Embed Size (px)
Citation preview
CURRICULUM VITAE
Profession: Electrical Engineer, Registered with PEC, SM IEEEDate of birth: March 19, 1959.Present post: Professor (2004-2018) Experience: 34 Years (12 Yrs Industry + 1 Yr Design/Consultancy + 21 Yrs R&D/Teaching)Publications: 228 Publications with 103.25 IF
Highlights
He teaches 2 to 3 courses, supervises 5 MS, 5 PhD and co-supervises 5 to 6 MS students each semester.He has completed two HEC funded research projects as professor in Comsats Park Road IslamabadHe completed Pak (CIIT)-US (NDSU) collaborative solar energy project in last three years.He got another HEC funded research project in 2016He has filed a Solar Heater patent in USA and HEC deposited Fee for Evaluation. He has published 93 IF, ISI Indexed, International or Local Journal and 124 international/local conferences papers.He wrote a book for NBC in 1992 on Fiber Optic Voltage/Current SensorsHe has written seven books in Urdu on energy and climate change issuesHe got Best Researcher Award from Comsats in 2013 and UPM Malaysia in 2003He is sound both theoretically as well as experimentally due to his 32 field and research experienceHe is an experienced Power & Energy professional in Comsats H/Q Campus IslamabadHe is senior member of IEEE USA since last two decadesHe is registered with PEC as a professional electrical engineer since 1984
Qualification:
B.SC. University of Engineering and Technology (UET), Lahore, Pakistan (1983)1984 Thesis title: Electric Power Distribution System Design
M.SC University of Reading, School of Science and Engineering, Reading, UK. (1988)1988 Thesis title: Fiber Optic Voltage and Current Sensors
Ph.D. University of Essex, School of Science and Engineering, Colchester, UK. (1991)1992 Thesis title: Development of High Power DFB Lasers
Patents1. PI 2005 3410, Norman Mariun, Azimah Omar, Nasrullah Khan, Ishak Aris, "Test Method and
Optimisation of Ignition System Parameters Inside CNG-DI Engine", 26 July 2005. Malaysia
2. PI 2005 5351, Norman Mariun, Liyth Ahmed Nisserat, Nasrullah Khan, Ishak Aris, "Radio Frequency Coaxial Resonant Cavity for Compressed Natural Gas Ignition", 16 Nov 2005. Malaysia
3. Docx # allotted on Thermosyphon driven CO2 Mediated Solar Water Heater, USA, 2016
1
Dr. Nasrullah KhanProfessor (2004-2018)
Department of Electrical EngineeringComsats Institute of Information Technology, Islamabad
+ (92) 03006490048, [email protected]
Exhibition Awards:1. Bronze Medal ITEX 2005, 16th International Invention Innovation Industrial Design &
Technology Exhibition 2005, for "RF Coaxial Resonant Cavity for CNG Ignition". Norman Mariun, Liyth Ahmed, Nasrullah Khan, Ishak Aris
2. Gold Medal Award, British Invention Show 2005, Alexandria Palace, London, for "RF Coaxial Resonant Cavity for CNG Ignition".
Norman Mariun, Liyth Ahmed, Nasrullah Khan, Ishak Aris)
3. Gold Medal, INPEX, Pittsburgh USA, June 2007, "Test Method and Optimization of Ignition System Parameters Inside CNG-DI Engine"
Norman Mariun, Azimah Omar, Nasrullah Khan, Ishak Aris
4. Silver Medal, Malaysia Technology Expo 2007, "Test Method and Optimization of Ignition System Parameters Inside CNG-DI Engine" Norman Mariun, Azimah Omar, Nasrullah Khan, Ishak Aris.
Job Assignments:
2006-To 2017As Chairman of Electrical Engineering and professor and superviser in the Department of Electrical Engineering, Comsats, Park Road, Islamabad
2004-2006As Professor, Head of Electronics Engineering Department and Chairman Laser Center in Federal Urdu University of Arts, Science & Technology, Islamabad.
