acetalpoppet with a NITRILE (Buna-N) seal and stainless steel spring.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 4201E 1.1 50 $ 46.50 1"* 4201LE* 1.2 50 $ 50.00 11/4" 4202E 1.4 36 $ 64.60 * Longer threads

100E Discount Code A

100DPE - ENVIRO CHECK® body. Dual purpose check valve,stainless steel spring and non-spin acetal poppet. 11/4" male and1" female threads on both ends with a NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

11/4"M & 1"F 4231E 1.1 50 $ 59.50

100DPE Discount Code A 100XLE - ENVIRO CHECK® body casting unleaded bronze.Hex shaped body for easy wrenching, this valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainlesssteel spring. Features extra long threads for bell end special PVCdrop pipe.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

1"M x 1"F 4201XLE 1 36 $ 57.0011/4"M x 11/4"F 4242XLE 1.5 36 $ 75.00 See page 7 for stainless steel version

100XLE Discount Code A

1

80ME - ENVIRO CHECK® body casting unleaded bronze. Thisvalve features a non-spin poppet, with a NITRILE (Buna-N) sealand stainless steel spring.

Temp Max: 180°F (80C) Pressure Max: 400 PSI

SIZE PART NO. WGT. CASE QTY. LIST PRICE

1"M x 1"F* 4071EVFD* .7 50 $ 59.492"M x 2"F 4079E 2.5 16 $ 162.00

* VFD poppet style discontinued 4071E

80E Discount Code A

80E - ENVIRO CHECK® body casting unleaded bronze withthreaded female x female connection. This valve features a non-spin acetal (1/2"- 2") or unleaded bronze (21/2"- 4") poppet with aNITRILE (Buna-N) seal and a stainless steel spring.



1/4 "* 5118E* .2 10 $ 63.64 3/8"* 5159E* .2 10 $ 63.97 1/2 " 4029E .2 100 $ 46.09 3/4" 4030E .7 100 $ 46.67 1" 4031E 1.3 50 $ 49.14 11/4" 4032E 1.6 36 $ 68.18 11/2" 4033E 2.5 25 $ 95.16

2" 4034E 3.1 16 $ 153.5221/2"** 4035E** 6.5 $ 651.00

3"** 4036E** 13 $ 786.00 4"** 4037E** 24 $ 1,362.00

* Pressure Max 200 PSI** Unleaded bronze poppet, 21/2" and larger are recommended for

vertical applications. See 80EVFD or 80DI-VFD for horizontal.

80ME Discount Code A

EN

VIR

O C

HECK

®VA

LVES

800.8

33.2

04

0

NOTE: ENVIRO CHECK WITH SS POPPET ADD "S"TO END OF PART # AND 10% TO LIST.

New NSF/ANSI 61Certified Valves

80HTE - ENVIRO CHECK® body with threaded female xfemale connections. Features a high temperature stainless steelpoppet and a VITON seal with a stainless steel spring. Ideal for hotwater applications.Temp Max: 400°F (150C) Pressure Max: 100 PSI*

SIZE PART NO. WGT. LIST PRICE 1/2"** 4029HTE** .2 $ 81.00

3/4" 4030HTE .8 $ 85.00 1" 4031HTE 1.4 $ 86.00 11/4" 4032HTE 1.7 $ 113.00 11/2" 4033HTE 2.7 $ 158.00 2" 4034HTE 4.0 $ 225.00 21/2" 4035HTE 6.5 $ 750.00 3" 4036HTE 13 $ 890.00 4" 4037HTE 25 $ 1,620.00

* At high temps the pressure rating is derated to 100 PSI,valve will take higher pressure at lower temps.

** Tefzel Poppet

80HTE Discount Code A

70 - Auto-Drain- This 1” valve is available in stainless steeland PVC. All internal parts are engineered composite with a stainless steel disc and resilient seat. Temp Max: 180°F (80C) Pressure Max: 400 PSI

5 PSI – open pressure – standardMATERIAL PART NO. CASE QTY. LIST PRICE

PVC 4501PX 12 $ 47.00Stainless Steel 4501SSX 12 $ 58.00

10 PSI – open pressure – optionalMATERIAL PART NO. CASE QTY. LIST PRICE

PVC 4501P 12 $ 47.00Stainless Steel 4501SS 12 $ 58.00

70 Discount Code A

Note: 10 PSI spring require minimum 5 gpm to close. Forlower flows or long horizontal runs use standard 5 PSI.

High Quality Valves Built to Last...

2

EN

VIR

O C

HECK

®VA

LVES 8

00.8

33.2

040

80XBEVFD-ENVIRO CHECK®

- Body casting unleadedbronze with threaded female x female connection. The valve fea-tures a high strength patented guide, poppet and spring with aNITRILE (Buna-N) seal. This valve has two ¼” tapped holes on theoutlet side for pressure switch and gauge.

Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 7961EVFD 1.2 36 $ 71.21 11/4" 7963EVFD 1.6 36 $ 92.11 11/2" 7964EVFD 2.8 25 $ 117.12 2”* 7965E* 3.2 16 $ 189.88

*non VFD design

80CEVFD-ENVIRO CHECK® - Body casting unleaded bronzewith threaded female x female connection. The valve features ahigh strength patented guide, poppet and spring with a NITRILE(Buna-N) seal. Control center with four tapping; one 1/8" inletside, two 1/4" outlet sides, one 1/8" outlet side with a brass plug.


1" 4061EVFD 1.2 36 $ 71.21 11/4" 4062EVFD 1.8 36 $ 92.11 11/2" 4063EVFD 2.7 25 $ 117.12 2”* 4064E* 3.1 16 $ 189.88 21/2"* 4065E* 6.3 $ 835.00

*non VFD designNote: 2 1⁄2” are recommended for vertical applications.

80BEVFD-ENVIRO CHECK®

- Body casting unleadedbronze with threaded female x female connection. The valve fea-tures a high strength patented guide, poppet and spring with aNITRILE (Buna-N) seal. This valve has two drilled and tappedholes; 1/8" inlet side and 1/4" outlet side. Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

3/4"* 4050E* .6 100 $ 57.22 1" 4051E 1 36 $ 67.45 1" 4051EVFD 1 36 $ 71.00 11/4" 4052E 1.5 36 $ 83.60 11/4" 4052EVFD 1.5 36 $ 87.26 11/2" 4053E 2.3 36 $ 107.35 11/2" 4053EVFD 2.3 36 $ 113.05 2"* 4054E* 2.9 16 $ 170.00 21/2"* 4055E* 6.3 $ 830.00 3"* 4056E* 13 $ 1,171.00 4"* 4057E* 25 $ 1,532.00

80BEVFD with 1/4" Tapped Holes on Both Ends SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 7971E 1 36 $ 67.45 1" 7971EVFD 1 36 $ 71.00 11/4" 7972E 1.5 36 $ 83.60 11/4" 7972EVFD 1.5 36 $ 87.26 11/2" 7973E 2.3 25 $ 107.35 11/2" 7973EVFD 2.3 25 $ 113.05 2"* 7974E* 2.9 16 $ 170.00

*non VFD designNote: 2 1⁄2” & larger are recommended for vertical applications.

80AEVFD-ENVIRO CHECK® - Body casting unleaded bronzewith threaded female x female connection. The valve features ahigh strength patented guide, poppet and spring with a NITRILE(Buna-N) seal. This valve has a 1/8" drilled and tapped hole on theinlet side.


3/4"* 4040E* .7 100 $ 55.14 1" 4041E 1.2 36 $ 61.99 1" 4041EVFD 1.2 36 $ 65.25 11/4" 4042E 1.5 36 $ 82.94 11/4" 4042EVFD 1.5 36 $ 87.31 11/2" 4043E 2.4 25 $ 103.17 11/2" 4043EVFD 2.4 25 $ 108.60 2"* 4044E* 3 16 $ 167.99 21/2"* 4045E* 6.4 $ 788.00 3"* 4046E* 13 $ 1,150.00 4”* 4047E* 25 $ 1,520.00

80AEVFD with a 1/4" Tapped Hole on the Inlet Side SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 7981E 1.2 36 $ 59.14 1" 7981EVFD 1.2 36 $ 65.25 11/4” 7983E 1.5 36 $ 82.34 11/4” 7983EVFD 1.5 36 $ 87.31

80XAEVFD with a 1/4" Tapped Hole on the Outlet Side SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 7982E 1.2 36 $ 61.99 1" 7982EVFD 1.2 36 $ 65.25 11/4” 7983E 1.5 36 $ 82.94 11/4” 7983EVFD 1.5 36 $ 87.31

*non VFD designNote: 2 1⁄2” & larger are recommended for vertical applications.

100MEVFD-ENVIRO CHECK® - Body casting unleadedbronze with threaded male x female connection. The valve fea-tures a high strength patented guide, poppet and spring with aNITRILE (Buna-N) seal.



1"M x 1"F 4071EVFD .7 50 $ 59.4911/4"M x 1"F 4221EVFD 1.4 50 $ 54.5411/4"M x 11/4"F 4242EVFD 1.5 50 $ 79.4511/2"M x 11/4"F 4223EVFD 1.5 36 $115.00

80CEVFD Discount Code A

80BEVFD Discount Code A

100MEVFD Discount Code A

80AEVFD Discount Code A

80XBEVFD Discount Code A

80EVFD/100EVFD-ENVIRO CHECK® - body castingunleaded bronze with threaded female x female connection. Thevalve features a high strength patented guide and poppet andspring with a NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. STYLE WGT. CASE QTY. LIST PRICE

Composite Poppet & Guide

1” 4201EVFD 100 1 50 $ 54.36 1” 4031EVFD 80 1 50 $ 57.25 11/4" 4202EVFD 100 1.4 36 $ 75.20 11/4" 4032EVFD 80 1.4 36 $ 79.79 11/2" 4033EVFD 80 2.5 25 $ 116.00

Stainless Poppet & Composite Guide

1” 4201ESVFD 100 1 50 $ 59.79 1” 4031ESVFD 80 1 50 $ 62.97 11/4" 4202ESVFD 100 1.4 36 $ 82.73 11/4" 4032ESVFD 80 1.4 36 $ 87.77 11/2" 4033ESVFD 80 2.5 25 $ 125.00 2”* 4034EVFD* 80 3 16 $ 170.00 21/2”* 4035EVFD* 80 6.5 $ 720.00

Stainless Poppet & Guide

2” 4034ESVFD 80 3.0 16 $ 187.00 21/2" 4035ESVFD 80 6.5 $ 792.00 3" 4036EVFD 80 13 $ 880.00 4" 4037EVFD 80 24 $1,530.00

*Not for horizontal, see 4035ESVFD & 4034ESVFD.

80EVFD Discount Code A

NEW!

NEW!

NEW!

NEW!

VFD Features & Benefits• Lower Friction Loss • Patented Design• Noiseless Operation • 5 Year Warranty• Stainless Steel Internal Optional • Optional SS or Ductile Iron Body

New NSF/ANSI 61Certified Valves

3www.flomatic.com

DU

CTIL

E IRO

N C

HECK

VA

LVES

800.8

33.2

040


Flomatic Submersible Pump Check ValvePatented Design

MODEL 80DI-VFD SERIESWith Stainless Steel Guiding (2”-8”)

Features & Benefits• 20% - 30% lower Friction Loss • Noiseless Operation• Strong Ductile Iron Valve Body (SS see page 7)• Corrosion Resistant Internal Components• Longer pipe threads with lead-In section• Longer thread area (8 round optional)• Optional “Break-Off” Plug• NSF/ANSI 61 approved

Materials• Valve body: Ductile Iron or 316SS (see page 7)• Valve Guide: 316 Stainless Steel (2” & 21/2” optional)• Follower: Ductile Iron or 316SS (see page 7)• Disc: Buna-N Nitrile (FDA approved)• Spring: 316 Stainless Steel

Additional sizes and models,see website for additional listings.

80DI-VFD Discount Code A

80DI8R-VFD - 8 Round Short Threads High strengthepoxy coated ductile iron patented body, poppet and guide with 8round short thread connection. Features a NITRILE (Buna-N) seal,with stainless steel shaft and a ductile iron poppet. Designed forvertical or horizontal applications.Temp Max: 180°F (80C) Pressure Max: 600 PSIShort Threads - consult factory for standard threads SIZE PART NO. WGT. LIST PRICE

3" 7938-1VFD 16 $ 950.00 4" 7939-1VFD 47 $ 1,030.00 6" 4089-1VFD 70 $ 2,325.00 8" 4090-1VFD 99 $ 3,989.00

To order break-off plug, add “PLG” to part number and add$100.00 to list price, $75.00 added for composite plug installedand add “PPLG” to end of part number.

80DI8R-VFD Discount Code A

80MDW-VFD DEEP WELL® - Epoxy coated carbon steelmale inlet x female outlet body. Metal to metal seat with stainlesssteel spring and stem with 8 Round or 8 Round short threads. Temp Max: 180°F Body Pressure Max: 4,400 PSI (API J55 tubing) SIZE PART NO. WGT. LIST PRICE

23/8 " 7937MDW8EU* 8 $ 1,155.00 27/8 " 7936MDW8EU* 12.5 $ 1,365.00 31/2 " 7938MDW8EU* 19.5 $ 1,575.00 41/2 " 7939MDW8EU* 37 $ 2,310.00 41/2 " 79391MDW8SL** 40 $ 2,310.00 5" 79402MDW8SL** 34 $ 2,310.00 51/2 " 4088MDW8SL** 45 $ 4,410.00 65/8" 4089MDW8SL** 68 $ 5,460.00 7" 4090MDW8SL** 113 $ 7,350.00 75/8" 4091MDW8SL** 90 $ 8,925.00 85/8 " 4092MDW8SL** 99 $10,500.00 95/8 " 4093MDW8SL** 154 $12,600.00

* OD 8rd EU (External-Upset) Tubing ** OD 8rd Male end short casing x female end long casing

To order break-off plug, add “PLG” to part number and add$100.00 to list price.

80MDW-VFD Discount Code A

NEW!

TheHeavyweightChampMade in U.S.A.

®

80DI-VFD - High strength epoxy coated ductile iron patentedbody, poppet and guide with threaded female x female NPT con-nection. Features a NITRILE (Buna-N) seal. Designed for verticalor horizontal applications.Temp Max: 180°F (80C) Pressure Max: 600 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

Stainless Poppet & Composite guide

1” 4031DIVFD 0.8 50 $ 37.00 11/4" 4032DIVFD 1.3 36 $ 51.00 11/2" 4033DIVFD 2.5 25 $ 72.00 2"* 7937VFD* 4 16 $ 136.00 21/2"* 7936VFD* 9 1 $ 310.00

* not for horizontal installation. See 7937SVFD & 7936SVFD below

Stainless Poppet & Stainless Guide

2” 7937SVFD 4 16 $ 149.00 21/2" 7936SVFD 9 1 $ 341.00

Stainless Stem & ductile iron poppet and guide

3” 7938VFD 16 1 $ 455.00 4” 7939VFD 47 1 $ 700.00 5” 4088VFD 49 1 $ 1,300.00 6” 4089VFD 70 1 $ 1,600.00 8” 4090VFD 98 1 $ 2,800.00

To order break-off plug, add “PLG” to part number and add$100.00 to list price, $75.00 added for composite plug installedand add “PPLG” to end of part number.

flomatic vfd

4

DU

CTILE

IRO

N C

HECK

VA

LVES 8

00.8

33.2

040

80DI- High strength epoxy coated ductile iron body, disc and follower with threaded female x female connection. Features aNITRILE (Buna-N) seal, stainless steel spring fasteners, and ductileiron poppet. 21/2" and larger are designed for vertical applica-tions. See 80DIX or VFD design for horizontal. Note: 1" through 11/2" features acetal poppet.Temp Max: 180°F (80C) Pressure Max: 400 PSI 1”–11/2"

600 PSI 2”-8” SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 4031DI 1 50 $ 31.75 11/4" 4032DI 1.6 36 $ 44.15 11/2" 4033DI 2.4 25 $ 60.33 2"* 7937* 4 16 $ 113.12 21/2" 7936 9 $ 270.00 3" 7938 12 $ 380.00 4" 7939 26 $ 590.00 5" 4088 46 $1,096.00 6" 4089 61 $ 1,361.00 8" 4090 93 $2,400.00

*Longer body with stainless steel seat, use break off plug76098-2.

To order break-off plug, add “PLG” to part number for 2”-8”and add $100.00 to list price, $75.00 added for composite pluginstalled and add “PPLG” to end of part number.

80DI Discount Code A

80DIX- High strength epoxy coated ductile iron body features adouble-guided ductile iron poppet. Designed for vertical and hori-zontal applications.Temp Max: 180°F (80C) Pressure Max: 400 PSI

SIZE PART NO. WGT. LIST PRICE 3" 7938DIX 13 $ 360.00 4" 7939DIX 17 $ 565.00 6" 4089DIX 51 $ 1,025.00 8" 4090DIX 89 $ 2,600.00 10" 4091DIX 150 $ 3,900.00 12" NEW 4092DIX 350 $ 8,300.00

To order with break-off plug, replace “DIX” with “XPL” in partnumber and add $100.00 to list price of valve, $75.00 addedfor composite plug installed and add “XPPLG” to end of partnumber.

See 80DI or 80DIVFD for high capacity flow.

100MDI- High strength epoxy coated ductile iron valve featuresmale threaded inlet and female threaded outlet. Ideal forsubmersible pumps.Temp Max: 180°F (80C) Pressure Max: 400 PSI

SIZE PART NO. WGT. LIST PRICE11/4"M x 1"F 4221LDI 1 $ 25.982"M x 2"F* 4084VFD* 4.5 $ 212.00*VFD design

100MDI Discount Code A

BREAK-OFF PLUG- Stainless steel 304 construction. Threadedto install into valve. When broken off, riser pipe drains.Temp Max: 180°F (80C) Pressure Max: 600 PSI

SIZE PART NO. BREAK OFF PLUG LIST PRICE 2" 76098-2 1/4" $ 64.00 2 1/2" 76098-3 3/8" $ 67.00 3" 76098-6 3/8" $ 67.00 4" 76098-7 3/8" $ 67.00 5"–8"* 76098* 3/8" $ 67.00 10"&12"* 76098-12* 3/8" $ 77.00 8" 76098-8 1/2" $ 75.00 10"&12" 76098-11 1/2" $ 86.00

*After 2014, the 8”-12” valve plug hole increased from 3/8" to 1/2"

BREAK-OFF PLUG Discount Code A

80DI8R-8 Round Short Threads - High strength epoxycoated ductile iron body, disc and follower with threaded female xfemale 8 round short connection. Features a NITRILE (Buna-N)seal, stainless steel spring fasteners and ductile iron poppet.Designed for vertical applications.Temp Max: 180°F (80C) Pressure Max: 600 PSIShort Threads - consult factory for standard threads SIZE PART NO. WGT. LIST PRICE

3" 7938-1 15 $ 500.00 4" 7939-1 25 $ 750.00 5" 4088-1 46 $ 1,400.00 6" 4089-1 66 $ 1,700.00 8" 4090-1 93 $ 3,000.00

To order with break-off plug, add “PLG” to part number for 3"-8" and add $100.00 to list price of valve, $75.00 added forcomposite plug installed and add “PPLG” to end of part number.

80DI8R Discount Code A

COMPOSITE BREAK-OFF PLUG- Threaded 3/8" to installinto valve. When broken off, riser pipe drains.Temp Max: 180°F (80C) Pressure Max: 600 PSI

SIZE PART NO. WGT. LIST PRICE 3"–6" 76098P .1 $ 23.00

* One size fits all break-off is for 6” size valves and markedwhere to cut for smaller 3” & 4” size valves.

COMPOSITEBREAK-OFF PLUG Discount Code A

80DIX Discount Code A

80DIB- Standard high strength epoxy coated ductile iron bodywith 1/8" tapped hole on inlet side and 1/4" tapped hole on theoutlet side. Note: 1" through 11/2" features acetal poppet.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY LIST PRICE

1" 4051DI 1 50 $ 44.30 11/4" 4052DI 1.6 36 $ 56.20 11/2" 4053DI 2.4 25 $ 73.17 2" 4054DI 5 16 $ 121.72 21/2"* 4055DI 7 $ 352.66 3"* 4056DIX* 10 $ 454.61 4"* 4057DIX* 19 $ 585.80

* 80DIX double guided poppet. Can be installed vertical or horizontal.

80DIA- Standard high strength epoxy coated ductile iron bodywith 1/8" tapped hole on the inlet side. Note: 1" through 11/2" features acetal poppet.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 4041DI 1 50 $ 44.30 11/4" 4042DI 1.6 36 $ 56.20 11/2" 4043DI 2.4 25 $ 73.17 2" 4044DI 5 16 $ 121.72 21/2"* 4045DI 7 $ 352.66 3"* 4046DIX* 10 $ 454.61 4"* 4047DIX* 19 $ 585.80

* 80DIX double guided poppet. Can be installed vertical or horizontal.

