D Y Patil Institute of Engineering and Technology, Ambi, Pune

D Y Patil Institute of Engineering and

Technology, Ambi, Pune Address:Sr.No.124 & 126, A/p- Ambi, Tal-Maval, MIDC Road,

TalegaonDabhade, Pune-410506, Maharashtra, India

Tel: 02114306229, E-mail : [email protected] URL: www.dypietambi.com

2.6.1 Programme outcomes, Programme specific outcomes and course outcomes

for all Programme offered by the institution.

Sr. No. Description Page No.

01 Vision and Mission 2

02 Program Outcomes(POs) 3

03 Program Specific Outcomes (PSOs):

Department of Civil Engineering 5

Department of Computer Engineering 5

Department of Electrical Engineering 6

Department of Information Technology 6

Department of Mechanical Engineering 7

04 Course Outcomes (COs) :

Department of Civil Engineering 8

Department of Computer Engineering 19

Department of Electrical Engineering 30

Department of Information Technology 42

Department of Mechanical Engineering 52

Department of First Year Engineering 64

05 Departmental Minutes of Meeting 69

06 CO PO Student Undertaking 71

1

Our Vision: To excel in technical education & strive for developing competent professionals to

meet future challenges with social awareness

Our Mission:

To impart quality education

To foster industry institute interaction

To strengthen co-curricular, extra-curricular and extension activities

To install ethical and moral values in budding engineers

http://www.dypietambi.com/vissionAndMission.php

2

http://www.dypietambi.com/vissionAndMission.php

Program Outcomes (POs):

Engineering Graduates will be able to:

1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering

fundamentals, and an engineering specialization to the solution of complex engineering

problems.

2. Problem analysis: Identify, formulate, review research literature, and analyze complex

engineering problems reaching substantiated conclusions using first principles of

mathematics, natural sciences, and engineering sciences.

3. Design/development of solutions: Design solutions for complex engineering problems and

design system components or processes that meet the specified needs with appropriate

consideration for the public health and safety, and the cultural, societal, and environmental

considerations.

4. Conduct investigations of complex problems: Use research-based knowledge and research

methods including design of experiments, analysis and interpretation of data, and synthesis of

the information to provide valid conclusions.

5. Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern

engineering and IT tools including prediction and modeling to complex engineering activities

with an understanding of the limitations.

6. The engineer and society: Apply reasoning informed by the contextual knowledge to assess

societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to

the professional engineering practice.

7. Environment and sustainability: Understand the impact of the professional engineering

solutions in societal and environmental contexts, and de monstrate the knowledge of, and

need for sustainable development.

8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and

norms of the engineering practice.

9. Individual and team work: Function effectively as an individual, and as a member or leader

in diverse teams, and in multidisciplinary settings.

3

10. Communication: Communicate effectively on complex engineering activities with the

engineering community and with society at large, such as, being able to comprehend and

write effective reports and design documentation, make effective presentations, and give and

receive clear instructions.

11. Project management and finance: Demonstrate knowledge and understanding of the

engineering and management principles and apply these to one’s own work, as a member and

leader in a team, to manage projects and in multidisciplinary environments.

12. Life-long learning: Recognize the need for, and have the preparation and ability to engage in

independent and life- long learning in the broadest context of technological change.

4

Program Specific Outcomes (PSOs):

Department of Civil Engineering

PSO1:

To build competencies towards problem solving with an ability to understand,

identify, analyze and design the problem, implement and validate the solution

including both hardware and software.

PSO2:

To build appreciation and knowledge acquiring of current computer techniques with

an ability to use skills and tools necessary for computing practice.

PSO3:

To be able to match the industry requirements in the area of computer science and

engineering. To equip skills to adopt and imbibe new technologies.

Department of Computer Engineering

PSO1:

To be able to understand, analyze and develop computer programs in the areas

related to algorithms, system software, multimedia, web design, big data analytics,

and networking by efficient design of computer-based systems of varying

complexities.

PSO2:

To be able to apply standard practices and strategies in software project development

using open-ended programming environments to deliver a quality product for

business success.

PSO3:

To be able to utilize modern techniques and adopt latest trends in technological

development to match the industry requirements and create innovative career paths to

be an entrepreneur or researcher.

5

Department of Electrical Engineering

PSO1:

To understand the fundamentals of electrical engineering and analysis of circuit

topology.

PSO2:

To obtain the knowledge of electrical power system at par with recent technology for

end user applications.

PSO3:

To apply the concepts of electrical machines and drives, in concurrence with

advanced electronics & control system for the design of reliable electrical system.

PSO4:

To apply knowledge of engineering for developing skill sets for operation and

maintenance

Department of Information Technology

PSO1: Participating in planning, implementing & execution of various algorithms to build

specific applications in networking, databases, neural networks & artificial

intelligence.

PSO2: Provide skilled resource to learn various advanced languages for solving real world

problems.

PSO3: Apply the knowledge of technology ethics, management principles and soft skills to

carry out social IT projects in diverse environments as a member and leader in a

team.

6

PSO4: Apply core aspects of Information Technology, standard Software Engineering

practices and strategies in software project development in order to deliver quality

product for IT industry.

Department of Mechanical Engineering

PSO1:

Apply the principles of design, analysis and implementation of mechanical

component/system/process

PSO2:

Recognize, investigate and formulate and use of suitable technique in mechanical

engineering to obtain solution for various problems of industry and society

PSO3:

Contribute to the project teams in the core and related domains by using modern

tools of drafting, modeling and analyzing

PSO4:

Possesses adequate interpersonal skills to solve the problems

7

Course outcomes (COs) Civil Engineering

S.E. Civil (2015 course)

Semester - I

Subject/

Course

code

Subject/Course

Name Course Outcomes (COs)

201001

Building

Technology and

Materials

Identify types of building and basic requirements of building

components.

Explain types of masonry, formwork, casting procedure and

necessity of underpinning and scaffolding.

Elucidate different types of flooring and roofing materials.

Describe types of doors, windows, arches and lintel.

Illuminate means of vertical circulation and protective

coatings.

Explain different materials especially eco-friendly materials

and safety measures to be adopted at any construction site.

207001 Engineering

Mathematics III

Solve higher order linear differential equations and apply to

civil engineering problems such as bending of beams and

whirling of shafts.

Solve system of linear equations using direct and iterative

numerical techniques and develop solutions to ordinary

differential equations using single step and multistep

methods applied to structural systems.

Apply statistical methods like correlation, regression

analysis in analyzing and interpreting experimental data and

probability theory applied to construction management.

Perform vector differentiation and integration, analyze the

vector fields and apply to fluid flow problems.

Solve various partial differential equations such as wave

equation, one and two dimensional heat flow equations.

Applications of Partial Differential Equations (PDE)

201006 Surveying

To learn the basics of plane surveying and different types of

instruments used for plane surveying. To learn different

methods of surveying.

To understand the leveling of earth surface and able to draw

the profile of ground.

Students able to operate and check the instrument used for

8

Subject/

Course

code

Subject/Course


surveying. And locating points on ground having equal

elevation by contouring.

To be able to operating and checking for accuracy to angular

measuring instrument.

To be able to plotting the curve for diversion for any route.

Students able to set the building, road, canal etc. project with

establishing control points. To understand advancements in

plane surveying such as electronic instruments and

software’s.

201002 Strength of

Materials

Compute different type of stresses in determinate,

indeterminate, homogeneous and composite structures.

Develop bending and shear stress diagram.

Determine the torsional stresses and stresses due to strain

energy for different loading Conditions.

Explain the concept of principal stresses due to combined

loading and able to compare the values of analytical and

graphical (Mohr’s circle) method.

Plot loading diagram, Shear Force Diagram (SFD) and

Bending Moment Diagram (BMD).

Analyze axially and eccentrically loaded column.

201003 Geotechnical

Engineering

Differentiate the different types of soil and determine their

index and engineering properties in laboratory and classify

them and develop a proficiency in handling experimental

data.

Develop an understanding of the influence of water flow on

the engineering behavior of soils by learning concepts of

permeability and seepage.

Analyze engineering properties like compaction,

permeability, soil shear strength. To analyse the effects of

compaction on soil properties.

Understand of the concept of effective stress and its

influence on soil behavior. Also differentiate between

various methods of determining shear strength of soil with

their advantages and limitations.

Compute the lateral thrust due to backfill on the retaining

walls.

Classify soil slopes and identify their modes of failure.

9

Semester - II

Subject/

Course

code

Subject/Course


201004 Fluid Mechanics

I

Calculate drag and lift coefficients and essentials of

unsteady flow.

Identify and use suitable data to calculate problems related

to open channel flow and depth energy relationships in open

channel flow

Ability to analyze uniform flow in open channels and

Hydraulic jump phenomenon.

Appreciate the role centrifugal pumps and Impact of Jet to

use water flow energy.

To understand the Hydropower generation and performance

of Hydraulic Turbines

Analyze the various flow profiles from gradually varied flow

and its computations

201005

Architectural

Planning and

Design of

Buildings

To Understand the Town planning & Legal Aspect.

Make use of principles of planning and principles of architectural

Planning.

Analyze the available primary or secondary data and plan different

types of structures considering futuristic need of an area.

Improve the status of existing structures by proposing appropriate

green measures.

Plan effectively various types of buildings according to their utility

with reference to different codes.

Understand and resolve contemporary issues at multi-dimensional

functional levels

201008 Structural

Analysis I

Understand the basic concept of static and kinematic

indeterminacy, slope and deflection of determinate and

indeterminate beams for analysis of structures.

Analyze indeterminate beams structures and frames.

Evaluate determinate and indeterminate trusses and its

application in the field.

Apply influence line diagrams for the analysis of structures

under moving load.

Analyze two and three hinged arches and its application.

Apply plastic analysis for indeterminate steel structures by

10

Subject/

Course

code

Subject/Course


limits state method.

201009 Engineering

Geology

To explain the basic concepts of engineering geology.

To differentiate between the different rock types, their

inherent characteristics and their application in civil

engineering.

