Daikin Learning Institute - Hoffman & Hoffman, Inc | HVAC ...€¦ · Daikin Learning Institute ... Air & Water-Cooled Screw Chiller Maintenance, ... screw compressor chillers, rooftop

2015Daikin Learning InstituteTechnical Service Training Catalog

People and ideas you can trust.™

Daikin Applied has been approved as an Authorized Provider by the International Association for Continuing Education and Training (IACET)

Daikin Learning Institute i

Technical Service Training

Table of ContentsWelcome to Daikin Applied ........................................................................... 1Daikin Learning Institute ................................................................................ 1Daikin Learning Institute Safety Statement ................................................... 1Daikin Learning Institute Service Training Staff ............................................ 2Director, Daikin Learning Institute ................................................................. 2Daikin Learning Institute Director's Message ................................................ 2Training Administrator ................................................................................... 3Technical Service Writer ................................................................................ 3Technical Service Instructors ........................................................................ 4Technical Service Instructors (continued) ..................................................... 5Technical Service Instructor - Rooftops, SWP & Rebel ................................ 6Enrollment ..................................................................................................... 7CEU’s (Continuing Education Units) ............................................................. 7Registration ................................................................................................... 7Payment ........................................................................................................ 8Course Scheduling ........................................................................................ 8Cancellation Policy ........................................................................................ 8Hotel Information ........................................................................................... 8Transportation ............................................................................................... 9Factory Tours ................................................................................................. 9Dress Code ................................................................................................... 9Training Materials .......................................................................................... 9Visit Us Online ............................................................................................... 9Training Course Schedule ........................................................................... 10Commercial Scroll Compressor Chiller Maintenance & Operation Course 11Centrifugal Chiller Maintenance & Operation Course ................................. 12Centrifugal Chiller Service & Compressor Repair ....................................... 13Centrifugal Chiller Service & Compressor Repair (continued) .................... 14Air & Water-Cooled Screw Chiller Maintenance, Operation & Service ....... 15MagnitudeTM WMC Magnetic Bearing Chiller Maintenance & Operation .... 16MagnitudeTM WMC Magnetic Bearing Chiller Service & Repair .................. 17MagnitudeTM WME Magnetic Bearing Chiller Maintenance & Operation .... 18MagnitudeTM WME Magnetic Bearing Chiller Service & Repair .................. 19Rooftop Service ........................................................................................... 20Rebel™ Rooftop Service ............................................................................. 21Self-Contained Service ............................................................................... 22Water Source Heat Pump ........................................................................... 23Off-Campus Training in Your Area ............................................................... 24Off Campus Training Terms & Conditions ................................................... 25Warranty and Disclaimer ............................................................................. 25Service Training Registration Form ............................................................. 26

Daikin Learning Institute 1


Welcome to Daikin AppliedDaikin Applied delivers engineered, fl exible solutions for commercial, indus-trial and institutional HVAC requirements with reliable products, knowledge-able applications expertise and responsive support. As part of Daikin Indus-tries, a Fortune 1000 company, Daikin Applied is the largest air conditioning, heating, ventilating and refrigeration company in the world. We have earned a worldwide reputation for providing a full line of quality products and exper-tise to meet the demands of our customers.

Daikin Learning InstituteThe Daikin Learning Institute offers industry-leading training programs for heating, ventilating and air conditioning (HVAC) professionals, owner/operators, contractors, service technicians, building and systems engineers, designers, distributors, sales reps and internal employees. Once you have made the investment in effi cient, fl exible Daikin HVAC equipment, taking care of your investment should be a top priority. Daikin Learning Institute offers technical service training courses to learn fi rst hand, from the manu-facturer, what it takes to get the most out of your mechanical system.

Daikin Applied has been approved as an Authorized Provider by the International Association for Continuing Education and Training (IACET). IACET is known as the premier standard-setting organization for continuing education and training providers. Daikin Applied has completed an extensive application process, has undergone review and evaluation by IACET representatives, and has successfully demonstrated adherence to all IACET criteria and guidelines under the ANSI/IACET 1-2007 Standard. Daikin Applied will comply with IACET continuing education standards for those courses awarding Continuing Education Units (CEU’s).

Daikin Learning Institute Safety StatementThe goal of Daikin Learning Institute is to provide product specifi c training and information necessary to establish a high level of profi ciency in operat-ing and servicing Daikin products. While product specifi c safe work proce-dures are built into our training program, knowledge and formal training of an applicable safe working culture, competency, practices and procedures for working in the HVAC fi eld is the obligation of the employer and individual prior to attending Daikin Applied equipment training.