80DIA Discount Code A 80DIB Discount Code A

5

80DICLVFD- Ductile iron check valve incorporates grooved lock-ing type pipe connections called Certa-Lok®. Fusion epoxy coatedinside and out including poppet assembly, this valve is corrosionresistant and unleaded. High strength ductile iron body with stain-less steel spring and NITRILE (Buna-N) seal.Also available in all 316SS, Model 80S6CLVFD. See Page 10.


SIZE PART NO. WGT. LIST PRICE 2"* 7937CLVFD* 2.5 $ 300.00 2" 7937CLSVFD 2.5 $ 330.00 3"* 7938CLVFD* 10 $ 365.00 3" 7938CLSVFD 10 $ 400.00 4" 7939CLVFD 27 $ 560.00 5" 4088CLVFD 32 $ 975.00 6" 4089CLVFD 47 $ 1,500.00 8" 4090CLVFD 90 $ 2,400.00

80MDICLVFD- Ductile iron check valve uses groove lock typepipe connection on outlet end, and male pipe thread for the inletconnection. Materials are the same as the 80DICLVFD.

SIZE PART NO. WGT. LIST PRICE 2"* 7937MCLVFD* 2.5 $ 300.00 2" 7937MCLSVFD 2.5 $ 330.00 3"* 7938MCLVFD* 10 $ 365.00 3" 7938MCLSVFD 10 $ 400.00 4" 7939MCLVFD 27 $ 560.00 5" 4088MCLVFD 32 $ 975.00 6" 4089MCLVFD 47 $ 1,500.00 8" 4090MCLVFD 90 $ 2,400.00

Certa-Lok® is a registered trademark with North AmericanSpecialty Products.

To order with break-off plug, add “PLG” to part number andadd $100.00 to list price of valve, $75.00 added for compositeplug installed and add “PPLG” to end of part number.

*Not for horizontal installation. See 7938CLSVFD, 7938MCLSVFD,7937CLSVFD or 7937MCLSVFD.

80DI Turbo- Patented high efficiency ductile iron check valve.Threaded female x female connection. High strength ductile ironbody and poppet, stainless steel spring and screws, stainless steelshaft and with a NITRILE (Buna-N) Seal Disc. (No “O”-Ring Seals)Temp Max: 180°F (80C) Pressure Max: 400 PSI

SIZE PART NO. WGT. LIST PRICE 10" 4091T 155 $ 6,500.00

80DI Turbo Discount Code A 80DICLVFD Discount Code A

82DP- Dual purpose compact ductile iron reduced ported checkvalve with male and female threads on both ends. High strengthductile iron body and poppet, with stainless steel spring and fasteners. Designed to fit into tight fitting wells.Temp Max: 180°F (80C) Pressure Max: 400 PSI

SIZE PART NO. WGT. LIST PRICE21/2" F & 3" M* 4094DP* 7 $ 328.00

3" F & 4" M 4095DP 10 $ 415.004" F & 5" M 4096DP 25 $ 785.005" F & 6" M 4097DP 51 $ 1,200.00

Same valve as 82, extra female (internal) threads.

Note: RESTRICTED FLOW - REDUCED PORTED, SEE VFD MODEL FOR FULLPORTED, HIGH FLOW DESIGN.

* Unleaded Bronze Poppet

82DP (replaces 82) Discount Code A

100% Fusion Bonded Epoxycoated with NSF/ANSI 61

approved powder with quality coating operation.

80MDI-VFD- High strength epoxy coated ductile iron body, high strength poppet and guide with threaded male x female NPTconnection. Features a NITRILE (Buna-N) seal, stainless steel shaft,and ductile iron poppet. Designed for vertical or horizontal appli-cations. Full ported valve.Temp Max: 180°F (80C) Pressure Max: 600 PSI SIZE PART NO. WGT. LIST PRICE

11/4"M x 1"F 4221DIVFD 1 $ 30.0011/4"M x 11/4"F 4242DIVFD 1.2 $ 43.002"M x 2"F* 4084VFD* 4 $ 212.002"M x 2"F 4084SVFD 4 $ 233.003"M x 3"F 4083VFD 14 $ 400.004"M x 4"F 4077VFD 22 $ 565.005"M x 5"F 4075VFD 23 $ 990.006"M x 5"F 4087VFD 48 $ 1,029.006"M x 6"F 4081VFD 50 $ 1,140.00

To order with break-off plug, add “PLG” to part number for 2”-6” and add $100.00 to list price of valve, $75.00 added forcomposite plug installed and add “PPLG” to end of part number.

*Not for horizontal installation, see 4084SVFD.

80MDI-VFD Discount Code A

82DI-VFD Discount Code A

82DI-VFD - High strength epoxy coated ductile iron body, poppet and stainless steel guide with threaded male x male con-nection. Features a NITRILE (Buna-N) seal, stainless steel shaft,and ductile iron poppet. Designed for vertical or horizontal appli-cations.Temp Max: 180°F (80C) Pressure Max: 600 PSI

SIZE PART NO. WGT. LIST PRICE

2"M x 2"M* 4093VFD* 3 $ 182.762"M x 2"M 4093SVFD 3 $ 201.003"M x 3"M* 4094VFD* 6 $ 352.003"M x 3"M 4094SVFD 6 $ 387.004"M x 4"M 4095VFD 12 $ 567.005"M x 5"M 4096VFD 27 $ 869.006"M x 6"M 4097VFD 40 $ 1,841.008"M x 8"M 4098VFD 63 $ 2,455.00

To order with break-off plug, add “PLG” to part number and add $100.00 to list price of valve, $75.00 addedfor composite plug installed and add “PPLG” to end of partnumber.

* Not for horizontal installation, see 4094SVFD & 4093SVFD.

80SL Slim Line® - Epoxy coated carbon Steel threaded valvebody with all 316 stainless steel internals. Nitrile nylon seal fea-tures a small OD body dimension.Temp Max: 200°F Pressure Max: 450 PSI

SIZE PART NO. WGT. LIST PRICE 2" 7937SL 5 $ 575.00 3" 7938SL 8 $ 705.00 4" 7939SL 18 $ 1,083.00 5" 4088SL 21 $ 1,700.00 6" 4089SL 36 $ 2,550.00 8" 4090SL 64 $ 4,322.00

80 Slim Line® Discount Code A

DU

CTIL

E I

RO

N C

HECK

®VA

LVES

800.8

33.2

040


www.watersystemscouncil.org

100MSS - All 303 stainless steel body, threaded male xfemale connection. Features a high strength delrin poppet, stain-less steel spring with a NITRILE (Buna-N) seal.


SIZE PART NO. CASE QTY. LIST PRICE3/4"M x 3/4"F* 4218SS* 100 $ 93.111"M x 1"F 4220SS2VFD 50 $ 63.1611/4"M x 1"F 4221LSS2 50 $ 51.0011/4"M x 11/4"F 4242SS2 50 $ 63.6311/4"M x11/4"F 4242LSS2 50 $ 65.50

80SS/100SS - All 303 stainless steel one piece body. Stainless steelspring with a NITRILE (Buna-N) seal. Threaded female x female connection.Temp Max: 180°F (80C) Pressure Max: 400 PSI

SIZE PART NO. STYLE WGT. CASE QTY. LIST PRICE

1" 4031SS2 80 1 50 $ 49.50 1" 4201SS2 100 1 50 $ 49.50 1" 4201LSS2 100 1 50 $ 57.20 11/4" 4202SS2 100 2 36 $ 69.77 11/4" 4032SS2 80 2 36 $ 73.30 11/2" 4033SS2 80 2 25 $ 94.99 2" 4034SS2 80 3 16 $154.73

100SSVFD - All 304 stainless steel female x female threaded valvebody features patented VFD design with stainless steel spring, delrin poppet with a NITRILE (Buna-N) seal.

SIZE PART NO. WGT. CASE QTY. LIST PRICE 1" 4201SS2VFD 1 50 $ 59.0011/4" 4202SS2VFD 2 36 $ 83.0011/2" 4203SS2VFD 2 36 $ 114.00

For SS poppet, add “S” between 2 and V of the part number andadd 10%.

100MSS Discount Code A

* Made from bar stock, with a viton seal

80SS/100SS Discount Code A

6

80SS 100SS

STA

INLE

SS S

TEEL C

HECK

VA

LVES 8

00.8

33

.2040

80SSAVFD Discount Code A

80SSVFD WITH A TAPS - All 304 stainless steel female xfemale threaded check valve body features a high strength patent-ed guide with stainless steel spring, delrin poppet and a NITRILE(Buna-N) seal. This valve has a 1/8" drilled and tapped hole on theinlet side.


80SSAVFD with a 1/8" Tapped Hole on the Inlet Side


1" 4041SS2VFD 1.2 36 $ 75.61 11/4" 4042SS2VFD 1.5 36 $ 101.53 11/2" 4043SS2VFD 2.4 25 $ 134.96 2”* 4044SS2* 3 16 $ 201.00 80SSAVFD with a 1/4 " Tapped Hole on the Inlet Side


1" 7981SS2VFD 1.2 36 $ 75.61 11/4” 7983SS2VFD 1.5 36 $ 101.53 11/2” 7985SS2VFD 2.4 25 $ 134.96 2”* 7987SS2* 3 16 $ 201.00

80SSAVFD with a 1/8" Tapped Hole on the Outlet Side SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 8981SS2VFD 1.2 36 $ 75.61 11/4” 8982SS2VFD 1.5 36 $ 101.53 11/2” 8983SS2VFD 2.4 25 $ 134.96 2"* 8984SS2* 3 16 $ 201.00

80SSXAVFD with a 1/4 " Tapped Hole on the Outlet Side SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 7982SS2VFD 1.2 36 $ 75.61 11/4” 7984SS2VFD 1.6 36 $ 101.53 11/2” 7986SS2VFD 2.4 25 $ 134.96 2”* 7988SS2* 3 16 $ 201.00*Non VFD design

NEW!

80SSBVFD -All 304 stainless steel female x female threadedcheck valve body features a high strength patented guide withstainless steel spring, delrin poppet and a NITRILE (Buna-N) seal.This valve has two drilled and tapped holes; 1/8" inlet side and1/4"outlet side.

80SSBVFD Discount Code A

SIZE PART NO. WGT. CASE QTY. LIST PRICE 1" 4051SS2VFD 1 36 $ 82.51 11/4" 4052SS2VFD 1.5 36 $ 107.97 11/2" 4053SS2VFD 2.3 25 $ 140.58 2”* 4054SS2* 2.9 16 $ 207.00

80SSBVFD with 1/4" Tapped Holes on Both Ends SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 7971SS2VFD 1 36 $ 82.51 11/4" 7972SS2VFD 1.5 36 $ 107.97 11/2" 7973SS2VFD 2.3 25 $ 140.58 2”* 7974SS2* 2.9 16 $ 207.00

80SSBVFD with 1/8" Tapped Holes on Both Ends SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 7951SS2VFD 1 36 $ 82.51 11/4" 4052SS2VFD 1.5 36 $ 107.97 11/2" 7953SS2VFD 2.3 25 $ 140.58 2”* 795 4SS2* 2.9 16 $ 207.00*Non VFD design


NEW!

80SSCVFD Discount Code A

80SSXBVFD Discount Code A

80SSXBVFD - All 304 stainless steel female x female thread-ed check valve body features a high strength patented guide withstainless steel spring, delrin poppet and a NITRILE (Buna-N) seal.This valve has two ¼” tapped holes on the outlet side for pressureswitch and gauge. Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 7961SS2VFD 1.2 36 $ 88.2911/4" 7963SS2VFD 1.6 36 $ 115.5311/2" 7964SS2VFD 2.3 25 $ 150.42

80SSCVFD - All 304 stainless steel female x female threadedcheck valve body features patented VFD design with stainless steelspring, delrin poppet and a NITRILE (Buna-N) seal. Control Centerwith four tapping; one 1/8" inlet side, two ¼” outlet sides, one 1/8"outlet side with a SS plug.

Temp Max: 180°F (80C) Pressure Max: 400 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 4061SS2VFD 1.2 36 $ 88.29 11/4" 4062SS2VFD 1.8 36 $ 115.53

NEW!

NEW!

www.flomatic.com

100MSSVFD - All 304 stainless steel male x female threadedcheck valve body features patented VFD design with stainless steelspring, delrin poppet and a NITRILE (Buna-N) seal. Temp Max: 180°F (80C) Pressure Max: 400 PSI

Composite Poppet & Guide SIZE PART NO. WGT. CASE QTY. LIST PRICE 1"M x 1"F 4220SS2VFD 1 50 $ 63.16 11/4"M x 1"F 4221SS2VFD 1.4 50 $ 63.7011/4"M x 11/4"F 4242SS2VFD 1.6 50 $ 76.0011/2"M x11/4"F 4223SS2VFD 1.7 36 $ 101.00

100MSSVFD Discount Code A

7

80S6 - All 316 stainless steel threaded check valve body.Stainless steel spring, poppet and a Viton seal, (Buna-N) optional.Temp Max: 400°F (200C) Pressure Max: 450 PSI

SIZE PART NO. WGT. LIST PRICE 1" 4031S6 1.1 $ 85.85 11/

4" 4032S6 1.4 $ 129.28 11/2" 4033S6 2.7 $ 167.66 2" 4034S6 4.0 $ 244.48 3" 7938S6 10 $ 851.23 4" 7939S6 25 $ 1,316.00 6" 4089S6 65 $ 4,287.00 8" 4090XSS 90 $ 6,703.00 10" 4091XSS 170 $11,950.00

80S6 Discount Code A

To order Model 80S6 with break-off plug, add “PLG” to part number for2”- 10” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.

80S6VFD - All 316 stainless steel female x female threadedcheck valve body features patented VFD design with stainless steelspring, poppet and a NITRILE (Buna-N) seal, Viton optional.Temp Max: 180°F (80C) Pressure Max: 450 PSI

SIZE PART NO. WGT. LIST PRICE 1"* 4031S6VFD* 1 $ 100.00

11/4"* 4032S6VFD* 1.3 $ 150.0011/2"* 4033S6VFD* 2.5 $ 200.00

2" 4034S6VFD 5 $ 300.00 21/2" 7936S6VFD 10 $ 629.00 3" 7938S6VFD 13 $ 1,100.00 4" 7939S6VFD 30 $ 1,600.00 5" 4088S6VFD 42 $ 3,000.00 6" 4089S6VFD 69 $ 4,900.00 8" 4090XSSVFD 95 $ 7,895.00

80S6VFD Discount Code A

82S6VFD - All 316 stainless steel threaded male x male checkvalve body features patented VFD design with stainless steelspring, poppet and a NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 450 PSI

SIZE PART NO. WGT. LIST PRICE2"M x 2"M 4093S6VFD 4 $ 925.003"M x 3"M 4094S6VFD 6 $ 1,030.004"M x 4"M 4095S6VFD 12 $ 1,250.005"M x 5"M 4096S6VFD 27 $ 1,900.006"M x 6"M 4097S6VFD 40 $ 4,200.008"M x 8"M 4098S6VFD 63 $ 5,600.00

82S6VFD Discount Code A

To order Model 80S6VFD with break-off plug, add “PLG” to part numberfor 2”- 8” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.

* Composite guide

80MS6VFD - All 316 stainless steel threaded male x femalecheck valve body features patented VFD design with stainless steelspring, poppet and a NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 450 PSI

SIZE PART NO. WGT. LIST PRICE2"M x 2"F 4084S6VFD 5 $ 400.003"M x 3"F 4083S6VFD 13 $ 1,035.004"M x 4"F 4077S6VFD 30 $ 1,820.006"M x 6"F 4081S6VFD 69 $ 4,900.00

80MS6VFD Discount Code A

To order Model 82S6VFD with break-off plug, add “PLG” to part numberfor 3”- 8” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.

To order Model 80S6MVFD with break-off plug, add “PLG” to part numberfor 2”- 6” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.

80S6CLVFD - Stainless steel check valve incorporates groovedlocking type pipe connections called Certa-Lok®. Stainless steelinside and out including poppet assembly. High strength stainlesssteel body and spring with a NITRILE (Buna-N) seal. Also avail-able in ductile iron. See Page 5.


SIZE PART NO. WGT. LIST PRICE 2" 7937S6CLVFD 4 $ 950.00 3" 7938S6CLVFD 10 $ 1,030.00 4" 7939S6CLVFD 27 $ 1,250.00 5" 4088S6CLVFD 32 $ 1,900.00 6" 4089S6CLVFD 47 $ 4,200.00 8" 4090S6CLVFD 90 $ 5,600.00

Certa-Lok® is a registered trademark with North American Specialty Products.

To order Model 80S6CLVFD with break-off plug, add “PLG” to part numberfor 3”- 8” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.

80S6CLVFD Discount Code A 80S6MCLVFD Discount Code A

80S6MCLVFD - Stainless steel check valve uses grooved lockingtype pipe connection on outlet end and male pipe thread for theinlet connection. Materials are the same as the 80S6CLVFD. Alsoavailable in ductile iron. See Page 5.


SIZE PART NO. WGT. LIST PRICE 2" 7937S6MCLVFD 4 $ 950.00 3" 7938S6MCLVFD 10 $ 1,030.00 4" 7939S6MCLVFD 27 $ 1,250.00 5" 4088S6MCLVFD 32 $ 1,900.00 6" 4089S6MCLVFD 47 $ 4,200.00 8" 4090S6MCLVFD 90 $ 5,600.00

Certa-Lok® is a registered trademark with North American Specialty Products.

Reverse combination available on the inlet side & male on outlet.

To order Model 80S6MCLVFD with break-off plug, add “PLG” to part numberfor 3”- 8” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.

ALL CHECK VALVES AVAILABLEWITH “DRAIN BACK” FEATURE

HOLE DRILLED INTO CHECKVALVES, CONSULT FACTORY

flomatic vfd

STA

INLE

SS S

TEEL

CH

ECK

VA

LVES

800.8

33.2

040

100XLSS Discount Code A

100XLSS - All 303 stainless steel. Hex shaped for easy wrench-ing, this valve features a non-spin acetal poppet, with a NITRILE(Buna-N) seal and stainless steel spring. Features extra longthreads for special bell end PVC pipe, with threaded male x femaleconnection.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

1"M x 1"F 4201XLSS2 1 36 $ 66.3111/4"M x 11/4"F 4242XLSS2 1.5 36 $ 81.61

8

816- All 316 stainless steel threaded FNPT “Y-Type” check valve.Patented Spring loaded, Teflon® soft-seated plunger with all316SS internals.Temp Max: 450°F (230C)* Pressure Max: 600 PSI* X=1 FOR STAINLESS X=2 FOR CARBON STAINLESS CARBONSIZE PART NO. WGT. LIST PRICE LISTPRICE1/4" YV2501-X-0100 1 $ 210.00 $190.003/8" YV3751-X-0100 1 $ 210.00 $190.001/2" YV5001-X-0100 1 $ 215.00 $190.003/4" YV7501-X-0100 1 $ 275.00 $240.00 1" YV0011-X-0100 2 $ 310.00 $300.0011/4" YV1251-X-0100 4 $ 435.00 $404.0011/2" YV0151-X-0100 4 $ 495.00 $420.00 2" YV0021-X-0100 7 $ 733.00 $645.00

Consult factory for pricing and other end connections and body material options.

* Pressure & temp dependent see website.

816HS Discount Code B

816HS- Same body as Model 816 with heavy spring for highercracking pressure.SIZE PART NO. CRACKING PRESSURE LIST PRICE1” YV001110107-08 8 PSI $345.001” YV001110107-10 10 PSI $345.001” YV001110107-15 15 PSI $345.001” YV001110107-20 20 PSI $345.001” YV001110107-30 30 PSI $345.00

Consult factory for pricing and other sizes and body materials.

*Note: the last 2 digits are the weight of the spring.

816FL- All 316 stainless steel flanged “Y-Type” check valve.Patented Spring loaded, Teflon® soft-seated plunger, optionalencapsulated spring, with all 316SS internals.Temp Max: 450°F (230C)* Pressure Max: 600 PSI* X=1 FOR STAINLESS X=2 FOR CARBON STAINLESS CARBON SIZE PART NO. WGT. LIST PRICE LIST PRICE 1" YV0014-X-0100 5.5 $ 630.00 $ 571.0011/4" YV1254-X-0100 8 $ 791.00 $ 676.0011/2" YV0154-X-0100 10 $ 937.00 $ 779.00 2" YV0024-X-0100 15 $1,200.00 N/A

Consult factory for pricing and other sizes and body materials.

* Pressure & temp dependent see website.

