32
0 Custom Hood Inserts Hotte encastrable et adaptable Manuel du propri_taire La section frangaise commence 6 la page 11 Campana a medida Manual del propietado La secci6n en espafiol empieza en la p6gina 21 I 49-80565 I 10-08JR monogram.cam

Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

0

Custom Hood Inserts

Hotte encastrable et adaptableManuel du propri_taire

La section frangaise commence 6 la page 11

Campana a medidaManual del propietado

La secci6n en espafiol empieza en la p6gina 21

I 49-80565 I

10-08JR

monogram.cam

Page 2: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Consumer Information

Custom Hood Insert

Contents Consumer Information

Important Phone Numbers ..................... 9Model and Serial Numbers ...................... 2Problem Solver .................................. 8Safety Instructions .............................. /4Warranty ...................................... 10

Controls and Features ......................... 5

Care and Cleaning

Light Bulbs ...................................... 7Metal Grease Filters ............................. 6Stainless Steel Hood Surfaces ................... 7

Before

using gourcustomhoodinsert

Read this manual carefullg. It is intended to helpgou operate and maintain gour new custom hoodinsert properlg.

Keep it handg for answers to gour questions.

If gou don't understand something or need morehelp, there is a list of toll-free consumer servicenumbers included in the back section of thismanual.

OR

Visit our Website at: monogram.com

Writedown themodel &serialnumbers

You'll find them on a label behind the removablefilters.

These numbers are olso on the Consumer ProductOwnership Registration Card packed separatelgwith uour hood.

Visit monogram.com and click on "Register YourAppliance" to register your custom hood insert.

Before sending in this card, please write thesenumbers here:

Hodel Number

Serial Number

Usethese numbers in any correspondence orservice calls concerning gour hood.

If goureceived adamagedhood

Immediately contact the dealer (or builder) thatsold gou the hood.

Page 3: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Consumer Information

Custom Hood Insert

Save time& money

Before you request service, check the ProblemSolver in the back of this manual.

It lists causes of minor operating problems thatyou can correct yourself.

If youneedservice

To obtain service, see the Consumer Services pagein the back of this manual.

We're proud of our service and want you to bepleased. If for some reason you are not happy withthe service you receive, here are some steps tofollow for further help.

FIRST,contact the people who serviced yourappliance. Explainwhy you are not pleased.In most cases, this will solve the problem.

NEXT,if you are still not pleased, write all thedetails-including your phone number-to:

Hanager, Customer RelationsGEAppliancesAppliance ParkLouisville,KY/40225

Page 4: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

IMPORTANT SAFETY INSTRUCTIONSREAD ALL INSTRUCTIONS BEFORE USING

SAFETY PRECAUTIONS

.Z_WAR N ING-ToREDUCETHERISKOF FIRE,ELECTRICSHOCKOR INJURYTOPERSONS,OBSERVETHE FOLLOWING:

A. Use this unit only in the monner intendedby the monufocturer. If you hove questions,contoct the monufocturer.

B. Before servicing or cleoning unit, switchpower off ot service ponel ond lock the servicedisconnecting meons to prevent power frombeing switched on occidentolly. When theservice disconnecting meons connot belocked, securely fosten o prominent worningdevice, such os o tog, to the service ponel.

C. Do not use this unit with ony solid-stote speedcontrol device.

D. This unit must be grounded.

.4LCAUTION-FoR GENERALVENTILATINGUSEONLY.DO NOT USETOEXHAUSTHAZARDOUSOR EXPLOSIVEMATERIALSAND VAPORS.

-& WAR N ING-ToREDUCETHERISKOF INJURYTO PERSONSIN THE EVENTOF ARANGETOP GREASEFIRE,OBSERVETHEFOLLOWING*:

A. SMOTHERFLAMESwith o close-fitting lid,cookie sheet or metol troy, then turn off theburner. BECAREFULTO PREVENTBURNS.If theflumes do not go out immediotely, EVACUATEAND CALLTHE FIREDEPARTMENT.

B. NEVERPICKUPA FLAMINGPAN--You moy beburned.

C. DO NOTUSEWATER,including wet dishclothsor towels-o violent steom explosion willresult.

D. Use on extinguisher ONLYif:1. You know you hove o Closs ABC

extinguisher, ond you olreody knowhow to operote it.

2. The fire is smoll ond contoined in theoreo where it storted.

3. The fire deportment is being coiled.

4. You con fight the fire with your bockto on exit.

*Bosed on "Kitchen Firesofety Tips" published byNFPA.

READ AND SAVETHESE INSTRUCTIONS.

-_ WARNI NG-ToREDUCETHERISKOF A RANGETOP GREASEFIRE:

A. Never leove surfoce units unottended ot highsettings. Boilovers couse smoking ond greosyspillovers thot moy ignite. Heot oils slowly onlow or medium settings.

B. Alwoys turn hood ON when cooking ot highheot or when flomb_ing food (i.e.CrepesSuzette, Cherries Jubilee, Peppercorn BeefFlomb_).

C. Clean ventilating fons frequently. Greoseshould not be allowed to occumulote onfon or filter.

D. Use properpon size.Alwoysusecookworeopproprioteforthesizeofthesurfoceelement.

.4LWARNING-To REDUCETHERISKOF FIRE,ELECTRICSHOCKOR INJURYTOPERSONS,OBSERVETHE FOLLOWING:

A. Instollotion work ond electricol wiring must bedone by quolified person(s)in occordonce withoil opplicoble codes ond stondords, includingfire-reloted construction.

B. Sufficient oir is needed for proper combustionond exhousting of goses through the flue(chimney) of fuel burning equipment toprevent bock drofting. Follow the heotingequipment monufocturer's guidelines ondsofety stondords such os those published bythe Notionol Fire Protection Associotion (NFPA),ond the Americon Society for Heoting,Refrigerotion ond Air Conditioning Engineers(ASHRAE),ond the Iocol code outhorities.

C. When cutting or drilling into woll or ceiling, donot domoge electricol wiring ond other hiddenutilities.

D. Ducted fons must olwoys be vented to theoutdoors.

-_ WARNING-To REDUCETHE RISK

OF FIRE,USE ONLYMETALDUCTWORK.

• Do not ottempt to repoir or reploce onyport of your hood unless it is specificollyrecommended in this monuol. All otherservicing should be referred to o quolifiedtechnicion.

-4LCAU TI0 N--AUTOMAT,CALLYOPERATED DEVICE. TO REDUCE THE RISK OF

INJURY, DISCONNECT FROM POWER SUPPLYBEFORE SERVICING. THE UNIT IS EQUIPPEDWITH AN INTEGRAL DISCONNECTING SWITCHLOCATED INSIDE THE BLOWER HOUSING.

Page 5: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Controls and Features

Custom Hood Insert

Controls NOTE:Avoid using food products that produceflames under the range hood.

1o

2o

3o

4o

So

FAN DECREASE ON/OFR Press to turn on and

decrease fan settings. It remembers the last

fan level used. The buttons allow you to cyclearound to the desired setting. (Use to set the fan

speed to LOW, MED, HIGH, BOOST or OFF.)

FAN INCREASE ON/OFR Press to turn on and

increase fan settings. It remembers the last

fan level used. The buttons allow you to cycle

around to the desired setting. (Use to set the fan

speed to LOW, MED, HIGH, BOOST or OFF.)

SENSOR FEATURE--The hood fan will

automatically turn on atthe iVlEDsetting if

cooking temperatures become too hot. The fanwill stag on for a minimum of 3 minutes and will

then turn off when temperatures cool to an

appropriate level.

LIGHT DECREASE ON/OFR Press to turn on

and dim the lights. It remembers the last lightlevel used. The buttons allow you to cycle

around to the desired setting. (There are four

light levels/settings and OFF.)

LIGHT INCREASE ON/OFR Press to turn on

and brighten the lights. It remembers the last

light level used. The buttons allow you to cyclearound to the desired setting. (There are four

light levels/settings and OFF.)

POWER ON/OFR Press to activate (turnon)/deactivate (turn off) the control buttons.

When the buttons are active (turned on), their

outer rings will be illuminated. When active

(turned on), the hood lights and fan willautomatically turn on at their lost settings.

NOTES:

• Always deactivate (turn off) the buttons whenthe hood is not in use.

• If both the LIGHT and FAN are set to OFF,the

buttons will automatically deactivate (turn off)after 10 seconds.

OFAN

1 2

Monogram°

LIGHT

3 4 5

Page 6: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Care and Cleaning

Custom Hood Insert

For yoursafety

Before servicing or cleaning the unit, switchpower off at the service panel and lock the servicepanel to prevent power from being switched onaccidentally. If the service panel cannot be locked,fasten a tag or prominent warning label to thepanel.

