CUTTER & DRILL PARTS, LLC

© Cutter & Drill Parts LLC. 2009

CUTTER & DRILL PARTS, LLCThe Standard of Quality

✦ PREMIUM QUALITY PRODUCTS

✦ FAST SHIPMENT

✦ LOWER PRICES

✦ MONEY BACK GUARANTEE

✦ LARGE INVENTORY IN STOCK

✦ SUPERIOR REPUTATION

✦ FRIENDLY & RELIABLE SERVICE

Cutter & Drill Parts LLC.31 Ciro Rd. North Branford, CT 06471

Local: (203)483-0876 • Toll Free: (800)443-5416Fax: (203)483-0224

Check us out on the web at www.cutter-drill.com

CUTTER & DRILL PARTSAdvantages

© 2009 CUTTER & DRILL. All rights reserved. No part of this catalog may be reproduced in any form. Unauthorized use of photos, copy or artwork is strictly prohibited.

The names Lawson, Challenge, Nygren-Dahly and others used are property of their respective holders. Cutter & Drill Parts hasno affiliation with these companies. The use of these names throughout this catalog is for identification purposes only.

Products Made with Pridein the USA!

Terms• $25.00 minimum order• Open account with credit approval• Net 30 days on most orders

(unless payment history deems COD)

Shipping Methods• UPS• FedEx• All shipping charges FOB North Branford, CT

Pricing is subject to change without notice

CONTENTS

CUTTING STICKS & ACCESSORIESKNIVESMICROCUT SYSTEM

CUTTING Pages 3-7Cutting Accessories .......... 3

Cutting Sticks .......... 4Knives .......... 5

Parts for Lawson Cutters .......... 6Microcut Cutting Systems .......... 7

DRILL BITSSHARPENERSHEADS & PARTSDRILLING TIPS

DRILLING Pages 8-17Drill Bits .......... 8

Drill Sticks and Drilling Tips .......... 9Drill Bit Sharpeners ........ 10

Head Repair and Rebuilding ........ 11Drill Heads and Parts for Lawson Single Spindle ........ 12

Parts for Lawson 3/4˝ Center to Center ........ 13Multiple Spindle Drill Heads for Lawson ........ 14

Frequently Replaced Drilling Machine Parts for Lawson ........ 15Parts for Challenge Drill Heads ........ 16

Parts for Nygren-Dahly Drill Heads ........ 17

DRILLING MACHINES

MACHINERY Pages 18-19Baum D3 - Three Hole Drilling Machine ........ 18

Baum D5 - Five Hole Drilling Machine ........ 19

✦ FEATURED PRODUCTS ✦Drill Head Exchange Program - Minimize downtime.Rebuilt drill heads are in stock for immediate delivery.Just return your head for housing exchange credit.See complete details on Page 11.

Rebuilding Kits - For CutterGear Boxes and Drill Heads.

See our handy Drilling Tipson Page 9!

OurLowerPrices

Punch Holesin the

Competition!

Cutter & Drill’s number one priority has always been“Success Through Customer Satisfaction”, and we havean impressive customer list consisting of small, medium,and Fortune 500 companies. Our pledge is to keep everycustomer satisfied, small or large.

To those of you who have yet to work with Cutter & Drill,we hope that you will give us the opportunity to serve you.

Contact us, and we will be happy to address any questionsand inquiries.

Do you have a friend who would like a copy of this catalog?Call toll free to request extra copies.

ABOUT US

OUR GUARANTEEAt Cutter & Drill we guarantee the quality of our productsor your money back. Immediate shipment of in-stock partswhen you order by 3PM (eastern). Error-free shipping andbilling ... or you get free shipping!

Interested in Opening an Account withCUTTER & DRILL PARTS ?

If you would like to get your company set up on openaccount just give us a call. For your convenience, wealso accept Visa, Mastercard, and American Express.

KNIFE CHANGING HANDLESThese sturdy handles are essential for providing safety when changing knives.

Mach. Model/Style Description Part # Price

Lawson Concentric 2-1/2˝ cast aluminumKnife Changing Knob with 1/2˝-13 fixed steelKnob “A” stud KNHK10 $ 42.75

Lawson Eccentric 2-1/2˝ cast aluminumKnife Changing Knob with off center 1/2˝-13Knob “B” rotatable steel stud w/pin KNHK11 49.35

Lawson/Seybold 1/2˝-12 & 1/2˝-13 threadWood Handle “C” (Stud = 1/2˝ long) KNH62 15.25Steel Handle “D” (Stud = 1-5/8˝ long) KNH64 25.00

Challenge - ALL 3/8˝-16 threadWood Handle “C” (Stud = 7/8˝) KNH61 13.65Steel Handle “D” (Stud = 7/8˝) KNH63 15.25

Polar 76, 82, 92 10mm thread (.394˝ dia.)Steel Handle “E” (Stud = 12mm long ) KNH65 19.10

Polar 107, 112, 12mm thread (.472˝ dia.)115, 137 (Stud = 12mm long)Steel Handle “E” Standard Duty KNH66 19.10

Polar 107, 112, 12mm thread (.472˝ dia.)115, 137 (Stud = 12mm long)Steel Handle “F” Heavy Duty KNH67 33.65

Triumph 10mm thread (.394˝ dia.)Steel Handle “E” (Stud = 20mm long) KNH69 19.10

C D E FA

B

PLASTIC JOGGER BLOCK PRICINGCUTTING ACCESSORIES

Call Cutter & Drill - For High Quality *Non-OEM Replacement Parts 3

Size Price

3˝ High x 8˝ Long $ 36.003˝ High x 10˝ Long 42.004˝ High x 8˝ Long 40.004˝ High x 10˝ Long 44.004˝ High x 12˝ Long 50.005˝ High x 10˝ Long 45.005˝ High x 12˝ Long 50.00

Size Price

5˝ High x 16˝ Long $ 70.005˝ High x 18˝ Long 80.006˝ High x 12˝ Long 60.006˝ High x 16˝ Long 80.006˝ High x 18˝ Long 95.006˝ High x 26˝ Long 130.00Custom Sizes Also Available

PLASTIC JOGGER BLOCKDurable Kimoplastic™ construction coupledwith an aggressive magnetic base insuresclean and precise jogging and alignment ofstock.

• 3˝ High, 4˝ High, 5˝ High, 6˝ High• Available in Various Lengths• New Lower Pricing!

CUTTER PAPER ANGULAR GUIDEFor printers that need to cut corners, this isthe right little tool.

• Cuts on Any Angle From 0 to 170• Slides & Locks onto Back Gauge• Cuts Corners, Tags and Shapes• Very Easy to Use $125.00

° °

MAGNETIC CLAMP PADProtects carbon paper, NCR and other stockfrom clamp pressure damage. A heavy-dutycushioned pad laminated to a rubberizedmagnetic strip prevents unwanted marks onthe valuable materials being cut.

• 2 Pads per Package - 3˝ Wide x 15˝ Long• Made in USA $29.95 / Pack

PLASTIC KNIFE GUARDEngineered & manufactured from a highimpact polymer for safety and security tomachine operators and your valuable blades.

• Essential for 3-Knife Trimmers• Made in USASpecify Length When OrderingOrder guard 1˝ longer than knife $1.50 / Inch

BACK GAUGE BOOK HOLD DOWNSThis is an essential tool to assure an evencut when trimming books on a guillotinecutter. Book Hold Downs attach to the BackGauge and compress the spine of the booksto assure a quality cut.

Part #CH5-7-M361 $20.00 Each

SHEAR BOLTS FOR LAWSON AND POLAR*

REF. PART# PRICE DESCRIPTIONA Lawson Pace. III, V Steel shear pin has a socket head and is 2-1/2˝ long

Part #SBS094 below the head. It is threaded 3/8-16 and the shank is$8.50 cut down as shown in the photo.

B Polar 71, 72 Alloy steel shear pin w/hex head & hex nut. Both 12mmPart #SBS105 (.472˝) across flats. Shank is 1.770˝ below head, thread$19.60 is 8mm (.315˝). Pitch is .75mm (34 threads per inch).

C Polar 76 Alloy steel shear pin is complete with washer faced hexPart #SBS104 nut and roll pin. Head is 3/8˝ thick by .860˝ dia. Shank is$27.50 1-27/32˝ below head, and is threaded 12mm (.472˝).

D Polar 82, 86, 90, 92 Steel shear pin, w/washer faced hex nut. Shank is 9mmPart #SBS091 (.354˝) dia. except where undercut. It is 54mm (2.125˝)$19.60 long below head, thread is .75mm pitch (34 threads/in).

