CURRICULUM VITAE OF DR. ANIL KUMAR SAXENA

PERSONAL INFORMATION

NAME : Dr. A. K. SAXENA

DATE OF BIRTH : September 25, 1951

MARITAL STATUS : Married

ADDRESS FOR : B – 9 / 6258, Vasant KunjCOMMUNICATION New Delhi-110070.

INDIA

CONTACT TELEPHONE : Residence – (011) 2613 5441; 4178 7124Mobile: + 91 98 102 18097E-mail: anil6258@gmail.com

AREAS OF SPECIALIZATION : i. Waste Minimization & Management

ii. Green Productivityiii. Resources Optimization & Managementiv. Energy Efficiency & GHG Emissions

Reductionv. Policy Planning on Natural Resources

Management

PRESENT POSITION : ENVIRONMENTAL CONSULTANT: Assessor for EIA Consultancy Organizations for

QCI-NABET: Visiting Professor to TERI University &

Birla Institute of Management Technology

PROFESSIONAL EDUCATION

April to July 1992 : Post graduate Diploma in “Water Analysis &Quality” from Loughbrough University of Technology, Water Engineering Development Centre, Loughbrough, U.K.

1975 – 1978 : Doctorate Degree in Zoology with specialization in Mammalian Toxicity from University of Rajasthan, Jaipur, Rajasthan, India

1973 – 1975 : First Class Post Graduate Degree in Zoology fromVikram University, Ujjain, M.P., India

ADVANCED TRAINING

February to November 1986 : Advanced Training on “Solid & Hazardous Waste Management” from Germany

GENERAL EXPERIENCE

i) Expert Committee Panel: - Member of various Committees constituted by the Members Ministry of Environment and Forests, Government

of India; Central Pollution Control Board and State Governments on environment related policy matters, - Ex-member of High Powered Committee on

Hazardous Waste Management constituted by Hon’ble Supreme Court Headed by Prof. M.G.K. Menon (1997 to 2001

- Ex-member EAC on New Construction Projects of Ministry of Environment & Forests, Govt. of India

- Expert member on ENVIS for Min. of Env. & Forests, Govt. of India

ii) Resource Person : - Training program, Workshops organised by different Government agencies.-Training programs of Asian Productivity

Organization (APO), Tokyo, Japan on Green Productivity, Greenhouse Gas Emissions, Biomedical Waste Management, Hazardous waste Management, etc.

- Conducted one week E-learning training program on Biomedical Waste Management for APO member Countries in 2007 from TERI centre.

iii) Membership : - Individual Member of International Solid Waste Association (ISWA); - Life Membership of National Solid Waste

Association (NSWA)- Life Membership of World Academy of

Productivity Sciences (WAPS)- Member Federation Water Pollution

Control, USA

COUNTRIES VISITED :

- Visited Asian Countries like Sri Lanka, Mangolia, Singapore, Malaysia, Thialand, Indinesia, Nepal & Bangladesh as a Resource Person on Green Productivity for Asian Productivity Organization (APO), Tokyo, Japan.

- Visited ROC, Taiwan during 2nd to 8th

December, 2008 as Resource Person on “Green House Gas Reduction” for Asian Productivity Organization, Tokyo, Japan.

- UNIDO engaged as an Expert on Cleaner Production for Vietnam in Dec. 2002 for Ho Chi Minh City to establish Cleaner Production Circles (CPC) and also expert on Environmentally Sound Technologies (ESTs).

- GTZ, Germany engaged Cleaner Production & Energy Efficiency expert to evaluate Multi donner project on SME Clusters in India during Sept. – Oct., 2009.

- Visited Bangladesh during 30th October to 5th

November, 2011 as APO resource person for “Implementation of Effective Environmental Management Protocols in Pharmaceutical Sector of Bangladesh”.

iii) Publications : More than 30 papers published in various national and international journals.

SPECIAL ACHIEVEMENTS

i) Assisted Ministry of Environment & Forests, Govt. of India in formulation of “Hazardous Wastes (Management & Handling) Rules, 1989”

ii) Developed Guidelines on “Hazardous Waste Management” for the implementation of HWM Rules in 1991 for the Ministry of Environment & Forests, Govt. of India

iii) Designed and operationalized Centralized Secured Landfill Facility (CSLF) first time in India at Ankleshwer for the disposal of Industrial Hazardous Wastes of Bharuch District in Gujarat in 1997.

iv) Developed EIA procedure for the “Identification of Sites for the development of TSDF in India”, published by the Central Pollution Control Board, 2001 - 02.

v) Developed “Comprehensive Industry Document on Spent Pot Lining Waste in Aluminum Smelters” for the Central Pollution Control Board in 1992 – 93.

vi) Article on “Environmentally Sound Hazardous Waste Management” for UNESCO’S Encyclopedia on “Life Support Systems”.vi) Implemented a project on “Demonstration of Waste Minimization in Basic

Chrome Sulphate (BCS) manufacturing Unit at Kanpur” in 2007 – 08 sponsored by the Ministry of Environment & Forest (MoEF), Govt. of India.

vii) Developed Manual on “How to Estimate Greenhouse Gas Emissions and technologies to Reduce GHG Emissions” for APO, Tokyo, Japan, 2010.

