Embed Size (px)
Citation preview
1
CURRICULUM VITAE
Brief DescriptionIr. Dr. Dominic Foo is a Professor of Process Design and Integration at the University of NottinghamMalaysia Campus, and is the Founding Director for the Centre of Excellence for Green Technologies. He isa Fellow of the Institution of Chemical Engineers UK (IChemE), a Chartered Engineer with the UKEngineering Council, a Professional Engineer with the Board of Engineer Malaysia (BEM), as well as the2012/3 session chairman for the Chemical Engineering Technical Division of the Institution of EngineersMalaysia (IEM). He is a world leading researcher in process integration for resource conservation. Heestablishes international collaboration with researchers from various countries in the Asia, Europe, Americanand Africa. Professor Foo is an active author, with two books, more than 80 journal papers and made morethan 130 conference presentations, with more than 15 keynote/plenary speeches. He served asInternational Scientific Committees for many important international conferences (CHISA/PRES, FOCAPD,ESCAPE, PSE, etc.). Professor Foo is the Chief Editor for IEM Journal, Subject Editor for Trans IChemEPart B (Process Safety & Environmental Protection, Elsevier), Editorial Board Member for Clean Technologyand Environmental Policy (Springer), and Chemical Engineering Transactions. He is the winner of theInnovator of the Year Award 2009 of IChemE, Young Engineer Award 2010 of IEM, Outstanding YoungMalaysian Award 2012 of Junior Chamber International (JCI), as well as the SCEJ (Society of ChemicalEngineers, Japan) Award for Outstanding Asian Researcher and Engineer.
Contact Address and Area of SpecialisationDepartment of Chemical and Environmental EngineeringCentre of Excellence for Green TechnologiesUniversity of Nottingham (Malaysia CampusBroga Road, 43500 Semenyih, Selangor, Malaysia.Tel: +60(3)8924-8130 (Off) ; +60(12)709-1414 (Mobile) ; Fax: +60(3)8924-8017Email: [email protected] ; [email protected] ;URL: www.nottingham.edu.my/CEGT ; www.nottingham.edu.my/SPI
Area of specialisations:1. Resource conservation (water minimisation, hydrogen network, property integration) with process
integration techniques – pinch analysis and mathematical optimisation2. Computer-aided steady-state process simulation for batch and continuous processes3. Carbon-constrained energy planning
Educational BackgroundDegree : PhD (Chemical) Completion Date : May 2006Name of Institution : Universiti Teknologi Malaysia (UTM)Thesis title : Generic Cascade Analysis Technique for Setting the Minimum Targets for Resource
Conservation
Degree : PGCert (Higher Education) Graduation Date : July 2010Name of Institution : University of Nottingham
Degree : M Eng (Chemical) Graduation Date : March 2003Name of Institution : Universiti Teknologi Malaysia (UTM)Thesis title : Synthesis of Mass Exchange Network for Batch Process Systems
Degree : B Eng (Chemical) (HONS) Graduation Date : August 2000Name of Institution : Universiti Teknologi Malaysia (UTM)
Personal ParticularsName : DOMINIC CHWAN YEE FOODate of Birth : 12 March 1977Nationality : MalaysianMarital Status : Married
2
Professional Involvement1. Fellow, Institution of Chemical Engineers UK, IChemE (No: 99900916)2. Corporate Member, Institution of Engineers, Malaysia (No: 22445).3. Professional Engineer, Board of Engineer Malaysia (No. 13975)4. Member, Chinese American Chemical Society, US.5. Fellow, The Higher Education Academy, UK6. Ordinary Member, Institute of Materials, Malaysia (IMM; No: 3493)7. Senior Member, Asia-Pacific Chemical, Biological& Environmental Engineering Society (No: 100540).
Professional involvement at the Institution of Engineers, Malaysia (IEM) Committee member for Chemical Engineering Technical Division (CETD) since 2006 Secretary/Treasurer for CETD (session 2010/11) Deputy Chairman for CETD (session 2011/12) Chairman for CETD (session 2012/13) Subject editor for IEM Journal Major activities: organise and deliver talks and workshops (regular), research paper competition (2007/8),
chemical engineering design competition (2012/13)
Awards1. Awarded National Science Fellowship (NSF) scholarship from Ministry of Science, Technology and
Environment for postgraduate study (MEng: 2000 – 2002; PhD: 2003 - 2006).2. Silver Medal for Best Presenter in Annual Workshop of National Science Fellowship 2002.3. Awarded National Science Fellowship (NSF) scholarship from Ministry of Science, Technology and
Environment for postgraduate (PhD) study (2003 – Present).4. 31st Int. Exhibition of Invention, New Techniques and Products. Geneva, Switzerland; 2003 (Silver
Award).5. Industrial Art and Technology Exhibition (INATEX 2004), “Water-MATRIX - A Computer Software for
Water and Energy Reduction in Industry and Public Buildings”, Universiti Teknologi Malaysia, 6 – 8 July2004 (Silver Award – Product category).
6. Expo Science, Technology & Innovation 2004, “Water-MATRIX - A Computer Software for Water andEnergy Reduction in Industry and Public Buildings”, Putra World Trade Centre, 27 – 29 August 2004(Silver Medal – Environmental category).
7. WaterInno Awards 2009, Water Malaysia 2009, “A Novel Process Integration Technique for MaximisingWater Recovery in the Process Plant”, Putra World Trade Centre, 19 – 21 April 2009 (Silver)(contributors: Dominic Foo, Irene Chew, Denny Ng, Raymond R. Tan, Mahmoud M. El-Halwagi).
8. “Top-75 most cited articles” as published in the IChemE journals 2006 – 2009, Elsevier (#3, 4 and 23)9. Top 20 Most Cited IChemE Papers between 2008-2010 (#19)
www.elsevier.com/wps/find/P03.cws_home/highly_cited_papers.10. Most Cited Chemical Engineering Research and Design Articles since 2007 - Chemical Engineering
Research and Design (4th
and 9th
rank of) (http://www.journals.elsevier.com/chemical-engineering-research-and-design/most-cited-articles/).
11. Innovator of the Year Award 2009 of IChemE UKwww.nottingham.edu.my/Engineering/Research/Environment/IChemEAward.aspx.
12. Young Engineer Award 2010, Institution of Engineers, Malaysia (IEM).13. The Outstanding Young Malaysian Award 2012, Junior Chamber International (JCI).14. Outstanding Asian Researcher and Engineer, Society of Chemical Engineers, Japan (SCEJ)
Publications
Book
1. Foo, D. C. Y., El-Halwagi, M. M. and Tan, R. R. (2012). Recent Advances in Sustainable ProcessDesign and Optimisation, World Scientific/Imperial College Press.
2. Foo, D. C. Y. (2012). Process Integration for Resource Conservation, CRC Press, Boca Raton,Florida, US.
3. Foo, D. C. Y. (2012). Solution Manual for “Process Integration for Resource Conservation”, CRCPress, Boca Raton, Florida, US.
3
Editorial
1. Foo, D. C. Y., Raman, A. A. A. and Law, C. L. (2009). IEM Journal. Vol. 70, No.4 – Special Issue onChemical Engineering (Guest Editor).
2. Foo, D. C. Y., Raman, A. A. A. and Law, C. L. (2010). IEM Journal. Vol. 71, No.3 – Special Issue onEnergy and Environment (Guest Editor).
3. Foo, D. C. Y. and Biegler, L. T. (2011). Industrial & Engineering Chemistry Research. Vol. 50, No.7 –Special Issue on Water Network Synthesis (Guest Editor).
4. Foo, D. C. Y. and Lam, H. L. (2013). Clean Technology and Environmental Policy. Vol. 15, No. 5 –Special Issue on Green Technologies for Asia-Pacific Economies (Guest Editor).
5. Foo, D. C. Y. (2013). JURUTERA. Vol. 2013, No. 9 – Special Issue on Chemical Engineering.
Book chapters
1. Majozi, T. and Foo, D. C. Y. (2008). Water Minimization in a Soft Drinks Industry – A South AfricanCase Study, in Smith, R., Klemeš, J. and Kim, L.-K. (Eds.) Handbook of Water and EnergyManagement in Food Processing, Woodhead Publishing Limited, Cambridge, UK.
2. Foo, D. C. Y. Aziz, R. A., Kumaresan, S., and Tan, R. R. (2009). Process Modelling and Life CycleAssessment for Tongkat Ali Extraction, in Lee, C. T. Muhamad I. I. (Eds.) Special Topics inBioprocess Engineering Volume II. Penerbit Universiti Teknologi Malaysia, Skudai, Malaysia.
3. Klemeš, J., Lam, H. L. and Foo, D. C. Y. (2011). Water Integration for Recycling and Recovery inProcess Industry, in Atimtay, A. T. and Sikdar, S. K. (Eds.) Security of Industrial Water Supply andManagement, Springer.
4. Foo, D. C. Y. (2012). Resource Conservation through Pinch Analysis, in Foo, D. C. Y., El-Halwagi, M.M. and Tan, R. R. (Eds.) Recent Advances in Sustainable Process Design and Optimisation, WorldScientific/Imperial College Press.
5. Chen, C.-L., Ciou, Y.-J., Foo, D. C. Y. (2012). Indirect Heat Integration of Batch Processes, in Foo,D. C. Y., El-Halwagi, M. M. and Tan, R. R. (Eds.) Recent Advances in Sustainable Process Designand Optimisation, World Scientific/Imperial College Press.
6. Foo, D. C. Y. and Ng, D. K. S. (2013). Process integration in the process design, in Klemeš, J., (Ed.)Handbook of process integration.
7. Tan, R. R., and Foo, D. C. Y. (2013). Multi-objective pinch analysis, in Klemeš, J., (Ed.) Handbook ofprocess integration.
Refereed journal (published/in review)
1. Aziz, R. A., Sarmidi, M. R., Kumaresan, S., Taher, Z. M. and Foo, C. Y. (2003). PhytochemicalProcessing: The Next Emerging Field in Chemical Engineering - Aspects and Opportunities, JurnalKejuruteraan Kimia Malaysia, 3: 45-60.
2. Foo, C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2004). Synthesis of Mass ExchangeNetwork for Batch Processes – Part I: Utility Targeting, Chemical Engineering Science, 59(5): 1009-1026.
3. Manan, Z. A., Tan, Y. L. and Foo, D. C. Y. (2004). Targeting the Minimum Water Flow Rate UsingWater Cascade Analysis Technique, AIChE Journal, 50(12): 3169-3183.
4. Foo, C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2005). Synthesis of Mass ExchangeNetwork for Batch Processes – Part II: Minimum Units Target and Batch Network Design, ChemicalEngineering Science, 60(5): 1349-1362.
5. Foo, D. C. Y., Manan, Z. A. and Tan, Y. L. (2005). Synthesis of Maximum Water Recovery Networkfor Batch Process Systems, Journal of Cleaner Production, 13(15): 1381-1394.
6. Foo, D. C. Y., Kazantzi, V., El-Halwagi, M. M. and Manan, Z. A. (2006). Cascade Analysis forTargeting Property-based Material Reuse Networks, Chemical Engineering Science, 61(8): 2626-2642.
7. Foo, D. C. Y., Manan, Z. A. and El-Halwagi, M. M. (2006). Correct Identification of Limiting WaterData for Water Network Synthesis, Clean Technologies and Environmental Policy, 8(2): 96-104.
8. Athimulam, A., Kumaresan, S., Foo, D. C. Y., Sarmidi, M. R. and Aziz, R. A. (2006). Modelling andOptimisation of Eurycoma longifolia Water Extract Production, Food and Bioproducts Processing84(C2):139-149.
9. Foo, D. C. Y. and Manan, Z. A. (2006). Setting the Minimum Flowrate Targets for Utility Gases UsingCascade Analysis Technique, Industrial & Engineering Chemistry Research, 45(17): 5986-5995.
4
10. Ng, D. K. S. and Foo, D. C. Y. (2006). Evolution of Water Network with Improved Source ShiftAlgorithm and Water Path Analysis, Industrial & Engineering Chemistry Research, 45(24), 8095-8104.
11. Hul, S., Tan, R. R., Auresenia, J., Fuchino, T. and Foo, D. C. Y. (2007). Synthesis of Near-OptimalTopologically-Constrained Property-Based Water Network Using Swarm Intelligence, CleanTechnologies and Environmental Policy, 9(1), 27-36.
12. Manan, Z. A., Tan, Y. L., Foo, D. C. Y. and Tea, S. Y. (2007). Application of Water Cascade AnalysisTechnique for Water Minimisation in a Paper Mill Plant, International Journal of Environment andPollution, 29(1-3), 90-103.
13. Tan, R. R. and Foo, D. C. Y. (2007). Pinch Analysis Approach to Carbon-Constrained Energy SectorPlanning. Energy, 32(8), 1422-1429.
14. Hul, S., Ng, D. K. S., Tan, R. R., Chiang, C. L. and Foo, D. C. Y. (2007). Crisp and FuzzyOptimisation Approaches for Water Network Retrofit, Chemical Product and Process Modeling, 2(3),Article 6.
15. Tan, R. R., Foo, D. C. Y. and Manan, Z. A. (2007). Assessing the Sensitivity of Water Reuse Networkto Noisy Mass Loads Using Monte Carlo Simulation. Computers and Chemical Engineering, 31(10),1355-1363.
16. Tan, Y. L., Manan, Z. A. and Foo, D. C. Y. (2007). Retrofit of Water Network with Regeneration UsingWater Pinch Analysis, Process Safety and Environmental Protection, 85(B4), 305-317 (23th rank in“Top-75 most cited articles” in the IChemE journals 2006 – 2009).
17. Foo, D. C. Y. (2007). Water Cascade Analysis for Single and Multiple Impure Fresh Water Feed.Chemical Engineering Research and Design, 85(A8), 1169-1177 (4
thrank in “Top-75 most cited
articles” in the IChemE journals 2006 – 2009).18. Kuan, C. K., Foo, D. C. Y., Kumaresan, S., Aziz, R. A. and Tan, R. R. (2007), Streamlined Life Cycle
Assessment of Residue Utilization Options in Tongkat Ali (Eurycoma longifolia) Water ExtractManufacturing Process, Clean Technologies and Environmental Policy, 9(3): 225-234.
19. Ng, D. K. S., Foo, D. C. Y. Tan, R. R. and Tan, Y. L. (2007). Ultimate Flowrate Targeting withRegeneration Placement, Chemical Engineering Research and Design, 85 (A9) 1253–1267 (3rd rankin “Top-75 most cited articles” in the IChemE journals 2006 – 2009; 8
thrank of top 10 cited articles
published in 2005 - 2010 -http://www.elsevier.com/wps/find/journaldescription.cws_home/713871/description#description).
20. Foo, D. C. Y., Hallale, N. and Tan, R. R. (2007). Pinch Analysis Approach to Short-Term Schedulingof Batch Reactors in Multi-Purpose Plants, International Journal of Chemical Reactor Engineering, 5:A94.
21. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2007). Targeting for Total Water Network – Part 1: WasteStream Identification, Industrial & Engineering Chemistry Research, 46(26), 9107-9113.
22. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2007). Targeting for Total Water Network – Part 2: WasteTreatment Targeting and Interactions with Water System Elements, Industrial & EngineeringChemistry Research, 46(26), 9114-9125.
23. Hul, S., Tan, R. R., Auresenia, J., Fuchino, T. and Foo, D. C. Y. (2007). Water Network SynthesisUsing Mutation-Enhanced PSO, Process Safety and Environmental Protection, 85(B6), 1-8.
24. Tan, R. R., Foo, D. C. Y., Ng, D. K. S., Chiang, C. L. Hul, S. and Ku-Pineda, V. (2007). AnApproximate Mixed Integer Linear Programming (MILP) Model for The Design of WaterReuse/Recycle Networks with Minimum Emergy, Asia-Pacific Journal of Chemical EngineeringJournal, 2(6), 566-574.
25. Shoaib, A. M., Aly, S. M., Awad, M. E., Foo, D. C. Y. and El-Halwagi, M. M. (2008). A HierarchicalApproach for the Synthesis of Batch Water Network, Computers & Chemical Engineering, 32(3), 530-539.
26. Tan, R. R., Col-long, K. J., Foo, D. C. Y., Hul, S. and Ng, D. K. S. (2008). A Methodology for theDesign of Efficient Resource Conservation Networks Using Adaptive Swarm Intelligence, Journal ofCleaner Production, 16(7), 822-832.