E Polar 92EMC Alloy steel shear pin w/round head, cross drilled for pin.Part #SBS107 Head is 24mm (.945˝ dia.). Shank is 48mm (1.890˝ )$28.85 below head, threaded 14mm (.551˝) with 1.0mm pitch

(25.4 threads per inch). Washer faced hex nut is 19mm(.748˝) across flats.

F Polar 115EMC Steel shear pin including hex nut. Shank is 12mmPart #SBS092 (.472˝) dia. except where undercut. It is 65mm (2.563˝)$24.00 long below head. Thread is 1mm pitch (25.4 threads per

inch). Hex head is 17mm (.669˝) across flats.

G Polar 115EMC Alloy steel shear pin includes washer faced hex nut.Part #SBS103 The head is 1.180˝ dia. x .394˝ thick. A flat on the head$45.95 is also provided. Shank is 2.330˝ long below the head,

and has a 16mm (.630˝) thread. Groove is .062˝ deep.

H Polar 137EMC Alloy steel shear pin has the same dimensions asPart #SBS102 SBS103 except that the groove is .051˝ deep.$45.95

*Other Shear and Knife Bolts Available - Call for Details!

A B C D E F G H

Inch / Metric Inches x 25.4 = mmConversion: mm x .0394 = Inches

CUTTING STICKS

4 To Order - Call 1-800-443-5416 LOCAL: (203) 483-0876 FAX: (203) 483-0224

PRICE PER INCHStick Standard Hard White

Name of Cutter Size White Red NylonAdast (.551) 9/16˝ square 12¢Challenge 1/2˝ square 8¢ 12¢ 70¢Chandler & Price 1/2˝ square 8¢ 12¢ 70¢Dexter-Brackett 3/4˝ square 13¢ 14¢EBA/Multicut (.551) 9/16˝ square 12¢FL-Flag .155˝ x .386˝ 13¢Horizon Guillotine .472˝ square 18¢ 24¢ 85¢Ideal (.551) 9/16˝ square 12¢Ideal .236˝ x .745˝ w/holes 36¢Imperial / Embassy .155˝ x .386˝ 18¢ 70¢Imperial / Embassy .315˝ x .775˝ 16¢Itoh .625˝ square 12¢Lawson Pacemaker 3/4˝ square 13¢ 14¢Lawson Regent .585˝ square 14¢Martin-Yale 1/2˝ square 8¢Maxima (.551) 9/16˝ square 12¢Michael Business (MBM) (.551) 9/16˝ square 12¢Michael Business (MBM) .236˝ x .745˝ w/holes 36¢Michael Miracle .625˝ square 12¢Mandelli .625˝ square 12¢Oswego 3/4˝ square 13¢ 14¢Perfecta / Seypa .394˝ square 12¢Perfecta / Seypa 5/8˝ square 12¢Perfecta / Seypa .197˝ x .394˝ 16¢ 20¢Pivano .394˝ square 12¢Pivano .197˝ x .394˝ 16¢ 20¢Polar (Orange) 3/16˝ x 3/8˝ Wavy 8¢Polar (Premium Grey) 3/16˝ x 3/8˝ Wavy 10¢Polar (White Nylon) 3/16˝ x 3/8˝ Wavy 12¢Prism (See Polar) 3/16˝ x 3/8˝ WavyPro Cut 1/2˝ square 8¢Pro Cut (See Polar) 3/16˝ x 3/8˝ WavyReliant 5/8˝ square 12¢Royal Zenith .394˝ square 12¢Royal Zenith 5/8˝ square 12¢Royal Zenith .197˝ x .394˝ 16¢Royo / Campeador 5/8˝ square 12¢Saber 3/4˝ square 13¢ 14¢Schimanek 3/16˝ x 1/2˝ 14¢Schimanek 3/16˝ x 5/8˝ 16¢Schneider Senator .551˝ square 12¢Schneider Senator .118˝ x .472˝ 18¢Schneider Senator .180˝ x .384˝ 22¢Seybold 3/4˝ square 13¢ 14¢Seypa (See Perfecta)Triumph / Trojan (See MBM)Wohlenberg .512˝ square 10¢Wohlenberg .585˝ square 14¢Wohlenberg 3/4˝ square 13¢ 14¢Wohlenberg .155˝ x .394˝ Wavy 14¢ 40¢Wohlenberg .155˝ x .688˝ 18¢Wohlenberg .155˝ x .712˝ 13¢

STANDARD CUTTING STICKS

Long-life Cutting SticksAs with all of our products, we are very proud of the qualityof our cutting sticks. Available in a wide variety of materials,our premium quality cutting sticks will extend knife life andproduce cleaner cuts. We think you will agree the value isexceptional.

• STANDARD AND CUSTOM SIZES AVAILABLE• MINIMUM ORDER - ONE DOZEN

PRICE PER INCHStick White Red Grey White Black

Name of Cutter Size (HDPE) (UPVC) (PPH) Nylon Nylon

Challenge .125˝ x 13.5˝ sq. 1.20

Horizon Three-KnifeFront .472˝ square 41¢Side .278˝ x .590˝ 53¢

KolbusFront and sides .394˝ square 20¢ 30¢ 40¢Front .787˝ sq. w/bevel 37¢ 55¢ 63¢Side .155˝ x .787˝ 20¢ 37¢ 55¢

Lawson / WohlenbergFront (RT-901) .155˝ x .945˝ 10¢ 12¢ 40¢Side (RT-903) .155˝ x 2.375˝ 21¢ 30¢ 75¢

Muller / MartiniFront and sides .394˝ square 20¢ 30¢ 40¢Front and sides .394˝ x .787˝ 25¢ 35¢ 50¢

Perfecta Three-KnifeFront and sides .625˝ square 12¢

Royal Zenith 3-KnifeFront and sides .625˝ square 12¢

Sheridan VTFront and sides .500˝ square 8¢ 12¢ 70¢

Stahl / VBF / Hoerauf .155˝ x .510˝ 16¢ 25¢

Swiss Hydrocut .551˝ square 12¢

Vijuk .500˝ square 8¢.551˝ square 12¢.118˝ x .472˝ 18¢.155˝ x .472˝ 34¢.180˝ x .384˝ 34¢.197˝ x .745˝ 34¢

Wohlenberg Three Knife - See Lawson

THREE-KNIFE TRIMMER STICKS

SHORE DCOLOR/MATERIAL HARDNESS APPLICATIONStandard White (HDPE) 67-68 The standard by which all sticksHigh Density Polyethylene are measured. Self healing and

non-abrasive, works well with allgrades of steel.

Premium Grey (PPH) 74-76 Elasticity allows the stick to recoverPolypropylene from knife cuts. Exceptional for

high-speed steel and long lifecarbide.

Orange/Hard Red (UPVC) 80-82 Harder than standard whiteUnplasticized Polyvinyl Chloride and premium.White Nylon 82-85 Best suited for mega-life carbide.Same as Herculite Made exclusively for 3-knife trimmers.Black Nylon 85+ Hardest stick available.

Extremely durable.

High Quality Cutter KnivesWe’ve selected our knives for wear resistance and durabilityto assure that you maintain long term service and economy.Compare our quality and prices!

Cutter & Drill offers a broad selection of Knife Grades, so youcan choose the right knife for every need:

STANDARD INLAY - A hardened inlay bonded to a tough steel backing.Provides excellent performance and cost effectiveness without severeedge and face bow common on solid tool steel knives.

HIGH CARBON/HIGH CHROME - Widely used for lower knives in three knifetrimmers, this grade has 14% chromium which provides excellent wearresistance and out performs standard steel 2 to 1.

HIGH SPEED STEEL - Designed to be more abrasion resistant with an18% tungsten steel inlay. This knife will substantially reduce downtimeand guarantees three to five times longer life. A great choice for cost & value!

MEGA-LIFE CARBIDE - More than exceeds the cutting quality and enduranceof steel knives. Mega-life is the newest development in super micro-fine graintungsten carbide. These state-of-the-art blades display an even higher wearresistance than standard carbide knives. Ask about our trial program!

******************

Knives For:ChallengeConsolidatedHarrisItohKolbusLawsonMacyMcCainMullerPivanoPolarRosbackSchneiderSeyboldSheridenStahlTriumphWohlenberg& many more!


BINDERY SUPPLIESKNIVES*Quality Aftermarket

• High Quality Imported German Steel

• Ten+ Times the Service Life of Standard Blades

• Reduced Tendency of Edges Breaking

• The Best Knife for High Volume or Continuous UseSpecify machine model / steel grade / blade dimensions when ordering.(Note: Mega-Life knives have special grinding requirements).

Carbide paper cutting knives have been available for a long time.New however, is the development of a super fine grain carbide.As shown above, the structure is far tighter resulting in an edgethat is much less likely to chip or wear. Compared to anyavailable knife material, Mega-Life* is the best!

