Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
1
CURRICULUM VITEA
Name : Ts. Dr Mohd Yusof Md Daud
Date of Birth : 13 October 1972
Nationality : Malaysia
Marital Status : Married
Home Address : 56 Jalan Nakhoda Kiri C/1, Kampung Nakhoda, 68100 batu Caves,
Selangor
: H/P: 019-6038525
Corresponding : SAME AS ABOVE Address Tel: 03-26154797 (O), Fax: 03-21805380 E-mail: [email protected] Website: https://people.utm.my/yusof ACADEMIC QUALIFICATION 2006 : Ph.D. (Ultrasonic Metal Forming) University of Glasgow 2000 : M.Sc. (Materials Engineering) Universiti Sains Malaysia 1996 : B. Eng. (Mechanical) Universiti Sains Malaysia
mailto:[email protected]://people.utm.my/yusof
2
AWARDS AND HONOURS RECEIVED
Date : Awards/Achievement
2017/2018 March 2017 November 2017 2016/2017 2013 2010 2008 2002-2006 1999-2000
1. Award of Excellent in Active Bended Learning, “MRSE
1513 Operations Strategy and Management”. 2. Gold Medal, UTM Razak School Poster Day, “Ultrasonic
Horn for Metal Tube Forming”. 3. Appreciation of Participant, INATEX 2017 “Tank Jacking
Structure for Crude oil Refinary”. 4. Award of Excellent in Active Bended Learning,”ERSA
1213 Supply Chain Management”. 5. Excellent Service Award UTM 2013.
6. Best Paper Award, “Multiple performance optimization for the best metal injection molding (MINM) green compact.”, International Conference on Plant Equipment and Reliability (ICPER2010), Kuala Lumpur, Malaysia, 2010.
7. Excellent Service Award UTM 2008. 8. SLAB/UTM Scholarship for PhD. 9. SLAB/UTM scholarship Master.
3
PROFESSIONAL EXPERIENCE
Date Positions/Employer
1 May 2017 - Now 1 April 2014 – Now 9 May 2013 - Now 1 Oct 2012 – 30 Sept 2014 1 May 2010 – 30 Sept 2012 1 Feb 2008 – 30 April 2012 13 February 2008 – Now 1 June 2001– 31 Aug 2001 27 July 2000 – 12 Feb 2008 4 Aug 1997 – 26 July 2000 2 May 1996 – 31 July 1997
1. Programme Coordinator, Executive Master in
Occupatinonal Safety and Health Management, UTM Razak School.
2. Part Time Lecture, Graduate School of Business Administration, Meiji University, Japan.
3. Board of Study Advisor and Academic Evaluation Panel, Kolej Yayasan Pelajaran Johor (KYPJ).
4. Head Mechanical Engineering Panel, Dpt of
Engineering, UTM Razak School.
5. Head of Mechanical Engineering Department, UTM Razak School.
6. Head of Joint Programme Department, College of Science and Technology, UTM Kuala Lumpur.
7. Senior Lecturer (DS52), Universiti Teknologi Malaysia, Kuala Lumpur.
8. Ad-Hoc Academic Programme Evaluation Panel for JPA Recognition, Diploma of Mechanical Engineering (Material and Textile), Politeknik Pasir Gudang and Politeknik Seberang Perai, Malaysia Public Service Department (JPA).
9. Lecturer (DS45), Universiti Teknologi Malaysia, Kuala Lumpur.
10. Tutor, Universiti Teknologi Malaysia, Kuala Lumpur.
11. Engineer, Production Department, PROTON Berhad.
4
TEACHING & LEARNING
POSTGRADUATE COURSES TAUGHT
Project Management, Operation and Strategy Management, Operation and Production Management,
Industrial Ergonomics, Technology Management, Technovation Management, Supply Chain
Management, Strategic Management, Research Methodology.
Cumulative Credit Hours for Postgraduate Teaching from 2008-2020 = 188 Credit Hours
Session Semester Code Course Credit Hour
2019/2020 2 MRSE2543 MRSE2543 MRSA2083 MRSF1223 MRSE2593 MRSE1513
Supply Chain Management (Sec 01) Supply Chain Management (Sec 02) Industrial Ergonomics Technovation Management Technology Management Operation and Strategy and Management
3 3 3 3 3 3
2019/2020 1 ERSA1113 MRSA2083 MRSE2583
Current Topics In Production And Operations Management Industrial Ergonomics Project Management
3
3 3
2018/2019 3 ERSA1113
Current Topics In Production And Operations Management
3
2018/2019 2 MRSE2583 MRSE2543 MRSE2543 MRSE2583 ERSA1213 MRSA2083
Project Management (Sec 01) Supply Chain Management (Sec 01) Supply Chain Management (Sec 02) Project Management (Sec 05) Current Topics Supply Chain Management Industrial Ergonomics
3 3 3 3 3
3
2018/2019 1 ERSA1213 MRSF1223 MRSA2083
Current Topics Supply Chain Management Technovation Management Industrial Ergonomics
3
3
2017/2018 2 ERSA1213 MRSA2083 MRSE2543 MRSE2583 MRSF1223
Current Topics Supply Chain Management Industrial Ergonomics Supply Chain Management Project Management Technovation Management
3
3 3 3 3
2017/2018 1 MRSE1513 Strategy and Operation Management 3
5
MRSF1223 MRSA2083 ERSA1233
Technovation Management Industrial Ergonomics Current Topic in Project Management
3 3 3
2017/2018 2 MRSF1223 MRSA2083 ERSA1233 MRSE2583
Technovation Management Industrial Ergonomics Current Topic in Project Management Project Management
3 3 3 3
2016/2017 1 MRSA2083 ERSA1123 ERSA1213
Industrial Ergonomic Current Topic in Technology Management Current Topic in Supply Chain Magement
3 3
3
2016/2017 2 MRSE2583 MRSF1223
Project Management Technovation Management
3 3
2016/2017 3 ERSA1213 MRSE2543 MRSA2803
Current Topic in Supply Chain Magement Supply Chain Management Industrial Ergonomics
3
3 3
2015/2016
1 MRSE1513 ERSA1113 ERSA1123 MRSE2583
Productions Strategy & Management Current Topics In Production and Operations Management Current Topics In Technology Management Project Management
3 3
3
3
2015/2016
2 MRSE2583 MRSA2803 MRSE1123
Project Management Industrial Ergonomic Startegic Management
3 3 3
2015/2016 3 EMS2173 Resource and Project Management 3
2014/2015 1 MRSE2593 ERSA1123 MDE2583 MRSE2583
Technology Management Current Topics In Technology Management Project Management
3 3 3 3
2014/2015 2 MDE2593 Technology Management 3
2013/2014 1 UDP0010 Research Methodology 3
2013/2014 2 EMS2173 MDE2583 MDE2593
Resource And Project Management Project Management Technology Management
3 3 3
2012/2013 1 EMS 2173 Resource And Project Management 3
2011/2012 1 EMS 2173 Resource And Project Management 3
2010/2011 1 EMS 2173 Resource And Project Management 3
6
UNDERGRADUATE COURSES TAUGHT
Diploma and Under Graduate Teaching
Manufacturing Processes, Industrial Engineering, Ergonomics, Statics, Mechanic of Machine,
Engineering Drawing, Material Science, Welding Engineering, Material Technology, Automotive
Production, Operation Management, Engineering Science, Engineering Mechanics, Product
Development.
Cumulative Credit Hours for Undergraduate Teaching from 2008-2020 = 146 Credit Hours
Session
Semester Code Course Credit Hour
2019/2020 2 SMJP2113 Manufacturing Process 3
2019/2020 1 SMJP 4293 DDWJ3502 DDWJ3921
Welding Engineering Mechanical Design Project Engineering Laboratoty 2
3 2 1
2018/2019 1 DDWJ3703 DDWJ3502
Manufacturing Process Mechanical Design Project
3 2
2017/2018 2 DDWJ1802 DDWJ1802
Industrial Engineering (Sec 28) Industrial Engineering (Sec 29)
2 2
2017/2018 1 DDWJ1802 Industrial Engineering 3
2017/2018 2 DDWJ1802 DDWJ1802
Industrial Engineering (Sec 28) Industrial Engineering (Sec 29)
2 2
2016/2017 1 DDPJ3504 DDPJ3504
Mechanical Design Project (Sec 50) Mechanical Design Project (Sec 51)
4 4
2016/2017 2 DDPJ3213 Mechanic of Machine 3
2015/2016 1 DDPJ3213 Mechanic of Machine 3
2015/2016 2 DDPJ2922 DDPJ3003 SMJP4293
Engineering Lab 1 Manufacturing Process Welding Engineering
3 3 3
2014/2015 1 DDPJ3213 DDPJ3504
Mechanic of Machine Mechanical Design Project
3 4
2013/2014 1 DDPJ3003 SRSI2915 SRSI2043
Manufacturing Process Industrial Training Supervision Ergonomic Principles
3 5 3
2013/2014
2 DDPJ1203 DDPJ2733 SRSI2143
Static Manufacturing Process Applied Ergonomics
3 3 3
2012/2013 1 SRSI1203 DDJ3003
Material and Manufacturing Process Manufacturing Process
3 3
2012/2013 2 DDJ1203 SRSI1003
Static Engineering Mechanic
3 3
2011/2012 1 SRSI1203 Material and Manufacturing Process 3
2011/2012 2 DDJ3703 Manufacturing Process (Sec 21) 3
7
SME2713 DDJ3703 SRI2915
Manufacturing Process Manufacturing Process (Sec 27) Industrial Training Supervision
3 3 5
2010/2011 1 DDJ3003 DDJ3703 DDJ 2922
Manufacturing Process Manufacturing Process Engineering Lab 1
3 3 2
2010/2011 2 DDJ3703 DDJ3703
Manufacturing Process (Sec 19) Manufacturing Process (Sec 27)
3 3
2010/2011 3 SME1902 Engineering Workshop 2
2009/2010 1 DDJ3003 DDJ3003
Manufacturing Process (Sec 19) Manufacturing Process (Sec 27)
3 3
2009/2010 2 DDJ3703 DDJ3932
Manufacturing Process Engineering Lab 2
3 2
2008/2009 1 DDJ3003 DDJ3003
Manufacturing Process (Sec 27) Manufacturing Process (Sec 28)
3 3
2008/2009 2 DDJ3003 DDJ3003
Manufacturing Process (Sec 27) Manufacturing Process (Sec 28)
3 3
SUPERVISION
POSTGRADUATE SUPERVISION (RESEARCH STUDENTS GRADUATED)
Doctoral Degree / PhD
No. Year of Graduation
Name Title Roles of supervision
Status
1. Engineering Doctorate (2019)
Mohamad Hamzi Bin Mohamad
Energy Efficiency Performance Model for Office Buildings in Malaysia
Main Supervisor
Gradated
2. PhD (2018)
Mohd Zubairy Shamsudin
Rekabentuk dan Pembangunan Instrumen untuk Menilai Faktor Risiko Gangguan Rangka Otot Pekerjaan Kendalian Manual
Main Supervisor
Graduated
8
3. PhD (2012)
Rosmah Ali
An Instrument to Measure Information and Communication Technology User-Skills ability for Engineering Learning.
