Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
CUT-UP SYSTEMS
L E A D I N G T E C H N O L O G Y I N F R A M E A N D F L E X I B L E C U T-U P S O L U T I O N S
Foodmate provides solutions to meet the widest range of products specifications and cutting requirements, meeting the highest standards set by retailers, fast food companies and institutional organizations from around the world.
Foodmate Cut-up Systems “THE LINES JUST RUN!” Robert Garlington, VP of Operations, George’s Inc.
FLEXIBLE AND FRAME CUT-UP SOLUTIONSLeading Technology in Cut-up Solutions
Catered to our clients’ specific needs, solutions range from a
self-contained frame type cut-up system, to sophisticated
computer and vision camera controlled flexible cut-up
systems that can deliver product to any desired location
inside your cut-up area. Foodmate provides solutions to
meet the widest range of products specifications and
cutting requirements, meeting the highest standards set by
retailers, fast food companies and institutional organizations
from around the world.
OF
CC
FS
OPTI FLOW Cut-up System (flexible)
Compact Cut-up System (frame)
Food Service Cut-up System (frame)
OF
FLEXIBLE CUT-UP OPTI FLOW CUT-UP SYSTEM
Foodmate OPTI Flow Cut-up System is one of the market’s
most advanced cut-up systems, offering excellent efficiency
and flexibility. The OPTI Flow combines the advantage of
the optimal solution for whole bird distribution based on
grade and weight as well as the optimal logistics solution
to deliver chicken parts to any desired location inside the
plant.
The system can be controlled by advanced ChickSort
weighing and InVision Grading Software to help optimize
bird utilization based on weight and grade throughout
the process effectively, by increasing A grade pack out and
increasing yield value throughout the entire process. The
lines can be configured with bypassable bird unloaders
and bypassable cut-up modules.
Modules can be customized according to your plants’
requirements. The system is able to handle all basic cuts,
such as wings, breast, whole legs and drum and thighs
with a speed of up to 105 birds per minute on 12” centers
and up to 130 birds per minute on 10” centers, depending
on product mix and bird size.
Foodmate OPTI Flow is a flexible cut-up systems, designed
to keep maintenance and sanitation to a minimum
without compromising performance and quality. One of
the unique features is the self correcting magnetic cut-up
shackle which prevents shackles from miss-feeding into
the cutting modules.
Because chicken appreciates a clean cut!
OPTI FLOW Cut-up System
Foodmate was commissioned to deliver the largest cut-up project in the U.S. in 2016.
Six OPTI FLOW Lines | Client on the West Coast, U.S.
OF
FLEXIBLE Cut-up System
COMPACT CUT-UP SYSTEMS
Final Product | 9-piece food service cuts
CC
Food Service Cut-up Systems are designed to meet all 8 and 9-piece cutting requirements set by various
fast food chains such as KFC, Popeyes, Church’s Chicken and Bojangles’. This system can also be designed
and customized to meet other food service cut-up requirements from different countries around the
world, such as Korea (25-piece) and Thailand. Foodmate has also supplied lines to make 4 and 6-piece
bone-in breast cuts as well as 3-piece thigh cuts for school lunch programs in the U.S.
FOOD SERVICE CUT-UP SYSTEMS FS
FRAME Cut-up Systems
FRAME CUT-UP SYSTEMS
Frame Cut-up Systems are characterized by its self-contained structure with cutting modules and is delivered pre-
wired with a control panel that is already mounted to the machine. Frame Cut-up Systems are easy to install and
only requires one power connection. The inline design easily lends itself to connect automatic transfer machines,
which are often supplied by distribution lines for optimal cutting results and eliminates the manual hanging process.
All Frame Cut-up Systems are supplied with self-correcting magnetic cut-up shackles to help prevent the shackles
from miss-feeding when entering the cut-up modules. The unique turning point and side plate configuration makes
the machine easy to clean and flexible for future line modifications. The stand-alone system requires minimal
installation time because all the single point connections are integrated into the modules/machines. Frame Cut-up
Systems can be used for Food Service applications and for traditional cut-up applications.
