CUSTOM GENERAL ORDER NO. 12 OF 2002 · 2018-06-25 · 2 GOVERNMENT OF PAKISTAN REVENUE DIVISION CENTRAL BOARD OF REVENUE *** C.No.1(1)CC/CGO/2002 Dated: 15th June, 2002 CUSTOM GENERAL

2

GOVERNMENT OF PAKISTAN REVENUE DIVISION

CENTRAL BOARD OF REVENUE ***

C.No.1(1)CC/CGO/2002 Dated: 15th June, 2002

CUSTOM GENERAL ORDER NO. 12 OF 2002 Considering the need to simplify and streamline the customs procedures and having regard to changes in trade patterns and technology, the Central Board of Revenue scrutinized the existing Customs General Orders issued over the last three decades. As a result of this exercise about 500 CGO’s were found to be redundant and the remaining nearly 200 have been recast into an easily assimilable single document for compliance by all concerned:-

CHAPTER - I DEFINITIONS

1. DEFINITIONS:- The following definitions shall be applicable wherever relevant.

(i) Raw materials:--means goods which are not machined or made to size and some process has to be carried out to make components, therefrom. These goods are used by weight or volume for the manufacture of components i.e. tubes, rods, sheets, ingots, billets etc. in length but not cut to size.

(ii) Sub-components:--means casting and forgings (not necessarily with

runners and risers), with no other processes carried out on them e.g. engine blocks, forged gear blanks etc. Items like tubes, rods, and sheets etc. cut to size or shape but not further processed will also be treated as sub-components.

(iii) Component:-- means a complete machined part of a system, not normally

useful by itself and not amenable to further dis-assembly.

(iv) Sub-assembly:--means a set of components assembled together designed for incorporation with other components or sub-assemblies in the final assembly of a finished product. Several sub-assemblies have to be assembled together to form a final product.

(v) Job-lot:--Job-lot is a collection of odds and ends for sale as one lot.

Normally these are goods of inferior quality. To cater to the needs of different customers a supplier varies specifications, colour schemes etc. It is a normal practice to produce slightly more than the order placed so that

3

after rejection, damage etc. there is still enough quantity left to meet the demand of the customer. After selling the goods to a few buyers, the supplier has an assortment of goods with slight modification or differences. These when put into a lot are called "Job-lot" and are generally sold at low prices.

(vi) Stock-lot:-- The goods of this description are different from goods of job-

lot in the sense that these are not different in sizes, specifications or colour etc. These are the goods which are kept in stock unsold because of change in tastes, market conditions or slight depreciation in quality because of age etc."

NOTE: (a) It is evident from the above that goods imported in job-lot should be the

collection of odds and ends with slight modifications or differences in sizes, specifications or colour etc. while the pre-condition for stock-lot goods is that these should be slightly depreciated in quality because of age and change of tastes etc.

(b) In order to curb malpractices, the following parameters for determination of normal value of goods imported as job-lot/stock-lot are laid down :--

(i) The value of job-lot goods shall be assessed after allowing a

maximum of 30% depreciation in prices of prime quality comparable standard goods;

(ii) The normal value of stock-lot goods be taken after allowing a maximum of 20% depreciation in prices of comparable prime quality goods;

(iii) In such consignments some importers get goods damaged, which have manufacturing defects or are rejected and claim these to be either job-lot or stock-lot, whatever suits the situations. Such goods are factory rejects and should not be treated as job-lot/stock-lot. These are clearly banned;

(iv) Where the importer claims the imported goods as mixture of the two, job-lot and stock-lots, the import value be appraised; as per sub-para (ii) above; and

(v) Normal value of goods cut to specific size for direct use but imported to create an impression of job-lot/stock-lot consignments shall be appraised at par with the value of comparable prime quality goods.

(vii) Shredded, waste and scrap:-- Iron or steel waste and scrap prepared by means of fragmentation (shredding) of various iron and steel scrap material including motor vehicles followed by separation (which may be magnetic) with a view to obtaining a high density product that is fairly clean and includes turnings, shavings, chips, milling waste, saw dust, fillings, trimmings and stampings etc.

(viii) Bundled scrap: --Waste and scrap generally of motor vehicles compressed into bales, blocks or briquettes used for the recovery of metal by re-melting.

4

NOTE:-- It is clarified that if the goods imported conform to either of the above definitions, the same may be treated as shredded or bundled waste/scrap, irrespective of the fact whether these fall under PCT heading 7204.4100 or 7204.4900.

(ix) Rubber scrap falling under heading 40.04 P.C.T Comprises of :--

(a) Old and used tyres without ring or bead. (b) Old and used tyres without tread. (c) Old and used tyres with threads/fabric visible at least 8

across the width (Mexico tariff classifies it under 40.04). (d) Tyre parings. (e) Totally dried tyres. (f) Old and used pneumatic tyre without the layer of tread

rubber and having a burst.

(x) Iron and Steel Scrap :- In determining whether a certain consignment is classifiable under item 73.03 or under respective headings, the following broad principles should be kept in view:--

(i) Articles which are not useable for industrial, construction or other

purposes, without recovery of metal in the first instance by the processes of either "remelting" or "forging" as defined in the Explanatory Notes shall be treated as scrap classifiable under 73.03.

(ii) Articles which with repair or renovation, without first being

recovered as metal, can be re-used for their original purposes or can be adapted for other uses, would not be classified as "scrap". Such goods shall be classified under their respective headings.

(iii) The real test for classification under 73.03 or other heads is

whether the article can be adapted to the original or other uses without recovery of metal. For this purpose, the original shape of article is not of material consideration unless the article is in a useable shape. For example, if a pipe with a number of holes cannot be retrieved and re-used as pipe and has to be melted or forged for recovery of metal, it shall be classified as 'scrap' and not as 'pipe'. But another pipe with a few repairable holes can be classified as 'pipes'.

(iv) In case of mixed lots where ninety per cent or more of the

consignment is undisputedly classified as 'scrap' the whole consignment shall be assessed under item 73.03. Where the content of 'scrap' is less than ninety per cent, identifiable goods, other than scrap, shall be classified and assessed to duty under respective heads.

5

CHAPTER – II

CLASSIFICATION

2. METHODOLOGY FOR RULINGS:- In order to implement the recommendations of the World Customs Organization regarding the introduction of the programme for binding pre-entry classification information and improvement of Tariff Classification Work and related infrastructure. It has been decided to introduce the following procedure:

i) Routine classification issues will continue to be decided by the respective Collectorates at their own level. Complicated classification disputes will be referred to the Classification Centre established at the Collectorate of Customs (Appraisement), Karachi with effect from October 01,2001. In addition to deciding the classification disputes, the centre will also issue binding pre-entry classification rulings on the specific request of an importer.

ii) Classification Centre will perform the following function:

a) to determine pre-entry classification; b) to examine and settle classification disputes/references/queries

referred either by various Customs stations or by the traders; c) to compile and print classification rulings on yearly basis; d) to monitor and ensure that uniform and accurate classification

decisions are made at all customs stations; e) to devise appropriate software/programme to monitor the quality of

classification work through networked computer system; f) to create and preserve a database containing all classification

matters and the related documents/publications/information; g) to maintain contacts and exchange information regarding

classification matters with other customs administrations in the world;

h) to groom and train officers and staff, in the field on HS classifications and classification mis-declarations, in co-ordination with the Directorate General of Training and Research, (Customs, Sales Tax and Central Excise); and

i) to identify items/goods prone to misclassification.

iii. The classification Centre shall be run and managed by a classification committee to be constituted by the Collector of Customs, Appraisement. The said committee shall be headed by an Additional Collector and consist of as many members as may be nominated by the Collector appraisement. The said committee may co-opt representatives of other Collectorates and trade bodies as and when required on case to case basis. The committee may also call specialists and experts for expert opinion in determining classification of an item. The committee will meet at least once in a month but may hold as many meetings as required to dispose off the work.

6

iv. Regarding pre-entry classification, the importer, prior to making actual

import, may request in writing for a binding pre-entry classification ruling to the classification Centre. The said request shall be accompanied by the following;

a) full description of goods along with necessary details required for

determining classification, including trade name, generic name, etc;

b) technical literature/certificate showing structure composition, laboratory test reports etc;

c) trade sample, photograph, drawings, if any; d) correspondence or preliminary import documents, proforma

invoice etc. along with proposed HS classification; and e) any other relevant information.

v) On receipt of the above request, the Centre will seek opinion from the relevant group of Appraisement Collectorate, Custom House, Karachi as soon a possible but not later than fifteen (15) days of the receipt of the request. Thereafter , the case will be presented in the meeting of the classification committee where the importer or his representative shall also be invited for discussion. The committee may also direct the importer to supply any other information or document as it may deem necessary before making its decision.

vi) The classification determined by the committee shall be subject to

approval by Collector of Customs Appraisement. The Collector may agree with the findings of the committee, change the classification or refer back the case to the committee for denovo consideration. After approval by the collector, the ruling shall be communicated in writing to the importer and all Customs Collectorates as soon as possible but not later than ten days of the approval by the Collector.

vi) The classification thus communicated will be binding, in accordance with

the terms set out therein, on the Customs authorities in respect of the tariff classification of goods for a period of one year from the date of issue subject to paragraphs viii & ix hereinafter following.

vii) The classification ruling will be treated as annulled if it is found

subsequently that the same was obtained by providing incorrect, false, misleading or incomplete information by the applicant.

ix) The ruling shall cease to be valid where:

a) It becomes incompatible with new fiscal tariff measures or judicial

decisions; and b) where the holder of such information is notified in writing of its

withdrawal, revocation or amendment on account of further

7

details/information having surfaced casting doubts about the correctness of the ruling.

viii) In cases where the classification committee is unable to resolve the

dispute, the same will be referred to the Board through the Collector of Customs Appraisement for its decision or onward submission to the World customs Organization, Brussels for a ruling on the subject.

NOTE:-The Collectorate of Customs Appraisement, Karachi will provide computer,

internet, office equipment, furniture, space, personnel and other technical material, financial and human resources as may be required for the smooth running of the classification centre. The classification ruling so issued by the centre will be widely circulated in the form of a Public Notice amongst the trade, industry and customs organizations in the country.

3. CLASSIFICATIONS:- The items as described in column 2 below shall be classified as per the rulings appearing in column 3 of the following table:-

TABLE S # Item description Ruling 1. Electronic white boards with accessories. 90.10 2. Machinery of measuring hides and skins 90.31 3. Low sodium cooking and table salt under the hormonized system. 3824.9090 4. Cyanoacryiate Adhesive Elfy (20Kg. Packing) 3906.9 5. Roller Coating printing ink R-976ES 32.15 6. "Transparancies" imported with books for use in teaching and training. 49.01 7. Armoured security vehicle 87.02 to 87.05 8. Flavoured milk 2202.901 9. Polyurethane resins and products of headings 39.01 to 39.13 where the

solvent accounts for more than 50% by weight 3208.9000

10. Milk "morinaga" chill-mil follow up formula :- if put up for retail sale if not put up for retail sale

1901.1090 1901.1030

11. Lubricating oil with certain additives to improve the viscosity, inhibit rust etc. (Depending upon the mode of packing).

2710.0081 or

2710.0082 12. Poultry Vitamins (I) Rovimix A 500 type P (vitamin A), Rovimix E 50

Adsorbate (vitamin E), and (iii) Rovimix D 3 50 (vitamin D3) which in addition to vitamins also contain inorganic substances namely Silica and calcium carbonate in a matrix of gelatin , dextrin, carbohydrates, etc. for purposes of preservation or transport. Vitamin B 12 1% Feed grade and (ii) Rovimix H2 (vitamin H 2 ) i.e. D-Biotin the essential character of which has been altered by the addition of other substances.

29.36

2309.9000

8

13. Blank passport booklet (both ordinary and machine readable), being printed documents for identification intended for completion in manuscript or typescript.

4911.9990

14. Spilt type air conditioning machines, depending upon their characteristics. 8415.81, 8415.82 or

8415.83 15. Colour precipitant used as decolourizing agent in sugar industry, with the

brand name "Talofloc" (solution of cationic surfactant in isopropyl alcohol, containing properties of surface active agents)

3402.9091

16. Solvitose C5-HV and Empol-PS (Thickening agents for textile fabric printing)

3809.9100

17. (i) Meropan Dpe Konz, (ii) Heptol Keb Konz, (iii) Tubifix MF 100 Konz and (iv) Contavan Gal Konz (Preparations of a kind used in textile industry) Anti Foam B-100

3809.9091

3824.9099

18. Azodicarbonamide(Unicel DSP-4) blowing agent , composed of 99.9% Azzodicarbonamide with variation of + 0.5%)

3824.90

19. Ophthalmic product known as "Coatel" (viscoelastic solution for use in cataract surgery)

3824.9099

20. Offset printing blankets composed of laminated textile fabric bonded together by means of rubber adhesive covered on one side with vulcanized rubber sheets, in rolls.

40.08

21. Sizing agents viz. Sizetex SA & Sizetex ZA Composed of sodium alginate in association with Starch and organic inhibitors/additives.

3809.9100

22. Transport vehicles:- (a) Bus/Coach are synonymous. Vehicles designed for transport of 10 or more (including driver) having 10 or more seats (including drivers & jump seat). Alternatively with only drivers & front seat and empty rear portion/compartment but designed for 10 or more persons subject to certification by the Manufacturer/Recognized sole agent/ Sole distributor (on behalf of the principal i.e. manufacturer, that the vehicle was originally designed for transport of 10 or more persons.

87.02

(b) Four/Two wheel drive vehicles eg. Jeeps,station wagons and Surf etc. Luxury vehicles originally designed by the manufacturer for less than 10 seats (inclusive of the drivers seat).Indicative criteria of such vehicles are: (i)Presence of permanent seats with safety equipment for each person or presence of anchor points or and fittings for installing seats and safety equipment, in the rear area behind the driver and front passenger (whether fixed / fold away / collapsible / removable from anchor points). (ii) Presence of rear windows along the full length of the two side panels. (iii) Presence of sliding /swing -out doors with windows on the side panels.(iv) Presence of comfort features and interior finish/fittings in addition to seating in the rear area.(v) Absence of permanent panel / barrier between area designated for the driver and passengers and a rear area designed for transport.

87.03

9

(c) Panel glass vans having a capacity of upto 6 persons (including the driver) fitted with steel / glass panels on both sides, which are primarily designed for transport of goods e.g. 'V' type Hiace vans but subsequently fitted with 10 or more modified seats. Indicative criteria of such vehicles are :- (i) Presence of a seperate cabin for the driver and passengers and a separate open platform with side panels and a drop-down tailgate.(ii) Presence of permanent panel / barrier between area designated for the driver and passengers and a rear area designed for transport.(iii) Presence of rear seating that lacks safety restraints for passengers and is designed to collapse or fold to allow full use of the platform or floor for transport of goods. (iv) Absence of rear windows along the two side panels. (v) Absence of windows, comfort features, interior finish and fittings in the area behind the driver and front passenger (Van type)

87.04

10

CHAPTER - III

DOCUMENTS 4. COMPUTER COMPATIBLE DOCUMENTS:- The following computer compatible forms have been adopted since 01.07.1996 :--

(i) Bill of Entry for consumption (Annex-I) (ii) Bill of Entry for Bond (Annex-II) (iii) Bill of Entry from Bond (Annex-III) (iv) Bill of Export (Annex-IV)

(v) Transhipment Permit (Annex- V) (vi) Application for duty/tax drawback/rebate (Annex- VI) (vii) Test Memo (Annex- VII)

2. Colour scheme of the forms is as under:-- (a) Bill of Entry for consumption White (b) Bill of Entry for Bond Yellow (c) Bill of Entry from Bond Green

3. The respective Collectorate would mention the nomenclature/ station of the Collectorates in the column indicating the type of Bill of Entry.

11

ANNEX-I

Bill of Entry For Consumption (Appraisement Collectorate)

14. Bill of Entry No.

_______________________ Custom House Agent’s Name:

15. License No. _______________________ 16. Phone No. ________________________

1. Importer’s Name & Address: ___ _______________________________ _______________________________ 2. Consigner’s Name & Address: ___

____________________________ _______________________________

3. Import Registration No. ________ ___________________________ ____________________________

7. (a) L.C. No.

___________________________ (b) L.C. Date

__________________________ (c) L.C. Amendment Date

_______________ (d) Total L/C Value

Rs.__________________ (e) Bal.

Rs.___________________________

17. Insurance Amount Rs.

___________________ 18. Landing Charges

Rs:____________________ 19. Assessable Value

Rs:____________________

12

4. N.T. No. ____________________ 5. Sales Tax Regn. No. __________ 6. (a) Annex-B/Import Auth. No.___

(b) Annex-B/Import Auth. Date__ (c) Total Value Rs. ___________

_ 8. Demand Draft No. &

Date:________________ 9. FOB Value in Foreign

Currency:___________ 10. Freight in Foreign

Currency:_______________ 11. C&F Value in Foreign

Currency:___________ 12. Value (Foreign

Currency)/AV:_________ 13. Rate of

Exchange:_______________________

20. Documents attached :-

□ Commercial invoice. □ Letter of credit

□ Indent/Proforma Invoice □ Valuation Form/Slip

□ Bill of Lading. □ Packing List

□ Certificate of Origin. □ Test Report

□ Ann. B/Imp. Auth. Letter □ Additional sheets

21 Vessel 22 IGM

No. & Date 23 Index No.

24. B/L No. with date

25. Port of Shipment of goods with Country

26.Gross Weight

27. Net Weight 28. No./Mode of Packages

29. S.No. 30. Marks &

Nos. 31. Description with specification of Goods (Each item to be detailed separately)

32. PCT Heading No.

33. Quantity with Unit

34. Origin Code

13

Value 35.V.A. No.(if applicable)

36. Declared Unit Value

37. F. Currency C&F

38. Pak. Rs. (assessable value)

39. Rate of Customs Duty

40. Amount of Duty Rs.

41. Value for Sales Tax Rs.

42. Amount o Sales Tax

43. Details of Exemption Claim

44. No. of Containers _________________________ of following Numbers: 45. I/We declare the details given above to be true and

complete. Importers/Clearing Agent Signature with Stamp.

46. A.O’s Signature with Stamp

47. P.A’s Signature with Stamp

14

Details of Revenue Recovered: Import Duty Rs.__________ R.D. Rs.__________ Sales Tax Rs,___________ Sales Tax ( at source) Rs.__________ Income Tax Rs.___________ C.E. Duty Rs.___________ Fine Rs.___________ Penalty Rs.___________ Misc. Rs,.___________ Other (Specify Rs.___________ Grand Total Rs.___________ (In Words Rs)____________________

50. C/D/F/.No.With Date

51. Bank’s Officer (Signature with Stamp)

52. Remnarks 54. Out of charged by Disignation: Signature: /stanoL

49 (a) (b) (c) (d) (e) (f) (g) (h) (i)

48 Machine No with Date

________________________________ 53. File No.

Noting/objections from Customs Staff & either replies from Importer/Clearing Registration by Custom’s Shed Staff

15

Agent. 1. Date of receipt ________________________ 2. Time of receipt ________________________ 3. Regn. No. ____________________________ 4. Signature _____________________________

Registration by KPT Staff

Book No. Page No. Date 1. Customs Appraisement Ticket. ________________________ _________________________ ___________________ 2. Wharfage Charges. ________________________ _________________________ ___________________ 3. Storage Charges. ________________________ _________________________ ___________________ 4. Gate Pass. ________________________ _________________________ ___________________

Misc. Official use.

Examination Order by Appraising Group

Examination Report by the Custom’s Shed Staff 1. IGM No. & date _______ Index No. ____ CRF No._______ 2. Location: Shed No. ______________ Wharf______________ 3. Inspected the whole lot comprising _______________ cases. 4. Examined __________% selected cases bearing No.________ 5. Container Nos. __________________________________ 6. Marks & Numbers. ________________________________

7. Objective verifications (initial relevant box only) Yes No NA

(a) Is V.A. correctly applied ? □ □ □ (b) Is sample forwarded to group/Lab? □ □ □ (c) Has the value been appraised? □ □ □ (If yes, mention the A.V)

(d) Are all the declaration as per invoice □ □ □

16

packing list & B/E.

(e) Is any additional sheet of exam. report □ □ □ attached.

5. Physical Verification Declared (a) Description _____________________________________ (b) Specification _____________________________________ (c) Quantity ______________________________________ (d) Origin _____________________________________ (e) PCT Heading _____________________________________ (f) Weight (Gross/Net) _________________________________ (g) Mode of Packing _________________________________ (h) Manufacture/expiry date _____________________________ (i) Other _____________________________ 6. Special remarks (if any ___________________________

Ascertained

Difference

(Please attach additional sheet, if required) ACA (Shed)

E.O. A.O/M.S.A. PA(Shed) ANNEX- II ORIGINAL

Bill of Entry For Bond (Appraisement Collectorate)

1. Importer’s Name & Address: ____ _______________________________ ______________________________ 2. Consigner’s Name & Address: __

7. (a) L.C. No.

___________________________



15. Licence No. _______________________ 16. Phone No. ________________________

17

17. Landing Charges


Rs:____________________

____________________________ ____________________________

3. Import Registration No. ________ ___________________________ ____________________________

4. N.T. No. ___________________ 5. Sales Tax Regn. No. _________ 6. (a) Annex-B/Import Auth. No.___

(d) Annex-B/Import Auth. Date__ (e) Total Value Rs. ___________

(b) L.C. Date __________________________

(c) L.C. Amendment Date _______________

(d) Total L/C Value Rs.__________________

(e) Bal. Rs._________________________

8. FOB Value in Foreign Currency:___________

9. Freight in Foreign Currency:_______________

10. C&F Value in Foreign Currency:___________

11. Value (Foreign Currency)/AV:_________

12. Rate of Exchange:_______________________

13. Insurance Amount Rs. ____________







□ Delivery Order : □ 20 Vessel 21 IGM




25.Gross Weight


28. S.No. 29. Marks &

Nos. 30. Description with specification of Goods (Each item to be detailed

31. PCT Heading No.


33. Origin Code

18

separately)

Value 34. No. (if applicable)


36. F. Currency C&F


38. Rate of Customs Duty

39. Amount of Duty Rs.

40. Value for Sales Tax Rs.

41. Amount of Sales Tax Claimed

42. Details of Exemption

43. No. of Containers _________________________ of following Numbers: 44. I/We declare the

details given above to be true and complete.

Importers/Clearing Agents Signature with Stamp.

45. A.O’s Signature 46. P.A’s Signature with stamp with stamp

Name of Warehouse :__________________ (a) Warehouse No.:PU/PR:__________________ (b) N.O.C. No: ___________________________ (c) Bond Execution No. ____________________ (d) Bond Execution Date:___________________

19

49. C/D/F. No. with Date

________________ Bank’s Officer (Signature with Stamp)

51. Remarks 53. Out of charged by:

Designation:

Signature:

Stamp:

47. Machine No. with Date

48. Details of Revenue Recovered : (a) Import Duty Rs. _________ (b) R.D. Rs. _____________ © Sales Tax. Rs. _____________ (d) Sales Tax (at source) Rs.______ (e) Iqra Surcharge Rs. _______ (f) Income Tax Rs. _____________ (g) C.E. Duty Rs. _____________ (h) Fine Rs. _____________ (i) Penalty Rs. _____________ (j) W.H. Surcharge Rs. _____________ (j) Misc. Rs. _____________ (k) Other (Specify) Rs. _____________

Grand Total Rs. _____________ (in words Rs.)

52. File No. __________________________

Noting/objections from Customs Staff & their replies from Importer/Clearing Agent.

For use by Customs Bonds Section & E.O. (Bond)

For use by Bonder

Misc. Official use

20

ANNEX-III ORIGINAL

Bill of Entry From Bond (Appraisement Collectorate)



15. Licence No. _______________________ 16. Phone No. ________________________

1. Importer’s Name & Address: ____ ______________________________ ______________________________ 2. Consigner’s Name & Address: ___

____________________________ ____________________________

3. Import Registration No. ________ ____________________________

17. (a) L.C. No.

___________________________ (f) L.C. Date

__________________________ (g) L.C. Amendment Date

_______________ (h) Total L/C Value

Rs.__________________

17. Landing Charges


Rs:____________________

21

____________________________ 4. N.T. No. ____________________ 5. Sales Tax Regn. No. __________ 6. (a) Annex-B/Import Auth. No.__

(b) Annex-B/Import Auth. Date_ (c) Total Value Rs. __________

(i) Bal. Rs._________________________

18. FOB Value in Foreign Currency:___________

19. Freight in Foreign Currency:_______________

20. C&F Value in Foreign Currency:___________

21. Value (Foreign Currency)/AV:_________

22. Rate of Exchange:_______________________

13. Insurance Amount Rs. ___________________







□ Delivery Order : □ 20 Vessel 21 IGM




25.Gross Weight


28. S.No. 29. Marks &

Nos. 30. Description with specification of Goods (Each item to be detailed separately)

31. PCT Heading No.


33. Origin Code

34. No. (if Value 38. Rate of 39. 40. Value for 41. 42. Details

22

applicable)


36. F. Currency C&F


Customs Duty Amount of Duty Rs.

Sales Tax Rs. Amount of Sales Tax Claimed

of Exemption Claimed



No: ___________________ No: ___________________ Importers/Clearing Agents Signature with Stamp.

45. A.O’s Signature 46. P.A’s Signature with stamp with stamp

54. Name of Warehouse :__________________ (e) Warehouse No.PU/PR:__________________ (b) N.O.C. No: ___________________________ (c) Bond Execution (d) Bond Execution Date:___________________

23

49. C/D/F. No. with Date

_____________________ 50. Bank’s Officer

(Signature with Stamp)

51. Remarks 53. Out of charged by:

Designation:

Signature:

Stamp:


48. Details of Revenue Recovered : (a) Import Duty Rs. ______ (b) R.D. Rs. _____ © Sales Tax. Rs. _____ (d) Sales Tax (at source) Rs._______ (e) Iqra Surcharge Rs. ______ (f) Income Tax Rs. _______ (g) C.E. Duty Rs. _______ (h) Fine Rs. _______ (i) Penalty Rs. ________ (j) Penal Surcharge Rs. ________ (i) Misc. Rs. _______ (k) Other (Specify) Rs. _______

Grand Total Rs. ________ (in words Rs.) ______________________________________________________

52. File No.

__________________________ Noting/objections from Customs Staff & their replies from Importer/Clearing Agent.

For use by Customs Bonds Section & E.O. (Bond)

For use by Bonder

Misc. Official use

24

ANNEX-IV

1. Exporter’s Name & Address:

Bill of Export (Appraisement Collectorate)

18. Custom House Agent’s Name: _________________ _____________________________________

25

________ ________________________________ ________________________________ 2. Exporter’s Registration No.

___________ 3. N.T. No.

________________________ 4. Sales Tax Regn. No.

______________ 5. Sales Tax Invoice No. & Date:

________ 6. (a) Form ‘E’ No.____________

____ (d) Form ‘E’ Date:

_______________ (e) Form ‘E’ Value Rs.

___________ 7. Consignee’s Name & Address :

_____ _______________________________ _______________________________

8. Country of final destination : ________

9. (a) L.C. No. ___________________________

(b) L.C. Date __________________________

10. A.R.3 No. & Date _______________________ 11. FOB Value in Foreign

Currency:___________ 12. Freight in Foreign

Currency:_______________ 13. C&F Value in Foreign

Currency:___________ 14. Rate of

Exchange:_______________________ 15. Insurance Amount Rs.

___________________ 16. Other Charges Rs.

______________________ 17. Assessable Value Rs.

____________________

_____ 19. Licence No. _______________________ 20. Phone No. ________________________ 21. C/A’s S.No. of B/Export:

____________________ 22. Documents attached :-


□ A.R. 3/Sales Tax Invoice □ Export Authorization



□ Form ‘E’ □ Additional sheets

□ Export Price Certificate □

23. Vessel 24 IGM

No. & Date 25. Colours & Flag

26. Shipping Agent’s No.

27. Port of Destination of goods & Country

28. Gross Weight


26

31. S.No. 32. Marks & Nos. 33. Description with specification of Goods (Each

item to be detailed separately)

34. PCT Heading No.


Value 34. No. (if applicable)


38. F. Currency (assess. Value)

39. Pak. Rs. 40. Amount of E.D.S Duty

41. Rate of Customs Duty (Rs)

42. Amount of Customs (Rs)

43. Amount of Agri-Cess Claimed

44. Rebate Notification



Exporter’s/Clearing Agents Signature with Stamp.

47. Examination Order :

27

50.Cash No. with Date _____________________ 51. Bank’s Officer

(Signature with Stamp)

52. .O’s

Signature with Stamp

53. P.A.’s

Signature with Stamp

55. Remarks

56. Let Examine


49.Details of Revenue Recovered: (a) E.D.S. Rs. _____________ (b) Export Duty Rs. _____________ © R.D. Rs. _____________ (d) Agri-Cess Rs._____________ (e) C.E. Duty Rs. _____________ (f) Fine Rs. _____________ (g) Penalty Rs. _____________ (h) Misc. Rs. _____________ (i) Other (Specify) Rs. _____________

Grand Total Rs. _____________ (in words Rs.) ______________________ _

54. File No.

__________________________

Noting/objections from Customs Staff & their replies from Importer/Clearing Agent.

‘’Passed in ’’ by Preventive Staff

1. Container(s) No. ____________________________ 2. No. of Packages: ____________________________ 3. Reg. No. ___________________________________ 4. Truck No. __________________________________ 5. Date: ______________________________________ 6. Time :______________________________________ 7. Signature: ___________________________________

28

Registration by Custom’s Shed Staff

1. Reg. No. _________________________________ 2. Date: ____________________________________ 3. Time: ____________________________________ 4. A.O/E.O. Marked: __________________________ 5. Signature :_________________________________

Examination Report by the Custom’s Shed Staff 1. Location :__________________________Wharf

___________________. 2. Inspected the whole lot comprising _____________________

cases. 3. Examined _________________% Selected cases bearing No.

_________. ___________________________________________________________

4. Container Nos._______________________________________________ ___________________________________________________________

7. Objective verifications (initial relevant box only) Yes No (a) Are all the declarations as per invoice

Packing list & Bill of Export ? □ □

(b) Is value correctly declared ? □ □

(c) Has the value been appraised ? □ □ (if yes, mention the A.V.) Rs.

(d) Is sample forwarded to group/Lab? □

29

□

(e) Is any additional sheet of exam. □ □ report attached ?

5. Physical Verifications Declared Ascertained (a) Descriptions : ________________________________________ ________________________________________ ________________________________________ ________________________________________ (b) Quantity : ________________________________________ ________________________________________ (c) Weight : ________________________________________ ________________________________________ (d) Others : ________________________________________ ________________________________________ 6. Special remarks (if any) : ________________________________________ ________________________________________ _______________________________________________________________________________________________________________________________

(Please attach additional sheet, if required)

30

E.O. A.O./M.S.A.. PA (Shed) ACA (Shed) ALLOW LOADING BY PREVENTIVE STAFF (a) Container(s) No.

______________________________________ (b) No. of Packages :

________________________________________ (c) Time : ______________________________________ (d) Date : ______________________________________ Signature with Seal : ______________________________________

MASTER/SHIPPING AGENT (a) Container(s) No.

______________________________________ (b) No. of Packages:

______________________________________ (c) M.R. No. ______________________________________ (d) Date: ______________________________________ (e) Short Shipment :

______________________________________ (f) Signature with Seal:

______________________________________

ANNEX-V

1. Name of Carrier :

______________________ - TRANSHIPMENT PERMIT

11. Machine No. with date: _________________

__________________________________

31

______________________________________ _____________________________________ 1. T.P. application No.

_____________________ ______________________________________ 2. Delivery Order No.

_____________________ _____________________________________

4. Name of Dry Port : _____________________ ______________________________________

2. Importer’s name and address: _____________

______________________________________ 3. N.T. No.

______________________________ 4. Import Registration No.

__________________ 5. Consigners name and address:

_____________

______________________________________

9. C & F Value : __________________________ 10. L.C. No. with date :

_____________________

____ 12. T.P. No. with date :

_____________________ (allotted by Customs House)

____________________________________ 13. Signatures and Seal of the authorized

officer of Custom House.

14. Vessel 15. IGM No. &Date

16. Index No. 17. B/L No. with Date

18. Port of Shipment of Goods with Country

19. Gross Weight

20. Net Weight

21. S.No. 22. Mark & Nos. 23. PCT Heading 24. Description with specification of goods (each item

to be detailed separately)

32

25. Quantity with unit 26. Origin Code Country

of Origin 27. Total No. of Containers

28. S. No. of containers 29. Seal No. affixed by Customs/Contractor

30. It is requested that the transhipment may be allowed. We

declare that the details given above are true and complete. In case of any incorrect declaration in invoice/other documents regarding value, weight, quantity, quality and description unearthed at any stage before landing of goods at destination, we undertake to inform the Customs House on priority. In case of damage/pilferage/accident/breakage of seals etc. , we undertake to inform the Custom House, Karachi, and Customs authorities at Customs stations of destinations and area of occurrence and to get the goods examined and containers etc., re-sealed by the customs authorities.

Signature of authorized officer/nominee of carrier

31. Documents to be attached : □ Undertaking of the importer □ Indent/Proforma invoice □ Commercial invoice □ Packing List. □ Bill of lading. □ Letter of credit □ □

32. Remarks 33. Goods/container received intact. 34. Signature and seal of Customs Officer of relevant Dry Port.

Objection/Observations by Customs

Replies by the carriers

Examination report of Customs, if conducted

33

For KPT use only

For KMC use only

ANNEX-VI SR-2 No.__________ Date: ____________

APPLICATION FOR DUTY/TAX DRAWBACK/REBATE PART-I (To be filled in by the Exporter/Authorised Clearing Agent)

1. Name of the Exporter : ______________________________________________________________________________ 2. Name of the Consignee : ______________________________________________________________________________ 3. Bill of Export No. and Date : ___________________________________________ 4. ‘‘E’’ Form No. and Date : ___________________________________________ 5. M.R. No. and Date : ___________________________________________

DOCUMENTS ATTACHED 1. Quadruplicate copy of Bill of Export. 2. Bill of Lading. 3. Short-Shipment Notice. 4. B.C.A/B.G./Annex-A/F.E.76. 5. Import Documents. Others

AMOUNT OF DUTY DRAWBACK/REBATE CLAIMED

S. No. SRO No. & Date

Quantity/ Net Weight

FOB Value Rebate Amount (i) Customs Duty (ii) Sales Tax (iii) Central Excise Duty

Total

34

TOTAL1 Declaration : I/We declare the details given above to be true and complete.

Signature of the Exporter/ Authorized Agent.

=====================================================================================================

PART-II (TO BE FILLED IN BY CUSTOMS STAFF) 1. Name of the Exporter :

_____________________________________________________________________________ 2. SROs claimed. _____________________________________________________________________________ 3. Total Amount claimed:

_____________________________________________________________________________ 4. S.R. 2 No. _____________________________________________________________________________

Signature of Receipt Clerk

SR-2 No. _________ Date: ____________

PART-III (TO BE FILLED IN BY PROCESSING SECTION) 1. Name of the Exporter : ________________________________________________________________________________ 2. Description of Items. ________________________________________________________________________________ 3. Declared F.O.B. Value________________________________________________________________________________ 4. Ascertained F.O.B. Value_________________________________________________________________ 5. Admissible S.R.O’s ________________________________________________________________________________ 6. Rebate amount admissible: S.No. Item SRO No. & Date Quantity/Net

Weight FOB Value Rebate Amount Total

35

(i) Customs Duty (ii) Sales Tax (iii) Central Excise Duty

TOTAL 7. Amount in Words : ______________________________________________________ _______________________________________________________________ 8. Following documents have been checked and found in order :-

Yes No Yes No

(a) Quadruplicate copy of bill of Export □ □ (b) M.R. No. & Date. □ □

(c) B.C.A. □ □ (d) Bill of Lading. □ □

(e) L.C. □ □ (f) ‘’E’’ Form. □ □ (g) □ □ (h) □ □ 9. It is proposed that an amount of Rs. __________ may be sanctioned against B.C.A. No. ___________ dated ____________. Issued

by M/s ___________________________________. 10. SANCTION ORDER: An amount of Rs. ______________ as repayment of Customs duty, Rs. ________________ as refund of

Sales Tax and Rs. ________________ as rebate of Central Excise duty i.e. a Total of Rs. ______________ is sanctioned after scrutiny of the claim and supporting documents.

11. An amount of Rs. _____________ has been paid vide Cheque No. ____________ dated ___________________

Treasury Officer

ANNEX-VII. TEST MEMO

36

PART-I (TO BE FILLED IN BY IMPORTER/EXPORTER/CLEARING AGENT) 1. Name & Address of Importer/Exporter ____________________________________________________________ I.G.M. No.___________________________ Date: ___________________________ 3. Index No. _________________ 2. Vessels Name : _______________________________________________________________________________ 5. B/E Machine No. _____________________ Date: ___________________________ 6. C.H.A. L. No. ______________ 7. Description : _______________________________________________________________________________ 8. Generic Name ______________________________________ 9. Code No. ___________________________________ 10. H.S. No. __________________________________________ 11. Code of Origin. ______________________________ 12. Name of Manufacturer(with complete address: ___________________________________________________________ 13. Previous T.R. No. _________________________Date:_________________ 14. Literature attached :____________ (duly attested)

Signature with Seal of Importer/Clearing Agent

PART-II (TO BE FILLED IN BY THE APPRAISING GROUP)

1. Test Report No. __________________ Date: ____________________ 2. Alternative H.S. No. _________________ 3. Previous T.R. ____________________ Date:____________________ 4. Literature attached: __________________

Tests Required: (i) Composition ______________(ii) _____________ (iii) _________________ (iv) ______________

Signature and Seal of Principal Appraiser

PART-III (TO BE FILLED IN BY SHED STAFF)

1. Seal No. ________________________ Dispatch No. ___________________ Date: ________________________________ 2. Description on Packages: ____________________________ 3. Package/Container No. _____________________ (from which sample drawn) Signature and Seal of Signature and Seal of Signature and Seal of Importer/Exporter/Clearing Agent Drawing Officer Dispatcher

D PART-IV (TO BE FILLED IN BY LABORATORY STAFF) 1. Receipt No. __________________________________ Date: __________________________________________

37

PART-V (TO BE FILLED IN BY CHEMIST) 1. Name of Chemist: ___________________________________________ 2. Sequence No. _____________________ 3. Literature provided consulted/not consulted: 4. Test Method/Reference Book : ___________________________________________________________________________ 5. Composition : ___________________________________________________________________________ 6. Report : 7. Description Found : ___________________________________________________________________________________ 8. Suggest H.S. No. ___________________________________________________________________________________ Signature and Seal of the Testing Officer Signature and Seal of Countersigning Officer ___________________________________________________________________________________________________________

PART-VI (DESPATCHED PARTICULARS)

1. Dispatch No. _________________________________________ 1. Receipt No. ______________________________ 2. Date: _______________________________________________ 2. Date: ___________________________________ Signature and Seal of Dispatcher Signature and Seal of Group Clerk

38

3. IMPORT EXAMINATION MANUAL :-

In order to acquaint the Customs Staff with the requirments and techniques for examination of various import items and also to prescribe job description of each category of officers and staff posted at different locations of the wharves/examination places, an Examination Manual for import goods prepared by the Appraisement Collectorates may be treated as a guide for official use by all Customs Collectorates with appropriate modifications, if need be, for correct examination and assessment of the impor;t of goods.

39

CHAPTER - IV

ASSESSMENT OF VEHICLES

6. ASSESSMENT OF VEHICLES IMPORTED :--THE FOLLOWING PROCEDURE SHALL BE ADOPTED:- (i) Definitions:

(a) "Vehicles" for the purposes of these orders shall mean all vehicles falling in Chapter 87 of the First Schedule to the Customs Act, 1969.

(b) "F.O.B. Value" means the value certified by the manufacturer to be the

price applicable to a particular vehicle at the time of its manufacture and shall include the agent's commission.

(ii) Depreciation on used vehicles:

(a) The F.O.B. value of second hand vehicles (except motor cars of engine

capacity upto 1800CC) shall be depreciated at the following rates, subject to a maximum of 50%:-- (i) 4% per month for the first 3 months.

(ii) 2% per month for the subsequent months.

(b) The motor cars of engine capacity upto 1800 CC imported by passengers

who are covered by Transfer of Residence Rules, 1983 shall also be entitled for the depreciation in F.O.B. value as is allowed under para (ii) (a) (i & ii) above.

(c) A fraction of a month shall count as one complete month if consisting of

15 or more days, and shall be ignored if consisting of less than 15 days.

(d) The above depreciation shall be allowed for the period between the first registration abroad and the date of shipment (in case of vehicles imported through a Customs port) or the date of entry into Pakistan (in case of vehicles imported through a land Customs station).

