Custom Product Builder

Proudly “Made in the U.S.A.”

(800) 884-9388customerservice@stratatac.comsamples@stratatac.comwww.stratatac.com

3980 Swenson AveSaint Charles, IL 60174

Contact Us Today! Location

We build quality into every step of our process.

We truly understand the importance of getting the job done right the first time. Your order is checked multiple times by order entry, coating, slitting, shipping and invoicing departments.

Our employees take great pride in their work. We are proud to say Made in the U.S.A.

Our products are guaranteed 100%.

Our Quality

3-2020

Adhesive SelectorAdhesive Number

Emulsion Type

Service Temp Range

Min Application Temp Description

Perm

anen

t

601 Water Based Acrylic -25F to +135F +35F

A general purpose acrylic adhesive with good initial tack, high shear and ultimate adhesion. 601 approved for indirect food and is also a repulpable adhesive.

610 Water Based Acrylic -40F to +250F +35F

Outdoor, marine grade permanent adhesive. High performance for tight mandrels and is BS5609 certified. Skin safe, indirect food approved and very durable.

616 Water Based Acrylic -65F to +250F +25F

High Shear Solvent Replacement Water Based Acrylic Perm. High solids means a higher coat weight. Excellent for low energy surfaces.

617 Water Based Acrylic -65F to +250F -20F

All Temp adhesive with good high speed convertability, excellent low temperature performance and rapid wet out.

619 Water Based Acrylic -65F to +250F -20F High Shear adhesive for Indoor/Outdoor use. Rated for

BS5609 Drum Label.

Rem

ovab

le 614 Water Based Acrylic -65F to +250F -10F

Mid-tack all temp removable. FDA approved for Direct Food Contact, it is blood bag compliant and skin safe. It also performs excellent as a shelf marking adhesive.

611 Water Based Acrylic -65F to +150F +40F Mid-tack removable adhesive. Excellent for shelf labels

or other applications when clean removability is a must.

Ult

ra-

604 Water Based Acrylic -50F to +125F -10F

Ultra removable “cling” adhesive with excellent remov-ability from glass. Use for window decals, oil change, or as a vinyl cling substitute and is approved for indirect food labeling.

Liner SelectorCaliper / Weight

Surface Finish

Printable (Y/N) Description

Pap

er

25# SCK N 25# sck for roll labels and hot melt coating and is laser printable

40# SCK N 40# sck for roll labels

50# SCK N 50# sck for high speed die cutting

1.7 Glassine N 1.7mil glassine with ultra easy release

2.1 Clay Coated Y 2.1 mil clay coated for laser liners

2.5 Clay Coated Y 2.5 mil clay coated for laser, fanfold, or sheets

3.4 Clay Coated Y 3.4 mil clay coated for laser, fanfold, or sheets

4.6 Clay Coated Y 4.6 mil clay coated for laser, fanfold, or sheets

Film

1.2 Clear PET N Excellent strength for high speed application

1.5 Clear PET N Excellent strength for high speed application

3.0 Clear PET N Excellent strength for high speed application

Lay

Flat

3.4 Clay Coated Y 50# clay coated Lay-Flat

4.6 Clay Coated Y 69# clay coated Lay-Flat

6.8 PK N 92# PK Lay-Flat

8.0 Tag Y 8.0 Mil Tag Lay-Flat

Your Custom Product ConstructionProduct #1 Product #2

Top Coat

Face Stock

Adhesive

Liner/Mid

Adhesive

Liner

Other Requirements Application

Size of Label

Qty of Labels

Slit Roll Width

Roll Length

Total Footage

How to use the Strata-Tac Custom Product Builder Below is the Strata-Tac Printable Top Coat Guide. If your label will require

a top coat for printing select one from the guide below.

Next, select the Film needed for your labels face stock and/or mid-ply from the Film Selector on the next page.

Finally, turn to the back page and select your Adhesive and Liner.

Using the tables in this brochure, complete the chart below with the Top Coat, Film, Adhesive and Liner needed for your label construction. The tables include our standard products. If you do not see what you need, contact Strata-Tac Customer Service or your sales representative for assistance.