Co Supervisor
Graduated
Master of Philosophy Degree (Research)
No. Year Of Graduation
Name Title Roles Of Supervisor
Status
1. M. Phil. (2017)
Nur Amanina Damira Muhalim
Experimental Investigation and Finite Element Modelling of Quasi-Static and Ultrasonic Compression of Copper Tube
Main Supervisor
Graduated (Razak School Best Student)
POSTGRADUATE UNDER SUPERVISION (RESEARCH STUDENTS)
No. Degree Name Title Roles of supervision
Status
1. PhD Muhammad Shahrizzat Bin Ramli
Mahalanobis Taguchi Optimization in Injection Moulding
Main Supervisor
In Progress
9
2. PhD Rajasurian A/L Muthu Elandy
Ergonomic Design in Mechanical Workshop
Main Supervisor
In Progress
3. Eng. Doc
Fazarizul Hashidi Bin Muhamad Pauzi
LRT’s business model framework: increasing ancillary revenue and facilitating smart urban environments through technology services
Main Supervisor
In Progress
4. PhD Nikk Adam Bin Abdillah Kipalli
Improving the Passenger Travel Experience through Internet of Things Technologies at Smart Airports
Main Supervisor
In Progress
5. PhD Saifolnizam bin Hashim
Optimization of interface particle bonding of End of Life (EoL) vehicle parts substrate using HVOF
Main Supervisor
In Progress
6. Eng. Doc
Hazrizam bin Abrahim Data Quality Management framework for MTR in Oil and Gas Industry
Main Supervisor
In Progress
10
7. Eng. Doc
Razni bin Khalid
Maintenance Framework for TVET Colleges in Malaysia
Main Supervisor
In Progress
8. PhD Mohd Naqiuddin bin Mohd Salleh
Automated Defect Detection in Elbow Pipe by using Ultrasonic Guided Wave
Co Supervisor
In Progress
9. Eng. Doc
Azrol Syazli bin Aziz Decision Making Framework to Deliver Project for Early Operation: Petrochemical Project
Co Supervisor
In Progress
10. PhD Noor'ain binti Zainal Abidin
Exploring Learning Approach through Project Management Game to Improve Project Management Competency
Co Supervisor
In Progress
POSTGRADUATE DISSERTATION SUPERVISION (TAUGHT COURSE STUDENTS GRADUATED)
No. Year of Graduation
Name Title Degree University
11
1. 2020 Nor Azhar Ahmad Zubir
Ergonomic Assessment of Musculoskeletal Disorders among Flight Baggage Handlers at KLIA
Exec. Master (Occupational Safety and Health Management)
UTM
2. 2018 Nur Khairol Bariah Mohd Yatim
Assessing the Effect of Heat Stress on Cognitive Function among Construction Site Traffic Controllers
Exec. Master (Occupational Safety and Health Management)
UTM
3. 2018 Nurul Ayu Abu Jalil
Project Monitoring Tool for Research and Development Project in Research Institute
M.Sc (Engineering Business Management)
UTM
4. 2018 Zulkarnain Bazid Biocide Substance Awareness Concerning Skin Sensitization of Chemical Supply Company in Malaysia
Exec. Master (Occupational Safety and Health Management)
UTM
5. 2017 Mohd Nizam Esa Risk Assessment of Musculoskeletal Disorders (MSDs) in Cut and Bend Section at Amsteel Mills Sdn Bhd
Exec. Master (Occupational Safety and Health Management)
UTM
6. 2017 Muhammad Zafariq Zainal
Organizational Stress among Operation Department at Offshore Topside Construction
M.Sc (Engineering Business Management)
UTM
7. 2017 Ahmad Hafiz Mustapha
Physical Disorder among Network Operation Center Workers at Telekom Malaysia Cyberjaya
Exec. Master (Occupational Safety and Health 5.Management)
UTM
8. 2016 Mohamad Shahmi Mahamad Yasri
Improving Supply Chain Management in Servicing Life Raft for Marine Department in Destini Prima Sdn Bhd
M.Sc (Engineering Business Management)
UTM
9. 2016 Nurzatul Iffah Abdul Malik
Ergonomics Risk Factor Assessment at Army Logistics Headquarters
Exec. Master (Occupational Safety and Health Management)
UTM
10. 2016 Anuar Mustam Embedding EASA System (Modular) to MQA System (Diploma) by Lean Implementation in UniKL-MIAT
M.Sc (Engineering Business Management)
UTM
12
11. 2016 Megat Wiswan Mgt Mazelan
Awareness on Safety Management during Pipe Repairing Work by Syarikat Bekalan Air Selangor (SYABAS) Panel Contractor on Site
Exec. Master (Occupational Safety and Health Management)
UTM
12. 2016 Haryati mohd Yatim
Managerial Competency on Technology Transfer Project in a Multinational Company
M.Sc (Engineering Business Management)
UTM
13. 2015 Nuur Rusilawati Mat Haron
Kesedaran Keselamatan Kontraktor Gred G1 Telekom Malaysia Kedah
Exec. Master (Occupational Safety and Health Management)
UTM
14. 2015 Yeoh Kah Loon Assembly Layout Improvement in Company Anonymous
M.Sc (Engineering Business Management)
UTM
15. 2015 Chari Yap Hai Reduction of Equipment Unscheduled Downtime for Strip on Carrier Operation by Implementing Total Productive Maintenance
M.Sc (Engineering Business Management)
UTM
16. 2014 Atiqah Md Desa Ergonomics Risk Assessment on Maintenance Workers in a Semiconductor Company
Exec. Master (Occupational Safety and Health Management)
UTM
17. 2014 Devanbu M. Siluvaiyah
Ergonomic Evaluation of Pallet Trolley
M.Sc (Engineering Business Management)
UTM
18. 2014 Ahmad Naguib Shaari
Process Balancing at Cylinder Block Machining by using Yamazumi Method
M.Sc (Engineering 1Business Management)
UTM
19. 2014 Kamaruzaman Shaari
Lean Process in Product and Process Validation for Malaysian Automotive Industry
M.Sc (Engineering Business Management)
UTM
20. 2014 Rofi Ismail Penilaian Ergonomik terhadap Operator Penguji dalam Operasi Pengendalian Kotak Pembawa secara Manual di Syarikat Semikonduktor
Exec. Master (Occupational Safety and Health Management)
UTM
21. 2014 Hemapathy Pasunagi
Assessment on Ergonomic Risk Factor of Pneumatic
Exec. Master (Occupational
UTM
13
Air Screwdriver at Robert Bosh Pwer Tools
Safety and Health Management)
22. 2013 Zulkeflay Jamahari
An Effective Maintenance Management of Main Battle Tank (MBT) PT 91 for Malaysian Army
M.Sc (Engineering Business Management)
UTM
23. 2012 Mohd Nadzir Paiman
Improvement of Science Fund Evaluation Process in MIMOS Berhad using Quality Tools and Techniques
M. Sc (Engineering Business Management)
University of Warwick, UK
24. 2012 Atikah binti Basri
Permit to Work (W.T.P) Safety Management
Exec. Master (Occupational Safety and Health Management)
UTM
25. 2012 Ahmad Mukrim Abdullah
Safety Practice among Contract Workers in Perpective of Petronas Staffs at Kerteh Compressor Station
Exec. Master (Occupational Safety and Health Management)
UTM
26. 2012 Hii Tiing Poh Implementing Risk Assessment on Offshore Shipping Companies in Miri
Exec. Master (Occupational Safety and Health Management)
UTM
27. 2012 Tiong Kwong Heng
International Safety Management (ISM) Code: A Tool to Improve Safety Performance of Offshore Shipping Companies in Miri
Exec. Master (Occupational Safety and Health Management)
UTM
28. 2012 John Justin Hasnan Ajus
Enhancement of High Pressure Hydrocarbon Fluid Sample Collecting in Baronia Oil Complex
Exec. Master (Occupational Safety and Health Management)
UTM
29. 2011 Pang Chee Kong Effectiveness of enterprise resource planning system implementation in supporting the lean manufacturing practice
M. Sc (Engineering Business Management)
University of Warwick, UK
30. 2011 Ruslan Mamat Evaluating the Competency of Technicians in Mercury Handling at Onshore Gas Terminal (OGT), Kerteh
Exec. Master (Occupational Safety and Health Management)
UTM
31. 2009 Jetanthi V. Raman
Improvement in Human Factors of Quality
M. Sc (Engineering
University of
14
Management in a Semiconductor Industry
Business Management)
Warwick, UK
POSTGRADUATE EXAMINATION /VIVA/PROPOSAL EVALUATION
UTM STUDENTS/VIVA
MASTER (M.PHIL) INTERNAL EXAMINER
04/09/2016 Mohd Akhir Aman Shah, Thesis: Experimental of Lightweight Brake Disc Rotor for Road Vehicle, UTM Razak School.