EMPLOYMENT DETAILS

a) RAMKY ENVIRO ENGINEERS: LTD., NEW DELHI NOV, 2006 – October, 2011

Position Held : Vice President

Responsibilities :*Responsible for top line & bottom line of the North Zone of REEL, Delhi *Planning, Management & Monitoring of activities of Environment related turn-key projects*Establish cost center of REEL Delhi office*Monitor & Control revenue & expenditure of North Zone office of Ramky and develop profit center.*Plan and monitor activities to drive office toward profit center.*Identify new areas and avenues of business in the field of Environment Conservation and Protection.*Negotiation, Planning & Linkages with National & International agencies*Negotiations, Planning & Monitoring activities of projects in the NorthernZone of India w.r.t. Waste Management.

*Negotiations, Planning & Monitoring activities of projects in Integrated Environment Management in India – a

concept from Planning to Design, Execution, Commissioning and post commissioning O & M of Pollution Control Systems..

IMPORTANT PROJECTS

*Design & Development of SLF for Hazardous Waste of IOCL, Panipat; Hero Honda at Haridwar &Dharuhera, 2007 - 10.*Stabilization, Transportation & Disposal Of SEP sludge from M/s. Ranbaxy, Tonsa Punjab to TSDF site at Nimbua, 2009.*Capping of SEP at M/s. DSM Anti Fugitive Ltd., Toansa, Punjab, 2009.*Assessment of Pollution and Design of Waste Minimization, Resource Recovery and Pollution Control Systems for M/s. IGL, Kasahipur, Uttrakhand, 2008 - 09.*Demonstration of Waste Minimization in Basic Chrome Sulphate (BCS) manufacturing unit at Kanpur” project for Ministry of Environment & Forests, Govt. of India, 2009 - 10.*Pollution Load assessment & identification of Waste Minimization measures in Textile Industries of Pali, Rajasthan”, 2009 - 10.*Pollution Load assessment & identification of Waste Minimization measures in Metal Finishing & Acid Pickling Industries of Jodhpur, Rajasthan”, 2009 - 10.*Preparation of DPR for Establishment of Integrated MSW Facility at Narela – Bavana Site of MCD, 2010.*Development of DPR on River Front Development & Park Development in Agra” for Agra Development Authority, 2009.*Pre- feasibility of Shifting of Polluting Industries from Non-conforming areas of Agra, 2008 - 09.*Development of On-line Water Quality Monitoring System for IPH, Govt. of Himanchal Pradesh, 2009.*Preparation of GIS maps of unauthorized colonies of Delhi” for Govt. of NCR Delhi, 2009. *Development of Monitoring & Analysis protocol for Water Quality for Govt. of Himachal Pradesh, 2009.*Evaluation of Industrial Infrastructure Up-gradation Scheme (IIUS) for recommendation to 11th Plan for DIPP, Min. of Commerce & Industry, Govt. of India,

2009.*Evaluation of SITP for Min. of Textile, Govt. of India, 2010. *Evaluation of Multi-doner project on SME Clustersfor GTZ, Germany as an Expert on Cleaner Production & Energy Efficiency”, 2009. *Benchmarking Rural Water Supply Schemes in Rajasthan” – an EU funded PHED, Rajasthan project,2010.

b) NATIONAL PRODUCTIVITY: SINCE APRIL,1983 to October, 2006COUNCIL OF INDIA

Position : Sr. Director & Head (Environment) Since July, 1995 to October, 2006

Responsibilities :*Planning, Management & Monitoring of activities of Environment Division of NPC

*Training & Capacity Building within NPC & Country

*Project counterpart for Indo-German Technical Cooperation Project on “Industrial Pollution Control” from 1995 to 2002.

*Planning & Execution of Indo-German Technical Cooperation Project on “Industrial Pollution Control” from 1995 to 2002.

*Negotiation, Planning & Linkages with National & International agencies

*Project Management Consultant (PMC) for MoEF on “World Bank assisted project on Pollution Control implemented at various PCBs.

*Project Management Consultant (PMC) for MoEF on “Feasibility Studies for Remediation of Hazardous Waste Dump Site at Bichri, Udaipur, Rajasthan”.