27. Chan, J. H., Foo, D. C. Y., Kumaresan, S., Aziz, R. A. and Hassan, M. A. A. (2008), An IntegratedApproach for Water Minimisation in a PVC Manufacturing Process, Clean Technologies andEnvironmental Policy, 10(1): 67-79.
28. Foo, D. C. Y. (2008). Flowrate Targeting for Threshold Problems and Plant-Wide Integration forWater Network Synthesis, Journal of Environmental Management, 88(2), 253-274.
29. Foo, D. C. Y., Ooi, M. B. L., Tan, R. R. and Tan, J. S. (2008). A Heuristic-Based Algebraic TargetingTechnique for Aggregate Planning in Supply Chains, Computers and Chemical Engineering, 32(10)2217-2232.
5
30. Foo, D. C. Y., Chew, Y. H. and Lee, C. T. (2008). Minimum Units Targeting And Network Evolutionfor Batch Heat Exchanger Network. Applied Thermal Engineering, 28(16), 2089-2099.
31. Foo, D. C. Y., Tan, R. R. and Ng, D. K. S. (2008). Carbon and Footprint-Constrained Energy SectorPlanning Using Cascade Analysis Technique. ENERGY, 33(10), 1480-1488.
32. Ng, D. K. S., Foo, D. C. Y., Rabie, A. and El-Halwagi, M. M. (2008). Simultaneous Synthesis ofProperty-Based Water Reuse/Recycle and Interception Networks for Batch Processes. AIChEJournal, 54(10), 2624-2632.
33. Ng, D. K. S., Foo, D. C. Y. Tan, R. R. and Tan, Y. L. (2008). Extension of Targeting Procedure for‘Ulltmate Flowrate Targeting with Regeneration Placement’ by Ng et al., Che. Eng. Res. Des. 85(A9): 1253 – 1267. Chemical Engineering Research and Design, 86(10), 1182-1186.
34. Chew, I, M. L., Ng, D. K. S., Foo, D. C. Y., Tan, R. R., Majozi, T. and Gouws, J. (2008). Synthesis ofDirect and Indirect Inter-Plant Water Network. Industrial & Engineering Chemistry Research, 47,9485-9496.
35. Tan, J., Foo, D. C. Y., Sivakumar, K. and Aziz, R. A. (2008). Computer-Aided Design Tools forDebottlenecking A Batch Pharmaceutical Production, Institution of Engineers, Malaysia (IEM) Journal69(4), 30-37.
36. Lee, S. C., Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2009). Extended Pinch Targeting Techniquesfor Carbon-Constrained Energy Sector Planning, Applied Energy, 86(1), 60-67.
37. Tan, R. R., Foo, D. C. Y., Aviso, K. B. and Ng, D. K. S. (2009). The Use of Graphical Pinch Analysisfor Visualizing Water Footprint Constraints in Biofuel Production. Applied Energy, 86: 605-609.
38. Ng, D. K. S., Foo, D. C. Y. Tan, R. R., Pau, C. H. and Tan, Y. L., (2009). Automated Targeting forConventional and Bilateral Property-Based Resource Conservation Network. Chemical EngineeringJournal, 149: 87-101.
39. Tan, R. R., Ng, D. K. S. and Foo, D. C. Y. (2009). Pinch Analysis Approach to Carbon-ConstrainedPlanning for Sustainable Power Generation. Journal of Cleaner Production, 17(10), 940-944.
40. Tan, R. R., Ng, D. K. S., Foo, D. C. Y. and Aviso, K. B. (2009). A Superstructure Model for theSynthesis of Single-Contaminant Water Networks with Partitioning Regenerators. Process Safety andEnvironmental Protection, 87, 197-205 (ranked 19
thamong Top 20 Most Cited IChemE Papers
between 2008-2010, http://www.elsevier.com/wps/find/P03.cws_home/highly_cited_papers).41. Foo, D. C. Y. (2009). A State-of-the-art Review of Pinch Analysis Techniques for Water Network
Synthesis. Industrial & Engineering Chemistry Research, 48 (11), 5125-5159.42. Chew, I. M. L. and Foo, D. C. Y. (2009). Automated Targeting for inter-Plant Water Integration.
Chemical Engineering Journal, 153(1-3), 23-36.43. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2009). Automated Targeting Technique for Single-
Component Resource Conservation Networks – Part 1: Direct Reuse/Recycle. Industrial &Engineering Chemistry Research, 48(16), 7637-7646.
44. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2009). Automated Targeting Technique for Single-Component Resource Conservation Networks – Part 2: Single Pass and Partitioning WasteInterception Systems. Industrial & Engineering Chemistry Research, 48(16), 7647-7661.
45. Chew, I. M. L., Tan, R. R., Foo, D. C. Y. and Chiu, A. S. F. (2009). Game Theory Approach to theAnalysis of Eco-Industrial Water Integration. Journal of Cleaner Production, 17(18), 1611–1619.
46. Ng, D. K. S., Foo, D. C. Y., Tan, R. R. and El-Halwagi, M. M. (2010). Automated TargetingTechnique for Concentration- and Property-Based Total Resource Conservation Network. Computersand Chemical Engineering, 34(5): 825-845.
47. Tan, R. R., Ng, D. K. S. and Foo, D. C. Y. (2010). Graphical Approach to Minimum FlowrateTargeting for Partitioning Water Pretreatment Unit, Chemical Engineering Research and Design88(4): 393-402.
48. Bandyopadhyay, S., Sahu, G. C., Foo, D. C. Y. and Tan, R. R. (2010). Segregated Targeting forMultiple Resources Using Decomposition Algorithm, AIChE Journal, 56(5): 1235-1248.
49. Tjan, W., Tan, R. R. and Foo, D. C. Y. (2010). A Graphical Representation of Carbon FootprintReduction for Chemical Processes. Journal of Cleaner Production, 18(9): 848-856.
50. Pękala, Ł. M., Tan, R. R., Foo, D. C. Y., Jeżowski, J. M. (2010). Optimal energy planning models withcarbon footprint constraints. Applied Energy, 87(6): 1903-1910.
51. Chen, C.-L., Lee, J.-Y., Ng, D. K. S., and Foo, D. C. Y. (2010). A Unified Model of PropertyIntegration for Batch and Continuous Processes, AIChE Journal, 56(7): 1845-1858.
52. Chew, I. M. L., Foo, D. C. Y., Ng, D. K. S., and Tan, R. R. (2010). Flowrate Targeting Algorithm forInterplant Resource Conservation Network. Part 1 – Unassisted Integration Scheme. Industrial &Engineering Chemistry Research, 49(14): 6439-6455.
6
53. Chew, I. M. L., Foo, D. C. Y. and Tan, R. R. (2010). A New Flowrate Targeting Algorithm forInterplant Resource Conservation Network. Part 2 – Assisted Integration Scheme. Industrial &Engineering Chemistry Research, 49(14): 6456-6468.
54. Foo, D. C. Y. (2010). Letter to Editor. AIChE Journal, 56 (9): 2492-2494.55. Gouws, J., Majozi, T., Foo, D. C. Y., Chen, C. L. and Lee, J.-Y., (2010). Water Minimisation
Techniques for Batch Processes. Industrial & Engineering Chemistry Research, 49(19), 8877-8893.56. Foo, D. C. Y. (2010). Automated Targeting Technique for Batch Process Integration. Industrial &
Engineering Chemistry Research, 49(20), 9899-9916.57. Chen, C. L., Lee, J.-Y., Ng, D. K. S., and Foo, D. C. Y. (2010). Synthesis of Resource Conservation
Network with Sink-Source Interaction. Clean Technologies and Environmental Policy, 12(6): 613-625.
58. Tan, R. R., Ng, D. K. S. Foo, D. C. Y. and Aviso, K. B. (2010). Crisp and Fuzzy Integer ProgrammingModels for Optimal Carbon Sequestration Retrofit in the Power Sector. Chemical EngineeringResearch and Design, 88(12): 1580-1588.
59. Chew, I. M. L., Thillaivarrna, S. L., Tan, R. R. and Foo, D. C. Y. (2011). Analysis of Inter-plant WaterIntegration with Indirect Integration Schemes through Game Theory Approach – Pareto OptimalSolution with Interventions. Clean Technologies and Environmental Policy, 13(1): 49-62.
60. Aviso, K. B. Tan, R. R., Culaba, A. B., Foo, D. C. Y., Hallale, N. (2011). Fuzzy Optimization ofTopologically Constrained Eco-Industrial Resource Conservation Networks with IncompleteInformation. Engineering Optimisation, 43(3): 257-279.
61. Saw, S. Y., Lee, L., Lim, M. H., Foo, D. C. Y., Chew, I. M. L., Tan, R. R. and Klemeš, J. (2011). AnExtended Graphical Targeting Technique for Direct Reuse/Recycle in Concentration- and Property-Based Resource Conservation Networks. Clean Technologies and Environmental Policy, 13(2): 347-357.
62. Wong W. H., Foo, D. C. Y. and Tan, R. R., (2011). Chronologically Constrained Composite Curvesfor Carbon Constrained Agricultural Planning. Biomass & Bioenergy, 35(5): 1716-1720.
63. Nun, S., Tan, R. R., Razon, L. F., Foo, D. C. Y. and Egashirad, R. (2011). Fuzzy AutomatedTargeting for Trade-Off Analysis in Batch Water Networks, Asia-Pacific Journal of ChemicalEngineering Journal, 6(3): 537-551.
64. Chen, C. L., Lee, J.-Y., Ng, D. K. S., and Foo, D. C. Y. (2011). Property Integration for ResourceConservation Network Synthesis in Palm Oil Mills. Chemical Engineering Journal, 169 (1-3): 207-215
65. Chen, C. L., Lee, J.-Y., Ng, D. K. S., and Foo, D. C. Y. (2011). Synthesis of Property-basedResource Conservation Network in Palm Oil Mills with Time-varying Process Disturbance. CleanTechnologies and Environmental Policy, 13(4): 625-632.
66. Deng, C., Feng, X., Ng, D. K. S., and Foo, D. C. Y. (2011). Process-based Graphical Approach forSimultaneous Targeting and Design of Water Network, AIChE Journal, 57(11): 3085-3104.
67. Alshekhli, O., Foo, D. C. Y., Hii, C. L. and Law, C. L. (2011). Process Simulation andDebottlenecking for An Industrial Cocoa Manufacturing Process. Food and Bioproducts Processing89(4): 528-536.
68. Khor, C. S., Foo, D. C. Y., El-Halwagi, M. M., Tan, R. R. and Shah, N. (2011). A SuperstructureOptimization Approach for Membrane Separation-Based Water Regeneration Network Synthesis withDetailed Nonlinear Mechanistic Reverse Osmosis Model. Industrial & Engineering ChemistryResearch: 50(23), 13444-13456.
69. Safri, N. H. M., Mel, M., Foo, D. C. Y., Ng, D. K. S. and Chew, I, M. L. (2012). Process modelling anddebottlenecking study of a vaccine production, IIUM Engineering Journal, Vol. 13(1): 97-107.
70. Chew, I. M. L., Foo, D. C. Y., Bonhivers, J.-C., Stuart, P., Alva-Argaez, A. Savulescu, L. E., (2012), AModel-based Approach for Simultaneous Water and Energy Reduction in a Pulp and Paper MillApplied Thermal Engineering, 51(1–2): 393-400.
71. Tan, R. R., Lam, H. L., Kasivisvanathan, H., Ng, D. K. S., Foo, D. C. Y., Abdul Aziz, M. K., Hallale,N., Klemeš, J. J. (2012). An Algebraic Approach to Identifying Bottlenecks in Linear Process Modelsof Multi-Functional Energy Systems. Theoretical Foundations of Chemical Engineering, 46(6): 642-650.
72. Soo, S. S. T., Toh, E. L., Yap, K. K. K., Ng, D. K. S. and Foo, D. C. Y. (2013). Synthesis oDecentralised Wastewater Treatment Networks for One- and Two-Contaminant Systems. ChemicalEngineering Research and Design, 91(1): 106–119.
73. Hortua, A. C., El-Halwagi, M. M., Ng, D. K. S., and Foo, D. C. Y. (2013). An Integrated Approach forSimultaneous Mass and Property Integration. Sustainable Chemistry and Engineering, 1(1), 29–38.
74. Foo, D. C. Y. (2013). A Generalised Guideline for Process Changes for Resource ConservationNetworks. Clean Technologies and Environmental Policy, 15(1), 45-53.
7
75. Tan, Y. L., Ng, D. K. S., El-Halwagi, M. M., Foo, D. C. Y., Samyudia, Y. (2013). Synthesis of HeatIntegrated Resource Conservation Networks with Varying Operating Parameters. Industrial &Engineering Chemistry Research, 52(22): 7196-7210.
76. Diamante, J. A. R., Tan, R. R., Foo, D. C. Y., Ng, D. K. S., Aviso, K. B., Bandyopadhyay, S. (2013). AGraphical Approach to Pinch-Based Source-Sink Matching and Sensitivity Analysis in CarbonCapture and Storage Systems. Industrial & Engineering Chemistry Research, 52(22): 7211-7222.
77. Foo, D. C. Y., Tan, R. R., Lam H. L., Kamal, M., Klemeš, J. J. (2013). Robust Models for theSynthesis of Flexible Palm Oil-Based Regional Bioenergy Supply Chain. ENERGY, 55: 68-73.
78. Lee, J.-Y. Chen, C.-L., Wen, T. L., Ng, D. K. S., Foo, D. C. Y. and Wang, T.-C. (2013). Synthesis andDesign of Chilled Water Networks Using Mathematical Optimization. Applied Thermal Engineering58 (2013) 638-649.
79. Ooi, R. E. H., Foo, D. C. Y., Tan, R. R., Ng, D. K. S. and Smith, R. (2013). Carbon ConstrainedEnergy Planning (CCEP) for Sustainable Power Generation Sector with Automated Targeting ModelIndustrial & Engineering Chemistry Research, 52: 9889−9896.
80. Foo, D. C. Y., Lee, J.-Y., Ng, D. K. S., and Chen, C. L. (2013). Targeting and Design for BatchRegeneration and Total Networks. Clean Technologies and Environmental Policy, 15(4):579-590.
81. Ooi, R. E. H., Foo, D. C. Y., Ng, D. K. S. and Tan, R. R. (2013). Planning of Carbon Capture andStorage with Pinch Analysis Techniques. Chemical Engineering Research and Design, 91(12): 2721-2731.
82. Ooi, R. E. H., Foo, D. C. Y. and Tan, R. R. (2014). Targeting for Carbon Sequestration RetrofitPlanning in the Power Generation Sector for Multi-Period Problems. Applied Energy, 113, 477-487.
83. M. F. Kamuri, Foo, D. C. Y. and Mel, M. (2013). Batch Process Modelling and Economic Evaluationof Glucuronidase Enzyme Production, Journal of Bioprocessing & Biotechniques (in press).
84. Sahu, G. C., Bandyopadhyay, S., Foo, D. C. Y., Ng, D. K. S., and Tan, R. R. (2013). Targeting forOptimal Grid-Wide Deployment of Carbon Capture and Storage (CCS) Technology. Process Safetyand Environmental Protection (in press).
85. Tan, Y. L., Ng, D. K. S., Foo, D. C. Y., El-Halwagi, M. M., Samyudia, Y. (2013). Floating PinchTechnique for Utility Targeting in Heat Exchanger Network (HEN), Chemical EngineeringResearch and Design (in press).
86. Chen, C.-L., Chun-Yen Lin, Lee, J.-Y. and Foo, D. C. Y. (2013). A Two-Stage Approach for theSynthesis of Inter-Plant Water Networks Involving Continuous and Batch Unit. Chemical EngineeringResearch and Design (in press).
87. Ng, D. K. S., Chew, I. M. L., Tan, R. R., Foo, D. C. Y., Ooi, M. B. L., El-Halwagi, M. M. (2013).RCNet: An Optimisation Software for the Synthesis of Resource Conservation Networks. ProcessSafety and Environmental Protection (in press).
88. Diamante, J. A. R., Tan, R. R., Foo, D. C. Y., Ng, D. K. S., Aviso, K. B., Bandyopadhyay, S. (2013).Unified Pinch Approach for Targeting of Carbon Capture and Storage (CCS) Systems with MultipleTime Periods and Regions. Journal of Cleaner Production (in press).
89. He, Y. -J., Zhang, Y., Ma, Z. -F., Sahinidis, N. V., Tan, R. R., Foo, D. C. Y. (2013), Optimal Source-Sink Matching in Carbon Capture and Storage Systems under Uncertainty. Industrial & EngineeringChemistry Research (in press).