20/01/2015 Muhammad Khairul Khalid, Thesis: Analysis of Self-Piercing Rivet (SPR) on a Thin-Plate Structure, MJIIT.
12/07/2013 Izyani Mohd Yazid, Thesis: New Magnetorheological Damper Using Combination of Shear and Squeeze Working Mode, MJIIT.
PHD VIVA ASISTANT CHAIRMAN
Date Student
04/04/2018 06/05/2016 25/02/2015 09/06/2015 09/09/2015
Fazimah Mat Noor, UTM Razak School Salah Mahdi Ali, Faculty of Mechanical Engineering Shahrokh Shahraki, Faculty of Mechanical Engineering Bijan Ganji Jameshooran, Faculty of Mechanical Engineering Mohd Yazid Abu, Faculty of Mechanical Engineering
DOCTORATE / PHD PROPOSAL EVALUATION PANEL
Date
Student Research Proposal Title Faculty
30/04/2019 Izwan Hamidi Mohamad Hairani
Bond Slip Behaviour of Fly Ash and Slag Based Geopolymer Concrete
Razak Faculty
15
02/05/2019 Ali Salim Abdullah Al Tooqi
The Impact of Disruption Factors on The Efficiency of Fuel Transportation of Petroleum Marketing Companies in Oman
Razak Faculty
31/05/2018 Mohd Affendy Amir
Operational Excellence Program for Upstream Brown Field Through Effective Onshore and Offshore Operation and Maintenance Interface Collaboration
UTM Razak School
28/05/2018 George De Cruz Prioritizing and Budgeting of Maintenance Activities in a Cement Kiln
UTM Razak School
02/05/2018 Kumaresan Magaswaran
Enhancing Low Frequency Performance of Acoustic Black Hole (ABH)
MJIIT
02/05/2018 Ahmad Ashraf Ahmad Ali
Consumes Perception Towards the Remanufacturing Goods in Automotive Industry
UTM Razak School
02/05/2018 Nor Azlina Ahmad Zaini
Development of Green Supplier Selection Model for Public Projects Using Integrated Delphi-Analytic Network Process (ANP)
UTM Razak School
03/05/2018 Jap Jee Siang Condition Monitoring of Turbomachinery Using Data Fusion Technique in Convolutional Neural Networks
UTM Razak School
03/05/2018 Nur Najmiah Jaafar
Bus Arrival Time Prediction Using Mahalanobis-Taguchi System
UTM Razak School
03/05/2018 Shahnaz Ali Abdalla Mohamed
Develop of The Delay Analysis Framework for Residential Building Construction in Abu Dhabi, UAE
UTM Razak School
21/11/2017 Mohamad Mahathir Mohamed Younos
Osh Management Framework For Contractor Engagement in Design And Build Contract on Water Services
UTM Razak School
22/11/2017 Yap Jee Siang Condition Monitoring Of Turbomachinery with Deep Learning Approach
UTM Razak School
02/06/2016 Mahmudin Saleh
Sustainable Processing of Natural Fibres for Downstream Application
UTM Razak School
03/06/2016 Ravi Krishnan Process Optimization of Flexible Polyurethane Foam Using Taguchi Method
UTM Razak School
24/05/2016 Lee Mao Rui Contractor’s Key Performance Indicators for Housing Construction Project in Malaysia
UTM Razak School
15/11/2016 Suraya Mohamad Nadzir
Effect of High Temperature Steam Oxidation on Creep Properties of T91 Superheated Tube for Boiler Application
UTM Razak School
22/11/2016 Muhammad Khairul Ruslan
Memantapkan Budaya Keselamatan di Firma Pembinaan Melalui Pelaksanaan Sistem Pengurusan Keselamatan Dan Kesihatan Pekerjaan (OHSAS 18001:2007)
UTM Razak School
22/11/2016 Tan Hong Wai Lean Management System for Improving Inventory Turnover at New Edge Sdn. Bhd.
UTM Razak School
16
06/12/2016 Azmil Md Hassim
Operational Modal Analysis Based on Deflection Mode of Operational Complex Pipeline System
UTM Razak School
18/11/2016 Aziizur Rahman Abdul Aziz
Acoustical Performance of Kenaf / Polypropylene / Epoxy Composite as a High Acoustic Absorber / Barrier At Aircraft Hangar
UTM Razak School
15/11/2016 Fadhilah Abdul Razak
Investigation of Dual Piezoelectric Fans with Magnetic Fans on Electronic Cooling System
UTM Razak School
06/12/2016 Ooi Ching Sheng
Health Monitoring of Underground Storage Tank (UST)
UTM Razak School
13/01/2015 Abdul Malek Abdul Wahab
Torsional Instability Analysis and Non-Linear Vibration od Shaft System under Parametric Excitation
MJIIT
Dec 2015 Mohd Omar Mukhtar Zainul Azmi
Bath Agitation Enhancement in Electroless Nickel Plating Processing Tank for Hard Disk Drive Manufacturing
Faculty of Mechanical Engineering
Dec 2015 Ravi Krishnan Process Optimization of Flexible Polyurethane Foam Production, Using Taguchi Method
UTM Razak School
Dec 2015 Liew Chee Leong
Effective Adoption of Strategic Management Process in An Aviation Maintenance Repair and Overhaul Organization
Faculty of Mechanical Engineering
Dec 2015 Sideq Salleh Effects of Non-Spherical Colloidal Silica Slurry Shape, Size and Particle Distribution On Al-Nip Hdd Substrates CMP Application
Faculty of Mechanical Engineering
Dec 2015 Clement C.Scully
Risk Based Dynamic Scheduling and Tracking Using Fuzzy Method
Faculty of Mechanical Engineering
Dec 2015 Muhamad Suhaimi Deris
Conditioned Air and Thermal Comfort in Operating Theater Room in Malaysia Climate Condition
Faculty of Mechanical Engineering
Dec 2015 Nor Azizi Mazalan
Coal Fired Power Plant Process Modeling Utilizing Actual Plant Data Based on Neural Network Algorithm
Faculty of Mechanical Engineering
30/04/2015 Sofyan Djamil Pencirian Komposit Matriks Polimer Bertelulang Gentian Semulajadi Bulu Giganchtolioa Apus
UTM Razak School
26/11/2015 Kambiz Ghafourian
Sustainable Measurement Model For Construction And Demolition Waste Management In Malaysia
UTM Razak School
15/12/2014 Azianashima A Continuous Squeeze Mode Magnetorheological Damper
MJIIT
07/12/2015 Ahmad Aizuddin Abd Aziz
Fundamental Investigation Aspherical Lens Mould Lapping
MJIIT
17
15/12/2014 Ubaidillah Functional Behaviour of Novel Waste Base Magnetorheological Elastomer in Compression Mode
MJIIT
28/04/2014 Ayad Omran Abdalla
Effect of Treatment on the microstructure and Mechanical Properties of Ti-6A1(1-3 wt %) Fe alloys for Aerospace Applications
UTM Razak School
28/04/2014 Mohamed Hanafiah Omar
Piezoelectric Vibration Energy Harvester: A Design Configuration for Wireless Sensor Nodes
UTM Razak School
24/11/2014 Nurul Hazwani Mohamad Hanafi
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Service-exposed Ni-Cr Superalloy Turbine Blade
UTM Razak School
04/12/2014 Halim Shah Hamzah
Automotive Core Component Price Determination Using Expert System
UTM Razak School
17/01/2013 Liza @ Sri Redzeki Mohd Anuar
Establishment of Proton Accelerated Corrosion Test Procedures
UTM Razak School
08/01/2013 Ali Mohammed Said Alraqadi
Knowledge of Competencies, Through Multi-Method Choice to Boost Fleet Support with Specific Reference to Omani Dockyard
UTM Razak School
08/01/2013 Nasuha Lee Abdullah
Impact of Operational Complexity in Quality Management Practices- Performance Relationships in Malaysian Electrical and Electronics Manufacturing Industry
UTM Razak School
08/01/2013 Zuraimi Zakariah
3D Images for Asset Management: A Case Study for Hospital Management
UTM Razak School
08/01/2013 Rajeshparan Rangaraj
Performance Management Re-Invention Integrating Organizational Communication Upon Business Transformation
UTM Razak School
07/01/2013 Hanida Abdullah
Online Modelling and Performance Prediction for Noise Reduction of Exhaust Muffler
MJIIT
23/11/2012 Mohd Nazir Abd Rahman
Lean Process using TRIZ UTM Razak School
MASTER (M. PHIL) PROPOSAL EVALUATION PANEL
Date
Student Research Proposal Title Faculty
26/04/2019 Aezal Muhammad Faim Zainol Abidin
Oxidation Behaviour of Ti-6Al-(1-3)Wt% Fe at Temperature between 650 oC to 850 oC
Razak Faculty
18
07/05/2018 Cassandra Gail R Al Gopera
Hybrid Renewable Energy: Tidal Current Turbine & Solar Power Electrification One Fathom Bank Malaysia
UTM Razak School
30/05/2017 Dewi Utami Durability of Magnetorheological Fluid on Magnetorheological Valve
MJIIT
23/11/2017 Mohamad Ikhwan Bin Ibrahim
Properties Enhancement of Chemically Retted Kenaf Fiber in Kenaf/Polypropylene Composites Using Response Surface Method
UTM Razak School
20/11/2017 Law Jieh Design Of Mold Runner System for Relay Components via Plastic Injection
UTM Razak School
10/05/2016 Mohd Dasuki Yussof
Research Title UTM Razak School
10/05/2016 Mohd Fadzil Hassan@Ismail
Research Title UTM Razak School
28/04/2016 Nurul Liyana Burhanuddin
Research Title MJIIT
13/05/2016 Yusli Mohamad Yunus
Research Title UTM Razak School
27/11/2015 Sandafaye Sone Numerical and Experimental Modal Verification of Vibration Characteristic in Automotive Crankshaft
MJIIT
15/04/2015 Muhammad Faiz Wahab
Development of New Lapping Technology for Aspheric Lens using CNC Machine
MJIIT
23/04/2014 Nor Amyra Hana Mohd Yusoff
The Effects of Operating Parameter on a Highly Efficient Pem Electrolyzer in Hydrogen Production
MJIIT
ACADEMIC RECOGNITIONS AND LEADERSHIP
PROFESSIONAL MEMBERSHIP
1. Professional Technologist (P. Tech. ) (MBOT)
2. Member of Project Management Institute (PMI)
3. Member of IEEE
4. Graduate Member Board of Engineers, Malaysia
5. Graduate Member Institution of Engineers Malaysia (IEM)
19
INTERNATIONAL:
1. Part time lecturer, SAFAT Academy Khartoum Sudan, Mac 2018.
2. Part time lecturer, Graduate School of Business Administration, Meiji University, Japan.
– 2014- Now
3. Master Project Evaluation Panel, Graduate School of Business Administration, Meiji
University, Japan. – 2014 – Now
4. Session Chair, International Conference on Advances in Materials & Processing
Technologies, (AMPT2011), Istanbul 2011
5. Master Dissertation Supervisor, University of Warwick, 2009 – 2012
6. Committee Member, Malaysia-Japan International Symposium on Advanced
Technology (MJISAT 2007)
NATIONAL:
1. Research University Grant Reviewer, 2010 – Now
2. Part Time Lecture, KLIA Professional & Management College, 2016 – Now
3. Taskforce for development of “Industry 4.0 Production Line Standard”, SIRIM,
November 2017
4. Evaluation Panel for Diploma of Mechanical Engineering (Design), Kolej Yayasan
Pelajaran Johor (KYPJ), 27/08/2017
5. Board of Study, Kolej Yayasan Pelajaran Johor, 2013 – Now
6. Curriculum Development Panel for Community College, Ministry of Higher Education
and UTMSPACE, 2011 7. Part Time Lecturer, National Defense University (UPNM), 2008 – 2012
8. Ad-Hoc Academic Programme Evaluation Panel for JPA Recognition, Diploma of
Mechanical Engineering (Material and Textile), Politeknik Pasir Gudang and Politeknik
Seberang Perai, Malaysia Public Service Department (JPA), 2001
RESEARCH GRANT EVALUATION PANEL / REVIEWER
Date Project Name
Funder
2019 Fatigue Investigation On Developed Aluminum Alloy With Excess Magnesium For Automotive Applications.
GUP
2019 Design And Development Of Hybrid Bio-Nanocomposites Filament For Fused Deposition Modeling (Fdm) 3d Printing
GUP
20
2018 Low Cycle Fatigue Life Evaluation Of Thin Walled Bend Pipe Under Seismic Load Condition
GUP
2017 A Modified Gapped Smoothing Method For Detecting Horizontal And Vertical Crack
GUP
2017 Risk Assessment Frameworks Of Handling And Storage Of Cargo At Malaysia Ports.
GUP
2016 The Effect Of A Bluff Body On Air-Core Vortex Formation Inside Draining Tank
GUP
2016 Fabrication Of Kekabu (Ceiba Pentandra) Fibre Loaded With Silver Nanoparticles By Green Method For Medical Application.
GUP
2012 Surface Orientation Control of Pits Formed in Si(100) during SiC Epitaxial Growth on Simox Substrates Utilizing CVD Jet Pulse for Nanopore Application
MJIIT
COMMITTEE IN UTM
1. Lecture on How to Get Yourself Employed (HTGYE), 2015 – Now
2. Evaluation Panel for UTM Razak School Grant, March 2017
3. Committee Member for Academic, UTM Razak School, 2017 – Now
4. Committee Member of Marketing UTM Razak School, 2017 – Now
5. Committee member of Technical Specification for UPMU Tender and Quotation,
2017-Now
6. Committee member of Technical Specification for MJIIT Tender, UTM, 2014-Now
7. Committee member for Master Programme Development (MSc in Maintenance
Engineering), UTM Razak School of Engineering and Advanced Technology, 2011 –
2014
8. Committee Member for Administration, UTM Razak School of Engineering and
Advanced Technology, 2010 – 2012.
9. Committee Member for Post-Graduate Study, UTM Razak School of Engineering and
Advanced Technology, 2010 – 2012.
10. Committee Member for Academic, UTM Razak School of Engineering and Advanced
Technology, 2010 – 2012
11. Talk on OBE awareness for Mechanical Engineering (Industry) – Bachelor Degree
student. 4 March 2011
12. Committee member for Graduation Ceremony for UTM Razak School of Engineering
and Advanced Technology – 2010/2011
13. Pro-Tem MJIIT – 2010
14. Committee Member for Administration, College Science and Technology, 2008 –
2010.
15. Committee Member for Academic, College Science and Technology, 2008 – 2010.
16. Committee for “Task Force on Malaysia-Japan International Institute of Technology
(MJIIT), 2009 -2010.
21
17. Head of Thermodynamic Laboratory, 1998-1999
18. Head of Manufacturing Laboratory, 2000 – 2002
19. Subject coordinator for Manufacturing Processes
20. Coordinator for Diploma of Mechanical Technology subjects (Automotive, Military
Automotive and Manufacturing)
21. Committee for New Curriculum Development for Diploma of Mechanical Engineering
and Diploma of Mechanical Engineering (Aeronautic)
22. Coordinator for Industrial Training for mechanical engineering students, 1997-1999
23. SPACE Programme coordinator for Diploma in Mechanical Engineering (Johor Bahru
and Kuala Lumpur)
24. Panel of Forum “so… do you plan to do a PhD, March 2007
25. Committee for Academic Guide Book for College of Science and Technology UTM,
2007
26. Author and Examiner for Staff Competency Examination (PTK) questions. (2008 –
2010).
27. Head of Production Workshop and FMS Laboratory, November 2007 – 2008
28. Paper reviewer for the Malaysian-Japan International Symposium on Advanced
Technology 2007 (MJISAT 2007), 12-15th November 2007.
29. Head of Panel for Manufacturing and Industry subjects in Mechanical Engineering
Department.
30. Head of Post Graduate Program for Mechanical Engineering Department, College of
Science and Technology UTM, 2008
31. Committee for the Quality Assurance (MQA) in College of Science and Technology
UTM, 2007 – 2009.
32. Facilitator for Motivation Workshop for New Student (TLDM). 24-27 October 2008.
33. Lecturer for UTM off-campus (SPACE) program. 1998 – present
34. Part Time Lecture for Bachelor Mechanical Engineering, UPNM. 2006 - 2010
ACCREDITATION ACTIVITIES
1. Auditor for UTM Razak School Training Provider (Executive Diploma Programme),
2010 - Now
2. Committee member of MQA document preparation for MQA Accreditation Audit at
UTM Razak School (Master and Executive Diploma Programmes) 2011 – Now
3. Head / Panel of Quality audit for UTM Diploma Joint Programme to the Joint UTM
Colleges (ITP-YPJ, IKIP, KYS, PIT-Ipoh, BESTARI International, PSDC) 2008-2010.
4. Committee member of MQA document preparation for MQA Accreditation Audit for
UTM Diploma Programme at Kolej Tentera Udara (KTU) Alor Setar, 2009.
5. Represent UTM for defending JPA/LAN Audit at IKM Pasir Mas for UTM Diploma Joint
Programme, 2000
22
6. Represent UTM for defending JPA Audit at Institut Tentera Darat (IJED) Port Dickson
for UTM Diploma Joint Programme, 2009.
7. Ad-Hoc Evaluation Committee for New Politeknik’s Diploma in Mechanical
Engineering (Materials and Textiles) for JPA approval, 2001.
8. Represent UTM for defending MQA Audit at Twin-Tech International College Sarawak
for UTM Diploma Joint Programme, 2009.
COMMUNITY SERVICES
1. Community Service: Deputy Chairman Surau Al-Hidayah, Kg Nakhoda Batu Caves, Selangor Darul Ehsan, 2020 – now.
2. Community Service: Committee Member for Surau Al-Hidayah, Kg Nakhoda Batu Caves, Selangor Darul Ehsan, 2010 – 2019
3. Community Service: Secretary General for Surau Al-Hidayah, Kg Nakhoda Batu Caves, Selangor Darul Ehsan. (Session - 2010/2013).
