1

CURRICULUM VITAE

Brief Description Ir. Dr. Dominic Foo is a Professor of Process Design and Integration at the University of Nottingham Malaysia Campus, and is the Founding Director for the Centre of Excellence for Green Technologies. He is a Fellow of the Institution of Chemical Engineers UK (IChemE), a Chartered Engineer with the UK Engineering Council, a Professional Engineer with the Board of Engineer Malaysia (BEM), as well as the 2012/3 session chairman for the Chemical Engineering Technical Division of the Institution of Engineers Malaysia (IEM). He is a world leading researcher in process integration for resource conservation. He establishes international collaboration with researchers from various countries in the Asia, Europe, American and Africa. Professor Foo is an active author, with two books, more than 80 journal papers and made more than 130 conference presentations, with more than 15 keynote/plenary speeches. He served as International Scientific Committees for many important international conferences (CHISA/PRES, FOCAPD, ESCAPE, PSE, etc.). Professor Foo is the Chief Editor for IEM Journal, Subject Editor for Trans IChemE Part B (Process Safety & Environmental Protection, Elsevier), Editorial Board Member for Clean Technology and Environmental Policy (Springer), and Chemical Engineering Transactions. He is the winner of the Innovator of the Year Award 2009 of IChemE, Young Engineer Award 2010 of IEM, Outstanding Young Malaysian Award 2012 of Junior Chamber International (JCI), as well as the SCEJ (Society of Chemical Engineers, Japan) Award for Outstanding Asian Researcher and Engineer. Contact Address and Area of Specialisation Department of Chemical and Environmental Engineering Centre of Excellence for Green Technologies University of Nottingham (Malaysia Campus Broga Road, 43500 Semenyih, Selangor, Malaysia. Tel: +60(3)8924-8130 (Off) ; +60(12)709-1414 (Mobile) ; Fax: +60(3)8924-8017 Email: dominic.foo@nottingham.edu.my ; foodominic@yahoo.com ; URL: www.nottingham.edu.my/CEGT ; www.nottingham.edu.my/SPI Area of specialisations: 1. Resource conservation (water minimisation, hydrogen network, property integration) with process

integration techniques – pinch analysis and mathematical optimisation 2. Computer-aided steady-state process simulation for batch and continuous processes 3. Carbon-constrained energy planning Educational Background Degree : PhD (Chemical) Completion Date : May 2006 Name of Institution : Universiti Teknologi Malaysia (UTM) Thesis title : Generic Cascade Analysis Technique for Setting the Minimum Targets for Resource

Conservation Degree : PGCert (Higher Education) Graduation Date : July 2010 Name of Institution : University of Nottingham Degree : M Eng (Chemical) Graduation Date : March 2003 Name of Institution : Universiti Teknologi Malaysia (UTM) Thesis title : Synthesis of Mass Exchange Network for Batch Process Systems Degree : B Eng (Chemical) (HONS) Graduation Date : August 2000 Name of Institution : Universiti Teknologi Malaysia (UTM)

Personal Particulars

Name : DOMINIC CHWAN YEE FOO Date of Birth : 12 March 1977 Nationality : Malaysian Marital Status : Married

2

Professional Involvement 1. Fellow, Institution of Chemical Engineers UK, IChemE (No: 99900916) 2. Corporate Member, Institution of Engineers, Malaysia (No: 22445). 3. Professional Engineer, Board of Engineer Malaysia (No. 13975) 4. Member, Chinese American Chemical Society, US. 5. Fellow, The Higher Education Academy, UK 6. Ordinary Member, Institute of Materials, Malaysia (IMM; No: 3493) 7. Senior Member, Asia-Pacific Chemical, Biological& Environmental Engineering Society (No: 100540). Professional involvement at the Institution of Engineers, Malaysia (IEM) • Committee member for Chemical Engineering Technical Division (CETD) since 2006 • Secretary/Treasurer for CETD (session 2010/11) • Deputy Chairman for CETD (session 2011/12) • Chairman for CETD (session 2012/13) • Subject editor for IEM Journal • Major activities: organise and deliver talks and workshops (regular), research paper competition (2007/8),

chemical engineering design competition (2012/13)

Awards 1. Awarded National Science Fellowship (NSF) scholarship from Ministry of Science, Technology and

Environment for postgraduate study (MEng: 2000 – 2002; PhD: 2003 - 2006). 2. Silver Medal for Best Presenter in Annual Workshop of National Science Fellowship 2002. 3. Awarded National Science Fellowship (NSF) scholarship from Ministry of Science, Technology and

Environment for postgraduate (PhD) study (2003 – Present). 4. 31st Int. Exhibition of Invention, New Techniques and Products. Geneva, Switzerland; 2003 (Silver

Award). 5. Industrial Art and Technology Exhibition (INATEX 2004), “Water-MATRIX - A Computer Software for

Water and Energy Reduction in Industry and Public Buildings”, Universiti Teknologi Malaysia, 6 – 8 July 2004 (Silver Award – Product category).

6. Expo Science, Technology & Innovation 2004, “Water-MATRIX - A Computer Software for Water and Energy Reduction in Industry and Public Buildings”, Putra World Trade Centre, 27 – 29 August 2004 (Silver Medal – Environmental category).

7. WaterInno Awards 2009, Water Malaysia 2009, “A Novel Process Integration Technique for Maximising Water Recovery in the Process Plant”, Putra World Trade Centre, 19 – 21 April 2009 (Silver) (contributors: Dominic Foo, Irene Chew, Denny Ng, Raymond R. Tan, Mahmoud M. El-Halwagi).

8. “Top-75 most cited articles” as published in the IChemE journals 2006 – 2009, Elsevier (#3, 4 and 23) 9. Top 20 Most Cited IChemE Papers between 2008-2010 (#19) –

www.elsevier.com/wps/find/P03.cws_home/highly_cited_papers. 10. Most Cited Chemical Engineering Research and Design Articles since 2007 - Chemical Engineering

Research and Design (4th and 9th rank of) (http://www.journals.elsevier.com/chemical-engineering-research-and-design/most-cited-articles/).

11. Innovator of the Year Award 2009 of IChemE UK - www.nottingham.edu.my/Engineering/Research/Environment/IChemEAward.aspx.

12. Young Engineer Award 2010, Institution of Engineers, Malaysia (IEM). 13. The Outstanding Young Malaysian Award 2012, Junior Chamber International (JCI). 14. Outstanding Asian Researcher and Engineer, Society of Chemical Engineers, Japan (SCEJ)

Publications

Book

1. Foo, D. C. Y., El-Halwagi, M. M. and Tan, R. R. (2012). Recent Advances in Sustainable Process

Design and Optimisation, World Scientific/Imperial College Press. 2. Foo, D. C. Y. (2012). Process Integration for Resource Conservation, CRC Press, Boca Raton,

Florida, US. 3. Foo, D. C. Y. (2012). Solution Manual for “Process Integration for Resource Conservation”, CRC

Press, Boca Raton, Florida, US.

3

Editorial

1. Foo, D. C. Y., Raman, A. A. A. and Law, C. L. (2009). IEM Journal. Vol. 70, No.4 – Special Issue on Chemical Engineering (Guest Editor).

2. Foo, D. C. Y., Raman, A. A. A. and Law, C. L. (2010). IEM Journal. Vol. 71, No.3 – Special Issue on Energy and Environment (Guest Editor).

3. Foo, D. C. Y. and Biegler, L. T. (2011). Industrial & Engineering Chemistry Research. Vol. 50, No.7 – Special Issue on Water Network Synthesis (Guest Editor).

4. Foo, D. C. Y. and Lam, H. L. (2013). Clean Technology and Environmental Policy. Vol. 15, No. 5 – Special Issue on Green Technologies for Asia-Pacific Economies (Guest Editor).

5. Foo, D. C. Y. (2013). JURUTERA. Vol. 2013, No. 9 – Special Issue on Chemical Engineering.

Book chapters

1. Majozi, T. and Foo, D. C. Y. (2008). Water Minimization in a Soft Drinks Industry – A South African Case Study, in Smith, R., Klemeš, J. and Kim, L.-K. (Eds.) Handbook of Water and Energy Management in Food Processing, Woodhead Publishing Limited, Cambridge, UK.

2. Foo, D. C. Y. Aziz, R. A., Kumaresan, S., and Tan, R. R. (2009). Process Modelling and Life Cycle Assessment for Tongkat Ali Extraction, in Lee, C. T. Muhamad I. I. (Eds.) Special Topics in Bioprocess Engineering Volume II. Penerbit Universiti Teknologi Malaysia, Skudai, Malaysia.

3. Klemeš, J., Lam, H. L. and Foo, D. C. Y. (2011). Water Integration for Recycling and Recovery in Process Industry, in Atimtay, A. T. and Sikdar, S. K. (Eds.) Security of Industrial Water Supply and Management, Springer.

4. Foo, D. C. Y. (2012). Resource Conservation through Pinch Analysis, in Foo, D. C. Y., El-Halwagi, M. M. and Tan, R. R. (Eds.) Recent Advances in Sustainable Process Design and Optimisation, World Scientific/Imperial College Press.

5. Chen, C.-L., Ciou, Y.-J., Foo, D. C. Y. (2012). Indirect Heat Integration of Batch Processes, in Foo, D. C. Y., El-Halwagi, M. M. and Tan, R. R. (Eds.) Recent Advances in Sustainable Process Design and Optimisation, World Scientific/Imperial College Press.

6. Foo, D. C. Y. and Ng, D. K. S. (2013). Process integration in the process design, in Klemeš, J., (Ed.) Handbook of process integration (in press).

7. Tan, R. R., and Foo, D. C. Y. (2013). Multi-objective pinch analysis, in Klemeš, J., (Ed.) Handbook of process integration (in press).

Refereed journal (published/in review)

1. Aziz, R. A., Sarmidi, M. R., Kumaresan, S., Taher, Z. M. and Foo, C. Y. (2003). Phytochemical Processing: The Next Emerging Field in Chemical Engineering - Aspects and Opportunities, Jurnal Kejuruteraan Kimia Malaysia, 3: 45-60.

2. Foo, C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2004). Synthesis of Mass Exchange Network for Batch Processes – Part I: Utility Targeting, Chemical Engineering Science, 59(5): 1009-1026.

3. Manan, Z. A., Tan, Y. L. and Foo, D. C. Y. (2004). Targeting the Minimum Water Flow Rate Using Water Cascade Analysis Technique, AIChE Journal, 50(12): 3169-3183.

4. Foo, C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2005). Synthesis of Mass Exchange Network for Batch Processes – Part II: Minimum Units Target and Batch Network Design, Chemical Engineering Science, 60(5): 1349-1362.

5. Foo, D. C. Y., Manan, Z. A. and Tan, Y. L. (2005). Synthesis of Maximum Water Recovery Network for Batch Process Systems, Journal of Cleaner Production, 13(15): 1381-1394.

6. Foo, D. C. Y., Kazantzi, V., El-Halwagi, M. M. and Manan, Z. A. (2006). Cascade Analysis for Targeting Property-based Material Reuse Networks, Chemical Engineering Science, 61(8): 2626-2642.

7. Foo, D. C. Y., Manan, Z. A. and El-Halwagi, M. M. (2006). Correct Identification of Limiting Water Data for Water Network Synthesis, Clean Technologies and Environmental Policy, 8(2): 96-104.

8. Athimulam, A., Kumaresan, S., Foo, D. C. Y., Sarmidi, M. R. and Aziz, R. A. (2006). Modelling and Optimisation of Eurycoma longifolia Water Extract Production, Food and Bioproducts Processing, 84(C2):139-149.

9. Foo, D. C. Y. and Manan, Z. A. (2006). Setting the Minimum Flowrate Targets for Utility Gases Using Cascade Analysis Technique, Industrial & Engineering Chemistry Research, 45(17): 5986-5995.

4

10. Ng, D. K. S. and Foo, D. C. Y. (2006). Evolution of Water Network with Improved Source Shift Algorithm and Water Path Analysis, Industrial & Engineering Chemistry Research, 45(24), 8095-8104.

11. Hul, S., Tan, R. R., Auresenia, J., Fuchino, T. and Foo, D. C. Y. (2007). Synthesis of Near-Optimal Topologically-Constrained Property-Based Water Network Using Swarm Intelligence, Clean Technologies and Environmental Policy, 9(1), 27-36.

12. Manan, Z. A., Tan, Y. L., Foo, D. C. Y. and Tea, S. Y. (2007). Application of Water Cascade Analysis Technique for Water Minimisation in a Paper Mill Plant, International Journal of Environment and Pollution, 29(1-3), 90-103.

13. Tan, R. R. and Foo, D. C. Y. (2007). Pinch Analysis Approach to Carbon-Constrained Energy Sector Planning. Energy, 32(8), 1422-1429.

14. Hul, S., Ng, D. K. S., Tan, R. R., Chiang, C. L. and Foo, D. C. Y. (2007). Crisp and Fuzzy Optimisation Approaches for Water Network Retrofit, Chemical Product and Process Modeling, 2(3), Article 6.

15. Tan, R. R., Foo, D. C. Y. and Manan, Z. A. (2007). Assessing the Sensitivity of Water Reuse Network to Noisy Mass Loads Using Monte Carlo Simulation. Computers and Chemical Engineering, 31(10), 1355-1363.

16. Tan, Y. L., Manan, Z. A. and Foo, D. C. Y. (2007). Retrofit of Water Network with Regeneration Using Water Pinch Analysis, Process Safety and Environmental Protection, 85(B4), 305-317 (23th rank in “Top-75 most cited articles” in the IChemE journals 2006 – 2009).

17. Foo, D. C. Y. (2007). Water Cascade Analysis for Single and Multiple Impure Fresh Water Feed. Chemical Engineering Research and Design, 85(A8), 1169-1177 (4th rank in “Top-75 most cited articles” in the IChemE journals 2006 – 2009).

18. Kuan, C. K., Foo, D. C. Y., Kumaresan, S., Aziz, R. A. and Tan, R. R. (2007), Streamlined Life Cycle Assessment of Residue Utilization Options in Tongkat Ali (Eurycoma longifolia) Water Extract Manufacturing Process, Clean Technologies and Environmental Policy, 9(3): 225-234.

19. Ng, D. K. S., Foo, D. C. Y. Tan, R. R. and Tan, Y. L. (2007). Ultimate Flowrate Targeting with Regeneration Placement, Chemical Engineering Research and Design, 85 (A9) 1253–1267 (3rd rank in “Top-75 most cited articles” in the IChemE journals 2006 – 2009; 8th rank of top 10 cited articles published in 2005 - 2010 - http://www.elsevier.com/wps/find/journaldescription.cws_home/713871/description#description).

20. Foo, D. C. Y., Hallale, N. and Tan, R. R. (2007). Pinch Analysis Approach to Short-Term Scheduling of Batch Reactors in Multi-Purpose Plants, International Journal of Chemical Reactor Engineering, 5: A94.

21. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2007). Targeting for Total Water Network – Part 1: Waste Stream Identification, Industrial & Engineering Chemistry Research, 46(26), 9107-9113.

22. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2007). Targeting for Total Water Network – Part 2: Waste Treatment Targeting and Interactions with Water System Elements, Industrial & Engineering Chemistry Research, 46(26), 9114-9125.

23. Hul, S., Tan, R. R., Auresenia, J., Fuchino, T. and Foo, D. C. Y. (2007). Water Network Synthesis Using Mutation-Enhanced PSO, Process Safety and Environmental Protection, 85(B6), 1-8.

24. Tan, R. R., Foo, D. C. Y., Ng, D. K. S., Chiang, C. L. Hul, S. and Ku-Pineda, V. (2007). An Approximate Mixed Integer Linear Programming (MILP) Model for The Design of Water Reuse/Recycle Networks with Minimum Emergy, Asia-Pacific Journal of Chemical Engineering Journal, 2(6), 566-574.

