7
Muhammad Awais Haider +923219654254 MUHAMMAD AWAIS HAIDER Cell # : +92-321-9654254 Email : [email protected] Total Experience: 06 Years 04 Months Objective: To join a dynamic and progressive organization offering ample opportunities for diversified experience, and seeking a position which will allow for continued professional growth, offering an environment in which advancement is based on strength of individual contributions to the realization of organizational goals. Personal Information: Father’s Name : Muhammad Abbas Date of Birth : 09-03-1990 Nationality : Pakistani C.N.I.C No : 36502-0893682-3 Domicile : Sahiwal (Punjab) Permanent Address : Street # 11, House No.1592/B-VII, Model Colony, Jahaz Ground, Sahiwal. Educational Qualification: B. Tech (Mechanical Production) (2009-2013) Bahauddin Zakariya University Multan, Sahiwal Campus. Marks Obtained: 1055/ 1400 (75.35%) (1 st Division) Higher Secondary School Certificate in DAE (Mechanical) (2006- 2009) Allama Iqbal Poly Technique Institute Sahiwal 1

CV Awais Haider Updated 01-02-2016

Embed Size (px)

Citation preview

Page 1: CV Awais Haider Updated 01-02-2016

Muhammad Awais Haider

+923219654254

MUHAMMAD AWAIS HAIDERCell # : +92-321-9654254Email : [email protected] Experience: 06 Years 04 Months

Objective:To join a dynamic and progressive organization offering ample opportunities for

diversified experience, and seeking a position which will allow for continued professional growth,

offering an environment in which advancement is based on strength of individual contributions

to the realization of organizational goals.

Personal Information:

Father’s Name : Muhammad Abbas Date of Birth : 09-03-1990

Nationality : Pakistani

C.N.I.C No : 36502-0893682-3

Domicile : Sahiwal (Punjab)

Permanent Address : Street # 11, House No.1592/B-VII,

Model Colony, Jahaz Ground, Sahiwal.

Educational Qualification:

B. Tech (Mechanical Production) (2009-2013) Bahauddin Zakariya University Multan, Sahiwal Campus.

Marks Obtained: 1055/ 1400 (75.35%) (1st Division)

Higher Secondary School Certificate in DAE (Mechanical) (2006-2009) Allama Iqbal Poly Technique Institute Sahiwal

Marks Obtained: 2526/ 3350 (75.40%) (1st Division)

Secondary School Certificate in Science (2004-2006) Govt. High School Sahiwal.

Marks Obtained: 706/1050 (67.23%) (1st Division)

Short Courses:

Mechanist (Mechanical Turner) (1st Feb 2007 to 30th Apr 2007) Government College of Technology Sahiwal.

300 Credit Hours (A+ Grade)

1

Page 2: CV Awais Haider Updated 01-02-2016

Muhammad Awais Haider

+923219654254

Training & Work Experiences:

1. Firm : M/s Nespak Foundation (Pvt.) Ltd.Duration : 1st January 2015 to datePosition : Mechanical InspectorProject : Metro Bus System Rawalpindi & Islamabad.Being the Mechanical Inspector the following tasks are performed.

Responsibilities: Supervised the different tests on steel member in a testing laboratory. Wet the fabrication and detailed drawing submitted by the contractor. Supervised the fabrication and erection of steel structure as per drawing. Supervised the welding quality tests of steel structure joints. Radio Graphic Test (RT),

Ultra Sonic (UT) and Dye Penetrate Test (DPT) to assure the quality of welding joints. Checked and supervised the installation of standard street light poles and standard

Traffic signal poles. Checked the installation of Aluminum Composite Panels (ACP) at steel structure Quality checking regarding paint works including surface preparing with sand blasting,

primer application, base coat and surface finish coat. Checked and supervised the installation of tampered glass on steel structure. Supervised the Fabrication and Installation of Mechanical Sheds. Checking and verification of Bill of Quantity regarding steel structure, paint works and

different mechanical works which perform on running project. Update and maintain daily progress report.

2. Firm : M/s Nespak Foundation (Pvt.) Ltd.Duration : 16th February 2014 to 31st December 2014.Position : Mechanical InspectorProject : Signal Free Junction at Metro Bus System Lahore.Being the Mechanical Inspector the following tasks are performed.

Responsibilities: Supervised the different tests on steel member in a testing laboratory. Supervised the fabrication and erection of steel structure as per drawing. Supervised the welding quality tests of steel structure joints. Radio Graphic Test (RT),

Ultra Sonic (UT) and Dye Penetrate Test (DPT) to assure the quality of welding joints. Checked and supervised the installation of different type’s poles like mono tube signal

pole, standard street light poles and standard Traffic signal poles. Quality checking regarding paint works including surface preparing with sand blasting,

primer application, base coat and surface finish coat. Checked and supervised the complete task of boring & installation of submersible,

Centrifugal, WASA and Sewage Disposal pumps. Supervise the installation of fiber sheet on different steel structure. Checking and verification of Bill of Quantity regarding steel structure, paint works and

different mechanical works which perform on running project. Update and maintain daily progress report.