4. Auditor for practising 5S in UTM Kuala Lumpur, 2006-2008 5. Committee Head of Social and Religious, Malaysian Student Club, Glasgow UK, 2005 6. Head of Youth, Malaysian Student Club, Glasgow UK 2004
ARTICLE REVIEWER
No Date Journal/Conference Title Publisher
1. 2017 Journal of
Advanced Research
Design
Tensile Properties for
Treated Single Kenaf
Fiber
Penerbit
Akademia
Baru
2. 2016 Journal of
Advanced Research
Design
Tensile Properties for
MWCNT Filled Jute-
Epoxy Composites
Penerbit
Akademia
Baru
3. 2016 Jurnal Teknologi Isolation and
identification of
Actinobacterial
biosurfactant producers
Penerbit UTM
4. 2016 Journal of
Advanced Research
Design
Bamboo composite
welding cart conceptual
design for oil and gas
industry
Penerbit
Akademia
Baru
23
5. 2016 Jurnal Teknologi Evaluating the Effect of
Temperature and
Humidity on Energy
Saving in Residential
Buildings using Design of
Experiment and Building
Simulation
Penerbit UTM
6. 2016 Journal of
Advanced Research
Safety Culture Quality in
Royal Malaysian Air
Force (RMAF)’s Hangar
Penerbit
Akademia
Baru
7. 2016 Jurnal Teknologi Innovation in
Argricultural support on
sustainablity for fresh
fruit bunch (FBB) of
Elais guineensis in
malaysia using
Penerbit UTM
8. 2016 Jurnal Teknologi Effects of number of
connections and pipe
length to the water
losses in melaka
Penerbit UTM
9. 2015 Jurnal Teknologi Performance of the
ocean thermal energy
conversion cycle
according to different
working fluids
Penerbit UTM
10. 2015 Jurnal Teknologi Effect of ascorbic acid
and ferum ions
concentration on the
hydrolysis of
glucosinolate and
myrosinase activity in
the watercress
(nasturtium officinale
sp.)
Penerbit UTM
11. 2015 Jurnal Teknologi Enhancing hydrogen
production in an ocean
thermal energy (OTEC)
system through the use
of a solar collector
Penerbit UTM
24
12. 2014 Journal of Transport
Engineering
Product realization and
development an
application of advance
product quality planning
(APQP) in Malaysian
automotive suppliers
Penerbit
Akademia
Baru
13. 2013 International
Conference of
Mechanical &
Manufacturing
Engineering, ICME
2013
Feasibility Study of
Additive Manufacturing
Technology
Implementation in
Malaysian Automotive
Industry using Analytical
Technology Hierarchy
Process
Universiti Tun
Hussein Onn
Malaysia
(UTHM)
14. 2013 ICRQE 2913 Chip Formation in the
Machining of Al-SiC/AIN
Matrix Metal Composite
(MMC) using the
Uncoated of Carbide
Tool
UTM Razak
School
15. 2013 Jurnal Teknologi The relationship
between Internal and
External R&D with
OperationalPerformance
moderated by
Intellectual Property
Rights: Chemical and
Metallurgical
Manufacturing Firms in
Malaysia
Penerbit UTM
16. 2013 Jurnal Teknologi A Bibilometric Review
and Analysis of Taguchi-
Centered Optimization
in Plastic Injection
Moulding
Penerbit UTM
17. 2013 Jurnal Teknologi Chip formation in the
Machining of Al-SiC/AlN
Matrix Metal Composite
(MMC) Using the
Uncoated of Carbide
Tool
Penerbit UTM
25
18. 2013 Jurnal Teknologi Influence of
Composition and
Sintering Temperature
on Density for Pure and
Titanium Alloy Foams
Penerbit UTM
19. 2012 International
Conference of
Mechanical &
Manufacturing
Engineering,
ICME2012
Effects of MIG welding
to corrosion behaviour
of carbon steel
Universiti Tun
Hussein Onn
Malaysia
(UTHM)
20. 2012 International
Conference of
Mechanical &
Manufacturing
Engineering,
ICME2012
Effect of corrosion on
the tensile properties of
a 0.4%C steel exposed to
seawater
Universiti Tun
Hussein Onn
Malaysia
(UTHM)
21. 2011 International
Conference on
Modeling,
Simulation and
Applied
Optimization, 2011
A Simulation
Optimization approach
to Un-paced Assembly
Line Balancing Problem-
II with additional
Reworking issue
IEEE
22. 2011 International
Conference on
Modeling,
Simulation and
Applied
Optimization, 2011
A new DEA model for
supplier’s selection
IEEE
23. 2011 International
Conference on
Modeling,
Simulation and
Applied
Optimization, 2011
A Solution approach for
the Stochastic Airport
Bus Routing Problem
IEEE
24. 2010 The Journal of The
Institution of
Engineers Malaysia
Thermal comfort
Assessment at parcel
and logistic industry: A
field study in Malaysia
The Institution
of Engineers
Malaysia
26
25. 2010 The Journal of The
Institution of
Engineers Malaysia
Correlation between job
satisfaction level and
workstation design: A
survey at Malaysian
Automotive Industry
The Institution
of Engineers
Malaysia
26. 2009 Chiang Mai Journal
of Science
Microstructural
restoration by HIP and
heat treatment process
in cast nickel based
superalloy, IN-738
Faculty of
Science,
Chiang Mai
University
27. 2008 The Journal of The
Institution of
Engineers Malaysia
Design and analysis of 8
and 16 cavity of
traditional for plastic
injection mould
The Institution
of Engineers
Malaysia
28. 2008 The Journal of The
Institution of
Engineers Malaysia
Review on the
machining of cast iron
The Institution
of Engineers
Malaysia
29. 2008 The Journal of The
Institution of
Engineers Malaysia
Development of heat
treatment process
through microstructural
control in 2017
aluminium alloy for
aerospace application
The Institution
of Engineers
Malaysia
30. 2007 Malaysia-Japan
International
Symposium on
Advanced
Technology 2007
(MJISAT 2007)
Oil leakage form tapered
seal of fluid film bearing
College of
Scince and
Technology
UTM
31. 2007 Malaysia-Japan International Symposium on Advanced Technology 2007 (MJISAT 2007)
Fluid dynamics behavior
and flow visualization
between film and roller
for transporting films
College of Scince and Technology UTM
32. 2007 Malaysia-Japan International Symposium on Advanced Technology 2007 (MJISAT 2007)
Measurement of oil film
and visualization of real
contact area
College of Scince and Technology UTM
33. 2007 Malaysia-Japan International
Empirical equation
analysis for effects of
College of Scince and
27
Symposium on Advanced Technology 2007 (MJISAT 2007)
surface profile on oil
film pressure under
sliding condition with
model
Technology UTM
34. 2007 Malaysia-Japan International Symposium on Advanced Technology 2007 (MJISAT 2007)
Importance of crack tip
stress shielding effect on
fatigue crack growth
resistance
College of Scince and Technology UTM
35. 2007 The Journal of The
Institution of
Engineers Malaysia
IGBT Induction
hardening and its
application in Singapore
The Institution
of Engineers
Malaysia
36. 2007 The Journal of The
Institution of
Engineers Malaysia
Silicon carbide: Power
devices and applications
The Institution
of Engineers
Malaysia
RESEARCH / IP /CONSULTATION / SPIN OFF COMPANY
RESEARCH PROJECT
No Date Title
Role Amount
1. 01/10/2019 – 28/02/2021
Data Quality Management (DQM) System Framework
Principle Investigator
RM 15,000
2. 01/07/2017-30/09/2018
Modelling of interface particle bonding on End of Life (EoL) vehicle parts substrate using HVOF thermal spray coating, RUG, Vot: 14J05
Principle Investigator
RM 20,000
3. 01/04/2017 - 30/06/2018
Research-Based Foundation for Sustainable Agriculture Entrepreneurship (“SMART RURAL”), KETENGAH, Total Budget: RM400,000 (Stated in UTM – KETENGAH MoA) Sub Project: Engineering System (Chicken Coop)
Project Leader
RM 35,000
4. 01/05/2015 - 31/07/2016
Kinesthetic Approach to Validate Work Movement Task Analysis Observational Tool, RUG, Vot: 10J96
Principle Investigator
RM 20,000
5. 15/05/2011 - 14/05/2013
Design Of Ultrasonic Horn For Powder Metal Compaction, Razak School Grant, Vot: 4B028
Principle Investigator
RM 50,000
28
6. 01/05/2010 - 30/11/2011
Simulation of Static and Ultrasonic Compression, SEED, Vot: 3T157
Principle Investigator
RM 20,000
7. 20/08/2017 - 20/05/2018
Oil Palm Fruit Loading using Automatic Loader, PPRN, Vot: 4L425
Member RM 47,000
8. 15/08/2017 - 14/08/2020
Virtual Reality Concept for Project Manager's Competency Enhancement, FRGS, Vot: 4F951.
Member RM 102,184
9. 01/08/2017 - 31/07/2019
Safety Security Management Plan to Curb Football Fans Hooliganism at Stadium, Razak School Fund, Vot: 4J297
Member RM 32,000
10. 01/07/2017 -30/06/2019
Investigate of Sustainability Hybrid Renewable Energy System: Ocean Current Turbine & Solar Power System Electrification on One Fathom Bank Malaysia, RUG, Vot: 17H56
Member RM 40,000
11. 01/07/2017 - 30/06/2019
Fundamental Development of Low Cost Highly Efficient Solar Photovoltaic System via Mathematical Simulation of Newly Designed Solar Concentrator, RUG, Vot: 16H95.