816FL Discount Code B816 Discount Code B

1 - THREADED N.P.T.2 - SOCKET WELD SCH. 80 add 10%3 - BUTT WELD SCH. 80 add 10%4 - FLANGED END 150# CLASS5 - BSPP6 - PN 10

1 - 316 STAINLESS STEEL2 - WCB STEEL - (carbon steel)3 - ALLOY 204 - MONEL5 - HASTELLOY C

01 - PTFE AND SEAL02 - METAL SEAT GRAPHITE SEAL add 10%03 - STRAINER TEFLON CAP SEAL add 5%04 - STRAINER GRAPHITE CAP SEAL add 5%

00 - STANDARD01 - SCH. 40 WELD ENDS02 - SCH. 5 WELD ENDS03 - DEGREASING add 20%05 - TEFLON COATED07 - NON STANDARD CRACK PRES.

How to Order Ward ValveHow to Order Ward Valve

VISIT OUR WEBSITE AT

www.flomatic.com

OUR WEBSITE NOW FEATURING:

LIVECHAT

3DANIMATIONS

SHIPMENTTRACKING

UPDATEDPRODUCT

APPROVAL

FLOMATIC VALVES IS AN ACTIVE MEMBER INTHESE INDUSTRY ASSOCIATIONS AND OTHERS


STA

INLE

SS S

TEEL

CH

ECK

VA

LVES 8

00.8

33.2

040


812X Discount Code B

812X WAFER STYLE CHECK VALVE- All 316 stainlesssteel, wafer connection ANSI 150/300. Metal to metal seatingon 812X model.Temp Max: -20° F (-30C) to 660° F (350C)*Pressure Max: Metal Seating 600 PSI*NSF/ANSI 61 Certified by IAPMO R&T, 2”-8”812X - No Flange Face Seal SIZE PART NO. WGT. LIST PRICE 1/2" 2420X .2 $ 89.00 3/4" 2421X .3 $ 118.00 1" 2422X .5 $ 138.00 11/4" 2423X .7 $ 182.00 11/2" 2424X 1.4 $ 269.00 2" 2425X 2.3 $ 313.00 21/2" 2426X 3.9 $ 372.00 3" 2427X 5.4 $ 472.00 4" 2428X 7.8 $ 629.00 5" 2429X 20 $ 2,305.00 6" 2430X 32 $ 2,909.00 8"** 2431X** 67 $ 5,050.00 8" 2432X 64 $ 5,500.00

*Consult factory for temp. & pressure rating. **230 PSI Max

812XT- All 316 stainless steel, threaded 3 piece check valve andbody. Metal to metal seating, teflon O-ring. 1 1/2"–8" availablewith NITRILE (Buna-N) or VITON seal, add 10% to list price. 2"–6"available with socket weld connection, add 25% to list.Temp Max: Metal Seating only 400°F (200C)* Pressure Max: 300 PSI*

SIZE PART NO. WGT. LIST PRICE 1/2" 2420XT .9 $ 125.00 3/4" 2421XT 1.5 $ 145.00 1" 2422XT 2.1 $ 179.00 11/4" 2423XT 3.5 $ 271.00 11/2" 2424XT 5.3 $ 350.00 2" 2425XT 7.5 $ 484.00 21/2" 2426XT 19 $ 597.00 3" 2427XT 24 $ 868.00 4" 2428XT 38 $ 1,440.00 5" 2429XT 60 $ 2,585.00 6" 2430XT 77 $ 3,675.00 8"** 2431XT** 136 $ 6,134.00Note: Add V (Viton) or R (Buna-N) to part #. *Consult factory for temp. & pressure rating. **230 PSI Max

Also available with Socket Weld (XS) ends.

Note: replacement for center part of valve. Consult factory

812XT Discount Code B

9

STA

INLE

SS S

TEEL

CH

ECK

VA

LVES

800.8

33.2

040

888S6R/888S6 Discount Code B

888S6R/888S6- Patented design, all 316 stainless steelbody. Wafer connection ANSI 150#/300#, 2”- 6”. Drip tight seal-ing. For metal to metal seating use 888S6 and NSF/ANSI 61 and372 approved.

Temp Max: 180°F (80C)Pressure Max: 200 PSI ANSI 150#, 400 PSI ANSI 300#

888S6 optional - Metal to Metal seat not drip tightSIZE PART NO. WGT. LIST PRICE

2" 2434S6 5 $ 440.00 21/2" 2432S6 7 $ 510.00 3" 2435S6 11 $ 616.00 4" 2436S6 18 $ 845.00 6" 2437S6 36 $ 1,341.00 8"* 2438S6* 80 $ 2,328.00 8"** 2438S6-2 80 $ 2,726.00

888S6R EPDM standard - seal drip tight SIZE PART NO. WGT. LIST PRICE

2" 2434S6R 5 $ 484.00 21/2" 2432S6R 7 $ 561.00 3" 2435S6R 11 $ 678.00 4" 2436S6R 18 $ 930.00 6" 2437S6R 36 $ 1,475.00 8"* 2438S6R* 80 $ 2,561.00 8"** 2438S6R2 80 $ 2,999.00

Note: 2''- 6'' are dual rated to fit between both ANSI class 150# &300# flanges.* ANSI 150# onlyFor viton seal add 20% to 888 list price** 300# Flanged Dimensions

402S6R/402S6 Discount Code B

402S6R/402S6- 316 stainless steel body. Flanged connectionANSI class 150# connection. Metal to metal seating with a stain-less steel spring. NSF/ANSI 61 and 372 approved (2”-12”).Temp Max: 180° F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-18"

402S6R EPDM standard - seal drip tight SIZE PART NO. WGT. LIST PRICE

2" 2239S6R 13 $ 1,000.00 21/2" 2240S6R 18 $ 1,100.00 3" 2241S6R 23 $ 1,320.00 4" 2242S6R 40 $ 1,760.00 6" 2244S6R 75 $ 3,190.00 8" 2245S6R 116 $ 4,950.00 12" 2248S6R 306 $14,300.00 14" 2249S6R 380 $ POA 16" 2250S6R 500 $ POA 18" 2251S6R 724 $ POA

402S6 optional - Metal to Metal seat not drip tight SIZE PART NO. WGT. LIST PRICE

2" 2239S6 13 $ 910.00 21/2" 2240S6 18 $ 1,000.00 3" 2241S6 23 $ 1,200.00 4" 2242S6 40 $ 1,600.00 6" 2244S6 75 $ 2,900.00 8" 2245S6 116 $ 4,500.00 12" 2248S6 306 $ 13,000.00

High Quality Valves Built to Last...www.flomatic.com

888S6VFD- 316 stainless steel VFD design with a 316 Stainlesssteel guide and seat with EPDM Elastomer disc standard, patentpending. Wafer connection ANSI 150#/300#. Temp Max: 180°F (80C)Pressure Max: 200 PSI ANSI 150#, 400 PSI ANSI 300#

SIZE PART NO. WGT. LIST PRICE 2" 2434S6VFD 5 $ 532.00 21/2" 2432S6VFD 7 $ 617.00 3" 2435S6VFD 11 $ 745.00 4" 2436S6VFD 18 $ 1,022.00 5" 2433S6VFD 25 $ POA 6" 2437S6VFD 36 $ 1,623.00 8"* 2438S6VFD* 80 $ 2,817.00 10" 2439S6VFD 129 $ POA

* ANSI 150#

888S6VFD Discount Code B

flomatic 888VFD

NEW!

NSF/ANSI 61Certified Valves

Patented

10

402BTR/402BT- Cast iron body with epoxy coating. Flangedconnection ANSI B16.1, class 125#. Metal to metal seating withstainless steel spring. NSF/ANSI 61 and 372 approved(2”-12”).Note: For rubber seal EPDM, add “R” to end of partnumber and 10% to list price.Temp Max: 180° F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24" SIZE PART NO. WGT. LIST PRICE 2" 2239BT 13 $ 340.00 21/2" 2240BT 18 $ 430.00 3" 2241BT 23 $ 480.00 4" 2242BT 40 $ 625.00 5" 2243BT 51 $ 995.00 6" 2244BT 75 $ 1,040.00 8" 2245BT 116 $ 1,700.00 10" 2247BT 194 $ 2,500.00 12" 2248BT 306 $ 4,300.00 14" 2249BT 380 $ 7,100.00 16" 2250BT 500 $10,100.00 18" 2251BT 724 $ POA 20" 2252BT 890 $ POA 24" 2254BT 1220 $ POA

Note: optional 316SS seat trim available, add ST to end of partnumber and 25% to list price. Consult factory.

402BTR/402BT Discount Code B

888VFD- Epoxy coated ductile iron VFD design with a 316Stainless steel guide and seat with EPDM Elastomer disc standard,patented. Wafer connection ANSI 150#/300#. Temp Max: 180°F (80C)Pressure Max: 200 PSI ANSI 150#, 400 PSI ANSI 300#

SIZE PART NO. WGT. LIST PRICE 2 " 2434VFD 5 $ 257.00 21/2" 2432VFD 7 $ 286.00 3" 2435VFD 11 $ 296.00 4" 2436VFD 18 $ 380.00 5" 2433VFD 25 $ 662.00 6" 2437VFD 36 $ 708.00 8"* 2438VFD* 80 $ 1,243.00 8"** 2438-2VFD** 85 $ 1,689.00 10" 2439VFD 129 $ 1,991.00

* ANSI 150#** 300# Flanged DimensionsSee page 9 for 316SS construction body.

888VFD Discount Code B

NEW!

CH

ECK

VA

LVES 8

00.8

33.2

040


Flomatic offers domestically manufactured valve products that meet the requirements under EPA State Revolving Fund (SRF) projects in compliance with the American Iron and Steel Act (AIS) requirements. Must be specified at time of order.

AIS (American Iron and Steel Act)Made in U.S.A.

402BTR2/402BT2- Cast iron body with epoxy coating.Flanged connection ANSI B16.1, class 250. Metal to metal seatingwith stainless steel spring.Note: For rubber seal NITRILE (Buna-N), add “R” to endof part number and 10% to list price.Temp Max: 180° F (80C) Pressure Max: 400 PSI: 21/2"-12", 300 PSI: 14" & 16" SIZE PART NO. WGT. LIST PRICE 21/2" 2240BT2 30 $ 825.00 3" 2241BT2 36 $ 875.00 4" 2242BT2 59 $ 1,122.00 5" 2243BT2 78 $ 1,391.00 6" 2244BT2 103 $ 1,838.00 8" 2245BT2 179 $ 3,123.00 10" 2247BT2 253 $ 4,484.00 12" 2248BT2 401 $ 7,063.00 14" 2249BT2 511 $ 9,750.00 16" 2250BT2 697 $13,407.00

402BTR2/402BT2 Discount Code B

888R/888- Patented design. Cast iron body with epoxy coat-ing. Wafer connection ANSI 125#/250#. Drip tight sealing. Formetal to metal seating use 888. NSF/ANSI 61 and 372 approved.For stainless steel trim add ST to end of part numberand 25% to list. See picture on right.Temp Max: 180°F (80C)Pressure Max: 200 PSI ANSI 125#, 400 PSI ANSI 250#

888R Standard - EPDM drip tight seal

SIZE PART NO. WGT. LIST PRICE 2" 2434R 5 $ 245.00 21/2" 2432R 7 $ 273.00 3" 2435R 11 $ 282.00 4" 2436R 18 $ 362.00 5" 2433R 25 $ 631.00 6" 2437R 36 $ 675.00 8"* 2438R* 80 $ 1,184.00

8"** 2438R-2** 85 $ 1,609.00 10"* 2439R* 129 $ 1,897.00

888 optional - Metal to Metal seat not drip tight

SIZE PART NO. WGT. LIST PRICE 2" 2434 5 $ 217.00 21/2" 2432 7 $ 243.00 3" 2435 11 $ 251.00 4" 2436 18 $ 327.00 5" 2433 25 $ 573.00 6" 2437 36 $ 600.00 8"* 2438* 80 $ 1,076.00

8"** 2438-2** 85 $ 1,488.00 10"* 2439* 129 $ 1,760.00

Note: 21/2"- 8'' are dual rated to fit between both ANSI class 125#& 250# flanges, 2”, 3” & 10” Ductile Iron, ANSI 150#/300#,consult factory for other sizes.For viton seal add 20% to 888 list price* ANSI 150#** 300# Flanged Dimensions

888R/888

Discount Code B

SPLIT DISC®- Cast iron body with epoxy coating and split discdesign. Stainless disc with wafer connection ANSI 125# flange 2”-24” EPDM, PTFE bearing. Stainless steel spring hinge pin. Lifting ringstd. above 4".Temp Max: 180°F (80C) Pressure Max: 200 PSI

SIZE 895 PART NO. WGT. LIST PRICE 2 " 3000 4 $ 188.00 21/2" 3001 6 $ 219.00 3" 3002 7 $ 236.00 4" 3003 12 $ 300.00 5" 3004 18 $ 500.00 6" 3005 20 $ 500.00 8" 3006 35 $ 744.00 10" 3007 60 $ 1,124.00 12" 3008 117 $ 1,688.00 14" 3009 120 $ 3,875.00 16" 3010 170 $ 6,250.00 18" 3011 180 $ 7,498.00 20" 3012 250 $ 9,750.00 24" 3013 360 $ 15,000.00

Consult Factory for larger sizes up to 48”.

SPLIT DISC® Discount Code B

Patented

11

78 Discount Code B 78A Discount Code B

90LS/92LS* Discount Code B 90LW/92LW* Discount Code B 90CS/92CS* Discount Code B

78- Cast iron body with epoxy coating. Flanged connection ANSIB16.1, class 125. Metal reinforced neoprene swing disc, other sealsare available that are chemically resistant especially to chlo-ramines. In-line serviceable.Temp Max: 140°F (60C) Pressure Max: 175 PSI: 3"-12", 150 PSI: 14"

SIZE PART NO. WGT. LIST PRICE 21/2" 2181 35 $ 500.00 3" 2182 38 $ 540.00 4" 2183 49 $ 690.00 6" 2185 106 $ 1,200.00 8" 2186 172 $ 2,400.00

Stainless steel seats optional on Model 92 only, add 10% to list price.*92 series 4", 6" and 8”. Epoxy coated blue. Model 90 is TNEMEC red primer N-140.

90LW/92LW*- Cast iron body with epoxy primer. MeetsAWWA C508 specifications. Flanged connection ANSI B16.1, class125, with stainless steel shaft. Metal to metal standard or NITRILE(Buna-N) seal (Please add “R” to end of part number) Featuresexternal lever and weight.For vertical installation add “V” to end part number.

Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30"

SIZE PART NO. WGT. LIST PRICE 2" 2704LW 36 $ 1,869.00 3" 2706LW 62 $ 2,016.00 4"* 3707LW* 125 $ 1,765.00 6"* 3709LW* 224 $ 2,469.00 8"* 3710LW* 345 $ 3,750.00 8"** 3710LW-18** 340 $ 4,080.00 10" 2711LW 522 $ 8,431.00 12" 2712LW 733 $ 11,781.00 14" 2714LW 1,130 $ 16,317.00 16" 2716LW 1,530 $ 21,279.00 18" 2718LW 1,903 $ POA 20" 2720LW 2,383 $ POA 24" 2724LW 3,298 $ POA 30" 2730LW 5,550 $ POA

* 92 Series** Short Body 18” Face to Face.

90CS/92CS*- Cast iron body with epoxy primer. Meets AWWAC508 specifications. Flanged connection ANSI B16.1, class 125, withstainless steel shaft. Metal to metal standard or NITRILE (Buna-N) seal(Please add “R” to end of part number) Features external lever andweight. Sealed end cushion closure system for adjustable rate of valveclosure. For vertical installation add “V” to end part number.Temp Max: 180°F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30"

SIZE PART NO. WGT. LIST PRICE 2” 2704CS 28 $ 2,677.00 3" 2706CS 75 $ 3,244.00 4"* 3707CS* 195 $ 3,654.00 6"* 3709CS* 325 $ 4,224.00 8"* 3710CS* 355 $ 5,396.00 8"** 3710CS-18** 355 $ 5,878.00 10" 2711CS 600 $ 10,710.00 12" 2712CS 825 $ 15,939.00 14" 2714CS 1,150 $ 20,475.00 16" 2716CS 1,630 $ 25,437.00 18" 2718CS 1,953 $ POA 20" 2720CS 2,470 $ POA 24" 2724CS 3,415 $ POA 30" 2730CS 5,610 $ POA


78A- Ductile iron angle body with epoxy coating. Flanged connection ANSI B16.1, class 125. Metal reinforced neopreneswing disc, other seals are available that are chemically resistantespecially to chloramines. In-line serviceable. (same as ANSI 90˚elbow dimension)Temp Max: 140°F (60C) Pressure Max: 175 PSI: 3"-12", 150 PSI: 14"

SIZE PART NO. WGT LIST PRICE 3" 2182A 38 $ 540.00 4" 2183A 49 $ 690.00 6" 2185A 106 $ 1,200.00 8" 2186A 172 $ 2,400.00 10" 2187A 335 $ 5,400.00 12" 2188A 432 $ 7,300.00 14" 2189A 690 $ 10,200.00

90LS/92LS*-Cast iron body with epoxy primer. Meets AWWAC508 specifications. Flanged connection ANSI B16.1, class 125,with stainless steel shaft. Metal to metal standard or NITRILE(Buna-N) seal (Please add “R” to end of part number) Featuresexternal lever and spring.For vertical installation add “V” to end part number.Temp Max: 180°F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30"

SIZE PART NO. WGT. LIST PRICE 2" 2704LS 46 $ 1,869.00 3" 2706LS 72 $ 2,016.00 4"* 3707LS* 119 $ 1,765.00 6"* 3709LS* 205 $ 2,469.00 8"* 3710LS* 359 $ 3,750.00 8"** 3710LS-18** 339 $ 4,080.00 10" 2711LS 537 $ 8,431.00 12" 2712LS 748 $ 11,781.00 14" 2714LS 1,165 $ 16,317.00 16" 2716LS 1,645 $ 21,279.00 18" 2718LS 1,860 $ POA 20" 2720LS 2,495 $ POA 24" 2724LS 3,440 $ POA 30" 2730LS 4,975 $ POA


93LW Discount Code B

93LW- Swing check valve with outside lever and weight. Castiron body with epoxy coated. Flanged connection ANSI B16.1,class 125. Bronze trim with stainless steel shaft. Metal to metalseating standard, rubber optional consult factory. Features external lever and weight. Imported, mainly for AG/Irrigationpurposes, not municipal.

Temp Max: 180°F (80C) Pressure Max: 200 PSI SIZE PART NO. WGT. LIST PRICE 2" 2804LW 30 $ 1,275.00 3" 2806LW 54 $ 1,375.00 4" 2807LW 85 $ 1,500.00 6" 2809LW 137 $ 1,813.00 8" 2810LW 240 $ 2,794.00 10" 2811LW 480 $ 5,285.00 12" 2812LW 700 $ 7,625.00

SW

ING

CH

ECK

VA

LVES

800.8

33.2

040

Flomatic offers domestically manufactured valve products that meet the requirements under EPA State Revolving Fund (SRF) projects in compliance with the American Iron and Steel Act (AIS) requirements. Must be specified at time of order.

All models available with limit switch, add $700 to list price and add “LS” to end of part #.

AIS (American Iron and Steel Act)Made in U.S.A.

SIZE PART NO. WGT. LIST PRICE 3"* 2382BFPI 40 $ 1,854.00 4"* 2383BFPI 68 $ 1,978.00 6" 2385BFPI 128 $ 2,720.00 8" 2386BFPI 235 $ 4,098.00 10" 2387BFPI 380 $ 6,181.00 12" 2388BFPI 620 $ 8,654.00 14" 2390BFPI 740 $ 12,517.00 16" 2391BFPI 1,035 $ 16,071.00 18" 2392BFPI 1,540 POA 20" 2393BFPI 1,835 POA 24" 2394BFPI 2,475 POA

SIZE PART NO. WGT. LIST PRICE 2" 2380 27 $ 561.00 21/2" 2381 35 $ 655.00 3"* 2382 40 $ 675.00 4"* 2383 68 $ 763.00 6" 2385 128 $ 1,238.00 8" 2386 235 $ 2,090.00 10" 2387 380 $ 3,736.00 12" 2388 620 $ 5,244.00 14" 2390 740 $ 7,800.00 16" 2391 1,035 $ 10,550.00 18" 2392 1,540 $ 12,018.00 20" 2393 1,835 $ 14,799.00 24" 2394 2,475 $ 23,438.00

Optional strainer available for foot valve operation.Domestic sizes available consult factory.