Metal

greasefilters

The metal filters trap grease released bg foodson the cooktop. The filters also help prevent flames(from food, grease)from damaging the inside of thehood.

For this reason, the filters must ALWAYSbe in placewhen the hood is used.The grease filters should becleaned everg 6 months, or as needed.

To remove:

Support the filter with one hand while pulling downfilter clip with the other. Pull the filter down and out.

To replace:

1. Tip the filter into the back tab slots and lift up.

2. While maintaining slight upward pressure onfilter, open clip and press into place with twohands.

To clean, swish the filter in hot soapg water andrinse in clean water or wash it in the dishwasher.Do not use abrasive cleansers.

Clip

\

Page 7: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Care and Cleaning

Custom Hood Insert

Stainlesssteel hoodsurfaces

Do not use a steel wool pad; it will scratchthe surface.

To clean the stainless steel surface, use warmsudsu water or a stainless steel cleaner or polish.Always wipe the surface in the direction of thegrain. Follow the cleaner instructions for cleaningthe stainless steel surface.

To inquire about purchasing stainless steelappliance cleaner or polish, or to find the locationof a dealer nearest gou, please call our toll-freenumber:

National Parts Center 800.626.2002

monogram.com

Light bulbs To change the light bulbs:

1. Grasp the outer trim ring and twist until reachingthe unlock position. Then pull the ring straight out.

2. Grasp the bulb and twist until reaching the unlockposition. Then gentlu pull the bulb straight out.

3. Replacewith the same wattage, tgpe and sizebulb. Wear gloves. Do not touch bulb with gourbare fingers.

These 120 volt, 50 watt halogen bulbs with aGUIO base are available at specialty lightingstores and home building centers.

. Replacethe outer trim ring by inserting the tworetaining tabs into the two tab slots, pressing thering flush with the surface of the hood insert andtwisting until reaching the lock position.

Page 8: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Ouestions?Use this

problemsolver!

The Problem Solver

Custom Hood Insert

PROBLEM

FAN AUTOMATICALLY

TURNS ON AND CAN

NOT BE TURNED OFF

FAN DOES NOT

OPERATE WHEN

TURNED ON

FAN FAILS TO CIRCULATE

AIR OR MOVES AIR

SLOWER THAN NORMAL

FAN KEEPS GOING

OFF AND ON

LIGHT WILL NOT STAY

ON HIGH SETTING

THE HOOD CONTROLS

ARE NOT OPERATING

CORRECTLY

SEQUENTIAL PRESSESOF THE LIGHT OR FAN

BUTTONS WILL

SOMETIMES CHANGE

THE SETTING FROM THE

LOWEST SETTING-TO OFF-

TO THE HIGHEST SETTING,OR FROM THE HIGHEST

SETTING-TO OFF-TO THE

LOWEST SETTING

WHEN PRESSING THE

POWER ON/OFF BUTTON

TO TURN ON THE LIGHT,THE FAN COMES ON

INSTEAD

POSSIBLE CAUSE

The Sensor feature will automaticallg turn the fan on at theMED setting if cooking temperatures become too hot. The fanwill stag on for a minimum of 3 minutes and will then turn off whentemperatures cool to an appropriate level.

A fuse mag be blown or a circuit breaker tripped. Replace fuse orreset circuit breaker.

The power disconnect switch inside the hood mag be switched off.Remove the metal grease filters and flip the switch on.

Check to be sure the metal grease filters are clean. Clean the metalgrease filters (see the Metal greose filters section). If cleaningthe filters does not correct the problem, call for service.

The motor is probablg overheating and turning itself off. This canbe harmful to the motor. Check to be sure the filters are clean. If offand on cgcling continues, call for service.

Use 120 volt, S0watt halogen bulbs with a GU10 base and make suretheg are inserted securelg. Seethe Light bulbs section.

Disconnect power to the hood bg removing the fuse or turning thecircuit breaker off in the home fuse box. Wait 30 seconds to allow thehood controls to reset and then replace the fuse or move the circuitbreaker back on.

It is normal for the light and fan buttons to cgcle around through thesettings so that gou can easilg set the controls to the desired setting.

For gour convenience, it is normal for the lights and fan to remembertheir last setting when gou press the Power On/Off button. If gouwant onlg the lights on, press the "FAN +" (or the "FAN -" ) button untilthe fan is off. When gou power the hood up next time, onlg the lightswill function.

Page 9: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Consumer Services

Custom Hood Insert

With the purchase of gour new Monogram appliance,receive the assurance that if gou ever need information orassistance from GE, we'll be there. All gou have to do is call--toll-free!

GE AnswerCenter _

800.626.2000

Whotever your question obout ony Monogrom mojor opplionce, GEAnswer Center® informotionservice is ovoiloble to help. Your coll-ond your question-will be onswered promptly ondcourteously. GEAnswer Center® service is open 8 a.m. to 10 p.m. ESTMonday - Friday and8 a.m. to 7 p.m. ESTSaturday.

OR

Visit our Website ot: monogram.cam

MonogramPreferred

Service

800.444.1845

AGE consumer service professionol will provide expert repoir service, scheduled ot o time thot'sconvenient for you. Mony GEConsumer Service compony-operoted Iocotions offer you servicetodoy or tomorrow, or ot your convenience (7 o.m. to 10 p.m. ESTMondoy- Fridoy, 8 o.m. to6 p.m. ESTSoturdoy ond Sundog). Our foctorg-troined technicions know your opplionce insideond out-so most repoirs con be hondled in just one visit.

For CustomersWith SpecialNeeds...

800.626.2000

s_c'rloN A._

GEoffers, free of chorge, o brochure to ossist in plonning o borrier-freekitchen for persons with limited mobility.

Consumers with impoired heoring or speech who hove occess to o TDDor o conventionol teletypewriter moy coil 800.TDD.GEAC(800.833.4322)to request informotion or service.

ServiceContracts

800.626.2224

You con hove the secure feeling thot GEConsumer Service will still be there ofter yourworronty expires. Purchose o GEcontroct while your worronty is still in effect ond you'll receiveo substontiol discount. With o multiple-yeor controct, you're ossured of future service ottodoy's prices.

Parts andAccessories

800.626.2002

Individuols quolified to service their own opplionces con hove ports or occessories sent directlyto their home. The GE ports system provides occess to over 47,000 ports...ond oil GEGenuineRenewol Ports ore fully worronted. VISA, MosterCord ond Discover cords ore occepted.

User maintenance instructions contained in this manuel cover procedures intended to beperformed bg eng user. Other servicing generellg should be referred to qualified servicepersonnel. Caution must be exercised, since improper servicing meg cause unsafe operation.

Page 10: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Warranty

Custom Hood Insert

YOUR MONOGRAM HOOD WARRANTYStaple sales slip or cancelled check here. Proof of originalpurchase date is needed to obtain service under warranty.

WHAT ISCOVERED

LIMITED ONE-YEAR WARRANTY

For one year from date of original purchase, we will provide, free of charge, parts andservice labor in your home to repair or replace any part of the hood that fails becauseof a manufacturing defect.

This warranty is extended to the original purchaser and any succeeding owner for productspurchased for ordinary home use in the/48 mainland states, Hawaii and Washington, D.C.If the product is located in an area where service by a GEAuthorized Servicer is not available,you may be responsible for a trip charge or you may be required to bring the product to anAuthorized GEService Location for service. In Alaska the warranty is the same except that itis LIMITEDbecause you must pay to ship the product to the service shop or for the servicetechnician's travel costs to your home.

All warranty service will be provided by our Factory Service Centers or by our authorizedCustomer Care® servicers during normal working hours.

Should your appliance need service, during warranty period or beyond, call 800.444.1845.Please have your serial number and model number available when calling for service.

WHAT IS NOTCOVERED

Service trips to your home to teach you

how to use the product.

Replacement of house fuses or resettingof circuit breakers.

Incidental or consequential damagecaused bg possible defects with thisappliance.

Replacement of the replaceable filters.

Damage to the product caused bgaccident, fire, floods or acts of God.

Damage caused after deliverg.

• Failure of the product if it is used for

other than its intended purpose or used

commercially.

• Improper installation.

If gou have an installation problem,contact gour dealer or installer. You areresponsible for providing adequateelectrical, gas, exhausting and otherconnecting facilities as described in theInstallation Instructions provided withthe product.

• Product not accessible to provide requiredservice.