25. Shoaib, A. M., Aly, S. M., Awad, M. E., Foo, D. C. Y. and El-Halwagi, M. M. (2008). A Hierarchical Approach for the Synthesis of Batch Water Network, Computers & Chemical Engineering, 32(3), 530-539.

26. Tan, R. R., Col-long, K. J., Foo, D. C. Y., Hul, S. and Ng, D. K. S. (2008). A Methodology for the Design of Efficient Resource Conservation Networks Using Adaptive Swarm Intelligence, Journal of Cleaner Production, 16(7), 822-832.

27. Chan, J. H., Foo, D. C. Y., Kumaresan, S., Aziz, R. A. and Hassan, M. A. A. (2008), An Integrated Approach for Water Minimisation in a PVC Manufacturing Process, Clean Technologies and Environmental Policy, 10(1): 67-79.

28. Foo, D. C. Y. (2008). Flowrate Targeting for Threshold Problems and Plant-Wide Integration for Water Network Synthesis, Journal of Environmental Management, 88(2), 253-274.

29. Foo, D. C. Y., Ooi, M. B. L., Tan, R. R. and Tan, J. S. (2008). A Heuristic-Based Algebraic Targeting Technique for Aggregate Planning in Supply Chains, Computers and Chemical Engineering, 32(10), 2217-2232.

5

30. Foo, D. C. Y., Chew, Y. H. and Lee, C. T. (2008). Minimum Units Targeting And Network Evolution for Batch Heat Exchanger Network. Applied Thermal Engineering, 28(16), 2089-2099.

31. Foo, D. C. Y., Tan, R. R. and Ng, D. K. S. (2008). Carbon and Footprint-Constrained Energy Sector Planning Using Cascade Analysis Technique. ENERGY, 33(10), 1480-1488.

32. Ng, D. K. S., Foo, D. C. Y., Rabie, A. and El-Halwagi, M. M. (2008). Simultaneous Synthesis of Property-Based Water Reuse/Recycle and Interception Networks for Batch Processes. AIChE Journal, 54(10), 2624-2632.

33. Ng, D. K. S., Foo, D. C. Y. Tan, R. R. and Tan, Y. L. (2008). Extension of Targeting Procedure for ‘Ulltmate Flowrate Targeting with Regeneration Placement’ by Ng et al., Che. Eng. Res. Des. 85 (A9): 1253 – 1267. Chemical Engineering Research and Design, 86(10), 1182-1186.

34. Chew, I, M. L., Ng, D. K. S., Foo, D. C. Y., Tan, R. R., Majozi, T. and Gouws, J. (2008). Synthesis of Direct and Indirect Inter-Plant Water Network. Industrial & Engineering Chemistry Research, 47, 9485-9496.

35. Tan, J., Foo, D. C. Y., Sivakumar, K. and Aziz, R. A. (2008). Computer-Aided Design Tools for Debottlenecking A Batch Pharmaceutical Production, Institution of Engineers, Malaysia (IEM) Journal 69(4), 30-37.

36. Lee, S. C., Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2009). Extended Pinch Targeting Techniques for Carbon-Constrained Energy Sector Planning, Applied Energy, 86(1), 60-67.

37. Tan, R. R., Foo, D. C. Y., Aviso, K. B. and Ng, D. K. S. (2009). The Use of Graphical Pinch Analysis for Visualizing Water Footprint Constraints in Biofuel Production. Applied Energy, 86: 605-609.

38. Ng, D. K. S., Foo, D. C. Y. Tan, R. R., Pau, C. H. and Tan, Y. L., (2009). Automated Targeting for Conventional and Bilateral Property-Based Resource Conservation Network. Chemical Engineering Journal, 149: 87-101.

39. Tan, R. R., Ng, D. K. S. and Foo, D. C. Y. (2009). Pinch Analysis Approach to Carbon-Constrained Planning for Sustainable Power Generation. Journal of Cleaner Production, 17(10), 940-944.

40. Tan, R. R., Ng, D. K. S., Foo, D. C. Y. and Aviso, K. B. (2009). A Superstructure Model for the Synthesis of Single-Contaminant Water Networks with Partitioning Regenerators. Process Safety and Environmental Protection, 87, 197-205 (ranked 19th among Top 20 Most Cited IChemE Papers between 2008-2010, http://www.elsevier.com/wps/find/P03.cws_home/highly_cited_papers).

41. Foo, D. C. Y. (2009). A State-of-the-art Review of Pinch Analysis Techniques for Water Network Synthesis. Industrial & Engineering Chemistry Research, 48 (11), 5125-5159.

42. Chew, I. M. L. and Foo, D. C. Y. (2009). Automated Targeting for inter-Plant Water Integration. Chemical Engineering Journal, 153(1-3), 23-36.

43. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2009). Automated Targeting Technique for Single-Component Resource Conservation Networks – Part 1: Direct Reuse/Recycle. Industrial & Engineering Chemistry Research, 48(16), 7637-7646.

44. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2009). Automated Targeting Technique for Single-Component Resource Conservation Networks – Part 2: Single Pass and Partitioning Waste Interception Systems. Industrial & Engineering Chemistry Research, 48(16), 7647-7661.

45. Chew, I. M. L., Tan, R. R., Foo, D. C. Y. and Chiu, A. S. F. (2009). Game Theory Approach to the Analysis of Eco-Industrial Water Integration. Journal of Cleaner Production, 17(18), 1611–1619.

46. Ng, D. K. S., Foo, D. C. Y., Tan, R. R. and El-Halwagi, M. M. (2010). Automated Targeting Technique for Concentration- and Property-Based Total Resource Conservation Network. Computers and Chemical Engineering, 34(5): 825-845.

47. Tan, R. R., Ng, D. K. S. and Foo, D. C. Y. (2010). Graphical Approach to Minimum Flowrate Targeting for Partitioning Water Pretreatment Unit, Chemical Engineering Research and Design, 88(4): 393-402.

48. Bandyopadhyay, S., Sahu, G. C., Foo, D. C. Y. and Tan, R. R. (2010). Segregated Targeting for Multiple Resources Using Decomposition Algorithm, AIChE Journal, 56(5): 1235-1248.

49. Tjan, W., Tan, R. R. and Foo, D. C. Y. (2010). A Graphical Representation of Carbon Footprint Reduction for Chemical Processes. Journal of Cleaner Production, 18(9): 848-856.

50. Pękala, Ł. M., Tan, R. R., Foo, D. C. Y., Jeżowski, J. M. (2010). Optimal energy planning models with carbon footprint constraints. Applied Energy, 87(6): 1903-1910.

51. Chen, C.-L., Lee, J.-Y., Ng, D. K. S., and Foo, D. C. Y. (2010). A Unified Model of Property Integration for Batch and Continuous Processes, AIChE Journal, 56(7): 1845-1858.

52. Chew, I. M. L., Foo, D. C. Y., Ng, D. K. S., and Tan, R. R. (2010). Flowrate Targeting Algorithm for Interplant Resource Conservation Network. Part 1 – Unassisted Integration Scheme. Industrial & Engineering Chemistry Research, 49(14): 6439-6455.

6

53. Chew, I. M. L., Foo, D. C. Y. and Tan, R. R. (2010). A New Flowrate Targeting Algorithm for Interplant Resource Conservation Network. Part 2 – Assisted Integration Scheme. Industrial & Engineering Chemistry Research, 49(14): 6456-6468.

54. Foo, D. C. Y. (2010). Letter to Editor. AIChE Journal, 56 (9): 2492-2494. 55. Gouws, J., Majozi, T., Foo, D. C. Y., Chen, C. L. and Lee, J.-Y., (2010). Water Minimisation

Techniques for Batch Processes. Industrial & Engineering Chemistry Research, 49(19), 8877-8893. 56. Foo, D. C. Y. (2010). Automated Targeting Technique for Batch Process Integration. Industrial &

Engineering Chemistry Research, 49(20), 9899-9916. 57. Chen, C. L., Lee, J.-Y., Ng, D. K. S., and Foo, D. C. Y. (2010). Synthesis of Resource Conservation

Network with Sink-Source Interaction. Clean Technologies and Environmental Policy, 12(6): 613-625.

58. Tan, R. R., Ng, D. K. S. Foo, D. C. Y. and Aviso, K. B. (2010). Crisp and Fuzzy Integer Programming Models for Optimal Carbon Sequestration Retrofit in the Power Sector. Chemical Engineering Research and Design, 88(12): 1580-1588.

59. Chew, I. M. L., Thillaivarrna, S. L., Tan, R. R. and Foo, D. C. Y. (2011). Analysis of Inter-plant Water Integration with Indirect Integration Schemes through Game Theory Approach – Pareto Optimal Solution with Interventions. Clean Technologies and Environmental Policy, 13(1): 49-62.

60. Aviso, K. B. Tan, R. R., Culaba, A. B., Foo, D. C. Y., Hallale, N. (2011). Fuzzy Optimization of Topologically Constrained Eco-Industrial Resource Conservation Networks with Incomplete Information. Engineering Optimisation, 43(3): 257-279.

61. Saw, S. Y., Lee, L., Lim, M. H., Foo, D. C. Y., Chew, I. M. L., Tan, R. R. and Klemeš, J. (2011). An Extended Graphical Targeting Technique for Direct Reuse/Recycle in Concentration- and Property-Based Resource Conservation Networks. Clean Technologies and Environmental Policy, 13(2): 347-357.

62. Wong W. H., Foo, D. C. Y. and Tan, R. R., (2011). Chronologically Constrained Composite Curves for Carbon Constrained Agricultural Planning. Biomass & Bioenergy, 35(5): 1716-1720.

63. Nun, S., Tan, R. R., Razon, L. F., Foo, D. C. Y. and Egashirad, R. (2011). Fuzzy Automated Targeting for Trade-Off Analysis in Batch Water Networks, Asia-Pacific Journal of Chemical Engineering Journal, 6(3): 537-551.

64. Chen, C. L., Lee, J.-Y., Ng, D. K. S., and Foo, D. C. Y. (2011). Property Integration for Resource Conservation Network Synthesis in Palm Oil Mills. Chemical Engineering Journal, 169 (1-3): 207-215.

65. Chen, C. L., Lee, J.-Y., Ng, D. K. S., and Foo, D. C. Y. (2011). Synthesis of Property-based Resource Conservation Network in Palm Oil Mills with Time-varying Process Disturbance. Clean Technologies and Environmental Policy, 13(4): 625-632.

66. Deng, C., Feng, X., Ng, D. K. S., and Foo, D. C. Y. (2011). Process-based Graphical Approach for Simultaneous Targeting and Design of Water Network, AIChE Journal, 57(11): 3085-3104.

67. Alshekhli, O., Foo, D. C. Y., Hii, C. L. and Law, C. L. (2011). Process Simulation and Debottlenecking for An Industrial Cocoa Manufacturing Process. Food and Bioproducts Processing 89(4): 528-536.

68. Khor, C. S., Foo, D. C. Y., El-Halwagi, M. M., Tan, R. R. and Shah, N. (2011). A Superstructure Optimization Approach for Membrane Separation-Based Water Regeneration Network Synthesis with Detailed Nonlinear Mechanistic Reverse Osmosis Model. Industrial & Engineering Chemistry Research: 50(23), 13444-13456.

69. Safri, N. H. M., Mel, M., Foo, D. C. Y., Ng, D. K. S. and Chew, I, M. L. (2012). Process modelling and debottlenecking study of a vaccine production, IIUM Engineering Journal, Vol. 13(1): 97-107.

70. Chew, I. M. L., Foo, D. C. Y., Bonhivers, J.-C., Stuart, P., Alva-Argaez, A. Savulescu, L. E., (2012), A Model-based Approach for Simultaneous Water and Energy Reduction in a Pulp and Paper Mill. Applied Thermal Engineering, 51(1–2): 393-400.

71. Tan, R. R., Lam, H. L., Kasivisvanathan, H., Ng, D. K. S., Foo, D. C. Y., Abdul Aziz, M. K., Hallale, N., Klemeš, J. J. (2012). An Algebraic Approach to Identifying Bottlenecks in Linear Process Models of Multi-Functional Energy Systems. Theoretical Foundations of Chemical Engineering, 46(6): 642-650.

72. Soo, S. S. T., Toh, E. L., Yap, K. K. K., Ng, D. K. S. and Foo, D. C. Y. (2013). Synthesis of Decentralised Wastewater Treatment Networks for One- and Two-Contaminant Systems. Chemical Engineering Research and Design, 91(1): 106–119.

73. Hortua, A. C., El-Halwagi, M. M., Ng, D. K. S., and Foo, D. C. Y. (2013). An Integrated Approach for Simultaneous Mass and Property Integration. Sustainable Chemistry and Engineering, 1(1), 29–38.

74. Foo, D. C. Y. (2013). A Generalised Guideline for Process Changes for Resource Conservation Networks. Clean Technologies and Environmental Policy, 15(1), 45-53.

7

75. Tan, Y. L., Ng, D. K. S., El-Halwagi, M. M., Foo, D. C. Y., Samyudia, Y. (2013). Synthesis of Heat Integrated Resource Conservation Networks with Varying Operating Parameters. Industrial & Engineering Chemistry Research, 52(22): 7196-7210.

76. Diamante, J. A. R., Tan, R. R., Foo, D. C. Y., Ng, D. K. S., Aviso, K. B., Bandyopadhyay, S. (2013). A Graphical Approach to Pinch-Based Source-Sink Matching and Sensitivity Analysis in Carbon Capture and Storage Systems. Industrial & Engineering Chemistry Research, 52(22): 7211-7222.

77. Foo, D. C. Y., Tan, R. R., Lam H. L., Kamal, M., Klemeš, J. J. (2013). Robust Models for the Synthesis of Flexible Palm Oil-Based Regional Bioenergy Supply Chain. ENERGY, 55: 68-73.

78. Lee, J.-Y. Chen, C.-L., Wen, T. L., Ng, D. K. S., Foo, D. C. Y. and Wang, T.-C. (2013). Synthesis and Design of Chilled Water Networks Using Mathematical Optimization. Applied Thermal Engineering 58 (2013) 638-649.

79. Ooi, R. E. H., Foo, D. C. Y., Tan, R. R., Ng, D. K. S. and Smith, R. (2013). Carbon Constrained Energy Planning (CCEP) for Sustainable Power Generation Sector with Automated Targeting Model. Industrial & Engineering Chemistry Research, 52: 9889−9896.

80. Ooi, R. E. H., Foo, D. C. Y. and Tan, R. R. (2014). Targeting for Carbon Sequestration Retrofit Planning in the Power Generation Sector for Multi-Period Problems. Applied Energy, 113, 477-487.

81. M. F. Kamuri, Foo, D. C. Y. and Mel, M. (2013). Batch Process Modelling and Economic Evaluation of Glucuronidase Enzyme Production, Journal of Bioprocessing & Biotechniques (in press).

82. Foo, D. C. Y., Lee, J.-Y., Ng, D. K. S., and Chen, C. L. (2013). Targeting and Design for Batch Regeneration and Total Networks. Clean Technologies and Environmental Policy (in press).

83. Ooi, R. E. H., Foo, D. C. Y., Ng, D. K. S. and Tan, R. R. (2013). Planning of Carbon Capture and Storage with Pinch Analysis Techniques. Chemical Engineering Research and Design (in press).

84. Sahu, G. C., Bandyopadhyay, S., Foo, D. C. Y., Ng, D. K. S., and Tan, R. R. (2013). Targeting for Optimal Grid-Wide Deployment of Carbon Capture and Storage (CCS) Technology. Process Safety and Environmental Protection (in press).

85. Tan, Y. L., Ng, D. K. S., Foo, D. C. Y., El-Halwagi, M. M., Samyudia, Y. (2013). Floating Pinch Technique for Utility Targeting in Heat Exchanger Network (HEN), Chemical Engineering Research and Design (in press).

86. Chen, C.-L., Chun-Yen Lin, Lee, J.-Y. and Foo, D. C. Y. (2013). A Two-Stage Approach for the Synthesis of Inter-Plant Water Networks Involving Continuous and Batch Unit. Chemical Engineering Research and Design (in press).