SIZE PART NO. WGT. LIST PRICE 2" 2380BF 27 $ 983.00 21/2" 2381BF 35 $ 1,075.00 3"* 2382BF 40 $ 1,090.00 4"* 2383BF 68 $ 1,266.00 6" 2385BF 128 $ 1,886.00 8" 2386BF 235 $ 3,124.00 10" 2387BF 380 $ 4,909.00 12" 2388BF 620 $ 6,915.00 14" 2390BF 740 $ 10,195.00 16" 2391BF 1,035 $ 13,225.00 18" 2392BF 1,540 POA 20" 2393BF 1,835 POA 24" 2394BF 2,475 POA

SIZE PART NO. WGT. LIST PRICE 3"* 2382LS 42 $ 1,961.00 4"* 2383LS 70 $ 2,113.00 6" 2385LS 130 $ 2,716.00 8" 2386LS 237 $ 3,561.00 10" 2387LS 382 $ 5,585.00 12" 2388LS 622 $ 7,788.00 14" 2390LS 742 $ 10,853.00 16" 2391LS 1,037 $ 14,249.00 18" 2392LS 1,542 POA 20" 2393LS 1,837 POA 24" 2394LS 2,477 POA

12

745 WITH POSITION INDICATOR AND BACKFLUSHDEVICE- 45˚ Seat Flo-Flex®, Swing Check Valve Epoxy coatedDuctile Iron Body, ANSI B16.1, class 150, ANSI/AWWA C508, witha Buna-N coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI

745 WITH BACKFLUSH DEVICE- 45˚ Seat Flo-Flex®, Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,class 150, ANSI/AWWA C508, with a Buna-N coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI

745- 45° Seat Flo-Flex®, Swing Check Valve Epoxy coatedDuctile Iron Body, ANSI B16.1, class 150, ANSI/AWWA C508, withBuna-N coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI

745PI Discount Code B745BF Discount Code B745 Discount Code B

SIZE PART NO. WGT. LIST PRICE 3"* 2382PI 40 $ 1,434.00 4"* 2383PI 68 $ 1,549.00 6" 2385PI 128 $ 2,113.00 8" 2386PI 235 $ 3,019.00 10" 2387PI 380 $ 4,510.00 12" 2388PI 620 $ 6,641.00 14" 2390PI 740 $ 9,509.00 16" 2391PI 1,035 $12,679.00 18" 2392PI 1,540 POA 20" 2393PI 1,835 POA 24" 2394PI 2,475 POA

745 WITH POSITION INDICATOR- 45˚ Seat Flo-Flex®,Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,class 150, ANSI/AWWA C508, with a Buna-N coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI

745BFPI Discount Code B


745LS Discount Code B

Add “S” to end of part number for Stainless Steel fasteners. 10% mark up to list price.For 2” NPT Stainless Steel tapped plug in cover add -2P to end of part # and $150 adder.

745 WITH LIMIT SWITCH (SPDT) - 45˚ Seat Flo-Flex®,Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,class 150, ANSI/AWWA C508, with a Buna-N coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI

745ASCSURGE STOPPER® Discount Code B

745 SURGE-STOPPER® WITH ADJUSTABLESPRING CLOSURE - 45˚ Seat Flo-Flex®, Swing Check ValveEpoxy coated Ductile Iron Body, ANSI B16.1, class 150,ANSI/AWWA C508, with Buna-N coated Disc. Surge-Stopper®

designed for high head, long pipe lines with field adjustablespring assisted closure.Temp Max: 140°F (60C) Pressure Max: 250 PSI

SIZE PART NO. WGT. LIST PRICE 3"* 2382ASC 42 $ 1,674.00 4"* 2383ASC 70 $ 1,725.00 6" 2385ASC 130 $ 2,875.00 8" 2386ASC 237 $ POA 10" 2387ASC 382 $ POA 12" 2388ASC 622 $ POA

PATENTED

SW

ING

CH

ECK

VA

LVES 8

00.8

33.2

040

208T- Corrosion resistant PVC body. Threaded female x female connection. NITRILE (Buna-N) self-cleaning ball E-Z access port with NITRILE (Buna-N) seal. Also available with socket weld–change part number from “T” to “S”–same pricing.Temp Max: 150°F (65C) Pressure Max: 100 PSI

SIZE PART NO. WGT. LIST PRICE 1" 2131T 1 $ 46.00 11/4" 2132T 1 $ 47.00 11/2" 2133T 2 $ 75.00 2" 2134T 2 $ 75.00

Note: For BSPP threads, change part number from “T” to “P”.

NOT FOR GROUND BURIAL.

13

508- Cast iron body with epoxy coating. Threaded female xfemale connection. Standard corrosion resistant phenolic “SinkingBall” 2 Bolt access cover. Also available with special “FloatingBall” for flood control or air vent application–add “FB” to partnumber and 35% to list price.Temp Max: 180°F (80C) Pressure Max: 150 PSI

SIZE PART NO. WGT. LIST PRICE 1" 3232 3.5 $ 177.00 11/4" 3233 4.5 $ 180.00 11/2" 3234 6 $ 185.00 2" 3235 8 $ 220.00 21/2" 3236 11.5 $ 528.00 3" 2044 30 $ 514.00 4"* 2045* 45 $ 950.00

Note: 3" and 4", has no access cover, quick disconnect valvesystem.*Connection is flanged ANSI 125, no floating ball available.

New stainless steel available in 2018

508 Discount Code B

408 & 4082- Cast iron body with epoxy coating and access port,flanged connection ANSI, class 125. NITRILE (Buna-N) covered metalball sinking. Stainless steel fasteners. Also available with special“Floating Ball” for flood control or air vent applications–add FB to partnumber and 35% to list price.

Temp Max: 180°F (80C) Pressure Max: 150 PSI SIZE PART NO. WGT. LIST PRICE 3" 2144–2 45 $ 620.00 3"* 3144* 45 $ 760.00 4" 2145–2 62 $ 750.00 4"* 3145* 62 $ 950.00 5" 2143 90 $ 1,500.00 6"* 3146* 102 $ 1,600.00 8"* 3147* 218 $ 2,923.00 10" 2148 355 $ 6,800.00 12" 2149 624 $ 9,500.00 14" 2150 882 $14,500.00

*AIS compliant models. Consult factory for other sizes.

408 & 4082 Discount Code B

208- Cast iron body with epoxy coating and clean-out port.Threaded female x female connection. Features NITRILE (Buna-N)“Sinking Ball”.Temp Max: 180°F (80C) Pressure Max: 150 PSI

SIZE PART NO. WGT. LIST PRICE 11/4" 2141 4.5 $ 89.00 11/2" 2142-0 9.5 $ 120.00 2" 2142 9 $ 120.00

77- Auto-Vac® Vacuum Breaker - This 1” valve is avail-able in stainless steel and PVC. All internal parts are engineeredcomposite, with a stainless steel disc and resilient seat. Used toprevent water hammer in wastewater valves.Temp Max: 180°F (80C) Pressure Max: 400 PSI

MATERIAL PART NO. CASE QTY. LIST PRICE PVC 4701P 12 $ 45.00Stainless Steel 4701SS 12 $ 55.00

77 Discount Code B

208T Discount Code B

208 Discount Code B

Pictured with optionalAuto-Vac®, add -1 to theend of Ball Check partnumber and $100 to listprice.

408 4082

408S6 Discount Code B

Horizontal installation requires a 20’ statichead on Ball Checks Recommended for flow

velocity of 3’ to 5’ per sec. For higher flow, consult factory.

Seat up Lodging of the ball below the axis. The arrow showsthe direction in which theliquid is moving.

TO AVOID OVERFLOW OF WATER RISING AND ALSO ALLOW AIR EVACUATION IN FILLING OF TANKS OR PIPES (AIR-VENT).

408S6 - All 316 Stainless steel body and access port, flangedconnection ANSI class 150. NITRILE (Buna-N) covered metal ballsinking. Stainless steel fasteners.Temp Max: 180°F (80C) Pressure Max: 150 PSI

SIZE PART NO. WGT. LIST PRICE 4"* 3145S6* 56 $ 3,700.00

*AISNote: Other sizes available at request.

NEW!

BA

LL C

HECK

VA

LVES

800.8

33.2

040

14High Quality Valves Built to Last... www.flomatic.com

Flo-E-Centric® Plug Valve with Gear Box Model 54-0 (Direct Mounted) - ANSI B16.1, class 150 Ductile ironBody ASTM A536 65-45-12. Epoxy coated, Buna-N Plug, V-TypePacking, Self Lubricating Type 316 Stainless Steel thrust bearing. Temp Max: 180°F (82C) Pressure Max: 200 PSI

SIZE PART NO. WGT LIST PRICE 3" 540000060 55 $ 594.00 4" 540000070 88 $ 769.00 6" 540000090 165 $ 1,429.00 8" 540000100 256 $ 2,079.00 10" 540000110 439 $ 3,003.00 12" 540000120 533 $ 3,960.00

Flo-E-Centric® Plug Valve with Bare Stem Model54-B - ANSI B16.1, class 150 Ductile iron Body ASTM A53665-45-12. Epoxy Powder, Buna-N Plug, V-Type Packing, SelfLubricating Type 316 Stainless Steel thrust bearing. Temp Max: 180°F (82C) Pressure Max: 200 PSI

SIZE PART NO. WGT LIST PRICE 2" FNPT 54200004B 15 $ 274.00 3" 54000006B 40 $ 517.00 4" 54000007B 71 $ 722.00 6" 54000009B 137 $ 1,364.00 8" 54000010B 190 $ 2,002.00 10" 54000011B 346 $ 2,871.00 12" 54000012B 441 $ 3,870.00

Flo-E-Centric® Plug Valve with 2” AWWA OperatingNut Model 54-4 - ANSI B16.1, class 150 Ductile iron BodyASTM A536 65-45-12. Epoxy coated, Buna-N Plug, V-TypePacking, Self Lubricating Type 316 Stainless Steel thrust bearing. Temp Max: 180°F (82C) Pressure Max: 200 PSI

SIZE PART NO. WGT LIST PRICE 2" FNPT 542000044 19 $ 303.00 3" 540000064 45 $ 567.00 4" 540000074 76 $ 726.00 6" 540000094 142 $ 1,375.00 8" 540000104 195 $ 2,035.00

Flo-E-Centric® Plug Valve Handle for 2” OperatingNut (for Model 54-4 above). - Epoxy coated.

SIZE PART NO. DESCRIPTION LIST PRICE 2" 1105-50-11 Handle (12” Long) $ 13.00 3" 1105-200-09 Handle (17” Long) $ 31.00 4" 1105-200-09 Handle (17” Long) $ 31.00 6" 1105-200-09 Handle (17” Long) $ 31.00 8" 1105-200-09 Handle (17” Long) $ 31.00

54-B Discount Code B 54-4 Discount Code B

HANDLE Discount Code B

Flo-E-Centric® Plug Valve w/Actuator - Electric actu-ated plug valve, for open/close service manual hand-wheel override. Temp Max: 180°F (82C) Pressure Max: 200 PSI

SIZE PART NO. WGT LIST PRICE 2" FNPT 542000040A 42 $ 1,898.00 3" 540000060A 78 $ 2,310.00 4" 540000070A 120 $ 3,531.00 6" 540000090A 188 $ 4,428.00 8" 540000100A 322 $ 6,269.00 10" 540000110A 478 $ 6,724.00 12" 540000120A 573 $ 7,903.00

For modulating service add smart card option to listprice and “M” to part #. Other options availableconsult factory.

See smart card option on page 16.

Plug Valve w/Act. Discount Code B

Flo-E-CentricFlo-E-Centric®®

Plug ValvePlug Valve

· ANSI/AWWA C517-09

· Epoxy coated (inside & out)

· Stainless steel thrust bearing

· V-type packing

· Ductile iron body:

ASTM A536 65-45-12

· Heavy duty Class 150# ANSI B16.5 flanged ends

· 98% welded nickel seat

· Stainless steel hardware

· 100% full ported (2” to 6”)

· Standard ported (8” to 12”)

· Spherical BUNA-N coated

DI plug

· 2” to 8” rated to 200 PSI (direct or reverse flow)

· 10” and 12” rated to 175 PSI (direct or reverse flow)

54-3 Discount Code B

Flo-E-Centric® MJ Plug with buried service gear-Series 5400 valves are Ductile iron Body Epoxy coated,Buna-N Plug, V-Type Packing, Self Lubricating Type 316Stainless Steel thrust bearing.


SIZE PART NO. WGT. LIST PRICE 6" 543000097 70 $ 1,650.00 8" 543000107 146 $ 2,112.00 10" 543000117 265 $ 3,190.00 12" 543000127 342 $ 4,070.00 14" 543000147 573 $ 6,298.00 16" 543000167 661 $ 8,041.00 18" 543000187 882 $ 11,220.00 20" 543000207 1370 $ 15,719.00 24" 543000247 2271 $25,289.00

54-0 Discount Code B

FLO

-E-C

EN

TRIC

®PLU

G V

ALV

ES 8

00.8

33.2

040

15

SIZE PART NO. WGT. LIST PRICE (Ductile Iron Disc) WITH GEAR

3" 450000060 43 4" 450000070 54 6" 450000090 74 8" 450000100 134 10" 450000110 188 12" 450000120 261 14" 450000140 380 16" 450000160 414 18" 450000180 532 20" 450000200 653 24" 450000240 739

$ 592.00$ 693.00$ 901.00$ 1,252.00$ 1,719.00$ 2,535.00$ 3,777.00$ 4,767.00$ 5,324.00$ 5,656.00$ 8,767.00

®

FLANGED BUTTERFLY VALVES

AWWA C504:

• Proof of design available upon request.

• NSF/ANSI 61 Approved.

• Fusion epoxy paint

• V-type packing

• Seat Buna-N

• Ductile Iron disc, 316SS edge

• Meets AWWA C504

MODEL 45 (Lever Operated) - Cast ductile iron flangedbody. ASTM A536 Cast ductile iron disc with stainless type 316edge. Seat standard NBR (EPDM optional) bonded and vulcanized. Designed to AWWA standard C504, class 150B. Electric/pneumatic actuation available.

Temp Max: 180°F (82C) Pressure Max: 200 PSI SIZE PART NO. WGT. LIST PRICE WITH LEVER

3" 450000061 43 $ 572.004" 450000071 54 $ 655.006" 450000091 74 $ 930.00

AZURE® Discount Code B

MODEL 45 - Electric actuated, Azure® butterfly valve, manual handwheel override for open/close service. Otheroptions available consult factory.

SIZE PART NO. WGT. LIST PRICE (Ductile Iron Disc) WITH GEAR

3" 45000006A 61 $ 2,569.00 4" 45000007A 72 $ 2,739.00 6" 45000009A 82 $ 3,512.00 8" 45000010A 165 $ 4,593.00 10" 45000011A 220 $ 5,572.00 12" 45000012A 300 $ 6,721.00 14" 45000014A 530 $ 7,924.00 16" 45000016A 564 $ 11,161.00 18" 45000018A 686 $ 13,969.00 20" 45000020A 823 POA 24" 45000024A 910 POA

For modulating service add smart card option tolist price and “M” to part #.

AZURE® BUTTERFLY w/ACTUATOR Discount Code BAZURE® Discount Code B

MODEL 45 (Gear Operated) - Ductile iron flanged body. ASTM A536 ductile iron disc with stainless type 316 steel edge. Seat, standard NBR (EPDMoptional)vulcanized.Designed toAWWA standard C504,class150B. Electric/pneumatic actuationavailable.


SMART CARD Discount Code B

SMART CARD - FCEL Electric Actuator Modulating ServicePart Numbers and Pricing. For High Performance DigitalPositioning Service. Basic 4-20ma input and output, providing450 points of resolution with Flomatic FCEL Electric Actuators.Able to be configured for 1-5V, 0-5V, 0-10V or digital com-mand. Provides default setting upon loss of command. Provideseasy setting of open/closed positions for reverse or direct acting without wiring changes.

Pricing adder $1,153.00 to install DHC Modulating com-ponents in FCEL electric actuator. To order valve withsmart card add “M” to the end of valve part number.


BU

TTERFLY

VA

LVES

800.8

33.2

040

85High Quality Valves Built to Last…

SYLAX® LUG ELECTRIC ACTUATED(SS) Discount Code B

www.flomatic.comHigh Quality Valves Built to Last... 16

SYLAX® WAFER (SS) Discount Code B

GEAROPERATOR Discount Code B

SYLAX® LUG (SS) Discount Code B

BU

TTERFLY

VA

LVES 8

00.8

33.2

040

SYLAX 3 WAFER with LEVER HANDLE For gear operatoradd ‘G’ to part #.

* For 120V on/offactuation add ‘A’

to part #.

2” S3W04 $ 106.00 $ 190.00 $ 1,472.00

2½” S3W05 $ 115.00 $ 197.00 $ 1,478.00

3” S3W06 $ 129.00 $ 213.00 $ 1,489.00

4” S3W07 $ 161.00 $ 245.00 $ 1,558.00

5” S3W08 $ 240.00 $ 329.00 $ 1,781.00

6” S3W09 $ 272.00 $ 349.00 $ 2,043.00

8” S3W10 $ 499.00 $ 615.00 $ 2,512.00

10” S3W11 $ 692.00 $ 809.00 $ 3,031.00

12” S3W12 $ 1,061.00 $ 1,201.00 $ 3,626.00

SYLAX 3 LUG with LEVER HANDLE For gear operatoradd ‘G’ to part #.

* For 120V on/offactuation add ‘A’

to part #.

2” S3L04 $ 140.00 $ 224.00 $ 1,480.00

2½” S3L05 $ 142.00 $ 226.00 $ 1,487.00

3” S3L06 $ 148.00 $ 231.00 $ 1,510.00

4” S3L07 $ 196.00 $ 280.00 $ 1,568.00

5” S3L08 $ 278.00 $ 361.00 $ 2,049.00

6” S3L09 $ 336.00 $ 413.00 $ 2,077.00

8” S3L010 $ 658.00 $ 778.00 $ 2,540.00

10” S3L011 $ 897.00 $ 1,017.00 $ 3,074.00

12” S3L012 $ 1,187.00 $ 1,327.00 $ 3,720.00

*Assumes maximum differential pressure of 50 PSI

SYLAX®3

NEW Flomatic®

SYLAX®

3, Strong DI body, EPDM vulcanized seat, SS stem and disc, 250 PSI bi-directional pressure rating, 230˚F max. temperature rating NSF/ANSI 61 certified, for use with ANSI 125/150# flanges with lockable 10 position handle ISO 5211 top flange for easy actuation, rated to 250 PSI for dead-end service.

NEW!


Size Part # List Price

GEAR OPERATORS

Valve Size Part # LIST PRICE 2-4” 149G037000 $ 91.00 5-6” 149G037001 $ 91.00 8-10” 149G037002 $ 153.00 12” 149G037004 $ 182.00

Size Part # List Price

17

CHAINWHEEL OPTION

Chainwheel Option(Use with gear option)


BU

TTERFLY

VA

LVES

800.8

33.2

040

Butterfly Valve Options – Inquire with Factory

• Gear Operator

• Chain-wheel Operator

• Shaft Extensions

• Actuation:

o Electric

> 110/120VAC standard – Inquire for other voltages

> Battery backup for power loss positioning

> ‘Smart Card’ options for valve positioning

• Basic 4-20mA input and output

• Can be configured for 1-5V, 0-5V, 0-10V or digital command

• Default setting for loss of command

• Feedback

• Repeat cycle timer

• Log rate control

o Pneumatic

> Double-acting

> Spring return

SizeSize 'OLD' 'OLD ' 'NEW' 'NEW ' SizeSize 'OLD' 'OLD ' 'NEW' 'NEW '

2" 149G011266 S3W04S3W04 2" 149G037300 S3L04S3L04

2-1/2" 149G011287 S3W05S3W05 2-1/2" 149G037302 S3L05S3L05

3" 149G011297 S3W06S3W06 3" 149GVP2047 S3L06S3L06

4" 149G011316 S3W07S3W07 4" 149G037305SH S3L07S3L07

5" 149G011334 S3W08S3W08 5" 149G037306 S3L08S3L08

6" 149G011343 S3W09S3W09 6" 149G037307 S3L09S3L09

8" 149G016281 S3W10S3W10 8" 149G037308 S3L10S3L10

10" 149G013612 S3W11S3W11 10" 149G037309 S3L11S3L11

12" 149G023904 S3W12S3W12 12" 149G037310 S3L12S3L12


2" 149G011266G S3W04GS3W04G 2" 149G037300G S3L04GS3L04G

2-1/2" 149G011287G S3W05GS3W05G 2-1/2" 149G037302G S3L05GS3L05G

3" 149G011297G S3W06GS3W06G 3" 149GVP2047G S3L06GS3L06G

4" 149G011316G S3W07GS3W07G 4" 149G037305SHG S3L07GS3L07G







2" 149G011266A S3W04AS3W04A 2" 149G037300A S3L04AS3L04A

2-1/2" 149G011287A S3W05AS3W05A 2-1/2" 149G037302A S3L05AS3L05A

3" 149G011297A S3W06AS3W06A 3" 149GVP2047A S3L06AS3L06A

4" 149G011316A S3W07AS3W07A 4" 149G037305SHA S3L07AS3L07A






110V

AC o

n/of

f elec

tric a

ctuat

or11

0VAC

on/

off e

lectri

c actu

ator

110V

AC o

n/of

f elec

tric a

ctuat

or11

0VAC

on/

off e

lectri

c actu

ator

Wafer style Cross-referenceWafer style Cross-reference Lug style Cross-referenceLug style Cross-reference

10 p

ositi

on h

andle

10 p

ositi

on h

andle

10 p

ositi

on h

andle

10 p

ositi

on h

andle

Gear

Ope

rato

rGe

ar O

pera

tor

Gear

Ope

rato

rGe

ar O

pera

tor

18

333E-ENVIRO FOOT VALVE- body with high strength acetalpoppet. Tappered stainless steel strainer, end cap, spring and fas-teners. NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 250 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 4171E .6 50 $ 55.00 11/4" 4172E .8 36 $ 65.00

60SE-ENVIRO FOOT VALVE- body with threaded female connection. Features a NITRILE (Buna-N) seal, acetal poppet (21/2",3" and 4" have bronze poppets) stainless steel spring and strainer.Temp Max: 180°F (80C) Pressure Max: 250 PSI (1/2" size 150 PSI) SIZE PART NO. WGT. CASE QTY. LIST PRICE

1/2 "* 5820E* .1 100 $ 40.00 3/4" 4100E .3 100 $ 41.00 1" 4101E .8 50 $ 46.5011/4"** 4102E** .8 50 $ 54.00

11/4" 4103E 1 36 $ 57.60 11/2" 4104E 1.6 25 $ 88.90 2 " 4105E 2.1 16 $ 138.00 21/2" 4106E 6 $ 457.00 3" 4107E 11 $ 630.00 4" 4108E 19 $ 1,050.00

*Polyethylene strainer**Model 600S (4102E) will pass through a 2" pipe.For high temperature: add HTE to the end of part # and 25% to list.