Foodmate Compact Cut-up Systems are available in different configurations, designed to meet mainly
traditional product mixes. Some systems are as simple as just cutting front halves and cutting leg quarters,
while others may include wing segmenting, options such as weighing and whole bird distribution. Line
speeds can vary from 100 birds per minute on 12” centers to 140 birds per minute on 8” centers depending
on the type of cuts. This system allows for a maximum of 100 birds per minute, depending on product mix.
wingsWing with or without scapula meat
MID WING CUTTER
The Foodmate Mid Wing Cutter was designed to separate
the mid wing piece (flapper/median) from the wing
drummette, also known as the first joint piece. The
machine cuts through the center joint of the chicken
wings and can be used on chickens with or without the
wingtips.
WING CUTTER AFS
The Wing Cutter AFS (all food service) is designed to meet the
latest requirements for major fast food chicken restaurants.
The machine is capable of cutting both new requirements and
traditional Silver Dollar style with just a minimum adjustment.
The Wing Cutter AFS can be installed into a new or existing
Food Service Cut-up line.
WING TIP CUTTER
The Foodmate Wing Tip Cutter cuts the tip from
the mid-wing piece. The machine is developed to
accommodate common bird sizes and gives an
optimal yield on wing meat, while ensuring high
cutting accuracy. The Wing Tip Cutter can be
installed on current figurations or newly constructed
Frame and Flex Cut-up lines.
OF CC
OF CC
FS
WING CUTTER SUPER CUT
Foodmate developed a new high yield wing cutter to better handle large birds, birds with a missing wing,
and damaged birds. The machine has a very open design to allow birds with one wing, or damaged birds to
easily pass through the machine without clogging the machine and stopping the line. The machine creates
an anatomical cut with the option to optimize wing yield by leaving the back meat on the wing.
While designing the machine, a lot of focus was put on making the machine easily adjustable; which resulted
in the ability to move the blades in or out for optimal yield and cutting results. An electric height adjustment
is a standard feature on this machine. Customers that do not have a Foodmate cut-up system can also benefit
from this machine since it can easily be installed on existing lines.
OF CC
9 Optional bypass
9 Consistent and anatomical cuts
9 Accommodates birds with one wing
9 Suitable for big and small birds
9 Leaves minimum breast meat and maximum back meat
9 Handles damaged birds without clogging the machine and stopping line
FINAL PRODUCTS
AD
VA
NTA
GE
S
CUT-UP MODULES
Our mission is to innovate, automate and bring cost-effective solutions to the industry.
Pantone 376
Pantone 298
70% blackThe Foodmate Halving Machine separates the front half from the chicken. The machine also can be used to cut off the remaining backbone piece after using the FM Front
Piece Cutter. It requires minimal maintenance and is easy to clean. The Halving Machine can be installed on current figurations or newly constructed Frame and Flex Lines.
HALVING MACHINE
The Foodmate Breast Processor is designed to produce split breast or
whole breast with or without back. The machine has unique design
features that allows for accurate cuts and minimizes the chances of
birds clogging the machine.
BREAST PROCESSOR OF CC
FH CROSS-CUT HALVING MACHINE WITH BYPASS
This module addresses challenges commonly found with
single bladed front halving machines. The FH Cross-Cut
Halving Machine provides a highly efficient cross-cut front
half, significantly reducing the amount of tipped keels and
miscuts. Using two blades instead of one large blade gives
a straighter cut across the hips and gives more control over
the number of ribs that stay attached to the front half.
The FH Cross-Cut can run both on 12” and 8” centers, and
it can process a large size variation without adjustment.
Its versatility allows for installation on current line
configurations or newly constructed frame or flexible cut-
up lines.
With the FH Cross-Cut Halving Machine, there is no need
for a pre-cutter, in addition, the machine has a direct drive
design with no belts and easy maintenance.
OF CC
SINGLE BLADE HALVING MACHINE
This module separates the front half from the chicken. The machine also can
be used to cut off the remaining backbone piece after using the Front Piece
Cutter. It requires minimal maintenance and is easy to clean. The Single
Blade Halving Machine can be installed on current configurations or newly
constructed frame and flexible lines.