Magazines 1. Foo, D. C. Y., Manan, Z. A., Selvan, M., and McGuire, M. L. (2005). Integrate Process Simulation and

Process Synthesis, Chemical Engineering Progress, 101(10): 25-29 (October 2005). 2. Aziz, R. A., Sarmidi, M. R., Kumaresan, S., and Foo, D. C. Y. (2005). Engineering Aspects of Herbal

and Phytochemical Processing: A Malaysian Perspective, JURUTERA - The Monthly Bulletin of The Institution of Engineers, Malaysia (IEM), 2005(12): 10-19 (December 2005).

3. Foo, D. C. Y. (2006). Use Process Integration to Set Reuse and Recycling Targets, Bulletin of Institution of Engineers, Malaysia (IEM), 2006(4): 8-14 (April 2006).

4. Foo, D. C. Y., Manan, Z. A. and Tan, Y. L. (2006), Use Cascade Analysis to Optimize Water

Networks, Chemical Engineering Progress, 102(7): 45-52 (July 2006). 5. Tan, J., Foo, D. C. Y., Kumaresan, S. and Aziz, R. A. (2006). Debottlenecking of a Batch

Pharmaceutical Cream Production, Pharmaceutical Engineering, July/August 2006, 72-84. 6. Tan, J., Foo, D. C. Y., Kumaresan, S. and Ramlan, A. A. (2008). Evaluation of Pharmaceutical

Production Expansion Plan via Batch Process Simulation, JURUTERA - The Monthly Bulletin of The Institution of Engineers, Malaysia (IEM), 2008(11): 16-19 (November 2008).

7. Foo, D. C. Y., Hallale, N. and Tan, R. R. (2010). Optimize Shift Scheduling Using Pinch Analysis. Chemical Engineering, July 2010: 48-52.

8. Foo, D. C. Y. (2013). Resource Conservation with Process Integration. Chemical Technology, February 2013: 30-33.

9. Lim, J. S. H., Foo, D. C. Y., Ng, D. K. S., Aziz, R. and Tan, R. R. (2013). Pinch Analysis for Production Planning in Manufacturing Industries, Chemical Engineering, August 2013, 40-45.

10. Noor, N. Z. M., Foo, D. C. Y., Rahman, B. A. and Aziz, R. A. (2014). Modelling and Uncertainty Analysis for Pilot Scale Monoclonal Antibody Production. Pharmaceutical Engineering (in review).

8

Plenary/Keynote Presentation (Research Conferences) 1. Aziz, R. A., Kumaresan, S., Taher, Z. M. and Foo, D. C. Y., (2003). Phytochemical Processing: The

Next Emerging Field in Chemical Engineering: Aspects and Opportunities, International Conference on Chemical and Bioprocess Engineering (ICCBPE 2003), Sabah.

2. Foo, D. C. Y. (2006). Targeting the Minimum Number of Units and Network Evolution Techniques for

a Batch Heat Exchanger Network, 9th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2006) in conjunction with 17th International Congress of Chemical and Process Engineering (CHISA), Prague, Czech Republic.

3. Ng, D. K. S., Rabie, A., El-Halwagi, M. M., and Foo, D. C. Y. (2007). Simultaneous Synthesis of Property-Based Water Reuse/Recycle and Interceptions Networks for Batch Processes, 10th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2007), Italy.

4. Foo, D. C. Y. (2008). On Pinch-Based Review for Water Network Synthesis – From Fixed Load to Fixed Flowrate Problems, 11th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2008) in conjunction with 18th International Congress of Chemical and Process Engineering (CHISA), Prague, Czech Republic.

5. Klemeš, J., Lam, H. L. and Foo, D. C. Y. (2009). Water recycling & recovery, Total Food 2009, Norwich, UK. (Plenary Lecture)

6. Lee, J.-Y., Chen, C.-L., Ng, D. K. S., and Foo, D. C. Y. (2009). Synthesis of the Property-Based Water-Using Networks in Batch Process Industries, 12th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2009), Rome, Italy.

7. Klemeš, J., Lam, H. L. and Foo, D. C. Y. (2009). Water Minimisation, Recycling and Recovery – Implementation to the Process Industry, Slovenian Chemical Days 2009, Slovenia.

8. Tan, R. R., Ng, D. K. S., Foo, D. C. Y., Aviso, K. B. (2009). Optimal Deployment of Carbon Dioxide Capture in the Power Sector Using Fuzzy Boolean Programming, Regional Symposium on Chemical Engineering (RSCE 2009), Philippines.

9. Foo, D. C. Y. and Tan, R. R. (2010). Recent Trends In Process Integration Techniques for Emission and Environmental-Footprint Problems. The 5th International Symposium on Design, Operation and Control of Chemical Processes (PSE Asia 2010), Singapore.

10. Foo, D. C. Y. Gouws, J., Majozi, T., Lee, J.-Y., Chen, C.-L., (2010). A State-of-the-Art Review on Pinch Analysis Techniques for the Synthesis of Batch Water Network. 13th Asia Pacific Confederation of Chemical Engineers (APCChE 2010), Taiwan.

11. Foo, D. C. Y. (2011). Process Integration Techniques for CO2 Mitigation. International Conference on Advances in Energy Research (ICAER2011), Mumbai, India.

12. Foo, D. C. Y. (2012). Waste and Carbon Footprint Reduction with Process Integration. International Conference on Process Engineering & Advanced Materials (ICPEAM 2012), Kuala Lumpur.

13. Ooi, R. E. H., Foo, D. C. Y., Ng, D. K. S., Tan, R. R. (2012). Graphical Targeting Tool for the Planning of Carbon Capture and Storage, 15th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2012) in conjunction with 20th International Congress of Chemical and Process Engineering (CHISA), Prague, Czech Republic.

Keynote/Invited Speech (Commercial/Trade Conferences) 1. Aziz, R. A., and Foo, D. C. Y., (2006). Phytochemical Process Optimisation of Herbal Extraction for

Bioactive Components, 3rd Asia Pacific Natural Product Expo (NATPRO 2006), Kuala Lumpur. 2. Papavasileiou, V. and Foo, D. C. Y. (2008). Analysis & Optimization of Monoclonal Antibodies

Production Facilities with Simulation & Scheduling Tools, Technology Transfer for Biopharmaceuticals Asia, Singapore.

3. Foo, D. C. Y. (2009). Leveraging on Water Pinch Analysis (WPA) to Maximise Water Recovery & Cost Savings in Industrial Plants. Plant Integrity Management Conference, Jakatra, Indonesia.

4. Foo, D. C. Y. (2010). Optimizing Resource Conservation for Process Plant with Process Integration, Process Plant Debottlenecking and Optimisation, Kuala Lumpur.

5. Foo, D. C. Y. (2012). Process Integration – A Promising Tool for Optimising Process Plant Resources. Total Plant Management, Kuala Lumpur.

6. Foo, D. C. Y. (2013). Productivity Enhancement and Resource Conservation With Process Integration Techniques. Seminar on Excellence in Manufacturing.

9

International Conferences 1. Lim, L. P., Ripin, A., Yunus, R. M. and Foo, D. C. Y., (2000). Re-refining of Base Oil from Used

Lubricant Oil: A Method to Formulate Efficient Potassium Hydroxide (KOH) Effect, paper presented in Regional Symposium on Chemical Engineering (RSCE 2000), National University of Singapore.

2. Tan, Y. L., Manan, Z. A. and Foo, D. C. Y., (2002) Water Minimisation by Pinch Technology – Water

Cascade Table for Minimum Water and Wastewater Targeting, paper presented in 9th Asian Pacific Confederation of Chemical Engineering (APCChE 2002), New Zealand (Best Working Paper from Malaysia).

3. Foo, D. C. Y., Manan, Z. A., Yunus, R. M., Aziz, R. A. and Tan, Y. L., (2002) Water Minimisation for

Batch Process Systems – A Pinch Technology Approach, paper presented in 2nd World Engineering Congress (WEC 2002), Sarawak.

4. Foo C. Y., Yunus, R. M., Tea, S. S., (2002). Modeling and Simulation of Used Lubricant Oil Re-refining Process, paper presented in 2nd World Engineering Congress (WEC 2002), Sarawak.

5. Chow, A. W., Foo C. Y., Yunus, R. M., Aziz, R. A. and Manan, Z. A., (2002). Pilot Scale Rectification

Column Modelling and Design for The Separation of Fatty Acid Mixture, paper presented in Regional Symposium on Chemical Engineering (RSCE 2002), Kuala Lumpur.

6. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2002). Synthesis of Mass Exchange

Network for Batch Process Systems. Part 1: Calculation of Utility Targets, paper presented in Regional Symposium on Chemical Engineering (RSCE 2002), Kuala Lumpur.

7. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A. (2003). Synthesis of Mass Exchange Network for Batch Processes. Part 2: Batch Network Design, paper presented in International Conference on Chemical and Bioprocess Engineering (ICCBPE 2003), Sabah.

8. Foo, D. C. Y., Manan, Z. A. and Aziz, R. A. (2003). Water Cascade Analysis Technique for Minimum

Flowrate Targeting: Tabular and Numerical Approach, paper presented in International Conference on Chemical and Bioprocess Engineering (ICCBPE 2003), Sabah.

9. Foo, D. C. Y., Manan, Z. A. and Aziz, R. A. (2003). Synthesis of Maximum Water Recovery Network for Batch Process Systems, paper presented in 6th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2003) in conjunction with 53rd Canadian Chemical Engineering Conference, Hamilton, Canada.

10. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A. (2003). Synthesis of Mass Exchange

Network for Batch Process Systems. Part 3: Targeting and Design for Network with Mass Storage System, paper presented in AIChE Annual Meeting 2003, San Francisco.

11. Manan, Z. A. and Foo, D. C. Y. (2003). Setting Targets for Water and Hydrogen Networks Using Cascade Analysis, paper presented in AIChE Annual Meeting 2003, San Francisco.

12. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A. (2003). Synthesis of Mass Exchange Network for Batch Process Systems. Part 4: Minimum Units Targeting and Network Evolution, paper presented in to Regional Symposium on Chemical Engineering (RSCE 2003), Manila.

13. Foo, D. C. Y., Manan, Z. A., Kazantzi, V., Almutlaq, A. M. and El-Halwagi, M. M. (2004). Material-Reuse Targeting Using Property-Based Surplus Technique, paper presented in 4th International Symposium on Process Integration in conjunction with 54th Canadian Chemical Engineering Conference, Calgary, Canada.

14. Kazantzi, V., Foo, D. C. Y., Manan, Z. A., Almutlaq, A. M. and El-Halwagi, M. M. (2004). Resource Conservation and Waste Minimization for Property Networks Using Cascade Analysis, paper presented in AIChE Annual Meeting 2004, Austin, Texas.

15. Tan, J., Foo, D. C. Y., Kumaresan, S., Aziz, R. A., Koulouris, A. (2004). Evaluation of Debottlenecking Strategies for A Liquid Medicine Production Utilising Batch Process Simulation, paper presented in International Conference of Computational Methods in Sciences and Engineering 2004 (ICCMSE 2004), Attica, Greece.

16. Athimulam, A., Kumaresan, S., Foo, D. C. Y., Sarmidi, M. R. and Aziz, R. A. (2005). Modelling and Optimisation of Tongkat Ali Water Extract Production Utilising A Batch Process Simulator, paper presented in 2nd International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management (HNICEM 2005), Manila, Philippines.

17. Foo, D. C. Y. and Manan, Z. A. (2005), Setting Right Targets for Water Recovery Network Using Water Cascade Analysis Technique, paper presented in 2nd International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management (HNICEM 2005), Manila, Philippines.

18. Tan, J., Foo, D. C. Y., Kumaresan, S., Aziz, R. A., (2005). Evaluation of Pharmaceutical Cream

Production Debottlenecking Schemes, paper presented in Process System Engineering (PSE Asia 2005), Seoul, Korea.

10

19. Kazantzi, V., Qin, X., Foo, D. C. Y. and El-Halwagi, M. M. (2005). Pollution Prevention through Property-Based Design, paper presented in AIChE Annual Meeting 2005, Cincinnati, Ohio.

20. Foo, D. C. Y. and Manan, Z. A. (2005), Optimisation of Regeneration Unit to Achieve Zero Discharge in A Paper Mill, paper presented in the 2nd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2005), Sabah.

21. Chan, J. H., Foo, D. C. Y., Kumaresan, S., Aziz, R. A. and Hassan, M. A. A. (2005), Process Modelling of A PVC Production Plant, paper presented in the 2nd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2005), Sabah.

22. Kuan, C. K., Foo, D. C. Y., Kumaresan, S., Aziz, R. A. and Tan, R. R. (2005), Life Cycle Analysis of

Tongkat Ali (Eurycoma Longifolia) Extract Manufacturing Process, poster presented in the 2nd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2005), Sabah.

23. Foo, D. C. Y., Kumaresan, S., Aziz, R. A. and Sarmidi, M. R. (2005), The Use of Computer-Aided Process Design and Simulation Tools in Undergraduate Research Projects, paper presented in Regional Conference on Engineering Education (RCEE 2005), Johor Bahru.

24. Foo, D. C. Y. (2006). Water Cascade Analysis Technique for Targeting Minimum Water Flowrates in Threshold Problems, paper presented in the 9th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2006) in conjunction with 17th International Congress of Chemical and Process Engineering (CHISA), Praha, Czech Republic.

25. Tan, J., Foo, D. C. Y., Sivakumar, K. and Aziz, R. A. (2006). Debottlenecking of a Batch Pharmaceutical Eye Drop Production, paper presented in the 9th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2006) in conjunction with 17th International Congress of Chemical and Process Engineering (CHISA), Praha, Czech Republic.

26. Foo, D. C. Y. and Manan, Z. A. (2006). Targeting for Utility Gases Reuse/Recycle via Process Integration, paper presented in International Conference on Environment (ICENV2006).

27. Chiang, C. L. and Foo, D. C. Y. (2006). Application of Source Shifts Algorithm in Retrofitting Existing Water Network in a Paper Mill, paper presented in International Conference on Environment (ICENV2006).

28. Ng, D. K. S., Foo, D. C. Y., Kazantzi, V. and El-Halwagi, M. M. (2006). Cascade Analysis Technique for Targeting Property-Based Material Reuse/Recycle Network, paper presented in AIChE Annual Meeting 2006, San Francisco.

29. Ng, D. K. S., Foo, D. C. Y., Tan, R. R. and Tan, Y. L. (2006). Targeting for Total Water Network

Based on Pinch Analysis, paper presented in AIChE Annual Meeting 2006, San Francisco. 30. Hul, S., Tan, R. R., Auresenia, J., Fuchino, T. and Foo, D. C. Y. (2006). Application of Particle Swarm

Optimization in Material Reuse/Recycle Network Topology, paper presented in Regional Symposium on Chemical Engineering (RSCE 2006), Singapore.

31. Ng, D. K. S. and Foo, D. C. Y. (2006). A Systematic Approach for Water Network Evolution by Improved Source Shift Algorithm, paper presented in 2006 Symposium on Process System Engineering, Taiwan.

32. Chiang, C. L., Hul, S., Ng, D. K. S., Tan, R. R. and Foo, D. C. Y. (2006). A Linear Programming Model for Retrofit A Paper Mill Plant, paper presented in 2006 Symposium on Process System Engineering, Taiwan.

33. Foo, D. C. Y. and Tan, R. R. (2007). Targeting for Minimum Low and Zero-Carbon Energy Resources in Carbon-Constrained Energy Sector Planning Using Cascade Analysis, paper presented in the 10th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2007).

34. Y. L. Tan, Foo, D. C. Y., Tan, R. R. and Ng, D. K. S. (2007). Approximate Graphical Targeting for Water Network with Two Contaminants, paper presented in the 10th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2007).

35. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2007). Waste Streams Identification for Water Network, paper presented in the 10th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2007).

36. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2007). Interaction between Water Regeneration and Waste Treatment for Total Water Network, paper presented in Process System Engineering (PSE Asia 2007), Xi’an, China

37. Chew, I. M. L., Ng, D. K. S. and Foo, D. C. Y. (2007). Graphical Targeting for Plant-Wide Water Integration, paper presented in Joint Symposium for Chemical and Metallurgical Engineering, South Africa.

11

38. Rabie, A., El-Halwagi, M. M., Foo, D. C. Y. and Ng, D. K. S. (2007). Optimal Synthesis, Scheduling, And Operation of Batch Water-Recycle Networks with Interception, paper presented in AIChE Annual Meeting 2007, Salt Lake City.

39. Chew, I, M. L., Tan, R. R., Foo, D. C. Y. and Chiu, A. S. F. (2007). Game Theory Approach to the Analysis of Eco-Industrial Water Conservation, Reuse and Recycle Networks, paper presented in the International Conference on Hydrology and Water Resources Management for Hazard Reduction and Sustainable Development (HRSD 2007), Manila, Philippines.

40. Shoaib, A. M., Aly, S. M., Awad, M. E., Foo, D. C. Y. and El-Halwagi, M. M. (2007). Combined Pinch and Mathematical Optimization Approaches for the Synthesis of Batch Water Network, paper presented in The 7th Egyptian Syrian Conference in Chemical and Petroleum Engineering, Suez, Egypt.

41. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2008). Automated Targeting Technique for Resource Conservation Networks, paper presented in ASIA WATER 2008 Conference, Kuala Lumpur.

42. Chew, I, M. L., Ng, D. K. S., Foo, D. C. Y., Tan, R. R., Majozi, T. and Gouws, J. (2008). Synthesis of Inter-Plant Water Network, paper presented in ASIA WATER 2008 Conference, Kuala Lumpur.

43. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2008). Automated Targeting Technique for Segregated Energy Planning, paper presented in EMINENT (Early Market Introduction of New ENergy Technologies) Workshop, Veszprem, Hungary.

44. Deng, C., Feng, X., Ng, D. K. S. and Foo, D. C. Y. (2008). Process-based Graphical Approach (PGA) for Simultaneous Targeting and Design of Regeneration Recycling Water Networks, paper presented in the 12th Asia Pacific Confederation of Chemical Engineers (APCChE 2008), Dalian, China.

45. Tan, Y. L., Pau, C. H., Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2008). Automated Targeting for Property Integration, paper presented in AIChE Annual Meeting 2008, Philadelphia.

46. Thillaivarrna, S. L., Chew, I, M. L., Foo, D. C. Y. and Tan, R. R. (2008). Game Theory Approach to the Analysis of Inter-plant Water Integration, paper presented in the 15th Regional Symposium on Chemical Engineering (RSCE 2008), Kuala Lumpur.

47. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2008). Automated Targeting Technique for Total Water Network, paper presented in the 15th Regional Symposium on Chemical Engineering (RSCE 2008), Kuala Lumpur.

48. Chew, I, M. L., Ng, D. K. S., Foo, D. C. Y., Tan, R. R., Majozi, T. and Gouws, J. (2008). Synthesis of Indirect Inter-Plant Water Network with Regeneration Unit, paper presented in the 15th Regional Symposium on Chemical Engineering (RSCE 2008), Kuala Lumpur.

49. Leong, M, K. Y., Ng, D. K. S. and Foo, D. C. Y. (2008). Targeting for Hybrid Chilled and Cooling Water System, paper presented in the 15th Regional Symposium on Chemical Engineering (RSCE 2008), Kuala Lumpur.

50. Mel, M., Salleh, H. M., Foo, D. C. Y. and Kamuri, M. F. (2008). Batch Process Modelling and Economic Analysis of Glucuronidase Enzyme Production, paper presented in the 15th Regional Symposium on Chemical Engineering (RSCE 2008), Kuala Lumpur.

51. Chew, I, M. L., Foo, D. C. Y., Mazlan, M. M. and Ho, P. Y. C. Inter-Plant Water Integration: A Case Study for a Malaysia Integrated Iron and Steel Mill, paper presented in the International Conference on Environment (ICENV2008), Penang, Malaysia.

52. Shoaib, A. M., Aly, S. M., Awad, M. E., Foo, D. C. Y. and El-Halwagi, M. M. (2009). A Mathematical Optimisation Approach for Batch Water Network Synthesis with Multi-Contaminant Problems, paper presented in the 11th International Conference on Mining, Petroleum and Metallurgical Engineering (MPM11), Suez Canal University, Egypt.

53. Tan, R. R. and Foo, D. C. Y. (2009). Recent Trends in Pinch Analysis for Carbon Emissions and Energy Footprint Problems, paper presented in the 12th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2009), Rome, Italy.

54. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2009). Automated Targeting for Resource Conservation Network with Interception Placement, paper presented in the 12th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2009), Rome, Italy.

55. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2009). Automated targeting for total property network with Bilateral Constraints, paper presented in the Seventh International Conference on the Foundations of Computer-Aided Process Design (FOCAPD 2009), Colorado, US.

56. Lovelady, E. M., El-Halwagi M. M., Chew, I, M. L., Ng, D. K. S. Foo, D. C. Y. and Tan, R. R. (2009). A Property-Integration Approach to the Design and Integration of Eco-Industrial Parks, paper presented in the Seventh International Conference on the Foundations of Computer-Aided Process Design (FOCAPD 2009), Colorado, US.

12

57. Ng, D. K. S., Foo, D. C. Y. Tan, R. R., El-Halwagi, M. M. (2009). Automated Targeting for Total Property-based Network, paper presented in the 19th European Symposium on Computer Aided Process Engineering (ESCAPE-19).

58. Chew, I. M. L., Foo, D. C. Y., Ng, D. K. S., Tan, R. R., Saw, S. Y., Lee, L., Lim, M. H., Klemeš, J. and El-Halwagi, M. M. (2009). Flowrate targeting for inter-plant water network. 8th World Congress of Chemical Engineering (WCCE), Montreal, Canada.

59. Tan, R. R., Ng, D. K. S. and Foo, D. C. Y. (2009). An Optimization Model for Optimal Carbon Sequestration Retrofit in the Power Sector, paper presented in the 3rd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2009), Sabah.

60. Saw, S. Y., Lee, L., Lim, M. H., Foo, D. C. Y., Chew, I. M. L., Onyedim, V. F. O., Tan, R. R., Klemeš, J. (2009). A New Graphical Targeting Procedure for Water Minimisation, paper presented in the 3rd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2009), Sabah.

61. Ch’ng, P. K., Wong, W. H., Pitchaimuthu, D., Tjan, W., Foo, D. C. Y. and Tan, R. R. (2009). Pinch Analysis Approach to Carbon-Constrained Planning for Carbon Sequestration Retrofit in the Power Sector, paper presented in the 3rd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2009), Sabah.

62. Aviso, K. B. Tan, R. R., Culaba, A. B., Foo, D. C. Y., Hallale, N. (2009). Designing Eco-Industrial Resource Conservation Networks Using Fuzzy Mixed Integer Linear Programming, paper presented in the 3rd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2009), Sabah.

63. Mel, M., Safri, N. H. M., Foo, D. C. Y., Ng, D. K. S. and Chew, I. M. L. (2009). Process Modeling and Debottlenecking Study of a Vaccine Production, paper presented in CHEMECA 2009, Perth, Australia.

64. Aviso, K. B. Tan, R. R., Culaba, A. B., Foo, D. C. Y., (2009). Designing Property Based Material Exchange Networks in Eco-Industrial Parks Using Fuzzy Mixed Integer Linear Programming, paper presented in the 11th Science and Technology Congress, Manila, Philippines.

65. Saw, S. Y., Lee, L., Lim, M. H., Foo, D. C. Y., Chew, I. M. L., Tan, R. R. (2009). Targeting for Resource Conservation Network with Material Surplus Composite Curves, paper presented in 2nd CUTSE International Conference.

66. Sahu, G. C., Bandyopadhyay, S., Foo, D. C. Y. and Tan, R. R. (2009). Optimised Multiple Designs for A Segregated Planning Water Using System, paper presented in the Advances in Energy Research (ICAER 2009), India.

67. Foo, D. C. Y., Ng, D. K. S., Tan, R. R. and Smith, R. (2010). Automated Targeting Technique to Carbon-Constrained Planning for Carbon Sequestration Retrofit in the Power Sector, paper presented in the International Conference on Applied Energy (ICAE2010), Singapore.

68. Soo, S. S. T., Toh, E. L., Yap, K. K. K., Ng, D. K. S. and Foo D. C. Y. (2010).Targeting for Minimum Flowrate for Multiple Treatment Processes, paper presented in 1st International Congress on Process Engineering and Advanced Materials (ICPEAM2010), Kuala Lumpur.

69. Nun, S., Tan, R. R., Razon, L. F., Foo, D. C. Y. and Egashirad, R. (2010). Automated Targeting for Batch Water Network with Uncertainties, paper presented in Process System Engineering (PSE Asia 2010), Singapore.

70. Chen, C. L., Lee, J.-Y., Ng, D. K. S., and Foo, D. C. Y. (2010). Synthesis of Resource Conservation Network for the Clay Bath System in Palm Oil Mills. 13th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2010) in conjunction with 19th International Congress of Chemical and Process Engineering (CHISA), Prague, Czech Republic.

71. Lam H. L., Foo, D. C. Y., Kamal, M., Klemeš, J. J. (2010). Synthesis of Regional Energy Supply Chain Based on Palm Oil Biomass. 13th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2010) in conjunction with 19th International Congress of Chemical and Process Engineering (CHISA), Prague, Czech Republic.

72. Tan, R. R., Aviso, K. B., Razon, L. F., Tay, D. H. S., Ng, D. K. S., Foo, D. C. Y. (2010). An Input-Output Based MILP Model for Synthesis of Multifunctional Energy Systems with Life Cycle Considerations, paper presented in the 13th Asia Pacific Confederation of Chemical Engineers (APCChE 2010), Taiwan.

73. Ooi, R. E. H., Foo, D. C. Y. and Tan, R. R. (2011). Multi Period Planning on Grid-Wide Carbon Sequestration Retrofit in Power Generation Sector with Pinch Analysis. Fourth International Conference on Modeling, Simulation and Applied Optimization (ICMSAO-2011), Kuala Lumpur.

74. Chew, I. M. L., Foo, D. C. Y., Lam H. L., Bonhivers, J.-C., Stuart, P., Savulescu, L. E., Alva-Argaez, A. (2011), Simultaneous Water and Energy Optimization for a Pump and Paper Mill, 14th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2011), Florence, Italy (Chemical Engineering Transactions, 2011, 25, 441-446).

13

75. Chen, C. L., Lin, C.-Y., Lee, J.-Y. and Foo, D. C. Y. (2011). Synthesis of Inter-Plant Water Networks Involving Batch and Continuous Processes, 14th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2011), Florence, Italy.

76. Foo, D. C. Y., Tan, R. R., Lam H. L., Kamal, M., Klemeš, J. J. (2011). Synthesis of Flexible Palm Oil-Based Regional Energy Supply Chain. 21st European Symposium on Computer Aided Process Engineering (ESCAPE-21), Chalkidiki, Greece.

77. Lam H. L., Foo, D. C. Y., Ng, D. K. S., Hassim, M. H., Kamal, M. (2011). Integration of Industrial Waste Oil, Biomass and Municipal Wastes into Malaysian Urban Area Energy Supply Chain. 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, Dubrovnik.

78. V. F. O., Onyedim, Ng, D. K. S. and Foo, D. C. Y. and Tan, R. R. (2011). Retrofit of Water Network in a Chlor-alkali Plant, paper presented in the International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB) in conjunction with the 21st Symposium of Malaysian Chemical Engineers (SOMChE 2011), Kuantan, Malaysia.

79. Tan, R. R., Ooi, R. E. H., Foo, D. C. Y., Ng, D. K. S., Aviso K. B. and Bandyopadhyay, S. (2012). A Graphical Approach to Optimal Source-Sink Matching in Carbon Capture and Storage Systems with Reservoir Capacity and Injection Rate Constraints. Process System Engineering (PSE 2012), Singapore.

80. Chew, I. M. L., Foo, D. C. Y., Bonhivers, J.-C., Stuart, P., Alva-Argaez, A., Savulescu, L. E., (2012), Simultaneous Water and Energy Minimization for Brown Stock Washing System, Process System Engineering (PSE 2012), Singapore.

81. Tan, Y. L., Ng, D. K. S., El-Halwagi, M. M., Samyudia, Y., Foo, D. C. Y., Synthesis of Heat-Integrated Resource Conservation Networks, Process System Engineering (PSE 2012), Singapore.

82. Liew, W. H., Hassim M. H., Ng, D. K. S. and Foo, D. C. Y. (2012). Fuzzy Optimization for Screening of Sustainable Chemical Reaction Pathway Synthesis, 15th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2012) in conjunction with 20th International Congress of Chemical and Process Engineering (CHISA), Prague, Czech Republic.

83. Lee, S. H., Chew, I. M. L., Ng, D. K. S. and Foo, D. C. Y. (2012). Optimization of a Gasification-based Integrated Biorefinery for Pulp and Paper Industry, CHEMECA 2012, New Zealand.

84. Diamante, J. A., Tan, R. R., Ooi, R. E. H., Foo, D. C. Y., Ng, D. K. S., Aviso, K. B., Bandyopadhyay, S. (2012). Graphical Uncertainty Analysis of Source-Sink Matching in Carbon Capture and Storage Systems, 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012) in conjunction with the 26th Symposium of Malaysian Chemical Engineers (SOMChE 2012), Sabah.

85. S. H. Lee, Ng, R. T. L. Ng, D. K. S., Foo, D. C. Y. and Chew, I. M. L., and (2013). Optimization of a Gasification-based Integrated Biorefinery for Pulp and Paper Industry. Process System Engineering (PSE Asia 2013), Kuala Lumpur.

86. Diamante, J. A., Tan, R. R., Foo, D. C. Y., Ng, D. K. S., Aviso, K. B., Bandyopadhyay, S. (2013). Unified Graphical Pinch Approach for Targeting of Carbon Capture and Sequestration (CCS) Systems over Multiple Time Periods. Process System Engineering (PSE Asia 2013), Kuala Lumpur.

87. Ooi, R. E. H., Foo, D. C. Y., Ng, D. K. S., Tan, R. R., Smith, R. (2013). Carbon Constrained Energy Planning (CCEP) with Consideration of Energy Security. Process System Engineering (PSE Asia 2013), Kuala Lumpur.

88. Tan, Y. L., El-Halwagi, M. M., Samyudia, Y. Ng, D. K. S., Foo, D. C. Y., (2013). Heat Integrated Resource Conservation Networks without Mixing Prior to Heat Exchanger Networks. Process System Engineering (PSE Asia 2013), Kuala Lumpur.

89. J. S. W. Loo, R. T. L. Ng, D. K. S. Ng, J. K. Kim, Foo, D. C. Y., R. R. Tan, (2013). Targeting for Cogeneration System and Steam Distribution Network. 9th World Congress of Chemical Engineering (WCCE) incorporating 15th Asia Pacific Confederation of Chemical Engineers (APCChE 2013), Seoul, Korea.

90. Majozi, T., Foo, D. C. Y., Ng, D. K. S., Lam, H. L., and Tan, R. R. (2013). Optimization of Heat and Water Use in Multipurpose Batch Plants, International Conference on Applied Energy (ICAE2013), Pretoria, South Africa.

91. Lam, H. L., Chong, F. K., Lawrence, K. K., Lim, P. P., Poon, M. C. Y. Foo, D. C. Y. (2013). Carbon Capture Storage Planning and Management. Sustainable Development Conference 2013, Bangkok.