190D- Acetal body and strainer, Nylon 11 poppet.Stainless steel spring and NITRILE (Buna-N) seal.193D- Similar to the 190D with one-piece acetal body and strainer.190P- Polypropylene body and strainer. Stainless steel springand VITON seal.Temp Max: 140°F (60C) SIZE PART NO. MODEL WGT. CASE QTY. LIST PRICE

3/8" 5619 193D .03 10 $ 18.00 3/8" 5726 190P .03 10 $ 18.00 1/2 " 5620 193D .03 10 $ 31.00 3/4" 5728 190P .08 10 $ 35.00 11/2" 5724 190D .28 6 $ 39.00 2 " 5725 190D .41 6 $ 89.00

333DPE-ENVIRO FOOT VALVE- body, but with dual pur-pose male and female threads.Temp Max: 180°F (80C) Pressure Max: 250 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

11/4"M x 1"F 4181E .5 50 $ 58.0011/2"M x 11/4"F 4182E .8 36 $ 69.00

333DPE Discount Code A333E Discount Code A60SE Discount Code A

124P- FOOT VALVE- features a simple flow through designwith corrosion resistant parts and feature a tapered compositestrainer and poppet.Temp Max: 140°F (60C) Pressure Max: 150 PSI SIZE PART NO. WGT. LIST PRICE

1" - 11/4"** 5728PI .24 $ 22.003/4" - 11/2"* 5728P .31 $ 24.002" Female 5735P .25 $ 40.00

* 4 in 1 combo, male NPT threads 3/4" – 11/2"** 2 in 1 combo barbed insert 1" & 11/4"

104P- Reinforced nylon body with threaded female connection.Polyethylene strainer, polyethylene/acetal poppet. NITRILE (Buna-N) seal and stainless steel spring.Temp Max: 150°F (65C) Pressure Max: 150 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 5732 .13 50 $ 23.00 11/4" 5733 .21 36 $ 28.00

124P Discount Code A

190D/193D/190P Discount Code A


104P Discount Code A

100MP- High-strength Noryl® GTX 830 Body with NITRILE(Buna-N) seal and polypropylene follower. Threaded male xfemale connection. Temp Max: 150°F (65C) Pressure Max: 300 PSI

SIZE PART NO. CASE QTY. LIST PRICE

11/4"M x 1"F 4221MP 49 $ 23.0011/4"M x 11/4"F 4242MP 49 $ 25.00

Bulk pricing available.

100MP Discount Code A

The 297D- is an acetal body check valve. Threaded female xfemale construction. Features a VITON seal, Nylon 11 poppet and stainless steel spring.Temp Max: 180°F (80C) Pressure Max: 150 PSI


3/8" 5359 .04 $ 27.50 1/2" 5239 .06 $ 36.00

The 290P is a Polypropylene body check valve and poppet withstainless steel spring and VITON seal.


1/2" 5357 .06 $ 34.00 3/4" 5358 .06 $ 45.00

297D/290P Discount Code A

901- Non-corrosive acetal body and guide. Insert connection.Features NITRILE (Buna-N) seal and stainless steel spring.Temp Max: 180°F (80C) Pressure Max: 150 PSI


3/8" 2011 .1 $ 10.00 1/2" 2000 .18 $ 10.50 3/4" 2001 .35 $ 10.60 1" 2030 .5 $ 17.00

901 Discount Code A

FO

OT V

ALV

ES A

ND

PLA

STIC

VA

LVES 8

00.8

33.2

04

0

All foot valves are low-leadNSF/ANSI 372 approved

812XTF- All 316 stainless steel, threaded female connection.Metal to metal seating and teflon O-ring.2"-4" available with socket weld connection.Consult factory forpricing.* Temp Max: 400°F (200C) * Pressure Max: 300 PSI

SIZE PART NO. WGT. LIST PRICE 1/2 " 2420XTF 2 $ 300.00 3/4" 2421XTF 4 $ 370.00 1" 2422XTF 5 $ 551.00 11/4" 2423XTF 9 $ 671.00 11/2" 2424XTF 12 $ 744.00 2" 2425XTF 14 $ 885.00 21/2" 2426XTF 14 $ 1,548.00 3" 2427XTF 25 $ 1,783.00 4" 2428XTF 39 $ 2,030.00 5" 2429XTF 62 $ 4,323.00 6" 2430XTF 80 $ 5,148.00 8" 2431XTF 140 $ 9,000.00

* Consult factory for temp. & pressure rating.

63- Cast iron body with epoxy coating. Features threaded femaleconnection. NITRILE (Buna-N) seal, high strength non-metallic orunleaded bronze or ductile iron poppet, stainless steel spring.Heavy duty polyethylene strainer.Temp Max: 180°F (80C) Pressure Max: 250 PSI

SIZE PART NO. WGT. LIST PRICE 2"* 4764* 4 $ 100.00 21/2" 4765 5 $ 150.00 3" 4766 9 $ 180.00 4" 4767 17 $ 230.00

6"** 4789VFD** 36 $ 950.00

*2" Acetal guide.

** Galvanized Strainer Only.2 1/2 " - Unleaded bronze guide. 3"-6" Ductile iron poppet. For Municipal applications see 302BT or 302S6 below

357- Cast iron body and strainer. Threaded female connection.Hinged leather seat.Temp Max: 80°F (27C) Pressure Max: 75 PSI

SIZE PART NO. WGT. LIST PRICE 11/4" 4962 3 $ 180.00 11/2" 4963 3 $ 181.00 2" 4964 6 $ 188.00 3" 4966 13 $ 290.00 4" 4967 20 $ 400.00 6" 4969 45 $ 675.00 8" 4970 99 $ 1,475.00

357 Discount Code A 63 Discount Code B 812XTF Discount Code B

302BT- Cast iron body with epoxy coating, unleaded bronze discand seat (2"-12"). Flanged connection ANSI B16.1, class 125#.Features a EPDM O-ring and stainless steel strainer.Temp Max: 180°F (80C)Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24"

SIZE PART NO. WGT. LIST PRICE 2" 4763BT 23 $ 950.00 21/2" 4768BT 30 $ 960.00 3" 4769BT 37 $ 970.00 4" 4770BT 63 $ 1,145.00 5" 4771BT 80 $ 1,549.00 6" 4772BT 100 $ 1,744.00 8" 4774BT 160 $ 2,522.00 10" 4775BT 260 $ 3,500.00 12" 5416BT 410 $ 4,942.00 14" 5417BT 500 $ 11,000.00 16" 5418BT 650 $ 13,750.00 18" 5419BT 850 $ POA 20" 5420BT 1050 $ POA 24" 5422BT 1440 $ POA

302BT Discount Code B

80S6FVFD - Foot Valve- All 316 stainless steel threaded checkvalve body. Stainless steel spring, poppet, strainer and Buna-Nseal, Viton optional.Temp Max: 180°F (200°C) Pressure Max: 400 PSI

SIZE PART NO. WGT. LIST PRICE 1" 4031S6FVFD 2.1 $ 260.00 11/4" 4032S6FVFD 2.4 $ 350.00 11/2" 4033S6FVFD 5.0 $ 370.00 2" 4034S6FVFD 7.0 $ 570.00 3" 7938S6FVFD 15 $ 1,350.00 4" 7939S6FVFD 30 $ 2,200.00 6" 4089S6FVFD 75 $ 7,000.00 8" 4090XSSFVFD 105 $ 9,000.00 10" 4091XSSF 190 $ 15,500.00

Replaces model 80S6F

80S6FVFD Discount Code A


302S6- All 316 stainless steel body. ANSI class 150# flangedconnection. Features a EDPM seal and 304 stainless steel strainer.Temp Max: 180°F (80C) Pressure Max: 200 PSI

SIZE PART NO. WGT. LIST PRICE 2" 4763S6 23 $ 1,500.00 21/2" 4768S6 30 $ 1,650.00 3" 4769S6 37 $ 1,763.00 4" 4770S6 63 $ 2,160.00 6" 4772S6 100 $ 3,700.00 8" 4774S6 160 $ 5,900.00 12" 5416S6 410 $ 16,000.00

302S6 Discount Code B

REFER TO PAGE 35 FOR LOCAL SALES REPS BY STATE

333SS- FOOT VALVE- All 303 Stainless steel body with highstrength acetal poppet. Tappered stainless steel strainer, end cap,spring and fasteners. NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 250 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 4171SS .6 50 $ 125.00 11/4" 4172SS .8 36 $ 145.00

333SS Discount Code A

19

FO

OT V

ALV

ES

800.8

33.2

040

20

6P STRAINER- Plastic (polyethylene) with male NPT threads.Converts a check valve to a foot valve, by screwing into the valvethreads.Temp Max: 180°F (80C)

STRAINER ONLY


3/4" 4300P .1 25 $ 5.56 1" 4301P .1 25 $ 6.00 11/4" 4302P .2 25 $ 6.72 11/2" 4303P .3 10 $ 6.84

6P STRAINER Discount Code A

46 STRAINER- Cast iron body with epoxy coating. Flanged con-nection ANSI 125. Plastic 2"-4" stainless steel 5"-24" strainer.


P: Plastic screen 2"-4"

2" 5814P 4.7 $ 165.00 21/2" 5815P 6.4 $ 167.00 3" 5816P 8.8 $ 220.00 4" 5817P 13 $ 350.00

S: Stainless steel screen 5"-24"

5" 5821S 16 $ 447.00 6" 5822S 21 $ 488.00 8" 5824S 44 $ 728.00 10" 5825S 55 $ 1,300.00 12" 5826S 80 $ 1,589.00 14" 5827S 121 $ 2,524.00 16" 5828S 166 $ 3,225.00 18" 5829S 211 $ 4,043.00 20" 5830S 256 $ 4,177.00 24" 5832S 346 $ 5,513.00

46 STRAINER Discount Code B

46T STRAINER- Cast iron body with epoxy coating. Threadedfemale connection. Removable polyethylene strainer. (cutawaypicture shown)Temp Max: 180°F (80C)

SIZE PART NO. WGT. LIST PRICE 2" 4364 2.5 $ 88.00 21/2" 4365 4 $ 140.00 3" 4366 8.2 $ 145.00 4" 4367 14 $ 199.00

46T STRAINER Discount Code B

16FL STRAINER Discount Code B

16FL STRAINER- All 316 Stainless steel body, flanged with316SS internal strainer. Standard 20 mesh replacement screensoptional 40, 60, 80 and 100 mesh screens (fit inside of 20 mesh).ASME 150 Class.

Standard 20 Mesh – if optional 40, 60, 80, or 100 add toend of part number: 40 Mesh = 040 to end of part number

60 Mesh = 060 to end of part number 80 Mesh = 080 to end of part number 100 Mesh = 100 to end of part number

X in part # below 1 for stainless steel and 2 for carbon

*Temp Max: 800°F *Pressure Max: 600 PSI*See temperature/pressure rating. STAINLESS CARBON SIZE PART NO. LIST PRICE LIST PRICE 1" S0014-X-0300 $350.00 $340.00 11/2" S0154-X-0300 $630.00 $605.00 2" S0024-X-0300 $800.00 $726.00 3" S0034-X-0300 $950.00 N/A

Strainers supplied with FNPT tapped retainer cap for blow off outlet. Strainers supplied with PTFE cap seal.Optional graphite cap seal add: $15.00

16 STRAINER Discount Code B

16 STRAINER- All 316 Stainless steel body, threaded FNPT“Y-Type” strainer. Standard 20 mesh replaceable screens optional40, 60, 80 and 100 mesh screens (fit inside of 20 mesh).ASME 600 Class.

Standard 20 Mesh – if optional 40, 60, 80, or 100 add toend of part number: 40 Mesh = 040 to end of part number

60 Mesh = 060 to end of part number 80 Mesh = 080 to end of part number 100 Mesh = 100 to end of part number

X in part # below 1 for stainless steel and 2 for carbon*Temp Max: 800°F *Pressure Max: 600 PSI*See temperature/pressure rating. STAINLESS CARBON SIZE PART NO. LIST PRICE LIST PRICE 1/4" S2501-X-0300 $203.00 $ 167.00 3/8" S3751-X-0300 $203.00 $ 167.00 1/2" S5001-X-0300 $203.00 $ 167.00 3/4" S7501-X-0300 $203.00 $ 167.00 1" S0011-X-0300 $230.00 $195.00 11/4" S1251-X-0300 $275.00 $225.00 11/2" S0151-X-0300 $ 437.00 $290.00 2" S0021-X-0300 $ 576.00 $308.00

Strainers supplied with FNPT tapped retainer cap for blow off outlet. Strainers supplied with PTFE cap seal. Optional graphite list price cap sealadder: $15.00 Many different types of configurations available.

STRAINER- Threaded unleaded Bronze body (3/8" – 2"), 125#cast iron and flanged (21/2" – 12"), 20 mesh stainless steel strain-er. Furnished with clean out plug.

Pressure Max: 200 PSI (21/2" – 12") Temp Max: 180°FPressure Max: 400 PSI (3/8" – 2")

SIZE PART NO. WGT. LIST PRICE 3/8" 8711E .5 $ 32.00 1/2 " 8712E .3 $ 34.00 3/4" 8713E 2 $ 55.00 1" 8714E 4 $ 69.00 11/4" 87142E 5 $ 115.00 11/2" 87143E 6 $ 150.00 2" 87144E 9 $ 260.00 21/2" 87145 15 $ 413.00 3" 87146 25 $ 488.00 4" 87147 95 $ 813.00 6" 87148 185 $ 1,375.00 8" 87149 299 $ 2,438.00 10” 87150 372 $ 3,500.00 12” 87151 539 $ 4,875.00

www.flomatic.com

6SE STRAINER- Unleaded bronze body with threaded femaleconnection. Stainless steel strainer with unleaded bronze. Stainlesssteel or plastic caps. SIZE PART NO. WGT. CASE QTY. LIST PRICE

1/2 " 4399E .1 10 $ 30.00 3/4" 4300E .2 100 $ 37.00 1" 4301E .6 49 $ 48.00 11/4"* 4302E * .6 36 $ 67.00 11/2"* 4303E * 1.2 25 $ 79.00 2"* 4304E * 2.4 16 $ 105.00 21/2" 4305E 3 $ 278.00 3" 4306E 7.2 $ 410.00 4" 4307E 14 $ 785.00

* End caps on strainer are composite.

6SE STRAINER Discount Code A

6SS STRAINER- All 303 stainless steel body with threadedfemale connection. Stainless steel strainer with stainless steel orplastic caps. SIZE PART NO. WGT. CASE QTY. LIST PRICE

1" 4371SS .6 49 $ 140.00 11/4" 4372SS .6 36 $ 160.00

6SS STRAINER Discount Code A

STRAINERS Discount Code C

STRA

INERS 8

00.8

33.2

040

21

Rugged Dependability• Model C, full port globe style• Model CF, reduced cavitation configuration• Model CA, angle styleAlways with these standard features...• Fusion Epoxy coating – internal & external• Copper tubing (ss optional)• Control tubing isolation valves• Gauge cocks and air bleeder valve

• Valve Trim – Stainless Steel Standard Optional Unleaded Bronze• Body drain plugs• EZ off Jack screw covers & seat rings• Unleaded Pilots• NSF/ANSI 61 Approved body 11/4”-12”Can be equipped with these popular options• Dual power chamber• Built-In check feature• Stainless Steel Pilots• Electronic controls• Position indicator (standard 6” and up)

Model CA• Angle body globe style

(flanged or threaded)

Model CF• Reduced port globe style

(flanged or threaded)

• Pressure Reducing Valve• Modulating Altitude Valve • Non-Modulating Altitude Valve • Back Pressure Sustaining Valve• Pressure Relief Valve• Surge Arrestor Valve• Pump Control Valve• Pilot Operated Float Valve• Solenoid Control Valve• Flow Control• Hydraulic Check Valve

CHECK THESE FEATURES...

SEVERALDIFFERENT SERIES...

NSF/ANSI 61 approvedconsult factory for configuration and sizes

AIS compliant


Up to 36''

AIS compliant – Made in USA(Must specify on order)

Model C• Full port globe style

(flanged or threaded)®

®

CO

NTRO

L VA

LVES

800.8

33.2

040

BACK PRESSURE SUSTAINING VALVE - Sustains a minimum upstream pressure to prevent overdrafting the supply.

11/4" $1,49511/2" $1,504 $ 1,770 $ 1,8252" $1,539 $ 1,801 $ 1,88621/2" $1,913 $ 1,885 $ 2,047 $ 2,1853" $1,977 $ 2,097 $ 2,210 $ 2,3124" $ 2,320 $ 2,985 $ 3,1836" $ 3,228 $ 4,391 $ 4,7178" $ 5,073 $ 7,182 $ 7,78510 $ 7,463 $ 9,924 $ 10,80312" $ 12,457 $ 15,393 $ 16,02114" POA POA POA16” POA POA POA18" POA POA POA20" POA POA POA

* Reduced cavitation configuration.

22

C301/CA301 Discount Code B

C101 THREADED/CF101/C101/CA101 C103/CA103 Discount Code BDiscount Code B

PRESSURE REDUCING VALVE WITH CHECK - Reduceshigh upstream pressure to lower downstream pressure.

11/2" $2,330 $2,200 $2,4652"

21/2" 3" 4" 6" 8" 10" 12" 6" 8" 10" 12"


NON-MODULATING ALTITUDE VALVE - Single Acting.Level control of storage tanks, reservoirs, and basins.

SIZE THREADED C/CA C/CACF MODEL* C FLANGED C FLANGED

150# 150# 300#



C/CA C/CA SIZE THREADED CF MODEL* C FLANGED C FLANGED 150# 150# 300#

SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE150# 150#

11/2"

3"

4"

6"

8"

10"

12"

14"

16"

18"

20"


C/CAC THREADED

CF FLANGED*

11/4"

21/2 "

2"

PRESSURE REDUCING VALVE - Reduces high upstream pressure to lower downstream pressure. Part numbers below are for standardC101 valve set at 25-125 PSI. Consult factory for other options.

C/CAC FLANGED

150#

C/CAC FLANGED

300#


11/2"2"21/2"3"4"6"8"10"12”14”16”18”20”

11/2" $ 3,683 $ 3,950 $ 4,1072" $ 4,060 $ 4,157 $ 4,32321/2" $ 4,397 $ 4,132 $ 4,603 $ 4,7853" $ 4,769 $ 4,276 $ 4,660 $ 4,8444" $ 5,039 $ 5,451 $ 5,6636" $ 5,669 $ 6,748 $ 7,0138" $ 7,250 $ 9,701 $10,08310" $ 9,795 $10,702 $ 11,12412" $14,863 $16,454 $16,91614" POA POA POA16" POA POA POA18" POA POA POA20" POA POA POA

C/CAC FLANGED

300#CF MODEL*

150#SIZE

C/CAC FLANGED

150#


MODULATING ALTITUDE VALVE - Single acting level control with modulation for final filling of storage tanks.

