Custom Fabricating & Supplies

WE HAVE YOU COVERED

Long known as a premier supplier of industrial masking supplies, CFS routinely works with custom powder and e-coaters, OEMs and suppliers to solve their most complex masking issues. Custom die cuts, kitting, sheeting, perforating, multi-layer laminations, zone adhesive, island placement and kiss cutting are offered on most of our extensive library of materials. We can design custom silicone, EPDM and vinyl caps and plugs to mask threads, pems, voids and holes to ensure efficient and clean finishes after powder coating, e-coating, anodizing, and plating. Our new, patent-pending vent plug reduces plug loss without leakage.

Pressure sensitive adhesives and die cuts can help reduce costs, improve production efficiencies and simplify your assembly process. To make sure you are getting the best product, we ensure that you receive the correct adhesive, carrier and liner to meet your requirements. We work closely with you to balance cost and performance.

New in July 2020 is an ISO 7, Class 10,000 Clean Room. While most often associated with the medical sector, the benefits of clean room die cutting isn’t restricted to only healthcare applications. Clean room manufacturing is used by pharmaceutical, electronic, military and LED lighting industries requiring low particulate, humidity and temperature-controlled die cutting services. Our permanent, hardwall clean room facility offers die cutting for web widths up to 13” with tight tolerances as small as 50 microns.

CFS manufactures custom gaskets from materials such as silicone rubber, EPDM, Poron®, Santoprene®, RN-8011 and Viton®. Our in-house engineering team will work with you to ensure the perfect fit for your custom gasket needs. In addition to custom gasket making capabilities, CFS offers large format cutting and adhesive laminating services. We can easily provide kiss-cutting or split liners for your gaskets requiring an adhesive backing.

Custom Fabricating & Supplies is proud to have achieved the ISO 9001:2015 Certificate. We believe in the continued improvement of our organization, so we may provide our customers with the highest level of service expected from a partner. Our customers have the confidence that CFS is adhering to the systems and procedures that being ISO 9001:2015 certified demands.

Our goal has been the same since day one — to make sure YOU the customer are completely satisfied! We offer our customers excellent service, easy to apply design concepts and the best lead-times in the industry. Our staff is always available to assist you in any way. CFS wants to build partnerships with our customers so your success is our success! We look forward to working with you.

Sincerely, Lori Asik, CEO

CONTENTSNEW at CFS 3-4

Masking Members 5

Vendor Managed 5Inventory

Our Capabilities 6

Industries Served 7

Online Store 8

Caps & Plugs 9

Tapes & Die Cuts 35

Industrial Tapes 53

3M Tapes 61

Protection Products 69

Hooks 71

Elastomer Guide 74

Conversion Chart 75

Index 76

Terms & Conditions 77

Custom Fabricating & Supplies

VARIABLE DATA PRINTING

CUSTOM FABRICATING

& SUPPLIES is authorized

to bid on government

projects. We are JCP certified (0056362)

Cage Code 44K1.

TRIM

3

CLEAN ROOM MANUFACTURINGCFS celebrates a significant production expansion with the addition of their ISO Class 7 (10,000) certified clean room. Inside of the Class 7 clean room is a Delta Mod-Tech rotary die cutting machine – considered the premier converting equipment in the industry – equipped with an inline inkjet printer capable of variable data and barcode printing. “With the medical wearable market increasing at a 30% year over year rate, we saw a need for additional clean room converting capacity,” commented Henry Asik, VP of CFS.

While most often associated with the medical sector, the benefits of clean room die cutting isn’t restricted to only healthcare applications. Clean room manufacturing is used by pharmaceutical, electronic, military and LED lighting industries requiring low particulate, humidity and temperature- controlled die cutting services. “The incorporation of the Delta ModTech with printing capacity in a clean room environment really sets us apart in the traditional die cutting market. We look forward to serving a new customer base with our decades of converting experience,” concluded Asik.

VARIABLE DATA PRINTINGCFS is excited to add variable data printing (VDP) to its product offering. Long known as a premier provider of pressure sensitive adhesives and precision die cutting services, this new capability provides traceability from manufacturing through logistics. The addition of a Domino Wide Array Ink Jet Printing System to our Delta Mod-Tech means custom die cuts can have VDP added in-line.

Examples of printing usage include:1. QR codes, bar codes and consecutive numbering systems

provide traceability from manufacturing through logistics.2. Work instructions for lean manufacturing indicating part location

and usage.3. “Target” lines outline parts to be masked for precise placement.4. Branding! Let your customers see your logo.

NEW AT CFS

TRIM

4

PATENT PENDING VENT PLUGCFS unveiled its Patent Pending Vented Plug design which creates a path for air pressure to escape while simultaneously maintaining a liquid-tight seal. Brian Asik, National Sales Manager for CFS and inventor of this design, explains, “Plugging and/or capping parts that are connected to a large cavity has always been challenging due to the air pressure that builds up during both dry off and cure oven bake cycles.” In many instances, this pressure is great enough to blow the plug or cap off of the part resulting in a masking failure.

To address the problem, CFS developed a two-piece plug design that acts as a one-way vent. The vent allows air to escape as needed while keeping all wash and coating out. “If there’s no air coming out, then the vent seals itself,” says Asik. “It doesn’t leak the way that traditional vented plugs typically can.” The outer part of the design works like a standard plug and can be custom-made to plug or cap any size or geometry.

Recently introduced in an outboard motor coating line, the vent plug reduced application time by 75% and saved 50% on the masking costs. Contact CFS to get your personal masking consultation today!

NEW AT CFS

CHECK OUT THESE OTHER NEW ADDITIONS3M™ Flatback Masking Tape – page 62 3M™ General Use Masking Tape – page 623M™ High Temp Performance Masking Tape

– page 623M™ High Performance Masking Tape – page 653M™ Anodization Tape – page 66Yellow/Black Vinyl Safety Marking Tape – page 49Plotting Tapes – page 47Hollow Silicone Pull Plugs – page 21Silicone Bore Mask Plug Kits – page 21Hanging Threaded Plugs – page 21

SCAN TO WATCH VIDEO OF PLUG IN ACTION!

TRIM

5

When a manufacturer has excess inventory not adding value to the process, the inventory is hurting the company’s balance sheet. Having excess physical inventory on hand increases the need for expensive warehousing space and the risk of obsolescence. Having the bare minimum on hand to sustain production is the delicate balance of supply chain management.

While there are a few different variations of VMI, they all operate under the same principle: by ordering materials only when they are needed, businesses maximize efficiency, minimize costs, reduce stock outs, and increase profits.

BENEFITS OF VMI WITH CFS INCLUDE:• Removal of safety stock• Lower inventory levels• Reduction in purchasing-related admin costs• On-site CFS masking experts• Free delivery

Utilizing a well-implemented VMI system will not only improve your balance sheet but will also cut many other wastes out of the overall process and put you on your way to having a lean inventory. VMI is not a one-size-fits-all system but highly adaptable for many different requirements. Give us a call today to learn how CFS can be your VMI partner.

CHOOSE YOUR LEVEL OF MASKING MEMBERSHIP

VENDOR MANAGED INVENTORY (VMI)

Cross Reference Tool

Masking Tool Finder

Reorder Custom Parts Online**

Instant Quoting Tool

Custom Quotes w/in 24 hours

15% off 3D Printed Parts

Free Replacement Tooling **

Free Set-Up Charges **

Free 3D Prototype**

*The Basic Membership must be activated by CFS before use**Restrictions and limitations apply - please inquire for details

BASIC MEMBERSHIP PREMIUM MEMBERSHIPFREE with Fast Track account* Inquire for

(See pg 8 for details) pricing

TRIM

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com6

Gasket Manufacturing

CFS provides custom non-metallic gaskets, spacers, seals, insulation and shielding pads to top OEMs and their suppliers utilizing sili-cone rubber, EPDM, Neoprene, Poron, Viton, Santoprene, RN-8011, cork, Lexan and many others. Adhesives may be added for easy placement and holding during assembly.

Converting Services

CFS is a 3M™ Preferred Converter. We provide precision slitting, die cutting, rewinding and laminating services for a variety of tapes, rubbers and sponges from 0.0025” to 5” thick. Already have material to be converted? We will work with customer supplied products.

Precision Die Cutting Rotary & Steel Rule Die Cutting

Engineered Solutions

Dieless Knife Cutting

Rapid Prototyping

CFS has invested in a Delta ModTech high speed rotary die cutting machine — state of the art technology — which allows us to tackle high volume, tight tolerance jobs with complex island placements and multi-layer laminations. Inline variable data and barcode printing available.

Clean Room Manufacturing

ISO 7, Class 10,000 Clean Room includes a Delta ModTech precision rotary die cutting machine fitted with an inline inkjet printer capable of variable data and barcode printing. Permanent, hardwall construction with a temperature and humidity-controlled environment.

Rubber Moldings & Extrusions

As a premier custom rubber molding provider, CFS understands that developing new products can be an intimidating process. We offer a true one-time set-up charge for all new molded or extruded parts. Custom masking caps and plugs are available!

In-house capabilities include kiss cutting, split liners, perforations, zoned adhesives, pull tabs, sheeting and kitting of die cuts made from single and double sided adhesive tapes, plastic sheeting, gasket materials, specialty rubbers, cardboard, fish paper and other non-metallic materials.

In addition to decades of in-house experience, you have the support of industry partners like 3M™ to tackle your toughest masking needs with leading edge technologies and materials. Contact us for assistance with your toughest challenges!

“Flash” cutting utilizes digital knife technology and provides multi- dimensional shapes while eliminating cutting dies and tooling costs. Short runs, large diameter parts and rapid prototypes are cost effective; finished dimensions up to 5’ x 10’ and 5” thick.

CFS can produce a prototype in less than 24 hours using your CAD file. Complex gaskets, seals or die cuts can be completed quickly without dies using our Flash machines, 3D printing or our custom plotting capabilities. No CAD file? We can create one for a nominal fee.

OUR CAPABILITIES

TRIM

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 7

Aerospace & Defense

Electronics

Medical

Automotive

LED Lighting

Oil & Gas

Agriculture

Food & Beverage

Metal Finishing

From custom silicone plugs for acid etching airplane wings to die cut pressure sensitive adhesives for attachment of cabin components, we can customize a solution for your specific application. CARC paint masking is a specialty of CFS and we work closely with leading military suppliers.

CFS manufactures die cut components and masking supplies for conformal coating of PCBs and related assemblies during the film application. We have extensive experience with thermal management pads and heat sink die cuts needed for electrical components.

Our ISO 7 clean room provides precision die cutting in a temperature and humidity- controlled environment. Converting services for the medical industry include die-cutting and material slitting. In addition to medical tape converting, CFS produces medical grade rubber molded products for OEMs.

In addition to traditional supplies for automotive paint masking like silicone plugs and polyester tapes, CFS provides high bond tape products replacing heavier screws, welds, and rivets. With our capabilities we can also produce molded rubber parts, non-metallic gaskets and component die cuts for the auto industry.

Thermal Interference Materials are vital components in LED lights, helping manage the heat produced by the diodes. CFS provides custom die-cut, thermally conductive materials and gaskets with pressure sensitive adhesives for easy placement. Die-cut flame barrier materials are available.

CFS has extensive experience developing custom rubber moldings. The oil & gas industry relies on us to provide oilfield rubber parts that can withstand the rigors of the unforgiving environment. Popular CFS products include centralizers, rubber packers, rod guides, gaskets and grommets.

Top farm equipment manufacturers rely on CFS to supply custom adhesive die cuts and molded rubber masking for their wet and powder coat applications to ensure the finishing process does not interfere with threads or other surfaces where it is critical that they remain coating free.

CFS has custom molding capabilities which include food grade silicone used in baking and candy making. We also supply PTFE coated fiberglass tapes and fabrics needed for heat sealing of food packaging. Use of this tape on the heating element prevents sticking of molten plastic/polyethylene.

Our online store provides a wide range of masking supplies for powder coating, e-coating, wet spray, anodizing and plating. We can customize any tape, die cut, cap or plug. Need a size that is not listed? Custom tape and die cuts can often be produced within 24 hours! We can engineer caps and plugs for all your masking needs.

INDUSTRIES SERVED

TRIM

WE HAVE YOU COVEREDFrom Silicone Caps & Plugs to Tapes & Die-Cuts, we have you covered! Top OEMs and industrial

coaters rely on CFS to provide masking solutions for metal finishing’s most complex needs.

WE ARE A 3MTM PREFERRED CONVERTER with over 40 years of experience and are experts in surface protection

applications utilizing pressure sensitive adhesives.

Custom Fabricating & Supplieswww.customfabricate.com

SAME DAY SHIPPING on all Stock Orders

ARE YOU ON THE

BENEFITS OF A FAST TRACK ONLINE ACCOUNT

• Order standard products 24/7 • View all previous company

orders • View and print invoices • Track shipments • View and pay open balances

(for customers with terms) • Save favorites and access quick order

form for a lightning checkout • View previous payments on

account balances • Basic Masking Membership

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 9

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

Caps and plugs info... Tab cover

WE HAVE YOU COVEREDCFS is a preferred masking supplier to top OEMs and coaters. Our large stock of caps and plugs

means most orders ship same day. We can design custom silicone, EPDM and Vinyl caps to mask

threads, pems, voids and holes to ensure efficient and clean finishes after powder coating, e-coating

anodizing and plating. It is our experience that many customers’ masking fails due to incorrect

part sizing. Our online Fast Track Membership provides access to our masking tool finder which helps

you select the correct CFS masking solution. Contact us to set up your FREE account!

Silicone Caps ................................................................ 10-13Self Fusing Silicone Tape ..................................................13Silicone Plugs ............................................................... 14-25Silicone Starter Kits ............................................................26Silicone Tubing ...................................................................27Solid Silicone Cord ............................................................28Silicone Sheeting ...............................................................29EPDM Plug Kits ...................................................................29EPDM Caps .........................................................................30EPDM Plugs .................................................................. 31-32Vinyl Caps ...........................................................................33Self Threading Plugs ..........................................................34

CAPS & PLUGS

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com10

CA

PS &

PLU

GS

SILICONE CAPS

SC020-0500 0.020 0.120 0.500 5.08 3.05 12.70 Red 1000 SC035-0500 0.035 0.135 0.500 0.88 3.43 12.70 White 1000 SC040 0.040 0.140 0.750 1.01 3.56 19.05 Blue 1000 SC062 0.062 0.162 1.000 1.57 4.11 25.40 Green 1000 SC070 0.070 0.170 1.000 1.78 4.32 25.40 Clear 1000 2-56 M2 SC080-0750 0.080 0.200 0.750 2.03 5.08 19.05 Clear 1000 SC093-0500 0.093 0.213 0.500 2.40 5.41 12.70 Gray 1000 3-48 SC093 0.093 0.195 0.750 2.40 4.95 19.05 Pink 1000 SC093-1000 0.093 0.213 1.000 2.40 5.41 25.40 White 1000 SC100-0250 0.100 0.225 0.250 2.54 5.72 6.35 Dk. Red 1000 SC100-0500 0.100 0.200 0.500 2.54 5.08 12.70 Dk. Blue 1000 4-40 M3 SC100 0.100 0.200 1.000 2.54 5.08 25.40 Lt. Gray 1000 4-40 M3 SC109-0500 0.109 0.215 0.500 2.77 5.46 12.70 Yellow 1000 5-40 SC109 0.109 0.215 0.750 2.77 5.46 19.05 Gray 1000 5-40 SC109-1000 0.109 0.215 1.000 2.77 5.46 25.40 Clear 1000 5-40 SC125-0500 0.125 0.250 0.500 3.17 6.35 12.70 Lt. Blue 1000 6-32 6-36 SC125 0.125 0.250 1.000 3.17 6.35 25.40 Black 1000 6-32 6-36 SC125-1500 0.125 0.250 1.500 3.17 6.35 38.10 Clear 1000 6-32 6-36 SC140-0500 0.140 0.265 0.500 3.55 6.73 12.70 Clear 1000 SC140 0.140 0.265 1.000 3.55 6.73 25.40 White 1000 SC140-1500 0.140 0.200 1.500 3.55 5.08 38.10 Clear 1000 SC148-0500 0.148 0.268 0.500 3.76 6.81 12.70 Dk. Blue 1000 M4 SC148-0750 0.148 0.268 0.750 3.76 6.81 19.05 Gray 1000 M4 SC148 0.148 0.268 1.000 3.76 6.81 25.40 Pink 1000 M4 SC156-0500 0.156 0.280 0.500 4.00 7.11 12.70 Lt. Gray 1000 8-32 8-36 SC156 0.156 0.280 1.000 4.00 7.11 25.40 Yellow 1000 8-32 8-36 SC156-1500 0.156 0.280 1.500 4.00 7.11 38.10 Clear 1000 8-32 8-36 SC172-0500 0.172 0.276 0.500 4.36 7.01 12.70 Gray 1000 10-24 10-32 SC172 0.172 0.276 1.000 4.36 7.01 25.40 Lt. Blue 1000 10-24 10-32 SC172-1500 0.172 0.276 1.500 4.36 7.01 38.10 Clear 1000 10-24 10-32 SC180 0.180 0.280 1.000 4.57 7.11 25.40 Black 1000 M5 SC187-0500 0.187 0.315 0.500 4.75 8.00 12.70 White 1000 12-24 12-28 SC187 0.187 0.315 1.000 4.75 8.00 25.40 Clear 1000 12-24 12-28 SC187-0750 0.187 0.315 0.750 4.74 8.00 19.05 Clear 1000 12-24 12-28 SC187-1500 0.187 0.315 1.500 4.75 8.00 38.10 Clear 1000 12-24 12-28 SC197-0500 0.197 0.317 0.500 5.00 8.05 12.70 Clear 500 SC197 0.197 0.317 1.000 5.00 8.05 25.40 Clear 500 SC218 0.218 0.338 1.000 5.53 8.59 25.40 Yellow 500 SC223-0500 0.223 0.345 0.500 5.66 8.76 12.70 Dk. Blue 500 M6 SC223-0750 0.223 0.345 0.750 5.66 8.76 19.05 White 500 M6 SC223-1000 0.223 0.345 1.000 5.66 8.76 25.40 Black 500 M6 SC223 0.223 0.345 1.500 5.66 8.76 38.10 Pink 500 M6 SC234-0500 0.234 0.360 0.500 5.94 9.14 12.70 White 500 1/4 20 SC234-0750 0.234 0.360 0.750 5.94 9.14 19.05 Clear 500 1/4 20 SC234 0.234 0.360 1.000 5.94 9.14 25.40 Lt. Green 500 1/4 20 SC234-1500 0.234 0.360 1.500 5.94 9.14 38.10 Yellow 500 1/4 20 SC250 0.250 0.370 1.000 6.35 9.40 25.40 Gray 500 SC250-1500 0.250 0.370 1.500 6.35 9.40 38.10 Clear 500 SC260 0.260 0.380 1.000 6.60 9.65 25.40 Clear 500 SC281-0500 0.281 0.341 0.500 7.14 8.66 12.70 Clear 500 SC281 0.281 0.400 1.000 7.14 10.16 25.40 Lt. Blue 500 5/16 18 SC281-2000 0.281 0.400 2.000 7.14 10.16 50.80 Clear 500 5/16 18 SC295-0500 0.295 0.415 0.500 7.50 10.54 12.70 Black 500 M8 SC295-0750 0.295 0.355 0.750 7.50 9.02 19.05 Clear 500 SC295-1000 0.295 0.415 1.000 7.50 10.54 25.40 Lt. Gray 500 M8 SC295 0.295 0.415 1.500 7.50 10.54 38.10 Clear 500 M8 SC312-0500 0.312 0.440 0.500 7.92 11.18 12.70 Yellow 500

PART ID OD LONG ID OD LONG

COLOR QTY/BAG STUD SIZE NUMBER STANDARD (INCHES) METRIC (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Recommended for masking studs, pems and tube ends• Flexible material allows cap to conform to irregular shapes• May be inverted as a plug• Rounded top makes insertion into holes easier • Color coded for easy identification & reusable • Starter Kit available (see page 23)• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 11

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

SC312 0.312 0.440 1.000 7.92 11.18 25.40 White 500 SC312-1500 0.312 0.440 1.500 7.92 11.18 38.10 Pink 500 SC312-2000 0.312 0.440 2.000 7.92 11.18 50.80 Clear 500 SC340 0.340 0.460 1.000 8.63 11.68 25.40 Black 500 SC340-2000 0.340 0.460 2.000 8.63 11.68 50.80 Clear 500 SC355-0500 0.355 0.475 0.500 9.02 12.07 12.70 Clear 500 SC355-0710 0.355 0.475 0.710 9.02 12.07 18.03 Clear 500 SC355 0.355 0.475 1.500 9.02 12.07 38.10 Lt. Green 500 3/8-16 SC366 0.366 0.486 1.000 9.29 12.34 25.40 Black 500 M10 SC366-1500 0.366 0.486 1.500 9.29 12.34 38.10 Red 500 SC375-0750 0.375 0.495 0.750 9.52 12.57 19.05 Pink 500 M10 SC375 0.375 0.495 1.000 9.52 12.57 25.40 Yellow 500 M10 SC375-1500 0.375 0.495 1.500 9.52 12.57 38.10 Gray 500 M10 SC406 0.406 0.531 1.000 10.31 13.49 25.40 Lt. Blue 500 7/16-14 SC406-1500 0.406 0.466 1.500 10.31 11.84 38.10 Clear 500 SC437 0.437 0.565 1.000 11.10 14.35 25.40 Black 500 SC456-0500 0.456 0.576 0.500 11.58 14.63 12.70 Clear 500 M12 SC456-1000 0.456 0.576 1.000 11.58 14.63 25.40 Pink 500 M12 SC456 0.456 0.576 1.500 11.58 14.63 38.10 Clear 500 M12 SC468 0.468 0.593 1.000 11.88 15.06 25.40 White 500 SC475-4000 0.475 0.593 4.000 12.06 15.06 101.60 Clear 250 SC480 0.480 0.605 1.500 12.19 15.37 38.10 Pink 500 1/2-13 SC500 0.500 0.625 1.500 12.70 15.88 38.10 Lt. Green 500 SC500-3000 0.500 0.625 3.000 12.70 15.88 76.20 Clear 250 SC535 0.535 0.635 1.500 13.59 16.13 38.10 Yellow 250 M14 SC535-3000 0.535 0.655 3.000 13.59 16.64 76.20 Yellow 250 M14 SC562 0.562 0.682 1.500 14.27 17.32 38.10 Lt. Blue 250 M15 SC600 0.600 0.708 1.500 15.24 17.98 38.10 Black 250 M16 SC625 0.625 0.750 1.500 15.87 19.05 38.10 Clear 250 SC625-2500 0.625 0.750 2.500 15.87 19.05 63.50 White 250 SC687 0.687 0.812 1.500 17.45 20.62 38.10 Pink 250 SC687-2500 0.687 0.812 2.500 17.45 20.62 63.50 White 250 SC730 0.730 0.855 1.500 18.54 21.72 38.10 Lt. Green 250 M19 SC750 0.750 0.875 1.500 19.05 22.23 38.10 Yellow 250 M20 SC750-3500 0.750 0.875 3.500 19.05 22.23 88.90 Gray 250 M20 SC780 0.780 0.905 1.500 19.81 22.99 38.10 Lt. Blue 250 SC812 0.812 0.937 1.500 20.62 23.80 38.10 Black 250 SC875 0.875 1.000 1.500 22.22 25.40 38.10 Clear 250 SC875-2000 0.875 1.000 2.000 22.23 25.40 50.80 Yellow 250 SC937 0.937 1.062 1.500 23.80 26.97 38.10 White 250 SC970 0.970 1.095 1.500 24.63 27.81 38.10 Pink 250 SC970-4000 0.970 1.095 4.000 24.63 27.81 101.60 Clear 250 SC1000 1.000 1.125 1.500 24.53 28.58 38.10 Lt. Green 250 SC1000-2000 1.000 1.120 2.000 24.53 30.48 50.80 Yellow 250 SC1062 1.062 1.187 2.000 27.00 30.15 50.80 Gray 100 SC1125 1.125 1.250 1.500 28.57 31.75 38.10 Lt. Blue 100 SC1187 1.187 1.312 1.500 30.15 33.32 38.10 Black 100 SC1250 1.250 1.375 1.500 31.75 34.91 38.10 Clear 100 SC1350 1.350 1.475 1.500 34.29 37.47 38.10 White 100 SC1350-1750 1.350 1.475 1.750 34.29 37.47 44.45 Clear 100 SC1380 1.380 1.500 1.000 35.05 38.10 25.40 Clear 100 SC1380-1500 1.380 1.500 1.500 35.05 38.10 38.10 Clear 100 SC1500 1.500 1.625 1.000 38.10 41.28 25.40 Pink 100 SC1500-1750 1.500 1.625 1.750 38.10 41.15 44.45 Lt. Green 100 SC1500-2000 1.500 1.625 2.000 38.10 41.28 50.80 Clear 100 SC1625 1.625 1.745 2.000 41.27 44.32 50.80 Clear 100 SC1750 1.750 1.875 2.000 44.45 47.63 50.80 Yellow 100 SC1875 1.875 2.000 2.000 47.62 50.80 50.80 Gray 100 SC2000 2.000 2.125 2.000 50.80 53.98 50.80 Lt. Blue 100

PART ID OD LONG ID OD LONG

COLOR QTY/BAG STUD SIZE NUMBER STANDARD (INCHES) METRIC (MILLIMETERS)

SILICONE CAPSSize Selection Tips: 1. Cap ID should be approximately .02” smaller than

thread or pem to be masked 2. For easier removal, allow extra length3. If using as a plug, please contact us for samples and

sizing suggestions

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com12

CA

PS &

PLU

GS

SILICONE FLANGE CAPS

FC106-0472 0.106 0.244 0.472 1.000 2.69 6.20 11.99 25.40 Lt. Green 500 FC146-0472 0.146 0.264 0.472 1.000 3.71 6.71 11.99 25.40 Pink 500 FC100-0500 0.100 0.225 0.500 1.000 2.54 5.72 12.70 25.40 Clear 500 FC125-0500 0.125 0.260 0.500 1.000 3.18 6.60 12.70 25.40 Clear 500 FC140-0500 0.140 0.320 0.500 1.000 3.56 8.13 12.70 25.40 Clear 500 FC156-0500 0.156 0.320 0.500 1.000 3.96 8.13 12.70 25.40 Clear 500 FC172-0500 0.172 0.320 0.500 1.000 4.37 8.13 12.70 25.40 Clear 500 FC240-0500 0.240 0.360 0.500 1.000 6.10 9.14 12.70 25.40 Rusty Red 250 FC295-0500 0.295 0.415 0.500 1.000 7.49 10.54 12.70 25.40 Clear 500 FC181-0591 0.181 0.323 0.591 1.000 4.60 8.20 15.01 25.40 Clear 500 FC220-0591 0.220 0.340 0.591 1.000 5.59 8.64 15.01 25.40 Red 500 FC295-0700 0.295 0.415 0.700 1.000 7.49 10.54 17.78 25.40 Black 250 FC220-0787 0.220 0.340 0.787 1.000 5.59 8.64 19.99 25.40 Red 500 FC375-0825 0.375 0.512 0.825 1.500 9.53 13.00 20.96 38.10 Clear 250 FC453-0984 0.453 0.657 0.984 1.500 11.51 16.69 24.99 38.10 Clear 250 FC500-1000 0.500 0.625 1.000 1.000 12.70 15.88 25.40 25.40 Blue 250 FC615-1180 0.615 0.735 1.180 1.500 15.62 18.67 29.97 38.10 Red 250 FC750-1500 0.750 0.870 1.250 1.500 19.05 22.10 31.75 38.10 Purple 250 FC780-1475 0.780 0.900 1.475 1.500 19.81 22.86 37.47 38.10 Gray 100

SRC-1 0.248 0.394 0.030 6.30 10.01 0.76 Clear 1000 SRC-2 0.248 0.456 0.030 6.30 11.58 0.76 Red 1000 SRC-3 0.470 0.374 0.040 11.94 9.50 1.02 Clear 1000 SRC-4 0.460 0.280 0.035 11.68 7.11 0.89 Yellow 1000 SRC-5 0.490 0.687 0.047 12.45 17.45 1.19 Pink 1000

PART ID OD FLANGE LENGTH ID OD FLANGE LENGTH

COLOR QTY/BAG NUMBER

PART A B C A B C

COLOR QTY/BAG NUMBER

STANDARD (INCHES)

STANDARD (INCHES)

METRIC (MILLIMETERS)

METRIC (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Recommended for masking studs and pems with a perimeter for grounding• Flexible material allows cap to conform to irregular shapes• May be inverted as a plug• Top of cap is rounded, not flat• Color coded for easy identification & reusable • Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Recommended for masking bus bar terminals and grounding

tabs on electrical enclosures• Tapered collar helps with fine line masking• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE RECTANGULAR CAPS

SAME DAY SHIPPING on all Stock Orders

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 13

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

OVERSIZED SILICONE CAPS

SELF FUSING SILICONE TAPE

OSC0125-2000 0.125 2.000 3.18 50.80 500 OSC0156-2000 0.156 2.000 3.96 50.80 500 OSC0157-1180 0.157 1.180 4.00 29.97 500 OSC0180-2000 0.180 2.000 4.57 50.80 500 OSC0187-1377 0.187 1.377 4.75 34.98 500 OSC0197-1180 0.197 1.180 5.00 29.97 500 OSC0234-2000 0.234 2.000 5.94 50.80 500 OSC0236-1180 0.236 1.180 5.99 29.97 500 OSC0255-0910 0.255 0.910 6.48 23.11 500 OSC0255-1180 0.255 1.180 6.48 29.97 500 OSC0275-1180 0.275 1.180 6.99 29.97 500 OSC0294-1330 0.294 1.330 7.47 33.78 500 OSC0315-0974 0.315 0.974 8.00 24.74 500 OSC0315-1180 0.315 1.180 8.00 29.97 500 OSC0355-1500 0.355 1.500 9.02 38.10 250 OSC0375-1421 0.375 1.421 9.53 36.09 250 OSC0394-1180 0.394 1.180 10.01 29.97 500 OSC0433-1180 0.433 1.180 11.00 29.97 250 OSC0438-0950 0.438 0.950 11.13 24.13 250 OSC0451-1215 0.451 1.215 11.46 30.86 250 OSC0451-2000 0.451 2.000 11.46 50.80 250 OSC0485-1013 0.485 1.013 12.32 25.73 250 OSC0485-1600 0.485 1.600 12.32 40.64 100 OSC0492-1180 0.492 1.180 12.50 29.97 100 OSC0531-1180 0.531 1.180 13.49 29.97 100 OSC0587-0374 0.587 0.374 14.91 9.50 100 OSC0608-1180 0.608 1.180 15.44 29.97 100 OSC0622-1180 0.622 1.180 15.81 29.97 100 OSC0622-1575 0.622 1.575 15.80 40.01 100 OSC0687-1180 0.687 1.180 17.45 29.97 100 OSC0750-2000 0.750 2.000 19.05 50.80 100 OSC1288-4128 1.288 4.128 32.72 104.85 50

SAT-1000 .020 0.51 1.00 25.4 36 ft SAT-1500 .020 0.51 1.50 38.1 36 ft SAT-2000 .020 0.51 2.00 50.8 36 ft SAT-3000 .020 0.51 3.00 76.2 36 ft

PART NUMBER ID LENGTH ID LENGTH

QTY/BOX

PART NUMBER THICKNESS THICKNESS

WIDTH WIDTH ROLL LENGTH (INCHES) (MILLIMETERS)

STANDARD (INCHES)

DIMENSIONS (INCHES)

METRIC (MILLIMETERS)

DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Ideal for longer or wider threaded and non-threaded studs • Easier to place and remove than standard caps• Internal ridge provides tight seal• Can be vented to eliminate movement from pressure build-up (do not immerse if vented)• Reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Great alternative to a large custom cap• Self-Adhesive - waterproof seal is permanent after 24 hours• Extremely pliable and conformable• Used primarily in Powder Coating and E-Coating

Size Selection Tip: Select ID at least 10% smaller than OD of part being masked.

