Curriculum Vitae- Sept 2013

Curriculum Vitae- Sept 2013

CURRICULUM VITAE

1. PERSONAL DATA

Name : WAHID BIN OMAR

I/C No : 620527-08-5889Citizenship : MalaysiaDate of birth : 27th. May 1962Place of birth : Kampong Temerlok, Trong, Taiping, Perak.

Staff number : 2537

Office : Office of the Vice Chancellor,Level 3, Bangunan Canseleri Sultan IbrahimUniversti Teknologi Malaysia81310 UTM Johor BahruJohor MALAYSIA

Faculty of Civil Engineering,Universiti Teknologi Malaysia,81310 UTM Johor Bahru, Johor.

E-mail : [email protected]

Residence : 24, Jalan Pulai Perdana 3/6,Taman Sri Pulai Perdana,81110 Johor Bahru,Johor Darul Takzim.

Telephone : +607-5530000 (office)+6019-7533000 (mobile)

2. ACADEMIC QUALIFICATIONS

1. 1983 Diploma in Civil Eng.-Universiti Teknologi Malaysia.

2. 1986 B.Eng. (Hons) in Civil Eng.-University of Strathclyde, Scotland, UnitedKingdom

3. 1989 M.Sc in Bridge Engineering-University of Surrey, United Kingdom

4. 1998 Ph.D in Civil Engineering, University of Birmingham, United Kingdom.

1


Title of thesis: The Shear Assessment of Concrete Beams With a Honeycombed Zone Present in the High Shear Region.

3. AWARDS

2003 Anugerah Khidmat Cemerlang UTM 20022004 Anugerah Jasa Bakti UTM 2003 (20 years service to UTM)2007 Anugerah Khidmat Cemerlang UTM 20062011 Anugerah Khidmat Cemerlang UTM 20102012 Bronze Award – 14th Industry Art and Technology Exhibition (INATEX) 2012

Oct 201

4. PROFESSIONAL MEMBERSHIPS

1. Member of the Institution of Engineers, Malaysia, (MIEM, 19629).2. Professional Engineer, registered with the Board of Engineers, Malaysia, (10420)3. Member of the International Association for Bridge and Structural Engineering,

IABSE, (408461)4. Member, The Concrete Society of Malaysia, PERKOM, (MCSM M0129)5. Member, American Concrete Institute, KL Chapter (Membership No. 100)6. Member, International Committee on Concrete Model Code for Asia (ICCMC)7. Member Asian Concrete Federation (ACF)

5. CURRENT POSITION

Vice-Chancellor, UTM – Starting 1 September 2013 until 31 October 2016Deputy Vice-Chancellor (Development), UTM – incharge of Assets and Facilities, Infrastructural Development, Finance, Endowment, Information and Communication Technology, Equine Centre, OSHE, Scholar’s Inn JB.Professor, Faculty of Civil Engineering, UTM

6. CURRENT ADMINISTRATIVE POSTS / EXTENDED RESPONSIBILITIES IN THE FACULTY, UTM AND OUTSIDE UTM

Sept. 1, 2013 – now Vice-Chancellor, UTM

Oct 1, 2011 – 31 Aug. 2013

Deputy Vice-Chancellor (Development), UTM

Member of University Managament Committee

5 Feb 10 – 12 April 14 Board Member, Lembaga Lebuhraya Malaysia

Jan 2011- Jan 2013 Member of University Senate

1 March 12 – 28 Feb 14 Advisory Penal, International Business School, UTM

Dec 2012 - Board Member, Uni-Technologies Sdn Bhd

Dec 2012 - Board Member, UTM Holdings

March 2012 - Board Member, UTM Space Services

2


6. CAREER HISTORY

13 June 1983 Assistant Lecturer B (UTM)

19 July 1986 Assistant Lecturer A (UTM)

7 November 1989 Lecturer (UTM)

1993-Professional Training at PSC Freyssinet and Zainal Abidin Jurutera Perunding (one year).

1 June 2000 Associate Professor (DS 54)

2 June 2008 Professor VK07

15 Oct 2008 – 30 Sept 2011 Director of Works, Office of Asset and Development, UTM

22 June 2011 Professor VK06

1 Oct 2011 – 31 Aug. 2013 Deputy Vice-Chancellor (Development), UTM

7. ADMINISTRATIVE POSTS / EXTENDED RESPONSIBILITIES (PAST EXPERIENCE)

1986-88 Member of the Editorial Board of Jurnal Kejuruteraan Awam

1988 A committee member of `The Regional Conference on Computer Application in Civil Engineering' (RCCACE 88) organised by FKA, UTM.

1990-92 Head of Prestressed Concrete LaboratoryBuying equipments for the lab. One of the major task was monitoring the commissioning of 1000 ton pre-tensioning bed. Organised training to lab technicians and prepared the operating and safety guidelines for the prestressing operation in the lab.

1990 Secretary, Bridge Engineering Short Course (conducted by Prof L.A. Clark).

1990 Committee member of Gelang Patah Water Supply Project-Community service project (3SKA project).

1991 Committee member in organising `The Regional Conference on Computer Application in Civil Engineering' (RCCACE 91).

1990-91 Representing Department of Structures to the FKA's UTM Open Day committee.