EXCLUSIONOF IMPLIED WARRANTIES--Voursole and exclusive remedy is product repairas provided in this Limited Warranty. Any implied warranties, including the impliedwarranties of merchantability or fitness for a particular purpose, are limited to oneyear or the shortest period allowed by law.

Some states do not allow the exclusion or limitation of incidental or consequential damages, sothe above limitation or exclusion may not apply to you. This warranty gives you specific legalrights, and you may also have other rights which vary from state to state.

To know what your legal rights are in your state, consult your local or state consumer affairsoffice or your state's Attorney General.

Warrantor: General Electric Compang. Louisville, KY4022510

Page 11: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Information de consommateur

Hotte encostroble et odoptoble

Table desmatidres

Service au consommateurGarantie ....................................... 20Instructions de S@curit_....................... 13Mod@leet num@ro de s@rie................... 11Num@rosde t_l@phone importants ........... 19R_solution de probl@mes...................... 17

Commandes et param_tres .................. 14

Nettogage et entretienAmpoules ..................................... 16Filtres m#talliques a graisse ................... 15Surfaces de la hotte en acier inoxudable ...... 16

Avantd'utiliservotre hotteencastrableetadaptable

Lisezattentivement ce manuel. II a _t_ conqupour vous aider 5 utiliser et _ entretenircorrectement votre nouvelle hotte encastrableet adaptable.

Conservez-le 5 port_e de main pour r_pondrevos questions.

Si vous ne comprenez pas quelque chose ou quevous avez besoin d'aide, vous trouverez la listedes num_ros d'appel gratuit du service apr_s-vente au verso de la couverture de ce manuel.

OU

Visitez notre site web sur : monogram.corn

Notez lesnum4rosde moduleet de s6rie

Vous les trouverez sur I'_tiquette derriere lesfiltres d_tachables.

Ces num_ros figurent _galement sur la carted'enregistrement de propri_t_ du produit emball_s_par_ment avec votre hotte.

Allez sur monogram.com et cliquez sur "Enregistrezvotre appareil" pour enregistrer votre hotteaspirante.

Avant d'envoger la carte, veuillez noter lesnum_ros ici:

Num_ro de module

Num_ro de s_rie

Utilisez ces num_ros dans toute correspondanceou pour tout appel au service apr_s-vente,concernant votre hotte.

Si vous

recevezune hotte

endommag6e

Contactez imm_diatement le revendeur (oule constructeur) qui vous a vendu la hotte.

11

Page 12: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Informotion de consommoteur

Hotte encostroble et odoptoble

Economisezdu temps etde I'argent

Avant de demander I'assistance,reportez-vousau r@solveurde probl@mefigurant au dos de cemanuel.

II r_pertorie les causes des dgsfonctionnementsmineurs que vous pouvez corriger par vos propresmogens.

Si vous avezbesoind'uneintervention

Pour utiliser le service, consultez la page duservice au verso de la couverture de ce manuel.

Nous sommes tiers de notre service et nousvoulons que vous en sogez satisfait. Si, pour unequelconque raison, vous @tesm@content duservice fourni, voici la proc@dure@suivre pourobtenir une aide suppl@mentaire.

PREMIEREMENT,contactez la personne qui ar@par@votre appareil. Expliquez-lui les raisons devotre m@contentement. Dans la plupart des cas,cela r@soudra le probl@me.

ENSUITE,si vous @testoujours m@content,@criveztousles d@tails-g compris votre num@rode t_l@phone-@ :

Manager,Customer RelationsGEAppliancesAppliance ParkLouisville,KY40225

12

Page 13: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

INSTRUCTIONS DE SECURITE IMPORTANTESLISEZTOUTES LES INSTRUCTIONS AVANT D'UTILISER VOTRE APPAREIL

PRECAUTIONS EN HATIERE DE SECURITE

AVERTISSEMENT:POUR RI_DUIRE LE RISQUE D'INCENDIE,

DE SECOUSSE I'-_-LECTRIQUE OU DE BLESSURE

CORPORELLE, OBSERVEZ LES PRI_CAUTIONSSUIVANTES :

A. N'utilisez cet appareil que de la mani_re pr_vue

par Jefabricant. Si vous oyez des questions, appelezJefabricant.

B. Avant de r_parer ou de nettoyer votre appareiJ,d_branchez Jecourant au niveau du panneaude service et verrouiJJez les m_canismes de

d_branchement de service pour _viter tout

branchement accidentel au courant. Si vous ne pouvezpas verrouiJJer Jes m_canismes de d_branchement deservice, attachez soigneusement un avertissement bien

visible, comme une _tiquette, au panneau de service.

C. N'utilisezjamais cet appareiJ avec un m_canisme

de r_gJage de Javitesse 6 semi-conducteurs.

D. Cet appareiJ dolt _tre bien mis 6 la terre.

ATTENTION : UN,QUEMENTAUSAGE DE VENTILATION GI_NI_RALE. N'UTILISEZ

JAMAIS POUR L'I:CHAPPEMENT DE MATII:RES ET

DE VAPEURS EXPLOSIVES.

AVERTISSEMENT:POURRI_DUIRE LE RISQUE DE BLESSURE CORPORELLE SIDE LA GRAISSE PREND FEU SUR LA SURFACE DE

CUISSON DU FOUR, SUIVEZ LES INSTRUCTIONSSUIVANTES* :

A. t_TOUFFEZLES FLAIVIIVlESavec un couvercle quiconvient, une t61e 6 biscuits ou un plateau en m@tal,

puis @teignez le brOleur. FAITES BIEN ATTENTION DE NEPAS VOUS BROLER.Si les flammes ne s'@teignent pasimm@diatement, SORTEZ ET APPELEZ LES POIVlPIERS.

B. NE Dt_PLACEZJAIVlAIS UNE CASSEROLLE QUI FLAIVIBE-

Vous pouvez vous brOler.

C. N'UTILISEZ JAIVlAIS D'EAU, en particulier de serviette oude chiffon mouill@-il se produira une explosion violentede vapeur brOlante.

D. N'UTILISEZ UN EXTINCTEUR que si :

1. Vous avez un extincteur de classe ABC et vous savez

comment I'utiliser;

2. Le feu est r@duit et confin@ 6 I'endroit oO il a

commenc@;

3. Vous avez d@j6appel@ les pompiers;

4. Vous combattez les flammes en tournant le dos 6une sortie.

* Bas@sur I'ouvrage intitul@ <<Kitchen Fire Safety Tips>>

publi@ par la NFPA.

LISEZ ET CONSERVEZCES INSTRUCTIONS.

_ZiAVERTISSEMENT: R DU,SEZLE RISQUE D'UN FEU DE GRAISSE SUR LA SURFACEDE CUISSON DU FOUR :

A. Ne laissezjamais sans surveillance les unit_s de cuissonde surface 6 une temperature _lev_e. Le bouillonnement

occosionne des d_bordements fumants et graisseux qui

peuvent prendre feu. Chauffez 6 feu doux les substanceshuileuses, avec un r_glage has ou moyen.

B. Ne pr_parez pas des mets flamb@s sur la cuisini_re.Si vous pr_parez des mets flamb_s sous la hotte, mettezle ventilateur en marche.

C. Nettoyez les m_canismes de ventilation fr_quemment.IIne fout pas permettre une accumulation de graisse surle ventilateur ou sur le filtre.

D. Utilisez une casserole de bonne taille. Utilisez toujours

un ustensile de cuisine qui convienne au diam_tre del'_l_ment de cuisson.

AVERTISSEMENT: POURRIeDUIRE LE RISQUE D'INCENDIE, DE SECOUSSE

IeLECTRIQUE OU DE BLESSURE CORPORELLE,OBSERVEZ LES PRIeCAUTIONS SUlVANTES :

A. Vous devez faire ex_cuter tous Jestravaux d'instalJation

et de c_blage _lectrique par une personne qualifi_e,conform_ment 6 tousles codes et les normes en

vigueur, en particulier ceux de construction relatifsaux incendies.

B. Vous devez assez d'air pour avoir une bonne combustion

et permettre l'_vacuation des gaz par le conduit dechemin_e du materiel de combustion du carburant, afind'_viter tout retour d'oir. Suivez les directives du fabricant

de materiel de combustion et les normes de s_curit_

comme celles publi_es par la National Fire Protection

Association (NFPA)et l'American Society for Heating,Refrigeration and Air Conditioning Engineers (ASHRAE),ainsi que les modalit@s des codes locaux.

C. Si vous faites un trou ou une ouverture dans un tour ou

un plafond, n'endommagez pas les ills @lectriques et les

autres installations cach_es de service public.

