CURRICULUM VITAE - University of Jordaneacademic.ju.edu.jo/altahat/My CV/CV Academic site.pdf · of Tabuk in Saudi Arabia during the academic year 2015/2016, and currently he is working

Page 1 of 19 Last modified: Friday, June 16, 2017

CURRICULUM VITAE

1. Family name: AL-Tahat

2. First name: Mohammad, Dheif - Alla Al - Ahmad

3. Date of birth: 20/11/1968

4. Nationality: Jordanian

5. Contact Information Official home page: http://eacademic.ju.edu.jo/altahat/default.aspx

Mobile: 00962 777 635 219 Jordan

What’s up: 00962 777 635 219

Skype ID: mohammaddaltahat

E-mail: [email protected],

[email protected]

6. Civil status: Married,

7. Family members: 8

8. Brief biographical sketch:

Mohammad D. AL-Tahat is a university full professor of Industrial Engineering (IE) with

the University of Jordan, where he teaches and conducts several research works in the

area of industrial and manufacturing engineering. He received the Bachelor’s degree

(B.Sc.) at 1990 in production and metallurgy engineering from the University of

Technology in Iraq, the Master degree (M.Sc.) at 1993 in IE from the University of Jordan,

and the Philosophy degree (Ph.D.) at 2003 in IE from the University of Bologna/ Italy. He

worked with the Jordanian industry for more than 6 years as an industrial and

manufacturing engineer. His articles have appeared in many international journals such

as; American Journal of Operations Research, Int. J. of Manufacturing Technology

Management, Int. J. of Risk Management, Int. J. of lean enterprise research, Int. J. of

Integrated Supply Management, Int. J. of Intelligent Manufacturing, among others. He has

taught many courses in the field of industrial engineering and manufacturing for both

undergraduate and graduate programs such as; Operations research, Production

planning and management, Logistics and Supply Chain management, Manufacturing

Processes, Quality control, Engineering Statistics and others. Prof. AL-Tahat supervised

more than 25 master dissertations, and more than 50 final year project. He worked - at

the faculty of engineering and technology in the University of Jordan- as; the Dean

assistant for student's affair during the academic year 2006/2007, chairman of the

industrial engineering department for the academic years 2007/2008 and 2008/2009, and

2014/2015. He worked as a visiting associate professor of industrial engineering with the

University of Science and Technology (JUST) during a sabbatical leave for the academic

year 2009/2010, worked a visiting professor of industrial engineering with the University

http://eacademic.ju.edu.jo/altahat/default.aspx

mailto:[email protected]



of Tabuk in Saudi Arabia during the academic year 2015/2016, and currently he is

working as a visiting professor for industrial engineering with Yarmouk University/ Jordan,

during a sabbatical leave for the academic year 2016/20170.

9. Education and Qualifications:

Institution The University of Jordan, Industrial Engineering Department

Date November 19, 2012

Academic Title (Degree)

Title: Professor of Industrial Engineering

Major Industrial and manufacturing engineering


Date April.9, 2008

Academic Title (Degree)

Title: Associate Professor of Industrial Engineering

Major Industrial and manufacturing engineering

Institution University of Bologna – Italy, DIEM department, Faculty of engineering.

Date 2000 - February 18, 2003

Degree Ph.D. in Design and Methods of Industrial Engineering

Dissertation Title Methods and Approaches in Design of Kanban-Based Lean Production System


Date 1990 - 1993

Degree M.Sc. in Industrial Engineering

Thesis Title Computer Aided Process-Planning (CAPP).

Institution University of Technology, Baghdad. Republic of Iraq

Date 1986 - 1990

Degree B.Sc. in Production and Metallurgy Engineering

Major Production Engineering

Graduation Project Friction welding

10. Language skills (5 - excellent; 1 - basic):

Language Reading Speaking Writing

English 5 5 5

Arabic 5 5 5

Italian 3 3 3

11. Membership of professional bodies and committees:

- Member of Advisory Committee for the Seventh International Conference on Industrial Engineering and Operations Management in Rabat, Morocco, April 11-13, 2017. Organized by IEOM Society. http://ieomsociety.org/ieom2017/

- Editorial Board Member of International Distance Education Conference, IDEC 2015. http://www.id-ec.net/editorial_board.

- Editorial Board Member of (MyJurnal) Malaysian Journal Management System. http://www.myjurnal.my/public/browse-journal-view.php?id=327

http://ieomsociety.org/ieom2017/

http://www.id-ec.net/editorial_board

http://www.myjurnal.my/public/browse-journal-view.php?id=327


- Editorial Board Member of Jordan Journal of Mechanical and Industrial Engineering, (JJMIE). The Jordanian Ministry of Higher Education and Scientific Research in corporation with the Hashemite University, Jordan. http://jjmie.hu.edu.jo/

- Member of the University Council - by election - for the academic year

2013/2014 at the University of Jordan. - Member of the faculty Council - by election - for the academic year 2012/2013

and 2011/2012, at the faculty of engineering and technology, the University of Jordan.

- Reviewer for conferences and journals of WSEAS (World Scientific and

Engineering Academy and Society) (http://www.wseas.org)

- Editorial Board Member of the International Journal of Engineering and Industries, (IJEI). Advanced Institute of Convergence IT (AICIT), Korea. http://www.aicit.org/ijei/home/editors.html

- Editorial Board Member of the International Journal of Global Engineers &

Technologists Review, (GET view). Malaysian Citation Centre, Ministry of Education, Malaysia. http://www.getview.org/editorial_board.html

- Editorial Board Member of the International Journal of Science, Technology

and Society, (IJSTS). Science Publishing Group, USA. http://www.sciencepublishinggroup.com/journal/editorialboard.aspx?journalid=183

- Editorial Board Member of the International Journal of Advanced Science and

Engineering Technology (IJASET), ISSN: 2225 – 9686. Greater Amman Municipality. http://www.ijaset.com

- Editorial Board Member of International Journal of Adaptive Infrastructure.

ISSN: 1740-2107. Inderscience publishers. http://www.inderscience.com/jhome.php?jcode=IJAIS.

- Editorial Board Member of Journal of Applied Sciences. Official publication of

the Asian Network for Scientific Information

- Member of National Organizing Committee for International Conference of Nanostructure Advances Materials, organized by University of Illinois, University of Jordan, Higher Council of Science and technology, and King Saud University, 10 -13 November 2008, Amman, Jordan.