Magazines1. Foo, D. C. Y., Manan, Z. A., Selvan, M., and McGuire, M. L. (2005). Integrate Process Simulation and
Process Synthesis, Chemical Engineering Progress, 101(10): 25-29 (October 2005).2. Aziz, R. A., Sarmidi, M. R., Kumaresan, S., and Foo, D. C. Y. (2005). Engineering Aspects of Herbal
and Phytochemical Processing: A Malaysian Perspective, JURUTERA - The Monthly Bulletin of TheInstitution of Engineers, Malaysia (IEM), 2005(12): 10-19 (December 2005).
3. Foo, D. C. Y. (2006). Use Process Integration to Set Reuse and Recycling Targets, Bulletin ofInstitution of Engineers, Malaysia (IEM), 2006(4): 8-14 (April 2006).
4. Foo, D. C. Y., Manan, Z. A. and Tan, Y. L. (2006), Use Cascade Analysis to Optimize WaterNetworks, Chemical Engineering Progress, 102(7): 45-52 (July 2006).
5. Tan, J., Foo, D. C. Y., Kumaresan, S. and Aziz, R. A. (2006). Debottlenecking of a BatchPharmaceutical Cream Production, Pharmaceutical Engineering, July/August 2006, 72-84.
6. Tan, J., Foo, D. C. Y., Kumaresan, S. and Ramlan, A. A. (2008). Evaluation of PharmaceuticalProduction Expansion Plan via Batch Process Simulation, JURUTERA - The Monthly Bulletin of TheInstitution of Engineers, Malaysia (IEM), 2008(11): 16-19 (November 2008).
7. Foo, D. C. Y., Hallale, N. and Tan, R. R. (2010). Optimize Shift Scheduling Using Pinch Analysis.Chemical Engineering, July 2010: 48-52.
8
8. Foo, D. C. Y. (2013). Resource Conservation with Process Integration. Chemical TechnologyFebruary 2013: 30-33.
9. Lim, J. S. H., Foo, D. C. Y., Ng, D. K. S., Aziz, R. and Tan, R. R. (2013). Pinch Analysis forProduction Planning in Manufacturing Industries, Chemical Engineering, August 2013, 40-45.
Plenary/Keynote Presentation (Research Conferences)1. Aziz, R. A., Kumaresan, S., Taher, Z. M. and Foo, D. C. Y., (2003). Phytochemical Processing: The
Next Emerging Field in Chemical Engineering: Aspects and Opportunities, International Conferenceon Chemical and Bioprocess Engineering (ICCBPE 2003), Sabah.
2. Foo, D. C. Y. (2006). Targeting the Minimum Number of Units and Network Evolution Techniques fora Batch Heat Exchanger Network, 9
thConference on Process Integration, Modelling and Optimisation
for Energy Saving and Pollution Reduction (PRES 2006) in conjunction with 17th
InternationalCongress of Chemical and Process Engineering (CHISA), Prague, Czech Republic.
3. Ng, D. K. S., Rabie, A., El-Halwagi, M. M., and Foo, D. C. Y. (2007). Simultaneous Synthesis oProperty-Based Water Reuse/Recycle and Interceptions Networks for Batch Processes, 10
th
Conference on Process Integration, Modelling and Optimisation for Energy Saving and PollutionReduction (PRES 2007), Italy.
4. Foo, D. C. Y. (2008). On Pinch-Based Review for Water Network Synthesis – From Fixed Load toFixed Flowrate Problems, 11
thConference on Process Integration, Modelling and Optimisation for
Energy Saving and Pollution Reduction (PRES 2008) in conjunction with 18th
International Congressof Chemical and Process Engineering (CHISA), Prague, Czech Republic.
5. Klemeš, J., Lam, H. L. and Foo, D. C. Y. (2009). Water recycling & recovery, Total Food 2009,Norwich, UK. (Plenary Lecture)
6. Lee, J.-Y., Chen, C.-L., Ng, D. K. S., and Foo, D. C. Y. (2009). Synthesis of the Property-BasedWater-Using Networks in Batch Process Industries, 12th Conference on Process Integration, Modellingand Optimisation for Energy Saving and Pollution Reduction (PRES 2009), Rome, Italy.
7. Klemeš, J., Lam, H. L. and Foo, D. C. Y. (2009). Water Minimisation, Recycling and Recovery –Implementation to the Process Industry, Slovenian Chemical Days 2009, Slovenia.
8. Tan, R. R., Ng, D. K. S., Foo, D. C. Y., Aviso, K. B. (2009). Optimal Deployment of Carbon DioxideCapture in the Power Sector Using Fuzzy Boolean Programming, Regional Symposium on ChemicalEngineering (RSCE 2009), Philippines.
9. Foo, D. C. Y. and Tan, R. R. (2010). Recent Trends In Process Integration Techniques for Emissionand Environmental-Footprint Problems. The 5th International Symposium on Design, Operation andControl of Chemical Processes (PSE Asia 2010), Singapore.
10. Foo, D. C. Y. Gouws, J., Majozi, T., Lee, J.-Y., Chen, C.-L., (2010). A State-of-the-Art Review onPinch Analysis Techniques for the Synthesis of Batch Water Network. 13th Asia Pacific Confederationof Chemical Engineers (APCChE 2010), Taiwan.
11. Foo, D. C. Y. (2011). Process Integration Techniques for CO2 Mitigation. International Conference onAdvances in Energy Research (ICAER2011), Mumbai, India.
12. Foo, D. C. Y. (2012). Waste and Carbon Footprint Reduction with Process Integration. InternationalConference on Process Engineering & Advanced Materials (ICPEAM 2012), Kuala Lumpur.
13. Ooi, R. E. H., Foo, D. C. Y., Ng, D. K. S., Tan, R. R. (2012). Graphical Targeting Tool for the Planningof Carbon Capture and Storage, 15
thConference on Process Integration, Modelling and Optimisation
for Energy Saving and Pollution Reduction (PRES 2012) in conjunction with 20th
InternationalCongress of Chemical and Process Engineering (CHISA), Prague, Czech Republic.
Keynote/Invited Speech (Commercial/Trade Conferences)1. Aziz, R. A., and Foo, D. C. Y., (2006). Phytochemical Process Optimisation of Herbal Extraction for
Bioactive Components, 3rd Asia Pacific Natural Product Expo (NATPRO 2006), Kuala Lumpur.2. Papavasileiou, V. and Foo, D. C. Y. (2008). Analysis & Optimization of Monoclonal Antibodies
Production Facilities with Simulation & Scheduling Tools, Technology Transfer for BiopharmaceuticalsAsia, Singapore.
3. Foo, D. C. Y. (2009). Leveraging on Water Pinch Analysis (WPA) to Maximise Water Recovery &Cost Savings in Industrial Plants. Plant Integrity Management Conference, Jakatra, Indonesia.
4. Foo, D. C. Y. (2010). Optimizing Resource Conservation for Process Plant with Process Integration,Process Plant Debottlenecking and Optimisation, Kuala Lumpur.
5. Foo, D. C. Y. (2012). Process Integration – A Promising Tool for Optimising Process Plant ResourcesTotal Plant Management, Kuala Lumpur.
9
6. Foo, D. C. Y. (2013). Productivity Enhancement and Resource Conservation With Process IntegrationTechniques. Seminar on Excellence in Manufacturing.
International Conferences1. Lim, L. P., Ripin, A., Yunus, R. M. and Foo, D. C. Y., (2000). Re-refining of Base Oil from Used
Lubricant Oil: A Method to Formulate Efficient Potassium Hydroxide (KOH) Effect, paper presented inRegional Symposium on Chemical Engineering (RSCE 2000), National University of Singapore.
2. Tan, Y. L., Manan, Z. A. and Foo, D. C. Y., (2002) Water Minimisation by Pinch Technology – WaterCascade Table for Minimum Water and Wastewater Targeting, paper presented in 9th Asian PacificConfederation of Chemical Engineering (APCChE 2002), New Zealand (Best Working Paper fromMalaysia).
3. Foo, D. C. Y., Manan, Z. A., Yunus, R. M., Aziz, R. A. and Tan, Y. L., (2002) Water Minimisation forBatch Process Systems – A Pinch Technology Approach, paper presented in 2
ndWorld Engineering
Congress (WEC 2002), Sarawak.4. Foo C. Y., Yunus, R. M., Tea, S. S., (2002). Modeling and Simulation of Used Lubricant Oil Re-
refining Process, paper presented in 2nd
World Engineering Congress (WEC 2002), Sarawak.5. Chow, A. W., Foo C. Y., Yunus, R. M., Aziz, R. A. and Manan, Z. A., (2002). Pilot Scale Rectification
Column Modelling and Design for The Separation of Fatty Acid Mixture, paper presented in RegionalSymposium on Chemical Engineering (RSCE 2002), Kuala Lumpur.
6. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2002). Synthesis of Mass ExchangeNetwork for Batch Process Systems. Part 1: Calculation of Utility Targets, paper presented inRegional Symposium on Chemical Engineering (RSCE 2002), Kuala Lumpur.
7. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A. (2003). Synthesis of Mass ExchangeNetwork for Batch Processes. Part 2: Batch Network Design, paper presented in InternationalConference on Chemical and Bioprocess Engineering (ICCBPE 2003), Sabah.
8. Foo, D. C. Y., Manan, Z. A. and Aziz, R. A. (2003). Water Cascade Analysis Technique for MinimumFlowrate Targeting: Tabular and Numerical Approach, paper presented in International Conference onChemical and Bioprocess Engineering (ICCBPE 2003), Sabah.
9. Foo, D. C. Y., Manan, Z. A. and Aziz, R. A. (2003). Synthesis of Maximum Water Recovery Networkfor Batch Process Systems, paper presented in 6
thConference on Process Integration, Modelling and
Optimisation for Energy Saving and Pollution Reduction (PRES 2003) in conjunction with 53rd
Canadian Chemical Engineering Conference, Hamilton, Canada.10. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A. (2003). Synthesis of Mass Exchange
Network for Batch Process Systems. Part 3: Targeting and Design for Network with Mass StorageSystem, paper presented in AIChE Annual Meeting 2003, San Francisco.
11. Manan, Z. A. and Foo, D. C. Y. (2003). Setting Targets for Water and Hydrogen Networks UsingCascade Analysis, paper presented in AIChE Annual Meeting 2003, San Francisco.
12. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A. (2003). Synthesis of Mass ExchangeNetwork for Batch Process Systems. Part 4: Minimum Units Targeting and Network Evolution, paperpresented in to Regional Symposium on Chemical Engineering (RSCE 2003), Manila.
13. Foo, D. C. Y., Manan, Z. A., Kazantzi, V., Almutlaq, A. M. and El-Halwagi, M. M. (2004). Material-Reuse Targeting Using Property-Based Surplus Technique, paper presented in 4th InternationalSymposium on Process Integration in conjunction with 54th Canadian Chemical EngineeringConference, Calgary, Canada.
14. Kazantzi, V., Foo, D. C. Y., Manan, Z. A., Almutlaq, A. M. and El-Halwagi, M. M. (2004). ResourceConservation and Waste Minimization for Property Networks Using Cascade Analysis, paperpresented in AIChE Annual Meeting 2004, Austin, Texas.
15. Tan, J., Foo, D. C. Y., Kumaresan, S., Aziz, R. A., Koulouris, A. (2004). Evaluation of DebottleneckingStrategies for A Liquid Medicine Production Utilising Batch Process Simulation, paper presented inInternational Conference of Computational Methods in Sciences and Engineering 2004 (ICCMSE2004), Attica, Greece.
16. Athimulam, A., Kumaresan, S., Foo, D. C. Y., Sarmidi, M. R. and Aziz, R. A. (2005). Modelling andOptimisation of Tongkat Ali Water Extract Production Utilising A Batch Process Simulator, paperpresented in 2nd International Conference on Humanoid, Nanotechnology, Information Technology,Communication and Control, Environment, and Management (HNICEM 2005), Manila, Philippines.
17. Foo, D. C. Y. and Manan, Z. A. (2005), Setting Right Targets for Water Recovery Network UsingWater Cascade Analysis Technique, paper presented in 2nd International Conference on Humanoid,Nanotechnology, Information Technology, Communication and Control, Environment, andManagement (HNICEM 2005), Manila, Philippines.
10
18. Tan, J., Foo, D. C. Y., Kumaresan, S., Aziz, R. A., (2005). Evaluation of Pharmaceutical CreamProduction Debottlenecking Schemes, paper presented in Process System Engineering (PSE Asia2005), Seoul, Korea.
19. Kazantzi, V., Qin, X., Foo, D. C. Y. and El-Halwagi, M. M. (2005). Pollution Prevention throughProperty-Based Design, paper presented in AIChE Annual Meeting 2005, Cincinnati, Ohio.
20. Foo, D. C. Y. and Manan, Z. A. (2005), Optimisation of Regeneration Unit to Achieve Zero Dischargein A Paper Mill, paper presented in the 2nd International Conference on Chemical and BioprocessEngineering (ICCBPE 2005), Sabah.
21. Chan, J. H., Foo, D. C. Y., Kumaresan, S., Aziz, R. A. and Hassan, M. A. A. (2005), ProcessModelling of A PVC Production Plant, paper presented in the 2nd International Conference onChemical and Bioprocess Engineering (ICCBPE 2005), Sabah.
22. Kuan, C. K., Foo, D. C. Y., Kumaresan, S., Aziz, R. A. and Tan, R. R. (2005), Life Cycle Analysis ofTongkat Ali (Eurycoma Longifolia) Extract Manufacturing Process, poster presented in the 2ndInternational Conference on Chemical and Bioprocess Engineering (ICCBPE 2005), Sabah.
23. Foo, D. C. Y., Kumaresan, S., Aziz, R. A. and Sarmidi, M. R. (2005), The Use of Computer-AidedProcess Design and Simulation Tools in Undergraduate Research Projects, paper presented inRegional Conference on Engineering Education (RCEE 2005), Johor Bahru.
24. Foo, D. C. Y. (2006). Water Cascade Analysis Technique for Targeting Minimum Water Flowrates inThreshold Problems, paper presented in the 9th Conference on Process Integration, Modelling andOptimisation for Energy Saving and Pollution Reduction (PRES 2006) in conjunction with 17
th
International Congress of Chemical and Process Engineering (CHISA), Praha, Czech Republic.25. Tan, J., Foo, D. C. Y., Sivakumar, K. and Aziz, R. A. (2006). Debottlenecking of a Batch
Pharmaceutical Eye Drop Production, paper presented in the 9th
Conference on Process Integration,Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2006) in conjunctionwith 17
thInternational Congress of Chemical and Process Engineering (CHISA), Praha, Czech
Republic.26. Foo, D. C. Y. and Manan, Z. A. (2006). Targeting for Utility Gases Reuse/Recycle via Process
Integration, paper presented in International Conference on Environment (ICENV2006).27. Chiang, C. L. and Foo, D. C. Y. (2006). Application of Source Shifts Algorithm in Retrofitting Existing
Water Network in a Paper Mill, paper presented in International Conference on Environment(ICENV2006).
28. Ng, D. K. S., Foo, D. C. Y., Kazantzi, V. and El-Halwagi, M. M. (2006). Cascade Analysis Techniquefor Targeting Property-Based Material Reuse/Recycle Network, paper presented in AIChE AnnualMeeting 2006, San Francisco.
29. Ng, D. K. S., Foo, D. C. Y., Tan, R. R. and Tan, Y. L. (2006). Targeting for Total Water NetworkBased on Pinch Analysis, paper presented in AIChE Annual Meeting 2006, San Francisco.
30. Hul, S., Tan, R. R., Auresenia, J., Fuchino, T. and Foo, D. C. Y. (2006). Application of Particle SwarmOptimization in Material Reuse/Recycle Network Topology, paper presented in Regional Symposiumon Chemical Engineering (RSCE 2006), Singapore.
31. Ng, D. K. S. and Foo, D. C. Y. (2006). A Systematic Approach for Water Network Evolution byImproved Source Shift Algorithm, paper presented in 2006 Symposium on Process SystemEngineering, Taiwan.
32. Chiang, C. L., Hul, S., Ng, D. K. S., Tan, R. R. and Foo, D. C. Y. (2006). A Linear Programming Modelfor Retrofit A Paper Mill Plant, paper presented in 2006 Symposium on Process System EngineeringTaiwan.