D. Vous devez toujours alimenter les ventilateurs dans les

conduits en air en provenance de I'ext@rieur.

AVERTISSEMENT:POUR

RI_DUIRE LE RISQUE D'INCENDIE, N'UTILISEZ QUEDES CONDUITS EN MI_TAL

• N'essoyezjomois de remplocer ou de r_porer un

_l_ment de votre hotte si le present manuel ne le

recommande pus express_ment. Tout autre entretiendolt @treeffectu_ par un technicien qualifi_.

ATTENTION : APPAREILCOMMANDI_ AUTOMATIQUEMENT. AFIN DE

RI_DUIRE LES RISQUES DE BLESSURE,DI_BRANCHEZ L'APPAREIL DE L'ALIMENTATION

I'--LECTRIQUE AVANT DE PROCI_DER A UNE

RI_PARATION. L'APPAREIL EST I_QUlPI_ D'UNSECTIONNEUR INTI_GRAL SITUE A L'INTI_RIEUR

DU LOGEMENT DU VENTILATEUR. 13

Page 14: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Commandes et param6tres

Hotte encastrable et adaptable

Commandes NOTE : Evitez les produits alimentaires qui

produisent des flammes sous la hotte.

1. FAN DECREASE ONIOFF (Diminution de la

vitesse du ventilateur marchelarr_t). Appugez

sur ce bouton pour allumer le ventilateur etdiminuer sa vitesse. Le dernier palier de vitesse

est gard_ en m_moire. Les boutons vous

permettent de progresserjusqu'5 la vitessed_sir_e. (Utilisez-les pour r_gler la vitesse duventilateur sur LOW, MED, HIGH, BOOST ou OFF.)

2. FAN INCREASE ON/OFF (Augmentation de lavitesse du ventilateur marche/arr_t). Appugez

sur ce bouton pour allumer le ventilateur et

augmenter sa vitesse. Le dernier palier de

vitesse est gard_ en m_moire. Les boutons vouspermettent de progresserjusqu'5 la vitesse

d_sir_e. (Utilisez-les pour r_gler la vitesse duventilateur sur LOW, P1ED,HIGH, BOOST ou OFF.)

SONDE DE TEMPI_RATURE--Le ventilateur de

hotte s'allumera automatiquement au r_glageNED si la temperature de cuisson devient trop

chaude. Le ventilateur restera allum_ pendant

3 minutes au minimum, et il s'_teindra Iorsquela temperature refroidira 5 un niveau appropri_.

3° LIGHT DECREASE ONIOFF (Diminution de

l'_clairage marchelarr_t). Appugez sur cebouton pour allumer les lampes et en diminuer

I'intensit_. Le dernier niveau d'_clairage est

gard_ en m_moire. Les boutons vous

permettent de progresserjusqu'au r_glaged_sir_. (Quatre niveaux/param_tres de

luminosit_ sont disponibles ainsi que OFF [arr_t].)

4° LIGHT INCREASE ON/OFF (Augmentation de

I'_clairage marche/arr_t). Appugez sur ce

bouton pour allumer les lampes et en

augmenter I'intensit_. Le dernier niveaud'_clairage est gard_ en m_moire. Les boutons

vous permettent de progresserjusqu'au r_glaged_sir_. (C)uatre niveaux/param_tres de

luminosit_ sont disponibles ainsi que OFF [arr_t].)

S° POWER ONIOFF (Mise sous tension

marchelarr_tl. Appugez sur ce bouton pouractiver (allumer)/d_sactiver (_teindre)les

boutons de commonde. Lorsque les boutonssont octifs (ollum@s), leur onneoux externes

sont illumin@s. Lorsqu'ils sont octiv@s (ollum@s),

les Iompes et le ventiloteur s'ollument

outomotiquement 5 leurs derniers r@gloges.

OFAN

1 2

Monogramo

LIGHT

3 4 5

NOTES :

• Veillez _ toujours d@soctiver(@teindre)lesboutons si vous ne comptez pos utiliser Iohotte.

• Si les deux boutons LIGHT (Iompe) et FAN

(ventiloteur) sont r@gl@s5 OFF (orr@t),les

boutons seront outomotiquement d@soctiv@s(@teints) ou bout de 10 secondes.

14

Page 15: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Entretien et nettogoge

Hotte encastrable et adaptable

Pour votresdcurit4

Avant de r_parer ou de nettoger I'appareil,mettez-lehors service_]I'aidedu tableau de commande et

verrouillez-leafin d'_viter que I'alimentation nes'enclenchement par inadvertance. Si le tableau nepeut _tre verrouill_,fixez une _tiquette ou _tiquetted'avertissement bien apparente sur le tableau.

Filtresm tolliques

groisse

Les filtres m_talliques retiennent Io graisse lib_r_epar les aliments sur la table de cuisson. Les filtresemp_chent aussi les flammes (provenant desaliments, de la graisse) d'endommager I'int_rieurde la hotte.

Pour cette raison, les filtres doivent TOUJOURS_treen place Iorsque la hotte est utilis_e. Les filtresgraisse doivent _tre nettog_s tousles 6 mois, ouau besoin.

Pour le retirer :

Tenezle filtre d'une main tout en tirant I'agrafe dufiltre vers le bas avec I'autre main. Rabattez et tirezle filtre.

Pour le remplacer :

1. Inclinez le filtre, ins_rez-le dans les fentes delanguette _ I'arri_re, puis soulevez-le.

2. Tout en maintenant une I_g&repression sur lefiltre, ouvrez I'agrafe et poussez le filtre en placeI'aide des deux mains.

Pour le nettoger, trempez le filtre dans de I'eauchaude savonneuse et rincez _ I'eaufroide ou

lavez-le dans le lave-vaisselle. N'utilisez pas denettogants abrasifs.

\

15

Page 16: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Entretien et nettogoge

Hotte encastrable et adaptable

Surfacesde la hotteen acierinoxgdable

N'utilisez pas des tampons 6 r_curer en acier; ilsvont rager la surface.

Pour nettoyer la surface en acier inoxydable,utilisez de I'eau chaude savonneuse ou un

nettoyant ou p6te _ polir pour acier inoxydable.Nettoyez toujours la surface dans la direction dugrain. Suivez les instructions du produit denettoyage de la surface en acier inoxydable.

Poursavoir comment vous procurer un produit denettogage pour _lectrom_nager en acierinoxgdable, ou pour connaTtreI'adresse duconcessionnaire le plus pros de chez vous, veuillezcomposer notre num_ro sans frais :

Centre national de pi_ces : 800.626.2002

monogram.com

Ampoules Pour remplacer les ampoules :

1. Agrippez la garniture ext_rieure et tournez-lajusqu'_ atteindre la position de d_verrouillage.Tirez ensuite sur la garniture en ligne droite.

.

3.

Agrippez I'ampoule et tournez-la jusqu'_ atteindrela position de d_verrouillage. Tirez ensuited_licatement sur I'ampoule en ligne droite.

Remplacez I'ampoule par une autre de m_mestgpe, taille et puissance (watts). Portez des gants.Ne touchez pas _ I'ampoule avec les mains nues.

Cesampoules halog&nes de 120 volts, 50 watts,base GU10 sont disponibles dans les magasins deluminaires et les centres de r_novation.

. Replacez la garniture ext@rieureen ins@rantlesdeux languettes de retenue dans les deux fentescorrespondantes, en pressant sur la garniturepour la placer au niveau de la surface de la hotteet en la tournant pour atteindre la position deverrouillage.

16

Page 17: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Utilisez ce

sgstSme der6solution

de

problSme !

Ce sgst me de r solution de probl me

Hotte encastrable et adaptable

PROBLI_ME

LE VENTILATEUR S°ALLUME

AUTOMATIQUEMENT ET

NE PEUT _:TREI:TEINT

LE VENTILATEUR NE

FONCTIONNE PAS Mr:ME

ALLUMI_

LE VENTILATEUR NE FAIT

PAS CIRCULER L'AIR OUDISPLACE L'AIR PLUS

LENTEMENT OUE LANORMALE

LE VENTILATEUR NE CESSEDE S'I_TEINDRE ET DE

S°ALLUMER

LA LAHPE NE RESTERAPAS SUR LE NIVEAU I_LEVI_

LES COMMANDES DE LA

HOTTE NE FONCTIONNENT

PAS CORRECTEMENT

SI VOUS APPUYEZ

PLUSIEURS FOIS SUR LES

BOUTONS DE LA LAMPE

OU DU VENTILATEUR, LESRI_GLAGESCHANGERONT

PARFOIT DU NIVEAU LE

PLUS BAS AU NIVEAU OFF

AU NIVEAU LE PLUS I_LEVI_,OU DU PLUSI_LEVI_AU

NIVEAU OFF AU NIVEAU

LE PLUS BAS

LORSOUE VOUS APPUYEZSUR LE BOUTON

POWER ON/OFF POUR

ALLUMER LA LAMPE,LE VENTILATEUR

S°ENCLENCHE

CAUSES POSSIBLES

La sonde de temperature d_clenche automatiquement le ventilateurau r_glage HED si la temperature s'_l_ve trop. Le ventilateur resteraallum_ pendant 3 minutes au minimum, et il s'_teindra Iorsquela refroidira _ un niveau appropri_.