Daikin Applied has been approved as an Authorized Provider by the In-ternational Association for Continu-ing Education and Training (IACET), 1760 Old Meadow Road, Suite 500,

McLean, VA 22102; (703) 506-3275



Daikin Learning Institute Service Training Staff

Director, Daikin Learning Institute

Thomas E. Watson, P.E. Fellow ASHRAE

Director, Daikin Learning Institute

Tom is the Director of the Daikin Learning Institute, which includes both sales and service training. He has been employed in engineering, marketing, and quality assur-ance during his 43 years with the Staunton facility. During this time, he has worked on air-cooled and water-cooled products utilizing reciprocating, scroll, screw and cen-trifugal compressors. His most recent role was Chief Development Engineer working on advance centrifugal products. He is the holder of fi ve patents on compressor and chiller technology. Tom is a licensed professional engineer in the Commonwealth of Virginia.

Tom has been very active in ASHRAE and served as President in 2012-2013.

He has also:

Received the R.C. Schulze Distinguished Service Award for 2000 from AHRI

Received ASHRAE Standards Achivement Award - 2004

ASHRAE Fellow - 2008

Received ASHRAE Exceptional Service Award - 2010

Daikin Learning Institute Director's Message

The mission of the Daikin Learning Institute Service Training Group is to provide the highest quality training and information to owners, operators and person servicing Daikin Applied equipment and the systems in which they are utilized. This global training will enable reliable, effi cient, cost effective and environmentallhy sound installation, operation and maintenance.

All members of the Daikin Learning Institute look forward to the opportunity to provide training at our locations and off campus locations to better serves our customers’ needs.



Training Administrator

Linda CusterTraining AdministratorDaikin Learning Institute

Linda has over 22 years of service working in various capacities with McQuay and now Daikin Applied with 14 years in the service training department. To obtain the most effective training, she advises that you carefully match your student(s) with the appropriate courses by evaluating the course content and objectives with them. Class size is limited and is offered on a fi rst-registered, fi rst-attend basis.

Confi rmation of enrollment along with hotel and travel information will be sent to the student within fi ve working days after receipt of your paid application. Upon receipt of your confi rmation, check it carefully and contact Daikin Learning Institute immediately if you fi nd any discrepancies.

An application received without full tuition payment does not reserve a space. If a class is full, we will contact the enrollee for standby or to offer an alternate class date. Please verify your enrollment. If you do not receive an enrollment confi rmation letter two weeks prior to the start of class, contact Daikin Learning Institute, as we may not have received your application. You may contact Linda at [email protected].

Technical Service Writer

Kimberly LesterTraining Technical WriterDaikin Learning Institute

Kimberly is the technical service writer for Daikin Learning Institute. She has been with Daikin for over 8 years, and enjoys creating and improving learning materials of all kinds, including technical manuals, PowerPoint presentations, and most recently, interactive 3d models and videos.

As Daikin Learning Institute continues to strive for excellence and industry-leading training techniques, you can expect to see many exciting enhance-ments to our course materials and online resources.

Kimberly is eager to assist you in fi nding manuals, or correcting errors and omissions that you may come across as you review our literature items. You may contact Kimberly at [email protected].



Technical Service Instructors

Robert HollembeakTechnical Service Training InstructorDaikin Learning Institute

• Certifi ed Centrifugal, Rotary screw, Reciprocating, Scroll and Micro-Tech® chiller control instructor for Daikin Learning Institute

• 42 years experience in commercial and industrial HVACR in service, management, training, consulting and sales working for various manu-facturers, public schools and as an independent contractor.

• Unlimited licensed HVAC & R contractor in GA & NC• ACCA registered Refrigerant Transition & Recovery Proctor• Reviews and composes service literature and procedures• Participated in ASHRAE handbook review workshops• Develops training programs and presentations• Provides remote on-site customer training & global technical support• Experience includes commissioning, servicing, analyzing and

maintaining centrifugal, rotary screw, scroll and reciprocating chillers, air handling equipment, pumps, cooling towers, pneumatic and DDC controls systems

Steven SelgestadTechnical Service Training InstructorDaikin Learning Institute

• Recently joined Daikin Learning Institute after having the position of Western Regional Trainer for Daikin Applied and as such, has worked extensively training technicians in the fi eld and in classroom settings

• 37 years of HVAC experience as technician, service manager and trainer. 21 years with McQuay and now Daikin Applied as a remote factory service techni-cian and Regional Trainer

• Certifi ed instructor for Daikin Screw, Centrifugal, and WMC chillers• Associates Degree in HVAC and Bachelors of Science in Technology

from University of South Dakota, Springfi eld• Worked with Daikin Applied Technical Response Center to develop soft-

ware manuals for Daikin WMC product• Recently relocated to Staunton, Va from Phoenix, AZ



Technical Service Instructors (continued)

Charles (Christy) JonesTechnical Service Training InstructorDaikin Learning Institute

• Served as Southeast Regional Service Trainer prior to joining the Dai-kin Learning Institute as a technical service trainer

• 49 years experience in the HVAC industry with HVAC technician degree having worked for several major HVAC manufacturers providing factory service and repair on their product.

• 23 years with McQuay Factory Service & Daikin Applied in various capacities including service tech, Regional trainer, remote instructor. As a technician, Christy provided service and repair on all types of HVAC systems.