(e) The date of first registration abroad shall be determined from the

registration book or a certificate issued in lieu of the registration book. In case of loss of documents, the depreciation shall be calculated from the 1st day of January of the year subsequent to the manufacture of the vehicle.

(iii) Abatement on damaged vehicles:

40

(a) No depreciation shall be allowed in the case of vehicles in respect of which the owner's claim for diminution of value due to damage sustained before or the time of entry, is granted under section 27 of the Act.

(b) Diminution of the F.O.B. price (and consequential abatement of duty) may

be allowed on the basis of actual compensation paid by the insurance company or, if the vehicle was not insured, on the basis of a survey conducted by a surveyor approved by the Controller of Insurance under the orders of an officer not below the rank of Assistant Collector of Customs. This abatement will however be subject to a maximum of 50% of the F.O.B. value of the vehicle.

(iv) Insurance:

Actual charges shall be added to the F .O.B. value and if the actual charges are not ascertained, these will be computed @ 1% of the F.O.B. value.

(v) The following minimum freight rates shall be added in the value of the vehicles to arrive at

C&F value :-- (a) Motor cars the ,engine capacity of Rs. 7,000.00

which does not exceed 1000 cc. (b) Motor cars the engine capacity of Rs. 9,000.00

which exceeds 1000 cc but does not exceed 1300 cc. (c) Motor cars the engine capacity of Rs.10,000.00

which exceeds 1300 cc but does not exceed 1600 cc

(d) Motor cars the engine capacity of Rs.11,000.00 which exceeds 1600 cc but does not, exceed 2000 cc.

(e) Motor cars the engine capacity of Rs. 12,000.00

which exceeds 2000 cc. (f) Pick ups, Hiace Vans, Transit Vans Rs.13,000.00

and the likes.

(g) Jeeps. Rs.16,000.00 (h) Coasters. Rs.40,000.00 (i) Buses and Trucks Chassis. Rs.20,000.00

These rates are subject to revision periodically if need arises.

(vi) Landing charges :

41

Landing charges @ 1% of the sum total of CIF value shall be added to arrive at the assessable-value.

(vii) Accessories :

The value of accessories shall be included in the value of the vehicle and will be subject to the rate of duty applicable to the vehicle in which the accessories are fitted.

(viii) Provisional Assessment :

In case the F.O.B. value of a particular vehicle is not readily available, the vehicles may be assessed provisionally under section 81 of the Customs Act, 1969 by 5% loading of the F.O.B. value of a similar vehicle. The Controller of Customs Valuation will immediately be informed of this provisional assessment and the resulting provisional deposit shall be adjusted/refunded on receipt of final advice from the Controller of Valuation.

7. ASSESSMENT OF CONFISCATED VEHICLES:-- FOR DETERMINATION OF RESERVE PRICES OF MOTOR VEHICLES TO BE DISPOSED OF THROUGH SALE/AUCTION ETC., THE PROCEDURE IS AS FOLLOWS:--

(a) Depreciation in the FOB value in respect of the second hand confiscated cars shall be allowed at the following rates:-.

(i) 4% per month upto first 3 months. (ii) 2% per month for the next 19 months upto 3 years subject to a

maximum of 50%. (iii) 10% per year on written down value method, exceeding 3 years. (iii) In case of badly damaged or very old (more than 6 years old

model) cars the value should be appraised keeping in view their physical condition.

(iv) The period less than six months shall be ignored and over 6 months

shall be taken as one year for allowing 10% depreciation.

(vi) In case of badly damaged and very old (more than 6 years old model) cars the value should be appraised keeping in view their physical condition.

In order to introduce uniformity in the system, it has been decided that procedure prescribed above should be applicable to all vehicles put to auction or sale whether confiscated or not. It has also been decided that motor vehicles should be placed in public auction/sale etc. at least twice. In case the reserve price cannot be obtained in two

42

successive auctions/sales etc., then the Deputy Collector/ Assistant Collectors concerned may propose to the Collector for reduction in reserve price. The Collector, if he deems fit, may reduce the reserve price keeping in view the previous bids received and the condition of the vehicle.

8. FORMS FOR USE IN CONNECTION WITH THE IMPORT AND

EXPORT OF MOTOR VEHICLES. The forms mentioned below are for use in the Custom Houses and Customs Collectorate’s:- MV.l.

1. Register for keeping the particulars of cars imported and exported duty free through Customs stations.

MV.2. 2. Customs Examination report of the motor vehicles on arrival at the

Customs station etc. MV.3.

3. Undertaking for the temporary importation of motor vehicle by tourists. MV4.

4. Form for the assessment of new motor vehicles. MV.5.

5. Form for the assessment of new vehicles (older model) with basic changes compared to latest models of identical description.

MV-6. 6. Form for the assessment of used motor vehicles without basic changes.

MV.7.

7. Form for assessment of used motor vehicles with basic changes compared to subsequent models of identical description.

43

CHAPTER – V

TEMPORARY IMPORTS 9. EMPTY CONTAINERS :- The transit, by Railways of temporarily imported empty containers, from any Land Customs Station of entry to Karachi via Lahore Customs Port is allowed subject to the following conditions, namely:--

(1) The containers are constructed in accordance with the internationally accepted standardized dimensions.

(2) Each container has distinguishing marks and numbers and is empty at the

time of dispatch and is certified by the examining officer .

(3) At the time when the said containers are loaded on to the railway from any Land Customs Station of entry to Lahore Customs Port the handling agents shall make an application in the form annexed.

(4) One copy of the application shall be retained by the proper officer at the

Land Customs Station of entry and the second copy shall be endorsed to the Lahore Customs Port after recording the time and date of dispatch. The examining officer shall also certify that the containers have been examined and found to be empty.

(5) The second copy of the application shall be placed on record at the Lahore

Customs Port and a cross tally shall be made with the actual number of containers received at the Lahore Customs Port.

(6) After receipt of the empty containers has been so recorded, information

thereof shall be sent to the Land Customs Station of entry in acknowledgement of the fact that the containers have been duly received at the Lahore Customs Port.

(7) After the containers have been received within the bonded premises of the

Customs Port they shall not be taken out of the premises save for export through Karachi.

(8) Onward transit journey of the containers after they have been loaded with

goods meant for export, shall be regulated in accordance with the Lahore Customs Port procedure.

44

To The Assistant Collector of Customs, Chaman/Torkham /Nokhundi

Sir, We request permission for the transit of the following empty containers to Karachi via Lahore Dry Port bearing marks and number………………………… on Railway KVC Wagon No…………….. train No…………..Time ……………………….. Dated…………………………

Signature Carrier /Handling Agent

Certified that the aforementioned containers have been examined and found to be empty. Allowed……………. Time……………….. Date……………………

(Appropriate Officer of Customs) 10. TANKER MOUNTED TRUCKS:- In order to regulate the import of liquefied Petroleum Gas to Pakistan via land route, following is the procedure for the temporary importation of tankers filled with liquefied petroleum gas without payment of duty and taxes:--

(I) The Prime movers of Pakistan origin shall be used for transportation of the

Liquefied Petroleum Gas filled tankers to Pakistan.

(2) The importing agency shall have authorization from Ministry of Commerce for importing L.P .G. filled tankers.

(3) The authorized importer shall furnish an indemnity bond to the satisfaction

of Collector covering the duty and taxes involved on the tankers being imported temporarily only such tankers shall be allowed the facility of temporary importation which are identifiable by the following information duly marked in an appropriate and clearly visible place on containers:--

(a) The identification of the owner or principal operator . (b ) The identification marks and numbers of the containers given by

the owner or operator; and (c) The tare weight of the container, including all its permanently

fixed equipment.

(5) The tankers filled with L.P .G. shall be allowed to stay in Pakistan for a period of 15 days; after expiry of which the empty tankers shall be re-exported to the country of origin. The tankers shall not be used for the carriage of goods in internal traffic.

45

(6) Period of stay in para (5) above may be extended upto a further period of 15 days by the Collector of Customs upon receipt of a request from the importing agency stating the reasons for such extension.

(7) Collector of Customs may issue a Standing Order devising a suitable

system to keep a close watch over the movement of the temporarily imported tankers.

11. SHIP CONTAINERS:- Following is the procedure for the temporary importation of ship containers:--

(1) Ship containers may be temporarily imported without payment of customs

duties for a period of 6 months by any person on furnishing to the Collector of Customs a bank guarantee equal to the amount of duty and taxes leviable thereon, or by a customs-licensed shipping agent on furnishing an undertaking on a non-judicial stamp paper of Rs.30/-.

(2) The period of temporary importation mentioned in para (1) above may be

extended by the Collector in genuine cases for a further period of 6 months.

(3) If a person wishes to lease out a container to another person, both may

submit written applications to the Collector of Customs who may allow the ‘on-hiring’ party to retain the container for the remaining period on receipt of fresh security on the principle laid down in para (1) above and may discharge the security given by the party ‘off-hiring’ the container. In such cases the retention period of the container shall be computed from the date of its first import and shall be governed by the terms and conditions laid down in paras (1) & (2) above.

(4) The aforesaid facility of temporary importation shall not be available on

container handling equipment such as forklifts, cranes, tractors, tug masters, trawlers etc. and their accessories and components except container seals of specific shape and Serial No. Embossed thereon as identifiable at the time of re-export.

46

CHAPTER – VI

SAFE TRANSPORTATION 12 . PROCEDURE FOR THE SAFE TRANSPORTATION OF LIQUID BULK

CARGO FROM PRIVATE/PUBLIC BONDED WAREHOUSES TO INLAND CUSTOMS BONDED WAREHOUSES.

The following procedure for the movement of such liquid cargo from private/public bonded warehouses at Oil Section, Keamari, Karachi to inland customs private/public bonded warehouses is prescribed:--

(i) On importation, the edible oil and other liquid bulk cargo intended for re-warehousing in inland Customs bonded warehouses, will be landed and stored in the first instance in the Bonded Tank Terminals at Keamari, Karachi. For their clearance therefrom, the bonder will prepare "into-Bond" bill of entry according to prescribed procedure in terms of section 84 of the Customs Act, 1969. The into-bond bill of entry so prepared will be registered and noted in the Oil Section, Keamari, according to the procedure laid down in the Import and Export Manual. After completion of Customs Formalities, the bonder will execute a bond under the provisions of section 86 of the Customs Act, 1969 for each consignment or a general bond in such manner and subject to such conditions, limitations or restrictions as the Collector of Customs (Preventive) may prescribe.

(ii) The bonder will also submit an unstamped copy of "Bond" to Assistant

Collector of Customs, Oil Section, Keamari, Karachi who will attest it and forward to the Collector of Customs and Central Excise in whose jurisdiction the goods are to be warehoused. The Collector of Customs/Central Excise concerned will independently verify that the consignment has been received and re-warehoused and will send intimation to that effect to the Assistant Collector of Customs, Oil Section, Keamari, Karachi. In this manner the Collector of Customs/Central Excise shall monitor the particulars of consignments destined for warehousing in his jurisdiction and provide independent intimation to the Custom House, Karachi, to the effect that the consignments have been warehoused.

(iii) The goods will be examined in the usual manner by the Customs Staff

posted at the Oil Section, Kemari, and representative samples thereof be drawn for test in order to confirm whether the liquid goods are within the limits of required specification and fit for human consumption or otherwise. The goods will, however, be allowed to be transported to their intended destination, and will not be detained for want of the result of laboratory tests. The Custom House will intimate the concerned Collector of the findings/results of fitness test as soon as they are received. The goods will however be allowed to be ex-bonded by the receiving Collectorate only on the basis of fitness certificate received from the

47

Custom House or on the basis of a test carried out by the concerned Collectorate itself.

(iv) After examination of goods, the bonder will make an application to the

Assistant Collector of Customs, Oil Section, Kemari, to grant permission for their safe transportation by railway tankers/private tankers direct from the Customs Bonded Tank Terminals under the provisions of section 100 of the Customs Act, 1969. When the permission is granted by the Assistant Collector o Customs, Oil Section, Kemari, the bonder will submit I bond, with sufficient surety, in a sum equal to the duty and taxes involved as provided in section 101 of the Custom Act, 1969 or a general bond as provided under section 101 ibid to the effect that goods will be safely transported to their destination and receipt thereof produced to the Assistant Collector of Customs, Oil Section, Kemari, within 15 days of re-warehousing. In addition to the above requirements, the bonder will also furnish a bank guarantee covering the value, customs duties and other taxes for safe transportation from Karachi Port to the inland bonded warehouse. In such cases, no escort will be necessary and the bonder will solely be responsible for safe transportation of the goods to inland bonded warehouse.

(v) The goods will then be taken delivery of from the bonded tank terminals

into the railway tankers/private tankers by the bonder or his authorized agent, under Customs supervision. After completion of loading of goods into the tankers, the same will be sealed with customs seal and a receipt to that effect be furnished to Assistant Collector of Customs, Oil Section, Kemari by the carrier, for record. Duplicate copy of the Into Bill of Entry will accompany the goods as a pass and another attested copy will be directly sent to the Officer Incharge of inland warehouse, by the Assistant Collector of Customs, Oil Section, Kemari.

(vi) The Officer Incharge of Inland bonded warehouse will ensure that the

goods are directly landed into the warehouse from the railway tankers/private tankers. He will receive and compare the goods with the help of the duplicate copy of into bond bill of entry and after satisfying himself about the full receipt of goods he will enter the particulars in the Ledger for record. Any discrepancy found will be reported to the Assistant Collector of Customs, Oil Section, Kemari, Karachi for necessary action.

(vii) The Officer Incharge of inland warehouse will return the duplicate copy of

the "Into Bond" bill of entry alongwith a certificate of the receipt of cargo in full to the Assistant Controller of Customs, Oil Section, Kemari, Karachi who after satisfying himself of the receipt of the goods by the Officer Incharge of inland bonded warehouse, shall order for discharge of the bond. The bank guarantee will, however, be discharged only after duty is received and proof of this effects is intimated to the Assistant Controller of Customs, Oil Section, Kemari, Karachi, by the concerned Collectorate.

48

(viii) The findings of the test report shall be endorsed on the ex- bond bills of entry by the examining staff before release is allowed.

(ix) For the purpose of availing these facilities, the bonder will have to submit

to the Collector of Customs (Preventive ), Custom House, Karachi, a certified copy of the public/private bonded warehouse license issued by the concerned Collector of Customs/Central Excise along with a calibration chart showing number and capacity of the bonded storage tank.

13. REVIVAL OF SAFE TRANSPORTATION SCHEME FOR UP-COUNTRY

BONDED WAREHOUSES:-

(a) It has been decided to continue the Sate Transportation Scheme for the carriage of bonded goods (machinery and raw materials only) imported by the industrial units operating their own private bonded warehouses from Karachi Port.

(b) The up-country bonded warehouses will operate under the following zones which will be supervised by the respective Assistant Collector of Customs Incharge of the Bonds:--

(i) Peshawar Zone; (ii) Rawalpindi Zone; (iii) Sambrial Zone (iv) Lahore Zone (v) Faisalabad Zone,(vi ) Multan Zone (vii) Sukkur Zone (vii) Hyderabad Zone (ix) Quetta Zone (x) Gaddani Zone (xi) Karachi Export Collectorate Zone.

(c) The transportation of the goods from Karachi Port to the Bonded Warehouses will be allowed through private & public carriers, duly covered by bank guarantees equivalent to duty & taxes involved and bonds executed for sum equal to double the amount of duty and taxes involved etc. The Board may, however, restrict the carriage of the goods through such designated carriers as may be decided on the recommendations of the Collectors of Customs or the Chamber of Commerce & Industry and/ or the Federation of Chambers of Commerce & Industry.

(d) The into-bond bills of entry for the respective consignments will be filed in manifest section of the Appraisement Collectorate, Custom House, Karachi, where a separate machine number bearing prefix “S.T.” (abbreviation for safe transportation) shall be assigned which will be sent to group/shed as the case may be. In sheds examination report shall be written on reverse of original, duplicate and triplicate copies of the bill of entry. After completion of formalities from group and sheds the bill of entry shall be presented by the Clearing Agent in Cash Section for payment of warehousing surcharge and excise duty if any. The Cash Section shall detach original, quadruplicate and statistical copy for dispatch to their destination and shall hand over duplicate and triplicate copy to the Clearing Agent for getting bank guarantee and bond executed by the importer and submission to Principal Appraiser Safe Transportation Cell. The P A. (S. T .Cell) after satisfying himself and recording the

49

particulars thereof in the master register in the following format date-wise shall allow out of charge.

S.T. B/E No. Bond No. Description of goods. Quantity/No. of Pkgs. Value

1. 2. 3. 4. 5.

C.D Sur. Iqra. S.T. C/A No. Remarks Letter No./Sr. No. 6. 7. 8. 9. 10. 11.

(e) The into-bond bills of entry for the respective consignments will be filed by the importers/companies availing Express Lane Facility, in the manifest section of the Appraisement Collectorate, Custom House, Karachi. A machine number bearing prefix "S. T" (abbreviation for safe transportation) shall be assigned. The Bond Section shall allow the Safe Transportation as per declaration of the importers and send the bills of entry to the Groups for completion under the Second Appraisement System. After completion of the bill of entry the clearing agent shall pay the surcharge etc. in the Account Section. The duplicate & triplicate copy of the bill of entry shall be given to the clearing agent and the remaining copies of the bills of entry be detached by Account/Cash section. The shed staff will inspect the goods and sign out of charge as per instructions given in Public Notice No. 5(/89)Exam) dated 6- 7-1998, issued by the Appraisement Collectorate Karachi .

(f) Responsibility of the Principal Appraiser Safe Transportation Cell:

(i) He shall make the goods out of Customs charge and hand over duplicate copy of the bill of entry to accompany the goods upto the up-country warehouse.

(ii) He shall prepare a daily statement in the format given in Annex-A.

(iii) He shall send the statement at (ii) above daily by fax or telex to the Assistant Collector Incharge of the respective Zone.

(iv) He shall send a weekly statement on the same format as at (ii) above on each Thursday or the last working day of the week to the respective Assistant Collector of the Zone giving details of all the consignments dispatched in the preceding week. A nil report on the prescribed proforma shall be sent by him on the last working day of the week if no consignment has been sent to the relevant Zone during the preceding week.

(v) He shall return the bank guarantee and bond executed by the importer covering Safe Transportation on receipt of confirmation of receipt of the goods from the Assistant Collector of the concerned Zone as per Annex-B.

(vi) He shall ensure dispatch of the original bill of entry received in the Safe Transportation Cell in pursuance of para (j) of this General Order to the respective Collectorate/Zone for final check.

50

(g) Responsibility of Officer Incharge of warehouse where goods brought under Safe Transportation Scheme are stored:

(i) He shall allow goods brought under Safe Transportation Scheme to be warehoused on production of duplicate copy of the bill of entry.

(ii) He shall maintain a warehouse register in the format given in para (d) above and shall make entries of the particulars of goods received in the warehouse in this register.

(iii) After making entries in the register he shall pass on the bill of entry (duplicate copy) to the Assistant Collector Incharge of bonds on daily basis after retaining photo-copy of the bill of entry for his record.

(iv) He shall obtain acknowledgement from the office of the Assistant collector as a proof of delivering the duplicate copy of the bill of entry.

(h) Responsibility or the Warehouse Keeper:

(i) The warehouse keeper of the bonded warehouse in which any goods are received under the Safe Transportation' Scheme shall, on every Thursday or the last working day of every week, furnish a weekly statement as per Annex-B to the Assistant Collector Incharge of the Zone; and

(ii) The aforesaid statement shall be furnished after due verification by the officer of Customs Incharge of the warehouse.

(i) Responsibility or the Assistant Collector Incharge of the Zone/ Bond:

(i) On receipt of duplicate copy of the bill of entry from the officer incharge of the warehouse the Assistant Collector Incharge of the Bond shall receive the same against acknowledgement;

(ii) He shall enter the particulars of the bill of entry in a master file maintained by him on the format given in para (d) above. These entries shall be made on one page of the register while entries of the ex-bond bills of entry shall be made on the other page for due accountal of receipts and clearances;

(iii) He shall furnish a statement as per Annex-C to the Safe Transportation Cell, Custom House, Karachi;

(iv) This statement shall be sent on the first working day of every week;

(v) A nil report shall be sent by him in case no consignments are received in any of the warehouses under the Safe Transportation Scheme.

51

(j) Collector of Customs (Appraisement), Custom House, Karachi and the Collectors of Customs Incharge of the various Zones, will ensure that regular counter-checking of the prescribed statements is done in order to ensure that the consignments have been received in full, duly stored and fully accounted for in the Bonded Warehouses and are cleared according to the , prescribed procedures.

(k) The original copies of bills of entry retained by Custom House, Karachi,

after computerization and audit shall be sent to S.T. Cell, who on monthly basis shall send the same to respective Collectorate/Zone by post, for final check.. For any violation of this order, Collector of (Appraisement), Custom House, Karachi, may refuse removal under this system besides other action prescribed under the law.

ANNEX-A

DAILY/WEEKLY STATEMENT OF THE DESPATCH OF GOODS

UNDER SAFE TRANSPORTATION S. No. Date of out

of charge. B/E No. PWL No.4 Pkgs Description Value Remarks

1. 2. 3. 4. 5. 6. 7. 8.

Signed Principal Appraiser ST Cell

Date:------------------

ANNEX-B

WEEKLY STATEMENT OF THE RECEIPT OF GOODS UNDER SAFE TRANSPORTATION S.No.

Date of out of Charge

B/E No. PWL No.4 Date of Receipt

Description Value

1. 2. 3. 4. 5. 6. 7.

Verified by Officer Incharge Customs Signed

Warehouse Keeper Name :______________________ Signed:______________________ Date:_______________________

52

ANNEX-C WEEKLY STATEMENT OF THE RECEIPT OF GOODS UNDER SAFE

TRANSPORTATION

ZONE _______________

S.No Date of Out of

charge. B/E No. PWL No.4 Date of Receipt Description Value

1. 2. 3. 4. 5. 6. 7.

Assistant Collector of Customs Name :_________________ Signed:)________________ Date:__________________

53

CHAPTER – VII

INDUSTRIAL CONCESSIONS 14. ISSUANCE OF PROVISIONAL CERTIFICATES:- Chief, Survey, Central Board of Revenue, issues provisional certificates, allowing release of upto 25% of the installed capacity, raw materials/components wherever necessary. Following will be the procedure for allowing this concession:--

(i) All the conditions mentioned in the concessionary Notification for issuance of a final certificate will have to be complied with by the applicant except that of survey, which in case of provisional certificate will be conducted after its issuance.

(ii) The provisional certificate issued would be tentative and conditional and it

would not confer any recurring right to the manufacturer towards the issue of final facility under concessionary Notifications or repeated issuance of provisional certificates.

(iii) For the difference in the applicable concessionary and statutory rates of

duty and taxes, the release will be allowed against bank guarantees.

(iv) Chief, Survey may impose any additional conditions on the provisional certificate wherever required.

(v) If at a later stage it is revealed that any of the raw materials and

component is available locally. The provisional certificate would stand withdrawn in respect of such raw material and component and duty and taxes would be recoverable on all such components or raw materials previously imported.

(vi) Copies of provisional/final certificates will also be sent to Director-

General (Intelligence and Investigation), Customs and Excise. 15. CLEARANCE OF RAW MATERIALS, SUB-COMPONENTS AND

COMPONENTS UNDER CONCESSIONARY NOTIFICATIONS FROM TWO PORTS AT KARACHI:-

(i) Importers-cum-manufacturers availing concessions under different

concessionary notifications are allowed to clear their consignments from specified Port or Custom House.

(ii) The importers-cum-manufacturers of Karachi approached the Board that it

is beyond the control of the importers-cum-manufacturers to ensure berthing of ships at only one specified port. This causes difficulties in clearance as the provisional/final certificate specifies only one port. It has, therefore, been decided to allow clearance of goods from

54

both Karachi Port as well as from Port Qasim to the units located in Karachi only.

(iii) The certificates issued under concessionary notifications for clearance of

goods at Karachi Port shall be valid for clearance of goods at Port Qasim and vice versa. However, the record shall be monitored and maintained at the port the name of which appears first in the provisional/final certificate. Collector of Customs (Appraisement) and Collector of Customs (Port Qasim) may work out the procedure in mutual consultation which may be circulated for the convenience of beneficiaries of the concessionary notifications.

16. LOCAL FABRICATION OF CERTAIN PORTIONS OF PLANT AND

MACHINERY FOR INSTALLATION IN INDUSTRIAL PROJECTS:- In case any sponsors envisage carrying out local manufacture of some machinery, they should approach the Chief Survey, CBR, Islamabad, at least 3 months before the import of fabrication materials along with supporting evidence in terms of contracts, sanction letters, agreements, feasibility studies etc., indicating the exact quantities/ qualities/values of fabrications materials and the machinery which have to be fabricated out of these materials to enable the CBR to determine the input/output ratio etc., to certify the requirement of the raw materials etc., in accordance with the provisions of table-II of SRO434(1)/2001, dated the 8th June, 2001. 17. DELIVERY OF RAW MATERIALS BY PRINCIPAL

MANUFACTURERS TO VENDORS:-

A liberal interpretation of the condition in house manufacturing facilities has been adopted. It has been decided that the vendors having manufacturing facilities and possessing L-1 licenses under the Central Excise Rules shall be entitled to receive imported raw materials and components from their Principal Manufacturers for the manufacture and supply of sub contracted vendor parts. It will however be the responsibility of the Principal Manufacturers to ensure that the concession granted is not misused. Otherwise they will be held responsible for the loss of revenue and shall indemnify the Government as provided in the relevant SROs.

This facility will be extended to all the manufacturing units. The field formations may therefore ensure and issue L-1 licenses to vendor industries and get them surveyed while conducting survey of the main units if required.

18. DEFENCE EQUIPMENT: A procedure for import of raw material, sub-components and components under concessionary Notifications for manufacture of defence stores, machinery and equipment for use of defense force is as follows

(a) All the individual concerns working for the DaMP will furnish Form SI and send it through a covering letter of the DaMP covering the specified items being manufactured by the party for DaMP. The concern will make

55

individual requests through DaMP supported by a copy of contract in each case.

(b) Input/output ratio showing %age of wastage will be attested by the DaMP

(c) All the concerns will get their individual L-1 licences from .the Assistant

Collector, Central Excise having jurisdiction. (d) The firm will provide to the Chief (Survey) a copy of blue print/map of

their premises and a list of machinery available with them; On the basis of which a provisional certificate will be issued allowing import of 25%/100% of the raw materials and components. "

( e) Survey of units and their vendors will be conducted under the supervision

of a Deputy Director (S&R) who will work out the annual capacity of utilization of raw materials and components and total manufacturing of furnished goods per annum and also the input/output ratios for each component/machinery/equipment. Facilities available with vendors will also be considered in house facilities.

(f) CBR will issue a final certificate for each individual contract for the

quantities required under the contract on one time basis. However, for any further contract no survey will be required unless the input/output ratio changes or new goods are introduced or the concern exceeds its annual fixed capacity by more than 50%.

(g) Other usual conditions except for the condition of approval of deletion

programme which in this case will be done by CBR or DGMP instead of Ministry of Industries will be applicable to items manufactured.

19. MANUFACTURE OF ENGINEERING GOODS IN BOND. The Government has provided a number of incentives to boost local manufacturers of engineering goods in the country. Concession of Customs Duty and sales tax is one of the major incentives. Import of raw materials and components for the local manufacture of engineering goods and agricultural implements has been allowed at concessionary rates of Customs Duty and sales tax in accordance with the provisions of the SRO regulating these concessions. 2. In certain cases, the procedure governing these concessions results in blockade of funds of the beneficiary industries because the effective rate of duty is charged in cash, and the difference between the concessionary rate and the tariff rate is secured in terms of bank guarantee or insurance guarantee which is discharged on production of the proof of proper utilisation of the components and raw materials. 3. In order to provide relief from such a blockade of funds, it has been decided that the Engineering Units which are principal manufacturers of the machinery listed in the table to SRO 547(I)/79, dated 28th June 1979 will be eligible to the facility of manufacture-in-bond.

56

4. Under this system, these units will be eligible for the import of their raw materials and components as certified by the Chief Survey and Rebate, Central Board of Revenue or the Collectorates of Central Excise and Land Customs, as the case may be, free of duty and sales tax for manufacture of engineering goods in the manufacturing bonded warehouses duly approved/by the respective Collectors. After manufacture of the goods in bond the importer-cum-manufacturer will have to account for appropriate utilisation of materials and components in accordance with the conditions of the relevant SROs. 5. At the time of ex-bonding the manufacturer will file the Bill of Entry in accordance with the concession to be claimed i.e.

(i) in case of goods meant for export, an ex-bond Bill of Entry along with the prescribed application form would be filed for export claiming total exemption of duty and sales tax; in case of raw materials and components used in the manufacture of agricultural implements, the Bill of Entry would be filed claiming the benefit of total exemption of duty and sales tax;

(ii) in case of goods to be supplied to the fully exempted areas, sectors or units

within the country against confirmed orders, the ex-bond Bill of Entry will be filed claiming total exemption of duty on the materials used for the manufactured goods;

(iii) for supply to the units and areas eligible for 50% concession, the Bill of

Entry will be filed claiming the benefit of 50% of duty; and

(iv) in case of rest of the goods, ex-bond Bill of Entry will be filed for payment of duty on the value of raw materials and components used in the manufacture of these goods at the rate applicable under the relevant SROs.

6. The assessing officer posted in the manufacturing unit will allow release accordingly after ensuring that all the conditions laid down and the formalities required under the relevant SROs have been fulfilled, and after verifying the correctness of the claim of the manufacturers. 20. TIME LIMIT STIPULATED UNDER VARIOUS CONCESSIONARY

NOTIFICATIONS :- It has been observed that quite often due to unavoidable circumstance beyond the control of importers-cum-manufacturers, the consumption of raw materials takes time beyond the specified period, as provided under concessionary notifications, consequently, the time limit of one year creates hardship for them. Therefore, in order to relieve them of this hardship, the Central Board of Revenue has decided to extend the aforesaid time limit of one year to one and a half year. 2. It has also been decided that in cases where consumption certificates can not be produced within the period of one and a half year, the Collector may allow extension in time limit for another six months after having satisfied himself that the delay in consumption of raw materials or production of consumption certificate was beyond the control of the importer-cum- manufacturer under intimation to the Central Board of Revenue.

57

CHAPTER – VIII

SPECIAL EXEMPTION 21. DIPLOMATIC BONDED WAREHOUSES-SALES TO ENTITLED

PERSONS/ ORGANIZATIONS ETC.:- (i) Licensees of diplomatic bonded warehouses established under Section 13

of the Customs Act, 1969 shall open foreign currency accounts in their respective names; and

(ii) Entitled persons/ organizations etc., shall make payment for purchase from the warehouses through cross cheques, pay orders or drafts issued in favour of the licensees from their foreign currency accounts maintained in Pakistan.

This order shall is in force since 26th June, 1994. 22. IMPORT OF GOODS BY EXPATRIATE EMPLOYEES OF FOREIGN OR

LOCAL COMPANIES, LOAN FUNDED PROJECTS, OR MEDIA PERSONNEL. (a) Expatriate employees of foreign or local commercial ventures/companies

or foreign nationals employed in loan funded projects and duly accredited media personnel of foreign media establishments in Pakistan shall be allowed to import personnel effects and household goods in accordance with Transfer of Residence Rules, 2001, (SRO 450(1)/2001 dated 18.06.2001). This will be subject to the condition that their assignment/employment in Pakistan is for a minimum period of two years. While claiming TR concessions such persons will produce a certificate from their employers to this effect.

(b) In addition to the T.R. concessions they would also be allowed to import

directly or purchase from duty free shops/ diplomatic bonded warehouses their requirements of alcohol, cigarettes and food stuff on payment of normal customs duties, sales tax and other taxes, if any. The import/purchase of alcoholic beverages will, however, be restricted to US $ 200 per family per month.

(c) food stuff worth US$ 1000/- per annum per person would be allowed to be

imported/purchased from duty free shops and diplomatic bonded warehouses without payment of customs duty and taxes by the foreign investors, executives and expatriate employees working in Pakistan, However, this concession will not extend to any alcoholic beverages".

23. PERMISSION TO ALLOW TEMPORARY IMPORTATION OF AFGHANISATN REGISTERED VEHICLES OF NGO’s INTO PAKISTAN FOR USE IN THEIR HEADQUARTERS AT PESHAWAR OR ISLAMABAD:-

58

(i) Since the head offices of most of the NGOs are based at Peshawar and in order to alleviate the problems being faced by the NGOs, the Central Board of Revenue delegated the powers vested in it under Section 21 of the Customs Act, 1969 to the Collector of Customs and Central Excise, Peshawar to allow temporary importation of very limited number of Afghanistan registered vehicles for the bonafide use of the NGOs that are registered with SAFRON which are doing re-habilitation work inside Afghanistan for a period of three months only.

(ii) The Collector shall maintain a detailed information in a master register in the enclosed format (Annex" A ") and shall also submit a monthly statement to the Board by the 7th of the following month to which it relates regarding the total number of vehicles allowed till the end of the month.

(iii) Collector of Customs Peshawar shall ensure that the facility is not misused by the unscrupulous elements.

ANNEX-A

STATEMENT SHOWING AN UPDATED LIST OF THE PARTICULARS OF AFGHANISTAN REGISTERED VEHICLES ALLOWED TEMPORARlLY IN PAKISTAN ALLOWED TO NGO'S FOR THEIR USE AT HEAD QUARTERS

IN PESHAWAR/ ISLAMBAD UNDER BOARD'S CGO NO. __________DATED___________

S.No Name of

NGO Vehicle Model & Make

Chassis No.

Engine No.

Date of issue

Date of expiry

Remarks

24. VEHICLES ALLOWED TEMPORARILY IN PAKISTAN TO STAFF

MEMBERS OF PAKISTAN’S DIPLOMATIC MISSIONS IN AFGHANISTAN:-

(i) The Central Board of Revenue has delegated the powers vested in it under

section 21 of the Customs Act 1969 to the Collectors of Customs, Peshawar and Quetta to allow temporary importation of total number of 30 official and private vehicles by the staff members of diplomatic missions working in Afghanistan.

(ii) The Foreign Office shall send a quarterly statement in the given format to

the Board regarding the total number of vehicles allowed till the end of each quarter. The board after due scrutiny shall forward the statement to Collectors of Customs, Peshawar and Quetta.

(iii) Collectors of Customs, Peshawar and Quetta shall also maintain record of

these vehicles and shall ensure that the facility is not misused by unscrupulous elements.

STATEMENT SHOWING AN UPDATED LIST OF THE PARTICULARS OF

59

OFFICIAL AND PRIVATE VEHICLES ALLOWED TEMPORARILY IN PAKISTAN TO STAFF MEMBERS OF PAKISTAN’S DIPLOMATIC MISSIONS IN

AFGHANISTAN.

S.# Name of Officer

Vehicle NO. along with Model & Make

Chassis No.

Engine No.

Date of posting

Date of transfer

Remarks.

25. PROCEDURE FOR FORWARD MOUNTING BASE (FMB) AT KARACHI

OF THE INTERNATIONAL SECURITY ASSISTANCE FORCE FOR AFGHANISTAN (ISAF) AND SIMILAR RELIEF OPERATIONS CONDUCTED BY THE UNITED NATIONS. (A) In line with the provisions of the Custom Act, 1969 (IV of 1969) read with

Ministry of Defence (I.S.Wing U.O.No.7/1/D-2002 dated 15.1.2002 ,Central Board of Revenue is pleased to simplify the procedure for smooth operation of the forward Mounting Base (FMB) ,international Security Assistance Force (ISAF) for Afghanistan and similar relief operations by the United Nations.

(i) The Officer commanding of the said Base or the U. N bodies shall

designate an officer/ authorized agent to interact with the Pakistan Customs Authorized and to sign documents/ declarations in this behalf .Specimen Signature of the authorized representative shall be circulated.

(ii) Office of the Additional Collector of Customs (Preventive). Quaid

-e- Azam International Air Port would serve as Customs focal point to maintain Liaison with the ISAF/ U.N bodies through respective agents if any.

(iii) The civil Aviation Authority too, shall designate an officer to

coordinate with Customs regarding the movement and expeditious port clearance of the departing ISAF aircraft and those cleared air craft carrying U.N relief goods.

(iv) Soon after Landing/ arrival of the UN Vessel/ Aircraft the F.M.B/ U.N. authorized representative shall file with the customs a duly signed Cargo manifest separately detailing the following information:-

- Detail of goods entered into Pakistan for local consumption at the Karachi.

- Detail of goods to be transshipped to another port, Airport or land custom station within Pakistan for the onward transportation to Afghanistan.

60

- Detail of goods to be transshipped to Afghanistan directly from the port/ Airport of initial landing/ arrival.

(v) The Customs Authorities shall retain the original cargo manifest

and hand over the duplicate to the F.M.B/U.N. bodies representative with the advice/ permission regarding further requisite action then and thereon. Special IGM Clearance .Cells shall be created at the Port as well Air Freight Unit, Karachi Airport to handle these operations.

(vi) In case of goods to be moved into Pakistan for home consumption

the F.M.B/ U.N , would file a separate customs declarations i.e, Bill of Entry. this declarations shall be processed / assessed to duty and taxes as per Law and the laid - down procedure unless specifically exempted by the Federal Government or the Board.

(vii) In case of goods involving transits movement within Pakistan prior

to entry into Afghanistan the Customs Administration the of the initial place of landing/ arrival shall provide customs escort, and handle requisite documentation / formalities. However , Movement from one Port to another port within the same station shall be covered by simple internet documentation and that from Port/ Airport to a border based customs station shall be against a proper customs declaration i.e, Bill of Entry.

(viii) In case of goods to be transshipped directly to Afghanistan from

the initial station of landing/ arrival the movement of goods/ store from one Air Craft to another shall be under prior intimation to the customs. Such a transshipment would be allowed without levying any transshipment fee and without payment of duty and taxes.

(ix) Against every departing vessel/ Air Craft the F.M.B/U.N. bodies

shall file an Export Manifest separately detailing the following information;

- Goods which are being transshipped. - Goods Which have been locally procured in Pakistan.

(x) The F.M.B/U.N bodies shall advise the supplier of locally procured

goods to enter the goods to the Port/ Airport bonded area along with the customs declaration i.e. Bill of Export. The Pakistan based supplier/ exporter of such goods duly covered by the bill of export shall be entitled to payment of duty draw back as per the notified rates, Such an entitlement would NOT be available if the F.M.B/U.N, bodies themselves file a bill of Export on self clearance basis. If, however, goods have been locally procured by the F.M.B/U.N. bodies against a payment in local currency such

61

goods shall be allowed entry by the customs against a written request in this regard by the F.M.B/U.N bodies.

(xi) The personal effects. Baggage of the Karachi based ISAF

personnel or those arriving for an extended stay shall be cleared by customs under Chapter III of Pakistan Customs Baggage Rules 2001 catering for the privileged persons. Following customs concessions, in brief, shall be available.

a) Duty and tax free import of personal and household effects

(including a car) for a period of six months. b) Duty and taxes free import of foods stuff etc. (liquor tobacco)

up to the C&F value of US $200 on first arrival and then against prescribed monthly quota.

(B) Officer Commanding, F.M.B, I.S.A.F, Karachi shall furnish and certify

the list of locally stationed I.S.A.F, Personal qualified to receive customs concession as privileged persons . The I.S.A.F, personnel too arriving for a brief stay over shall be expeditiously cleared by customs on the basis of written/ verbal accompanied baggage declarations.

(C) Banned/ restricted items of import/ export will not be covered except in

terms of provisions of Export Policy & Procedure Order and Import Policy & Procedure Order. This issues with the concurrence of Ministry of Commerce.

26. PROCUREMENT OF DUTY FREE LOCAL ASSEMBLED VEHICLES BY

DIPLOMATIC REPRESENTATIVES/ DIPLOMATIC MISSIONS/ PRIVILEGED PERSONS (AS PER MODEL RULES) AND ORGANIZATIONS ETC, ELIGIBLE TO IMPORT DUTY FREE VEHICLES.

The diplomatic representatives, diplomatic missions, privileged persons (as per Model Rules) and organizations etc which are eligible to import duty free vehicles, have been allowed duty free procurement of local assembled vehicles by the Government of Pakistan vide its notification S.R.O _____ (I)/2001 dated 7.9.2001. In this regard, the following procedure is devised:

i) The vehicles shall be procured from recognized local manufacturers. ii) Only vehicles entitled for importation would be procured. iii) Actual amount of customs duties already paid on instant CKD kits by

recognized local manufacturer shall be adjusted against future clearance on production of proper receipt/delivery order.

iv) The concerned Collector will ensure the maintenance of the relevant

record in order to ward off the misuse of this facility and any evasion of duty/taxes.

62

v) This arrangement is subject to the conditions that the vehicles so procured would not be sold or otherwise disposed off without Board’s prior approval and without payment of duty/taxes.