Standard Grain Structure 1500X Mega-Life Grain Structure 1500X

Get the Mega-LifeAdvantage!

6 Call Cutter & Drill - For High Quality *Non-OEM Replacement Parts

LAWSON CUTTERS

• Hard to find parts still available• Call us for Lawson cutter parts not listed on this page

Assorted Cutter Parts

COMMON LEFT HAND GEAR BOX PARTS - FOR 42˝ THROUGH 69˝ LAWSON PACEMAKER CUTTERS

Keep your cutter operations up and running longer and with more efficiency withour quality repair parts — including parts for Lawson* Pacemaker cutters.

LEFT HAND GEAR BOX

$3,950• Contains New Worm Shaft and Worm Gear.• New Bearings, Seals and Shims.

COMMON RIGHT HAND GEAR BOX PARTS - FOR 42˝ THROUGH 69˝ LAWSON PACEMAKER CUTTERS

RIGHT HAND GEAR BOX

RIGHT HAND GEAR BOX REBUILD KIT

• Contains New Worm Shaft and Worm Gear.• New Bearings, Seals and Shims. $4,950

Prices subject to change without notice. * Price based on core exchange of used part.Note – Call to specify machine model and obtain pricing.

*Lawson is a registered trademark.

Lawson is a registered trademark.*

LEFT HAND GEAR BOX REBUILD KIT

Ref. CD Part Description Price1 6BA2055 MOUNTING PLATE $ 269.002 6206 BALL BEARING 99.003 958 LOCK NUT N-08 3.454 1158 WASHER W-08 .955 6012 BALL BEARING 30.006 6BA2025 SPACER 42.007 See Note FLYWHEEL CALL8 6BA2027 SPACER 75.009 LCM-18 SPRING 125.0010 LCM-30A BRUSH 9.5011 See Note CLUTCH RING & LINING CALL12 See Note ARMATURE PLATE ASSEMBLY CALL13 See Note BRAKE RING ASSEMBLY CALL14 6BA1075 SHIM KIT 125.0015 6015 OIL SEAL 295.0016 6BA2058 SPACER 39.0017 6014 BALL BEARING 94.6018 6017 OIL SEAL 245.0019 6016 BALL BEARING 78.0020 6BA6011 WORM SHAFT 2,855.0021 964 LOCK NUT N-14 8.9522 1164 WASHER W-14 1.9523 6044 NEEDLE BEARING 10.1524 See Note CRANK SHAFT CALL25 6020 OIL SEAL 10.0026 6019 OIL SEAL 52.0027 6018 ROLLER BEARING 435.0028 6023 ROLLER BEARING 72.0029 6BA5007 WORM GEAR 1,550.0030 6BA6005* REBUILT GEAR BOX R.H. 6,500.00

(With Core Exchange)

*Quality AftermarketParts For:

Ref. CD Part Description Price1 6BA1075 SHIM KIT $ 125.002 6017 OIL SEAL 245.003 6016 BEARING 78.004 6BA5006 WORM SHAFT (See Below) 1,855.005 6044 NEEDLE BEARING 10.156 964 LOCK NUT N-14 8.957 1164 WASHER W-14 1.958 6019 OIL SEAL 52.009 6018 ROLLER BEARING 435.00

10 6023 ROLLER BEARING 72.0011 6BA5007 WORM GEAR (See Below) 1,550.0012 6BA6006 REBUILT GEAR BOX L.H. 5,500.00

(with core exchange)

• Works with Any Brand or Size Cutter

• Speeds Production by Allowing ProgramEntry While Cutting the First Lift

• Automatic Computation andEntry of Fractions

• Self Diagnostic Electronics

• Over 20,000 Installations Worldwide

• 1 Year Parts Warranty

To Order - Call 1-800-443-5416 LOCAL: (203) 483-0876 FAX: (203) 483-0224 7

microcut ® CutterAutomation SystemsThe microcut system memorizes cuttingsequences instantly, stores them indefinitelyand recalls them at the touch of a button.The system frees the operator from thewasted time and risk of error associated withrepetitive data entry. Its ability to automaticallyprogram a job while cutting the first lift turnsset up time into productive time, makingautomation effective for even two or threelift jobs.

Many paper cutters already have some form ofautomatic back gauge control, but may havebecome difficult and expensive to maintain.These machines are generally sound mechanicallyand, with the addition of a microcut system, canquickly and easily be returned to a high level ofproductivity and reliability for a fraction of thecost of a new machine.

MICROCUT CUTTING SYSTEMS

Increase Cutter Production and Improve Accuracy!microcut® moves the back gauge into the correct position faster and more accurately than skilled manualoperation. This often translates into an impressive 50% or greater increase in productivity!

Freight & Installation Not Included.Approx. installation is $1000 + travel & expenses.

$7500.00

$350.00 additionalcharge for machines65˝ and over for larger1hp motor.

Leasingoptions

available!

microcut ®

microcut features a full color8 inch LCD display and sophisticatedoperator interface. Additional featuresinclude a floppy disk drive for dataexchange, including software updates.It also serves as an inexpensivemedium for storing job data.Standard with each system ismicrofacts® and cutternet®.

microfacts® automatic data collection systemwill capture in real time all information relative tothe job and productivity, for downloading to a PC.

cutternet® allows one or more cutters to benetworked for data exchange or programmingfrom a remote PC.

+

microcut ® jr.microcut jr. is designed to automate backmovement on any paper cutter 37˝ orsmaller. An easy-to-read LCD display,featuring icons and symbols, guides theoperator through all programmingoperations. Set up is fast and simple, withno complicated codes to memorize orreference. The current back gauge positionis clearly displayed in inches, centimetersor millimeters, depending on operatorpreference.

Freight & Installation Not Included.Approx. installation is $1000 plustravel & expenses.

$4000.00

microcut ® basicThe basic microcut is also suitable for any sizecutter. It has a large 5˝ LCD multi-lingualdisplay which guides the operator through allprogramming operations. Keyboard entry andreview of programs is quick and easy.Advanced programming options include labeland sheet divide, allowing complicated jobs tobe programmed with only a few data entries.

Fractions, lay changes, additions, or deletionscan be easily entered through the keyboard.Non volatile memory insures data retention.The system’s patented new H2 DC driveassures mechanical repeatability of the backgauge position to +/- .002 inch regardless oflead screw wear.

Lease forjust $200

a day!

$6000.00Freight & Installation Not Included.Approx. installation is $1000 plustravel & expenses.$350.00 additional charge for machines65˝ and over for larger 1hp motor.

+

• We make sure our drills run right, and are of the highest durability. Panther Drills use only the finest grade high-speed steel.

• Made to extremely high quality standards, the mirror finish makes it easy for chips to empty, avoiding choking and breakage.

• Our new Black Panther™ Coated Drills utilize our special Teflon™ coating process. Each drill bit is evenly coated and bakedat a controlled temperature for consistent temper and durability.

At Cutter & Drill, you don’t have to sacrifice quality to get a good price!

ChallengeChallenge LongIramIram LongLawsonLawson LongNygren-DahlySeyboldSpinnetSpinnet Long

5/32˝ 3/16˝ 7/32˝ 1/4˝ 9/32˝ 5/16˝ 11/32˝ 3/8˝ 13/32˝ 7/16˝ 1/2˝

✔ ✔ ✔ ✔

DRILLCAPACITY

TYPE

PREMIUMHIGH-SPEED

STEEL

BLACKPANTHERTEFLON

$18.50 $22.50$21.50 $25.50$26.00 $30.00$29.50 $34.50$18.50 $22.50$21.00 $25.00$19.00 $23.75$20.50 $24.50$21.95 $25.95$18.50 $22.50

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

1/8˝

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔

✔

✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔

✔ ✔

✔

Drill Bit Capacity: ✔ = Less than 2˝ ✔ = 2˝ to 2-1/4˝ ✔ = 2-1/2˝ to 3˝

The above brand names are trademarks of their respective companies used for identification purposes only.Panther Steel & Black Panther Teflon Coated Drills are not OEM parts, they are high quality aftermarket parts, compatible with the above brands.

5%Discounton Orders

of 12or More!

DRILL BITS FOR: • CHALLENGE • LAWSON • NYGREN-DAHLY • SEYBOLD • IRAM • SPINNET

DRILL BITS


BLACK PANTHER™

TEFLON™ COATED DRILLS!THE ULTIMATE DRILL BIT!

• Cuts Cleaner Holes & Stays Sharp Longer• Runs Smoother - Less Friction & Breakage• Assists Passage of Chips to Avoid Choking

1) Most drill breakage is caused by operating dull and/or unseated drills. To prevent the drill from ramming into thedrill stick, make sure that the drill bit is engaged on the drive pin inside the spindle. Also be sure to remove slugsand sharpen drills after every shift change.

