D /APPLICATION 600 & 700 SERIES 300 & 600 VOLT MEDIUM DUTY

NEMA Terminal BlocksMedium Duty

DESCRIPTION/APPLICATION

This versatile series of Medium Dutyblocks is available in two majorcategories: 300 volt (600 Series), and600 Volt (700 Series).

DESIGN ADVANTAGES

• High circuit density - 183 circuitsper six foot length, 3/8 inch pitch.

• Select either 300 or 600 volt ULand NEMA rated models.

• Rated up to 50 amperes per circuit.

• Flat base models mount directly tosurfaces or on miniature channel.Dovetail base mounts on standardsize channel.

• Packaged for rapid handling andassembly - 100 per carton.

• Only one end section needed perblock assembly.

• Fanning Strips - interlockingsectional fanning strips allow entirecircuit groups to be connected anddisconnected as a single unit.

• Choice of six contact styles -tubular clamp, tubular screw, strapscrew, strap clamp, quick connectand tubular screw quick connect.

• Readily identify circuits - markdirectly on block sections or useremovable marking strip. Preprintedmarking strips also available.

• Factory assembled blocksavailable.

• Nylon housing is standard,polypropylene is available for fireretardant characteristics.

• Sections snap-fit with phenolicMedium Duty, Heavy Duty,Intermediate Heavy Duty, and Fuse& Switch blocks.

283Above Board Electronics • 800-453-1692 FAX: 408-573-4343 • www.AboveBoardElectronics.com

600 & 700 SERIES300 & 600 VOLT MEDIUM DUTY

LR25557 E63810

Dimensions shown are for reference only. Dimensions are in inches.

LR25557 E63810



600 SERIES300V MEDIUM DUTY 0.375" PITCH

STRAP SCREW STRAP CLAMP TUBULAR SCREW TUBULAR CLAMPCHARACTERISTICS

Type of Block Model Model Model ModelDirect Mount (Flat Base)

Painted, Nylon 621 628 624 625

Unpainted Nylon 611-BU 618 614-BU 615-BU

Polypropylene P621 P628 P624 P625

Channel Mount (Dovetail Base)Painted, Nylon 0621 0628 0624 0625

Unpainted Nylon 0611 0618 0614 0615

Polypropylene P0621 P0628 P0624 P0625

Contact Type

SpecificationsWire Range (AWG)Solid & Stranded 22-10 30-14 18-8 22-10

Wire Strip Length (in.) — 11/3211/32

11/32Screw Type 6-32 6-32 10-32 10-32

slotted binding head slotted binding head slotted pan head slotted pan head

Ampacity 35 A 20 A 50 A 30 A

End Sections Direct Mount, Nylon 630-BU 630-BU 630-BU 630-BU

Direct Mount, Polypropylene P630 P630 P630 P630

Channel Mount, Nylon 0630 0630 0630 0630

Channel Mount, Polypropylene P0630 P0630 P0630 P0630

Comparison (Type of Block)

Direct Mount Channel Mount(Flat Base) (Dovetail Base)


LR25557 E63810



QUICK CONNECT

TUBULAR SCREW

& QUICK CONNECT

CORROSION RESISTANT

STRAP SCREW

CORROSION RESISTANT

TUBULAR SCREW

CORROSION RESISTANT

TUBULAR CLAMP

Model Model Model Model Model

627 629 D621 D624 D625

617 619 D611 D614 D615

P627 P629 DP621 DP624 DP625

0627 0629 D0621 D0624 D0625

0617 0619 D0611 D0614 D0615

P0627 P0629 DP0621 DP0624 DP0625

Contact Type

22-12 18-8 & 22-12 22-10 18-8 22-10

— — — 11/3211/32

#12 and smaller #12 and smaller 6-32 Nickel plated 10-32 Nickel plated 10-32 Nickel platedSlotted Pan Head Slotted Pan Head Slotted Pan Head

20 A 20 A 35 A 50 A 30 A

630-BU 630-BU 630-BU 630-BU 630-BU

P630 P630 P630 P630 P630

0630 0630 0630 0630 0630

P0630 P0630 P0630 P0630 P0630


LR25557 E63810



700 SERIES600V MEDIUM DUTY 0.375" PITCH

STRAP SCREW STRAP CLAMP TUBULAR SCREW

TUBULAR SCREW

PHIL SLOTCHARACTERISTICS

Type of Block Model Model Model ModelDirect Mount (Flat Base)Painted, Nylon 721 728 724 724PS