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com14

CA

PS &

PLU

GS

SILICONE TAPERED PLUGS

STP062 0.016 0.062 0.625 0.41 1.57 15.88 Blue 1000 STP078 0.020 0.078 0.750 0.51 1.98 19.05 Red 1000 STP98 0.015 0.080 2.000 0.38 2.03 50.80 Clear 1000 STP99 0.031 0.125 0.625 0.79 3.18 15.88 Clear 1000 STP100S 0.031 0.100 1.000 0.79 2.54 25.40 Yellow 1000 STP100 0.062 0.125 0.625 1.57 3.18 15.88 Lt. Green 1000 STP101 0.062 0.187 0.625 1.57 4.75 15.88 Pink 1000 STP101XL 0.062 0.187 0.750 1.57 4.75 19.05 Dk. Green 1000 STP188 0.047 0.188 2.200 1.19 4.78 55.88 Clear 500 STP197 0.047 0.197 1.100 1.19 5.00 27.94 Green 500 STP200 0.062 0.200 0.750 1.57 5.08 19.05 Blue 1000 STP216 0.047 0.216 1.500 1.19 5.49 38.10 Pink 500 STP102 0.125 0.250 0.750 3.18 6.35 19.05 Black 1000 STP102XL 0.125 0.250 1.000 3.18 6.35 25.40 Yellow 1000 STP276 0.118 0.276 0.787 3.00 7.01 19.99 Blue 500 STP280 0.065 0.280 1.500 1.65 7.11 38.61 Red 1000 STP103 0.187 0.343 0.625 4.75 8.71 15.88 Red 1000 STP103XL 0.187 0.343 1.000 4.75 8.71 25.40 Clear 1000 STP104 0.250 0.375 0.750 6.35 9.53 19.05 Yellow 100 STP104XL 0.250 0.437 1.000 6.35 11.10 25.40 Red 1000 STP105 0.250 0.375 0.500 6.35 9.53 12.70 White 100 STP375XL 0.125 0.375 1.250 3.18 9.53 31.75 Clear 500 STP394 0.197 0.394 1.890 5.00 10.01 48.01 White 500 STP433 0.315 0.433 1.063 8.00 10.99 27.00 Green 500 STP106 0.343 0.437 0.687 8.71 11.10 17.45 Blue 100 STP500S 0.312 0.500 0.813 7.92 12.70 20.65 Brown 100 STP000 0.343 0.468 0.813 8.71 11.89 20.65 Clear 100 STP000XL 0.312 0.500 1.000 7.92 12.70 25.40 White 100 STP500XL 0.125 0.500 2.000 3.18 12.70 50.80 Clear 500 STP107 0.375 0.562 1.000 9.53 14.27 25.40 Red 100 STP107XL 0.313 0.562 1.125 7.95 14.27 28.58 Rusty Red 500 STP00 0.406 0.593 1.000 10.31 15.06 25.40 Purple 100 STP108 0.437 0.625 0.875 11.10 15.88 22.23 Lt. Green 100 STP669 0.512 0.669 1.000 13.00 16.99 25.40 Blue 100 STP0 0.500 0.656 1.000 12.70 16.66 25.40 Pink 100 STP108XL 0.437 0.687 1.000 11.10 17.45 25.40 Clear 250 STP1 0.562 0.750 1.000 14.27 19.05 25.40 Black 100 STP2 0.625 0.781 1.000 15.88 19.84 25.40 Red 100 STP827 0.663 0.827 0.984 16.84 21.00 24.99 Rusty Red 100 STP3 0.718 0.937 1.000 18.24 23.80 25.40 Yellow 100 STP4 0.781 1.000 1.000 19.84 25.40 25.40 Clear 100 STP5 0.906 1.062 1.000 23.01 26.97 25.40 Lt. Gray 100 STP5.5 0.937 1.100 1.000 23.80 27.94 25.40 Clear 100 STP6 1.031 1.250 1.000 26.19 31.75 25.40 Dk. Green 100 STP6.5 1.062 1.312 1.000 26.97 33.32 25.40 Clear 100 STP7 1.187 1.437 1.000 30.15 36.50 25.40 Lt. Blue 50 STP7.5 1.250 1.531 1.000 31.75 38.89 25.40 Clear 50 STP8 1.312 1.625 1.000 33.32 41.28 25.40 Green 25 STP8.5 1.406 1.687 1.000 35.71 42.85 25.40 Clear 25 STP9 1.468 1.750 1.000 37.29 44.45 25.40 Red 25 STP9.5 1.500 1.812 1.000 38.10 46.02 25.40 Clear 25 STP10 1.625 1.969 1.000 41.28 50.01 25.40 Green 25 STP10.5 1.750 2.062 1.000 44.45 52.37 25.40 Clear 25 STP11 1.875 2.203 1.000 47.63 55.96 25.40 Dk. Blue 25 STP11.5 1.968 2.468 1.000 49.99 62.69 25.40 Clear 25 STP12 2.125 2.500 1.000 53.98 63.50 25.40 Red 25 STP13 2.281 2.687 1.000 71.37 68.25 25.40 Green 10 STP13.5 2.437 2.968 1.375 61.90 75.39 34.93 Clear 10 STP14 3.000 3.500 1.500 76.20 88.90 38.10 Clear each STP15 3.250 4.000 1.500 82.55 101.60 38.10 Clear each STP16 3.500 5.000 2.000 88.90 127.00 50.80 Clear each

PART A B C A B C

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• For use in both threaded and non-threaded holes - compresses for a tight fit• Color coded for easy identification & reusable• Tapered design fits a variety of hole diameters - most often used for blind holes• Starter Kit available (see page 23)• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 15

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

SILICONE HOLLOW TAPERED PLUGS

HTP5-04 0.906 1.063 1.000 0.406 0.750 23.01 27.00 25.40 10.31 19.05 Lt. Green 100 HTP6-04 1.031 1.250 1.000 0.531 0.750 26.19 31.75 25.40 13.49 19.05 Dk. Green 100 HTP7-04 1.187 1.437 1.000 0.531 0.750 30.15 36.50 25.40 13.49 19.05 Dk. Blue 100 HTP8-04 1.313 1.625 1.000 0.813 0.750 33.35 41.28 25.40 20.65 19.05 Lt. Blue 100 HTP9-04 1.469 1.750 1.000 0.969 0.750 37.31 44.45 25.40 24.61 19.05 Red 100 HTP9.5-04 1.500 1.812 1.000 1.000 0.750 38.10 46.02 25.40 25.40 19.05 Green 50 HTP10-04 1.625 1.969 1.000 1.125 0.750 41.28 50.01 25.40 28.58 19.05 Clear 50 HTP11-04 1.875 2.203 1.000 1.375 0.750 47.63 55.96 25.40 34.93 19.05 Dk. Blue 50 HTP11.5-04 2.000 2.469 1.000 1.250 0.625 50.80 62.71 25.40 31.75 15.88 Dk. Green 50 HTP12-04 2.126 2.500 1.000 1.375 0.625 54.00 63.50 25.40 34.93 15.88 Red 50 HTP13-04 2.281 2.687 1.000 1.531 0.625 57.94 68.25 25.40 38.89 15.88 Lt. Blue 50 HTP13.5-04 2.437 2.953 1.375 1.687 1.000 61.90 75.01 34.93 42.85 25.40 Purple 50 HTP13.75-04 2.677 3.228 1.500 1.677 1.000 68.00 81.99 38.10 42.60 25.40 Lt. Green 10 HTP14-04 3.000 3.500 1.500 2.000 1.000 76.20 88.90 38.10 50.80 25.40 White 10 HTP14.5-04 2.953 3.543 1.535 2.450 1.125 75.01 89.99 38.99 62.23 28.58 Gray 10 HTP15-04 3.250 4.000 1.500 2.250 1.000 82.55 101.60 38.10 57.15 25.40 Red 10 HTP16-04 3.500 5.000 2.000 2.500 1.500 88.90 127.00 50.80 63.50 38.10 Clear 5

PART A B C D E A B C D E

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Hollow plug offers a more economical option for masking

large, blind holes• For use in both threaded and non-threaded holes - compresses for a tight fit• Tapered design fits a variety of hole diameters• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE TAPERED PLUGSWITH HANDLES

STP101H 0.062 0.187 0.625 1.000 1.57 4.75 15.88 25.40 Pink 1000 STP102H 0.125 0.250 0.750 1.250 3.18 6.35 19.05 31.75 Black 1000 STP103H 0.187 0.343 0.625 1.130 4.75 8.71 15.88 28.70 Red 1000 STP104H 0.250 0.375 0.750 1.250 6.35 9.53 19.05 31.75 Yellow 100 STP105H 0.250 0.375 0.500 1.000 6.35 9.53 12.70 25.40 White 100 STP00H 0.406 0.593 1.000 1.750 10.31 15.06 25.40 44.45 Purple 100 STP108H 0.437 0.625 0.875 1.625 11.10 15.88 22.23 41.28 Lt. Green 100 STP0H 0.500 0.656 1.000 1.750 12.70 16.66 25.40 44.45 Pink 100 STP2H 0.625 0.781 1.000 1.750 15.88 19.84 25.40 44.45 Red 100 STP3H 0.718 0.937 1.000 1.750 18.24 23.80 25.40 44.45 Yellow 100 STP4H 0.750 1.000 1.000 1.750 19.05 25.40 25.40 44.45 Clear 100 STP6H 1.031 1.250 1.000 1.750 26.19 31.75 25.40 44.45 Dk. Green 100

PART A B C D A B C D

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Our standard tapered plug with a molded handle for easy insertion and removal• For use in both threaded and non-threaded holes - compresses for a tight fit• Most often used for blind holes• Tapered design fits a variety of hole diameters• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com16

CA

PS &

PLU

GS

TSP-0311 0.311 0.628 0.880 7.90 15.95 22.35 500 TSP-0465 0.465 0.700 1.000 11.81 17.78 25.40 500 TSP-0500 0.500 0.882 1.042 12.70 22.40 26.47 500 TSP-0539 0.539 0.882 1.085 13.69 22.40 27.56 250 TSP-0673 0.673 1.017 1.150 17.09 25.83 29.21 250 TSP-0827 0.827 0.900 1.220 21.01 22.86 30.99 100 TSP-1158 1.158 1.465 1.465 29.41 37.21 37.22 100 TSP-1.34 1.340 1.580 1.180 34.04 40.13 29.97 100 TSP-1.340 1.340 1.573 1.195 34.04 39.95 30.35 100 TSP-1349 1.349 1.700 1.600 34.26 43.18 40.64 100 TSP-1854 1.854 2.200 1.618 47.09 55.88 41.10 50

PART OD FLANGE LENGTH OD FLANGE LENGTH

QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Designed to plug tube and pipe ends• Reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE TUBE INSERT PLUGS

SILICONE THREAD MASK

STM-M4 0.141 0.236 0.859 0.167 3.58 5.99 21.82 4.24 Pink 1000 STM-M5 0.180 0.219 0.817 0.205 4.57 5.56 20.75 5.21 Purple 1000 STM-M6 0.208 0.197 0.551 0.248 5.28 5.00 14.00 6.30 Clear 500 STM-218 0.218 0.200 0.450 0.260 5.54 5.08 11.43 6.60 Yellow 500 STM-278 0.278 0.200 0.500 0.320 7.06 5.08 12.70 8.13 Light Green 500 STM-M8 0.283 0.197 0.482 0.331 7.19 5.00 12.24 8.41 Dark Blue 500 STM-336 0.336 0.250 0.600 0.385 8.53 6.35 15.24 9.78 White 500 STM-M10 0.358 0.276 0.630 0.409 9.09 7.01 16.00 10.39 Pink 250 STM-392 0.392 0.350 0.750 0.510 9.96 8.89 19.05 12.95 Pink 250 STM-M12 0.426 0.346 0.792 0.489 10.82 8.79 20.12 12.42 Red 250 STM-451 0.451 0.350 0.750 0.510 11.46 8.89 19.05 12.95 Clear 250 STM-462 0.462 0.304 0.865 0.547 11.73 7.72 21.97 13.89 Blue 250 STM-M14 0.477 0.420 0.866 0.549 12.11 10.67 22.00 13.94 Gray 250 STM-M16 0.583 0.433 0.906 0.654 14.81 11.00 23.01 16.61 Light Green 100 STM-M20 0.724 0.512 1.122 0.811 18.39 13.00 28.50 20.60 Yellow 100 STM-840 0.840 0.594 1.302 0.941 21.34 15.09 33.07 23.90 Clear 250

PART OD D L FLANGE OD D L FLANGE

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• For use in blind, threaded holes• Designed to mask lead-in thread chamfers• Handle aids in placement and removal• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 17

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

SWP-380 0.250 0.096 0.128 6.35 2.44 3.25 Yellow 1000 SWP-103 0.250 0.103 0.130 6.35 2.62 3.30 Yellow 1000 SWP-M3 0.276 0.110 0.146 6.97 2.79 3.71 Gray 1000 SWP-312A 0.312 0.130 0.180 7.92 3.30 4.57 Blue 1000 SWP-400 0.312 0.134 0.157 7.92 3.40 3.99 Black 1000 SWP-312 0.312 0.155 0.238 7.92 3.94 6.05 Black 1000 SWP-M4 0.354 0.142 0.185 8.99 3.61 4.70 Pink 1000 SWP-405 0.319 0.142 0.252 8.10 3.15 6.40 Clear 1000 SWP-375 0.375 0.180 0.185 9.53 4.57 5.08 Pink 1000 SWP-412 0.375 0.198 0.130 9.53 5.03 6.96 Yellow 1000 SWP-223 0.375 0.275 0.375 9.53 6.99 9.53 Clear 500 SWP-233 0.375 0.275 0.375 9.53 6.99 9.53 Clear 1000 SWP-410 0.380 0.137 0.160 9.65 3.48 4.06 Pink 1000 SWP-M5 0.394 0.177 0.224 10.01 4.50 5.69 Clear 1000 SWP-M6 0.492 0.209 0.264 12.50 5.31 6.71 Red 500 SWP-56 0.500 0.130 0.375 12.70 3.30 9.53 Blue 250 SWP-57 0.500 0.130 0.394 12.70 3.30 10.01 Red 250 SWP-155 0.500 0.155 0.390 12.70 3.94 9.91 Clear 250 SWP-500 0.500 0.180 0.200 12.70 4.57 5.08 White 500 SWP-275 0.500 0.275 0.375 12.70 6.99 9.53 Clear 500 SWP-75 0.500 0.375 0.455 12.70 9.53 11.56 Black 500 SWP-415 0.502 0.127 0.186 12.75 3.23 4.72 Lt. Gray 1000 SWP-420 0.502 0.244 0.257 12.75 6.20 6.53 Dk. Blue 500 SWP-440 0.625 0.127 0.256 15.88 3.23 6.50 Yellow 500 SWP-M8 0.669 0.280 0.343 16.99 7.11 8.71 Black 500 SWP-576 0.787 0.551 0.689 19.99 14.00 17.50 Clear 250 SWP-M10 0.827 0.378 0.421 21.01 9.60 10.69 Yellow 250 SWP-866 0.866 0.375 0.455 22.00 9.53 11.56 White 250 SWP-M12 0.945 0.429 0.500 24.00 10.90 12.70 Clear 250 SWP-1180 1.180 0.265 0.765 29.97 6.73 19.43 Clear 100 SWP-1375 1.375 0.265 0.765 34.93 6.73 19.44 Clear 100

PART A B C A B C

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• For use in both threaded and non-threaded holes where a grounding area is needed• Compress for a tight fit• Can be used for both blind and through holes• Dual-tapered design fits a variety of hole diameters• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE WASHER PLUGS

SILICONE STEP PLUGS

SSP-M3 0.275 0.120 0.095 0.275 0.515 6.99 3.05 2.41 6.99 13.08 Lt. Blue 500 SSP-M4 0.315 0.200 0.115 0.315 0.550 8.00 5.08 2.92 8.00 13.97 Lt. Green 500 SSP-M5 0.355 0.240 0.155 0.355 0.630 9.02 6.10 3.94 9.02 16.00 Purple 500 SSP-M6 0.400 0.255 0.190 0.400 0.695 10.16 6.48 4.83 10.16 17.65 Black 250 SSP-M8 0.495 0.327 0.235 0.400 0.685 12.57 8.31 5.97 10.16 17.40 White 250

PART A B C D E A B C D E

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• For use in threaded or non-threaded blind or through holes• Masks lead-in threads and grounding areas• Flange aids in placement and removal• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com18

CA

PS &

PLU

GS

SILICONE FLANGE PLUGS

SFC-M8 0.290 0.472 0.177 1.65 0.538 7.37 11.99 4.50 41.91 13.67 Yellow 250 SFC-M10 0.343 0.575 0.275 1.85 0.472 8.71 14.61 6.99 46.99 11.99 Pink 250 SFC-219 0.343 0.589 0.219 1.10 0.413 8.71 14.96 5.56 27.94 10.49 Clear 250 SFC-M12 0.421 0.622 0.315 2.00 0.551 10.69 15.80 8.00 50.80 14.00 Clear 250 SFC-M14 0.539 0.709 0.417 2.52 0.591 13.69 18.01 10.59 64.01 15.01 Gray 250

PART A B C D E A B C D E

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• For use in threaded or non-threaded blind or through holes• Masks lead-in threads• May be used to cap long studs• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE TAPERED FLANGE PLUGSPRODUCT FEATURES• Temperature Rating: 600°F/315°C• For use in threaded or non-threaded blind or through holes• Masks a grounding area• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

TFP0330 0.492 0.248 0.906 0.130 12.50 6.30 23.01 3.30 Clear 200 TFP0330S 0.375 0.248 0.906 0.130 9.53 6.30 23.01 3.30 Blue 200 TFP0330-TF 0.492 0.248 0.906 0.130 12.50 3.18 23.01 3.30 Red 200 TFP0450 0.630 0.335 0.984 0.177 16.00 8.51 24.99 4.50 Black 200 TFP0500 0.650 0.394 1.102 0.197 16.51 10.01 27.99 5.00 Yellow 200 TFP0800 0.748 0.551 1.417 0.315 19.00 14.00 35.99 8.00 Dk. Blue 200 TFP0749 0.749 0.538 1.420 0.318 19.02 13.67 36.07 8.08 Clear 200 TFP1150 0.984 0.689 1.496 0.453 24.99 17.50 38.00 11.51 Purple 200 TFP1350 1.102 0.768 2.008 0.531 27.99 19.51 51.00 13.49 Red 100 TFP1480 1.000 0.819 1.929 0.583 25.40 20.80 49.00 14.81 Gray 100 TFP1600 1.220 0.866 2.087 0.630 30.99 22.00 53.01 16.00 Clear 100

PART A B C D A B C D

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

SILICONE MOUSE TAILS

SMT-79 0.079 1.33 2.01 33.78 500 SMT-80 0.080 2.08 2.03 52.83 500 SMT-83 0.083 1.93 2.11 49.02 500 SMT-100 0.100 2.08 2.54 52.83 500

PART NUMBER A B A B

QTY/BAG DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• For use in very small threaded and non-threaded holes• Ideal for electronic components• Flexibility allows for manipulation into irregular shapes• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 19

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

SFP0250 0.157 0.250 1.000 3.99 6.35 25.40 Clear 250 SFP0312 0.221 0.315 1.000 5.61 8.00 25.40 Black 250 SFP0406 0.315 0.380 1.000 8.00 9.65 25.40 Yellow 250 SFP0468 0.380 0.470 1.000 9.65 11.94 25.40 Clear 250 SFP0562 0.480 0.575 1.000 12.19 14.61 25.40 Lt. Blue 250 SFP0625 0.536 0.630 1.000 13.61 16.08 25.40 Purple 250 SFP0718 0.630 0.709 1.000 16.00 18.01 25.40 Red 250 SFP0787 0.709 0.787 1.000 18.01 19.99 25.40 Lt. Green 100 SFP0866 0.787 0.866 1.000 19.99 22.00 25.40 Gray 100 SFP0945 0.866 0.945 1.000 22.00 24.00 25.40 Clear 100 SFP1024 0.945 1.024 1.000 24.00 26.01 25.40 Black 100 SFP1102 1.024 1.102 1.000 26.01 27.99 25.40 Dk. Green 100

PART A B C A B C

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• For use in threaded holes• Creates a tighter seal than standard tapered plugs• Handle provides easy insertion and removal• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE FLANGELESS PLUGS

SILICONE MULTI-TAPERED PLUGS

SMTP-4 0.157 0.236 0.314 0.393 0.472 0.539 3.99 5.99 7.98 9.98 11.99 13.69 Blue 250 SMTP-8 0.314 0.393 0.472 0.551 0.630 0.906 7.98 9.98 11.99 14.00 16.00 23.01 Red 100 SMTP-10 0.393 0.472 0.551 0.630 0.709 0.894 9.98 11.99 14.00 16.00 18.01 22.71 Green 100 SMTP-24 0.532 0.615 0.697 0.780 0.862 0.965 13.51 15.62 17.70 19.81 21.89 24.51 Red 100

PART A B C D E F A B C D E F

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• For use in threaded and non-threaded holes• Multi-flange design means this plug can be used

for multiple hole sizes• Handle provides easy insertion and removal• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

EXPERT DESIGN ENGINEERS Need a custom masking solution? CFS has more than 40 years in the industry. Our engineers are available to work with you to solve your

most challenging masking issues.