Member RM 40,000
12. 01/08/2016 - 31/07/2018
Mercerisation Treatment Enhancement of Kenaf Fiber/Polypropyelene Composites using Box-Behnken Design, FRGS, Vot: 4F880.
Member RM 88,000
13. 01/08/2016 - 31/07/2018
Theoretical Model of Core Acquisitions for Durable Products Return, FRGS, Vot: 4F819.
Member RM 82,000
14. 01/10/2016 - 30/09/2018
Improvement of Changeover Times Through Integrating of SMED Method with QFD Techniques for Semiconductor Industry, RUG, Vot: 15H70.
Member RM 40,000
15. 01/10/2016 -30/09/2018
Enhancement of Mahalanobis Taguchi System Based on Swarm Intelligence for Multivariate Pattern Recognition, RUG, Vot: 15H43
Member RM 40,000
16. 01/10/2016 - 30/09/2018
Feasibility Study Aiming at Identifying the Potential Opportunities of Developing a Pioneer Underwater Ocean, Turbines Power Plant on The One Fathom Bank, GUP, Vot: 15H31
Member RM 40,000
17. 06/04/2016 - 05/04/2017
Membangunkan Mikro Turbin Banki Secara Lestari bagi Mempertingkatkan Taraf Hidup serta Eko-Pelancongan di Kampung Sungai Tiang,Taman Negeri Royal Belum, CCIN, Vot: 4L192
Member RM 100,000
18. 01/05/2015 -30/07/2016
Indentation Response of Kenaf/Polypropylene Corrugated
Member RM 20,000
29
Sandwich Structures Subjected to Quasi-Static and Dynamic Loading, RUG, Vot: 11J01.
19. 01/07/2014 - 31/12/2015
Characterization of Mahalanobis-Taguchi System and Bees Algorithm for Diagnosis and Forecasting in Multidimensional System, FRGS, Vot: 4F535.
Member RM 52,000
20. 01/11/2014 - 31/12/2015
Low Velocity Impact Response of Kenaf/Epoxy Corrugated Sandwich Structures, PAS, Vot: 01K15.
Member RM 20,000
21. 01/04/2014 - 31/03/2015
Development of New Lapping Technology for Aspherical Lens Mold Using CNC Machine, RUG, Vot: 09J99
Member RM 49,500
22. 01/04/2014 - 31/03/2016
Complex Engineering System Maintenance with Sensor Fusion Algorithm, RUG, Vot: 06H51
Member RM 50,000
23. 01/06/2013 -31/05/2015
Adaptation of Dempster-Shafer Evidence Theory for Reliability and Safety Enhancement of Aging Oil Rig Equipment, ERGS, Vot: 4L089
Member RM 105,000
24. 01/06/2013 - 31/05/2014
The effectiveness of superimposed ultrasonic excitation on sheet metal, RUG, Vot: 00K44
Member RM 20,000
25. 15/12/2012 - 14/12/2014
Context-Specific Information Delivery for Building Maintenance of Institution of Higher Education in Malaysia, NAPREC, Vot: 4B086
Member RM 198,440
26. 01/04/2012 -31/03/2014
Characterization of Polyethylene Terephthalate (Pet) Waste as Sustainable Binder for Metal Injection Molding, FRGS, Vot: 4F124
Member RM 90,820
27. 01/05/2012 - 30/04/2013
Developing Sustainable Binder for Metal Injection Molding using Recycle Materials, RUG, Vot: 06J50
Member RM 50,000
28. 01/06/2011 – 01/06/2013
Using larger flaw sizes as acceptable criteria for aerostructure applications, PAS, Vot: 4P019
Member RM 20,000
29. 15/11/2015 - 14/11/2017
Ageing Assets Health Monitoring in Oil & Gas Industry, RUG, Vot: 50,000
Member RM 50,000
30. 01/03/2013 - 06/02/2016
An Attempt to Replicate the Composition of Zamzam Water by Processing Deep Sea, RUG (FLAGSHIPS), Vot: 00G62
Member RM 400,000
31. 01/10/2016 - 31/12/2017
Acoustical Performance of Kenaf/Polypropelene Composite as a High Acoustic Absorber at Aircraft Hangar, RUG, Vot: 12J12
Member RM 20,000
30
32. 01/10/2016 - 31/12/2017
Investigation of Best Parameters to Obtain Optimal Performance of Fully Functioned Crossflow Micro-Turbine to be Used by Orang Asli in Remote Area, RUG, Vot: 12J01
Member RM 20,000
33. 16/04/2010 -15/04/2012
Development of Systematic Recycle PA 2 in Laser Sintering Process Towards Green Manufacturing, FRGS
Network Grant (IIUM)
RM 32,000
PATENT AND COPYRIGHT 1. Mohd Yusof Md Daud, Mohd Zubairy Shamsudin,Work Measurement Task Analysis, Copyright,
January 01, 2018.
2. Shamsul Sarip, Mohd Nabil Muhtazaruddin, Sa’ardin Abdul Aziz, Mohd Yusof Md Daud,
Mohamed Azlan Suhot, Roslina Mohammad, Mohamad Zaki Hassan Micro-Hydro Turbine
Design, Copyright, April 21, 2016.
3. Rosmah Ali, Norihan Abu Hassan, An Instrument to Measure ICT User-Skill for Engineering
Learning, Copyright, May 02, 2013.
4. Mohd Yusof Md Daud, Aminudin Abu, Zuraini Ismail, Apparatus ultrasonic tension test, MyIPO,
Patent number: PI 2009 2120, May 25, 2009.
CONSULTATION 1. Development New Blue Sky Project, Voith Paper Fabric Malaysia Sdn Bhd, April 2017 – Feb
2018 2. PETRON TANK Structural Simulation and Technical Analysis Report, MKM Expert Srvices, July
01 – September 01, 2016, RM20,000 3. Course Coordinator for UTMSPACE Join Programme, 2008 – Now 4. Final Exam Question Paper Preparation for UTMSPACE Join Programme 2008 -
Now
SPIN OFF COMPANY
ARUS INFINITI SDN BHD (Reg. No: 1236477 – P) No. 5-1, Jalan SL 1/12, Bandar Sungai Long, 43000 Kajang, Selangor. POSTION: Director (10 % Share Ownership)
31
PUBLICATIONS / PAPER PRESENTED
THESIS
1. Mohd Yusof Md Daud, Experimental and Finite Element Investigation of Ultrasonic Metal Forming Application, PhD Thesis, University of Glasgow (2006)
2. Mohd Yusof Md Daud, Study on the Application of Thermal Spray Technique for Abrasion Purposes, Thesis, M. Sc (Materials Engineering), Universiti Sains Malaysia (2000)
MONOGRAPH
1. H.S. Hamzah, K.R. Jamaludin, M.Y. Daud, S.K.H.S.A. Bokharey, and S.N.M. Salim, Development of a technopreneurship readiness profiling tool for Industry 4.0, MTDC Research Project, Remanufacturing, Sustainable Production and Enterprise Center (RESPECT), Genichi Taguchi Quality and Sustainability Center, Razak Faculty of Technology and Informatics (formerly known as Razak School), Universiti Teknologi Malaysia (UTM), 2019.
2. Mohd Yusof Md Daud, Mohamad Zaki Hassan, Shamsul Sarip, Saardin Abdul Aziz, Research-based Foundation of Sustainable Agriculture Entrepreneurship: Close and Open Chicken Coop – A Literature Review, Lembaga Kemajuan Terengganu Tengah (KETENGAH)-UTM, 2019.
3. Mohamad Syazli Fathi, Abdul Karim Mirasa, Mohd Zulakhmar Zakiyudin, Shuib Rambat, Siti Uzairiah Tobi, Yusof Daud and Nor A‘Ini Rajab, Ontext-Specific Information Delivery for Building Maintenance of Institutions of Higher Education in Malaysia, Agreement no: NAPREC (R&D) 18/12, 2015.
4. Petron Structural Simulation and Technical analysis Report, Aroma UTM-Petron, 2016.
5. Kinesthetic Approach to Validate Work Movement Task Analysis Observational, Reserach University Grant Report, 2016
6. Design of Ultrasonic Horn for Powder Metal Compaction, Razak School Reserach Grant Report, 2014
7. Simulation of Static and Ultrasonic Compression, SEED Research Grant Report, 2012
8. Context-Specific Information Delivery for Building Maintenance of Institution of Higher Education In Malaysia, Research Grant Report, NPAREC Eastate Reserch Fund, 2012
JOURNAL / BOOK CHAPTER
32
1. Sheikh Ahmad Zaki, Nor Suhada Azid, Mohd Fairuz Shahidan, Mohamad Zaki Hassan, Mohd
Yusof Md Daud, Nor Azlina Abu Bakar, Mohamed Sukri Mat Ali and Fitri Yakub, Analysis of
Urban Morphological Effect on the Microclimate of the Urban Residential Area of Kampung
Baru in Kuala Lumpur Using a Geospatial Approach, Sustainability, Vol.12 (7301), 2020.