SIZE THREADED CF MODEL* C/CA C/CA 150# C FLANGED C FLANGED 150# 300#11/2" $2,330 $2,200 $2,4652"

21/2" 3" 4" 6" 8" 10" 12" 6" 8" 1" 12"


11/2"2"21/2"3"4"6"8"10"12”14”16”18”20”

C/CA C/CASIZE THREADED CF MODEL* C FLANGED C FLANGED

150# 150# 300#

NEW LARGER SIZES IN STOCK – 16”, 20”, 24 ”, & 30”

C101B0B00130

C101C0B00130

C101D0B00130

C101E0B00130

C101F0B00130

$1,426

$ 1,451

$1,462

$ 1,821

$ 1,951

$ 1,823

$ 1,858

$ 1,986

$ 3,012

$ 4,881

$ 7,155

$ 11,557

POA

POA

POA

POA

CF101E1B00130CF101F1B00130CF101G1B00130CF101J1B00130CF101K1B00130CF101L1B00130CF101M1B00130CF101N1B00130CF101O1B00130CF101P1B00130CF101Q1B00130

$ 2,106$ 2,141$ 2,269$ 3,295$ 5,319$ 7,593$ 11,994

POAPOAPOAPOA

$ 1,735$ 1,745$ 2,104$ 2,234

$ 2,072$ 2,210$ 2,475$ 2,519$ 3,029$ 4,628$ 7,780$ 10,917$16,883

POAPOAPOAPOA

$ 1,836$ 2,126$ 2,217$ 2,261$ 2,826$ 4,299$ 7,173$ 10,015$ 15,881

POAPOAPOAPOA

$ 4,035$ 4,174$ 4,920$ 5,536$ 7,080$ 9,565$14,514

POAPOAPOAPOA

$ 3,598$ 3,965$ 4,294$ 4,657

$ 3,978$ 4,343$ 4,809$ 4,756$ 5,695$ 7,050$ 10,135$ 11,180$16,998

POAPOAPOAPOA

$ 3,742$ 4,060$ 4,494$ 4,549$ 5,324$ 6,588$ 9,471$ 10,449$ 15,886

POAPOAPOAPOA

11/2" C101C1B00130 $ 1,553 C101C2B00130 $1,789

2" C101D1B00130 $ 1,843 C101D2B00130 $1,927

21/2" C101E1B00130 $ 1,933 C101E2B00130 $2,192

3" C101F1B00130 $ 1,978 C101F2B00130 $2,236

4" C101G1B00130 $ 2,543 C101G2B00130 $2,746

6" C101J1B00130 $ 4,016 C101J2B00130 $4,345

8" C101K1B00130 $ 6,735 C101K2B00130 $7,342

10" C101L1B00130 $ 9,577 C101L2B00130 $10,479

12" C101M1B00130 $15,443 C101M2B00130$16,445

14" C101N1B00130 POA C101N2B00130 POA

16" C101O1B00130 POA C101O2B00130 POA

18" C101P1B00130 POA C101P2B00130 POA

20" C101Q1B00130 POA C101Q2B00130 POA


CO

NTRO

L VA

LVES 8

00.8

33.2

040

PRESSURE RELIEF VALVE - Protects against excessivepressure.

SIZE C THREADED CF FLANGED* C FLANGED C FLANGED 150# 150# 300#

11/4" $1,49511/2" $1,504 $ 1,770 $ 1,8252" $1,539 $ 1,801 $ 1,88621/2" $1,913 $ 1,885 $ 2,047 $ 2,1853" $1,977 $ 2,097 $ 2,210 $ 2,3124" $ 2,320 $ 2,985 $ 3,1836" $ 3,228 $ 4,391 $ 4,7178" $ 5,073 $ 7,182 $ 7,785 10” $ 7,463 $ 9,924 $ 10,80312" $ 12,457 $ 15,393 $ 16,02114" POA POA POA16” POA POA POA18" POA POA POA20" POA POA POA




C621 Discount Code B


23www.flomatic.com

SURGE ARRESTOR VALVE - Provides relief protection against pressure surges during pump start up, shut down, or powerfailure.


11/2" $ 3,747 $ 4,450 $ 4,701 2" $ 4,265 $ 4,683 $ 4,948 21/2 $ 4,670 $ 4,597 $ 4,967 $ 5,224 3" $ 4,719 $ 4,753 $ 4,982 $ 5,243 4" $ 5,031 $ 5,309 $ 5,498 6" $ 5,730 $ 6,547 $ 6,856 8" $ 7,405 $ 9,146 $ 9,71910" $ 9,867 $ 12,345 $ 13,17812" $ 15,354 $ 18,152 $ 18,77914" POA POA POA16" POA POA POA18" POA POA POA20" POA POA POA

Pump Control Valve Modulating With Dual PowerChamber- Eliminates pump station pressure surges during start upand shut down.

C/CA C/CA SIZE CF FLANGED C FLANGED C FLANGED 150# 150# 300#

3" $ 5,200 $ 5,618 $ 6,077 4" $ 5,839 $ 6,103 $ 6,843 6" $ 7,029 $ 7,852 $ 8,330 8" $ 8,666 $10,800 $11,443 10" $13,878 $16,630 $18,545 12" $21,084 $23,513 $25,114 14" POA POA POA 16" POA POA POA 18" POA POA POA 20" POA POA POA


PUMP CONTROL VALVE - Eliminates pump station pressuresurges during start up and shut down.

SIZE CF FLANGED* C FLANGED C FLANGED 150# 150# 300# 11/2" $ 3,615 $ 3,843 2" $ 3,912 $ 4,195 21/2" $ 3,899 $ 4,341 $ 4,646 3" $ 4,176 $ 4,593 $ 5,052 4" $ 4,814 $ 5,078 $ 5,818 6" $ 6,004 $ 6,827 $ 7,305 8" $ 7,642 $ 8,489 $ 9,258 10" $12,421 $14,122 $16,644 12 $17,823 $20,475 $21,907 14" POA POA POA 16" POA POA POA 18" POA POA POA 20" POA POA POA


C/CA C/CAC/CA C/CA


PILOT OPERATED FLOAT VALVE - For level control of storagetanks, reservoirs, or basins.

C/CA C/CA SIZE C THREADED CF FLANGED* C FLANGED C FLANGED 150# 300#

11/4" $1,77211/2" $1,772 $ 1,911 $ 2,1342" $1,803 $ 2,185 $ 2,26521/2" $2,153 $ 2,165 $ 2,270 $ 2,4253" $2,191 $ 2,201 $ 2,312 $ 2,5094" $ 2,319 $ 2,997 $ 3,1896" $ 3,294 $ 4,235 $ 4,5448" $ 5,054 $ 6,799 $ 7,373

10" $ 7,197 $ 9,499 $10,33312" $12,003 $15,334 $15,96114" POA POA POA16" POA POA POA18" POA POA POA20" POA POA POA

* Reduced cavitation configuration.Made inUSA____AIS

Compliant


C/CA C/CASIZE C THREADED CF FLANGED* C FLANGED C FLANGED 150# 150# 300#

10 Reasons to SelectFlomatic’s Automatic

Control Valves

1 NSF/ANSI 61 body 11/4”-12”*

2 Isolation Valves Standard

3 Drain Plug Standard

4 Test Cocks Standard

5 All SS-Fasteners Standard

6 Jack Screws Standard

7 Indicator Rod Standard 6” and up

8 Air Bleed Valve Standard

9 Low Headloss

10 100% Water TestedCONTACT FACTORY FOR

� COMPLETE PRICE LISTS � CONTROL VALVE TECHNICAL BINDER� CD DISC

*consult factory for configuration


CO

NTRO

L VA

LVES

800.8

33.2

040


24


HYDRAULIC CHECK VALVE - Closes to prevent flow reversal.Adjustable opening & closing speed controls.


11/2" $1,281 $ 1,354 $ 1,5772" $1,359 $ 1,627 $ 1,70821/2" $1,647 $ 1,608 $ 1,760 $ 1,9993" $1,747 $ 1,758 $ 1,855 $ 2,0934" $ 1,884 $ 2,417 $ 2,6086" $ 2,927 $ 3,678 $ 3,9878" $ 4,811 $ 6,600 $ 7,17410" $ 7,103 $ 8,941 $ 9,77612" $ 12,247 $ 14,947 $15,57614" POA POA POA16" POA POA POA18" POA POA POA20" POA POA POA

C/CA C/CA

FLOW CONTROL VALVE - Maintains a pre-set maximumflow rate regardless of changing line pressures. .

SIZE CF FLANGED* C FLANGED C FLANGED 150# 150# 300#


11/2" $ 2,213 2" $ 2,285 $ 2,34421/2" $ 2,640 $ 3,300 $ 3,522 3" $ 2,680 $ 3,410 $ 3,539 4" $ 2,955 $ 4,072 $ 4,263 6" $ 4,357 $ 5,441 $ 5,752 8" $ 6,278 $ 8,210 $ 8,78310" $ 8,177 $ 11,318 $ 12,15512" $12,992 $ 16,640 $ 17,26814" POA POA POA16" POA POA POA18" POA POA POA20" POA POA POA

316SS BALL VALVE Discount Code B

316SS BALL VALVE - Full Port, FNPT connection, drilled andtapped for 2 bolt mounting pad, SS locking handle.Temp Max: 400° F Pressure Max: 1000 PSI

SIZE PART NUMBER LIST PRICE1/4" SSBV1000-02 $ 27.003/8" SSBV1000-03 $ 27.001/2" SSBV1000-05 $ 32.003/4" SSBV1000-07 $ 43.001" SSBV1000-10 $ 66.00

11/4" SSBV1000-12 $ 99.0011/2" SSBV1000-15 $ 143.002" SSBV1000-20 $ 209.00

PRESSURE GAUGES - 2.5 inch dial, 1/4" MPT bottom connection, unleaded. 1.5% accuracy Full Scale. 304SS case liquidglycerine filled bronze tube & connection.

RANGE PART NUMBER LIST PRICE0-100 PSI 2-PG25-100G $21.000-200 PSI 2-PG25-200G $21.000-300 PSI 2-PG25-300G $21.000-400 PSI 2-PG25-400G $21.00

PRESSURE GAUGES Discount Code B

C/CA C/CA

SOLENOID CONTROL VALVE - Remote actuation for valveposition. Specify N.O. (normally open C802); N.C. (normallyclosed C801).


11/4" $1,772 11/2" $1,772 $ 1,911 $ 2,1342" $1,803 $ 2,185 $ 2,26521/2" $2,153 $ 2,165 $ 2,270 $ 2,4253" $2,172 $ 2,201 $ 2,312 $ 2,5094" $ 2,319 $ 2,997 $ 3,1896" $ 3,294 $ 4,235 $ 4,5448" $ 5,054 $ 6,799 $ 7,37310" $ 7,197 $ 9,499 $ 10,33312" $12,003 $15,334 $ 15,96114" POA POA POA16" POA POA POA18" POA POA POA20" POA POA POA


C/CA C/CA


$2,236 $2,334 $ 2,468 $ 2,690 $2,356 $ 2,742 $ 2,821 $2,601 $ 2,722 $ 2,827 $ 2,982 $ 2,758 $ 2,870 $ 3,066 $ 3,076 $ 3,531 $ 3,738 $ 3,851 $ 4,793 $ 5,102 $ 5,610 $ 7,356 $ 7,930 $ 7,753 $10,056 $10,889 $12,560 $15,891 $16,518 POA POA POA POA POA POA POA POA POA POA POA POA 6

NON-MODULATING PILOT OPERATED FLOAT VALVE -For level control of storage tanks, reservoirs, or basins.


C705/CF705 Discount Code B

11/4" 11/2" 2"21/2" 3" 4" 6" 8" 10" 12"14" 16" 18"20"

C/CA C/CA

* Reduced cavitation configuration. * Reduced cavitation configuration.



CO

NTRO

L VA

LVES 8

00.8

33.2

040

C000 MINI

HYDRAULIC CONTROL VALVE - Water or Air operated.Temp Max: 180° F (80° C) Pressure Max: 400 PSI (27.5 bar) SIZE PART NO. WGT (Lbs) LIST PRICE 3/8" C000AAA 2 $ 194.00 1/2 " C000AA 2 $ 220.00 3/4 " C000AA 3 $ 234.00 1" C000A 5 $ 240.00 11/4" C000B 5 $ 259.00

NEW!

25www.flomatic.com High Quality Valves Built to Last...

CO

NTRO

L VA

LVES

800.8

33.2

040

FLO-TROL®

Flomatic®

Flow Control Valves

MODEL CD900Constant Flow Control Valve

• Constant Flow Rates • Booster Pump Systems• Domestic Water Systems• Sizes 3/8” thru 3” (0.2 - 120 GPM*)• NSF/ANSI 61 and 372 Certified• Stainless Steel Construction

Flo-Trol® automatic flow control valvesare designed to give constant flow overa wide pressure range. Flow rates are main-tained to within ±15% between 15and 125 PSI (1 to 8.6 bar). The flow ratevaries due to manufacturing tolerances andwater temperatures. Valve bodies arestainless steel (not chrome or nickel-plated

brass) with a Buna-N orifice (NSF/ANSI61 certified).

*Consult factory for other sizes

Temp Max: 180˚F Pressure Max: 200 PSI

NEW!

Discount Code A

!"#$%&'( )%*+,-.!"#$%&'()*%+&),

/"0"123-(%-!%1+4-)3%##-5+6+3+'$+

!"#-.+#"/))0#12")34)425(+'6&'#7 !"#$%&'()9'5&

343:;< 7)89: ;%*+1-)!)89:-<=>?-@-<=>?-89:-7A; BC98:D----343:;= 7)89B ;%*+1-)!)89B-<=>?-@-<=>?-89B-7A; BC98:D----343>;< 7)E9: ;%*+1-)!)E9:-<=>?-@-<=>?-E9:-7A; BC98:D----343>;= 7)E9B ;%*+1-)!)E9B-<=>?-@-<=>?-E9B-7A; BC98:D----343?;< 7)<9: ;%*+1-)!)<9:-<=>?-@-<=>?-<9:-7A; BC98:D----343?;= 7)<9B ;%*+1-)!)<9B-<=>?-@-<=>?-<9B-7A; BC98:D----343@;< 7)>9: ;%*+1-)!)>9:-<=>?-@-<=>?->9:-7A; BC98:D----343@;= 7)>9B ;%*+1-)!)>9B-<=>?-@-<=>?->9B-7A; BC98:D----343=;< 7)B9: ;%*+1-)!)B9:-<=>?-@-<=>?-B9:-7A; BC98:D----343A;< 7)F9: ;%*+1-)!)F9:-<=>?-@-<=>?-F9:-7A; BC98:D----343B;< 7)G9: ;%*+1-)!)G9:-<=>?-@-<=>?-G9:-7A; BC98:D----343C;< 7)H9: ;%*+1-)!)H9:-<=>?-@-<=>?-H9:-7A; BC98:D----343:<;< 7)8: ;%*+1-)!)8:9:-<=>?-@-<=>?-8:-7A; BC98:D----343::;= 7)889B ;%*+1-)!)889B-<=>?-@-<=>?-889B-7A; CE9:CD----34D:;< 7@89: ;%*+1-)!@89:-8?-@-8?-89:-7A; FG98>D----34D:;= 7@89B ;%*+1-)!@89B-8?-@-8?-89B-7A; FG98>D----34D>;< 7@E9: ;%*+1-)!@E9:-8?-@-8?-E9:-7A; FG98>D----34D>;= 7@E9B ;%*+1-)!@E9B-8?-@-8?-E9B-7A; FG98>D----34D?;< 7@<9: ;%*+1-)!@<9:-8?-@-8?-<9:-7A; FG98>D----34D?;= 7@<9B ;%*+1-)!@<9B-8?-@-8?-<9B-7A; FG98>D----34D@;< 7@>9: ;%*+1-)!@>9:-8?-@-8?->9:-7A; FG98>D----34D@;= 7@>9B ;%*+1-)!@>9B-8?-@-8?->9B-7A; FG98>D----34D=;< 7@B9: ;%*+1-)!@B9:-8?-@-8?-B9:-7A; FG98>D----34DA;< 7@F9: ;%*+1-)!@F9:-8?-@-8?-F9:-7A; FG98>D----34DE;< 7@C9: ;%*+1-)!@C9:-8?-@-8?-C9:-7A; FG98>D----34DB;< 7@G9: ;%*+1-)!@G9:-8?-@-8?-G9:-7A; FG98>D----34DC;< 7@H9: ;%*+1-)!@H9:-8?-@-8?-H9:-7A; CE9:CD----34D:< 7@8: ;%*+1-)!@8:9:-8?-@-8?-8:9:-7A; CE9:CD----34D:> 7@8E ;%*+1-)!@8E9:-8?-@-8?-8E9:-7A; CE9:CD----34D:= 7@8B ;%*+1-)!@8B9:-8?-@-8?-8B9:-7A; CE9:CD----34D:E 7@8C ;%*+1-)!@8C9:-8?-@-8?-8C9:-7A; CE9:CD----34D>< 7@E: ;%*+1-)!@E:9:-8?-@-8?-E:9:-7A; CE9:CD----

IJKL,-M!JNL4O-"#-2-3+P"#(+3+*-(32*+023Q-%6-/"+R+S-T'$9-%6-?%UR%3%S-;2##2$V&#+((#

:F)0

#12")34D

?G@F)0

#12")343

26

CO

NTRO

L VA

LVES 8

00.8

33.2

040

PRP- 3/8" Pressure Reducing Pilot in UnleadedBronze or 316 Stainless Steel* – Enables automaticcontrol valves to reduce inlet pressure to a preset outlet pressureand maintain it irregardless to what fluctuations in flow occur.Temp Max: 180°F (80C) Pressure Max: 400 PSI

* For stainless steel, put “S” before letter and after part number.

BPP - Back Pressure Reducing Pilot in StainlessSteel - Enables automatic control valves to sustain a presetinlet pressure. Also enables control valve to relieve pressureupon reaching a preset inlet pressure.Temp Max: 180°F (80C) Pressure Max: 400 PSI

BPP Discount Code B

MINI BALL VALVE Discount Code B

Mini Ball Valve

SOLENOID VALVE-For on off control used to alternatelyapply pressure to and exhaust pressure from the main valvebody cover. Valves are specified either valve body cover. Valvesare 3 way 120V and are specified either normally open or closed.

SIZE PART NO. DESCRIPTION LIST PRICE1/4" 8853 Open $ 290.001/4" 8862 Closed $ 290.00

* Other types available.

SOLENOID VALVE Discount Code B

CV80S6 CHECK VALVE- All 316SS body with Delrin poppetand Buna-N seal. Threaded female x female connection.Temp Max: 180° F (82 C) Pressure Max: 400 PSI SIZE PART NO. WGT LIST PRICE3/8" 5159 .43 $ 110.001/2 " 4029 .59 $ 145.00

CV80S6 Discount Code BPRP Discount Code B

MiMiMiMiMMMMMiMininnininnnnnni BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBalalalalalalallalalalalalalallllalallaaaalaaalllalaaaaalaalalaaaaaaaaallaalalaaaaaaaaaaaaalalalalaaaaaaaaaaallllaaaaaaaaalllllalalalalaalllllallllallllllllllalllllllallllll lllllllllllllll VaVaVaVaaaVaValvlvllvlvlvlvvvvllvlllvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvlvvvvvllvlvvllvvvvve

150#150#

3/8" 149B5369 $ 11.00PART NO.

MINI BALL VALVE- Mini ball valves are a quater turn fullported on off isolation valves used on external control valvepilot controls.

152100A152100B152100C152100D

5-80 PSI25-125 PSI2-35 PSI

30-300 PSI

$250.00$250.00$250.00$250.00

PART NO. SPRING RANGE LIST PRICE $390.00$390.00$390.00$390.00

LIST PRICESTAINLESS

PART NO. SPRING RANGE LIST PRICE160100SA160100SB160100SC160100SD

5-80 PSI25-125 PSI2-35 PSI

30-300 PSI

$450.00$450.00$450.00$450.00

ACP - Accelerator Pilot in Unleaded Bronze - It isused in systems to control flow by applying an independentpressure to the diaphragm. Enables automatic control valvesto rapidly vent water from control diaphragm, thus allowingquicker main valve opening.

Temp Max: Pressure Max: 300 PSI

ACPMODEL 165 Discount Code B

1/2 " $750.00

SIZE PART NO. LIST PRICE165200

180°F (80C)

FC4 Discount Code B

FC -20FCFCFFCFFFFCFCFCFCFFFCFFCCFCFFFFFFFFCFFFFFFFFFFFFFFFFC ---222222020022002200002222200200220020020002000022020220222022222000002202220202220222202020002000020222020002000022222220000000

FLOW CONTROL- Adjustable restrictor that has free flow inthe direction of the arrow on the body and operates as a needle valve in the reverse direction.