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com20

CA

PS &

PLU

GS

SILICONE PULL PLUGSPRODUCT FEATURES• Temperature Rating: 600°F/315°C• Specifically designed to mask through holes• Can be used in threaded or non-threaded holes• Color coded for easy identification & reusable• Starter Kit available (see page 23)• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

PART A B C D A B C D

THREAD COLOR QTY/BAG NUMBER SIZE DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

SPP05 0.050 0.500 0.500 0.025 1.27 12.70 12.70 0.64 Clear 500 SPP06 0.062 0.375 0.337 0.046 1.57 9.53 8.56 1.17 1/20 Clear 500 SPP07 0.067 0.625 0.610 0.047 1.70 15.88 15.49 1.19 1/16 M2 Pink 500 SPP08 0.073 0.612 0.590 0.046 1.85 15.54 14.99 1.17 1/16 M2 Lt. Gray 500 SPP080 0.080 1.000 1.000 0.045 2.03 25.40 25.40 1.14 1/16 M2 Blue 500 SPP09 0.091 0.620 0.625 0.052 2.31 15.75 15.88 1.32 5/64 Yellow 500 SPP10 0.093 0.700 0.700 0.050 2.36 17.78 17.78 1.27 5/64 Gray 500 SPP11 0.104 0.625 0.625 0.062 2.64 15.88 15.88 1.57 3/32 Lt. Blue 500 SPP109 0.109 1.000 1.000 0.062 2.77 25.40 1.57 25.40 3/32 Green 500 SPP118 0.120 1.000 1.000 0.080 3.05 25.40 25.40 2.03 7/64 Red 500 SPP11A 0.125 0.625 0.625 0.062 3.18 15.88 15.88 1.57 7/64 White 500 SPP14 0.130 1.000 1.000 0.093 3.30 25.40 25.40 2.36 1/8 Clear 500 SPP17 0.142 0.625 0.558 0.085 3.61 15.88 14.17 2.16 1/8 Lt. Gray 500 SPP17L 0.142 1.250 1.250 0.085 3.61 31.75 31.75 2.16 1/8 Blue 500 SPP18 0.154 0.632 0.625 0.083 3.91 16.05 15.88 2.11 9/64 Yellow 500 SPP20 0.156 0.625 0.750 0.062 3.96 15.88 19.05 1.57 9/64 Gray 500 SPP158 0.158 1.250 1.250 0.082 4.01 31.75 31.75 2.08 9/64 Red 500 SPP22 0.162 0.625 0.581 0.096 4.11 15.88 14.76 2.44 5/32 Lt. Blue 500 SPP175 0.175 1.250 1.250 0.123 4.45 31.75 31.75 3.12 Gray 500 SPP190 0.190 1.250 1.250 0.110 4.83 31.75 31.75 2.79 Green 500 SPP190L 0.190 2.250 2.250 0.110 4.83 57.15 57.15 2.79 Clear 500 SPP23 0.195 0.625 0.625 0.110 4.95 15.88 15.88 2.79 11/64 M5 Red 500 SPP26 0.197 1.000 1.000 0.110 5.00 25.40 25.40 2.79 11/64 M5 White 500 SPP30 0.218 1.000 1.000 0.130 5.54 25.40 25.40 3.30 3/16 M6 Clear 500 SPP33 0.225 1.000 1.000 0.125 5.72 25.40 25.40 3.18 7/32 Pink 500 SPP244 0.244 1.250 1.250 0.165 6.20 31.75 31.75 4.19 Purple 500 SPP37 0.257 1.000 1.000 0.130 6.53 25.40 25.40 3.30 1/4 Lt. Gray 500 SPP265 0.265 1.250 1.250 0.186 6.73 31.75 31.75 4.72 Clear 500 SPP40 0.275 0.937 0.920 0.125 6.99 23.80 23.37 3.18 17/64 M8 Yellow 500 SPP40L 0.275 2.000 2.000 0.125 6.99 50.80 50.80 3.18 17/64 M8 White 500 SPP281 0.281 1.000 1.000 0.125 7.14 25.40 25.40 3.18 Red 500 SPP281L 0.281 1.300 1.275 0.125 7.14 33.02 32.39 3.18 Clear 500 SPP42 0.316 1.000 0.910 0.152 8.03 25.40 23.11 3.86 19/64 Gray 500 SPP43 0.335 1.000 1.000 0.153 8.51 25.40 25.40 3.89 5/16 White 500 SPP50 0.350 0.900 1.000 0.193 8.89 20.32 25.40 4.90 11/32 Clear 500 SPP375 0.375 1.000 1.000 0.157 9.53 25.40 25.40 3.99 Red 500 SPP55 0.384 1.000 1.000 0.154 9.75 25.40 25.40 3.91 3/8 M10 Pink 250 SPP55L 0.384 2.000 2.000 0.154 9.75 50.80 50.80 3.91 3/8 M10 Blue 250 SPP388 0.388 1.000 1.000 0.157 9.86 25.40 25.40 3.99 3/8 M10 Red 500 SPP400 0.400 1.000 1.000 0.191 10.16 25.40 25.40 4.85 13/32 Green 250 SPP60 0.408 1.000 1.000 0.191 10.36 25.40 25.40 4.85 13/32 Lt. Gray 250 SPP60L 0.405 2.000 2.250 0.270 10.29 50.80 57.15 6.86 Rusty 250 SPP437 0.437 1.500 1.500 0.300 11.10 38.10 38.10 7.62 Blue 250 SPP437XL 0.437 2.000 2.000 0.300 11.10 50.80 50.80 7.62 Clear 250 SPP66 0.441 1.000 1.000 0.200 11.20 25.40 25.40 5.08 1/2-13 M12 White 250 SPP67 0.445 1.000 1.000 0.255 11.30 25.40 25.40 6.48 7/16 Gray 250 SPP70 0.472 1.000 1.000 0.243 11.99 25.40 25.40 6.17 29/64 Lt. Blue 250 SPP73 0.496 1.000 1.000 0.250 12.60 25.40 25.40 6.35 15/32 White 250 SPP73L 0.496 2.000 2.000 0.250 12.60 50.80 50.80 6.35 15/32 Lt. Green 250 SPP77 0.510 1.000 0.956 0.256 12.95 25.40 24.28 6.50 1/2 Clear 250 SPP80 0.530 1.000 0.956 0.250 13.46 25.40 24.28 6.35 33/64 M14 Pink 250 SPP80L 0.530 2.062 2.062 0.250 13.46 52.37 52.37 6.35 33/64 M14 Pink 250 SPP85 0.571 1.000 1.000 0.303 14.50 25.40 25.40 7.70 3/16 Lt. Gray 250 SPP85L 0.571 1.750 1.750 0.303 14.50 44.45 44.45 7.70 3/16 Green 250 SPP89 0.612 1.000 1.000 0.250 15.54 25.40 25.40 6.35 19/32 Yellow 250 SPP89L 0.612 1.500 1.500 0.250 15.54 38.10 38.10 6.35 Clear 100 SPP90 0.640 1.000 1.000 0.375 16.26 25.40 25.40 9.53 5/8 Gray 100 SPP670XL 0.670 1.500 1.750 0.471 17.02 38.10 44.45 11.96 Clear 100 SPP95 0.707 1.250 1.326 0.375 17.96 31.75 33.68 9.53 13/16 Lt. Blue 100 SPP97 0.728 1.125 1.125 0.386 18.49 28.58 28.58 9.55 23/32 White 100 SPP97L 0.728 1.500 1.500 0.386 18.49 38.10 38.10 9.80 23/32 Red 100 SPP740 0.740 2.500 2.200 0.250 18.80 63.50 55.88 25.40 Clear 100 SPP750S 0.750 1.000 1.000 0.375 19.05 25.40 25.40 9.53 Clear 100 SPP100 0.770 1.000 0.927 0.375 19.56 25.40 23.55 9.53 3/4 M20 Clear 100 SPP100L 0.770 1.500 1.500 0.375 19.56 38.10 38.10 9.53 3/4 M20 Clear 100 SPP105 0.807 1.250 1.250 0.428 20.50 31.75 31.75 10.87 25/32 Pink 100 SPP110 0.888 1.000 1.000 0.372 22.56 25.40 25.40 9.45 7/8 Lt. Gray 100 SPP896 0.896 1.500 1.500 0.250 22.76 38.10 38.10 6.35 Green 100 SPP120 1.020 1.000 0.970 0.375 25.91 25.40 24.64 9.53 1 Yellow 100 SPP120L 1.020 1.250 1.250 0.375 25.91 31.75 31.75 9.53 Clear 100 SPP140 1.380 1.500 1.500 0.732 35.05 38.10 38.10 18.59 1-3/8 Gray 50

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 21

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

NEW

NEW

NEW

HP-M10x1.5 M10x1.5 Green 20 HP-M12x1.75 M12x1.75 Pink 20

PART NUMBER A COLOR QUANTITY

SILICONE HOLLOW PULL PLUGS

SILICONE BORE MASK PLUG COMBINATION

HANGING THREADED PLUGS

HPP-0530 0.530 2.000 2.383 0.250 13.46 50.80 60.53 6.35 Green 100 HPP-0780 0.780 2.000 2.284 0.386 19.81 50.80 58.01 9.80 Orange 100 HPP-1024 1.024 1.812 1.268 0.689 26.01 46.02 32.21 17.50 Yellow 100 HPP-1155 1.155 3.125 3.541 0.625 29.34 79.38 89.94 15.88 Red 100 HPP-1250 1.250 2.500 2.480 0.650 31.75 63.50 62.99 16.51 Blue 100

SBMP-5000 5.000 0.750 127.00 19.05 Yellow 100 SBMP-12000 12.000 0.750 304.80 19.05 Green 100

PART A B C D A B C D

COLOR QTY/BAG NUMBER

PART D E D E

COLOR QTY/BAG NUMBER

DIMENSIONS (INCHES)

DIMENSIONS (INCHES)

DIMENSIONS (MILLIMETERS)

DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Hollow plug offers more economical option for masking larger openings• Specifically designed to mask through holes• Can be used in threaded or non-threaded holes• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Plugs and stem sold separately• Mix and match tapered plugs with different stem length• Prevents plug loss due to pressure build up • Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Silicone over-molded onto metal plug allows for hanging,

grounding and masking in one• Metal core allows for conductivity• Silicone seals first thread and provides for clean paint stop-off• Custom Sizes available • Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SBMT-0650 0.545 0.755 1.000 13.84 19.18 25.40 Clear 100 SBMT-0750 0.645 0.855 1.000 16.38 21.72 25.40 Clear 100 SBMT-1050 0.945 1.155 1.000 24.00 29.34 25.40 Clear 100 SBMT-1350 1.245 1.455 1.000 31.62 36.96 25.40 Clear 100 SBMT-1680 1.485 1.875 1.000 37.72 47.63 25.40 Clear 100

PART A B C A B C

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com22

CA

PS &

PLU

GS

SILICONE WASHER PULL PLUGS

SWPP-M3 0.394 0.105 0.110 0.390 0.060 0.090 10.01 2.67 2.79 9.91 1.52 2.29 Dk. Blue 250 SWPP-M4 0.394 0.140 0.110 0.390 0.080 0.120 10.01 3.56 2.79 9.91 2.03 3.05 Dk. Green 250 SWPP-165 0.394 0.165 0.110 0.390 0.100 0.150 10.01 5.00 2.79 9.91 2.54 3.81 Purple 250 SWPP-M5 0.394 0.175 0.110 0.390 0.100 0.150 10.01 4.45 2.79 9.91 2.54 3.81 Clear 250 SWPP-197 0.394 0.197 0.110 0.390 0.100 0.150 10.01 5.00 2.79 9.91 2.54 3.81 Gray 250 SWPP-394 0.394 0.315 0.110 0.390 0.150 0.180 10.01 8.00 2.79 9.91 3.81 4.57 Clear 250 SWPP-500LT 0.500 0.170 0.107 0.390 0.095 0.140 12.70 4.32 2.72 9.91 2.41 3.55 Clear 250 SWPP-M6 0.591 0.217 0.165 0.390 0.120 0.180 15.01 5.51 4.19 9.91 3.05 4.57 White 250 SWPP-M6XL 0.551 0.217 0.165 0.591 0.120 0.160 14.00 5.51 4.19 15.01 3.05 4.06 Red 250 SWPP-M8 0.591 0.285 0.165 0.390 0.160 0.240 15.01 7.24 4.19 9.91 4.06 6.10 Gray 250 SWPP-M8XL 0.650 0.285 0.165 0.390 0.160 0.240 16.51 7.24 4.19 9.91 4.06 6.10 Blue 250 SWPP-M8SXL 0.650 0.285 0.165 0.390 0.168 0.240 16.51 7.24 4.19 9.91 4.27 6.10 White 250 SWPP-M10 0.787 0.375 0.210 0.390 0.215 0.320 19.99 9.53 5.33 9.91 5.46 8.13 Yellow 100 SWPP-M12 0.787 0.430 0.210 0.390 0.245 0.360 19.99 10.92 5.33 9.91 6.22 9.14 Pink 100 SWPP-120 0.787 0.473 0.210 0.390 0.380 0.250 19.99 12.01 5.33 9.91 9.65 6.35 Pink 100 SWPP-285 0.890 0.285 0.165 0.490 0.160 0.240 22.61 7.24 4.19 12.45 4.06 6.10 Red 250 SWPP-500 0.500 0.170 0.110 0.390 0.095 0.140 12.70 4.32 2.79 9.91 2.41 3.56 Pink 250 SWPP-562 0.562 0.195 0.110 0.390 0.110 0.160 14.27 4.95 2.79 9.91 2.54 4.06 Yellow 250 SWPP-625 0.625 0.225 0.110 0.390 0.128 0.190 15.88 5.72 2.79 9.91 3.18 4.83 Green 250 SWPP-688 0.688 0.285 0.165 0.390 0.165 0.240 17.48 7.24 4.19 9.91 4.19 6.10 Clear 250 SWPP-812 0.812 0.345 0.165 0.390 0.195 0.290 20.62 8.76 4.19 9.91 4.95 7.37 Gray 100 SWPP-445 0.812 0.445 0.165 0.390 0.195 0.290 20.62 11.30 4.19 9.91 4.95 7.37 Red 250 SWPP-922 0.922 0.400 0.210 0.390 0.230 0.340 23.42 10.16 5.33 9.91 5.92 8.64 White 100 SWPP-1060 1.060 0.460 0.210 0.390 0.265 0.390 26.92 11.68 5.33 9.91 6.73 9.91 Dk. Blue 100 SWPP-1060XL 1.120 0.430 0.390 1.330 0.200 0.200 28.45 10.92 9.91 33.78 5.08 5.08 White 100

PART A B C D E F A B C D E F

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Designed to mask through holes with a grounding area• Invert and push-in to mask chamfered holes• Can be used in threaded or non-threaded masking• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE FLANGE PULL PLUGS

SFPP170 0.170 0.130 0.300 1.000 1.000 4.32 3.30 7.62 25.40 25.40 Clear 500 SFPP205 0.205 0.130 0.330 1.000 1.000 5.21 3.30 8.38 25.40 25.40 White 500 SFPP30 0.218 0.130 0.330 1.000 1.000 5.54 3.30 8.38 25.40 25.40 Blue 500 SFPP33 0.230 0.125 0.350 1.000 1.000 5.84 3.18 8.89 25.40 25.40 Gray 500 SFPP281 0.281 0.150 0.400 1.000 1.000 7.14 3.81 10.16 25.40 25.40 Yellow 250 SFPP43 0.335 0.153 0.460 1.000 1.000 8.51 3.89 11.68 25.40 25.40 Orange 250 SFPP50 0.350 0.187 0.473 1.000 1.000 8.89 4.75 12.01 25.40 25.40 Pink 250 SFPP414 0.418 0.191 0.540 1.000 1.000 10.62 4.85 13.72 25.40 25.40 Green 250 SFPP67 0.445 0.255 0.560 1.000 1.000 11.30 6.48 14.22 25.40 25.40 Purple 250 SFPP490 0.490 0.255 0.610 1.000 1.000 12.45 6.48 15.49 25.40 25.40 White 250 SFPP516 0.520 0.260 0.610 1.000 1.000 13.21 6.60 15.49 25.40 25.40 Gray 250

PART A B C D E A B C D E

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• For masking through holes with lead-in threads• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 23

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

SILICONE PUSH WELD NUT PLUGS

PWNP-M6 0.179 0.275 0.257 0.830 0.358 4.55 6.99 6.53 21.08 9.09 Neon Blue 500 PWNP-M8 0.245 0.370 0.285 0.995 0.460 6.22 9.40 7.24 25.27 11.68 Neon Yellow 500 PWNP-M10 0.311 0.460 0.323 1.068 0.419 7.90 11.68 8.20 27.13 10.64 Neon Rusty Red 250 PWNP-M12 0.410 0.540 0.381 1.331 0.588 10.41 13.72 9.68 33.81 14.94 Neon Red 250 PWNP-M16 0.530 0.700 0.485 1.683 0.764 13.46 17.78 12.32 42.75 19.41 Neon Orange 100

PART A B C D E A B C D E

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Specifically designed to mask blind weld nuts• Push-in style used when the back of the weld nut is not accessible• Offers additional protection for lead-in and exit threads• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

DWPP-M4 0.172 0.110 0.123 4.37 3.51 2.79 Purple 1000 DWPP-M5 0.204 0.140 0.143 5.18 5.28 3.56 White 1000 DWPP-M6 0.243 0.172 0.176 6.17 5.94 4.37 Blue 1000 DWPP-M8 0.327 0.252 0.256 8.31 8.36 6.40 Yellow 1000 DWPP-M10 0.410 0.327 0.326 10.41 10.36 8.31 Green 500 DWPP-M12 0.502 0.391 0.377 12.75 13.44 9.93 Red 500 DWPP-M16 0.656 0.537 0.514 16.66 16.48 13.64 Green 250

PART A B C A B C

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Designed to mask weld nuts• Offers additional protection for lead-in and exit threads• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE DUAL WASHER PULL PLUGS

SILICONE CHAMFER PULL PLUGSPRODUCT FEATURES• Temperature Rating: 600°F/315°C• For use in threaded and non-threaded holes with lead-in chamfer• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SFCPP-220 0.220 0.120 0.380 1.000 2.88 5.59 3.05 9.65 25.40 73.15 Blue 500 SFCPP-280 0.280 0.200 0.500 1.000 2.88 7.11 5.08 12.70 25.40 73.15 Clear 250 SFCPP-360 0.360 0.200 0.820 1.000 3.30 9.14 5.08 20.83 25.40 83.82 Green 250 SFCPP-440 0.440 0.200 0.820 1.000 3.30 11.18 5.08 20.83 25.40 83.82 White 100 SFCPP-500 0.500 0.200 0.820 1.000 3.30 12.70 5.08 20.83 25.40 83.82 Red 100

PART A B C D E A B C D E

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com24

CA

PS &

PLU

GS

SILICONE LEADING PULL PLUGS

SLPP-M4 0.160 0.200 0.280 0.280 1.60 4.06 5.08 7.11 7.11 40.64 500 SLPP-M6 0.220 0.260 0.340 0.300 1.88 5.59 6.60 8.64 7.62 47.75 500 SLPP-M8 0.280 0.340 0.400 0.330 2.05 7.11 8.64 10.16 8.38 52.07 250 SLPP-M10 0.360 0.440 0.480 0.380 1.92 9.14 11.18 12.19 9.65 48.77 250 SLPP-M12 0.420 0.500 0.540 0.440 2.13 10.67 12.70 13.72 11.18 54.10 100 SLPP-M14 0.560 0.680 0.680 0.580 2.33 14.22 17.27 17.27 14.73 59.18 100

PART A B C D E A B C D E

QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Specifically designed to mask weld nuts• Offers additional protection for lead-in and exit threads• A more rigid option for a tighter seal, reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE DUAL FLANGE PULL PLUGSPRODUCT FEATURES• Temperature Rating: 600°F/315°C• For masking weld nuts• Offers additional protection for lead-in and exit threads• For easy removal, pull through after coating• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

DFPP-M5 0.160 0.273 0.245 1.300 4.06 6.93 6.22 33.02 Black 1000 DFPP200 0.197 0.307 0.260 1.284 5.00 7.80 6.60 32.61 Dk. Green 1000 DFPP-M6 0.200 0.267 0.308 1.300 5.08 6.78 7.82 33.02 Lt. Green 1000 DFPP-M8XL 0.264 0.374 0.345 1.343 6.71 9.50 8.76 34.11 Blue 1000 DFPP-M8 0.264 0.374 0.311 1.339 6.71 9.50 7.90 34.01 Red 1000 DFPP270A 0.270 0.374 0.260 1.330 6.86 9.50 6.60 33.78 White 1000 DFPP335 0.335 0.445 0.260 1.284 8.51 11.30 6.60 32.61 Lt. Green 500 DFPP-M10 0.335 0.445 0.355 1.375 8.51 11.30 9.02 34.93 Dk. Green 500 DFPP410 0.406 0.512 0.260 1.575 10.31 13.00 6.60 40.01 Gray 250 DFPP-M12 0.406 0.512 0.457 1.772 10.31 13.00 11.61 45.01 Purple 250 DFPP-535 0.535 0.685 0.260 1.750 13.59 17.40 6.60 44.45 Red 250 DFPP-M16 0.535 0.685 0.550 2.000 13.59 17.40 13.97 50.80 White 250 DFPP-M20 0.669 0.827 0.709 2.283 16.99 21.01 18.01 57.99 Blue 100

PART A B C D A B C D

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 25

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

** PATENT PENDING**

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• For use in threaded holes when a watertight seal is needed• A preferred plug for e-coating• Strong enough to withstand pressure build-up• Insert by hand or with power tool for efficiency• Metric and standard, coarse and fine threads available• Color coded for easy identification & reusable• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

TPF-138 #6 - 40 0.090 0.860 Neon Red 500 TPF-164 #8 - 36 0.100 0.870 Neon Pink 500 TPF-190 #10 - 32 0.110 0.880 Neon Orange 500 TPF-190L #10 - 32 0.110 1.055 Neon Green 500 TPF-250 1/4 - 28 0.130 0.920 Neon Yellow 500 TPF-313 5/16 - 24 0.150 0.940 Neon Green 500 TPF-375 3/8 - 24 0.150 0.940 Neon Blue 250 TPF-500 1/2 - 20 0.175 0.980 Neon Purple 250

TPC-138 #6 - 32 0.110 0.880 Neon Green 500 TPC-164 #8 - 32 0.110 0.880 Neon Blue 500 TPC-190 #10 - 24 0.145 0.920 Neon Purple 500 TPC-250 1/4 - 20 0.180 0.970 Neon Red 500 TPC-313 5/16 - 18 0.190 0.990 Neon Pink 500 TPC-375 3/8 - 16 0.220 1.010 Neon Orange 500 TPC-500 1/2 - 13 0.269 1.070 Neon Yellow 250 TPC-750 3/4 - 10 0.350 1.220 Neon Green 100

TPC-M6 M6 x 1.00 3.500 23.400 Neon Blue 500 TPC-M8 M8 x 1.25 4.400 24.500 Neon Purple 500 TPC-M10 M10 x 1.50 5.300 25.100 Neon Red 250 TPC-M12 M12 x 1.50 5.300 25.900 Neon Pink 250 TPC-M14 M14 x 2.00 7.000 27.300 Neon Orange 250 TPC-M14L M14 x 2.00 7.000 34.290 Neon Red 250

TPF-M6 M6 x 0.75 2.600 22.500 Neon Orange 500 TPF-M8 M8 x 1.00 3.500 23.600 Neon Yellow 500 TPF-M10 M10 x 1.25 4.400 24.200 Neon Green 250 TPF-M12 M12 x 1.25 4.400 25.000 Neon Blue 250

PART NUMBER A B C

COLOR QTY/BAG

PART NUMBER A B C

COLOR QTY/BAG

PART NUMBER A B C

COLOR QTY/BAG

PART NUMBER A B C

COLOR QTY/BAG

DIMENSIONS (FINE STANDARD)

DIMENSIONS (COARSE STANDARD)

DIMENSIONS (COARSE METRIC)

DIMENSIONS (FINE METRIC)

LOCAL DELIVERY AVAILABLE Inquire about delivery and VMI options through our

Wisconsin, California and Texas locations

SILICONE THREADED PLUGS

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com26

CA

PS &

PLU

GS

STREAMLINED ONLINE SHOPPINGAll Products featured in our Catalog are available through

our web store for immediate purchase. Visit us online for up-to-date pricing and to see volume discounts available.

SILICONE CAP KITPRODUCT FEATURES• A variety of Silicone Caps ranging in size from 0.070” to 0.750” OD• Ideal for small job shops with a variety of masking needs• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE TAPERED PLUG KITPRODUCT FEATURES• A variety of Silicone Tapered Plugs ranging in size from 0.125” to 1.625”• Ideal for small job shops with a variety of masking needs• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE PULL PLUG KITPRODUCT FEATURES• A variety of Silicone Pull Plugs fitting threads from 1/20 to 7/8• Ideal for small job shops with a variety of masking needs• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

MISC. SILICONE PLUG KITPRODUCT FEATURES• A variety of Silicone Plugs used to mask grounding areas and lead-in threads• Ideal for small job shops with a variety of masking needs• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE MASKING STARTER KITSPRODUCT FEATURES• Temperature Rating: 600°F/315°C• Ideal for small job shops with a variety of masking needs• Test kits for purchasing agents• Sample various sizes before buying in bulk• Silicone caps & plugs are reusable

SC-Kit

SPP-Kit

STP-Kit

MLP-Kit

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 27

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

SILICONE TUBING

CST0040 0.040 0.165 1.02 4.19 100 ft CST0062 0.062 0.187 1.57 4.75 100 ft CST0080 0.080 0.205 2.03 5.21 100 ft CST0093 0.093 0.218 2.36 5.54 100 ft CST0109 0.109 0.234 2.77 5.94 100 ft CST0125 0.125 0.250 3.18 6.35 100 ft CST0140 0.140 0.265 3.56 6.73 100 ft CST0156 0.156 0.281 3.96 7.14 100 ft CST0172 0.172 0.297 4.37 7.54 100 ft CST0187 0.187 0.312 4.75 7.92 100 ft CST0203 0.203 0.328 5.16 8.33 100 ft CST0218 0.218 0.343 5.54 8.71 100 ft CST0234 0.234 0.359 5.94 9.12 100 ft CST0250 0.250 0.375 6.35 9.53 100 ft CST0281 0.281 0.406 7.14 10.31 100 ft CST0312 0.312 0.437 7.92 11.10 100 ft CST0343 0.343 0.468 8.71 11.89 100 ft CST0375 0.375 0.500 9.53 12.70 100 ft CST0406 0.406 0.531 10.31 13.49 100 ft CST0437 0.437 0.562 11.10 14.27 100 ft CST0500 0.500 0.625 12.70 15.88 100 ft CST0625 0.625 0.750 15.88 19.05 50 ft CST0750 0.750 0.875 19.05 22.23 50 ft CST0875 0.875 1.000 22.23 25.40 50 ft CST1000 1.000 1.125 25.40 28.58 50 ft CST1250 1.250 1.375 31.75 34.93 50 ft CST1500 1.500 1.625 38.10 41.28 50 ft

PART NUMBER ID OD ID OD

LENGTH (FEET) DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Mask long studs and pems with irregular geometries• May be used in conjunction with caps• Cut to fit any length, make slightly longer than stud for easy removal• Standard wall thickness 0.062”, can be special ordered to 0.125”• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SILICONE STAR TUBINGPRODUCT FEATURES• Temperature Rating: 600°F/315°C• Alternative to standard tubing when easier application and

removal is needed• May be used in conjunction with caps• Cut to fit any length• Color coded for easy identification • Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

STAR-0200 0.200 0.250 5.08 6.35 White 100 ft STAR-0300 0.300 0.375 7.62 9.53 Rusty Red 100 ft STAR-0400 0.400 0.500 10.16 12.70 Yellow 100 ft STAR-0500 0.500 0.625 12.70 15.88 Purple 100 ft STAR-0625 0.625 0.750 15.88 19.05 Rusty Red 50 ft STAR-0725 0.725 0.875 18.42 22.23 Blue 50 ft STAR-0850 0.850 1.000 21.59 25.40 White 50 ft STAR-1000 1.000 1.250 25.40 31.75 Clear 25 ft STAR-1250 1.250 1.500 31.75 38.10 Purple 25 ft STAR-1500 1.500 1.750 38.10 44.45 Rusty Red 25 ft STAR-1750 1.750 2.000 44.45 50.80 Orange 25 ft

PART MINOR ID MAJOR OD MINOR ID MAJOR OD

COLOR LENGTH NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com28

CA

PS &

PLU

GS

SOLID SILICONE CORD

SILICONE SPONGE CORD

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• Mask grooved, slotted and irregular shapes• Use for O-ring groove protection• Flexible, cut to size• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

PRODUCT FEATURES• Temperature Rating: 600°F/315°C• A softer, more pliable option than solid cord• Mask grooved, slotted and irregular shapes• Use for O-ring groove protection• Color coded for easy identification• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SC-0070 0.070 1.78 100 ft SC-0090 0.090 2.29 100 ft SC-0103 0.103 2.62 100 ft SC-0109 0.109 2.77 100 ft SC-0125 0.125 3.18 100 ft SC-0139 0.139 3.53 100 ft SC-0156 0.156 3.96 100 ft SC-0187 0.187 4.75 100 ft

SSC-0062 0.062 1.57 Blue 50 ft SSC-0125 0.125 3.18 Black 50 ft SSC-0187 0.187 4.75 Red 50 ft SSC-0218 0.218 5.54 Red 50 ft SSC-0250 0.250 6.35 Gray 50 ft SSC-0312 0.312 7.92 Blue 50 ft SSC-0375 0.375 9.53 White 50 ft SSC-0437 0.437 11.10 Gray 50 ft SSC-0500 0.500 12.70 Orange 25 ft SSC-0625 0.625 15.88 Red 25 ft SSC-0750 0.750 19.05 Gray 25 ft SSC-0875 0.875 22.23 White 25 ft SSC-1000 1.000 25.40 Red 25 ft

PART NUMBER OD OD

LENGTH (FEET)

PART NUMBER OD OD

COLOR LENGTH (FEET)

DIMENSIONS (INCHES)

DIMENSIONS (INCHES)

DIMENSIONS (MILLIMETERS)

DIMENSIONS (MILLIMETERS)

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 29

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

SILICONE SHEETINGPRODUCT FEATURES• Temperature Rating: 600°F/315°C• Stocked in 36” x 36” sheets• Can be purchased as individual sheets• We can die-cut this to meet your specification and add

adhesive backings• Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating

SSHT-032 .032” 0.81 36 x 36 SSHT-062 .062” 1.57 36 x 36 SSHT-093 .093” 2.36 36 x 36 SSHT-125 .125” 3.18 36 x 36 SSHT-187 .187” 4.75 36 x 36 SSHT-250 .250” 6.35 36 x 36 SSHT-375 .375” 9.53 36 x 36 SSHT-500 .500” 12.70 36 x 36

PART NUMBER THICKNESS THICKNESS

SIZE DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

EPDM TAPERED PLUG KITPRODUCT FEATURES• Temperature Rating: 350°F/177°C• A variety of EPDM Tapered Plugs ranging in size from 0.125” to 1.625”• Ideal for small job shops with a variety of masking needs• Test out different sizes before buying in bulk• Used in Wet Painting, Anodizing and Plating

EPDM PULL PLUG KITPRODUCT FEATURES• Temperature Rating: 350°F/177°C• A variety of EPDM Pull Plugs ranging from 0.062” to 0.888”• Ideal for small job shops with a variety of masking needs• Test out different sizes before buying in bulk• Used in Wet Painting, Anodizing and Plating

EPP-Kit

ETP-Kit

CUSTOM RUBBER MOLDING & EXTRUDING As a premier rubber molding supplier, CFS knows how to work

with customers to ensure new parts perform as anticipated. Contact us for all your custom rubber and plastic molding needs!