To understand physical properties, mechanical properties of

the minerals and their application in civil engineering.

To identify favorable and unfavorable conditions for the

buildings, roads, dam, tunneling etc through the rocks.

To explain mass wasting processes, effects of mass wasting

process on the civil engineering structures and remedial

measures. Interpret geohydrological characters of the rocks

present at the foundations of the dams, percolation tanks,

tunnels.

To understand Seismic activities and its effect on the civil

engineering construction. Identify geological hazards and

presence of ground water.

201007 Concrete

Technology

Understand chemistry, properties, and classification of cement,

fly ash, aggregates and admixtures, and hydration of cement in

concrete.

Prepare and test the fresh concrete.

Test hardened concrete with destructive and nondestructive

testing instruments.

Get acquainted to concrete handling equipments and different

special concrete types.

Design concrete mix of desired grade.

Predict deteriorations in concrete and repair it with appropriate

methods and techniques.

T.E. Civil (2015 course)

Semester - I

Subject/

Course

code

Subject/Course


301001 Hydrology and

water resource

To study of hydrology, precipitation, and stream gauging.

Introduction to Irrigation and study of Water Requirements

11

Subject/

Course

code

Subject/Course


Engineering of Crops

To study of Ground Water Hydrology.

Introduction of Runoff and floods.

To study the Planning of Reservoir.

Study of Water Management ,Water Logging and Drainage

301002

Infrastructure

Engineering and

Construction

Techniques

To Study the Introduction of Infrastructure Engineering and

Railway Engineering.

Detailed Study of Railway Engineering.

To Study the Construction Techniques.

Detailed Study of Tunneling Engineering.

To Detailed Study of Dock & harbours.

To Detailed Study of Construction Equipment.

301003 Structural

Design-I

Design philosophies and behavior of structural steel. Ability

to design of tension members.

Ability to analyze and design of built-up column, lacing and

battening.

Ability to design of uniaxial and biaxial bending, column

bases, slab base, gusseted base.

Ability to Design of laterally supported beams & laterally

unsupported beams.

Ability to design of beam to beam, beam to column

connections and welded plate girder.

Ability to Design of gantry girder and Roof truss.

301004 Structural

Analysis-II

Introduction of indeterminate structures. Application of

beam and frames with and without joint translation by

slope deflection method.

Analyse the sway and non-sway moments on beam and

frame by moment distribution method.

Understand the concept of flexibility method analysis and

application of pin jointed plane trusses, application of

flexibility method to beam and rigid jointed rectangular

portal frames.

Understand the concepts of stiffness method of analysis

and its applications.

Introduction and application to deflection problems of

determinate beam by central difference method, Analyse

the approximate methods of multistoried multi-bay 2-D

rigid jointed frames.

12

Subject/

Course

code

Subject/Course


Introduction of finite element method and Develop shape

functions and stiffness matrices for spring and bar

elements.

301005 Fluid

Mechanics-II

To study the Fluid Flow around Submerged Objects.

Introduction to Open channel flow and Depth-Energy

Relationships in Open Channel Flow.

Uniform flow in open channels and Hydraulic Jump.

Impact of Jet and Centrifugal Pumps

Hydropower generation and Performance of hydraulic

turbines.

Gradually Varied Flow in Open Channels and Gradually

varied flow computations.

Semester - II

Subject/

Course

code

Subject/Course


301007 Advanced

Surveying

To be able to work under various critical condition and able

to use proper method and instrument while surveying. Also

differentiate the geodetic surveying and plane surveying.

To be able to find out three point problem solution for

hydrographic survey. And to know the instruments used to

do survey under water bodies.

To be able to know the advanced technology use in

investigation work under various critical condition. To know

the concepts and components of GIS & RS in surveying.

To be handle the geodetic project and find out correction

less values in geodetic quadrilateral. Also know the types of

error and find out the MPV for observation.

To be able to find out the scale of aerial photograph and

study the aerial photogrammetric. Also to know the

interpretation of aerial photogrammetric and its technique.

To be able to know the correction in trigonometrically

observation and apply for same to find out corrected value

by applying correction. Setting out the major work in civil

engineering such as bridge work, tunnel work etc.

301008 Project Introduction to project management.

13

Subject/

Course

code

Subject/Course


Management

and Engineering

Economics

To study the Project planning and scheduling.

To study the Project Resources and Site Planning.

To study the Project Monitoring and Control.

To study the Project Economics.

Introduction of Project appraisal.

301009 Foundation

Engineering

To study the purpose of soil investigation and various

methods of investigating the properties of soil and also

describing the suitability of soil for particular construction

project.

To be able to obtain the bearing capacity of soil either by

direct method by testing the soil in laboratory or by

correlation using field data.

To know in detail the causes of foundation settlement and

application of this in design of shallow foundation.

To study in detail various types of deep foundation and also

methods of installation with advantages and limitations of

each method.

To know various problems involved with black cotton soil

and various types of foundations that can be adopted to

overcome this problem.

To understand the mechanism of reinforced soil so as to

apply ground improvement technique with respect to

Earthquake Geotechnics.

301010 Structural

Design-II

Differentiate various design philosophies, to design singly &

doubly reinforced beams using

working stress method and the basic knowledge of limit

state philosophy.

Understand the design parameters of limit state method, to

classify the section as UR, OR and balanced, design of

various types of beams and design of various types of One

Way Slabs.

Design various types of Two Way Slabs and Design of

Staircases.

Design of various types of beams for flexure.

Design of beams for shear, bond and torsion And to design

continuous beams using concept of redistribution of

moments.

Design of short columns for axial loads, uniaxial & biaxial

14

Subject/

Course

code

Subject/Course


bending and to design isolated column footing.

301011 Environmental

Engineering-I

Learner will be able to understand the causes and effects of

noise pollution and measurement of equivalent noise level

and control methods for noise pollution. Learner will be

able to understand the causes and effects of air pollution

and control methods for air pollution and to study the

municipal solid waste management.

Learner will be able to understand the design of water

supply network and water demand and forecasting of

population. Learner will be able to analyze the

characteristics of water.

Learner will be able to understand the process of water

treatment and aeration and sedimentation. Learner will be

able to design the aeration unit and sedimentation unit for

water treatment plant for given population.

Learner will be able to understand the process of

Coagulation and flocculation with design of coagulation

and flocculation unit for water treatment plant. Learner will

be able to understand the process of filtration and to design

filter for water treatment plant.

Learner will be able to understand the various methods of

disinfection, water softening and demineralization and

Fluoridation and defluoridation.

Learner will be able to understand design of water

distribution system. Learner will be able to understand the

various methods of rainwater harvesting and design of

rainwater harvesting system.

B.E. Civil (2015 course)

Semester - I

Subject/Course

code

Subject/Course


401 001 Environmental

Engineering II

Calculate sewage quantity, to study characteristics of

sewage and stream sanitation.

To understand sewage treatment.

Understand theory & design of secondary treatment

15

Subject/Course

code

Subject/Course


units, activated sludge process, Trickling filter.

Study Oxidation pond and Aerated lagoons.

Study onsite Sanitation and Introduction to Package

Sewage Treatment Plant and Anaerobic digester.

Understand Industrial waste water treatment.

401 002 Transportation

Engineering

Describe the basic components of transport

system & infrastructure, their role,

importance and characteristics

Design transport system components in particular

geometric design of roads and

intersections

Apply engineering principles to identify and investigate

traffic problem s and evaluate suitable solutions

Understand the various highway materials and their

suitability under different conditions

Get acquainted to various traffic characteristics and use

the data for road design.

To understand the construction and operation of design

pavement

401 003

Structural

Design and

Drawing III

To discuss basic definitions, types, & system of

prestressed concrete & analyze a select appropriate

problem-solving strategies and calculate related

parameter.

To detailed design problem related to design of

prestressed concrete structures.

To undertake design of building frames subjected to

seismic loading as per seismic coefficient method.

Ability to analyze & Design of RCC Retaining

structures at various soil conditions.

Ability to analyze & Design of Different Types of

Combined Footing.

To undertake design problems on design of liquid

retaining structures.

401 004

Elective-I

Architecture

and Town

Planning

To study the Principles and elements of Architectural

Composition.

To study the Urban renewal for quality of life and

livability.

To study the Goals, Objectives and level of planning.

To discuss use the Traffic transportation systems.

16

Subject/Course

code

Subject/Course


Legislative mechanism for preparation of DP.

Application of GIS, GPS, remote sensing in planning.

401 005 Elective – II

TQM & MIS

Quality in Construction.

Introduction to Management Information systems

(MIS).

To study the Defects & it’s classification in

construction. Measures to prevent and rectify defects.

Process based approach for achieving TQM. Study of

ISO 9001 principles.

To study the Management Control.

Modern tools in TQM Implementation

Semester - II

Subject/Course

code

Subject/Course


401 007

Dams and

Hydraulic

Structures

Understand the classification and Objectives of dam

safety and instrumentation.

Understand the components, forces and design of

different type of dams.

Understand the different parts of dam.

Understand the analysis of earthen dam and diversion

head networks.

Understand the introduction of canal and canal

structures.

Introduction cross drainage work and River training

structures.

401 008

Quantity

Surveying,

Contracts and

Tenders

Introduction and Approximate Estimates.

Taking out quantities & Detailed estimate up to plinth.

Detailed Estimation for super structure & Valuation.

To study the Specifications and Rate Analysis.

Execution of Works and Tendering.

Contracts and Arbitration

401 009

Elective-III

Air Pollution

and control

Ability to study the Meteorological aspects.

To study the Ambient Air sampling and analysis.

Introduction and study of Indoor air pollution.

Control of air pollution.

Planning of Land use.

17

Subject/Course

code

Subject/Course


401 010

Elective -IV

Construction

Management

Overview of construction sector.

Parametric study of Construction scheduling, work

study and work measurement

Study of Labor laws and financial aspects of

construction projects.

Elements of risk management and value engineering.

Introduction to artificial intelligence technique.