92. Tapia, J. F. D., Tan, R. R. Ooi, R. E. H., and Foo, D. C. Y. (2013) Optimum Allocation of CO2 for Geological Sequestration and Enhanced Oil Recovery Operations. 6th AUN/SEED-Net Regional Conference on Chemical Engineering (6thRCCE), Manila.

14

National Conferences

93. Foo, D. C. Y., Lee, L. E. and Manan, Z. A., (2000). Application of Extractive Distillation for the Separation of Benzene and Cyclohexane Mixture, paper presented in 14th Symposium of Malaysian Chemical Engineers (SOMChE 2000), Bangi, Selangor.

94. Hishamuddin, E., Foo, D. C. Y., Yunus, R. M., Lim, L. P. and Ripin, A., (2001) Decolourization of recovered Base Oil from Used Lubricant Oil: A Study of Composite Adsorbent, paper presented in 15th Symposium of Malaysian Chemical Engineers (SOMChE 2001), Johor Bahru.

95. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2002). Synthesis of Mass Exchange Network for Batch Process Systems: Calculation of Utility Targets, paper presented in National Science Fellowship (NSF) Annual Workshop 2002, Kuala Lumpur (Silver Award for Best Presenter).

96. Foo, D. C. Y. (2003). A New Targeting Tool in Water Pinch Technology – The Water Cascade Table, paper presented in SHELL Student Paper Presentation Contest (SSPEC 2003), UTM.

97. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2003). Maximising Water Recovery through Water Pinch Technology – The Use of Water Cascade Table, paper presented in Environment 2003, Batu Feringghi, Penang.

98. Foo, D. C. Y., Manan, Z. A., Yunus, R. M. and Aziz, R. A., (2003). A Review on the State-of-the-art of Water Minimisation Techniques Based on Pinch Technology, paper presented in Environment 2003, Batu Feringghi, Penang.

99. Manan, Z. A. and Foo, D. C. Y., (2003). Assessing Options for Process Changes via Water Cascade Analysis, paper presented in 17th Symposium of Malaysian Chemical Engineers (SOMChE 2003), Pulau Pinang.

100. Awang, M. R., Mutaat, H. H., Kumeresan, S., Foo, D. C. Y., Aziz, R. A., (2004). Economic Assessment of Sterifeed Process, paper presented in R&D Seminar, Malaysian Institute for Nuclear Technology Research (MINT).

101. Tan, J., Foo, D. C. Y., Kumaresan, S., Aziz, R. A., (2004). Modelling, Optimisation and Debottlenecking of a Pharmaceutical Production Process Utilising a Batch Process Simulator, paper presented in The Malaysian Society for Molecular Biology and Biotechnology Scientific Meeting (MSMBB 2004), Melaka.

102. Athimulam, A., Kumaresan, S., Foo, D. C. Y., Sarmidi, M. R., (2004). Modelling and Optimisation of Tongkat Ali Water Extract Production Utilising a Batch Process Simulator, paper presented in The Malaysian Society for Molecular Biology and Biotechnology Scientific Meeting (MSMBB 2004), Melaka.

103. Foo, D. C. Y., Kazantzi, V., El-Halwagi, M. M. and Manan, Z. A., (2004). Graphical Targeting Technique for Property-based Material Reuse Networks, paper presented in 18th Symposium of Malaysian Chemical Engineers (SOMChE 2004), Universiti Teknologi Petronas, Tronoh, Perak.

104. Tan, R. R., Foo, D. C. Y. and Manan, Z. A. (2004). Assessing the Sensitivity of Water Reuse Networks to Noisy Mass Loads Using Monte Carlo Simulation, paper presented in 18th Symposium of Malaysian Chemical Engineers (SOMChE 2004), Universiti Teknologi Petronas, Tronoh, Perak.

105. Chew, Y. H., Foo, D. C. Y. and Lee, C. T. (2005). Evaluating Heat Integration Scheme for Batch Production of Oleic Acid, paper presented in Malaysian Science and Technology Congress (MSTC 2005), Kuala Lumpur.

106. Foo, D. C. Y., Manan, Z. A., Selvan, M. and McGuire, M. L. (2005). Flowsheet Synthesis by Process Synthesis and Simulation Tools, paper presented in Malaysian Science and Technology Congress (MSTC 2005), Kuala Lumpur.

107. Foo, D. C. Y. (2006). Flowrate Targeting for Multiple Fresh Water Sources using Water Cascade Analysis, paper presented in the 20th Symposium of Malaysian Chemical Engineers (SOMChE 2006), Kuala Lumpur.

108. Tan, Y. L., Foo, D. C. Y. and Tan, R. R. (2006). Minimum Flowrates Targeting for Multiple Contaminants Water Network, paper presented in the 20th Symposium of Malaysian Chemical Engineers (SOMChE 2006), Kuala Lumpur.

109. Leong, Y. J., Lee, S. C., Low, K. W., Foo, D. C. Y. and R. R. Tan (2007). Process Integration for Non-Conventional Areas: Supply Chain Management and Carbon-Constrained Energy Planning, paper presented in Malaysian Science and Technology Congress (MSTC 2007), Subang.

110. Pau, C. H., Tan, Y. L., Ng, D. K. S. and Foo, D. C. Y. (2007). Property Integration Networks With Regeneration Placement, paper presented in Curtin University of Technology Sarawak Engineering Conference (CUTSE 2007), Sarawak.

111. Yong, E. L. Z., Tan, Y. L., Chew, I. M. L., Foo, D. C. Y. and Ng, D.K.S. (2007). A Graphical approach for simultaneous energy and water minimization, paper presented in Curtin University of Technology Sarawak Engineering Conference (CUTSE 2007), Sarawak.

15

112. Foo, D. C. Y., Ooi, M. B. L., Tan, R. R. and Tan, J. S. (2007). Optimum Production Planning in Supply Chain by Pinch Analysis Technique, paper presented in the 21st Symposium of Malaysian Chemical Engineers (SOMChE 2007), Kuala Lumpur.

113. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2007). Waste Treatment Targeting for Water Network, paper presented in the 21st Symposium of Malaysian Chemical Engineers (SOMChE 2007), Kuala Lumpur.

114. Chew, I. M. L., Ng, D. K. S. and Foo, D. C. Y. (2007). Flowrate Targeting for Plant-Wide Water Integration, paper presented in the 21st Symposium of Malaysian Chemical Engineers (SOMChE 2007), Kuala Lumpur.

115. Chew, I. M. L., Ng, D. K. S. Foo, D. C. Y. and Subramaniam, M. (2007). Simultaneous Reduction of Energy and Water – A Special Case on Chilled Water Network Synthesis, paper presented in the 1st Engineering Conference: Energy & Environment (EnCon07), Sarawak.

116. Ng, D. K. S., Lee, S. C., Foo, D. C. Y. and Tan, R. R. (2007). Carbon Constrained Energy Planning with Pinch Analysis, paper presented in the 1st Engineering Conference: Energy & Environment (EnCon07), Sarawak.

117. Foo, D. C. Y. (2009). How much do Malaysian Students Know About Chemical Engineering Before Enrolling? Postgraduate Certificate Higher Education (PGCHE) conference, 17-20 Aug 2009, University of Nottingham Malaysia (reported in The Chemical Engineer, May 2010 issue, pp 56).

118. Ng, D. K. S., Foo, D. C. Y. and Tan, R. R. (2010). Automated Targeting for Total Water Network with Fixed Removal Ratio Type Treatment System. The 1st IWA Malaysia Young Water Professionals Conference, Kuala Lumpur.

Patent filed Method for Obtaining Base Oil from Spent Lubricant (Malaysian Patent Registration Number PI 20022454)

Research grant 1. New Researchers’ Fund

Topic : Waste Minimisation for the Process Industry (NRF3822) Duration : May 2006 – April 2009 Awarding body : University of Nottingham UK Total amount : RM 136,500 (£21,048)

2. Science Fund

Topic : Development of Property Integration Techniques for Waste Minimisation (03-02-12-SF0018)

Duration : September 2007 – August 2009 Awarding body : Ministry of Science, Technology and Innovation, Malaysia (MOSTI) Total amount : RM 190,000

3. Long Term Research Grant Scheme (LRGS)

Topic : Recovery of Mesocarp Oil from Palm Pressed Fibres and Reuse of Extracted Mesocarp Fibres: Green Extraction Processes and Fibres Size Reduction Processes to Improve OER (Title for Research Program: Enhancing Productivity And Sustainability Of Palm Oil Milling Industry)

Duration : June 2012 – May 2017 Awarding body : Ministry of Higher Education, Malaysia (MOHE) Total amount : RM 12.446 Million

Research collaborators i. Prof Raymond Tan, De La Salle University-Manila, Philippines ii. Prof Mahmoud M. El-Halwagi, Texas A&M University, US iii. Prof Ramlan Abdul Aziz, Universiti Teknologi Malaysia, Malaysia iv. Prof Feng Xiao, Xi’an Jiaotong University /China University of Petroleum-Beijing, China v. Prof Thokozani Majozi, University of Pretoria, South Africa vi. Prof Santanu Bandyopadhyay, India Institute of Technology, India vii. Prof Jiří Klemeš, University of Pannonia, Hungary viii. Prof Robin Smith, University of Manchester, UK ix. Prof Cheng-Liang Chen, National Taiwan University, Taiwan

16

x. Prof Jacek M. Jeżowski, Rzeszow University of Technology, Poland xi. Prof Paul Stuart, École Polytechnique, Montreal, Canada xii. Dr Denny Ng, UNMC xiii. Dr Kathleen B. Aviso, De La Salle University-Manila, Philippines xiv. Dr Sivakumar Kumaresan, Universiti Malaysia Sabah, Malaysia xv. Dr Irene M. L. Chew, Monash University Sunway Campus, Malaysia xvi. Dr Chun Deng, China University of Petroleum-Beijing xvii. Dr Alberto Alva-Argaez, CANMET, Canada xviii. Dr Abeer Shoaib, Suez-Canal University, Egypt xix. Dr Vasiliki Kazantzi, Technological Educational Institute of Larissa, Greece xx. Dr Petar Varbanov, University of Pannonia, Hungary xxi. Dr Nick Hallale, Shell UK xxii. Dr Mimi Haryani Hashim, Universiti Teknologi Malaysia, Malaysia xxiii. Dr ChangKyoo Yoo, KyungHee University, Korea xxiv. Dr Chung Lim Law, UNMC xxv. Dr Hon Loong Lam, UNMC xxvi. Dr Denny K. S. Ng, UNMC xxvii. Dr Chew Tin Lee, Universiti Teknologi Malaysia, Malaysia xxviii. Dr Hul Seingheng, Institut de Technologie du Cambodge, Cambodia xxix. Dr Alexandros Koulouris, Technological Educational Institute of Thessaloniki, Greece xxx. Dr Grzegorz Poplewski, Rzeszow University of Technology, Poland xxxi. Mustafa Kamal, Universiti Teknologi Malaysia, Malaysia xxxii. Jully Tan, UCSI University, Malaysia xxxiii. Mike Boon Lee Ooi, NGLTech, Malaysia xxxiv. Chiang Choon Lai, UNMC xxxv. Yin Ling Tan, Curtin University of Technology Sarawak Campus, Malaysia xxxvi. Cheng Seong Khor, Universiti Teknologi Petronas, Malaysia xxxvii. Sophanna Nun, National Cleaner Production Office, Cambodia

Research attachment hosting for international students Name: SeingHeng HUL Advisor: Prof Raymond Tan Institution: De La Salle University-Manila, Phillipines Period: 7 – 18 August 2006 Name: Edward YONG and Choon Hock PAU Advisor: Yin Ling Tan Institution: Curtin University of Technology Sarawak Campus, Malaysia Period: 16-20 July 2007 Name: Chun DENG and Tianhua WANG Advisor: Prof Xiao Feng Institution: Xi’an Jiaotong University Period: 22 October – 22 November 2007 Name: Jui-Yuan LEE Advisor: Prof Cheng-Liang Chen Institution: National Taiwan University Period: 1 – 10 April 2008 Name: Gopal Chandra SAHU Advisor: Prof Santanu Bandyopadhyay Institution: Indian Institute of Technology, Bombay, India Period: 20 July – 25 August 2010 Name: Sophanna NUN Advisor: Prof Raymond Tan Institution: De La Salle University-Manila, Phillipines

17

Period: 30 July – 6 August 2010 Name: Zengkun WEN and Wei LI Advisor: Dr Chun Deng and Prof Xiao Feng Institution: China University of Petroleum-Beijing Period: 20 June – 20 July 2013

Postgraduate Student Supervision 1. Denny Kok Sum NG (PhD)

Topic : Synthesis of Resource Conservation Network with Interception Placement Duration : June 2006 – June 2008 Co-supervisor : Prof. Michael Cloke Co-researchers : Prof. Dr Raymond Tan, DLSU-Manila

2. Irene Mei Leng Chew (PhD) Topic : Synthesis of Inter-Plant Resource Conservation Network Duration : February 2007 – September 2009 Co-supervisor : Prof. Michael Cloke Co-researchers : Prof. Dr Raymond Tan, DLSU-Manila

3. Mahendran Subramaniam (MSc, CEPP-IPPMS) Topic : Synthesis of Chilled Water Network Duration : November 2006 – May 2007 Co-supervisor : Prof. Ramlan Abdul Aziz

4. Abeer Mahmoud Shoaib Mohamed (PhD) - Suez Canal University, Egypt Topic : A Systematic Approach for Synthesis of Mass Exchange Network Duration : October 2006 – June 2008 Co-supervisor : Assoc. Prof. Dr. Said Mohamed Abdalla (Suez Canal University); Assoc. Prof. Dr.

Moustafa El-Sayed Awad (Suez Canal University); Prof. Dr. Mahmoud M. El-Halwagi (Texas A&M University, US)

5. Omar H. Sulhi (MSc)

Topic : Process Modeling and Optimization for Cocoa Production Duration : June 2008 – September 2008 Co-supervisor : Assoc. Prof. Dr. Chung Lim Law

6. Noor Zuraihan Mohamad Noor (MSc, CEPP-IPPMS)

Topic : The Use of Computer Simulation Tools for Modelling of Biopharmaceutical Production at Innobio

Duration : January – May 2009 Co-supervisor : Prof. Ramlan Abdul Aziz

7. Victor Francis Obialor Onyedim (MSc)

Topic : Water Minimisation for an Acid Production Plant Duration : March 2009 – September 2009 Co-supervisor : Prof. Dr Raymond Tan, DLSU-Manila

8. Wendy Tjan (MSc)

Topic : A Graphical Representation of Carbon Footprint Reduction for Chemical Processes Duration : March 2009 – September 2009 Co-supervisor : Prof. Dr Raymond Tan, DLSU-Manila

9. Raymond Eam Hooi Ooi (PhD)

Topic : Carbon-constrained energy planning with optimum placement of carbon capture and storage

Duration : February 2010 - present Co-supervisor : Dr Denny Ng; Prof. Dr Raymond Tan, DLSU-Manila

18

10. S. Sadish Kumar (MSc, CEPP-IPPMS)

Topic : Project on Energy Conservation and Carbon Dioxide Emission Reduction Duration : July 2010 – May 2011 Co-supervisor : Prof. Ramlan Abdul Aziz

11. Yin Ling Tan (PhD, Curtin University of Technology Sarawak Campus)

Topic : Optimisation of Reuse/Recycle Networks Using Energy, Mass and Property Integration

Duration : February 2007 - present Co-supervisor : Prof. Dr Yudi Samyudia, Prof. Mahmoud El-Halwagi

12. Joseph S. H. Lim (EngD, IBD UTM) Topic : Building a world class herbaceutical company via operational excellence in supply

chain management Duration : July 2010 – present Co-supervisor : Prof. Ramlan Abdul Aziz

13. Walaa Mahmoud Shehata Soliman (Suez University, Egypt) Topic : Process Design and Synthesis of Hydrogen Networks Duration : 2010 – 2013 Co-supervisor : Prof. Dr. Fatma Khalefa Gad, Dr. Abeer Mahmoud Shoaib, Dr. Jin-Kuk Kim

