2
DAFA WindFoil 95 TM Application DAFA WindFoil 95 is used as a wind barrier in a ventilated, light external wall cladding. DAFA WindFoil 95 may only be used behind cladding that is sealed against UV light. The material DAFA WindFoil 95 is made from a three-layer foil with high tearing strength and water-tight special coat- ing with UV and IR stabilisers, which impede the aging process. DAFA WindFoil 95 is supplied with dotted lines on both sides marking the 150 mm overlap. The fabric is coated with a special anti-reflective coating and is permeable with an S d value of approx. 0.02 m. The S d value must be multiplied by a factor of approx. 5.7 to obtain the Z value. Supplied sizes DAFA WindFoil 95 is supplied in rolls with a width of 1.5 m and a length of 50 m. Transport, delivery and storage DAFA WindFoil 95 is supplied in rolls packed in PE Foil. DAFA WindFoil 95 is transported and stored horizon- tally on a Europallet, and must only be stacked to a height of two pallets. DAFA WindFoil 95 must be protected against the weather and direct sun- light. Quality assurance DAFA WindFoil 95 is CE-marked according to EU standard EN 13859- 2:2014 and EN 13859-1:2014 DAFA WindFoil 95 is a part of DAFA AirVent System and is a strong, three-layer, permeable fabric which can be used as a wind barrier in a light external wall structure. Seal behind roofs and facades Technical specifications Roll dimensions 1.5 x 50 m Weight Approx. 95 g / m 2 ± 5% Weight per roll Approx. 7 kg Reaction to fire Fire classification E, EN 13501-1 Tearing strength 80 N (±10), EN 12310-1 Elongation upon failure Ca. 210/90 N/5 cm, EN 12311-2 Exposure time Max. four weeks without masking S d value Approx. 0.02 m Item number 620020403 EAN number 570505636384160 Dimensions DAFA WindFoil 95 is easy to roll out, with a low weight of only 95 g / m 2 . With 50 m on each roll, the number of joints can be reduced significantly. 50 m 1.5 m DAFA AirVent System® is a registered trademark in the EU F U N C T I O N A N D P R O D U C T W A R R A N T Y YEAR Insured by DAFA offers a function and product warranty for 10 years on all products associated with DAFA AirVent System. Distributed in UK by RCM www.buildingboards.co.uk T. 0800 612 4662

DAFA WindFoil 95TM - Building Boards and Facades · 2017. 10. 19. · DAFA A/S • Holmstrupgårdvej 12 • DK-8220 Brabrand • Tel. +45 87 47 66 66 • E-mail [email protected] • MAY

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: DAFA WindFoil 95TM - Building Boards and Facades · 2017. 10. 19. · DAFA A/S • Holmstrupgårdvej 12 • DK-8220 Brabrand • Tel. +45 87 47 66 66 • E-mail dafa@dafa.dk • MAY

DAFA WindFoil 95TM

ApplicationDAFA WindFoil 95 is used as a wind barrier in a ventilated, light external wall cladding. DAFA WindFoil 95 may only be used behind cladding that is sealed against UV light.

The materialDAFA WindFoil 95 is made from a three-layer foil with high tearing strength and water-tight special coat-ing with UV and IR stabilisers, which impede the aging process. DAFA WindFoil 95 is supplied with dotted lines on both sides marking the 150 mm overlap. The fabric is coated with a special anti-reflective coating and is permeable with an S

d value of

approx. 0.02 m. The Sd value must

be multiplied by a factor of approx. 5.7 to obtain the Z value.

Supplied sizesDAFA WindFoil 95 is supplied in rolls with a width of 1.5 m and a length of 50 m.

Transport, delivery and storageDAFA WindFoil 95 is supplied in rolls packed in PE Foil. DAFA WindFoil 95 is transported and stored horizon-tally on a Europallet, and must only be stacked to a height of two pallets. DAFA WindFoil 95 must be protected against the weather and direct sun-light.