OF CC
breastsBREAST CAP CUTTER
The Breast Cap Cutter separates the breast cap
from the back piece. The machine gives an
optimal result with a minimum loss of breast
meat and can be easily adjusted to various
bird sizes. The height of the machine can be
adjusted to bird sizes by rotating the spindle.
OF CC
CUT-UP MODULES
legs
LEG PROCESSOR (OPTI AND SII)High Performance | Consistently Optimum Yields
HIGH FLEXIBILITY
The OPTI Leg Processor can accommodate a wide size range while maintaining a high percentage of “white knuckles”
and minimal bone content with minimal adjustments. The machine can be adjusted to accommodate the so called “big
birds” or large chickens, and it can run up to 105 BPM. In addition, final product is consistent, with good meat and skin
presentation. The OPTI Leg Processor delivers improved cut quality and yield performance as a standalone machine or
when supplying product to the Foodmate Dark Meat Deboning System. OF CC
9 Low bone content
9 High yield performance
9 High percentage of “white knuckles”
9 Very heavy duty and durable design
9 User-friendly, requiring only minor adjustments
9 Increases flexibility by accommodating a wide size range
Foodmate has developed the two types of Leg Processors to maximize bone-in and boneless dark
meat yields. The machines give a high yield anatomical cut and good meat and skin presentation. Both
have user-friendly design and provide low maintenance cost, as they have no springs or air cylinders. In
addition, height is easily adjustable, which simplifies the process of accommodating different bird sizes.
The OPTI Leg Processor was developed in the U.S., and though initially designed to address specific
demands of the U.S. market, this new version has proven to bring overall greater performance, benefiting
costumers around the world. The SII type is suitable for smaller bird sizes, more suitable for Canadian and
European markets Both Leg Processors can be installed in either a new Foodmate Cut-up System or it
can easily be integrated into existing frame or flex type cut-up system.
AD
VA
NTA
GE
S
Final Product The leg processor accommodates a wide size range while maintaining a high percentage of “white knuckles” and minimal bone content.
CUT-UP MODULES
The New Generation (NG) Thigh and Drumstick Cutter is a multi-
purpose machine that can be used for both retail and food service
applications. Specially designed to handle large size variations while
ensuring the highest percentage of anatomical cuts. It has a simple
construction design that contains no rebuild points, thus reducing
the cost of ownership. It provides an anatomic cut and depending on
the type of cut, various configurations are possible. The electrical sync
allows for more accurate cutting and the absence of a 90 degree gear
box lowers maintenance costs.
Our mission is to innovate, automate and bring cost-effective solutions to the industry.
Pantone 376
Pantone 298
70% blackThe Foodmate Saddle Cutter is the optimal machine to separate leg quarters. The guiding system is designed to always give an accurate center split. The chicken which is hanging on the Foodmate Cut-Up Line is mounted parallel to the moving direction of the
machine, with the breast in the direction of the circular blade(s) of the Saddle Cutter. Because of the movement of the cut-up line and the help of the rails, the correct cut is realized. It can be mounted on new Foodmate lines or added to existing lines.
SADDLE CUTTER 1
Our mission is to innovate, automate and bring cost-effective solutions to the industry.
Pantone 376
Pantone 298
70% blackThe Foodmate double blade Saddle Cutter with 2 motors can be used to do a single split of the leg quarters. It can also be adjusted in many ways to cut a strip of up to 5 cm out of the back bone.The chicken which is hanging on the Foodmate Cut-Up line is mounted parallel to the moving direction of the machine, with the breast direction of the circular knife of
the saddle cutter. Because of the movement of the Cut-Up line and the help of the rails, the right cut is realized.The height of the blades can be adjusted by adjusting the spindles, so they can be adjusted according to the size of the bird. It can also be installed on a existing Cut-Up lines.
SADDLE CUTTER 2
The Saddle Cutter 1 is the optimal machine to separate leg quarters.