Postgraduate thesis examination 1. Anand Moodley (MSc)

Topic : Development of a unified mass and heat integration framework for sustainable design: An automated approach

Date : 27 July 2007 University : University of Pretoria, South Africa

2. Petrica Iancu (PhD)

Topic : Process Integration for Water Minimisation in Oil Processing and Petrochemistry Date : November 2007 University : University POLITEHNICA of Bucharest, Romania

3. Abeer Mahmoud Shoaib Mohamed (PhD)

Topic : A Systematic Approach for Synthesis of Mass Exchange Network Date : 4 June 2008 University : Suez Canal University, Egypt

4. Ciou Ying-Jyuan (PhD)

Topic : A Mathematical Programming Approach for Synthesis and Design of Mass/Heat Exchanger Networks in Batch Plants

Date : 16 July 2008 University : National Taiwan University, Taiwan

5. Jacques Francois Gouws (PhD)

Topic : Development of a Complete Process Integration Framework for Wastewater Minimisation in Batch Processes

Date : 28 November 2008 University : University of Pretoria, South Africa

6. Chien Hwa Chong (PhD)

Topic : Improving Product Quality of Dehydrated Fruit Using Hybrid Drying Technique Date : 7 June 2010 University : University of Nottingham (internal examiner)

7. Jui-Yuan Lee (PhD)

19

Topic : Synthesis of Resource Conservation Network for Batch and Continuous Processes Date : 18 Jan 2011 University : National Taiwan University, Taipei

8. Donald Robert Nonyane (MEng)

Topic : Long Term Scheduling Technique for Wastewater Minimization in Multipurpose Batch Processes

Date : 1 July 2011 University : University of Pretoria, South Africa

9. Gololo KV (PhD)

Topic : Analysis, Synthesis and dOptimization of Complex Cooling Water Systems Date : July 2013 University : University of Pretoria, South Africa

International Scientific Committee 1. Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution

Reduction (2006 - present). 2. European Symposium of Computer-Aided Process Engineering (ESCAPE-19), Poland. 3. Gas Processing Symposium, Qatar (2009, 2010, 2012) 4. Foundation of Computer-Aided Process Design (FOCAPD 2009), Colorado, US. 5. Advances in Energy Research (ICAER 2009, 2011, 2013), India. 6. Process System Engineering (PSE’09), Brazil (special reviewer). 7. CUTSE International Conference, Sarawak (2009). 8. 11th International Symposium on Process Systems Engineering (PSE 2012), Singapore. 9. The 6th International Symposium on Design, Operation and Control of Chemical Processes (PSE Asia

2013), Kuala Lumpur. 10. 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah 11. International Conference on Food and Biosystems Engineering (FaBE2013), Greece 12. 12th International Symposium on Process Systems Engineering (PSE 2012), European Symposium of

Computer-Aided Process Engineering (ESCAPE-25), Copenhagen, Denmark.

Editorial Board Member for Publication 1. Process Safety & Environmental Protection (Transactions of IChemE Part B) 2. Clean Technology and Environmental Policy 3. Chemical Engineering Transactions - http://www.aidic.it/italiano/pubblicazioni/transactions.html 4. IEM Journal

Evaluator for international institutions 1. National Research Foundation (NSF), South Africa (research projects, researchers’ performance) 2. Qatar National Research Fund (QNRF), Qatar (research projects)

Reviewer for Journals 1. ASEAN Journal of Chemical Engineering 2. Asia-Pacific Journal of Chemical Engineering 3. Applied Energy 4. Applied Thermal Engineering 5. Chemical Engineering Communications 6. Chemical Engineering Journal 7. Chemical Engineering Science 8. Clean Technologies and Environmental Policy 9. Computers and Chemical Engineering 10. ENERGY 11. Environmental Modelling and Softwares 12. Environmental Engineering and Management Journal 13. IEM Journal 14. Industrial & Engineering Chemistry Research 15. Journal of Cleaner Production 16. Journal of Environmental Management

20

17. Jurnal Kejuruteraan Kimia Malaysia 18. Jurnal Teknologi UTM 19. Trans IChemE, Part A – Chemical Engineering Research and Design 20. Trans IChemE, Part B – Process Safety and Environmental Protection 21. Pertanika Journal of Science & Technology 22. Pharmaceutical Engineering

University administrative duties 1. University level:

a. Postgraduate and Research Strategy Committees (2010 – 2011) b. Centre of Excellence for Green Technologies - Director (2006 – present)

i. Professional workshops organised: • Fundamentals of Chemical Safety & Health (19 - 20 April 2012, Royale Chulan) • Green Technologies Professional Course (14 & 15 December 2012, Genting) • 2-Day Professional Workshop on Bioenergy (7 & 8 May 2012, Royale Chulan)

ii. In-house training for companies: • Lembaga Getah Malaysia (17-18 April 2012) • ExxonMobil Exploration & Production Malaysia (13, 14, 20, 21, 27, 28 Dec 2012 ;

3, 4, 10, 11, 17, 18 Jan 2013) iii. Conferences organised:

• Postgraduate Colloquium on Environmental Research (POCER2011), 15-16 July 2011, UNMC

• International Summer Conference on Business Innovation & Technology Management (APBITM 2012), July 01-03, 2012, Genting Highland (local host)

• Postgraduate Colloquium on Environmental Research (POCER2013), 28—29 June 2013, Genting Highland

• 18th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015), Kuching

2. Faculty level: a. Faculty Research Committee

i. Responsibilities: attend monthly Research Committee Meeting, research prospectus for Faculty of Engineering, Admission Tutor for postgraduate research students

ii. Faculty Postgraduate Committee b. Head of ENVIRONMENT Research Division

i. Activities organised: Research Away Day (15 July 10, Oriental Crystal Hotel, Kajang); Postgraduate Colloquium (2011), Research Away Day 2011 (23 Sept 11, Mines Wellness Hotel Seri Kembangan), Research Away Day 2012 (7 Aug 12, Hotel Equatorial Bangi)

ii. Responsibilities: organise research groups, attend monthly Research Committee Meeting, research prospectus for Faculty of Engineering, organise research seminars

iii. Admission tutor for postgraduate research students (2010-present) iv. Head of Sustainable Process Integration (SPI) Research Group (2006-2012).

3. Department of Chemical and Environmental Engineering: a. Administrative on staff candidates interview b. Undergraduate course review committee c. Organise research/industrial talks and seminars d. Advisor for Chemical Engineering Students’ Society e. Coordinator for MEng/BEng design projects f. Admission tutor for postgraduate research students g. Industrial advisory board h. Tri-campus Departmental Teaching and Learning Committee (Sept 2010 – June 2013)

Talk / Seminar Organised 1. Luncheon Talk “Application of Mass Exchange Network Synthesis”

Speaker : Assoc. Prof. Dr. Duncan Fraser (University of Cape Town, South Africa) Date : 31 January 2001 Venue : CEPP, UTM

2. Three Day Hands-on Course on “Energy and Waste Reductions in the Process Industries: A Pinch

Technology Approach”

21

Course tutors : Assoc. Prof. Dr. Duncan Fraser (University of Cape Town, South Africa) Dr Zainuddin Abdul Manan (UTM)

Date : 29 – 31 January 2002 Venue : BATC UTM KL 3. Two Day Hands-on Course on “Batch Process Modeling and Optimisation”

Course tutor : Dr Alexandros Koulouris (Intelligen, Inc., Greece) Date : 10 – 11 March 2003 Venue : BATC UTM KL

4. Public Talk “Global Biotech Business and Investment Today”

Speaker : Dr Mou Duen Gang (Professor, Malaysian University of Science & Technology) Date : 7 October 2003 Venue : CEPP, UTM

5. SuperPro Designer User Conference

Speakers : Dr Alexandros Koulouris (Intelligen, Inc., Greece); Dr Mat Rasol Awang (MINT), Sivakumar Kumaresan (CEPP, UTM), Dr Lee Chew Tin (FKKKSA, UTM)

Date : 27 April 2005 Venue : UTM KL 6. Career Guidelines Training

Speakers : Karl Kolmetz (KLM Technology Group) Date : 2 December 2005 Venue : UNMC

7. A Two Day Workshop on Process Integration: Systematic Tools and Industrial Applications

Speaker : Prof Mahmoud El-Halwagi, Texas A&M university, US Date : 19 – 20 June 2006 Venue : Kuala Lumpur Convention Centre

8. Professional Excellence

Speaker : Dr Alan Rossiter (Rossiter and Associates, US) Date : 24 March 2006 Venue : UNMC

9. Energy Management via Process Integration

Speaker : Dr Alan Rossiter (Rossiter and Associates, US) Date : 24 March 2006 Venue : UNMC

10. Conference on Best Practises in Process Plant Management

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 21 – 22 June 2006 Venue : Kuala Lumpur Convention Centre

11. Herbal Product Development from Seed to Shelf

Speaker : Prof Ramlan Abdul Aziz (CEPP, UTM) Date : 10 April 2006 Venue : UNMC

12. Synthesis Of Optimal Topologically-Constrained Water Reuse Network Using Swarm Intelligence

Speaker : Mr Hul Seingheng (De La Salle University-Manila, Philippines) Date : 14 August 2006 Venue : UNMC

13. Career of A Chemical Engineer

Speaker : Mr Chan Tuck Leong (Petronas) Date : 18 November 2006 Venue : UNMC

14. Recent Developments in Process Integration

Speaker : Prof Robin Smith (University of Manchester, UK) Date : 8 December 2006 Venue : UNMC

15. Life Cycle Assessment

Speaker : Dr Raymond R. Tan (De La Salle University-Manila, Philippines) Date : 27 March 2007 Venue : UNMC

16. Theory and Extensions of Source/Sink Pinch Diagrams

Speaker : Dr Raymond R. Tan (De La Salle University-Manila, Philippines)

22

Date : 30 March 2007 Venue : UNMC 17. Career as a Process Engineer at Paper Mill

Speaker : Arunasalam Athimulam (Malaysian Newsprint Industry) Date : April 2007 Venue : UNMC

18. Conceptual Approach for Targeting Water System with Regeneration Recycle

Speaker : Chun Deng (Xi’an Jiaotong University, China) Date : 12 November 2007 Venue : UNMC

19. Malaysia Energy Outlook

Speaker : Phubalan Karunakaran (Pusat Tenaga Malaysia) Date : 17 October 2008 Venue : UNMC

20. Shell Malaysia Career and Technical Talk

Speaker : Debbie Chan (Shell Human Resource) and Paul Siew (Shell Global Solution) Date : 20 November 2008 Venue : UNMC

21. Chemical Engineering – Implementation in Semiconductor Industry

Speaker : Mahendran Subramaniam (formally Silttera-Chemicals; Intel) Date : 2 March 2009 Venue : UNMC

22. Introduction to Computational Fluid Dynamic

Speaker : Dr Julius Gimbun (Universiti Malaysia Pahang) Date : 13 July 2009 Venue : UNMC

23. Career of a Chemical Engineer in a Pharmaceutical Company

Speaker : Zuraihan (NNE Pharma) Date : 9 November 2009 Venue : UNMC

24. The Change Journey

Speaker : M Akbal Shafawi (MTBE Petronas). Date : 23 November 2009 Venue : UNMC

25. My Career as a Chemical Engineer

Speaker : Kuan Choon Keat (MTBE Petronas). Date : 25 February 2010 Venue : UNMC

26. Particle Engineering: Role of Surface Properties

Speaker : Dr Jerry Y. Y. Heng (Imperial College London, UK) Date : 14 June 2010 Venue : UNMC

27. Advanced Process Integration Lecture Series (ENVIRONMENT Research Division)

• Synthesis of heat integrated water network with negligible contaminant effect • Automated targeting technique for batch water network • Synthesis of regional energy supply chain based on palm oil biomass

Speakers : Gopal Chandra Sahu (Indian Institute of Technology, Bombay); Sophanna Nun (Institute of Technology of Cambodia, Cambodia); Assoc Prof Mustafa Kamal (Universiti Teknologi Malaysia).

Date : 3 Aug 2010 Venue : UNMC 28. Role of a Chemical Engineer in Oil and Gas Platform Design

Speaker : Ir Raymond Ooi Eam Hooi (Ranhill WorleyParsons) Date : 1 Nov 2010 Venue : UNMC

29. What is installed for you in a Chemical Engineering Programme-Academic vs. Reality?

Speaker : Alan Ko Shian Lyn (Innovative Process Solution) Date : 3 Dec 2010 Venue : UNMC

23

30. The Power of Mathematics in Process Integration (ENVIRONMENT Research Division) Speaker : Professor Thoko Majozi (University of Pannonia, South Africa) Date : 20 Dec 2010 Venue : UNMC

31. Pump Selection and Design

Speaker : Ir Shyam Lakshmanan (Malay-Sino Chemical Industry) Date : 8 March 2011 Venue : UNMC

32. How to design a good distillation column

Speaker : Melwynn Leong (Sulzer Chemtech, Singapore) Date : 9 March 2011 Venue : UNMC

33. Industrial talk

Speaker : Tan Yee Voon (Chemical Mate) Date : 12 Oct 2011 Venue : UNMC

34. Overview of oleochemical industry

Speaker : Assoc Prof Mustafa Kamal (CLEAR, UTM) Date : 25 Oct 2011 Venue : UNMC

35. New Challenges and Opportunities of PSE from Experiences of Environmental Systems

Engineering (ESE) Speaker : Assoc Prof ChangKyoo Yoo (Kyung Hee University, Korea) Date : 11 Jan 2012 Venue : UNMC

36. Professional Excellence and Ethics

Speaker : Dr Alan Rossiter Date : 16 Feb 2012 Venue : UNMC

37. Caution - Fresh Graduates in Work!

Speaker : Nik Khairul Izzat Date : 4 Apr 2012 Venue : UNMC

38. High Level Seminar (co-host with MYEULINK)

o Integration of Energy and Resource Flows for World Sustainability; an EU perspective o Workshop on EU Research Proposal Write-up and Submission Speaker : Prof Jiří Jaromír Klemeš Date : 10 July 2012 Venue : UNMC KL Teaching Centre

39. Overview of Oil & Gas Industry

Speaker : Ir Mohd Anwar Ahmad Date : 8 Oct 2012 Venue : UNMC

40. Life Mass Balance

Speaker : Rosmi Zamzuri Date : 12 March 2013 Venue : UNMC

Professional Courses Taught 1. Workshop on Computer Aided Process Simulation by Design II for Windows

Organiser : Process System Engineering Group, Chem Eng Dept., UTM Date : 24 – 25 August 2000 Venue : Process Design Lab, Chem Eng Dept. Participants : Lecturers & researchers from FKKKSA, UTM

2. Workshop on Computer Aided Process Simulation by Design II for Windows

Organiser : Process System Engineering Group, Chem Eng Dept., UTM Date : 16 – 17 May 2001 Venue : Process Design Lab, Chem Eng Dept. Participants : Lecturers & researchers from FKKKSA, UTM

24

3. Hands-on Introduction to Process Simulation Modelling for Continuous and Batch Processes

Organiser : Process System Engineering Group, Chem Eng Dept., UTM Date : 12 – 13 May 2003 Venue : Process Design Lab, Chem Eng Dept. Participants : Lecturers & researchers from FKKKSA, UTM

4. A Two-day Hands-on Course on Batch Process Modelling and Optimisation Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 27 – 28 May 2003 Venue : Computer Room, CEPP UTM Participants : Industrial participants, researchers and lecturers from academic institution

5. A Two-day Hands-on Course on Batch Process Modelling and Optimisation

Organiser : ACHEMA Pte Ltd, Singapore Date : 3 & 5 September 2003 Venue : School of Chemical and Life Sciences, Singapore Polytechnic Participants : Lecturers & researchers from Singapore Polytechnic, Singapore

6. A Two-day Hands-on Course on Batch Process Modelling and Optimisation

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 31 March & 1 April 2004 Venue : UTM City Campus, KL Participants : Industrial participants, researchers and lecturers from academic institutions