33. Foo, D. C. Y. and Tan, R. R. (2007). Targeting for Minimum Low and Zero-Carbon Energy Resourcesin Carbon-Constrained Energy Sector Planning Using Cascade Analysis, paper presented in the 10th
Conference on Process Integration, Modelling and Optimisation for Energy Saving and PollutionReduction (PRES 2007).
34. Y. L. Tan, Foo, D. C. Y., Tan, R. R. and Ng, D. K. S. (2007). Approximate Graphical Targeting forWater Network with Two Contaminants, paper presented in the 10th Conference on ProcessIntegration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2007).
35. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2007). Waste Streams Identification for Water Networkpaper presented in the 10
thConference on Process Integration, Modelling and Optimisation for Energy
Saving and Pollution Reduction (PRES 2007).36. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2007). Interaction between Water Regeneration and
Waste Treatment for Total Water Network, paper presented in Process System Engineering (PSEAsia 2007), Xi’an, China
11
37. Chew, I. M. L., Ng, D. K. S. and Foo, D. C. Y. (2007). Graphical Targeting for Plant-Wide WaterIntegration, paper presented in Joint Symposium for Chemical and Metallurgical Engineering, SouthAfrica.
38. Rabie, A., El-Halwagi, M. M., Foo, D. C. Y. and Ng, D. K. S. (2007). Optimal Synthesis, Scheduling,And Operation of Batch Water-Recycle Networks with Interception, paper presented in AIChE AnnualMeeting 2007, Salt Lake City.
39. Chew, I, M. L., Tan, R. R., Foo, D. C. Y. and Chiu, A. S. F. (2007). Game Theory Approach to theAnalysis of Eco-Industrial Water Conservation, Reuse and Recycle Networks, paper presented in theInternational Conference on Hydrology and Water Resources Management for Hazard Reduction andSustainable Development (HRSD 2007), Manila, Philippines.
40. Shoaib, A. M., Aly, S. M., Awad, M. E., Foo, D. C. Y. and El-Halwagi, M. M. (2007). Combined Pinchand Mathematical Optimization Approaches for the Synthesis of Batch Water Network, paperpresented in The 7th Egyptian Syrian Conference in Chemical and Petroleum Engineering, Suez,Egypt.
41. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2008). Automated Targeting Technique for ResourceConservation Networks, paper presented in ASIA WATER 2008 Conference, Kuala Lumpur.
42. Chew, I, M. L., Ng, D. K. S., Foo, D. C. Y., Tan, R. R., Majozi, T. and Gouws, J. (2008). Synthesis ofInter-Plant Water Network, paper presented in ASIA WATER 2008 Conference, Kuala Lumpur.
43. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2008). Automated Targeting Technique for SegregatedEnergy Planning, paper presented in EMINENT (Early Market Introduction of New ENergyTechnologies) Workshop, Veszprem, Hungary.
44. Deng, C., Feng, X., Ng, D. K. S. and Foo, D. C. Y. (2008). Process-based Graphical Approach (PGA)for Simultaneous Targeting and Design of Regeneration Recycling Water Networks, paper presentedin the 12
thAsia Pacific Confederation of Chemical Engineers (APCChE 2008), Dalian, China.
45. Tan, Y. L., Pau, C. H., Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2008). Automated Targeting forProperty Integration, paper presented in AIChE Annual Meeting 2008, Philadelphia.
46. Thillaivarrna, S. L., Chew, I, M. L., Foo, D. C. Y. and Tan, R. R. (2008). Game Theory Approach to theAnalysis of Inter-plant Water Integration, paper presented in the 15th Regional Symposium onChemical Engineering (RSCE 2008), Kuala Lumpur.
47. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2008). Automated Targeting Technique for Total WaterNetwork, paper presented in the 15th Regional Symposium on Chemical Engineering (RSCE 2008)Kuala Lumpur.
48. Chew, I, M. L., Ng, D. K. S., Foo, D. C. Y., Tan, R. R., Majozi, T. and Gouws, J. (2008). Synthesis ofIndirect Inter-Plant Water Network with Regeneration Unit, paper presented in the 15
thRegional
Symposium on Chemical Engineering (RSCE 2008), Kuala Lumpur.49. Leong, M, K. Y., Ng, D. K. S. and Foo, D. C. Y. (2008). Targeting for Hybrid Chilled and Cooling
Water System, paper presented in the 15th Regional Symposium on Chemical Engineering (RSCE2008), Kuala Lumpur.
50. Mel, M., Salleh, H. M., Foo, D. C. Y. and Kamuri, M. F. (2008). Batch Process Modelling andEconomic Analysis of Glucuronidase Enzyme Production, paper presented in the 15
thRegional
Symposium on Chemical Engineering (RSCE 2008), Kuala Lumpur.51. Chew, I, M. L., Foo, D. C. Y., Mazlan, M. M. and Ho, P. Y. C. Inter-Plant Water Integration: A Case
Study for a Malaysia Integrated Iron and Steel Mill, paper presented in the International Conferenceon Environment (ICENV2008), Penang, Malaysia.
52. Shoaib, A. M., Aly, S. M., Awad, M. E., Foo, D. C. Y. and El-Halwagi, M. M. (2009). A MathematicalOptimisation Approach for Batch Water Network Synthesis with Multi-Contaminant Problems, paperpresented in the 11th International Conference on Mining, Petroleum and Metallurgical Engineering(MPM11), Suez Canal University, Egypt.
53. Tan, R. R. and Foo, D. C. Y. (2009). Recent Trends in Pinch Analysis for Carbon Emissions andEnergy Footprint Problems, paper presented in the 12
thConference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution Reduction (PRES 2009), Rome, Italy.54. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2009). Automated Targeting for Resource Conservation
Network with Interception Placement, paper presented in the 12th
Conference on Process Integration,Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2009), Rome, Italy.
55. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2009). Automated targeting for total property network withBilateral Constraints, paper presented in the Seventh International Conference on the Foundations ofComputer-Aided Process Design (FOCAPD 2009), Colorado, US.
56. Lovelady, E. M., El-Halwagi M. M., Chew, I, M. L., Ng, D. K. S. Foo, D. C. Y. and Tan, R. R. (2009). AProperty-Integration Approach to the Design and Integration of Eco-Industrial Parks, paper presented
12
in the Seventh International Conference on the Foundations of Computer-Aided Process Design(FOCAPD 2009), Colorado, US.
57. Ng, D. K. S., Foo, D. C. Y. Tan, R. R., El-Halwagi, M. M. (2009). Automated Targeting for TotalProperty-based Network, paper presented in the 19
thEuropean Symposium on Computer Aided
Process Engineering (ESCAPE-19).58. Chew, I. M. L., Foo, D. C. Y., Ng, D. K. S., Tan, R. R., Saw, S. Y., Lee, L., Lim, M. H., Klemeš, J. and
El-Halwagi, M. M. (2009). Flowrate targeting for inter-plant water network. 8th World Congress ofChemical Engineering (WCCE), Montreal, Canada.
59. Tan, R. R., Ng, D. K. S. and Foo, D. C. Y. (2009). An Optimization Model for Optimal CarbonSequestration Retrofit in the Power Sector, paper presented in the 3rd International Conference onChemical and Bioprocess Engineering (ICCBPE 2009), Sabah.
60. Saw, S. Y., Lee, L., Lim, M. H., Foo, D. C. Y., Chew, I. M. L., Onyedim, V. F. O., Tan, R. R., Klemeš, J.(2009). A New Graphical Targeting Procedure for Water Minimisation, paper presented in the 3rdInternational Conference on Chemical and Bioprocess Engineering (ICCBPE 2009), Sabah.
61. Ch’ng, P. K., Wong, W. H., Pitchaimuthu, D., Tjan, W., Foo, D. C. Y. and Tan, R. R. (2009). PinchAnalysis Approach to Carbon-Constrained Planning for Carbon Sequestration Retrofit in the PowerSector, paper presented in the 3rd International Conference on Chemical and Bioprocess Engineering(ICCBPE 2009), Sabah.
62. Aviso, K. B. Tan, R. R., Culaba, A. B., Foo, D. C. Y., Hallale, N. (2009). Designing Eco-IndustrialResource Conservation Networks Using Fuzzy Mixed Integer Linear Programming, paper presentedin the 3rd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2009), Sabah.
63. Mel, M., Safri, N. H. M., Foo, D. C. Y., Ng, D. K. S. and Chew, I. M. L. (2009). Process Modeling andDebottlenecking Study of a Vaccine Production, paper presented in CHEMECA 2009, Perth, Australia
64. Aviso, K. B. Tan, R. R., Culaba, A. B., Foo, D. C. Y., (2009). Designing Property Based MaterialExchange Networks in Eco-Industrial Parks Using Fuzzy Mixed Integer Linear Programming, paperpresented in the 11th Science and Technology Congress, Manila, Philippines.
65. Saw, S. Y., Lee, L., Lim, M. H., Foo, D. C. Y., Chew, I. M. L., Tan, R. R. (2009). Targeting forResource Conservation Network with Material Surplus Composite Curves, paper presented in 2ndCUTSE International Conference.
66. Sahu, G. C., Bandyopadhyay, S., Foo, D. C. Y. and Tan, R. R. (2009). Optimised Multiple Designs forA Segregated Planning Water Using System, paper presented in the Advances in Energy Research(ICAER 2009), India.
67. Foo, D. C. Y., Ng, D. K. S., Tan, R. R. and Smith, R. (2010). Automated Targeting Technique toCarbon-Constrained Planning for Carbon Sequestration Retrofit in the Power Sector, paper presentedin the International Conference on Applied Energy (ICAE2010), Singapore.
68. Soo, S. S. T., Toh, E. L., Yap, K. K. K., Ng, D. K. S. and Foo D. C. Y. (2010).Targeting for MinimumFlowrate for Multiple Treatment Processes, paper presented in 1st International Congress on ProcessEngineering and Advanced Materials (ICPEAM2010), Kuala Lumpur.
69. Nun, S., Tan, R. R., Razon, L. F., Foo, D. C. Y. and Egashirad, R. (2010). Automated Targeting forBatch Water Network with Uncertainties, paper presented in Process System Engineering (PSE Asia2010), Singapore.
70. Chen, C. L., Lee, J.-Y., Ng, D. K. S., and Foo, D. C. Y. (2010). Synthesis of Resource ConservationNetwork for the Clay Bath System in Palm Oil Mills. 13
thConference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution Reduction (PRES 2010) in conjunction with 19th
International Congress of Chemical and Process Engineering (CHISA), Prague, Czech Republic.71. Lam H. L., Foo, D. C. Y., Kamal, M., Klemeš, J. J. (2010). Synthesis of Regional Energy Supply Chain
Based on Palm Oil Biomass. 13th Conference on Process Integration, Modelling and Optimisation forEnergy Saving and Pollution Reduction (PRES 2010) in conjunction with 19
thInternational Congress
of Chemical and Process Engineering (CHISA), Prague, Czech Republic.72. Tan, R. R., Aviso, K. B., Razon, L. F., Tay, D. H. S., Ng, D. K. S., Foo, D. C. Y. (2010). An Input-
Output Based MILP Model for Synthesis of Multifunctional Energy Systems with Life CycleConsiderations, paper presented in the 13th Asia Pacific Confederation of Chemical Engineers(APCChE 2010), Taiwan.
73. Ooi, R. E. H., Foo, D. C. Y. and Tan, R. R. (2011). Multi Period Planning on Grid-Wide CarbonSequestration Retrofit in Power Generation Sector with Pinch Analysis. Fourth InternationalConference on Modeling, Simulation and Applied Optimization (ICMSAO-2011), Kuala Lumpur.
74. Chew, I. M. L., Foo, D. C. Y., Lam H. L., Bonhivers, J.-C., Stuart, P., Savulescu, L. E., Alva-Argaez, A.(2011), Simultaneous Water and Energy Optimization for a Pump and Paper Mill, 14
thConference on
13
Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES2011), Florence, Italy (Chemical Engineering Transactions, 2011, 25, 441-446).
75. Chen, C. L., Lin, C.-Y., Lee, J.-Y. and Foo, D. C. Y. (2011). Synthesis of Inter-Plant Water NetworksInvolving Batch and Continuous Processes, 14
thConference on Process Integration, Modelling and
Optimisation for Energy Saving and Pollution Reduction (PRES 2011), Florence, Italy.76. Foo, D. C. Y., Tan, R. R., Lam H. L., Kamal, M., Klemeš, J. J. (2011). Synthesis of Flexible Palm Oil
Based Regional Energy Supply Chain. 21st European Symposium on Computer Aided ProcessEngineering (ESCAPE-21), Chalkidiki, Greece.
77. Lam H. L., Foo, D. C. Y., Ng, D. K. S., Hassim, M. H., Kamal, M. (2011). Integration of IndustrialWaste Oil, Biomass and Municipal Wastes into Malaysian Urban Area Energy Supply Chain. 6thDubrovnik Conference on Sustainable Development of Energy, Water and Environment SystemsDubrovnik.
78. V. F. O., Onyedim, Ng, D. K. S. and Foo, D. C. Y. and Tan, R. R. (2011). Retrofit of Water Network ina Chlor-alkali Plant, paper presented in the International Conference of Chemical Engineering andIndustrial Biotechnology (ICCEIB) in conjunction with the 21
stSymposium of Malaysian Chemical
Engineers (SOMChE 2011), Kuantan, Malaysia.79. Tan, R. R., Ooi, R. E. H., Foo, D. C. Y., Ng, D. K. S., Aviso K. B. and Bandyopadhyay, S. (2012). A
Graphical Approach to Optimal Source-Sink Matching in Carbon Capture and Storage Systems withReservoir Capacity and Injection Rate Constraints. Process System Engineering (PSE 2012),Singapore.
80. Chew, I. M. L., Foo, D. C. Y., Bonhivers, J.-C., Stuart, P., Alva-Argaez, A., Savulescu, L. E., (2012),Simultaneous Water and Energy Minimization for Brown Stock Washing System, Process SystemEngineering (PSE 2012), Singapore.
81. Tan, Y. L., Ng, D. K. S., El-Halwagi, M. M., Samyudia, Y., Foo, D. C. Y., Synthesis of Heat-IntegratedResource Conservation Networks, Process System Engineering (PSE 2012), Singapore.
82. Liew, W. H., Hassim M. H., Ng, D. K. S. and Foo, D. C. Y. (2012). Fuzzy Optimization for Screening ofSustainable Chemical Reaction Pathway Synthesis, 15th Conference on Process Integration,Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2012) in conjunctionwith 20
thInternational Congress of Chemical and Process Engineering (CHISA), Prague, Czech
Republic.83. Lee, S. H., Chew, I. M. L., Ng, D. K. S. and Foo, D. C. Y. (2012). Optimization of a Gasification-based
Integrated Biorefinery for Pulp and Paper Industry, CHEMECA 2012, New Zealand.84. Diamante, J. A., Tan, R. R., Ooi, R. E. H., Foo, D. C. Y., Ng, D. K. S., Aviso, K. B., Bandyopadhyay,
S. (2012). Graphical Uncertainty Analysis of Source-Sink Matching in Carbon Capture and StorageSystems, 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012) inconjunction with the 26th Symposium of Malaysian Chemical Engineers (SOMChE 2012), Sabah.
85. S. H. Lee, Ng, R. T. L. Ng, D. K. S., Foo, D. C. Y. and Chew, I. M. L., and (2013). Optimization of aGasification-based Integrated Biorefinery for Pulp and Paper Industry. Process System Engineering(PSE Asia 2013), Kuala Lumpur.
86. Diamante, J. A., Tan, R. R., Foo, D. C. Y., Ng, D. K. S., Aviso, K. B., Bandyopadhyay, S. (2013).Unified Graphical Pinch Approach for Targeting of Carbon Capture and Sequestration (CCS) Systemsover Multiple Time Periods. Process System Engineering (PSE Asia 2013), Kuala Lumpur.
87. Ooi, R. E. H., Foo, D. C. Y., Ng, D. K. S., Tan, R. R., Smith, R. (2013). Carbon Constrained EnergyPlanning (CCEP) with Consideration of Energy Security. Process System Engineering (PSE Asia2013), Kuala Lumpur.
88. Tan, Y. L., El-Halwagi, M. M., Samyudia, Y. Ng, D. K. S., Foo, D. C. Y., (2013). Heat IntegratedResource Conservation Networks without Mixing Prior to Heat Exchanger Networks. Process SystemEngineering (PSE Asia 2013), Kuala Lumpur.