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com30

CA

PS &

PLU

GS

EC093 0.093 0.193 0.750 2.36 4.90 19.05 1000 EC100 0.100 0.200 1.000 2.54 5.08 25.40 1000 EC109 0.109 0.209 0.750 2.77 5.31 19.05 1000 EC125-0500 0.125 0.225 0.500 3.18 5.72 12.70 1000 EC125 0.125 0.245 1.000 3.18 6.22 25.40 1000 EC140 0.140 0.260 1.000 3.56 6.60 25.40 1000 EC148 0.148 0.268 1.000 3.76 6.81 25.40 1000 EC156 0.156 0.276 1.000 3.96 7.01 25.40 1000 EC172-0500 0.172 0.300 0.500 4.37 7.62 12.70 1000 EC172 0.172 0.292 1.000 4.37 7.42 25.40 1000 EC180 0.180 0.270 1.000 4.57 6.86 25.40 1000 EC187 0.187 0.307 1.000 4.75 7.80 25.40 1000 EC218 0.218 0.338 1.000 5.54 8.59 25.40 500 EC223-0750 0.223 0.345 0.750 5.66 8.76 19.05 500 EC223 0.223 0.343 1.500 5.66 8.71 38.10 500 EC234-0787 0.234 0.360 0.787 5.94 9.14 19.99 500 EC234 0.234 0.354 1.000 5.94 8.99 25.40 500 EC250 0.250 0.370 1.000 6.35 9.40 25.40 500 EC281 0.281 0.401 1.000 7.14 10.19 25.40 500 EC295 0.295 0.415 1.500 7.49 10.54 38.10 500 EC313 0.313 0.433 1.000 7.95 11.00 25.40 500 EC355 0.355 0.475 1.500 9.02 12.07 38.10 500 EC375 0.375 0.495 1.000 9.53 12.57 25.40 500 EC375-1500 0.375 0.505 1.500 9.53 12.82 38.10 500 EC406 0.406 0.526 1.000 10.31 13.36 25.40 500 EC437 0.437 0.557 1.000 11.10 14.15 25.40 500 EC456-1500 0.456 0.556 1.500 11.58 14.12 38.10 500 EC468 0.468 0.588 1.000 11.89 14.94 25.40 500 EC480 0.480 0.600 1.500 12.19 15.24 38.10 500 EC500 0.500 0.620 1.500 12.70 15.75 38.10 500 EC535 0.535 0.635 1.500 13.59 16.13 38.10 250 EC562 0.562 0.682 1.500 14.27 17.32 38.10 250 EC600 0.600 0.708 1.500 15.24 17.98 38.10 250 EC625 0.625 0.745 1.500 15.88 18.92 38.10 250 EC687 0.687 0.807 1.500 17.45 20.50 38.10 250 EC750 0.750 0.870 1.500 19.05 22.10 38.10 250 EC812 0.812 0.932 1.500 20.62 23.67 38.10 250 EC875 0.875 0.995 1.500 22.23 25.27 38.10 250 EC937 0.937 1.057 1.500 23.80 26.85 38.10 250 EC1000 1.000 1.120 1.500 25.40 28.45 38.10 250 EC1062 1.062 1.182 2.000 26.97 30.02 50.80 250 EC1125 1.125 1.245 1.500 28.58 31.62 38.10 100 EC1187 1.187 1.307 1.500 30.15 33.20 38.10 100 EC1250 1.250 1.370 1.500 31.75 34.80 38.10 100 EC1380 1.380 1.505 1.000 35.05 38.23 25.40 100 EC1500 1.500 1.620 1.750 38.10 41.15 44.45 100 EC1750 1.750 1.870 2.000 44.45 47.50 50.80 100 EC1875 1.875 1.995 2.000 47.63 50.67 50.80 100

PART ID OD LENGTH ID OD LENGTH

QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 375° F / 190° C• Recommended for masking studs, pems and tube ends• Flexible material allows cap to conform to irregular shapes• May be inverted as a plug• Rounded top makes insertion into holes easier• Paint will not come off EPDM materials• Often preferred over Silicone for Wet Spray applications• Used in Wet Painting, Anodizing and Plating

EPDM CAPS

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 31

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

WE ARE A 3MTM PREFERRED CONVERTER See page 61 for stock 3MTM materials

ETP99 0.031 0.125 0.625 0.79 3.18 15.88 1000 ETP100 0.062 0.125 0.625 1.57 3.18 15.88 1000 ETP101 0.062 0.187 0.625 1.57 4.75 15.88 1000 ETP101XL 0.062 0.187 0.750 1.57 4.75 19.05 1000 ETP102 0.125 0.250 0.750 3.18 6.35 19.05 1000 ETP102XL 0.125 0.250 1.000 3.18 6.35 25.40 1000 ETP103 0.187 0.343 0.625 4.75 8.71 15.88 1000 ETP103XL 0.187 0.343 1.000 4.75 8.71 25.40 1000 ETP104 0.250 0.375 0.750 6.35 9.53 19.05 1000 ETP104XL 0.250 0.437 1.000 6.35 11.10 25.40 1000 ETP105 0.250 0.375 0.500 6.35 9.53 12.70 100 ETP375XL 0.250 0.375 1.250 6.35 9.53 31.75 500 ETP000 0.343 0.468 0.813 8.71 11.89 20.65 100 ETP000XL 0.312 0.500 1.000 7.92 12.70 25.40 500 ETP106 0.343 0.437 0.687 8.71 11.10 17.45 100 ETP500XL 0.125 0.500 2.000 3.18 12.70 50.80 250 ETP107 0.375 0.562 1.000 9.53 14.27 25.40 100 ETP107XL 0.313 0.562 1.125 7.95 14.27 28.58 500 ETP00 0.406 0.593 1.000 10.31 15.06 25.40 100 ETP108 0.437 0.625 0.812 11.10 15.88 20.62 100 ETP0 0.500 0.656 0.812 12.70 16.66 20.62 100 ETP1 0.562 0.750 1.000 14.27 19.05 25.40 100 ETP2 0.625 0.781 1.000 15.88 19.84 25.40 100 ETP3 0.718 0.937 1.000 18.24 23.80 25.40 100 ETP4 0.750 1.000 1.000 19.05 25.40 25.40 100 ETP5 0.906 1.062 1.000 23.01 26.97 25.40 100 ETP5.5 0.937 1.100 1.000 23.80 27.94 25.40 100 ETP6 1.031 1.250 1.000 26.19 31.75 25.40 100 ETP6.5 1.062 1.312 1.000 26.97 33.32 25.40 100 ETP7 1.187 1.437 1.000 30.15 36.50 25.40 100 ETP1456 1.188 1.456 1.000 30.18 36.98 25.40 50 ETP8 1.312 1.625 1.000 33.32 41.28 25.40 50 ETP9 1.468 1.750 1.000 37.29 44.45 25.40 50 ETP10 1.625 1.969 1.000 41.28 50.01 25.40 50 ETP11 1.875 2.203 1.000 47.63 55.96 25.40 25 ETP11.5 2.000 2.468 1.000 50.80 62.69 25.40 25 ETP12 2.125 2.500 1.000 53.98 63.50 25.40 25 ETP13 2.281 2.687 1.000 57.94 68.25 25.40 25 ETP13.5 2.437 2.968 1.375 61.90 75.39 34.93 each ETP14 3.000 3.500 1.500 76.20 88.90 38.10 each ETP15 3.250 4.000 1.500 82.55 101.60 38.10 each ETP16 3.500 5.000 2.000 88.90 127.00 50.80 each

PART A B C A B C

QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 375° F / 190° C• For use in both threaded and non-threaded holes, compresses for a tight fit• Most often used for blind holes• Tapered design fits a variety of hole diameters• Paint will not come off EPDM materials• Starter Kit Available (See page 26)• Used in Wet Painting, Anodizing and Plating

EPDM TAPERED PLUGS

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com32

CA

PS &

PLU

GS

EPP06 0.062 0.375 0.337 0.046 1.57 9.53 8.56 1.17 500 EPP07 0.067 0.625 0.610 0.047 1.70 15.88 15.49 1.19 500 EPP08 0.073 0.612 0.590 0.046 1.85 15.54 14.99 1.17 500 EPP09 0.091 0.620 0.625 0.052 2.31 15.75 15.88 1.32 500 EPP10 0.093 0.700 0.700 0.050 2.36 17.78 17.78 1.27 500 EPP11 0.104 0.625 0.625 0.062 2.64 15.88 15.88 1.57 500 EPP11A 0.125 0.625 0.625 0.062 3.18 15.88 15.88 1.57 500 EPP14 0.130 1.000 1.000 0.093 3.30 25.40 25.40 2.36 500 EPP17 0.142 0.625 0.558 0.085 3.61 15.88 14.17 2.16 500 EPP18 0.154 0.632 0.625 0.083 3.91 16.05 15.88 2.11 500 EPP20 0.156 0.625 0.750 0.062 3.96 15.88 19.05 1.57 500 EPP22 0.162 0.625 0.581 0.096 4.11 15.88 14.76 2.44 500 EPP23 0.195 0.625 0.625 0.110 4.95 15.88 15.88 2.79 500 EPP26 0.197 1.000 1.000 0.110 5.00 25.40 25.40 2.79 500 EPP30 0.218 1.000 1.000 0.130 5.54 25.40 25.40 3.30 500 EPP33 0.225 1.000 1.000 0.125 5.72 25.40 25.40 3.18 500 EPP37 0.257 1.000 1.000 0.130 6.53 25.40 25.40 3.30 500 EPP40 0.275 0.937 0.920 0.125 6.99 23.80 23.37 3.18 500 EPP42 0.316 1.000 0.910 0.152 8.03 25.40 23.11 3.86 500 EPP43 0.335 1.000 1.000 0.153 8.51 25.40 25.40 3.89 500 EPP50 0.350 0.881 0.925 0.193 8.89 20.32 25.40 4.90 500 EPP55 0.384 1.000 1.000 0.154 9.75 25.40 25.40 3.91 500 EPP60 0.408 1.000 0.956 0.191 10.36 25.40 25.40 4.85 250 EPP67 0.445 1.000 1.000 0.255 11.30 25.40 25.40 6.48 250 EPP70 0.472 1.000 1.000 0.243 11.99 25.40 25.40 6.17 250 EPP73 0.496 1.000 1.000 0.250 12.60 25.40 25.40 6.35 250 EPP77 0.510 1.000 1.000 0.256 12.95 25.40 24.28 6.50 250 EPP80 0.530 1.000 1.000 0.250 13.46 25.40 24.28 6.35 250 EPP85 0.571 1.000 1.000 0.303 14.50 25.40 25.40 7.70 250 EPP89 0.612 1.000 1.000 0.250 15.54 25.40 25.40 6.35 250 EPP90 0.640 1.000 1.000 0.256 16.26 25.40 25.40 9.53 100 EPP95 0.707 1.250 1.326 0.250 17.96 31.75 33.68 9.53 100 EPP97 0.728 1.125 1.125 0.386 18.49 28.58 28.58 9.55 100 EPP100 0.770 1.000 0.927 0.375 19.56 25.40 23.55 9.53 100 EPP105 0.807 1.250 1.250 0.428 20.50 31.75 31.75 10.87 100 EPP110 0.888 1.000 1.000 0.372 22.56 25.40 25.40 9.45 100 EPP120 1.020 1.000 0.970 0.375 25.91 25.40 24.64 9.53 100 EPP130 1.380 1.000 1.000 0.375 35.05 25.40 25.40 9.53 100 EPP140 1.380 1.500 1.500 0.732 35.05 38.10 38.10 18.59 100

PART A B C D A B C D

QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 375° F / 190° C• Specifically designed to mask through holes• Can be used in threaded or non-threaded holes• Color coded for easy identification• Starter Kit Available (See page 26)• Used in Wet Painting, Anodizing and Plating

EPDM PULL PLUGS

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 33

CA

PS & PLU

GS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

VC062-0500 0.062 0.162 0.500 1.57 4.11 12.70 1000 VC080-0500 0.080 0.180 0.500 2.03 4.57 12.70 1000 VC080-0750 0.080 0.180 0.750 2.03 4.57 19.05 1000 VC093-0500 0.093 0.193 0.500 2.36 4.90 12.70 1000 VC093-0750 0.093 0.193 0.750 2.36 4.90 19.05 1000 VC109-0500 0.109 0.209 0.500 2.77 5.31 12.70 1000 VC109 0.109 0.209 1.000 2.77 5.31 25.40 1000 VC125-0500 0.125 0.225 0.500 3.18 5.72 12.70 1000 VC125 0.125 0.225 1.000 3.18 5.72 25.40 1000 VC140-0500 0.140 0.240 0.500 3.56 6.10 12.70 1000 VC140 0.140 0.240 1.000 3.56 6.10 25.40 1000 VC156-0500 0.156 0.256 0.500 3.96 6.50 12.70 1000 VC156 0.156 0.256 1.000 3.96 6.50 25.40 1000 VC172-0500 0.172 0.272 0.500 4.37 6.91 12.70 1000 VC172 0.172 0.272 1.000 4.37 6.91 25.40 1000 VC187-0500 0.187 0.287 0.500 4.75 7.29 12.70 1000 VC187 0.187 0.287 1.000 4.75 7.29 25.40 1000 VC203-0500 0.203 0.303 0.500 5.16 7.70 12.70 1000 VC203 0.203 0.303 1.000 5.16 7.70 25.40 1000 VC218 0.218 0.318 1.000 5.54 8.08 25.40 1000 VC234 0.234 0.334 1.000 5.94 8.48 25.40 1000 VC250 0.250 0.350 1.000 6.35 8.89 25.40 1000 VC281 0.281 0.381 1.000 7.14 9.68 25.40 1000 VC312 0.312 0.412 1.000 7.92 10.46 25.40 1000 VC343 0.343 0.443 1.000 8.71 11.25 25.40 1000 VC375 0.375 0.475 1.000 9.53 12.07 25.40 1000 VC406 0.406 0.506 1.000 10.31 12.85 25.40 1000 VC437 0.437 0.537 1.000 11.10 13.64 25.40 1000 VC500 0.500 0.600 1.000 12.70 15.24 25.40 500 VC531 0.531 0.631 1.000 13.49 16.03 25.40 500 VC562 0.562 0.662 1.000 14.27 16.81 25.40 500 VC625 0.625 0.725 1.000 15.88 18.38 25.40 500 VC687 0.687 0.787 1.000 17.45 19.99 25.40 500 VC750 0.750 0.850 1.000 19.05 21.59 25.40 500 VC812 0.812 0.912 1.000 20.62 23.16 25.40 500 VC875 0.875 0.975 1.000 22.23 24.77 25.40 500 VC937 0.937 1.037 1.000 23.80 26.34 25.40 500 VC1000 1.000 1.100 1.000 25.40 27.94 25.40 500 VC1062 1.062 1.162 1.000 26.97 29.51 25.40 500 VC1125 1.125 1.225 1.000 28.58 31.12 25.40 500 VC1187 1.187 1.287 1.000 30.15 32.69 25.40 500 VC1250 1.250 1.350 1.000 31.75 34.29 25.40 500 VC1375 1.375 1.475 1.000 34.93 37.47 25.40 500 VC1500 1.500 1.600 1.000 38.10 40.64 25.40 500 VC1625 1.625 1.725 1.000 41.28 43.82 25.40 500 VC1750 1.750 1.850 1.000 44.45 46.99 25.40 500 VC1875 1.875 1.975 1.000 47.63 50.17 25.40 500 VC2000 2.000 2.100 1.000 50.80 53.34 25.40 500

PART ID OD LONG ID OD LONG

QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 275° F / 135° C• Recommended for masking studs, pems and tube ends• Rounded top makes insertion into holes easier • Color coded for easy identification • Rigid material makes for good shipping and surface protection of threads• Highly resistant to corrosion - a preferred choice for plating

VINYL CAPS

3D PRINTING & PROTOTYPES Verify custom parts prior to incurring tooling costs.

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com34

CA

PS &

PLU

GS

PRODUCT FEATURES• Temperature Rating: 180° F / 82° C• For use in masking threaded holes• Creates an excellent seal especially for lead-in threads• Works well with Heli-Coil inserts• An inexpensive solution when high temperatures are not encountered• Used in Wet Painting, Anodizing and Plating

LDPE SELF THREADING PLUGS

LDPE-2 0.062 0.082 0.660 1.57 2.08 16.76 500 LDPE-3 0.080 0.100 0.600 2.03 2.54 15.24 500 LDPE-4 0.085 0.106 0.668 2.16 2.69 16.97 500 LDPE-5 0.095 0.120 0.735 2.41 3.05 18.67 500 LDPE-6 0.105 0.131 0.803 2.67 3.33 20.40 500 LDPE-7 0.136 0.156 0.780 3.45 3.96 19.81 500 LDPE-8 0.143 0.171 0.800 3.63 4.34 20.32 500 LDPE-10 0.150 0.186 0.820 3.81 4.72 20.83 250 LDPE-12 0.180 0.212 0.895 4.57 5.38 22.73 250 LDPE-250 0.210 0.250 1.120 5.33 6.35 28.45 250 LDPE-312 0.295 0.340 0.890 7.49 8.64 22.61 250 LDPE-375 0.348 0.400 1.005 8.84 10.16 25.53 250 LDPE-500 0.400 0.470 1.120 10.16 11.94 28.45 250

PART A B C A B C

QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

NSTP-2 0.062 0.082 0.660 1.57 2.08 16.76 Red 500 NSTP-3 0.080 0.100 0.600 2.03 2.54 15.24 Blue 500 NSTP-4 0.085 0.106 0.668 2.16 2.69 16.97 Yellow 500 NSTP-5 0.095 0.120 0.735 2.41 3.05 18.67 Green 500 NSTP-6 0.105 0.131 0.803 2.67 3.33 20.40 Red 500 NSTP-7 0.136 0.156 0.780 3.45 3.96 19.81 Blue 500 NSTP-8 0.143 0.171 0.800 3.63 4.34 20.32 Yellow 500 NSTP-10 0.150 0.186 0.820 3.81 4.72 20.83 Green 500

PART A B C A B C

COLOR QTY/BAG NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

PRODUCT FEATURES• Temperature Rating: 400° F / 204° C• Seals lead threads extremely well, avoiding gauging issues• Designed for superior sealing and holding power and a watertight seal• Works well with Heli-Coil inserts• Leave in post cure to prevent flash rust • Ideal for high temperature masking and electroless nickel plating

HIGH TEMP SELF THREADING PLUGS

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 35

TAPES &

DIEC

UTS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

Polyester® Tapes ................................................................36Poly Discs ............................................................................38Green Poly Donuts .............................................................39Green Poly Rectangles ......................................................39Green Poly Squares ...........................................................39Green Poly Tab Discs .........................................................40Crepe Masking Tapes ........................................................40High Temp Crepe Tape .....................................................40Industrial Grade Crepe Tape ............................................41High Temp Crepe Discs ....................................................42Industrial Grade Discs .......................................................42High Temp Crepe Squares ...............................................43High Temp Crepe Rectangles ..........................................43Poly Film Tape Mask...........................................................43

Polyimide Tapes .................................................................44Glass Cloth Tape ................................................................44Polyimide Discs ..................................................................46Glass Cloth Discs ...............................................................46Plotting Tapes .....................................................................47High Temp Blue Vinyl Tape ...............................................48High Temp Green Vinyl Tape ............................................48Vinyl Tape ............................................................................49Non-Adhesive Yellow Vinyl ...............................................49 Aluminum Foil Tape ...........................................................50Lead Foil Tape ....................................................................51Aluminum Foil Discs ..........................................................52Lead Foil Discs ....................................................................52

TAPES & DIE CUTS

WE HAVE YOU COVEREDCFS has a large inventory of masking tapes and die cut products. Tapes can be custom slit to any

width from 0.062”. Die cuts reduce manufacturing costs by providing precise, pre-cut pieces which

eliminate hand-trimming. Tapes and die cuts have high quality adhesives for clean, residue-free

removal. Custom die cuts available! Our masking products can be used for powder coating,

e-coating, anodizing, wet spray and plating. As a 3MTM Preferred Converter we have access to

hundreds of additional products.

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com36

TAPE

S &

DIE

CU

TS

GT215-0125 OPT-0125 RR-0125 BPT-0125 RPT-0125 0.125 3.17 72 144 GT215-0187 OPT-0187 RR-0187 BPT-0187 RPT-0187 0.187 4.76 72 144 GT215-0250 OPT-0250 RR-0250 BPT-0250 RPT-0250 0.250 6.35 72 144 GT215-0312 OPT-0312 RR-0312 BPT--0312 RPT-0312 0.312 7.94 72 96 GT215-0375 OPT-0375 RR-0375 BPT-0375 RPT-0375 0.375 9.52 72 96 GT215-0437 OPT-0437 RR-0437 BPT-0437 RPT-0437 0.437 1.11 72 72 GT215-0500 OPT-0500 RR-0500 BPT-0500 RPT-0500 0.500 12.70 72 72 GT215-0562 OPT-0562 RR-0562 BPT-0562 RPT-0562 0.562 14.29 72 64 GT215-0625 OPT-0625 RR-0625 BPT-0625 RPT-0625 0.625 15.88 72 60 GT215-0687 OPT-0687 RR-0687 BPT-0687 RPT-0687 0.687 17.46 72 48 GT215-0750 OPT-0750 RR-0750 BPT-0750 RPT-0750 0.750 19.05 72 48 GT215-0812 OPT-0812 RR-0812 BPT-0812 RPT-0812 0.812 20.63 72 40 GT215-0875 OPT-0875 RR-0875 BPT-0875 RPT-0875 0.875 22.23 72 40 GT215-0937 OPT-0937 RR-0937 BPT-0937 RPT-0937 0.937 23.81 72 36 GT215-1000 OPT-1000 RR-1000 BPT-1000 RPT-1000 1.000 25.40 72 36 GT215-1125 OPT-1125 RR-1125 BPT-1125 RPT-1125 1.125 28.58 72 32 GT215-1250 OPT-1250 RR-1250 BPT-1250 RPT-1250 1.250 31.75 72 32 GT215-1375 OPT-1375 RR-1375 BPT-1375 RPT-1375 1.375 34.93 72 24 GT215-1500 OPT-1500 RR-1500 BPT-1500 RPT-1500 1.500 38.10 72 24 GT215-1625 OPT-1625 RR-1625 BPT-1625 RPT-1625 1.625 41.28 72 24 GT215-1750 OPT-1750 RR-1750 BPT-1750 RPT-1750 1.750 44.45 72 24 GT215-1875 OPT-1875 RR-1875 BPT-1875 RPT-1875 1.187 47.63 72 24 GT215-2000 OPT-2000 RR-2000 BPT-2000 RPT-2000 2.000 50.80 72 24 GT215-2250 OPT-2250 RR-2250 BPT-2250 RPT-2250 2.250 57.15 72 12 GT215-2500 OPT-2500 RR-2500 BPT-2500 RPT-2500 2.500 63.50 72 12 GT215-2750 OPT-2750 RR-2750 BPT-2750 RPT-2750 2.750 69.85 72 12 GT215-3000 OPT-3000 RR-3000 BPT-3000 RPT-3000 3.000 76.20 72 12 GT215-3250 OPT-3250 RR-3250 BPT-3250 RPT-3250 3.250 82.55 72 8 GT215-3500 OPT-3500 RR-3500 BPT-3500 RPT-3500 3.500 88.90 72 8 GT215-4000 OPT-4000 RR-4000 BPT-4000 RPT-4000 4.000 101.60 72 8 GT215-4500 OPT-4500 RR-4500 BPT-4500 RPT-4500 4.500 114.30 72 8 GT215-5000 OPT-5000 RR-5000 BPT-5000 RPT-5000 5.000 127.00 72 8 GT215-5500 OPT-5500 RR-5500 BPT-5500 RPT-5500 5.500 139.70 72 8 GT215-6000 OPT-6000 RR-6000 BPT-6000 RPT-6000 6.000 152.40 72 8 GT215-7000 OPT-7000 RR-7000 BPT-7000 RPT-7000 7.000 177.80 72 4 GT215-8000 OPT-8000 RR-8000 BPT-8000 RPT-8000 8.000 203.20 72 4 GT215-9000 OPT-9000 RR-9000 BPT-9000 RPT-9000 9.000 228.60 72 4 G2T15-10000 OPT-10000 RR-10000 BPT-10000 RPT-10000 10.000 254.00 72 4 GT215-12000 OPT-12000 RR-12000 BPT-12000 RPT-12000 12.000 304.80 72 4 GT215-18000 OPT-18000 RR-18000 BPT-18000 RPT-18000 18.000 457.20 72 4

PART PART PART PART PART WIDTH WIDTH ROLL LENGTH CASE NUMBER NUMBER NUMBER NUMBER NUMBER INCHES MILLIMETERS (YARDS) QUANTITY

GREEN ORANGE RUSTY RED BLUE RED

POLYESTER® TAPESThese tapes are manufactured from commercial grade polyester films single coated with a pressure sensitive silicone adhesive. All polyester tapes are low-shrink and remove cleanly after long bake cycles with no residue. CFS can slit any of our tapes to custom widths for same day shipment. We can also die cut any of our tapes into discs, donuts, squares or rectangles.

Additional sizes available.

PLOTTING TAPES FROM CFS For our customers with their own plotting capabilities we offer all our tapes

on a liner. Material can be purchased in widths ranging from 6” to 36”. May be used in vinyl cutting machines. See page 47.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 37

TAPES &

DIEC

UTS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

GREEN POLYESTER®PRODUCT FEATURES• Temperature Rating: 400° F / 204° C• Industry standard for general masking needs• The most economical tape masking option• Used in Powder Coating, E-Coating, Anodizing and PlatingConstruction• 2 Mil Polyester Carrier• 1.5 Mil Silicone Adhesive• 3.5 Mil Total Thickness

ORANGE POLYESTER®Product Features• Temperature Rating: 425° F / 218° C• Highly transparent for easy placement and alignment• Used in Powder Coating and E-CoatingConstruction• 2 Mil Polyester Carrier• 1.5 Mil Silicone Adhesive• 3.5 Mil Total Thickness

RUSTY RED POLYESTER®Product Features• Temperature Rating: 425° F / 218° C• Often used when higher heat resistance is needed than green polyester tape• Used in Powder Coating and E-CoatingConstruction• 2 Mil Polyester Carrier• 1.5 Mil Silicone Adhesive• 3.5 Mil Total Thickness

BLUE POLYESTER®Product Features• Temperature Rating: 400° F / 204° C• Conformable for uneven surfaces or irregular shapes• Provides a fine line masking solution• Used in Powder Coating, E-Coating, Anodizing and PlatingConstruction• 1 Mil Polyester Carrier• 2.0 Mil Silicone Adhesive• 3.0 Mil Total Thickness

RED POLYESTER®Product Features• Temperature Rating: 425° F / 218° C• Extra thick silicone adhesive, with 1 Mil of carrier making it extremely conformable• High adhesion for sharp line definition - no undercutting• Ideal choice for soldier strip baths and immersion coating processes where

a moisture tight seal is needed • Used in Powder Coating, E-Coating, Anodizing, Etching and PlatingConstruction• 1 Mil Polyester Carrier• 3.0 Mil Silicone Adhesive• 4.0 Mil Total Thickness

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com38

TAPE

S &

DIE

CU

TS

POLY DISCSAdditional sizes available.