18

Course outcomes (COs) Computer Engineering

S.E. Computer (2015 course)

Semester - I

Subject/

Course

code

Subject/Course


210241

Discrete

Mathematics

Understand the basic principles of set theory, operations in

sets and propositional logic theory.

Demonstrate an understanding of relations and functions and

be able to determine their properties.

Apply counting principles to determine permutations and

combinations.

Demonstrate different traversal methods for trees and

graphs.

Use effectively algebraic techniques to analyze basic

discrete structures and algorithms.

Analyze and synthesize the real-world problems using

discrete mathematics.

210242

Digital

Electronics

and Logic

Design

Understand and apply the knowledge of basic electronics to

construct combinational digital circuits as per the

specifications

Design Sequential digital circuits as per the specifications.

Understanding and describe the minimum systems using ASM

and VHDL.

Program the PLA and PAL’s to obtain various combinational

circuits.

Apply the knowledge to select the logic families IC packages

as per the design specifications.

Describe and demonstrate the minimum embedded system for

simple real-world application.

210243

Data Structures

and Algorithms

To understand clear approach of program design, fundamental

aspects of algorithm.

To understand linear data structure with sequential

organization & its implementation

To analyze limitation of static data structure & need of

dynamic data structure.

To design all the aspects of stack & its variants.

19

Subject/

Course

code

Subject/Course


To realize different types of queue & its implementation.

To analyze & understood various searching & sorting

algorithm.

210244

Computer

Organization

and Architecture

Demonstrate different performance parameters of computers

and evolution of computers with different generations of

computers.

Demonstrate the different types and levels of memories and

their organization.

Evaluate various design of I/O modules, their types along with

interrupt controller IC and DMA controller

Understand the instruction set and its elements.

Analyze how computer processor has progressed to encounter

the requirements of multiprocessing system

Understand important and basic components of a control unit

with the hardwired control and microprogrammed control

210245

Object Oriented

Programming

Analyze the strengths of object oriented programming

Evaluate and understand how to model real world scenario

using class.

Demonstrate the knowledge for solving computational

problems using basic constructs like control structures,

array, and strings along with virtual classes.

Design and apply OOP principles like templates and

exception handling for effective programming.

Develop programming application using object-oriented

concept of File handling.

Illustrate the knowledge of STL through applications.

Semester - II

Subject/

Course

code

Subject/Course


207003 Engineering

Mathematics III

Solve higher order linear differential equation using

appropriate techniques for modeling and analyzing electrical

circuits.

Solve problems related to Fourier transform, Z-Transform

and applications to Signal and Image processing.

20

Subject/

Course

code

Subject/Course



analysis and probability theory for analysis and prediction of

a given data as applied to machine intelligence.

Perform vector differentiation and integration to analyze the

vector fields and apply to compute line, surface and volume

integrals.

Analyze conformal mappings, transformations and perform

contour integration of complex functions required in Image

processing, Digital filters and Computer graphics

210251 Computer

Graphics

Apply mathematics and logic to develop Computer programs

for elementary Graphic operations

Develop scientific and strategic approach to solve complex

problems in the Domain of Computer Graphics

Apply mathematics and logic to develop 2D and 3D

Transformation in the Domain of Computer graphics

Develop the competency to understand the concepts related

to Computer Vision and Virtual reality


to illumination Models and Shading algorithms

Apply the logic to develop animation and gaming programs

210252 Advanced Data

Structures

To analyze and use tree as a flexible data structure for solving

the problems.

To design the algorithms to solve the programming problems

using graphs.

To analyze and implement the hashing technique problems

and dictionaries.

To analyze the algorithmic solutions for resource requirements

and optimization of search trees.

To use appropriate modern tools to understand and analyze

the functionalities of indexing and multiway trees.

To use various file organizations techniques and their

application-specific suitability.

210253 Microprocessor

To apply the assembly language programming to develop

small real life embedded application.

To understand the architecture of the advanced processor

thoroughly to use the resources for programming

21

Subject/

Course

code

Subject/Course


To understand the higher processor architectures descended

from 80386 architecture

understand debugging and testing techniques confined to

virtual 8086

To understand debugging and testing techniques confined to

80386 DX

210254

Principles of

Programming

Languages

To analyze the strengths and weaknesses of programming

languages for effective and efficient program development.

To inculcate the principles underlying the programming

languages enabling to learn new programming languages.

To grasp the concept of structuring, grouping of modules by

understanding the different programming paradigms.

Develop the understanding of object-oriented based

programming languages.

Ability to utilize the OOP fundamental methods like

inheritance, encapsulation and polymorphism in

development of JAVA programs.

To use the programming paradigms effectively in JAVA

application development.

T.E. Computer (2015 course)

Semester - I

Subject/

Course

code

Subject/Course


310241 Theory of

Computation

Prove the equivalence of languages described by finite state

machines.

Define languages by abstract, recursive definitions and by

regular expressions.

Apply rigorously formal mathematical methods to prove

properties of languages, grammars and automata.

Design deterministic Turing machine for all inputs and all

22

Subject/

Course

code

Subject/Course


outputs.

Prove the equivalence of languages described by pushdown

automata, context free grammars.

Subdivide problem space based on input subdivision using

constraints and apply Linguistic theory.

310242

Database

Management

Systems

(DBMS)

Students will be able to construct E-R Model for given

requirements and convert the same into database tables.

Students can illustrate database techniques such as SQL &

PL/SQL.

Students will be able to design modern database techniques

such as NOSQL.

Students will be able to understand transaction Management

in relational database System.

Students will be able to describe different database

architecture and analyses the use of appropriate architecture

in real time environment.

Students will be able to use advanced database Programming

concepts Big Data – HADOOP

310243

Software

Engineering &

Project

Management

Decide on a process model for developing a software project

Understand user requirements and design a software

requirements specification document.

Apply quality attributes in software development life cycle.

Understand the fundamental principles of Software Project

management & acquire good knowledge of responsibilities

of project manager

Illustrate different methods and techniques used for project

management and will be able to plan, schedule and execute a

project considering the risk management.

Design test cases for testing a software system.

310244

Information

Systems &

Engineering

Economics

Understand the need, usage and importance of an

Information System to an organization.

Understand the activities that are undertaken while

managing, designing, planning, implementation and

deployment of computerized information system in an

organization.

Demonstrate different methodologies for software

23

Subject/

Course

code

Subject/Course


development and project management

Outline the past history, present position and expected

performance of a company engaged in engineering practice

or in the computer industry.

Perform and evaluate present worth, future worth and annual

worth analyses on one of more economic alternatives

Evaluate benefit/cost, life cycle and breakeven analyses on

one or more economic alternatives

310245 Computer

Networks (CN)

Student will be able to understand the requirements for a

given organizational structure to select the most appropriate

networking architecture, topologies, transmission mediums,

and Technologies.

Student will be able to understand design issues, flow

control and error control.

Student will be able to analyze data flow between TCP/IP

models using Application, Transport and Network Layer

Protocols

Student will be able to understand applications of Computer

Network capabilities, selection and usage for various sectors

of user community.

Student will be able to understand the Client-Server

architectures and prototypes by the means of correct

standards and technology.

Student will be able to analyze different routing and

switching algorithms

Semester - II

Subject/

Course

code

Subject/Course


310250

Design &

Analysis of

Algorithms

Learn the fundamentals of Design and Analysis of

Algorithm.

Formulate the problem.

Analyze the asymptotic performance of algorithms.

24

Subject/

Course

code

Subject/Course


Decide and apply algorithmic strategies to solve given

problem.

Find optimal solution by applying various methods.

Differentiate deterministic and non-deterministic algorithms

and Categorize algorithms as NP- Hard, NP-complete.

310251

Systems

Programming &

Operating

System (SP &

OS)

Student will be able to understand basics of System

Programming.

Student will be able to learn and understand data structures

used in design of system software.

Student will be able to learn and understand basics of

compilers and tools.

Student will be able to understand functions of operating

system.

Student will be able to learn and understand process.

Student will be able to learn and understand resource and

memory management

310252

Embedded

Systems &

Internet of

Things

(ES&IoT)

Implement an architectural design for IoT for specified

requirement.

Solve the given societal challenge using IoT.

Choose between available technologies and devices for

stated IoT challenge.

Know a difference between automation and IoT.

Differentiate between Web of Things (WoT) and Internet of

Things (IoT).

Study of cloud offerings for IoT

310253

Software

Modeling and

Design

Analyze the problem statement (SRS) and choose proper

design technique for designing web-based/ desktop

application

Design and analyze an application using UML modeling as

fundamental tool.

Decide and apply appropriate modern tool for Dynamic

modeling & designing.

Apply Architectural design for real time application.

Apply design patterns to understand reusability in OO

design.

Decide and apply appropriate modern testing tool for testing

web-based/desktop application

25

Subject/

Course

code

Subject/Course


310254 Web

Technology

Analyze given assignment to select sustainable web

development design methodology

Develop web based application using suitable client side

web technologies.

Develop web based application using suitable server side

web technologies

Develop client side frameworks

Develop server side frameworks

Develop solution to complex problems using appropriate

method, web services and content management

B.E. Computer (2015 course)

Semester - I

Subject/

Course

code

Subject/Course


410241

High

Performance

Computing

Describe different parallel architectures, inter-connect

networks, programming models

Develop an efficient parallel algorithm to solve given

problem

Analyze and measure performance of modern parallel

computing systems

Build the logic to parallelize the programming task

To present test cases to solve problems for multi-core or

distributed, concurrent/Parallel environments

To understand communication models of parallel systems.

410242

Artificial

Intelligence and

Robotics

Ability to apply several powerful search techniques for

automatically solving complex problems

Ability to Identify and apply suitable Intelligent agents for

various AI applications by Decomposition technique

Ability to demonstrate working knowledge of reasoning in

the presence of incomplete and/or uncertain information.

Ability to apply knowledge of Artificial neural network to

solve problems in real world

26

Subject/

Course

code

Subject/Course


Ability to describe the theory of Robotics and robot system

controls

Ability to design robots and its applications in practice

410243 Data Analytics

Students will be able to understand big data primitives and

apply different mathematical models for big data.