89. J. S. W. Loo, R. T. L. Ng, D. K. S. Ng, J. K. Kim, Foo, D. C. Y., R. R. Tan, (2013). Targeting forCogeneration System and Steam Distribution Network. 9
thWorld Congress of Chemical Engineering
(WCCE) incorporating 15th Asia Pacific Confederation of Chemical Engineers (APCChE 2013), Seoul,Korea.
90. Majozi, T., Foo, D. C. Y., Ng, D. K. S., Lam, H. L., and Tan, R. R. (2013). Optimization of Heat andWater Use in Multipurpose Batch Plants, International Conference on Applied Energy (ICAE2013)Pretoria, South Africa.
91. Lam, H. L., Chong, F. K., Lawrence, K. K., Lim, P. P., Poon, M. C. Y. Foo, D. C. Y. (2013). CarbonCapture Storage Planning and Management. Sustainable Development Conference 2013, Bangkok.
14
92. Tapia, J. F. D., Tan, R. R. Ooi, R. E. H., and Foo, D. C. Y. (2013) Optimum Allocation of CO2 forGeological Sequestration and Enhanced Oil Recovery Operations. 6th AUN/SEED-Net RegionalConference on Chemical Engineering (6thRCCE), Manila.
National Conferences
93. Foo, D. C. Y., Lee, L. E. and Manan, Z. A., (2000). Application of Extractive Distillation for theSeparation of Benzene and Cyclohexane Mixture, paper presented in 14th Symposium of MalaysianChemical Engineers (SOMChE 2000), Bangi, Selangor.
94. Hishamuddin, E., Foo, D. C. Y., Yunus, R. M., Lim, L. P. and Ripin, A., (2001) Decolourization ofrecovered Base Oil from Used Lubricant Oil: A Study of Composite Adsorbent, paper presented in 15
th
Symposium of Malaysian Chemical Engineers (SOMChE 2001), Johor Bahru.95. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2002). Synthesis of Mass Exchange
Network for Batch Process Systems: Calculation of Utility Targets, paper presented in NationalScience Fellowship (NSF) Annual Workshop 2002, Kuala Lumpur (Silver Award for Best Presenter).
96. Foo, D. C. Y. (2003). A New Targeting Tool in Water Pinch Technology – The Water Cascade Tablepaper presented in SHELL Student Paper Presentation Contest (SSPEC 2003), UTM.
97. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2003). Maximising Water Recoverythrough Water Pinch Technology – The Use of Water Cascade Table, paper presented inEnvironment 2003, Batu Feringghi, Penang.
98. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2003). A Review on the State-of-the-art ofWater Minimisation Techniques Based on Pinch Technology, paper presented in Environment 2003,Batu Feringghi, Penang.
99. Manan, Z. A. and Foo, D. C. Y., (2003). Assessing Options for Process Changes via Water CascadeAnalysis, paper presented in 17
thSymposium of Malaysian Chemical Engineers (SOMChE 2003),
Pulau Pinang.100. Awang, M. R., Mutaat, H. H., Kumeresan, S., Foo, D. C. Y., Aziz, R. A., (2004). Economic
Assessment of Sterifeed Process, paper presented in R&D Seminar, Malaysian Institute for NuclearTechnology Research (MINT).
101. Tan, J., Foo, D. C. Y., Kumaresan, S., Aziz, R. A., (2004). Modelling, Optimisation andDebottlenecking of a Pharmaceutical Production Process Utilising a Batch Process Simulator, paperpresented in The Malaysian Society for Molecular Biology and Biotechnology Scientific Meeting(MSMBB 2004), Melaka.
102. Athimulam, A., Kumaresan, S., Foo, D. C. Y., Sarmidi, M. R., (2004). Modelling and Optimisation ofTongkat Ali Water Extract Production Utilising a Batch Process Simulator, paper presented in TheMalaysian Society for Molecular Biology and Biotechnology Scientific Meeting (MSMBB 2004),Melaka.
103. Foo, D. C. Y., Kazantzi, V., El-Halwagi, M. M. and Manan, Z. A., (2004). Graphical TargetingTechnique for Property-based Material Reuse Networks, paper presented in 18
thSymposium of
Malaysian Chemical Engineers (SOMChE 2004), Universiti Teknologi Petronas, Tronoh, Perak.104. Tan, R. R., Foo, D. C. Y. and Manan, Z. A. (2004). Assessing the Sensitivity of Water Reuse
Networks to Noisy Mass Loads Using Monte Carlo Simulation, paper presented in 18th Symposium ofMalaysian Chemical Engineers (SOMChE 2004), Universiti Teknologi Petronas, Tronoh, Perak.
105. Chew, Y. H., Foo, D. C. Y. and Lee, C. T. (2005). Evaluating Heat Integration Scheme for BatchProduction of Oleic Acid, paper presented in Malaysian Science and Technology Congress (MSTC2005), Kuala Lumpur.
106. Foo, D. C. Y., Manan, Z. A., Selvan, M. and McGuire, M. L. (2005). Flowsheet Synthesis by ProcessSynthesis and Simulation Tools, paper presented in Malaysian Science and Technology Congress(MSTC 2005), Kuala Lumpur.
107. Foo, D. C. Y. (2006). Flowrate Targeting for Multiple Fresh Water Sources using Water CascadeAnalysis, paper presented in the 20
thSymposium of Malaysian Chemical Engineers (SOMChE 2006),
Kuala Lumpur.108. Tan, Y. L., Foo, D. C. Y. and Tan, R. R. (2006). Minimum Flowrates Targeting for Multiple
Contaminants Water Network, paper presented in the 20th
Symposium of Malaysian ChemicalEngineers (SOMChE 2006), Kuala Lumpur.
109. Leong, Y. J., Lee, S. C., Low, K. W., Foo, D. C. Y. and R. R. Tan (2007). Process Integration forNon-Conventional Areas: Supply Chain Management and Carbon-Constrained Energy Planning,paper presented in Malaysian Science and Technology Congress (MSTC 2007), Subang.
15
110. Pau, C. H., Tan, Y. L., Ng, D. K. S. and Foo, D. C. Y. (2007). Property Integration Networks WithRegeneration Placement, paper presented in Curtin University of Technology Sarawak EngineeringConference (CUTSE 2007), Sarawak.
111. Yong, E. L. Z., Tan, Y. L., Chew, I. M. L., Foo, D. C. Y. and Ng, D.K.S. (2007). A Graphical approachfor simultaneous energy and water minimization, paper presented in Curtin University of TechnologySarawak Engineering Conference (CUTSE 2007), Sarawak.
112. Foo, D. C. Y., Ooi, M. B. L., Tan, R. R. and Tan, J. S. (2007). Optimum Production Planning inSupply Chain by Pinch Analysis Technique, paper presented in the 21st Symposium of MalaysianChemical Engineers (SOMChE 2007), Kuala Lumpur.
113. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2007). Waste Treatment Targeting for Water Network,paper presented in the 21
stSymposium of Malaysian Chemical Engineers (SOMChE 2007), Kuala
Lumpur.114. Chew, I. M. L., Ng, D. K. S. and Foo, D. C. Y. (2007). Flowrate Targeting for Plant-Wide Water
Integration, paper presented in the 21st
Symposium of Malaysian Chemical Engineers (SOMChE2007), Kuala Lumpur.
115. Chew, I. M. L., Ng, D. K. S. Foo, D. C. Y. and Subramaniam, M. (2007). Simultaneous Reduction ofEnergy and Water – A Special Case on Chilled Water Network Synthesis, paper presented in the 1st
Engineering Conference: Energy & Environment (EnCon07), Sarawak.116. Ng, D. K. S., Lee, S. C., Foo, D. C. Y. and Tan, R. R. (2007). Carbon Constrained Energy Planning
with Pinch Analysis, paper presented in the 1st
Engineering Conference: Energy & Environment(EnCon07), Sarawak.
117. Foo, D. C. Y. (2009). How much do Malaysian Students Know About Chemical Engineering BeforeEnrolling? Postgraduate Certificate Higher Education (PGCHE) conference, 17-20 Aug 2009,University of Nottingham Malaysia (reported in The Chemical Engineer, May 2010 issue, pp 56).
118. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2010). Automated Targeting for Total Water Network withFixed Removal Ratio Type Treatment System. The 1st IWA Malaysia Young Water ProfessionalsConference, Kuala Lumpur.
Patent filedMethod for Obtaining Base Oil from Spent Lubricant (Malaysian Patent Registration Number PI 20022454)
Research grant1. New Researchers’ Fund
Topic : Waste Minimisation for the Process Industry (NRF3822)Duration : May 2006 – April 2009Awarding body : University of Nottingham UKTotal amount : RM 136,500 (£21,048)
2. Science FundTopic : Development of Property Integration Techniques for Waste Minimisation (03-02-12
SF0018)Duration : September 2007 – August 2009Awarding body : Ministry of Science, Technology and Innovation, Malaysia (MOSTI)Total amount : RM 190,000
3. Long Term Research Grant Scheme (LRGS)Topic : Recovery of Mesocarp Oil from Palm Pressed Fibres and Reuse of Extracted
Mesocarp Fibres: Green Extraction Processes and Fibres Size Reduction Processesto Improve OER(Title for Research Program: Enhancing Productivity And Sustainability Of Palm OilMilling Industry)
Duration : June 2012 – May 2017Awarding body : Ministry of Higher Education, Malaysia (MOHE)Total amount : RM 12.446 Million
Research collaboratorsi. Prof Raymond Tan, De La Salle University-Manila, Philippinesii. Prof Mahmoud M. El-Halwagi, Texas A&M University, USiii. Prof Ramlan Abdul Aziz, Universiti Teknologi Malaysia, Malaysia
16
iv. Prof Feng Xiao, Xi’an Jiaotong University /China University of Petroleum-Beijing, Chinav. Prof Thokozani Majozi, University of Pretoria, South Africavi. Prof Santanu Bandyopadhyay, India Institute of Technology, Indiavii. Prof Jiří Klemeš, University of Pannonia, Hungary viii. Prof Robin Smith, University of Manchester, UKix. Prof Cheng-Liang Chen, National Taiwan University, Taiwanx. Prof Jacek M. Jeżowski, Rzeszow University of Technology, Poland xi. Prof Paul Stuart, École Polytechnique, Montreal, Canadaxii. Dr Denny Ng, UNMCxiii. Dr Kathleen B. Aviso, De La Salle University-Manila, Philippinesxiv. Dr Sivakumar Kumaresan, Universiti Malaysia Sabah, Malaysiaxv. Dr Irene M. L. Chew, Monash University Sunway Campus, Malaysiaxvi. Dr Chun Deng, China University of Petroleum-Beijingxvii. Dr Alberto Alva-Argaez, CANMET, Canadaxviii. Dr Abeer Shoaib, Suez-Canal University, Egyptxix. Dr Vasiliki Kazantzi, Technological Educational Institute of Larissa, Greecexx. Dr Petar Varbanov, University of Pannonia, Hungaryxxi. Dr Nick Hallale, Shell UKxxii. Dr Mimi Haryani Hashim, Universiti Teknologi Malaysia, Malaysiaxxiii. Dr ChangKyoo Yoo, KyungHee University, Koreaxxiv. Dr Chung Lim Law, UNMCxxv. Dr Hon Loong Lam, UNMCxxvi. Dr Denny K. S. Ng, UNMCxxvii. Dr Chew Tin Lee, Universiti Teknologi Malaysia, Malaysiaxxviii. Dr Hul Seingheng, Institut de Technologie du Cambodge, Cambodiaxxix. Dr Alexandros Koulouris, Technological Educational Institute of Thessaloniki, Greecexxx. Dr Grzegorz Poplewski, Rzeszow University of Technology, Polandxxxi. Mustafa Kamal, Universiti Teknologi Malaysia, Malaysiaxxxii. Jully Tan, UCSI University, Malaysiaxxxiii. Mike Boon Lee Ooi, NGLTech, Malaysiaxxxiv. Chiang Choon Lai, UNMCxxxv. Yin Ling Tan, Curtin University of Technology Sarawak Campus, Malaysiaxxxvi. Cheng Seong Khor, Universiti Teknologi Petronas, Malaysiaxxxvii. Sophanna Nun, National Cleaner Production Office, Cambodia
Research attachment hosting for international students
Name: SeingHeng HULAdvisor: Prof Raymond TanInstitution: De La Salle University-Manila, PhillipinesPeriod: 7 – 18 August 2006
Name: Edward YONG and Choon Hock PAUAdvisor: Yin Ling TanInstitution: Curtin University of Technology Sarawak Campus, MalaysiaPeriod: 16-20 July 2007
Name: Chun DENG and Tianhua WANGAdvisor: Prof Xiao FengInstitution: Xi’an Jiaotong UniversityPeriod: 22 October – 22 November 2007
Name: Jui-Yuan LEEAdvisor: Prof Cheng-Liang ChenInstitution: National Taiwan UniversityPeriod: 1 – 10 April 2008
Name: Gopal Chandra SAHUAdvisor: Prof Santanu Bandyopadhyay
17
Institution: Indian Institute of Technology, Bombay, IndiaPeriod: 20 July – 25 August 2010
Name: Sophanna NUNAdvisor: Prof Raymond TanInstitution: De La Salle University-Manila, PhillipinesPeriod: 30 July – 6 August 2010
Name: Zengkun WEN and Wei LIAdvisor: Dr Chun Deng and Prof Xiao FengInstitution: China University of Petroleum-BeijingPeriod: 20 June – 20 July 2013
Postgraduate Student Supervision1. Denny Kok Sum NG (PhD)
Topic : Synthesis of Resource Conservation Network with Interception PlacementDuration : June 2006 – June 2008Co-supervisor : Prof. Michael ClokeCo-researchers : Prof. Dr Raymond Tan, DLSU-Manila
2. Irene Mei Leng Chew (PhD)Topic : Synthesis of Inter-Plant Resource Conservation NetworkDuration : February 2007 – September 2009Co-supervisor : Prof. Michael ClokeCo-researchers : Prof. Dr Raymond Tan, DLSU-Manila
3. Mahendran Subramaniam (MSc, CEPP-IPPMS)Topic : Synthesis of Chilled Water NetworkDuration : November 2006 – May 2007Co-supervisor : Prof. Ramlan Abdul Aziz
4. Abeer Mahmoud Shoaib Mohamed (PhD) - Suez Canal University, EgyptTopic : A Systematic Approach for Synthesis of Mass Exchange NetworkDuration : October 2006 – June 2008Co-supervisor : Assoc. Prof. Dr. Said Mohamed Abdalla (Suez Canal University); Assoc. Prof. Dr.
