Upload
micaela-peppin
View
217
Download
0
Tags:
Embed Size (px)
Citation preview
DRILL PRESS
Safety Rules
Secure metal to the table using a clamp.
Remove key from chuck after bit is tight.
Place long end of metal on the left side of the column.
If the piece starts to spin keep the bit held down and turn the machine off.
METAL CUTTING BAND SAW
Safety Rules When using the band saw in the horizontal
position make sure to securely clamp the material.
When using the band saw in the vertical position make sure the table is screwed into position.
Do not force the blade into the cut. Let the machine do the work.
METAL LATHE
Uses
Used to turn a cylindrical object down to a smaller diameter.
Used to face the end of a piece to make it flat.
Used to cut threads.
METAL LATHE
Safety Rules
Turn the machine by hand before turning it on.
Secure the material in the chuck then remove the key.
Keep hands clear of moving parts.
Do not stand in front of the chuck when turning on the machine.
ABRASIVE SAW
Safety Rules Stand off to the side of the blade before
pulling the power switch.
Make sure the piece is tight in the clamp before cutting.
Pull the saw slowly through the metal.
Used to cut ferrous metals only.
BENCH GRINDERSafety Rules
Keep tool rest about 1/8” away from wheel.
Check wheel for cracks before turning on the machine.
Keep spark arrestor and face shields in place.
Used to grind ferrous metal only.
Use wheel dresser as necessary to keep wheel true.
ANGLE GRINDER
Safety Rules Never aim sparks in the direction of people or
flammable materials.
Keep the disc moving on top of the metal. Never hold it in 1 spot.
Do not use the edge of the grinding wheel to grind with.