• II se peut qu'un fusible soit grill_ ou qu'un disjoncteur soit enclench_.Remplacez le fusible ou r_glez _ nouveau le disjoncteur.

• Le commutateur de la hotte peut _tre _teint. Retirez les filtresm_talliques _ graisse et enclenchez le commutateur.

V_rifiez les filtres m_talliques 6 graisse sont propre. Nettogez lesfiltres m_tallique _ graisse (voir le section Filtres m_tolliques _ groisse).Si malgr_ le nettogage des filtres le probl_me persiste, appelez leservice d'assistance.

Le moteur surchauffe probablement et s'_teint. Ceci risqu_d'endommager le moteur. V_rifiez que les filtres sont propre.Si le probl_me persiste, appelez le service d'assistance.

Utilisez des ampoules halog&nes de tgpe 3_20volts, 50 watts, desampoules halog_nes _ culot GU3_0et assurez-vous qu'elles ont _t_correctement introduites. Consultez la section Ampoules.

Coupez I'alimentation de la hotte en d_sactivant le disjoncteur ou enretirant le fusible de la boTte_ fusibles de votre domicile. Patientez30 secondes pour que les commandes de la hotte se r_initialisent,puis replacez le fusible et enclenchez _ nouveau le disjoncteur.

II est normal que les boutons d'_clairage ou de ventilateur progressentd'un r_glage _ I'autre afin que vous puissiez choisir ais_mentle r_glage d_sir_.

Pour votre confort, les lampes et le ventilateur se souviennent dudernier r_glage Iorsque vous appugez sur le bouton Power On/Off.Si vous souhaitez allumer uniquement les lampes, appugez surle bouton FAN+(ou sur FAN-)jusqu'_ _teindre le ventilateur. Lorsquevous rallumerez la hotte, les lampes seront les seules _ fonctionner.

3_7

Page 18: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Notes

Hotte encastrable et adaptable

18

Page 19: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Service au consommateur

Hotte encostroble et odoptoble

Avec I'achat de votre nouvel appareil Monogram, sogezassur@ de recevoir toute I'information ou I'assistance dont

vous pourriez avoir besoin, de la part de 6E. Tout ce que vousavez _ faire, c'est de nous appeler--gratuitement !

GE AnswerCenter ®

800.561.3344

Quelle que soit votre question concernant n'importe quel appareil Monogram, le serviced'information du GEAnswer Center®est disponible pour vous aider. Votre appel-et votre question-seront pris en compte rapidement et courtoisement. Le service GEAnswer Center®est ouvert lundiau vendredi, de 08h00 _ 22h00 et samedi, de 08h00 _ 19h00 EDST.

OU

Visitez notre site web sur : monogram.com

Service favori

Monogram

800.561.3344

Un professionnel qualifi_ du service GE s'occupera de lar_paration, _ un moment qui vousconvienne. La plupart des entreprises du service GEvous proposent une intervention lejourm_me ou le lendemain, ou _ votre convenance (lundi au vendredi, de 07h00 _ 22h00 et lessamedis et dimanches, 08h00 _ 18h00 EDST).Nos techniciens form,s en usine connaissentI'int_rieur et I'ext_rieur de votre appareil-la plupart des r_parations peuvent _tre effectu_es enune intervention seulement.

Pour les clientsavec desbesoinssp@ciaux...

Aux E-tats-Unis800.626.2000

71 .........1 71_

S_c--r,ON A.._

GEoffre gratuitement une brochure pour aider _ la planification d'unecuisine sans entrave pour les personnes _ mobilit4 r4duite.

Les consommateurs malentendants ou muets qui ont acc_s _ un TDDou _ un t@l@scripteurconventionnel peuvent appeler le 800.TDD.GEAC(800.833.4322) pour solliciter information ou service.

Contratsde service

800.561.3344

Vous pouvez @trerassur@de savoir que le service GEsera toujours I_ apr@sI'expiration de votregarantie. Souscrivez _ un contrat GEpendant que votre garantie est toujours en vigueur et vousb@n4ficierezd'une ristourne substantielle. Avec un contrat sur plusieurs ann4es, vous @tesassur@d'un futur service au prix d'aujourd'hui.

Pi@cesd@tach@es etaccessoires

800.561.3344

Les personnes qualifi_es pour r_parer leurs propres appareils peuvent commander des pi@cesd@tach@eset des accessoires et se les faire envoyer directement _ domicile. Lesyst@mede pi@cesd@tach@esGEpropose un acc@s_ plus de 47 000 pi@ces..,et toutes les pi@cesde rechanged'origine GEb@n@ficientd'une garantie [email protected] cartes bancaires VISA,MasterCard etDiscover sont accept@es.

Les instructions de maintenance contenues dans ce manuel d_taillent les proc@dures 6utiliser par n'importe quel utilisateur. Toute autre r@parationou intervention doit _treeffectu_e par un technicien qualifi_. La prudence est n_cessaire, car une r_parationincorrecte peut provoquer un fonctionnement dangereu× de I'appareil.

19

Page 20: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Garantie

Hotte encastrable et adaptable

GARANTIE DE VOTRE HOTTEAgrafez ici le cheque annul_ ou le re_u de votre achat.La preuve d'achat originale sera n_cessaire pour b_n_ficierdu service apr_s-vente pendant la p_riode de garantie.

CE QUI ESTCOUVERT

GARANTIELIMITI_ED'UN ANPendant une ann@e@compter de la date d'achat originale, nous fournirons gratuitement lespi@ceset la main-d'oeuvre @votre domicile, pour r_parer ou remplacer n'importe quelle partiede la hotte qui serait d@fectueuse@cause d'un d@fautde fabrication.

Cette garantie est _tendue _ I'acheteur original et _ tout propri@taire successif pour les appareilsachet_s pour un usage domestique ordinaire dans les 48 Etats continentaux, _ Hawaii,Washington D.C.ou au Canada. Si cet appareil est install@ dans un endroit o0 il n'existe pas deservice agr_ GE, vous pouvez avoir _ prendre en charge les frais de transport, ou il peut vous _tredemand@ d'apporter I'appareil clans un service GE agr_ pour r@aration. En Alaska, la garantie estla m@me,saul qu'elle est LIMITEE parce que vous devez prendre en charge les frais de transportau magasin ou les frais de d@placement du technicien du service _ votre domicile.

Tousles services de garantie sont fournis par nos centres de service d'usine, ou par un technicienCustomer Care ®agree, pendant les heures de travail normales.

Dans le cas o0 votre appareil n@cessiterait une intervention, pendant la p_riode de garantie ou au-del6, appelez le 800.444.1845 aux t_tats-Unis. Au Canada, appelez le 800.561.3344. Munissez-vousdu num@ro de mod@le et du num@ro de s_rie Iors de votre appel au service apr_s-vente.

CE QUI N'ESTPAS COUVERT

• Les d_placements 6 domicile pour vous

apprendre 6 utiliser I'appareil.

• Le remplacement des fusibles du domicile

ou la r_initialisation des disjoncteurs.

• Un dommage annexe ou cons_cutif provoqu_

par d'_ventuels d_fauts de cet appareil.

• Remplacement des filtres jetables.

• Un dommage de I'appareil provoqu_ par unaccident, un incendie, une inondation ou un

cas de force majeure.

• Un dommage provoqu_ apr_s la livraison.

• Une panne de I'appareil dans le cas d'une

utilisation autre que celle pr_vue, ou d'uneutilisation commerciale.

• Une installation incorrecte.

Si vous rencontrez un probl_med'installation, contactez votre revendeur ou

votre installateur. Vous _tes responsable de

la fourniture appropri_e d'_lectricit_, de gaz,d'_vacuation et d'autres raccordements,

comme indiqu_ dans les instructions

d°installation fournies avec votre produit.

• Un appareil non accessible pour ex_cuter

la r_paration n_cessaire.