Moustafa El-Sayed Awad (Suez Canal University); Prof. Dr. Mahmoud M. El-Halwagi(Texas A&M University, US)
5. Omar H. Sulhi (MSc)Topic : Process Modeling and Optimization for Cocoa ProductionDuration : June 2008 – September 2008Co-supervisor : Assoc. Prof. Dr. Chung Lim Law
6. Noor Zuraihan Mohamad Noor (MSc, CEPP-IPPMS)Topic : The Use of Computer Simulation Tools for Modelling of Biopharmaceutical Production
at InnobioDuration : January – May 2009Co-supervisor : Prof. Ramlan Abdul Aziz
7. Victor Francis Obialor Onyedim (MSc)Topic : Water Minimisation for an Acid Production PlantDuration : March 2009 – September 2009Co-supervisor : Prof. Dr Raymond Tan, DLSU-Manila
8. Wendy Tjan (MSc)Topic : A Graphical Representation of Carbon Footprint Reduction for Chemical ProcessesDuration : March 2009 – September 2009Co-supervisor : Prof. Dr Raymond Tan, DLSU-Manila
18
9. Raymond Eam Hooi Ooi (PhD)Topic : Carbon-constrained energy planning with optimum placement of carbon capture and
storageDuration : February 2010 - presentCo-supervisor : Dr Denny Ng; Prof. Dr Raymond Tan, DLSU-Manila
10.S. Sadish Kumar (MSc, CEPP-IPPMS)Topic : Project on Energy Conservation and Carbon Dioxide Emission ReductionDuration : July 2010 – May 2011Co-supervisor : Prof. Ramlan Abdul Aziz
11.Yin Ling Tan (PhD, Curtin University of Technology Sarawak Campus)Topic : Optimisation of Reuse/Recycle Networks Using Energy, Mass and Property
IntegrationDuration : February 2007 - presentCo-supervisor : Prof. Dr Yudi Samyudia, Prof. Mahmoud El-Halwagi
12.Joseph S. H. Lim (EngD, IBD UTM)Topic : Building a world class herbaceutical company via operational excellence in supply
chain managementDuration : July 2010 – presentCo-supervisor : Prof. Ramlan Abdul Aziz
13.Walaa Mahmoud Shehata Soliman (Suez University, Egypt)Topic : Process Design and Synthesis of Hydrogen NetworksDuration : 2010 – 2013Co-supervisor : Prof. Dr. Fatma Khalefa Gad, Dr. Abeer Mahmoud Shoaib, Dr. Jin-Kuk Kim
Postgraduate thesis examination1. Anand Moodley (MSc)
Topic : Development of a unified mass and heat integration framework for sustainable design:An automated approach
Date : 27 July 2007University : University of Pretoria, South Africa
2. Petrica Iancu (PhD)Topic : Process Integration for Water Minimisation in Oil Processing and PetrochemistryDate : November 2007University : University POLITEHNICA of Bucharest, Romania
3. Abeer Mahmoud Shoaib Mohamed (PhD)Topic : A Systematic Approach for Synthesis of Mass Exchange NetworkDate : 4 June 2008University : Suez Canal University, Egypt
4. Ciou Ying-Jyuan (PhD)Topic : A Mathematical Programming Approach for Synthesis and Design of Mass/Heat
Exchanger Networks in Batch PlantsDate : 16 July 2008University : National Taiwan University, Taiwan
5. Jacques Francois Gouws (PhD)Topic : Development of a Complete Process Integration Framework for Wastewater
Minimisation in Batch ProcessesDate : 28 November 2008University : University of Pretoria, South Africa
19
6. Chien Hwa Chong (PhD)Topic : Improving Product Quality of Dehydrated Fruit Using Hybrid Drying TechniqueDate : 7 June 2010University : University of Nottingham (internal examiner)
7. Jui-Yuan Lee (PhD)Topic : Synthesis of Resource Conservation Network for Batch and Continuous ProcessesDate : 18 Jan 2011University : National Taiwan University, Taipei
8. Donald Robert Nonyane (MEng)Topic : Long Term Scheduling Technique for Wastewater Minimization in Multipurpose Batch
ProcessesDate : 1 July 2011University : University of Pretoria, South Africa
9. Gololo KV (PhD)Topic : Analysis, Synthesis and dOptimization of Complex Cooling Water SystemsDate : July 2013University : University of Pretoria, South Africa
International Scientific Committee1. Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution
Reduction (2006 - present).2. European Symposium of Computer-Aided Process Engineering (ESCAPE-19), Poland.3. Gas Processing Symposium, Qatar (2009, 2010, 2012)4. Foundation of Computer-Aided Process Design (FOCAPD 2009), Colorado, US.5. Advances in Energy Research (ICAER 2009, 2011, 2013), India.6. Process System Engineering (PSE’09), Brazil (special reviewer).7. CUTSE International Conference, Sarawak (2009).8. 11th International Symposium on Process Systems Engineering (PSE 2012), Singapore.9. The 6th International Symposium on Design, Operation and Control of Chemical Processes (PSE Asia
2013), Kuala Lumpur.10. 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah11. International Conference on Food and Biosystems Engineering (FaBE2013), Greece12. 12th International Symposium on Process Systems Engineering (PSE 2012), European Symposium of
Computer-Aided Process Engineering (ESCAPE-25), Copenhagen, Denmark.
Editorial Board Member for Publication1. Process Safety & Environmental Protection (Transactions of IChemE Part B)2. Clean Technology and Environmental Policy3. Chemical Engineering Transactions - http://www.aidic.it/italiano/pubblicazioni/transactions.html4. IEM Journal
Evaluator for international institutions1. National Research Foundation (NSF), South Africa (research projects, researchers’ performance)2. Qatar National Research Fund (QNRF), Qatar (research projects)
Reviewer for Journals1. ASEAN Journal of Chemical Engineering2. Asia-Pacific Journal of Chemical Engineering3. Applied Energy4. Applied Thermal Engineering5. Chemical Engineering Communications6. Chemical Engineering Journal7. Chemical Engineering Science8. Clean Technologies and Environmental Policy9. Computers and Chemical Engineering10. ENERGY
20
11. Environmental Modelling and Softwares12. Environmental Engineering and Management Journal13. IEM Journal14. Industrial & Engineering Chemistry Research15. Journal of Cleaner Production16. Journal of Environmental Management17. Jurnal Kejuruteraan Kimia Malaysia18. Jurnal Teknologi UTM19. Trans IChemE, Part A – Chemical Engineering Research and Design20. Trans IChemE, Part B – Process Safety and Environmental Protection21. Pertanika Journal of Science & Technology22. Pharmaceutical Engineering
University administrative duties1. University level:
a. Postgraduate and Research Strategy Committees (2010 – 2011)b. Centre of Excellence for Green Technologies - Director (2006 – present)
i. Professional workshops organised: Fundamentals of Chemical Safety & Health (19 - 20 April 2012, Royale Chulan) Green Technologies Professional Course (14 & 15 December 2012, Genting) 2-Day Professional Workshop on Bioenergy (7 & 8 May 2012, Royale Chulan)
ii. In-house training for companies: Lembaga Getah Malaysia (17-18 April 2012) ExxonMobil Exploration & Production Malaysia (13, 14, 20, 21, 27, 28 Dec 2012 ;
3, 4, 10, 11, 17, 18 Jan 2013)iii. Conferences organised:
Postgraduate Colloquium on Environmental Research (POCER2011), 15-16 July2011, UNMC
International Summer Conference on Business Innovation & TechnologyManagement (APBITM 2012), July 01-03, 2012, Genting Highland (local host)
Postgraduate Colloquium on Environmental Research (POCER2013), 28—29June 2013, Genting Highland
18th
Conference on Process Integration, Modelling and Optimisation for EnergySaving and Pollution Reduction (PRES 2015), Kuching
2. Faculty level:a. Faculty Research Committee
i. Responsibilities: attend monthly Research Committee Meeting, research prospectus forFaculty of Engineering, Admission Tutor for postgraduate research students
ii. Faculty Postgraduate Committeeb. Head of ENVIRONMENT Research Division
i. Activities organised: Research Away Day (15 July 10, Oriental Crystal Hotel, Kajang);Postgraduate Colloquium (2011), Research Away Day 2011 (23 Sept 11, Mines WellnessHotel Seri Kembangan), Research Away Day 2012 (7 Aug 12, Hotel Equatorial Bangi)
ii. Responsibilities: organise research groups, attend monthly Research CommitteeMeeting, research prospectus for Faculty of Engineering, organise research seminars
iii. Admission tutor for postgraduate research students (2010-present)iv. Head of Sustainable Process Integration (SPI) Research Group (2006-2012).
3. Department of Chemical and Environmental Engineering:a. Administrative on staff candidates interviewb. Undergraduate course review committeec. Organise research/industrial talks and seminarsd. Advisor for Chemical Engineering Students’ Societye. Coordinator for MEng/BEng design projectsf. Admission tutor for postgraduate research studentsg. Industrial advisory boardh. Tri-campus Departmental Teaching and Learning Committee (Sept 2010 – June 2013)
21
Talk / Seminar Organised1. Luncheon Talk “Application of Mass Exchange Network Synthesis”
Speaker : Assoc. Prof. Dr. Duncan Fraser (University of Cape Town, South Africa)Date : 31 January 2001 Venue : CEPP, UTM
2. Three Day Hands-on Course on “Energy and Waste Reductions in the Process Industries: A PinchTechnology Approach”Course tutors : Assoc. Prof. Dr. Duncan Fraser (University of Cape Town, South Africa)
Dr Zainuddin Abdul Manan (UTM)Date : 29 – 31 January 2002 Venue : BATC UTM KL
3. Two Day Hands-on Course on “Batch Process Modeling and Optimisation”Course tutor : Dr Alexandros Koulouris (Intelligen, Inc., Greece)Date : 10 – 11 March 2003 Venue : BATC UTM KL
4. Public Talk “Global Biotech Business and Investment Today”Speaker : Dr Mou Duen Gang (Professor, Malaysian University of Science & Technology)Date : 7 October 2003 Venue : CEPP, UTM
5. SuperPro Designer User ConferenceSpeakers : Dr Alexandros Koulouris (Intelligen, Inc., Greece); Dr Mat Rasol Awang (MINT),
Sivakumar Kumaresan (CEPP, UTM), Dr Lee Chew Tin (FKKKSA, UTM)Date : 27 April 2005 Venue : UTM KL
6. Career Guidelines TrainingSpeakers : Karl Kolmetz (KLM Technology Group)Date : 2 December 2005 Venue : UNMC
7. A Two Day Workshop on Process Integration: Systematic Tools and Industrial ApplicationsSpeaker : Prof Mahmoud El-Halwagi, Texas A&M university, USDate : 19 – 20 June 2006 Venue : Kuala Lumpur Convention Centre
8. Professional ExcellenceSpeaker : Dr Alan Rossiter (Rossiter and Associates, US)Date : 24 March 2006 Venue : UNMC
9. Energy Management via Process IntegrationSpeaker : Dr Alan Rossiter (Rossiter and Associates, US)Date : 24 March 2006 Venue : UNMC
10.Conference on Best Practises in Process Plant ManagementOrganiser : Chem Eng Pilot Plant (CEPP), UTMDate : 21 – 22 June 2006 Venue : Kuala Lumpur Convention Centre
11.Herbal Product Development from Seed to ShelfSpeaker : Prof Ramlan Abdul Aziz (CEPP, UTM)Date : 10 April 2006 Venue : UNMC
12.Synthesis Of Optimal Topologically-Constrained Water Reuse Network Using Swarm IntelligenceSpeaker : Mr Hul Seingheng (De La Salle University-Manila, Philippines)Date : 14 August 2006 Venue : UNMC
13.Career of A Chemical EngineerSpeaker : Mr Chan Tuck Leong (Petronas)Date : 18 November 2006 Venue : UNMC
14.Recent Developments in Process IntegrationSpeaker : Prof Robin Smith (University of Manchester, UK)Date : 8 December 2006 Venue : UNMC
22
15.Life Cycle AssessmentSpeaker : Dr Raymond R. Tan (De La Salle University-Manila, Philippines)Date : 27 March 2007 Venue : UNMC
16.Theory and Extensions of Source/Sink Pinch DiagramsSpeaker : Dr Raymond R. Tan (De La Salle University-Manila, Philippines)Date : 30 March 2007 Venue : UNMC
17.Career as a Process Engineer at Paper MillSpeaker : Arunasalam Athimulam (Malaysian Newsprint Industry)Date : April 2007 Venue : UNMC
18.Conceptual Approach for Targeting Water System with Regeneration RecycleSpeaker : Chun Deng (Xi’an Jiaotong University, China)Date : 12 November 2007 Venue : UNMC
19.Malaysia Energy OutlookSpeaker : Phubalan Karunakaran (Pusat Tenaga Malaysia)Date : 17 October 2008 Venue : UNMC
20.Shell Malaysia Career and Technical TalkSpeaker : Debbie Chan (Shell Human Resource) and Paul Siew (Shell Global Solution)Date : 20 November 2008 Venue : UNMC
21.Chemical Engineering – Implementation in Semiconductor IndustrySpeaker : Mahendran Subramaniam (formally Silttera-Chemicals; Intel)Date : 2 March 2009 Venue : UNMC
22.Introduction to Computational Fluid DynamicSpeaker : Dr Julius Gimbun (Universiti Malaysia Pahang)Date : 13 July 2009 Venue : UNMC
23.Career of a Chemical Engineer in a Pharmaceutical CompanySpeaker : Zuraihan (NNE Pharma)Date : 9 November 2009 Venue : UNMC
24.The Change JourneySpeaker : M Akbal Shafawi (MTBE Petronas).Date : 23 November 2009 Venue : UNMC
25.My Career as a Chemical EngineerSpeaker : Kuan Choon Keat (MTBE Petronas).Date : 25 February 2010 Venue : UNMC
26.Particle Engineering: Role of Surface PropertiesSpeaker : Dr Jerry Y. Y. Heng (Imperial College London, UK)Date : 14 June 2010 Venue : UNMC
27.Advanced Process Integration Lecture Series (ENVIRONMENT Research Division)
Synthesis of heat integrated water network with negligible contaminant effect Automated targeting technique for batch water network Synthesis of regional energy supply chain based on palm oil biomass
Speakers : Gopal Chandra Sahu (Indian Institute of Technology, Bombay); Sophanna Nun(Institute of Technology of Cambodia, Cambodia); Assoc Prof Mustafa Kamal(Universiti Teknologi Malaysia).
