Cyclone Tubular Fencing

• DIPLOMAT™ • VANGUARD™

• AMBASSADOR™ • WARDEN™ • GUARDIAN™

IndustrIal tubular FencIng

Why chOOSE cycLONE?Cyclone® has been providing fencing solutions to Australia for over 100 years. We have an extensive range of products that are built to last. So if you’re looking for top quality at a great price, don’t peek over our fence, drop in and meet our friendly experts today.

chOOSING cycLONE IS A WORThy INVESTMENT.

Diplomat™ Ambassador™ Vanguard™ Warden™ Guardian™

cONTAcT INfORMATIONCall us on 1800 fENcES (1800 336237) and our helpful staff will assist you in providing a cost effective solution for your fencing requirements.

Alternatively log onto www.arcfences.com.au

Furthermore, contact your local ARC store to get a full range of products including:

• IndustrialWeldmeshFencing

• AluminiumTubularFencing

• SteelTubularFencing

• WeldmeshFencing

• CycloneChainwireFencing

• Excellent security - provides constant security against trespassers, pilferers and animals

• Long-term durability - stands up to rugged conditions and requires minimal maintenance

• Design flexibility - additional fencing can be matched with the original for future extensions

• footprint - same product wherever you go

• helpful advice - our friendly team of fencing staff will work with you to ensure you’ll get the right product for your project

• Recognised excellence - compliance with Australian Standards

cOMPLETE RANGE Of INDUSTRIAL TUBULAR fENcINGForwarrantydetailsandTermsandConditions,pleaserefertoourwebsitewww.arcfences.com.au or contact your local ARC Fences store.

Cyclone® Security. Registered trademark used under licence by Australian Reinforcing Company (ARC) ABN 89 069 426 955

ARC29193 Cyclone Brochure_FA.indd 1 1/9/10 10:42:56 AM

Additional information

Posts 65 x 65 x 2.0mm measurement at 2650mm, 3000mm, 3300mm long. Non Standard Panels & Gates Non standard panels & gates can be manufactured upon request.

fittings: Flanges – Standard fixing to posts by 40mm x 40mm steel rail flanges andTekScrewsor*Anti-TheftScrews.*Anti-TheftScrewsareantitamperandprovideyouwithpeaceofmind.Theycanbesuppliedonrequest.

All gates come complete with drop bolts, lugs, chain, striker (single gate only) and ball bearing hinges.

through raIl Face welded

Throughraildesignisaconceptwherethepanelsarestrengthened by passing the vertical tubes through the top and bottom rails of the fence.

Face welded design is a concept where by the welds and tubes are exposed.

Pickets extend through top and bottom rails (through rail) by 150mm and areat140mmcentres.Thetopandbottomofeveryjointareweldedonthetop and bottom rail. Gates fall under the same guidelines. All pickets are crimped to a point at the top. Sliding Gates can be priced on application.

Standard Panel Sizes 2400mm opening at 1800mm high 2400mm opening at 2100mm high 2400mm opening at 2400mm high

Single Gates 1000mm opening by 1800mm, 2100mm, 2400mm high Single Gates are available in opening sizes up to 3000mm Double Gates 4000mm opening by 1800mm, 2100mm, 2400mm high 6000mm opening by 1800mm, 2100mm, 2400mm high Double Gates are available in opening sizes up to 8000mm.

Pickets are face welded to the top and bottom rails and extend past the railsby150mmandareat140mmcentres.Thetopandbottomofeveryjoint are welded on the top and bottom rail. Gates fall under the same guidelines. All pickets are crimped to a point at the top. Sliding Gates can be priced on application.



dIplomat™

Vanguard™

Pickets extend through top and bottom rails (through rail) by 150mm and areat140mmcentres.Thetopandbottomofeveryjointareweldedonthetop and bottom rail. Gates fall under the same guidelines. Pickets have a square top vertical bar (fitted with a flush fitting cap). Sliding Gates can be priced on application.


Single Gates 1000mm opening by 1800mm, 2100mm, 2400mm high Single Gates are available in opening sizes up to 3000mm

Double Gates 4000mm opening by 1800mm, 2100mm, 2400mm high 6000mm opening by 1800mm, 2100mm, 2400mm high Double Gates are available in opening sizes up to 8000mm.

ambassador™

warden™

Pickets extend through top and bottom rails (through rail) by 150mm and the bottom and 450mm at the top and are at 140mm centres. Theyarecrankedat300mmfromthetop.Thetopandbottomofeveryjointarewelded on the top and bottom rail. Gates fall under the same guidelines. All pickets are crimped to a point at the top. Sliding Gates can be priced on application.


Single Gates 1000mm opening by 1800mm, 2100mm, 2400mm high Single Gates are available in opening sizes up to 3000mm Double Gates 4000mm opening by 1800mm, 2100mm, 2400mm high 6000mm wide by 1800mm, 2100mm, 2400mm high Double Gates are available in opening sizes up to 8000mm.

guardIan™

Pickets are face welded to the top and bottom rails and extend past the rails by150mmandareat140mmcentres.Thetopandbottomofeveryjointarewelded on the top and bottom rail. Gates fall under the same guidelines. Pickets have a square top vertical bar (fitted with a flush fitting cap). Sliding Gates can be priced on application.



horizontal Rails: 40 X 40 x 1.6mm Galvabond Steel

Vertical Pickets: 25 x 25 x 1.6mm Galvabond Steel









NEW

NEW

ARC29193 Cyclone Brochure_FA.indd 2 1/9/10 10:43:13 AM

Documents

Cyclone Tubular Fencing