EXCLUSION DES GARANTIES IMPLICITES - Votre seul et unique recours r_sideduns la r_paration de I'appareil telle qu'erie est d_finie dans cette garantielimit_e. Toutes autres garanties implicites, g compris les garanties implicites devaleur commerciale ou d'ad_quation 6 un usage particulier, sont limit_es 6 uneannie ou 6 la plus petite p_riode autoris_e par la Ioi.

Certains _tats/provinces n'autorisent pas I'exclusion ou la limitation des dommages fortuits ouindirects, par consequent la limitation ou I'exclusion ci-dessus peut ne pas s'appliquer 6 vous. Cettegarantie vous donne des droits I@gaux particuliers et il est possible que vous puissiez b_n@ficierd'autres droits, qui varient d'un _tat/province _ I'autre.

Pour connaitre quels sont vos droits I@gaux dans votre _tat/province, consultez le bureau de serviceaux consommateurs local ou national ou le minist_re de la Justice.

Garant aux I_tats-Unis : General Electric Compang. Louisville, KY 40225

Garant au Canada : Mabe Canada Inc.20

Page 21: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Informaci6n para el consumidor

Campana a medida

Contenidos Servicios para el consumidorGarant[a ...................................... 32Instrucciones de seguridad ................... 23N0mero de modelo g de serie ................ 21N0meros telef6nicos importantes ............ 31Solucionador de problemas ................... 27

Controles g caracteristicas ................... 2/4

Cuidado g limpiezaBombillas de luz ............................... 26Filtros de grasa de metal ...................... 25Superficiesde acero inoxidablede la campana ... 26

Antes deutilizar su

campanaa medida

Lea este manual con detenimiento. Su objetivoes agudarlo a operar g mantener su nuevocampana a medida de una manera adecuada.

Mant6ngalo a mano para responder suspreguntas.

Si no entiende algo o necesita m6s aguda, haguna lista de n0meros gratuitos de atenci6n alcliente en la secci6n trasera de este manual.

O

Visite nuestro sitio Web: monogram.com

Escriba losnOmerosde modelog de serie

Usted puede encontrarlos en una etiqueta detr(isde los filtros desmontables.

Estos n0meros tambi6n se encuentran en laTarjeta de Registro de Propiedad de Productoembalada en forma separada con su campana.

Viste monogram.com g haga clic en "Registresu artefacto" para registrar su campana dechimenea.

Antes de enviar la tarjeta, tenga a bien escribirlos n_meros aqui:

N0mero de modelo

N0mero de serie

Utilice estos n0meros en cualquiercorrespondencia o Ilamadas de servicio t@cnicorelacionadas con su campana.

Si ustedrecibi6 un

campanadahado

Comun[quese de inmediato con el vendedor(o constructor) que le vendi6 el campana.

21

Page 22: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Informaci6n para el consumidor

Campana a medida

Ahorre

tiempo gdinero

Antes de solicitar servicio t6cnico, verifique elSolucionador de problemas ubicado en la partetrasera de este manual.

Incluge una lista de problemas operativos menoresque usted Duedecorregir solo.

Si necesitaserviciot6cnico

Para obtener servicio t6cnico, dirfjase a la p6ginade Servicios para el consumidor en la partetrasera de este manual.

Estamos orgullosos de nuestro servicio gdeseamos que usted quede satisfecho. Si poralguna raz6n no est6 satisfecho con el servicioque recibe, aqu[ incluimos algunos pasos aseguir para obtener m6s ayuda.

PRIMERO,contacte a las personas que realizaronel servicio en su artefacto. Explique por qu6 noest6 satisfecho. Enla magorfa de los casos, estosolucionar6 el problema.

DESPUES,sl a0n ad no est6 satisfecho, escribatodos los detalles-inclugendo n0merotelef6nico-a:

Manager, Customer RelationsGEAppliancesAppliance ParkLouisville, KY/40225

22

Page 23: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

INSTRUCCIONESIMPORTANTE DE SEGURIDADLEA TODAS LAS INSTRUCCIONESANTES DE USAR

PRECAUCIONES DE SEGURIDAD

-& ADVERTENCIA:PARAREDUCIREL RIESGO DE INCENDIOS, DESCARGASELI'-_-CTRICASO LESIONES PERSONALES, OBSERVELO SIGUIENTE:

A. Useeste unidad solomente de la monero qua elfabricante Io indique. Siusted tiene preguntas, p6ngaseen contacto con el fabricante.

B.Antes de proporcionar servicio o de limpiar la unidad,desconecte el suministro el_ctrico en el panel deservicio g cierre el mecanismo de seguridad para evitarque alguien Io conecte accidentalmente. Cuando noexista un dispositivo de cierre de seguridad, amarre unaviso visible, coma una etiqueta al panel de serviciohacienda la advertencia.

C.No use esta unidad con ningOn dispositivo de controlde velocidad de estado s61ido.

D. Estaunidad debe estar conectada a tierra.

-_ PRECAUCION:PARAUSODEVENT_LAa_NGENERALSOLA.ENTENOUSEPARA EXPULSAR MATERIALESPELIGROSOS O

EXPLOSIVOS Y VAPORES.

-A ADVERTENCIA:PARAREDUCIREL RIESGO DE LESIONES PERSONALES EN EL CASODE UN INCENDIO DEBIDO A GRASA DE ESTUFA

QUEMADA, HAGA LO SIGUIENTE*:

A.CONTENGALASLLAMAScon una tapa que ajuste biensabre la sart@n,con una 16minapara hacer dulces ocon una bandeja met61ica,g luego apague elquemador. TENGACUIDADODENOOUEMARSESi lasllamas no se apagan inmediatamente, EVACUEELLUGARY LLAIVlEAL DEPARTAMENTODEBOIVIBEROS.

B. NUNCAAGARREUNASARTI_N0 UNAOLLAQUESEENCUENTREENLLAMAS--Sepodria quemar.

C.NO USEAGUA,inclugendo paBos de cocina o toallashumedecidas-esto har6 que ocurra una explosi6n devapor violenta.

D. Useun extintor SOLAMENTEsi:

1. Ustedsabe que tiene un extintor ClaseABC,g siusted ga sabe c6mo operarlo.

2. Elfuego es pequeho g est6 contenido al 6rea dondecomenz6.

3. Eldepartamento de bomberos ha sido Ilamado.

4. Ustedest6 luchando contra las llamas con susespaldas hacia una salida.

* Basado en "Ideas para la seguridad en la cocina",publicado par NFPA.

LEA V SIGAESTAS INSTRUCCIONES.

-& ADVERTENCIA:PARAREDUCIREL RIESGO DE UN FUEGO DE GRASA DE ESTUFA:

A. Nunca deje unidades de superficies sin la atenci6ndebida enselecciones altas. Cuando se est6 hirviendo

algo y ocurren derramamientos, estos podrian causarhumo y que losderramamientos grasosos se incendien.Caliente los aceites lentamente a selecciones medias

y bajas.

B. Siempre encienda la campana cuando cocine a fuegoalto o cuando flambee alimentos (CrepesSuzette,CherriesJubilee, Flambeado de Came con Pimienta).

C.Limpie el ventilador con frecuencia. Lagrasa no debeacumularse en el ventilador o en elfiltro.

D. Useuna sart_n de tama_o apropiado. Siempre usepiezas de cocina apropiadas para el tama_o delelemento de la superficie.

-_ ADVERTENCIA:PARAREDUCIREL RIESGODE INCENDIOS, DESCARGASELI_CTRICASO LESIONESPERSONALES,OBSERVE LO SIGUIENTE:

A. Eltrabajo de instalaci6n g elalambrado el_ctrico debehacerlo una persona(s)calificada conforme a todos losc6digos g estcindaresaplicables, inclugendo unaconstrucci6n aprobada por el inspector de incendios.

B. Suficienteaire es necesario para una combusti6napropiada g para deshacersede losgases a tray,s deuna salida de humo (chimenea)de equiposque quemancombustibles para prevenir retroalimentaci6n. Siga lasrecomendaciones del fabricante del equipo decalentamiento g losestcindaresde seguridad talescomolospublicados por la Asociaci6n nacional de protecci6nde incendios (NFPA),g la Sociedadamericana deingenierosdecalefacci6n, acondicionadores de aire grefrigeraci6n (ASHRAE),g losc6digos de lasautoridadeslocales.

C.Cuando se encuentre cortando o taladrando en la

pared o en eltecho, no daBe los alambrados el@ctricosu otras utilidades escondidas.

D. Losventiladores con conductos deben estar siempreventilados hacia el exterior.

-& ADVERTENCIA:PARAREDUCIREL RIESGO DE INCENDIOS, SOLAMENTE USECONDUCTOS MET/_LICOS.