2) Be careful not to use excessive pressure when sharpening drill bits. Even a slight expansion at the cutting edge willcause the drill to cut a larger diameter chip than it was designed for. This will lead to excess friction or clogging,resulting in reduced life, or could even cause the drill bit to split.

3) Check the belts on the drilling machine. They should be reasonably tight. Loose belts slip and cause overheatingand/or excess pressure on hollow drills.

4) Heat is the biggest cause of drill bit failure. When a bit gets too hot it loses its temper, causing the cutting edge to become dull. The drillshould never turn color from overheating. Remember that a paper drill must be sharp enough to cut through the paper, not punch it.

5) Important! To prevent the drill from overheating, the speed and feed should be adjusted for the stock being drilled.Generally, the softer the stock, the slower the feed. Increase the RPM of the drill bit when drilling smaller diameterssuch as 1/8˝ or 3/16˝. When drilling larger diameters, the RPM should be decreased. Set the machine to exit thestock as rapidly as possible once the hole is drilled to avoid excessive heat from spinning the drill in the stock.

6) Set the drilling depth correctly. Do not cut too deeply into the cutting block. The drill should just touch the block andcleanly cut through the bottom sheet. During drilling, do not set the drill deeper into the block, but change the positionof the block frequently. Drilling deeper into the block dulls the drills more quickly.

7) Lubricate drills to assist the passage of the chips and help avoid overheating. (See our Drilling Lubricants on Page 10)

Squeal


DRILL STICKS & TAPE / DRILLING TIPS

INFO TIP: Replace sticksfrequently. This preventspremature rounding ofthe drill edge, giveslonger life, and reducesthe need for drill bitsharpening.

Cutter & Drill has the drill blocks and sticks you need!We stock a variety of sizes and lengths to fit most popularmachines. We also stock drilling tape for use on highproduction drilling machinery.

DRILL BLOCKS AND STICKS

• Long Grain Maple - For machines requiring a thinner or longer stick.• Premium End Grain Maple - A harder stick, specifically laminated

together for dimensional stability and durability, end grain maple insuresincreased stick life.

Long Grain

End Grain

3/4˝ x 4600 ft. RollsWeight per Roll: 33 lbs.

Part #11902 $120 per Roll

Special Replacement Backing Stick - used with above drill tape on in-line drills.

Part #C10932 $145.00

SPECIAL DRILL TAPELooks like smooth strapping, butthis special plastic tape works asan indexing drill stick for fullyautomated Lawson™ “Classic”drilling machines.

• Top Quality Sticks Insure a Clean Hole on Last Sheet

New LowerPricing!

DRILLING TIPS

Brand Size Price per Pack

3/4˝ x 1-1/2˝ Dia. Round $ 7.50 / 1-Dozen3/4˝ x 2-1/2˝ Dia. Round 12.00 / 1-Dozen3/4˝ x 3˝ Dia. Round 15.00 / 1-Dozen3/8˝ x 1-1/4˝ x 6˝ Oblong 21.50 / 3-Dozen3/8˝ x 1-1/8˝ x 8-5/8˝ Oblong 21.50 / 3-Dozen3/8˝ x 1-1/8˝ x 12-1/2˝ Oblong 29.00 / 3-Dozen3/8˝ x 1-1/8˝ x 24˝ Oblong 70.00 / 3-Dozen3/8˝ x 1-1/4˝ x 6-5/8˝ (Old) Oblong 21.50 / 3-Dozen5/16˝ x 1-1/4˝ x 6-5/8˝ (New) Oblong 21.50 / 3-Dozen3/4˝ x 2-3/16˝ Dia. Round 15.00 / 1-Dozen5/8˝ x 2-3/8˝ Dia. Round with Hole 18.00 / 1-Dozen3/16˝ x 1˝ x 10˝ Oblong 14.00 / 1-Dozen

Challenge

Lawson

Nygren-Dahly,BaumPioneerSpinnetIram

Challenge has replaced thiselectric sharpener with theHandy-Sharp. However,reamers and adapters aboveare interchangeable withboth models.

OurLowerPrices

Punch Holesin the

Competition!

Individual sticksor packaged24 per box.

CHALLENGEHANDY-SHARPPart #57100 $350.00

• Handles Drills from 1/8˝ to 1/2˝• Benchtop Design is more Economical than Electric• Spring Loaded Reamer Eliminates Flaring of Bit• Handles Standard and Long Drill Bits• Adapters Available for Lawson & Nygren-Dahly (Specify Drill Type When Ordering)

DRILL BIT ADAPTERSAllow sharpener to work

with most brands of drill bits$59.95

#6469 CHALLENGESingle Flute Carbide Reamer

1/2˝ Shank$80.00

With Single Flute Carbide Reamer - Part #DS-1F $135.00With Three Flute Carbide Reamer - Part #DS-3F $165.00

HAND SHARPENER

• Handles All Sizes of Drills from 1/8˝ to 1/2˝• Pays for Itself Many Times Over Through Longer Drill Life• Self Centering Sharpening Bit Exactly Meets Drill Bit Center• Carbide Sharpening Bit is Easily and Economically Replaced (Specify Drill Type When Ordering)

FOR BEST RESULTS - KEEP DRILL BITS SHARP!Cutter & Drill Parts offers a variety of high quality carbidereamers to accommodate almost any sharpening device.

Replacement Carbide Reamers

#4952 #B2830 #DSR-3F

NYGREN-DAHLYThree Flute3/8˝ Shank

LAWSONThree Flute5/16˝ Shank

CHALLENGESingle Flute3/8˝ Shank

MULTI-USETwo Flute3/8˝ Shank

MULTI-FLUTE25 Flute

1/4˝ Shank

#DSR-2F #DSR-MF

$40.00$80.00$80.00$40.00$60.00

A quality drill sharpener is a must, and these simple tools quickly sharpen your drill bits to the right “bevel”.

Sharpen drill bits in seconds to keep production flowing.Hand operated models to fit any application.

DRILL BIT SHARPENERS


DRILL-EASE LUBRICANT STICK• A dry stainless multipurpose lubricant.• Eliminates binding and excessive heating of the drill.• Recommended for use on hollow drills when drilling

clay coated stocks.• Will not discolor stock.

Part #CH4688$1.59 Each (1-11 sticks)$1.35 (12+ sticks)

• Extra Thick Wax Coating• Prevents Plugging & Choking

10 sheet count(8-1/4˝ x 11-3/4˝)

WAXPAPER $15.00

DRILL-QUICK™ WAXED DRILLING PAPERThis excellent product lubricates both the inside and outside of the drill bit forsuperior drilling and chaff release. Perfect for multiple drill head applications.

Simple to use. Periodically place sheet on top of lift and continue drilling normallywhenever lubrication is required.

The primary cause for drill breakage is a dull bit. For best results, drill bits should be sharpened after every 4 to 8 hours of use. They should be sharpened evenmore often when drilling through hard stocks, fiberboard, or abrasive stocks. Always be sure to clear the bits before taking a break, going to lunch, or finishingthe day. Once a drill bit cools down and shrinks on the chips, your chance of breakage at start-up triples.

Check your drill sharpener - the cutting edge of the sharpening bit should be inspected frequently to make certain that it is sharp and free of nicks.Never let a drill drop onto the sharpening reamer or it will chip the sharpening edge. Use gentle pressure when sharpening - let the reamer do the work.Check the sharpness of the drill after sharpening - the cutting edge should be razor sharp.

SHARPENING TIPS

New!

*Call in advance to check the schedule - delivery times can vary.

Bare Housing

1) After receiving your order, we will immediately ship you a completely rebuilt drillhead from our stock. Each of our rebuilt drill heads has undergone a thoroughoverhaul, and Every moving part has been replaced with a brand new part. Everyrebuilt unit is backed by our full 6 month guarantee against defective parts and labor.

2) Once we receive your old drill head, and inspect it to make sure the casting is OK,we will issue you a credit of $100.00.

At this time, the exchange program is limited to Lawson single spindle drill heads.Nygren-Dahly Heads coming soon! Call for pricing and details.

Rebuilt Head ...... $695.00Exchange Credit: – 100.00Your Cost is only $595.00!

*after exchange credit

™✦ LAWSON DRILL HEAD EXCHANGE PROGRAM ✦ Only $595.00!*


• No Obligation, Free Cost Appraisal• Heads Are Repaired to “Like-New” Operating Condition• All Repairs Are Machine Tested for Optimum Performance

With over 23 years of experience in manufacturing new drill heads, we’rethe logical choice for repairing yours. Each head is first stripped down tothe bare housing, degreased, and then inspected for worn or damagedparts. Once appraised, we will call with a cost estimate for your approvalif requested.