1997-2004As Professor Madya in the Department of Electrical and Electronic Engineering, Faculty of Engineering, UPM, Serdang, Selanor, Malaysia
1995-1996Worked as Sr. Electrical Engineer and Project Manager in Zedan Consultants, for SCECO-E and SABIC Petrochemical Industries Al-Jubail, Al-Khober, Saudi Arabia, on power quality study.
1992-1994Worked as Manager Construction, Distribution, Operation, Transmission and Protection of 500kV/220/132/11 kV lines, substations in Faisalabad, Lahore, Sialkot and Ghakhar WAPDA, Cricket House Lahore, Pakistan.
1987-1991Completed MSC and PhD Degrees in Reading/Essex Universities, England, UK.
1986-1987Worked as Manager Distribution Operation in Ali Pur and Zafarwal in Gujranwala and Sialkot Circles, under Gujranwala Region, Wapda Gujranwala, Pakistan.
2
1986-1986Worked as AD (Planning), AD (Mapping Cel) under the Area Electricity Board Wapda, Gujranwala Region, Wapda Gujranwala, Pakistan.
1984-1986Worked as Manager Design and Construction, Second 500 KV Circuit Tarbella-Faisalabad-Jamshoroo, in Collaboration with Imperial Construction Company, Greave & Cotton, TEPSCO Japan, Canada and NESPAK, under overall supervision of Wapda.
Training Courses
1. “Fluidised Bed Reactor” Coal gasification, PEC, Islamabad, 2016
1 “Electric Power Quality”, Organized by Australian Co in Collaboration with Singapore at Marriot Hotel Kuala Lumpur, 12-14 November 2003.
2. “High Voltage Testing”, Organized by UMIST Electrical Engineering Research Centre and PES IEEE at UPM, August 22-24, 2003.
3. “Teaching Methods”, Organized by Faculty of Engineering, at Faculty of Education, UPM, 11-13 October 2000 Malaysia.
4. “Multimedia Mathematics”, Organized by Faculty of Science, at Computer Science Center, UPM, 20-23 July 2000 Malaysia.
5. “Fiber Optic and Photonics”, Organized by Malaysian Telecom., at University Malaya, Photonic Center, 16-20 July 2000 Malaysia
6. “Electromagnetic Compatibility”, Organized by Department of Electrical & Electronic Engineering, University Putra Malaysia, July 1999, Malaysia.
7. “How to become a good teacher”, Organized by Faculty of Engineering, Seminar Hall, Faculty Kejurutraan, April 1998 UPM Malaysia.
8. “Optical Communication Workshop”, Organized by Essex University in Collaboration with Southampton University and British Telecom Harwich, 5-15 September 1991.
9. “ Superconductors”, Organized by Universtat Karlsruhe, 6-12 July 1984, Germany.
Work Experience
1984-85: (EHV Line Construction WAPDA Lahore)Worked as electrical engineer in an electrical a utility (WAPDA) in Pakistan. I supervised construction of 500 kV transmission line project from Tarbella Dam to Faisalabad. It was being conducted by TEPSCO Japan in collaboration of ICC, NESPAK and Grieve & Cotton Pakistan. My responsibility was to supervise the job of contractors on site to note their progress and the
3
quality of work. Got experience of CPM, PERT, Drawing Work and Quality Control regarding excavation, backfilling, earthing, tension, sag and the related tasks.
1985-86: (US AID Mapping Cell, WAPDA Gujranwala)On completion of above project the WAPDA transferred me from EHV wing to Distribution Planning wing under CAEB WAPDA Gujranwala, Where undersigned worked on US-AID distribution planning project with NESPAK Consultants. Basic job was on mapping of 11 kV distribution feeders on global latitudes and longitudes. Major tasks include 11 kV line repair, maintenance, renovation, augmentation, bifurcation and electrification of new villages.
1986-87: (SDO in Distribution Operation, WAPDA Wazirabad & Pasrur Divisions)On successful completion of US-AID mapping cell project, undersigned requested for transfer in Distribution Operation Subdivision of WAPDA in Wazirabad Division. Major duties were to manage the maintenance staff, little bit renovation, revenue collection, metering, billing and line loss reduction using technical and management skills. Undersigned was transferred to Zafarwal subdivision in April 1987 due to departmental reasons. Got good experience of public dealing, emergency supply restoration and MV line load balancing. I also had additional charge of recovery Magistrate WAPDA whilst the basic job was distribution line maintenance and attending of troubleshooting on 11 kV electric networks. Undersigned qualified for MSC/Ph.D scholarship in UK/USA, while working as SDO (E) Subdivision WAPDA Zafarwal. In parallel with above job also coordinated research in PINSTECH Islamabad.