27. IMPORT PERSONAL AND HOUSEHOLD EFFECTS BY NON-

DIPLOMATIC STAFF MEMBERS OF FOREIGN DIPLOMATIC MISSIONS.

The Central Board of Revenue vide its Office Memorandum No. 9(69)CI/68, dated 22nd January, 1989 fixed the time limit of six months within which personal and household effects of non-diplomatic staff members of foreign diplomatic missions could be allowed duty and taxes free import. Keeping in view the difficulties faced by the non- diplomatic staff of the foreign missions in approaching its office at Islamabad, the Central Board of Revenue directed that condonation upto three months may be allowed by the concerned Collectors of Customs at their own level on the basis of the recommendations of the Ministry of Foreign Affairs and merits of the case. 2. The Collectors will, however, not further delegate these powers to any officer subordinate to them. 28. PROCEDURE FOR CLEARANCE OF VEHICLES BY DISABLED

PERSONS. For smooth clearance of motor vehicle upto 1350CC by disabled persons, the Central Board of Revenue issueed the following procedure:-

(i) Only those persons shall be entitled to import the vehicle who have been

issued a disability certificate by the Federal Board for Disabled Persons and in case of war disabled defence forces personnel by the high powered Board of the Joint Staff Head Quarters;

(ii) The vehicle shall not be sold or transferred to any person before the expiry

of five years from the date of its arrival in Pakistan, except,-

(a) to a disabled person on production of a disability certificate from the said Federal Board for Disabled Persons or high powered Board in the Joint Staff Headquarter as the case may be;

(b) to the Department of Supplies, Government of Pakistan; and (c) in the case of death of the disabled person owning the vehicle

imported under Notification SRO.555(I)/98 dated 12th June,1998, by his legal heirs, to any person in accordance with the conditions (a) or (b) specified above.

2. The purchaser or transferee of the vehicle, other than a disabled person or the Department of Supplies, Government of Pakistan, shall pay the same customs-duty and sales tax as were leviable thereon at the time of its import. No customs-duty or sales tax

63

shall, however, be payable if the vehicle is sold or transferred after the expiration of five years from the date of its arrival in Pakistan. 29. PROCEDURE REGARDING CLEARANCE OF IMPORTS MADE

AGAINST GRANT AND TECHNICAL ASSISTANCE AGREEMENTS. For smooth clearance of exempt goods imported by Non-Governmental organizations (NGOs) and donor agencies for use in social welfare, charitable and developmental sector, following is the procedure:-

i) the EAD and other controlling Ministries will issue a certificate on the proforma devised as Annex-A regarding goods imported or supplied under foreign grant-in-aid in pursuance of a valid agreement signed between the Government of Pakistan and the foreign government or donor agency/NGO and duly concurred by the Central Board of Revenue. The said certificate will be issued by an authorized officer not below the rank of Deputy Secretary.

ii) The importing agency/organization shall furnish a copy of the relevant valid Agreement, Board’s concurrence and a certificate in the prescribed proforma (Annex-A) duly issued by the competent authority in the Federal Government (i.e. EAD or other relevant Ministry) to the concerned Collector of Customs stating that the goods are genuine requirement and are covered by the agreement and there is concurrence of CBR thereto.

iii) an officer of Customs, not below the rank of Additional Collector, shall

satisfy himself before allowing release of the goods, that the same are covered by the relevant provisions of the agreement and to the extent concurred by the Central Board of Revenue.

iv) the importer shall furnish an undertaking that the goods would not be sold

or otherwise disposed off without prior approval of the Board and without payment of duty/taxes and other charges leviable thereon if any. In case of non compliance of any one of the above conditions, full duty and taxes as leviable at the time of import shall be charged in addition to the penal action so warranted under the Customs Act, 1969.

v) the Collectorate shall submit a monthly report to the CBR by the 5th of

every month on the prescribed proforma as per Annex-B. 2. This procedure shall be applicable only to goods imported under the jurisdiction of Collectorate of Customs (Appraisement), Customs House, Karachi and the Collectorate of Customs, Custom House, Rawalpindi. The goods imported through other Collectorates by NGOs, and other donor agencies under bilateral agreements shall continue to be dealt in accordance with the existing procedure which envisages that the CBR will forward the certificates to such Collectorates.

64

Annex-A

This is to certify that ……………………….. as per AWB/Bill of lading No. ………….dated…………………(copies enclosed duly attested), has been imported by…………………………….under the ……………………The details are as under:-

Name of the Project ……………………………………………… Description of goods …………………………………………..…. Value of goods ………………………………………………….. Invoice No. & Bill of Lading/ AWB No & date ………………………………………………… No & date of Customs Exemption Wing CBR’s concurrence ………………………………………..

No & date of Income Tax Wing CBR’s concurrence ………………………………………… No & date of Sales Tax\ Wing CBR’s concurrence ………………………………………..

In accordance with Article ………… of the Memorandum of understanding/Agreement signed between Government of Pakistan and …………………..… on……….…………the above goods/vehicles are genuine requirement and are exempted from the levy of Customs duties, Sales Tax, Income Tax and other taxes etc. as the ………………………. has been imported by ……………………..under the ……………………The imported goods shall not be sold or disposed of without permission of Central Board of Revenue.

Signature of designated Officer of the Controlling

Ministry (EAD etc)

Annex-B

Exempted amount of

S.No

Name of the Importer

Title of the agreement

Certificate No issued by the Ministry

Description of the goods

Customs duty

Sales Tax

Income Tax

Total

1 2 3 4 5 6 7 8 9 30. SALE PERMISSIONS UNDER MODEL RULES, 1963. The concerned Collectors of Customs may grant permission for the sale of vehicles of the privileged persons at their own level.

65

2. Further that the Collectors of Customs may also grant permission for the sale of other durable articles imported by the privileged persons free of customs duty and taxes under Model Rules, 1963. Duty and taxes, if leviable, will be charged on the disposal of durable articles in terms of rule 6 of the said rules. 3. For grant of sale permission in respect of various articles imported under Model Rules, 1963, the following clarifications are issued:--

(i) a privileged person entitled to the concessions of Model Rules, 1963 can

purchase free of customs duty and taxes from another privileged person, the personal and household effects including car provided he is otherwise entitled to make duty and taxes free import of such items directly from abroad.

(ii) in case a car purchased by a privileged person from another privileged person, is subsequently disposed of to a, non. privileged person, the date of import for the purpose of assessment under Notification No. SRO 506(1)/88, dated 26th June, 1988, shall be the date on which the car was originally imported by the former owner.

(iii) the principle laid down in para (ii) above shall also apply to the other

durable articles for calculating the period of five years in terms of rule 6 of Model Rules, 1963.

The Collectors will not further delegate the powers conferred under this order to

any officer subordinate to them. 31. PROCEDURE FOR TRANSHIPMENT OF NON COMERCIAL CARGO

IN TRANSIT TO AFGHANISTAN. For movement of military and humanitarian relief subsistence cargo for international forces and diplomatic mission for transit to Afghanistan, the following procedure is prescribed :-

i) The consulate/embassy of the respective country or their authorized representative shall apply to the Collector of Customs in whose jurisdiction the transhipment goods arrive, for removal of such goods containing non-commercial government/military subsistence/cargo for Afghanistan, on the prescribed Transhipment Permit in quadruplicate.

ii) The embassy/consulate or their authorized representative shall furnish an

undertaking to the Collector of Customs concerned duly endorsed by the consulate/embassy that the goods will not be consumed in Pakistan.

iii) The transhipment goods shall be transferred to the area at ports/airports

earmarked for the purposes of stacking and storage of such goods.

iv) The shipping line/airline which has issued the through bill of lading, shall obtain a serial numbered sticker and seals and will affix the same on each transit package/container. Customs staff shall endorse confirmation to this

66

effect on Transhipment Permit filed by consulate/embassy or their representative in this regard.

v) The embassy/consulate or their representative shall apply to the officer of

Customs for removal of such package/containers at least 24 hrs before removal of such package/containers.

vi) After verifying the shipping/air line’s seal, vis-à-vis goods/container and

the reflective sticker affixed on such goods/containers, the Customs staff supervising the transhipment, shall allow loading and transhipment of such goods/containers. The original copy of the permit would be retained by Customs, at the port of origin. The rest of the copies would be handed over to the concerned embassy/consulate or their authorized representative.

vii) Such transhipment shall be allowed without levying any transhipment fee

and without payment of duties and taxes.

viii) Transportation will be made by Pakistan Railways, N.L.C., by air or by any other mode of transport specifically authorized by the Central Board of Revenue.

ix) The Custom’s staff at the port/airport of exit shall verify the shipping / air

line seal, Custom’s bullet seal and endorse the same on duplicate and quadruplicate copies of the Transhipment Permit. They shall retain the quadruplicate copy for their own record and hand over the Duplicate Copy to the transporter for resubmission by the representative of the Consulate/shipping, air line agent at the port of origin.

x) The Consulate/embassy or their representative shall resubmit the duplicate

copy at the port/airport of origin within 15 days of crossing border by the goods.

xi) In case the transhipment goods/container is damaged or the shipping/ air

line seal or Customs Bullet Seal affixed on such container is found broken or tampered with, the goods/container will not be allowed to enter Afghanistan unless the cargo contained therein is examined by the Customs staff in the presence of Consulates representative at port of exit and permission/approval of the Assistant Collector (Torkham or Chamman) as the case may be, is obtained for the entry of such goods/container into Afghanistan. Expenses, if any, incurred on examination and re-sealing of such goods/containers shall be borne by consulate or their representative.

xii) If the embassy/consulate or their representative request for the return of

the empty containers from Afghanistan the request may be acceded to subject to the condition that the procedure may be followed for movement of inland containers as laid down

67

xiii) In case any wrong doing is detected in the cargo in transit in Pakistan, the consulate/embassy, their representative/Pakistan Railways/ NLC shall be liable to pay the leviable taxes in addition to any other proceedings as envisaged in the Customs Act, 1969.

68

CHAPTER - IX

STORAGE, DISPOSAL & SAMPLING OF SEIZED AND CONFISCATED GOODS – INSTRUCTIONS REGARDING

(A) STORAGE OF SEIZED/CONFISCATED GOODS

Comprehensive orders governing appointment of State-warehouses, custodians

thereof, the receipt, storage and issue of warehoused goods are laid down as follows:-

32. STORAGE BY LAW ENFORCEMENT AGENCIES :- For Law Enforcement Agencies hereinafter referred to as Agencies, including the Civil Armed Forces of Pakistan who have been delegated anti-smuggling powers under the Customs Act, 1969. The following directions are issued for strict compliance:--

I. APPOINTMENT OF THE STATE-WAREHOUSES (1) (a) Section 169 of the Customs Act, 1969, stipulates that the goods

seized in Customs cases will be delivered to the care of any Customs Officer authorized to receive the same or the nearest Customs House or at the nearest place appointed by the Collector of Customs having jurisdiction for the deposit of things so seized, It is thus, mandatory that each Collector of Customs having jurisdiction should :--

(b) specifically issue notifications appointing State- warehouses as and when required by these Agencies; and

(c) the Custodians thereof, and regularize by formal notifications all functional state-warehouses by these Agencies. It is for the Collector of Customs having jurisdiction to select the places where State-warehouses are required and facilities exist for establishing them. Copies of all such notifications should be endorsed to the Board within 15 days. Copies of the notifications already issued in this regard are attached as Annex-I for ready reference.

(2) (a) The premises selected for the state warehouses, should be secure in all respects and all arrangements for meeting exigencies like fire etc. should be provided therein and maintained in operative conditions by these Agencies.

(b) Steel Almirahs and cash chests should also be provided by these Agencies for the storage of valuables in these warehouses which should be fixed in the walls as is required under the Treasury Rules.

69

(c) Store rooms for the storage of inflammable and dangerous goods should be according to the specifications and the regulations of the Department of Explosives for which necessary certificate from the competent authority should be obtained by these Agencies.

(d) The Heads of these Agencies will ensure that adequate guards for each state warehouse are provided.

(3) There will be the following three classes of the state- warehouses: -- (a) A Class Warehouses: At the Headquarters of these Agencies (b) B & C Class Ware- As proposed by the

houses: Heads of these Agencies and duly appointed by the Collector of Customs having jurisdiction.

II. APPOINTMENT OF THE CUSTODIANS:

In accordance with the provisions of Section 169 of the Customs Act, 1969, the Collector of Customs having jurisdiction will appoint Custodians and Deputy Custodians for these state-warehouses in consultation with the Heads of these Agencies, as under:

(1) A Class Warehouses:-- The Collector of Customs having jurisdiction will designate an officer not below the rank of a Commissioned officer/gazetted officer of the concerned Agency, duly recommended by the Head of the Agency, as the Custodian who will be assisted by a Deputy Custodian and one or more Assistant Custodians as the case may be.

(2) B Class Warehouses:--A Commissioned/Gazetted Officer Incharge of the area will be the overall incharge of such state warehouse, and any Commissioned/Gazetted Officer in the area will be designated as the Custodian who will be duly assisted by one or more Assistant Custodians.

(3) C Class Warehouses:-- The Custodian of such State- warehouse will be a Commissioned/Gazetted Officer in the area and he will be assisted by an Assistant Custodian. Seized goods should not be stored at any place except these State-warehouses. In case of goods seized at distant points, and brought to the nearest post/office of the Agency concerned, the Officer receiving such goods should forthwith arrange to send them to the appropriate State-warehouse. Accumulation of seized goods at such posts/offices should not be permitted.

III WORKING OF THE STATE-WAREHOUSES:

All goods seized will be categorized as "Valuables" and "Ordinary goods".

(a) Valuables:-- These will include gold and silver bullion, and articles made thereof, including jewellery , precious stones, and articles containing

70

them, narcotics, coins and currency, antiques, watches and any other articles which may be declared as "Valuables " by the Collector, from time to time.

(b) Ordinary goods:--All articles other than those mentioned as "valuables". IV RECEIPT OF SEIZED GOODS IN THE STATE WAREHOUSES:

1. (a) Valuables:--An inventory shall be prepared in duplicate on the spot as soon as any case involving gold, silver, currency and coins, antiques, narcotics and other valuables are detected. These valuables should then be put and placed in cloth bags. The bags should be sealed with an official seal in the presence of at least two independent witnesses or mushirs and their dated signatures should invariably be obtained on the bag itself. If the accused has no seal as he usually does not have, two paper slips should be diagonally pasted securely across the stitched or pasted portion so that the bag might not be opened without tearing the slips and the signatures obtained across these slips.

(b ) The sealed bags and packages should be sent to the Custodian concerned for safe-custody. These packages should not be opened at any stage except in the presence of the immediate Supervisory Officer. Both packages should bear on them the following information besides the seal and signature described above viz.; (i) Date and time of seizure; (ii) Place of seizure; (iii) Name with parentage and full postal address of the accused; (iv) Description of the goods seized:--

(a) Quantity. (b) Name of commodity or article. (c) Distinguishing marks if any (state serial No. in case of

currency and watches etc. (d) Trade Marks. (e) Place of Manufacture (If indicated).

(v) Name and full postal address of mushirs or witnesses.

(vi) Signature, rank and address of the seizing officer . (vii) Signature of accused or witnesses. At the time of receipt of such

packages, the Custodian should give a certificate in the format attached as Annex-II to the seizing/ depositing officer in token of the receipt.

(c) The Custodian on receipt of the packages, shall physically check the same to ascertain that these agree in quantity, sort, quality, value and all other particulars with those described in the inventory .

(d) After having satisfied himself as to the accuracy in the above mentioned manner, the Supervisory Officer will reseal the packages in the manner described in para (i) above. The Supervisory Officer and the Custodian

71

shall affix their signatures on each package with date and time clearly indicated in token of the proper sealing thereof.

(e) A certificate in the format attached as Annex-III shall be prepared and signed by tbe Custodian when he receives such package and will also paste the same certificate on the remarks column of his Store Room Register .

(f) Conditions (c) and (d) would not apply in case of seized goods for which a criminal case has also been registered. Since the subject goods of a criminal case are required to be sealed on the spot and are de- sealed only in the court of law.

2. Ordinary Goods:

(a) As soon as a seizure is made and the investigations completed, the seized goods should be dispatched under proper escort to the Headquarters A-Class State Warehouse under intimation to the Collector of Customs having jurisdiction and the Head of the Agency concerned. The Supervisory Officer should ensure that the seized goods move under proper escort and a complete and detailed inventory of the seized goods should be prepared in the format attached as Annex-IV, in quadruplicate; the quadruplicate copy should be retained in the Office dispatching the seized goods, the duplicate copy should be dispatched to the Collector of Customs having jurisdiction alongwith a copy of the movement order, the triplicate copy should be dispatched to the Head of the agency concerned alongwith the movement order and the original copy should be sent by the dispatching officer alongwith the seized goods to the Custodian of the A-Class state-warehouse. The Custodian on receipt will check the seized goods according to the quantity, description, quality and also the packing to ensure that they have been received in original condition and are free from defects and shall issue an acknowledgement on the quadruplicate copy of the inventory and hand it back to the escorting officer noting therein all the defects and shortages if any found and retain the original copy of the inventory in his office for record.

(b) In case of shortages or any other discrepancies found in the seized goods, the Custodian should, within 24 hours of the receipt of the goods, submit a report to the Supervisory Officer concerned under registered cover with a copy to the Collector of Custom having jurisdiction and, the Head of the Agency concerned for information. He should follow up the case with the Supervisory Officer concerned till it is settled. If this is not finalized within a month, the Custodian must report it to the Head of the Agency concerned for further action, with a copy endorsed to the Collector of Customs having jurisdiction.

V STORAGE OF SEIZED/CONFISCATED GOODS IN THE STATE W AREHOUSES:

(1) Valuables:

72

(a) Seized/confiscated valuables must be stored in Iron safes and steel chests which should be fixed in the walls under double lock system.

(b) Immediately on taking over the seized valuables, the Custodian should enter the same in a Stock Account which will be maintained in the form attached as Annex-V.

(c) "Valuables" will only be stored in A-Class state- warehouses .

(d) The valuables should be sent to the State Bank of Pakistan for safe custody within the shortest time practically possible, ensuring that the same are deposited in the State Bank within office hours. The entries should be immediately made in the Stock Account .

(e) All seized/confiscated valuables already stored in the Headquarters A-Class State Warehouses, should at once be sent to the State Bank of Pakistan for safe custody in the manner prescribed.

(f) A record of all seized/confiscated valuables kept in the State Bank of Pakistan should be maintained in a register in the form attached as Annex-V.

(g) Sealing of boxes for dispatch to the State Bank of Pakistan: Each box should be securely sealed to ensure that even if the box gets unlocked. it should not open without breaking the tape of the string and the seals. As a measure of further precaution, the key hole should be covered up by pasting a slip of paper containing the signature of the Custodian of the State-warehouse. Similarly, two or more slips about 4" long containing the signatures of the Custodian should also be pasted in such a way so that half of it should be on the lid and other half on the other side of the box.

(h) Custody of keys of the boxes and seals: (i} Both the keys of boxes should be placed in a cotton bag of

small size by the Custodian as soon as the box is sealed. There is no objection in keeping the keys of more than one box together, but each bag should be sealed and assigned a number .

(ii) The particulars of each bag should be recorded in a register in the form attached as Annex- VI. The seals should also be kept in envelopes which should also be likewise numbered and entered in this register. It should be closed and signed with the date and time recorded by the Custodian at a number of places so that it should not be opened without tampering with or tearing the signatures. The bags, envelopes and registers will regularly be examined by the Custodian and all Inspecting Officers to ensure that they are kept in accordance with the instructions. The result of each inspection shall be recorded in the register by the Custodian and such inspecting officer under their dated signatures with the time of inspection indicated.

73

(iii) The bag containing keys of boxes kept in the State Bank of

Pakistan, the other seals of state-warehouse and the envelopes containing the seals put on boxes sent to the State Bank Pakistan and Iron seals intended for putting mark of identification on gold bars, should be kept in an iron almirah or steel box with double locks. The key of single lock of this aimirah or box should be kept by the Custodian and the other by the Deputy Custodian. This box should always be opened and locked in the presence of the Custodian and Deputy Custodian. It will, however, be the responsibility of both to keep this safely and untampered.

(2). Ordinary Goods:

(a) The Custodian will maintain a register to be called "Stock Register" in the

form attached as Annex-VII in which he will enter all the seized goods received by him for storage in the State Warehouse in chronological order. He will allot a separate: number to each consignment received. Each entry of the seized goods received will be attested by the Custodian in token of the correct entry having made.

(b) The Custodian will be held responsible for shortages and defects found subsequently and recorded in the inventory at the time of stock taking as mentioned above.

(c) The guards for escorting the seized goods will be provided by the Supervisory Officer in the manner considered safe and adequate by him.

(d) All receipts and clearances into and from the State Warehouse will be in the physical presence of the Custodian. He will be personally responsible for the proper accounting of the seized/confiscated goods stored in the State Warehouse. He will be provided with adequate staff to guard the State Warehouse round the clock and will be responsible for ensuring that the guards perform their duties effectively. The guards should not be utilized for any other work without the written orders of the Supervisory Officer .

(e) The Custodian will inspect the seized/confiscated goods stored in the state-warehouse every week to ensure that they are not damaged or spoiled by pests and insects.

VI INSPECTION OF SEIZED GOODS AND SAMPLING THEREOF.

(I) Valuables:

(a) Whenever valuables are required for inspection by the adjudicating officer. a notice should be sent well in advance under Registered

74

cover to the accused asking him to appear on the date and time fixed for this purpose. A notice should also simultaneously be issued to the Custodian concerned to send the seized valuables through an officer (normally the one who originally seized them) for presentation on the appointed date and time. If the accused has absconded. the notice will be issued to the Custodian only. On presentation of the packages, the adjudicating officer should have the seal etc, identified and have the packet opened in his presence.

(b) As soon as the inspection is over, the seized valuables should be repacked and sealed in the manner as aforesaid in the presence of the seizing officer, the accused, if available, and the adjudicating officer, The fact that the package having thus been opened. examined and closed shall be recorded by the adjudicating officer on the package. It will then be returned to the Custodian through the seizing officer, for safe custody.

(c) Whenever any seized valuables kept in the custody of the State Bank of Pakistan are required for inspection, it will be brought out only under the orders of the Supervisory Officer concerned, and it should then be produced for inspection before the adjudicating officer by the Custodian. After it has been inspected in the presence of the Custodian and in the manner already stated above, it should be re-packed and re-sealed in the presence of these officers in like manner and then returned to the State Bank of Pakistan in the same way as it was originally forwarded.

(d) On being approached by the owner for the release of his valuables, he should first be asked to establish his identity to the satisfaction of the Supervisory Officer. The sealed package containing the valuables should then be opened in the presence of the owner, the Supervisory Officer and the Custodian for delivery. There is, however, no objection to the sealed packet being opened in the presence of the officer who sealed it, if he is readily available. After the valuables are delivered in the wake of an order by the competent authority, a proper receipt should be obtained and attested by the Custodian.

(e) The Delivery of gold and other valuables, which are brought for, deposit in the State Warehouse. should be taken by the Custodian who should carefully check the inventory already prepared in the prescribed form to be sure that correct weight of the gold and other valuables and full description including trade marks and particulars of the said valuables is carefully entered in the inventory .It should be signed by the person delivering the gold and other valuables to the Custodian. Moreover the two certificates attached as Annexures-Il & III should be properly made out. The valuables should then be put in the box and deposited in the manner prescribed.

VII. THE KEYS OF THE STATE WAREHOUSE :

75

(I) The State Warehouse will be under double lock. One key will be retained by the Custodian and the other by the Deputy Custodian.

(II) Keys of the other containers almirahs and shelves, inside the State Warehouse will be kept by the Deputy Custodian.

VIII. CUSTODY OF KEYS OF STATE W AREHOUSE

(I) Keys of the chests containing valuables will be kept in the joint custody of the Custodian and Deputy Custodian.

(II) The iron seal intended for putting marks of identification on the gold and silver etc. will remain in the joint custody of the Custodian and Deputy Custodian, who will be personally responsible for its safety.

IX. STOCK-TAKING IN THE STATE WAREHOUSE

(I) Twice a year, and also whenever specifically ordered by the Collector of

Customs having jurisdiction, the stock in the state-warehouse will be physically checked.

(II) The checking shall include:

(a) Physical verification of quantity.

(b) Physical verification of quality/sort/ description etc.

(c) The condition of storage of the goods, i.e. whether the storage is in accordance with the standing orders and whether or not the goods are deteriorating due to any unsatisfactory conditions at the place of storage.

(d) It would include an audit and scrutiny of the state-warehouse

registers and records to ensure that goods were warehoused according to the standing orders.

(e) A stock-taking report in the form attached as Annex- VII, should be prepared by the stock-taking officer, and submitted to the Collector of Customs having jurisdiction and the Head of the Agency concerned.

(III) ‘A' and ‘B’ Class state-warehouses should be checked only by a Senior

Commissioned/Gazetted Officer nominated by the Head of Agency.

(IV) ‘C' Class state-warehouses may be checked by a Commissioned/Gazetted Officer of the concerned Agency nominated by the Head of Agency.

X. INTERNAL AND EXTERNAL AUDIT OF RECORDS OF THE STATE-

WAREHOUSES

76

(I) The Internal Audit of the records of the State-warehouses of these Agencies will be conducted by the designated Auditors of the Directorate General of Inspection and Internal Audit (Customs and Central Excise) as per the annual schedule in consultation with the Heads of these Agencies and the Audit Reports will be forwarded by the Director General of Inspection and Internal Audit (Customs and Central Excise) with his observations thereof, to the Collector of Customs having jurisdiction and the Heads of these Agencies, with copies endorsed to the Board, in accordance with the existing procedure of internal auditing.

(II) The External Audit of the records of the State-Warehouses of these Agencies will be conducted by the designated Auditors of the Office of the Auditor General of Pakistan and as per the schedule, in consultation with the Heads of these Agencies and audit observations thereof will be forwarded by these Auditors to the Collector of Customs having jurisdiction and the Heads of these Agencies, with copies endorsed to the Board, in accordance with the existing procedure of external auditing.

ANNEX.I.A

GOVERNMENT OF P AKISTAN COLLECTORATE OF CENTRAL EXCISE AND LAND CUSTOMS, LAHORE

NOTIFICATION

Lahore. the 4th November, 1978

PAKISTAN RANGERS HEADQUARTERS IN LAHORE AND IN BAHAWALPUR APPOINTED

TO BE PLACES FOR DEPOSIT OF THINGS SEIZED BY THE RANGERS.

. S.R.O. 1330(1)/78.-In exercise of the powers conferred by sub-sections (I) and (3) of section 169 of the Customs Act, 1969 (IV of 1969), the Collector of Customs, Lahore, is pleased to appoint Pakistan Rangers Head-quarters situated at the under mentioned places, to be places for the deposit of things seized by the Rangers as shown against each, under the provisions of the said Act and is also pleased to authorise an Officer of the Pakistan Rangers not below the rank of a Commissioned Officer to be Officer to receive the things seized by Pakistan Rangers. The Warehouses shall not be allowed to store the explosives unless permitted by the Inspector of Explosives:

(i) Pakistan Rangers Head- For storage of things quarters situated at Ghazi seized by Chenab and Road, Lahore. Sutlej Rangers.

(ii) Headquarters Desert For storage of goods

Rangers Baghdad Road, seized by Dezen Bahawalpur. Rangers.

MUHAMMAD AKBAR

Collector of Customs.

77

ANNEX-I-B GOVERNMENT OF PAKISTAN

COLLECTORA TE OF CENTRAL EXCISE AND LAND CUSTOMS, LAHORE NOTlF1CATION

Lahore, the 28th March, 1979 OFFICE OF THE DEPUTY DIRECTOR, INTELLIGENCE AND INVESTIGATION, LAHORE, APPOINTED TO BE THE PLACE FOR DEPOSIT OF THINGS SEIZED BY THE STAFF OF THE DIRECTORATE OF INTELLIGENCE AND INVESTIGATION, LAHORE.

S.R.O. 286(1)/79.--In exercise of the powers conferred by sub-sections (1) and (3) of section 169 of the Customs Act, 1969 (IV of 1969), the Collector of Central Excise and Land Customs, Lahore is pleased to appoint, the office of the Deputy Director Intelligence and Investigation Customs and Excise situated at 86-E-I Gulberg-III, Lahore to be the place for deposit of things seized by the staff of the Directorate of Intelligence and Investigation Customs and Excise, Lahore under the said Act, and is also pleased to authorize the Superintendent Customs Intelligence and Investigation, Lahore of the said Directorate as laid down to receive the things seized by the said Directorate and to supervise the warehouse be warehouse shall not however be allowed to store the explosives unless permitted by the Inspector of Explosives.

MUHAMMAD AKBAR, Collector

ANNEX-II

CERTIFICATE

"Certified that I have personally examined the seals and the conditions of the bags/packages in the presence of the seizing/depositing officer and found them intact. I have entered it in my Store Room Register at serial No……………………… ………….

Signature………………………..(Dated) ……………… Custodian …………………… Copy received. Signature. …………………………………………………… (Dated) …………………………………………………… Seizing Officer , Designation.

ANNEX-III

CERTIFICATE

"Certified that I have personally examined the goods in presence of the Supervisory Officer and found the goods agreeing in quantity, value, sort, quality and all other particulars with those entered in the inventory, I have got the package(s) re-sealed in the presence of the aforesaid Supervisory Officer with my official seal and affixed my

78

signatures thereupon. I have obtained the signature of the aforesaid Supervisory Officer in witness thereof. I have entered the same in my Store Room Register at ……….. Serial No. …………………… on. …………………

ANNEX-IV

INVENTORY

I. Name and parentage of the 2. Full postal address of the

accused person. accused person. 3. Husband's name of the woman 4. Date of seizure/detention.

from whose custody the goods are seized/detained.

5. Reasons for seizure/detention. . ________________________________________________________________________ S.No. Description Quantity Value (Approximate but Remarks separately for each article)

of goods Rate Amount ____________________________________________________________________ 1 2 3 4 5 6 ________________________________________________________________________ Signature of the accused person : …………………………………………… Signature and designation of seizing officer. …………………..………… Signature with full postal address of witnesses:

(i) …………………………………………… (ii) ……………………………………………

Note: Under the heading 'description of goods' marks and inscriptions, Trade Marks if any, number in case of watches and currency notes etc. and make, should invariably be recorded besides other vital descriptions.

ANNEX-V

STOCK REGISTER OF VALUABLES ________________________________________________________________________ Sr. Date Name with Parentage Name of the No. & date of No. and full address of the officer from inventory under

Person from whose whom the value which seized possession seized valuables were

valuables valuables were recovered received received

________________________________________________________________________ 1 2 3 4 5 ________________________________________________________________________ Full Description of seized valuables

Quantity (No. of pieces or packages)

Weight Marks & number

Date of sealing

Number of boxes in which sealed

6 7 8 9 10 11

79

No. & date of letter under which valuables sent to the State Bank of Pakistan

No. of bags in which keys are kept

No. & date of adjudica-tion order

Particulars of disposal

Remarks (Date of sale to Mint and number and reference to forwarding inventory as well as the acknowledgement of the Mint should be recorded)

12. 13. 14. 15. 16.

ANNEX-VI

REGISTER OF KEYS, BAGS AND SEALS

S. No.

No. of Keys in bag

No. of boxes of which the keys are

No. of envelopes

Date and time of sealing

Date and time of opening

1. 2. 3. 4. 5. 6. No. of Bag or envelop opened

Reasons for opening

Sr. No. of Register of Valuables sent to State Bank of Pakistan

Initials of Custodian

Remarks

7. 8. 9. 10. 11. Note:-

(1) Bags and envelopes once opened should be allotted a fresh number when re-sealed.

(2) The particulars of keys should be stated in remarks column.

ANNEX-VII STOCK REGISTER FOR ORDINARY GOODS

S. No. Name with parentage of

the owner of the goods Case No.

No. & date of inventory of the goods under which received

No. & date of adjudication order

1. 2. 3. 4. 5. Date of expiry of the appeal period

Full description of the goods

Distinguishing marks

Lot No. in the state warehouse

6. 7. 8. 9. Samples drawn I II III

Rates Value S.No. of auction register prescribed

No. & date of release order under which released

10. 11. 12. 13. 14.

Details of Release Balance after release Initial of the Remarks

80

Description. Qty. Weight Of goods of goods

Descrip. Qty./Weight Of goods

Custodian/Dy. Custodian

15. 16 17 18 19 20

ANNEX-VIII

STOCK-TAKING REPORT

1. Name of the state-warehouse and class. 2. Date of the stock taking…………from…………….. to………………… 3. Name and designation of the Stock Taking Officer………………………. 4. Stock checking statement :- S.No.

Description of goods As per register Quantity Value

Description/ Quantity/ Sort

1. 2. 3. 4. 5. Description/ Quantity found

As Found Sort Quantity Value Found

Disposal Quantity Value

Particulars of Sales etc.

6. 7. 8. 9. 10. 11. 12. Quantity Shortages found

Value Reasons Remarks

13. 14. 15. 16. (5) Are the goods mentioned in the state-warehouse stacked as per standing orders ? (6) Are the accounts in order, in all respect ? If not, state the discrepancies. (7) Are the storage conditions satisfactory ? Is there any deterioration due to bad

storage conditions ? (8) Any other observations ?

Signature of S.T.O. 33. STORAGE BY CUSTOMS DEPARTMENT A procedure governing the appointment of State-warehouses the custodians thereof, the receipt, storage and issue of the ware-housed goods for compliance of the Customs department is as follows :-

I. APPOINTMENT OF STATE-WAREHOUSE.--(1) Section 159 of the Customs Act stipulates that the goods seized in customs cases will be delivered to the care of any Customs Officer Authorized to receive the same, or the nearest Custom House or at the nearest place appointed by the Collector of Customs for the deposit of things so seized. In view of the above it is necessary that each Collector should (a) specifically issue orders appointing state-warehouse and (b) the custodian thereof, and regularize by formal orders all state- warehouses already functioning. It is for the

81

Collector to select the places where state-warehouses are required and facilities exist for establishing them.

Copies of all such orders should be endorsed to the Board within 15 days of the

receipt of these instructions. (2) (i) The premises selected for the warehouse, should be secure in all

respects and all arrangements for meeting emergencies like fire etc. should. be provided and maintained in operative condition.

(ii) Steel almirahs and cash chests should be provided for the storage

of valuable articles which should be fixed in the walls as is required under the Treasury Rules.

(iii) Store-rooms for the storage of inflammable and dangerous goods

should be according to the specification and the regulations of the Department of Explosives for which necessary certificate from the competent authority should be obtained.

(iv) The Divisional Officer of the Division and Head-quarters Assistant

Collector at Headquarters will be personally responsible for providing adequate guard for each warehouse in the division/headquarters.

(3) There will be the following classes of the State-warehouse:--

(a) A Class: At the headquarters of the Collectorates.

(b) B Class: At the headquarters of the Division.

(c) C Class: At circle headquarters or at important Customs Stations (if so decided by Collector).

II. APPOINTMENT OF CUSTODIAN.-- In accordance with the provisions of section

169 of the Custom Act the Collector will appoint Custodians and duty Custodians for the warehouses.

(i) A Class Warehouses.- The Collector will designate the a Superintendent

of Central Excise and Land Customs attached to his headquarters office as the custodian in addition to his normal duties. He will be assisted by a Deputy Superintendent and one or more inspectors as the case may be.

(ii) B Class Warehouses.--Assistant Collector of the Division will be the

overall incharge, and any Superintendent posted in the Headquarters of the Assistant Collector will be the custodian. In case there is no Superintendent at the Divisional Headquarters, the Collector should designate a Deputy Superintendent instead in consultation with the

82

Assistant Collector concerned. The Custodian will be assisted by one or more inspectors.

(iii) ‘C’ Class Warehouses.- The Custodian will be the Superintendent, concerned and he will be assisted by one inspector. Seized goods should not be stored at any place except the State warehouse. In case of goods seized at distant points, and brought to the nearest Customs Office, the Customs Officer receiving such goods should forthwith arrange to send them to the appropriate State-warehouse. Accumulation of goods at such Land Customs Station should not be permitted.

III. SECURITY FROM THE CUSTODIAN FOR THE INSURANCE OF

THE STATE-WAREHOUSES.-- This issue is under the active consideration of the Board and orders will be issued in due course.

IV. WORKING OF THE STATE WAREHOUSES.-- All goods seized will be

categorized as "Valuable" and "Ordinary goods".

Valuable.-- These will include, gold and silver bullion and articles made thereof, including jewellery, precious stones and articles containing them, narcotics, coins and currency, watches and any other articles which may be declared as valuables" from time to time. Ordinary goods.— All articles other than those mentioned as valuable above.

V. RECEIPT OF GOODS IN THE WAREHOUSE.--

(i) Valuable goods.- An inventory should be prepared in duplicate on the spot

as soon as any case involving gold, silver, currency and coins and other valuable articles is detected. These should then be put and placed in cloth bags. The bags should be sealed both with official seal and the seal of the accused in the presence of the witnesses or mushirs and their dated signatures should invariably be obtained on the bag itself. If the accused have no seals, as they usually do not have, two paper slips should be diagonally pasted securely across the stitched or pasted portion so that the bag might not be opened without tearing the slips and the signature obtained across these slips.

The sealed bags and packages should be sent to the Superintendent/Custodian

concerned for safe-custody. These packages should not be opened at any stage except in the presence of an Assistant Collector. Both packages should bear on them the following information besides the seal and signature described above viz:

(i) Date and time of seizure. (ii) Place of seizure. (iii) Name with parentage and full postal address of the accused. (iv) Description of the goods seized.

(a) Quantity.

83

(b) Name of commodity or article. (b) Distinguishing marks if any (state No. in case of currency and

watches etc.) (d) Trade Marks. (e) Place of Manufacture (if indicated).

(v) Name and full postal address of mushirs or witnesses. (vi) Signature, rank and address of seizing officer . (vii) Signature of accused or witness. At the time of receipt of such

packages, the Superintendent should give a certification in the following form to the seizing/ depositing officer in token of the receipt.

"Certified that I have personally examined the seals and the condition the

bags/packages in the presence of the seizing/depositing officer and und them intact. I have entered it in my store room register at serial No.------ On----------------- Signature -------------------- Dated ------------------ Superintendent -------------------------------------- Copy received. Signature (Dated)--------------------------- Seizing Officer . Designation.

The Superintendent on receipt of the package shall have it opened in the presence

of Assistant Collector. The valuables shall be physically checked, and it will be ascertained that they agree in quantity, sort, quality, value and all other particulars with those described in the inventory.

After the Assistant Collector has satisfied himself as to the accuracy in the above mentioned manner, he will have the packages re-sealed in the manner described above. The Assistant Collector and the Superintendent Custodian shall affix their signatures on each package with date and time clearly indicated in token of the proper sealing thereof.

A certificate in the form below shall be prepared and signed by the Superintendent when he receives such packages. This certificate, the Superintendent will paste on the remarks column of his store-room register.

CERTIFICATE

"Certified that I have personally examined the goods in the presence of the Assistant Collector Mr. ----------------------- and found the goods agreeing in quantity, value, sort, quality and all other particulars with those entered in the inventory, I have got the package re-sealed in the presence of the above officer with my official seal and affixed my signatures thereupon. I have obtained the signature of the Assistant Collector in witness thereof. I have entered it in my store room register at ----------------- serial No -------------------------- on ------------

(ii) Other articles.-- As soon as a seizure is made and the investigations

complete, the goods should be dispatched, under proper escort to the headquarters State Warehouses under intimation to the Collector. The Divisional Officer should ensure that the goods move under proper escort and a complete and detailed inventory of the goods should be prepared in the form appended, in quadruplicate, one copy should be retained in the Divisional Office or the Office dispatching the goods, the duplicate copy

84

should be dispatched to the Collector alongwith a copy of the movement order, and the triplicate and quadruplicate copies should be sent by the dispatching officer along with the goods to the Custodian. The Custodian on receipt will check the goods according to the quality, description, quantity and also the packing to ensure that they have been received in original condition and are free from defects and shall issue an acknowledgement on the triplicate copy of the inventory and hand it back to the escorting officer noting therein all the defects and shortages if any found and retain the quadruplicate copy in his office for record.

In case of shortage or any other discrepancies found in the goods the Custodian

should within 24 hours of the receipt of the goods, submit a report to the Divisional Officer concerned under registered cover with a copy to the Collector for information. He should follow up the case with the Divisional Officer till it is settled. If this is not finalized within a month, he must report it to the Collector for further action.

VI. STORAGE OF GOODS IN THE STATE-WAREHOUSE.-- Valuables:--

(i) These articles must be stored in iron safes and steel chests which should be fixed in the walls under double lock system.

(ii) Immediately on taking over the goods the Custodian/ Deputy

Custodian should enter the same in a stock account which will be maintained in the following form.