- Member of Organizing and Scientific Committee for International Global

Conference on Renewable Energy Approaches of Desert Regions GCREADER 2008, April 2009, Amman, Jordan.

- Member of Jordan Engineering Association - Founder and Member of Jordan Foundry men Association - Active member of Leading Cultural Forum LCF - Active member of Jordan Society for Ethics JSE

12. Present position: Professor of Industrial and Manufacturing Engineering/

The University of Jordan

13. Years within the firm: 14 Years

http://jjmie.hu.edu.jo/

http://www.wseas.org/

http://www.aicit.org/ijei/home/editors.html

http://www.getview.org/editorial_board.html

http://www.sciencepublishinggroup.com/journal/editorialboard.aspx?journalid=183

http://www.sciencepublishinggroup.com/journal/editorialboard.aspx?journalid=183

http://www.ijaset.com/

http://www.inderscience.com/jhome.php?jcode=IJAIS


14. Major qualifications Industrial Management and Manufacturing Technology

15. Overall Experiences

Country

Time Span

Period Description

From To

Jordan

18/9/2015 Now Visiting Professor for the Industrial Engineering department at Yarmouk University/ Jordan

30/8/2015 7/1/2016

Visiting Professor for the Industrial Engineering department at the University of Tabuk in Saudi Arabia

1 year 7/9/2014 6/9/2015 Chairman of Industrial Engineering Department/ University of Jordan

19/11/2012 Now Professor/ University of Jordan/ industrial engineering department

3 Months 10/6/2012 9/9/2012 Acting chairman of the industrial engineering department/ University of Jordan

4.0 Years & 7 Months

9/4/2008 18/11/2012 Associate Professor/ University of Jordan/ industrial engineering department

1 year 13/9/2009 13/9/2010

"Visiting Associate Professor" for the Industrial Engineering department at the Jordan University of Science and Technology "(JUST) (Sabbatical leave)

2 Years 10/9/2007 12/9/2009 Chairman of Industrial Engineering Department/ University of Jordan

1 Year 10/9/2006 10/9/ 2007 Dean Assistant for student's affair/ Faculty of Engineering/ University of Jordan

3 Months 24/7/2006 9/9/2006 Acting chairman of the industrial engineering department/ University of Jordan

5 Years 1/3/2003 9/4/2008 Assistant Professor/ University of Jordan/ industrial engineering department

- Sep. 2005 Sep. 2007

Part time Lecturer at the department of Computer Information System (CIS) at the Jordan University of Science and Technology (JUST)

Italy 3 Years 8/2/2000 28/2/2003 Ph.D. researcher

Jordan 6 Months 7/8/1999 7/2/2000

Planning & Development Engineer at the Jordan University of Science &Technology, Operating and Maintenance Department

Jordan 4 Months 11/4/1999 23/8/1999

Head of Sales and Marketing Department in the commercial department at Arab Engineering Industries Company (AEICO)

Jordan 1 Year

& 3 Months

17/12/1997 10/4/1999

Sales and Marketing Engineer in the commercial department at Arab Engineering Industries Company (AEICO)

Jordan 1 Year

& 10 Months

22/4/1995 16/12/1997

Planning Engineer and Casting Technologist at Arab Engineering Industries Company (AEICO) Planning and Information department

Egypt 5 Months 1/12/1994 21/4/1995

Training on Foundry Management and Technology of Steel and Iron Casting, at Central Metallurgical Research and Development Institute – (CMRDI) Cairo / Republic of Egypt.

Jordan 1 Month 1/11/1994 30/11/1994 Industrial Engineer /Jordanian Investment Corporation

Jordan 1 Year

& 5 Months

14/6/1993 31/10/1994 Working as an Industrial Engineer in different Jordanian factories

Jordan 2 Years

& 8 Months

Sep. 1990 13/6/1993 Teaching assistant at the industrial engineering department as a Master student


A total of more than 26 Years of Variant Working Experience

16. Detailed teaching experience: Period-Date 18/9/2016- 17/9/2017 (Sabbatical leave)

Location Jordan

Company Yarmouk University

Position Professor

Description Academic teaching as recorded below, and research work in the field of industrial engineering as listed in the publication section of this CV.

Taught Courses

Course # Course Name Department University

IE 568 Product design

Industrial Engineering Department Yarmouk University

IE 566 Production Planning and Control

IE 594 Lean Production Systems

IE 367 Laboratory of Manufacturing Processes

IE 366 Materials and manufacturing processes

IE 548 Supply Chain Management

Supervising Many graduation Projects

Period-Date 30/8/2015- 7/1/2016

Location Kingdom of Saudi Arabia

Company University of Tabuk (UT)

Position Professor


Taught Courses


INEN 320 Engineering Statistics

Industrial Engineering Department University of Tabuk (UT)

INEN 221 Operations Research

INEN 305 Work Study

Period-Date 1/3/2003 - Now

Location Jordan

Company The University of Jordan

Position Professor


Taught Courses


0906701 Advanced Operation Research (Master)

Industrial Engineering Department The University of

Jordan

0906703 Advanced Production Planning and Control (Master)

0906411 Manufacturing Processes-2/metal cutting

Industrial Quality Control

0906525 Logistics and Supply Chain Management

0906701 Advanced Operation Research (Master)

0906710 Advanced Engineering Economy (Master)

0906501 Special topics in Manufacturing

0906421 Production Planning and control

0906552 Operation Research -2

0906412 Laboratory of Manufacturing Processes

0906703 Advanced Production Planning and Control (Master)

0906721 Design and Analysis of Production Systems

0906311 Metal Forming

0906411 Metal cutting

Supervising Many graduation Projects

Supervising Many Master thesis


Period-Date 13/9/2009- 13/9/2010 (Sabbatical leave)

Location Jordan

Company Jordan University of Science and Technology (JUST)

Position Associate Professor


Taught Courses


IE 747 Lean and Agile production systems Industrial Engineering Department Master Program

Jordan university for Science and Technology

IE 342 Operations Research-1

Industrial Engineering Department

IE 442 Operations Research -2

IE 561 Tools Design

IE 541 Production Planning and control

IE 441 Quality Control

Period-Date Variant

Location Jordan

Company Part time teaching for different institutes and universities

Position Variant


Taught Courses


IE 747 Lean and Agile production systems Industrial Engineering Department Master Program

Jordan university for Science and Technology

IE 342 Operations Research-1

Industrial Engineering Department


IE 561 Tools Design

IE 541 Production Planning and control

IE 441 Quality Control

IE 561 Tools Design


IE 440 Applied Engineering Statistics

IE 346 Manufacturing Processes 1

IE 466 Manufacturing processes

CIS 383 Operations Research Computer Information System (CIS) Department

17. Detailed professional records: Period-Date September 2014- September 2015

Location Jordan


Position - Faculty Member, Rank: Full Professor - Chairman of the industrial engineering department

Description Managing and directing the industrial engineering department. Academic teaching as recorded below, and research work in the field of industrial engineering as listed in the publication section of this CV.

