CCuurrrriiccuulluumm VViittaaee

General Information

a) Name: Dr. TALIB MANSOOR

b) Address (Residential): B-13 Dilshad colony, Near Masjid Ayesha,

Dhorra, Aligarh, 202002

Cell. No: +917599112094

c) Email : talib61.cv@amu.ac.in

d) Designation: Professor

e) Department: Civil Engineering

f) Date of Birth : 30.06.1961

g) Area of Specialization: Hydraulics & Water Resources

Academic Qualifications

Exam Passed Board/University

Subjects Year

High School U. P. Board Sci, Math, Eng. 1974

Intermediate U. P. Board PCM 1976

B. Sc. Rohilkhand PCM 1978

B. Sc. Engg. AMU. Aligarh Civil 1985

M.Sc. Engg AMU. Aligarh Hydraulic structures 1988

Ph. D. UOR. Roorkee 1999

Title of M. Sc. Engg. Dessertation: Optimal Design of Water Distribution System

Title of Ph. D. thesis: Study of Skew Weirs and Sluice Gates

Seminars, Conferences, Symposia Workshops, Course etc. attended

S.No.

Name of the Seminar/ Conference/Symposia Workshop, etc.

Name of theSponsoringAgency

Place andDate

1. Short term course on “System AnalysisTechniques and Computer Applicationsin Water Resources Management”

Indian Nationalcommittee onhydrology

IIT RoorkeeJan. 5-20,2004

2. Workshop on Disaster Awareness andManagement

National center fordisasterManagement

AMU AligarhMar. 1-2,2001

3. Workshop on Wind Effects onBuildings and Structures

AICTE , ISWE &IIT Roorkee

AMU AligarhFeb. 1-2,2002

4. Training Programme on “Floodcomputation and Management”

ESCI Hyderabad ESCIHyderabadFeb, 12-16,2013

5. Training Course on “HydrologicModeling using RS?GIS with specialreference to climate change”

Ministry of EarthSciences, NewDelhi

NIH RoorkeeJune,3-7,2013

6.Workshop on Earthquake relateddisasters

Center for DisasterManagementStudies

AMU.Aligarh,April 26

20127.

Workshop on Flood Disaster and itsMitigation

Center for DisasterManagementStudies

AMU.Aligarh,May, 10 2012

8. Workshop on Natural Disaster(Earthquake and Cyclone) and theirMitigation

Center for DisasterManagementStudies

AMU.Aligarh,May, 12 2012

9.National Workshop on ”Advances inGeotechnical and TransportationEngineering”

TEQIP-II

AMU.Aligarh,March, 92013

10.First National Workshop on” SeismicSafety of Structures”

UGC-DRS-I(SAP)

AMU.Aligarh,March, 302013

11.National Workshop on” StructuralAspect of Earthquake Engineering” TEQIP-II

AMU.Aligarh,April, 202013

Seminars, Conferences, Symposia Workshops etc. organized

1. Organizing Secretary: National Workshop on “Water Resources Developmentand Management” held on Feb 23, 2013 in Civil Engineering Department, AMU.Aligarh.

2. Co convener: National Workshop “Earthquake related disaster”, held on April26, 2012 in Civil Engineering Department, AMU. Aligarh.

3. Coordinator: National Workshop on “Flood disaster and its Mitigation” held onMay 10, 2012 in Civil Engineering Department, AMU. Aligarh.

4. Co convener: National Workshop on Natural “Natural Disaster (Earth quake andcyclone) and their mitigation” held on May 12, 2012 in Civil EngineeringDepartment, AMU. Aligarh.

Teaching Experience

Courses Taught Name of the University/College / Institution

Duration

B.Tech.: Fluid Mechanics,Open Channel Flow,Hydrology, Dam

Civil Engg. Dept.ZHCET, AMU. Aligarh

20 years +

M.Tech. Earth & Rock filldams, AdvancedHydraulics

Civil Engg. Dept.ZHCET, AMU. Aligarh

10 years +

Innovations/Contributions in Teaching

Preparation of resource material FLUID MECHANICSIncluding books, reading materials, LAB MANNUALLaboratory manuals etc.

Membership of Professional Bodies, Societies etc.