1987-91: (MS/PhD from Reading & Essex Universities, UK)Acquired MSC and Ph.D. degrees from Reading and Essex Universities UK. During study period in England, conducted research on application of lasers and fibre optics in power industry. Developed fibre optic CTs and PTs for use with protective relays, SCADA and Telemetry. Designed a tunable wavelength DFB dye laser for fiber optic communication applications.
1992-93: (Transmission & Maintenance Engineer 220kV Grid Ghakkhar)After higher study WAPDA appointed me in grid system operation at 220 kV Grid Station Ghakhar. My duty was to take care of lines and substations maintenance. Got maintenance experience of some 220, 132 and 66 kV Substations and their inter-connecting lines. My responsibility was to note discrepancies of substations & transmission lines and routine maintenance of MV /HV switchgears and transmission lines. Various equipment supervised include MV to EHV level power transformers, Switchgears such as SF6, Air blast, Vacuum and Oil CBs of different makes i.e. ABB, GEC, Siemons, Merlin Gerlin and Messwalander. Other equipment include rectifiers, emergency supplies, DC battery and capacitor banks.
1993-94: (Protection & Instrumentation 220 kV G/S Ghakhar)Resumed WAPDA utility in Pakistan as protection and instrumentation engineer in 1991 after completion of study period. His responsibility was to keep the protection and control of 28 Substations healthy. He used to carry out the routine testing as well as emergency trouble shooting as and when required for the above 28 Substations. The trouble shootings could be DC failure, contractor dropout, and open/close problem of EHV circuit breaker, slow/fast metering, distance relay mal-function, and inability to recognize faults, indiscriminate tripping or routine testing. Besides it got experience of testing various types of distance relays such as L8b (BBC), PYTS (GEC), 7SA (Siemens) and Micromho (GEC) etc. Also got experience of testing differential, Bucholz, overcurrent undervoltage relay and many others such as CDG and CTU, CAG, VTT & CTIG (BF) frequency relays. It also includes experience of C&DF testing, open/short circuit
4
testing, CT saturation testing, grids commissioning testing and various types of protection schemes.
1995-96: (Project Manager in Zedan Consultants, Saudi Arabia)Joined Ms Zedan Consultants as Project Manager in Saudi Arabia to conduct a power quality project of SCECO-E for SABIC Affiliates Riyadh. The SABIC industrial organizations in Al-Jubail consist of the Petrochemical, Rubber & Plastics, Power Cables, Fertilizers, Steal and Medicines manufacturing facilities. These 14 organizations fed from SCECO-E were visited for data and site inspection regarding, SVC equipment earhing, UPS, connections of protection & control, capacitor started motors, DOL started large motors, compressors, PLCs, the computer controlled processes and extruders etc. The simulation of SCECO-E transmission and distribution network along with SABIC industries loads was conducted using ETAP Program. A big power quality project completed under leadership of underwriter. Other international R&D organizations such as Siemons and GEC USA assisted to complete this project.
1997-2004: (Professor Madya, University Putra Malaysia)Working as Associate Professor in Department of Electrical and Electronics Engineering, Faculty of Engineering, University Putra Malaysia. Supervising and lecturing to the graduate and postgraduate students. Acted as coordinator for final year practical industry training, final year student projects and external moderator for Prime College franchised with UPM. The subjects that I have been teaching for last four years include: Opto-electronics (KEE 3201), AC/DC drives, Electrical Machines (KEE 3302), Engineering Mathematics (KKK), Network synthesis (KEE), Protective Relaying (KEE 4307), High Voltage Engineering (KEE 4317), Electric Power Quality (KEE 4309), Generation and Operation of Power System (KEE 4306). Worked as a team with juniors and seniors colleague lecturers at UPM. Conducted three short-term and two IRPA projects and currently involved in two IRPA and one Top Down Projects. Designed experiments for undergraduate power laboratory and working on establishment of a high voltage laboratory in new complex of UPM. Proposed new subjects and designed their contents such as Power Quality, High Voltage Engineering and Numerical Relaying.