Upon approval, our expert staff will check and verify all tolerances whilereplacing any necessary parts. We then re-lubricate and machine test eachhead to return your unit to peak operating efficiency.

You can be confident that when you receive your rebuilt headyou will be “good to go!”

Don’t have time to repair your heads?Let Cutter & Drill repair them for you!

HEAD REPAIR & REBUILDING

IMPROVE YOUR DRILL HEAD!Thinking about rebuilding your head? Now is the time toconsider our new Vise Grip Type Spindle Retrofit Assembly.

Part #B9000

• Fits ALL Lawson Heads

• No Special Wrench Required

• Holds Drill Bits Tight

• Quick Drill Bit Changes

• Extends Spindle Life byAvoiding Cross-Threading

The new CUTTER & DRILL PARTS heavy-duty retrofit assemblyis interchangeable with, and replaces all other Lawsonspindles, and costs a lot less.

$ 225.00

Try the NEW “State of the Industry” Vise Grip Spindle!

PremiumQuality

ReplacementParts

Special GreaseDesigned to liquefyand flow to criticalgears and bearings,liberal use protectsthem from gallingand seizing.

1 Quart Can - 2 lbs.#B7500 - $16.00

LAWSON DRILL HEADS*Quality AftermarketParts For:


Ref. CD Part Description Price1 B2521 THRUST PLATE $ 17.002 ------- #10-24 x 3/8˝ FLAT HD. MACHINE SCREW .353 B2518 THRUST WASHER 6.004 B6255A BEVEL GEAR (Replace in Pairs With #12) 45.005 B2519 BUSHING 54.506 B7950 SPINDLE 6-3/32˝ (2˝ & 3˝ Cap. New Heads) 125.00

6A B6309 SPINDLE 6-11/32˝ (2˝ Cap. Old Heads) 125.006B B8004 SPINDLE (Clip Type) 125.006C B10124 SPINDLE (Nut Type - Hardened/Needle Brg.) 125.006D B10105 SPINDLE (Nut Type - Standard) 125.006E B2847 SPINDLE (9/16˝ Clip Type) 168.507 B10128 LOWER BUSHING 25.00

7A B11521 NEEDLE BEARING (Some Newer Heads) 6.758 ------- #4-40 x 5/16˝ FLAT HD. MACHINE SCREW .359 A3039A COLLET ASSEMBLY 26.50

9A A1267 SPLIT WASHER (Collet) 1.759B A7817 COLLET NUT 15.509C A7821 WASHER (Collet) 1.359D A7903 TRU-ARC RING .509E A7948 COLLET SLEEVE 15.509F B11092A COLLET WRENCH (Not Shown) 32.5010 B7461 GREASE WICKING (Per Foot) 7.5011 B1009 SPRING CLIP (For Clip Type Spindle) 3.7512 B6254A PINION GEAR (Replace in Pairs With #4) 24.0013 B2509 THRUST WASHER 9.0014 B2511 TOP BEARING (Standard Heads) 20.00

14A B10127 TOP BEARING (Needle Bearing Heads) 22.5015 B2882 LOCK NUT 4.0016 B3270 LOCK WASHER 2.5017 B1289 THRUST BEARING (Replace in Pairs) 18.5018 B2857 SPRING 2.7519 B3280 1/8˝ BALL .2520 B2512 ADJUSTING SLEEVE (Standard) 26.50

20A B10129 ADJUSTING SLEEVE (Needle Bearing Heads) 26.5021 B2788C R.H. HOUSING 565.00

21A B2500C L.H. HOUSING 565.0022 ------- #10-24 x 1/4˝ SOCKET HD. SET SCREW .3523 ------- #10-24 x 1/2˝ SOCKET HD. SET SCREW .3524 B7771 GIB - Brass 13.00

Ref. CD Part Description Price24A B6744 GIB- Steel (Plate Type) $ 28.5025 ------- 1/4-20 x 1/2˝ HALF DOG PT. SET SCREW .3526 ------- 1/4-20 x 1/4˝ SOCKET HD. SET SCREW .3527 B2801 PLUG 4.0028 ------- #6-32 x 3/8˝ FLAT HD. MACHINE SCREW .3529 ------- #6-32 x 5/8˝ FLAT HD. MACHINE SCREW .3530 B6588 ADJUSTING KNOB (New Style 1-1/16˝ Dia.) 28.50

30A B2513 ADJUSTING KNOB (Old Style 15/16˝ Dia.) 28.5031 B6627 GIB SCREW 2.5032 ------- 3/8-24 x 1-1/2˝ SOCKET HD. SET SCREW 1.3533 ------- 3/8-24 x 1/2˝ SOCKET HD. SET SCREW .3534 B2841 PLUG WITH GASKET 1.00

34A B2812 PLUG 1.0035 B8180 UPPER BLOCK 19.7536 ------- #8-32 x 1/2˝ SOCKET HD. CAP SCREW .3537 B7940 PRESSURE FOOT ROD – 14˝ 8.75

37A B10611 PRESSURE FOOT ROD – 12-5/8˝ (Air Type) 24.0038 B7947 PRESSURE FOOT SPRING – 10-9/16˝ 6.95

38A B10610 PRESSURE FOOT SPRING – 8˝ (Air Type) 6.9539 ------- #8-32 x 3/8˝ FLAT HD. SOCKET SCREW .3540 B8179 SUPPORT BAR – 2-13/16˝ 22.50

40A B10612 SUPPORT BAR – 1-7/16˝ (Air Type) 22.5041 B7951 PRESSURE FOOT STOP 22.5042 B2843A THUMB SCREW 2.9543 B2507 PRESSURE FOOT BLOCK 19.7544 ------- #8-32 x 7/8˝ SOCKET HD. SCREW .3545 B7167 PRESSURE FOOT 28.50

45A B10176 PRESSURE FOOT (Air Type) 30.0046 ------- 1/4-20 x 1/4˝ SOCKET HEAD SET SCREW .3547 B7038 PRESSURE FOOT ROD – 11-1/8˝ 8.0048 B1044 PRESSURE FOOT SPRING – 7-11/16˝ 6.9549 B10196 SHIELD 7.9550 ------- #8-32 x 1/2˝ SOCKET HD. SCREW .3551 B11658 AIR FITTING 4.5052 B10104 SPINDLE LOCK NUT 13.5053 B4293 GREASE FITTING (Press Type) 3.75

53A B1922 GREASE FITTING (Screw Type) 3.75---- B7500 DRILL HEAD GREASE – 1 QT. (Not Shown) 16.00

Try Our COMPLETE DRILL HEAD REBUILD KIT $350.00 ( • Items indicated above are included in typical kit for newer “Vise Grip style” heads)

••••

•

•

•

•

•

•

••

•

•

•

*Parts being supplied are Non-OEM.Lawson is a registered trademark.

Special HeadAssemblyfor 9/16˝Diameter Holes

Complete HeadAssemblyfor Holes from1/8˝ to 1/2˝Diameter$845.00

$1100.00

2˝ HEAD

3˝ HEADCOMMON PARTSOurLowerPrices

Punch Holesin the

Competition!

© Cutter & Drill Parts LLC. 2007Lawson is a registered trademark.

Note: L.H. Head is shown.To determine L.H. from R.H., note sidethat the Gib Screw (Item #31) is on.

44

4545A

4649

50

4342

41

3838A

3737A

4040A

39

353651

99A9B9C9D9E9F

66A6B6C6D6E

11

52

8

77A

1414A

13

1215

16

17

1819

2020A

17

2

13

4

5

28

27

29

2424A

2223

2625

2121A

34A

32

3310

34

5353A

3030A

3143

44

41

43

44

46

45

47

48

42

© Cutter & Drill Parts LLC. 2007Lawson is a registered trademark.