GD0125 OPD-0125 RRD-0125 BPD0125 RPD0125 0.125 3.18 2000 GD0156 OPD-0156 RRD-0156 BPD0156 RPD0156 0.156 3.96 2000 (GD1000) GD0187 OPD-0187 RRD-0187 BPD0187 RPD0187 0.187 4.75 2000 GD0218 OPD-0218 RRD-0218 BPD0218 RPD0218 0.218 5.54 2000 (GD1000) GD0250 OPD-0250 RRD-0250 BPD0250 RPD0250 0.250 6.35 2000 GD0281 OPD-0281 RRD-0281 BPD0281 RPD0281 0.281 7.14 2000 (GD1000) GD0312 OPD-0312 RRD-0312 BPD0312 RPD0312 0.312 7.92 2000 GD0375 OPD-0375 RRD-0375 BPD0375 RPD0375 0.375 9.53 2000 GD0400 OPD-0400 RRD-0400 BPD0400 RPD0400 0.400 10.16 2000 (GD1000) GD0437 OPD-0437 RRD-0437 BPD0437 RPD0437 0.437 11.10 2000 GD0500 OPD-0500 RRD-0500 BPD0500 RPD0500 0.500 12.70 2000 GD0562 OPD-0562 RRD-0562 BPD0562 RPD0562 0.562 14.27 2000 GD0625 OPD-0625 RRD-0625 BPD0625 RPD0625 0.625 15.88 2000 GD0687 OPD-0687 RRD-0687 BPD0687 RPD0687 0.687 17.45 1000 GD0750 OPD-0750 RRD-0750 BPD0750 RPD0750 0.750 19.05 1000 GD0812 OPD-0812 RRD-0812 BPD0812 RPD0812 0.812 20.62 1000 GD0875 OPD-0875 RRD-0875 BPD0875 RPD0875 0.875 22.23 1000 GD0937 OPD-0937 RRD-0937 BPD0937 RPD0937 0.937 23.80 1000 GD1000 OPD-1000 RRD-1000 BPD1000 RPD1000 1.000 25.40 1000 GD1062 OPD-1062 RRD-1062 BPD1062 RPD1062 1.062 26.97 500 GD1125 OPD-1125 RRD-1125 BPD1125 RPD1125 1.125 28.58 500 GD1187 OPD-1187 RRD-1187 BPD1187 RPD1187 1.187 30.15 500 GD1250 OPD-1250 RRD-1250 BPD1250 RPD1250 1.250 31.75 500 GD1312 OPD-1312 RRD-1312 BPD1312 RPD1312 1.312 33.32 500 GD1375 OPD-1375 RRD-1375 BPD1375 RPD1375 1.375 34.93 500 GD1437 OPD-1437 RRD-1437 BPD1437 RPD1437 1.437 36.50 500 GD1500 OPD-1500 RRD-1500 BPD1500 RPD1500 1.500 38.10 500 GD1625 OPD-1625 RRD-1625 BPD1625 RPD1625 1.625 41.28 500 GD1750 OPD-1750 RRD-1750 BPD1750 RPD1750 1.750 44.45 500 GD1812 OPD-1812 RRD-1812 BPD1812 RPD1812 1.812 46.02 500 GD1875 OPD-1875 RRD-1875 BPD1875 RPD1875 1.875 47.63 500 GD2000 OPD-2000 RRD-2000 BPD2000 RPD2000 2.000 50.80 500 GD2250 OPD-2250 RRD-2250 BPD2250 RPD2250 2.250 57.15 250 GD2375 OPD-2375 RRD-2375 BPD2375 RPD2375 2.375 60.33 250 GD2500 OPD-2500 RRD-2500 BPD2500 PRD2500 2.500 63.50 250 GD2750 OPD-2750 RRD-2750 BPD2750 RPD2750 2.750 69.85 250 GD3000 OPD-3000 RRD-3000 BPD3000 RPD3000 3.000 76.20 250 GD3250 OPD-3250 RRD-3250 BPD3250 RPD3250 3.250 82.55 250 GD3500 OPD-3500 RRD-3500 BPD3500 RPD3500 3.500 88.90 250 GD3750 OPD-3750 RRD-3750 BPD3750 RPD3750 3.750 95.25 250 GD4000 OPD-4000 RRD-4000 BPD4000 RPD4000 4.000 101.60 250 GD4250 OPD-4250 RRD-4250 BPD4250 RPD4250 4.250 107.95 100 GD4500 OPD-4500 RRD-4500 BPD4500 RPD4500 4.500 114.30 100 GD5000 OPD-5000 RRD-5000 BPD5000 RPD5000 5.000 127.00 100 GD5500 OPD-5500 RRD-5500 BPD5500 RPD5500 5.500 139.70 100 GD6000 OPD-6000 RRD-6000 BPD6000 RPD6000 6.000 152.40 100

PART PART PART PART PART DIAMETER DIAMETER ROLL NUMBER NUMBER NUMBER NUMBER NUMBER INCHES MILLIMETERS QUANTITY

GREEN ORANGE RUSTY RED BLUE RED

POLYESTER® DIE CUTSOur polyester die cuts utilize the same high-quality materials as our tape rolls. Die cuts reduce manufacturing costs by providing precise, pre-cut pieces that eliminate hand-trimming. Designed for fast application and clean removal, our poly die cuts 3/8” and larger come standard with a split back liner. Donuts, squares and rectangles are available in any of our tapes. Please contact us for sizes/shapes not listed.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 39

TAPES &

DIEC

UTS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

GWD0125X0500 0.125 3.18 0.500 12.70 1000 GWD0187X0500 0.187 4.75 0.500 12.70 1000 GWD0250X0500 0.250 6.35 0.500 12.70 1000 GWD0250X0625 0.250 6.35 0.625 15.87 1000 GWD0250X0750 0.250 6.35 0.750 19.05 1000 GWD0250X0875 0.250 6.35 0.875 22.22 1000 GWD0250X1000 0.250 6.35 1.000 25.40 1000 GWD0375X0750 0.375 9.53 0.750 19.05 1000 GWD0375X1000 0.375 9.53 1.000 25.40 1000 GWD0500X0750 0.500 12.70 0.750 19.05 1000 GWD0500X1000 0.500 12.70 1.000 25.40 1000

GRT250X500 0.250 6.35 0.500 12.70 1000 GRT250X750 0.250 6.35 0.750 19.05 1000 GRT250X1000 0.250 6.35 1.000 25.40 1000 GRT500X750 0.500 12.70 0.750 19.05 1000 GRT500X1000 0.500 12.70 1.000 25.40 1000 GRT750X1000 0.750 19.05 1.000 25.40 1000 GRT1000X1500 1.000 25.40 1.500 38.10 500 GRT1000X2000 1.000 25.40 2.000 50.80 500 GRT1000X3000 1.000 25.40 3.000 76.20 500 GRT1500X2000 1.500 38.10 2.000 50.80 500 GRT1500X3000 1.500 38.10 3.000 76.20 500 GRT2000X3000 2.000 50.80 3.000 76.20 250 GRT2000X4000 2.000 50.80 4.000 101.60 250

GSQ0250 0.250 6.35 0.250 6.35 1000 GSQ0375 0.375 9.53 0.375 9.53 1000 GSQ0500 0.500 12.70 0.500 12.70 1000 GSQ0625 0.625 15.87 0.625 15.87 1000 GSQ0750 0.750 19.05 0.750 19.05 1000 GSQ1000 1.000 25.40 1.000 25.40 500 GSQ1250 1.250 31.75 1.250 31.75 500 GSQ1500 1.500 38.10 1.500 38.10 500 GSQ1750 1.750 44.45 1.750 44.45 500 GSQ2000 2.000 50.80 2.000 50.80 250 GSQ3000 3.000 76.20 3.000 76.20 250 GSQ4000 4.000 101.60 4.000 101.60 250

PART ID ID OD OD ROLL NUMBER INCHES MILLIMETERS INCHES MILLIMETERS QUANTITY

PART LENGTH LENGTH WIDTH WIDTH ROLL NUMBER INCHES MILLIMETERS INCHES MILLIMETERS QUANTITY

PART LENGTH LENGTH WIDTH WIDTH ROLL NUMBER INCHES MILLIMETERS INCHES MILLIMETERS QUANTITY

GREEN POLY DONUTS Additional sizes available.

GREEN POLY RECTANGLESAdditional sizes available.

GREEN POLY SQUARESAdditional sizes available.

DonutsDiscs Rectangles Squares

ALSO AVAILABLE IN ORANGE, RUSTY RED, BLUE AND RED

ALSO AVAILABLE IN ORANGE, RUSTY RED, BLUE AND RED

ALSO AVAILABLE IN ORANGE, RUSTY RED, BLUE AND RED

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com40

TAPE

S &

DIE

CU

TS

GTAB-0250 0.250 6.35 500 GTAB-0312 0.312 7.92 500 GTAB-0375 0.375 9.53 500 GTAB-0394 0.394 10.00 500 GTAB-0437 0.437 11.09 500 GTAB-0500 0.500 12.70 500 GTAB-0562 0.562 14.27 500 GTAB-0625 0.625 15.87 500 GTAB-0750 0.750 19.05 500 GTAB-0787 0.787 19.98 500 GTAB-0875 0.875 22.22 500 GTAB-0984 0.984 24.99 500 GTAB-1000 1.000 25.40 500 GTAB-1125 1.125 28.57 500 GTAB-1187 1.187 30.15 500 GTAB-1250 1.250 31.75 500 GTAB-1375 1.375 34.92 500 GTAB-1500 1.500 38.10 500 GTAB-1625 1.625 41.27 500 GTAB-1750 1.750 44.45 500 GTAB-1875 1.875 47.62 500 GTAB-2000 2.000 50.80 250 GTAB-2250 2.250 57.15 250 GTAB-2500 2.500 63.50 250 GTAB-2750 2.750 69.85 250 GTAB-3000 3.000 76.20 250

PART DIAMETER DIAMETER ROLL NUMBER INCHES MILLIMETERS QUANTITY

GREEN POLY TAB DISCSThese tab discs are an industry standout. Unlike others, ours have a solid, seamless contact surface - no folding which allows for leakage and failures! The transparent base of the disc means that half of the placement area is clearly visible for easy application. Laminated with our popular green polyester tape, the tab portion lays flat yet is easily located for quick removal.

Product Features• Temperature Rating: 400° F / 204° C• Leakproof seal is ideal for E-Coating• Removes cleanly even after long bake cycles with no residue• Used in Powder Coating, E-Coating, Anodizing and Plating

HIGH TEMP CREPE Product Features• Temperature Rating: 325° F / 163° C• Offers an excellent balance of quick stick, panel adhesion and holding properties• Used in Low Temperature Powder Coating and Wet Spray PaintingConstruction• Smooth crepe paper backing• Natural rubber/resin adhesive• 7.5 Mil Total Thickness

CREPE MASKING TAPESCrepe masking tapes were developed to help protect surrounding surfaces from overspray, provide crisp paint lines, and remove easily and cleanly when finished. Crepe tapes adhere well, resist solvents and water from the paint, and remove cleanly without damaging the subsurface. The crepe backing can conform to curved and irregular surfaces and hand tears for tool-free application. CFS can slit any of our tapes to custom widths for same day shipment. We can also die cut our tapes into discs, donuts, squares or rectangles.

Additional sizes available.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 41

TAPES &

DIEC

UTS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

MASKING CAPS AND PLUGS Our large stock of high temp silicone caps, flange, pull & washer plugs means

most orders ship same day. See page 9 for more information.

HTC-0125 ICT-0125 0.125 3.17 60 144 HTC-0187 ICT-0187 0.187 4.76 60 144 HTC-0250 ICT-0250 0.250 6.35 60 144 HTC-0312 ICT-0312 0.312 7.94 60 96 HTC-0375 ICT-0375 0.375 9.52 60 96 HTC-0437 ICT-0437 0.437 11.11 60 72 HTC-0500 ICT-0500 0.500 12.70 60 72 HTC-0562 ICT-0562 0.562 14.29 60 64 HTC-0625 ICT-0625 0.625 15.88 60 60 HTC-0687 ICT-0687 0.687 17.46 60 48 HTC-18MM ICT-18MM 0.708 18.00 60 48 HTC-0750 ICT-0750 0.750 19.05 60 48 HTC-0812 ICT-0812 0.812 20.63 60 40 HTC-0875 ICT-0875 0.875 22.23 60 40 HTC-0937 ICT-0937 0.937 23.81 60 36 HTC-24MM ICT-24MM 0.944 24.00 60 36 HTC-1000 ICT-1000 1.000 25.40 60 36 HTC-1125 ICT-1125 1.125 28.58 60 32 HTC-1250 ICT-1250 1.250 31.75 60 32 HTC-1375 ICT-1375 1.375 34.93 60 24 HTC-36MM ICT-36MM 1.417 36.00 60 24 HTC-1500 ICT-1500 1.500 38.10 60 24 HTC-1625 ICT-1625 1.625 41.28 60 24 HTC-1750 ICT-1750 1.750 44.45 60 24 HTC-1875 ICT-1875 1.187 47.63 60 24 HTC-48MM ICT-48MM 1.889 48.00 60 24 HTC-2000 ICT-2000 2.000 50.80 60 24 HTC-2250 ICT-2250 2.250 57.15 60 12 HTC-2500 ICT-2500 2.500 63.50 60 12 HTC-2750 ICT-2750 2.750 69.85 60 12 HTC-72MM ICT-72MM 2.830 72.00 60 12 HTC-3000 ICT-3000 3.000 76.20 60 12 HTC-3250 ICT-3250 3.250 82.55 60 8 HTC-3500 ICT-3500 3.500 88.90 60 8 HTC-4000 ICT-4000 4.000 101.60 60 8 HTC-4500 ICT-4500 4.500 114.30 60 8 HTC-5000 ICT-5000 5.000 127.00 60 8 HTC-5500 ICT-5500 5.500 139.70 60 8 HTC-6000 ICT-6000 6.000 152.40 60 8 HTC-7000 ICT-7000 7.000 177.80 60 4 HTC-8000 ICT-8000 8.000 203.20 60 4 HTC-9000 ICT-9000 9.000 228.60 60 4 HTC-10000 ICT-10000 10.000 254.00 60 4 HTC-12000 ICT-12000 12.000 304.80 60 4 HTC-18000 ICT-18000 18.000 457.20 60 4

PART PART WIDTH WIDTH ROLL LENGTH CASE NUMBER NUMBER INCHES MILLIMETERS (YARDS) QUANTITY

INDUSTRIAL GRADE CREPEProduct Features• Temperature Rating: 225° F / 107° C• Ideal for interior paint masking, light duty bundling, packaging, splicing, and tabbing• Used when air drying parts after wet paintingConstruction• Coarse crepe paper backing • Natural rubber/synthetic blend adhesive • 5.3 Mil Total Thickness

HIGH TEMP CREPE INDUSTRIAL GRADE

Additional sizes available.

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com42

TAPE

S &

DIE

CU

TS

HIGH TEMP DISCS INDUSTRIAL GRADE DISCS

HIGH TEMP CREPE DISCS & INDUSTRIAL GRADE DISCS

HCD0125 LCD-0125 0.125 3.18 5000 HCD0156 LCD-0156 0.156 3.96 1000 HCD0187 LCD-0187 0.187 4.75 5000 HCD0218 LCD-0218 0.218 5.54 1000 HCD0250 LCD-0250 0.250 6.35 5000 HCD0281 LCD-0281 0.281 7.14 1000 HCD0312 LCD-0312 0.312 7.92 5000 HCD0375 LCD-0375 0.375 9.53 5000 HCD0400 LCD-0400 0.400 10.16 1000 HCD0437 LCD-0437 0.437 11.10 5000 HCD0500 LCD-0500 0.500 12.70 5000 HCD0562 LCD-0562 0.562 14.27 5000 HCD0625 LCD-0625 0.625 15.88 5000 HCD0687 LCD-0687 0.687 17.45 5000 HCD0750 LCD-0750 0.750 19.05 5000 HCD0812 LCD-0812 0.812 20.62 4000 HCD0875 LCD-0875 0.875 22.23 4000 HCD0937 LCD-0937 0.937 23.80 4000 HCD1000 LCD-1000 1.000 25.40 2000 HCD1062 LCD-1062 1.062 26.97 2000 HCD1125 LCD-1125 1.125 28.58 2000 HCD1187 LCD-1187 1.187 30.15 2000 HCD1250 LCD-1250 1.250 31.75 2000 HCD1312 LCD-1312 1.312 33.32 2000 HCD1375 LCD-1375 1.375 34.93 2000 HCD1437 LCD-1437 1.437 36.50 2000 HCD1500 LCD-1500 1.500 38.10 2000 HCD1562 LCD-1562 1.562 39.67 2000 HCD1625 LCD-1625 1.625 41.28 1000 HCD1687 LCD-1687 1.687 42.85 1000 HCD1750 LCD-1750 1.750 44.45 1000 HCD1812 LCD-1812 1.812 46.02 1000 HCD1875 LCD-1875 1.875 47.63 1000 HCD1937 LCD-1937 1.937 49.20 1000 HCD2000 LCD-2000 2.000 50.80 500 HCD2125 LCD-2125 2.125 53.98 500 HCD2250 LCD-2250 2.250 57.15 500 HCD2375 LCD-2375 2.375 60.33 500 HCD2500 LCD-2500 2.500 63.50 500 HCD2625 LCD-2625 2.625 66.68 500 HCD2750 LCD-2750 2.750 69.85 500 HCD2875 LCD-2875 2.875 73.02 500 HCD3000 LCD-3000 3.000 76.20 500 HCD3250 LCD-3250 3.250 82.55 500 HCD3500 LCD-3500 3.500 88.90 500 HCD3625 LCD-3625 3.625 92.08 500 HCD3750 LCD-3750 3.750 95.25 500 HCD4000 LCD-4000 4.000 101.60 250 HCD4250 LCD-4250 4.250 107.95 250 HCD4500 LCD-4500 4.500 114.30 250 HCD5000 LCD-5000 5.000 127.00 250 HCD5250 LCD-5250 5.250 133.35 250 HCD5500 LCD-5500 5.500 139.70 250 HCD5750 LCD-5750 5.750 146.05 250 HCD6000 LCD-6000 6.000 152.40 250

PART PART DIAMETER DIAMETER ROLL NUMBER NUMBER INCHES MILLIMETERS QUANTITY

Additional sizes available.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 43

TAPES &

DIEC

UTS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

HTSQ0250 0.250 6.35 0.250 6.35 1000 HTSQ0375 0.375 9.53 0.375 9.53 1000 HTSQ0500 0.500 12.70 0.500 12.70 1000 HTSQ0625 0.625 15.87 0.625 15.87 1000 HTSQ0750 0.750 19.05 0.750 19.05 1000 HTSQ1000 1.000 25.40 1.000 25.40 500 HTSQ1250 1.250 31.75 1.250 31.75 500 HTSQ1500 1.500 38.10 1.500 .8.10 500 HTSQ1750 1.750 44.45 1.750 44.45 500 HTSQ2000 2.000 50.80 2.000 5.80 250 HTSQ3000 3.000 76.20 3.000 76.20 250 HTSQ4000 4.000 101.60 4.000 101.60 250

HTRT250X500 0.250 6.35 0.500 12.70 1000 HTRT250X750 0.250 6.35 0.750 19.05 1000 HTRT250X1000 0.250 6.35 1.000 25.40 1000 HTRT500X750 0.500 12.70 0.750 19.05 1000 HTRT500X1000 0.500 12.70 1.000 25.40 1000 HTRT750X1000 0.750 19.05 1.000 25.40 1000 HTRT1000X1500 1.000 25.40 1.500 38.10 500 HTRT1000X2000 1.000 25.40 2.000 50.80 500 HTRT1000X3000 1.000 25.40 3.000 76.20 500 HTRT1500X2000 1.500 38.10 2.000 50.80 500 HTRT1500X3000 1.500 38.10 3.000 76.20 500 HTRT2000X3000 2.000 50.80 3.000 76.20 250 HTRT2000X4000 2.000 50.80 4.000 101.60 250

PART LENGTH LENGTH WIDTH WIDTH ROLL NUMBER INCHES MILLIMETERS INCHES MILLIMETERS QUANTITY

PART LENGTH LENGTH WIDTH WIDTH ROLL NUMBER INCHES MILLIMETERS INCHES MILLIMETERS QUANTITY

HIGH TEMP CREPE SQUARESAdditional sizes available.

HIGH TEMP CREPE RECTANGLESAdditional sizes available.

PTFM-6000 6.000 152.40 PTFM-7000 7.000 177.80 PTFM-8000 8.000 203.20 PTFM-9000 9.000 228.60 PTFM-10000 10.000 254.00 PTFM-11000 11.000 279.40 PTFM-12000 12.000 304.80

PART WIDTH WIDTH NUMBER INCHES MILLIMETERS

POLY FILM TAPE MASK Product Features• Temperature Rating: 300° F / 149° C• Very conformable• Used in Wet PaintingConstruction• 1” High Temp Crepe x2• 25 Mil HDPE film

Additional sizes available.

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com44

TAPE

S &

DIE

CU

TS

POLYIMIDE TAPESPolyimide Tapes are used in printed circuit board (PCB) production, automotive and aerospace industries. It maintains excellent physical, mechanical and electrical properties over a wide range of temperatures - continuous up to 500°F for 1 hour & short exposures over 700°F. This tape is manufactured from commercial grade polyimide film with a special silicone adhesive which leaves no residue when removed. CFS can slit any of our tapes to custom widths for same day shipment.

1 MIL POLYIMIDE TAPEProduct Features• Temperature Rating: 500° F / 260° C• Meets Class H Requirements, flame retardant• Excellent dielectric strength and chemical resistance• Very conformable for uneven surfaces or irregular shapes• Used in Powder Coating, E-Coating, Wave Soldering, Hot Air Leveling, and Circuit Board InsulationConstruction• 1 Mil Polyimide Carrier• 1.5 Mil Silicone Adhesive• 2.5 Mil Total Thickness

2 MIL POLYIMIDE TAPEProduct Features• Temperature Rating: 500° F / 260° C• Meets Class H Requirements, flame retardant• Excellent dielectric strength and chemical resistance• Used in Powder Coating, E-Coating, Wave Soldering, Hot Air Leveling, and Circuit Board InsulationConstruction• 2 Mil Polyimide Carrier• 1.5 Mil Silicone Adhesive• 3.5 Mil Total Thickness

GLASS CLOTH TAPEThis tape is manufactured from a high quality, woven fiberglass cloth with a silicone adhesive. Glass Cloth Tape can withstand continuous temperatures to 500° F with excursions to 550° F or higher depending on the type and duration of the heat source. Conformable and abrasion resistant. Flame resistant specifications can be met.

Product Features• Temperature Rating: 500° F / 260° C• Fray-free edges• Conformable for uneven surfaces or irregular shapes• Best abrasion resistance, high tensile strength• Used in Powder Coating, E-Coating, Shot Blasting, Thermal Spray and processes requiring

high heat resistanceConstruction• 5 Mil Fiberglass Cloth Carrier• 2 Mil Silicone Adhesive• 7 Mil Total Thickness

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 45

TAPES &

DIEC

UTS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

KPT-0125 KPT2-0125 GCT-0125 0.125 3.17 36 144 KPT-0187 KPT2-0187 GCT-0187 0.187 4.76 36 144 KPT-0250 KPT2-0250 GCT-0250 0.250 6.35 36 144 KPT-0312 KPT2-0312 GCT-0312 0.312 7.94 36 96 KPT-0375 KPT2-0375 GCT-0375 0.375 9.52 36 96 KPT-0437 KPT2-0437 GCT-0437 0.437 1.11 36 72 KPT-0500 KPT2-0500 GCT-0500 0.500 12.70 36 72 KPT-0562 KPT2-0562 GCT-0562 0.562 14.29 36 64 KPT-0625 KPT2-0625 GCT-0625 0.625 15.88 36 60 KPT-0687 KPT2-0687 GCT-0687 0.687 17.46 36 48 KPT-0750 KPT2-0750 GCT-0750 0.750 19.05 36 48 KPT-0812 KPT2-0812 GCT-0812 0.812 20.63 36 40 KPT-0875 KPT2-0875 GCT-0875 0.875 22.23 36 40 KPT-0937 KPT2-0937 GCT-0937 0.937 23.81 36 36 KPT-1000 KPT2-1000 GCT-1000 1.000 25.40 36 36 KPT-1125 KPT2-1125 GCT-1125 1.125 28.58 36 32 KPT-1250 KPT2-1250 GCT-1250 1.250 31.75 36 32 KPT-1375 KPT2-1375 GCT-1375 1.375 34.93 36 24 KPT-1500 KPT2-1500 GCT-1500 1.500 38.10 36 24 KPT-1625 KPT2-1625 GCT-1625 1.625 41.28 36 24 KPT-1750 KPT2-1750 GCT-1750 1.750 44.45 36 24 KPT-1875 KPT2-1875 GCT-1875 1.187 47.63 36 24 KPT-2000 KPT2-2000 GCT-2000 2.000 50.80 36 24 KPT-2250 KPT2-2250 GCT-2250 2.250 57.15 36 12 KPT-2500 KPT2-2500 GCT-2500 2.500 63.50 36 12 KPT-2750 KPT2-2750 GCT-2750 2.750 69.85 36 12 KPT-3000 KPT2-3000 GCT-3000 3.000 76.20 36 12 KPT-3250 KPT2-3250 GCT-3250 3.250 82.55 36 8 KPT-3500 KPT2-3500 GCT-3500 3.500 88.90 36 8 KPT-4000 KPT2-4000 GCT-4000 4.000 101.60 36 8 KPT-4500 KPT2-4500 GCT-4500 4.500 114.30 36 8 KPT-5000 KPT2-5000 GCT-5000 5.000 127.00 36 8 KPT-5500 KPT2-5500 GCT-5500 5.500 139.70 36 8 KPT-6000 KPT2-6000 GCT-6000 6.000 152.40 36 8 KPT-7000 KPT2-7000 GCT-7000 7.000 177.80 36 4 KPT-8000 KPT2-8000 GCT-8000 8.000 203.20 36 4 KPT-9000 KPT2-9000 GCT-9000 9.000 228.60 36 4 KPT-10000 KPT2-10000 GCT-10000 10.000 254.00 36 4 KPT-12000 KPT2-12000 GCT-12000 12.000 304.80 36 4 KPT-18000 KPT2-18000 GCT-18000 18.000 457.22 36 4

PART PART PART WIDTH WIDTH ROLL LENGTH CASE NUMBER NUMBER NUMBER INCHES MILLIMETERS (YARDS) QUANTITY

1 MIL 2 MIL 5 MIL POLYIMIDE POLYIMIDE GLASS CLOTH

POLYIMIDE TAPES/GLASS CLOTH TAPEAdditional sizes available.

CUSTOM GASKET FABRICATION CFS produces the gasket and component die cuts you need for reliable performance. See page 6 for more information.