(iii) "Valuables" will only be stored in 'A' and 'B' class warehouses.

STOCK REGISTER OF VALUABLES S.No Date Name with parentage and full

address of the person from whose possession goods were received.

Name of the officer from whom received

No. & date of inventory order which received.

1. 2. 3. 4. 5. Description of articles

Quantity (No. of pieces or packages)

Weight Marks and number

Date of sealing

Number of boxes in which sealed

6. 7. 8. 9. 10. 11. No. & date of letter under which sent to State Bank

No. of bags in which keys are kept


Particulars of disposal

REMARKS (Date of sale to Mint and number and reference of forwarding inventory as well as the acknowledgement of Mint should be recorded.

12. 13. 14. 15. 16.

85

(iv) As soon as possible, the valuables should be sent to the State Bank of Pakistan for safe custody and the entries in the stock account should be immediately made.

(v) Sealing of boxes for despatch to State Bank of Pakistan :-

All valuables already stored in the Headquarters State-Warehouses, and those which are received in future should be at once sent to the State Bank of Pakistan for safe custody in the manner prescribed.

A record of all valuables received and kept in the State Bank of Pakistan should be maintained in a register in the form attached at Appendix V.

Each box should be securely sealed to ensure that even if the box gets unlocked it should not open without breaking the tape of the string and the seals. As a measure of further precaution the key point should be covered up by pasting a slip of paper containing the signature of the custodian (not below the rank of Superintendent). Similarly two or more slips about 4" long containing the signatures of the Custodian should also be pasted in such a way so that half of it should be on the lid and other half on the other side of the box. Custody of keys of the boxes and seals: Both the keys of boxes should be placed in a cotton bag of small size by the Custodian as soon as the box is sealed. There is no objection in keeping the keys of more than one box together, but each bag should be sealed and assigned a number.

The particulars of each bag should be recorded in a register in the form annexed.

The seals should also be kept in envelopes which should also be likewise numbered and entered in this register. It should be closed and signed with the date and time recorded by the Custodian at a number of places so that it should not be opened without tampering with or tearing the signatures. The bags, envelopes and register will regularly be examined by the Custodian and all Inspecting Officers to ensure that they are kept in accordance with the instructions. The result of each inspection shall be recorded by the Custodian and such inspecting officer under their dated signatures with the time of inspection indicated. The bag containing Keys of the boxes kept in the State Bank, the other seals of the godown and the envelope containing the seals put on the boxes sent to the State Bank and iron seals intended for putting mark of identification on gold bars should be kept in an iron almirah or steel box with double locks. The key of one lock of this almirah or box should be kept by the Custodian and the other by the Assistant Custodian. This box should always be opened and locked in the presence of the Custodian and Deputy Custodian. It will, however, be the responsibility of both to keep this box safely and untampered with in any manner .

Other goods.-- The Custodian will maintain a register to be called "Stock Register" in the

86

form attached in which he will enter all the goods received by him for storage in the State Warehouse in a chronological order. He will allot a separate serial number to each consignment received and allot a serial number to each lot. Each entry of the goods received will be attested by the Custodian in token of the correct entry having been made.

The Custodian will be held responsible for any shortages and defects found subsequently and not recorded in the inventory at the time of taking over as mentioned above.

The guard for escorting the goods will be provided by the Divisional Officer or where there is no Divisional Officer by the Circle Officer concerned in the manner considered safe and adequate by him.

All receipts and clearance into and from the State Warehouse will be in the physical presence of the Custodian. He will be personally responsible for the proper accounting of the goods stored in the State- Warehouse. He will be provided with adequate staff to guard the State-Warehouse round the clock and will be responsible for ensuring that the guards perform their duties effectively. The guard should not be utilized for any other work without the written orders of the Headquarters Assistant Collector . The Custodian will inspect the goods stored in the warehouse every week to ensure that the are not damaged or spoiled by pests and insects.

VII. INSPECTION OF SEIZED GOODS AND SAMPLING THEREOF.--

(i) Valuables;- Whenever valuable goods are required for inspection by the adjudicating officer a notice should be sent well in advance under A. D. Registered cover to the accused asking him to appear on the date and time fixed for the purpose. A notice should also simultaneously be issued to the Custodian concerned to send the goods through an officer (normally the one who originally seized them) for presentation on the appointed date and time. If the accused has absconded the notice will be issued to the Custodian only. On presentation of the packages the adjudicating officer should have the seal etc. identified and have the packet opened in his presence.

As soon as the inspection is over the goods should be repacked and sealed in the manner as aforesaid in the presence of the seizing officer, the accused, if available, and the adjudicating officer. The fact that the package having thus been opened, examined and closed shall be recorded by the adjudicating officer on the package. It will then be through the seizing officer, for the safe custody.

Whenever any article kept in the custody of the State Bank of Pakistan is required for inspection, it will be brought out only under the orders of the Assistant Collector concerned and it should then be produced for inspection before the adjudicating officer by the Custodian. After it has been inspected in the presence of the Custodian and in the manner already stated above it should be repacked and re-sealed in the presence of these officers in like manner and then returned to the State Bank in the same way as it was originally forwarded.

87

Similarly, when gold is required to be sent to the Mint, it should be sent under the signature and authority of the Assistant Collector concerned and under the cover of the prescribed inventory and instruction already existing on the subject.

(ii) On being approached by the owner for the release of goods he should first

be asked to establish his identity to the satisfaction of the Assistant Collector and the existing procedure of identification in which attested photograph and an affidavit is obtained should be followed. The sealed package containing the goods should be then opened in the presence of the owner, Superintendent and the Custodian for delivery. There is however no objection to the sealed packet being opened in the presence of the officer who sealed it, if he is readily available. After the goods are delivered a proper receipt should be obtained and attested by the Custodian.

(iii) The gold and other valuables which are brought for deposit to the State

Godown, delivery should be taken by the Custodian who should carefully check the inventory already prepared in the prescribed form to be sure that correct weight of the gold and full description including trade marks and particulars of the above goods are carefully entered, in the inventory, and it is signed by the person delivering the gold to the Custodian as well as the two certificates are properly made out. The good should then be put in the box and deposited in the manner prescribed.

IX. THE KEYS OF THE STATE- WAREHOUSE: (i) The State-Warehouse will be under double lock. One key will be retained

by the Custodian and the other by the Deputy Custodian.

(ii) Keys of the other containers, and almirahs and shelves inside the State-Warehouse will be Kept by the Deputy Custodian.

(iii) Keys of the chests containing the valuables will be kept in the joint

custody of the Custodian and Deputy Custodian.

(iv) The iron seal intended for putting marks of identification on the gold and silver etc. will remain in the joint custody of the Custodian and Deputy Custodian and who will be personally responsible for its safety. Whenever this seal be required to be sent to Lahore or elsewhere it should be carried by the Custodian or Deputy Custodian personally.

No exception allowed unless written orders are issued to the contrary by

the Board. X. STOCK TAKING IN THE STATE-WAREHOUSE :

88

(i) Twice a year, and also whenever specifically ordered by the Collector, the

stock in the warehouse will be physically checked: (ii) The checking shall include:--

(a) Physical verification of quantity. (b) Physical verification of quality /sort/ description etc. (c) Value. (d) The condition of storage of the goods, i.e. whether the storage is in

accordance with the standing orders and whether or not the goods are deteriorating due to any satisfactory conditions at the place of storage.

(e) It would include an audit and scrutiny of the warehouse registers and records to ensure that goods were warehoused according to the standing orders.

(f) A stock-taking report in the form at Annex IV, should be prepared by the stock taking officer, and submitted to the Collector.

(iii) Ist and 2nd class warehouses should be checked by only a Class 1 Officer. (iv) Class ‘3’ warehouses may be checked by an officer not lower than a

Superintendent of Customs.

ANNEX-I

STOCK REGISTER FOR ORDINARY GOODS S. No. Name with

parentage of the owner of the goods

Case No.

No. & date of inventory of the goods under which received


1. 2. 3. 4. 5. Date of expiry of the appeal period

Full description of the goods

Distinguishing marks

Lot No. in the state warehouse

6. 7. 8. 9. Samples drawn I II III

Rates Value S.No. of auction register prescribed

No. & date of release order under which released

10. 11. 12. 13. 14.

Details of Release Description. Qty. Weight Of goods of goods

Balance after release Descrip. Qty./Weight Of goods

Initial of the Custodian/Dy. Custodian

Remarks

15. 16 17 18 19 20

89

ANNEX-II REGISTER OF KEYS, BAGS AND SEALS

S. No. No. of

Keys in bag

No. of boxes of which the keys are

No. of envelopes Date and time of sealing

Date and time of opening

1. 2. 3. 4. 5. 6. No. of Bag or envelop opened

Reasons for opening

Sr. No. of Register of Valuables sent to State Bank of Pakistan

Initials of Custodian

Remarks

7. 8. 9. 10. 11.

Note:- (3) Bags and envelopes once opened should be allotted a fresh number when

re-sealed. (4) The particulars of keys should be stated in remarks column.

ANNEX-III

INVENTORY I. Name and parentage of the 2. Full postal address of the

accused person. accused person. 3. Husband's name of the woman 4. Date of seizure/detention.

from whose custody the goods are seized/detained.

5. Reasons for seizure/detention. . ________________________________________________________________________ S.No. Description Quantity Value (Approximate but Remarks separately for each article)

of goods Rate Amount ________________________________________________________________________ 1 2 3 4 5 6 ________________________________________________________________________ Signature of the accused person : …………………………………………… Signature and designation of seizing officer. …………………..………… Signature with full postal address of witnesses:

(ii) …………………………………………… (ii) ……………………………………………

Note: Under the heading 'description of goods' marks and inscriptions,

Trade Marks if any, number in case of watches and currency notes etc. and make, should invariably be recorded besides other vital descriptions.

90

ANNEX-IV STOCK-TAKING REPORT

5. Name of the state-warehouse and class. 6. Date of the stock taking…………from…………….. to………………… 7. Name and designation of the Stock Taking Officer………………………. 8. Stock checking statement :- S.No. Description of goods As per register Quantity

Value Description/ Quantity/ Sort

1. 2. 3. 4. 5. Description/ Quantity found

As Found Sort Quantity Value Found

Disposal Quantity Value

Particulars of Sales etc.

6. 7. 8. 9. 10. 11. 12. Quantity Shortages found

Value Reasons Remarks

13. 14. 15. 16. (9) Are the goods mentioned in the state-warehouse stacked as per standing orders ? (10) Are the accounts in order, in all respect ? If not, state the discrepancies. (11) Are the storage condition satisfactory ? Is there any deterioration due to bad

storage conditions ? (12) Any other observations ?

Signature of S.T.O. 34. DISPOSAL OF SEIZED / CONFISCATED GOODS BY

THE AGENCIES & CUSTOMS DEPARTMENT: a) The following procedure for the disposal of seized/ confiscated goods is to

be strictly followed by all concerned :--

(I) Narcotics, liquor, expired/banned drugs, acetic anhydride,

medicines, chemicals, absence films and literature and other goods which are health/environment hazards or are not fit for human consumption, shall be destroyed. Committees for the destruction of such goods may be constituted by the Collector of Customs having jurisdiction, in consultation with the Heads of Agencies (where required). The process of destruction will be finalized in consultation with PCSIR, Central Testing Laboratory or any other expert agency, where necessary, to eliminate the possibility of environmental pollution. Opium shall, however, in the first

91

instance be offered to the Government Opium Factory, Lahore. For disposal of Narcotics the guidelines as laid down in at S.No. 35 & 36 below may be complied with as well.

(II) Gold/Currency.-- The confiscated gold should Continue to be

deposited with the State Bank of Pakistan as per the above procedure. However, the confiscated currency should be directly tendered to the National Bank of Pakistan for realization and credit of proceeds to the appropriate Government account. The cases involving currency should be decided expeditiously. If the period for exchange of such demonetized currency notes, coins has already expired the State Bank of Pakistan may be asked to accept such notes for destruction etc. A certificate of destruction will be issued by the State Bank of Pakistan which should be retained for audit purposes. If currency notes (legal tender) are found to be defective damaged, mutilated or forged they should be tendered to State Bank Pakistan for necessary action as required under the Rules.

(III) Silver.--Grading of silver ripe for disposal will be carried out by

Pakistan Mint, Lahore. In case Pakistan Mint, Lahore is interested in buying the silver, the same will be offered to it at the current value of silver reported in the press. Otherwise, the confiscated silver shall be auctioned in accordance with the Auction Rules, 1996.

(IV) Precious stones.--Grading and valuation of confiscated/seized precious stones will be done by Customs Valuation Committee constituted on Collector basis in consultation with the experts of Gemstones. On the basis of the grading and valuation, confiscated precious stones will be offered for sale.

(V) Consumer durables & other miscellaneous goods.-- Consumer durables like TVs, VCRs, refrigerators. deep freezers, micro-wave-ovens, etc. and other goods, when ripe for disposal, may be offered for sale at prices pre-determined by the Controller of Customs Valuation, in the first instance, to the Utility Stores Corporation of Pakistan, Canteen Stores Department, Co-operative Stores (Co-op) Organizations of the Provincial Governments, the National Logistic Cell, Frontier Corps, Baluchistan and NWFP and the Garrison Welfare Shop, Peshawar Cantonment, for disposal through their retail outlets. The Custodian of the warehouse shall be held responsible, if, any item is sold to the above mentioned agencies/organizations at lesser prices than the prices pre-determined by the Controller of Customs Valuation. The list of items not mentioned in the Controller of Valuation Advice shall be sent to the Collectorate for appraisal of its price before it is offered for sale to the authorized agencies.

(VI) Cigarettes.--Confiscated/seized cigarettes will be offered to PIA/Duty Free Shops on appraised value with 25% discount.

92

(VII) Motor vehicles.- “Operational Vehicles” as defined in rule 2 (VII) of the Rules for the use of Staff Cars, 1980 which are ripe for disposal and have been deposited with Customs will be handed over to the respective seizing agency having anti-smuggling powers, Collectors will ensure that no delay is caused and the confiscated vehicles are handed over to the seizing agency for operational duties. Motor launches used in the carriage of smuggled goods will also be handed over to the respective seizing agency for operational duties.

(VIII) Arms and Ammunition:- Arms and Ammunition of prohibited and

non-prohibited bores will be allocated to an agency/department having anti-smuggling powers for their official use. Collectors of Customs will ensure that no delay is caused and the confiscated arms and ammunition ripe for disposal are handed over to the seizing agency.

(IX) Antiques.--Antiques shall be handed over to the Department of

Archaeology, free of cost. (X) Mobile telephones. batteries. pans and accessories thereof.--

Confiscated/seized mobile/cellular telephones, batteries or pans and accessories thereof ripe for disposal will be offered for sale to the highest bidder by inviting sealed bids/tenders from authorized importers/companies authorized to operate mobile telecommunication services like M/s. Pakistan Telecommunication Limited (PTCL), M/s. Mobilink Ltd., and M/s. Paktel Ltd. etc.

(b) Seized/confiscated goods that cannot be disposed of in any manner

specified above should be sold by the respective Agencies, in accordance with the prescribed Auction Rules in the presence of Assistant Collector of Customs incharge of auctions of the respective Collectorate of Customs. The goods would be disposed off through an open public auction on the values determined by the Customs Appraising Staff of the Collectorate concerned. The auction proceedings would be finalized by the concerned Collectorate in accordance with the provisions of the Auction Rules, under (Customs Rules, 2001 vide SRO 450(I)/2001 dated 18.06.2001) 1996. If any claim of refund comes up later in respect of the goods disposed of in any of the aforesaid manners, the same, where admissible, should be met from the general account relating to the sale proceeds in question.

35. STORAGE/ SAMPLING OF SEIZED HEROIN AND OTHER

NARCOTICS: Following is the procedure regarding sampling, testing and storage etc. of seized/confiscated heroin and other narcotics:--

93

(i) The seizing officer / officials shall conduct an on the spot test with field

kits to satisfy themselves that the seized substance is heroin. The officer performing the test with field kit shall prepare a written memo to the effect that he performed the test and it showed positive result about the presence of heroin etc. and other officers/staff accompanying him shall sign the written memo as witnesses to the said test. The fact about the test with field kit and the positive result shall invariably be mentioned in the FIR and AIR.

(ii) After seizure of heroin and other narcotics three samples shall be drawn.

Each sample will be carefully placed in a polyester /polythene bag 8 x 10 cm avoiding contact with moisture and heat. The bag should be sealed electrically (with a domestic hand sealer), with due care not to allow the sample to come in contact with the hot part. The sealed polyester polythene bags shall be further sealed in a cloth bag 12 x 15 cm with the conventional lac seals. The seizures should be sampled for laboratory examination according to the following minimum quantities:-- 1. Heroin 5 gm Approximately 2. Charas/Cannabis/Hashish 10 gm Approximately . 3. Hashish oil 10 gm Approximately 4. Opium 10 gm Approximately 5. Drugs in the form of 10 tablets/capsules

tablets or capsules.

(iii) Each sample will be sealed by the seizing officer who shall affix his signatures both on the polyester/polythene and cotton bags alongwith his name and designation. Another officer /staff present on the spot will also sign likewise as a witness. All the signatures will be put in such a manner that; the same cannot be obliterated/destroyed without tearing or damaging the bags.

(iv) Out of the three samples drawn, one shall be sent to a customs laboratory

and the second to an independent Government Laboratory e.g. Forensic Drug Laboratory, National Institute of Health, Islamabad and PCSIR etc. for test in order to determine the percentage content of heroin alongwith the nature and percentage of residuary substances/nature of the seized narcotics. Seizing Agencies other than Customs will likewise send samples to two different laboratories. Samples will be invariably sent/ handed over to the Head of the laboratory or an officer designated by him. Proforma annexed to this order shall accompany the samples for laboratory tests. The third sample shall be deposited in the State Warehouse alongwith the seized consignment for future reference. On receipt of test reports, copies thereof shall be forwarded to the adjudicating officer and the Court before whom the accused are under trial.

(v) Narcotics and psychotropic substances will be stored in separately from

other goods in a safe/strong room which should be provided in the

94

premises of State Warehouse. Heroin has already been declared as "Valuable" are applicable to its storage etc. The heroin sealed in polyester /polythene and cotton bags shall be kept in steel almirahs /steel trunks under double lock in the State Warehouse . The safe strong room should be electronically guarded and for the safe custody of such substances close circuit TV system/burglar alarm system should be provided to guard against theft and pilferage. Where the seized consignment is heavy, the sealed polythene/plastic and cotton bags may be placed in steel trunks which shall be padlocked. All the padlocks will also be sealed and the seizing officer / depositing the seized heroin in State Warehouse will put his signatures on each padlock. The seized narcotics, particularly heroin. will be deposited in the State Warehouse not later than forty-eight hours after the seizure.

(vi) Each Director-General/Director /Collector /Head of the other seizing

Agency shall constitute a Committee consisting of officers not below the rank of an Assistant Collector/Assistant Director or an officer of equal rank and a representative of the Pakistan Narcotics Control Board (PNCB) to supervise destruction of heroin and other narcotics by burning. The confiscated narcotics will be destroyed only after the final completion of the case both in the Court of law and the departmental adjudication or after the completion of adjudication proceedings with the permission of the Court, in which case at least 3 samples will be retained in the manner as the Court directs. A written memo shall be prepared in quadruplicate at the time of destruction indicating the particulars of the case and the quantity destroyed. The officer putting the narcotics to fire shall sign the memo indicating his name and designation alongwith the place, date and time of destruction. The officer supervising destruction not below the rank of an Assistant Collector / Assistant Director or an officer of equal rank, shall countersign the same while representative of PNCB and the concerned officer of State Warehouse shall sign as witnesses. One copy each of the memo so prepared shall be placed on the record of State Warehouse; adjudication file, seizure file and the case file of the Court concerned with the trial of the case involving the narcotics in question.

2. The concerned Directors General/Directors/Collectors/Heads of the other seizing Agencies are required to make all necessary arrangements so as to enforce the provisions of sub-paras (i) to (iv) above. The provisions of sub-para (v) above concerning installation of close circuit T .V. system or burglar alarm system and storage in steel almirahs / steel trunks etc. will be enforced subject to the availability of necessary funds to procure the required equipment etc.

NARCOTICS SAMPLE ANALYSIS MEMO Agency --------------------------------------------- Description of sample --------------------------------------------- Nature of exhibit. --------------------------------------------- Weight of sample. ---------------------------------------------

95

Storage condition. --------------------------------------------- If sealed. --------------------------------------------- F .I.R. No., date, P.S. & Distt. --------------------------------------------- Case No. --------------------------------------------- Date of material seized. --------------------------------------------- Date of sampling. --------------------------------------------- Required Examination. To determine the percentage content

of heroin alongwith the nature and percentage of residuary products.

(N.B. please return the remnants Name, designation and signature of samples duly sealed and signed the forwarding officer of the seizing by the Incharge of the Laboratory agency. alongwith the test report).

EXPLANATION NARCOTICS SAMPLE ANALYSIS MEMO

Agency Name and address of senders Agency. Description of sample What the material is like; its colour, smell,

appearance etc. Nature of exhibit Whether street or pure seizure. Storage condition Whether the material before and after

sampling was kept at room temperature, air-conditioned temperature or in humid conditions.

If sealed How sealed, seal contents. Required examination For which constituents Laboratory

Examination is required.

36. DISPOSAL OF NARCOTICS Vide Presidential Ordinance No. XL of 1991 the following amendment has been made in section 516-A of the Code of Criminal Procedure 1898 (Act V of 1898):

"Provided further that if the property is a dangerous drug, intoxicant, intoxicating liquor or any other narcotic substance seized or taken into custody under the Dangerous Drugs Act, 1930 (II of 1930), the Customs Act, 1969 (IV of 1969), the Prohibition (Enforcement of Hadd) Order, 1979 (P. 0. 4 of 1979) or any other law for the time being in force, the Court may, either on an application or of its own motion and under its supervision and control, obtain and prepare such number of samples of the property as it may deem fit for safe custody and production before it or any other court and cause destruction of the remaining portion of the property under a certificate issued by it in that behalf:

Provided also that such samples shall be deemed to be whole of the property in an inquiry or proceeding in relation to such offence before any authority or court.".

96

2. The effect of the aforesaid amendment in the Code of Criminal Procedure is that henceforth narcotic drugs etc. seized under the Dangerous Drugs Act, 1930, the Customs Act, 1969, the Prohibition (Enforcement of Hadd) Order, 1979 or any other law for the time being in force, can be disposed of or destroyed with the permission of the Court without retaining the entire goods for exhibition as case property. Instead of entire case property now representative samples of the narcotic drugs can be retained and exhibited in the trial courts as case property: 3. In view of the above legal provision, disposal/destruction of narcotic drugs has become easier. Collectors may therefore take immediate action for disposal/destruction of narcotic drugs in accordance with the amendments made in section 516-A of the Code of Criminal Procedure, 1898 as mentioned above. 4. In order to ensure that the same narcotic drugs have been disposed/destroyed as were seized representative samples of the narcotic drugs may also be separately drawn and sealed at the time of disposal/destruction in presence of representatives of various agencies witnessing the destruction and their signatures may be obtained on the second samples.

Copy of Ordinance

"ORDINANCE NO.XL OF 1991, AN

ORDINANCE

further to amend the Pakistan Penal Code and the Code of Criminal Procedure, 1898.

WHERFAS it is expedient further to amend the Pakistan Penal Code (Act XLV of 1860), and the Code of Criminal Procedure, 1898 (Act V of 1898), for the purposes hereinafter appearing;

AND WHERFAS the National Assembly is not in session and the President is satisfied that circumstances exist which render it necessary to take immediate action;

NOW, THEREFORE, in exercise of the powers conferred by clause (1) of Article 89 of the Constitution of the Islamic Republic of Pakistan, the President is pleased to make and promulgate the following Ordinance:- 1. Short title and commencement.-(l) This Ordinance may be called the Criminal Law (Fifth Amendment) Ordinance, 1991.

(2) It shall come into force at once. 2. Amendment of section 392, Act XLV of 1860.-- in the Pakistan Penal Code (Act XLV of 1860), in section 392, the words "between sunset and sunrise" shall be omitted. 3. Amendment of section S16A, Act V of 1898.-- In the Code of Criminal Procedure, 1898 (Act V of 1898), hereinafter referred to as the Criminal Code, in section 516A, in the proviso, for the full stop at the end a colon shall be substituted and thereafter

97

the following further provisos shall be added, namely:-

"Provided further that if the property is a dangerous drug, intoxicant, intoxicating liquor or any other narcotic substance seized or taken into custody under the Dangerous Drugs Act, 1930 (II of 1930), the Customs Act, 1969 (IV of 1969), the Prohibition (Enforcement of Hadd) Order, 1979 (P, 0.4 of 1979), or any other law for the time being in force, the Court may, either on an application or of , its own motion and under its supervision and control, obtain and prepare such number of samples of the property as it may deem fit for safe custody and production before it or any other court and cause destruction of the remaining portion of the property under a certificate issued by it in that behalf :

Provided also that such samples shall be deemed to be whole of the property in an inquiry or proceedings in relation to such offence before any authority or court,".

4. Amendment or Schedule ". Act V or 1898.-- In the Criminal Code, in Schedule 11, in entries relating to section 472. in column 5. for the word "Ditto" the words "Not bailable" shall be substituted."

98

CHAPTER – X 37. PIA DUTY FREE SHOPS LTD.—PROCEEDURE

REGARDING:-

The following procedure is prescribed for information and compliance by all concerned. 1. Purchase and stock of goods.--M/s. Duty Free Shops Ltd. shall import goods and store the same in a Private Bonded Warehouse got licensed at each Warehousing Station. The imported goods shall be stored in such warehouse against into-bond bills of entry and the provisions of Chapter XI of the Customs Act, 1969 shall be followed. M/s. Duty Free Shops Ltd., (DFS) can also purchase confiscated goods from the various State-warehouses in Pakistan after making necessary payments of the value of the goods and shall uplift such goods from the State Warehouse to their Private Warehouse in accordance with Sections 99 to 101 of the Customs Act, 1969, as the case may be. The Bond Officer Incharge of the Warehouse shall make necessary entries in the Warehouse Stock Register. The D.F.S. may also sell goods from their warehouses (not from the Shop's sales outlets) to other private warehouses of airlines and diplomatic stores in accordance with the procedure prescribed in Sections 99 to 101 of the Customs Act, 1969 provided they receive the payment of the cost of import for such sale in foreign exchange. Likewise M/s. DFS can purchase permissible goods from other warehouses in Pakistan and bring the same to their own warehouse in accordance with the procedure prescribed under Sections 99 to 101 of the Customs Act, 1969, for subsequent sale through their shop outlets . 2. Issue of bonded stores to the sales outlet or the Duty Free Shops Limited.-- The goods from the DFS warehouse shall be issued against an indent to be placed by the authorized officer of the DFS Outlet in the form prescribed at Annexure “A”. The goods will be escorted by a Customs Officer to the individual DFS Outlet where they will be entered in the respective Sales Outlet Stock Register by its Incharge and countersigned by the escorting officer. A duly-receipted copy of the indent shall be returned to the Warehouse for record. 3. Airport outlets.-- The Duty Free Shops Ltd., may set up Sales Outlets in the International Lounges of the Airports. Sales from the respective Outlets will be allowed to the bona fide International passengers arriving, departing or in transit against the issuance of invoices as per proforma at Annexure “B”. Periodic scrutiny of sales and stocks will be made by the Shift Incharge or the Customs Officer Incharge or his superior officers to ensure that items have been sold only to bona fide passengers. While selling taxable item or items in commercial quantities to the incoming passengers, the DFS Terminal Outlet Supervisor /Sales Staff shall inform the Customs Officer Incharge of the Shift. 4. City complex.-- The Duty Free Shops Ltd. will also establish bonded sales outlets duly licensed in major cities outside the Airport area for sale of goods against payment in foreign exchange by incoming passengers against their baggage allowances and I.T.C. limits. The passenger intending to make purchases from the city outlets of the DFS will have the choice to buy items upto his entitlement of free and taxable allowances under relevant baggage rules applicable in each case. However, the items permissible free of

99

duty under the Passengers (Non-Tourist) Baggage (Import) Rules, 2001, vide SRO 450(I)/2001 dated 18.06.2001 shall be allowed to be sold to the passengers under aforesaid rules only. In case of failure these allowances shall stand forfeited unless otherwise admissible under the Gift Scheme of the Baggage Rules. The passengers can purchase goods from the DFS City Outlets within 90 days from the date of their arrival and this period shall not be extended in any case.

(i) The Duty Free Shops Ltd., will make arrangements for proper display and guidance to the passenger, baggage allowances and the prices of the goods in the Shop. The passenger will be free to choose items upto the balance of his free and taxable allowances on the basis of the I. T .P .in Pakistani currency and will order for the items selected for purchase and/or Transfer of Residence form before the sales counter. The Sales person will draw up a serially-numbered sales invoice (six copies in the form prescribed at Annex "C"). Thereafter, the sales staff shall detach one copy for their record and give 5 copies of the invoice to the passenger to be presented before the Customs Officer who will scrutinize the documents/case and list of items and indicate the items admissible against the free allowances and calculate Customs dues leviable on the remaining items within the taxable allowances admissible to the passenger. The Customs Officer shall complete the assessment and shall make necessary entries and thereafter the so-assessed invoice shall be returned to the passenger. On the basis of the assessment completed by the Customs Officers, the price in foreign exchange will be deposited at the bank counter where the bank shall stamp all copies for receipt of foreign exchange and Pak currency and shall retain two copies of the receipted sales invoice and return the three copies to the storekeeper of the DFS. The storekeeper shall present the goods alongwith two copies of the receipted invoice (after retaining one of the three copies) to the Customs. The Customs Officer shall verify the goods with the receipt and shall allow out of charge after retaining one copy of the invoice. The last copy of the invoice shall be given to the passenger. The Bank shall send a copy of the invoice along with daily statement of revenue collection to the Customs Officer incharge Duty Free Shops Sales outlet who shall in turn send it immediately to Custom House Revenue Section, Audit Section and C.RA. Section as per the existing procedure.

(ii) It will be the responsibility of the sales staff of the Shop and the Customs

Officer to ensure that items purchased by the passengers are not in commercial quantities, that the sale value (ITP) has been correctly adjusted, against free allowances, that the taxable items do not exceed the ITC limit; admissible to the passenger and that no un-authorised clearance takes place from the Shop. Customs Officer shall also be responsible for making necessary entry showing the invoice number and date, the value (ITP) of the goods purchased by the passenger, the adjustment made against free allowances and taxable allowances, and the taxes recovered. Endorsement shall be retained with the Customs copy of the invoice for record and post-audit.

100

(iii) Each bonded outlet of the Duty Free Shops Limited shall maintain complete and upto-date Sale Register and Stock Register in the form prescribed in Annexure "D" and Annexure "E" respectively, which will show the stock position of the goods on daily basis. The entries in the aforesaid Registers shall be checked by the Customs Officers Incharge of the DFS Outlet at least once in a week and he shall record his dated observation and report in the remarks column of the Register on each such occasion. He shall also submit a monthly report to the Assistant Collector about the affairs of the shop outlet showing various details. In addition to this regular check the Assistant Collector /Deputy Collector and Superintendent of Customs shall pay surprise visits to ensure that no irregularity is committed. Any irregularity detected shall be reported immediately to Assistant Collector.

(iv) If the passenger desires to purchase an item within the duty free/dutiable

allowances admissible to him under the Baggage Rules or the Transfer of Residence Rules Customs Rules, 2001 and that item is not readily available at the outlet, the Duty Free Shops Limited may make advance sale of the item subject to the following conditions:--

(a) A separate invoice is issued for this purpose with the words.

"ADVANCE SALE" conspicuously inscribed on the top thereof. (b) The price of the item in foreign exchange and the taxes in Pak

Rupees shall be paid by the passenger in advance on the date of invoice. In case of such advance sale, the date of invoice shall be treated as the crucial date for the determination of value and rate of taxes applicable.

(c) Duty Free Shops Ltd. undertakes to deliver the goods within four

months of the date of advance sale or within the validity whichever is later.

(d) The advance sale is endorsed by the Customs Officer . (e) While giving delivery against invoice of advance sale, necessary

entries shall be made in the Stock Register, and the customers copy and DFS copy of the invoice shall be stamped "Delivered on (date)" and shall be countersigned by the DFSL staff and the Customs Officer .

(f) Where advance sale has been made its cancellation shall not be allowed. The passenger shall. however, be entitled to claim refund of price as well as taxes paid by him if DFSL fails to deliver the goods within the period mentioned in (c) above.

(g) Booking and delivery of goods sold in advance shall be allowed to the passenger in person and not to his representative. This condition shall be prominently indicated by DFSL on the invoice.

(v) Generally, purchase of goods in excess of the free/taxable allowances shall

not be permitted from the DFS City Outlets. However, where due to the purchase of one single item of non-commercial nature, the value exceeds the taxable allowances and makes it liable to ITC restrictions, the purchase

101

of such one single item may be allowed by the Assistant Collector of Customs provided that:

(a) The value of the item being purchased is not more than 200% of

the taxable allowances still available to him; (b) The Assistant Collector imposes a fine amounting to not less than

the amount of deficiency being adjudicated; (c) The purchase is fully covered as per documents attached to the

Customs copy of the invoice.

(vii) TV/Radio licence fee shall be paid by the Customer while purchasing such items in accordance with the existing procedure.

(viii) Where the customer so desires, the amount of duty, sales tax and other

charges may also be paid in foreign currency and in such cases the bank shall issue receipts in terms of equivalent foreign currency in terms of Board's letter No.5 (4)-L&P/82, dated 2nd February, 1982.

(ix) The passenger shall appear personally at the Duty Free Shops outlets to

purchase an item. The purchases shall not be allowed through passenger's-representative".

(x) The DFS Incharge and the Customs Officer shall ensure and verify that the

representative produces the original of the passenger's passport along with the authority and representative's Identity Card. After verifying these original documents and satisfying about the genuineness of the representative authority, the sale may be made to such representative if the authority is duly-accepted by the DFS Incharge and the Customs Incharge of the respective City Outlet. In all other cases, the sale to the representatives shall not be allowed.

ANNEXUTRE “A” DUTY FREE SHOPS LIMITED

No. of Indent ................ Date ..................... Name & Location of the Indenting Sales Outlet. ............................................................................

INDENT OF DEMAND AND TRANSFER ISSUE VOUCHER S.No. Description

of Items Accounting Unit

Total Quantity demanded

Date of Issue

Page, reference of Warehouse, Stock Register

1 2 3 4 5 6

102

Quantity Issued

Signature of the Warehouse Incharge

Signature of escorting officer

Signature of Shop (Outlet) Incharge

Page reference of the Outlet Stock Register of entry

Remarks

7 8 9 10 11 12

ANNEXURE “B”

DUTY FREE SHOP LIMITED. AIRPORT TERMINAL SHIP NO............

KARACHI/ISLAMABAD/LAHORE/PESHAWAR BOOK NO.......................................... S.NO........................................................................DATE.................................................... NAME ........................................................................ NATIONALITY................................................................... PASSPORT NO............................. .DATE & PLACE OF ISSUE...................................... FLIGHT NO............................................... FROM/TO........................................................ S.No. Item Unit Price Total qty. Total Cost TOTAL AMOUNT IN WORDS: US DOLLARS............................................................... ---------------------------------------------- ------------------------------------ E & O.E. Signature of Sales Staff................................. Staff No....................................................... No...........................................................................................................................................

ANNEXURE “C” DUTY FREE SHOPS LIMITED

(CITY SALES OUTLET) Serial No. ..................................................... Date............................................................... Name ......................................... Flight No. & Place of Landing …........... Nationality ........................................ From Where Landed ................................... Passport No........................................ Duration of Stay Abroad............................ Date & Place of Issue.......................... S.No.

Description of goods make, model and serial number if any

Unit price in foreign exchange

Quantity sold Total cost paid in foreign exchange

1 2 3 4 5 Unit ITP in foreign exchange

Total assessable value in foreign exchange

Rate of duty

Amount of duty in foreign exchange

Rate of Sales Tax

6 7 8 9 10

103

Misc. Payment Amount of Sales

Tax in foreign exchange Head Amount

Total payment of taxes & charges

Import value (Pak Rs.)

Amount of W.H.T. (Pak. Rs.)

11 12 15 15 16

Payments (Cost in foreign exchange in words) (Taxes and charges (in Pak Rs............................. Signature of the Signature of the Sales Signature of Customs Customer..................... Staff ......................... Officer ....................... & Staff No................

ANNEXURE “D” DUTY FREE SHOPS LIMITED

SALES REGISTER Page No.------------------------ S.No Date Passenger’s

name & Passport No.

Invoice No.

Description model, quantity of goods sold

Value of sale (US $)

1 2 3 4 5 6

ITP cleared free of taxes (Pak Rs.)

ITP cleared on taxes (Pak Rs.)

Total ITP (Pak Rs.)

Total taxes (Pak Rs.)

Initials of DFS Incharge

Initials of Customs Officer Incharge

Remarks

7 8 9 10 11(a) 11(b) 12

ANNEXURE “E” DUTY FREE SHOPS LIMITED

STOCK REGISTER Page No.------------------------ DESCRIPTION OF GOODS--------------------------------------- MAKE----------------------------------------------------------------- MODEL NO..-------------------------------------------------------- SIZE/UNIT OF PACKING----------------------------------------- S.No Date Into-Bond B/E. Transfer

document No. & date IGM No. & date and index No. where applicable

Quantity entered

CIF value of entry

1 2 3 4 5 6 Total in stock Stock in Hand Quantity CIF

value

Cash Memo Nos. Transfer issue No. & date

Quantity issued

CIF value of issue Quantity CIF value

Remarks

7(a) 7(b) 8 9 10 11 11(a) 12

104

ANNEXURE “F” “I, .........…........ son/daughter/wife of Mr.............................. a national of ........................... holding Passport No.............................. Issued at ............................ on ............................. do hereby authorize my ............................ ....................... (specify relation ) Mr./Mrs/ Miss................................... holder of National Identity Card No. ....................................... whose specimen signature is given below to purchase the items within the allowances admissible to me from the Duty Free Shops City Outlet at ........................... I do hereby declare that these goods shall not be sold by me or my representative in any manner.” (Specimen Signature of (Signature of the Passenger) the Representative) Full address ........................................................ Full address in Pakistan: ..............................……………………… ............................................... ................................................................... ............................................. 5. Off-the shelf delivery.-- Notwithstanding the procedure laid down in clause 4 above, items like pens, watches, clocks, cigarettes, cigars, cigarette lighters, sunglasses, calculators, audio/video cassettes, foodstuff, confectionery, perfumes and toilet requisites, shavers; cameras and camera accessories, imitation jewellery, toys juicers, toasters etc. shall be allowed to be sold within the allowances available and delivered at special counter’s in accordance with the following procedure:--

(i) For this purpose special enclosed counters shall be arranged within the display area of Duty Free Shops complexes.

(ii) Such special counters will be manned jointly by Customs Staff, bank staff

and Duty Free Shops staff. After selecting items, the passenger shall submit his documents to the Customs Officer and then make payment to the Bank Officer and take delivery of the items from the same counter .

(iii) The items so sold shall be delivered in specially made small shopping bags

and a copy of the invoice shall be stapled on the shopping bag. The shopping bag will be delivered to the passenger at the delivery point near the exit by the Duty Free Shops staff. The invoice will be collected by the uniformed Duty Free Shops employees at the exit.

(iv) Customs Staff will carry out random checks at the exit to see that the

shopping bag of a customer contains items in accordance with the invoice".

105

38. COLLECTION OF WITHHOLDING TAX: The amount of withholding tax payable either by the passenger or M/s. Duty Free

Shops Ltd. shall be paid in the following manner as prescribed under sales invoice

Annex ‘C’.

(a) In case of sale of items to a passenger covered under dutiable as well as duty free allowances permissible under the Baggage Rules, withholding tax shall be paid by the DFSL on the import value declared by them in the bill of entry at the time of in-bonding to which the goods in question relate (without addition of element of customs duty and other taxes) subject to provisions of section 25 read with section 30 of the Customs Act, 1969. Provided that the aforesaid import value and marks numbers of goods correlate with that given in the relevant into-bond bill of entry to the satisfaction of the Superintendent customs incharge DFSL. In case M/S. DFSL fail to correlate and provide the aforementioned information, withholding tax shall be charged on sale value as charged by the DFSL from the passengers. The withholding tax so recovered shall be credited to the relevant head of account.

(b) In case of sale of items covered under dutiable allowances of a passenger, the amount of withholding tax shall be charged from the passenger on the amount constituting customs duty and taxes leviable thereon. The withholding tax so recovered shall also be credited to the relevant head of account.