Students will be able to present a survey on applications for

Business Analytic and Intelligence.

Students will be able to provide problem solutions for multi-

core or distributed, concurrent/Parallel environments.

Students will be able to Describe and demonstrate use of

classification and regression.

Students will be able to understand needs, challenges and

techniques for big data visualization

Students will be able to learn different tools for big data

analytics.

410244

Elective - I

(Data Mining

and

Warehousing)

To present survey on different learning, classification and

data mining foundations.

To write programs and methods for data mining

applications.

To solve problems for multi-core or distributed,

concurrent/Parallel environments

To describe different data mining methods.

To learn different technique of Text & Web Mining

To learn advanced techniques for big data mining

410245

Elective- II

(Software

Testing and

Quality

Assurance)

Define and describe fundamental concept in software testing

such as manual testing, automation testing and software

quality assurance.

Design and develop project test plan, design test cases, test

data and conduct test operation.

Describe fundamental concept of automation testing.

Apply selenium automation tool for various software testing

for testing software.

Understand different approaches of quality management,

assurance and apply quality standards to software testing.

Apply and analyze effectiveness Software Quality Tools.

27

Semester - II

Subject/

Course

code

Subject/Course


410250 Machine

Learning

Distinguish different learning based applications.

Apply different preprocessing methods to prepare training

data set for machine learning.

Implement different learning models and machine learning

algorithms.

Use machine learning methods for multivariate data analysis

in various scientific fields.

Design and implement supervised and unsupervised machine

learning algorithm.

Choose and apply appropriate Machine Learning Techniques

for analysis, forecasting, categorization and clustering of the

data.

410251 Information and

Cyber Security

Gauge the security protections and limitations provided by

today's technology.

Use basic cryptographic techniques in application

development

Analyze to the different cryptographic key management

techniques.

Exposure to network security protocols and cybercrime and

Information security

Analyze threats in order to protect or defend it in cyberspace

from cyber-attacks.

Build appropriate security solutions against cyber-attacks

410252 Elective - III

(Compilers)

Design and implement a lexical analyzer and a syntax

analyzer

Specify appropriate translations to generate intermediate

code for the given programming language construct

Compare and contrast different storage management

schemes

Identify sources for code optimization

To understand issues in code generation and optimization

To understand need of optimization

410253

Elective - IV

(Business

Intelligence)

Apply basic, intermediate and advanced techniques to

analysis the data.

Analyzed the output generated by the process of business

28

Subject/

Course

code

Subject/Course


intelligence.

Explore the hidden pattern in the data.

Optimize the mining process by choosing best business

intelligence techniques.

Communicate effectively in a variety of modes and contexts.

Design tested and effective advanced analytics models and

simulations for decision making.

29

Course outcomes (COs) Electrical Engineering

S.E. Electrical (2015 course)

Semester - I

Subject/

Course

code

Subject/Course


203141

Power

Generation

Technologies

Identify operations of thermal power plant with all

accessories and cycles

Be aware of the principle of operation, components, layout,

location, environmental and social issues of nuclear, diesel

and gas power plant

Identify and demonstrate the components of hydro power

plant and calculation of turbine required based on catchment

area

Find the importance of wind-based energy generation along

with its design, analysis and comparison

Apply solar energy in thermal and electrical power

generation considering energy crisis, environmental and

social benefits.

Understand the operation of electrical energy generation

using biomass, tidal, geothermal, hydel plants, fuel cell and

interconnection with grid

207006 Engineering

Mathematics III


appropriate techniques for modelling and analysing

electrical circuits.

Solve problems related to Laplace transform and

applications to Signal processing and Control systems

Solve problems related to Fourier transform and Z-

Transform and applications to Signal processing and Control

systems


vector fields and apply to Electro-Magnetic fields.




contour integration of complex functions in the study of

electrostatics and signal processing.

30

Subject/

Course

code

Subject/Course


203142 Material Science

Student will be able to Categorize and classify different

materials from electrical engineering application point of

view

Student will be able to Explain and summarize various

properties and characteristics of different classes of

materials

Student will be able to choose material for application in

various electrical equipment

Student will be able to explain the features classification and

application of conducting material

Student will able to explain and describe knowledge of

nanotechnology, batteries and solar cell material

Student will be able to test different classes of material as

per IS

203143

Analog and

Digital

Electronics

Understand conversion of number system, perform binary

arithmetic and reduce Boolean expressions by K- Map.

Demonstrate basics of various types of Flip flops, design

registers and counter.

Ability to analyze parameter of Op-amp and its applications.

Apply the knowledge of Op-amp as wave form generators,

filters, voltage regulators and know the working of IC555

timer

Ability to use BJT as amplifier with various configurations.

Understand the working of diode and precision rectifier.

203144

Electrical

Measurements

and

Instrumentation

Understand various characteristics of measuring instruments,

their classification and range extension technique.

Classify resistance, apply measurement techniques for

measurement of resistance, inductance.

Explain construction, working principle and use of

dynamometer type wattmeter for measurement of power

under balance and unbalance condition.

Explain Construction, working principle of 1-phase and 3-

phase induction, static energy meter and calibration

procedures.

Use of CRO for measurement of various electrical

parameters, importance of transducers, their classification,

selection criterion and various applications.

Study & Measurement of various physical parameters using

31

Subject/

Course

code

Subject/Course


transducers.

Semester - II

Subject/

Course

code

Subject/Course


203145 Power System I

Recognize different patterns of load curve, calculate

different factors associated with it and tariff structure for LT

and HT consumers

Aware of features, ratings, application of different electrical

equipment in power station and selection of overhead line

insulators.

Analyse and apply the knowledge of electrical and

mechanical design of transmission lines

Identify and analyse the inductance and resistance of

transmission lines

Impart the knowledge of capacitors - HT and LT capacitor

installation

Identify and analyses the performance of transmission lines

203146 Electrical

Machines I

Understand the working of the transformer and apply energy

conversion principle to transformer.

Analyse the performance of different types of single phase

and three phase transformers.

Apply the energy conversion principle to different DC

machine and study their operating principle.

Do the performance analysis of different DC motors and

suggest the different method of speed control and starting

method of DC motor. And suggest the suitable application.

Apply the energy conversion principle to three phase

induction motor and study their operating principle.

Do the performance analysis of three phase induction motor

and suggest the different method of speed control and

starting method of three phase induction motor. And suggest

the suitable application

203147 Network Analysis Recall basics for network theory

32

Subject/

Course

code

Subject/Course


Analyse different electrical networks with the help of

network theorems

Examine transient behaviour of electrical networks in Time

Domain

Apply knowledge of Laplace Transform to study the

transient response of electrical networks

Understands various parameters of two port networks along

with network functions

Apply knowledge of network theory for designing special

circuits like Filters

203148

Numerical

Methods and

Computer

Programming

Develop algorithms and implement programs using C

language for various numerical methods.

Demonstrate types of errors in computation and their causes

of occurrence.

Identify various types of equations and apply appropriate

numerical method to solve different equations.

Apply different numerical methods for interpolation,

differentiation and numerical integration.

Apply and compare various numerical methods to solve first

and second order ODE.

Apply and compare various numerical methods to solve

linear simultaneous equations.

203149

Fundamentals of

Microcontroller

and Applications

Understand the architecture and features of microcontroller

and also how microcontroller is different from

microprocessor

Demonstrate programming proficiency using the various

addressing modes and all types of instructions of the

microcontroller.

Foster ability to write and execute programs for

microcontroller using the stack, program counter, internal /

external memory and timers.

Understand different types of interrupt and how interrupts

are serviced and also analyse the data transfer information

through serial communication using RS232.

Understand microcontroller development tools. Design

electrical circuitry to the Microcontroller I/O ports in order

to interface with external devices.

Write assembly language programs and download the

33

Subject/

Course

code

Subject/Course


machine code that will provide solutions real-world control

problems such as fluid level control, temperature control,

and batch processes.

T.E. Electrical (2015 course)

Semester - I

Subject/

Course

code

Subject/Course


311121

Industrial and

Technology

Management

Analyze the different types of business organization and to

understand the fundamentals of economics and management.

Understand the importance of technology management in

National economy, its different types and critical factors

involved in technology management.

Ability to analyze the quality in terms of design, process &

control and different types of tools used to achieve the

quality.

Ability to understand the market demand by doing survey,

research & online data and apply the knowledge for proper

financial management.

Ability to understand the process involved in recruitment,

selection, training of human resource development,

motivation theories and performance management.

Understand the qualities needed to become an entrepreneur

along with the knowledge of Intellectual Property Rights and

criteria for securing Patents.

303141

Advance

Microcontroller

and its

Applications

Understand architecture of PIC18F458 microcontroller, its

instructions

Addressing Modes of PIC, developing and debugging

program in assembly language & Use of an IDE for

simulating the functionalities of PIC microcontroller and its

use for software and hardware development.

Develop and debug program in C language & Use of an IDE

for simulating the functionalities of PIC microcontroller and

34

Subject/

Course

code

Subject/Course


its use for software and hardware development

To understand operation of timers & it’s different modes

with applications.

To understand different interrupts of PIC18F458.

To understand interfacing of different peripherals with

PIC18F458 & effective utilization of advanced features of

PIC18F458 Microcontroller.

303142 Electrical

Machines II

Explain construction & working principle of three phase

synchronous machines.

Estimate regulation of alternator by direct and indirect

methods.

Demonstrate operation of synchronous motor at constant

load and variable excitation & constant excitation and

variable load.

Explain Speed control methods of three phase induction

motor.

Plot circle diagram of ac series motor

Obtain equivalent circuit of single phase induction motor by

performing no load & blocked rotor test.

303143 Power

Electronics

Develop the characteristics of different power electronic

switching devices

Understand transistor-based switching devices and DC-DC

converter

Analyse the performance of single-phase AC-DC converters

Apply the concept of Three phase AC-DC converter and AC

voltage regulators

Understand transistor based single phase DC-AC converter

with PWM techniques.

