Upload
others
View
24
Download
1
Embed Size (px)
Citation preview
Daphne Punch Oil AF-2A & 2C High Performance Metal Stamping Oil
Application
Recommended for stamping aluminium plates, press-forming the heat exchanger aluminium finsof air conditioners (for both automotive & domestic type) where oil existence is undesirable on the progressive work.
Characteristics
Technologically Advanced Lubricants from Japan
Lubricant Product Information
Products / Industrial /
Description
Daphne Punch Oil AF-2A & 2C are odourless and self-drying type of punching/stamping oil for aluminium plates. It is formulated with low-viscosity synthetic volatile oil and special oiliness agent to give excellent performance.
Packing
20L pail, 200L drum
1. Good Lubricity On Aluminium And Copper Material 2. Non Corrosive To Aluminium And Copper
3. Colourless And Odourless – helps to improve working environment.
4. Excellent Drying Performance – eliminate the degreasing process.
Typical Specifications
Technologically Advanced Lubricants from Japan
The information provided is to our best knowledge, true & accurate, subjected to change without notification due to continual product research and development. All recommendations or suggestions are without guarantee since the conditions of use are beyond our control. The manufacturers do not accept liability for any loss or damage, however arising, which results directly from the use of such information, nor do we offer any warranty of immunity against patent infringement.
TYPE OF
METHOD
Total Acid No. (mgKOH/g)
1(1A) 1(1A)
1.328 1.400
53 57
oViscosity, cST @ 40 C
o 3Density 15 C g/cm 0.7636 0.7652
oFlash Point, (PM) C
0.01>
L0.5Colour
Daphne Punch Oil AF-2A & 2C
AF-2A AF-2C
Copper Corrosion (Room Temp. x 24 Hrs)
ASTM D-1500
ASTM D-4052
ASTM D-445
ASTM D-93
ASTM D-974
L0.5
0.01>