39. ADMISSIBILITY OF DUTY DRAWBACK: Consequent upon the Economic Co-ordination Committee's decision taken in its meeting held on the 1st December, 1985, the Central Board of Revenue extended the facility of duty drawback to locally manufactured/assembled refrigerators, air conditioners, deep-freezers, washing machines etc. sold to duty free shops, provided that payments by the Duty Free Shops are made in foreign currency and a remittance certificate from the State Bank of Pakistan or any authorized dealer in foreign exchange is produced before the customs authorities at the time of claiming duty drawback on the goods so supplied. As in the case of normal exports, CBR will determine the amount of duties and taxes paid on components/parts used in the manufacture of finished articles. For this purpose the manufacturers/suppliers of the goods may apply on the prescribed Form 'S' alongwith the required worksheets to the CBR, with a copy to the concerned Collector, Central Excise and Customs, and, in case of Karachi to the Collector of Customs (Preventive), Karachi, for survey and fixation of duty drawback rates and subsequent Notification by the Central Board of Revenue. In all those cases where duty drawback rates have already been fixed, the same would apply to all supplies made to Duty Free Shops Limited.

106

CHAPTER XI

LOCAL MANUFACTURE 40. LIST OF LOCALLY MANUFACTURED GOODS/ITEMS FOR THE

PURPOSES OF CONCESSIONARY NOTIFICATIONS ETC. The Cabinet directed the Engineering Development Board to compile a list of locally manufactured goods. The list so compiled by the EDB has been deliberated at length among the representatives of Board of Investment, Central Board of Revenue, National Tariff Commission and some representatives of the private sector. Copy of the list is below:- All the Collectors of Customs and the staff responsible for allowing concessions under different notifications/orders/deletion programmes are advised to follow this list for the purposes of allowing concessions from customs duties and sales tax etc. The information if any, alongwith evidence regarding the local manufacture of goods, not indicated in the list, may be forwarded to the CBR forthwith so that the list of locally manufactured goods/items is up-dated in consultation with the Engineering Development Board.

The Collectors are, however, authorized to allow release of goods/items indicated in the list of locally manufactured goods/items against bank guarantee for a period of three months if the importer produces a certificate issued by the renowned local manufactures of the disputed items from Engineering Development Board stating that the imported item is not being manufactured locally and the importer shall produce a clarification from CBR to this effect within the above stated period of three months.

LIST OF LOCALLY MANUFACTURED GOODS AND MACHINERY S.No. PCT Description of Goods. Specifications Names

of some Heading No. prominent

local Manufacturers ________________________________________________________________________________________________ 1. 2618.0000 Granulated Slag

Pakistan Steel, Karachi

2. 2619.0000 Slag, dross and other waste of iron or steel

-do-

3. 27.04 i) Coke 26-80 mm and above -do-

107

ii) Coke Breeze

0-25 mm

4. 2706.0000 Coal Tar -do-

5. 2833.2200 Aluminium Sulphate i)Prime Chemicals (Pvt) Ltd, Lahore ii)Feroze Chemicals (Pvt) Ltd, Swabi iii)Nowshera DDT Factory, Nowshera.

6. 2841.3000 Sodium Dichromate Hattar Chemical Haripur Industrial Chemical Ltd, Karachi.

7. 2849.1000 Calcium Carbide

Sino Pak Electrochemical Industries (Pvt) Ltd. Karachi.

8. 2836.0000 Soda Ash ICI (Pakistan) Chemical Industries ltd, Khewra

9. 3208.9000 Electric Insulating Polyurethane varnish

Simpsons Wires(Pvt) Karachi Elinvar Industries(Pvt) Ltd, Lahore.

10. 3701.3090 Aluminium Presensitized offset printing plates

Lithographic grade Dutch(Pvt) Ltd, Plot 18, Sector 28, Korangi Industrial Area, Karachi.

11. 3903.1100 Expandable Polystyrene (EPS)

GRADE EP 100, EP 200, EP 300, DP 400 and EP 500 Type LM, MS,S,SS,L & M

M/s. Pakistan Petrochemical Industries (Pvt) Ltd., Karachi

108

12. 39.03 i) General purpose polystyrene (GPPS) ii) High Impact Polystyrene (HIPS)

Having Tensile strength from 450 to 540 Kg per cm2, Flexural strength from 680 to 860 Kg per cm2, Rockwell hardness from M75 to M82, Heat deflection temperature from 78 to 94 C, Meltflow index from 3 to 8 G per ten (min). Having Tensile strength from 240 to 300 Kg per cm2, Flexural strength from 380 to 550 Kg per cm2, Rockwell hardness from L75 to L88, Heat deflection temperature from 80 to 86 C, Meltflow index from 2.7 to 9 G per ten (min).

i) M/s Pak Styrene Industries (Pvt) Ltd. ii) Pak Petrochemical Industries Pvt. Ltd. Karachi.

-do-

13. 39.04 i) PVC Resin ii) PVC Compound

Grades : AU-58, AU-60, AU-67R, AU-67S & AU-72 i) Cable Grade ii) Shoe Grade, iii) General Purpose Grade, iv) Transparent Pipe Grade

Engro Asahi Polymer & Chemicals Ltd., Karachi. Atlas Rubber & Plastic Ind,Karachi Bismillah Plastics, Karachi Boston Enterprises, Lahore

14. 3907.1000 3907.3000 3909.5000

Polyacetates Epoxide resin (Thermosetting coating powder) Polyurethanes in primary forms

All types

BASF Pakistan Ltd, karachi ICI Pakistan Ltd, Karachi Delta Industries (Pvt) Ltd, Lahore Oxyplast Pakistan(Pvt) Ltd, Karachi ISO-9002 certified.

109

15. 3917.2100 3917.2300

Polyethylene pipes. PVC Pipes, Rigid

Sizes 20 mm dia to 200 mm dia Sizes ¼” to 6” dia

Dadex Eternit Ltd, karachi. -do-

16. 40.09 Pipes & tubing of un-hardened vulcanized rubber excluding bearing API certification.

All types i)Lahore rubber Stores, Lahore ii)Longman Mills, Lahore iii)Hussain Rubber Industries, Lahore iv)Samad rubber Works Ltd, Lahore v)Darsons Rubber Works, Lahore

17. 40.11 Pneumatic Tyres for bicycles,motorcycles, cars, buses, trucks, lorries & light, medium and heavy duty vehicles excluding tyres for specialized oil field vehicles and aircraft.

The tyres/tubes of light, medium and heavy vehicles produced according to CGTI (Continental General Tires of Germany/USA).TRA(The Tire & Rim Association of USA).ETRTO (The European Tire & Rim Technical Associatio9n) and JATMA(The Japan Automobile Tire Manufacturers Association).

General Tyres & Rubber Co.Karachi Atlas Tyres(Pvt)Ltd, Karachi Delta Tyres & Rubber Co.Ltd. Islamabad. Mian Tyres & rubber Co.(Pvt) Ltd, lahore Service Industries Ltd, karachi Master Tyre & Rubber Co.Karachi United Tyres & Rubber Co. Peshawar King’s tyres (Pvt) Ltd. lahore.

18. 40.13 Inner Tubes for above tyres

-do-

19. 42.01 Belts or Belting of rubber and/or leather excluding those conforming to API specifications.

Conforming to BSS-351 & 490 (excluding grades, N 17, M 24 & above) Also conforming to DIN 22102 (excluding grades; M, N and above)

Premier Rubber Belting Mfg. Co. Karachi Also being produced in un-organized sector.

20. 44.07 Wood blocks, wood strips, wood friezers

Thickness not exceeding 6mm

110

21. 44.08 Veneer sheets and sheets for plywood (whether or not spliced)

Thickness exceeding 6 mm

i)Darsons Rubber Works, lahore ii)Longman Mills, Lahore also being produced in un-organized sector.

22. 6806.1000 -Rock wool, slag wool & mineral wool in following forms: i) Blankets of

density upto 120 Kg/M3

ii) Pipe sections upto 16” dia & density 150 Kg/m3

iii) Panels of density upto 150 kg/m3, having Temp range of 250-800 c C and Thickness 20-100 mm

Pakistan Insulation (Pvt) Ltd, Karachi Incom Rockwool (Pvt) Ltd, Hattar

23. 69.01 Bricks, Blocks, tiles and other ceramic goods of siliceous fossil meals.

Upto 1750c temperature bearing capacity.

Marshal Ceramics, G.wala General Refractories, Karachi Commander Ceramics , G.Wala.

24. 69.02 Refractory bricks, blocks, tile & similar refractory ceramic construction goods other than covered under 69.01(Exclusions: High Alumina castable/refractory for temperature above 1450c High wear & Alkali resistant silicate refractory. Megnesite Refractory High Temperature Zircon Refractory.

Bricks upto 1600c, Blocks upto 1600 c and Refractory Powder upto 1750c

-do-

25. 69.03 i) Tape hole repair mass. ii) Cold Tundish Lining sets. iii) Chrome Magnesite

Temperature bearing capacity upto 1750 c

-do- Temperature bearing capacity upto 1650 c

Banbhore Ceramic Industries, Karachi.

111

Bricks. 26. 72.01 Pig Iron, excluding that

of Foundry Grade C=4.3% (Max),Si-0.5%(Min) P=o.16%(Max),S & Mn=1% each Notches=2(Min),Wt upto 45 Kg. All types of Conversion Pig Iron (CPI)

Pakistan Steel, karachi

27. 72.06 i) Ingots and Billets of plain carbon steel, spring steels alloys for re-rolling.

ii) Semi-finished

products of iron & non-alloy steel

50mm x 50mm to 150mm x 150mm Upto 50 tons weight (single piece)

i)Pakistan Engineering Co. Lahore ii)Heaving Mechanical Complex, Taxila iii)Pakistan Steel, karachi iv)Ahmed Investment Ltd, Karachi v)Lahore Alloys Ltd, lahore vi)Nawab Shahbaz Ltd, Lahore vii)Punjab Steel Ltd, Lahore viii)Ittefaq Foundries Ltd, lahore xi)Peoples Steel Mills, Karachi

28. 72.06 Ingots & others primary forms of iron and non alloy steel (excluding iron of heading No.72.03

Ingots upto 9000 Kg weight cast in mould/ESR processed.

People Steel Mills Karachi. Pakistan Engineering Co. Lahore Heavy Mechanical complex Taxila. Pakistan Steel Karachi Ahmed Investment Ltd, Karachi Lahore Alloys Ltd, Lahore Punjab steel Ltd, Lahore Ittefaq Foundries Ltd, lahore

29. 72.07 Semi finished products of iron or non alloy steel.

Concast and hot rolled/square upto 150 x 150 mm and round upto 150 mm dia forged upto 200 mm rolling section.

-do-

112

30. 72.08 (a) Hot rolled coils of thickness from 1.6 mm to 10 mm & width upto 1510 mm

(b) H.R.Plates (c) Chequered Plates

UTS upto 370 N/mm2

Thickness upto 10 mm Upto 6 mm + 2 mm Chequers (8 mm) thickness, HRI Standard

I)Pakistan Steel, Karachi ii)Peoples Steel Mills Ltd, Karachi Pakistan Steel, Karachi Pakistan Steel, Karachi

31. 72.09 Cold Rolled coils of thickness from 0.5 mm to 1.8 mm & width upto 1220 mm (b) Hoops for baling & packing

upto 2.5 x 915/1220/950 sizes 18 mm x 18,19,20 & 25.4 mm x 16 SWG strips thickness

Pakistan Steel, Karachi i)Pakistan Engineering Co. Lahore ii)Pakistan Steel, Karachi iii)Metropolitan Steel Corp. Karachi iv) Quality Steel Works Ltd, Karachi v)Hashoo Steels Karachi .

32. 72.10

(a)Galvanized sheets and coils (all grades) of thickness from 0.5 mm to 1.5 mm and width upto 1220 mm (b)Corrugated Sheets (c) Tin plates, type

SR11 to SR 15 & DR 82 DR 10, having a thickness of 0.13 mm to 0.4 mm and width upto 965 mm

Thickness 0.5 mm and above. Conforming to European Standards EN 10002-1-1990 & EN 10203 – 1-1991

i)Pakistan Steel, Karachi ii)Tabani Corp. (Pvt) Ltd, Gadoon Amazai, NWFP. M/s. Siddique Sons Tin Plates Pvt. , Limited Karachi.

33. 72.11 Flat Rolled Products of Non Alloy (Plain Carbon) Steel of width less than 600 mm) i)Not clad, plated or coated products covered under PCT heading 72.08, 72.09 & 72.10.

Having UTS – 400 N/mm2

i) Pakistan Engineering Co, Lahore ii) Pakistan Steel, Karachi iii)Metropolitan Steel, Corp. karachi iv) Quality Steel Works Ltd, Karachi v)Hashoo Steels Karachi. vi) Peoples Steel Mills, Ltd, Karachi.

113

34. 72.13

Hot Rolled Bars & Rods of Non-Alloyed (Plain Carbon)Steel (Irregular Wound Coils)

6.4 mm to 60 mm Peoples Steel Mills Ltd, (PSM) Karachi Pakistan Steel Karachi Metropolitan Steel Corp, Karachi Pakistan Engg. Co. Lahore Hashoo Steel Karachi

35. 72.14

i)Bars for construction Industry(Plain, deformed & twisted for RCC construction)

6.4 mm to 60 mm dia

-do-

36. 7214.1000 Forged bars and rods of iron and non alloy steel not further worked than forged. Hot rolled, hot drawn or hot extruded but including those twisted after rolling.

Radial forging of rolling section from 60 mm to 200 mm.

Peoples Steel Mills Ltd, (PSM) Karachi Pakistan Steel Karachi Metropolitan Steel Corp. Karachi Pakistan Engg. Co. Lahore Quality Steel Works Ltd, Karachi Hashoo Steel Karachi.

37. 72.15 Bars and Rods 5.5 mm to 12 mm in coils

-do-

38. 72.16 Angles, shapes and sections of non alloyed (plain carbon)steel: i)HR Sections: a)Equal angles upto 150 x 12 mm thickness b) T-sections upto 75 mm size

Thickness upto 12 mm (for HR materials), length upto 12 m Blank width 100-600 mm UTS = 275 N/mm2 Excl. those conforming to ASTM A-572 or equivalent.

i)Pakistan Engineering Co. Lahore ii)Ittefaq Foundries, Lahore iii)Quality Steel Works, Karachi.

c)I-Beams (upto 200 mm height) d)Channels upto 150 mm, thickness upto 12 mm

Locally produced shapes and sections normally do not conform to DIN/ASTM/JIS/BS, Chinese and other International Standards.

114

Ii)M.S.Formed Sections by Cold Forming: a) Angle with equal

sides b)Angle with unequal sides c)Channels d)Lipped channels e)Z-section f)H-Section g) hat Section h)Profiles for auto and Railway industries.

(Blank width 100 to 600 mm and UTS upto 65 Kg/mm2 ) Thickness upto 10 mm & size 250 x 250 mm Thickness upto 10 mm and size upto 40 x 250 mm Upto IPN 450 Upto 450 x 450 Upto 250 x 250 mm

i) Pakistan Steel, Karachi ii) Metropolitan Steel Corp. Karachi i) Pakistan Steel, Karachi ii) Metropolitan Steel, Corp, Karachi iii)Ittefaq foundries (Pvt) Ltd, Lahaore

39. 72.17 Wires of Non-Alloyed(Plain Carbon) Steel

Hard Drawn & Galvanized Wires ranging from gauge 40 to 4/0 (Dia, 0.1219 to 10.160 mm) incl. Bright steel (Nail Wire) and black annealed wires (soft wire) 3-22 SWG specification BSS –1966. Galvanized wires 5-22 SWG as per BSS 443, barbed wires, 12 SWG 12 ½ SWG galvanized, arm our wire.

i) Metropolitan Steel, Corp, Karachi ii)hashoo Steel, Karachi iii)Chaudhry Wire Industries Ltd, Lahore

40. 72.18

Ingots, slabs (in moulds) , CC Billets & other primary forms and semi-finished products of stainless steel

Upto 150 x 150 mm

Pakistan Steel Mills, Karachi

115

41. 72.19

Flat Rolled plates of stainless steel having a width of 600 mm or more b) Sheets of stainless steel

Thickness upto 10 mm, width upto 1350 mm and length upto 6 M(Although thicker plates upto 60 mm are also made in non standard sizes) Conforming to all grades of AISI 300 & 400 series and equivalent 0.1-6 mm thick, width upto 1 M and length upto 3 M.

M/s Mughal Steel Industries Ltd. Lahore.

42. 72.20 Strips of stainless steel. 2 - 6 mm thick, width 100 mm

-do-

43. 7222.1100 Bars and rods of stainless steel.

Dia 20 mm and above Peoples Steel Mills Karachi. M/s Mughal Steel Industries Ltd. Lahore.

44. 72.25 Other flat rolled products of other alloy steel of a width of 600 mm or more

10 mm & above thickness

Peoples Steel Mills Karachi

45. - do- Other not further worked than hot rolled not in coils, flat rolled products of other alloy steel, of a width 600 mm or more.

-do- -do-

46. 72.26 Others flat rolled products of other alloy steel of a width of less than 600 mm

10 mm & above thickness in hot rolled conditions

Peoples Steel Mills Karachi

47. -do- Not further worked than Hot rolled flat products of other alloy steel of a width of less than 600 mm.

-do- -do-

48. 72.27 Bars & rods of silica manganese steel hot

20 mm to 60 mm Peoples Steel Mills Karachi

116

rolled in irregularly wound coils.

Metropolitan Steel, Karachi

49. 72.27 72.28

Low Alloyed Steels like spring steels & other heat treatable steels(AISI 4340, 8620, 5040 and any other heat treatable grade)

Bars upto 75 mm dia, flats upto max x 20 mm thickness & width upto 150 mm

Peoples Steel Mills, Karachi Punjab Steel Mills, Kala Shah Kakoo.

50. 72.28 Bars and Rods of Silico Manganese Steel

20mm to 60mm

Peoples Steel Mills, Karachi, Metropolitan Steel, Karachi.

51. 73.01

Cast products of Iron or Steel

i) Cast Iron upto 30 tons ii)Low alloyed Steel upto 35 tons (single piece)

i) Pakistan Engineering Co. Lahore ii)Heavy Mechanical Complex, Taxila iii) Karachi Shipyard & Engg. Works Karachi iv)Bolan Casting Ltd, Lasbella v) Naya Daur Motors Ltd, Karachi vi) Steel Casting Ltd, G.Wala vii)Peoples Steel Mills, Ltd Karachi.

52. 73.03 Cast iron spun pipes Cast iron spun pipe upto 200 mm diameter

53. 73.04 Seamless pipes of plain carbon steel

Upto 219.1 mm outer dia. Conforming to ASTM A 53 & 106 or equivalent

i) Huffaz Pipe Industries, Karachi

54. 73.05 i) Electric Resistance Welded(ERW) Galvanized Iron(G.I)and Mild Steel (M.S) Pipe ii)Steel line pipes coated with 3-layer polyethylene/ polypropylene, hypylene/ bonded epoxy resin. iii) Steel Line Pipe, Electric Resistance Welded (ERW), Electric

15-300 mm dia 6” to 90” dia. ½” to 12” dia, Grade upto X-60 API-5L, ASTM and BSS.

Karachi Pipe Mills Ltd, Karachi Pioneer Steel Mills, lahore Jamal Pipe, Ltd, Lahore Raman Pipe Lahore Shalimar Pipe Mills lahore Crescent Steel & Allied Products Ltd, Karachi Indus Steel Pipes Ltd, Karachi Data Steel Pipe Ind (Pvt) Ltd Karachi.

117

Induction Welded (EIW), Streight Seam.

BBJ Pipe Industries Pvt. Ltd. Lahore.

55. 73.06 i) Tubes upto 63.5 mm outer dia. ii) Pipes of nominal dia upto 100 mm

-do-

56. 73.06 and other respective headings

Wellhead Completion Equipment and accessories used for drilling and production of Oil and Gas from a well on shore or off shore: a) Well Head

Assemblies as per API 6A specs.

i) Casing head housing ii) Casing head spool iii) Casing hangers iv) Side outlet valves v) Weare bushing vi) Flanges vii) Secondary seals viii) Testing tools ix) Accessories like risers, spacers, spool, mud lines and suspension system. b) Tubing Head Spool,

secondary seal assembly, tubing hanger, side outlet valves, flanges, tubing head adapter, X-mas tree assemblies, chocks and accessories like tree cap, back pressure valves etc.

c) Double studded adapter

flanges and secondary seals from 1-13/16"”to 26-3/4"”ID.

d) Choke and kill manifold

assembly e) Rotary drilling

equipment including :- i) Stablizers ii) Drill collors

As per API 6A specs. Upto 30 “ 7” – 30” 5” – 30” 1 – 13/16” to 7-1.16” ID 5” – 30” 1 – 13/16” to 7-1.16” ID For pressure from 2000 to 10000 PSI -do- As per API 6A specs. As per API 6A specs. As per API 6A & 6D specs.

M/s Ados Pakistan Ltd. Islamabad.

118

iii) Heavy weight drill pipe iv) Drill string subs v) Bit subs vi) Kelly saver subs

Made from 4140H forged steel or special steel, as per API 7 specs, Upto 36” OD 4 – ½” to 9-1/2” Upto 31 ft Upto 5.1/2”

57. 73.08 All types of structures for any service incl. Masts, towers, plate girders, columns, supports, staging, walkways, factory sheds, grid and yard structures, platforms, ducts chutes, draughts, chimneys, cyclones, etc for all types of industrial plants like cement, sugar fertilizer, chemical, petro-chemical, oil refineries & processing, etc.

Pakistan Engineering Co. Lahore Ittefaq Foundries Ltd lahore Karachi Shipyard & Engg. Works, Karachi Pakistan Steel Fabrication Ltd, Karachi Quality Steel Works Ltd, Karachi Heavy Mechanical complex , Taxila DESCON Engg. Ltd , Lahore M & J Engg. (Pvt) Ltd, Karachi.

58. 73.09 Reservoirs, tanks, vats and similar containers: e.g. M.E.G. road Tanker barrels, Oil Storage Tanks, Low Pressure Feed Water Heater/Deaerator and Feed Water Tank. Clarifier Tanks, etc. of capacity exceeding 300 litters

For any service and any type of steel; (other than compressed or liquefied gas at low temperature)

Karachi Shipyard & Engg. Works Karachi Ravi Engg. Ltd. KalashahKaku. Heavy Mechanical Complex, Taxila Descon Engg. Ltd. Lahore Design & Development Fabrication Lahore Central Engg. Ltd. lahore Mughal Star Ltd. lahore Haseeb Waqas Ltd. lahore M & J Engg. (Pvt) Ltd Karachi

59. 73.10 Tanks, casks, drums, cans, boxes and similar containers.

For any service & of any type of steel, whether or not lined or heat insulated but not fitted with mechanical

Pakistan engg. Co. Lahore Hashmi Can Co. Ltd.Karachi Design & Development Fabrication, Lahore

119

or thermal equipment(other than compressed or liquefied gas)

Descon Engg. Ltd. lahore Moghal Star Ind. Lahore Pak Tool Industry Ltd Lahore Central Engg. Ltd. Lahore Brother Engg. Ltd. lahore Haseeb Waqas Ltd. Lahore M & J engg. (Pvt)Ltd. Karachi

60. 73.11 a) LPG cylinders upto 45 kg . b) Bulk storage tanks c)Pressure Vessels (Cylinder upto 250 mm wall thickness and spherical upto 30 mm wall thickness)and column upto 100 mm plate thickness for liquids and gases for any service.

Fauji Metals Ltd, Rawalpindi Heavy Mechanical Complex, Taxila. Descon Engg. Ltd, Lahore Central Engg. (Pvt) Ltd, Lahore M & J Engg. (Pvt) Ltd, Karachi Cylinders Engg. Ltd, Karachi

61. 73.12 Stranded wire, ropes, cables, plated bands slings and the like, of steel not electrically insulated “excluding bearing API specification”

6 to 37.5 mm dia wire ropes wires of less than 6 mm dia

Chaudhry Wire Industries Ltd, Lahore Kaemari Docks Ltd, Karachi Metropolitan Steel Corp. Karachi

62. 73.15 Industrial chains of steel & parts thereof (Excluding “High Tensile & Alloy Steel Link chains, Toothless & with Teeth sprocket chains for conveyors”)

Roller Chain of ½” dia Link chain of MS of dia 20 mm

Awan Engg(Regd) G.Wala Pakistan Industrail Chain Ltd, Karachi

63. 73.18 Screws, bolts, nuts coach screws, screw hooks, rivets, cotters, cotter pins, washers(including spring washers) & similar articles of iron or steel

All kinds as per BS,DIN and JIS specifications except High tensile items

Adamjee Engg(Pvt) Ltd, Karachi Ciros Industries(Pvt)Ltd,Lahore Teepu Industries Ltd, F.abad B & H (Pvt) Ltd, Lahore

120

64. 73.20 Spring and leaves for spring of iron or steel

Of AISI 4340,8629,5040 and any other heat treatable grade)

Akbar Autos(Pvt) ltd, Karachi Ashraf Engg. Works, Lahore Allwin Engg. Industries Ltd, Karachi Suleman engg. Ltd. Lahore National Automotive Ltd, Lahore People Steel Mills Ltd, Karachi

65. 7325.9100 Grinding balls and similar articles for mills.

i)Cast G/Media of high Cr cast iron of dia 22-100 mm, ii)Forged G/Media of dia 30-120 mm , iii) High Chrome Grinding Media

Rastgar and Co. (Pvt) Ltd. Islamabad. Heavy Mechnical Complex, Taxila Karachi Shipyard & Engg. Works, Karachi Chenab Engg & Forgings, Faisalabad Steel Castings Ltd, G.Wala Peoples Steel Mills Ltd, Karachi

66. 74.07 Copper rod Conforming to ASTM B-49/78-83 specifications

Bawany Metals Ltd, Karachi Newage Cables Ltd, Lahore Simpson Wire Ltd, Karachi Pakistan Cables ltd, Karachi Manzoor Nabi Industries, Ltd, Allied Industries(Hub) Ltd, H.M. Ismail & Co. Karachi Shama Cables Ltd, Lahore

67. 76.04

Aluminium Angles, Shapes & Sections

Aluminium Processing Industries Ltd, Karachi Atlas cables(Pvt) Ltd, Karachi Chaudhry Cables(Pvt) Ltd, Lahore Newage Cables(Pvt) Ltd,

121

Lahore Pakistan Cables ltd, Karachi Bawany Metals Ltd, Karachi Alcop Ltd, Lahore Transpak Ltd, Lahore Punjab Metal Ltd, Lahore Sana Aluminium Peshawar.

68. 76.06

i) Aluminium plates

ii) Aluminium Strips

03-50 mm thickness upto 3.5’ width.

Pakistan Metal Industries, Karachi Anwar Metal Industries, G.Wala Atlas Cables(Pvt) Ltd, Karachi Chaudhry Cables (Pvt) Ltd, Lahore Newage Cable(Pvt) Ltd, Lahore Pakistan Cables Ltd, Karachi Bawany Metals Ltd, Karachi Punjab Metal Wsorks Ltd, Lahore, Alcop Ltd. Lahore.

122

69. 76.14 78.01 7803.0000 8311.3000 84.02

Stranded wires/cables of Aluminium for machinery transmission and distribution lines. Solder-ingots of Lead Solder Bars, rods, profiles of Lead. Flux Cored Solder wires. i) All types of Water tube boilers upto 350 T/hr & 80 Kg/Cm2

pressure; ii) Packaged type, fire tube boilers upto 25 T/hr steam & pressure upto 24 Kg/Cm2 , iii) Waste heat Recovery Boilers 150 T/hr capacity & pressure upto 24 Kg/cm2 iv) Heat Recovery Steam generators upto 200 Mwe Single unit, or multiple thereof. v) Parts and components of above boilers. (Details of locally manufactured boiler equipment are given in the Annexrure-I)

Excel Industries, Karachi. Tejani Metal Industries, Karachi. Invert Industries, Lahore. Gem Solders, Karachi.

-do-

-do-

-do- Karachi Shipyard & Engg. Works, Karachi Ittefaq Brothers(Pvt) Ltd, Lahore Heavy Mechnical Complex, Taxila Greshman Easter Co. Karachi DESCOn Engg. Ltd Lahore Haseeb Waqas Engg. Ltd. Lahore M & J Engg. (Pvt) Ltd, Karachi.

70. 84.03 Central Heading Boilers. -do-

71. 84.04 or other respective headings.

i) Thermal Power Plants,Coal Fired, Conventional & Combined Cycle Types (List of locally manufactured plant

Thermal Power Plant of Module upto 360 MW

-do-

-do-

123

equipment as specified in the Annexure-I). ii) Condensers & heat exchangers for above plant iii) Parts of auxiliary Plant e.g steel structure chimney, ducts, heating coils, headedrs, tubular air pre heater, tanks, vessels, drum with wall thickness upto 120 mm

72. 84.08

Compression-ignition internal combustion Piston engines(diesel or semi-diesel engines) of following types; i) Slow, medium , high speed horizontal diesel engine upto 100 HP capacity ii) 4 and 6 cylinder diesel engines, for trucks & buses , upto 164 HP. iii) Diesel engines for tractors of upto 65-70 HP

Bela Engineers Ltd, Lasbella, Baluchistan Chiragh & Sons, Lahore Pakistan Engg. Co. Ltd. Lahore Millat Tractors Ltd, lahore

73. 84.10

Hydraulic turbines and water wheels for hydel power plant of rating upto 10,000 KW and parts therefore including regulators (complete list of locally manaufactured Hydel Power, Plant equipment is enclosed at Annexusr-II) Radial gates Draft tube gates Fixed wheel Bulk head gates Penstock Draft tube

Heavy Mechnical Complex, Taxila KSB Pumps Co. Hasanabdal Awan Engineering G.wala Ittefaq Foundries ltd, Lahore Nawab Tubewell Service, Lahore Pakistan Engg. Co. Ltd. Lahore Machine Craft (Pvt) Ltd. Lahore Pakistan Engg. Co. Lahore Descon Engg. Ltd.Lahore Karachi Shipyard & engg.

124

Tail race lining Spiral/involute casing for francis turbines Head & bottom coves for shafts for turbine runners Turbine runner upto 1 MW (upto 65 ton weight) Trash racks Sill beam Stop logs Embedded parts and oit liners Wicket gates Gate valves

Works, Karachi.

74. 84.13 i) Single delivery, electrically operated, mechnicals pumps for dispensing petrol & diesel for filling stations with delivery rate of 50-70 Lit/min ii)Centrifugal Pumps of following types and sizes;

Nominal Max Max. Capacity heads Size upto (M3/Hr) (Mtrs) mm dia

i)Pakistan Machine Tools Factory, Karachi ii)Pak Elektron Limited iii)Machine Craft (Pvt) Ltd, Lahore iv) KSB Pumps, Lahore. v) HMA Stainless Steel Pumps Ltd. Karachi. vi) Pakistan Engineering Co. Lahore.

a) Deepwell vertical turbine pumps , line shaft type delectrical/diesel engine drive

300 1020 200

b)Deepwell vertical turbine pumps submersible type electrical drive

200 410 300

c) Horizontal centrifugal pumps cast iron/Stainless Steel construction.Also available in Copper alloy

300 1840 91

d)Horizontal centrifugal 100 37

125

pumps for refineries, oil & gas sector.Cast Iron & cast steel construction according to any international standards

51

e)High Pressure horizontal single/multistage centrifugal pumps

100 173 600

f)Horizontal non-clogging centrifugal pumps in cast iron, stainles steel and copper Alloy construction

300 1940 120

g)Vertical non-clogging centrifugal pumps wet pit/dry pit installation

350 2000 60

h)Non-clogging submersible motor pumps with pit installation.

100 184 18

ij)High capacity llow lift tubular casing axial flow propeller pumps

750 7140 12

k) Auxiliary split volute casing pumps

350 3200 50

l) Submersible pumping sets

Pumps directly coupled with submersible motors for well sizes : 150, 200 & 300 mm & motor rating 15 to 150 HP

m) Mobile pumping sets

Pumps of different sizes, coupled with high speed diesel engines and mopunted on a trolley with steel wheels

n) Pumping sets(centrifugal, single

PEC_ Pedestal type pumps with no diriving

126

and multi stage) arrangement PCB-Pump coupled with a pulley (dia 200 mm) for belt drive ii)PCF-pump coupled with electronic motor mounted on a rigid base PEC- mono-block pumps, driven with an electric motor PCO-pump coupled with high speed diesel engines.

iii) Stainless steel pumps of following types:

Capacity Head (M3/Hr) (Meters)

a) Stainless steel 304/316 deepwell turbine pump line shaft type with electric motor diesel engine suitable for pumping water, aggressive liquids and sea water application.

b) Stainless steel

304/316 submersible pumping sets suitable for dewatering, irrigation aggressive liquids and sea water application.

c) Vertical in – line

multistage centrifugal pump in staianless steel 304/316 suitable for high pressure water boosting, chemicals industry, boiler feed application and

280 150 280 450 80 250 75

127

aggressive chemicals.

d) Single stage suction pump for water boosting applications.

10

75. 8414.5100 Following electric fans : Table fans Ceiling fans Pedestal fans Exhaust fans Bracket fans

Metalex Corp. (Pvt) Ltd. Karachi Wahid Industries (Pvt) Ltd, Gujrat Anwar Industries(Pvt) Ltd, G.Wala S.Mohammad Din & Sons, Lahore National Metal Works, Gujrat. Younis Metal Works, Gujrat. GFC Fans, Gujrat.

76. 8414.5900 Industrial fans (excluding rotary piston & screw type blowers)

upto 1.6 meter rotor diameter, Casings for even higher sizes of fans are produced

Heavy Mechnical Complex, Taxila.


a)Air Conditioners: Packaged tupe Split type b)Chillers: i)Air Cooled water chillers ii)Water cooled air chillers c)Air handling units d)Fan coil units e)Humidification plants f)Air filtration units g)Domestic air conditioners(window & split type)

02-60 HP 01-60 HP 4 tons to 200 tons capacity 4 tons to 200 tons capacity 1600 CPM to 65000 CPM 200 CPM to 1600 CPM 1 to 2 tons(12000, 18000 & 24000 BTU)

Habibullah Industries (Pvt)Ltd, Karachi S.A.Brothers(Pvt) Ltd, Islamabad. Pak Elektron Ltd. Lahore Climax Engg. Co. Ltd. G.Wala Greeves Air Conditioners ltd, Karachi United Refrigeration Industries Ltd, Karachi World Wide Refrigeration & Air Conditioning Corporation Ltd, Karachi Sabro Engg(Pvt) Ltd, Islamabad.

128

78. 84.17 a) Gas fired as well as electric furnaces & ovens for heating & melting and burning of metals and materials in laboratory

upto 1 ton capacity. Instruments Manufacturing Co.Ltd. Karachi Rimtaj Industries(Pvt) Ltd, Lahore Shirazi Brothers,Karachi Shujauddin & Brothers, Karachi Descon engg Ltd. Lahore

b)Kiln for cement industries/Rotary Dryers

All sizes Heavy Mechnical complex, Taxila Descon Engg. Ltd. lahore

c)Arc Furnace Upto 5 tons capacity i) Transpak(Pvt) Ltd,Lahore

d) Induction Furnace Upto 5 tons (line frequency)

ii) Transpak(Pvt) Ltd, Lahore


Following refrigeration/ freezing/air conditioning machines; Refrigeratos Deep freezers Bottle coolers Refrigerated vans Cold storage Condensers/heat exchangers for compression type units Cooling towers excl. those of fiber glass body Car Airconditioner Ice Cream making Plant. Milk Chilling Units For Ice Bank system and Direct Expansion System Tank Capacities Upto 2500 liters.

Pak Elektron Ltd, Lahore S.A. Brothers(Pvt) ltd, Islamabad. Habibullah Industries(Pvt) Ltd, Karachi Philips Electrical Industries, Karachi Cool Industries Ltd, Lahore Domestic Appliance Ltd, Karachi Indus Enterprises(Pvt) Ltd, Karachi Sanpak Engg. Industries(Pvt) Ltd, Lahore Waves Industries (Pvt) Ltd, Lahore. Unitech International Private Ltd, Lahore.

129

80. 84.19 & other respective headings.

Following plant, machinery and equipment for Sugar, Fertilizer, Chemical, Petro-Chemical, oil and gas projects & Refinery; a) Cascade and

barometric type evaporation units , crystallizer, condenser for sugar remelter, sulphitator, dryer,coolers, air heaters, grates and combination grates ;

b) Pressure vessels Cylindirical upto 250 mm & spherical upto 30 mm plate thickness

c) Columns (stripper, absorption, distillation, dehydration,

d) Reactors e) Tanks,mixers,

agitator tanks f) Economizers g) Bulk storage tanks h) Deaeration

equipment & de-gassifiers

i) Furnaces/fired heater j) Cyclone scrubbers &

dust collectors k) Rotary equiupment

e.g. dryers,coolers, granulators, drum den, calcinator & rotary kilns

l) Finishing machines m) Vaccum condensers n) Crystallizer o) Evaoprators/steam chests ii) Heat Exchange Units, Shell & Tube Type

(The detailed list of locally manufactured equipment is enclosed as Annexure-III) As per TEMA standards.

Heavy Mechnical Complex, Taxila Karachi Shipyard & Engg. Works,Karachi Ittefaq Foundries Lahore Idrees Engg. Works Ltd, g.Wala Star Mughal Industries, Ltd.G.Wala Descon Engg. Ltd. Lahore Fabricon(Pvt) Ltd, Karachi M & J engg. (Pvt) Ltd, Karachi.

- do -

130

b) Chromium Sulphate Plants c) Sulphuric Acid Plant d) Fertilizer Plant

iii) Heat Exchange Units Shell & Tube Type

As per TEMA standards

-do-

81. 84.21 Following filteration & purifying plants :- i) Water softening plants of unlimited capacity single train or multiples thereof ii) De-mineralization plant upto 100 m3 iii) Waste water treatment plants for textile & tannery. iv) Water filtration plants upto 100 MGD capacity v) Reverse osmosis water treatment plant upto 100 litre/hr single train or multiples thereof to unlimited capacity

ARS International Ltd, lahore Fabricon (Pvt)Ltd,Karachi Sun Engg. Works,Karachi Heavy Mechnical complex,Taxila DESCOn Engg. Ltd, Lahore Pak tool Industry Ltd, Lahore Two Star Industries Ltd, lahoire M & J Engg. (Pvt) Ltd, Karachi M/s.Aquatech, Karachi.

82. 8423.8900 Weighing machinery & weigh-bridges

Upto 200 tons capacity Ittefaq Foundtries ltd,Lahore Karachi Shipyard & Engg. Works,Karachi Heavy Mechnical Complex,Taxila

83. 84.24

Fire extinguisher of water, foam, AFFF, dry powder and holotron types

10-150 liter capacity “portable and wheeled models”.

Anwar Industries Ltd, G.Wala Husein Habib corp. Ltd.Lahore Ghazi Industries, Multan Ittefaq Industries,F.abad Heavy Mechjnical Complex, Taxila


Following handling and lifting machinery :- i) Screw Jacks for

Karachi Shipyard Engg. & Works Ltd Karachi Heavy Mechnical Complex, Taxila

131

locomotives only. ii) Hydraualic Jacks, iii) Hoists iv) Mobile Cranes (Also rough terrain type) v) Overhead travelling cranes vi) Jib Cranes vii) Mono-rail cranes viii) Gantry and semi-gantry cranes ix) Portal/Dock side cranes x) Hand Pallet Trucks. x) Service station hoist/lift

Lifting capacity 10/20 tons (Also rough terrain type) Upto 500 Tons lifting capacity and of any span Pillar or wall mounted type upto 5 tons lifting capacity and 5 meters of reach Upto 10 tons lifting capacity with electric or manual hoists Upto 300 tons capacity Upto 25 tons lifting capacity Capacity 200 kg max. fork span 520 mm. Fork length 1070 mm, fork width 1550 mm, fork height lower 85 mm, higher 205 mm.

Ittefaq Foundries(Pvt)Ltd, lahore Rimtaj Industries(Pvt)Ltd, Lahore Pakistan Engg. Co. Lahore Asian Technology Lahore Descon Engg. Ltd.lahore M & J Engg. (Pvt) Ltd, Karachi

85. 84.27 Forklift Truck Upto 5 tons lifting capacity

Heavy mechnical Complex,Taxila Millat Tractors, Ltd, Lahore

86. 84.28 i) All types of belt conveyors/belt elevators, apron feeders, screw conveyors. ii) Passenger lifts iii) Pneumatic conveying equipment’s such as FK pumps Fluxobin pumps/air lifts/air slides.