Unpainted Nylon 711-BU 718 714-BU 714PS

Polypropylene P721 P728 P724 —

Channel Mount (Dovetail Base)Painted, Nylon 0721 0728 0724 0724PS

Unpainted Nylon 0711 0718 0714 0714PS

Polypropylene P0721 P0728 P0724 —

Contact Type

SpecificationsWire Range (AWG)Solid & Stranded 22-10 30-14 18-8 18-8

Wire Strip Length (in.) — 11/3211/32

11/32Screw Type 6-32 6-32 10-32 10-32

Slotted Binding Head Slotted Binding Head Slotted Pan Head Phil Slot

Ampacity 35 A 20 A 50 A 50 A

End Sections Direct Mount, Nylon 730 730 730 730

Direct Mount, Polypropylene P730 P730 P730 P730

Channel Mount, Nylon 0730 0730 0730 0730

Channel Mount, Polypropylene P0730 P0730 P0730 P0730

NOTE: Standard package is 100 pieces for contact, 25 pieces for end section.

Comparison (Type of Block)

Direct Mount Channel Mount(Flat Base) (Dovetail Base)


LR25557 E63810



TUBULAR CLAMP QUICK CONNECT

TUBULAR SCREW

& QUICK CONNECT

CORROSION RESISTANT

STRAP SCREW

CORROSION RESISTANT

TUBULAR SCREW

CORROSION RESISTANT

TUBULAR CLAMP

Model Model Model Model Model

725 727 729 D721 D724 D725

715-BU 717 719 D711 D714 D715

P725 P727 P729 DP721 DP724 DP725

0725 0727 0729 D0721 D0724 D0725

0715 0717 0719 D0711 D0714 D0715

P0725 P0727 P0729 DP0721 DP0724 DP0725

22-10 22-12 18-8 & 22-12 22-10 18-8 22-1011/32 — — — 11/32

11/3210-32 6-32 Nickel plated 10-32 Nickel plated 10-32 Nickel plated

Slotted Pan Head #12 and smaller #12 and smaller Slotted Pan Head Slotted Pan Head Slotted Pan Head

30 A 20 A 20 A 35 A 50 A 30 A

730 730 730 730 730 730

P730 P730 P730 P730 P730 P730

0730 0730 0730 0730 0730 0730

P0730 P0730 P0730 P0730 P0730 P0730



600 AND 700 SERIES MEDIUM DUTYACCESSORIES


BREAK PRE-PUNCHED ELEVATED STEEL AWAY ALUMINUM ALUMINUM

MINIATURE CHANNEL STEEL CHANNEL CHANNEL

Catalog Number

12 60 60-B-36 64 60-SO63-BU 67

Standard Package

3 feet 6 feet 3 feet 6 feet 6 feet3 feet 3 feet

JUMPER SNAP-APART SNAP-APART SNAP-APART FOR TUBULAR SPADE FLANGED RING TONGUE SNAP-APARTCONTACTS JUMPER* JUMPER* JUMPER* JUMPER

Catalog Number

70 J6140 J6240 J6340 73

Standard Package

100 40 ckt 40 ckt 40 ckt 20 ckt

SCREW MINIATURE CHANNEL UNIVERSAL SNAP-IN FOR #12 SEE-THRU GANGING POLARIZINGCLAMPS CLAMPS CLAMPS CHANNEL COVER ROD PLUG

Catalog Number

61 68 62 11 71 30-BU 84

Standard Package

100 100 100 100 50 2 feet 100

MOUNTING CHANNEL

CHANNEL CLAMPS

JUMPERS

* Fits 600 Series (300 volt) strap screw blocks only

Continued

➡


600 AND 700 SERIES MEDIUM DUTYACCESSORIES

289Above Board Electronics • 800-453-1692 FAX: 408-573-4343 • www.AboveBoardElectronics.com Dimensions shown are for reference only. Dimensions are in inches.