Member of The Indian Society of Hydraulics (ISH)

Member of The Indian Association of Hydrologists (IAH)

Research Paper Published:

1. Swamee P. K., Pathak, S. K., Mansoor, T., and Ojha, C. S. P. (2000). “Dischargecharacteristics of skew sluice gates.” Journal of Irrigation and Drainage EngineeringASCE, 126(5), 328-334.

2. Mansoor, T., and Kumar, S. (2007). “Discharge characteristics of curved and V-weirs.”Proceedings of the national Conference on Civil Engineering: Advancement andChallenges. M. M. Engineering College, Mullana, INDIA. 83-86.

3. Mansoor, T., Athar, M., and Singh S. K. (2010). “An Experimental Study of Flow overCurved Weirs.” Proceedings of the 3rd International Conference on Hydrology andWatershed Management with a Focal Theme on “Climate Change – Water Food andEnvironmental Security” Centre for Water Resources, JNTU Hyderabad, India, 1158-1163.

4. Kumar, S., Ahmad, Z. and Mansoor, T. (2011). “A new approach to improve thedischarging capacity of sharp-crested triangular plan form weirs” Journal of FlowMeasurement and Instrumentation, Elsevier, 22 (3) 175-180. (ISSN: 0955-5986)

5. Swamee P. K., Ojha, C. S. P., and Mansoor, T. (2011). “Discharge characteristics ofskew weirs.” Journal of Hydraulic Research, IAHR, Taylor and Francis, iFirst, 2011, 1-3. (ISSN: 0022-1686)

6. Mansoor, T. (2012) “An experimental study of oblique sharp crested weir” Proceedingsof the International Conference on Emerging Trends in Engineering and Technology,College of Engineering, Teerthankar Mahaveer University, Moradabad, India, 1-6.

7. Kumar S., Ahmad Z., Mansoor T. and Himanshu S. K. (2012) “Discharge characteristicsof sharp crested weir of curved plan form” Research Journal of Engineering Sciences,International Science Congress Association, 1(4), 16-20. (ISSN: 2278-9472)

8. Mansoor, T. (2014) “Free Flow Below Skew Sluice Gate” International Journal ofEngineering Research and Development, 10(3), 44-52 (ISSN: 2278-800X)

9. Athar M., Mansoor T., and Khan T. P. (2014) “Study of Piano Key Weir” NationalConference on Water Resources Management – Achievements & Challenges, Departmentof Civil Engineering, Jamia Millia Islamia, New Delhi.

10. Solanki S., Mansoor T. and Athar M. (2015) “Flow characteristics of sluice gates”Hydro - 2015, 20th International Conference on Hydraulics, Water Resources and RiverEngineering, IIT Roorkee, India.

11. Ali M. S. and Mansoor T. (2015) “Performance evaluation of Piano Key Weir” Hydro -2015, 20th International Conference on Hydraulics, Water Resources and RiverEngineering, IIT Roorkee, India.

12. Mansoor T., Athar M. and Khan S. (2016) “Flow behavior of semi labyrinth sluicegates” Hydro - 2016, International Conference on Hydraulics, Water Resources andCoastal Engineering, CWPRS Pune, India.

13. Rehman A., Athar M., Mansoor T. (2016) “Variation of velocity and pressure in vortexmotion” Hydro - 2016, International Conference on Hydraulics, Water Resources andCoastal Engineering, CWPRS Pune, India.

14. Abdul Rehman, Athar Mohammad and Mansoor T (2017) “Mechanism of VortexMotion”, I. S. H., Journal of Hydraulic Engg., pp. 1 – 09.

M. TECH. DISSERTATION GUIDED:S.No

Topic Year Name of Candidate

1. Optimal design of water distribution system 2001 S. M. Tanveer2. Analysis of sharp crested oblique weirs 2005 S. Z. Abbas3. Scour characteristics under jets 2005 S.W. Ahmad4. Discharge characteristics of weirs 2006 Sanjeev Kumar5. Discharge characteristics of curved weirs 2007 Sanjay K. Singh6. Study of sluice gates 2012 Faisal Khan7. General Expression for Discharge Computation

of Piano Key Weir2013 Tariq Pervez khan

8. Study of sharp crested triangular weir 2014 Md. Shaheer Ali9. Study of sharp crested trapezoidal weir 2014 Md. Khursheed Alam

10. Study of Flow Mechanism in Vortex Chamber 2015 Abdul Rahman11. Study of Flow Through Sluice Gate 2015 Saurabh Solanki