Schindler Fatehally & Merin Ltd, Karachi Jeewajee(Pvt) Limited, Rawalpindi Heavy Mechnical complext,Taxila M & J Engg. (Pvt) Ltd, Karachi

132

87. 84.29 i)Levellers

ii)Static road rollers 10/12 tons 3 wheel, power steering, 55 HP 1500 rpm, max liner compression 80 Kg iii) Vibratory road rollers capacity (tons) 8,10,12 Power (HP) 86, 133 Engine rpm 2300,2200 iv)Hydraulic shovel Capacity 7-19 m , 100/120 HP v) Sheep foot roller

Heavy Mechnical complex, Taxila Ittrfaq Foundries, Lahore Farm Development Industries, Lahore

88. 84.32 Cultivators, Chaff cutter, Blades, Ploughs, Disc Harrows, Seed Drills, Reapers, Riggers and Ditchers

These items are being manufactured in the country according to the user’s statisfaction. However, following are some units engaged in the manaufacture of Agriculture Implements: Faisal Farm Industries, Bahawalpur Sagro-Engg. Industries, Ltd, Kotri Supreme engg. Works Ltd, lahore Ittefaq foundtries Ltd, Lahore Javaid Engg. Company, Gujranwala Sayyed Machinery Ltd, Kasur Millat Tractors Ltd, Lahore.

89. 84.33 Combine harvesters – threshers for wheat, rice & maize

1000-1500 lbs per hour capacity

Ittefaq Foundtries Ltd, lahore Sayyed Machinery Ltd, Kasur Ittefaq Industries, F.abad Millat Tractors Ltd.

90. 84.38 and other

Citric Acid Plant, Sugar Plant, Tea Plant, Oxalic

Machinery for sugar plants of 500 to 12000

Karachi Shipyard & Engg. Works, Karachi

133

respective headings

Plant and Alcohol Plant (Complete list of sugar plant and equipment manufactured locally is being placed at Annexure-IV)

tons of cane crushing per day, based on sulpho defection, double sulphitation, defection, remelt processes (Carbonation/Sulphitation)

Heavy Mechnical Complex, Taxila Ittefaq Foundtries Ltd, Lahore Star Mughal Industries ltd, G.wala United Techno Corp. Lahore A.R.S.International Ltd. lahore National Engg. Works, G.wala M & J engg.(Pvt) Ltd,Karachi

91. 84.39 Conventional type machinery for making, finishing paper and paper board.

All types except writing/printing machinery

M.A. Din & sons lahore Allied Engg. Co. G.wala Descon Engg. Ltd. Lahore

92. 84.43 Printing machinery and machines for uses ancillary to printing Trade printing machine Paper cutting & die cutting creasing machine Letter press(trade) printing machine Proof press Perforating machine

8”,10”,12”,15” 13”, 22” 18”

Alwis(Pvt) Ltd, Lahore Evergreen Industries,Lahore Lion Industries,Lahore.

93. 84.45 i) High draft conversion or pulley driver conversion system. ii) Sectional Warping Machines and Cone Creels. iii) Cone Winding Machines. iv) Pirn Winding Machines

80” to 160” width. 12 spindles to 50 spindles.

-do-

Talib Brothers Engineering Ltd. Faisalabad.

134

94. 84.46

Automatic Cop-change terry Towel Looms. Automatic Cop-change Grey Cloth Looms. Rapier Terry Towel Looms. Rapier Grey Cloth looms. Plain Terry Towel Looms. Plain Cotton Looms

Size: 56″ to 110″ Reed Space Size: 56″ to 120″ Reed Space Size: 56″ to 130″ Reed Space Size: 56″ to 130″ Reed Space Size: 56″ to 110″ Reed Space Size: 56″ to 120″ Reed Space

M/s Talib Brothers Engg. Works, Faisalabad. Pakistan Engg. Company, Lahore. Allied Engg. Company. Master Engg. Works (Pvt) Ltd. Gujranwala. Alam Brothers Industries, Gujranwala. Abid Industries, Karachi. F.W. Fabrications, Lahore. Textile Machinery (Pvt) Ltd.

95. 84.48 Dobbies Spindles Shuttles Reeds

Light and heavy duty, Cotton Towel and Silk weaving

M/s Talib Brothers Engg. Workds, Faisalabad. Pakistan Engg. Co. Lahore Allied Engg. Co. G.wala Master Engg. Works Ltd. Faisalabad. Alam Brothers Industries, Gujranwala. Abid Industries, Karachi. F.W. Fabrication, Lahore. Textile Machinery(Pvt) Ltd, Karachi. Pakistan machine tool Factory, Karachi.

96. 84.50 Household or lanudry washing machines,also those with drying system

Singer pakistan Ltd, Karachi Diwa Industries(Pvt) Ltd, Karachi Five Star Household Appliances Ltd, Karachi

97. 84.52 Sewing machines of household type

i) Salika Sewing Machine Co. Ltd. Karachi ii) Singer (Pak) Ltd, Karachi

98. 84.53 Following machinery for tanning and making footwear:

i) Setting out 1600 mm, 1800 mm Pakistan Tanning Engg.

135

machine(excluding offal setting machine) ii) Leather shaving machine with or without dust collector, hydraulic models iii) Leather buffing machine (with or without dust collector) with hydro pneumatic system. iv) Wooden drums for liming v) Shearing machines vi) Hydraulic presses excluding rotary iron presses. vii) Bend knife plating machine viii) Dusting and brushing machine ix) Flashing machines

and 2100 mm 1800 mm 1800 mm 300 mm to 800 mm 1500 mm 1500 mm Mechanical type

Works, Lahore Shalimar Machinery Works Ltd, lahore Imdad Tanning Works,Lahore Iqbal Machine Tool Industries, Lahore.

99. 84.55 Metal-Rolling Mills and Rolls thereof

Upto 5 tons/hr cross country type rolling mills sizes upto 250 mm

Ittefaq foundries Ltd, lahore Khurram Steel Casting Ltd, Peshawar Ittefaq engg. Works,F.abad Mark Copr. Ltd, Karachi Karachi Shipyard & Engg. Works,Karachi Heavy Mechnical Complex, Taxila

100. 84.58 i) Precision centre lathes with taper hydraulic copy/ turning attachment ii) General purpose lathes with capstan

With centre distance upto 1500 mm & centre height upto 185 mm. With centre distance upto 1830 mm and centre height upto 165

Chenab Engg. Works & Foundry ,Fabad Pakistan machine Tool Factory Karachi Pakistan Engg. Co. Ltd. lahore M.Ismail Engg. Works,

136

equipment. iii) Precision lathes semi automatic iv) Heavy duty centre lathes v) Accessories for centre lathes with centre distance upto 3500 mm and centre height upto 350 mm

mm With centre distance upto 610 mm and centre height upto 115 mm Bar feed capacity 40 mm,chuck work capacity 228 mm

Lahore Wah Industries ltd, Wah Bright Engg.(Pvt) Ltd. Lahore vii) Madina engg. Ltd. lahore

101. 84.59 i) Drilling machines ii) Knee type milling machines

With drilling capacity upto 62 mm in cast iron & 50 mm in steel Horizontal vertical or universal versions with longitudinal traversers upto 810 mm & table size upto 1300 x 300 mm.

Pakistan Machine Tool Factory, Karachi

(iii) Vertical copy Milling and Boring Machine

Drilling capacity in steel upto 25 mm, table size upto 1050 x 225 mm & longitudinal transverse upto 489 mm

-do-

(iv) Universal engraving machine

With clamping area 500 x 200 mm with pantograph ratio from 1:1 to 1:50

-do-

(v)Vertical liquid lead lapping machine vi) Accessories for milling machines (Like universal head, vertical head, dividing head

Table size 1065 mm x 255 mm.Long Travel 750 mm Vertical Travel 400 mm Cross Travel 300 mm. No. of spindles=5, Working Stroker(travel_=1500

-do-

-do-

137

slotting head, rotary table, machine vice, Arbors, sleeves, collect holders, etc)

mm, Oil Pump Pressure=20-50 Kg/cm2

102. 84.60 Pedestal grinding machines, bench,type, excluding numerically controlled machines.

50 cycles per second, rpm over 3000

Chenab engg. Works & Foundry F.abad Pakistan machine Tool Factory,Karachi Pakistan Engg. Co. Lahore M.Ismail Engg. Works, Lahore

103. 84.61 and other respective headings.

Shaping or slotting machines and sewing or cutting machines”excluding the numerically controlled machines”.

Raw Stroke upto 700 mm

Chenab Engg. Works & Foundry Fabad. Pakistan machine Tool Factory, karachi Pakistan Engg. Co. Lahore M.Ismail engg. Works Lahore

104. 84.62 i) High speed hacksaw machines for cutting forging or die stamping machines (including presses & hammers) “excluding the numerically controlled machines”

For diameter not exceeding 180 mm or blades of length 45 cm maximum pressure (single action upto 65 tons)

Chenab Engg. Works & Foundry Fabad. Pakistan machine Tool Factory, karachi Pakistan Engg. Co. Lahore M.Ismail engg. Works Lahore

ii) Bending, folding, straightening or flattening machines(inclduing preses)”excluding the numerically controlled machines” Mechnical power presses.

Upto 500 tons -do-

iii) Shearing machines including presses, other than combined punching and shearing machines “excluding numerically controlled machines”.

For plates of thickness upto 8 mm

-do-

iv) Hydraulic presses Upto 80 ton capacity -do-

138

excluding the “numerically controlled machines”.

105. 84.65 i) Hacksaw machines Blade length 10-400 mm

Abid Industries(Pvt) Ltd. Karachi

ii) Milling machine, horizontal vertical and universal machine “excluding the numerically controlled machines”

Pakistan machine Tool Factory, Karachi

106. 84.65. Manual typewriters i)Telephone Industries of Pak. Haripur ii)Carrier Telephone Industries, Islamabad


A- Cement plants for grey cement (details of locally manufactured machinery & equipment is enclosed as Annexure-V

Dry & wet process cement plants upto 5500 tons per day (TPD)

Karachi Shipyard & Engg. Works Karachi Heavy Mechnical Complex, Taxila Ittefaq Foundries Ltd, Lahore Awan engg. Co. G,wala Descon Engg. Ltd. Lahore Akram Engg. Ltd, Islamabad.

B- White cement plants. 50-250 TPD -do-

C- Impact Hammer Crushers

Upto 4000 Tons/hour -do-

D- Finish Ball Mills Ball Mill having a diameter upto 4.5 meter and Length 12 meter

-do-

E- Asphalt Mixing Plants

Stationary : Mixi capacity 40-150 tons/hr. Mobile Units: Mixi capacity 30-80 tons/hr

-do-

F- Oil & Gas Processing Plant

See Annexure-VI for specifications

Heavy Mechnical Complex, Taxila

G- Sulphur Recovery Excluding Burners & -do-

139

Plant Instruments based on Foreign Design

H-Basic Chromium Sulphate Plant

See Annexure –VII for specifications

-do-

J-Concrete Mixers Heavy duty Reversing Batch drum Type model Capacity unmixed (Litres) 285 Capacity mixed(litres) 200

K-Stone crushing and screening plant

Upto 300 tons/hr Karachi Shipyard & Engg. Works,Karachi Heavy Mechnical Complex, Taxila Ittefaq Foundries Ltd, Lahore Awan Engg. Co. G.wala Descon Engg. Ltd. Lahore Akram Engg. Ltd.Lahore and a number of another manufacturers in un-organized sector.

108. 84.79 i) Wire Drawing machine

Drawing capacity 0.1 mm to 10 mm

Mobin engineering Works,Karachi

ii) Oil expellers and oil seed crushers

109. 84.81 i) Sluice valves ii) Plug lubricating valves iii) Non-return valves iv) Butterfly valves of stainless steel

Upto 6” size Upto 6” size Conforming BS 30 16 1983 Upto 1” x 1” for all capacities.

-do-

AKHTAR Industries, G.wala Anwar Industries,G.wala Popular Pipe Fiting & Manufacturing Co.Lahore General Valve(Pvt) Lahore Ultra Engg. Ind. Ltd,Karachi. Pakistan Engg. Co.Ltd.Lahore

140

v) Gas Pressure Regulators

Pak Engg. Works.Lahore Alpine Inds. Ltd.Lahore Mushtaq Ltd.Lahore Ghulam Mohyudding & co .Ltd Lahore.

110. 84.83 i) Transmission Shafts (including Cam Shafts & Crank Shafts) and Cranks. ii) Gears and transmission components. Engine Valves (intake & exhaust), valve guides for use in vehicles including tractors. iii) Complete gear box and rear axle for Bedford trucks, model CJ 2BZO and Bus NJM. iv) Transmission shafts and gears for Fiat and Massey Ferguson tractors upto 50-85 HP capacity.

Pakistan Machine Tool Factory, Karachi.

111. 8484.1000 8485.9010

Gaskets Oil seals

For atmospheric and low pressure applications(upto 5 kg/cm2)

Agriautos Industries Ltd, karachi S.H.Industries(Pvt)Ltd, Karachi Longman Mills , Lahore

112. 85.01 i) Electric induction(Squirrel cage) motors excluding submersible, slip ring motors & flame proof motors, ii) Submersible pump motors 380/440V, 3-phase with ratings of 15-110 HP iii) AC fan motor

220-400 volts, 50 c/s single phase and 3 phase, 0.5 to 500 HP.

Siemens(Pak) Engg. Karachi Climax Engg Co..Ltd, G.wala Pak Elektron Ltd, lahore Pakistan Engg. Co. Ltd, Lahore

141

iv) Vertical hollow shaft motors.

113. 8501.6100 v) Low voltage synchronous alternators (All types)

Single phase, Out put rating from 1 KVA to 150 KVA and voltage upto 380 V.

Siemens Pakistan engg. Co. Ltd.

114. 8501.6300 Low voltage synchronous alternators (All types)

3-Phase, output rating from 5 KVA to 750 KVA, and voltage upto 380 volts

-do-

115. 85.02 Diesel generating sets excluding gas operated generating sets.

Of an output ranging from 25 KVA to 1000 KVA

Siemens Pakistan Engg. Karachi Pak Elektron Ltd, Lahore Millat Tractors Ltd, lahore.

116. 85.03 Parts suitable for use with above motors, alternatives and generators.

117. 85.04. i) Liquid dielectric transformers with power handing capacity : 5-40 Mva and voltages 132/66/11 KV “excluding instrument and current transoformers” ii) Power transformers (Instrument & current Transformers) iii) Uninterrupted Power Supply (UPS)

Rated use at nominal system voltage upto 3.3 KV to 12.5 KV and current rating upto 200A Voltage upto & including 33000 V and having a KV rating not exceeding 5000, including special type transformers from 5-40 MVA. Power rating from 300-1500 VA

Climax Engg. Co. Ltd. G.wala Siemens Pakistan Engg. Karachi Johnson & Philips, Karachi Faizi Industries Ltd, G.wala Pak Elektron Ltd, lahore Trans pak Elector Industries, Ltd, Lahore Heavy Electrical Complex, Kot Najibulah BOL, Ltd, Lahore

iv) Ballast/Choke for translucent & discharge lamps excluding electronic ballast for energy saving lamp.

Philips Elect. Industries of (Pak) Ltd, Karachi Shafaq Lamps Corp. Lahore Hye Sons Karachi

142

v) Rectifiers

(a) Cathodic Protection rectifiers (Thyristor controlled) upto 1000A DC) (b) Electro plating rectifiers (Thyristor controlled ) upto 2000A DC) (c) Polarization Rectifiers (thyristor controlled) upto 2000 Amp.DC) (d) Battery chargers upto 400 Amp.

Single phase (24V upto 110V,DC) Three phase (24V upto 200V,DC)

Descon Engineering (Pvt) Ltd.,Lahore

118. 85.06

Dry Battery Cells of leakproof quality

1.5 volts, Kohinoor Battery Manufacturing Ltd, Karachi Indus Battery Industry,SITE,Karachi Premier Battery Karachi National Battery Karachi Mercantile Industrties, SITE,karachi Meghna Industries, Ltd, Ravi Road, lahore

119. 85.07 Electric accumulators/storage batteries

Voltage not exceeding 24 V and rating upto 55 Amp/hour

Atlas Batteries Ltd, SITE,Karachi Exide Pakistan Ltd, SITE, Karachi Automotive Battery Co. Ltd. Karachi

120. 8509.1000 Vaccum Cleaners Household type Singer Pakistan Ltd, Karachi

121. 85.14 i) Line frequency induction furnace ii) Electric Arc furnaces for steel melting iii) Electric furnace iv)Salt bath furnaces

upto 5 tons charge upto 5 ton capacity upto 40 KW and 4 tons/charge capacity upto 150 liters of molten salt.

143

122. 85.15 Following welding

machines & apparatus: i) Welding rectifiers ii)Welding Transformers iii)Argon/Tig Welding machine with high frequency units

Upto 600 Amps. Upto 350 Amps Upto 400 Amps

Climax Engg. Ltd. G.Wala Descon Engg. Ltd, Lahore Faizi Industries Ltd, G.Wala Transpak Elector Industry Ltd, Lahore Heavy Electrical Complex, Haripur Climan Engg. Co. G.wala Pak Elektron Ltd, Lahore M & J Engg. (Pvt) Ltd, Karachi

123. 85.16 Electric, instantaneous water heaters, Space heating radiators, Electric smoothing irons, Ovens, cookers, cooking plates, boiling rings, grillers and roasters. Electric toasters.

Household type Olympia Electric & Plastic Industries, Lahore Philips Elect. (Pak ) Ltd, Karachi

124. 85.17 i) Telephone sets ii)Teleprinters

All types All types

Telephone Industries of Pak. Haripur.

125. 8517.3000 iii) Digital switching equipment for all types of exchanges capable of providing following functions :-

TIP, Haripur Alcatel Pakistan Ltd., Islamabad.

Voice switching Voice network Data Switching Data Network Mobile Traffic Switching Mobile Network Intelligent Networks

Connectivity of up to 200,000 subscribers on one exchange. Connectivity of upto 60,000 ports/circuits on one exchange. Upto l1000 subscribers

144

on one subscriber rack. iv) Private

Switching/private automatic branch exchange(PABX)

Max Trunks: 12 Max Extension: 300

v) Automatic Call Distribution System

Computerized directory assistance system with automatic call distribution and data-base for directories of inquiry services.

CTI, Islamabad.

126. 8517.5010 Public switching/Digital Exchange(Public)

Can be installed: Local Exchange Tandem exchange Transit Exchange International Gateway Container Shells for Digital Exchanges

TIP, Haripur Alcatel Pakistan Ltd, Islamabad.

127. 8517.8020 Synchronous Digital Hierarchy Multiple system. Access Multiplexer System(AMS)

High capacity digital multiplexer having 2 Mh/s to 622 Mh/s stream to provide synchronous digital hierarchy PCM(Pulse Code Modulation) base in to 120 channel digital multiplexer with copper, radio and optical fibre terminal equipment for transmission.

CTI, Islamabad.

iii) Fiber Optical Terminal Equipment

Optical line terminal equipment to interface with digital transmission equipment having CCITT standard configuration of 2 kh to 622 kh.

CTI, Islamabad.

Card operated telephone sets for use with wire and wireless telephone Lines, Type:

145

Indoor Payphone conforms to specifications and recommendations set by Pakistan Telecommunication Co. Ltd., for Payphones to be installed in Pakistan. Display: 128x64 bit (PT1000) 24x2 Character (PT 1100) Card Type: All ISO series 7816 Smart cards Metering 16 KHz, Polarity Options: Reversal, Internal Tariff Table. Signalling: DTMF, Pulse and 12 KHz LPU Pulse Outputs NMS: Supported. Power Line powered. Options: (External Source Optional) CO Line: 24V or 48V, 2x200R Feed resistance Internal 1200 baud V.23

146

Modem: (2400 baud optional)

128. 8517.1910 Line Protection unit Anti telephone-taping device for protecting payphones from unauthorized use Conforms to specifications and recommendations set by Pakistan Telecommunication Co. Ltd., for Line Protection Units to be installed in Pakistan. Receiver : 12 KHz+/- 180 Hz, > 5 mV 16 KHz rejection 5 > Loop Detection: > 5mA for > 100 m Sec Line Voltage < 1.5 V Drop : Input voltage: 40.60 VCD. Input Power: 1.5 W max. Coding Pattern: User selectable.

Concept (Pvt.) Ltd., Islamabad

129. 8517.3000 Pair Gain System Provides multiple telephone connections on a single telephone cable pair. Typoe: Digital Multiline System. Conforms to

-do-

147

specifications and recommendations set by Pakistan Telecommunications Co. Ltd., for Pair Gain Systems to be installed in Pakistan. Phones per pair: 4 or 8 Range : Upto 8 Km Line Interface: 2B1Q, 2B+D format on Balance Line Pair. Channeling 32 Kbit/s or 16 Coding : Kbit/s ADPCM. Subscriber: 24V Interface on PCM A- Law 64 Kbit/s. Subs. Signaling: DTMF, Pulse, 16 Khz/12 JGz Metering Option. Exchange Side: 40 to 66 V lines, 2 x 200 R Feeding Voltage. Line Feed: +/- 90 VDC. Input Power: 44 to 70 V CD, 90 W max.

148

130. 85.23 i) Audio Cassettes

ii) Video Cassettees Amin, SITE, Karachi

Aviotronics ltd, Baluchistan CASPAK Ltd, SITE, Karachi Tawakul Plastic Industries, Karachi EMI(Pak) Ltd, SITE, Karachi Shalimar Recording Co. Ltd. Islamabad.

Perfect Engg. Works, Karachi Myfip Video Inds. Ltd, karachi Avitronics Ltd, Karachi Osaka Plastic Inds. Karachi

131. 85.25, 85.27 and other respective headings

i) Digital Radio System Point to point low capacity digital radio system for 30 to 480 voice/dte channels in multiples of 2Mb/s in frequency bands of 7,8,10,13,15,18,22,25 and 38 GHZ with a capacity of 2/2x2, 4x2, 8x2 and 16/2 M bits/s.

CTI,Islamabad.

ii) VHF radios Single/multiple channel VHF radio for point to point radio communications in the frequency band of 145-174 MGz.

CTI,Islamabad.

iii) Multiple Access Radio System(MARS-30)

A radio transmission equipment with digital multiplexer in the frequency band of 790-830 MHz for 30 60 voice/data channel to be extended from

CTI,Islamabad.

149

exchange.

132. 85.27 VHF PK/VRS-XX SERIEs VRS-78 (Low Power Vehicular) VRC-79 (High Power Vehicular) VRC-80(Low Power Tank/APC)

Portable FM Transceiver An/PRC-77 Designed and built to meet milspecs. Fully solid state and compatible Frequency band 30,00 to 75.95 MHZz.

VRC-81(High Power Tank/APC) VRC-81A(High Power Tank/APC) with interphonic amplifier for command.

50 MHz channels spacing Total 920 channels Sensitivity 10 DB at 0.5 V RF input Audio output 4 uWAT 1 K ohms Load RF output manpack 2.5 W nominal TankVEH 30 W nominal Operating temperature – 40oC to 65 o C.

VHF, VRC-4600 Series VRC-4620 (Manpack) VRC-4622 (Vehicular)

Portable FM transceiver RT-4600 Designed and built to meet mill-specs Compatible and modular design Frequency band 30 to 76 MHz. Channels spacing 50 MHz (25 MHz optional) Total channels 920 (1840 optional) Sensitivity 35 uV for 10 dB(sinad) Audio output 4 uWAT 1 K load RF output , Manpack

150

2.5 nominal) iii) Range Booster PP-

77/SP Designed and built to meet mil-specs Frequency band 30 to 76 MHz Channels Spacing 25/50/100 KHz RF output 5-50 W AF response 30 to 10 KHZ + 5 Db Antwnna output imedence 50 Ohms Radio (input impedence 50 Ohms Radio current consumption 50W Approx.8A 5W Approx. 3A Cooling by grilled housing.3

NRTC, Haripur

iv) Electronics field telephone EPT-101

Designed and built to meet Mil-specs Frequency range 300 to 400 Khz Impedence 600 Ohms Speech transmission 650 mV to 920 mV. Speech reception 20 mV to 24 mV Call frequency 18 MZ to hZ Call voltage 55 V to 58V Current consumption 7.5 ma to 10 mA. Acoustical warning 60 Db relative 2 x 10-6 Anti side tone 18 db to 32 dB Insulating resistance 1K ohms Battery voltage 4.5 V(3 x 1.5 cells).

NRTC, Haripur.

v) SNAP –ON Keypad Dialler Unit SKU-102

Designed and built to meet Mil-Specs. Frequency range 300 to 3400 KHz

NRTC, Haripur.

151

vi) The signalling device that converts LB field telephone, EFT-101 into A CB telephone with dialling facility

Impedence 300-1800 AT 1 KHz Ringing tone 1.2 KHz + 0.2 KHz(nominal) P/supply (LB) 4.5 VDC & (CB) 12-22 VDC. MRBD > 15000 hours Mart < 30 minutes Operating temperature.

vii) VHF single channel radio T/phone

FM, TWO way communication radio Designed for rural communication system Compatible and fully solid state Frequency range, 146 to 174 MHz Number RF channel 40 Channels spacing 25 KHz Sensitivity 0.5 uV for 20 dB S/N Spurious and image rejection > 80 dB. RF output 10 W(1.0 to 10W adjustable) Frequency stability +/-0 0005% Operating temperature – 10o c to 55 0 c

NRTC, Haripur.

viii) VHF 8 x 2 x 8 Dual Channel Radio T/phone

-Dual link radio link to serve 8 subscribers Desired for rural communication system Reliable and economical T/phone service Sensitivity 0.35 uV for 12 dB Sinad Spourious and image rejection > 90 dB RF output 10 W(1.0 to 10 W adjustable)

NRTC, Haripur.

152

Frequency stability +/-0 .00025% Operating temperature – 300C to +550 c

ix) Electronics field exchange , PFX-6416

Fully digital electronics field exchange Designed and built to meet mil-specs Multiprocessor architecture Pulse code modulation Non blocking speech path 96- lines(32 subcrs 48 magneto, 16 trunk) Expandable 192 lines Subcriber/magneto/trunk 2 wire 6000 hms Frequency response 300 to 3400 Hz. 10- PPS, 800 ms IDP 60/40 M/B ratio pulse. And CCITT recommended DTMF dialing Ring voltage 90 V.C. AC, 25Hz Power supply 220 V 50 HHz/24 VDC Operating temperature-300 c to + 60 0 c

NRTC, Haripur.

x)PABX, NRC- 02 PK 20 lines PABX(4 trunk + 16 subscribers) Fully electronic telephone system Microprocessor architechture Pulse code modulation Non-blocking speech path Subscriber/trunk line loop 1500 Ohms Frequency response 300 to 3400 Hz Pulse/CCITT recommended DTMF

NRTC, Haripur.

153

dialing Ring voltage 90 V AC, 25 Hz. Power supply 220 V 50 Hz/24 VDC

xi) VHF Mobile Radio/Base Radio/Repeater

FM synthesised two-way radio Comptable and meets Mil-specs Frequency band 146 to 174 MHz 12.5 KHz/25 KHz channel spacing Total 16 channels Sensitivity 0.30 uV/0.35 V 12 dB sinad Spurious and image rejection < 80 dB. RF output 25 to 45 W Frequency stability +/-0.00025% Operating ltemperature-200c to + 600C

NRTC, Haripur.

133. 8507.2090 i) Ni-CD battery charger Compact size Dual charging facility(PRC-77/RY-4600) Deep discharging facility 12/24 V automatic select Reverse polarity protection Automatic cut off at deep discharge point.

NRTC, Haripur.

ii) Ni-CD batteries for PRC-77

13.2 volts 4 AH Operating Temp : 52050 C + 2050 C Closing temp: 42.50 c or higher + 2.50 c to Min life cycle: 500 charging cycles when charged at C/2/800/mA/7 Hours charging rate

NRTC, Haripur.

154

134. 8504.5000 i) DC regulated power

supplies/rectifier Desired to be used as battery eliminator in telephone exchanges Equally reliable for all comm. Eqp. Charging facility Capable of constant and continuous output AC input 220 V 50 Hz Ripple voltage less than 100 Mv Regulation 2.5% Wide variety and range Input 220 V,output 24 v/10A Input 220 V,Output 24 V/10A Input 220 V,Output 45 V/10A Input 220 V, Output 45 V/20A Input 220 V, Output 45 V/30A Input 220 v, Output 45 V/60 A

ii)D.P.Boxes In pairs As per PTC standard specifications Tropicalised

NRTC, Haripur.

135. 85.28 Television receiver sets, colour, black & white or other monochrome.

14”, ,15”, 16”, 20”, 21’’, 25” , 29 “ & 34” screen

Philips Elect. Ind. Of pakistan, Karachi S.N.H. Ind. (Pvt) Ltd, Karachi Saif Nadeem Electro Ltd, Haripur Pacific Tradedrs(Pvt)Ltd, Karachi Mohammad ebrahim and Co. Ltd. Karachi PEL-DAEWOO Electronics Ltd, Hattar. New Allied Electronic Industries, Winder.

155

136. 85.29 Grid Parabolic Antenna Yagi antenna

High gain parabolic antennas with 10 dB gain in the frequency bands of 0.8 GHz, 1.5-2.7 GHz and 6 GHz. Five element simple Yagi antenna with 10 dB gain in the frequency band of 146-174 MHz.

CTI, Islamabad CTI, Islamabad NRTC,Haripur

137. 85.32 Electric capacitors excluding SF 6 gas filled of frequency 60 HZ & voltage upto 1000 volts

For electric appliances, excluding those of kind used in electronic equipment etc.

Khawaja Electronics(Pvt) Ltd, Lahore Amber Capacitors Ltd, Lahore Uni Tech Electronics(Pvt) Ltd, Lahore Sind Tech. Industries Ltd, Karachi Descon Engg. Ltd, Lahore

138. 8534.0000 Printed Circuit Boards Single & Double Sided TIP, Haripur NRTC,Haripur Micropack, Islamabad.

139. 85.35

HRC fuses distribution fuse boards Medium voltage Circuit breakers except SF6

From 20 to 800 Amperes Upto a nominal voltage of 11KV

Johnson & Philips (Pak) Ltd. Siemens Pak. Engg. Karachi AEG Pak Ltd, Karachi Pak Elektron Ltd, Lahore Descon Engg. Ltd. Lahore Faizi Industries Ltd, G.wala EAC Engg. Ltd, lahore

140. 85.36 Switches, plugs, lamp holder, relay sockets junction boxes, etc(of household type but excluding industrial types) except load break switches & unit switches. Miniature circuit breakers, single double and triple pole. 11KV Dropout fuse

Direct-on-line starter 10 HP NSD starter 15 HP , Motor control unit 25 HP, automatic starter of delta type of 50 HP. Upto 10 Amps/500 volts

Siemens (Pak)Ltd karachi AEG(Pak) Karachi Misto Industries (Pvt) Ltd, Lahore Johnson & Philips(Pak)Ltd, Faizi Industries, G.wala EAC Engg. (Pvt) Ltd, Lahore Also being produced in un-organized sector.

156

fittings for transmission lines.

141. 85.37 H.T.circuit breaker panels, load break switch panel, L.T. switchgear and lighting/power distribution boards, control signaling and relay panel for grid stations, rectifier panel upto 200 Amps. Motor control centres including programmable logic controllers and related instrumentation and control equipment for industrial plants such as cement, sugar, steel rolling, low voltage switchgear etc.

Siemens Pak. Engg. Ltd. Karachi Johnsons & Philips (Pak)Ltd, Karachi AEG pak(Pvt) Ltd, Karachi Pak Elektron (Pvt)Ltd, Lahore Pakistan Switchgears ltd, Lahaore General Products Industries ltd, Karachi Faizi Industries ltd, G.wala Climax Engg. Co. Ltd, G.wala Descon Engg.(Pvt) Ltd, lahore

142. 85.39 i) GLS lamps. Philips Elect Ind. of Pakistan Ltd, Karachi Panther Industries (Pvt) Lted, Karachi Shafaq Lamps Corp. Ltd. Khyber Elect Lamps Mfg. Ltd, Karachi Elahi Sons Ltd, Peshawar Punjab Lamp Works Ltd, lahore

ii) Flourescent Tubes. 2 feet and 4 feet sizes Philips Elect. Ind. Ltd, Karachi Corn(Pak)Ltd, Karachi Panther Industries (Pvt) ltd, Karachi National Electronics Ind. Karachi Continental Technology Inds. Lahore

143. 85.42 Hybrid Circuits Thick film hybrid circuits

TIP,Haripur.

157

144. 85.44 (A)Power Cables and conductors: i)PVC insulated power cables ii)PVC insulated armoured power cables for underground installation iii)Flexible copper wire and cable iv)PVC insulated cables v)Power cables insulated with cross linked polyethylene vi)ACSR conductors vii)AAC conductors

Upto 15,000 volts rating

Pakistan Cables Ltd, Karachi Pioneer Cables Ltd, Karachi Punjab Cables Ltd, Lahore Atlas Cables Ltd, Karachi Newage Cables Ltd, Lahore Choudhry Cables ltd, Lahore H.M.Cables, Karachi L.T.Engg. & Trade Services (Pvt) Ltd, Lub Thatto.

(B) Telephone Cables: All telephone cables i.e. telecommunication cables, indoor telephone cables, audio/radio frequency cables, junction cables, primary cables, secondary cables, jelly filled cables, drop wire, switch board & jumper cables, optic fiber ( C) Wiring harness

-do-

145. 85.46 Insulators of ceramic materials for use in transofrmers, busing and insulating supports for transformers & switchgear panels.

Upto 11 KV Emco Appliances(PVT) Ltd, Karachi.

146. 85.47 Electric conduit of steel and PVC whether or not reinforced tubes and pipe fittings “excluding lelectrical conduit of steel coated with PVC”.

75 mm to 200 mm

Being produced in un-organized sectors.

147. 86.07 Traction Pinion and Pakistan machine Tool

158

Gears of Locomotives Screw Coupling Railway Axles

Factory, Karachi Heavy Mechnical Comple, Taxila

Respective headings of Chapter 87

Refrigerated trucks and delivery vans

Kold Kraft (Pvt) Ltd, Lahore

148. 87.01 Tractors Upto 85 HP capacity Millat Tractors(Pvt) Ltd, lahore Al-Ghazi Tractor Ltd, D.G.Khan. Fector Balarus Tractors ltd, Lahore G.M. Tractors, Karachi. Allied Tractors, Karachi.

149. 87.02 87.03 and other respective headings.

Following vehicles:- i) Cars (Petrol/Diesel) upto 2000 cc. ii) Vans. iii) Jeeps. iv) Pick Ups. v) Trucks. vi) Busses.

Indus Motor Co. Ltd, Karachi Pak Suzuki Motor Co. Ltd, Karachi Gandhara Nissan Ltd. Karachi Honda Motor Co. Lahore Hino Pak (Pvt) Ltd, Karachi Sind Engg. Ltd, Karachi. Dewan Farooq Motors Ltd, Raja Motor Company, Ghandara Nissan Diesel Ltd. Adam Motor Co.

150. 87.06 Chassis for Trucks Both long & short members


151. 87.08 Following parts and accessories of motor vehicles of heading No. 87.01 to 87.05 :-

List of manufacturer is available with Deletion Minotiring Cell, Ministry of Industries & Production.

Rear view mirror, arm rest, instrument panel,


159

door handle, engine front grill, door trim, wheel trim, bracket condenser, tool box, steering wheel, fuse box cover, screen washer jar, brake fluid jar, bumper, piston, engine valves, (intake & exhaust) dies & mould for manufacturing plastic products.

Heavy Mechnical Complex, Taxila Millat Tractors, Lahore Ata Muhammad Enterprise. Lahore Power Pistons(Pvt) Ltd, Lahore. SPEL, Lahore. Agri Autos, Hub. Omer Jibran Ltd. Karachi.

152. 87.11 Motorcycles (including mopeds) & cycles fitted with an auxiliary motor, with or without side cars.

Upto 125 cc Suzuki Motorcycles Pak. Ltd. Karachi Novelty enteprrises Ltd, Mirpur(AK) Atlas Honda Ltd, karachi Dawood Yamaha Ltd, Karachi Pak Hero, Lahore. Pak Industrial Cycles, Ltd. Lahore. Fateh Motors Memon Associates, Hyderabad.

153. 87.12 Bicycles and other cycles (including delivery tricycles) not motorized.

With single & double bars size 22”, 24”, & 26”. Folding bicycles size 18” Sports bicycles size 20” BMX bicycles size 14”,15”

Pak Cycle Indust. Co-op Society Ltd, lahore Pakistan Engg. Co. Ltd. Lahore Lahore Cycle Inds. (Pvt) Ltd, Lahore.

154. 8714.9300 Aluminium pressure die-cast wheel parts, like hubs panels, flanges, drum, sprocket, break shoe of motorcycles

For all types of motorcycles


155. 87.16 Trailers & semi-Trailers for the transport of goods(skid mounted caravans)

35- 40 tons Fabricon Karachi Heavy Mechnical complex, Taxila Karachi Shipyard & Engg. Works, Karachi Pakistan Steel Fabricating Ltd, Karachi Ravi Engg. Ltd,

160

Shaikhpura Descon Engg. Ltd, Lahore M & j engg. (Pvt) Ltd, Karachi

156. 88.03 Air Dispensers(Drop Tanks)

Aluminium Tanks for Aircraft


157. 89.01 Ships, Boats & barges

Upto 26000 tons capacities.

Karachi Shipyard & Engg. Works Karachi


Optical fiber , Optical fiber cable

Fiber cut of wave length = 110 nm to 1320 nm Zero Despersian wave length = 1300 nm to 1322 nm Zero Despersian slope < = 0.092 PS/nm2 KW) Despersian at 1550 nm < = 18Ps/(nm KW) Mode feed dia meter 9-10 nm Numerical Aperture 0.11

L.T.Engg. & Trade Services(Pvt) Ltd. Lub Thatto Hasanabdal.


Following instruments and appliances used in medical surgical dental or veterinary operations :-

anaesthesia instruments excl. apparatus and anaesthesia in liquid or any other form Asepsis instruments Dressing instruments Forceps Homeostatic forceps Metal Instruments for operating upon

i)HICO Surgical Inds. Sialkot Falcon Surgical Co. Sialkot Friends Surgical Sialkot Glorm Mercantile Corporation Ltd, Sialkot Butt Brothers & co. Dodeyes Agencies Ltd. Interm’s Limited Hilbro(Pvt) Ltd, Sialkot.

Bladder, urology Dermatology Goiter Gynecology Instestines, rectum and stomach Kideny

161

Liver, gall baldder Mouth, Tongue Obstetrics Opththalmology, excluding diagnostic instruments and apparatus Otology Retractors Rhinology Thorax and lungs Tonsils Trichotomy

Esophagoscope linstruments Probes and applicators for:

Applying medicines on wounds For use during operation of gall baldder Lacryinal used for eye

Scalpels forged steel including E.P. Handle Scissors Sterilization equipment Vaccination & puncturing instruments.

160. 90.22 Electro medical equipment i.e. diagnostic X-Ray units

50 ma to 500 ma Siemnes Pak. Engg. Co.Ltd. Karachi

161. 9028.3010 KOH electric meters, expect maximum Demand Indicators(MDI) meters

Single phase and three phase 220 volts, 400 volts and 50 c/s

Syed Bhais Ltd, lahore Escorts pak. Ltd. Lahore PEL Ltd, Lahore

162. 9028.1000 i) Gas Meters (G 16) Max low rate(capacity) = 2.5 cubic meter, Min low rate (capacity) = 0.016 cubic meter, Max working pressure = 1 bar, temperature range = 20-60C

Sui Southern Co. Ltd. Karachi. Pak Tool Machine Factory, Karachi.

162

ii) Gas Meters (G-16) Max low rate(capacity)

= 6.0 cubic meter, Min low rate (capacity) = 1. cubic meter, Max working pressure = 1 bar, temperature range = 20-60C

163. 90.32 i) Geyser thermostat, oven thermostat, geyser safety valve, room heater thermocouple .

Tesla Industries Ltd., Islamabad.

ii) Electric water heater thermostat electric water heater element.

–do-

164. 93.01 Mortar Guns 60 mm size 120 mm size

Heavy Mechnical Complex, Taxila Pakistan Machine Tool Factory, Karachi

165. 93.03 i) Shotguns ii) Rifles iii) Pistol, automatic revolvers, sporting arms and air guns.

12 bore, single & double barrel 7 mm and 0.22 LR 0.32 and 0.25 Caliber

Ghulam Muhammad Dossul & Co. Karachi Universal Sporting Arms Co. Karachi Dawood Arms, Peshawar National Shot Gun Factory, Pindi Gheb A.M.Ibrahim Jee & Sons, SITE, Peshawar.

166. 95.06 Sports goods and articles of gymnastic etc.

Bilal Brother, Karachi Sunny Sports Equipment, Gujranwala . Also being produced in un-organized sector and cottage industry

167. 96.08 Ball point pens and fountain pens

Indus Pencil Ind. Karachi Shahsons(Pvt) Ltd, Karachi Syed Engg. Ltd, Lahore

168.