• Certifi ed instructor of Daikin Centrifugal, Reciprocating, Screw, and Scroll chillers

• Develops training programs, presentations• Has worked extensively training and assessing technicians in the fi eld

and provided job-site training• Provides off campus customer training and global technical support• Served four years in US Navy in the Seabees.

Don Derfl erTechnical Service Training InstructorDaikin Learning Institute

• Retired, working part-time• Previously served as Service Training Manager for 15 years• 40 years experience with McQuay and now Daikin Applied in various

capacities including service technician, Service Supervisor and District Service Manager for fi eld service

• As fi eld service technician, maintained, serviced, and repaired all types and brands of HVAC equipment including centrifugal chillers, screw compressor chillers, rooftop packaged systems, computer room cooling systems, pumps, cooling towers, pneumatic and DDC control systems, etc. as part of total building HVAC contracts

• Develops training programs, presentations, training materials and class scheduling

• Provides remote off campus customer training• Served 8 years in United States Navy in submarine service



Technical Service Instructor - Rooftops, SWP & Rebel

Brad HassingTechnical Service Training InstructorDaikin Learning Institute - Plymouth

• Certifi ed Rooftop, Self-Contained, and Rebel MicroTech® chiller control instructor for Daikin Learning Institute

• 36 years experience in commercial and industrial HVACR in service, management and training for various manufacturers

• Reviews and composes service literature and procedures• Develops training programs and presentations• Provides off campus customer training and global technical support• Experience includes commissioning, servicing, analyzing and maintain-

ing residential, commercial and industrial HVAC equipment



EnrollmentTo obtain the most effective training, carefully match your student(s) with the appropriate courses by evaluating the course content and objectives with them. Class size is limited and is offered on a fi rst-registered, fi rst-attend basis. Confi rmation of enrollment along with hotel and travel infor-mation will be sent to the student within fi ve working days after receipt of your paid application. Upon receipt of your confi rmation, check it carefully and contact the Training Administrator immediately at 540-248-9646 if you fi nd any discrepancies. An application received without full tuition payment does not reserve a space. If a class is full, we will contact the enrollee for standby or an alternate class date. Please verify your enrollment. If you do not receive an enrollment confi rmation letter two weeks prior to the start of class, contact the Training Administrator, as we may not have received your application.

CEU’s (Continuing Education Units)At the conclusion of the course that is awarding CEU’s, the student will review, discuss and be assessed with a test on the learning outcomes of the course. The test will be graded based on the percentage of ques-tions to determine the students’ learning outcome. A score of 70% will be required for successful completion of the course and to be awarded CEU’s (continuing education units).

RegistrationTo attend a course listed in this training catalog, there are two ways to enroll.

1. Complete the attached enrollment form and e-mail, mail, or fax to: Daikin Applied Attn: Linda Custer, Daikin Learning Institute PO Box 2510 Staunton, VA 24402-2510 PH: 540.248.9646 Fax: 763-509-7663 E-mail: [email protected]

2. Complete the enrollment form on www.daikinapplied.com/training and submit electronically.



PaymentPayment must be received in advance of the training course. If payment has not been made prior to the start of class, the student(s) will not be ad-mitted. Indicate your payment method on the registration form. Payment can be made by:• Major Credit Card. Complete the credit card information on the registra-

tion form• Check made out to Daikin Applied• Purchase orders are accepted to hold an enrollment, but payment is

due prior to the start of class.

Course SchedulingClasses begin at 8 a.m. and end at 5:00 p.m. Half days that are noted on the schedules are completed by noon of the last class date shown on the calendar. All other classes end at 5:00 p.m. Travel arrangements should be made to accommodate this schedule.

Cancellation PolicyRegistrations cancelled within 10 working days prior to course start date will be charged the full course fee. Cancellations made less than four weeks prior to the course start date will be charged 50% of the course fee. An alternate person may use a confi rmed space without penalty and substitutions may be made up until the start of class. It is the student's responsibility to cancel hotel reservations.

Daikin Learning Institute reserves the right to make changes or alterations to the course content or schedule. Daikin Learning Institute is not responsible for airline fees associated with changing dates or cancellation of classes. In the unlikely event of a schedule change or cancellation, every effort will be made to notify all registrants in a timely manner.

Hotel InformationA list of area hotels, with Daikin Applied preferred rates, will be provided with the class registration confi rmation. Students are responsible for making their own hotel arrangements. Hotels require a major credit card to guarantee room availability.



TransportationStudents are responsible for their own transportation to and from the training center. Hotels may not provide shuttle service, so check with them when making your reservations.

Factory ToursStudents are required to wear steel toe shoes during the plant tour, at all times when passing through the production areas, to and from the cafeteria through the plant and when participating in the hands-on teardown and as-sembly of the compressors. Safety glasses will be available for plant tours. Safety shoes are mandatory during compressor service courses.

Dress CodeOur dress code is business casual. No open toe shoes or shorts please.