Apply the concept of transistor based Three phase DC-AC

converter

303144

Electrical

Installation,

Maintenance

and Testing

Classify distribution systems, its types and substations

Design of different earthing systems for residential and

industrial premises

Appreciate and evaluate various maintenance methods /

techniques

Select methods of condition monitoring and testing of

various Electrical equipment

Estimate and costing of residential and industrial premises

35

Subject/

Course

code

Subject/Course


Apply electrical accidents and safety rules during

maintenance

Semester - II

Subject/

Course

code

Subject/Course


303146 Power System II

Evaluate power flow in power transmission networks and

apply power flow results to solve simple planning problems

Solve problems involving modelling, design and

performance evaluation of HVDC and EHVAC power

transmission lines

Understand the per-unit system and develop a program for

formation of the bus admittance matrix

Calculate currents and voltages in a faulted power system

under both symmetrical and asymmetrical faults, and relate

fault currents to circuit breaker ratings

Understand Symmetrical components and perform

unsymmetrical fault and fault contingency calculations

To understand the importance of Transmission power

through HVDC

303147 Control System

I

Study basic concepts of control systems such as transfer

function modelling and obtain the TF using block diagram

and signal flow graph.

To study time response of first order and second order

systems and analyse them using time domain techniques.

To understand the basic concept of stability and the methods

to examine stability of a control system.

To analyse the system stability using bode plot technique

Stability analysis of control system using frequency domain

analysis.

Study basic PID controller along with its design and tuning.

Study of basic control system components.

303148

Utilization of

Electrical

Energy

Get knowledge of principle of electric heating, welding and

its applications. Design simple resistance furnaces.

Understand the different electrochemical process and their

36

Subject/

Course

code

Subject/Course


application in current market also get the knowledge about

refrigeration and air conditioning system.

Understand different illumination schemes and lightning

sources, also design simple & energy efficient residential

illumination schemes.

Get knowledge about the electric traction system and

different accessories of track electrification.

Calculate tractive effort, power, acceleration and velocity of

traction.

Get knowledge of electric braking methods, control of

traction motors, train lighting and signaling system.

303149

Design of

Electrical

Machines

Calculation of heating and cooling time constant of machine

to know the temperature withstand limit and to study the

construction of core and winding of transformer.

Analysis and Calculation of main dimensions and Design of

single phase and three phase transformers

Analysis of the parameters of transformer and find its

magnitude

Analysis and Calculation of Design of AC winding for

induction motor and calculate of effective values of specific

electrical and magnetic loadings for design point-of-view of

IM.

Analysis and Calculation of main dimensions of three phase

Induction motor.

Analysis and Determine parameters of three phase Induction

motor.

303150

Energy Audit

and

Management

To get the knowledge of BEE Energy Policies Electricity

Act

Use various energy measurement and audit instrument

Carry out preliminary energy audit of various sectors

Enlist energy conservation and demand side measures for

electrical thermal and utility systems ratings

Calculate energy consumption and saving options with

economic feasibility

Solve simple problem on cost benefit analysis

37

B.E. Electrical (2015 course)

Semester - I

Subject/

Course

code

Subject/Course


403141

Power System

Operation and

Control

Identify and analyze the dynamics of power system and

suggest the means to improve the stability

Suggest the appropriate method of reactive power

generation and control

Ability to realize the modern power system with FACTS

devices

Analyse the generation-load balance in real time operation

and its effect on frequency and develop automatic control

strategies with mathematical relations.

Formulate objective functions or optimization tasks such as

unit commitment and economic load dispatch and get

solution using computational techniques.

Assess the generation capacity and stability of the system

under various load conditions. Apply the knowledge of

reliability and planning concepts to the practical and real

time systems.

403142

PLC and

SCADA

Applications

Develop block diagram of PLC and explain the working.

Classify input and output interfacing devices with PLC.

Develop architecture of SCADA and explain the importance

of SCADA in critical infrastructure

Execute, debug and test the programs developed for digital

and analog operations

Describe various SCADA protocols along with their

architecture.

Observe development of various industrial applications

using PLC and SCADA

403143 Elective- I

Power Quality

Recognize fundamentals of power quality and IEEE

standards related to it.

Reproduce causes of voltage sag and estimate magnitude of

voltage sag

Apply techniques to mitigate Power Quality disturbance and

transients

Carry out harmonic analysis and calculate total harmonic

distortion

Apply techniques to mitigate harmonics and calculate

38

Subject/

Course

code

Subject/Course


parameters for passive harmonic filter

Compute power quality parameters using various measuring

equipment’s.

403144

Elective- II

Electric and

Hybrid Vehicles

Understand history, Social and environmental importance of

Hybrid and Electric vehicles.

Describe the performance and selection of energy storage

systems and analyse battery management system.

Distinguish between the performance and architecture of

various drive trains.

Describe the different Instrumentation and Control used for

electric vehicles

Differentiate between Vehicle to Home, Vehicle to Vehicle

Differentiate between Vehicle to Grid energy systems

concepts

403145 Control System

II

Recognize the importance of digital control system.

Familiarize with pulse transfer function.

Analyze digital controllers.

Present system in state space format.

Solve state equation.

Design observer for system.

Semester - II

Subject/

Course

code

Subject/Course


403147 Switchgear and

Protection

Classify and describe different type of relays such as

over current relay, reverse power relay, directional

over current relay, Differential relay, Distance relay,

Static relay and numerical relay.

Derive expression for restriking voltage and RRRV in

circuit breaker

Explain construction and working of different high

voltage circuit breakers such as ABCB, SF6 CB, and

VCB.

Explain construction and working of Static relay and

numerical relay and protection schemes of Induction

Motor.

39

Subject/

Course

code

Subject/Course


Describe various protection schemes used for

transformer, alternator and busbar

Describe transmission line protection schemes.

403148 Power Electronic

Controlled Drives

Examine the concept of drive and behavior of motor

load system.

Analyze the operation of the converter, chopper fed

dc drive.

Analyze the operation of classical induction motor

drives.

Analyze the operation of modern induction motor

drives.

Design the current and speed controllers for a closed

loop solid-state DC motor drive

Select the drives for any particular application

403149

Elective – III

High Voltage

Engineering

Reproduce the concept in breadth with various

concept of breakdown phenomenon of gaseous

material along with various causes of overvoltage and

protection from them

Reproduce the concept in breadth with various

concept of breakdown phenomenon of solid and

liquid material along with various causes of

overvoltage and protection from them

Describe the lightening phenomenon, natural causes

of overvoltage in details with formation of charge in

clouds

List and reproduce various methods of generation and

measurement of DC AC and impulse high voltage

Demonstrate an ability to carry various D.C. A.C. and

impulse high voltage

Apply safety measures, earthing shielding for layout

of HV apparatus required in high voltage laboratory

403150 Elective – IV

Smart Grid

Understand the background for Smart Grid and have

knowledge about important terminology

To understand Phase Measurement Unit, Smart

Substations, Plug in Hybrid Electric Vehicles and

Smart storage technologies

Know about challenges and possibilities related to

smart meters

40

Subject/

Course

code

Subject/Course


Have knowledge about technology for microgrids and

integration of renewable energy and energy storage

To get acquainted with the smart technologies and

power quality issues in smart grids

Know the communication technologies, standards and

protocols for smart grid applications

41

Course outcomes (COs) Information Technology

S.E. IT (2015 course)

Semester - I

Subject/

Course

code

Subject/Course


214441 Discrete

Structures Perform combinatorial analysis to solve problems based on

permutations & Combinations.

Use set to formulate a problem and solve it.

Analyze relations among object of sets and functions.

Use graph theory to formulate the problems and solve them

Use tree to formulate the problems and solve them

Develop the techniques using algebraic structures, groups

and rings.

214442 Computer

Organization

and Architecture

Solve problems based on computer arithmetic.

Explain processor structure & its functions.

Obtain knowledge about micro-programming of a processor.

Understand concepts related to memory & IO organization.

Acquire knowledge about instruction level parallelism &

parallel organization of multiprocessors & multi core

systems.

Analyze how computer processor has progressed to

encounter the requirements of multiprocessing systems.

214443 Digital

Electronics and

Logic Design

Spectacle an awareness and apply knowledge of number

systems, codes, Boolean algebra and use necessary A.C, D.C

Loading characteristics as well as functioning while

designing with logic gates.

Use logic function representation for simplification with K-

Maps and analyze as well as design Combinational logic

circuits using SSI & MSI chips.

Analyze Sequential circuits like Flip-Flops (Truth Table,

Excitation table), their conversion & design the applications.

Student Identify the Digital Circuits, Input/Outputs to

replace by PLDs.

42

Subject/

Course

code

Subject/Course


Use VHDL programming technique with different modeling

styles for any digital circuits.

Design simple but practically useful digital circuits using

digital design techniques learnt in the subject.

214444 Fundamental of

Data Structures Apply appropriate constructs of C language, coding

standards for application development.

Use dynamic memory allocation concepts and file handling

in various application developments.

Perform basic analysis of algorithms with respect to time

and space complexity.

Select appropriate searching and/or sorting techniques in the


Select and use appropriate linear data structures for problem

solving and programming.

Use dynamic data structure for algorithmic foundations for

solving problems and programming.

214445 Problem Solving

and Object-

Oriented

Programming

Develop algorithms for solving problems by using modular

programming concepts.

Abstract data and entities from the problem domain, build

object models and design software solutions using object –

oriented principles and strategies.

Discover, explore and apply tools and best practices in

object-oriented programming.

Develop programs that appropriately utilize key object-

oriented concepts.

Create a data base using files.

Develop programs for Managing Console I/O Operations.

Semester - II

Subject/

Course

code

Subject/Course


43

Subject/

Course

code

Subject/Course


207003 Engineering

Mathematics -III


appropriate techniques for modeling and analyzing


Solve problems related to Fourier transform, Z-Transform

and applications to Signal and Image processing.


analysis and probability theory for analysis and prediction

of a given data as applied to machine intelligence.