Period-Date September 2008- September 2009

Location Jordan


Position - Faculty Member, Rank: Associate Professor - Chairman of the industrial engineering department

Description Managing and directing the industrial engineering department. Academic


teaching as recorded below, and research work in the field of industrial engineering as listed in the publication section of this CV.


Location Jordan


Position - Faculty Member, Rank: Assistant Professor - Chairman of the industrial engineering department

Description Managing and directing the industrial engineering department. Academic teaching as recorded below, and research work in the field of industrial engineering as listed in the publication section of this CV.


Location Jordan


Position - Faculty Member, Rank: Assistant Professor

- Dean Assistant for student's affair/ Faculty of Engineering and Technology

Description Managing, directing, coordinating and following-up academic and other students' needs within the faculty of engineering and technology. Academic teaching as recorded below, and research work in the field of industrial engineering as listed in the publication section of this CV.

Period-Date 24/7/2006- 9/9/2006 (3 Months)

Location Jordan


Position Faculty Member Rank: Assistant Professor Acting chairman of the industrial engineering department

Description Managing and directing the industrial engineering department in addition to the academic teaching and research work in the field of industrial engineering

Period-Date 8/2/2000 – 28/2/2003 (3 Years)

Location Italy, DIEM department at faculty of engineering.

Company University of Bologna

Position PhD Student and researcher

Description Researcher in the field of design and method of industrial engineering Dissertation Title: Methods and Approaches in Design of Kanban-Based Lean Production System

Period-Date 7/8/1999-7/2/2000 (6 Months)

Location Irbid, Jordan

Company Jordan University of Science and Technology (JUST)

Position Planning & Development Engineer in the department of operating and maintenance

Description - Planning and development engineer

Period-Date 11/4/1999-23/8/1999 (4 Months)

Location Jordan

Company Arab Engineering Industries Company (AEICO) - Irbid Steel Foundry - at AL - Hassan Industrial Estate

Position Sales & Marketing department head in the commercial section

Description - Marketing and feasibility studies - Strategic marketing & planning - Competitiveness, marketing, and customers classifications - Marketing information system - Promotions. Industrial and international fairs


- Analysis of products performance and customer’s claims.

Period-Date 17/12/1997-10/4/1999 (1 Year and 3 Months)

Location Jordan

Company Arab Engineering Industries Company (AEICO) - Irbid Steel Foundry - at AL - Hassan Industrial Estate

Position Sales & Marketing Engineer

Description - Marketing and feasibility studies - Strategic marketing & planning - Competitiveness, marketing, and customers classifications - Marketing information system - Promotions. Industrial and international fairs - Analysis of products performance and customer’s claims.

Period-Date 22/4/1995 – 16/12/1997

Location Jordan

Company Arab Engineering Industries Company. (AEICO)

Position Steel Casting technologist

Description - Measuring and drawing of castings (CMM. CAD). - Casting design (Properties, shape, material, heat treatment, and melting, molding, shake out, finishing)(AFS software) - Gating systems design and casting defects. - Risers design - Treatment of defects attributable to casting design - Patterns design. Prototyping. Castings performance

- Planning & Information Management (DEWTEC system)

- Computers in designing and planning of foundries

Period-Date 1/12/1994 - 21/4/1995 (5 Months)

Location Egypt

Company Central Metallurgical Research and Development Institute - (CMRDI)

Position Trainer

Description Training on Foundry Management and Technology of Steel and Iron Casting

Period-Date 14/6/1993 - 30/11/1994 (1 Year and 6 Months)

Location Jordan

Company Different Jordanian factories and corporation

Position - Industrial Engineer

Period-Date September 1991 – 13/6/1993 (2 Years and 8 Months)

Location Jordan

Company University of Jordan

Position - Master Student - Teaching Assistant in the laboratories of Industrial Engineering

Department. University of Jordan.

Description - Properties of engineering materials lab - Metrology lab. Prop. Of materials lab - Operation Research OR - Engineering economics - Workshop technology - Mechanical design.


18. List of publications:

1. Mohammad D. AL-Tahat, and Ala’a M. AL-Habashneh (2017). Awareness of industries toward implementing Concurrent Engineering (CE) culture Case Study: Jordanian Industries. Proceedings of the International Conference on Industrial Engineering and Operations Management Rabat, Morocco, April 11-13, 2017. (The Best track paper Award).

2. Mohammad D. AL-Tahat, Mohammad Al Janaideh, Sa'ed A. Musmar and Mowafaq E. Jabri, (2016), Assessment of Energy Consumption Effect on the World Passenger Airline Network. The Journal of Nature Science and Sustainable Technology (JNSST), Vol. 10, Issue 3. , 2016 Q3.ISSN: 1933-0324.

3. Omar Aljanaideh, Mohammad D. AL-Tahat, Mohammad Al Janaideh, (2016), Rate-bias-dependent hysteresis modeling of a magnetostrictive transducer. Microsystem Technologies. ISSN: 0946-7076 (Print) 1432-1858. April 2016, Volume 22, Issue 4, pp 883-892. (1st online: 13 May 2015).

4. Abbas Al-Refaie, Ruba Najdawi, Mohammad D. AL-Tahat, Nour Bata (2015), Window Analysis and Malmquist Index for Assessing Efficiency in a Pharmaceutical Industry, Proceedings of the World Congress on Engineering WCE 2015 Vol I, July 1 - 3, 2015, London, U.K.

5. Abbas Al-Refaie, Mohammad D. Al-Tahat, Ruba Najdawi, (2015), Using Malmquist Index Approach to Measure Productivity Change of a Jordanian Company for Plastic Industries, American Journal of Operations Research, published on 8 September 2015, pp. 384-400.

6. AL-Tahat, M. D. and Bwaliez O. (2015), Lean-Based Workforce Management in Jordanian Manufacturing Firms. Int. J. Lean Enterprise Research, Vol. 1, No. 3, PP 284: 316.