*(WoS & Scopus)
2. Sheikh Ahmad Zaki, Siti Wan Syahidah, Mohd Fairuz Shahidan, Mardiana Idayu Ahmad, Fitri
Yakub, Mohamad Zaki Hassan, and Mohd Yusof Md Daud, Assessment of Outdoor Air
Temperature with Different Shaded Area within an Urban University Campus in Hot-Humid
Climate, Sustainability, Vol.12(14), 2020. *(WoS & Scopus)
3. Mohamad Zaki Hassan, S. M. Sapuan, Zainudin A. Rasid, Ariff Farhan Mohd Nor, Rozzeta
Dolah, Mohd Yusof Md Daud, Impact Damage Resistance and Post Impact Tolerance of
Optimum Banana-Pseudo Stem, Applied Sciences, Vol.10, 2020, pp 1-23. *(WoS & Scopus)
4. Roslan, S.A., Hassan, M.Z., Rasid, Z.A., Bani, N.A., Sarip, S., Md Daud, M.Y., Muhammad-
Sukki, F., Mode I Fracture Toughness of Optimized Alkali-Treated Bambusa Vulgaris Bamboo
by Box-Behnken Design, Advances in Material Sciences and Engineering, ICMMPE 2018, 20
pp. 565-575. *(Scopus)
5. M. S. Ibrahim, M. Z. Hassan, I. Ibrahim, M. H. Ibrahim, M. Y. Daud and N. A. Bani, Life-cycle
Assessment on the Highway Street Lantern using Weibull Probability Approach, Journal of
Physics: Conference Series, Vol. 1150(01), 2019. *(WoS & Scopus)
6. Khalid, R., Daud, M.Y.M., Jusoh, A., Critical success factors maintenance strategy in industry
for technical vocational education training institute, Test and Engineering Management,
Vol.81(11-12), 2019, pp. 679-688. *(Scopus)
7. M. Subramaniam, M. Z. Hassan, M. F. Sadali, I. Ibrahim, M. Y. Daud, S. A. Aziz, N. Samsudin
and S. Sarip., Evaluation and Analysis of Noise Pollution in the Manufacturing Industry,
Journal of Physics: Conf. Series, Vol. 1150(01), 2019. *(WoS & Scopus)
8. P. Alagapan, M. Z. Hassan, M. H. Ibrahim, M. Y. Daud, N. A. Bani and R. M. Kutty.
Measurement of hazardous personal noise exposure in spice manufacturing industry.
Journal of Physics: Conf. Series, Vol. 1150(01), 2019. *(WoS & Scopus)
9. Muhalim, N.A.D., Hassan, M.Z., Daud, Y., Elastic-Plastic Behaviour of Ultrasonic Assisted
Compression of Polyvinyl Chloride (PVC) Foam, IOP Conference Series: Materials Science and
Engineering, 2018. *(WoS & Scopus)
33
10. Dzul Hafez Yacob, S. Sarip, M. A. Suhot, M. Z. Hassan, S. A. Aziz, M. Y. Daud, N. A. Bani, M. N.
Muhtazaruddin, Critical design factors on performance of car jack lifting operations,
Indonesian Journal of Electrical Engineering and Computer, Vol. 12, Issue 2, Nov 2018, pp.
521-526. *(Scopus)
11. Ibrahim, M.H.I.B., Hassan, M.Z.B., Ibrahim, I., Rashidi, A.H.M., Nor, S.F.M., Daud, M.Y.M.,
Seawater infiltration effect on thermal degradation of fiber reinforced epoxy composites,
AIP Conference Proceedings, Vol. 1958 (no. 020006), 2018. *(Scopus)
12. Nur Amanina Damira Binti Muhalim, Mohd Yusof Bin Md Daud, Mohamad Zaki Bin Hassan,
Sa’ardin Bin Abdul Aziz, Norazmein Bin Abdul Raman, Shamsul Bin Sarip, Compressive
Behaviour and Energy Absorption of Copper Tube under Quasi-Static and Ultrasonic
Compression Test, Journal of Mechanical Engineering, Vol. SI 3 (1), 2017, pp. 169-184.
*(Scopus)
13. Noor’Ain Zainal Abidin, Mohamad Syazli Fathi, Mohd Yusof Md Daud, Harmi Izzuan Baharum,
Exploring Acceptance of Game Based Learning from Malaysian Government Professionals'
Perspectives, European Proceedings of Social and Behavioural Sciences, 2018. *(WoS)
14. Noor’Ain Zainal Abidin, Mohamad Syazli Fathi, Mohd Yusof Md Daud, Harmi Izzuan Baharum,
Project Practitioners’ Competency in Malaysian Construction Industry, Sains Humanika, Vol.
9, No. 1-4, 2017.
15. Siti Nadia Mohd Bakhori, Mohamad Zaki Hassan, Feiruz Ab’lah , Aadil Nausherwan, Mohd
Azlan Suhot, Mohd Yusof Daud, Shamsul Sarip , Zarini Ismail, Noise measurement and
awareness at construction site – A Case Study, Journal of Advanced Research Design, Vol.
31, Issue.1 (2017) pp. 9-16.
16. Mohd Yusof Md Daud, Norazmein Abd Raman, Ultrasonic Compaction of Stainless Steel
Powder Metallurgy, Materials and Testing of Mechanical Engineering (Book Chapter),
Penerbit UTM Press, 2016, pp. 21-32. *(Scopus)
17. Daud, Y., Hassan, M.Z., Sarip, S., Raman, N.A., Jamaludin, K.R., Mechanical properties of
quasi-static and ultrasonic compaction of stainless steel powder metallurgy, ARPN Journal of
Engineering and Applied Sciences, 2016. *(Scopus)
18. Mohd Z. Shamsudin, Mohd Y. Daud, Mohd. J. A. Mustafa, Mohd. A. Arshad, Romizan Jathin,
Mohd. S. D. Mahad, Development and Validation of Work Movement Task Analysis: Part 2,
ARPN Journal of Engineering and Applied Sciences, Vol. 11, No. 10, 2016. *(Scopus)
34
19. Abu Bakar, M.S., Hassan, M.Z., Bakhori, S., Daud. Y, Sarip, S., Ismail, Z., Improvement of
universal parts for pick and place machine in semiconductor industry using QFD approach,
Journal of Engineering and Applied Sciences, 2016. *(Scopus)
20. S. Bakhori, M. Z. Hassan, Y. Daud, S. Sarip, N. Rahman, Z. Ismail, S. A. Aziz, Mechanical
behavior of Kenaf/Epoxy corrugated sandwich structures, IOP Conference Series: Materials
Science and Engineering, Vol. 100 (1), 2015. *(WoS & Scopus)
21. Z. Abidin, N. Ain, M. S. Fathi, M. Daud, M. Yusof, A Preliminary Study on the Learning
Perspective at Malaysia's Government Technical Department, Applied Mechanics and
Materials, 2015. *(Scopus)
22. Shahril Bin Noh, Mohd Yusof Bin Md. Daud, Rosmah Binti Ali, Conceptual framework for
development of an instrument to measure students' CNC machining skill, IEEE International
Conference on Teaching and Learning in Computing and Engineering (LATICE 2014), 2014,
pp: 182-185. *(Scopus)
23. Y. Daud; N.A. Raman; S.A. Aziz; K.R. Jamaludin, Design of ultrasonic compaction tool for
powder metallurgy, Applied Mechanics and Materials, Vol. 465-466, 2014, pp. 1016-1020.
*(Scopus)
24. Pang Chee Kong, Yusof Daud, Effectiveness of enterprise resource planning system in
supporting the lean manufacturing, Applied Mechanics and Materials., Vol. 315, 2013, pp.
899-904. *(Scopus)
25. Yusof Daud, Khairur Rijal Jamaludin, Jeyanthi Vengatta Raman, Human Factor Issue in Quality
Management, Jurnal Teknologi, Vol. 59, 2012, Pg. 35- 308. *(WoS & Scopus)
26. Khairur Rijal Jamaludin, Mohd Shahriman Adenan, Mohd Yusof Md Daud, Norazmein Abd
Raman, Delaminating Control on Drilling the Medium Density Fiber Board with Robust
Optimization, Jurnal Teknologi, Vol. 59, 2012, pp. 99- 103. *(Scopus)
27. Daud, Y., Lucas, M., Jamaludin, K.R., Finite element modelling in ultrasonic sheet metal
forming, Advanced Materials Research, Vol. 445, 2012, pp. 3- 8. *(WoS & Scopus)
28. Jamaludin, K.R., Muhamad, N., Ahmad, S., Ibrahim, M.H.I., Mohd. Nor, N.H., Harun, M.R.B.,
Md. Daud, M.Y., Optimizing the sintering parameter of metal injection molding compact
using robust engineering technique. Advanced Materials Research, Vol. 445, 2012, pp. 357-
361. *(Scopus)
35
29. Daud, Y., Lucas, M., Jamaludin, K.R., Verification of interface friction of radial ultrasonic
compression using FE simulation, Journal of Applied Sciences, Vol. 11, Issue. 9, 2011, pp.
1600-1605. *(Scopus)
30. Jamaludin, K.R., Muhamad, N., Ahmad, S., Ibrahim, M.H.I. , Mohd Nor, N.H. , Daud, Y.,
Injection moulding temperature and powder loading influence to the metal injection
moulding (MIM) green compact, Scientific Research and Essays, Vol. 6, Issue. 21, 2011, pp.
4532-4538. *(Scopus)
31. Jamaludin, K.R., Muhamad, N., Rahman, M.N.A., Ahmad, S. , Ibrahim, M.H.I., Nor, N.H.M. ,
Harun, M.R. , Daud, M.Y.M., Multiple performance optimization for the best metal injection
molding green compact, Journal of Applied Sciences, Vol. 11, Issue. 9, 2011, pp. 1663-1667.