3/8" FC4 $ 195.00SIZE PART NO. LIST PRICE

TEST COCKS Discount Code B

TEST COCKS- Unleaded Bronze test cocks, full port standard. SIZE PART NO. WGT. CASE QTY. LIST PRICE 1/4"x1/4" 9383397E .05 4 $10.501/8"x1/4" 9383395E .05 4 $10.50

Y STRAINER- Unleaded Bronze body, 20 mesh stainlesssteel strainer. Furnished with clean out plug.ction as M

SIZE PART NO. LIST PRICE3/8" Inlet x 1/4" Outlet 8710E $ 25.00

See page 21 for other sizes.

Y STRAINER Discount Code B


27

CO

NTRO

L VA

LVE

800.8

33.2

040

0

20

40

60

80

100

120

140

160

180

200

220

240

260

280

300

0 25 50 100 125 150

Inle

t Pre

ssur

e (p

si) U

p St

ream

75Outlet Pressure (psi) Down Stream

Outlet Pressure (PSIG)

Minimum Outlet Pressure (PSIG)

Recommended Outlet PressureOperating ZONEFor Automatic Pressure Regulating Valves (ACV)

Cavitation Chart (Inlet Pressure vs. Outlet Pressure)

NOTE: CAVITATION ZONENot recommended Outlet Pressure

Consult Factory

RuRulRuleRule Rule oRule ofRule of Rule of TRule of ThRule of ThuRule of ThumRule of ThumbRule of Thumb:Rule of Thumb: Rule of Thumb: I

Rule of Thumb: In

Rule of Thumb: Inl

Rule of Thumb: Inle

Rule of Thumb: Inlet

Rule of Thumb: Inlet

Rule of Thumb: Inlet V

Rule of Thumb: Inlet Vs

Rule of Thumb: Inlet Vs.

Rule of Thumb: Inlet Vs.

Rule of Thumb: Inlet Vs. O

Rule of Thumb: Inlet Vs. Ou

Rule of Thumb: Inlet Vs. Out

Rule of Thumb: Inlet Vs. Outl

Rule of Thumb: Inlet Vs. Outle

Rule of Thumb: Inlet Vs. Outlet

Rule of Thumb: Inlet Vs. Outlet

Rule of Thumb: Inlet Vs. Outlet =

Rule of Thumb: Inlet Vs. Outlet =

Rule of Thumb: Inlet Vs. Outlet = M

Rule of Thumb: Inlet Vs. Outlet = Ma

Rule of Thumb: Inlet Vs. Outlet = Max

Rule of Thumb: Inlet Vs. Outlet = Max

Rule of Thumb: Inlet Vs. Outlet = Max 3

Rule of Thumb: Inlet Vs. Outlet = Max 3:

Rule of Thumb: Inlet Vs. Outlet = Max 3: 1

Rule of Thumb: Inlet Vs. Outlet = Max 3: 1

OK ZONE

SIZING GUIDE for PILOT OPERATED VALVESIn order to insure pressure control and avoid excessive noise and maintenance expense, extreme care must be taken when sizing the throttling valve for a specific application. Although both pressure conditions and flow(velocity) are contributing factors, field experience has determined that flow rate is the most critical factor andthat proper valve sizing can be attained through consideration of the flow rate alone.

The maximum flow rates in tables below for Model C (full ported valves) are based on a velocity of 15 feet persecond, feet/second or (4.6 meter per second). The throttling valve is capable of handling larger flows for short-er periods of time; however, the increase in maximum flow should be limited to 25% of the above values.Minimum flow rates are based on 0.5 feet/second flow rate (0.15 meter per second). Valve should be selected tobe opened between 20-30% for best efficiencies and service life. The flow values for Model CF (Reduce portedvalves) in the table below are less as they have smaller valve orifice or seat areas.

The tables below indicate the desired throttling valve size (inches) for designated maximum and minimum flowrates in gallons per minute (GPM):

Valve BodyType (Inch) Flow 11⁄2” 2” 21⁄2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 30” 36”

Model CFull Ported

Min

Max

2.5

90

4

150

7

230

11

340

20

600

40

1,300

80

2,400

120

3,700

180

5,200

240

7,200

300

8,500

400

12,000

500

14,000

700

21,000

1000

32,000

–

–

Model CFReducedPorted

Min

Max

_

_

_

_

_

_

7

230

11

340

20

600

40

1,300

80

2,400

120

3,700

180

5,200

240

7,200

300

9,500

400

12,000

500

14,000

700

21,000

1000

32,000

Model CIDiaphragm

Min

Max

–

–

2

110

2

132

2

132

6

264

8

1020

25

1180

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–


28

C150EHF Discount Code A


11/4" C150002EHF 5.2 $800.00

End-ConnectionsModel

C150E Unleaded Valve Body Female NPT/Union Female NPT/Male NPT

(No union nut)Female NPT/Male NPT

(No union nut)

Single Union Endw/Female NPT

Unleaded Valve BodyC150ET

Description Inlet Outlet

Product Specifications• Connection: NPT (Male/Female),or Sweat (see product option chart below) • Max Pressure: 400 PSI (27 bar) • Max Temperature: 1800F (800C) • Pressure Regulating Setting: Factory set at 50 psi • Standard Spring Adjustment range see part number chart

PRESSURE REDUCING VALVE (PRV)- ModelC150E when properly installed will regulate highupstream (inlet pressure) to a lower regulated down-stream (outlet pressure) constant pressure within a rangeregardless ofwater flow. This is accomplished by anadjustable spring loaded balancing valve factory set toautomatically regulate the downstream pressure.NSF/ANSI 61 Certified by IAPMO R&T, 1⁄2” through 11⁄4”ASSE® Listed 1003, IAPMO® listedCertified for City of Los Angeles

Temp Max: 180°F (80C) Pressure Max: 400 PSIFactory set at 50 PSI

Part numbers are for 15 - 75 PSI range

PRESSU

RE R

ED

UCIN

G 8

00.8

33.2

040


11/4" C150102EHF 5.2 $800.00

See 11/2" & 2" sizes C150E.



1/2 " C150099E 2.2 $ 188.00 3/4" C150000E 2.2 $ 194.00 1" C150001E 3.5 $ 219.00 11/4"* C150002E* 5.2 $ 414.00 11/2" C150003E 15 $ 940.00 2" C150004E 15 $1,010.00



1/2 " C150199E 2.2 $ 188.00 3/4" C150100E 2.2 $ 194.00 1" C150101E 3.5 $ 219.00 11/4"* C150102E* 5.2 $ 414.00 11/2" C150103E 15 $ 940.00 2" C150104E 15 $1,010.00



1/2 " C150099ET 2.2 $144.00 3/4" C150000ET 2.2 $150.00 1" C150001ET 3.5 $194.00



1/2 " C150199ET 2.2 $144.00 3/4" C150100ET 2.2 $150.00 1" C150101ET 3.5 $194.00


PRESSURE REDUCING VALVE (PRV)- ModelC150EHF when properly installed will regulate highupstream (inlet pressure) to a lower regulated down-stream (outlet pressure) constant pressure within a rangeregardless ofwater flow. This is accomplished by anadjustable spring loaded balancing valve factory set toautomatically regulate the downstream pressure.

High flow in to 70 GPM

NSF/ANSI 61 Certified by IAPMO R&T.ASSE® Listed 1003, IAPMO® listedCertified for City of Los Angeles


PRESSURE REDUCING VALVE (PRV)- ModelC150ET when properly installed will regulate highupstream (inlet pressure) to a lower regulated down-stream (outlet pressure) constant pressure within a rangeregardless ofwater flow. This is accomplished by anadjustable spring loaded balancing valve factory set toautomatically regulate the downstream pressure.NSF/ANSI 61 Certified by IAPMO R&T.ASSE® Listed 1003, IAPMO® listedCertified for City of Los Angeles


*Note: 11/4" size is one size smaller restricted flow. Maximum 25GPM, see model C150EHF for higher capacity.

C150E Discount Code A C150ET Discount Code A


SIZE PART NO. SPRING RANGE LIST PRICE

CONSTANT PRESSURE PUMP CONTROL

$177.65 $177.92 $209.63 $389.56

DIRECT ACTING CONSTANT PRESSURE PUMP CON-TROL VALVE WITH TAPPINGS- Reduces rapid pump cyclingand maintains a pre-set operating pressure for wells. Threadedfemale x female union ends or female I.D. x male O.D. on inlet andoutlet connections. Features a unleaded alloy body & composite bellhousing, Nylon reinforced Buna-N diaphragm. Supplied with twoFNPT tailpiece and union nuts. With two (2) 1⁄4” tappings for gageand pressure switch. One (1) 3⁄4” tapping for water tank.

Temp Max: 180°F (80C) Pressure Max 400 PSIFactory set at 50 PSI

1" CB152001E 15 - 75 PSI $ 356.00 1" CB152101E 15 - 150 PSI $ 356.00

$209.6 C152003E $389.5$6

$209.6 $389.56

$177.65 $177.92 $209.63 $389.56

C152001ET

C152101ET

29

CYCLE GARD® IC152E Discount Code A

CYCLE GARD®HY-FLOWC152EHF Discount Code A

CYCLE GARD® IC152ET Discount Code A

CYCLE GARD® IICN101 Discount Code A

CONSTANT PRESSURE PUMP CONTROL- Reduces rapidpump cycle with field adjustable by-pass and maintains a pre-set operating downstream pressure. Flow 1-5200 GPM depending onsize. For use with domestic water well, municipal water systems,industrial water system, irrigation and agriculture.


SIZE PART NO. LIST PRICE PART NO. LIST PRICETHREADED FLANGED 150#

CYCLE GARD® IVCB152E Discount Code A

HIGH FLOW DIRECT ACTING CONSTANT PRESSUREPUMP CONTROL VALVE- Model C152EHF reduces rapid pumpcycle with field adjustable by-pass and maintains a pre-set operatingdownstream pressure for wells. Threaded female x female NPT con-nection with hex end OD. Features a low lead alloy body and cover.Nylon reinforced Buna-N diaphragm. Ideal for flows up to 70 GPM.


1” NPT ID x 11/4" NPT OD-Dual purpose

11/4" CN1010B $ 2,156 11/2" CN1010C $ 2,196 CN1011C 2" CN1010D $ 2,213 CN1011D

21/2" CN1010E $ 2,757 CN1011E 3" CN1010F $ 2,800 CN1011F 4" CN1011G 6" CN1011J 8" CN1011K

SIZE PART NO. SPRING RANGE

SIZE PART NO. SPRING RANGE


1 1/4" C152002EHF 15 - 75 PSI $950.00 1 1/4" C152102EHF 15 - 150 PSI $950.00

Also available 11/2" & 2" sizes.

1"F & 11/4"M CB152001ET 15 - 75 PSI $ 356.001"F & 11/4"M CB152101ET 15 - 150 PSI $ 356.00

15 - 75 PSI15 - 75 PSI15 - 75 PSI15 - 75 PSI15 - 75 PSI

15 - 75 PSI

15 - 150 PSI15 - 150 PSI15 - 150 PSI15 - 150 PSI15 - 150 PSI

15 - 150 PSI

*Note: 11/4” size is one size smaller restricted flow, maximum 25GPM. See model C152EHF below for higher capacity.



LIST PRICE

LIST PRICE

LIST PRICE

$319.00

LIST PRICE$319.00

$ 289.00 $ 344.00 $ 606.00 $ 1,010.00 $ 1,155.00

1"F & 11/4" M

1"F & 11/4" M

C152000EC152001EC152002EC152003EC152004E

C152100EC152101EC152102EC152103EC152104E

SIZE

SIZE

PART NO.

PART NO.

SPRING RANGE

SPRING RANGE

$ 1,650$ 1,870$ 2,195$ 2,200$ 3,020$ 4,730$ 8,010

CO

NSTA

NT P

RESSU

RE P

UM

P C

ON

TRO

L800.8

33.2

040

3/4"1"1 1/4"*11/2"2"

3/4"1"1 1/4"*11/2"2"

• Slotted seat

• No drilled holes

• Self-cleaning

• No screen

SCREEN DRILLEDHOLE

FOR PRESSURE REDUCING VALVES SEE PG. 22 & 28!

NOTE: NPT VALVES RATED TO 400 PSI

DIRECT ACTING CONSTANT PRESSURE PUMP CONTROL VALVE- Reduces rapid pump cycling and maintains apre-set operating pressure for wells. Threaded female x female connection. Features a low lead alloy body & composite bell housing, Nylon reinforced Buna-N diaphragm. Supplied with twoFNPT tailpiece and union nuts.


DIRECT ACTING CONSTANT PRESSURE PUMP CONTROL VALVE- Dual purpose threads, reduces rapid pumpcycling and maintains a pre-set operating pressure for wells. 1"threaded female I.D. x 11/4" male O.D. on inlet and outlet connections. Features a low lead alloy body & composite bell housing, Nylon reinforced Buna-N diaphragm.


$ 289.00 $ 344.00 $ 606.00 $ 1,010.00 $ 1,155.00

CONSTANT PRESSURE PUMP CONTROL VALVE -Reduces rapid pump cycle with field adjustable by-pass and main-tains a pre-set operating downstream pressure. Ideal for irriga-tion, water wells and agriculture applications.

Max. pressure differential between inlet and outlet pressure 125PSI. Consult factory for higher pressure differential.

30

CYCLE GARD® CICIN101 Discount Code A

CONSTANT PRESSURE PUMP CONTROL VALVE - Reducesrapid pump cycle and maintains a pre-set operating downstreampressure.Ideal for irrigation, water wells and agriculture. Built inby-pass at 5 GPM.

CYCLE GARD® CI2

CIN101-2 Discount Code ACYCLE GARD® CNA CNA101 Discount Code A

FLANGED ANSI 150#CNA1010BCNA1010CCNA1010DCNA1010ECNA1010F

CNA1011CCNA1011DCNA1011ECNA1011FCNA1011GCNA1011JCNA1011K

$ 2,156$ 2,196$ 2,213$ 2,757$ 2,800

NOTE: NPT VALVES RATED TO 400 PSI




LIST PRICELIST PRICE

11/2"2"

11/2"2"

CIN1020CCIN1020D

CIN1020C2CIN1020D2

SIZESIZEPART#

THREADED FEMALEPART#

THREADED FEMALE$ 950.00$ 1,100.00

$ 850.00$ 895.00

CONSTANT PRESSURE PUMP CONTROL VALVE-Reduces rapid pump cycle with field adjustable by-pass andmaintains a pre-set operating downstream pressure for wells.CONSULT FACTORY or control valve price list for specific options.

SIZEPART #

LIST PRICELIST PRICEPART #

11/4"11/2"2"21/2"3"4"6"8"

$ 1,650$ 1,870$ 2,195$ 2,200$ 3,020$ 4,730$ 8,010

THREADED FEMALE

CO

NSTA

NT P

RESSU

RE P

UM

P C

ON

TRO

L 800.8

33.2

040

CONSTANT PRESSURE PUMP CONTROL

Max. pressure differential between inlet and outlet pressure 125PSI. Consult factory for higher pressure differential.

CYCLE GARD®

C153S6 Discount Code A

Constant Pressure Pump Control Valve- Reduces rapidpump cycling and maintains a preset system operating pressureindependent from low or high flow conditions. Valve body is all316 stainless steel female NPT connection. Supports a hangingload up to 3,400 lbs. and fits in 4” well casing. 1” NPT Femaleconnection x 11/4" male NPT, flow rates for 1-20 GPM, 11/4" 2-50GPM.Temp Max: 180°F Pressure Max: 400 PSI

Factory set at 50 PSI

Note: Factory set at 50 PSI standard part number below, for 40PSI add “A”, 60 PSI add “B” and for new 70 PSI add “C” to endof part number.

SIZE PART # WGT. LIST PRICE1”F x 11/4"M* C153002S6 3 $285.0011/4"F C153003S6 4.3 $430.0011/4"F** C153003S6-3** 4.3 $430.00

*Dual purpose threads**3 GPM bypass recommended for 3 HP and 5 HP pump


BENEFITS AND FEATURES

• Maintains a Constant Pressure

• Stops Pump from Cycling

• Hydraulically Operated (no electricity required)

• Extends the Life of the Pump

• Eliminates Effects of Water Hammer

• Many Models Available for Various Applications

• Easy to Install

• Field Adjustable

• Downsize the Tank

• Provides More Efficient Use of Appliances

• 3-Year Warranty

31

MINIAIR®- Cast iron fusion bonded epoxy coated body-stainlesssteel trim. Threaded female x female connections. Stainless seatwith Viton o-ring. Small orifice. Consult bulletin # 280 for details.Vents under line pressure.Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI

INLET OUTLET PART NO. WGT. LIST PRICE

3/8" 3/8" 6500 7 $ 206.00 1/2" 3/8" 6501 7 $ 230.00 3/4" 3/8" 6502 7 $ 255.00 1" 1/2" 6503 7 $ 284.00 2" 1/2" 6504 45 $ 762.00

CONSULT FACTORY for full line of sizes available.

MAXIAIR®- Cast iron body-stainless steel trim. Threadedfemale x female connections. NITRILE (Buna-N) seat. Largeorifice– equals inlet size. Vents on filling- eliminates vacuumunder pressure loss.Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI


1/2 " 1/2" 6520 8 $ 364.00 1" 1" 6521 16 $ 487.00 2" 2" 6522 44 $ 795.00 3" 3" 6523 75 $ 1,186.00 4" 4" 6524 154 $ 2,058.00 6" 6" 6525 174 $ 2,868.00


MAXIAIR® Discount Code B

WELLAIR®- Similar to Maxiair® but features discharge throttling valve. Ideal for deep well applications.

Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI


1/2 " 1/2 " 6560 8 $ 628.00 1" 1" 6561 18 $ 770.00 2" 2" 6562 50 $ 1,103.00 3" 3" 6563 109 $ 1,829.00


WELLAIR® Discount Code B COMBOAIR®- Cast iron body-stainless steel trim. Combinesfeatures of Miniair® and Maxiair® in one housing. Small orifice is3/32” in the 1” valve, 3/16” in the 2” and 3” sizes.

Temp Max: 150°F (65C)Inlet Pressure Max: 1”– 150 PSI, 2”-3” – 250 PSI


1" 1" 6540 27 $ 546.00 2" 2" 6541 72 $ 966.00 3" 3" 6542 114 $ 2,306.00 4" 4" 6543 177 $ 2,894.00


COMBOAIR® Discount Code B

MINIAIR® Discount Code B

AIR

RELE

ASE

800.8

33.2

040

6BSE BUG SCREEN - Picture shown with valve not included.Unleaded bronze body with threaded female connection. Stainlesssteel strainer with unleaded bronze. Stainless steel or plastic caps,with nipple for installation into air valve vent. SIZE PART NO. WGT. LIST PRICE

1/2" 4399E-1 0.2 $ 21.00 1" 4301E-1 1.2 $ 24.00 2" 4304E-1 2.8 $ 64.00 3" 4306E-1 7.7 $ 142.00

6BSE BUG SCREEN Discount Code B

All Air Release, Air & Vacuum and UniversalCombination Valves meet or exceed ANSI/AWWA

C512 standards.

Valves are painted with TNEMEC red. Consult factory for fusion bonded epoxy coated option.


32

SEWAIR-MINI®- Cast iron body, 303 stainless steel trim.Threaded female x female connections. NITRILE (Buna-N) seat.1/4” orifice-for waste water application. Vents under line pres-sure.Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSI INLET OUTLET PART NO. WGT. LIST PRICE

2" 1/2" 6600 50 $ 696.00 3" 1/2" 6601 70 $ 1,077.00


For unit with backflush attachment, add “BF” to end of part number andadd list price. See Backflush on this page.

For 316SS trim, add ST to the end of the part # and 20% to the list price.