7. AL-Tahat M. D. and Jalham S. I. (2015) “A structural equation model and a statistical investigation of lean-based quality and productivity improvement". Journal of Intelligent Manufacturing, Volume 26, Issue 3, pp 571-583, (ISSN: 0956-5515).

8. AL-Tahat, M.D. (2014) “Design and Analysis of Lean Production Planning and Control System for NPF Company”, Applied Mechanics and Materials Vol. 575 (2014) pp 879-883 © (2014) Trans Tech Publications, Switzerland.

9. Mohammad Hayajneh, AL-Tahat, M.D., Salman Alshobaki, and Walid Khraisat (2014) “An Investigation for the Potential of Improving the Performance of Pattern Making Process in Steel Foundries: Case Study”, Applied Mechanics and Materials Vol. 575 (2014) pp 900-904 © (2014) Trans Tech Publications, Switzerland.

10. Al-Refaie, A., AL-Tahat, M.D. (2014) “Effects of Knowledge Management and

Organization Learning on Firms’ Performance “, The Journal of Nature Science and Sustainable Technology (JNSST), Vol. 8, Issue 3. ISSN: 1933-0324.

11. Al-Refaie, A., AL-Tahat, M.D., and Bata, N. (2014) " CRM/e-CRM Effects on

Banks Performance and Customer-Bank Relationship Quality", Accepted on 20 April 2014 for publication in International Journal of Enterprise Information Systems (IJEIS), Vol. 10, No. 2,. ISSN: 1548-1115.

12. Nabeel Al-Kurdi and AL-Tahat M. D. (2013) “Development and Analysis of Agile

Architectural Project Design”. Journal of Information, Intelligence and Knowledge (JIIK) Volume 5 Issue 4 (ISSN: 1937-7983).

http://link.springer.com/journal/542/22/4/page/1


13. AL-Tahat M. D., Abdul Kareem M. Abdul Jawwad, and Yousef L. Abu Nahleh, 2013. "Ordinal Logistic Regression Model of Failure Mode and Effects Analysis (FMEA) in Pharmaceutical Tableting Tools". Engineering Failure Analysis (ISSN: 1350-6307), Vol. 27(2013), pp. 322-332.

14. AL-Tahat M. D. and Khaled M. Bataineh, (2012) "Statistical analysis and

Modeling of the Implementation of Agile Manufacturing Tactics in Industrial Firms". Mathematical Problems in Engineering (ISSN: 1024-123X).. Vol. 2012. Article ID 731092. 23 pages. doi:10.1155/2012/731092.

15. Doraid Dalalah, AL-Tahat M. D., and Khaled Bataineh. (2012) "Mutually

Dependent Multi-criteria Decision Making", Fuzzy Information and Engineering,

Vol. 4, Issue 2, pp. 195-216. ISSN: 1616-8658. 16. AL-Tahat M. D. and Shahnaz M. Alkhalil. (2012), "Evaluation and Analysis of

Lean-Based Manufacturing Equipment and Technology System for Jordanian Industries". Proceeding of the World Academy of Science, Engineering and Technology. Issue 64, April 2012, pp. 1455 - 1461. Paris, France. ISSN 2010-376X.

17. AL-Tahat M. D. and Ayman Abu Gharbieh A., “A statistical Comparative Study of

ISO 9001:2000 Implementation in the Hashemite Kingdom of Jordan and in the United Arab Emirates", Accepted for publication in Dirasat, Engineering Sciences ( ISSN 1569-456X), April 2012.

18. AL-Tahat, M.D., and Al-Ali A. (2012) "Energy saving opportunities in Jordanian

pharmaceutical industries", Perspectives of Innovations, Economics & Business, Vol. 10, Issue 1, pp.25-36. ISSN: 804-0519.

19. AL-Tahat, M.D., Al-Refaie, A. and Al-Dwairi, A.F. (2012) "Performance

evaluation and analysis of a JIT–Kanban production system with sampling inspection", Int. J. Industrial and Systems Engineering, Vol. 11, No. 3, pp.225–249. ISSN: 1748-5037.

20. AL-Tahat M. D., Doraid Dalalah, and Mahmoud A. Barghash, (2012) "Dynamic

programming model for multi-stage single product Kanban-controlled serial production line" International Journal of Intelligent Manufacturing (ISSN: 0956-5515). Vol. 23, no. 23, pp. 37-48, DOI 10.1007/s10845-009-0336-0.

21. AL-Tahat M. D. and A. Al-Refaie. (2012), “Activity-Based Cost Estimation Model

for Foundry Systems Producing Steel Castings”. Jordan Journal of Mechanical and Industrial Engineering (JJMIE), Vol. 6, No.1, pp 75 – 86. ISSN 1995-6665.

22. Rami H. Fouad, Salman D. Al-shobaki, AL-Tahat M. D. and Al-Refaie Abbas.

(2012), "Executive Manager’s Opinion about Just-In-Time Implementation Status: an Exploratory Study in the Middle East Industry", Global Journal of Researches in Engineering-G. Industrial Engineering (GJRE-G)). Vol. 12 Issue 1 Version 1.0. ISSN: 0975-5861. Publisher: Global Journals Inc. (USA)

23. AL-Tahat M. D. and Hasan Al-Shoubaki. (2012), "Knowledge Management of

Maintenance Activities for Potable Water Distribution Business". Journal of Energy, Environment, and Economics (IJEEE). Vol. 20, no. 2, pp. 123-134 ISSN: 1054-853X.

24. AL-Tahat M. D. and Tayseer A. Daradkeh. (2011), "Investigating the Influence of

TQM Elements on the Overall Performance of Jordanian Municipalities", Proceeding of the 4th WSEAS Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS’11). WSEAS, Barcelona, Spain, September 15-17, 2011, ISBN: 978-1-61804-031-2.

25. Mohammad Hayajneh, AL-Tahat M. D., Walid Kraisat, and Salman Alshobaki.

(2011),"Experimental Investigation for the Elimination of Heat Treatment Related Distortion for the Production of 'Grizzly bar' Casting made of (12-14) %


Manganese Steel", Proceeding of the 4th WSEAS Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS’11). WSEAS, Barcelona, Spain, September 15-17, 2011, ISSN: 1792-4693, ISBN: 978-1-61804-031-2.

26. Abbas Al-Refaie and AL-Tahat M. D., (2011) "Solving the multi-response

problem in Taguchi method by benevolent formulation in DEA" International Journal of Intelligent Manufacturing, Vol. 22: pp. 505 - 521. DOI 10.1007/s10845-009-0312-8, ISSN: 0956-5515.