*Quality AftermarketParts For: LAWSON - 3/4˝ CENTER TO CENTER 2-SPINDLE DRILL HEADS


Try Our COMPLETE DRILL HEAD REBUILD KITS $975.00 ( • Items indicated above included in typical 3/4˝ center to center kit) (1˝ or 3/4˝ Center to Center kits available)


Ref. CD Part Description Qty. Price26 B3585A SPINDLE - LONG 1 $ 168.5027 B7286A LOWER BUSHING 2 48.0028 ------- #4-40 x 3/8˝ FLAT HD. MACHINE SCR. 4 .3529 B1009 SPRING CLIP 2 3.7530 B7461 GREASE WICKING (Per Foot) – 7.5031 B2841 PLUG WITH GASKET 2 1.0032 ------- 5/16-24 x 1/4˝ SOCKET SET SCREW 2 .3533 B8110A ADJUSTING SCREW 2 11.7534 B7283A ADJUSTING KNOB 2 36.5035 ------- 1/4-20 x 2-3/4˝ GIB SCREW 2 2.5036 B7325A PRESSURE FOOT 1 56.0037 ------- 1/4-20 x 1/4˝ SOCKET SET SCREW 2 .3538 ------- #8-32 x 7/8˝ SOCKET HD. CAP SCR. 4 or 8 .3539 B2507A PRESSURE FOOT BLOCK 2 19.7540 B2843A THUMB SCREW 2 2.9541 B7951A PRESSURE FT. STOP 2 22.5042 B7038A PRES. FT. ROD 11-1/8˝ (2˝ cap.) 2 8.00

42A B7940 PRES. FT. ROD 14˝ (3˝ cap.) 2 8.7543 B1044 PRES. FT. SPRING 7-11/16˝ (2˝ cap.) 2 6.95

43A B7947 PRES. FT. SPRING 10-9/16˝ (3˝ cap.) 2 6.9544 B8180 UPPER BLOCK 2 19.7545 ------- #8-32 x 1/2˝ SOCKET HD. CAP SCR. 4 .3546 ------- #8-32 x 3/8˝ FLAT HD. SOCKET SCR. 4 .3547 B8179 EXTENSION PLATE 2 22.50

••••••

••••

•••••••••

••

Ref. CD Part Description Qty. Price1 ------- #10-24 x 7/8˝ FLAT HD. SOCKET SCR. 4 $ .352 B7284A BEARING RETAINER 1 86.003 B7307 THRUST BEARING 1 38.504 B7310A BEVEL GEAR 1 77.855 B7326A BUSHING 1 148.006 ------- #6-32 x 1/2˝ FLAT HD. MACHINE SCR. 4 .357 B4305A PLUG 2 9.508 B7327A GIB 1 38.509 ------- #10-24 x 1/4˝ SOCKET SET SCREW 2 .35

10 ------- #10-24 x 1/2˝ SOCKET SET SCREW 2 .3511 ------- 1/4-20 x 1/4˝ SOCKET SET SCREW 2 .3512 ------- 1/4-20 x 1/2˝ HALF DOG PT. SET SCR. 2 .3513 B6253A COMBINATION BEVEL/SPUR GEAR 1 162.5014 B6250A SPUR GEAR 1 78.5015 B7330A BRONZE THRUST WASHER 2 4.5016 B7579A UPPER SPINDLE BUSHING 2 48.5017 B3587A SPINDLE COLLAR 2 13.2518 ------- SPRING PIN - 1/16˝ x 5/8˝ 2 1.6519 B3588 THRUST BEARING 2 18.5020 B3594A 1/16˝ STEEL BALL 2 .5021 B3593A SPRING 2 3.8522 B7282A ADJUSTING SLEEVE - SHORT 1 42.0023 B7281A ADJUSTING SLEEVE - LONG 1 46.0024 B1289 THRUST BEARING 2 18.5025 B3586B SPINDLE - SHORT (w/Spool Shank) 1 168.50

Complete HeadAssemblies:3/4˝ Center to Centeror 1˝ Center to Center

$2100.00

• Please verify spindle center to centerdistance when ordering.

• Parts for 3/4˝ center to center heads shown.

• Parts for 1˝ centers are also available.

• Note: L.H. Head is shown. To determineL.H. from R.H., note side that the GibScrew (Item #35) is on.

At Cutter & Drill, Multiple Spindle Drill Heads Are Our Specialty!


LAWSON STYLE MULTIPLE SPINDLE DRILL HEADS

Cutter & Drill manufactures a wide variety of drillheads for most applications. See our diagrams forthe common hole patterns.

For custom hole patterns, please call us for a freeconsultation.

Note: An easy way to determine L.H. Heads from R.H. Heads is to note which side the Gib Screwis on. Example: If the Gib Screw is on the left, it is a Left Hand Head.

Other Patterns Also Available.

3/4˝ 3/4˝ 1˝ 1˝1˝ 1˝

Classic 7 Spindle Hole Pattern

Center to Center Distances Between Holes

2-1/4˝ 1˝ 1˝

Monarch 7 Spindle Hole Pattern

Center to Center Distances Between Holes1˝1˝ 2-1/4˝

5/8˝ 5/8˝1-3/8˝ 1-3/8˝A A

L.H.Drill DrillDrill Drill

R.H.

SPECIAL (2) SPINDLE DRILL HEADS“A” DIM. = 3/4˝ OR 1˝

MULTIPLE SPINDLEHOUSING DIMENSIONS

STANDARD 1-1/2˝ LAWSON DRILL HEAD

DrillDrill

5/8˝ 5/8˝7/8˝ 7/8˝

R.H.L.H.

SINGLE SPINDLEHOUSING DIMENSIONS

SPECIAL 1-3/8˝ WIDE DRILL HEAD

DrillDrill

5/8˝ 5/8˝3/4˝ 3/4˝

R.H.L.H.

1-3/8˝ A 5/8˝A 1-3/8˝A5/8˝ A

Drill

SPECIAL (3) SPINDLE DRILL HEADS“A” DIM. = 3/4˝ OR 1˝

L.H. R.H.Drill Drill DrillDrill Drill

7 Spindle Drill1 Pass Drilling

Single Spindle(See Housing Dimensions Below)

Multiple Spindle(See Housing Dimensions Below)

• Special Centers

• Advanced HeadLubrication

• Designed toDissipate Heat

• Drill Bit SprayLubricationand Air CoolingAvailable

• Easy to Service

• Reasonably Priced

• Custom Built toYour Order

Back View

Specifications for Hole SpacingEach of the diagrams at the right depict the fixedhousing dimensions of either left or right handdrill heads.

By utilizing these specifications you can determinethe minimum possible distance between outsideholes when various housings are placed directlyagainst each other.

Minimum center to center distance using a rightand left hand drill is 1-1/4˝. Multiple spindleheads will drill 3/4˝center to center. Indexing isnecessary for closer holes.

Use these guidelines to determine the combinationof heads that best suits your application.

CLCL CL CLCL CL

CLCLCLCLCLCLCL CL

LAWSON DRILLING MACHINES*Quality Aftermarket

Parts For:

Frequently Replaced Parts for Lawson Machinery and Drill Heads

B11092A

A3039A B10104B1009

BACK GAUGE SLIDER BLOCKSCD Part Description Price

A1720 Slider Assembly $ 69.50B7754 Slider Clamp Only 26.00

15Call Cutter & Drill - For High Quality *Non-OEM Replacement Parts


B

D

A

EBELTS C

A

B

C

D

E

G

F

A

B

LEFT HAND DRIVE SHAFT PARTS

GF H

A B C ED

RIGHT HAND DRIVE SHAFT PARTS

H

KI LJ

Fassembly

A B C

E

D

REDUCER CRANK & PINRef. CD Part Description Price

A B7915 Reducer Crank $ 279.50B B5908 Crank Pin (Models A & B) 55.00B B10766 Crank Pin (Classic DELX) 65.00

HEAD RAIL ADJUSTMENT PARTSRef. CD Part Description Price

A B4609 Adj. Screw (Models A & B) $ 89.00A B10694 Adj. Screw (Classic DELX) 95.00B B5901 Adj. Nut (Models A & B) 269.50B B10695 Adj. Nut (Classic DELX) 285.00C B3814 Key 2.80D B7501 Thrust Bearing 4.00E B7796 Thrust Bearing 6.00F 12574 Lock Screw (H305635) 6.95G B3813 Brass Plug 3.00

CLASSIC SHUTTLE PUSHER PARTSRef. CD Part Description Price

A C9098 Spring $ 4.75B C9074 Clevis Pin 1.50C C10683 Paddle 55.00D C10682 Pusher Yoke 72.50E 11476 T-Nut 14.50F C10710 Pusher Assembly 148.50

VARIABLE SPEED PULLEYSRef. CD Part Description Machine Price

A B7129 Adjustable Pulley (Drive Motor) A, B, C, DELX $ 945.00B B7102 Vari-Pulley (Drive Shaft) A, B, C, DELX 895.00C B6581 Adj. Pulley (Stroke Motor 5/8˝ Bore) A, B 248.00C B8471 Adj. Pulley (Stroke Motor 7/8˝ Bore) A, B, C, DELX 248.00D B6582 Vari-Pulley (Reducer 7/8˝ Bore) A, B, C 285.00D B6582A Vari-Pulley (Reducer 1˝ Bore) A, B, C 285.00D B10066 Vari-Pulley (Reducer 3/4˝ Bore) Classic DELX 289.00E B6926 Vari-Speed Belt (RPM) A, B, C, DELX 95.00

B6580 V-Belt (Stroke Cycle Speed) A, B, C 18.00B10067 V-Belt (Stroke Cycle Speed) Classic DELX 18.00