3. Firm : M/s Nespak Foundation (Pvt.) Ltd.

2

Page 3: CV Awais Haider Updated 01-02-2016

Muhammad Awais Haider

+923219654254Duration : 16th December 2013 to 15th February 2014 datePosition : Mechanical InspectorProject : Metro Bus System Lahore.Being the Mechanical Inspector the following tasks are performed.

Responsibilities: Responsible for the installation of Underpass Canopies. Supervise the installation of fiber sheet on underpass Canopies. Supervise the installation of male female joint in steel structure. Checking and verification of Bill of Quantity regarding fiber sheet and steel structure of

underpass canopies.

4. Firm : M/s TURKPAK Engineering & Consultancy Services (Pvt.) Ltd.Duration : 1st February 2013 to 15th December 2013Position : Mechanical InspectorProject : Metro Bus System Lahore.Being the Mechanical Inspector the following tasks are performed.

Responsibilities: Responsible for the complete final inspection in respect of fabrication and erection of

steel Pedestrian Bridges and Bus Stations. Inspect the fabrication and erection of steel fence. Checked the fabrication and installation of mono tube signal pole, standard street light

poles and standard Traffic signal poles. Supervise the welding quality tests of steel structure joints. Radio Graphic Test (RT) and

Dye Penetrate Test (DPT). Quality checking regarding paint works including material base preparing, base coat

primer application, paint application and surface finish coat. Checking and verification of IPC and bill of quantity regarding mechanical & paint works. Checked and supervised the complete task of boring & installation of submersible

pumps. Checked the installation of Aluminum Composite Panels (ACP) at steel structure & water

leakage test of ACP. Checked the installation of sump pump. Supervised the installation of fire fighting system. Supervised the Fabrication and Installation of Mechanical Sheds. Supervised the installation of Fiber Sheet on Steel Structure. Checked and supervised the water proofing with membrane sheet on steel structure. Maintain daily progress report.

5. Firm : M/s IKAN Engineering (Pvt.) Ltd.Duration : 21st February 2012 to 30th January 2013.Position : Mechanical Supervisor (MBS, Package # 1&4).Project : Metro Bus System Lahore.

Job Description: To monitor implementations of modifications, as built and new revisions. Preparation of overall construction programs, monitoring project progress against

planned schedules, analysis in the change of contract scope / delay if any etc.

3

Page 4: CV Awais Haider Updated 01-02-2016

Muhammad Awais Haider

+923219654254 Monitor progress of the work assigned on daily basis by utilizing systems generated

reports in order to ensure the timely completion of the discipline work. Active role in preparations of Test Packages & Punch List during in the running project. Ensure that all factors related to work access like: scaffolding, excavation, fabricated

material entry at site etc have been taken care of in advance, in order to execute the work according to the plan.

Preparation of project reports like Daily Dairy, Weekly Report & Monthly Report for top management.

Monitor progress of Sub contractors and verify their Invoices. Preparation of Work Front for supervisors according to planning schedule.

Technical Responsibilities:Being the Mechanical Supervisor the following tasks are performed.

Supervise & inspect the fabrication and erection of steel Pedestrian Bridges and Bus Stations according to the drawing.

Supervise & inspect the fabrication and erection of steel fence & Mono tube signal pole. Supervise the Installation of fiber glass at steel structure according to the drawing. Quality checking regarding Paint works. Making of IPC& Bill of quantity regarding Mechanical works. Update and maintain daily progress report. Supervise the welding quality tests of steel structure joints. (DPT) Dye Penetrate Test. Checked and supervised the water proofing with membrane sheet on steel structure.

6. Firm : M/s Usman Engineering (Pvt.) Ltd.Duration : 1st October 2010 to 1st October 2011Position : Trainee Quality Inspector

Responsibilities:Being the Trainee quality inspector, the following tasks were performed:

Inspection & Testing of boiler welding joints. Checked the boiler fabrication. Checked the boiler pressure leakage testing. Maintain daily progress report.

7. Firm : M/s Soraj Fertilizer (Pvt.) Ltd.Duration : 1st October 2009 to 30th September 2010Position : Steam Turbine Operator

Responsibilities: Operation & Maintenance of steam turbine. Operation and maintenance of different pumps. Operate the different valves.

Project:

B.Tech Final Project:

4

Page 5: CV Awais Haider Updated 01-02-2016

Muhammad Awais Haider

+923219654254 Design and installation of water filtration and chilling Unit.

Professional Experience:

Microsoft Office Microsoft Windows XP, Vista, 7 and 8. Auto CAD Mechanical (2D) Good knowledge about computer Hardware & Software.

Communication Skills:

English, Urdu and Punjabi (Good in Speaking, reading & writing).Reference:

Will be furnished on request.

5