27. AL-Tahat M. D., A. Al-Refaie, and Fouad R. H., (2011) “Lean based performance

improvement for the production of 5-Burners gas oven”. Journal of Information, Intelligence and Knowledge JIIK (JIIK), Vol. 3, No. 3. ISSN 1937-7983.

28. A. Al-Refaie, L. Ming-Hsien, AL-Tahat M. D., and Fouad R. H., (2011) “ Applying

DMAIC procedure to improve performance of LGP printing Process”. International Journal Advances in Production Engineering and Management (APEM). Vol. 6, No. 1, pp 45 – 56. ISSN 1854 – 6250.

29. AL-Tahat M. D. and Ayman Abu Gharbieh A. (2011), “Evaluation of the

Implementation of ISO 9001:2000 in the Hashemite Kingdom of Jordan and United Arab Emirates”. Proceeding of the 6th International Working Conference ’’TOTAL QUALITY MANAGEMENT - ADVANCED AND INTELLIGENT APPROACHES’’, With Second Special Conference ’’Manufacture in Serbia 2011’’, Belgrade, Serbia, June 7-11, 2011.

30. AL-Tahat M. D. and Ayman Abu Gharbieh A. (2010), “A study for implementation

of ISO 9001:2000 based on organization type”. Proceeding of the International Science and technology Conference ISTEC - 2010. Turkish republic of northern Cyprus. Famagusta, October 27-29. 2010.

31. A. Al-Refaie, AL-Tahat M. D., and I. Jalham (2010), "A System Dynamics

Approach to Reduce Total Inventory Cost in an Airline Fueling System". Proceedings of the World Congress on Engineering WCE 2010, Vol. I, June 30 - July 2, 2010, London, U.K. ISBN: 978-988-17012-9-9. ISSN: 2078-0958.

32. AL-Tahat M. D., (2010), "Effective Design and Analysis of Pattern Making

Process Using Value Stream Mapping", Journal of Applied Sciences. 2010. Vol. 10. No.11.pp: 878-886. ISSN: 1812-5654. DOI: 10.3923/jas.2010.878.886

33. AL-Tahat M. D., and Eteir M. F., (2010), "An Investigation of the Potential of

Implementing Kaizen Principles in Jordanian Industries". Int. J. Product Development, Vol. 10, Nos. 1/2/3. pp: 87-100.

34. Al Shboul A. A., AL-Tahat M. D., and Abu Ghanimeh A. (2009), " Fuel poverty in

Jordanian households and residences: literature survey. Proceeding of GCREEDER 2009 Conference, Amman-Jordan. March 31st – April 2nd 2009.

35. AL-Tahat M. D., and Al Shboul A. A., (2009), "Identification and Implementation

of Measures for Tangible Energy Savings at JTIC Factory, Jordan. Proceeding of GCREEDER 2009 Conference, Amman-Jordan. March 31st – April 2nd 2009

36. AL-Tahat M. D., (2009), "Re-engineering of production processes using Value

Stream Mapping tool, case study: "ABC" Plant for producing tissue and hygienic paper". Journal of Information, Intelligence and Knowledge (JIIK) 2009, Vol. 1, Issue 3. pp. ISSN 1937-7983.

37. AL-Tahat M. D., and Rawabdeh I. A. (2008). "Stochastic Analysis and Design of

CONWIP Controlled Production Systems". Journal of Manufacturing Technology Management. Vol. 19, No. 3 pp. 253-273, DOI 10.1108/17410380810847945.


38. Abbasi G. Y., Sandouqa N. A., AL-Tahat M. D., Adnan M. Mukattash.(2007). "A look into Jordan’s Large Manufacturing Industries’ Risks. International Journal of Risk Management. Vol. 9, No. 2 pp.108-117

39. Al-Momani K. R., AL-Tahat M. D., Jaradat E. T. (2006), "Performance Measures

for Improvement of Maintenance Effectiveness: A Case Study in King Abdullah University Hospital (KAUH)". Proceeding of the International Conference on Service Systems and Service Management (ICSSSM'06). University of Technology of Troyes. October 25-27 2006.

40. Al Shboul A. A., AL-Tahat M. D., (2007), "Modeling of Building Evacuation

Processes Intended for Public Buildings", International Journal of Architectural Science Review. Vol. 50, No. 1, pp. 37-43.

41. AL-Tahat M. D., and Jalham S. I. (2008) 'Tracking production rate of CONstant

Work-In Process (CONWIP) controlled job shop', Int. J. Integrated Supply Management, Vol. 4, No. 2, pp. 230 – 245.

42. Mukattash A., AL-Tahat M. D., (2006), "A developed Mathematical computerized

approach for designing cellular manufacturing systems", Journal of Applied Sciences, Vol. 6, No. 9, pp.1915-1923, 2006. ISSN 1812-5654.

43. AL-Tahat M. D., Mukattash A. (2006), "Design and analysis of production control

scheme for Kanban-based JIT environment", Elsevier, Journal of the Franklin Institute, Vol. 34, No. 3, pp. 521-531.

44. AL-Tahat M. D., (2005), "Optimizing of Work In Progress (WIP) in Kanban

Controlled Production Lines". Dirasat, Engineering Sciences, Vol. 32, No. 2, pp. 123-132. ISSN 1569-456X.

45. AL-Tahat M. D. (2005), "A Queuing-Based Control Strategy for Kanban

Controlled Manufacturing systems". Proceeding of the 3rd Minia International Conference for advanced trends in Engineering. 3-5 April 2005 Egypt. El-Minia.

46. AL-Tahat M. D. (2005), "Investigation of a Queuing-Based Coordination Method

for a Single-Stage Kanban Controlled Supply Chain". Proceeding of the 1st National Conference on Logistics & Supply Chain 14-15 February 2005 Tehran. Iran.

47. AL-Tahat M. D. (2003), “Methods and Approaches in Design of Kanban-Based

Lean Production System”. Dissertation thesis in design and methods of Industrial engineering under the supervision of, F. Persiani and A. Liverani, University of Bologna. Italy.

48. AL-Tahat M. D., A. Liverani, F. Persiani, G. Caligiana. (2002), “Using Genetic

Algorithms to Optimize Kanban-based Production System”. Proceeding of the European Applied Business Research Conference. 2002, June 17 –21. Rothenburg-Germany

49. AL-Tahat M. D., A. Liverani, and F. Persiani. (2001), “Computer Supported

Design of Flexible Kanban System for A Multi-Stage Multi-Product Manufacturing” Proceeding of the 1st International Industrial Engineering Conference. 2001, Sept.23-27. Amman-Jordan.