• No intente reparar o reemplazar ninguna parte de sucampana a no ser que Io recomiende espedficamenteeste manual. Cualquier otro servicio debe ser referido aun t@cnicocalificado.

A PRECAUCION:DISPOSITIVOOPERADO AUTOM/_TICAMENTE. PARA REDUCIR

EL RIESGO DE LESIONES, DESCONECTE DE LAFUENTE DE ENERGiA ANTES DE EFECTUARREPARACIONES. LA UNIDAD SE ENCUENTRA

EQUIPADA CON UN INTERRUPTOR DEDESCONEXION INTEGRAL UBICADO DENTRODEL CUERPO DEL VENTILADOR.

23

Page 24: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Controles g caracteristicas

Compono o medido

Controles NOTA: No utilice elementos que producen llamas

bajo la campana de cocina.

1.

2o

3o

4o

FAN DECREASE ON/OFF (Disminuci6n de

ventilador encendido/apagado). Presione para

encender g disminuir las configuraciones delventilador. Vuelve al Oltimo nivel de ventilador

utilizado. Los botones le permiten desplazarsehasta la configuraci6n deseada. (Utilice para

configurar la velocidad del ventilador en LOW

(baja), MED (media), HIGH (alta), BOOST (impulso)

o en OFF (apagado).

So

FAN INCREASE ON/OFF (Aumento de

ventilador encendido/apagado). Presione para

encender g aumentar las configuraciones delventilador. Vuelve al Liltimo nivel de ventilador

utilizado. Los botones le permiten desplazarse

hasta la configuraci6n deseada. (Utilice paraconfigurar la velocidad del ventilador en LOW(baja), MED (media),HIGH (alta),BOOST (impulso)o en OFF(apagado).

CARACTERiSTICA DE SENSOR--El ventilador

de lu cumpanu se enciende uutom6ticumente

en Io configuraci6n MED si los temperaturusde cocci6n se elevan demasiudo. El ventiludor

permanecer6 encendido par un mfnimo de

3 minutos g luego se apagur6 cuundo lustemperaturas bajun a un nivel upropiudo.

LIGHT DECREASEON/OFF (Disminuci6n de luzencendido/apegado). Presione para encender gatenuar las luces. Vuelve al 01timonivel de luzutilizado. Los botones le permiten desplazarsehasta la configuraci6n deseada. (Existencuatroniveles de luz/configuraciones g apagado [OFF]).

LIGHT INCREASEON/OFF (Aumento de luzencendido/apagedo). Presione para encender gaumentar las luces, Vuelve al 01timonivel de luzutilizado. Los botones le permiten desplazarsehasta la configuraci6n deseada. (Existencuatroniveles de luz/configuraciones g apagado [OFF]).

POWER ON/OFF (encendido/apagado).

Presione para activar (encender)/desactivar

(apagar) los botones de control. Cuando losbotones se encuentran activos (encendidos), losanillos exteriores se iluminarc_n. Cuando se

encuentran activos (encendidos), las luces de la

campana g ventilador se encenderc_nautom6ticamente en sus 01timas

configuraciones.

OFAN

1 2

Monogramo

LIGHT

3 4 5

NOTES:

• Siempre desactive (apague)los botonescuando no est6 usando la campana.

• Si la luz (LIGHT)g el ventilador (FAN)se apagan(OFF),los botones se desactivar(_n(apagar(_n)autom(Xicamente despu@sde 10 segundos.

24

Page 25: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Cuidado y limpieza

Campana a medida

Para su

seguridad

Antesde realizar reparacioneso limpiar la unidad,desconecte la energia desde el panel de servicio ybloquee _ste Oltimopara evitar el accionamiento dela energia de manera accidental. Siel panel deservicio no puede bloquearse,coloque una etiquetao cartel de advertencia sabre el panel.

Filtros de

grasa demetal

Los filtros de metal atrapan la grasa liberada porlos alimentos desde la estufa. Losfiltros tambi@nayudan a evitar que las llamas (de los alimentos,grasa) dahen la parte interna de la campana.

Por esta raz6n, los filtros deben SIEMPREestar en sulugar cuando la campana est_ en uso. Losfiltros degrasa deben limpiarse cada 6 meses,o segOnseanecesario.

Para retirar:

Sostenga el flltro con una mano mientras tira delgancho del filtro con la otra. Tire del filtro haciaabajo y quftelo.

Para reemplazar:

1. Incline el filtro dentro de las ranuras de lengOetatraseras y lev6ntelo.

2. Mientras mantiene una leve presi6n ascendentesobre el filtro, abra el gancho Ycol6quelo en sulugar con ambas manos.

Limpie el filtro en agua jabonosa caliente Yenjuague con agua limpia o 16veloen el lavavajillas.No utilice productos de limpieza abrasivos.

Gancho_

25

Page 26: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Cuidado y limpieza

Campana a medida

Superficiesde aceroinoxidablede la

campana

No utilice almohadillas de acero ga que ragan lasuperficie.

Para limpiar la superficie de acero inoxidable,utilice agua tibia jabonosa o un limpiador olustrador de acero inoxidable. Siempre limpie lasuperficie en direcci6n de la veta. Siga lasinstrucciones del producto para limpiar lasuperficie de acero inoxidable.

Paraconsultar sobre la compra de limpiadores olustradores de aparatos de acero inoxidable, opara encontrar la ubicaci6n del distribuidor m6scercano, Ilame a nuestro nOmero gratuito:

Centro nacional de repuestos 800.626.2002

monogram.com

Bombillasde luz

Para cambiar las bombillas de la luz:

1. Tome el anillo exterior y gfrelo hasta alcanzar laposici6n de destrabado. Luego tire del anillo haciaafuera.

2. Tome la bombilla y gkela hasta alcanzar laposici6n de destrabado. Luego tire suavementede la bombilla hacia afuera.

3. Reemplace con una bombilla del mismo vataje,tipo y tamano. Utilice guantes. No toque labombilla con las manos desnudas.

.

Estas bombillas hal6genas de 120 voltios, 50vatios, con una base GUIO se encuentrandisponibles en tiendas especializadas deiluminaci6n y centros de construcci6n.

Reemplace el anillo exterior introduciendo las doslengOetasde retenci6n dentro de las dos ranuraspara leng(Jetas,presionando el anillo hasta quequede nivelado con la superficie de la campana ygir6ndolo hasta que alcance la posici6n detrabado.

26

Page 27: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Questions?Use this

problemsolver!

The Problem Solver

Campana a medida

PROBLEM

EL VENTILADOR

SE ENCIENDE

AUTOM/_TICAM ENTE Y

NO PUEDE APAGARSE

EL VENTILADOR NO

FUNCIONA CUANDO SE

LO ENCIENDE

EL VENTILADOR NO

CIRCULA EL AIRE OMUEVE EL AIRE MAS

LENTAMENTE QUELO NORMAL

EL VENTILADOR SE

ENCIENDE Y APAGA

TODO SIN PARAR

LA LUZ NO SE MANTIENEEN LA CONFIGURACI6N

ALTA

LOS CONTROLES DE LA

CAMPANA NO FUNCIONAN

CORRECTAMENTE

SlSEPRESIONANCONSECUTIVAMENTELOSBOTONESDELUZO DELVENTILADOR,CAMBIARAA VECESLA CONFIGUACI6NDE LAM/_SBAJAA APAGADOA LA CONFIGURACI6NM/_SALTA,O DE LAM/_SALTAA APAGADO,A LACONFIGURAClONMASBAJA

CUANDO SE PRESIONA EL

BOT6N POWER ON/OFF

(ENCENDIDO/APAGADO)

PARA ENCENDER LA LUZ,EN SU LUGAR SE

ENCIENDE EL

VENTILADOR

POSSIBLECAUSE

La caracterfstica de sensor se enciende autom(iticamente en la

configuraci6n MEDsi las temperaturas de cocci6n se elevanelevan demasiado. Elventilador permanecer6 encendido porun mfnimo de 3 minutos g luego se apagar(i cuando las temperaturasbajen a un nivel apropiado.

El fusible puede haberse quemado o el disguntor puede habersaltado. Cambie el fusible o vuelva a configurar el disguntor.

El interruptor de desconexi6n de energfa ubicado dentro de lacampana puede estar apagado. Quite el filtro de grasa de metalg accione el interruptor.

Aseg0rese de que los filtros de grasa de metal est_n limpio.Limpie los filtros de grasa de metal (ver la secci6n Filtros de grosode metal). Si la limpieza g el recambio de filtros no corrigenel problema, Ilame al servicio t@cnico.