The guiding system is designed to always give an accurate center split.
The chicken, hung on the Foodmate Cut-up line, is mounted parallel to the
moving direction of the machine, with the breast in the direction of the
circular blade(s) of the Saddle Cutter. This module can be mounted on new
Foodmate lines or added to existing lines.
SADDLE CUTTER 2
This module has motors that can be used to do a single split of the leg
quarters. It can also be adjusted in many ways to cut a strip of up to 5 cm
out of the back bone. The chicken, which is hanging on the Foodmate Cut-
up line is mounted parallel to the moving direction of the machine, with the
breast direction of the circular knife of the saddle cutter. The height of the
blades can be adjusted by adjusting the spindles, so they can be adjusted
according to the size of the bird. It can easily be installed on a existing Cut-
up lines.
THIGH AND DRUMSTICK CUTTER-NG
SADDLE CUTTER 1 OF CC
OF CC
The Thigh and Drumstick Cutter is a multi-purpose
machine that can be used for both retail and food
service applications. It has a simple construction
design that contains no rebuild points, this reducing
the cost of ownership. It provides an anatomic cut and
depending on the type of cut, various configurations
are possible. The electrical sync allows for more
accurate cutting and the absence of a 90 degree gear
box lowers maintenance costs.
THIGH AND DRUMSTICK CUTTER OF CC FS
9 Can be by-passed
9 Provides Straight anatomical cut / skin coverage suitable for tray packing
9 High yields on drum, leaving kneecap intact to the thigh
9 Designed provide a good cut on the fat line between drum and thigh
9 Lines speeds of 105 bpm at 12” center shackles and on 10” it is 125-130BPM
9 Line run birds from a 1.5 to 2.0 lbs. range, giving up to 95% USDA “A” Grade cutsAD
VA
NTA
GE
S
legs
CUT-UP MODULES
OF CC FS
665 mm (36,2")
916
mm
(36,
1")
887 mm (34,9")
100
mm
(3,9
")
MOTORS GET CHOOSEN AT CUSTOMER MAIN ASSEMBLY
FIRST ISSUE
02-08-2016
JR
JRC
C
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
TAIL CUTTER - INSIDE (UNIVERSAL)
FM.00.565.B11ARTICLE NO.
STATE
JRDRAWN
ERROR!:MaterialMATERIAL
FM.00.565.B11PREVIOUS
REV.
24-09-2014
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
22
TAIL CUTTER
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
Length: 665 mm
Width: 887 mm
Height: 916 mm
Weight: approx. 45 kg
TAIL CUTTER
649 mm (25,5")
100
mm
(3,9
")
413 mm (16,3")
122
4 m
m (4
8,2"
)
UPDATE
ERROR!:State
FIRST ISSUE
03-05-2016
Lsc
JRC
C
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
WING STRETCHER (UNIVERSAL)
FM.00.505.B00ARTICLE NO.
STATE
LscDRAWN
ERROR!:MaterialMATERIAL
FM.00.505.B00PREVIOUS
REV.
10-2-2015
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
22
WING STRETCHER
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame
Machine dimensions:
Length: 413 mm
Width: 649 mm
Height: 1224 mm
Weight: approx. 30 kg
WING STRETCHER
100
mm
(3,9
")
1271 mm (50,0") 754 mm (29,7")
130
4 m
m (5
1,4"
)
FIRST ISSUE
23-11-2016
JDK
JDKA
A
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
WING TIP CUTTER CW + WATER
FM.00.522.032ARTICLE NO.
STATE
JDKDRAWN
ERROR!:MaterialMATERIAL
FM.00.522.032PREVIOUS
REV.
23-11-2016
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
11
WING TIP CUTTER
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 2 x 0,75 kW
Machine dimensions:
Length: 754 mm
Width: 1271 mm
Height: 1304 mm
Weight: approx. 140 kg
WING TIP CUTTER
100
mm
(3,9
")
1106 mm (43,5")
130
8 m
m (5
1,5"
)
728 mm (28,7")
FIRST ISSUE
24-11-2016
JDK
JDKA
A
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
MID WING CUTTER CW + WATER
FM.00.515.053ARTICLE NO.
