Embed Size (px)
Citation preview
Features and Benefits:+ Touch Screen: Patent pending Lightning Touch Technology™ for capacitive touch screen devices including but not limited to Smart Phones and iPads.
+ ANSI 105, 2011 Cut Level 3 engineered orange HPPE with > 1000 gram score on ASTM F1790-05 Cut Test
+ ANSI 105, 2016 Cut Level A3 with > 1000 gram score on ASTM F2992-15 Cut Test with TDM-100
+ ANSI 105 Puncture Level 5 with > 150 Newtons force to puncture on EN 388 Test Method
+ Never Slip Technology™ Thin-walled PU palm coating provides the highest dexterity and touch sensitivity and Superior Oily Grip
Apollo Miracle Grip™ Cut Protect 3 Touch Screen Gloves Ordering Information
Item No. Size Coating Liner Pairs per Polybag Pairs per Case
1011 Small Polyurethane Never Slip Technology™ (black color)
Orange colored HPPE ANSI Cut Level 3, A3
1 pair per polybag
36 polybags per case
36 pairs per Case (36)1012 Medium
1013 Large
1014 X-Large
1015 XX-Large
Cut Protect 3
ANSI Abrasion Level 6: This glove provides excellent abrasion resistance of ANSI Level 6, the highest rating, with >20,000 wear cycles on the Taber Abraiser. ANSI Abrasion Levels: 0 1 2 3 4 5 6 (See Reverse)
ANSI Puncture Resistance Level 5: Apollo Miracle Grip™ Cut Protect 3 glove features ANSI Puncture Resistance Performance Level 5, the highest rating, to a Nail-like object in EN 388:2003 Gloves for Mechanical Risks. ANSI Puncture Levels: 0 1 2 3 4 5 (See Reverse)
ANSI 2011Cut Level 3: Apollo Miracle Grip™ Cut Protect 3 glove features orange colored HPPE knit engineered to be ANSI Cut Level 3 (> 1000 grams) tested as specified in ASTM F1790 -05 Cut Test and rankings from ANSI 105: 2011 Edition.ANSI 2011 Cut Levels: 0 1 2 3 4 5 (See Reverse)
ANSI 2016 Cut Level A3: Cut Level A3 with > 1000 grams score with blade travel of 20 mm specified in ASTM F2992-15 Cut Test using TDM-100 Test Equipment.ANSI 2016 Cut Levels: A1 A2 A3 A4 A5 A6 A7 A8 A9
2011 ANSI Cut Level
3
2016 ANSI Cut Level
A3
For Assistance, Call:800-291-3763
17 Yale Road, Rome, GA 30161Phone: 800-291-3763
ANSI
5PUNCTURE
ANSI
6WEAR
ANSI Performance Ratings:ANSI 105-2011 American National Standard for Hand Protection Selection Criteria utilizes test results from established International standards. The test results provide the basis for a ranking system of hand protection performance in ASTM, EN or ISO Standards. The standard was established as a consensus of technical personnel from industry, government, manufacturing and testing and is intended for evaluation of gloves for protection from chemicals and physical hazards. As always, laboratory testing cannot simulate all industrial situations. Extraneous factors and multiple hazards may alter the performance of protective gloves.
Apollo Miracle Grip™ Cut Protect 3 Touch Screen Gloves have ANSI 2011 Cut Level of 3, > 1000 grams. The ANSI 2016 Cut Level is A3. The ANSI Abrasion Level is 6, the highest rating and the ANSI Puncture Resistance Rating is 5, the highest rating.
Recommended uses include but are not limited to:l Cut Resistance l Sheet Metal Handling l Razor Knives l Glassl TOUCH SCREEN l Tool Handling l Shipping & Receiving l Construction l Automotive l Maintenance & Repair l Garbage Collection l Utility Work l Roofing l Masonry l Scanners l Dexterityl Warehousing l Precision Assembly l Oily Grip
Cut Protect 3
Safe Chemical Levels: Apollo Gloves are designed to comply with the Safe Chemical Levels set forth by the Consumer Product Safety Commis-sion. Apollo Analytical Laboratory certifies that all Apollo gloves are in compliance with regulations set by the Safe Chemicals Act and Proposition 65 for safe levels of DEHP, DINP, Bisphenol A and numerous other chemicals that have been shown to cause birth defects, systemic toxicity or cancer to insure that Apollo gloves comply with Proposition 65 and REACH Regulations in the USA and Europe.
Apollo’s Color-Coded Cut Protect System™: Apollo’s full line of cut resistant gloves are color coded by the ANSI Cut Level. You can tell at a glance what the ANSI Cut Level is based on ANSI 105:2011:
Yellow Gloves ANSI Cut Level 2 Miracle Grip™ Cut Protect 2 and Tool Grabber™ Cut Protect 2
Orange Gloves ANSI Cut Level 3 Miracle Grip™ Cut Protect 3 and Tool Grabber™ Cut Protect 3
Red Gloves ANSI Cut Level 4Miracle Grip™ Cut Protect 4 and Tool Grabber™ Cut Protect 4, Tool Grabber™ Liquid Proof Cut Protect 4, Cut Eagle™ IV, PipeFitters™ Cut Protect IV.
Gray Gloves ANSI Cut Level 5 Tool Grabber™ Cut Protect 5, Tool Grabber™ Cut Protect 5, Uncoated
For Assistance, Call:800-291-3763
17 Yale Road, Rome, GA 30161Phone: 800-291-3763
ANSI 105 Abrasion Resistance Performance Ratings
Abrasion Level (500 gram load)
Cycles to Fail
0 < 100
1 > 100
2 > 500
3 > 1,000
Abrasion Level (1000 gram load)
4 > 3,000
5 > 10,000
6 > 20,000
ANSI 105 Puncture Resistance Performance Ratings
(Not a Hypodermic Needle)Puncture
Level Force (Newtons)
needed to puncture through
0 < 10 N
1 > 10 N
2 > 20 N
3 > 60 N
4 > 100 N
5 > 150 N
ANSI 105 Cut Level Performance RatingsWeight (grams) needed to cut through material
with 20 mm blade travel
Cut Level 2011 Edition
Weight (grams)
Cut Level 2016 Edition
Weight (grams)
0 < 200 g A0 < 200 g1 > 200 g A1 > 200 g2 > 500 g A2 > 500 g3 > 1000 g A3 > 1,000 g
4 > 1,500 gA4 > 1,500 gA5 > 2,200 gA6 > 3,000 g
5 > 3,500 g A7 > 4,000 g A8 > 5,000 gA9 > 6,000 g