Training MaterialsStudents attending our classes will receive a training manual and a fl ash drive , and should plan accordingly for transporting manual(s) back to their location.

Visit Us OnlineFor additional information or the most current course schedules, please visit our web page to learn more about Daikin roducts, services and training. Our Internet address is: HTTP://WWW.DAIKIN APPLIED.COM



Training Course Schedule

Course Title ModelsTraining Center

TuitionCourseLength

2015 Dates

Scroll Compressor ChillerMaintenance & Operation

AGZ, WGZ(ALR,WLR)

Staunton, VA $1600 3.5 daysApril 14 - 17

August 31 - September 3

Centrifugal Compressor ChillerMaintenance & Operation

WSC, WDC, WCC

(PFH, PEH)Staunton, VA $1600 3.5 days

April 21 - 24August 11 - 14

Centrifugal Compressor ChillerService & Compressor Repair

WSC, WDC, WCC

(PFH, PEH)Staunton, VA $4800 2 weeks

April 27 - May 8December 7 - 18

Air & Water Cooled Screw Compressor ChillerMaintenance, Operation, & Service

AGS, AWS,WGS

Staunton, VA $1750 4.5 daysMay 11 - 15

August 17 - 21

MagnitudeTM WMC Magnetic Bearing Compressor Chiller Maintenance & Operation

WMC Staunton, VA $1600 3.5 daysApril 7 - 10

September 29 - October 2

MagnitudeTM WMC Magnetic Bearing Compressor Chiller Service & Repair

WMC Staunton, VA $2600 4.5 daysFebruary 2 - 6

September 14 - 18November 16 - 20

MagnitudeTM WME Magnetic Bearing Compressor Chiller Maintenance & Operation

WME Staunton, VA $1600 3 days August 25 - 27

MagnitudeTM WME Magnetic Bearing Compressor Chiller Service & Repair

WME Staunton, VA $2600 4.5 daysMay 18 - 22

November 30 - December 4

Rooftop Service DC, Maverick™, RoofPak™

Plymouth, MN $1450 3.5 daysApril 7 - 10

October 6 - 9

Rebel™ Rooftop ServiceDPS Plymouth, MN $600 2.5 days

April 27-29 April 29 - May 1 - if needed

September 21 - 23 September 23 - 25 - if needed

Self-Contained ServiceSWP, SWT Plymouth, MN $875 2.5 days May 5 - 7

Water Source Heat Pumps WSHPEnfi nity, Console,

Vertical, HorizontalAuburn, NY $600 2 days

March 17 - 18September 15 - 16



Course LocationDaikin Applied207 Laurel Hill RdVerona, VA 24482

Course Fee$1,600

Course Length3.5 days

CEU's Offered Yes No

Testing Required Yes No

2015 Course ScheduleApr 14 - 17Aug 31 - Sep 3

Registration DeadlineApr 3Aug 21

The training fee is 10% higher for registrations received after the deadline.

Daikin Learning Instituteto ProvideInstruction MaterialsCoffee BreaksLunchGroup Dinner on fi rst night

Commercial Scroll Compressor Chiller Mainte-nance & Operation CourseThe Commercial Scroll Compressor Chiller Maintenance and Operation Course is structured to provide basic classroom instruction, demonstrations, and “hands-on” exercises designed to familiarize the student with the AGZ and WGZ product features, installation requirements, and service procedures for Daikin commercial recip & scroll compressor products. The standard program for this seminar is 3 1/2 days of intensive training.

Learning Outcomes:

In this course students will be instructed on:

• AGZ & WGZ unit components and chiller cycle review• Chill-water systems• How to read wiring diagrams, legends, symbols and notes• Split systems and piping• Motor protection, for semi-hermetic & scroll compressors• Capacity control systems• The phase voltage monitor• Condenser fan control• Chiller MicroTech® controllers• Scroll compressor design & operation• Refrigerant safety• The class includes product review, plant tour of manufacturing facility and

group hands-on training on MicroTech® simulators

Completion of this training course will allow the Daikin Applied Technical Response Center to provide technical assistance on Daikin Scroll products to students who attend this course.



Centrifugal Chiller Maintenance & Operation CourseThis brochure lists the dates for the continuation of the highly successful Centrifugal Chiller Maintenance and Operation training program. This training course is designed to teach the maintenance technician and building engineer how to maintain, operate, troubleshoot, and analyze performance of standard, non-magnetic Daikin centrifugal chillers.

To maximize the benefi t of the course, the student should have a basic understanding of refrigeration and air-conditioning systems.

The standard program for centrifugal chiller maintenance and operation is three and one half days of intensive training.