*(Scopus)
32. Khairur Rijal Jamaludin, Norhamidi Muhamad, M.N.A. Rahman, S. Ahmad, M.H.I. Ibrahim,
N.H.M.Nor and M.Y.M. Daud., Application of the Grey-Taguchi Method to the Optimization
of Metal Injection Molding (MIM) Process, Key Engineering Materials. Vol. 443, 2010, pp 63-
68. *(Scopus)
33. Lucas, M., Daud, Y., A finite element model of ultrasonic extrusion, Journal of Physics:
Conference Series, Vol. 181, Issue. 1, 2009. *(WoS & Scopus)
34. Ali, R., Hassan, N. A., Md Daud, M.Y., Information Literacy of Engineering Students: A Case
Study, IEEE International Congress on Engineering Education (ICEED2009), Kuala Lumpur,
Malaysia, Article number 5490595, 2009, pp.143-147. *(Scopus)
35. Daud, Y., Lucas, M., Chapter 3: Estimation of interface friction during radial ultrasonic
compression using finite element modeling, Advances in mechanical, manufacturing and
materials engineering, Penerbit UTM, 2008, ISSBN 9789835205637.
36. Daud, Y., Lucas, M., Huang, Z., Modelling the effects of superimposed ultrasonic vibrations on
tension and compression tests of aluminium, Journal of Materials Processing Technology,
Vol. 18, 2007, pp.179-190. *(WoS & Scopus)
37. Daud, Y., Lucas, M., Huang, Z., Superimposed ultrasonic oscillations in compression tests of
aluminium, Ultrasonics, Vol. 44, 2006, pp. 511-515. *( WoS & Scopus)
38. Daud, Y., Lucas, M., Huang, Z., Ultrasonic compression tests on aluminium, Applied
Mechanics and Materials, Vol.3-4, 2005, pp.99-104. *(WoS & Scopus)
Note: * WoS (Web of Science), Scopus
36
CONFERENCES / SYMPOSIUM / PROCEEDING
1. Fazarizul Hashidi Muhamad Pauzi, Mohd Yusof Md Daud, Ahmad Yusri Mohamed, A Review of
Technology Related Services in Creating Value Proposition for LRT Operator, Proceedings of
International Conference on Engineering Business Management (ICEBM2019), August 2019.
2. Noor’Ain Zainal Abidin, Mohamad Syazli Fathi, Mohd Yusof Md Daud and Harmi Izzuan
Baharum, A Game Based Learning for Sustainable Project Management Training: A
Preliminary Survey, 1st International Conference on Sustainable Infrastructure And
Engineering 2017, Kuala Lumpur, Malaysia, 10 Oct 2017.
3. N. A. D. Muhalim, Y. Daud, M. Z. Hassan, S. Sarip, N. A. Raman., S. A. Aziz, Mechanical
properties of quasi-static and ultrasonic compression of copper tube, Advanced Processes and
Systems in Manufacturing An International Conference 2016 (APSIM 2016), Kuala Lumpur, 28-
30 Aug 2016.
4. Mohamad Syazli Fathi, Noor’Ain Zainal Abidin, Mohd Yusof Md Daud and Harmi Izzuan
Baharum, Project Manager’s Competency: Current Context, International Graduate
Conference on Engineering, Science and Humanities (IGCESH 2016), Universiti Teknologi
Malaysia, Johor Bahru, Malaysia, 15-17 August 2016.
5. Mohamad Syazli Fathi, Abdul Karim Mirasa,Shuib Rambat, Dr Siti Uzairiah Tobi,Yusof Daud,
Mohd Zulakhmar Zakiyudin, Nor A’ini Rajab, Context-specific information delivery for building
maintenance of institutions of higher education in malaysia, NAPREC Conference, Malaysia,
28 September 2016.
6. M. Z. Shamsudin, M. Y. M. Daud, Development and Validation of Work Movement Task
Analysis: Part 2, International Conference on Mechanical and Manufacturing Engineering
2015 (ICME 2015), Johor, Malaysia, 19-20 Oct 2015.
7. M. Y. M. Daud, N. Muhalim, Static and ultrasonic compaction of powder metallurgy,
International Conference on Mechanical and Manufacturing Engineering 2015 (ICME 2015),
Johor, Malaysia, 19-20 Oct 2015.
8. M. Z. Shamsudin, M. Y. Daud, Development and Validation of Work Movement Task Analysis:
Part 1 International Conference Innovation Challenges in Multidisciplinary Research &
Practice 2014 (ICMRP 2014), Kuala Lumpur Malaysia, 17-18 Dec 2014.
9. Shamsul Sarip, Mohamad Zaki Hassan, Norazmein Abdul Raman, Sa’ardin Abdul Aziz, Mohd
Yusof Md Daud and Mohd Azman Zainul Abidin, Micro hydro power generation in rural and
37
remote areas: a development of crossflow turbine, National Conference on Royal Belum 2014,
Perak, Malaysia, 09-10 Dec 2014.
10. Mohamad Syazli Fathi, Noor’Ain Zainal Abidin, Mohd Yusof Md Daud and Harmi Izzuan
Baharum, Instilling Good Project Management Culture In Malaysia’s Technical Organizations,
The 13th Annual Research Conference on Advancement in Business, Science and Technology,
(ARC 2014), Istanbul, Turkey, 2014.
11. Y. Daud; N.A. Raman; S.A. Aziz; K.R. Jamaludin, Design of ultrasonic compaction tool for
powder metallurgy, 4th Mechanical and Manufacturing Engineering (ICME 2013), Bangi-
Putrajaya, Malaysia 17-18 Dec 2013.
12. Pang Chee Kong, Yusof Daud, Effective of enterprise of resource planning system in supporting
the lean manufacturing, International of Mechanical & Manufacturing Engineering (ICME
2012), Universiti Tun Hussein Onn Malaysia, 20-21 Nov. 2012.
13. Mohd Yusof Md Daud, Khairur Rijal Jamaludin, Jeyanthi Vengatta Raman, Case study on the
human factor improvement on the quality management in a semiconductor industry,
Advanced Processes and Systems in Manufacturing (APSIM 2011), Kuala Lumpur, Malaysia,
2011.
14. Khairur Rijal Jamaludin, Mohd Shahriman Adenan, Mohd Yusof md Daud, Minimizing
delaminating on medium density fiber board by taguchi method, 14th International
Conference on Advances in Materials and Processing Technologies (AMPT 2011), Istanbul,
Turkey, 2011.
15. Khairur Rijal Jamaludin, Norhamidi Muhamd, Mohd Bizam Abd Rahman, Sufizar Ahmad, Mohd
Halim Irwan Ibrahim, Nor Hafiez Mohd Nor, Mohd Yusof Md Daud, Optimizing the Sintering
Parameter of metal Injection Molding Compact Using Robust Engineering Technique, 14th
International Conference on Advances in Materials and Processing Technologies (AMPT 2011),
Istanbul, Turkey, 2011.
16. Mohd Yusof Md Daud, Margaret Lucas, Khairur Rijal jamaludin, Finite element modeling in
sheet metal forming, 14th International Conference on Advances in Materials and Processing
Technologies (AMPT 2011), Istanbul, Turkey, 2011.
17. Jamaludin, K.R., Muhmad, N., Mohamad Nor, M.N.H., Irwan Ibrahim, M.H., Daud, Y., Design of
experiment on the sintering of SS316L gas atomised MIM compact, 4th Malaysian Powder
Metallurgy & Malaysian Metallurgical Conference 2010 (MMC 2010), Penang, Malaysia, 2010.
38
18. Daud,Y., Lucas, M., Jamaludin, K.R., Anis, S.F., Analysis of surface deformation under static and
ultrasonic compression of aluminium, 4th Malaysian Powder Metallurgy & Malaysian
Metallurgical Conference 2010 (MMC 2010), Penang, Malaysia, 2010.
19. Jamaludin, K. R., Rahman, M. N. A., Ahmad, S., Ibrahim., M. H. I., Nor, N. H. M., Harun, M. R.,
Daud, Y., Multiple performance optimization for the best metal injection molding (MIM) green
compact, International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala
Lumpur, Malaysia, 2010.
20. Daud, Y., Lucas, M., Jamaludin, K. R., Verification of Interface Friction of Radial Ultrasonic
Compression using FE Simulation, International Conference on Plant Equipment and Reliability
(ICPER 2010), Kuala Lumpur, Malaysia, 2010.
21. Ali, R., Hassan, N. A., Md Daud, M.Y., Information Literacy of Engineering Students: A Case
Study, IEEE International Congress on Engineering Education (ICEED 2009), Kuala Lumpur,
Malaysia, 2009.
22. Ali, R., Hassan, N. A., Daud, Y., Information and Communications Technology Skills in
Engineering Education, International Conference on Engineering and Education in the 21st
Century, Kuching, Sarawak, Malaysia, March 2009.
23. Daud, Y., Finite element modelling of radial ultrasonic compression of aluminium, Malaysian
Science and Technology Congress 2008, Kuala Lumpur, December 2008.
24. Daud, Y., Lucas, M., Longitudinal and radial ultrasonic compression on aluminium under
different lubrication conditions, Word Engineering Congress (WEC) 2007, Penang, Malaysia, 5-
9 August 2007.
25. Daud, Y., Lucas, M., Finite element modelling of ultrasonic extrusion, International Congresses
on Ultrasonics Merged with Ultrasonics International, Vienna, Austria, April 2007.
26. Lucas, M., Daud, Y., Huang, Z., Ultrasonic compression tests on aluminium, British Society for
Strain Measurement International Conference on Advances in Experimental Mechanics,
Southampton, UK, September 2005.
27. Daud, Y., Lucas, M., Huang, Z., Superimposed ultrasonic oscillations in compression tests of
aluminium, World Congress in Ultrasonic Merged with Ultrasonics International, Beijing,
China, August-September 2005.
28. Lucas, M., Daud, Y., Ultrasonic upsetting tests on aluminium, Ultrasonics Industries
Association Symposium, Las Vegas, USA, March 2005.
39