50. AL-Tahat M. D., A. Liverani, F. Persiani. (2001), “Design of a Marketing Decision

Support Method for Price Quotation In a multi-Stage Single-product Kanban-Based Manufacturing Environment”. Proceeding of the XII ADM International Conference, 2001, Sept.5-7. Rimini – Italy.

51. AL-Tahat M. D., “Computer aided process planning”. Master Thesis in Industrial

Engineering under the supervision of, Z. Tahboub, S. Al-Bermani.1993. The University of Jordan.


19. Master thesis supervision

Student Name Thesis title Defense

Date S.N.

Ala'a M. AL- Habashneh الء فهيم الحباشنها

Studding the level of implementing concurrent engineering fundamentals in Jordanian Industries

August 2016 1

Mowafaq E. Jabri موفق عصام جبري

Estimation of Fuel Consumption in a Hypothesized Spoke-hub Worldwide Airliners Paradigm for the transportation of Passengers

May 2016 2

Rawan L. Abed روان فالح محمد العابد

Assessment of Innovation Implementation in Jordanian Healthcare Enterprises

May 2016 3

Osama Lutfi Al-refai اسامه لطفي الرفاعي

Scheduling of Pharmaceutical Production Line Using Mixed Integer Programing

August 2015 4

Enas Hamdan إيناس حمدان

A Structural Equation Modeling and a Statistical Analysis for the Implementation of Lean Management Practices in Jordanian Pharmaceutical Industries

May 2015 5

Mohammad Faris A Simulation Model for Analyzing and Redesigning Supply Chain for an Industrial Jordanian Firm.

May 2015 6

Malek Abdelkareem AL-Bakri مالك عبد الكريم البكري

Modelling a Strategic-Driven Selection of Supply Chain Performance Measures – HOQ Approach

May 2015 7

Omar Bawaliez عمر البواليز

Design and analysis of lean-based workforce management in Jordanian Industry

August 2012 8

Ayat Ahmad Wahbeh ايات وهبه

Predictive maintenance for medical equipment Dec. 2011 9

Ayman M. Awad

أيمن عوض

Optimal scheduling of preventive maintenance procedures for cigarette production line of Union Tobacco Company-Jordan.

Dec. 2011 10

Shahnaz Alkhalil الخليلشهناز

Development of an assessment tool for the implementation of lean production principles in the Jordanian industries

May 2011 11

Martin Khzouz مارتين خزوز

Life Cycle Cost Analysis to Examine Introducing Hydrogen as an Alternative Fuel in Jordan

April 2011 12

Areen Adel Husni Al-Ali عرين عا دل حسني العلي

Energy Saving Opportunities in Jordanian Pharmaceutical Industry

Nov. 2010

13

Yousef A. Abu Nahleh يوسف لطفي ابو نحلة

Failure Mode and effects analysis (FMEA) In the Pharmaceutical Tableting Tools

July 2010 14

Hassan Alshobaki حسن سليمان أحمد الشوبكي

Developing an Expert Operations and Maintenance Management System (EOMMS) in Jordan Water Company - MIYAHUNA

March 2010 15

Ayman F. Abu Gharbieh ايمن فاروق ابو غربية

A Comparative Study for ISO 9001:2000 Implementation in The Hashemite Kingdom of Jordan and United Arab Emirates state "

Dec. 2008 16

Diana S. Al-Rbihat ديانا سليمان ربيحات

Process Re-Engineering of the Prevention and Self Protection Department at the Jordanian Civil Defense

Nov. 2008 17

Tayseer A. Daradkeh تيسير علي درا دكه

Applying the Concept of Total Quality Management In Irbid greater Municipality

Aug. 2007 18

Murad F. Eteir مراد فايز عطير

Studying the ability of Jordanian Manufacturing Companies to utilize the principles of Continuous Improvement (KAIZEN)

May 2007 19


Khaldoun B. Al-Shreideh بسام الشريدةخلدون

Analysis of KANBAN- Based JIT Production system based on Queuing Theory

May 2005 20

20. Evaluated Promotions and Reviewed Researches (Selected)

Date Country/Publisher Journal/ Institute etc. Subject/ Area of research S.N.

Evaluated Promotions

2017 Republic of Iraq Albasrah University A Promotion to Professor of IE 5

2016 Jordan The university of Jordan Many promotions to full professorship and to Associate Professor

6

2015 Republic of Iraq Albasrah University A Promotion to Professor of IE 5

2013 Hashemite Kingdom of Jordan

Ajloun National University A Promotion to Associate Professor of Marketing

4

2012 Kingdom of Suadi Arabia

Majmaah University A Promotion to Associate Professor of Industrial Engineering

3


Jordan University of Science and Technology (JUST)

A Promotion to Associate Professor of Industrial Engineering

2


Jordan University of Science and Technology (JUST)

A Promotion to Associate Professor of Industrial Engineering

1

Selected Reviewed Awards

2012 Ministry of higher education and scientific research

Scientific Research Support Fund/ The best thesis Award for academic Universities in Jordan

Maintenance of Medical Devices

1

Selected Reviewed Research Projects

2015 University of Applied Sciences

Scientific Research Support Fund

Detailed Proposal Evaluation. simulation and promodel simulation software

2

2013 Ministry of higher education and scientific research

Scientific Research Support Fund

Detailed Proposal Evaluation, Submitted to the 2nd research cycle 2012.

1

Selected Reviewed Researches

2016 Taylor & Francis International Journal of

Production Research Performance comparison of multiple Product Kanban Control systems

21

2016

Springer Operational Research: An International Journal

Optimal multiple-period scheduling and sequencing of operating room and intensive care unit

20

2016 The Hashemite University Jordan

JJMIE- Jordan Journal of mechanical and industrial engineering

Optimal scheduling and sequencing of operating room under emergency cases

19

2016

Nova Science Publishers, Inc. USA

Journal of Nature Science and Sustainable Technology (JNSST

Examining the Safety Performance and Safety Behavior in a Nuclear Power Plant using structural equation modeling

18

2015 Nova Science Journal of Nature Science Assessing Energy Efficiency for 17


Publishers, Inc. and Sustainable Technology (JNSST

Industrial Sector in Jordan Using Data Envelopment Analysis

2014 Science publishing group

International Journal of Science, Technology and Society

Optimization and shelf life extension of flax seed milk paneer by hurdle technology

16

2014

Springer Journal of Intelligent Manufacturing (JIM)

A Divide-and-Conquer-Method for the Synthesis of Liveness Enforcing Supervisors for Flexible Manufacturing Systems

15

2013 Inderscience International Journal of

Modelling in Operations Management (IJMOM)

Sensitivity Analysis of Hotels’ Ranking by Service Quality Analysis and TOPSIS

14

2011 Springer Journal of Intelligent Manufacturing (JIM)

Neural Network Application in a non-traditional machining Process.