El motor probablemente se est(i sobrecalentando g se apaga solo.Esto puede danar el motor. Aseg6rese de que el filtro est@n limpio.Si contin0a el ciclo de apagado g encendido, Ilame al servicio t@cnico.

Utilice bombillos hol6genos de 120 voltios, 50 votios, con unobase GU10 g aseg0rese de que est@nbien colocadas. Ver la secci6nBombillos de luz.

Desconecte la energfa de la campana apagando el disguntor oquitando el fusible de la caja de fusibles. Espere 30 segundos paraque los controles de la campana se reconfiguren g luego cambie elfusible o vuelva a activar el disguntor.

Es normal que los botones de luz g del ventilador le permitandesplazarse de posici6n para que usted pueda configurar f(icilmentelos controles en su configuraci6n deseada.

Para su comodidad, es normal que las luces g el ventilador"recuerden" su 01tima configuraci6n cuando presiona el bot6nPower On/Off. Si s61odesea encender las luces, presione el bot6n"FAN+" (ventilador +)(o el "FAN-")(ventilador -) para apagar el ventilador.Cuando vuelva a encender la campana, s61ofuncionardn los luces.

27

Page 28: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Notas

Compono o medido

28

Page 29: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Notas

Compono o medido

29

Page 30: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Notas

Compono o medido

30

Page 31: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Servicios olconsumidor

Compono o medido

Con la compra de su nuevo artefacto Monogram, tenga latranquilidad de que si alguna vez necesita informaci6n oasistencia de GE, estaremos listos para hacerlo, iTodo Io quetiene que hacer es Ilamar en forma gratuita!

GE AnswerCenter ®

800.626.2000

Cuondo tengo uno consulto sobre cuolquier ortefocto importonte Monogrom, el servicio deinformoci6n GEAnswer Center® estor6 listo poro ogudorlo. Su Ilomodo-g su pregunto-ser6nrespondidos r6pido g cort@smente. Elservicio GEAnswer Center® est6 obierto 8 o.m. o10 p.m. ESTlunes o viernes, 8 o.m. o 7 p.m. ESTs6bodos.

O

Visite nuestro sitio web: monogram.com

ServiciopreferidoMonogram

800.444.1845

Un profesionol de servicio t@cnicode GE le brindor6 un servicio de reporoci6n experto,progromodo en un momento que resulte conveniente poro usted. Muchos Iocociones operodospor Io componfo de servicio t@cnico de GEle ofrecen un servicio en el dfo o ol dfo siguiente, ocuondo seo conveniente poro usted (7 o.m. o 10 p.m. ESTlunes o viernes, 8 o.m. o 6 p.m. ESTs6bodos g domingos). Nuestros t@cnicoscopocitodos en Io f6brico conocen el ortefocto porcompleto, osf que Io mogor porte de los reporociones puede efectuorse en s61ouno visito.

Para clientescon necesidadesespeciales...

800.626.2000

71 .........1 /1_

SE_ION A-_

GE leofrece,en formagratuito,un folletoporaayudoro planificoruna

cocinalibrede borrerosparopersonascon movilidadlimitado.

Los consumidores con problemos ouditivos o de hoblo que tienen occesoo un TDD (tel@fonoporo sordomudos) o un teletipo convencionol puedenIlomor ol 800.TDD.GEAC(800.833.4322) poro solicitor informoci6n oservicio t@cnico.

Contratos deservicio t@cnico

800. 626.2224

Usted puede estor tronquilo de que el Servicio T@cnicode GEestor6 ollf poro ogudorlo cuondofinolice su gorontfo. Adquiero un controto GEmientros su gorontfo sigue vigente g recibir6 undescuento sustonciol. Con un controto de vorios o_os, usted se oseguro servicio t@cnicofuturocon los precios de hog.

Piezas gaccesorios

800.626.2002

Las personas calificadas para arreglar sus propios artefactos pueden recibir las piezas ooccesorios directomente en sus hogores. Elsistemo de piezos de GEofrece occeso o m6s de/47.000repuestos...g todos los Piezosde Repuesto Genuinos de GEtienen gorontfo totol. Seoceptontorjetos VISA,MosterCord g Discover.

Las instrucciones de mantenimiento del usuario incluidas en este manual cubren losprocedimientos a realizar por cualquier usuario. Cualquier otra clase de arreglos deben serefectuados por personal de servicio t_cnico calificado. Debe tenerse mucho cuidado, porquelos arreglos inadecuados pueden provocar un funcionamiento poco seguro.

31

Page 32: Custom Hood Insertsmonogram.com Light bulbs Tochange the light bulbs: 1. Graspthe outer trim ring and twist until reaching the unlock position.Then pull the ring straight out. 2. Graspthe

Garantia

Campana a medida

GARANTiA DE SU CAMPANA MONOGRAMAbroche el comprobante de venta o cheque compensadoaquL Se necesita una prueba de la fecha de compra originalpara obtener servicio t_cnico cubierto par la garantia.

ELEMENTOS

CUBIERTOS

GARANTiA LIMITADADE UNO ARIODurante un aflo a partir de la fecha original de compra, otorgaremos, en forma gratuita, piezasy servicio t_cnico en su hogar para reparar o reemplazar cualquier parte de su campana quefalle debido a defectos en la fabricaci6n.

Esta garantia se extiende al comprador original U cualquier dueflo posterior para productosadquiridos para uso dom_stico dentro de los 48 estados continentales, Hawai, Washington, D.C.oCanad6. Siel producto se encuentra en una regi6n donde no hau ServicioT_cnico de GE,usted ser6responsable del cargo del viaje ousted puede tenet que Ilevarel producto a un ServicioT_cnicoAutorizado de GEpara efectuar la reparaci6n. EnAlaska la garantia es la misma salvo que esLIMITADAporque usted debe pagar el envfo del producto a la tienda de servicio t_cnico o los gastosde viaje del t_cnico hasta su hogan

Todo el servicio de garantia debe suministrarse por parte de nuestros Centros de Servicio de F6bricao por t_cnicos autorizados de Customer Care®durante un horario normal de trabajo.

Si su artefacto requiere servicio t_cnico, durante el perfodo de garantia o despu@s del mismo, en losEE.UU. Ilame al 800.444.1845. En Canad6: 800.561.3344. Tenga el nOmero de serie U de modelo amano cuando Ilame para solicitar un servicio t_cnico.

ELEMENTOS

NO CUBIERTOS

• Visitas a su hogar para enseSarle a usar el

producto.

• Reemplazo de fusibles dom_sticos o la

reconfiguraci6n de disguntores.

• DaSos incidentales o resultantes provocados

por posibles defectos en este artefacto.

• Recambio de los filtros reemplazables.

• Da5os al producto provocados por

accidentes, incendios, inundaciones o fuerza

magor.

• DaSos provocados despu_s de la entrega.

Fallas del producto si se utiliza para un

objetivo diferente del previsto o se usa deforma comercial.

Instalaci6ninadecuados.

Sitieneun problema con lainstalaci6n,

comuniquese con su vendedor o instalador.

Usted es responsablede suministrar

adecuadas instalacionesel_ctricas,de gas,

de salidag otrasconexiones como se

describeen lasInstruccionesde Instalaci6n

incluidascon elproducto.

Producto no accesiblepara prestarel

serviciot_cnicosolicitado.

EXCLUSI()N DE GARANT[AS IMPL[CITAS--Su 6nico _1exclusivo recurso es lareparaciGn del product:o como se est:ablece en la present:e Garant:ia Limit:ada.Las garant:ias implicit:as, inclugendo garant:ias de comerciabilidad g apt:it:udpara un objet:ivo particular, se encuent:ran limit:adas a un afio o el periodo mGscort:o permit:ido por la leg.

GE Consumer & Industrial

AppliancesGeneral Electric CompanyLouisville, K¥ 40225monogram.com

Algunos estados/provincias no permiten la exclusi6n o limitaci6n de da_os incidentales oresultantes, por Io tanto esta exclusi6n o limitaci6n puede no aplicarse en su caso. Estegarantia leotorga derechos legales especificos U usted puede contar con otros derechos, que pueden variar deestado a estado/provincia a provincia.

Para conocer sus derechos legales en su estado/provincia, consulte a su oficinadel consumidor local o estatal/provincial o al FiscalGeneral de su estado.

Garante en los EE.UU.:General Electric Company, Louisville, KY40225

Garante en CanadG:Mabe Canada Inc.

4%80565

10-08JR

Printed in Ital 9

]2