Perform vector differentiation and integration to analyze

the vector fields and apply to compute line, surface and

volume integrals.


contour integration of complex functions required in Image

processing, Digital filters.


contour integration of complex functions required in

computer graphics.

214450 Computer

Graphics

Apply mathematics and logic to develop Computer

programs for elementary graphic operations.

Develop scientific and strategic approach to solve complex

problems in the domain of Computer Graphics.


to Computer Vision and Virtual reality.

Apply the logic to develop animation and gaming programs

To understand the foundations of computer graphics.

To understand the comprehension of windows, clipping

and view-ports object representation in relation to images

displayed on screen.

214451

Processor

Architecture and

Interfacing

Students will learn architectural details of 80386

microprocessor.

Students will be able to explain memory management and

multitasking of 80386 microprocessor.

Students will realize the advantages of efficient utilization

44

Subject/

Course

code

Subject/Course


of memory and execution of programs larger than

memory size.

Students will understand architecture and memory

organization of 8051microcontroller.

Students will be able to explain timers and interrupts of 8051

microcontroller and its interfacing with I/O devices.

Students will familiar with the working of various

interfacing of controllers with devices systems.

214452 Data Structures

& Files

Be familiar with the use of data structures and use linear and

nonlinear data structures like Stack, Queue and Linked List.

Understand different advanced abstract data type (ADT) and

data structures and their implementations.

Understand and apply various types’ of methods for Tree

traversals and Graph traversals.

Choose the appropriate data structure and algorithm design

method for a specified application like symbol tables.

Use different kinds of data structures which are suited to

different kinds of applications, and some are highly

specialized to specific tasks. For example, AVL tree, B-

trees, B+ tree are particularly well-suited for implementation

of databases.

Understand the fundamental concepts of file processing

operations and storage structures.

214453

Foundations of

Communication

and Computer

Network

Understand data/signal transmission over communication

media

Recognize usage of Amplitude and Angle Modulation

modulation techniques.

Recognize usage of Pulse and Digital Modulation techniques

in communication.

Analyze various spread spectrum and multiplexing

techniques.

Understand error correction and detection techniques.

Acquaint with transmission media and their standards

45

T.E. IT (2015 course)

Semester - I

Subject/

Course

code

Subject/Course


314441 Theory of

Computation

To construct finite state machines to solve problems in

computing.

To write mathematical expressions for the formal languages.

To apply well defined rules for syntax verification.

To construct and analyze Push Down, Post and Turing

Machine for formal languages.

To express the understanding of the decidability and

decidability problems.

To express the understanding of computational complexity.

314442

Database

Management

Systems

To define basic functions of DBMS & RDBMS.

To analyze database models & entity relationship models.

To design and implement a database schema for a given

problem-domain.

To populate and query a database using SQL DML/DDL

commands.

Do Programming in PL/SQL including stored procedures,

stored functions, cursors and packages.

To appreciate the impact of analytics and big data on the

information industry and the external ecosystem for

analytical and data services.

314443

Software

Engineering

&Project

Management

Ability to identify unique features of various software application

domains and classify software applications.

Ability to analyze software requirements by applying various

modeling techniques

Ability to choose and apply appropriate lifecycle model of

software development.

Ability to describe principles of agile development, discuss the

SCRUM process and distinguish agile process model from other

process models.

Ability to understand IT project management through life cycle

of the project and future trends in IT Project Management.

Ability to list and classify CASE tools and discuss recent trends

and research in software engineering

46

Subject/

Course

code

Subject/Course


314444 Operating

System

Fundamental understanding of the role of Operating Systems.

To understand the concept of a process and thread.

To apply the cons of process/thread scheduling.

To apply the concept of process synchronization, mutual

exclusion and the deadlock.

To realize the concept of I/O management and File system.

To understand the various memory management techniques

314445

Human-

Computer

Interaction

To explain importance of HCI study and principles of user-

centered design (UCD) approach.

To develop understanding of human factors in HCI design.

To develop understanding of models, paradigms and context

of interactions.

To design effective user-interfaces following a structured

and organized UCD process.

To evaluate usability of a user-interface design.

To evaluate usability of a user-interface design.

Semester - II

Subject/

Course

code

Subject/Course


314450

Computer

Network

Technology

To know Responsibilities, services offered and protocol used

at each layer of network.

To understand different addressing techniques used in

network.

To know the difference between different types of network.

To know the different wireless technologies and IEEE

standards.

To use and apply the standards and protocols learned, for


To understand and explore recent trends in network domain.

314451 Systems

Programming

To learn independently modern software development tools

and creates novel solutions for language processing

applications.

To design and implement assemblers and macro processors

To use tool LEX for generation of Lexical Analyze

To use YACC tool for generation of syntax analyzer.

To generate output for all the phases of compiler.

47

Subject/

Course

code

Subject/Course


To apply code optimization in the compilation process

314452

Design and

Analysis of

Algorithms

To calculate computational complexity using asymptotic

notations for various algorithms.

To apply Divide & Conquer as well as Greedy approach to

design algorithms.

To practice principle of optimality.

To illustrate different problems using Backtracking.

To compare different methods of Branch and Bound

strategy.

To explore the concept of P, NP, NP-complete, NP-Hard

and parallel algorithms.

314453 Cloud

Computing

To understand the foundation theory behind cloud

computing.

To understand Virtualization technology and common

standards in cloud computing.

To explore effective techniques to program Cloud Systems.

To understand how security is achieved in Cloud

Computing.

To find challenges in cloud computing and delve into it to

effective solutions.

To understand emerging trends in cloud computing.

314454

Data Science &

Big Data

Analytics

To understand Big Data primitives.

To learn and apply different mathematical models for Big

Data.

To demonstrate their Big Data learning skills by developing

industry or research applications.

To analyze each learning model come from a different

algorithmic approach and it will perform differently under

different datasets.

To understand needs, challenges and techniques for big data

visualization.

To learn different programming platforms for big data

analytics.

48

B.E. IT (2015 course)

Semester - I

Subject/Cours

e code

Subject/Course


414453

Information and

Cyber Security

Use basic cryptographic techniques in application

development.

Apply methods for authentication, access control,

intrusion detection and prevention.

To apply the scientific method to digital forensics and

perform forensic investigations.

To develop computer forensics awareness.

Ability to use computer forensics tools.

414454

Machine

Learning and

Applications

Model the learning primitives.

Build the learning model.

Tackle real world problems in the domain of Data

Mining and Big Data Analytics, Information Retrieval,

Computer vision, Linguistics and Bioinformatics.

414455

Software Design

and Modeling

Understand object oriented methodologies, basics of

Unified Modeling Language (UML).

Understand analysis process, use case modeling,

domain/class modeling

Understand interaction and behavior modeling.

Understand design process and business, access and

view layer class design

Get started on study of GRASP principles and GoF

design patterns.

Get started on study of architectural design principles

and guidelines in the various type of application

development.

414456A

Elective - I

Wireless

Communication

s

Understand the basics of propagation of radio signals.

Understand the basic concepts of basic Cellular System

and the design requirements.

Have an understanding of the basic principles behind

radio resource management techniques such as power

control, channel allocation and handoffs.

Gain insights into various mobile radio propagation

models and how the diversity can be exploited to

improve performance.

49

Gain knowledge and awareness of the technologies for

how to effectively share spectrum through multiple

access techniques i.e. TDMA, CDMA, FDMA etc.

Have in-depth understanding of the design

consideration and architecture for different Wireless

Systems like GSM, CDMA, GPRS etc.

Understanding of the emerging trends in Wireless

communication like Wi-Fi, WiMAX, Software Defined

Radio (SDR) and related issues and challenges.

414457C

Elective - II

Software

Testing and

Quality

Assurance

Test the software by applying testing techniques to

deliver a product free from bugs.

Investigate the scenario and to select the proper testing

technique.

Explore the test automation concepts and tools and

estimation of cost, schedule based on standard metrics.

Understand how to detect, classify, prevent and remove

defects.

Choose appropriate quality assurance models and

develop quality.

Ability to conduct formal inspections, record and

evaluate results of inspections.

Semester - II

Subject/Course

code

Subject/Course


414462

Distributed

Computing

System

Understand the principles and desired properties of

distributed systems based on different application

areas.

Understand and apply the basic theoretical concepts

and algorithms of distributed systems in problem

solving.

Recognize the inherent difficulties that arise due to

distributed-ness of computing resources.

Identify the challenges in developing distributed

applications

414463

Ubiquitous

Computing

Demonstrate the knowledge of design of Ubicomp and

its applications.

Explain smart devices and services used Ubicomp.

Describe the significance of actuators and controllers in

real time application design.

50

Subject/Course

code

Subject/Course


Use the concept of HCI to understand the design of

automation applications.

Classify Ubicomp privacy and explain the challenges

associated with Ubicomp privacy.

Get the knowledge of ubiquitous and service oriented

networks along with Ubicomp management.

414464D

Elective - III Internet and

Web

Programming

Demonstrate static website using basic tools.

Develop client side programming skills.

Develop server side programming skills.

Understand web services and handle content

management tools.

Develop mobile website using mobile web

development tools.

Understand aspects of web security and cyber ethics.

414464D

Elective - IV Social Media

Analytics

Understand the basics of Social Media Analytics.

Explain the significance of Data mining in Social

media.

Demonstrate the algorithms used for text mining.

Apply network measures for social media data.

Explain Behaviour Analytics techniques used for social

media data.

Apply social media analytics for Face book and Twitter

kind of applications.

51

Course outcomes (COs) Mechanical Engineering

S.E. Mechanical (2015 course)

Semester - I

Subject/

Course

code

Subject/Course


207002 Engineering

Mathematics – III


appropriate techniques for modeling and analyzing


Solve problems related to Laplace transform and

applications to Signal processing and Control systems

Solve problems related to Fourier transform and Z-

Transform and applications to Signal processing and

Control systems






contour integration of complex functions in the study of

electrostatics and signal processing.