2004-2006: (Professor/Head/Chairman, Federal Urdu University Islamabad)Joined FUUAST Islamabad as Professor under HEC (FFHP) scheme for one year extendible to multiple years for promotion of research activities and inducing quality culture in academics. Pro Vice Chancellor of FUUAST appointed me as Head of Electronics Engineering Department. As part of job I have furnished the University Building with appropriate labels and name plates and written introductory pages of University. I am involved in Laboratory establishments for electronics engineering department and physics department. I have developed course structure of BS (Engineering Physics) and BE (Electronics Engineering) in the light of HEC directives and PEC requirements for accreditation of engineering degree program.
2006-2017: (Professor/Chairman, Comsats Islamabad)Supervised 55 MS and 2 PhD and supervising 5 MSC and 4 PhD students in Department of Electrical Engineering. Developed Laser and Renewable Energy Research laboratories in Campus. Won three HEC research grants, two completed, one under progress. Long experience of working with local and foreign Companies/Universities.
5
Publications
International Journal of Scientific & Engineering Research, Volume 6, Issue 9, September-2015 520 ISSN 2229-5518 IJSER © 2015 http://www.ijser.org Live Line Selective Load Shedding 1Adnan Ahmad*, 2Shoaib Rauf,
6
3Nasrullah KhanDr Nasrullah Khan has 33 journal papers having 103.24 impact factor, 57 journal papers in international ISI indexed journals, 14 local journal papers and 124 papers in international peer reviewed conferences. He has total 228 publications in local and international journals.
Impact Factor Journal Papers(IF = 103.25)
1 N. Khan, N. Abas, A. Haider, Energy transition from molecules to atoms and photons, Initially accepted in an ISI indexed journal. 2018 (ISI Indexed Elsevier)or
2 N. Abas, AR Kalair, N. Khan, A Haider Z. Saleem, MS Saleem,” Review of Natural and Synthetic Refrigerants,Global Warming, Renewable and Sustainable Energy Reviews, 90, 557-569, April 2018 {IF 8.05)
3 N. Khan, N Mariun, N. Abas, AR Kalair, S. Iqbal, A Model of repetitively pulsed CO2 laser, Lasers in Engineering, Accepted, Final PDF corrected (IF=0.469) to publish in May 2018 (IF 0.469)
4 N. Khan, SM Goldwasser. N abas, AR Kalair, A Haider, Experimental investigation of unidentified He-Ne Lasers, Applied Optics, 56, 38, 10030-10039, 2017 (IF = 1.65) https://doi.org/10.1364/AO.56.010030
5 N. Abas, N. Khan, A. Haider, MS Saleem, A thermosyphon solar water heating system for sub zero temperature areas, Cold Regions Science and Technology, 143, 81-92, 2017 https://doi.org/10.1016/j.coldregions.2017.08.012 (IF=1.909)
6 S. Rauf, N. Khan, Application of DC-AC Hybrid Grid and Solar Photovoltaic Generation with Battery Storage Using Smart Grid, International Journal of Photoenergy, Vol-2017, 1-16, 2017. Article ID 6736928, https://doi.org/10.1155/2017/6736928 (IF-1.277)
7 J. Ikram, N. Khan, Q. Junaid, S. Khaliq, B.il Kwon, Analysis and optimization of the axial flux permanent magnet synchronous generator using an analytical method, Journal of Magnetics 22(2), 257-265, 2017. https://doi.org/10.4283/JMAG.2017.22.2.257 (IF= 0.718)
8 A. Kalair, N. Abas, AR Kalair, Z. Saleem, N Khan, Review of harmonic losses in power systems, Renewable and Sustainable Energy Reviews, 78, 1152-1187, 30 April 2017 (IF 8.05) https://doi.org/10.1016/j.rser.2017.04.121
