GENERATORS AUSTRALIA www.generatorsaustralia.com.au (08) 6258 4195 GENERAL ENGINE ALTERNATOR Model Power Type Prime Power (kW/kVA) Standby Power (kW/kVA) Engine Make and Model Engine Type Engine Prime Power (kW) Engine Standby Power (kW) Fuel Tank Capacity (L) Fuel Consumption (L/h)* Battery Type Bore (mm) x Stroke (mm) No. of Cylinders Displacement (L) Compression Ratio Intake Model Speed Control System Lubricating Oil Capacity (L) Lub Consumption (g/kW/h) *Fuel Consumption is based on 100% load Model Frequency (Hz) Continuous Output (kW/kVA) Power Efficiency Type Exciter Type Voltage Regulator Voltage Regulation No. of Phases Insulation Protection Rated Power Factor Stator Winding Winding Pitch Winding Leads Waveform Distortion Altitude (m) D48/S Diesel 48/60 53/66 DEUTZ BF4M2012 Water-cooled, in line, 4 stroke, 1500rpm 51 60 335 9.67 Lead-acid, 2 x 12V - 120AH 101 x 126 4 4.04 18 Turbo charged Mechanical speed governing 8.5 0.663 SLG224E1, single bearing 50 48/60 88.2% 4 pole, rotating field Brushless, self excited AS440 +1.0% 3 phases, 4 wire Class H IP22 0.8 Double layer concentric Two thirds 12 No load <1.5% 1000 STANDARD FEATURES CONTROL SYSTEM QUALITY STANDARDS n 50°C rated radiator n Powder coated finish n External fuel tank connections n EVAC service points n 110% bunded skid base n All moving parts are fitted with safety guards n Fitted sockets RCD protectors: 2 x 1Ph 15amp 3 pin 2 x 3Ph 32amp 5 pin 1 x 3Ph 63amp 5 pin n IP65 electrical boxes n IP66 electrical outlets n Rated lifting lugs n Emergency E stop n State of the art control system - Deep Sea n Door safety interlocks The DSE6020 is an Auto Mains Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications. Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level, the module will display warnings, shutdown and engine status information on the back-lit LCD screen and illuminated LED. Our generator sets are compliant with all the main standards, such as ISO8528, ISO14000, GB755, BS5000, VDE0530, ISO3046, IEC34-1, AS3000. ASSEMBLY The engine and alternator are closed coupled by means of an SAE flange. A full torsional analysis has been carried out to guarantee no harmful vibration will occur. Anti- vibration pads are affixed between engine alternator feet and base frame. Rubber diagonal isolators are specifically designed to reduce engine and alternator vibration and prevent distortion in the voltage and harmonic output of the generator. All iron and steel surfaces of the canopy fabrication have been sand blasted and then powder coated, which provides an excellent corrosion resistant surface. WARRANTY POLICY 12 months, 1200 hours as per generator. Generators Australia Pty Ltd Warranty Policy. D48/S SPECIFICATIONS 60kVA UNIT Dimensions L x W x H (m) Dry Weight (kg) Sound at 7m/dB 2.7 x 1.5 x 1.7 1780 73 German Technology. Australian Design. Powered by DSE6020

D48/S SPECIFICATIONS 60kVA - Generators Australia · D48/S Diesel 48/60 53/66 DEUTZ BF4M2012 Water-cooled, in line, 4 stroke, 1500rpm 51 60 335 9.67 Lead-acid, 2 x 12V - 120AH 101

Download PDF Report

Upload
others
View
15
Download
0

Embed Size (px)

Citation preview

GENERATORSAUS T R A L I A

www.generatorsaustralia.com.au (08) 6258 4195

GENERAL

ENGINE

ALTERNATOR

ModelPower TypePrime Power (kW/kVA)Standby Power (kW/kVA)

Engine Make and ModelEngine TypeEngine Prime Power (kW)Engine Standby Power (kW)Fuel Tank Capacity (L)Fuel Consumption (L/h)*Battery TypeBore (mm) x Stroke (mm) No. of CylindersDisplacement (L)Compression Ratio Intake ModelSpeed Control SystemLubricating Oil Capacity (L)Lub Consumption (g/kW/h)

*Fuel Consumption is based on 100% load

ModelFrequency (Hz)Continuous Output (kW/kVA)Power EfficiencyTypeExciter TypeVoltage RegulatorVoltage RegulationNo. of PhasesInsulationProtectionRated Power FactorStator WindingWinding PitchWinding LeadsWaveform DistortionAltitude (m)

D48/SDiesel48/6053/66

DEUTZ BF4M2012Water-cooled, in line, 4 stroke, 1500rpm51603359.67Lead-acid, 2 x 12V - 120AH101 x 12644.0418Turbo chargedMechanical speed governing8.50.663

SLG224E1, single bearing 5048/6088.2%4 pole, rotating fieldBrushless, self excitedAS440+1.0% 3 phases, 4 wireClass HIP220.8Double layer concentricTwo thirds12No load <1.5%1000

STANDARD FEATURES

CONTROL SYSTEM

QUALITY STANDARDS

n 50°C rated radiatorn Powder coated finishn External fuel tank connectionsn EVAC service pointsn 110% bunded skid basen All moving parts are fitted with safety guardsn Fitted sockets RCD protectors: 2 x 1Ph 15amp 3 pin 2 x 3Ph 32amp 5 pin 1 x 3Ph 63amp 5 pinn IP65 electrical boxesn IP66 electrical outlets n Rated lifting lugsn Emergency E stopn State of the art control system - Deep Sean Door safety interlocks

The DSE6020 is an Auto Mains Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications. Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level, the module will display warnings, shutdown and engine status information on the back-lit LCD screen and illuminated LED.

Our generator sets are compliant with all the main standards, such as ISO8528, ISO14000, GB755, BS5000, VDE0530, ISO3046, IEC34-1, AS3000.

ASSEMBLYThe engine and alternator are closed coupled by means of an SAE flange. A full torsional analysis has been carried out to guarantee no harmful vibration will occur. Anti-vibration pads are affixed between engine alternator feet and base frame. Rubber diagonal isolators are specifically designed to reduce engine and alternator vibration and prevent distortion in the voltage and harmonic output of the generator. All iron and steel surfaces of the canopy fabrication have been sand blasted and then powder coated, which provides an excellent corrosion resistant surface.

WARRANTY POLICY 12 months, 1200 hours as per generator. Generators Australia Pty Ltd Warranty Policy.

D48/S SPECIFICATIONS60kVA

UNIT

Dimensions L x W x H (m)Dry Weight (kg)Sound at 7m/dB

2.7 x 1.5 x 1.7178073

German Technology. Australian Design.Powered by

DSE6020