202041 Manufacturing

Process-I

Understand and analyze foundry practices like pattern

making, mold making, Core making and Inspection of

defects.

Understand and analyze Hot and Cold Working, Rolling,

Forging, Extrusion and Drawing Processes.

Understand different plastic molding processes, Extrusion

of Plastic and Thermoforming

Understand different Welding and joining processes and its

defects

Understand, Design and Analyze different sheet metal

working processes

Understand the constructional details and Working of

Centre Lathe

202043 Thermodynamics To be able to explain the basic principles and application of

thermodynamics to the various real life system

52

Subject/

Course

code

Subject/Course


To apply the concepts such as entropy, energy balance also

the calculations of heat work and other thermodynamic

property for various ideal gas process

To estimate performance of various thermodynamics gas

power cycle and gas refrigeration cycle and availability in

each case

To examine the condition of steam and performance of

vapour power cycle and vapour compression cycle

To understand stoichiometric air required for combustion

and will be able to calculate the performance of steam

generators and natural draught requirement in boiler plant

To use psychometric charts and estimate various essential

properties related to psychrometry and process

202044 Material Science

Be able to understand the basic concepts and properties of

material and their microstructure

Be able to distinguish defects in crystal and its effect on

crystal properties and recognize how metals can be

strengthened by cold-working and hot working

Figure out the different mechanical properties of material

by studying different destructive and nondestructive

testing.

Articulate and utilize corrosion prevention strategies and

estimate corrosion behavior of materials and components

Acknowledge the importance of surface modification and

study the different surface modification methods

Be able to understand the basics of Powder metallurgy and

application of powder metallurgy in engineering

202051 Strength of

Materials

Apply knowledge of mathematics, science for engineering

applications

Design and conduct experiments, as well as to analyze and

interpret data

Design a component to meet desired needs within realistic

constraints of health and safety

Identify, formulate, and solve engineering problems

53

Subject/

Course

code

Subject/Course


Practice professional and ethical responsibility

Use the techniques, skills, and modern engineering tools

necessary for engineering practice

Semester - II

Subject/

Course

code

Subject/Course


202045 Fluid Mechanics

Use of various properties in solving the problems in fluids

and various pressure measurement techniques

Know the basics of fluid kinematics and visualization of

flow field in two phase flow

Use of Bernoulli’s equation for solution in fluid and its

various applications

ability to understand the internal flow regimes for velocity

profile and shear stress distribution

Understand the various losses in fluid flow and use of

dimensional analysis technique

Determination of forces Drag and lift on immersed bodies

and study the concepts of boundary layer

202048 Theory of

Machines – I

Identify mechanisms in real life applications.

Perform kinematic analysis of simple mechanisms.

Perform static and dynamic force analysis of slider crank

mechanism.

Determine moment of inertia of rigid bodies experimentally.

Analyze velocity and acceleration of mechanisms by vector

and graphical methods

202049 Engineering

Metallurgy

Describe how metals and alloys formed and how the

properties change due to microstructure

Apply core concepts in Engineering Metallurgy to solve

engineering problems

Ability to understand the concept of phase / Equilibrium

diagram

Recognize how metals can be strengthened by alloying,

cold-working, and heat treatment

54

Subject/

Course

code

Subject/Course


Possess the skills and techniques necessary for modern

materials engineering practice

Ability to understand the importance of non ferrous metal

and alloys

202050 Applied

Thermodynamics

Student will be able to Classify various types of Engines,

Compare Air standard, Fuel Air and Actual cycles and make

out various losses in real cycles

Student will be able to Understand Theory of Carburetion,

Modern Carburetor, Stages of Combustion in S. I. Engines

and Theory of Detonation, Pre-ignition and factors affecting

detonation

Student will be able to Understand Fuel Supply system,

Types of Injectors and Injection Pumps, Stages of

Combustion in CI Engines, Theory of Detonation in CI

Engines and Comparison of SI and CI Combustion and

Knocking and Factors affecting, Criteria for good

combustion chamber and types

Student will be able to Carry out Testing of I. C. Engines

and analyze its performance.

Student will be able to describe construction and working of

various I. C. Engine systems (Cooling, Lubrication, Ignition,

Governing, and Starting) also various harmful gases emitted

from exhaust and different devices to control pollution and

emission norms for pollution control

Student will be able to describe construction, working of

various types of reciprocating and rotary compressors with

performance calculations of positive displacement

compressors

202052

Electrical and

Electronics

Engineering

Develop the capability to identify and select suitable DC

Motor and its speed Control method for given industrial

application

Develop the capability to identify and select suitable

Induction Motor and its Speed control method for given

industrial application

Develop the capability to identify and select suitable

Special Purpose Motor and its speed control method for

given industrial application

Understand architecture of At-mega 328, Arduino IDE

features & Role of Embedded Systems

55

Subject/

Course

code

Subject/Course


Design Programs using conditional statements in Arduino

IDE for various peripherals

Understand Interfacing sensors with Arduino IDE

T.E. Mechanical (2015 course)

Semester - I

Subject/

Course

code

Subject/Course


302041

Design of

Machine

Elements-I

Ability to identify and understand failure modes for

mechanical elements and design of machine elements based

on strength

Ability to design Shafts, Keys and Coupling for industrial

applications

Ability to design machine elements subjected to fluctuating

loads

Ability to design Power Screws for various applications

Ability to design fasteners and welded joints subjected to

different loading conditions

Ability to design various springs for strength and stiffness.

302042 Heat Transfer

Analyze the various modes of heat transfer and implement

the basic heat conduction equations for steady one

dimensional thermal system

Implement the general heat conduction equation to thermal

systems with and without internal heat generation and

transient heat conduction

Analyze the heat transfer rate in natural and forced

convection and evaluate through experimentation

investigation

Interpret heat transfer by radiation between objects with

simple geometries

Analyze the heat transfer equipment and investigate the

performance

302043 Theory of

Machines-II

Student will be able to understand fundamentals of Spur

gear theory which will be the prerequisite for gear design

and to perform force analysis of them

56

Subject/

Course

code

Subject/Course


Student will be able to understand fundamentals of Helical,

Bevel, Worm and Worm gears theory which will be the

prerequisite for gear design and to perform force analysis all

of them

The student will be able to analyze speed and torque in

various types of gear trains and kinematic analysis of

various types of gear box

Student will be able to design cam profile for given follower

motions and understand cam Jump phenomenon, advance

cam curves

The student will synthesize a various mechanisms with

analytical or graphical methods

The student will analyze the gyroscopic couple or effect for

stabilization of Ship, Aero plane and four wheeler vehicle

and Student will choose appropriate drive for given

application (stepped / step-less)

302044 Turbo Machines

To apply thermodynamics and kinematics principles to

impact of jet

To analyze the performance of Pelton turbine

To analyze the performance of reaction turbines

Able to understand the basics of steam nozzles and ability to

calculate various parameters of steam turbine by using

appropriate velocity triangles.

Analyze the performance of centrifugal pump

Calculate performance parameters of centrifugal compressor

302045 Metrology and

Quality Control

Understand the methods of measurement, selection of

measuring instruments / standards of measurement, carryout

data collection and its analysis.

To understands key features of Comparator, Screw Thread,

Gear, Surface roughness metrology.

Understand Advanced trends in Metrology.

Develop an ability of Concept of Quality & Importance of

Quality deployment at Design and Manufacturing

Engineering.

Understand and use/apply Quality Control Techniques/

Statistical Tools appropriately.

Understand Total Quality Management concept/Case Study.

57

Subject/

Course

code

Subject/Course


Semester - II

Subject/

Course

code

Subject/Course


302047

Numerical

Methods and

Optimization

Understand errors & approximations and Use appropriate

Numerical Methods to find roots of equations.

Use Numerical Methods to solve complex simultaneous

equations problems.

Generate Solutions for real life problem using optimization

techniques.

Understand & apply numerical method to find Solutions of

Differential Equations.

Fit curve through given set of data & do regression analysis.

Generate Solutions for Numerical Integration problems.

302048

Design of

Machine

Elements-II

To understand and apply principles of gear design to spur

gears and industrial spur gear boxes.

To become proficient in Design of Helical and Bevel Gear

To develop capability to analyze Rolling contact bearing and

its selection from manufacturer’s Catalogue.

To learn a skill to design worm gear box for various

industrial applications.

Inculcate an ability to design belt drives and selection of

belt, rope and chain drives.

To achieve an expertise in design of Sliding contact bearing

in industrial applications.

302049

Refrigeration

and Air

Conditioning

Able to Illustrate the fundamental principles and

applications of refrigeration and air conditioning system &

able to present the properties, applications and

environmental issues of different refrigerants

Obtain cooling capacity and coefficient of performance by

conducting test on vapor compression refrigeration systems

& Able to estimate Performance of different VCR systems

58

Subject/

Course

code

Subject/Course


and VAR systems.

To study of multistage refrigeration system and cryogenic

with its application

To understand the basic air conditioning processes on

psychometric charts, calculate cooling load for its

applications in comfort and industrial air conditioning.

Able to operate and analyze the refrigeration and air

conditioning systems Components.

Able to design of Air Ducts for different Air Conditioning

Applications and selections of appropriate components for

the same.

302050 Mechatronics

Identification of key elements of mechatronics system and

its representation in terms of block diagram

Understanding the concept of signal processing and use of

interfacing systems such as ADC, DAC, digital I/O

Interfacing of Sensors, Actuators using appropriate DAQ

micro-controller

Time and Frequency domain analysis of system model (for

control application)

PID control implementation on real time systems

Development of PLC ladder programming and

implementation of real life system.

302051 Manufacturing -

Process-II

To understand various parameters which effect on single

point cutting tool during metal cutting process.

To gain the knowledge about machine tools like drilling,

milling & broaching; & its geometry, various type &

applications.

To understand grinding- finishing processes & super

finishing processes like Honing, Lapping, Buffing and

Burnishing.

To be able to figure out application of modern machining.

To understand CNC Technology & its programming.