*Negotiations, Planning & Monitoring activities in the field of Solid & Hazardous Wastes, Waste

Minimisation, Cleaner Production & GreenProductivity.

*Planning & Organisation of Training Programmes and Workshops.

c) COUNCIL OF SCIENTIFIC & : MARCH 1982 to MARCH 1983INDUSTRIAL RESEARCH

Position : Scientist B

Responsibilities :*Coordination between Government & Industries for the transfer of Pollution Control Technologies

*Provide advisory services to the industries in the field of Pollution Control

*Compile profile of Waste Minimisation, recycle & reuse technologies and transfer to the industries

*To identify specific pollution problems and refer to R & D institutions.

d) ZOOLOGY DEPARTMENT: 1979 to MARCH 1982UNIVERSITY RAJASTHAN, JAIPUR

Position : Research Associated

Responsibilities : *Conduct applied Research in the field of Pesticide Toxicity*Guide junior research fellows*Act as a faculty in the University

PROFESSIONAL EXPERIENCE

CONSULTANCY CUM :28 years in the field of Solid & Hazardous Waste TRAINING Management, Waste Minimization, Cleaner

Production, Environment Management System & Green Productivity.

Project Planning & Management : i) More than 8 years in Planning &Management of Indo-German Technical Cooperation Project on Industrial Pollution Control

ii) About 4 years in Planning & Managementof World Bank assisted Ministry of Environment and forests, Government of India Projects on Pollution Prevention & Control.

iii) About two years in the management of Hazardous Waste Remediation Project in India on behalf of the Ministry of Environment & Forests, Government of India.

Project Execution : I) EIAs for site selection for the disposal of Industrial Hazardous Wastes in the states of Gujarat, Rajasthan, Orisa, West Bengal, Uttar Pradesh, Tamil Nadu, Maharashtra, Delhi, Haryana.

ii) Design of Mono & Centralaised Secured Landfill facilities for more than 15 clients for the disposal of Hazardous Wastes in India

iii) Environment Impact Assessment of Municipal Waste & up-gradation of old dump sites at Kanpur, UP

iv) Design for up-gradation of old dump site in Moradabad, UP

v) Assessment & up-gradation of Municipal Waste dump sites at Vadodara, Gujarat

vi) Remediation of five hazardous wastes dump sites in Gujarat at Ahmedabad, Vadodara, Rajkot

vii) Project leader for Demonstration of Green Productivity in Dyes & Dye Intermediate and Tannery in India sponsored by the Asian Productivity Organization.

viii) APO Expert on GPPM for Singapore, Mangolia, Philippines, Malaysia & Indonesia, 1998-2002.

ix) APO National Expert on Waste Minimization Survey in India, 1998.

x) UNIDO’s National Expert to prepare case studies on Environment Management system in SMEs, 1996.

xi) Project Leader for “Preparation of Comprehensive Industry Document & Water Consumption Standards in Pulp & Paper Industries” for CPCB in 2005-06.

xii) “Demonstration of Waste Minimization in Agro Residue based Pulp & Paper, Textile Industries & Pesticide Formulation Industries” for UNIDO in 1992-93.

xiii) “Development of Environmental Benchmarks & Best Practices through Green Productivity in Edible Oil Sector”, APO sponsored project, 2001-02.

xiv) “Demonstration of Waste Minimization in Electroplating Industries of Delhi”, project sponsored by WHO in 1988.

xv) Project leader for Demonstration of Green Productivity in Edible Oil Sector in India 2001-2002, sponsored by APO, Japan

xvi) UNIDO International Expert on Cleaner Production Circle to train CP Facilitators & Establish CP Circles in Ho Chi Minh City, Vietnam, December, 2002.

xvii) Chief Expert on Web based International Training Workshop on “Green Productivity & Environment Management System” 21st – 25th August and 4th – 8th Sept., 2006 organised by Asian Productivity Organization, Tokyo, Japan

xviii) Chief Expert on e-learning program on “Green Productivity & Medical Waste Management” , 4th – 10th December, 2006 organized by Asian Productivity Organization, Tokyo, Japan

xix) APO Expert to Bangladesh for Capacity Building in “Implementation of Environmental Management Protocols in Pharmaceutical Sector” from 30th October to 5th November, 2011.

Declaration: This is to certify that the information provided above is correct to the best of my knowledge.

(DR. A.K. SAXENA)

ANNEXURE - I

LIST OF PUBLICATIONS

1. “Problems of Hazardous Waste Management in Textile Industries” Paper present at the National Seminar on Problems & Prospects of Pollution Control in Textile Industries, organised by NPC, 1985.

2. Toxic Waste Management in India, Published in Pollution Control Handbook 1986.

3. Waste Minimisation in the Electroplating Industries, Proceedings of Seminar on Pollution Problems of Metal Finishing Industries, 1989.