96.09 Pencils -do-

169. 96.17 Vaccum flasks and other vaccum vessels

Royal Glass Industries, karachi

163

Star Vaccum Bottle Mfg. Ltd, Karachi

NOTES: 1) The annexures to this list form the integral part of the revised CGO. 2) The above listed machinery/equipment/materials, etc. include their substitutes the

concessionary import of which would also not be allowed. 3) The above list would be regularly updated by EDB (proferably after every six

months) in the light of comments from local suppliers and users. 4) The HS/PCT No. used in column 2 of the above list are purely for reference

purpose.

LIST OF EQUIPMENT FOR COAL FIRED STEAM POWER PLANT. Key: Foreign= F Local = L A. TURBINE AND GENERATOR S.No. Description Design Scope of Local supplies -------- ------------------------------------------------- ----------- ------------------------------- 1. Steam Turbine & Generator F F 2. Turbine Hall Steel Structure L L 3. Turning Device F F 4. Auxiliary Oil Pump F F 5. Emergency Oil Pump F F 6. Main Oil Tank L L 7. Oil Cooler F F/L 8. Vapoor Extracter F F 9. Oil Purifier F F 10. Oil Storage Tank F L 11. Gland Steam Condenser F F/L B. COAL FIRING HANDLING & STORAGE EQUIPMENT. 1. Cool Bunker L L 2. Coal Feeder F L

164

3. Coal Pulverizer F L 4. Coal Burner F F 5. Coal Yard Supply Conveyor L L 6. Coal Bunker Supply Conveyer L L 7. Magnet Separator F F 8. Crusher F L C. ASH HANDLING EQUIPMENT 1. Clinker Hopper L L 2. Clinker Crusher F L 3. Jet Pulsion Pump F F 4. Ash Slucing Pump F F 5. Dewatering Bin L L 6. Coarse Ash Tank L L 7. Fly Ash Tank L L 8. Electroastatic precipiator. F F/L D. BOILER EQUIPMENT Conventional Steam Boiler F F/L 1 Boiler Fee Water Pumps F F 2 Boiler steel Structure F/L L 3 Drum F F 4 Down Comers F L 5 Membrane Wall F L 6 Exonomizer Coils F L 7 Super Heater Coils F L 8 Reheater Coils F L 9 Heaters F L 10 Air & Flue Gas Duets F L 11 Chimney F/L L 12 Soot Blowers F F 13 Steam Coil Air Preheater F L 14 Air Preheaten F F/L 15 Forced Draft Fan F F/L 16 Induced Draft Fan F F/L 17 Gas Recirculation Fan F F/L 18 Automatic Boiler Control System F F 19 Burner Control System F F 20 Relief & Safety valves F F 21 Dampers F L 22 Expansion joints F F 23 Steam bypass valves. F F E. MECHINCAL EQUIPMENT 1. Steam Condenser F F/L(Except tubeplates)

165

2. Circulating Water Pumps F L 3. Reversing Valve F F 4. Main Air Ejector F F 5. Starting Ejector F F 6. Condesnsate Pump F F 7. Bar screen F L 8. Rotary Screen F F 9. Intake Crane L L 10. High Pressure Feed Water Heater F F 11. Low Pressure Feed Water Heater F L 12. Deaerator & Feed Water Tank F L 13. Cooling Tower F F/L 14. Cooling Water pipes F/L L 15. Filling & Start up [ump L L 16. Intake Structure & Stop Gates L L 17. Water Supply Pumps L L 18. Spray Water Pumps L L 19. Mud Pumps L L 20. Clarifier TanK L L 21. Clarifier Water Pump L L 22. Clarifier Under Flow Pump L L 23. Clarifier Internal Scraper Mcechanism Walk Ways & Drive Material F F/L 24. Demin Water Treatment System F/L L 25. Demin Water Storage Tank L L 26. Demin Water Transfer Pump L L 27. Plant Water Gravel Filter System F L 28. Plant Drain Sump Pump L L 29. Boiler Blow Down Tank. L L. 30. Boiler Chemical Treatment System F F 31. Closed Loop Aux. Heat Exchanger F F. 32. Closed Loop Cooling Water Pumps L L 33. Closed Loop Cooling Water Head Tank L L 34. Cooling Water Coolers F F 35. Diesel Oil Storage Tanks L L 36. Diesel Oil Forwarding Skid Pumps F F/L 37. Chlorination Plant for Cooling Water F L 38. Neutralization Tank L L 39. Make-up Water Tank L L 40. Acid Storage Tank L L 41. Sampling equipment F F 42. Plant Fire Protection system L L 43. Fire Pump Package F F/L 44. Fire Water Storage Tank L L 45. Plant Piping F L 46. Control Valves F F 47. Overhead Cranes L L 48. Instrument & Service Air compressor F F 49. Auxiliary Boiler L L

166

50. Civil Works & Buildings L L 51. Insulation F L 52. Cladding F L 53. Paints L L F. ELECTRICAL EQUIPMENT 1. Generator Circuit Breaker F F 2. Main step-up STG Transformer F F 3. Unit Auxiliary Transofrmer L L 4. Station Service Transformer L L 5. Generator Isolated Phase Bus Ducts F F 6. 6.3 KV Switchgear L L 7. 6.3 KV Neutral Gounding Resistors F F 8. 400 V switchgear L L 9. LV Bus Duets L L 10. 400 V Motor Control Centres L L 11. Medium Voltage Motors F F 12. Low Voltage Motors L L 13. Stand by Diesel Generator Set L L 14. 125V DC System L L 15. Station Battery Charger L L 16. 220 V AC UPS Systen F F 17. Relay, Control & Metering Panels F/L L 18. Miscellaneous Control Panels F L 19. Local PLC Control System F L 20. Panel Boards F/L L 21. Lighting Material F/L L 22. Medium Voltage Cables L L 23. Low Voltage Cables. L L 24. Communication System F L 25. HV circuit Breakers F F 26. Disconnect Switches - Vertical Breaker F F 27. Disconnect Switches - Pentigraph F F 28. Voltage Transformers F/L L 29. HV CT s F L 30. Surge Arresters F L 31. Structures F L 32. Line Traps F F 33. Clock System F L 34. Instrumentation F L LIST OF EQUIPMENT FOR CONVENTIONAL STEAM POWER PLANT A. TURBINE AND GENERATOR

167

1. Steam Tubrine & Generator F F 2. Turbine Hall Steel Structure F L 3. Turning Device F F 4. Auxiliary Oil Pump F F 5. Emergency Oil Pump F F 6. Main Oil Tank F L 7. Oil Cooler F F 8. Vapour Extractor F F 9. Oil Purifier F F 10. Oil Storage Tank F L 11. Gland Steam Condenser F F B. BOILER EQUIPMENT Conventional Steam Boiler F F/L 1. Boiler Feed Water Pumps F F 2. Boiler Steel Structure F L 3. Drum F F 4. Down Comers F L 5. Membrane Wall F L 6. Economizer Coils F L 7. Super Heater Coils F L 8. Reheater Coils F L 9. Headets F L 10. Air & Flue Gas Ducts F L 11. Chimney F L 12. Soot Blowers F F 13. Steam Coil Air Preheater F L 14. Air Preheater F F/L 15. Forced Draft Fan F F/L 16. Induced Draft Fan F F/L 17. Gas Recirculation Fan F F/L 18. Automatic Boiler Control System F F 19. Burner Control Sustem F F 20. Relief & Safety Valves F F 21. Dampers F L 22. Expansioon Joints F F 23. Steam Bypass Valves F F C MECHANICAL EQUIPMENT 1. Steam Condenser F F/L 2. Circulating Water Pumps F L 3. Reversing Valve F F 4. Main Air Ejection F F 5. Starting Ejection F F 6. Condensate Pump F F 7. Bar Screen F L 8. Rotary Screen F F

168

9. Intake Crane L L 10. High Pressue Feed Water heater F F 11. Low Pressure Feed Water heater F L 12. Deactator & Feed Water Tank F L 13. Cooling Tower F F/L 14. Cooling Water Pipes F L 15. Filling & Start up Pump L L 16. Intake Structure & Stop Gates L L 17. Water Supply Pumps L L 18. Spray Water Pumps L L 19. Mud Pumps L L 20. Clarifier Tank L L 21. Clarifier Water Pumps L L 22. Clarifier Under Flow Pump L L 23. Clarifier Internal Scraper Mechanism F F/L Walk Ways & Drain Material 24. Demin Water Treatment System F L 25. Demin Water Storage Pump L L 26. Demin Water Transfer Pump L L 27. Plant Water Gravel Filter System F F 28. Plant Drain Sump Pump L L 29. Boiler Blow Down tank L L 30. Boiler Chemical Treatment System F F 31. Closed Loop Aux. Heat Exchanger F F 32. Closed Loop Cooling Water Pumps L L 33. Closed Loop Cooling Water Head Tank L L 34. Cooling Water Coolers. F F/L 35. Furance Oil Storage Tanks L L 36. Furnace Oil Un loading pumps. F F 37. Furnace Oil Suetion Heater F F/L 38. Furance Oil For Warding Skid F F 39. Diesel Oil Storage Tanks L L 40. Diesel oil For warding Skid Pumps F F 41. Chlorination Plant for Cooling Water F F/L 42. Neutralization Tank L L 43. Make-up Water Tank L L 44. Acid Storage Tank L L 45. Sampling Equipment F F 46. Plant Fire Protection System L L 47. Fire Pump Package F F/L 48. Fire Water Storage Tank L L 49. Plant Piping F L 50. Control Valves F F 51. Overhead Cranes L L 52. Instrument & Service Air Compressor F L 53. Auxiliary Boiler L L 54. Civil Works & Building L L 55. Insulation F L 56. Cladding F F

169

57. Paints. L L D. ELECTRICAL EQUIPMENT. 1. Generator Circuit Breaker F F 2. Main Step-up STG Transformer F F 3. Unit Auxiliary Transformers L L 4. Station Service Transformer L L 5. Generator Isolated Phase Bus Duets F F 6. 6.3 KV Switchgear L L 7. 6.3 KV Neutral Grounding Resistor F F 8. 400 V Switchgear L L 9. LV Bus Duets L L 10. 400 V Motor Control Centres L L 11. Medium Voltage Motors F F 12. Low Voltage Motors L L 13. Stand by Diesel Generatior set L L 14. 125 V DC System F F/L 15. Station Battery Charger F F/L 16. 220 V AC UPS System F F 17. Relay, Control & Metering Panels F/L L 18. Miscellaneous Control Panels F F/L 19. Local PLC Control System F F/L 20. Panel Boards F/L L 21. Lighting Material F/L L 22. Medium Voltage Cables L L 23. Low Voltage Cables L L 24. Communication System F L 25. HV Circuit Breakers L F 26. Disconnect Switches - Vertical Breaker L F 27. Disconnect Switchers Pentigraph L F 28. Voltage Transofermers F F 29. HV CTs F F 30. Surge Arresters F F 31. Structures F F 32. Line Traps L L 33. Clock System L L 34. Instrumentation L F LIST OF EQUIP[MENT FOR COMBINED CYCLE POWER PLANT A. TURBINE AND GENERATOR 1. Combustion Turbine and Generator F F 2. Steam Turbine and Generator F F 3. Turbine Hall Steel Structure F L 4. Diesel Oil Forwarding Skid Pumps F F 5. Fuel Selection Skid F F

170

6. Vanadium Inhibition Skid F F 7. Furnace Oil Treatment System F F 8. Furnace Oil Forwading Skid F F B. HEAT RECOVERY STEAM GENERATOR. 1. Headers F L 2. Economizer F L 3. Evaporator F L 4. Super Heater F L 5. HP/LP Drums F L 6. Steel Structure F L 7. Casing F L 8. Bypass Stack F L 9. Exhaust Stack F L 10. Deaetator and Feed Water Tank F L 11. HP/LP Drums Safety Valves F F 12. Boiler Feed Water Pumps F F 13. HP/LP Recirculation Pumps F F 14. HP/LP Piping F L 15. Soot Blower System F F C. MECHNICAL EQUIPMENT 1. Air & Flue Gas Duets F L 2. Dampers(Boiler Inlet & Bypass) F L 3. Butterlly Valves F F 4. Check Valves F F 5. Ball Valves F F 6. Globe Valves F F 7. Gate Valves F F 8. Plant Piping L L 9. Blow Down Tank F L 10. Demin Water Treatment System F F/L 11. Boiler Chemical Treatment System F F 12. Steam Condenser F F/L 13. Condensate Pumps F L 14. Vaccum Pumps F F 15. Cooling Water Pipes F L 16. Gland Steam Condenser F L 17. Cold Condensate Tanks F F 18. Condensate Booster Pumps F F 19. Intake Structure Screen & Bush Rads F F/L 20. Clarifier Tank Internatal Scraper Mechanism F F/L Walkways and Drive Materials. 21. Fuel Gas Dry Serubbers. L L 22. Fire Pump Package L F/L 23. Intake Water Chemical Dersing System F F/L 24. Chlorination Plant For Cooling Water System F F/L

171

25. Chlorination Plant For Fresh Water System F F/L 26. Instrument & Service Air Compressor L F/L 27. Closed Loop Aux. Heat Exchnagers F F 28. Diesel Oil Unload Pumps F F/L 29. Furance Oil Unload Pumps F F 30. Furnace Oil Storage Tanks L L 31. Furance Oil suction heater F F 32. Plant Water Grave Filter System F F 33. Circulating water System Bypass Filters F F 34. Intake Structure Stopgates L L 35. Water Supply Pumps L L 36. Spray Water Pumps L L 37. Mud Pumps L L 38. Wash Water Pumps L L 39. Well Water Pumps L L 40. Clarified Water Pumps L L 41. Clarified Water Pumps L L 42. Clarified Underflow pumps L L 43. Demin Water Storage Tank L L 44. Demin Water Transfer Pumps. L L 45. Cooling Tower F F/L 46. Cooling Water Circulation Pumps L L 47. Filing & Star Up pump L L 48. Acid Storage Tank L L 49. Caustic Storage Tank L L 50. Plant Drain Sump Pump L L 51. Oily Water Separators F L 52. Plant Fire Protection System L L 53. Fuel Gas sctubber Drain Tank F L 54. Auxiliary Boiler L L 55. Closed Loop Cooling Water Pumps L L 56. Closed Cooling Water Head Tank L L 57. Diesel Oil Storage Tank L L 58. Servage Septie Tanks L L 59. Sewage Leach Field L L 60. HRSG Leach Field F F 61. CHG Wash Water Drain Tank F F 62. Fire Water Storage Tank L L 63. Flow Down Basin Pumps ` L L 64. Collection Pit Transled Pumps L L 65. Gas Turbine Drains Tank L L 66. Distributed Control System F F 67. Stream and water Sampling System for HRCSG F F 68. Control Valves F f 69. Gas Detection System F F 70. Civil Works and Building L L 71. Bridge Cranes/Hoists F F 72. Insulation F L 73. Gladding F L

172

74. Paints F L D. ELECTRICAL EAUIPMENT 1. Generator Circuit Breaker F F 2. Main Step-up CTG Transformer F F 3. Main Step-up STG Transformer F F 4. Unit Auxiliary Transformer L L 5. Station Service Transformer L L 6. Gas Turbine Generator Isolated Phase Bus ducts F F 7. 6.3 KV Switchgears L L 8. Steam Turbine Generate Isolated Phase Bus Ducts F F LIST OF LOCALLY PRODUCED EQUIPMENT AND COMPONENTS COMBINED CYCEL POWER PLANT 1. Turbine and Generator 1.1 Turbine Hall Steel Structure. 2. HEATE RECOVERY STEAM GENERATOR 2.1 Heaters 2.2 Economizer 2.3 Exaporator 2.4 Super Heater 2.5 HP/LP .Drums 2.6 Steel Structure. 2.7 Casing 2.8 Bypass Stack 2.9 Exhaust Stack 2.10 Deaerator and Feed Water Tank 2.11 HP/LP Piping. 3. MECHANICAL EQUIPMENT 3.1 Air & Flue Gas Ducts. 3.2 Dampers(Boiler Inlet & Bypass) 3.3 Plant Piping, 3.4 Blow Down Tank 3.5 Demin Water Treatment System 3.6 Steam Condenser. 3.7 Cooling Water Pipes. 3.8 Gland Steam Condenser. 3.9 Cold Condensate Tanks. 3.10 Intake Structure Screens & Trash Racks. 3.11. Clarifier Tank Internal Scraper Mechanism Walkways and Drive Material 3.12 Fire Pump Package 3.13 Intake Water Chemical Dosing System.

173

3.14 Chlorination Plant for Cooling Water System. 3.15 Chlorinational Plant for Fresh Water System 3.16 Instrument & Service Air Compresson. 3.17 Closed Loop Aux. Heat Exchanger. 3.18 Furance Oil Storage Tanks. 3.19 Furnace Oil Suction Heater. 3.20 Intake Structure Stopgates. 3.21 Water Sullpy Pumps. 3.22 Spray Water Pumps. 3.23 Mud Pumps. 3.24 Wash Water Pumps. 3.25 Well Water PUmps. 3.26 Clarifier Tank 3.27 Clarified Water Pumps. 3.28 Clarifier Under flow Pumps. 3.29 Demin Water Storage Tank. 3.30 Demin Water Transfer Pumps. 3.31 Cooling Tower. 3.32 Cooling Water Circulation Pumps. 3.33 Filling & Stalt-up Pump. 3.34 Acid Storage Tank. 3.35. Caustic Storage Tank. 3.36 Plant Drain Sump Pumps. 3.37 Oily Water Separators. 3.38 Plant Fire Protection System 3.39 Fuel Gas Scrubber Drain Tank. 3.40. Auxiliar Boiler. 3.41 Closed Loop Cooling Water Pumps. 3.42 Closed Cooling Water Head Tank. 3.43 Diesel Oil Storage Tanks. 3.44 Sewage Septie Tanks. 3.45 Sewage Leach Field(s) 3.46 HRSG wash Water System. 3.47 CTG Wash Water Drain Tank. 3.48 Fire Water Storage Tank. 3.49 Blowdown Basin Pumps. 3.50 Collection Pit Transfer Pumps. 3.51 Gas Turbine Drains Tank 3.52 Civil Works and Building. 3.53. Bridge Crans/Hoists. 3.54. Insulation 3.55 Cladding 3.56 Paints. 4. ELECTRICAL EQUIPMENT. 4.1 Unit Auxiliary Transformer 4.2 Station Service Transofrmer 4.3 6.3 KV Switchgears

174

4.4 400 V Switchgears 4.5 LV Bus Ducts. 4.6 400 V Motor Control Centres. 4.7 Low Voltage Motors 4.8 Stand by Diesel Generator Set. 4.9 125V DC System. 4.10 Station Battery Charger. 4.11 Relay, Control & Metering Panels. 4.12 Miscellaneous Control Panels. 4.13 Local PLC Control System. 4.14 Panel Boards. 4.15 Lighting Material 4.16 Medium Voltage Cables. 4.17 Low Voltage Cables 4.18 Commuincation System. 4.19 Structures. 4.20 Clock System. 9. 6.3 KV Neutral Grounding Resistor F F 10. 400 V Switchgears L L 11. LV Bus Ducts L L 12. 400 V Motor Control Centres. L L 13. Medium Voltage Motors. F F 14. Low Voltage Motors. L L 15. Standy by Diesel Generator Set L L 16. 125 V DC System. F F 17. Station Battery Charger F F/L 18. 220 V AC UPS System F F 19. Relay Control & Metering Panels F/L L 20. Miscellaneous Control Panels. F F/L 21. Local PLC Control System F F/L 22. Panel Boards F F 23. Lighting material F/L F 24. Medium Voltage Cables. F/L L 25. Low Voltage Cables L L 26. Communication System L L 27. HV Circuit Breakers F F 28. Disconnect Switches-Vertical Breakers F F 29. Disconnect Switches-Pentigraph F F 30. Voltage Transformers F F 31. HV CPs F D 32. Surge Arresters F F 33. Structures L L 34. Line Traps F F 35. Clock System F L 36. Instrumentation F F LIST OF LOCALLY PRODUCED EQUIPMENT AND COMPONENTS FOR HYDRO ELECTRIC POWER STATION

175

A. CIVIL WORKS 1. Embeded Parts 2. Penstocks B. TURBINES AND AUXILIARIES 1. Wicket Gates 2. Spiral Casing 3. Draft Tube 4. Embeded Parts 5. Pit Liner C. GENERATOR AND AUXILIARIES 1. Embeded parts. D. TRANSFORMERS AND REACTORS 1. Current and Voltage Transformers 2. Preduction Equipment. 3. Auxiliary Transformers(Upto 40 MVA). E. CRANES. 1. Bridge Cranes 1.1 185/20 Tons 1.2 550/60 Tons 1.3 70/10 tons 1.4 6/2 tons 2. Gantry Cranes 2.1 75/10 tons 2.2 60/10 Tons 2.3 100/10 Tons 3. Miscellaneous Equipment F. HV SWITCHGEAR, CONTROL & PROTECTION EQUIPMENT. G. MV AND LV SWITCHGEAR H. DIESEL GENERATING STANDBY SETS I GATE EAUIPMENT 1. Barrage Radial Crest Gates 2. Barrage Undersluices Radial Gates.

176

3. Head Regulator Radial Gates 4. Tail Regulator Radial Gates. 5. Power Intake Fixed Wheel Gates 6. Bulk Head Gates 7. Draft Tube Gates 8. Flap Gate Assembly 9. Power House Transformer Deek Bulk Head Gate. 10. Stoplogs 11. Trash Rack 12. Lifting Beam 13. Sill Cleaning Device J. SWITCHYARD STEEL STRUCTURES K. CABLES AND ACCESSORIES 1. 11KV Power Cables 2. 100 V Power Cables L CONTROL & INSTRUMENTATION, SCADA AND TELECOMMUNICATION EQUIPMENT. M. TRANSMISSION LINE (500 KV) N MISCELLANEOUS AUXILIARIES ELECTRICAL 1. Low Voltage Motors 2. 125 V DC System 3. Station Battery Charger 4. Relay, Control & Metering Panels. 5. Miscellaneous ControlPanels. 6. Local PLC ControlSystem 7. Panel Boards 8. Lighting Material 9. Disconnect Switches 10. Surge Arrestors 11. Clock System Mechincal 1. Fire Protection System 2. HVAC Complete System. 3. Pumps 4. Piping 5. Paint.

177

LIST OF LOCLALY PRODUCED EQUIPMENT AND COMPONENTS FOR COAL FIRED STEAM POWER PLANT A. TURBINE AND GENERATOR 1. Turbine Hall Steel Structure 2. Main Oil Tank 3. Oil Cooler 4. Oil Storage Tank 5. Gland Steam Condenser. B. COAL FIRING ,HANDLING & STORAGE EQUIPMENT 1. Coal Bunker 2. Coal Feeder 3. Coal Pulverizer 4. Coal Yard Supply Conveyor 5. Coal Bunker Supply Conveyor 6. Crusher C. ASH HANDLING EQUIPMENT 1. Clinker Hopper 2. Clinker Crusher 3. Dewatering Bin 4. Coarse Ash Tank 5. Fly Ash Tank 6. Electrostatic Precipitator. D. BOILER EQUIPMENT - Conventional Steam Boiler. 1. Boiler Steel Structure 2. Down Comers 3. Membrane Wall 4. Economizer Coils 5. Super Heater Coils 6. Reheater Coils 7. Heaters 8. Air & Flue Gas Ducts. 9. Chimney 10. Steam Coil Air Preheater 11. Air Preheater 12. Foreed Draft Fan 13. Induced Draft Fan

178

14. Gas Fecirculation Fan. 15. Dampers. E. MECHANICAL EQUIPMENT 1. Steam Condenser 2. Circulating Water Pumps. 3. Bar Screen 4. Intake Crane 5. Low Pressure Feed Water Heater 6. Deaerator & Feed Water Tank. 7. Cooling Tower 8. Cooling Water Pipes. 9. Filling & Start up Pump. 10. Intake Structures & Stop Gates. 11. Water Supply pumps. 12. Spray Water Pumps. 13. Mud Pumps 14. Clarifier Tank. 15. Clarifier Water Pumps. 16. Clarifier Under Flow Pump. 17. Clarifier Internal Scraper Mechanism Walk Ways & Drive Material 18. Demin Water Storage System. 19. Demin Water Storage Tank 20. Demin Water Transfer Pump 21. Plant Water Gravel Filter System 22. Plant Drain Sump Pump 23. Boiler Blow Down Tank 24. Closed Loop Cooling Water Pumps. 25. Closed Loop Cooling Water Head Tank 26. Cooling Water Coolers. 27. Diesel Oil Storage Tanks 28. Chlorination Plant for Cooling Water. 29. Neutralization Tank. 30. Make-up Water Tank. 31. Acid Storage Tank 32. Plant Fire Protection System. 33. Fire Pump Package. 34. Fire Water Storage Tank. 35. Plant Piping. 36. Overhead Cranes 37. Auxiliary Boiler 38. Civil Works & Buildings 39. Insulation 40. Cladding 41. Paints.

179

F. ELECTRICAL EQUIPMENT 1. Unit Auxiliary Transformers 2. Station Service Transformer 3. 6.3 KV Switchgear 4. 400 V Switchgears 5. LV Bus Ducts 6. 400 V Motor Control Centres. 7. Low Voltage Motors 8. Stand by Diesel Generator Set 9 125 V DC system. 10. Station Battery Charger 11. Relay, Control & Metering Panels. 12. Miscellaneous Control Panels. 13. Local PLC Control System. 14. Panel Boards. 15. Lighting Material 16. Medium Voltage Cables. 17. Low Voltage Cables 18. Communication System 19. Voltage Transformers 20. HV CT's 21. Surge Arrestors. 22. Structures. 23. Clock System 24. Instrumentation LIST OF LOCALLY PRODUCED EQUIPMENT AND COMPONENTS CONVENTIONAL STEAM POWER PLANT. 1. TURBINE AND GENERATOR 1.1 Turbine Hall Steel Structure. 1.2 Main Oil Tank 1.3 Oil Storage Tank 2. BOILER EQUIPMENT Conventional Steam Boiler. 2.1 Boiler Steel Structure. 2.2 Drum 2.3 Down Comers 2.4 Membrane Wall 2.5 Economizer Coils 2.6 Super Heater Coils 2.7 Reheater Coils

180

2.8 Heaters 2.9 Air & Flue Gas Ducts. 2.10 Chimney 2.11 Steam Coil Aur Preheater 2.12 Air Preheater 2.13 Foreed Draft Fan 2.14 Induced Draft Fan 2.15 Gas Recirculation Fan 2.16 Dampers. 3. MECHNICAL EQUIPMENT 3.1 Steam Condenser 3.2 Circulating Water Pumps. 3.3 Bar Screen 3.4 Intake Crane 3.5 Low Pressure Feed Water Heater 3.6 Deaerator & Feed Water Tank 3.7 Cooling Tower. 3.8 Cooling Water Pipes 3.9 Filling & Start up Pump 3.10 Intake Structure & Stop Gates 3.11 Water Supply Pumps. 3.12 Spray Water Pumps. 3.13 Mud Pumps 3.14 Clarifier Tank 3.15 Clarifier Water Pumps. 3.16 Clarifier Under Flow Pump 3.17 Clarifier Internal Scraper Mechanism, Walk Ways & Drive Material 3.18 Demin Water Treatment System 3.19 Demin Water Stroage Tank 3.20 Demin Water Transfer Pump 3.21 Plant Drain Sump Tank 3.22 Boiler Blow Down Tank 3.23 Closed Loop Cooling Water Pumps. 3.24 Closed Loop Cooling Water Head Tank 3.25 Cooling Water Coolers. 3.26 Furnace Oil Storage Tanks 3.27 Furnace Oil Suction Heaters 3.28 Diesel Oil Storage Tanks 3.29 Chlorination Plant for Cooling Water. 3.30 Neutralization Tank 3.31 Make-up Water Tank 3.32 Acid Storage Tank 3.33 Plant Fire Protection System 3.34 Fire Pump Package 3.35 Fire Water Storage Tank 3.36 Plant Piping 3.37 Over Head Cranes

181

3.38 Auxiliary Boiler 3.39 Civil Works & Buildings 3.40 Insulation 3.41 Paints 3.42 Cladding 4. ELECTRICAL EQUIPMENT 4.1 Unit Auxiliary Transformers 4.2 Station Service Transformer 4.3 6.3 KV Switchgear 4.4 400 V Switchgear 4.5 LV Bus Ducts 4.6 400 V Motor Control Centres. 4.7 Low Voltage Motors. 4.8 Stand by Diesel Generator set 4.9 125 V DC system 4.10 Station Battery Charger 4.11 Relay, Control & Metering Panels 4.12 Miscellaneous Control Panels 4.13 Local PLC Control System 4.14 Panel Boards 4.15 Lighting Material 4.16 Medium Voltage Cables 4.17 Low Voltage Cables 4.18 Communication System 4.19 Structures 4.20 Clock System LIST OF EQUIPMENT FOR HX 300 MW HYDRO ELECTRIC POWER STATION Key: Foreign = F Local = L S.NO. Description Design Source of supply ___________________________________________________________________________ A. CIVIL WORKS 1. Embeded Parts F L 2. Penstocks F L B TURBINES AND AUXILIARIES

182

1. Runner F L 2. Shaft F F 3. Wickergates F F/L 4. Spiral Casing F L 5. Draft Tube F F/L 6. Butterfly Valve F F 7. Lubricating & Cooling System F F 8. Embeded parts F L 9. Pit Liner F L 10. Governor F F C. GENERATOR AND AUXILIARIES 1. Rotor F F 2. Stator F F 3. Embeded Parts F L 4. Main, Shaft & Compling Extension shaft F F 5. Bearinga F F 6. Lubricating Oil System F F 7. Generator Housing F F 8. Generator Protection F F 9 Generator Circuit Breaker F F D TRANSFORMERS AND REACTORS 1. Main Unit Step-up Transformer F F 2. Current & Voltage Transofrmers F L 3. Portection Equipment F L 4. Reactors F F 5. Auxiliary Transformers(Upto 40 MVA) L L E. CRANES 1. Bridge Cranes 1.1 185/20 Tons F/L F/L 1.2 550/60 Tons F/L F/L 1.3 70/10 Tons L F/L 1.4 6/2 Tons L F/L 2.Gantry Cranes 2.1 75/10 Tons F/L F/L 2.2 60/10 Tons F/L F/L 2.3 100/10 Tons F/L F/L 3. Mobile Crane 3.1 100 Tons F F 4. Truck Trailer 50 Tons F F 5. Trash Rack Cleaner F F

183

6. Misc. Equipments L L F. HV SWITCHGEAR, CONTROL & PROTECTION EQUIPMENT G. MV AND LV SWITCHGEAR F/L L H. ELEVATORS F L I DIESEL GENERATING STANDBY SETS L L J GATE EQUIPMENT 1. Barrage Radial Crest Gates F/L F/L 2. Barrage Undersluices Radial Gates F/L F/L 3. Head Regulator Radial Gates F/L F/L 4. Tail Regulator Radial Gates F/L F/L 5. Power Intake Fixed Wheel Gates F/L F/L 6. Bulk Head Gates F/L F/l 7. Draft Tube Gates F/L F/L 8. Flap Gate Assembly L L 9. Power House Transformer Deek Bulk F/L F/L Head Gate 10. Stoplogs L L 11. Trash Rack L L 12. Lifting Beam L L 13. Sill Cleaning Device L L K. GENERATOR ISLOATED PHASE BUS DUCTS F F L. SWITCH YARD STEEL STRUCTURES F F M POWER HOUSE TAKE-OFF MASTS F F N CABLES AND ACCESSORIES 1. 11 KV Power Cables L L 2. 400 V Power Cables L L 3. Multi-Core Control Cables F F 4. Multi-Core Communication Cables. F F 5. Coaxial High Frequencies Cables. F F O CONTROL & INSTRUMENTATION, SCADA AND TELECOMMUNICATION EQUIPMENT F L P TRANSMISSION LINE (500 KV) F F/L

184

Q MISCELLANEOUS AUXILIARIES F F/L Electrical 1. Generator Circuit Breaker F F 2. Medium Voltage Motors F F 3. Low Voltage Motors L L 4. 125 V DC System F F/L 5. Station Battery Charger L L 6. 220 V AC UPS System F F 7. Relay, Control & Metering Panels F/L L 8. Miscellaneous Control Panels F L 9. Local PLC Control System F L 10. Panel Boards F/L L 11. Lighting Material F/L L 12. HV Circuit Breakers F F 13. Disconnect Switches F L 14. Surge Arresters F L 15. Line Traps F F 16. Clock System F L Mechnical 1. Fire Protection System L L 2. HV AC Complete System F L 3. Air Compressor F/L F/L 4. Pumps F F 5. Valves F L 6. Piping F L 7. Paint L L LIST OF LOCALLY PRODUCED EQUIPMENT AND COMPONENTS FOR HYDRO ELECTRIC POWER STATION A. CICL WORKS 1. Embeded Parts 2. Penstocks B. TURBINES AND AUXILIARIES 1. Wicket Gates

185

2. Spiral Casing 3. Draft Tube 4. Embeded parts 5. Pit Liner C. GENERATOR AND AUXILIARIES 1. Embeded Parts D. TRANSFORMERS AND REACTORS. 1. Current and Voltage Transformers 2. Protection Equipment 3. Auxiliary Transfromers(Upto 40 MVA) E. CRANES 1. Bridge Cranes 1.1 185/20 Tons 1.2 550/60 Tons 1.3 70/10 Tons 1.4 6/2 Tons 2. Gantry Cranes 2.1 75/10 Tons 2.2 60/10 Tons 2.3 100/10 Tons 3. Miscellaneous Equipment F. HV SWITCHGEAR, CONTROL & PROTECTION EQUIPMENT. G. MV AND LV SWITCHGEAR H. DIESEL GENERATING STANDBY SETS I GATE EQUIPMENT 1. Barrage Radial Crest Gates 2. Barrage Undersluices Radial Gates

186

3. head Regulator Radial Gates 4. Tail Regulator Radial Gates 5. Power Intake Fixed Wheel Gates 6. Bulk Head Gates 7. Draft Tube Gates 8. Flap Gate Assembly 9. Power House Transformer Deek Bulk Head Gate 10. Stoplogs 11. Trash Rack 12. Lifting Beam 13. Sill Cleaning Device J SWITCH YARD STEEL STRUCTURES. K CABLES AND ACCESSORIES 1. 11 KV Pwer Cables 2. 400 V Power Cables L CONTROL & INSTRUMENTATION, SCADA AND TELECOMMUNICATION EQUIPMENT. M. TRANSMISSION LINE(500 KV) N MISCELLANEOUS AUXILIARIES Electrical 1. Low Voltage Motors 2. 125 V DC System 3. Station Battery Charger 4. Relay, Control & Metering Panels 5. Miscellaneous Control Panels 6. Local PLC Control System. 7. Panel Boards. 8. Lighting Material 9. Disconnect Switches 10. Surge Arrestors 11. Clock System Mechnical 1. Fire Protection System 2. HVAC Complete System 3. Pumps

187

4. Piping 5. Paint SUBJECT: LIST OF LOCALLY MANUFACTURED MACHINERY FOR OIL REFERENCE EDB MEETING HELD AT SIALAMABD ON 12.1.1998. We, the undersigned, appreciate EDB efforts for arranging the above meeting in order to finalize a list of items for oil reference which can be manufactured by local industry. After detailed discussion , it had been agreed by us that items specified in the list can be manufactured within our existing facilities according to international quality standard. __________________________________ ______________________________ Petrosin Ravi Industries Ltd, Lahore Descon Engg. (Pvt) Ltd. Lahore ________________________________ ______________________________ Heavy Mechincal Complex Taxila HMC Taxila __________________________________ ______________________________ Ittefaq Foundries (Pvt0 Ltd, Lahore Hudabya Engineering Ltd Lahore ______________________ _______________________________ M & J Engg. (Pvt ) Ltd State Engineering Corporation. ATMOSPHERIC DISTILLATION UNIT A- Towers - Shell 01. Atmospheric Distillation Tower(TOP) 02. Atmospheric Distillation Tower(Bottom) 03. Heavy Naphtha Side Stripper 04. Kerosene Stripper 05. Light Gas Oil Stripper B Heat Exchanger - Shell and Tube 06. Atmospheric Tower Overhead/Crude Exchanger 07. Top Pump round/Crude Exchanger 08. Heavy Gas Oil/Crude Exchanger 09. Kerosene/Crude Exchanger 10. Light Gas Oil/Crude Exchanger 11. Vaccum Tower PA/Crude Exchanger 12. Atmospheric Tower BPA Crude Exchanger 13. Heavy Gas Oil/Crude Exchanger 14. Light Fas Oil/Crude Exchanger 15. Vaccum Tower PA/Crude Exchanger 16. Vaccum Tower Residium/Crude Exchanger 17. Vaccum Tower Residium/Crude Exchanger 18. Atmospheric Tower Overhead 2nd Stage Condenser 19. Heavy Naphtha Stripper Reboiler 20. Kerosene and Cooler 21. Process Water/Sour Water Exchanger

188

22. Atmospheric Tower PA/Steam Generator C- Process Tanks & Accumulators 23. Atmospheric Tower Reflux Drum 24. Atmospheric Tower 2nd stage Receiver 25. Desalter 26. Process Water Surge Drum D- H.E. Equipment - Special 01. Atmospheric Tower Overhead Air Condenser. VACCUM DISTILLATION UNIT A- Towers _ Shell 01. Vaccum Column(Top) 02. Vaccum Column(Middle) 03. Vaccum Column(Bottom) 04. LVGO side stripper B- Heat Exchanger - Shell and Tube 05. Vaccum Tower TPA/Cooler 06. LVGO Cooler 07. Vaccum Tower Pump around/Steam Generator 08. Vaccum Tower Pump Residium/Steam Generator 09. HVGO Cooler C- Process Tanks & Accumulators 10. Vaccum System Condenser Drum DE-ETHANISER/ ABSORBER UNIT A- Towers - Shell 01. De-ethaniser B- Heat Exchanger - Shell nd Tube 02. De-ethaniser Condenser 03. De-ethaniser Reboiler

189

04. LPG Cooler C- Process Tanks & Accumulators 05. De-ethaniser Reflux Accumulator DE-BUTANISER UNIT A- Towers - Shell 01. Dehutaniser B- Heat Exchanger - Shell and Tube 02. Debutaniser Condenser 03. Debutaniser Reboiler 04. Debutaniser Feed Preheater 05. Light Naphtha Cooler C- Process Tanks & Accumulators 06 Debutaniser Reflux Accumulator LPG SPLITTER UNIT A- Towers - Shell 01. C3/C4 Splitter 02. C3/C4 Splitter 03. C3 Dryer B- Heat Exchanger - Shell and Tube 04. Splitter Overhead Condenser 05. Splitter Reboiler 06. Dryer Reboiler 07. C4 product Cooler 08. C3 Product Cooler C- Process Tanks & Accumulators 09. Splitter Reflux Drum NAPHTHA HYDRO - TREATER UNIT A- Towers - Shell

190

01. Stripper (Top) 02. Stripper (Bottom) B- Heat Exchanger - Shell and Tube 03. Stripper Trim Condenser 04. Combined Feed/Effluent Exchanger 05. Stripper Feed/Bottom exchanger 06. Product Condenser 07. Stripper Condenser C- Process Tanks & Accmulators 08. Feed Surge Drum 09. Reactor Product Separator 10. Recycle Gas Kersone Oil Drum 11. Stripper Overhead Receiver 12. Water Break Tank 13. Make-up Gas Kersone Oil Drum 14. Stripper Feed/DIMS Exch. 15. Stripper BIMS TRIM Cooler 16. Make-up Gas Trim Cooler. CCR REFORMER UNIT A- Towers - Shell 01 Debutaniser B- Heat Exchanger - Shell and Tube 02. Debutaniser Feed/Bottom Exchanger 03. Debutaniser Trim Condenser 04. Platformate Trim Cooler 05. Feed/.Effluent Exchanger 06. Product Trium Condenser C- Process Tanks & Accumulator 07. product Separator 08. Net Gas Kerosene Oil Drum 09. Interstage Drum-I 10. Interstage Drum-II 11. Net Gas Chloride Treater 12. Debutanizer overhead Receiver 1 -Beot 13. Debutanizer Overhead Receiver(Boot)

191

LGO HYDRO - TREATER UNIT A- Towers - Shell 01. Stripping Column B- Heat Exchanger - Shell and tube 02. Reactor charge/Effluent heat Exchanger 03. Reactor Charge/Effluent heat Exchanger 04. Stripper Feed/Reactor Exchanger 05. Reactor Effluent Trim Cooler 06. Fresh Gas Kick-back Cooler 07. Stripper Feed/Dried Gas Oil Heat Exchanger. 08. Stripper Feed/Bottom Heat Exchanger. 09 Overhead Trim Cooler. C- Process Tanks & Accumulators. 10. LGO Charge Surge Drum 11. H.P. Separator 12. L.P. Separator 13. Fresh Gas Kerosene Oil Drum 14. Recycle Gas Kerosene Oil Drum 15. Stripper Overhead Accumulator 16. Wash Water Surge Drum. LGO DRYER UNIT A- Towers - Shell 01. Gas Oil Drying Column B- Heat Exchanger -Shell and Tube 02. Gas Oil Product Trim Cooler 03. Drying Column Overhead Condenser 04. Seal Liquid Circulation Cooler. C- Process Tanks & Accumulators 05. Gas Oil Charge Drum 06. Drying Column Overhead Accumulator 07. Seal Liquid Separator D- Tower- Trays and internals. 08 Shower Trays.