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com46

TAPE

S &

DIE

CU

TS

1 MIL POLYIMIDE DISCS 2 MIL POLYIMIDE DISCS 5 MIL GLASS CLOTH DISCS

KPD-0125 KPD2-0125 GCD0125 0.125 3.18 2000 KPD-0156 KPD2-0156 GCD0156 0.156 3.96 2000 KPD-0187 KPD2-0187 GCD0187 0.187 4.75 2000 KPD-0218 KPD2-0218 GCD0218 0.218 5.54 2000 KPD-0250 KPD2-0250 GCD0250 0.250 6.35 2000 KPD-0281 KPD2-0281 GCD0281 0.281 7.14 2000 KPD-0312 KPD2-0312 GCD0312 0.312 7.92 2000 KPD-0375 KPD2-0375 GCD0375 0.375 9.53 2000 KPD-0400 KPD2-0400 GCD0400 0.400 10.16 2000 KPD-0437 KPD2-0437 GCD0437 0.437 11.10 2000 KPD-0500 KPD2-0500 GCD0500 0.500 12.70 2000 KPD-0562 KPD2-0562 GCD0562 0.562 14.27 2000 KPD-0625 KPD2-0625 GCD0625 0.625 15.88 2000 KPD-0687 KPD2-0687 GCD0687 0.687 17.45 1000 KPD-0750 KPD2-0750 GCD0750 0.750 19.05 1000 KPD-0812 KPD2-0812 GCD0812 0.812 20.62 1000 KPD-0875 KPD2-0875 GCD0875 0.875 22.23 1000 KPD-0937 KPD2-0937 GCD0937 0.937 23.80 1000 KPD-1000 KPD2-1000 GCD1000 1.000 25.40 1000 KPD-1062 KPD2-1062 GCD1062 1.062 26.97 500 KPD-1125 KPD2-1125 GCD1125 1.125 28.58 500 KPD-1187 KPD2-1187 GCD1187 1.187 30.15 500 KPD-1250 KPD2-1250 GCD1250 1.250 31.75 500 KPD-1312 KPD2-1312 GCD1312 1.312 33.32 500 KPD-1375 KPD2-1375 GCD1375 1.375 34.93 500 KPD-1437 KPD2-1437 GCD1437 1.437 36.50 500 KPD-1500 KPD2-1500 GCD1500 1.500 38.10 500 KPD-1625 KPD2-1625 GCD1625 1.625 41.28 500 KPD-1750 KPD2-1750 GCD1750 1.750 44.45 500 KPD-1812 KPD2-1812 GCD1812 1.812 46.02 500 KPD-1875 KPD2-1875 GCD1875 1.875 47.63 500 KPD-2000 KPD2-2000 GCD2000 2.000 50.80 500 KPD-2250 KPD2-2250 GCD2250 2.250 57.15 250 KPD-2375 KPD2-2375 GCD2375 2.375 60.33 250 KPD-2500 KPD2-2500 GCD2500 2.500 63.50 250 KPD-2750 KPD2-2750 GCD2750 2.750 69.85 250 KPD-3000 KPD2-3000 GCD3000 3.000 76.20 250 KPD-3250 KPD2-3250 GCD3250 3.250 82.55 250 KPD-3500 KPD2-3500 GCD3500 3.500 88.90 250 KPD-3750 KPD2-3750 GCD3750 3.750 95.25 250 KPD-4000 KPD2-4000 GCD4000 4.000 101.60 250 KPD-4250 KPD2-4250 GCD4250 4.250 107.95 100 KPD-4500 KPD2-4500 GCD4500 4.500 114.30 100 KPD-5000 KPD2-5000 GCD5000 5.000 127.00 100 KPD-5500 KPD2-5500 GCD5500 5.500 139.70 100 KPD-6000 KPD2-6000 GCD6000 6.000 152.40 100

PART PART PART DIAMETER DIAMETER ROLL NUMBER NUMBER NUMBER INCHES MILLIMETERS QUANTITY

2 Mil1 Mil Glass Cloth

POLYIMIDE/GLASS CLOTH DISCS DONUTS, SQUARES AND RECTANGLES ALSO AVAILABLE

Additional sizes available.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 47

TAPES &

DIEC

UTS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

NEW

GPL-6000 OPL-6000 BPL-6000 RPL-6000 6.000 152.40 72 GPL-8000 OPL-8000 BPL-8000 RPL-8000 8.000 203.20 72 GPL-9000 OPL-9000 BPL-9000 RPL-9000 9.000 228.60 72 GPL-10000 OPL-10000 BPL-10000 RPL-10000 10.000 254.00 72 GPL-12000 OPL-12000 BPL-12000 RPL-12000 12.000 304.80 72 GPL-14000 OPL-14000 BPL-14000 RPL-14000 14.000 355.60 72 GPL-16000 OPL-16000 BPL-16000 RPL-16000 16.000 406.40 72 GPL-18000 OPL-18000 BPL-18000 RPL-18000 18.000 457.20 72 GPL-20000 OPL-20000 BPL-20000 RPL-20000 20.000 508.00 72 GPL-22000 OPL-22000 BPL-22000 RPL-22000 22.000 558.80 72 GPL-24000 OPL-24000 BPL-24000 RPL-24000 24.000 609.60 72 GPL-36000 OPL-36000 BPL-36000 RPL-36000 36.000 914.40 72

PART PART PART PART WIDTH WIDTH ROLL LENGTH NUMBER NUMBER NUMBER NUMBER INCHES MILLIMETERS (YARDS)

PLOTTING TAPESFor our customers with their own plotting capabilities we offer all our tapes on a liner. Can be used in vinyl cutting machines to create in-house die cuts. Material can be purchased in widths ranging from 6” to 36”. CFS can offer most tapes on a release liner – inquire with us for products or sizes not listed below. Please refer to individual tapes for specifications.

POLYESTER TAPES GREEN ORANGE BLUE RED

HTBVL-6000 KPTL-6000 KPT2L-6000 HTCL-6000 6.000 152.40 36/60 (HTCL) HTBVL-8000 KPTL-8000 KPT2L-8000 HTCL-8000 8.000 203.20 36/60 (HTCL) HTBVL-9000 KPTL-9000 KPT2L-9000 HTCL-9000 9.000 228.60 36/60 (HTCL) HTBVL-10000 KPTL-10000 KPT2L-10000 HTCL-10000 10.000 254.00 36/60 (HTCL) HTBVL-12000 KPTL-12000 KPT2L-12000 HTCL-12000 12.000 304.80 36/60 (HTCL) HTBVL-14000 KPTL-14000 KPT2L-14000 HTCL-14000 14.000 355.60 36/60 (HTCL) HTBVL-16000 KPTL-16000 KPT2L-16000 HTCL-16000 16.000 406.40 36/60 (HTCL) HTBVL-18000 KPTL-18000 KPT2L-18000 HTCL-18000 18.000 457.20 36/60 (HTCL) HTBVL-20000 KPTL-20000 KPT2L-20000 HTCL-20000 20.000 508.00 36/60 (HTCL) HTBVL-22000 KPTL-22000 KPT2L-22000 HTCL-22000 22.000 558.80 36/60 (HTCL) HTBVL-24000 KPTL-24000 KPT2L-24000 HTCL-24000 24.000 609.60 36/60 (HTCL) HTBVL-36000 KPTL-36000 KPT2L-36000 HTCL-36000 36.000 914.40 36/60 (HTCL)

PART PART PART PART WIDTH WIDTH ROLL LENGTH NUMBER NUMBER NUMBER NUMBER INCHES MILLIMETERS (YARDS)

OTHER TAPES ON A LINER HIGH TEMP HIGH TEMP BLUE VINYL 1 MIL POLYIMIDE 2 MIL POLYIMIDE CREPE

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com48

TAPE

S &

DIE

CU

TS

HTBV-0375 0.375 9.53 36 96 HTBV-0500 0.500 12.70 36 48 HTBV-0750 0.750 19.05 36 48 HTBV-1000 1.000 25.40 36 36 HTBV-2000 2.000 50.80 36 24

HTGV-0250 0.250 6.35 60 96 HTGV-0500 0.500 12.70 60 48 HTGV-0750 0.750 19.05 60 48 HTGV-1000 1.000 25.40 60 36 HTGV-2000 2.000 50.80 60 24 HTGV-6000 6.000 152.40 60 8

PART WIDTH WIDTH ROLL LENGTH CASE NUMBER INCHES MILLIMETERS (YARDS) QUANTITY

PART WIDTH WIDTH ROLL LENGTH CASE NUMBER INCHES MILLIMETERS (YARDS) QUANTITY

HIGH TEMP BLUE VINYL TAPEThis tape provides the highest temperature performance of PVC tapes. Gives a more watertight seal than most other PVC options.

Product Features• Temperature Rating: 300° F / 149° C• Solvent resistant• High temperature performance for plating• Conforms easily to irregular shapes and curved surfaces• Can be die-cut upon requestConstruction• Polyvinyl chloride film backing• Rubber based adhesive• 5.5 Mil Total Thickness

HIGH TEMP GREEN VINYL TAPEA more temperature resistant PVC tape than our standard vinyl, it provides a very effective vapor and moisture barrier. An excellent plating tape.

Product Features• Temperature Rating: 220° F / 82° C• Good abrasion, impact and rupture resistance• Conforms easily to irregular shapes and curved surfaces• Used in plating applicationsConstruction• Matte surface, soft, polyvinyl chloride backing• Synthetic/natural rubber resin blend adhesive• 6 Mil Total Thickness

VINYL TAPESVinyl tapes are comprised of a PVC film coated with a rubber-based pressure sensitive adhesive. Excellent resistance to moisture, acids and alkalines, chemicals, oils, abrasion, and weathering. Often used for floor or aisle marking and plating. Contact us for sizes not shown.

Additional sizes available.

Additional sizes available.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 49

TAPES &

DIEC

UTS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

VINYL TAPESuperior quality, with a long shelf-life and write-on capability. It provides a very effective vapor and moisture barrier. It is highly conformable and resistant to aging, sun, water, fungus, bacteria, oil, acids, alkalies and corrosive chemicals.

Product Features• Temperature Rating: 180° F / 82° C• Good abrasion, impact and rupture resistance• Conforms easily to irregular shapes and curved surfaces• Available in 9 colors• Often used in plating applications• Used for color coding, lane marking and

safety coding to meet OSHA requirementsConstruction• Matte surface, soft, polyvinyl chloride backing• Synthetic/natural rubber resin blend adhesive• 6 Mil Total Thickness

NON-ADHESIVE YELLOW VINYLAs there is no adhesive, this is a very economical product. Application is quick and efficient. Our most popular tape for plating, it overlaps to form a water tight seal. Provides a very effective vapor and moisture barrier. It is highly conformable and resistant to aging, sun, water, fungus, bacteria, oil, acids, alkalines and corrosive chemicals.

Product Features• Temperature Rating: 180° F / 82° C• No adhesive, no residue• Good abrasion, impact and rupture resistance• Conforms easily to irregular shapes and curved surfaces• Overlap for a water tight seal• Used extensively for platingConstruction• Non-adhesive tape is a soft, polyvinyl chloride• 4 Mil Total Thickness

YELLOW

RED

GREEN

DARK GREEN

BLUE

PURPLE

BROWN

BLACK

GRAY

YELLOW/BLACK

AVAILABLE IN 10 COLORS

Additional sizes available.

NAV-0500 0.500 12.70 500 72 NAV-0750 0.750 19.05 500 48 NAV-1000 1.000 25.40 500 36 NAV-1500 1.500 38.10 500 32 NAV-2000 2.000 50.80 500 24 NAV-3000 3.000 76.20 500 16

PVC6-0500 0.500 12.70 36 72 PVC6-0750 0.750 19.05 36 48 PVC6-1000 1.000 25.40 36 36 PVC6-1500 1.500 38.10 36 24 PVC6-2000 2.000 50.80 36 24 PVC6-2500 2.500 63.50 36 12 PVC6-3000 3.000 76.20 36 12 PVC6-4000 4.000 101.60 36 8 PVC6-4500 4.500 114.30 36 8 PVC6-5000 5.000 127.00 36 8 PVC6-5500 5.500 139.70 36 8 PVC6-6000 6.000 152.40 36 8

PART WIDTH WIDTH ROLL LENGTH CASE NUMBER INCHES MILLIMETERS (FEET) QUANTITY

PART WIDTH WIDTH ROLL LENGTH CASE NUMBER INCHES MILLIMETERS (YARDS) QUANTITY

NEW

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com50

TAPE

S &

DIE

CU

TS

CUSTOM DIE CUTTING Utilizing state-of-the-art technology CFS can produce kiss cuts,

split liners, perforations, zoned adhesives, pull tabs, sheeting and kitting of die cuts of most pressure sensitive adhesives and

non-metallic materials.

AFT-0375 0.375 9.53 60 96 AFT-0500 0.500 12.70 60 72 AFT-0625 0.625 15.88 60 60 AFT-0750 0.750 19.05 60 48 AFT-0875 0.875 22.23 60 40 AFT-1000 1.000 25.40 60 36 AFT-1500 1.500 38.10 60 24 AFT-2000 2.000 50.80 60 24 AFT-3000 3.000 76.20 60 12 AFT-4000 4.000 101.60 60 8 AFT-5000 5.000 127.00 60 8 AFT-6000 6.000 152.40 60 8

PART WIDTH WIDTH ROLL LENGTH CASE NUMBER INCHES MILLIMETERS (YARDS) QUANTITY

ALUMINUM FOIL TAPEWith superior bonding to metals, it is designed to stick firmly to its own backing, adhering to a wide variety of surfaces. Aluminum Foil tape offers vapor barrier protection, waterproof sealing, heat reflection/dissipation, and reliable properties for masking in paint stripping and electroplating.

Product Features• Temperature Rating: 300° F / 149° C• Thermally conductive• Moisture and chemical resistant• Conforms easily to irregular shapes and curved surfaces• Used for Plating applicationsConstruction• 3 Mil Dead-soft Aluminum Foil • 2 Mil Aggressive Acrylic Adhesive • 5 Mil Total Thickness

FOIL TAPESFoil tapes consist of a metal-foil backing with a pressure sensitive adhesive. They are flame retardant and resist temperature, high humidity, exposure to UV rays and most chemicals. Recommended for Electroplating, Chrome and Nickel plating. CFS can slit any of our tapes to custom widths for same day shipment. We can also die cut any of our tapes into discs, donuts, squares or rectangles.

Additional sizes available.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 51

TAPES &

DIEC

UTS

TAPES &

DIEC

UTS

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

LFT-0375 0.375 9.53 36 24 LFT-0500 0.500 12.70 36 18 LFT-0625 0.625 15.88 36 15 LFT-0750 0.750 19.05 36 12 LFT-0875 0.875 22.23 36 10 LFT-1000 1.000 25.40 36 9 LFT-1250 1.250 31.75 36 6 LFT-1500 1.500 38.10 36 6 LFT-1750 1.750 44.45 36 6 LFT-2000 2.000 50.80 36 6 LFT-2500 2.500 63.50 36 2 LFT-3000 3.000 76.20 36 2 LFT-4000 4.000 101.60 36 2 LFT-5000 5.000 127.00 36 2 LFT-6000 6.000 152.40 36 2

PART WIDTH WIDTH ROLL LENGTH CASE NUMBER INCHES MILLIMETERS (YARDS) QUANTITY

LEAD FOIL TAPEThis tape is designed to offer excellent quick stick and ultimate adhesion with excellent release even with long bath times. Due to the density, weight and malleability of the lead foil, it makes an excellent choice for weighting and balancing, particularly for golf clubs where weight and conformability are crucial for club performance.

Product Features• Temperature Rating: 255° F / 124° C• Electrically conductive• Acid resistant• Conforms easily to irregular shapes and curved surfaces • Preferred for Nickel and Chrome platingConstruction• Lead Foil Backing• Aggressive Rubber Adhesive• 6 Mil Total Thickness

Additional sizes available.

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com52

TAPE

S &

DIE

CU

TS

ALUMINUM/LEAD FOIL DISCS DONUTS, SQUARES AND RECTANGLES ALSO AVAILABLE

Additional sizes available.

Additional sizes available. ALUMINUM FOIL LEAD FOIL DISCS DISCS

AFD0125 LFD-0125 0.125 3.18 2000 AFD0156 LFD-0156 0.156 3.96 2000 AFD0187 LFD-0187 0.187 4.75 2000 AFD0218 LFD-0218 0.218 5.54 2000 AFD0250 LFD-0250 0.250 6.35 2000 AFD0281 LFD-0281 0.281 7.14 2000 AFD0312 LFD-0312 0.312 7.92 2000 AFD0375 LFD-0375 0.375 9.53 2000 AFD0400 LFD-0400 0.400 10.16 2000 AFD0437 LFD-0437 0.437 11.10 2000 AFD0500 LFD-0500 0.500 12.70 2000 AFD0562 LFD-0562 0.562 14.27 2000 AFD0625 LFD-0625 0.625 15.88 2000 AFD0687 LFD-0687 0.687 17.45 1000 AFD0750 LFD-0750 0.750 19.05 1000 AFD0812 LFD-0812 0.812 20.62 1000 AFD0875 LFD-0875 0.875 22.23 1000 AFD0937 LFD-0937 0.937 23.80 1000 AFD1000 LFD-1000 1.000 25.40 1000 AFD1062 LFD-1062 1.062 26.97 500 AFD1125 LFD-1125 1.125 28.58 500 AFD1187 LFD-1187 1.187 30.15 500 AFD1250 LFD-1250 1.250 31.75 500 AFD1312 LFD-1312 1.312 33.32 500 AFD1375 LFD-1375 1.375 34.93 500 AFD1437 LFD-1437 1.437 36.50 500 AFD1500 LFD-1500 1.500 38.10 500 AFD1625 LFD-1625 1.625 41.28 500 AFD1750 LFD-1750 1.750 44.45 500 AFD1812 LFD-1812 1.812 46.02 500 AFD1875 LFD-1875 1.875 47.63 500 AFD2000 LFD-2000 2.000 50.80 500 AFD3000 LFD-3000 3.000 76.20 250 AFD4000 LFD-4000 4.000 101.60 250 AFD5000 LFD-5000 5.000 127.00 250 AFD5250 LFD-5250 5.250 133.35 250 AFD6000 LFD-6000 6.000 152.40 250

PART PART DIAMETER DIAMETER ROLL NUMBER NUMBER INCHES MILLIMETERS QUANTITY

Lead FoilDiscs

Aluminum Foil Discs

CONVERTING SERVICESCFS provides precision slitting from 0.062”, die cutting, rewinding

and laminating services for most masking and industrial tapes.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 53

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

DOUBLE SIDED TAPESDouble Sided PET Polyester Tape ...................................54Double Sided Flatback Paper Tape .................................54Double Sided PVC Tape....................................................54High/Low Tack Double Sided PET Tape ..........................54Double Sided Polyethylene Foam Tape .................... 54-55Double Sided PET Tape ....................................................55Ultra High Bond Double Sided Tape ...............................553MTM VHB Tapes with All-Acrylic Construction ...............55

PTFE COATED FIBERGLASS TAPESPremium PTFE Tapes .........................................................56Standard PTFE Tapes .........................................................56PTFE Coated Fabric ...........................................................56

PRINTED CIRCUIT BOARD TAPESHigh Temp Hot Air Leveling Tape ....................................575 Mil Polyimide Tape..........................................................57Red Polyester Plating Tape ...............................................573MTM Circuit Board Plating Tape 851 ..............................57

FLAME SPRAY, BLASTING & DUCT TAPESDouble Sided Glass Cloth Tape .......................................58Fiberglass Cloth with Aluminum Foil Tape .....................58High Velocity Oxygen Fuel Tape ......................................58Pipe Wrap and Blasting Protection Tape ................... 58-59Premium Silicone Rubber Coated Fiberglass Tape .......58Silicone Rubber Coated Fiberglass Tape ........................583MTM Impact Stripping Tape 500 .....................................593MTM All Purpose Duct Tape DT8 .....................................593MTM Heavy Duty Duct Tape DT11 ...................................593MTM Super Duty Duct Tape DT17 ...................................59

INDUSTRIAL TAPES

WE HAVE YOU COVEREDBesides standard tapes used for surface masking during painting processes, we also carry an

extensive line of industrial tapes used for specialties such as PCB masking, heat sealing, and blasting/

flame spray. Double sided tapes are often used for permanent adhesion of parts during the assembly

process. Our team is well versed in the proper selection of these tapes for your application. We have

access to hundreds of tapes not listed here through our partnership with 3M™ and other suppliers.

Most of these tapes can be die cut for easy application!

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com54

IND

UST

RIA

L TA

PES

DOUBLE SIDED TAPESThese tapes have exposed adhesive on each side. When there is material between each adhesive side it’s deemed double sided tape. Used in bonding, cushioning, mounting and vibration control. Available with rubber or acrylic adhesive. Can be slit to order in custom widths. Contact us for specific use cases.

DOUBLE SIDED PET POLYESTER TAPE D4003 D4003 is a general purpose 3 Mil PET double sided tape with an acrylic solvent-based pressure sensitive adhesive which offers 2 different adhesion levels; the open side is coated with higher adhesion providing quick bonding results. Ideal for foam lamination and a wide variety of substrates where high adhesion level is required. An excellent general purpose, economical double-sided tape that works best on high and medium surface energy materials. Operates at temperatures to 212°F/120°C.

DOUBLE SIDED FLATBACK PAPER TAPE D4055D4055 Double Sided Flatback Paper Tape is 6 Mil thick and is used for manufacturing, repairing and replacing golf grips. Made with bleached flatback paper tape and coated on both sides with high shear resistant natural rubber and resin adhesive, it bonds well to nearly any material. Aggressive natural rubber adhesive has excellent initial tack. Operates at temperatures to 200°F/93°C.

DOUBLE SIDED PVC TAPE D4085D4085 Double Sided PVC Tape is 8.5 Mil with an un-plasticized PVC film with a high peel adhesion acrylic adhesive on both sides. It features a mustard color, glassine release paper liner. This double-sided tape offers permanent, secure bonding to most surfaces including wood, glass, cement and plastics. Operates at temperatures to 212°F/120°C.

HIGH/LOW TACK DOUBLE SIDED PET TAPE D4210 A 3.5 Mil clear polyester film differentially coated with a removable (low tack) and permanent (high tack) solvent acrylic adhesive. The liner side is coated with a low tack adhesive system which exhibits moderate adhesion to a variety of surfaces but has excellent removability. The exposed side is coated with an aggressive, high tack, peel, and shear permanent acrylic adhesive. Excellent adhesion to metals, glass, films, paper, and some treated polyolefins, the removable adhesive leaves no ghosting on glass. Good resistance to solvents, chemicals, mild acids, oil, grease, UV exposure and heat. Operates at temperatures to 212°F/120°C.

DOUBLE SIDED POLYETHYLENE FOAM TAPE F032/F062/F125 Our Acrylic Adhesive Double Sided Polyethylene Foam Tape is available in 3 different thicknesses – 1/32”, 1/16” or 1/8”. This white tape has a high performance acrylic solvent-based adhesive that offers high long-term tack, excellent shear strength and peel adhesion. Works on a wide variety of substrate surfaces for bonding & fastening of nameplates, signs, plaques, hooks, etc. Also used for long-term mounting of automotive trim and permanent bonding and repair of metal. Operates at temperatures to 194°F/90°C.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 55

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

VHB 3MTM VHB TAPES WITH ALL-ACRYLIC CONSTRUCTION3M™ VHB™ 4952 is a white, 0.045” (1.1 mm) tape which utilizes a low surface energy adhesive on both sides of a firm, acrylic foam core. This synthetic adhesive bonds to a variety of smooth surfaces, including lower surface energy substrates such as many plastics and powder coated paints. Applications for this tape include stiffener bonding, sealing polycarbonate lens over LCD, windows to painted control panels and mounting vinyl wiring ducts and conduit channels. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. 3M™ VHB™ 4952 offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Operates long-term at temperatures of up to 160°F/71°C with short excursions to 200°F/93°C.

3M™ VHB™ 4952 is a black, 0.025” (0.6 mm) tape with a modified acrylic adhesive and a very conformable, acrylic foam core. This provides an extraordinarily strong double-sided foam tape that adheres to a broad range of substrates including aluminum, stainless steel, galvanized steel, composites, plastics, acrylic, polycarbonate, ABS, painted or sealed wood and concrete. Commonly used in applications across a variety of markets including transportation, appliance, electronics, construction, sign & display and general industrial. Specifically designed for good adhesion to high, medium and lower surface energy plastics and paints, metals and glass. Applications for this tape include bonding and sealing polycarbonate lens over LCD, signage and windows to post-painted control panels. Reliably bonds a variety of materials with strength and speed for permanent applications. Operates long-term at temperatures of up to 250°F/121°C with short excursions to 300°F/149°C.

DOUBLE SIDED POLYETHYLENE FOAM TAPE F032RRubber Adhesive Double Sided Polyethylene Foam (F032R) is a 1/32” tape available in black or white. This double sided tape offers good shear strength and excellent initial tack. Rubber adhesives offer the maximum holding power in the shortest amount of time. Quickly bonds to paper, paper board and fiber based products. Used for temporary placement of component die cuts for assembly, joining & mounting of nameplates and for POP displays and graphics. Operates at temperatures to 122°F/50°C.

DOUBLE SIDED PET TAPE U5006/U5008 PET double sided tapes with an acrylic, solvent-based pressure sensitive adhesive on both sides. Available in a 6.5 Mil or 8 Mil thicknesses. Provides exceptional shear strength, good adhesion and high initial tack allowing for an immediate and permanent bond to a variety of surfaces. Adheres to irregular, porous and LSE surfaces. Excellent resistance to plasticizer migration, solvents, chemicals, UV degradation and heat. Used for mounting on ABS and PP plates for industrial applications, self-adhering and joining of rubber and EPDM and fastening of decorative trims. Operates at temperatures to 356°F/180°C.

ULTRA HIGH BOND DOUBLE SIDED TAPE U5045A white, 45 Mil tape with a foamed acrylic carrier and an aggressive pressure sensitive acrylic adhesive on both sides. Ideal for structural bonding applications in the transportation industry. Used for bonding of plastic & wooden window glazing bars, fixing architectural cladding panels. Replaces rivets, welds, screws, nails and liquid adhesives to adhere permanently; absorbs impacts, vibrations and noise. Excellent wind, weather, UV, and water resistance. Conforms to thermal expansion and contraction for a flawless bond. Temperature to 212°F/100°C long term, up to 320°F/160°C short term.

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com56

IND

UST

RIA

L TA

PES

PTFE COATED FIBERGLASS TAPESPTFE coated fiberglass tapes and fabrics are lightweight, durable and non-flammable. Providing a non-stick surface, weather resistance and electrical/thermal insulation, they are chemical and temperature resistant. The fiberglass cloth provides dimensional stability, while the coating of PTFE provides quick-release surface. The Silicone adhesive has good chemical resistance, removes cleanly, and is perfect for extreme temperatures. The tape is non-toxic, odorless, tasteless for use in food processing, packaging, and handling.

These properties make this tape superb for heat-sealing. Use of this tape on the heating element prevents sticking of molten plastic/polyethylene. PTFE (or Teflon™ - the Trademarked name) coated heat sealer tape should be the most consumable part for a heat sealer. Replacing tape when burn-throughs and excessive residue build up occurs will increase the life of other sealer parts. CFS can slit or die-cut these to any size. Temperature Rating - to 500°F/260°C.

Product Features• Available in 4 stock thicknesses - 3, 4, 6 and 10 Mil• Widely used in packaging, heat molding, laminating, sealing and electrical industries• Often used for heat sealing or roller wrap tapes• Excellent dimensional stability, tensile strength and durability• High heat resistance, chemical inertness; outstanding hydrophobic and dielectric properties

PREMIUM PTFE TAPES 6105/6106/6110Our Premium PTFE tapes are impregnated fiberglass with the highest percent of PTFE coating. This provides a longer service life for the tape. Designed for extreme requirements where superior release and extended life are critical. Available with a liner.

STANDARD PTFE TAPES 6203/6205/6206/6210Our Standard PTFE tapes are impregnated fiberglass with a PTFE coating. Similar to our Premium Grade 61xx, it has a lower percent of PTFE coating affording a cost advantage over the premium heat-sealing tape. Our most popular PTFE tapes. Available with a liner.

PTFE COATED FABRIC 20-3/20-5/20-6/20-10Our Premium PTFE fabrics are impregnated fiberglass with the highest percent of PTFE coating. As this product is non-adhesive, it provides an economical option for PTFE coated fiberglass. Applications include release sheets on heat-sealing machines and laminate presses, non-stick surfaces for adhesives and food products, and thermal insulation for high temperature and chemical resistant applications.

(Shown with liner)

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 57

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

ISO 9001: 2015 CERTIFIED We believe in the continued improvement of our organization,

so we may provide our customers with the highest level of service expected from a partner.

PRINTED CIRCUIT BOARD TAPESPrinted circuit board (PCB) tapes are used to mask gold fingers during the wave solder process and other electronic manufacturing applications. They are very conformable and withstand high temperatures. Providing excellent chemical resistance, they remove cleanly. These tapes can be slit or die cut to your specifications.