4. Course Material on “Hazardous Waste Management” for Indira Gandhi Open University, New Delhi, 1990.

5. “Guidelines for Hazardous Waste Storage, Handling Transportation, Treatment & Disposal” paper presented in the Workshop organised by the Ministry of Environment & Forests, 28-30, August, 1991.

6. Case Studies on Pollution Prevention in Small Scale Industries paper presented in the Seminar organised by Rajasthan State Productivity Council, May, 1992.

7. Hazardous Wastes : Identification, Packaging, Labelling & Tracking. Productivity, April-June, 1993.

8. Data Bank on Hazardous Waste Generation from Aluminium Smelters. Productivity News, 1993.

9. Hazardous Wastes Management : Systems & Regulations in India (Paper accepted in the International Symposium on Hazardous Waste Management in Developing Countries” organised by Turkish National Committee on Solid Waste & ISWA at Istanbul, Turkey, June, 1993).

10. “Safe Disposal of Hazardous Wastes”, Lecture Note for Training Programme organised by ITRC, Lucknow, 5-25, June, 1993.

11. Pollution Prevention in H-Acid Manufacturing Unit. A Case, Paper published in UNEP’S Journal “Industry & Environment”, January, 1995.

12. Waste Minimisation in Dyes & Dye Intermediate Industries. Paper presented in Workshop on Waste Audit at Ahmedabad, November, 1994.

13. “EIA Studies for the selection of Sites for developing Hazardous Waste Disposal Facility – A Case Study” published with journal of Solid Waste Technology & Management, February, 1996.

14. A paper titled “Basic Design Concepts of Secured Landfill Facility” was jointly written for presentation in International Conference at Italy in 1996.

15. A paper titled “Feasibility of Indigenously Developed Asphalt Concrete Based Liner System for Disposal of Hazardous Wastes in India” was jointly written for presentation in International Conference at Chennai in January, 2000.

16. An Approach Paper on “Environmental Impact Assessment Study for Site Selection for Common Hazardous Waste Management Facility” was jointly written for the High Power Committee (constituted by Hon’ble Supreme Court of India) report on Hazardous Waste Management.

17. A paper on “Demonstration of Waste Minimisation in Textile Dyes & Dye Intermediate – Vinyl Sulfone” presented at APO World Conference on Green Productivity organised at Manila, Philippines in December, 1996.

18. A paper on Waste Minimisation in Dyes & Dye Intermediate Industry (J-Acid) presented at International Conference at Taipei, Taiwan in 1996.

19. “Green Productivity Through ISO 14001” presented in the First Conference on Green Productivity at Manila, Philippines (1996).

20. “Development of Hazardous Waste Management Facility – Pros & Cons” published in “Environmental Pollution Control Journal” in (1997).

21. “Feasibility Studies for Development of Asphaltic Concrete Liner System for Disposal of Hazardous Wastes” presented at Conference on Hazardous Waste Management at Anna University, Chennai (1999)

22. “Environment Impact Assessment Studies for Selection of Site for Development of Common Waste Management Facility”

23. “Development of Secured Landfill Facility for Oily waste – A Case Study” presented in the National Conference organized by Engineers India Limited, New Delhi (1998)

24. “Green Productivity – A Tool to Achieve Sustainable Development in SMES” presented in International Conference organized by TAFCON (2002)

25. “Green Productivity & Corporate Governance” presented in International Conference organized by World Environment Foundation (2002)

26. “Adequacy of Waste Disposal Facilities in India” presented in the workshop organized by Central Pollution Control Board at Chandigarh (1999)

27. “Sustainable Growth Through Green Productivity – A case study of Edible Oil Industry”, 2003 presented in the National Conference organized by Vidarbha Productivity Council at Mumbai (June 2003)

28. “Upgradation of Existing Municipal Dump Sites, EIA Studies for selection of new site and design of landfill facility for municipal solid wastes” presented at AIILSG Conference in the year 2003.

29. “Municipal Solid Waste Management – Environmental Assessment of Existing Municipal Dump Sites – A Case study” presented at International Conference at Anna University, Chennai (2003).

30. An article in association with Mr. Yogesh Kumar Gupta, Dy. Director, on “Environmentally Sound Management of Hazardous Waste” Published in UNESCO’S Encyclopedia on Life Support System EOLSS, 2004.

31. Presented paper on “Climate Change: Present & Future” during International Workshop on Environment Management, Palampur, Himachal Pradesh, June, 2006.

32. “Waste Management: Yesterday, Today & Tomorrow” presented in Workshop on Waste Management organized by HRD Foundation, Delhi October, 2008.

(DR. A.K. SAXENA)