13

2011 Nova Science Publishers

Journal of Information, Intelligence and Knowledge (JIIK)

Markovian Modeling of EPQ 12

2011 Emerald Humanitarian logistics and Supply Chain Management

Lean and Agile management 11


A Neural Network Prediction of process Performance

10


Action plan management 9

2009 elsevier MEAS Evaluating measurement and process capabilities by GR&R with four quality measures

8

2008 Taylor and Francis Int. J. of Systems Science Meta-Heuristic Modeling of a Kanban System

7

2008 Inderscience publishers

Int. J. of Adaptive Infrastructures

Max-Plus Algebra Application in a Manufacturing Process.

6


Int. J. of Manufacturing Technology and Management

Definition of flexible transfer line with rework paths and its simulator for optimal production design

5


Transition to Lean production and ordering policies

4

2008 Hashemite University/ Jordan

Jordan Journal of Mechanical and Industrial Engineering

Stochastic analysis of maintenance system

3


Int. J. of Intelligent Systems Technologies and Applications

Genetic algorithm Application on flexible Transfer line

2

2012 & 2013

World Scientific and Engineering Academy and Society

WSEAS Conferences and Journals

More than 39 paper 1

21. Final Year projects supervision (Selected) 1. Bayan A. S.., Haya A. S., Farah A. B., and Razan A. K. A Structural Equation

Model of Innovative Health-Care Management System. May 2015. 2. Jan. 2015 3. Ruqia AL-Ja’afreh, Raya AL-Masri, Manar AL-Shamaileh, and Rand AL-Salwh.

Queuing-based assessment of the performance of banking services, case study: Bank of Jordan. May 2013.

4. Amneh Nazzal, Ayat AL- Mughrabe, and Enas AL-Salaymeh. Faculty member selection using Analytic Hierarchy process (AHP). May 2013.


5. Yazan, Hatham, Mohammad AL-Falah, and Abdullah AL-Oran. Creating and Marketing an E-Commerce website. May 2013.

6. Ala’a AL-Marzouq, Asala AL-Tarakyah, Mais AL-Tarawneh, and Noor AL-Bokairat. Lean based project management. May 2013.

7. Ala'a Al-Hbashneh, Aseel Al-Soud, and Asma'a Al-Sadonee. Concurrent Engineering. May 2012.

8. Liana Y. Mahmoud and Rawan S. Wadi. Lean based production planning and inventory control systems. May 2012.

9. Bilal Abdulrazzaq, Mohammad Abo Alrob, Amer AL- Ghathban, and Ahmad Alzubi. Design and analysis of lean based shop floor management system. January 2012.

10. Mohanned Seder, Maha Balawi, Thamer Al-Awamleh, and Omida Rasmi. Design and analysis of lean based processes technology and Know-How Management System. January 2012.

11. Danna Abu Naaj, Doa'a Al-Atiyat, Rahmah, Almasri, and Farah Abu-Shattal. Design and analysis of lean based production planning and inventory control system. January 2012.

12. Ahmad Arafat, Ziyad AL-Bizreh, and Jawdat Higab. Design and analysis of lean based supplier relationship management system. January 2012.

13. Alhassan Ali, Ahmad Jaber, Issa Salman, and Nemer Albahrat. Design and analysis of lean based product design and development model. January 2012.

14. Mohammaed Zyadeh, Ahmad Abo-Arqoup, Yazeed Abu-Hamour, and Mohammed Sa''ed. Design and analysis of lean based layout design, case study: Al-Hussam Plastic Industries Co. May 2011

15. Halemah Atiyat, Muna AL-Rjailat, Ohood AL-Eiafan, and Zina AL-Nobani. Design and analysis of lean customer relationship management system, May 2011.

16. Diala AL-Hyari, Hiba Karadsheh, Nadeen Aburub, and Omer AL-Assi. Design and analysis of lean based workforce management system, May 2011.

17. Ahmad Fahmawi, Khalid Abdlqader, and Osama Zmeili. Design and analysis of lean based Quality and Productivity Improvement and measures system, May 2011.

18. Ahmad M.A. Mahasneh and Mohammad Na'amneh. Assessment of the implementation level of some lean management tools in Jordanian industries. May 2010.

19. Ala' Mubasher, Abeer Abd-Arrahman, and Linda Fakoury. Improvement of maintenance department at Ibn Alhaithem Hospital, January 2009.

20. Layth S. Haddad, Rawan S. Habash, and Sara M. Oweis. Transshipment modeling of Ghadeer distribution network, January 2009.

21. Seren Mukattash, Maha Ghrayyeb, and Shatha Ahmad. Analysis of Petri nets, May 2008.

22. Ehab Melhem, Rawan Al-Amr, and Fadi Al-Hourani. Implementation of Six Sigma Principles in Jordan Data Systems JDS, May 2008.

23. Yousef Mohammad, Mohammad Hasweh, Mohammad Mubideen, and Ahmad Maraqah. Energy Management at Jordan Tobacco International factory, May 2008.

24. Ahmad Al-Naser, Ahmad Al-Esawi, Ibrahim Omari, and Zaid Al-Jazi. Value Stream Mapping VSM, Petra Aluminum Company, May 2008.

25. Asem Thyabat, Houston, and Omar Jaradat. Lean-Based Analysis and Evaluation of National paints Production system: Alkyd department, January 2008.

26. Anood Efaishat, Hala Madanat, and Zeena Borgan. Value Stream Mapping. January 2008.

27. Mohammad Mahmoud, Bajis Al-Majali, Haneen Al-Sharaiha, and Mohammad Al-Thaher. Production Line Analysis for Crown Can Co. Ltd. May 2007.

28. Salah Mourtaga and Sahel Azizi. Implementation of Queuing Theory on Cairo Amman Bank May 2007.

29. Mohammad Abu Safieh, Fares Haddadin, and Hussein Tadros. An approach for seeking ABET accreditation for the industrial engineering department. May 2007.