9 N. Abas, A. Kalair, N. Khan, AR Kalair, I. Hussain, Review of Pakistan’s GHG Emissions compared to SAARC Countries, Renewable and Sustainable Energy Reviews, 80, 990-1016, 17 April 2017 (IF=8.05) http://doi.org/10.1016/j.rser.2017.04.022
10 N. Khan, A. Kalair, N. Abas, A. Haider, Review of ocean tidal, wave and thermal energy technologies, Renewable and Sustainable Energy Reviews, 72, 590-604, 20 th January 2017, ISSN: 1364-0321(IF =8.05), https://doi.org/10.1016/j.rser.2017.01.079
11 J. Ikram, N. Khan, S. Khaliq, B. Kwon, Reduction of torque ripple in an axial flux generator using arc shaped trapezoidal magnets in an asymmetric overhang configuration, Journal of Magnetics, 21(4), 577-585, December, 2016, ( IF= 0.713), ISSN (Print) 1226-1750, ISSN (Online) 2233-6656
12 N. Khan, N. Abas and A. Kalair, Multiline distributed feedback dye laser endorses Wien’s displacement law, Applied Physics B: Lasers and Optics, 122: 92-98, 12 April 2016 (IF 1.696) ISSN: 0946-2171 (Print) 1432-0649 (Online)
7
13 A. Kalair, N. Abas, N. Khan Comparative study of HVAC and HVDC Power Systems, Renewable and Sustainable Energy Reviews, 59, 1653-1675, 2016. (IF 8.05) ISSN: 1364-0321
14 N. Khan, N. Abas, A. Kalair “Pulsed and Continuous Wave (CW) Lasers in Oil, Gas, Coal and Ignition Industries” Lasers in Engineering, 30 (3-4), 137-157, 2015 (IF = 0.469) ISSN: 0898-1507 (print)
15 N. Khan, N. Abas, A. Kalair “Pulsed and Continuous Wave (CW) Lasers in Oil, Gas, Coal and Ignition Industries” Lasers in Engineering, 30 (3-4), 137-157, 2015 (IF = 0.469) ISSN: 0898-1507 (print)
16 N. Abas, A. Kalair, N. Khan, Review of Fossil Fuels and Future Energy Technologies, Futures, 69, 31-49, 2015. (IF = 1.802) ISSN: 1364-0321
17 N. Abas, N Khan, Carbon Conundrum, Climate Change, CO2 Capture and Consumptions, Journal of CO2 Utilization, Journal of CO2 Utilization, 8, 39-48, 2014. (IF =4.292) ISSN: 2212-9820
18 N.Khan, N. Abas, “Comparative study of energy saving light sources”, Renewable and Sustainable Energy Reviews. Vol. 15, pp. 296-309, 2011. ISSN:1364-0321 (IF=8.05)
19 N. Khan, N. Mariun and N. Abas. 2008. Photon fired power plants. Lasers in Engineering, Lasers in Engineering, Vol.18, No. 5-6, 383-401, 2008. (IF = 0.469) ISSN: 0898-1507 (print)
20 N. Khan, Z. Saleem, A. Wahid. 2007. Review of Natural Energy Sources and Global Power Needs. Renewable and Sustainable Energy Reviews, 12 (2008) 1959–1973. (IF =8.05) ISSN: 1364-0321(This paper was withdrawn due to a religious sentence in conclusion)
21 N. Khan, Z. Saleem and N. Abas. 2008. Endorsement of new SI Units Prefixes for Endorsement of New SI Unit Prefixes for Space, Time, Energy and Matter. Lasers in Engineering, Vol.18, No.1-2, 107-118, 2008 (IF = 0.469) ISSN: 0898-1507 (print)
22 N. Khan, Z. Saleem, A. Wahid, N. Abas. Energy Analysis of Solar Vs Laser Lightning. Lasers in Engineering, 17(5-6):311-328. 2007 (IF = 0.469) ISSN: 0898-1507 (print)
23 N. Khan.2004. Design of an ultra-short pulse multicolor distributed feedback dye laser. Lasers in Engineering. l4:1-10. (IF = 0.469) ISSN: 0898-1507 (print)
24 N. Khan. 2004. Triple overwritten Bragg Gratings based multi-wavelength distributed feedback dye lasers. Journal of Luminescence.106: 321-327. (GIF = 2.686). ISSN: 0022-2313
25 N. Khan and T. A. Hall. 2004. Pulse line-width and lifetime broadening study of multi-pulse pumped distributed feedback dye lasers”, Elsevier: Optics and Laser Technology. 36: 517-523. (IF =2.109). ISSN: 0030-3992
26 N. Khan and T. A. Hall. 2004. Model of a Multiple Pulses Pumped Distributed Feedback Dye Lasers. Applied Optics. 43(3):678-681. (GIF = 1.65). ISSN:1559-128X (print).