To get the knowledge of Jigs and Fixtures for variety of

operations.

59

B.E. Mechanical (2015 course)

Semester - I

Subject/Course

code

Subject/Course


402041 Hydraulics and

Pneumatics

To understand working principle of components used

in hydraulic & pneumatic systems.

To identify various applications of hydraulic &

pneumatic systems.

To select appropriate components required for

hydraulic and pneumatic systems.

To analyze hydraulic and pneumatic systems for

industrial/mobile applications.

To design a system according to the requirements.

To develop and apply knowledge to various

applications.

402042 CAD CAM

Automation

Apply homogeneous transformation matrix for

geometrical transformations of 2D CAD entities for

basic geometric transformations.

Use analytical and synthetic curves and surfaces in part

modeling.

Do real times analysis of simple mechanical elements

like beams, trusses, etc. and comment on safety of

engineering components using analysis software.

Generate CNC program for Turning / Milling and

generate tool path using CAM software.

Demonstrate understanding of various rapid

manufacturing techniques and develop competency in

designing and developing products using rapid

manufacturing technology.

Understand the robot systems and their applications in

manufacturing industries.

402043 Dynamics of

Machinery

Estimate natural frequency for single DOF un-damped

& damped free vibratory systems

Determine response to forced vibrations due to

harmonic excitation, base excitation and excitation due

to unbalance forces

Estimate natural frequencies, mode shapes for 2 DOF

undamped free longitudinal and torsional vibratory

60

Subject/Course

code

Subject/Course


systems

Apply balancing technique for static and dynamic

balancing of multi cylinder inline and radial engines

Describe vibration measuring instruments for industrial

/ real life applications along with suitable method for

vibration control

Explain noise, its measurement & noise reduction

techniques for industry and day today life problems

402044

Elective-I

(Finite Element

Analysis)

To understand the fundamental concepts of Finite

Element Method with basics of solid mechanics and

matrix algebra.

To derive and use 1-D element stiffness matrix and

load vector from various methods to solve

displacements and stresses.

To derive and use 2-D element stiffness matrix and

load vector from various methods to solve

displacements and stresses.

To understand isoperimetric elements and can solve

problems of coordinate mapping and numerical

integration.

To solve 1-D steady state heat transfer problems.

To understand the dynamic analysis and also the

concept of eigenvalues.

402045

Elective-II

(Automobile

Engineering)

To compare and select the proper automotive system

for the vehicle.

To analyze the performance of the vehicle.

To diagnose the faults of automobile vehicles.

To apply the knowledge of EVs, HEVs and solar

vehicles

To understand the electrical system in vehicle

To develop knowledge of different safety features of

vehicle

Semester - II

Subject/Course

code

Subject/Course


61

Subject/Course

code

Subject/Course


40207 Energy

Engineering

Discuss the energy resources and energy conversion

methods available for the production of electric power

in India.

Determine the efficiency and output of a modern

Rankine cycle steam power plant from given data,

including superheat, reheat, regeneration, and

irreversibility

Explain the major types of hydro-power and explain

the basic principles of thermal-fission and fast-breeder

nuclear power plants, such as pressurized-water,

boiling-water, and heavy-water reactors.

Calculate the performance of gas turbines with reheat

and regeneration, and discuss the performance of

combined cycle power plants. Study of diesel power

plant

Discuss the principles and potential of direct-electric

power conversion systems, such as fuel-cell and solar

photovoltaic units.

Discuss the environmental impact of electric power

production on air quality, climate change, water, and

land & Discuss the control methods of major pollutants

emitted from fossil-fuel power plants

402048 Mechanical

System Design

To design machine tool gear box.

To apply statistical considerations in design of

mechanical components or systems.

Ability to learn material handling principles and apply

it in design of material handling systems.

To design pressure vessel for different applications.

Ability to select material and to design IC engine

components.

Ability to learn optimum design principles and apply it

to mechanical components.

402049 Elective-III

(Industrial To introduce the concepts, principles and framework of

contents of Industrial Engineering.

62

Subject/Course

code

Subject/Course


Engineering) To acquaint the students with various productivity

enhancement techniques.

To acquaint the students with different aspects of

Production Planning and Control and Facility Design.

To introduce the concepts of various cost accounting

and financial management practices as applied in

industries.

To acquaint the students with different aspects of

Human Resource activities and Industrial Safety rules.

To acquaint students with different aspect of

simulation modeling for various industrial

engineering\applications.

402050

Elective-IV

(Advanced

Manufacturing

Processes)

To understand Various metal forming processes

To gain the Understanding about advanced welding,

casting and forging processes.

To understanding of the advanced techniques for

material processing

To understand micro machining processes

To understand additive manufacturing processes

To understand various measurement techniques used in

micro machining

63

Course outcomes (COs) First Year Engineering

(2015 course)

Semester - I

Subject/

Course

code

Subject/Course


107001 Engineering

Mathematics-I

To solve system of linear equations by using matrices.

To solve many engineering problems by using De’moivres

theorems.

To find the nature of Infinite series and also to find nth

derivatives of any function.

To understand the any function in the series form, also find

limit of any functions by using L-Hospital Rule

To find partial Derivative using Euler’s theorems.

To find Jacobean of any function and error also Maximum

and Minimum value of functions of two variables.

107002 Engineering

Physics

To explore the basic concepts to resolve and analyze many

engineering and technological problems related to

interference and diffraction of light.

To analyze and understand many engineering and

technological aspects related to sound Engineering, sound

acoustics and ultrasonic.

Elaborate and understand use Polarization of light and lasers

in various engineering and industrial purpose.

Understand physics of semiconductor and use of

Semiconductor electronic devices for small scale

applications and eco-friendly use of them in different area

for society.

To compare the classical and quantum mechanical aspects of

physics and study of wave mechanics by mathematical tools

to overcome classical limitations.

To explore knowledge of superconductivity and

nanotechnology to understand many scientific, industrial and

research applications.

102006 Engineering

Graphics-I To imagine the views easily for the points and able to

project it.

64

Subject/

Course

code

Subject/Course


To develop the views and projections of line for engineering

communication.

To read and develop the projection of solids with different

inclination.

To develop the different engineering curves for engineering

communication and also able to develop the surface of any

solid object.

To study the front view, top view and both hand side view

for an object from given isometric views, and vice versa.

103004 Basic Electrical

Engineering

Understand the basic concepts of Electrical Engineering and

Energy Conversion.

Study the basic principles of electromagnetism which form a

ground for the study of various electrical machines.

Study the overall operation of transformer and basic

concepts of static electricity

Understand the basic concepts related to alternating current

electricity and phasor representation of it.

Study of single phase AC circuits with various types of

loading containing R, L and C elements connected in

different series combinations. Study of basic concepts of

three phase AC systems.

Learn the basic tools necessary to solve Linear Time

Invariant DC networks.

110003

Fundamental

Programming

Language-I

Understand types of programming languages with respective

commands of languages

Understand and practice C programming algorithm and

development environment

Interpret and improve programming logic to solve real world

problems

Realize how to use conditional, unconditional statements,

pointers, array, functions& strings in C

65

Semester - II

Subject/

Course

code

Subject/Course


107008 Engineering

Mathematics-II

To study modeling of various Physical Systems such

as Newton’s law of cooling, L-C-R circuits,

Rectilinear Motions, Mass-spring systems, heat

transfer etc

Design and analysis of continuous and discrete

systems where the knowledge of fourier series and

Harmonic Analysis is required.

Advanced techniques to evaluate integrals.

Measurements of arc length of various curves.

To study Sphere, cone and cylinder that arises in

vector calculus, electromagnetic field theory, Cad-

Cam Computer Graphics etc

To find the multiple integrals which are used in

calculating areas, volumes, mean and RMS values,

mass, moment of inertia and center of gravity.

107009 Engineering

Chemistry

Understand the principles of water characterization and

treatment for industrial purposes. Apply the principles of

green chemistry in designing alternative reaction

methodologies to minimize hazards and environmental

degradation

Understand the basic concepts of Electro analytical technics.

Replacement of conventional materials by polymers for

various applications

Explain the properties, separation techniques of crude oil and

applications of petrochemicals.

Over viewing properties and applications of Nano materials

Understand the causes of corrosion, its consequences and

methods to minimize corrosion to improve industrial designs

102013

Basic

mechanical

engineering

To understand the basic concepts of various machine

elements.

To be understood with basic steps involved in machine

66

Subject/

Course

code

Subject/Course


design, mechanical properties of engineering materials and

mechanisms.

To understand the basic common manufacturing processes

used in industries.

To learn the basic terminology, various operations perform

on general purpose machine tools.

To get the concepts clear regarding basic laws of thermal

engineering.

To demonstrate various applications of thermal engineering

for power producing in absorbing device.

101011 Engineering

Mechanics

Understand basic principles of Engineering Mechanics

Study rectilinear motion and its applications apply

curvilinear motion in horizontal and vertical planes.

Apply basic knowledge of math’s and physics to solve real-

world problems

Ability to analyze beam problems, space force problems

Ability to analyze real life structures.

Apply Newton’s second and third law to engineering

problems

104012

Basic

Electronics

Engineering

Characterize, study & analyze the semiconductors, diodes &

diode circuits.

Study & analyze transistor operation & characterize the

current flow of bipolar transistor in CB, CE & CC

configurations.

Understand fundamental concepts of operational amplifiers

& timer circuits.

Study the basics of digital electronics & design simple

digital circuits.

To study basic power devices & understand the elementary

concepts of an electronic instrumentation system.

To understand different modulation techniques & hence

study the basics of communication systems.

110010

Fundamental

Programming

Language-II

To develop competency for the logic, design, coding and

debugging

To acquire fundamental knowledge of Object Oriented

Programming

To get familiar with the fundamentals of World Wide Web

67

Subject/

Course

code

Subject/Course


and HTML

To get familiar with fundamentals of Embedded C

programming

68

Scanned by CamScanner69

70

71

Documents

D Y Patil Institute of Engineering and Technology, Ambi, Pune