HIGH TEMP HOT AIR LEVELING TAPE HALROur Red High Temperature Hot Air Leveling Tape (HALR) combines PET and crepe backings with a silicone adhesive. It is applied to mask gold fingers, tab areas and other sections of printed circuit boards (PBCs) during the hot air leveling process. The silicone adhesive is specially formulated to hold down and protect the gold fingers during rigorous HAL operations yet remove cleanly from the board without splitting or leaving adhesive residue even after a long delay in removal after wave soldering. A proven mask in double wrap applications. This tape prevents plating solution undercutting, stands up to multiple operating cycles and reduces rework. Excellent temperature and chemical resistance. Temperature Rating: 480°F/250°C in 5 seconds.

5 MIL POLYIMIDE TAPE KPT5Our 5 Mil Polyimide Tape is manufactured from commercial, heavy grade Polyimide film with a special silicone adhesive. Like our other Polyimide tapes, it has outstanding thermal resistance and excellent insulating properties. This heavier grade tape is used where toughness, puncture resistance and flame retardance are important. For protection of gold fingers during wave soldering, it can also be used as a ground barrier and phase insulation in high performance coils, as an outer wrap on small bobbin wound coils and on form wound coils for traction motors. Temperature Rating: 500°F/260°C.

RED POLYESTER PLATING TAPE RPTBOur RPTB has a PET backing with silicone adhesive. Red Plating tape is applied to circuit boards during the tin/lead stripping and gold plating operations. The Polyester backing reduces stretch and recovery of tape and associated uneven stop-off line while the thick adhesive coating reduces undercutting, blocking out solutions between fingers. This tape generally performs better when no ovens are used to heat tape and boards. Temperature Rating: 425°F/218°C.

3MTM CIRCUIT BOARD PLATING TAPE 8513M™Circuit Board Plating Tape 851 is specifically designed for printed circuit board masking during electroplating, solder stripping and precious metal plating of fingers. The Polyester backing reduces stretch and recovery of tape associated with uneven stop-off line. The thick adhesive coating reduces undercutting because adhesive blocks out solutions between fingers. Temperatures up to 170°F/76°C.

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com58

IND

UST

RIA

L TA

PES

FLAME SPRAY, BLASTING & DUCT TAPESThermal spray tapes form a protective mask for metal or ceramic plasma spraying, arc spraying, metallizing, HVOF and grit blasting. Engineered to aggressively adhere, flame spray masking tapes ensure sharp edges & remove cleanly even after high temperature exposure.

Blasting Tapes are protective masking tapes for use during plastic media blast (PMB), blast (dry strip paint removal) or other shot peen processes. They prevent small particles of blast media and other debris from infiltrating and damaging sensitive surfaces, components and control systems.

DOUBLE SIDED GLASS CLOTH TAPE D4700Our 8 Mil D4700 is manufactured from heat resistant fiberglass cloth with a high temperature silicone adhesive on both sides. This double-sided glass cloth tape is ideal as an under wrap in demanding coating and masking applications. Used for metallizing and plasma spray masking, it can also be used to hold components on circuit boards, and an inner wrap for coils and transformers. The silicone adhesive will remove cleanly even after high temperature exposure. Temperature Rating: 500°F/260°C.

FIBERGLASS CLOTH WITH ALUMINUM FOIL TAPE GF1310GF1310 is a 7.5 Mil tape combining strong fiberglass cloth with aluminum foil and is coated with special silicone adhesive. With high reflection to radiant heat and excellent flexibility, it is suitable for the plasma spray masking, grit blasting as well as for applications requiring resistance to extreme temperatures. The aluminum foil provides excellent reflective & conductive characteristics while the silicone as excellent adhesion in high temperature exposure. Temperature Rating: 500°F/260°C.

HIGH VELOCITY OXYGEN FUEL TAPE HVOFOur 18 Mil HVOF tape is a laminate of blue silicone rubber, fiberglass fabric and aluminum with a pressure sensitive silicone adhesive. Designed for severe duty applications including HVOF, it will not flag during HVOF operations. The HVOF process is made up of two main steps, grit blast and HVOF coating. This tape is designed to withstand the entire HVOF process and allows for a single masking application. The high temperature silicone adhesive will release cleanly. Temperature Rating: 500°F/260°C.

SILICONE RUBBER COATED FIBERGLASS TAPE WR1350An 11 Mil white silicone rubber coated fiberglass fabric with a silicone adhesive. Designed as a one-step masking tape, it is tough and resists abrasion from blasting impact and the high temperature adhesive withstands the plasma flame spray process. One step masking saves time and money with fewer layers used and prevents bridging during the metalization process. This tape has excellent adhesion yet removes cleanly. Can be die cut for ease of application. Temperature Rating: 500°F/260°C.

PREMIUM SILICONE RUBBER COATED FIBERGLASS TAPE SRGFA premium 12 Mil silicone rubber coated fiberglass fabric with an aggressive silicone adhesive. Designed as a one-step masking tape for use during plasma flame spraying, the silicone rubber is tough and resists abrasion from blasting impact. A thicker, higher tack tape than most other thermal spray tapes allows it to easily conform to very complex shapes. Temperature Rating: 500°F/260°C.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 59

IND

USTRIA

L TAPES

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

HEAVY DUTY SANDBLASTING & STENCIL TAPE SPVCSPVC is a 20 Mil pipe wrap and surface protection tape for sandblasting. Provides electrical protection; protects pipe joints, conduit couplings for overhead or direct buried applications, excellent masking tape for hard chrome plating and anodizing. Provides an effective vapor and moisture barrier. It is highly conformable and resistant to aging, sun, water, fungus, bacteria, oil, acids alkalies and corrosive chemicals. It provides good abrasion, impact and rupture resistance. Rubber adhesive leaves a sharp paint line. Soft, black matte PVC backing can be die-cut by CFS for many applications. Temperature Rating: 176°F/80°C.

3MTM IMPACT STRIPPING TAPE 3M5003M™ Impact Stripping Tape 500 is 36 Mil thick and designed for masking and surface protection during dry media blast paint removal. Specially formulated rubber backing designed to withstand impact against common blasting media including aluminum oxide, steel shot, glass bead, and plastic media. Cuts easily, smoothly and cleanly, making it an optimal tape for masking fine details or creating small lettering. The paper release liner is coated with a silicone film for easy removal commonly sought for die cutting applications. With its stand-out color and thick backing, the tape leaves highly visible cut lines. The tape’s acrylic adhesive provides a strong bond on many surfaces including metal, glass, wood and many plastic. Operates at temperatures up to 120°F/49°C.

3MTM ALL PURPOSE DUCT TAPE 3MDT83M™ All Purpose Duct Tape is 8 Mil and has a natural rubber adhesive and water-resistant polyethylene backing. It offers high instant adhesion coupled with maximum conformability, making it an ideal tape for dealing with contoured surfaces. It can be applied in temperatures as low as 40°F/4°C. It is the most stretchable of 3M’s duct tapes and bonds firmly to a number of substrates — including plastic, glass and sealed concrete. Temperatures up to 150°F/66°C for up to 30 minutes.

3MTM HEAVY DUTY DUCT TAPE 3MDT113M™ Heavy Duty Duct Tape is 11 Mil and designed to provide a formidable, reliable solution for everyday challenges and adheres to numerous substrates, including plastic. Constructed of polyethylene film laminated to cloth with a natural rubber adhesive, this tough tape resists curling and tears off the roll cleanly for a variety of applications. The water-resistant polyethylene backing resists wear and light abrasion. Provides a moisture-resistant seal in many containment situations, such as attaching heavy poly draping and pipe sealing. Temperatures up to 150°F/66°C for up to 30 minutes.

3MTM SUPER DUTY DUCT TAPE 3MDT173M™ Super Duty Duct Tape is 17 Mil and constructed of polyethylene film laminated to cloth with a natural rubber adhesive. This very thick and strong tape resists curling and tears off the roll cleanly even when used in the most demanding jobs and is designed to provide a maximum-strength, long-lasting solution for the ultimate applications. Despite it being the thickest of 3M’s duct tapes, its polyethylene backing can be torn from the roll to stick instantly. It bonds firmly to many surfaces including plastic, glass and sealed concrete. It is ideal for jobs requiring strength, wear resistance or protection of covered surfaces such as media blasting. Temperatures up to 150°F/66°C for up to 30 minutes.

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com60

IND

UST

RIA

L TA

PES

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 61

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

3M TAPES

WE HAVE YOU COVEREDCFS is a 3MTM Preferred Converter. 3MTM only recognizes elite converting companies that consistently

exceed others in capabilities, experience, quality and customer service with this designation. We are

proud to be among this select group. We also have access to material experts, competitive pricing

and product offerings from 3MTM that adds value to our customers.

201+ 3MTM General Use Masking Tape ...........................62213 3MTM High Temp Performance Masking Tape .........62 218 3MTM Fine Line Tape ...................................................62231 3MTM High Performance Paint Masking Tape .........62234 3MTM General Purpose Masking Tape ......................62250 3MTM Flatback Masking Tape .....................................62301+ 3MTM Performance Yellow Masking Tape ..............63401+ 3MTM High Performance Green Masking Tape .....63421 3MTM Lead Foil Tape ...................................................63425 3MTM Aluminum Foil Tape ..........................................63467/468MP 3MTM Adhesive Transfer Tape ......................63470 3MTM Electroplating Tape ...........................................64471 3MTM Vinyl Tape ...........................................................64

501+ 3MTM Specialty High Temperature Purple Masking Tape ..................................................64

764 3MTM General Purpose Vinyl Tape ............................64851 3MTM Circuit Board Plating Tape ...............................642308 3MTM General Purpose Masking Tape ....................642364 3MTM Performance Masking Tape ...........................652380 3MTM Performance Masking Tape ...........................652525 3MTM Orange Performance Flatback Tape ............652693 3MTM High Performance Masking Tape ..................658991 3MTM Blue Polyester Tape ........................................658992 3MTM Green Polyester Tape .....................................668985L 3MTM Anodization Tape ..........................................66VHB 3MTM VHB Tapes With All-Acrylic Construction ......67

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com62

3M T

APE

S

NEW

NEW

NEW

201+ 3MTM GENERAL USE MASKING TAPE3M™ General Use Masking Tape 201+ is a tan colored crepe paper masking tape for holding, bundling, sealing, non-critical masking applications. Rubber-based adhesive sticks to a variety of surfaces. Smooth and conformable crepe paper backing is easy to handle, apply, and remove in one piece. Temperatures up to 200°F/93°C for 30 minutes.

213 3MTM HIGH TEMP PERFORMANCE MASKING TAPE3M™ High Performance Masking Tape 213 has a comparatively high resistance to heat in masking and holding applications. It has proven to be among the cleanest to remove when tested across a variety of surfaces. This tape is generally the most transfer-resistant adhesive of all the 3M™ paper tapes, as the firm adhesive does not anchor itself as softer adhesives often do. This tape has the ability to exceed clean-removal performance of most tapes on challenging, anodized treated metal surfaces. Temperatures up to 350°F/177°C for 30 minutes.

218 3MTM FINE LINE TAPE3M™ Fine Line Tape 218 is a high-performance polypropylene plastic tape that has a low profile and high adhesion for use in painting long straight lines and sweeping curves where a crisp, sharp paint line is desired. Often used as a layout tape for high value, multi-color and custom painted graphics. Features a natural rubber pressure adhesive capable of delivering the high instant adhesion necessary for critical, large-scale paint applications. The polypropylene backing is stiffer than vinyl fine line tapes, yet conforms easily around corners. Resists heat in bake cycles that reach 250°F/121°C for up to 30 minutes.

2313MTM HIGH PERFORMANCE PAINT MASKING TAPE3M™ Paint Masking Tape 231 is a premium, high-performance crepe paper masking tape designed to meet aerospace needs in most painting applications, including the use of multiple bake cycles. This smooth masking tape embodies all the features that are desirable in a paint masking tape and designed specifically for the aerospace market. As a premium grade masking tape, it has the benefit of paint flake resistance that reduces contamination and potential rework, resulting in a professional paint job. A special backside treatment provides a smooth unwind for easy handling and reduced waste. It is easy to tear, which aids in handling, yet strong enough to resist slivering, providing “user friendly,” one-piece removal. Temperature - up to 300°F/149°C for 30 minutes.

234 3MTM GENERAL PURPOSE MASKING TAPE3M™ General Purpose Masking Tape 234 features a strong backing and a less aggressive rubber adhesive. It is one of our most popular general purpose crepe backed masking tapes and performs exceptionally well in most indoor applications, having proven itself especially useful in window and door manufacturing. Performs well in paint bake operations up to 250°F/121°C for 30 minutes.

250 3MTM FLATBACK MASKING TAPE3M™ Flatback Masking Tape 250 features a rubber adhesive that instantly adheres to a wide variety of surfaces. It detaches easily and provides clean removal, making it ideal for paint adhesion testing applications. Special flatback paper backing has good tensile strength to resist breakage. Temperatures up to 125°F/52°C for 30 minutes.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 63

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

301+ 3MTM PERFORMANCE YELLOW MASKING TAPE3M™ Performance Yellow Masking Tape 301+ was designed using a proprietary solvent-free adhesive. The tape sticks instantly to most surfaces, including metal, rubber, glass and plastic, as well as EPDM-type rubber moldings while removing cleanly in one piece. High-strength, yellow crepe-paper backed tape is ideal for paint masking applications in specialty vehicle, aerospace, automotive and industrial markets where strong holding performance is required. Withstands surface temperatures up to 225°F/107°C for 30 minutes.

401+ 3MTM HIGH PERFORMANCE GREEN MASKING TAPE3M™ High Performance Green Masking Tape 401+ was designed using a proprietary solvent-free synthetic/natural rubber adhesive. It is a green colored crepe paper masking tape for critical paint masking applications in the automotive, specialty vehicle, and industrial markets where excellent holding and high temperature performance are required. Removes cleanly in one piece with no adhesive residue. Withstands surface temperatures up to 250°F/121°C for 30 minutes.

421 3MTM LEAD FOIL TAPE3M™ Lead Foil Tape 421 offers good initial grab and a long-lasting bond that removes cleanly from most surfaces. It is an extremely conformable and pliable tape that can be formed into detailed and intricate shapes and patterns. The lead foil backing can be burnished to fully cover the adhesive and allow full contact of the lead foil to the metal base. This metal to metal contact results in a continuation of the electrical path, reducing build-up at the adhesive interface. It is formulated to be electrically and thermally conductive and carries a strong acid and base resistance, making it ideal for electroplating or as a radiation barrier. Temperature Rating up to 225°F/106C°.

425 3MTM ALUMINUM FOIL TAPE3M™ Aluminum Foil Tape 425 combines a dead soft aluminum foil backing with a transparent acrylic adhesive. The very low moisture vapor transmission rate makes these tapes a good sealant. The acrylic adhesive, combined with the durable aluminum backing, offers ideal properties for long serviceable life in and outdoors. Good candidate as a maskant in electroplating of aluminum because it will not contaminate the bath. Aluminum backing provides excellent reflection of both heat and light. Temperature Rating – up to 300°F/149°C for 30 minutes.

467/468MP 3MTM ADHESIVE TRANSFER TAPE3M™ Adhesive Transfer Tapes provide outstanding adhesion to metal and high surface energy plastics. 200MP adhesive delivers excellent shear strength to resist slippage and edge lifting. The tape is temporarily repositionable for placement accuracy. It also performs well after exposure to humidity and hot/cold temperatures. A PCK layflat liner helps prevent curling and buckling in the liner. Available in 2 Mil and 5 Mil thicknesses. Excellent short-term heat resistance and will continue to perform at temperatures up to 400°F/204°C.

ALL 3MTM STOCK CAN BE CUT TO SIZE

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com64

3M T

APE

S

470 3MTM ELECTROPLATING TAPE3M™ Electroplating Tape 470 is designed to withstand intense and difficult conditions associated with the electroplating and anodizing processes. Built on a flexible vinyl backing that conforms to irregular or curved surfaces, it is resistant to most common solvents and has excellent resistance to chemicals used in electroplating and anodizing. Operates at temperatures of up to 170°F/76°C.

471 3MTM VINYL TAPE3M™ Vinyl Tape 471 is a versatile tape that provides long-lasting floor and safety marking, sharp paint lines on complex jobs and reliable seals or repairs in a variety of industries. Designed with unique stretch properties, this tape conforms to rough, irregular, curved and convex surfaces while remaining stretched and without lifting after application. The rubber adhesive offers quick stick and excellent holding strength on many substrates. Conformability, instant adhesion and clean removal all make it an exceptional choice for temporary surface protection, general purpose paint masking and decorating. Available on a liner. Operates at temperatures of up to 170°F/76°C.

501+ 3MTM SPECIALTY HIGH TEMPERATURE PURPLE MASKING TAPE

3M™ Specialty High Temperature Purple Masking Tape 501+ is designed for critical paint masking applications in the aerospace, automotive, specialty vehicle, and industrial markets where excellent holding and high temperature performance are required. The tape sticks instantly to most surfaces, including metal, rubber, glass and plastic, as well as EPDM-type rubber moldings. The high-strength crepe-paper backing conforms to irregular surfaces, resists bleed through from most industrial paint systems, improves visibility during the paint masking process, and helps achieve sharp paint lines. It is easy to tear yet strong enough to resist slivering, providing one-piece removal. Temperatures up to 300°F/149°C for 30 minutes.

764 3MTM GENERAL PURPOSE VINYL TAPE3M™ General Purpose Vinyl Tape 764 is suited for a variety of coding, temporary surface protection, bundling, marking and protection applications. The rubber adhesive offers quick stick and good holding strength on many substrates. Unlike messy paint solutions, this vinyl tape is quick to install and easy to clean-up. Conformability and instant adhesion makes it a good choice for marking and warning applications on floors, equipment, walls and pipes. It is an economical vinyl tape option designed to resist wear, weathering and light abrasion while providing good instant adhesion to many surfaces. Available in an array of distinctive colors, as well as transparent.

851 3MTM CIRCUIT BOARD PLATING TAPE3M™Circuit Board Plating Tape 851 is specifically designed for printed circuit board masking during electroplating, solder stripping and precious metal plating of fingers. The Polyester backing reduces stretch and recovery of tape associated with uneven stop-off line. The thick adhesive coating reduces undercutting because adhesive blocks out solutions between fingers. Temperatures up to 170°F/76°C.

2308 3MTM GENERAL PURPOSE MASKING TAPE3M™ Masking Tape 2308 is a general-purpose crepe paper masking tape designed with a natural rubber adhesive that sticks easily and instantly. It provides good holding power that resists lifting or curling and is an easy-to-use solution for a wide variety of applications. Temperatures up to 250°F/121°C for 30 minutes.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 65

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

NEW

2364 3MTM PERFORMANCE MASKING TAPE3M™ Performance Masking Tape 2364 offers good adhesion at a wide range of temperatures in paint bake operations. This economy masking tape performs well in both general painting and paint bake operations at high temperatures. With superior adhesion to metal, rubber, glass and plastic it is an economical choice for holding, protecting, and bundling applications, as well as many painting operations, particularly those in the industrial and manufacturing fields. Temperatures up to 300°F/149°C for 30 minutes.

2380 3MTM PERFORMANCE MASKING TAPE3M™ Performance Masking Tape 2380 was designed for industrial use where the best possible paint line is desired and drying conditions range from air dry to oven bake. The smooth, strong, mini-crepe paper masking tape holds fast, removes easily and will give you great performance for most paint masking applications. Performs well in paint bake operations up to 325°F/162°C for 30 minutes.

2525 3MTM ORANGE PERFORMANCE FLATBACK TAPE3M™ Orange Performance Flatback Tape 2525 has a rubber adhesive and is used in holding, splicing or masking applications where high adhesion strength, high temperature capability and high backing strength are required. It has excellent adhesion and backing strength levels and is resistant to moist conditions. The colored backing provides high visibility and is easily picked up by sensing equipment. Temperatures up to 300°F/149C° for 1 hour.

2693 3MTM HIGH PERFORMANCE MASKING TAPE3M™ High Performance Masking Tape 2693 is formulated to provide a latex-free alternative for use in sensitive environments, such as healthcare. Performs very well in large scale paint masking applications, offering some the best holding power and heat resistance while proving to be among the easiest to unwind. It provides easy, clean removal, whether warm or cold, from most surfaces without adhesive transfer. Designed for automotive, truck and bus applications where very aggressive room temperature and high temperature holding is required. Temperatures up to 325°F/165°C for 30 minutes.

8991 3MTM BLUE POLYESTER TAPE3M™ Polyester Tape 8991 is a thin and conformable translucent blue polyester tape with a pressure sensitive silicone adhesive. This high-temperature tape is also designed with a thin polyester backing that resists shrinking, curling, tearing and edge lifting, offering reliable masking and consistent results. This tape features sharp, clean paint lines and provides excellent thermal, abrasion and chemical resistance while maintaining flexibility. Removes without leaving behind adhesive residue, for a clean finish. Temperatures up to 400°F/204°C.

ALL 3MTM STOCK CAN BE CUT TO SIZE

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com66

3M T

APE

S

NEW

8992 3MTM GREEN POLYESTER TAPE3M™ Polyester Tape 8992 is a dark green polyester tape with silicone adhesive. Ideal for masking in high temperature applications, the translucent green backing is tear resistant. The silicone adhesive allows this tape to function well in masking for powder coating to provide sharp paint lines. It removes cleanly and in one-piece from most surfaces, avoiding slivering and breaking. With excellent chemical resistance, this tape works effectively in chemical processes and demanding work conditions, such as anodizing. The pressure sensitive silicone adhesive performs under a broad range of temperatures to 400°F/204°C.

8985L 3MTM ANODIZATION TAPE 3M™ has created a tape specifically designed to withstand the harsh chemicals used during chromic acid anodizing replacing the complex, messy liquid masking and the unpleasant odors involved. 3M™ Anodization Masking Tape 8985L has a tough polyester carrier to stand up to chromic acid anodization baths (Type I anodization). Provides sharp masking edges, minimizing leakage and the need for rework, and can be used with or without chemical film on a variety of aluminum and other metal alloys. It features a non-silicone rubber adhesive to minimize the risk of silicone contamination impacting downstream processes such as bonding or paint adhesion. Supplied on a liner, it can easily be die cut for faster masking – eliminating hand trimming.

The transparency of the tape makes it easy to position and can be applied in fewer steps and eliminates the cure time of a liquid so that overall masking and de-masking can be accomplished up to five times faster*. Ease of application and clean, one-piece removal mean users could save up to 60%* on labor time and associated costs. Operates at temperatures up to 200°F/93°C.

3MTM PREFERRED CONVERTER A Preferred Converter for 3M™ is recognized as a leader in the

converting industry. We stock many 3M™ materials and have access to all materials available from the 3M™ converter markets. As a 3M™ Preferred Converter, we have immediate availability for the newest

materials and data provided by 3M™.

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 67

3M TA

PESPRO

TECTIO

NPRO

DU

CTS

HO

OK

S & REFEREN

CE

VHB 3MTM VHB TAPES WITH ALL-ACRYLIC CONSTRUCTION3M™ VHB™ 4952 is a black, 0.025” (0.6 mm) tape with a modified acrylic adhesive and a very conformable, acrylic foam core. This provides an extraordinarily strong double-sided foam tape that adheres to a broad range of substrates including aluminum, stainless steel, galvanized steel, composites, plastics, acrylic, polycarbonate, ABS, painted or sealed wood and concrete. Commonly used in applications across a variety of markets including transportation, appliance, electronics, construction, sign & display and general industrial. Specifically designed for good adhesion to high, medium and lower surface energy plastics and paints, metals and glass. Applications for this tape include bonding and sealing polycarbonate lens over LCD, signage and windows to post-painted control panels. Reliably bonds a variety of materials with strength and speed for permanent applications. Operates long-term at temperatures of up to 250°F/121°C with short excursions to 300°F/149°C.

3M™ VHB™ 4952 is a white, 0.045” (1.1 mm) tape which utilizes a low surface energy adhesive on both sides of a firm, acrylic foam core. This synthetic adhesive bonds to a variety of smooth surfaces, including lower surface energy substrates such as many plastics and powder coated paints. Applications for this tape include stiffener bonding, sealing polycarbonate lens over LCD, windows to painted control panels and mounting vinyl wiring ducts and conduit channels. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. 3M™ VHB™ 4952 offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces. Operates long-term at temperatures of up to 160°F/71°C with short excursions to 200°F/93°C.

CFS Custom Die Cutusing VHB

APPROXIMATE TIME TO ACHIEVE ULTIMATE BOND STRENGTH:

• 50% after 20 minutes

• 90% after 24 hours

• 100% after 72 hours

Bond strength may be achieved more quickly and in some cases, may be increased by exposing the bond to elevated temperatures (e.g. 150˚F (66˚C) for 1 hour).

BOND TYPICAL BUILD vs. TIME

100

80

60

40

20

020 MIN 1 HOUR 24 HOURS 72 HOURS

PERCENT OF FULL BOND

ROOM TEMP 50°F 150°F OR ABOVE

Lorem ipsum

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com68

3M T

APE

S

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 69

PROTEC

TION

PROD

UC

TS H

OO

KS &

REFERENC

E

2 MIL BLUE 3 MIL CLEAR

PROTECTION PRODUCTS

WE HAVE YOU COVEREDAt CFS we offer more than just traditional masking products. Protective films are used in virtually all

manufacturing industries to ensure that the final product arrives to the consumer in pristine condition.

We can slit, die cut and perforate these poly masks to any specification. Don’t forget protective caps

and plugs which protect threads during the shipping process!

POLY MASK TAPEOur standard protection tapes are available in 2 Mil blue or 3 Mil clear. Designed to be tear and puncture resistant, this self adhering film provides easy application with smooth lamination to the surface. The quick peel off performance leaves no residue on the finished part. Excellent for Class A finished products or stainless steel and plastic protection in shipping and manufacturing. Available in perforated rolls or die cut. Inquire about additional tape selections and sizes.