Then, contact us for a quote. You can call our Customer Service team at 630-879-9388, email us at Customerservice@stratatac.com, or contact your Strata-Tac sales representative.

Complete the “Other Requirements” section with any information you have available.

Printable Top Coat GuideStrata-Tac Top Coat

Code

Large Production Laser Printers

LED Laser

Home or Office Desk Top Laser

Off-Set and Flexo Printing Specialty Indigo/ Liquid

Toner Engines

Aqueous Inkjet *Wide Format

available

UV Inkjet

Thermal Transfer

Direct Ther-mal

ExamplesKonica Minolta,

Ricoh, Xerox, Can-non, Nexpress

Okidata, Xeikon

HP Lexmark

IGEN Indigo MemJet Mark Andy, Domino, Xe-ikon, Durst

Zebra, Sato Zebra, Sato

X (MT) Matte Digital ✓ ✓ ✓ ✓ Simplex ✓ ✓

SC Super Clear Gloss Digital

✓ ✓ ✓ Simplex ✓ ✓ ✓

DL Satin Digital ✓ ✓ ✓ ✓

GL Gloss Digital ✓ ✓ ✓ ✓

LI Laser Indigo ✓ ✓ ✓ ✓ Simplex ✓ ✓

I Gloss Indigo ✓ ✓

IM Double Matte ✓ ✓ ✓ Duplex ✓ ✓ ✓

IG Inkjet Gloss ✓ ✓ ✓

MV Soft Touch ✓ ✓ ✓

P Gloss Primer ✓ ✓ ✓

DT Direct Thermal ✓

**All testing is from Strata-Tac data and not necessarily from the printer manufacturer. This is intended to be a guide only and all applications should be tested by the customer. 3-2020

Film SelectorCaliper (mils) Color Surface

Finish Treated Features

BOPP

2.0 White Matte 2 side Cavitated white BOPP for low cost film applications

2.3 White Gloss 1 side Gloss top coated for flexo and thermal transfer printing

3.0 White Matte 1 side Ideal for lamination into PS label structures for great stiffness for dispensability

4.0 White Matte 2 sides Ideal for wrist bands or durable label products

6.0 White Matte 2 sides Ideal for wrist bands or durable label products

8.0 White Matte 2 sides Print two sides Ideal for menus and other two sided applications

0.75 Clear 1 side Ideal for the production of IRC labels

2.0 Clear 1 side Ideal for window decals or for use as an overlaminate

Poly

este

r

2.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock

3.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock

4.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock

5.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock

6.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock

7.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock

10.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock

0.5 Clear Untreated Ideal for use as an overlaminate or as a durable label stock

1.0 Clear 2 sides Ideal for use as an overlaminate or as a durable label stock

1.5 Clear Untreated Ideal for use as an overlaminate or as a durable label stock

2.0 Clear 2 sides Ideal for use as an overlaminate or as a durable label stock

3.0 Clear Untreated Ideal for use as an overlaminate or as a durable label stock

4.0 Clear Untreated Ideal for use as an overlaminate or as a durable label stock

5.0 Clear 2 sides Ideal for use as an overlaminate or as a durable label stock

7.0 Clear 2 sides Ideal for use as an overlaminate or as a durable label stock

10.0 Clear 2 sides Ideal for use as an overlaminate or as a durable label stock

Viny

l

3.2 White Matte 1 side Ideal for use when a durable label is needed such as shelf marking and other signage

7.0 White Matte 2 sides Laser and HP Indigo printable film is ideal as a Teslin replacement and printable on both sides

3.0 Clear Gloss 1 side Ideal for use when a durable label is needed, applications include shelf marking and other signage

Synt

hetic 7.0 White Matte 2 sides Ideal for use when a tear resistant, water proof, opaque pirntable film is needed

4.0 to 7.0 White Matte 2 sides UV, high scuff and weather resistants is ideall for outdoor applicationsl like banners, signs & labels

Spec

ialty 2.0 Metalized Rainbow 1 side Metalized PET with a rainbow finish

53# White Matte 2 sides 53# Smudge Latex impregnated stock with excellent smudge resistance