Date : 3 Aug 2010 Venue : UNMC
28.Role of a Chemical Engineer in Oil and Gas Platform Design
23
Speaker : Ir Raymond Ooi Eam Hooi (Ranhill WorleyParsons)Date : 1 Nov 2010 Venue : UNMC
29.What is installed for you in a Chemical Engineering Programme-Academic vs. Reality?Speaker : Alan Ko Shian Lyn (Innovative Process Solution)Date : 3 Dec 2010 Venue : UNMC
30.The Power of Mathematics in Process Integration (ENVIRONMENT Research Division)Speaker : Professor Thoko Majozi (University of Pannonia, South Africa)Date : 20 Dec 2010 Venue : UNMC
31.Pump Selection and DesignSpeaker : Ir Shyam Lakshmanan (Malay-Sino Chemical Industry)Date : 8 March 2011 Venue : UNMC
32.How to design a good distillation columnSpeaker : Melwynn Leong (Sulzer Chemtech, Singapore)Date : 9 March 2011 Venue : UNMC
33.Industrial talkSpeaker : Tan Yee Voon (Chemical Mate)Date : 12 Oct 2011 Venue : UNMC
34.Overview of oleochemical industrySpeaker : Assoc Prof Mustafa Kamal (CLEAR, UTM)Date : 25 Oct 2011 Venue : UNMC
35.New Challenges and Opportunities of PSE from Experiences of Environmental SystemsEngineering (ESE)Speaker : Assoc Prof ChangKyoo Yoo (Kyung Hee University, Korea)Date : 11 Jan 2012 Venue : UNMC
36.Professional Excellence and EthicsSpeaker : Dr Alan RossiterDate : 16 Feb 2012 Venue : UNMC
37.Caution - Fresh Graduates in Work!Speaker : Nik Khairul IzzatDate : 4 Apr 2012 Venue : UNMC
38.High Level Seminar (co-host with MYEULINK)o Integration of Energy and Resource Flows for World Sustainability; an EU perspectiveo Workshop on EU Research Proposal Write-up and SubmissionSpeaker : Prof Jiří Jaromír Klemeš Date : 10 July 2012 Venue : UNMC KL Teaching Centre
39.Overview of Oil & Gas IndustrySpeaker : Ir Mohd Anwar AhmadDate : 8 Oct 2012 Venue : UNMC
40.Life Mass BalanceSpeaker : Rosmi ZamzuriDate : 12 March 2013 Venue : UNMC
Professional Courses Taught1. Workshop on Computer Aided Process Simulation by Design II for Windows
Organiser : Process System Engineering Group, Chem Eng Dept., UTM
24
Date : 24 – 25 August 2000 Venue : Process Design Lab, Chem Eng Dept.Participants : Lecturers & researchers from FKKKSA, UTM
2. Workshop on Computer Aided Process Simulation by Design II for WindowsOrganiser : Process System Engineering Group, Chem Eng Dept., UTMDate : 16 – 17 May 2001 Venue : Process Design Lab, Chem Eng Dept.Participants : Lecturers & researchers from FKKKSA, UTM
3. Hands-on Introduction to Process Simulation Modelling for Continuous and Batch ProcessesOrganiser : Process System Engineering Group, Chem Eng Dept., UTMDate : 12 – 13 May 2003 Venue : Process Design Lab, Chem Eng Dept.Participants : Lecturers & researchers from FKKKSA, UTM
4. A Two-day Hands-on Course on Batch Process Modelling and OptimisationOrganiser : Chem Eng Pilot Plant (CEPP), UTMDate : 27 – 28 May 2003 Venue : Computer Room, CEPP UTMParticipants : Industrial participants, researchers and lecturers from academic institution
5. A Two-day Hands-on Course on Batch Process Modelling and OptimisationOrganiser : ACHEMA Pte Ltd, SingaporeDate : 3 & 5 September 2003Venue : School of Chemical and Life Sciences, Singapore PolytechnicParticipants : Lecturers & researchers from Singapore Polytechnic, Singapore
6. A Two-day Hands-on Course on Batch Process Modelling and OptimisationOrganiser : Chem Eng Pilot Plant (CEPP), UTMDate : 31 March & 1 April 2004 Venue : UTM City Campus, KLParticipants : Industrial participants, researchers and lecturers from academic institutions
7. Hands-on Introduction to Process Simulation Modelling for Continuous and Batch ProcessesOrganiser : Process Synthesis and Design Group, Chem Eng Dept., UTMDate : 23 – 24 June 2004 Venue : Process Design Lab, Chem Eng Dept.Participants : Lecturers & researchers from FKKKSA, UTM
8. A Four Day Course on Wastewater Treatment Plant Operation and TroubleshootingOrganiser : Chem Eng Pilot Plant (CEPP), UTMDate : 2 – 5 August 2004 Venue : UTM City Campus, KLParticipants : Industrial participants, researchers and lecturers from academic institutions
9. A Three and a Half Day Course on Maximising Energy and Water Savings in Process IndustryUsing Pinch AnalysisOrganiser : Process Synthesis and Design Group, Chem Eng Dept., UTMDate : 10 – 13 August 2004 Venue : UTM City Campus, KLParticipants : Industrial participants
10. A Four Day Course on Wastewater Treatment Plant Operation and TroubleshootingOrganiser : Chem Eng Pilot Plant (CEPP), UTMDate : 4 – 7 October 2004 Venue : EMSB/PEMSB Training Centre, KertehParticipants : Industrial participants
11. A Four Day Course on Wastewater Treatment Plant Operation and TroubleshootingOrganiser : Chem Eng Pilot Plant (CEPP), UTMDate : 17 – 20 January 2005 Venue : UTM City Campus, KLParticipants : Industrial participants, researchers and lecturers from academic institutions
12. Maximising Energy and Water Savings in Process Industry Using Pinch AnalysisOrganiser : De La Salle University, Manila (workshop for HNICEM 2005)Date : 24 March 2005 Venue : De La Salle University, ManilaParticipants : Industrial participants, researchers and lecturers from academic institutions
25
13. A Two-day Hands-on Course on Batch/Bioprocess Modelling Scheduling and OptimisationOrganiser : Chem Eng Pilot Plant (CEPP), UTMDate : 25 – 26 March 2005 Venue : UTM City Campus, KLParticipants : Industrial participants, researchers and lecturers from research/academic institutions
14. A Four Day Course on Wastewater Treatment Plant Operation and TroubleshootingOrganiser : Chem Eng Pilot Plant (CEPP), UTMDate : 4 – 7 July 2005 Venue : UTM City Campus, KLParticipants : Industrial participants
15. Maximising Energy and Water Savings in Process Industry Using Pinch AnalysisOrganiser : Process Synthesis and Design Group, Chem Eng Dept., UTMDate : 19 – 22 September 2005 Venue : UTM City Campus, KLParticipants : Industrial participants, researchers and lecturers from academic institutions
16. Computer Aided Design for Wastewater Treatment Plant (in house training)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 21 November 2005 Venue : National University of Malaysia (UKM)Participants : Researchers and lecturers from environmental, civil and chemical engineering
17. A Two-day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (inhouse training)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 15 – 16 September 2006 Venue : University Kuala LumpurParticipants : Researchers/lecturers
18. A Four Day Course on Wastewater Treatment Plant Operation and TroubleshootingOrganiser : Chem Eng Pilot Plant (CEPP), UTMDate : 26 – 29 March 2007 Venue : UTM City Campus, KLParticipants : Industrial participants
19. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (inhouse training)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 16 – 18 May 2007 Venue : National University of Malaysia (UKM)Participants : Researchers/lecturers from Chemical and Process Engineering Dept, UKM
20. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (inhouse training)Organiser : ACHEMA Pte Ltd, SingaporeDate : 12 – 14 February 2008 Venue : Nanyang Polytechnic SingaporeParticipants : Lecturers from Nanyang Polytechnic Singapore
21. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (inhouse training)Organiser : ACHEMA Pte Ltd, SingaporeDate : 18 – 20 June 2008 Venue : Singapore PolytechnicParticipants : Lecturers from Singapore Polytechnic
22. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (inhouse training)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 1 – 3 July 2008 Venue : University Malaysia Perlis (UniMAP)Participants : Researchers/lecturers from School of Bioprocess Engineering, UniMAP
23. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (inhouse training)Organiser : Chem Eng Pilot Plant (CEPP), UTM
26
Date : 25 – 27 June 2009 Venue : University Malaysia Pahang (UMP)Participants : Researchers/lecturers from Chemical Engineering Department, UMP
24. Production Planning with Process Integration (EngD programme)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 29-30 August;
5-6, 12-13 September 2009Venue : UTM City Campus, KL
Participants : Industrial participants, researchers and lecturers from academic institutions
25. Half-Day Workshop: How to Design Water Recovery Network for a Process PlantOrganiser : Chemical Engineering Technical Division, IEMDate : 3 October 2009 Venue : Wisma IEMParticipants : Industrial participants
26. Water Pinch Analysis (Workshop for Regional Renewables and Waste to Energy Integration andSustainable System Implementation - http://cpi.uni-pannon.hu/index.php?section=25)Organiser : University of Pannonia, Veszprém, HungaryDate : 7 – 12 September 2009 Venue : University of Pannonia, VeszprémParticipants : Postgraduate students from EU universities
27. Modelling and Optimisation of Batch Processes and Wastewater Treatment (EngD programme)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 10-11, 17-18, 24-25 Oct 09 Venue : UTM City Campus, KLParticipants : Industrial participants
28. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and OptimisationOrganiser : Chem Eng Pilot Plant (CEPP), UTM; International Islamic University Malaysia (IIUM)Date : 1 – 3 June 2010 Venue : International Islamic University MalaysiaParticipants : Researchers/lecturers from academic institutions
29. Process Integration for Resource Conservation (workshop for PSE Asia 2010)Organiser : National University SingaporeDate : 25 July 2010 Venue : PSE Asia 2010, SingaporeParticipants : Industrial participants, researchers and lecturers from academic institutions
30. Waste Minimisation - How to Set Realistic Benchmark TargetsOrganiser : Marcus EvansDate : 18-19 October 2010 Venue : Jakarta, IndonesiaParticipants : Industrial participants
31. Modelling and Optimisation of Batch Processes and Wastewater Treatment (EngD programme)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 18-19, 25-26 Sept, 2-3 Oct 10 Venue : UTM City Campus, KLParticipants : Industrial participants
32. Production Planning with Process Integration (EngD programme)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 13-14, 20-21, 27-28 Nov 2010 Venue : UTM City Campus, KLParticipants : Industrial participants
33. Wastewater Treatment and Recycling Workshop (in-house training)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 29-30 Nov; 1-2 Dec 2010 Venue : Intel Technology, PenangParticipants : Engineers from facility team, EHS personnel (Kulim and Penang plants)
34. Modelling and Optimisation of Batch Processes and Wastewater Treatment (EngD programme)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 2-3, 9-10, 16-17 July 11 Venue : UTM City Campus, KLParticipants : Industrial participants
27
35. Water, Hydrogen and Carbon Footprint Reduction Using Pinch AnalysisOrganiser : Center for Environmental studies (Kyung Hee University, Korea)Date : 5 – 7 July 2011 Venue : Kyung Hee University, KoreaParticipants : Researchers and lecturers from academic institutions
36. Optimizing Water and Resources for Biofuels ProductionOrganiser : Research and Development Centre for Petroleum Processing (PVPro), Vietnam
Petroleum Institute (VPI)Date : 30 – 31 August 2011 Venue : PVPro, Hochiminh CityParticipants : Engineers from VPI
37. Production Planning with Process Integration (EngD programme)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 10-11, 17-18, 24-25 Sept 2011 Venue : UTM City Campus, KLParticipants : Industrial participants
38. Pinch Technology: Energy and Water ManagementOrganiser : Department of Energy Science and Engineering, Indian Institute of Technology
Bombay, Mumbai, India (IIT-Bombay)Date : 7 – 8 December 2011 Venue : IIT-BombayParticipants : Industrial participants
39. One Day Course on Process Integration for Waste Minimization and Production CarbonFootprint ReductionOrganiser : Chemical Engineering Technical Division, IEMDate : 19 December 2011 Venue : Wisma IEMParticipants : Industrial participants
40. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and OptimisationOrganiser : Chem Eng Pilot Plant (CEPP), UTMDate : 22 – 24 February 2012 Venue : Universiti Teknologi MARAParticipants : Researchers/lecturers from academic institutions
41. Production Planning with Process Integration (EngD programme)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 28-29 April, 5-6, 12-13 May 2012 Venue : UTM City Campus, KLParticipants : Industrial participants
42. Seven Keys for Successful International ResearcherOrganiser : Persada RAYDate : 2 Oct 2012 Venue : Singgahsana HotelParticipants : University academics
43. Modelling and Optimisation of Batch Processes and Wastewater Treatment (EngD programme)Organiser : Chem Eng Pilot Plant (CEPP), UTMDate : 13, 14, 20, 21, 27, 28 Oct 2012 Venue : UTM City Campus, KLParticipants : Industrial participants
44. Resource Conservation using Pinch AnalysisOrganiser : Universiti Malaysia SabahDate : 20 Nov 2012 Venue : Universiti Malaysia SabahParticipants : Industrial participants and university academics
45. Seven Keys for Successful International ResearcherOrganiser : U21 Early Career ResearcherDate : 6 Dec 2012 Venue : Shanghai Jiaotong UniversityParticipants : University academics
28
46. Publication – Why and HowOrganiser : Shanghai Jiaotong UniversityDate : 6 Dec 2012 Venue : Shanghai Jiaotong UniversityParticipants : University academics
47. Multicomponent SeparationOrganiser : Nottingham MyRIAD SolutionsDate : 10 – 11 Jan 2013 Venue : ExxonMobil Exploration &
Production MalaysiaParticipants : Industrial participants
48. Two-day Hands-on Training on Water Pinch AnalysisOrganiser : PETRONAS Group Health, Safety & Environment DivisionDate : 27 – 28 Feb 2013
6 – 7 March 201327 – 28 March 201315 – 16 April 2013
Venue : Royale Chulan KLAwana-Kijal KertehImpiana KLCC Hotel & SpaKL Convention Centre
Participants : PETRONAS employees from various OPUs
49. How to Write a Good PaperOrganiser : UNMC Graduate SchoolDate : 14 March 2013 Venue : UNMCParticipants : Postgraduate students
50. Half Day Workshop: Water Minimisation with Pinch AnalysisOrganiser : Curtin University, Perth, AustraliaDate : 24 July 2013 Venue : Curtin University, AustraliaParticipants : Industrial participants, university researchers
51. Water Minimization and Carbon Footprint Reduction with Process IntegrationOrganiser : IChemEDate : 29 – 30 July 2013 Venue : SingaporeParticipants : Industrial participants
52. Publication – Why and How; How to Write a Good PaperOrganiser : PSE Lab, China University of Petroleum, BeijingDate : 14 May 2013 Venue : China University of PetroleumParticipants : Postgraduate students
Talks / Seminars Delivered1. How to Establish Professional Networks
Programme : UNMC Graduate School Training ProgrammeDate : 17 April 2009
2. How to Establish International Networks3. Extended Pinch Analysis Tool for Non-conventional Areas
Programme : Talk for Faculty of Engineering, De La Salle University-ManilaDate : 21 Nov 2007
4. Process Integration for Resource ConservationProgramme : Chemical Engineering Department, Universiti Teknologi PETRONASDate : 29 April 2009
5. How to Establish Professional NetworksProgramme : Talk for Chemical Engineering Department, University Malaysia PahangDate : 26 June 2009
6. How to Maximise the Potential of Water Reuse/Recycle
29
Programme : Technical Talk - Institution of Engineers, MalaysiaDate : 6 Aug 2009
7. Innovation in Chemical Engineering – or Pinch Me: a Creative Engineer!Programme : IChemE Technical MeetingDate : 17 March 2010
8. Benchmarking for Resource Conservation – A Process Integration PerspectiveProgramme : PETRONAS Waste Management Initiative Working Group MeetingDate : 10 June 2010
9. Carbon Footprint Reduction for Cleaner ProductionProgramme : Technical Talk - Institution of Engineers, MalaysiaDate : 9 Oct 2010
10. Wastewater forumProgramme : Two Day Exhibition cum Forum and Technical Talks on Water and Industrialised
Building System - Institution of Engineers, MalaysiaDate : 8 – 9 Dec 2010
11. How to Decide for a Future Career – Corporate Ladder vs. Postgraduate StudyProgramme : Industrial Talk of Chemical Engineering - Universiti Malaysia PahangDate : 9 Feb 2011
12. Postgraduate Study – BEng@18, MEng@23, PhD@25Programme : Technical Talk - Institution of Engineers, MalaysiaDate : 18 Feb 2012
13. Juggling Teaching, Research and Admin as a New LecturerProgramme : Early Career Research WorkshopDate : 2 May 2012
14. Process Integration Research in Carbon Capture and StorageProgramme : IChemE Oil & Natural Gas Special Interest Group evening meetingDate : 18 June 2012
15. Career Prospect in EngineeringProgramme : IEM Engineering WeekDate : 15 August 2012
16. Process Integration for CO2 reductionProgramme : Carbon Capture and Storage Horizons and Challenges Workshop, Gas Processing
Center, QatarDate : 10 – 11 Oct 2012
17. Process Integration for Resource Conservation and Emission ReductionProgramme : PETRONAS Waste Management Initiative Working Group MeetingDate : 24 Oct 2012
18. Seven Keys for Successful International ResearcherProgramme : Staff training series - Zhejiang University, ChinaDate : 4 Dec 2012
19. Professional Networking for Academics and ResearchersProgramme : Technical Talk - Institution of Engineers, MalaysiaDate : 8 Jan 2013
20. How to Manage Professional Networking and Collaboration in Academia and BeyondProgramme : Keynote and Roundtable Discussion – Early Career Researcher Network UNMC
30
Date : 13 March 2013
21. Productivity Enhancement and Resource Conservation with Process Integration TechniquesProgramme : Seminar on Excellence in Manufacturing - Federation of Malaysian ManufacturersDate : 18 June 2013
22. Teaching of Chemical Process DesignProgramme : IChemE Subject Interest Group WebinarDate : 21 June 2013
23. Carbon capture and storageProgramme : Research seminar @ University of University of the Witwatersrand, Johannesburg
South AfricaDate : 13 September 2013
24. Waste Minimization for Sustainable ProcessesProgramme : Environmental Seminar series, School of Geography UNMCDate : 15 October 2013
25. Carbon Footprint Reduction through Electricity and Steam Saving – A Graphical ApproachProgramme : Persidangan Tahunan Teknikal Untuk Jurutera Mekanikal dan ElectrikDate : 24 October 2013
Undergraduate / Postgraduate Courses Taught / Facilitated1. Computer Aided Process Simulation Project (SKC 4821)
Level : Chemical engineering undergraduate (year 4 – final year)Format : Lecture and workshopDuration : June – October 2004Affiliation : Chemical Engineering Dept, UTM
2. Membrane Separation Technology (SKC 4363)Level : Chemical engineering undergraduate (year 4 – final year)Format : TutorialDuration : 2000 – 2003Affiliation : Chemical Engineering Dept, UTM
3. Chemical and Biological Reaction Engineering (MBT 504)Level : Biotechnology MSc program (MIT syllabus)Format : Lecture and workshopDuration : May – June 2003Affiliation : Malaysia University of Science and Technology (MUST)
4. Process Engineering Fundamentals (PEF H81)Level : Chemical engineering undergraduate (year 1)Format : LectureDuration : Fall semester (September – December) – 2005, 2006Affiliation : University of Nottingham Malaysia
5. Plant Design (PLD H82)Level : Chemical engineering undergraduate (year 2)Format : LectureDuration : Spring semester (February – May) 2006 – presentAffiliation : University of Nottingham Malaysia
6. Chemical Product Design (H83CPD)Level : Chemical engineering undergraduate (year 3)Format : LectureDuration : Spring semester (February – May) 2006 – 2010
31
Affiliation : University of Nottingham Malaysia
7. Process Simulation 1 (H8CPS1) / Computer Flowsheeting (H8DCFL)Level : Chemical engineering undergraduate (year 3) / MScFormat : Lecture/workshopDuration : Fall semester (September – December) 2006 – presentAffiliation : University of Nottingham Malaysia
8. Process Synthesis and Design (H84PSD)Level : Chemical engineering undergraduate (year 4) / MScFormat : LectureDuration : Fall semester (September – December) 2007 – presentAffiliation : University of Nottingham Malaysia
9. Computer Systems (H82CYS)Level : Chemical engineering undergraduate (year 2)Format : Lecture/workshopDuration : Fall semester (September – December) 2008 – 2011Affiliation : University of Nottingham Malaysia
9. Process Design and Optimisation (H84PDO)Level : Chemical engineering undergraduate (year 4) / MSc (optional)Format : Lecture/workshopDuration : Spring semester (February – May) 2011 – presentAffiliation : University of Nottingham Malaysia
Course Monographs Prepared1. Aziz, R. A. and Foo, D. C. Y., Global and Local Outlook of Chemical Process Industry, Course
Monograph on “Chemical Engineering for Non-Chemical Engineers (CENCE)”, Chemical EngineeringPilot Plant, UTM (2000).