7. Hands-on Introduction to Process Simulation Modelling for Continuous and Batch Processes

Organiser : Process Synthesis and Design Group, Chem Eng Dept., UTM Date : 23 – 24 June 2004 Venue : Process Design Lab, Chem Eng Dept. Participants : Lecturers & researchers from FKKKSA, UTM

8. A Four Day Course on Wastewater Treatment Plant Operation and Troubleshooting

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 2 – 5 August 2004 Venue : UTM City Campus, KL Participants : Industrial participants, researchers and lecturers from academic institutions

9. A Three and a Half Day Course on Maximising Energy and Water Savings in Process Industry

Using Pinch Analysis Organiser : Process Synthesis and Design Group, Chem Eng Dept., UTM Date : 10 – 13 August 2004 Venue : UTM City Campus, KL Participants : Industrial participants

10. A Four Day Course on Wastewater Treatment Plant Operation and Troubleshooting

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 4 – 7 October 2004 Venue : EMSB/PEMSB Training Centre, Kerteh Participants : Industrial participants

11. A Four Day Course on Wastewater Treatment Plant Operation and Troubleshooting

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 17 – 20 January 2005 Venue : UTM City Campus, KL Participants : Industrial participants, researchers and lecturers from academic institutions

12. Maximising Energy and Water Savings in Process Industry Using Pinch Analysis

Organiser : De La Salle University, Manila (workshop for HNICEM 2005) Date : 24 March 2005 Venue : De La Salle University, Manila Participants : Industrial participants, researchers and lecturers from academic institutions

13. A Two-day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 25 – 26 March 2005 Venue : UTM City Campus, KL Participants : Industrial participants, researchers and lecturers from research/academic institutions

25

14. A Four Day Course on Wastewater Treatment Plant Operation and Troubleshooting

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 4 – 7 July 2005 Venue : UTM City Campus, KL Participants : Industrial participants

15. Maximising Energy and Water Savings in Process Industry Using Pinch Analysis

Organiser : Process Synthesis and Design Group, Chem Eng Dept., UTM Date : 19 – 22 September 2005 Venue : UTM City Campus, KL Participants : Industrial participants, researchers and lecturers from academic institutions

16. Computer Aided Design for Wastewater Treatment Plant (in house training)

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 21 November 2005 Venue : National University of Malaysia (UKM) Participants : Researchers and lecturers from environmental, civil and chemical engineering

17. A Two-day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (in

house training) Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 15 – 16 September 2006 Venue : University Kuala Lumpur Participants : Researchers/lecturers

18. A Four Day Course on Wastewater Treatment Plant Operation and Troubleshooting

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 26 – 29 March 2007 Venue : UTM City Campus, KL Participants : Industrial participants

19. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (in

house training) Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 16 – 18 May 2007 Venue : National University of Malaysia (UKM) Participants : Researchers/lecturers from Chemical and Process Engineering Dept, UKM

20. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (in

house training) Organiser : ACHEMA Pte Ltd, Singapore Date : 12 – 14 February 2008 Venue : Nanyang Polytechnic Singapore Participants : Lecturers from Nanyang Polytechnic Singapore

21. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (in

house training) Organiser : ACHEMA Pte Ltd, Singapore Date : 18 – 20 June 2008 Venue : Singapore Polytechnic Participants : Lecturers from Singapore Polytechnic

22. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (in

house training) Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 1 – 3 July 2008 Venue : University Malaysia Perlis (UniMAP) Participants : Researchers/lecturers from School of Bioprocess Engineering, UniMAP

23. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation (in

house training) Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 25 – 27 June 2009 Venue : University Malaysia Pahang (UMP) Participants : Researchers/lecturers from Chemical Engineering Department, UMP

24. Production Planning with Process Integration (EngD programme)

Organiser : Chem Eng Pilot Plant (CEPP), UTM

26

Date : 29-30 August; 5-6, 12-13 September 2009

Venue : UTM City Campus, KL

Participants : Industrial participants, researchers and lecturers from academic institutions 25. Half-Day Workshop: How to Design Water Recovery Network for a Process Plant

Organiser : Chemical Engineering Technical Division, IEM Date : 3 October 2009 Venue : Wisma IEM Participants : Industrial participants

26. Water Pinch Analysis (Workshop for Regional Renewables and Waste to Energy Integration and

Sustainable System Implementation - http://cpi.uni-pannon.hu/index.php?section=25) Organiser : University of Pannonia, Veszprém, Hungary Date : 7 – 12 September 2009 Venue : University of Pannonia, Veszprém Participants : Postgraduate students from EU universities

27. Modelling and Optimisation of Batch Processes and Wastewater Treatment (EngD programme)

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 10-11, 17-18, 24-25 Oct 09 Venue : UTM City Campus, KL Participants : Industrial participants

28. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation

Organiser : Chem Eng Pilot Plant (CEPP), UTM; International Islamic University Malaysia (IIUM) Date : 1 – 3 June 2010 Venue : International Islamic University Malaysia Participants : Researchers/lecturers from academic institutions

29. Process Integration for Resource Conservation (workshop for PSE Asia 2010)

Organiser : National University Singapore Date : 25 July 2010 Venue : PSE Asia 2010, Singapore Participants : Industrial participants, researchers and lecturers from academic institutions

30. Waste Minimisation - How to Set Realistic Benchmark Targets

Organiser : Marcus Evans Date : 18-19 October 2010 Venue : Jakarta, Indonesia Participants : Industrial participants

31. Modelling and Optimisation of Batch Processes and Wastewater Treatment (EngD programme)

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 18-19, 25-26 Sept, 2-3 Oct 10 Venue : UTM City Campus, KL Participants : Industrial participants

32. Production Planning with Process Integration (EngD programme)

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 13-14, 20-21, 27-28 Nov 2010 Venue : UTM City Campus, KL Participants : Industrial participants

33. Wastewater Treatment and Recycling Workshop (in-house training)

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 29-30 Nov; 1-2 Dec 2010 Venue : Intel Technology, Penang Participants : Engineers from facility team, EHS personnel (Kulim and Penang plants)

34. Modelling and Optimisation of Batch Processes and Wastewater Treatment (EngD programme)

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 2-3, 9-10, 16-17 July 11 Venue : UTM City Campus, KL Participants : Industrial participants

35. Water, Hydrogen and Carbon Footprint Reduction Using Pinch Analysis

Organiser : Center for Environmental studies (Kyung Hee University, Korea) Date : 5 – 7 July 2011 Venue : Kyung Hee University, Korea Participants : Researchers and lecturers from academic institutions

27

36. Optimizing Water and Resources for Biofuels Production

Organiser : Research and Development Centre for Petroleum Processing (PVPro), Vietnam Petroleum Institute (VPI)

Date : 30 – 31 August 2011 Venue : PVPro, Hochiminh City Participants : Engineers from VPI

37. Production Planning with Process Integration (EngD programme)

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 10-11, 17-18, 24-25 Sept 2011 Venue : UTM City Campus, KL Participants : Industrial participants

38. Pinch Technology: Energy and Water Management

Organiser : Department of Energy Science and Engineering, Indian Institute of Technology Bombay, Mumbai, India (IIT-Bombay)

Date : 7 – 8 December 2011 Venue : IIT-Bombay Participants : Industrial participants

39. One Day Course on Process Integration for Waste Minimization and Production Carbon

Footprint Reduction Organiser : Chemical Engineering Technical Division, IEM Date : 19 December 2011 Venue : Wisma IEM Participants : Industrial participants

40. A 2½ Day Hands-on Course on Batch/Bioprocess Modelling Scheduling and Optimisation

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 22 – 24 February 2012 Venue : Universiti Teknologi MARA Participants : Researchers/lecturers from academic institutions

41. Production Planning with Process Integration (EngD programme)

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 28-29 April, 5-6, 12-13 May 2012 Venue : UTM City Campus, KL Participants : Industrial participants

42. Seven Keys for Successful International Researcher

Organiser : Persada RAY Date : 2 Oct 2012 Venue : Singgahsana Hotel Participants : University academics

43. Modelling and Optimisation of Batch Processes and Wastewater Treatment (EngD programme)

Organiser : Chem Eng Pilot Plant (CEPP), UTM Date : 13, 14, 20, 21, 27, 28 Oct 2012 Venue : UTM City Campus, KL Participants : Industrial participants

44. Resource Conservation using Pinch Analysis

Organiser : Universiti Malaysia Sabah Date : 20 Nov 2012 Venue : Universiti Malaysia Sabah Participants : Industrial participants and university academics

45. Seven Keys for Successful International Researcher

Organiser : U21 Early Career Researcher Date : 6 Dec 2012 Venue : Shanghai Jiaotong University Participants : University academics

46. Publication – Why and How

Organiser : Shanghai Jiaotong University Date : 6 Dec 2012 Venue : Shanghai Jiaotong University Participants : University academics

28

47. Multicomponent Separation

Organiser : Nottingham MyRIAD Solutions Date : 10 – 11 Jan 2013 Venue : ExxonMobil Exploration &

Production Malaysia Participants : Industrial participants

48. Two-day Hands-on Training on Water Pinch Analysis

Organiser : PETRONAS Group Health, Safety & Environment Division Date : 27 – 28 Feb 2013

6 – 7 March 2013 27 – 28 March 2013 15 – 16 April 2013

Venue : Royale Chulan KL Awana-Kijal Kerteh Impiana KLCC Hotel & Spa KL Convention Centre

Participants : PETRONAS employees from various OPUs 49. How to Write a Good Paper

Organiser : UNMC Graduate School Date : 14 March 2013 Venue : UNMC Participants : Postgraduate students

50. Half Day Workshop: Water Minimisation with Pinch Analysis

Organiser : Curtin University, Perth, Australia Date : 24 July 2013 Venue : Curtin University, Australia Participants : Industrial participants, university researchers

51. Water Minimization and Carbon Footprint Reduction with Process Integration

Organiser : IChemE Date : 29 – 30 July 2013 Venue : Singapore Participants : Industrial participants

52. Publication – Why and How; How to Write a Good Paper

Organiser : PSE Lab, China University of Petroleum, Beijing Date : 14 May 2013 Venue : China University of Petroleum Participants : Postgraduate students

Talks / Seminars Delivered 1. How to Establish Professional Networks

Programme : UNMC Graduate School Training Programme Date : 17 April 2009

2. How to Establish International Networks 3. Extended Pinch Analysis Tool for Non-conventional Areas

Programme : Talk for Faculty of Engineering, De La Salle University-Manila Date : 21 Nov 2007

4. Process Integration for Resource Conservation

Programme : Chemical Engineering Department, Universiti Teknologi PETRONAS Date : 29 April 2009

5. How to Establish Professional Networks

Programme : Talk for Chemical Engineering Department, University Malaysia Pahang Date : 26 June 2009

6. How to Maximise the Potential of Water Reuse/Recycle

Programme : Technical Talk - Institution of Engineers, Malaysia Date : 6 Aug 2009

7. Innovation in Chemical Engineering – or Pinch Me: a Creative Engineer!

Programme : IChemE Technical Meeting

29

Date : 17 March 2010 8. Benchmarking for Resource Conservation – A Process Integration Perspective

Programme : PETRONAS Waste Management Initiative Working Group Meeting Date : 10 June 2010

9. Carbon Footprint Reduction for Cleaner Production

Programme : Technical Talk - Institution of Engineers, Malaysia Date : 9 Oct 2010

10. Wastewater forum

Programme : Two Day Exhibition cum Forum and Technical Talks on Water and Industrialised Building System - Institution of Engineers, Malaysia

Date : 8 – 9 Dec 2010 11. How to Decide for a Future Career – Corporate Ladder vs. Postgraduate Study

Programme : Industrial Talk of Chemical Engineering - Universiti Malaysia Pahang Date : 9 Feb 2011

12. Postgraduate Study – BEng@18, MEng@23, PhD@25

Programme : Technical Talk - Institution of Engineers, Malaysia Date : 18 Feb 2012

13. Juggling Teaching, Research and Admin as a New Lecturer

Programme : Early Career Research Workshop Date : 2 May 2012

14. Process Integration Research in Carbon Capture and Storage

Programme : IChemE Oil & Natural Gas Special Interest Group evening meeting Date : 18 June 2012

15. Career Prospect in Engineering

Programme : IEM Engineering Week Date : 15 August 2012

16. Process Integration for CO2 reduction

Programme : Carbon Capture and Storage Horizons and Challenges Workshop, Gas Processing Center, Qatar

Date : 10 – 11 Oct 2012 17. Process Integration for Resource Conservation and Emission Reduction

Programme : PETRONAS Waste Management Initiative Working Group Meeting Date : 24 Oct 2012

18. Seven Keys for Successful International Researcher

Programme : Staff training series - Zhejiang University, China Date : 4 Dec 2012

19. Professional Networking for Academics and Researchers

Programme : Technical Talk - Institution of Engineers, Malaysia Date : 8 Jan 2013

20. How to Manage Professional Networking and Collaboration in Academia and Beyond

Programme : Keynote and Roundtable Discussion – Early Career Researcher Network UNMC Date : 13 March 2013

21. Productivity Enhancement and Resource Conservation with Process Integration Techniques

Programme : Seminar on Excellence in Manufacturing - Federation of Malaysian Manufacturers Date : 18 June 2013

30

22. Teaching of Chemical Process Design

Programme : IChemE Subject Interest Group Webinar Date : 21 June 2013

23. Carbon capture and storage

Programme : Research seminar @ University of University of the Witwatersrand, Johannesburg South Africa

Date : 13 September 2013 24. Waste Minimization for Sustainable Processes

Programme : Environmental Seminar series, School of Geography UNMC Date : 15 October 2013

25. Carbon Footprint Reduction through Electricity and Steam Saving – A Graphical Approach

Programme : Persidangan Tahunan Teknikal Untuk Jurutera Mekanikal dan Electrik Date : 24 October 2013

Undergraduate / Postgraduate Courses Taught / Facilitated 1. Computer Aided Process Simulation Project (SKC 4821)

Level : Chemical engineering undergraduate (year 4 – final year) Format : Lecture and workshop Duration : June – October 2004 Affiliation : Chemical Engineering Dept, UTM

2. Membrane Separation Technology (SKC 4363)

Level : Chemical engineering undergraduate (year 4 – final year) Format : Tutorial Duration : 2000 – 2003 Affiliation : Chemical Engineering Dept, UTM

3. Chemical and Biological Reaction Engineering (MBT 504)

Level : Biotechnology MSc program (MIT syllabus) Format : Lecture and workshop Duration : May – June 2003 Affiliation : Malaysia University of Science and Technology (MUST)

4. Process Engineering Fundamentals (PEF H81)

Level : Chemical engineering undergraduate (year 1) Format : Lecture Duration : Fall semester (September – December) – 2005, 2006 Affiliation : University of Nottingham Malaysia

5. Plant Design (PLD H82)

Level : Chemical engineering undergraduate (year 2) Format : Lecture Duration : Spring semester (February – May) 2006 – present Affiliation : University of Nottingham Malaysia

6. Chemical Product Design (H83CPD)

Level : Chemical engineering undergraduate (year 3) Format : Lecture Duration : Spring semester (February – May) 2006 – 2010 Affiliation : University of Nottingham Malaysia

7. Process Simulation 1 (H8CPS1) / Computer Flowsheeting (H8DCFL)

Level : Chemical engineering undergraduate (year 3) / MSc Format : Lecture/workshop

31

Duration : Fall semester (September – December) 2006 – present Affiliation : University of Nottingham Malaysia

8. Process Synthesis and Design (H84PSD)

Level : Chemical engineering undergraduate (year 4) / MSc Format : Lecture Duration : Fall semester (September – December) 2007 – present Affiliation : University of Nottingham Malaysia

9. Computer Systems (H82CYS)

Level : Chemical engineering undergraduate (year 2) Format : Lecture/workshop Duration : Fall semester (September – December) 2008 – 2011 Affiliation : University of Nottingham Malaysia

9. Process Design and Optimisation (H84PDO)

Level : Chemical engineering undergraduate (year 4) / MSc (optional) Format : Lecture/workshop Duration : Spring semester (February – May) 2011 – present Affiliation : University of Nottingham Malaysia

Course Monographs Prepared 1. Aziz, R. A. and Foo, D. C. Y., Global and Local Outlook of Chemical Process Industry, Course

Monograph on “Chemical Engineering for Non-Chemical Engineers (CENCE)”, Chemical Engineering Pilot Plant, UTM (2000).