27 N. Khan and N. Mariun. 2004. Design and Experimental Characterization of a DC-Excited CW/Repetitively Pulsed Sealed off CO2 Laser. Optics and Laser Technology. 36: 87-94. (IF =2.109). ISSN: 0030-3992
8
28 N. Khan, T. A. Hall and N. Mariun,” Model of Temperature Grating Relaxation Times in Distributed Feedback Dye Lasers”, Optics Express, Vol. 11, No. 13, 1520-1530, 2003. (GIF = 3.307). ISSN:1094-4087
29 N. Khan and T. A. Hall,” A Five Line Distributed Feedback Dye Laser”, Elsevier: Optics Communications, Vol. 228, 177-180, 2003. (GIF=1.588). ISSN: 0030-4018
30 N. Khan,” Demonstration of a Nine Lines Distributed Feedback Dye Laser Using Three Pairs of Pump Beams”, App Phys B: Optics and Lasers, Vol. 78, No. 1, 35-38, 2003. (IF 1.696) ISSN: 0946-2171 (Print)
31 N. Khan and N. Mariun,” Observation of Discrete Supercontinuum Generation from a Multi-pulse Pumped Distributed Feedback Dye Laser”, App Phys B: Optics and Lasers, Vol. 78, No. 2, 179-181, 2003. (IF 1.696) ISSN: 0946-2171 (Print) 1432-0649 (Online)
32 N. Khan, N. Mariun, I. Aris and J. Yeak,” Laser triggered lightning discharge”, New Journal of Physics, Vol.4, 6.1-61.20, August 14, 2002. (GIF=3.786). ISSN: 1367-2630
33 N. Khan and M. Idrees,” Overexposure analysis of pulsed DFB dye laser source”, Journal of Biomedical Optics, Vol.6, N0.1, PP. 1-5, 2001. (GIF=2.53). ISSN: 1083-3668
Author has published several conference papers but does not own Hoong’s internet based telemetry papers, communication bottelnecks, let us affiliate paper and a few other print only type and electronic intrusions science and online indian non-impact factor Nouman’s journal papers submitted by students without my consent. They might be good but these were submitted without my consent. Conference papers give nothing except pangs and pricks (April 2018).
Research Projects
Project Title
Voltage Sag Study for Sabic & Sceco
Code
ZC-GEC
Amount
SR5000,000
Period
1994/95
Status
CompletedImpact of power quality on performance of the protective relaying.
Short term50223-98-02
RM 5,846 1998 Completed
Spectral and temporal profiling of corona on EHV transmission system.