192

DELAYED COKER UNIT A- Towers - Shell 01. Main Fractionator 02. LCGO Stripper 03. HCGO Stripper 04. Depropanizer 05. Debutanizer 06. Naphtha Splitter 07. Blow -down Tower B- Heat Exchanger - Shell and Tube 08. VR Feed/LCGO Pump-around Heat Exchanger 09. VR Feed/HCGO Product Heat Exchanger 10. VR Feed/HCGO Pump-around Heat Exchanger 11. HCGO Product/MP Steam Generator 12. HCGO Product/Boller Feed Water Preheater 13. LCGO Pump around/MP Steam Generator 14. LCGO Product Cooler 15. Main Fractionator OVHD after Condenser 16. Compressor Interstage Cooler 17. Depropanizer Bottom Reboiler 18. Depropanizer Side Reboiler 19. Dlean Naphtha Trim Cooler 20. Debutanizer Reboiler 21. Naphtha Splitter Reboiler 22. Light Naphtha Product Cooler 23. Heavy Naphtha Product Cooler 24. Blow-down Quench Oil heater 25. Butane Product Cooler C- Sumps Pits, Basins & Separators. 26 Coke Drop - out Pad , Mase & Sumps. 27. Coke Sizer Pit & Sump 28. Coke Crusher Pit & Sump. D- Process Tanks & Accmulators. 29. Coke Drum Condenser Receiver 30. Fuel Gas K.O.Drum 31. Heater Decoking Quench Drum 32. Heather Condesner Injection Drum 33. Main Fractionator Overhead Receiver 34. Compressor Interstage Spearator 35. Recontacting Drum 36. Depropan Water Draw-off Drum

193

37. Debutanizer Overhead Receiver 38. Naphtha Splitter Overhead Receiver. 39. Blow-down Tower Overhead Separator. 40. Light Slop Drains Collect. Drum 41. heavy Slop Drum E- Storage Tanks 42. Clear Water Tank F- Elevators & Conveyors - Materials 43. Sized Coke Conveyor G- Crushed Coke Conveyor 44. Coke Crushers. HYDROCRACKER UNIT A- Towers - Shell 01. Stripper 02 Product Fractionator 03. Kerosene Stripper 04. Diesel Stripper 05. Debutanizer 06. Naphtha Splitter B- Heat Exchanger - Shell and Tube 07. Fractionator Bolloms Trim Cooler 08. Debutanizer Feed/Bottoms Cooler 09. Debutanizer Reboiler 10. Debutanizer Trim Cooler 11. Kerosene Stripper Reboiler 12. Fractionater Bottom Steam Generator 13. Naphtha Splitter Feed/Bottoms 14. Naphtha Splitter Reboiler 15. HVN Trim Cooler 16. LVN Trim Cooler 17. Feed/Hot Separator Vapour 18. Feed/Reactor Effluent C- Process Tanks & Accumulators. 17 Feed Surge Drum 18. Hot Separator 19. Cold Separator

194

20. Hot Flash Drum 21. Cold Flash Drum 22. Suction Drums 23. Rec. Gas Suction Drum 24. Cond. Break Drum 25. Stripper Overhead Receiver 26. Faction Overhead Receiver 27. Debutanizer Receiver 28. Naphtha Splitter Receiver. ASPHALT UNIT A- Towers - Shell 01. Wash Column B- heat Exchanger 01 LE Steam generator C- Process Tanks 01 Asphalt blowing drum 02. Surge drum FUEL GAS AMINE UNIT A- Towers - Shell 01. Sour Gas Amine Absorber 02. Coker Off-gas Amine Absorber 03. Amine Stripper(Top) 04. Amine Stripper (Bottom) B- process Tanks & Accumulators 05. Sour Gas Kerosene Oil Drum 06. Rich amine Flash Drum 07. Rich Amine Flash Drum(Column) 08. Coker Gas Kerosene Oil Drum 09. Amine Stripper overhead Receiver 10. Amine Melt Tank 11. Amine Sump Tanks C- Storage Tank

195

12 Amine Storage Tank D- heat Exchanger Sheet & tube 13 Cooker base coller 14. Amine Feed/bottom 15. Amine Shipper reboiler SULPHUR UNIT A- Heat Exchanger - shell and Tube 01. All Condensers 02. Auxillary Condenser No.1 03. Auxillary Condenser No.2 04. Waste heat Boiler 05. All Condesners 06. Preheaters B- Sumps, Pits Basins & Separators 07. Sulfur Collection Pit 08. Sulfur Degasing Pit C- Process Tanks & Accumulators 09 Amine Gas Separator 10 NH3 - Gas Separator D- Storage Tank 11. Sulfur Tank E- Stack (Flate & Vent and Suction) 12. Incinerator Stack 13. Waster Heat Boiler. SOUR WATER SYSTEM A- Towers - Shell 01. Sour Water Stripper B- heat Exchanger - Shell and Tube 02. Water Stripper Feed/Bottoms 03. Water Stripper Reboiler

196

04. Stripper Bottom Trim Cooler C- Process Tanks & Accumulators 05. Sour Water Degassing Drum 06. Sour Water Stripper Overhead Receiver. PUMPS : VARIOUS TYPES FUEL GAS SYSTEM A- Heat Exchanger - Shell and Tube 01. LPG Vapourizer 02. LPG Vapourizer D- Process Tanks & Accumulators 03. Refinery Fuel Gas Drum 04. Saturated Fuel Gas Drum FUEL OIL SYSTEM A- Heat Exchanger - shell and Tube 01. Fuel Oil Heater B- Storage Tank 02 Refinery Fuel Oil Tanks COOLING WATER SYSTEM A- Sumps, Pits Basins & Separators 01. Sea Water Intake Bag B- Process Tanks & Accumulators. 02. Cooling Water Expansion Tank PLANT AIR SYSTEM A- Process Tanks & Accumulators 01. Plant Air Receiver. INSTRUMENT AIR SYSTEM

197

A- Process Tanks & Accumulators 01. Instrument Air Receiver. INTER GAS SYSTEM A- Process Tanks & Accumulators 01. Nitrogen Storage Vessel. REVERSE OSMOSIS UNIT A- Sumps, Pits, Basins & Separators 01. R.O. Plant Feed Basin. 02. Treated Fresh Basin BOILER FEED WATER SYSTEM A- Sumps, Pits Basins & Separators 01. Demin, Plant Feed Tank 02. Neutralization Pit B- Storage Tank 01 Demin Water Tank C- Package Unit - Major 01. De-mineralizer Plant STEAM GENERATION UNIT A- Process Tanks & Accumulators. 01. Boiler Blow- down Drum B- Steam Boilers & Super heaters 01. Utility Plant Boilers C- Package Unit 01. Phosphate Dozing Set. Boilers and dearators can be manufactured in Pakistan Electrical equipment like switchgear etc. can also be manufactured in Pakistan.

198

CONDENSATE RECOVERY SYSTEM A- Heat Exchanger - Sheel and Tube 01. Condensate Pre-heater B- Process Tanks & Accumulators 02. Condensate Flash Drum C- Storage Tank 03. Condensate Surge Tank TEMPERED WATER SYSTEM A- Process Tanks & Accumulators 01 Tempered Water Drum FLARE SYSTEMS A- Process Tanks & Accumulators 01 Flat Knockout Drum 02. Flat Knockout Drum (Boot) 03. Seal Drum WASTE WATER TREATMENT PLANT A- Sumps, Pits, Basins & Separators 01 Parallel Plate Separators (A) Basin 02. Parallel Plate Separators(B) Basin 03. Impounding Basin 04. DAF Basin 05 Activated Sluge Treatment Basin. 06. Clarifier Basin 07. Sluge Dying Basin B- Storage Tank 08. API Slop Tank. SLOP SYSTEM A- Storage Tank

199

01. Light Slop Tank 02. Heavy Slop Tank. SPENT CAUSTIC TREATMENT SYSTEM A- Storage Tank 01. Spend Caustic Storage Tank TANK FARM A- Storage Tank 01. Crude Tanks 02. LPG Tanks 03. Unleaded Gasoline Export Tanks 04. Motor Gasoline Tanks 05. HOBC Tanks 06. Naphtha Export Tanks 07. Jet A-4 Tanks 08. Jet A-1 Tanks 09. LDO Tanks 10. HSD Tanks 11. Asphalt Tanks 12. Butane Tanks 13. SR.L.T.Naphtha Tanks 14. L.T.HCR Naphtha Tanks 15. L.T.Coker Naphtha Tanks 16. L.T.Heavy Naphtha Tanks 17. Reformate Tanks 18. VGO Tanks 19. Vaccum Resid Tanks. CHEMICAL STORAGE & HANDLING A- Process Tanks & Accumulators. 01. Acid Storage Drum 02. Caustic Storage Drum 03. Caustic Dilution Drum B- Storage Tank 04. Caustic Dissolving Tanks MARKETING PIPELINES A- Package Unit - Major

200

01. Marketing Pipelines. LPG BOTTLING PLANT A- Package Unit-Major 01. LPG Bottling Plant. MISCELLANEOUS EQUIPMENT. A- Fired heaters 01. Radiant & connection coils 02. Steel Structure. 03. Stack etc. B- Air Coolers (Condensors) 01. Fin Tube bundles C- Steam Boilers. D- Heat Recovery Boilers E- Atmospheric Storage Tanks 01. Cone Roof 02. Dome Roof 03. Int. Floating Roof 04. Floating roof F. Spherical Storage Tanks. G- Steel Structure H- Piping I Fire Fighting Equipment J- Workshop equipment. K- Water Treatment Plants. L- Electrical Equipment. 01. Switchgear (IIV, MV, LV) 02. Motor Control Center 03. Instrument Panels

201

04. Power Electronic Equipment 05. Sub-station equipment etc. 06. Power Transformers (6.3 - 40MVA). 07. Distribution Transformer (0.6-4 MVA) 08. I.T. Instrument Transformers 09. 11 KV Bulk Oil Circuit Breaker 10. 11 KV Dropout Cutout Fuse with Fuse link 11. Power Factor Improvement Plant. 12. Energy Meters (Single and three phase) Annexure-IV SUGAR PLANT UPTO 10,000 TCD Scope of engineering services and equipment manufacturing locally:- Basic & Detailed Engineering Plant payout Process design Heat balance Material balance Water balance Piping design Electrical design Instrument and control design Equipment Design Detail equipment design including workshop drawing Erection/installation drawings. Installation and Commissioning Services. Supervision for installation, erection and commissioning services. LIST OF EQUIPMENT MANUFACTURED LOCALLY Platform for weigh bridge. Cane feeding table(drag type, slate type) Truck tipper (rectangular, rotary) Cane Carrier. Cane leveler. Cane cutting knives. Cane shredder Prepared cane elevator Cane crushing mills Mill cooling water piping. Inter conveyors Service platform & gangways Receiving tanks made of mild steel & stainless steel Set of imbinition & juice piping, service hand box only. Seive & double reduction low speed gearing Overhead travelling crane(without hoist & controls)

202

Belt conveyor Juice Scale. Juice Heaters. MOL doasing apparatus Bucket elevator. Lime slaker MOL vibrating screen. Flashing vessel. Door type & SRI type clarifier Vaccum filters Cascade condenser Mud overflow tank Mud mixer Bagacillo blower. Cyclone bagacillo separator and ducting Bagacillo screen with hopper Evaporators. Condesnate receiver Vaccum pans(batch type) Crystallizers (air cooled & water cooled) Vertical crystallizer Open seed crystallizer. Vaccum crystallizers Multi jet condesners Spray pond. Continous centrifugals. Feed mixer. Screw conveyor Sugar remeltor Magma minglers single/double paddle. Raw sugar remelter. First carbonation tank. Second carbonation tank. Remelt sulphitator Rotary pressure filter. Aereation tank. Telofloc clarifier Scum clarifier Gross hopper conveyor. White sugar dryer Air heater Dry cyclone, wet cyclone Sugar screen. Sugar Storage bins Bag conveyor Bag stacker. Baggasse Fired Boiler Steam drum Water Drum

203

Boiler tube bank Furnace walls complete with headers. Super heater Headers Boiler supporting structure. Working platform Steel casing. Air heater Dumping grates & feeder. Economizer. I.D.F.D. & S.A. fans Fly ash arrestor. Observation ports, inspection/access doors. Hoppers. Flue gas ducts. Chimney stacks. Integral piping. Blow down tank. Water sampling device. Thermal deareator. Deareator storage tank. Feed water softening plant. Bagasse conveyors. Steam distribution header. Manual crane (without hoist, etc.) Miscellaneous Staging flooring etc. All fabricated piping, ducts, hangers, supports, expension joints, flanges and distribution headers. Flue gas dust catcher. Gas scrubber. Sulphur furnace. LOCAL VENDOR ITEMS Centrifugal pumps(open impeller & chock less type)(for water, juice, syrup MOL , mud, slurry) Sequeral gauge electric motors. Massesecuite, molasses, magma pumps. Injection water pumps(upto 1750 M/hr, 22 M) Spray water pumps Cooling tower equipment Manually operating hoists. Leaves for pressure filter. Bagasse Fired Boiler Refractory and insulation bricks. Boiler insulation/cladding. Electric driven feed water pump with motor. Turbo driven feed water pump without drive.

204

Water softening plant pumps. Motor control. Piping & fittings Insulation & lagging Power House Cable & sub station/transformer Battery and static capacitor. Set of low voltage switch board. Miscellaenous

All medium pressure piping, fittings, G.I. piping & fittings, hanger, supports, duplex valves nuts, bolts, washers & jointing materials.

Set of insulation material. Work shop equipment. IMPORTED ITEMS Road vehicle weigh bridge without platform. Variable speed drive (Ac/DC/Hydraulic type) Hydraulic system for truck tippler. All electric geared motors (low rpm) Steam turbines (single and multi stage) Automatic speed regulating equipments) Magnetic separator(rotary/suspended/self cleaning type) Hydraulic system for mill. Multi point lubricators for mill. Imbition water flow recorder. Screen DSM & rotary type. High Speed gear boxes. Hoist, trolley, drive & control for crane. Centralized mill control disk. Mill roller lathe. Control instruments for MOL. Mud diaphragm pump. Coagulant metering pump. Custometer and panscope for vaccum pans. Vaccum regulating valve. Vaccum pump. Tube Cleaners & tube expanders. Electric butterfly valves for vaccum pan. Electric sugar detector. Massecuite/molasses/magna pumps. Cloth for rotary pressure filter. Meltering & dosing pumps. Talofloc drum heater. Impeller/agitators with drive. Talofloc educator. Aeration pump & air flow meter.

205

Talo deep bed filter complete with accessories. Blower. Batch type, centrifugal for R-massecuite. Hot wash water plant. Oil free air compressor. Sack filling machine. Check weighing scale. Bag sewing machines. Bagasse Fired Boiler. Scoot blowers and tube expander. Bagasse combustion equipment except dumping grate and feeder. Oil combustion equipment. Drive for rotary valve. Special refrectories, castable/moldable & jointing motor. Calcium salicate. Valve & mountings. Intergral & technological piping & fittings. Blow down valves, level, pressure guages & controls. Instrument & controls. HP, LP chemical dosing equipment. Turbine for feed water pump. Chemical resin. Instruments & controls for boiler. Oil pumping & heating unit. Valves mountings, gauges, steam traps & fittings. Tube expanders. Power House Turbo alternators. Bus-bar for turbo alternator set. Switch board. H.T. cables. Storage batteries. Crane parts (Hoist only). Diesel alternator. Miscellaneous Set of high pressure piping and fittings, steam traps strainer, expansion bellows, etc. De-super heater(steam automoizer, instruments & controls). Pressure reducing valves, instruments & controls. Safety valve. Set of integrator/Recorder. Laboratory equipments. Annexure-V

206

CLASSIFICATION OF MANHINERY SUPPLIES FOR CEMENT PLANT UPTO 4000 TONS/DAY CAPACITY LEGENDS: LIST "A' LOCAL SUPPLIES LIST "B" FOREIGN PARTNER'S IMPORTS LIST "C' LIST OF LOCALLY ENGINEERED AREA for Heavy Mechanical Complex Ltd. (Ahmed Sajjad Khan) Deputy General Manager for DESCON Engineering (Pvt) Ltd. (Bashir Ahmed Malik) Resident manager for Karachi Shipyard & Engineering Works (Siddiq Ahmed) Deputy Superintendent. (LOCAL SUPPLIES) LIST "A" Dated 06.04.1995 CLASSIFICATION OF MACHINERY SUPPLIES FOR CEMENT PLANT UPTO 4000 TONS/DAY CAPACITY S.NO. DESCRIPTION DESIGN SCOPE OF LOCAL SUPPLIES _______________________________________________________________________ 1. Air lift Local Cylinderical steel tanks Internal discharge pipes. Special aeration bottoms Compressed air nozzles Material pipe Fabric Butterfly valves. Rotary piston blower. 2. Air separators/Classifiers Foreign Rotors (Mechnical For ball Mills) Stator parts. Liners(of carbon steel) Drive supports Platforms and ladders. 3. Air Separators/Classifiers for Foreign Casing and structual parts. roller mills. 4. Air separator/Classifiers(High Foreign Rotor, liners casing supports. efficiency)For cement mills.

207

5. Apron Conveyor/Clinker Local Shafts conveyors Runway supports. Drive station Take up stations Buckets with bolts Intel hood Discharge hood Frame work Chain wheel hubs. Base frame Rollers/Chains Sprocket teeth segmeal Rails Tensioning device Drive unit 6. Apron Feeders/Plate feeder Local Apron deck assy including

sprocket bearing/housing, shafts, tensioning, device, structure, inlet and outlet hood, base frames, coupling guards. Buffer springs,rubber shocks, drive and driven sprockets, roller chain, gear box and couplinos. 7. Bag Divertors Local Divertor Actuator 8. Bag Loaders/Truck Loaders/ Local Steel frame Lorry loaders. Travel carriage Pulleys and shafts Tensioning device Idlers Belts Moterised pulley Travel drive units. Hoist unit Electrical & control equipment. 9. Ball Mill Foreign Parts for inlet Casings Parts for oulet casings Top sections for outlets Parts for diaphragms Parts for outlet chamber Inlet cone Centre section of mill shell Lining rings, mill shell Liners, grinding media.

208

10. Ball mill (with trunions) Foreign Trunions,(below 5100 mm outer dia and 500 mm height) Mill Shell with flange(outer dia 3100 mm and below) Trunion bearing Base Frame with anchoring. Diaphragm, Girth gear Guard, inlet & outlet screens, inlet & outlet housing, shell liners, Trunion and Diaphragm liners, grinding Media. 11. Belt Conveyor Local Pulleys & shaft assembles Idler supports Discharge stations Supporting structures Take-up station Skirt plates with feed inlets covers Drive guards Rubber curtains Scrappers Inlet & outlet chutes Rubber belts Idler rollers Lagging for pulleys Drive unit, Switches, motion sensors etc. 12. Blending Silo Equipment/ Foreign Distributor for silo feeding Pre-homogenising Silo equipment Silo vent valve Open air slides for aeration Air piping Silo man- hole Collection box Silo inlet Steel cone Sounding pipe. 13. Boile Unit/Heal Transmitting Foreign Chimney oil producer Tanks Gallery and ladder. 14. Bridge Recalimers Foreign Main girders Rake cars Towers Harrows Scrapper blades Roller tables Gangways

209

Frames for scraper chains Travelling carriages Excl. Wheels Cabin Drive stations Rail clamps and foundation bolts Roller chains Scraper chains Winches, incl. pulleys Drive units Tensioning device for scraper chain Hydraulic equipment |Idlers for roller tables Rails for tracks Chain wheels, Carriage wheels Electrics & controls. 15. Bucket Elevators Local Casings Inspection doors Buckets Drive stations Take-up stations Shaft assemblies including tensioning device and bearing/Hosuing Chain wheel, replaceable segments, Chains, shackles, distance plates Drive unit Motion detector 16. Burner Suspension Local Frame Rails Burner trilley Duct for ventilation Trolley drive Controls. 17. Cement Silo Equipment Local Distributor for silo feeding Silo vent value Open air slides for aeration Air piping/Fittings/Valves Silo man-hole Collecting box Silo inlet Steel cone Sounding pipe Polyester fabric Butterfly valves

210

Cut off valves Flow control gates Level indicators Rotary piston blowers Slide gates Divertion gates Control Air piping. 18. Chain Scrapers/Spillage Local Troughs

conveyors Frameworks Scrapers Casing Shafts Bearings Bearings housing Chain wheels Chain & shackles Rails Drive unit Motion Sensors etc. 19. Change-over Gates/Diverters Foreign Gates Control cabinets Actuators Limit switches Position indicators 20. Compressors, dryers and Foreign Air receivers Air Receivers Piping. Compressors with accessories. Air driers. Valves Sequence Controllers Drives. 21. Conditioning Towers/ Foreign Casing Spray Towers Structure Screw conveyor Platforms Water tanks Piping. 22. Cranes/mono-rail and Hoists Local Crane bridges Tracks and monorails Control panels Wheels, end-carriages Hoist Grab/trolley

211

Power supply lines Pendant control system Travel geared motors with brakes Limit switches. 23. Crushers(Hammer Type) Foreign Flywheel for limestone Casing Base frames Rotor assembly Impact plate Anvil, grate bars, Outlet grate Hammers Hammer extraction device Hydraulic parts Drive unit Oil cooler Electrics & instruments Bearings with Housing V-belts 24. Crusher(Hammae Type) Local Flywheel For Gypsum Casing Base frames Rotor assembly Impact plate Anvil, grate bars, Outlet grate Hammers Hammer extraction device Hydraulic parts Drive unit Oil cooler Electrics & instruments Bearings with Housing V-belts 25. Crusher(Roller Type) Foreign Casing Flysheel Base Frame Rotor Assembly Overhead protection Buffer springs Drive unit Bearings with Housings. 26. Crushers(Impact type) Foreign Casing liners, base frames, guards Hydraulic

212

Rotor assembly Drive. 27. Dampers/Louvers Foreign Dampers Actuators Limit, switches Position indicators Drive unit. 28. Drag Chain Conveyors Foreign Casing, links, chain,

sprockets, shafts, tensioning device, structure, inlet and outlet chutes drive.

29. Dust Filters/Bag Filters Local Casing, structure, screw conveyor

and all internal parts. Guages, valves, timers, rotary air lock and other special parts Drive Unit.

30. Electrostatic precipiators Foreign Frames for casing s Plates work for casings Bollom hoppers for casings Inlet and outlet translations Distribution screens Ladder and platforms Screw conveyer Bearings and housing 31. Fans(Larger ones like Foreign Casing Kiln and Cooler, ID,EP Frames and Separator fan) Guards 32. Fans(Dust collector) Local Rotor assembly,casing base frames, guards Inlet vane controller actuators, vibration pads, spun cones, bearings/housings V-belts and pulleys Couplings. 33, Fans (Clinker cooler) Local Rotor assembly, casing base frames, guards

Inlet vane controller actuators, vibration pads, spun cones, bearings/housings V-belts and pulleys & piezo rings, couplings.

34. Flap gates/Blast Gates Foreign Gates 35. Fluxo Slides/Air Slides Local Casing Air piping, Inlet and out let chutes,supports

213

Polyester fabric, wire mesh Fan. 36. Grate cooler/Clinker Coolers 36.1 Conventional type Foreign Casing, stationary and movable

grate assembly side walls, crank drive assembly, chutes, clinker breaker housing and rotor assy.

36.2 Controlled flow grate type Foreign Casing, side walls, chutes, clinker breaker housing

and rotor assembly 37. Hot Gas Generator/Heat Foreign Casing generator/Air Heater 38. Kiln Foreign Klin shell, kiln shell under tyre portion(below 65 mm

thickness and 2000 mm width) tyres (upto outer dia 5100 mm), tyre fastening, gear mounts, roller with shafts, bearing housings, thrust roller, base frames, auchor bolts gear guards, heat inlet ring, feed hood fire-hood, inlet and outlet seals.

39. Kiln Feed System Local Tank, Sampler Air slide casings Pipe fittings Butterfly valves Level indicators Flow control gates Polester fabric Load cells Slide Gate Flow control gate Weigh feeder/import flow meter. 40. Oil tanks Local Tanks Level Indicators Toggle switches Solenoid valves Heading equipment 41. Packing Plant Equipment Foreign Worktable Local Guard plate Packer bins

214

Hoppers Platforms Screw conveyer Diverting pipe Packers Vibrating screens Level indicators Rotary feeders Discharge belts conveyor/roller ways Bag cleaners Broken bag discharger Telescopic chute Drive units Motorised pulleys Conveyors belt Idlers, switches. 42. Preheater/Calciner Foreign Cyclones Riser pipes Central tubes Calciner Casing Distribution boxes Clean-out ports Air lances Doors Tertiary air duct. 43. Rotary Feeder Foreign Casing Wheel Drive bracket Bearing with housings Rubber bushes Drive 44. Roller Press Foreign Casing Frame Foundation plates 45. Roller Mill Foreign Mill stand , Mill body, service platform, removable rails. 46. Screw Conveyor Local Casing Screw shaft Brackets Bearings Drive unit, switch/sensor Grease lubrication systems. 47. Side Scrappers Foreign Scrappers blades Port frame

215

Discharge tables Rail clamps Foundation parts for tracks Travel carriages excl. Wheels, Cabin Drive unit Sprockets Roller chains Travelling wheels Hoisting units Carrying idlers Rails Electric & controls 48. Stackers Foreign Conveyor structure Travel carriages excl. Wheels Jib steel structures Throw-off car Gangways Platforms Cabin Rail clamps Conveyor pulleys Foundation parts for tracks Travel wheels Conveyor belt Idlers Drive unit Hydraulic parts Rails 49. Vibration feeders Foreign Electric & controls Rod gates with limit controls Discharges slides Troughs, supports covers Suspension parts Magnetic vibrators Thyristor units, Drives. 50. Weigh Bridge Foreign Beams for bridge Supports for bridge Platform Load cells Weighing indicators Printer. 51. Weigh Feeder Foreign

216

52. Miscellaneous equipment Local/ Hopper lining Foreign Pipes and bends Throttle valves Chutes and spouts Foundation bolts Tubes Supports/Structure M.S. Silo/bins Platforms Cyclones Steel parts for expansion joints Ducts Steel stack Embedment parts Base plates and frames Guards Portable fire extinguishers Tanks Water treatment plant Gas bottle units Drain pumps Insulation Water pumps Evaporation cooler Piping and fittings Valves Workshop Equipment Disengaging box Needle gate Silo side door/man-holes Silo vent valve Preheater Steel Tower. Tertiary/Secondary air duct Setting chamber Canopy for clinker Silo Steel structure for pre-hamogenising yard Belt Weighers Building structures

Expansion joint fabric with special glues and adhesives

53. Electrical items Local Power Transformer, 53.1 High Voltage Switch Gear with Transformer 132/6.3KV. Metering & Protection Panel, Steel Structure, auxiliary Panels, Switch board, Battery chargers

217

Components for meterings & protertion Panels Components for auxiliary panels, Current

transformers, Potential transformers, surge arrestors, line isolators, Neutral Resistors, Batteries & Circuit breakers.

53.2 Medium Voltage Switch Gear Local Gubicles for incoming and outgoing Feeders, Switch board, bus tie ducts, power factor

improvement plants Circuit breakers Components for M.V. switch gear on load Dis-connecting switch(upto 6 KV) 53.3 Low voltage Switch Gear Local Cubicles for incoming & outgoing Feeders, Distribution borad(AC/DC) power factor

improvement plants. Circuit breakers, Components for L.V. switch gear. 53.4 Motor Control Centers. Local Cubiles for Motor Starters(MV/LV) Components for motor starters. 53.5 Distribution Transformers Local Complete 53.6 Variable Speed Motors(DG) Foreign 53.7 Variable Speed Motors(AC) Local AC motor, drive control panel, thyrister control

panels Thyrister modules. 53.8 Medium Voltage Motors Foreign 53.9 Low Voltage Motors Local Complete 53.10 Engineering Power Supply Local Complete 53.11 Field Instrumentation Foreign 53.12 Process Monitoring System Foreign PLC Systems, Hard ware/Soft ware

engineering, control desks, wiring , Electronic modules and special devices.

53.13. Kilsn Cooler TV-System Foreign

218

53.14 Kiln Diagnostic System Foreign 53.15. Inter Communication System Foreign 53.16 X-Ray Spectrometer Foreign 53.17 Auxiliary UPS system Foreign 53.18 Signal & measuring Cables Foreign 53.19 Medium Voltage Cables Local Complete. 53.20 Low Voltage Cables Local Complete 53.21 Erection Material Local Complete 53.22 Plant Lighting System Local Complete 53.23 Lightening & Grounding System Local Complete 53.24 Telephone system Local Complete 53.25 Diesel Generating sets Local Complete except engines (Upto 1000 KVA) Above 1000 KVA) Foreign NOTE: Parts, components and sub-components mentioned in the column Scope of local supplies "includes certain items to be imported by recognized manufacturers to complete the assembly.

List "B" CLASSIFICATION OF MACHINERY SUPPLIES FOR CEMENT PLANT UPTO 4000

TONS/DAY CAPACITY S.No. DESCRIPTION DESIGN FOREIGN PARTNER’S IMPORTS -------------------------------------------------------------------------------------------------------------------------------- 1. Air Lift Local 2. Air separators/Classifiers Foreign Liners(of wearing material) (mechanical For ball Mills) Gearboxes, Couplings, Varitable speed motor.

219

3. Air Separators/Classifiers Foreign Gate feeder, for roller mills pneumatic Cylinders, seals, drive etc. 4. Air Separator/Classifiers Foreign Liners of wearing materials (High efficiency) For pipes (of wearing materials) cement mills Valves/Air locks, drive lube system. 5. Apron Conveyor/Clinker Local conveyors. 6. Apron Feeders/plate feeder Local 7. Bag Divertors Local 8. Bag Loaders/Truck Loaders/ Local Lorry Loaders. 9. Ball Mill(with slide shoe Foreign Mill shell inlet section with slide ring, bearings) Mill shell outlet section with slide ring. Grates and supporting rings for diaphragms Forged

bolts for liner, plates, Slideshoe bearings Lubrication units Erection tools Bellows for expansion Joints water injection equipment, Drive Unit.

10. Ball mill(with trunnions) Foreign Mill shell, (with flange outer dia more than 3100

mm), ball sockets, Girth Gear, Pinion, or pinion bearing, with housing Lube system, water injection system, Gear Boxes & couplings, Glutch, Hollow shafts mill lube and jack- up pumps, liner bolts, Trunnions(above 5100 mm outer dia and 2500 mm height)

11. Belt Conveyor Local 12. Blending Silo Equipment/ Foreign Polyester fabric Pre-homogenising Silo Butterfly valves Equipment. Cut off valves Flow control gates Level indicators Rotary piston blowers Control air piping Slides gates Divertion gates, flow meters,

220

control unit and instruments. 13. Boiler Unit/Heat Transmitting Foreign Complete except local items oil producer 14. Bridge Reclaimers Foreign 15. Bucket Elevator Local 16. Burner Suspension Local 17. Cement Silo Equipment Local 18. Chain Scrapers/Spillage Local conveyors 19. Change-over Gates/Diverters Foreign 20. Compressors, dryers and air Foreign Receivers. 21. Conditioning Towers/Spray Foreign Water injection system Nozzles Towers. Water filters Centrifugal pump Units(with low volume and high head) Rotary air lock. 22. Cranes/mono-rail and Local Hoists 23. Crushers(Hammer Type) Foreign for limestone 24. Crusher(Hammer type) Local For Gypsum 25. Crusher(Roller Type) Foreign 26. Crushers(Impact type) Foreign 27. Dampers/Louveyors Foreign 28. Drag Chain Convers Foreign 29. Dust Filters/Bag Filters Local 30. Electrostatic precipitators Foreign Drive unit Electrical equipment Discharge electrodes

221

Collecting plates Internal parts Hammer and rapping bars Rotary air lock. 31. Fans(Larger ones like Kiln Foreign Impellers and Cooler ID,EP and Shafts Separator fan) Bearings/ housing Electrics & instruments, Variable speed motor, V-belts and pulleys, actuators, vane controllers,

couplings. 32. Fans(Dust collector) Local 33. Fans(Clinker cooler) Local 34. Flap gates/Blast Gates Foreign Solenoid valves Limit switches Pneumatic cylinders 35. Fluxo Slides/Air Slides Local 36. Grate, Cooler/Clinker Coolers 36.1 Conventional type. Foreign Bottom gates, instrumentation and controls,

lube system, drive Unit Seals bellows, V-belts, bearing/housings, Chains, Shackles.

36.2 Controlled flow grate type Foreign Bottom gates, instrumentation and controls, lube system, drive Unit, Seals bellows, V-belts. bearings/housings, Chains, Shackles Moving and fixed grate assembly. 37. Hot gas Generator/Heat Foreign Lining generator/Air Heater Burner station Fans Controls Refractories. 38. Kiln Foreign Girth gear, tyres(above 5100 mm outer dia)pinion,

pillow blocks, gear boxes, clutches couplings, parts of kiln seals, lube system, diesel engine(if required), pneumatic cylinders, seals, Burner and controls Kiln

222

Shell Portion(above 65 mm thickness and 2000 mm width)

39. Kiln Feed System Local 40. Oil Tanks Local 41. Packing Plant Equipment Local/ Foreign 42. Preheater/Calciner Foreign Bellows, Sluice haps Shock blasters Sequence controller immersion pipes Burner and Controls. 43. Rotary Feeder Foreign 44. Roller press Foreign Roller bodies Bearings with housings Seals Hydraulic equipment Drive unit and instrumentation and controls. 45. Roller Mill Foreign Grinding table, grinding rollers, lube system,

grinding parts, grinding rings, grinding tyre, grease pump, rocker arms, Hydro pneumatic Springs system, mill drive, Seal air blower, Mill monitoring/interface Cabinet, Water injection unit.Hydraulic swing device, Hydraulic cabinet, Service tools.

46. Screw Conveyor Local 47. Side Scrappers Foreign 48. Stackers Foreign 49. Vibration feeders Foreign 50. Weigh Bridge Foreign 51. Weigh Feeder Foreign Complete with drive and controls 52. Miscellaneous Equipment Local/ Sampler Foreign Refractories & castables Pressure equalising valve Oil pumps Oil heating coils and heaters Oil pumps and heating unit

223

Burner equipment Soleniod valves Safety valves Butterfly valves Laboratory equipment Quality control system. Change-over gate Hydraulic cylinders Elevators Samples Motion Detectors, Emergency stops, Belt drift switches. Pull-card switches Metal detector, Magnetic Seperator Weigh belt scales Side dischargers Primary/secondary air fans Silo extraction gate platform weigh scales Clinker weighing unit. 53. Electrical items 53.1 High Voltage Switch Gear Local with Transformer 132/6.3 KV. 53.2 Medium Voltage Switch Gear. Local On load dis-connecting switch above 6 KV 53.3 Low Voltage Switch Gear Local 53.4 Motor Control Centers Local 53.5 Distribution Transformers Local 53.6 Variable Speed Motors(DV) Foreign Complete. 53.7 Variable Speed Motors(AC) Local 53.8 Medium Voltage Motors Foreign Complete 53.9 Low Voltage Motors Local 53.10 Engineering Power Supply Local 53.11 Field Instrumentation Foreign Complete

224

53.12 Process Monitoring System Foreign 53.13 Kiln/Cooler TV-System Foreign Complete 53.14 Kiln Diagnostic System Foreign Complete 53.15 Inter Communication System Foreign Complete 53.16 X-Ray Spectrometer Foreign Complete 53.17 Auxiliary UPS System Foreign Complete 53.18 Signal & measuring Cables Foreign Complete 53.19 Medium Voltage Cables Local 53.20 Low Voltage Cables Local 53.21 Erection Material Local 53.22 Plant Lighting System Local 53.23 Lightening & Grounding Local System. 53.24 Telephone system Local 53.25 Diesel Generating Sets Local (Upto 1000 KVA) (Above 1000 KVA) Foreign Complete.

List "C"

CLASSIFICATION OF MACHINERY SUPPLIES FOR CEMENT PLANT UPTO 4000 TONS/DAY CAPACITY

1. Limestone and Clay Crushing Area. 2. Raw Materials Pre-Homogenizing Areas. 3. Clinker Transport Storage and Mill Feed. 4. Gypsum Crushing and Transport. 5. Cement Silos. 6. Packing Plant 7. Compressed Air system.

225

8. Fuel oil system 9. Water System.

Annexure-VI

GAS PROCESSING PLANTS LOCALLY MANUFACTURED EQUIPMENT

- Two/Three phase separators. - Absorption tower/columns (wall thickness upto 120 mm) - Process reactors(wall thickness upto 120 mm) - Pressure vessels (based on ASME code) Tubular heat exchangers (TEMA standards) - Tubular condensers(TEMA standards) Plain/Fin tube air coller (excl. fans) - LPG storage tanks(based on ASME codes) - Oil storage tanks(based on API codes) - Heat recovery boilers - Steel structures. - Process & utilities piping. - Off-site utilities. - Gas sweetening unit(Amine absorption unit) - Gas dehydration unit(Glycol, dehydration plant) - Flare stack system - LPG recovery unit. - Sulphur recovery unit. Exclusion: - Rotary equipment like pumps, compressors, Turbines Power generation unit. Instrumentation & control system. High pressure valves & pipe & fittings. Internals, filters, demister, seals etc. Vendor items for process unit. Note: The locally manufactured equipment will be based on foreign technology partner process design/basis engineering.

Annex-VII BASIC CHROMIUM SULPHATE PLANT LOCALLY MANUFACTURED EQUIPMENT. - Ball mills - Bucket elevators. - Screw conveyors. - Belt conveyors. - Rotary kiln.

226

- Rotary drier. - Evaporators. - Reactor vessel. - Steam boiler. - Waste heat recovery boiler. - Mixers/Agitators. - Dust collector. - Industrial fans. - Storage tanks. Exclusion: Gear drives, D.C. motors, cone crushers, vibrating screens, vaccum filters, vaccum pumps, open impeller pumps, titanium heat exchanger & reactor, steam ejector, filter presses & centrifuges, Bag packing-sealing & sewing machines, Dense phase conveying system, oil firing system for kiln & driers, weigh feeders, air compressor, rotary piston blower.

Annex-VIII

BALL BEARING OF THE FOLLOWING SPECIFICATIONS WITH A TOLERANCE UPTO 2 MM ON PLUS OR MINUS SIDES IN INNER AND OUTER DIAMETER

Bearing Designation Bore Dia mm Outside Dai mm Width mm --------------------- ----------- ------------- --------- 6000/6,000/000 10 26 8 6001/6,001/001 12 28 8 6002/6,002/002 15 32 9 6003/6,003/003 17 35 10 6004/6,004/004 20 42 12 6005/6,005/005 25 47 12 6006/6,006/006 30 55 13 6007/6,007/007 35 62 14 6008/6,008/008 40 68 15

227

6009/6,009/009 45 75 16 6010/6,010/010 50 80 16 6011/6,011/011 55 90 18 6012/6,012/012 60 95 18 6013/6,013/013 65 100 18 6200/6,200/200 10 30 9 6201/6,201/201 12 32 10 6202/6,202/202 15 35 11 6203/6,203/203 17 40 12 6203/6,203/204 20 47 14 6204/6,204/205 25 52 15 6206/6,206/206 50 62 16 6207/6,207/207 35 72 17 6208/6,208/208 40 40 18 6209/6,209/209 45 35 19 6210/6,210/210 50 90 20 6211/6,211/211 55 100 21 6212/6,212/212 60 110 22 6213/6,213/213 65 120 23 6300/6,300/300 10 35 11 6301/6,301/301 12 37 12 6302/6,302/302 15 42 13 6303/6,303/304 20 52 15 6305/6,305/305 25 62 17

228

6306/6,306/306 30 72 19 6307/6,307/307 33 80 21 6308/6,308/308 40 90 23 6309/6,309/309 45 100 25 6310/6,310/310 50 110 27 6311/6311/311 55 120 29 6312/6,312/312 60 130 32 6313/6,313/313 65 140 33