Learning Outcomes:

In this course, students will be instructed on:

• The basic cycle of water-cooled chillers• Centrifugal compressor theory• Components of MicroTech® control panels• Components of centrifugal chiller starters and solid-state starters• Centrifugal chiller VFD control• Wiring diagram review• Operational data analysis• MicroTech® system software and operation• Lubrication, vane system• Cooling towers & system performance analysis• Refrigerant charging procedures• The class includes product review, plant tour of manufacturing facility and

group hands-on training and trouble shooting on MicroTech® simulators

Completion of this training course will allow the Daikin Applied Technical Re-sponse Center to provide technical assistance on Daikin Centrifugal products to students who attend this course.


Course Fee$1,600




2015 Course ScheduleApr 21 - 24Aug 11 - 14

Registration DeadlineApr 10Jul 31






Course Fee$4,800

Course Length4.5 days (each week - 2 week course)



2015 Course ScheduleApr 27 - May 8Dec 7 - 18

Registration DeadlineApr 17Nov 20



Centrifugal Chiller Service & Compressor Repair

This four and one-half day course is designed to teach the service technician how to troubleshoot and recognize Daikin centrifugal chiller system operating problems. This course is the required prerequisite for the Centrifugal Compressor Repair Course and is scheduled in the week preceding the Centrifugal Compressor Repair to accommodate those students who will attend both courses. The technician must have attended this course within a year of the Centrifugal Compressor Repair Course.

Who May Attend:Subject to pre-qualifi cation, any mechanical contractor doing installation, maintenance and repairs of centrifugal chillers is eligible to send qualifi ed technicians to this course. The technician should have a good working knowledge of the refrigerant cycle, power and control circuitry, and be skilled in the use of standard service tools and electrical meters.

Learning Outcomes:

In week 1 course, students will be instructed on:

• Review of chiller service, centrifugal compressor service and operation• MicroTech® control systems• Wye Delta starters• Solid-state starters• Centrifugal chiller VFD• MicroTech programming & troubleshooting• Centrifugal compressor lubrication system• Dual compressor operation• General maintenance• Refrigeration charging and evacuation procedures• Chilled water & condenser water system analysis• Product review, plant tour of manufacturing facility and group hands-on

training on MicroTech® simulators

Completion of this training course will allow the Daikin Applied Technical Response Center to provide technical assistance on Daikin Centrifugal prod-ucts to students who attend this course.

(continued)




Course Fee$4,800Course Length4.5 days (each week - 2 week course)



2015 Course ScheduleApr 27 - May 8Dec 7 - 18

Registration DeadlineApr 17Nov 20



Centrifugal Chiller Service & Compressor Re-pair (continued)

This four and one-half day course is designed to teach the service technician how to disassemble and reassemble Daikin compressors, how to fi t and adjust internal operation parts and to understand normal compressor functions so as to be able to diagnose the cause of deviations from the norm.

Learning Outcomes:

In week 2 course, students will be instructed on:

• Centrifugal compressor repair procedures & processes

• The class is divided into four small groups, each of whom then rotate between 4 repair stations:

• Station 1 CE050 and Oil Pumps

• Station 2 CE063 (Old and New Versions)

• Station 3 CE079 and CE100

• Station 4 CE087 and CE126

• Trouble Shooting Oil Loss

NOTE: SAFETY SHOES ARE REQUIRED FOR THE COMPRESSOR REPAIR COURSE

Completion of this training course will allow the Daikin Applied Technical Response Center to provide technical assistance on Daikin Centrifugal products to students who attend this course.




Course Fee$1,750




2015 Course ScheduleMay 11 - 15Aug 17 - 21

Registration DeadlineMay 1Aug 7



Air & Water-Cooled Screw Chiller Maintenance, Operation & Service

The Air & Water-Cooled Screw Chiller Maintenance, Operation and Service Training Course is structured to provide basic classroom instruction, demon-strations, and “hands-on” exercises designed to familiarize the student with the product features, operation, maintenance and service requirements for Daikin screw chiller products. The standard program for the maintenance, operation and service seminar is four and one-half days of intensive training.

The products covered in this seminar will be the AGS and AWS air-cooled screw chillers and the WGS water-cooled chiller screw chiller.

Learning Outcomes:


• The basic cycle of air and water-cooled chillers• DX fl ooded evaporator• How to read electric schematics• Screw compressor design & components• Oil, refrigerant & economizer systems• Electrical systems• MicroTech® Microprocessor Control System for AGS, AWS & WGS• Electronic Expansion Valve• Solid-state starters, VFD & Wye Delta• General maintenance and service• Evacuation procedures• Refrigerant & oil charging procedures

• The class includes product review, plant tour of manufacturing facility and group hands-on training on MicroTech® simulators

Completion of this training course will allow the Daikin Applied Technical Response Center to provide technical assistance on Daikin Screw products to students who attend this course.




Course Fee$1,600Course Length3.5 days



2015 Course ScheduleApr 7 - 10Sep 29 - Oct 2

Registration DeadlineMar 20Sep 18



MagnitudeTM WMC Magnetic Bearing Chiller Maintenance & OperationThe Magnitude WMC magnetic bearing course is designed to teach the maintenance technician and building engineer how to maintain, operate, troubleshoot, and analyze performance of Magnitude WMC magnetic bearing chillers. The standard program for the Magnitude WMC magnetic bearing chiller course is three and one-half days of intensive training.