30. Abdelkader Rawashdeh, Jamal Abdeen, Zaid Hassan, and Murtada Abu-Hadi. Effective design and analysis of gas cocker assembly line, case study: Rum-Aladdin Industries Company, May 2006.

31. Naeem Al-Kilany, Ayham Al-Masaadeh. Implementation of Total Quality Management principles in ARITAL Company. January 2006.


32. Mohammed S. Shatrit. Effective design of varnish cleaning system for ink industry. May 2005.

22. Industrial Projects and Technical Studies

1. Al-Tahat M. D., Sep. 2003. Process Improvement and productivity, a study for Arab Engineering Industries Company AEICO. Supported through Faculty for Factory program 1st cycle 2003. University of Jordan.

2. Al-Tahat M. D., Sep. 2004. Analysis of Cost Estimating Method at Arab Engineering Industries Company AEICO. Supported through Faculty for Factory program 2nd cycle 2004. University of Jordan.

3. Al-Tahat M. D., Sep. 2005. Analysis and Design development of the Gas Cocker Assembly Line At Rum Metal Manufacturing Company. Supported through Faculty for Factory program 3rd cycle 2005. University of Jordan.

4. Al-Tahat M. D., Sep. 2006. Design and Analysis of Effective Quality System and Methods for Arab Company for Italian wood Manufactures (ARITAL). Supported through Faculty for Factory program 4th cycle 2006. University of Jordan.

5. Al-Tahat M. D., Sep. 2007. Design and Analysis of Effective Production Planning and Control System for Company of National Paints Factories/ Sayegh Group. Supported through Faculty for Factory program 5th cycle 2007. University of Jordan.

6. Al-Tahat M. D. and others, Oct. 2007. A study for heat treatment problems and evaluation of the pattern production technology At Arab Engineering Industries CO. (AEICO). Supported Through Higher Council of Science and Technology (HCST), Jordan.

7. Al-Tahat M. D. and others, Sep. 2008. Stand – Alone Photovoltaic Systems using solar energy for the ring road of Amman City, A feasibility and technical study, presented to ministry of public works and housing.

23. Training: The Following training programs were Conducted:

S. n. Country Place

Period of Time

Program Title

Training Hours

Participants Organizer

9 Kingdom of Saudi Arabia

Dammam Khubar

23th -27th November

2014

Supply chain management

40

Employees of Saline Water Conversion Corporation

Success Steps Training and Education

Company Ltd.


Jeddah 26th -30th October

2014

Supply chain management

40



Company Ltd.


Jeddah 15th -19th

June 2014 Supply chain management

40



Company Ltd.


Dammam Khubar

8th -12th December

2013

Inventory management

40 Employees of Saline Water Conversion



Corporation Company Ltd.


Jeddah 29th Sep.-10th Octo.

2013


40



Company Ltd.


Dammam Khubar

25th -29th August 2013


40



Company Ltd.


Jeddah 30th June –

4th

July 2013


40



Company Ltd.


Jeddah 8th – 12th

June 2013 Inventory

management 40



Company Ltd.


Jeddah 11th – 15th

May 2013 Inventory

management 40



Company Ltd.

24. Training: The Following training programs were attended:

1. One-Week Intensive Training Course on Innovation and Entrepreneurship.

November 12-16, 2012, COMSTECH Building, 33-Constitution Avenue, G-5/2, Islamabad, Pakistan.

2. Foundry Technology of Steel and Iron Castings. Central Metallurgical Research and Development Institute - (CMRDI) Cairo / Republic of Egypt. 1/12/1994 – 21/04/1995.

3. Main problems in steel casting production. INSTYTUT ODLEWNCTWA W Krakowie. Republic of Poland. April 1996.

4. Advance AutoCAD 3D at Jordan Star system company / Irbid- Jordan. 27/9/1995- 27/12/1995.

5. Operating Measuring Machine Working With SOFTIOS 3D System by the Institute of Metal Cutting. Republic of Poland. February 1997.

6. Foundry Management Software DEWTEC. DEWTEC Systems Limited. March 1999.

7. One month of training on “Foundry Technology” at Foundry Research Institute (FRI)-Republic of Poland.

8. AutoCAD 12, university of Jordan, Amman, Jordan. 11/6/1995-19/7/1995. 9. Excellent In the Art of Selling” at Arab Consultants Company, Jordan. December

1998. 10. Novell 4.1 Administration. Computer and Communications Systems. Jordan.

February 1997. 11. Pricing strategies and competition. Jordan institute of management, Amman,

Jordan. April 1999. 12. Primavera project planner (P3) for project planning and control" at Jordan

University of Science & Technology. Jordan University for Science and Technology. September 1999.

13. Advances in computer aided materials engineering (Rapid prototyping and remote manufacturing). Trieste. Italy. 9-11 December 2004.

14. Statistical Packages for Social Sciences "SPSS", University of Jordan, September 2008.

15. Knowledge Management in Modern Organizations, University of Jordan, August 2008.

16. Human Resource Management, University of Jordan, September 2008.


25. References: 1. Professor Mohammed Hayajneh, Ph.D

Professor of Mechanical and Industrial Engineering Faculty of Engineering Jordan University of Science and Technology P. O. Box 3030 Irbid 22110, JORDAN Tel: 00962-2-720-1000 Ext.22547 (Main Office) Cell: 00962-79-5678692 Fax: 00962-2-720-1074 Att: Prof. Mohammed Hayajneh Email: [email protected]

2. Ammar A. Al-Rousan, Ph.D. Associate Professor, Chairman Department of Industrial Engineering Hijjawi Faculty for Engineering Technology Yarmouk University, 21163 Irbid, JORDAN Tel: +962 2 7211111, Ext. 4291 Cell: 00962-77-6702905 Email: [email protected]

3. Saed mismar, Ph.D.

Associate Professor, Chairman Industrial Engineering Department School of Engineering The University of Jordan Amman 11942 Jordan Tel. (Work): +962 6 5355000 Ext. 22930 Cell: 00962-79-1698470 Email: [email protected]


https://mail.ju.edu.jo/owa/redir.aspx?C=zGviMJcwnVxKI8sOvJnuxFfcFuNdY0EUUCBGyNcTA8wmXlQkI1jUCA..&URL=mailto%3aakoran%40yu.edu.jo


Documents

CURRICULUM VITAE - University of Jordaneacademic.ju.edu.jo/altahat/My CV/CV Academic site.pdf · of Tabuk in Saudi Arabia during the academic year 2015/2016, and currently he is working