STATE
JDKDRAWN
ERROR!:MaterialMATERIAL
FM.00.515.053PREVIOUS
REV.
23-11-2016
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
11
MID WINT CUTTER
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 2 x 0,75 kW
Machine dimensions:
Length: 728 mm
Width: 1106 mm
Height: 1308 mm
Weight: approx. 151 kg
MID WING CUTTER
162
2 m
m (6
3,9"
)
785 mm (30,9")
100
mm
(3,9
")
1094 mm (43,1")
FIRST ISSUE
20-01-2017
JK
JRB
B
-
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A3
1:10
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
WING CUTTER SC BB - UNIVERSAL
FM.00.525.B05ARTICLE NO.
STATE
JKDRAWN
ERROR!:MaterialMATERIAL
FM.00.525.B05PREVIOUS
REV.
06-10-2016
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
21
SEVERAL CHANGES
WING CUTTER SC BB
APPROVED
D
E
F
C
1 2 3
B
A
321 5
C
4 6 7 8
A
B
E
D
4 5 876
F
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 2 x 0,75 kW
Machine dimensions:
Length: 1094 mm
Width: 785 mm
Height: 1622 mm
Weight: approx. 165 kg
WING CUTTER SUPER CUT
OF CC FS
OF CC FS
OF CC
OF CC
OF CC
146
0 m
m (5
7,5"
)
100
mm
(3,9
")
1027 mm (40,4")
151
5 m
m (5
9,7"
)
689 mm (27,1")
FIRST ISSUE
18-04-2016
ERROR!:DrawnBy
MVDA
A
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
WING CUTTER AFS (UNIVERSAL)
FM.00.528.B02ARTICLE NO.
STATE
ERROR!:DrawnByDRAWN
ERROR!:MaterialMATERIAL
FM.00.528.B02PREVIOUS
REV.
1-8-2012
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
21
WING CUTTER AFS
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 2 x 0,75 kW
Machine dimensions:
Length: 689 mm
Width: 1027 mm
Height: 1515 mm
Weight: approx. 167 kg
WING CUTTER AFS
754 mm (29,7")
100
mm
(3,9
")
949
mm
(37,
3")
1055 mm (41,5") 738 mm (29,1")
MOTORS GET CHOOSEN AT CUSTOMER MAIN ASSEMBLY
FIRST ISSUE
29-07-2016
KPR
JRC
C
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
FRONT PIECE CUTTER (UNIVERSAL)
FM.00.535.B06ARTICLE NO.
STATE
KPRDRAWN
ERROR!:MaterialMATERIAL
FM.00.535.B06PREVIOUS
REV.
9-2-2015
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
22
FRONT PIECE CUTTER
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 2 x 0,75 kW
Machine dimensions:
Length: 1055 mm
Width: 754 mm
Height: 949 mm
Weight: approx. 125 kg
BREAST CAP CUTTER
1442 mm (56,8")
185
3 m
m (7
3,0"
)
100
mm
(3,9
")
1251 mm (49,2") 917 mm (36,1")
FIRST ISSUE
25-07-2016
MBS
JRA
A
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:7
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
BREAST PROCESSOR CCW
FM.00.538.026ARTICLE NO.
STATE
MBSDRAWN
ERROR!:MaterialMATERIAL
FM.00.538.026PREVIOUS
REV.
23-05-2016
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
11
BREAST PROCESSOR
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
Length: 1442 mm
Width: 1251 mm
Height: 1853 mm
Weight: approx. 320 kg
BREAST PROCESSOR
1265,1mm (50'') 525,3mm (21'')
138
8mm
(55'
')
161
2mm
(64'
')
100
mm
(4'')
1136mm (45'')
FIRST ISSUE
F
-
84
14-11-2016
MBS
6F
7
B
5
F
8
E
7
LINEAR TOLERANCES [mm]*
1:10
±1,2
www.foodmate.nl
REV.