SEWAIR-MAXI®- Cast iron body, 303 stainless steel trim.Threaded female x female connections. NITRILE (Buna-N) seat.Large orifice–equals inlet size vents on filling. Eliminates vacuumin waste water pipeline under pressure loss.Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSI INLET OUTLET PART NO. WGT. LIST PRICE

2" 1" 6620 50 $ 963.00 2" 2" 6621 82 $ 1,820.00 3" 3" 6622 85 $ 2,101.00 4" 4" 6623 120 $ 2,942.00 6" 6" 6624 210 $ 5,436.00



SEWAIR-DUAL®- Cast iron body, 303 stainless steel trim.NITRILE (Buna-N) seat. Provides protection of both small andlarge orifices. Two body construction.Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSI INLET OUTLET PART NO. WGT. LIST PRICE

2" 1" 6640 120 $ 3,089.00 2" 2" 6641 150 $ 3,522.00



SEWAIR-DUAL® Discount Code B

SEWAIR-COMBO®- Cast iron body, 303 stainless steel trim.NITRILE (Buna-N) seat. Provides same protection as Sewair-Dual®,but combines into one body.Temp Max: 150°F (65C) Pressure Max: 175 PSI INLET OUTLET PART NO. WGT. LIST PRICE

2" 1" 6650 80 $ 1,767.00 2" 2" 6651 110 $ 2,649.00 3" 3" 6652 145 $ 3,800.00



SEWAIR-COMBO® Discount Code B

BACKFLUSH- Fabric reinforced NITRILE (Buna-N) hose withbronze shut off valves and galvanized quick disconnects. Designedfor pressure backflush Sewair models.

INLET PART NO. WGT. LIST PRICE 2" BF2 12 $ 458.00 3" BF3 19 $ 747.00


BACKFLUSH Discount Code B

FEATURES/FEATURES/BENEFITSBENEFITS

•Automatic•Improves Flow & Pump

Efficiency•Eliminates Restrictive

Air or Gas Pockets•Saves Energy

•Protects Against Vacuum•Long Body Protects Orifice

From Sewage

SEWAIR-MINI® Discount Code B SEWAIR-MAXI® Discount Code B

AIR

RELE

ASE 8

00.8

33.2

040

Valves are painted with TNEMEC red. Consulty factory for fusion bonded epoxy coated option.


33

BA

CK

FLO

W P

REV

EN

TERS

800.8

33.2

040

HOSE CONNECTION VACUUM BREAKERS-Designed to prevent back-siphonage or backflow of water, withvandal resistant features. Not for potable water.

Temp Max: 180°F (80C) Pressure Max: 125 PSIComplies with ASSE 1011

SIZE PART NO. WGT. LIST PRICE 3/4" GF800E .21 $ 17.00

UNLEADED DUAL CHECK VALVE- Brass body with singleunion.Temp Max: 180°F (80C) Pressure Max: 175 PSIComplies with ASSE 1024

SIZE PART NO. WGT. LIST PRICE 1/2" GF8089E 2 $ 69.00 3/4" GF8080E 2 $ 75.00 1" GF8081E 2 $ 85.00

Add “FC” to end of part number for copper sweat connection.Note: Consult factory for additional connection configurations.

DUAL CHECK with ATMOSPHERIC VENT Continuouspressure backflow preventer with an intermediate atmosphericvent, with double union ends. Complies with ASSE 1012, not forpotable water.Temp Max: 210°F (98C) Pressure Max: 175 PSI

SIZE PART NO. WGT. LIST PRICE 1/2" GF8289 1.3 $ 87.00 3/4" GF8280 1.3 $ 89.00*With copper sweat connectionsNote: Consult factory for additional connection configurations.

GFAVB Discount Code C GFHB8 Discount Code CGF8080E Discount Code C

GF8200 Discount Code C

ATMOSPHERIC VACUUM BREAKER- Designed to preventback-siphonage. Not for potable water.

Temp Max: 180°F (80C) Pressure Max: 125 PSIComplies with ASSE 1001

SIZE PART NO. WGT. LIST PRICE 1/2" GF3599 1 $ 50.00 3/4 " GF3500 2 $ 60.00 1” GF3501 2 $ 80.00

DUAL CHECK VALVE- 316 stainless steel body with singleunion.Temp Max: 180°F (80C) Pressure Max: 175 PSIComplies with ASSE 1024

SIZE PART NO. WGT. LIST PRICE 3/4" GF8080S6 1.4 $ 145.00 1" GF8081S6 1.4 $ 151.00 11/4"* GF8082S6 2.2 $ 226.00*not ASSE approved

GF8080S6 Discount Code C

Glen-Flo® Backflow Products. Glen-Flo® products provide uncompromising reliability,

protecting potable water lines from hazardous cross connections

FLOMATIC FREIGHT POLICYFLOMATIC FREIGHT POLICY

We offer fast delivery

• “A” & “C” Code items: $1,500.00 net prepaid• “B” Code items: FOB Factory Minimum net Order of $75.00


FLANGED- Resilient wedge gate valves which meet revision ofAWWA C509 standard with bronze stem. ANSI B16.1, class 125.Temp Max: 140°F (60C) Pressure Max: 250 PSI

Tapped & plugged

SIZE PART NO. WGT. LIST PRICE 21/2" 8461 51 $ 759.00 3" 8462 67 $ 880.00 4" 8463 88 $ 968.00 6" 8464 138 $ 1,375.00 8" 8465 214 $ 2,052.00 10" 8466 360 $ 3,025.00 12" 8467 531 $ 3,575.00

OUTSIDE SCREW & YOKE- Resilient wedge gate valveswhich meet revision of AWWA C509 standard with bronze stemand are UL/FM listed. ANSI B16.1, class 125.Temp Max: 140°F (60C) Pressure Max: 175 PSI

Tapped & plugged

SIZE PART NO. WGT. LIST PRICE 21/2" 84610SY 55 $ 1,320.00 3" 84620SY 74 $ 1,540.00 4" 84630SY 103 $ 1,870.00 6" 84640SY 158 $ 2,970.00 8" 84650SY 240 $ 4,180.00 10" 84660SY 392 $ 6,270.00

34

FLANGED- Resilient wedge gate valves which meet revision ofAWWA C515 standard, with stainless steel stem. ANSI B16.1, class 125.Temp Max: 140°F (60C) Pressure Max: 250 PSI

SIZE PART NO. WGT. LIST PRICE 21/2" 8561 38 $ 324.00 3" 8562 56 $ 390.00 4" 8563 78 $ 546.00 6" 8564 138 $ 913.00 8" 8565 214 $ 1,489.00 10" 8566 360 $ 2,076.00

12" 8567 531 $ 3,150.0014" 8568 547 $ 5,764.5016" 8569 719 $ 6,599.00

115FL Discount Code C

PUSH-ON- Resilient wedge gate valves which meet revision of AWWAC515 standard, with stainless steel stem. Ring-type (push-on PVC pipe).


SIZE PART NO. WGT. LIST PRICE 2" 8560RT 28 $ 285.00 21/2" 8561RT 42 $ 312.00 3" 8562RT 44 $ 391.00 4" 8563RT 69 $ 516.00 6" 8564RT 119 $ 963.00 8" 8565RT 203 $ 1,540.00 10" 8566RT 278 $ 2,418.00

12" 8567RT 421 $ 3,838.00

115PO Discount Code C

MECHANICAL JOINT- Resilient wedge gate valves which meetrevision of AWWA C515 standard, with stainless steel stem. ANSI B16.1, class 125, MJ flange.


SIZE PART NO. WGT. LIST PRICE 2" 8560MJ 28 $ 308.00 3" 8562MJ 44 $ 514.00 4" 8563MJ 69 $ 644.00 6" 8564MJ 119 $ 1,155.00 8" 8565MJ 203 $ 1,869.00 10" 8566MJ 278 $ 2,541.00

12" 8567MJ 421 $ 3,839.0016" 8569MJ 656 $ 5,225.00

115MJ Discount Code C

109OSY Discount Code C 109NRS Discount Code C

AWWA C515 Gate Valves

AWWA C509 Gate ValvesStandard 2” operating nut, for hand wheel on all C515 Gate Valves. Add “HW” to the end of the part number and add 15 % to list.

All gate valves standard open left. Consult factory for right hand opening.

THREADED- Resilient wedge valve which meet AWWA 515 stan-dard with SS stem with NPT connections.


SIZE PART NO. WGT. LIST PRICE 2" 8560NPT 20 $ 253.00 3" 8562NPT 32 $ 402.00 4" 8563NPT 47 $ 538.00 6" 8564NPT 85 $ 932.00

115NPT Discount Code C

FLOMATIC VALVES IS AN ACTIVE MEMBER INTHESE INDUSTRY ASSOCIATIONS AND OTHERS



GA

TE V

ALV

ES 8

00.8

33.2

040


35

FLOMATIC SALES REPSFLOMATIC SALES REPSSTATE DOMESTIC EMAIL INDUSTRIAL EMAIL MUNICIPAL EMAIL

WATER SYSTEMS Alabama H2O Reps [email protected] H2O Reps [email protected] H2O Reps [email protected] Pacific NW Sales [email protected] Pacific NW Sales [email protected] Pacific NW Sales [email protected] Desert Pacific Sales, LLC [email protected] Desert Pacific Sales, LLC [email protected] Desert Pacific Sales, LLC [email protected] DJC Sales [email protected] Flomatic [email protected] Flomatic [email protected] Desert Pacific Sales, LLC [email protected] Desert Pacific Sales, LLC [email protected] Desert Pacific Sales, LLC [email protected] Maples Sales & Service [email protected] Maples Sales & Service [email protected] Maples Sales & Service [email protected] Harmon & Co [email protected] Harmon & Co [email protected] Harmon & Co [email protected] Hasco Sales [email protected] Hasco Sales [email protected] Hasco Sales [email protected] Hasco Sales [email protected] Hasco Sales [email protected] Hasco Sales [email protected] Welty Inc [email protected] L.J. Ruffin [email protected] L.J. Ruffin [email protected] H2O Reps [email protected] H2O Reps [email protected] H2O Reps [email protected] Hawaii Engineering Services [email protected] Hawaii Engineering Services [email protected] Hawaii Engineering Services [email protected] Pacific NW Sales [email protected] Pacific NW Sales [email protected] Pacific NW Sales [email protected] - North Rep Rite Burk [email protected] Rep Rite Burk [email protected] Rep Rite Burk [email protected]

- South GeoStarr Marketing [email protected] GeoStarr Marketing [email protected] Flomatic [email protected] Watermark Engineered [email protected] Watermark Engineered [email protected] Watermark Engineered [email protected] GeoStarr Marketing [email protected] GeoStarr Marketing [email protected] Flomatic [email protected] GeoStarr Marketing [email protected] GeoStarr Marketing [email protected] Flomatic [email protected] Kentucky Watermark Engineered [email protected] Watermark Engineered [email protected] Watermark Engineered [email protected] DJC Sales [email protected] DJC Sales [email protected] TLP Solutions [email protected] Harmon & Co [email protected] Harmon & Co [email protected] Harmon & Co [email protected] Hasco Sales [email protected] Hasco Sales [email protected] Hasco Sales [email protected] Harmon & Co [email protected] Harmon & Co [email protected] Harmon & Co [email protected] Herder Sales [email protected] RS Controls [email protected] RS Controls [email protected] Rep Rite Burk [email protected] Rep Rite Burk [email protected] Rep Rite Burk [email protected] Flomatic [email protected] Flomatic [email protected] Flomatic [email protected] - West GeoStarr Marketing [email protected] GeoStarr Marketing [email protected] Flomatic [email protected]

- East Flomatic [email protected] Flomatic [email protected] Flomatic [email protected] Pacific NW Sales [email protected] Pacific NW Sales [email protected] Pacific NW Sales [email protected] GeoStarr Marketing [email protected] GeoStarr Marketing [email protected] Flomatic [email protected] Desert Pacific Sale LLC [email protected] Desert Pacific Sale LLC [email protected] Desert Pacific Sale LLC [email protected] Hampshire Harmon & Co [email protected] Harmon & Co [email protected] Harmon & Co [email protected] Jersey - North Advanced Hydronics [email protected] Advanced Hydronics [email protected] Advanced Hydronics [email protected]

- South Hasco Sales [email protected] Hasco Sales [email protected] Hasco Sales [email protected] Mexico Maples Sales & Service [email protected] Maples Sales & Service [email protected] Maples Sales & Service [email protected] York Group One [email protected] Group One [email protected] Group One [email protected] NYC & Long Island Advanced Hydronics [email protected] Advanced Hydronics [email protected] Advanced Hydronics [email protected]

North Carolina Lewis Marketing [email protected] Lewis Marketing [email protected] Lewis Marketing [email protected] Dakota Rep Rite Burk [email protected] Rep Rite Burk [email protected] Rep Rite Burk [email protected] - North WYNN Enterprises, LLC [email protected] WYNN Enterprises, LLC [email protected] Daman Superior [email protected]

- South WYNN Enterprises, LLC [email protected] WYNN Enterprises, LLC [email protected] WYNN Enterprises, LLC [email protected] DJC Sales [email protected] DJC Sales [email protected] TLP Solutions [email protected] Pacific NW Sales [email protected] Pacific NW Sales [email protected] Pacific NW Sales [email protected] - West WYNN Enterprises, LLC [email protected] WYNN Enterprises, LLC [email protected] WYNN Enterprises, LLC [email protected]

- East Hasco Sales [email protected] Hasco Sales [email protected] Hasco Sales [email protected] Island Harmon & Co [email protected] Harmon & Co [email protected] Harmon & Co [email protected] Carolina Lewis Marketing [email protected] Lewis Marketing [email protected] Lewis Marketing [email protected] Dakota Rep Rite Burk [email protected] Rep Rite Burk [email protected] Rep Rite Burk [email protected] H2O Reps [email protected] H2O Reps [email protected] H2O Reps [email protected] DJC Sales [email protected] DJC Sales [email protected] TLP Solutions [email protected] Flo-Tech [email protected] Flo-Tech [email protected] Flo-Tech [email protected] Harmon & Co [email protected] Harmon & Co [email protected] Harmon & Co [email protected] Hasco Sales [email protected] Hasco Sales [email protected] Hasco Sales [email protected] Pacific NW Sales [email protected] Pacific NW Sales [email protected] Pacific NW Sales [email protected] Virginia WYNN Enterprises [email protected] WYNN Enterprises [email protected] WYNN Enterprises [email protected] Rep Rite Burk [email protected] Rep Rite Burk [email protected] Rep Rite Burk [email protected] Maples Sales & Service [email protected] Maples Sales & Service [email protected] Maples Sales & Service [email protected]

CANADAAlberta Fluid Agency’s [email protected] Fluid Agency’s [email protected] Fluid Agency’s [email protected] Columbia Fluid Agency’s [email protected] Fluid Agency’s [email protected] Fluid Agency’s [email protected] Quadra Sales [email protected] Quadra Sales [email protected] Quadra Sales [email protected], NB, PE, NFLD Partington Sales [email protected] Partington Sales [email protected] Partington Sales [email protected] Nimatec [email protected] Nimatec [email protected] Nimatec [email protected] Saskatchewan Quadra Sales [email protected] Quadra Sales [email protected] Quadra Sales [email protected]

Latin America MA Trading [email protected] MA Trading [email protected] MA Trading [email protected]

FOR LISTING OF WORLDWIDE FLOMATIC SALES REP, VISIT OUR WEBPAGE: www.flomatic.com

Flomatic Conditions of SaleTERMS OF SALEPRICEPrices at date of shipment will apply. Prices are subject to change without notice.ACCEPTANCEOrders are accepted subject to approval of credit. Delivery is subject to strikes,accidents, or other causes beyond our control.ERRORS, SHORTAGES, ETC.All claims for errors, shortages, etc. must be made within 10 days of delivery.CANCELLATIONS OF ORDERSOrders for standard catalog products may be cancelled only if notice is receivedprior to the date of shipment.RETURNSMerchandise in new and saleable condition may be returned within one year afterpurchase on a freight prepaid basis for credit upon return authorization approvalnumber, subject to inspection and acceptance at our plant. A 25% restockingcharge and original freight allowance, if any, will be deducted from the credit.Special order products are nonreturnable, or at manufacturer’s option.MINIMUM NET ORDER TERMS FREIGHT$75.00 1% ten days, net 30 A&C Code $1,500 B Code F.O.B Factory WARRANTIESLIMITED ONE (1)-YEAR WARRANTY (Complete Product Line)Flomatic Corporation warrants that its products are free from defects in materialsand workmanship. Flomatic will replace any valve covered by this warranty that isfound to be defective within one year, unless otherwise stated below, from the timeof sale. This warranty will be void if the product has been modified in any way bythe purchaser, or is subjected to unreasonable use.LIMITED THREE (3)- YEAR WARRANTY (Automatic Control Valves)Flomatic Corporation warrants that its Automatic Control Valves are free fromdefects in materials and workmanship for the period of three (3) years after ship-ment. Flomatic will repair or replace any parts or components that are found to bedefective within three years from the time of its shipment. Components utilized byFlomatic but manufactured by others will be warranted only to the extent of theguarantee of that manufacturer. This warranty will be void if the valve or its con-trols have been modified without factory authorization or if it is subjected to unusu-al operating conditions or if it is used for an application other than which it isintended which were not described or specified at the time of purchase.

LIMITED FIVE (5)-YEAR WARRANTY (Enviro Check® and Enviro FootValves) Flomatic warrants that its ENVIRO-CHECK® AND FOOT VALVES, in all sizesup to 4”, are free from defects in materials and workmanship. Flomatic willreplace, upon return authorization approval number, any ENVIRO CHECK® OR ENVI-RO FOOT VALVE covered by this warranty that is found to be defective within fiveyears from the time of sale. This warranty will be void if the product has beenmodified in any way by the purchaser, or is subjected to unreasonable use.These limited warranties extend to the original purchase from Flomatic only; theydo not extend to any other purchaser or transferee.

EXCLUSION OF WARRANTIESFlomatic makes no warranties, expressed or implied, with respect to its valves,other than the expressed limited warranties described herein. The implied war-ranties of merchantability and fitness for a particular purpose are hereby dis-claimed by Flomatic . There are no warranties that extend beyond the descriptionon the face hereof.WARNING-NOT DESIGNED, INTENDED OR PERMITTED IN NUCLEARFACILITY APPLICATIONS. FLOMATIC VALVES ARE NOT DESIGNED OR ENGINEERED FOR USE IN ANY NUCLEAR FACILITY OR IN CONJUNCTION WITH ANY NUCLEAR FACILITY OR SUPPORT FACILITY.USE OF ANY OF FLOMATIC’S PRODUCTS IN ANY SUCH APPLICATIONIS A MISUSE OF THESE PRODUCTS AND VOIDS ALL WARRANTIESCONTAINED HEREIN, EXPRESSED AND IMPLIED, OF MERCHANTABILITYAND FITNESS FOR PARTICULAR PURPOSE.EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGESIn no event shall Flomatic be liable for incidental or consequential damages,including but without limitation, damages of personal injuries resulting from thenegligence of Flomatic, which may arise from the manufacture, sale, purchase and/or use of Flomatic valves. It being intended that purchaser’s exclusive remedy islimited to replacement of defective products. Some states do not allow the exclusionor limitation of incidental or consequential damages, or limitation on how long animplied warranty lasts, so that the above limitations may not apply to you. Contactyour distributor or Flomatic at address shown if you have any questions about thecoverage of this warranty or service under this warranty. This warranty gives youspecific legal rights, and you may have other rights which vary from state to state.

NOTE: Flomatic reserves the right the change and/or alter valve products without prior notice. Consult factory for valve specifications.

88 WAYS YOU CAN REACH US...WAYS YOU CAN REACH US...CO

ND

ITIO

NS O

F S

ALE

80

0.8

33.2

04

0

1. SALES & ORDER DESK 800-833-2040 Press 2 We love to help with new orders and inquiries.

2. TECH SUPPORT 800-833-2040 Press 4 Our engineers are on stand-by for application/product support.

3. MARKETING DEPT. 800-833-2040 Press 3 Use this line to reach the sales & marketing group.

4. FAX ORDERS 800-314-3155 The fastest and easiest way is to fax us orders and inquiries.

518-761-9798

5. PHONE 518-761-9797 If you are out of the country or can’t get through, try this line.

6. WEB SITE www.flomatic.com This page will help you get the latest information on Flomatic.

7. E-MAIL ORDERS [email protected] This is a quick and easy way to send us a message and communicate with us.

8. U.S. Mail 15 Pruyn’s Island Drive Put it in an envelope and lick a stamp, it’s that easy.

Glens Falls, NY 12801-4424

Follow us on:


Flomatic who we are

Flomatic can accept no responsibility for possible errors in catalogues, brochures and other printed material. Flomatic reserves the right to alter its products without notice. Thisalso applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies.

15 Pruyn’s Island DriveGlens Falls, N.Y. 12801-4424800-833-2040518-761-9797 • Fax 518-761-9798www.flomatic.com e-mail: [email protected]

Distribution By:

This book is covered under patent numbers 6,024,121/6,581,633/5,176,171/4, 971,093/7,128,088/D718,429and other patents.

© 2018 Flomatic Corporation YPRICE18 15M

ManufacturingPlant in Upstate

New York

Automatic Control ValvesBenefits & Features

Flomatic’s Automatic Control Valves areNSF/ANSI 61 approved!

AIS-CompliantMade in U.S.A.

High Quality Valves Built to Last ...


Documents

Danfoss Price List - American Backflow