2. Aziz, R. A. and Foo, D. C. Y., Membrane Separation Technology, Undergraduate Subject Monograph, Dept. of Chemical Engineering, UTM (2000).

3. Aziz, R. A. and Foo, D. C. Y., Global and Local Outlook of Chemical Process Industry, Module Monograph on ”Integrated Process Plant Management Scheme (IPPMS)”, Chemical Engineering Pilot Plant, UTM (2000).

4. Yunus, R. A., Manan, Z. A. and Foo, D. C. Y., Mass and Energy Balances, Course Monograph on “Chemical Engineering for Non-Chemical Engineers (CENCE)”, Chemical Engineering Pilot Plant, UTM (2000).

5. Aziz, R. A. and Foo, D. C. Y., Global and Local Outlook of Chemical Process Industry, Course Monograph on “Chemical Engineering for Non-Chemical Engineers (CENCE)”, Chemical Engineering Pilot Plant, UTM (2000).

6. Aziz, R. A. and Foo, D. C. Y., Membrane Separation Technology, Undergraduate Subject Monograph, Dept. of Chemical Engineering, UTM (2000).

7. Aziz, R. A. and Foo, D. C. Y., Global and Local Outlook of Chemical Process Industry, Module Monograph on ”Integrated Process Plant Management Scheme (IPPMS)”, Chemical Engineering Pilot Plant, UTM (2000).

8. Yunus, R. A., Manan, Z. A. and Foo, D. C. Y., Mass and Energy Balances, Course Monograph on “Chemical Engineering for Non-Chemical Engineers (CENCE)”, Chemical Engineering Pilot Plant, UTM (2000).

9. Aziz, R. A. and Foo, D. C. Y., Downstream Processing, Course Monograph on “Bioreactor Operation and Troubleshooting”, Chemical Engineering Pilot Plant, UTM (2000).

10. Manan, Z. A., Foo, D. C. Y., Lee, L. E., Ooi, B. L., Tan, E. F., Lim, F. Y. and Tee, S. T., Computer Aided Process Simulation by Design II for Windows, Workshop Monograph on “Computer Aided Process Simulation by Design II for Windows”, Dept. of Chemical Engineering, UTM (2000).

11. Manan, Z. A., Foo, D. C. Y., Lee, L. E. and Ooi, B. L., Chemical Process Design Achieve, Process Plant Design Project Compilation, Dept. of Chemical Engineering, UTM (2000).

12. Yunus, R. A. and Foo, D. C. Y., Separation Processes, Module Monograph on “Integrated Process Plant Management Scheme (IPPMS)” and “Chemical Engineering for Non-Chemical Engineers (CENCE)”, Chemical Engineering Pilot Plant, UTM (2001).

13. Foo, D. C. Y., Lim, F. Y. and Manan, Z. A., Computer Aided Process Simulation by Design II for

Windows, Workshop Monograph on “Computer Aided Process Simulation by Design II for Windows”, Dept. of Chemical Engineering, UTM (2001).

32

14. Yunus, R. A. and Foo, D. C. Y., Membrane Separation Processes and Cleaning, Course Monograph on “A 2-day Hands-on Course on Membrane Separation Processes and Cleaning”, Chemical Engineering Pilot Plant, UTM (2001).

15. Aziz, R. A. and Foo, D. C. Y., Global and Local Outlook of Chemical Process Industry, Petronas Operator Training Monograph, Chemical Engineering Pilot Plant, UTM (2000).

16. Foo, D. C. Y., and Manan, Z. A., Computer Aided Process Simulation for Continuous and Batch Processes, Workshop Monograph on “Hands-on Introduction to Process Simulation Modelling for Continuous and Batch Processes”, Dept. of Chemical Engineering, UTM (2001).

17. Foo, D. C. Y. and Kumaresan, S., Batch Process Modelling and Optimisation, Course Monograph on “A Two-day Hands-on Course on Batch Process Modelling and Optimisation”, Chemical Engineering Pilot Plant, UTM (2003).

18. Foo, D. C. Y., Computer Aided Process Simulation Project (SKC 4821), Course Monograph, Dept. of Chemical Engineering, UTM (2004).

19. Foo, D. C. Y. and Kumaresan, S., Wastewater Treatment Plant Design via SuperPro Designer, Course Monograph on “A Four Day Course on Wastewater Treatment Plant Operation and Troubleshooting”, Chemical Engineering Pilot Plant, UTM (2004).

20. Manan, Z. A. and Foo, D. C. Y. Water Minimisation by Pinch Technology, Course Monograph on “A Three and a Half Day Course on Maximising Energy and Water Savings in Process Industry Using Pinch Analysis”, Chemical Engineering Department, UTM (2004).

21. Foo, D. C. Y. Process Engineering Fundamentals, H81PEF Course Monograph, University of Nottingham (Malaysia Campus) (2005).

22. Foo, D. C. Y. Plant Design, H82PLD Course Monograph, University of Nottingham (Malaysia Campus) (2006).

23. Foo, D. C. Y. Chemical Product Design, H83CPD Course Monograph, University of Nottingham (Malaysia Campus) (2006).

24. Foo, D. C. Y. Process Synthesis and Design, H84PSD Course Monograph, University of Nottingham (Malaysia Campus) (2007).

25. Foo, D. C. Y. Computer Systems, H82CYS Course Monograph, University of Nottingham (Malaysia Campus) (2008).

33

Chemical Engineering Design Project Supervision

1. Crude oil refining – 14100 Barrel per day of gasoline production Institution : Chemical Engineering Dept, UTM Term / session : 2003 / 2004 Session I Duration : July – October 2003 Innovation : Hydrogen distribution network synthesis using hydrogen pinch analysis Co-supervisor : Dr Amer Mohammed Students : Chang Siu Hua (leader), Chan Hoey Yen, Fatimah Rubaizah bt Mohd Rasdi,

Sham Zahyra bt. Abdul Rahman, Nor Adha bin Omar 2. Production of 2000 MTA of Oleic Acid from Palm Olein Using Immobilized Lipase

Institution : Bioprocess Engineering Dept, UTM Term / session : 2004 / 2005 Session I Duration : August – October 2003 Innovation : i. Batch process simulation using SuperPro Designer

ii. Batch heat integration by pinch analysis Co-supervisors : Dr Lee Chew Tin, Liza Salleh (Bioprocess Engineering Dept, UTM) Students : Chew Yin Hoon (Leader), Noor Diyana bt Salleh, Norhayati bt Moslan,

Rosmaria bt Abu Darim, Vinosh A/L Sinnappu 3. Production of 50,000 MTA of Formic Acid

Institution : Chemical Engineering Dept, UTM Term / session : 2004 / 2005 Session II Duration : November 2004 – March 2005 Innovation : i. Process flowsheet synthesis using Douglas’ hierarchical approach

ii. Supertargeting for heat exchanger network synthesis (threshold problem) Co-supervisors : Mohd Johari Kamarudin Students : Tan Jully (Leader), Loh Kah Fang, Lidyayatty bt Abdul Malik, Nor Hafiziah bt

Abdul Hamid, Rodiffa bt Nasir 4. Production of 10,000 MTA of Animal Feed Additives

Institution : Bioprocess Engineering Dept, UTM Term / session : 2005 / 2006 Session I Duration : July – November 2005 Co-supervisors : Dr Lee Chew Tin (Bioprocess Engineering Dept, UTM) Students : Cheng Shu Ian, Siti Marsilawati bt Mohamed Esivan, Mohd Irham bin Idris,

Ilyanis bt Firdaus Jean Francois, Pua Hock Meng 5. Production of 50,000 MTA of USP Grade Benzoic Acid (BEng)

Institution : School of Chemical and Environmental Engineering, UNMC Term / session : 2006 / 2007 Duration : September 2006 – May 2007 Co-supervisors : Dr Abdelbaki Benamor Students : Phua Sin Wei, Ashvin Nesan Sivanesen, Seah Kok Yew

6. Production of 500,000 MTA of Ethylbenzene (BEng)

Institution : School of Chemical and Environmental Engineering, UNMC Term / session : 2007 / 2008 Duration : September 2007 – May 2008 Students : Gabriel Loh Jia Pei, Goh Min-Foong, Khor Yenli, Chiok Boon Hoong

7. Production of 500,000 MTA of Ethylene (MEng)

Institution : School of Chemical and Environmental Engineering, UNMC Term / session : 2007 / 2008 Duration : September 2007 – May 2008 Students : Chong Li Ping, Chew Kean Guan, Grace Teh, Poh Chin Hoe

34

8. Production of 120,000 MTA of butyl acrylate (MEng, Group 1) Institution : Department of Chemical and Environmental Engineering, UNMC Term / session : 2008 / 2009 Duration : September 2008 – May 2009 Students : Lee Kah Peng, Danny Khiew Nam Chien, Ili Izyan Syazwani, Tan Fang Chin

9. Production of 500,000 MTA of butyl acrylate (MEng, Group 2)

Institution : Department of Chemical and Environmental Engineering, UNMC Term / session : 2008 / 2009 Duration : September 2008 – May 2009 Students : Tiyor Sion Nean, Leong Weng Phoon, Nurul Jasneyta, Liyana Syazwani

10. Production of 500,000 MTA of purified terephthalic acid (MEng, Group 1)

Institution : Department of Chemical and Environmental Engineering, UNMC Term / session : 2008 / 2009 Duration : September 2008 – May 2009 Students : Lim Kian Vi, Ang Seng Heng, Teow Kiat Yin, Hoondal Ka'el Veen Singh

11. Production of 600,000 MTA of purified terephthalic acid (MEng, Group 2)

Institution : Department of Chemical and Environmental Engineering, UNMC Term / session : 2008 / 2009 Duration : September 2008 – May 2009 Students : Wan Alwin Thim Fatt, Ban Cecilia Yun Yang, Quek Wern Shen, Ramanathan

Thebban

MEng Research Project Supervision 1. Process integration for non-conventional areas

Duration : September 2006 – May 2007 Innovation : Process integration for supply chain management and energy planning Students : Leong Yew Jhin, Low Kean Way, Lee Sin Cherng

2. Integration for different water networks

Duration : September 2007 – May 2008 Innovation : Process integration for supply chain management and energy planning Students : Melwynn Leong Kuok Yauu, Sinthi Laya Thillaivarrna

3. Carbon-constrained energy planning

Duration : September 2008 – May 2009 Innovation : Chronological constrained composite curves, dynamic programming for

plantation planning Students : Diban A/L Pitchaimuthu, Wong Wai Hong, Chng Phui Kian

4. A New Flowrate Targeting Technique for Single Water Network and Total Site Integration

Duration : September 2008 – May 2009 Innovation : New graphical flowrate targeting technique Students : Lee Liangming, Lim Ming Hann, Saw Shin Yin

5. Targeting for Minimum Treatment Flowrate for Multiple Treatment Units

Duration : September 2009 – May 2010 Innovation : New graphical flowrate targeting technique for multiple waste treatment units Students : Sarah Soo Seen Teng, Kevin Yap Kar Keng, Toh Ee Ling

Major Symposiums / Courses / Workshops Attended 1. Attended Safety, Health and Environmental Seminar (SAFHENS ’98), UTM (1998)

35

2. Safety Induction Course on “Hydrogen Sulphide” (H2S), Shell Refining (FOM) Berhad (20 April 1999). 3. One-day course on “Understanding Natural Gas Hydrates and Acid Gas Compression and Injection”

organised by CEPP, UTM (15 November 1999). 4. Attended and presented a paper in 14th Symposium of Malaysian Chemical Engineers (SOMChE

2000), Bangi, Selangor (30-31October 2000). 5. Attended and presented a paper in Regional Symposium on Chemical Engineering, (RSCE) 2000,

National University of Singapore (11 – 13 November 2000). 6. Organised and attended a luncheon talk by Assoc. Prof. Dr. Duncan Fraser (University of Cape Town,

South Africa) “Application of Mass Exchange Network Synthesis”, CEPP, UTM (31 January 2001). 7. Attended and presented a paper at the 15th Symposium of Malaysian Chemical Engineers (SOMChE

2001), Johor Bahru, Johor (11-12 September 2001). 8. Organised and attended a Three Day Hands-on Course on “Energy and Waste Reductions in the

Process Industries: A Pinch Technology Approach”, BATC UTM KL (29 – 31 January 2002). 9. Attended/presented papers in 2nd World Engineering Congress(WEC2002), Sarawak (22-25 July

2002). 10. Attended and presented papers in Regional Symposium on Chemical Engineering (RSCE 2002), Kuala

Lumpur (28 – 30 October 2002). 11. Attended and presented papers in National Science Fellowship (NSF) Annual Workshop 2002, Kuala

Lumpur (17 – 18 December 2002). 12. Attended and presented paper in SHELL Student Paper Presentation Contest (SSPEC 2003), UTM (15

– 16 February 2003). 13. Attended and presented papers in Environment 2003, Batu Feringghi, Penang (18 – 19 February

2003). 14. Organised and attended a Two Day Hands-on Course on “Batch Process Modeling and Optimisation”,

BATC UTM KL (10 – 11 March 2003). 15. Attended National Symposium on Science & Technology “Strategic Research and Innovation towards

Economic Development”, Kuala Lumpur (28 – 30 July 2003). 16. Attended and presented papers in International Conference on Chemical and Bioprocess Engineering

(ICCBPE 2003), Kota Kinabalu, Sabah (27 – 29 August 2003). 17. Attended and presented papers in 6th Conference on Process Integration, Modelling and Optimisation

for Energy Saving and Pollution Prevention (PRES’03), Hamilton, Canada (26 – 29 October 2003). Attended and presented papers in American Institute of Chemical Engineers (AIChE) Annual Meeting, San Francisco, United State (16 – 21 November 2003).

18. Panel for forum “Problem Solving in R&D” in Academic Excellence Motivation Program for Postgraduate Student in FKKKSA 2004.

19. Master of Ceremony for Conference on Best Practises for Process Plant Management, Kuala Lumpur (29 – 30 March 2004).

20. Presenter, FKKKSA Postgraduate Student Society May Workshop, “Advancement in your career – How professional network can help” (6 May 2004).

21. Presenter and exhibitor in The Malaysian Society for Molecular Biology and Biotechnology Scientific Meeting (MSMBB 2004), Melaka (19 – 22 July 2004).

22. Attended and presented papers at the 18th Symposium of Malaysian Chemical Engineers (SOMChE 2004), Universiti Teknologi Petronas, Tronoh, Perak (13 – 14 December 2004).

23. Master of Ceremony for Conference on 2nd Best Practises for Process Plant Management, Kuala Lumpur (14 – 15 March 2005).

24. Attended, presented papers and conducted workshop at 2nd International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management (HNICEM 2005), Manila, Philippines (17 – 20 March 2005).Attended and presented papers at the 2nd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2005) in conjunction with the 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), Kota Kinabalu, Sabah (8 – 10 December 2005).

25. Attended and presented papers at the Regional Conference on Engineering Education (RCEE 2005), Johor Bahru (12 – 13 December 2005).

26. Workshop on Teaching Mass and Energy Balances, IChemE Malaysia Branch, 12 – 13 February 2007. 27. Postgraduate Certificate of Higher Education (PGCHE) programme of UNMC (Aug 2006 - 2009). 28. Attended workshop on Chemical Product Design, Universiti Putra Malaysia (December 2009). 29. Attended workshop on Fundamental of Chemical Safety and Health (April 2012).