COMMON DRILL HEAD PARTSCD Part Description Price

B11092A Collet Wrench $ 32.50B1009 Drill Spindle Clip 3.75B10104 Vise Grip Spindle Nut 13.50A3039A Collet Assembly 26.50

HEAD RAIL DRIVE SHAFTS & PARTSRef. CD Part Description Price

A LH107462 Bearing (Old #3262) $ 72.50B B2649A Spacer - Models A & B 39.50B B9900 Spacer - Classic DELX 4.00C LH103832 Bearing (Old #1352 & 3261) 16.95D 1156 Lock Washer (Old #3276) 1.20E 956 Lock Nut (Old #3275) 2.50F B2651A Sleeve - 4-3/4˝ Fixed Speed Drive 195.00F B7128A Sleeve - 5-7/8˝ Vari-Speed Drive 245.00F B10675 Sleeve - 5-7/16˝ Sq. Hole (Classic) 180.00G B2821 Special Key 18.50H A2652A Drive Shaft 34-5/8˝ (Model A) 195.00H B3426A Drive Shaft 27-5/8˝ (Model B) 185.00H A10676 Drive Shaft - Square End (Classic) 225.00I H280117 Snap Ring 1.25J LH105131 Bearing (Old #3263) 55.00K B7107A Locking Sleeve - Models A & B 125.00K C9976 Locking Sleeve - Classic DELX 135.00L B2642A Knob 45.00

CHALLENGE DRILL HEADS*Quality AftermarketParts For:


Challenge is a registered trademark of the Challenge Machinery Company.

4687

K-85

CHALLENGE ACCESSORIESOEM Ref. Description Price

4687 Drill Drift $ 11.30K-85 Drift Hole Cover 7.20

CHALLENGE DRIVE BELTSOEM Ref. Description Price

S-1661-1 EH3A $ 72.3445034 MS-5 Before S/N 75237 133.3045160 MS-5 After S/N 75237 117.00

12

3

36

38

5

4

37

35

32

33

34

31

30

29

28

27

23

24

25

26

22

21

7

6

10

9

8

12

20

14

15

13

12

11

16

17

18

19

A6594-6 COMPLETEHEAD ASSEMBLY

$895.00The Head Assembly is a

Challenge OEM Part.

Ref. OEM Ref. Description Price1 6598-2 GEAR COVER $ 43.002 S-1722 HELICAL GEAR (Replace in Pairs With #17) 89.703 6597 SPACER 48.164 6606-3 BLOCK BUSHING 35.005 --------- 1/4-20 x 3/4˝ SOCKET HD. CAP SCREW .356 S-1725 ALEMITE FITTING .907 6602-2 ADJUSTING KNOB 39.808 --------- #6-32 x 1/4˝ ROUND HD. MACHINE SCREW .359 --------- 1/4-20 HEX HEAVY JAM NUT .3510 --------- 1/4-20 THIN HEIGHT LOCK NUT .5011 S-1742 THRUST BEARING (OILITE) 1.0012 A-6600-4 SPINDLE SHIM 14.8713 6603-2 ADJUSTING BUSHING 128.5914 S-1720 BUSHING - BRONZE 1.3015 S-1723 THRUST BEARING 44.5016 6599 SPINDLE SPACER 11.3017 S-1721 SPINDLE GEAR (Replace in Pairs With #2) 51.5018 S-1719 BUSHING - BRONZE 8.0019 6596-3 SPINDLE 129.5020 --------- 1/2˝ x 1/8˝ WOODRUFF KEY .50

••

•

••

••

••••

• Try Our COMPLETE DRILL HEAD REBUILD KIT - Part #CHDH Kit $385.00(Items indicated above with dots • are included in the kit )

Ref. OEM Ref. Description Price21 --------- 3/8-16 x 1-1/2˝ SOCKET HD. CAP SCREW $ .8522 --------- 3/8˝ MEDIUM LOCK WASHER .1523 6601 CLAMP 10.4024 --------- 1/2-13 x 1/2˝ SET SCREW - NYLOCK 1.3025 S-1255-1 SPRING .9026 6609 PLUNGER - TEFLON 1.8027 6595 HOUSING 420.0028 K-85 DRIFT HOLE COVER 7.2029 6605 PRESSURE FOOT 48.4530 --------- #10-24 x 1/4˝ CUP PT. SOCKET SET SCREW .3531 6604 PRESSURE FOOT BAR – 2˝ HEAD 119.27

6604-4 PRESSURE FOOT BAR – 2-1/2˝ HEAD 86.2532 --------- 1/8˝ x 3/8˝ DOWEL PIN .5033 S-1725 ALEMITE FITTING .9034 --------- #10-24 x 3/8˝ BUTTON HD. SOCKET CAP SCREW .3535 6608 POINTER 13.0536 6607 COVER - PRESSURE FOOT 14.9037 S-1724-2 SPRING - PRESSURE FOOT (Inner) 1.50

S-1724-3 SPRING - PRESSURE FOOT (Outer) 1.6038 --------- #8-32 x 1/4˝ BUTTON HD. SOCKET CAP SCREW .35•

COMPLETE HEAD ASSEMBLY (OEM) - Part #A6594-6 $895.00

© Cutter & Drill Parts LLC. 2007Nygren-Dahly is a registered trademark. 22

26

40

39

38

37

34

35

36

33

3231

1

67

5

3

4

2

8

9

11

13

12

1617

18

21

2019

24

23

2525A

27

30

28

29

14

15

Try Our COMPLETE DRILL HEAD REBUILD KIT - Part #NDDH Kit $350.00(Items indicated above with dots • are included in the kit )

Ref. OEM Ref. Description Price1 NDNS-108A DRILL FRAME CLAMP LEVER $ 13.502 --------- SPRING PIN 1/8˝ x 3/4˝ .353 NDNS-107 DRILL FRAME CLAMP SCREW 39.954 NDNS-105A DRILL FRAME CAP 35.955 NDNS-106A CLAMP - DRILL SPINDLE - (Old Style) N/A6 --------- 5/16-18 x 1˝ SOCKET SET SCREW .357 --------- 5/16-18 x 1/4˝ SOCKET SET SCREW .358 ND-24994 UPPER BUSHING 5.509 NDNS-016B DRILL HEAD FRAME 360.0010 ND-21996 GREASE FITTING 3.5011 NDNS-3310 DRIVE GEAR WASHER 19.5012 NDNS-119 HELICAL GEAR - (Replace in Pairs with #37) 69.0013 NDNS-100 GEAR KEY 7.5014 NDNS-103A DRILL GEAR CAP 21.5015 --------- #6-32 x 3/8˝ FLAT HD. MACHINE SCREW .3516 NDNS-111B ND DRILL HEAD SIDE PLATE 12.9517 --------- #8-32 x 1/4˝ FLAT HD. MACHINE SCREW .3518 ND-24995 LOWER BUSHING 6.5019 --------- SPRING PIN 1/8˝ x 3/4˝ .3520 NDNS-115B SQUARE ROD - STRIPPER FOOT 12.5021 NDNS-025 STRIPPER FOOT 27.5022 --------- #10-32 x 1/2˝ SOCKET HEAD CAP SCREW .6523 NDNS-118B SPRING - STRIPPER FOOT 12.5024 --------- #6-32 x 3/8˝ ROUND HD. MACHINE SCREW .35

•

•

•

•

•

10

NYGREN-DAHLY DRILL HEADS*Quality AftermarketParts For:


1.25˝ CTR. to CTR. HORSESHOEOEM Ref. Description Price

NDRC-73 Bit Retainer Assembly $ 34.00NDRC-73A Clip 17.00NDRC-73B Retainer Ring 17.00NDRC-73C O-Ring .75

NEW STYLE ADJUSTINGKNOB ASSEMBLY

41 4746

4544

42

43

NS-073A ND-30338

Drill Extensions

NYGREN-DAHLY ACCESSORIESOEM Ref. Description Price

NS-073A Horseshoe Clamp $ 17.00ND-30338 Retaining Spring 36.00NDEXT* Drill Extensions: 11.75(Specify size) 1/8˝, 3/16˝, 1/4˝, 5/16˝