PROJECTION
±0,80,5≥6
±2,0
SCALE
ROUGHNESS*
SIZE
CUT SHARP EDGES [mm]*
1000>2000 2000>30>120JR
Tel. +31 (0)186 630240
120>315±0,3
6>30
FM.00.536.B00
±0,2
±1,0°- >10
±0,5
50 >120
acc. to NEN 3634
±0,5°10 >50 120 > -
±0,3°
[email protected] +31 (0)186 630249
SHEET
315>1000
±0,2°
/
OF FOODMATE IS PROHIBITED.
DESCRIPTION
Fillet 0,10 - 0,40 orCROSS HALVER (UNIVERSAL)
ARTICLE NO.
STATE
NEN 2365
DRAWN
REV.±0,1
REV. DESCRIPTIONDATE
2PREVIOUS
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*APPR.
FM.00.536.B00
MATERIAL
NEN 3311
*=at 20°C, unless stated otherwiseChamfer 0,10 - 0,25 x 45° Ra 6,3
Tolerances acc. to.
MBS
CROSS HALVER
C
SEVERAL CHANGES
D
C
41 2
E
D
2 3APPROVED
B
3
2
1
Dimension tol. acc. to.
A
5 6
A
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDS
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION
F
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 2 x 0,75 kW
Machine dimensions:
Length: 1136 mm
Width: 1265 mm
Height: 1612 mm
Weight: approx. 132 kg
FH CROSS HALVING MACHINE
OF CC
OF CC
OF CC
737 mm (29,0")
112
8 m
m (4
4,4"
)
680 mm (26,8")
100
mm
(3,9
")
FIRST ISSUE
23-05-2016
MVD
MVDA
A
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
HALVING MACHINE (UNIVERSAL) - (OUTSIDE)
FM.00.530.B06ARTICLE NO.
STATE
MVDDRAWN
ERROR!:MaterialMATERIAL
FM.00.530.B06PREVIOUS
REV.
23-05-2016
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
22
HALVING MACHINE (UNIVERSAL) - (OUTSIDE)
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
Length: 737 mm
Width: 680 mm
Height: 1128 mm
Weight: approx. 95 kg
SINGLE BLADE HALVING MACHINE OF CC
FS
CUT-UP MODULES
FOOD SERVICE HALVING MACHINE
716 mm (28,2")
104
2 m
m (4
1,0"
)
981 mm (38,6")
110
1 m
m (4
3,3"
)
FIRST ISSUE
10-01-2017
JDK
JDKA
A
-
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A1
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
LENGTHWISE CUTTER WITH POPPER CCW + WATER
FM.00.531.026ARTICLE NO.
STATE
JDKDRAWN
ERROR!:MaterialMATERIAL
FM.00.531.026PREVIOUS
REV.
10-01-2017
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
11
LENGTHWISE CUTTER
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11 12 13 14 15 16
1 5 9 12112 1563 4 8 10 13 14 167
F
G
H
J
K
L
M
C
H
L
K
B
E
D
A
G
M
J
F
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
Length: 981 mm
Width: 716 mm
Height: 1101 mm
Weight: approx. 148 kg
LENGHTWISE HALVING MACHINE
107
5 m
m (4
2,3"
)
670 mm (26,4")
100
mm
(3,9
")
711 mm (28,0")
ADD MOUNTING PLATE
FIRST ISSUE
03-01-2017
ERROR!:DrawnBy
JWID
D
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
SADDLE CUTTER - 1BL (UNIVERSAL)
FM.00.540.B20ARTICLE NO.
STATE
ERROR!:DrawnByDRAWN
ERROR!:MaterialMATERIAL
FM.00.540.B20PREVIOUS
REV.
07-08-2012
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
21
SADDLE CUTTER - 1BL
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
Length: 670 mm
Width: 711 mm
Height: 1075 mm
Weight: approx. 88 kg
SADDLE CUTTER 1
100
mm
(3,9
")
985 mm (38,8")
106
2 m
m (4
1,8"
)
762 mm (30,0")
First issue
FIRST ISSUE
01-08-2014
ERROR!:DrawnBy
MvDA
A
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
Saddle Cutter 2 motor (universeel)
FM.00.540.B02ARTICLE NO.