PLASTIC PLASTIC VINYL ELEVATED NYLON CLOTH CLOTH MARKING MARKING HOLDING MARKINGTAPE TAPE STRIPS STRIP PLUG PEN

Catalog Number

66 55-BU 50-BU 52-BU 65-BU 99-BU

Standard Package

1 sheet 50 feet 25 feet 18 inches 100 12

MARKING ACCESSORIES

TUBULAR CLAMP TUBULAR CLAMPW/BLADE W/CANTILEVER

#22-10 AWG #22-10 AWG

Catalog Number

BPO35M BP35F

Standard Package

100 12

End Section

0730 0730

Standard Package

25 25

PLUG-IN BLOCKS

Ordering Information

CATALOG STANDARD# DESCRIPTION PACKAGE

74 Tubular Screw 50

78-TB Strap Screw 50

74100 Molding Only, no contact 50

NOTES: For factory assembled fanning strips, suffix catalog number with number desiredExample: Ten factory assembled sections of #74 = 7410NOTES:

For factory assembled blocks on standard steel channelsuffix catalog number with number of blocks desired.(Maximum number of flatbase, preassembled sections is12).Example: Twenty preassembled tubular screw nylon sections on channel = 062420

Example: Ten preassembled tubular screw polypropylenesections on channel = P62510

For unpainted factory assembled blocks supplied with aremovable marking strip add — 1 to catalog number.

For blocks with two or more different contact sections,imprinted marking strips, or special features, consult factory.

Strap Screw Tubular Screw




DOVETAIL BASE MOUNTED ON STANDARD #60 CHANNEL

FLAT BASE MOUNTED ON STANDARD #12 CHANNEL

600 SERIES300 VOLTCHANNEL MOUNT





FLAT BASE MOUNTED ON MINIATURE #12 CHANNEL

700 SERIES600 VOLTCHANNEL MOUNT




600 SERIES300 VOLTFLAT BASE

700 SERIES600 VOLTFLAT BASE

Dimensions shown are for reference only. Dimensions are in inches.293

Above Board Electronics • 800-453-1692 FAX: 408-573-4343 • www.AboveBoardElectronics.com


BP SERIESPLUG-IN BLOCKS



294Above Board Electronics • 800-453-1692 FAX: 408-573-4343 • www.AboveBoardElectronics.com Dimensions shown are for reference only. Dimensions are in inches.

ERT SERIESMEDIUM DUTYRADIATION RESISTANT

PHYSICAL PROPERTIES

EFFECT OF RADIATION ON PHYSICAL PROPERTIESThe effects of radiation (neutron and gamma particles) on RYTON® R-4 materialhave been studied. Since Ryton®, as an engineering plastic, may fill applicationsin nuclear installations these effects are important. The test results show noeffects on physical properties by these relatively high exposures to gamma andneutron radiation. There is no indication from these data of crosslinking ordegradation of the RYTON® R-4 material.

LR25557 E63810

Housing: RYTON® (Polyphenylene Sulfide)

ASTM TestDensity 100 lbs./ft.3 D1505-68Tensile Strength 19,500 psi D638-72Elongation 1.3% D638-72Flexural Modulus 1,700,000 psi D790-91Flexural Strength 29,000 psi D790-91Compressive Strength 21,000 psi D695-69Izod Impact Strength

Unnotched, 1/8” Specimen 8.0 ft. lbs./in.Notched, 1/8” Specimen 1.4 ft. lbs./in.

Rockwell Hardness R-123 D785-65Water Absorption 0.05% D570-63Heat Distortion Temp. @ 264 psi 500˚F D648-72Specific Heat, 24 hrs. @ 25˚C 0.25 btu/lb./˚FThermal Conductivity 2.0 btu-in./h-ft.2 FCoefficient/Linear Thermal Exp. 2.5 x 10-5 in./in./˚ FFlammability, UL 94 V-ODielectric Strength 350 volts/mil D149-64Dielectric Constant, 25˚C 1 Khz 3.9 D150-70

1Mhz 3.8Dissipation Factor, 25˚C 1Khz 0.0010 D150-70

1Mhz 0.0013

Conditions In Reactor Core In Water Pool

Temperature 35˚C 30˚CRadiation Mainly nuetrons Mainly gammaIntensity 1010 ergs g-1 (C) 109 ergs g-1 (C)Used Particle Detectors Calorimeter and Ionization chamber

activation detectors

Radiation Dose Flexural Strength Modulus ofpsi Elasticity, psi

0 28,700 1,900,000

A. Neutron5 x 10 rad 29,000 1,910,0001 x 10 rad 28,900 1,880,000

B. Gamma5 x 10 rad 29,700 1,810,0001 x 10 rad 30,200 1,840,0005 x 10 rad 28,500 1,820,000

For additional specifications and orderinginformation, see pages 13 and 14. RYTON is a registered trademark of Phillips Chemical Company

CATALOGDESCRIPTION NUMBER

Strap Screw 0711ERT

Tubular Clamp 0715ERT

End Section 0730ERT

Ordering Information

Documents

D /APPLICATION 600 & 700 SERIES 300 & 600 VOLT MEDIUM DUTY