Learning Outcomes:


• The basic refrigeration cycle of water chillers• Magnetic bearing compressor theory• Magnitude bearing compressor design and operation• Magnitude WMC chiller control devices• MicroTech II® for Magnitude WMC software & sequence of operation• Electronic EXV valve operation• System performance evaluation & log sheet review• The class includes product review, plant tour of manufacturing facility

and group hands-on training on MicroTech® II simulators

Completion of this training course will allow the Daikin Applied Technical Re-sponse Center to provide technical assistance on Magnitude WMC products to students who attend this course.




Course Fee$2,600




2015 Course ScheduleFeb 2 - 6Sep 14 - 18Nov 16 - 20

Registration DeadlineJan 24Sep 5Nov 6



MagnitudeTM WMC Magnetic Bearing Chiller Service & RepairThe Magnitude WMC magnetic bearing chiller service & repair course is designed to teach the maintenance and service technician how to maintain, operate, troubleshoot, and repair Magnitude WMC magnetic bearing chillers. The standard program for the Magnitude WMC magnetic bearing chiller course is four and one-half days of intensive training.

Learning Outcomes:


• The basic refrigeration cycle of water chillers

• Magnetic bearing compressor theory

• Magnetic bearing compressor design and operation

• Magnitude WMC chiller control devices

• Magnitude WMC compressor sequencing, MicroTech® II for WMC soft-ware & programming

• Magnitude WMC compressor monitor interface

• Electronic expansion valve operation (EXV)

• Variable speed drive theory, components & operation

• System performance evaluation

• The class includes product review, plant tour of manufacturing facility and group hands-on training on MicroTech® II simulators

• Compressor repair & diagnostics

• Includes compressor test harness

• Hands-on compressor repair

• Upon completion, student is eligible for WMC compressor support site access

Completion of this training course will allow the Daikin Applied Technical Re-sponse Center to provide technical assistance on Magnitude WMC products to students who attend this course.




Course Fee$1,600Course Length3 days



2015 Course ScheduleAug 25 - 27

Registration DeadlineAug 14



MagnitudeTM WME Magnetic Bearing Chiller Maintenance & OperationThe Magnitude WME magnetic bearing chiller course is designed to teach the maintenance and service technician how to maintain and operate the Magnitude WME magnetic bearing chillers.The standard program for the Magnitude WME magnetic bearing chiller maintenance & operation is three days of intensive training.

Prerequisite:The student should have a minimum of 5 years experience with Centrifugal chillers to maximize the benefi t of this course. The Magnitude WME chiller uses a centrifugal compressor that has highly technical components.

Learning Outcomes:


• The basic refrigeration cycle of water chillers• Magnetic bearing centrifugal compressor theory• Magnetic bearing compressor design and operation• Magnitude WME centrifugal chiller control devices• Magnitude WME MicroTech E® for Magnitude WME software &

programming• Electronic expansion valve operation (EXV)• Variable speed drive theory, components and operation• System performance evaluation• General maintenance and service procedures• Evacuation and charging procedures• The class includes product review and plant tour of manufacturing facility

Completion of this training course will allow the Daikin Applied Technical Re-sponse Center to provide technical assistance on Magnitude WME products to students who attend this course.




Course Fee$2,600Course Length4.5 days



2015 Course ScheduleMay 18 - 22Nov 30 - Dec 4

Registration DeadlineMay 8Nov 13



MagnitudeTM WME Magnetic Bearing Chiller Service & RepairThe Magnitude WME magnetic bearing centrifugal chiller service and repair course is designed to teach the maintenance and service technician how to maintain, operate, troubleshoot, and repair the Magnitude WME magnetic bearing chillers. The standard program for the Magnitude WME service and repair course is four and one-half days of intensive training.

Prerequisite:The student should have a minimum of 5 years experience with Centrifugal chillers to maximize the benefi t of this course. The Magnitude chiller uses a centrifugal compressor that has highly technical components.

Learning Outcomes:


• The basic refrigeration cycle of water chillers• Magnetic bearing centrifugal compressor theory• Magnetic bearing compressor design and operation

• Magnitude WME control devices• Magnitude WME MicroTech E® for Magnitude WME software &

programming• Electronic expansion valve operation (EXV)• Variable speed drive theory, components and operation• System performance evaluation• Compressor Service Tool software• General maintenance and service procedures• Evacuation and charging procedures• Compressor diagnostics and repair• VFD repair• The class includes product review and plant tour of manufacturing facility

Completion of this training course will allow the Daikin Applied Technical Re-sponse Center to provide technical assistance on Magnitude WME products to students who attend this course.



