Embed Size (px)
Citation preview
Re S.p.A. via Firenze 320060 Bussero (MI) Italy
T +39 02 9524301 F +39 02 95038986 E [email protected]
Assistenza tecnicaTechnical supportT +39 02 952430.300E [email protected]
Assistenza commercialeSales supportT +39 02 952430.200E [email protected]
CX Combi�ex calipers are particularly designed for applications that require low or medium braking force.
The special characteristic of this system is its modularity: one or ore calipers can be installed on brake discs PX with di�erent dimensions obtaining the perfect solution for every requirement.
Moreover, each caliper can be activated or disactivated depending on the required torque, giving maximum �exibility when using di�erent kind of materials.
All calipers are provided with absolute asbestos free pads to safeguard the operator�s health and the working environment.
CX calipers are also available with 10%, 16% and 40% reduced torque for those applications that require highest sensibility in terms of braking and where the required torque is very low. The percentage value indicates the braking force in comparison with the standard caliper.
Moreover, depending on the disc, they can be provided with di�erent kind of brackets for an easy, quick and perfect installation.
Modularity
Flexibility
High reliability and sensibility with low torques
Reduced torque version for highest sensibility
Respect for the environment
Easy installation
Datasheet 01021/EN - 09/16
CXPNEUMATIC POSITIVE CALIPER
1/8 gas
6243
2
105,
5
12,5
18
d
92112
40Ø11
Ø11
25
43
69d-
65 2
136,5
Re S.p.A. via Firenze 320060 Bussero (MI) Italy
T +39 02 9524301 F +39 02 95038986 E [email protected]
Assistenza tecnicaTechnical supportT +39 02 952430.300E [email protected]
Assistenza commercialeSales supportT +39 02 952430.200E [email protected]
TECHNICAL DRAWING
Tangential force (F) at 6 bar Standard caliper max 1682 N 10% reduced caliper 153 N 16% reduced caliper 286 N 40% reduced caliper 675 N
Max pressure 6 bar
Pad center (Mp) 0,065 m
*Data are subject to technical change without notice
TECHNICAL CHARACTERISTICS
Disc diameter - mm
35 70 105 140 175 210 245 280 385315 35000
1
2
3
4
5
6 200 250 300 356 400 515
Braking torque in tensioning - Nm
Air
pres
sure
- b
ar
Disc diameter - mm
2 4 6 8 10 12 14 16 2218 2000
1
2
3
4
5
6 200 250 300
Braking torque in tensioning - Nm
Air
pres
sure
- b
ar
Disc diameter - mm
4 8 12 16 20 24 28 32 4436 4000
1
2
3
4
5
6 200 250 300
Braking torque in tensioning - Nm
Air
pres
sure
- b
ar
Disc diameter - mm
14 21 28 35 42 49 56 63 8470 7700
1
2
3
4
5
6 200 250 300
Braking torque in tensioning - Nm
Air
pres
sure
- b
ar
CX reduced caliper 10% (yellow) CX reduced caliper 16% (blue) CX reduced caliper 40% (red)