Quality assuranceDAFA WindFoil 95 is CE-marked according to EU standard EN 13859-2:2014 and EN 13859-1:2014

DAFA WindFoil 95 is a part of DAFA AirVent System and is a strong, three-layer, permeable fabric which can be used as a wind barrier in a light external wall structure.

Seal behind roofs and facades

Technical specifications

Roll dimensions 1.5 x 50 m

Weight Approx. 95 g / m2 ± 5%

Weight per roll Approx. 7 kg

Reaction to fire Fire classification E, EN 13501-1

Tearing strength 80 N (±10), EN 12310-1

Elongation upon failure Ca. 210/90 N/5 cm, EN 12311-2

Exposure time Max. four weeks without masking

Sd value Approx. 0.02 m

Item number 620020403

EAN number 570505636384160

DimensionsDAFA WindFoil 95 is easy to roll out, with a low weight of only 95 g / m2.

With 50 m on each roll, the number of joints can be reduced significantly.

50 m

1.5 m

DAFA AirVent System® is a registered trademark in the EU

FUN

CTI

ON

A

ND PRODUCT WA

RR

AN

TYFUN

CTI

ON

A

ND PRODUCT WA

RR

AN

TY

FUN

CTI

ON

A

ND PRODUCT WA

RR

AN

TY

FUN

CTI

ON

A

ND PRODUCT WA

RR

AN

TY

YEARYEARYEARYEAR

FUN

CTI

ON

A

ND PRODUCT WA

RR

AN

TY

YEAR

Insured by

DAFA offers a function and product warranty for 10 years on all products associated with DAFA AirVent System.

Distributed in UK by RCMwww.buildingboards.co.ukT. 0800 612 4662

Page 2: DAFA WindFoil 95TM - Building Boards and Facades · 2017. 10. 19. · DAFA A/S • Holmstrupgårdvej 12 • DK-8220 Brabrand • Tel. +45 87 47 66 66 • E-mail dafa@dafa.dk • MAY

DAFA A/S • Holmstrupgårdvej 12 • DK-8220 Brabrand • Tel. +45 87 47 66 66 • E-mail [email protected] • www.dafa.dkMAY 2017

DAFA WindFoil 95TM

External wall structuresDAFA WindFoil 95 is suitable as a wind barrier in a light, external wall structure with a ventilated cavity behind the rainshield on the facade.

DAFA WindFoil 95 is particularly suitable for installing in construc-tions behind rainshields made of wood, metal, brick, etc. and can be installed both horizontally and vertically.

Installation

DAFA WindFoil 95 rolls out quickly, retains its shape and the lengths are not deformed when rolling out. As DAFA WindFoil 95 is permeable, it can be insulated right out to the fabric.

DAFA WindFoil 95 should be rolled out with the product name fac-ing outward and with a minimum overlap of 150 mm. Joints are taped with DAFA UV tape for a full seal. DAFA WindFoil 95 must be masked with facade cladding as quickly as possible and within a maximum of four weeks from installation.

DAFA WindFoil 95 is used as a wind bar-rier with a ventilated cavity behind the rainshield.

DAFA WindFoil 95 is installed as a wind barrier with a minimum overlap of 150 mm and free joints are taped using DAFA UV tape.

DAFA WindFoil 95 as a wind barrier in ventilated external wall cladding.

Read more at www.dafa-as.com

outside inside

Accessories for DAFA WindFoil 95

DAFA AirVent System comprises a range of accessories for DAFA WindFoil 95 which are special products that make difficult details easier and ensure a fully sealed installation. Read more at www.dafa-as.com/airvent

DAFA UV tapeAdhesive tape with maximum adhesion.

DAFA Roof deck-ing adhesive Permanent elastic special rubber for external use.

DAFA UV cable collarFully sealed conduits for cables or electrical boxes.

DAFA UV pipe collarFully sealed conduits for round or rectangular pipes.