2. Aziz, R. A. and Foo, D. C. Y., Membrane Separation Technology, Undergraduate Subject Monograph,Dept. of Chemical Engineering, UTM (2000).
3. Aziz, R. A. and Foo, D. C. Y., Global and Local Outlook of Chemical Process Industry, ModuleMonograph on ”Integrated Process Plant Management Scheme (IPPMS)”, Chemical Engineering PilotPlant, UTM (2000).
4. Yunus, R. A., Manan, Z. A. and Foo, D. C. Y., Mass and Energy Balances, Course Monograph on“Chemical Engineering for Non-Chemical Engineers (CENCE)”, Chemical Engineering Pilot Plant, UTM(2000).
5. Aziz, R. A. and Foo, D. C. Y., Global and Local Outlook of Chemical Process Industry, CourseMonograph on “Chemical Engineering for Non-Chemical Engineers (CENCE)”, Chemical EngineeringPilot Plant, UTM (2000).
6. Aziz, R. A. and Foo, D. C. Y., Membrane Separation Technology, Undergraduate Subject Monograph,Dept. of Chemical Engineering, UTM (2000).
7. Aziz, R. A. and Foo, D. C. Y., Global and Local Outlook of Chemical Process Industry, ModuleMonograph on ”Integrated Process Plant Management Scheme (IPPMS)”, Chemical Engineering PilotPlant, UTM (2000).
8. Yunus, R. A., Manan, Z. A. and Foo, D. C. Y., Mass and Energy Balances, Course Monograph on“Chemical Engineering for Non-Chemical Engineers (CENCE)”, Chemical Engineering Pilot Plant, UTM(2000).
9. Aziz, R. A. and Foo, D. C. Y., Downstream Processing, Course Monograph on “Bioreactor Operationand Troubleshooting”, Chemical Engineering Pilot Plant, UTM (2000).
10.Manan, Z. A., Foo, D. C. Y., Lee, L. E., Ooi, B. L., Tan, E. F., Lim, F. Y. and Tee, S. T., ComputerAided Process Simulation by Design II for Windows, Workshop Monograph on “Computer AidedProcess Simulation by Design II for Windows”, Dept. of Chemical Engineering, UTM (2000).
11.Manan, Z. A., Foo, D. C. Y., Lee, L. E. and Ooi, B. L., Chemical Process Design Achieve, ProcessPlant Design Project Compilation, Dept. of Chemical Engineering, UTM (2000).
32
12.Yunus, R. A. and Foo, D. C. Y., Separation Processes, Module Monograph on “Integrated ProcessPlant Management Scheme (IPPMS)” and “Chemical Engineering for Non-Chemical Engineers(CENCE)”, Chemical Engineering Pilot Plant, UTM (2001).
13.Foo, D. C. Y., Lim, F. Y. and Manan, Z. A., Computer Aided Process Simulation by Design II forWindows, Workshop Monograph on “Computer Aided Process Simulation by Design II for Windows”,Dept. of Chemical Engineering, UTM (2001).
14.Yunus, R. A. and Foo, D. C. Y., Membrane Separation Processes and Cleaning, Course Monographon “A 2-day Hands-on Course on Membrane Separation Processes and Cleaning”, ChemicalEngineering Pilot Plant, UTM (2001).
15.Aziz, R. A. and Foo, D. C. Y., Global and Local Outlook of Chemical Process Industry, PetronasOperator Training Monograph, Chemical Engineering Pilot Plant, UTM (2000).
16.Foo, D. C. Y., and Manan, Z. A., Computer Aided Process Simulation for Continuous and BatchProcesses, Workshop Monograph on “Hands-on Introduction to Process Simulation Modelling forContinuous and Batch Processes”, Dept. of Chemical Engineering, UTM (2001).
17.Foo, D. C. Y. and Kumaresan, S., Batch Process Modelling and Optimisation, Course Monograph on“A Two-day Hands-on Course on Batch Process Modelling and Optimisation”, Chemical EngineeringPilot Plant, UTM (2003).
18.Foo, D. C. Y., Computer Aided Process Simulation Project (SKC 4821), Course Monograph, Dept. ofChemical Engineering, UTM (2004).
19.Foo, D. C. Y. and Kumaresan, S., Wastewater Treatment Plant Design via SuperPro Designer, CourseMonograph on “A Four Day Course on Wastewater Treatment Plant Operation and Troubleshooting”,Chemical Engineering Pilot Plant, UTM (2004).
20.Manan, Z. A. and Foo, D. C. Y. Water Minimisation by Pinch Technology, Course Monograph on “AThree and a Half Day Course on Maximising Energy and Water Savings in Process Industry UsingPinch Analysis”, Chemical Engineering Department, UTM (2004).
21.Foo, D. C. Y. Process Engineering Fundamentals, H81PEF Course Monograph, University ofNottingham (Malaysia Campus) (2005).
22.Foo, D. C. Y. Plant Design, H82PLD Course Monograph, University of Nottingham (Malaysia Campus)(2006).
23.Foo, D. C. Y. Chemical Product Design, H83CPD Course Monograph, University of Nottingham(Malaysia Campus) (2006).
24.Foo, D. C. Y. Process Synthesis and Design, H84PSD Course Monograph, University of Nottingham(Malaysia Campus) (2007).
25.Foo, D. C. Y. Computer Systems, H82CYS Course Monograph, University of Nottingham (MalaysiaCampus) (2008).
Chemical Engineering Design Project Supervision1. Crude oil refining – 14100 Barrel per day of gasoline production
Institution : Chemical Engineering Dept, UTMTerm / session : 2003 / 2004 Session IDuration : July – October 2003Innovation : Hydrogen distribution network synthesis using hydrogen pinch analysisCo-supervisor : Dr Amer MohammedStudents : Chang Siu Hua (leader), Chan Hoey Yen, Fatimah Rubaizah bt Mohd Rasdi,
Sham Zahyra bt. Abdul Rahman, Nor Adha bin Omar
2. Production of 2000 MTA of Oleic Acid from Palm Olein Using Immobilized LipaseInstitution : Bioprocess Engineering Dept, UTMTerm / session : 2004 / 2005 Session IDuration : August – October 2003Innovation : i. Batch process simulation using SuperPro Designer
ii. Batch heat integration by pinch analysisCo-supervisors : Dr Lee Chew Tin, Liza Salleh (Bioprocess Engineering Dept, UTM)Students : Chew Yin Hoon (Leader), Noor Diyana bt Salleh, Norhayati bt Moslan,
Rosmaria bt Abu Darim, Vinosh A/L Sinnappu
33
3. Production of 50,000 MTA of Formic AcidInstitution : Chemical Engineering Dept, UTMTerm / session : 2004 / 2005 Session IIDuration : November 2004 – March 2005Innovation : i. Process flowsheet synthesis using Douglas’ hierarchical approach
ii. Supertargeting for heat exchanger network synthesis (threshold problem)Co-supervisors : Mohd Johari KamarudinStudents : Tan Jully (Leader), Loh Kah Fang, Lidyayatty bt Abdul Malik, Nor Hafiziah bt
Abdul Hamid, Rodiffa bt Nasir
4. Production of 10,000 MTA of Animal Feed AdditivesInstitution : Bioprocess Engineering Dept, UTMTerm / session : 2005 / 2006 Session IDuration : July – November 2005Co-supervisors : Dr Lee Chew Tin (Bioprocess Engineering Dept, UTM)Students : Cheng Shu Ian, Siti Marsilawati bt Mohamed Esivan, Mohd Irham bin Idris,
Ilyanis bt Firdaus Jean Francois, Pua Hock Meng
5. Production of 50,000 MTA of USP Grade Benzoic Acid (BEng)Institution : School of Chemical and Environmental Engineering, UNMCTerm / session : 2006 / 2007Duration : September 2006 – May 2007Co-supervisors : Dr Abdelbaki BenamorStudents : Phua Sin Wei, Ashvin Nesan Sivanesen, Seah Kok Yew
6. Production of 500,000 MTA of Ethylbenzene (BEng)Institution : School of Chemical and Environmental Engineering, UNMCTerm / session : 2007 / 2008Duration : September 2007 – May 2008Students : Gabriel Loh Jia Pei, Goh Min-Foong, Khor Yenli, Chiok Boon Hoong
7. Production of 500,000 MTA of Ethylene (MEng)Institution : School of Chemical and Environmental Engineering, UNMCTerm / session : 2007 / 2008Duration : September 2007 – May 2008Students : Chong Li Ping, Chew Kean Guan, Grace Teh, Poh Chin Hoe
8. Production of 120,000 MTA of butyl acrylate (MEng, Group 1)Institution : Department of Chemical and Environmental Engineering, UNMCTerm / session : 2008 / 2009Duration : September 2008 – May 2009Students : Lee Kah Peng, Danny Khiew Nam Chien, Ili Izyan Syazwani, Tan Fang Ch
9. Production of 500,000 MTA of butyl acrylate (MEng, Group 2)Institution : Department of Chemical and Environmental Engineering, UNMCTerm / session : 2008 / 2009Duration : September 2008 – May 2009Students : Tiyor Sion Nean, Leong Weng Phoon, Nurul Jasneyta, Liyana Syazwani
10.Production of 500,000 MTA of purified terephthalic acid (MEng, Group 1)Institution : Department of Chemical and Environmental Engineering, UNMCTerm / session : 2008 / 2009Duration : September 2008 – May 2009Students : Lim Kian Vi, Ang Seng Heng, Teow Kiat Yin, Hoondal Ka'el Veen Singh
11.Production of 600,000 MTA of purified terephthalic acid (MEng, Group 2)Institution : Department of Chemical and Environmental Engineering, UNMCTerm / session : 2008 / 2009
34
Duration : September 2008 – May 2009Students : Wan Alwin Thim Fatt, Ban Cecilia Yun Yang, Quek Wern Shen, Ramanathan
Thebban
MEng Research Project Supervision1. Process integration for non-conventional areas
Duration : September 2006 – May 2007Innovation : Process integration for supply chain management and energy planningStudents : Leong Yew Jhin, Low Kean Way, Lee Sin Cherng
2. Integration for different water networksDuration : September 2007 – May 2008Innovation : Process integration for supply chain management and energy planningStudents : Melwynn Leong Kuok Yauu, Sinthi Laya Thillaivarrna
3. Carbon-constrained energy planningDuration : September 2008 – May 2009Innovation : Chronological constrained composite curves, dynamic programming for
plantation planningStudents : Diban A/L Pitchaimuthu, Wong Wai Hong, Chng Phui Kian
4. A New Flowrate Targeting Technique for Single Water Network and Total Site IntegrationDuration : September 2008 – May 2009Innovation : New graphical flowrate targeting techniqueStudents : Lee Liangming, Lim Ming Hann, Saw Shin Yin
5. Targeting for Minimum Treatment Flowrate for Multiple Treatment UnitsDuration : September 2009 – May 2010Innovation : New graphical flowrate targeting technique for multiple waste treatment unitsStudents : Sarah Soo Seen Teng, Kevin Yap Kar Keng, Toh Ee Ling
Major Symposiums / Courses / Workshops Attended1. Attended Safety, Health and Environmental Seminar (SAFHENS ’98), UTM (1998)2. Safety Induction Course on “Hydrogen Sulphide” (H2S), Shell Refining (FOM) Berhad (20 April 1999).3. One-day course on “Understanding Natural Gas Hydrates and Acid Gas Compression and Injection”
organised by CEPP, UTM (15 November 1999).4. Attended and presented a paper in 14
thSymposium of Malaysian Chemical Engineers (SOMChE
2000), Bangi, Selangor (30-31October 2000).5. Attended and presented a paper in Regional Symposium on Chemical Engineering, (RSCE) 2000,
National University of Singapore (11 – 13 November 2000).6. Organised and attended a luncheon talk by Assoc. Prof. Dr. Duncan Fraser (University of Cape Town,
South Africa) “Application of Mass Exchange Network Synthesis”, CEPP, UTM (31 January 2001).7. Attended and presented a paper at the 15
thSymposium of Malaysian Chemical Engineers (SOMChE
2001), Johor Bahru, Johor (11-12 September 2001).8. Organised and attended a Three Day Hands-on Course on “Energy and Waste Reductions in the
Process Industries: A Pinch Technology Approach”, BATC UTM KL (29 – 31 January 2002).9. Attended/presented papers in 2
ndWorld Engineering Congress(WEC2002), Sarawak (22-25 July
2002).10.Attended and presented papers in Regional Symposium on Chemical Engineering (RSCE 2002), Kuala
Lumpur (28 – 30 October 2002).11.Attended and presented papers in National Science Fellowship (NSF) Annual Workshop 2002, Kuala
Lumpur (17 – 18 December 2002).12.Attended and presented paper in SHELL Student Paper Presentation Contest (SSPEC 2003), UTM (15
– 16 February 2003).13.Attended and presented papers in Environment 2003, Batu Feringghi, Penang (18 – 19 February
2003).
35
14.Organised and attended a Two Day Hands-on Course on “Batch Process Modeling and Optimisation”,BATC UTM KL (10 – 11 March 2003).
15.Attended National Symposium on Science & Technology “Strategic Research and Innovation towardsEconomic Development”, Kuala Lumpur (28 – 30 July 2003).
16.Attended and presented papers in International Conference on Chemical and Bioprocess Engineering(ICCBPE 2003), Kota Kinabalu, Sabah (27 – 29 August 2003).
17.Attended and presented papers in 6th Conference on Process Integration, Modelling and Optimisationfor Energy Saving and Pollution Prevention (PRES’03), Hamilton, Canada (26 – 29 October 2003).Attended and presented papers in American Institute of Chemical Engineers (AIChE) Annual Meeting,San Francisco, United State (16 – 21 November 2003).
18.Panel for forum “Problem Solving in R&D” in Academic Excellence Motivation Program forPostgraduate Student in FKKKSA 2004.
19.Master of Ceremony for Conference on Best Practises for Process Plant Management, Kuala Lumpur(29 – 30 March 2004).
20.Presenter, FKKKSA Postgraduate Student Society May Workshop, “Advancement in your career –How professional network can help” (6 May 2004).
21.Presenter and exhibitor in The Malaysian Society for Molecular Biology and Biotechnology ScientificMeeting (MSMBB 2004), Melaka (19 – 22 July 2004).
22.Attended and presented papers at the 18th
Symposium of Malaysian Chemical Engineers (SOMChE2004), Universiti Teknologi Petronas, Tronoh, Perak (13 – 14 December 2004).
23.Master of Ceremony for Conference on 2nd
Best Practises for Process Plant Management, KualaLumpur (14 – 15 March 2005).
24.Attended, presented papers and conducted workshop at 2nd International Conference on Humanoid,Nanotechnology, Information Technology, Communication and Control, Environment, andManagement (HNICEM 2005), Manila, Philippines (17 – 20 March 2005).Attended and presentedpapers at the 2nd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2005) inconjunction with the 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), KotaKinabalu, Sabah (8 – 10 December 2005).
25.Attended and presented papers at the Regional Conference on Engineering Education (RCEE 2005),Johor Bahru (12 – 13 December 2005).
26.Workshop on Teaching Mass and Energy Balances, IChemE Malaysia Branch, 12 – 13 February 2007.27.Postgraduate Certificate of Higher Education (PGCHE) programme of UNMC (Aug 2006 - 2009).28.Attended workshop on Chemical Product Design, Universiti Putra Malaysia (December 2009).29.Attended workshop on Fundamental of Chemical Safety and Health (April 2012).