Short term50208-19-42
RM 10,000 1999 Completed
Design of an optical CT for overcurrent relay
Short term50992
RM 10,000 Mar-Dec2000 Completed
Development of fiber optic instrument transformer based opto-numerical relaying
IRPA 02-02-04-0015 RM63,000 Jan00-Dec01 Completed
Laser induced lightning power generation
IRPA 02-02-02-0014 RM216,000 Jan00-Dec02 Completed
Development of ultrafast lightning arrester
IRPA 02-02-04-0013 RM152,000 Jan00-Dec02 Completed
Direct Injected CNG Car System Top-Down RM1,800,000
Jan03-Jan05 Ongoing
Design of an intelligent interface for mechanical relays
IRPA RM157,000 Jan03-Jan05 Completed
Design of an neural network based harmonic filter
Basic RM 30,000 Sep02-Dec03 Completed
Design of InGaN based blue lasers IRPA RM500,000 Jan 03-Dec05 CompletedSolar Power Based Sag Mitigation study HEC RS 1000, 000 Oct 25. 2005 Completed
Minimum Ignition Energy Study of HEC Rs9,000,000 2007 Completed
9
Combustible Fuel Gases
A Hybrid Solar Water Heating System using CO2 as Working Fluid
Live Load Reduction on 11kV Feeders Using Smart Grid Options
CIIT/NDSU
HEC
$76000
Rs5000,000
2011
2016
Completed
2018
Books Published in Pakistan
Books
1 Lasers and Fiber Optics: Nasrullah Khan(Published at Maclagan Press Lahore, Pakistan, 1987)
[1] Measurement of High Voltages and Currents Using Fiber Optic SensorsNasrullah Khan (Approved by Pakistan National Book Council Islamabad)
[2] Lecture Notes: Protective Relaying : Nasrullah Khan
[3] Lecture Notes: Electric Power Quality Problems and Their Solutions: Nasrullah Khan
[4] Lecture Notes: Art and Science of High Voltage Engineering : Nasrullah Khan
[5] Published One Chapter in a Springer Book and two in others
Urdu Books Published
1. Sustainable Energy Systems2. Energy Education3. The Lightning4. Nature, Human and Science5. Axis of Terror6. A Common Man7. Waiting for Lightning to Strike
Prioritized Research AreasRenewable Energy (Solar, Winds, Geothermal)Development of Lasers (Femtosecond to attosecond DFDL, Nd:YAG and CO2 lasers) Electric Power Quality (Voltage sags, swells, spikes, harmonics and transients)Laser Ignition System (Laser ignition of high air/fuel ratio CNG engines)Atmospheric Electricity (Laser triggered lightning, laser induced breakdown, Filamentation)Fiber Optic Sensors (Faraday effect, Pockels effect, Kerr effect and Acousto-optic effects)Protective Relaying (Microcontroller, microprocessor, intelligent relays for SASed grid system)
10
Continuous Education
1 Attended LT-17 on Superconductivity in Karlsruhe Germany, 1984.
2 Attended High-Tech Induction Program, Pinstick, Islamabad 1997.
3 Deutsche Technik Worter Grundug, Goethe Institute Pakistan, 1992.
4 Laser as a super tool, International Writing Competition in USA, 1990.
5 Firefighting and Safety Procedure Course, 220 kV Grid Station GKR 1993.
6 Specifications testing of HV Switchgears at PEL Industries Lahore 1993.
7 Testing of HV Panels at Faizy Industries Gujranwala, 1994.
8 EHV power transformers failure case study, WAPDA Pakistan, 1994.
9 Reconstruction of 132 kV Substation after fire accident, 1995
10 Power system simulation using ETAP Program, KFUPM, KSA, 1996.
11 ISO 9000 Awareness Training at University Putra Malaysia, July 1999.
12 Delivered an extension lecture to Faculty staff on, DFB lasers, September 1999.
13 Prepared 3 IRPA Proposals in 1999, All of them accepted/Approved.
14 IT Applications in Mathematics, Workshop at UPM, July 2000.
15 Prepared a “Laser Ignition” Proposal under Top-Down Program, 2000.
16 Recent Progress in Superconductor Materials by Prof. Kozo Osamura, Sept/2000.
17 Attended ISO 9001 Awareness Seminar, Faculty of Engineering, October 2000.
18 Attended Hari Q 2000 Seminar in new complex at UPM, November 19, 2000.
19 Attended Fiber Optic Connectors Technology Seminar organized by Photonic Research Laboratory, KKK, University Putra Malaysia, November 23, 2000.
20 Attended power quality conference , Rosement Convention Center USA, September 9-13 2001, arranged by UPM.
21 Attended two day Numerical line protection seminar 24-25 October 2001 at UPM. It was arranged by IEEE Malaysian Chapter.
22 IEEE PES arranged, Sol-gel insulation and coated conductor development for high field insert coil technology at NHMGL, by Prof Yusof Suat Hascicek (Turkey) 17 July 2002.