PMP2B-4x4 PMP3C-4x4 4.000 101.60 4.000 101.60 1000 PMP2B-4x6 PMP3C-4x6 4.000 101.60 6.000 152.40 1000 PMP2B-6x8 PMP3C-6x8 6.000 152.40 8.000 203.20 1000 PMP2B-6x10 PMP3C-6x10 6.000 152.40 10.000 254.00 1000 PMP2B-8x8 PMP3C-8x8 8.000 203.20 8.000 203.20 1000

PART PART LENGTH LENGTH WIDTH WIDTH ROLL NUMBER NUMBER INCHES MILLIMETERS INCHES MILLIMETERS QUANTITY

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com70

PRO

TEC

TIO

NPR

OD

UC

TS

POLYETHYLENE CAP PLUGS (LOW TEMP)

HIGH TEMP CAP PLUGS

TPCP-8 0.294 0.361 0.238 0.305 0.375 0.531 7.47 9.17 6.05 7.75 9.53 13.49 25,000 TPCP-10 0.356 0.424 0.300 0.368 0.375 0.593 9.04 10.77 7.62 9.35 9.53 15.06 20,000 TPCP-12 0.418 0.454 0.358 0.424 0.375 0.593 10.62 11.53 9.09 10.77 9.53 15.06 17,000 TPCP-14 0.412 0.488 0.412 0.488 0.500 0.718 10.46 12.40 10.46 12.40 12.70 18.24 17,000 TPCP-16 0.529 0.623 0.470 0.551 0.501 0.781 13.44 15.82 11.94 14.00 12.73 19.84 7,500 TPCP-18 0.588 0.676 0.522 0.608 0.531 0.875 14.94 17.17 13.26 15.44 13.49 22.23 5,000 TPCP-20 0.629 0.728 0.576 0.667 0.492 0.875 15.98 18.49 14.63 16.94 12.50 22.23 5,000 TPCP-22 0.686 0.784 0.630 0.728 0.625 0.937 17.42 19.91 16.00 18.49 15.88 23.80 4,000 TPCP-24 0.750 0.846 0.690 0.786 0.625 1.031 19.05 21.49 17.53 19.96 15.88 26.19 5,000 TPCP-28 0.894 1.037 0.834 0.977 0.625 1.156 22.71 26.34 21.18 24.82 15.88 29.36 5,000 TPCP-30 0.904 1.028 0.904 1.028 0.750 1.250 22.96 26.11 22.96 26.11 19.05 31.75 2,000 TPCP-32 1.095 1.215 1.035 1.155 0.750 1.500 27.81 30.86 26.29 29.34 19.05 38.10 2,000

PART A B C D E F A B C D E F

QTY/BOX NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

CAP PLUGS

FGCP-2 0.299 0.365 0.235 0.302 0.380 0.500 7.59 9.27 5.97 7.67 9.65 12.70 5,000 FGCP-2X 0.330 0.396 0.267 0.333 0.380 0.530 8.38 10.06 6.78 8.46 9.65 13.46 5,000 FGCP-3 0.361 0.427 0.298 0.365 0.380 0.560 9.17 10.85 7.57 9.27 9.65 14.22 5,000 FGCP-3X 0.390 0.456 0.327 0.394 0.380 0.590 9.91 11.58 8.31 10.01 9.65 14.99 5,000 FGCP-4 0.419 0.485 0.356 0.422 0.380 0.630 10.64 12.32 9.04 10.72 9.65 16.00 5,000 FGCP-5 0.471 0.547 0.409 0.485 0.440 0.690 11.96 13.89 10.39 12.32 11.18 17.53 5,000 FGCP-5X 0.500 0.576 0.440 0.516 0.440 0.720 12.70 14.63 11.18 13.11 11.18 18.29 5,000 FGCP-6 0.532 0.608 0.468 0.545 0.440 0.750 13.51 15.44 11.89 13.84 11.18 19.05 5,000 FGCP-6X 0.550 0.631 0.487 0.568 0.470 0.750 13.97 16.03 12.37 14.43 11.94 19.05 5,000 FGCP-8 0.640 0.727 0.578 0.664 0.500 0.880 16.26 18.47 14.68 16.87 12.70 22.35 5,000 FGCP-8X 0.640 0.727 0.578 0.664 0.500 0.880 17.15 19.18 15.57 17.60 12.70 22.35 5,000 FGCP-9 0.690 0.749 0.628 0.726 0.560 0.940 17.53 19.02 15.95 18.44 14.22 23.88 5,000 FGCP-11 0.802 0.911 0.740 0.849 0.630 1.060 20.37 23.14 18.80 21.56 16.00 26.92 5,000 FGCP-12 0.866 0.975 0.803 0.912 0.630 1.130 22.00 24.77 20.40 23.16 16.00 28.70 5,000 FGCP-14 1.094 1.215 1.031 1.152 0.750 1.410 27.79 30.86 26.19 29.26 19.05 35.81 2,500 FGCP-14X 1.175 1.284 1.113 1.222 0.630 1.440 29.85 32.61 28.27 31.04 16.00 36.58 2,500 FGCP-15X 1.235 1.360 1.173 1.298 0.810 1.500 31.37 34.54 29.79 32.97 20.57 38.10 2,500 FGCP-16 1.312 1.465 1.249 1.402 0.880 1.630 33.32 37.21 31.72 35.61 22.35 41.40 2,500 FGCP-17 1.447 1.600 1.384 1.537 0.880 1.750 36.75 40.64 35.15 39.04 22.35 44.45 1,000 FGCP-19 1.750 1.880 1.688 1.818 0.750 2.000 44.45 47.75 42.88 46.18 19.05 50.80 1,000 FGCP-20 1.780 1.950 1.718 1.888 1.000 2.130 45.21 49.53 43.64 47.96 25.40 54.10 1,000 FGCP-20S 1.781 1.805 1.722 1.746 0.380 2.000 45.24 45.85 43.74 44.35 9.65 50.80 1,000 FGCP-22S 2.015 2.147 1.953 2.085 0.750 2.310 51.18 54.53 49.61 52.96 19.05 58.67 1,000 FGCP-25A 2.125 2.406 2.063 2.377 1.000 2.530 53.98 61.11 52.40 60.38 25.40 64.26 1,000 FGCP-44 2.641 2.790 2.579 2.728 0.750 2.940 67.08 70.87 65.51 69.29 19.05 74.68 1,000 FGCP-500 2.849 2.980 2.787 2.918 0.750 3.250 72.36 75.69 70.79 74.12 19.05 82.55 1,000 FGCP-96A 3.270 3.562 3.200 3.492 1.130 3.690 83.06 90.47 81.28 88.70 28.70 93.73 250 FGCP-1067 4.090 4.320 4.010 4.240 1.250 4.620 103.89 109.73 101.85 107.70 31.75 117.35 250 FGCP-1128 7.970 8.140 7.880 8.050 1.000 8.380 202.44 206.76 200.15 204.47 25.40 212.85 100

PART A B C D E F A B C D E F

QTY/BOX NUMBER DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

Our cap plugs can be used as either a cap or a plug. Used to protect tube ends and threads to prevent contamination. The low temp version is made from polyethylene, while the high temp is nylon and can be used during coating processes to provide efficiency.

PRODUCT FEATURES• Temperature rating (Low Temp): 200° F / 93° C• Temperature Rating (High Temp): 400° F/ 204° C• Protect threads and tube ends during shipment• High temp version can be used in Powder Coating applications

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 71

HO

OK

S & REFEREN

CE

WE HAVE YOU COVEREDCFS has a wide selection of S, C, V & CV Hooks used for racking parts in powder coating and

e-coating operations. Our hooks have high load capacities, solid metal to metal contact and

consistent grounding. Quick turnaround and low order minimums. Contact us about manufacturing

custom hooks for your painting needs.

C Hooks .................................................................................... 72CV Hooks ................................................................................. 72S Hooks .................................................................................... 72

V Hooks .................................................................................... 72Swivel Hooks ........................................................................... 73

Group photo?

HOOKS

Don’t see the size, color or material you need? Contact us for custom solutions! info@customfabricate.com72

HO

OK

S &

REF

EREN

CE

S = S Hooks

C = C Hooks

V = V Hooks

CV = CV Hooks

HOOKSThe “V” shape will retain its grounding ability longer by allowing parts to seat in the same location, minimizing coating buildup. “S” shaped hooks make loading onto coating lines with H-attachments or Pendants easier and more efficient. The “C” shape allows for wider parts to be painted. Seating at the bottom of the hook allows for maximum loading capacity. A combination of our “C” and “V” style hooks allows for maximum flexibility in part seating and lower hook marks on finished products.

Product Features• Hooks are made from hard drawn spring

wire that can handle more weight than cold rolled steel

• High load capacity, solid metal to metal contact, consistent grounding

• 1 bag minimum order• Standard hooks feature 90 – 90 or 90 – 180

configurations. Other angles upon request.• Inquire about custom designs

All sizes are available in the following styles:

044-2 0.044 2.00 1.118 50.80 1000 062-2 0.062 2.00 1.575 50.80 1000 076-2 0.076 2.00 1.930 50.80 1000 044-3 0.044 3.00 1.118 76.20 1000 062-3 0.062 3.00 1.575 76.20 1000 076-3 0.076 3.00 1.930 76.20 1000 044-4 0.044 4.00 1.118 101.60 1000 062-4 0.062 4.00 1.575 101.60 1000 076-4 0.076 4.00 1.930 101.60 1000 120-4 0.120 4.00 3.048 101.60 1000 180-4 0.180 4.00 4.572 101.60 1000 044-6 0.044 6.00 1.118 152.40 1000 062-6 0.062 6.00 1.575 152.40 1000 076-6 0.076 6.00 1.930 152.40 1000 120-6 0.120 6.00 3.048 152.40 1000 180-6 0.180 6.00 4.572 152.40 500 076-7 0.076 7.00 1.930 177.80 1000 120-7 0.120 7.00 3.048 177.80 1000 180-7 0.180 7.00 4.572 177.80 500 062-8 0.062 8.00 1.575 203.20 500 076-8 0.076 8.00 1.930 203.20 500 120-8 0.120 8.00 3.048 203.20 500 180-8 0.180 8.00 4.572 203.20 250 062-10 0.062 10.00 1.575 254.00 500 076-10 0.076 10.00 1.930 254.00 500 120-10 0.120 10.00 3.048 254.00 500 180-10 0.180 10.00 4.572 254.00 250 076-12 0.076 12.00 1.930 304.80 500 120-12 0.120 12.00 3.048 304.80 500 180-12 0.180 12.00 4.572 304.80 250

PART NUMBER WIRE SIZE LENGTH WIRE SIZE LENGTH

QTY/BAG DIMENSIONS (INCHES) DIMENSIONS (MILLIMETERS)

For pricing, samples and online ordering visit us at www.customfabricate.com (800) 556-7188 73

HO

OK

S & REFEREN

CE

V-HOOK LOAD CHARTW

IRE

DIA

MET

ER (I

NCH

ES)

WEIGHT (POUNDS)

.250

.187

.125

.076

.062

.044

164 LBS.

220 LBS.

53.7 LBS.

18.3 LBS.

9.7 LBS.

4 LBS. WIR

E D

IAM

ETER

(IN

CHES

)

WEIGHT (POUNDS)

.250

.187

.125

.076

.062

.044

C, S, CV-HOOK LOAD CHART

58 LBS.

145 LBS.

28 LBS.

16 LBS.

6.8 LBS.

2.6 LBS.

Product Features• “U” and “V” Styles• Double ball bearing construction• Rotates 360°• 300 pound capacity

SWIVEL HOOKS Swivel U Swivel V

CUSTOM HOOK DESIGN CFS has the ability to design and manufacture custom hooks for use in your

powder and e-coating lines. Our goal is to increase your productivity through ease of use while providing an economical solution. Call for information

about snap hooks and all your custom needs.

74

HO

OK

S &

REF

EREN

CE

ELASTO

MER SELEC

TION

GU

IDE

AND

PHYSIC

AL PROPERTIES

E = EXCELLEN

T

G = G

OO

D

F = FAIR

P = POO

RThe information in this table is intended only as a guide. CFS recom

mends that any m

aterial you select be tested in your application prior to actual production.

Butyl(Isobutylene Isoprene)

Epdm(Ethylene Propylene)

Natural Rubber(Polyisoprene)

Neoprene®

(Polychloroprene)

Nbr, Nitrile, Buna-N)(Butadiene Acrylonitrile)

Silicone(Polysiloxane)

Sbr(Styrene Butadiene)

Viton(Flourinated Hydrocarbon)

300

475

220

375

300

600

275

675

-50 to+250

-60 to+350

-60 to+175

-40 to+250

-60 to+250

-90 to+450

-50 to+225

-20 to+600

40-80

40-90

40-90

40-90

40-90

25-80

40-90

50-95

AABAAABACAAABCBEBF

BGBKFCFEGE

AABATB

F-GGEG-E

G-EPEG

G-EGF-G

F-GGP-G

F-GE

EEGG-E

G-E

G-E

G-E

F-G

PPPFG-EPPE

G-EEG-E

G-EGEF-G

F-G

PPPPPPPE

F-G

F-G

G-E

F-GGG-EGG

800

600

700

600

600

800

600

300

EFF-P

G-E

G-EPF-G

G-E

PPPPF-PPPE

PPPGEPPE

G-EEPG-EPEPE

GEF-GPPPPP

PGEG-EGF-GGF-G

GEPPPF-PPP

GF-GEGGPF-G

F-G

F-GGG-EFGPGF

G-EEPG-E

P-EEPE

ELASTOMER

High Intermittent Temperature ˚F

Low/Hi Temp Usage ˚F

Hardness Range (Shore A)

Astm D2000/Sae J200 Type, Class

Abrasion Resistance

Acid ResistanceAlcoholsAliphatic Hydrocarbons

Alkali ResistanceAromatic Hydrocarbons

Compression SetElongation (Maximum %)

Gas Impermeability

Halogenated Hydrocarbons

Lubricating Oils Petroleum Based

Ozone ResistancePolar Solvents (Ketones)

Resilience-Rebound

Steam ResistanceTear ResistanceTensile StrengthWeather Resistance

All trademarks and registered tradem

arks are held by their respective owners.

75

HO

OK

S & REFEREN

CE

CONVERSION CHART

1/64 0.0156 0.40

1/32 0.0313 0.80

3/64 0.0393 1.00

1/16 0.0625 1.59

5/64 0.0787 2.00

3/32 0.0938 2.39

7/64 0.1094 2.78

1/8 0.1250 3.18

9/64 0.1406 3.58

5/32 0.1563 3.97

5/32 0.1574 4.00

3/16 0.1875 4.77

13/64 0.2031 5.16

7/32 0.2188 5.56

15/64 0.2362 6.00

1/4 0.2500 6.35

17/64 0.2656 6.75

9/32 0.2813 7.15

19/64 0.2969 7.55

5/16 0.3125 7.94

5/16 0.3149 8.00

21/64 0.3281 8.34

11/32 0.3438 8.74

23/64 0.3594 9.13

3/8 0.3750 9.53

25/64 0.3906 9.93

25/64 0.3937 10.00

13/32 0.4063 10.32

27/64 0.4219 10.72

7/16 0.4375 11.12

29/64 0.4531 11.51

15/32 0.4688 11.91

15/32 0.4724 12.00

1/2 0.5000 12.70

33/64 0.5156 13.10

17/32 0.5313 13.50

35/64 0.5511 14.00

9/16 0.5625 14.29

37/64 0.5781 14.69

19/32 0.5938 15.09

39/64 0.6094 15.48

5/8 0.6094 15.88

5/8 0.6299 16.00

21/32 0.6563 16.67

43/64 0.6719 17.07

11/16 0.6875 17.47

45/64 0.7086 18.00

23/32 0.7188 18.26

47/64 0.7344 18.66

3/4 0.7500 19.05

49/64 0.7656 19.45

25/32 0.7813 19.85

25/32 0.7874 20.00

13/16 0.8125 20.64

53/64 0.8281 21.04

27/32 0.8438 21.44

55/64 0.8661 22.00

7/8 0.8750 22.23

57/64 0.8960 22.63

29/32 0.9063 23.02

59/64 0.9219 23.42

15/16 0.9375 23.82

15/16 0.9448 24.00

31/32 0.9688 24.61

63/64 0.9844 25.01

1 1.0000 25.40

INCHES DECIMAL MILLIMETERS INCHES DECIMAL MILLIMETERS

76

HO

OK

S &

REF

EREN

CE

INDEXCAPS & PLUGS EPDM Caps, Pull Plugs, Tapered Plugs ...........................30-32EPDM Pull Plug Kit .................................................................. 29 EPDM Tapered Plug Kit .......................................................... 29Hanging Threaded Plugs ....................................................... 21Oversized Silicone Caps ........................................................ 13 Self Fusing Silicone Tape ....................................................... 13Self Threading Plugs ............................................................... 34Silicone Bore Mask Plug Combination ................................. 21Silicone Cap Kit ....................................................................... 26Silicone Caps ......................................................................10-11Silicone Chamfer Pull Plugs ................................................... 23Silicone Dual Flange Pull Plugs ............................................. 24Silicone Dual Washer Pull Plugs ............................................ 23 Silicone Flange Caps .............................................................. 12Silicone Flange Plugs ............................................................. 18Silicone Flange Pull Plugs ...................................................... 22Silicone Flangeless Plugs ...................................................... 19Silicone Hollow Pull Plugs ...................................................... 21Silicone Hollow Tapered Plugs .............................................. 15Silicone Leading Pull Plugs .................................................... 24Silicone Masking Kit - Caps, Pull & Tapered Plugs, Misc. ... 26Silicone Mouse Tails................................................................ 18Silicone Multi-Tapered Plugs ................................................. 19Silicone Pull Plug Kit ............................................................... 26Silicone Pull Plugs ................................................................... 20Silicone Push Weld Nut Plugs ................................................ 23Silicone Rectangular Caps ..................................................... 12Silicone Sheeting .................................................................... 29Silicone Sponge Cord ............................................................ 28Silicone Star Tubing ................................................................ 27Silicone Step Plugs ................................................................. 17Silicone Tapered Flange Plugs .............................................. 18Silicone Tapered Plug Kit ....................................................... 26Silicone Tapered Plugs, with Handles .............................14-15Silicone Thread Mask ............................................................. 16Silicone Threaded Plugs ........................................................ 25Silicone Tube Insert Plugs ...................................................... 16Silicone Tubing ........................................................................ 27Silicone Washer Plugs ............................................................ 17Silicone Washer Pull Plugs .................................................... 22Solid Silicone Cord ................................................................. 28Vinyl Caps ................................................................................ 33

TAPES & DIECUTSAluminum Foil Tape, Discs ................................................50-52 Crepe Masking Tapes ............................................................. 40Glass Cloth Tape, Discs .....................................................44-46Green Poly Donuts, Rectangles, Squares ............................. 39Green Poly Tab Discs .............................................................. 40High Temp Blue Vinyl Tape .................................................... 48High Temp Crepe Tape, Discs, Rectangles, Squares .....40-43High Temp Green Vinyl Tape ................................................. 48Industrial Grade Crepe Tape, Discs .................................41-42Lead Foil Tape, Discs .........................................................50-51Non-Adhesive Yellow Vinyl .................................................... 49Plotting Tapes .......................................................................... 47 Poly Film Tape Mask...........................................................43Polyester® Tapes, Discs .....................................................36-38 Green, Orange, Rusty Red, Blue, RedPolyimide Tapes, Discs ......................................................44-46Vinyl Tape ................................................................................. 49

INDUSTRIAL TAPES3MTM All Purpose Duct Tape DT8 .......................................... 593MTM Circuit Board Plating Tape 851 ................................... 573MTM Heavy Duty Duct Tape DT11 ........................................ 59 3MTM Impact Stripping Tape 500 .......................................... 593MTM Super Duty Duct Tape DT17 ........................................ 593MTM VHB Tapes with All-Acrylic Construction .................... 555 Mil Polyimide Tape............................................................... 57Double Sided Flatback Paper Tape ...................................... 54Double Sided Glass Cloth Tape ............................................ 58Double Sided PET Polyester Tape ........................................ 54Double Sided PET Tape ......................................................... 55Double Sided Polyethylene Foam Tape ..........................54-55Double Sided PVC Tape......................................................... 54Fiberglass Cloth with Aluminum Foil Tape .......................... 58High Temp Hot Air Leveling Tape ......................................... 57High Velocity Oxygen Fuel Tape ........................................... 58High/Low Tack Double Sided PET Tape ............................... 54Pipe Wrap and Blasting Protection Tape .........................58-59Premium PTFE Tapes .............................................................. 56Premium Silicone Rubber Coated Fiberglass Tape ............ 58PTFE Coated Fabric ................................................................ 56Red Polyester Plating Tape .................................................... 57Silicone Rubber Coated Fiberglass Tape ............................. 58Standard PTFE Tapes .............................................................. 56Ultra High Bond Double Sided Tape .................................... 55

3M TAPES201+ 3MTM General Use Masking Tape ...........................62213 3MTM High Temp Performance Masking Tape .........62 218 3MTM Fine Line Tape ....................................................... 622313MTM High Performance Paint Masking Tape .............. 62234 3MTM General Purpose Masking Tape .......................... 62250 3MTM Flatback Masking Tape .....................................62301+ 3MTM Performance Yellow Masking Tape................... 63401+ 3MTM High Performance Green Masking Tape ......... 63421 3MTM Lead Foil Tape ....................................................... 63425 3MTM Aluminum Foil Tape .............................................. 63467/468MP 3MTM Adhesive Transfer Tape .......................... 63470 3MTM Electroplating Tape ............................................... 64471 3MTM Vinyl Tape ............................................................... 64501+ 3MTM Specialty High Temperature Purple

Masking Tape ...................................................... 64764 3MTM General Purpose Vinyl Tape ................................. 64851 3MTM Circuit Board Plating Tape ................................... 642308 3MTM General Purpose Masking Tape ........................ 642364 3MTM Performance Masking Tape ............................... 652380 3MTM Performance Masking Tape ............................... 652525 3MTM Orange Performance Flatback Tape ................. 652693 3MTM High Performance Masking Tape .................658991 3MTM Blue Polyester Tape ............................................ 658992 3MTM Green Polyester Tape ......................................... 668985L 3MTM Anodization Tape .........................................66 VHB 3MTM VHB Tapes With All-Acrylic Construction .......... 67

PROTECTION PRODUCTSHigh Temp Cap Plugs ............................................................. 70Poly Mask Tape ........................................................................ 69Polyethylene Cap Plugs (Low Temp) .................................... 70

HOOKSC Hooks .................................................................................... 72CV Hooks ................................................................................. 72S Hooks .................................................................................... 72Swivel Hooks ........................................................................... 73V Hooks .................................................................................... 72

77

HO

OK

S & REFEREN

CE

NORMAL BUSINESS HOURS:Mon - Fri: 8:00 AM to 5:00 PM Central (Wisconsin, Texas locations) Mon - Fri: 8:00 AM to 5:00 PM Pacific (California location) Excludes holidays

ORDERING METHODS:Order online with our secure shopping cart and checkout system.Call CFS toll-free at (800) 556-7188 or from outside USA call (414) 421-2600.Email Purchase Orders to your individual account manager (must have terms established)

PAYMENT METHODS:Credit Card: Visa, MasterCard, Discover, American ExpressCheck (payable to Custom Fabricating & Supplies)Purchase Order (Net 30): Subject to credit approval. Customers must place an initial order with credit card before applying for an account. Past due accounts subject to service charge of 11/2% per month (18% per annum) on unpaid balances until paid.Bank Wire or ACH

INTERNATIONAL ORDERS – CFS sells and ships internationally. Payment will be required prior to shipment via bank wire. Shipping will be via customers’ FedEx, UPS or DHL account. Alternatively, customer may arrange pick-up by a freight forwarder of their choice.

PRICING – Current pricing may be found online at www.customfabricate.com or by contacting a CFS Representative. Minimum Order: $50 USD. Pricing is subject to change without notification. Pricing discrepancies will be confirmed prior to shipment. Prices are net and do not include any applicable federal, state, or local taxes, which will be either billed to or assumed by purchaser. All quantity prices apply to single shipments only. CFS reserves the right to adjust orders to the nearest full case.

SALES TAX – We will collect applicable sales tax on Products shipped to the states for which we determine we have a duty to collect sales tax. If your company is tax exempt, the certificate must be on file prior to order shipment to qualify for exempt status

SHIPPING AND HANDLING – All orders are F.O.B., any CFS location. CFS has 3 shipping locations which may result in split shipments from multiple locations, each with separate freight charges. Shipments will be made as nearly as possible in accordance with dates specified by seller’s acceptance of order, subject to any or all causes beyond seller’s control.

SHIPPING CHARGES – Prepaid shipping and handling charges are calculated by our based on the weight and volume of the products and the shipping destination. Orders placed before 3:00 PM Central Time on a business day can typically be shipped the same day. Please call to verify stock and shipping schedule. For prepaid shipping charges, CFS reserves the right to select UPS or FedEx as the carrier.

FREIGHT ACCOUNTS – Upon request, CFS will ship on the customers’ freight account. A valid account number must be provided at the time of order. If we are unable to use the account information provided, CFS reserves the right to prepay and add the shipping amount to customer invoice. If for any reason the carrier places shipping charges on a CFS account, customer remains liable for all fees. If the carrier charges additional fees due to an incorrect address, incorrect or invalid account number or an undeliverable package, customer will be responsible for those fees. This includes address correction fees, undeliverable fees, shipping charges for returning an undeliverable package and shipping charges for re-sending the package to the correct address.

LOST AND DAMAGED SHIPMENTS – UPON DELIVERY, inspect all goods CAREFULLY for damage. If goods are damaged, refuse on delivery, and contact CFS immediately for further instructions. DO NOT SIGN Delivery Receipt until you can count all pieces. Sign only for what you have received. If signed short, contact CFS immediately and CFS will proceed to file a loss claim. Any replacements will require issuance of a new Purchase Order.

CONCEALED LOSS & DAMAGE – Report concealed loss or damage to carrier within 48 hours and request inspection by the carrier. This is absolutely necessary: otherwise, the carrier will not be liable for payment or settlement of concealed damage freight claims. CFS will advise you on the best procedure to follow in filing a freight claim. However, CFS cannot assume any responsibility with respect to concealed lost & damaged freight claims.

ASSORTING PRIVILEGES – All items are assortable to determine case quantity for pricing, except as noted elsewhere in this schedule. Quantity ordered under this condition must be single shipment, to one destination, to qualify for quantity pricing.

NON-STANDARD & SPECIAL ITEMS – CFS reserves the right to increase or decrease order by 10% over or under the specified quantity. CFS will not be responsible for any special requirements not stated on the purchase order or disclosed by customer.

RETURNS – All merchandise delivered is non-returnable, except as authorized in writing by CFS in Wisconsin. Unauthorized returns will be refused. All returns will be subject to a re-stocking fee. All special order items or sizes slit to order are not returnable. Returned Goods Authorization Number (RGA) must be clearly marked on all returned items. RGA must be requested within 10 days of product shipment and shall expire 30 days after date of issuance of RGA.

CANCELLATION – Contact CFS to obtain a cancellation number. Cancellations will not be accepted without a cancellation fee if a product has been converted or slit to order. Cancellations will not be accepted on non-standard items and blanket purchase orders.

ERRORS – Typographical and clerical errors subject to corrections.

PRODUCT USE – Many factors beyond CFS’s control and uniquely within the users’ knowledge and control can affect the use and performance of our products in a particular application. Therefore, the user is solely responsible for evaluating any product to determine the fitness for a specific purpose and suitability for the method of application.

WARRANTY – CFS warrants its products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear after the initial date of shipment, CFS shall issue a credit in favor of purchaser in an amount not to exceed the purchase price of the products. Products are sold with the understanding that the buyer has independently determined the suitability of the product for his purposes and he is reminded that a few materials are sensitive to adhesive tapes and discretion should be used in their application. Bulletins, specifications, product and testing reports, and other descriptive and advertising material and information are based on research testing and are believed to be reliable, but constitute no part of this warranty, which is exclusive and strictly limited to the foregoing. This warranty is exclusive and is in lieu on any implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality, whether express or implied, except the warranty of title and against patent infringement. No waiver, alteration, additions, or modifications of the foregoing conditions shall be valid unless made in writing and manually signed by an officer of CFS. No agent or representative is authorized to give any guarantee or make any statement contrary to or inconsistent with this warranty.

LIMITATION OF LIABILITY – In no event shall CFS be liable for any incidental or consequential damages, including but not limited to loss of profit, loss of use or production, or loss of capital. The remedies of purchaser set forth herein are exclusive and the total liability of CFS with respect to any contract or anything done in connection therewith, such as the performance or breach hereof, or from the manufacture, sale, delivery, resale, installation, or use of any products, whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not exceed the purchase price of the products upon which liability is based.

TERMS & CONDITIONS OF SALE

WISCONSIN CALIFORNIA GEORGIA OHIO TEXAS 5500 W. Oakwood Park Dr. 9744 Alburtis Ave. Atlanta, GA 30115 Perrysburg, OH 43551 15401 Vantage Pkwy West, Ste. 104 Franklin, WI 53132 Santa Fe Springs, CA 90670 P: 404.414.0448 P: 440.463.3777 Houston, TX 77032 P. 414.421.2600 P: 562.944.1400 F: 414.421.2700 F: 414.421.2700 P: 281.219.3300 F: 414.421.2700 F: 562.944.1410 800.556.7188 800.556.7188 F: 281.219.3344 800.556.7188 877.487.1950 855.219.3300

V20

WISCONSIN CALIFORNIA GEORGIA OHIO TEXAS 5500 W. Oakwood Park Dr. 9744 Alburtis Ave. Atlanta, GA 30115 Perrysburg, OH 43551 15401 Vantage Pkwy West, Ste. 104 Franklin, WI 53132 Santa Fe Springs, CA 90670 P: 404.414.0448 P: 440.463.3777 Houston, TX 77032 P. 414.421.2600 P: 562.944.1400 F: 414.421.2700 F: 414.421.2700 P: 281.219.3300 F: 414.421.2700 F: 562.944.1410 800.556.7188 800.556.7188 F: 281.219.3344 800.556.7188 877.487.1950 855.219.3300

V20

www.customfabricate.com

WE HAVE YOU COVERED