STATE
ERROR!:DrawnByDRAWN
ERROR!:MaterialMATERIAL
FM.00.540.B02PREVIOUS
REV.
31-07-2014
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
21
ERROR!:Description Manual
Approved
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 2 x 0,75 kW
Machine dimensions:
Length: 762 mm
Width: 985 mm
Height: 1062 mm
Weight: approx. 170 kg
SADDLE CUTTER 2
OF CC FS
OF CC
OF CC
160
8mm
(63'
') -X
- 1
00m
m (4
'') 1054mm (41'')
2099mm (83'') 1098mm (43'')
181
0mm
(71'
')
94
FIRST ISSUE
20-05-2016
MBS
MBSC
C
A
3 5 62 111 10
ROUGHNESS*
www.foodmate.nl
PROJECTION
REV.
SCALE
A2
1:11
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
Fax +31 (0)186 [email protected]
/Tel. +31 (0)186 630240
OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
LEG PROCESSOR
FM.00.549.B00ARTICLE NO.
STATE
MBSDRAWN
MATERIAL
FM.00.549.B00PREVIOUS
REV.
16-09-2015
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
55
LEG PROCESSOR
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDS
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION
8
181
0mm
(71'
')
2099mm (83'') 1098mm (43'')
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
(Frequency controlled)
Machine dimensions:
Length: 2099 mm
Width: 1098 mm
Height: 1810 mm
Weight: approx. 400 kg
OPTI LEG PROCESSOR OF CC
670 mm (26,4")
100
mm
(3,9
")
134
8 m
m (5
3,1"
)
721 mm (28,4")
UPDATE
FIRST ISSUE
29-09-2016
ERROR!:DrawnBy
MVDB
B
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
HALVING 2 MACHINE (UNIVERSAL) - KFC
FM.00.532.B01ARTICLE NO.
STATE
ERROR!:DrawnByDRAWN
ERROR!:MaterialMATERIAL
FM.00.532.B01PREVIOUS
REV.
20-9-2011
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
11
HALVING 2 MACHINE - KFC
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 2 x 0,75 kW
Machine dimensions:
Length: 721 mm
Width: 670 mm
Height: 1348 mm
Weight: approx. 150 kg
OF CC FS
1580 mm (62,2") 999 mm (39,3")
152
9 m
m (6
0,2"
) 100
mm
(3,9
")
957 mm (37,7") 701 mm (27,6")
FIRST ISSUE
17-01-2017
MBS
JRA
A
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:6
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
TDC FLEXLINE (UNIVERSAL)
FM.00.555.B11ARTICLE NO.
STATE
MBSDRAWN
ERROR!:MaterialMATERIAL
FM.00.555.B11PREVIOUS
REV.
02-11-2016
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
81
THIGH/DRUM CUTTER
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 2 x 0,75 kW
Machine dimensions:
Length: 1580 mm
Width: 957 mm
Height: 1529 mm
Weight: approx. 130 kg
THIGH & DRUMSTICK CUTTER
862 mm (33,9")
173
3 m
m (6
8,2"
)
725 mm (28,5")
100
mm
(3,9
")
UPDATE
ERROR!:State
FIRST ISSUE
19-04-2016
Lsc
MVDB
B
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:6
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
NECK/NECKSKIN CUTTER CHAIN (UNIVERSAL)
FM.00.560.B07ARTICLE NO.
STATE
LscDRAWN
ERROR!:MaterialMATERIAL
FM.00.560.B07PREVIOUS
REV.
15-9-2014
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
22
NECK/NECKSKIN CUTTER CHAIN
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
Length: 862 mm
Width: 725 mm
Height: 1733 mm
Weight: approx. 90 kg
NECK-NECKSKIN CUTTER
OF CC FS
OF CC FS
OF CC FS
1268 mm (49,9")
100
mm
(3,9
")
146
7 m
m (5
7,8"
)
1179 mm (46,4")
FIRST ISSUE
02-06-2016
MVD
MVDA
A
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:5
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
LEG PROCESSOR SII CCW
FM.00.545.B02ARTICLE NO.