11
23 IEE PES arranged seminar, Assuring high quality power for digital economy and advanced manufacturing, organized by SIRIM at Kollege Universiti Technologi, 20 July 2002.
24 IEEE arranged talk, VSC based FACTS controllers modeling and applications, Arranged by SIRIM, Shah Allam, 2-3 October 2002.
25 IEEE PES arranged course on, Design and analysis of power converters, by H. Rashid at UPM, 18-19 July 2002.
26 Attended UPM student branch arranged IEEE carrier talk in electrical power engineering7 February at UPM under IEEE PES Umbralla.
27 Attended Hydrogen Economy Workshop in Meriot Hotel Putra Jaya, September 2002.
28 Attended IEEE arranged, Emergence of photonics and rigorous modeling of photonics devices, by Prof BMA Rahman, 15 November 2002.
29 Lightning hazards and safety, Lecture by Hartono Zainal Abidin at UNITEN, 21/1/2003.
30 Attended Distributed Generation Policy Lecture By Dr Abdul Kalam, Arranged by IEEE Malaysia Fabruary 25, 2003.
31 Attended Hydrogen economy meeting project mobilization meeting March 2003.
32 Attended Solar Ball project proposal meeting to sketch the details August 14 2003.
33 Attended CNG Ignition Project Progress meeting at Cameron Highlands, October 2003.
Consultancy Experience Consultancy experience includes design, termination, drawings, tender documents, equipment specifications, data collection, analysis and site supervision in the following areas:
1. 500 kV Line Construction Project, 2nd Circuit of WAPDA, Tarbella- Faisalabad, 1984/85. My first appointment in wapda was to deal with consultants and contractors of 500 kV line contruction companies including ICC, TEPSCO and NESPAK consultants. Carried out documentation and site visits to confirm execution of project according to PERT & CPM . 2. SABIC Industries Voltage Dip Study Project, Zedan Consultants, Saudi Arabia 1995/96. I carried out data collection, utility and industry network simulation on ETAP software, analysis and experimental real time recommendations. It was a electric power quality project. Besides it assisted other divisions of office such as substation design, scada system, cable sizing and termination. Substations under design project included Ibn Khaldoun and Khafgi.
AWARDs
1. Excellent Engineer Award, for completing 500 kV T/L Project, six month before the
12
scheduled time, EHV Wing of Wapda, 1984, Lahore Pakistan.
2. S&T Scholarship Award, for best academic and professional achievements, by Ministry of Science and Technology, 1987 Islamabad Pakistan.
3. Good Performance Certificates, for services and research in Department of Electrical and Electronic Engineering, Faculty of Engineering, 1997-2004, University Putra Malaysia.
Member of Professional Institutes
I am member of the following national and international organizations.
1. Member IEEE (PAK), Registration Number AM-1070, October 1992.2. Member IE (PAK), Registration No. M/9036-L/1119, March 1989.3. Registered with (PEC) Islamabad, Reg. No. Elect/4685, 1984.4. Senior Member IEEE (USA) promoted Senior Member in 2003.5. Member IEEE (USA) Power Engineering Society in 20036. Member IEEE (USA) Electro-optics Society in 2003
Editorship ExperienceReferee of SIRIM Journal of Industrial Technology, Malaysia.Reviewer of IEEE Transactions on Photonics Technology Letters (USA)Reviewer of IEEE Transactions on Plasma Science (USA)Reviewer of Applied Optics (USA)Reviewer of Optics Communications (USA)Reviewer of Laser Technology (USA)Reviewer of Applied Physics B: Laser and Optics (Germany)Reviewer of Applied Energy ElsevierReviewer of Lasers in EngineeringReviewer of solar, wind and energy journals
Referees
13
Prof. Dr. Tom. A. Hall (Supervisor) Prof. Zahid Saleem School of Science & Engineering Dean Abasyn University Islamabad University of Essex, Wivenhoe Park Colchester [email protected] 43 SQ Colchester UK [email protected]
Prof Dr Norman Mariun Prof Dr Tahir IzharDepartment of Electrical Engineering Department of Electrical EngineeringUniversity Putra Malaysia UET Lahore, Punjab, [email protected] [email protected],pk
14