New Style Round HorseshoeFor Closer Centers

#NDDH - COMPLETEHEAD ASSEMBLY

$650.00

Ref. OEM Ref. Description Price25 NDNDB-0521 FRONT END PLATE (New Style) $ 17.50

25A NDNS-49493 FRONT END PLATE WITH NOTCH (Old Style) 17.5026 --------- #10-32 x 3/4˝ ROUND HD. MACH. SCREW (Brass) .6527 --------- #10-32 JAM NUT .3528 NDNS-102B CLAMP LEVER 19.5029 --------- #6-32 x 3/8˝ ROUND HD. MACHINE SCREW .3530 NDNS-109A ND DRILL SPINDLE CAP - (Old Style) 20.9531 --------- 1/4-20 JAM NUT .3532 --------- FLAT WASHER 1/4˝ ID x 1/2˝ OD .1533 ND-24996 THRUST WASHER (Hardened) 8.7534 NDNS-023A SPINDLE SLEEVE - NON THREADED - (Old Style) 29.0035 NDNS-121 SPINDLE THRUST BEARING 39.0036 NDNS-104 SPACER COLLAR 7.9537 NDNS-120 SPINDLE GEAR - (Replace in Pairs with #12) 49.5038 ND-24997 SPRING PIN 1/8˝ x 3/4˝ .3539 NDNCS-110AA DRILL HEAD SPINDLE 125.0040 NDNS-073A HORSESHOE CLAMP 17.0041 --------- 1/4-20 x 3/4˝ SOCKET HD. CAP SCREW .6542 NDNS-023B SPINDLE SLEEVE - THREADED - (New Style) 29.0043 --------- 1/4-20 x 3/8˝ SET SCREW .3544 NDNDB-0145 BRASS OR PHENOLIC PLUG .8545 NDNS-106B CLAMP - DRILL SPINDLE - (New Style) 35.5046 --------- #6-32 x 1/4˝ FLAT HD. MACHINE SCREW .3547 NDNS-109B ND DRILL SPINDLE CAP - (New Style) 20.95

••

•••

•••••

•

•

COMPLETE HEAD ASSEMBLY - Part #NDDH $650.00

Simplicity with PrecisionA long standing tradition with Baum floor model drills is how easilythe adjustments can be made. No tools are needed for positioningthe heads. Set-up time is greatly reduced since the heads can bemoved into position simply by loosening a locking knob by hand,placing the head where needed, and retightening. Drill bits can alsobe inserted and removed without tools.

The drill bits are forced into the paper using hydraulic, rather thanmuscle power, so drilling is nearly effortless. The hydraulicallypowered head assembly is spring loaded so that if the operatorremoves his foot from the pedal, or in the event of a power outage,the head assembly will return safely to its starting position.

Built for SafetyThe safety interlock feature protects the operator by disabling allmotors when the guard is lifted. The spindle motor remainsinoperative until the guard is lowered.

If the safety motor overload breakers interrupt the operation ofeither the spindle or the hydraulic motors, there is no need to openthe electrical box to push or reset switches. They will automaticallyreset themselves. An overload indicator light is provided on thecontrol panel.

• Three Head Drilling With Full 2˝ Drilling Capacity• Optional Movable Table Eliminates Shifting of Paper• Hydraulic Operation• Heavy-Duty Design for Durability• Safety Guarding• All Drill Heads are Movable Without Tools• Optional Adjustable Stops for Special Drilling Patterns• Flexible Back Gauge Adjustments• Easy Drill Bit Installation and Removal Without Tools• Three Year Warranty

ThreeYear

Warranty!


BAUM D3 - Three Hole Drilling at an Affordable Price

Designed to increase productivity, the Baum D3 Floor ModelPaper Drill features sturdy construction, easy adjustments,and is hydraulically powered for effortless operation.

Optional Movable TableEliminates Shifting of Paper

During Step Drilling!

Freight Not Included

Stationary Table

Movable Table

$ 7,295.00$ 7,595.00

MACHINERY DRILLING

SPECIFICATIONSDrill Head Operation: HydraulicMaximum Drilling Capacity:* 2˝Drill Sizes Available: (12 sizes) 1/8˝ - 1/2˝Minimum Distance Between Holes:- Without Adj. Stops (Table in Fixed Position) - 2˝Maximum Distance Between Holes:- With Table in Fixed Position - 11˝- With Table Shifted - 25-1/4˝Vertical Drill Bit Height Adjustment: 1/4˝Adjustable Range:- Drill to Back Gauge - 0 - 5-3/4˝Height: 66˝Table Height from Floor: 40˝Table Size: 29˝ W x 22-3/4˝ DSpace Needed for Drill: 31-1/4˝ W x 40˝ DShipping Weight: (Class 85) 850 lbs.Electrical: 208V - 230V, 1-PhaseOperating Amperage: 26 ampsSpindle Drive Motor: 1hpPump Drive Motor: 1hp* Smaller diameter drill bits will do lifts 1˝ to 1-3/4˝ depending on drill bit size.

Comes Standard With:Hand Drill Bit SharpenerThree 5/16˝ Hollow Drill BitsThree Drill Bit ExtensionsThree Horseshoes for Drill BitsFour Wood Drilling BlocksTwo Lubricant SticksIndia StoneTool Kit

• Takes up to Five 2˝ Capacity Drilling Heads• Optional Movable Table Eliminates Shifting of Paper• Positive Gear Driven Heads• Hydraulic Operation• Safety Interlock Guards• Waste Disposal• All Drill Heads are Movable Without Tools• Flexible Back Gauge Adjustments• Easy Drill Bit Installation and Removal Without Tools• Three Year Warranty

World Famous Drill HeadsThe most famous aspect of Baum drills is their heads. Easyto position and secure, their build quality has made them oneof the most reliable pieces of equipment in the bindery. Themachined dovetail design provides truer drill alignment forperfectly vertical holes. Belt slippage and wear are eliminatedbecause the heads are gear driven.

Movable Table AvailableBy drilling in multiple steps, the movable table option allowsyou to efficiently increase the number of holes drilled. It alsoincreases the maximum center to center distance of theheads to 23.13 inches, and reduces the minimum distance to.38˝ using adjustable stops. The table easily moves from leftto right and back again with no paper shifting. Spring tensionmaintains the position for drilling.

Built for SafetyThe D5 incorporates the same interlocking guards and safetyfeatures as the D3 - described on previous page.

Comes Standard With:Three Drilling Heads with 5/16˝ BitsHand Drill Bit SharpenerThree Drill Bit ExtensionsThree Horseshoes for Drill BitsFour Wood Drilling BlocksTwo Lubricant SticksSharpening StoneOpen End WrenchAllen Wrench - 1/8˝

ThreeYear

Warranty!

You can do a wide varietyof drilling with the D5 :• Automotive• Catalog• Medical Forms• Three Hole Standard• Calendars and Planners

BAUM D5 - Unmatched Versatility with 5 Head Drilling CapacityMade for binderies where production and durability really count!With unquestioned reliability and quick set up, the Baum D5punches holes in the competition!

Optional Movable TableEliminates Shifting of Paper

During Step Drilling!

Freight Not Included

Model D5-ST 220V, 3-phase ------ $ 8,595.00Model D5-ST 220V, 1-phase ------ $ 8,595.00Model D5-MT 220V, 3-phase ----- $ 10,295.00Note: ST= Stationary TableMT= Movable Table

Additional Drill Heads (OEM) $745.00 Each

MACHINERY DRILLING


SPECIFICATIONSD5-ST D5-MT

Maximum Number of Heads:* 5 5Maximum Drilling Capacity:** 2˝ 2˝Drill Sizes Available: (12 sizes) 1/8˝ - 1/2˝ 1/8˝ - 1/2˝Max. Distance Between Head Centers: 10˝ 23.13˝ by step drillingMin. Distance Between Head Centers: 1.25˝ 1.25˝Min. Distance Between Holes: 1.25˝- With Adjustable Stops - (Table is Fixed) .38˝ by step drillingAdjustable Range:- Drill to Back Gauge - 0 - 5-3/4˝ 0 - 5-3/4˝Height: 75˝ 75˝Table Height from Floor: 39-1/2˝ 39-1/2˝Table Size: 26˝ W x 22˝ D 26˝ W x 22˝ DSpace Needed for Drill: 26˝ W x 36˝ D 49-1/2˝ W x 36˝ DShipping Weight: (Class 85) 850 lbs. 870 lbs.Electrical: (Single Phase Optional) 220V, 3-Phase 220V, 3-PhaseOperating Amperage: 10.3A, 3-Phase 10.3A, 3-PhaseSpindle Drive Motor: 2hp 2hpPump Drive Motor: 1hp 1hp

* Maximum Machine Drilling Capability: Five 1/4˝ holes or Four 3/8˝ holes or Three 1/2˝ holes.** Smaller diameter drill bits will do lifts 1˝ to 1-3/4˝ high depending on drill bit size.

TOLL FREE: (800) 443-5416LOCAL: (203) 483-0876FAX: (203) 483-0224

© Cutter & Drill Parts LLC. 2009

CUTTER & DRILL PARTS, LLC31 Ciro RoadNorth Branford, CT 06471

PRSRT STDU.S. POSTAGE

PAIDBPS, INC.

CUTTER & DRILL PARTS, LLC

Documents

CUTTER & DRILL PARTS, LLC