Course LocationDaikin Applied13600 Industrial Park BlvdMinneapolis, MN 55441

Course Fee$1,450




2015 Course ScheduleApr 7 - 10Oct 6 - 9

Registration DeadlineMar 20Sep 25


Daikin Learning Instituteto ProvideInstruction MaterialsCoffee BreaksLunch

Rooftop ServiceThe Rooftop Service Course is structured to provide basic classroom instruction, demonstrations and “hands-on” exercises designed to familiarize the student with the product features, installation requirements and service procedures for Daikin Applied rooftops.

Each student will work with simulators for both the MicroTech® II and MicroTech III control systems. The emphasis of “hands-on” training will be to enhance the technicians’ knowledge of good service and troubleshoot-ing practice.

To get the most from the course, the student should have an understanding of the refrigeration cycle, basic electrical power and simple air conditioning control circuits. The course will use these basic concepts to develop an understanding of the Daikin rooftop products.

The program for Rooftop Service training is three and one half days of intensive training.

Learning Outcomes:


• Unit commissioning• Maintenance• Diagnostics• Troubleshooting• Variable-speed drives, actuators, compressors• Burners• Maverick™ service training• MicroTech® II & III for Rooftops• Hardware components, keypad navigation, sequence of operation




Course Fee$600




2015 Course ScheduleApr 27 - 29Apr 29 - May 1 (if 2nd session is needed)

Sep 21 - 23Sep 23 - 25 (if 2nd session is needed)

Registration DeadlineApr 17Sep 11



Rebel™ Rooftop ServiceThe Rebel™ Rooftop Unit Maintenance & Operation Course is structured to provide basic classroom instruction, demonstrations, and “hands-on” exercises designed to familiarize the student with the product features, installation requirements, and service procedures for the Daikin Rebel™ rooftop product.

In our training lab, each student will work with selected operating product simulators. The emphasis of this “hands-on” training will be to enhance the technician’s knowledge of good service and electrical trouble shooting practices.

To get the most from the course, the student should have an understand-ing of the refrigeration cycle, basic electrical power and simple air conditioning control circuits. The course will use these basic concepts to develop an understanding of the Daikin Rebel™ Rooftop products.

Rebel Rooftop Service Control Training Includes the MicroTech® III Control System.

The program for Rebel Rooftop Service training is two and on-half days of intensive training.

Learning Outcomes:


• The unit components and refrigeration cycle• How to read wiring diagrams, legends, symbols and notes• How to navigate the MicroTech III® control system for the• Rebel rooftop unit• Rebel rooftop Inverter technology• Gas heat• Commissioning & trouble shooting• MicroTech III® control systems• General maintenance




Course Fee$875.00




2015 Course ScheduleMay 5 - 7

Registration DeadlineApr 24



Self-Contained ServiceThis program is structured to provide basic classroom instruction, demonstra-tions and “hands-on” exercises designed to familiarize the student with the product features, installation requirements and service procedures for Daikin self-contained Units.

Each student will work with simulators for both the MicroTech® II and MicroTech III control systems. The emphasis of “hands-on” training will be to enhance the technicians’ knowledge of good service and troubleshoot-ing practice.

To get the most from the course, the student should have an understanding of the refrigeration cycle, basic electrical power and simple air condition-ing control circuits. The course will use these basic concepts to develop an understanding of the Daikin self-contained product. The program for Self-Contained Service training is two and one half days of intensive training.

Learning Outcomes:


• Unit commissioning• Maintenance• Diagnostics• Troubleshooting• Variable-speed drives, actuators, compressors for self-contained units• MicroTech® II & III for self-contained units• Hardware components, keypad navigation, sequence of operation



Course LocationDaikin Applied4900 Technology Park BlvdAuburn, NY 13021

Course Fee$600

Course Length2 days



2015 Course ScheduleMar 17 - 18Sep 15 - 16

Registration DeadlineFeb 27Aug 28



Water Source Heat PumpGet all the information you need about Daikin’s Water Source Heat Pumps, MTIII® and Mark IV controls. This course is two days of intensive training. This course is designed to teach the experienced service techni-cian to commission, maintain, operate and troubleshoot Water Source Heat Pumps, MicroTech ® III, and Mark IV controls.

This program is structured to provide basic classroom instruction to famil-iarize the student with the operation of the new Water Source Heat Pumps and the fundamentals of MicroTech III® controls. It is assumed that the student understands basic Water Source Heat Pump operation and HVAC systems.

Classroom sessions include hands-on exercises using controls simulators and actual operational units.

Learning Outcomes:


• Basic Unit Design• SmartSource WSHP• Enfi nity WSHP• Console WSHP• Vertical Stack WSHP• Unit Installation• Horizontal WSHP• Vertical WSHP• Console WSHP• Vertical Stack WSHP• Check Test and Start• MicroTech III• Mark IV• ECM Motor Operation and Speed Settings• Options

• Unit Demo



Off-Campus Training in Your Area

Looking for Convenient, Professional Training on Your Daikin Commercial HVAC Equipment?