STATE
MVDDRAWN
ERROR!:MaterialMATERIAL
FM.00.545.B02PREVIOUS
REV.
20-9-2013
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
21
LEG PROCESSOR SII CCW
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 1,5 kW
(Frequency controlled)
Machine dimensions:
Length: 1268 mm
Width: 1179 mm
Height: 1467 mm
Weight: approx. 290 kg
LEG PROCESSOR SII OF CC
2351mm (92,6")
2842mm (111,9")
183
7mm
(72,
3")
1150mm (45,3")
100
mm
(3,9
")
CW
FIRST ISSUE
02-05-2018
JDK
JDKA
A
-
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A1
1:10
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
THIGH DRUM CUTTER - 12"/5" (UNIVERSAL)
FM.00.554.B00ARTICLE NO.
STATE
JDKDRAWN
MATERIAL
FM.00.554.B00PREVIOUS
REV.
22-02-2018
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
22
THIGH DRUM CUTTER
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11 12 13 14 15 16
1 5 9 12112 1563 4 8 10 13 14 167
F
G
H
J
K
L
M
C
H
L
K
B
E
D
A
G
M
J
F
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
Length: 2351 mm
Width: 1150 mm
Height: 1837 mm
Weight: approx. 600 kg
THIGH & DRUMSTICK CUTTER NG
Technical Specifications:
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
Length: 2283 mm
Width: 1796 mm
Height: 1774 mm
Weight: approx. 350 kg
PRE CUTTER-KEELCUTTER-FATPULLER FS
102
mm
(4,0
")
1166 mm (45,9") 1789 mm (70,4")
102
mm
(4,0
")
166
8 m
m (6
5,7"
)
FIRST ISSUE
30-06-2016
MVD
MVDA
A
A
ROUGHNESS*
FOODMATE B.V.Röntgenstraat 183261 LK Oud-beijerlandTHE NETHERLANDSTel. +31 (0)186 630240Fax +31 (0)186 [email protected]
PROJECTION
REV.
SCALE
A2
1:8
CUT SHARP EDGES [mm]*
LINEAR TOLERANCES [mm]*0,5≥6 30>120 120>315 1000>2000 2000>
±2,0±1,2±0,8±0,5±0,36>30±0,2
315>1000
±1,0°- >10
acc. to NEN 3634
10 >50±0,5°
50 >120±0,3°
120 > -±0,2°
Fillet 0,10 - 0,40 or
SHEET
/THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF FOODMATE. ANY REPRODUCTION IN PART OR AS WHOLE WITHOUT THE WRITTEN PERMISSION OF FOODMATE IS PROHIBITED.
SIZE
DESCRIPTION
FATPULLER CCW - FLEXLINE (12 UNITS)
FM.00.512.B50ARTICLE NO.
STATE
MVDDRAWN
ERROR!:MaterialMATERIAL
FM.00.512.B50PREVIOUS
REV.
21-06-2016
REV. DESCRIPTIONAPPR. DATE±0,1
ANGULAR DEVIATION OF SHORTEST SIDE [mm]*
Ra 6,3Chamfer 0,10 - 0,25 x 45°*=at 20°C, unless stated otherwise
NEN 2365Dimension tol. acc. to.Tolerances acc. to. NEN 3311
11
FATPULLER CCW
APPROVED
D
E
C
B
A
321 54 6 7 8 9 10 11
F
G
H
A
F
C
H
G
E
B
D
7 101 112 653 94 8
CUT-UP MODULES
8-piece9-piece
We make it SIMPLE. You make it PROFITABLE.
foodmateus.com | foodmate.nl
The Netherlands (HQ) · USA · UK · Poland · Korea · Brazil
Our mission is to innovate, automate, and bring cost effective solutions to our customers.
Learn more about our Cut-up Systems