We Can Come to Your Location!For your convenience, the Daikin Learning Institute offers commercial HVAC equipment operation and maintenance training programs at your location. Our most popular training courses are available in your facility, at fl exible schedules based on instructor availability. Class fees are established based on the number of course attendees and travel required. Note that a minimum number of students is required.

• Centrifugal Maintenance & Operation Course

• Screw Chiller Maintenance & Operation Course

• Commercial Scroll Compressor Chiller Unit Maintenance & Operation Course

• MagnitudeTM WMC Magnetic Bearing Model Chiller Maintenance & Operation Course

• MagnitudeTM WME Magnetic Bearing Chiller Maintenance & Operation Course

• Rooftop Packaged Unit and/or Self-Contained Unit Operation & Maintenance Course

• MicroTech® II and MicroTech III Controls for Applied Air Systems

Contact the Daikin Learning Institute to schedule off-campus training at your location.

Daikin Applied Daikin Learning Institute P.O. Box 2510 Staunton, VA 24402-2510 Phone: 540.248.9646 Fax: 763.509.7663 email: [email protected]

Visit the DaikinMcQuay website, www.DaikinApplied.com for current schedules.



Off Campus Training Terms & ConditionsDaikin Learning Institute will perform training at a customer’s facility under the following terms and conditions.

Recording of ClassesAudio or video recording of Training sessions may be made only with Daikin’s prior express written permission. Any permitted recordings are subject to these terms and conditions.

Content RightsAll materials relating to training remain Daikin’s property. Copies or distribution of such material may be made only with Daikin’s express prior written consent.

Payments All training sessions will be billed upon order. Payments will be subject to Daikin’s standard terms and conditions. If payment is past due at the scheduled start date of the training, the instructor will perform training at Daikin’s sole discretion.

ResponsibilitiesThe customer is responsible for facilities, meals and other logistics related to the training unless prior arrangements have been made with Daikin. Daikin assumes no responsibility for these items.

Daikin will provide training and materials for the number of registered participants. There will be an additional charge for additional students, based upon the original price per student.

SchedulingTraining is by appointment only. Availability of instructors is at Daikin’s sole discretion.

ContentThe purpose of training is to provide customers with information valuable to the operation or maintenance of their equipment. Daikin retains the right to determine appropriate content for the agreed-upon topic.

Warranty and DisclaimerTraining information will be materially similar to that used by Daikin Applied in training its own technicians. In the event it is not, Daikin will provide corrected, updated, or additional information, or, at its option, refund a pro rata portion of the price. THIS IS THE ONLY WARRANTY AND THE CUSTOMER’S ONLY REMEDY WITH REGARD TO TRAINING. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED. WITHOUT LIMITING THE FOREGOING, THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES WILL DAIKIN BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Because of the variation among participants’ experience, prior training, and learning abilities, Daikin does not warrant that any particular student will attain any particular level of expertise or competence, and does not warrant any particular results of the training. The customer must satisfy itself as to the applicability and suffi ciency of the training for its facility and resources. The customer will defend, indemnify, and hold Daikin harmless against any claim arising out of or related to training, and will waive subrogation of any such claim. Daikin may modify these terms and conditions at any time, in its sole discretion, and such modifi cations shall be effective immediately upon posting.



Service Training Registration FormCourse Title: Dates: 1st & 2nd Choice: Course Location: Company Name: Mailing Address: City, State, Zip: Student Name: Email: Phone Number: Fax Number: Submitted By: Email: Phone Number: Fax Number:

TRAINING MATERIALS - Student(s) will be given both a training manual and fl ash drive.Student(s) should plan accordingly to allow for extra baggage.

PLEASE SPECIFY PAYMENT OPTION BELOW AND COMPLETE ALL INFORMATION.

Company Name: Billing Address: City, State, Zip: Phone Number: Fax Number:

� PURCHASE ORDER: (Purchase Order MUST accompany registration) � CHECK (Due prior to start of class)

� CREDIT CARD: � Master Card � VISA � American Express � Discover (Novus)

Card Number: | | | | | | | | | | | | | | | | |

Expiration Date: / /

Cardholder Printed Name:

PAYMENT IS DUE IN ADVANCE OR STUDENT(S) WILL NOT BE ADMITTED.

Mail copy of application form and check to: Fax application, copy of purchase order/check to:Daikin Applied/ Attn: Daikin Learning Institute Linda Custer at 763-509-7663P.O. Box 2510 E-mail to:Staunton, VA 24402-2510 [email protected]

Daikin Learning Institute reserves the right to make changes or alternations to the course content or schedule, and is not responsible for fees associated with changing dates or cancellation of classes. In the unlikely event of a schedule change or cancellation, our best effort will be made to notify all registrants in a timely manner.



Notes:

www.DaikinApplied.com

Documents

Daikin Learning Institute - Hoffman & Hoffman, Inc | HVAC ...€¦ · Daikin Learning Institute ... Air & Water-Cooled Screw Chiller Maintenance, ... screw compressor chillers, rooftop