1992 Committee member of the Seminar on Structural Engineering Software.

1994 Organise a Technical Visit for 7 lecturers from FKA to LRT and Menara Kuala Lumpur projects.

1995 A member of the 'UTM-Renong Link Kedua Training Package'-giving lecture on bridge design to the trainee Engineers.

3


1998-99 Coordinator of SPACE FKA (special task: Webmaster SPACE FKA)

June 99-Feb 2000 Ketua Jabatan Kursus Ijazah Lanjutan, FKA

June 99-Feb 2000 Secretary of the Postgraduate Studies Committee

June 99-Feb 2000 Secretary of the Industrial Training Committee (coordinator)

Oct 99- Nov 2000 Member of a Committee to publish a book ‘Three Decades of Faculty of Civil Engineering’

Aug - Nov 2000 Member, ‘Eurocodes Forum’ Committee set-up under IEM.

Mac-Sept 2000 Deputy Chairman, Asia Pacific Structural Engineering and Construction Conference (APSEC 2000).

Jan-Mei 2001 Chairman, Profesional Development Seminar 2001

May 2001-Dec 2001 Chairman, The First National Bridge Model Competition, FKA, UTM

Mac 2002 Member of a Task Force of faculty’s exhibition in conjunction with UTM 30 years.

Mac 2000-Sept 2003 Head, Department of Structures and Materials As Head of the Department, sits in various committees in the Faculty

Dec 2000-Oct 2003 Chairman, Asia Pacific and Structural Engineering Conference, APSEC 2003, 26-28 August 2003.

July 2001- 2003 Deputy Chairman, IEM Position Statement Committee on Concrete Code of Practice After 2006.

Aug-Dec 2004 Member, Organising Committee, Conference on Engineering Education, CEE 2004, UTM

November 2004 Ahli Penal Penilai Kenaikan Pangkat ke Pensyarah Kanan (DS 52) Fakulti Kejuruteraan Awam

Jan 2005 Organise Faculty Yearly Planning Workshop for 2005

Feb – Oct 2005 Chairman, Task-Force for Vice-Chancellor Quality Award 2005, FKA

2004, 2005,2006, 2007 Member, Penal Penilai Anugerah Penerbitan Naib Canselor

June 2005 Chairman, Workshop on Quality Assurance, Graduate Program, FKA

September 2005 Ahli Penal Penilai Kenaikan Pangkat ke Pensyarah Kanan (DS 52) Fakulti Kejuruteraan Awam

Jan 2004, 2005, 2006 Ahli Penal Pergerakan Gaji FKA

June 2006 Ahli Penal Penilai Kenaikan Pangkat ke Profesor Madya (DS 54) Fakulti Kejuruteraan Awam

4


Disember 2006 Ahli Penal Penilai Kenaikan Pangkat ke Pensyarah Kanan (DS 52), Fakulti Kejuruteraan Awam

Mei 2002- 2006 Member of ‘Construction’ Focus Group, UTM

June 2007 Ahli Penal Penilai Kenaikan Pangkat ke Profesor Madya (DS 54) Fakulti Kejuruteraan Awam

Nov 2002- 2007 Chairman, Technical Specification Committee (Teaching and Training), IDB Budget, Fakulti Kejuruteraan Awam

April 2007 Member, Jawatankuasa Khas Penilaian Anugerah Penerbitan, UTM

April 2007 Chairman, Task-force of Anugerah Penerbitan Universiti, FKA

August 2007 Head, Penal of Judges (School Category), National Bridge Model Competition, UTM

October 2003- 2007 Member, Working Group (Technology, knowledge and R & D), Malaysia Construction Industry Masterplan, CIDB

Jan 2006 Organise Faculty Yearly Planning Workshop for 2006

Jan-Feb 2007 Leading in Organising Faculty’s Strategic Planning Workshop (2007-2010)

Sept 2003-31 Mac 2008Deputy Dean (Research and Post Graduate Studies)Faculty of Civil Engineering

At Faculty Level

Chairman, Postgraduate Study CommitteeChairman, Academic Publication CommitteeDeputy Chairman, Research Coordination Committee of the faculty

Member of (at University level):

Senate Standing Committee on Graduate StudiesPostgraduate CommitteeResearch Coordination CommitteeAcademic Publication CommitteeRanking and Rating CommitteeConsultancies Committee

March 2006- Feb 2008 Academic External Examiner for Graduate Engineering Program (Civil Eng), Universiti Tenaga Nasional (UNITEN)

August 2007 – May 08 Member, Task-Force for Vice-Chancellor Quality Award 2007, FKA

August 2005- April 08 Chairman, Infrastructure and Facilities Committee, FKA

April 1 - Oct 15, 2008 Deputy Dean (Academic), Faculty of Civil Engineering, UTM5


Management Representative (ISO 9001:2000), FKAChairman, Curriculum and Syllibus (UG)Chairman, ISO Committee

Member at faculty level:

Jawatankuasa PentadbiranJawatankuasa AkademikJawatankuasa PeperiksaanJawatankuasa Kewangan dan AkaunJawatankuasa KualitiJawatankuasa Kepakaran dan Kemahiran StafJawatankuasa Latihan Industri

University Level:

Member:Senate Standing Committee on Teaching and LearningSenate Standing Committee on New Programme

Feb 2001-2008 Member, Committee of Director, Construction Technology and Management Centre (CTMC), UTM.

Feb 2001-2008 Member, Committee of Director, Steel Technology Centre (STC), UTM.

Jan 99-2008 Coordinator of the 'Bridge Design and Assessment Group' (Research and Consultancy Group)

Mac 2002- present Member of Technical Panel (IRPA) of Construction Focus Group UTM

June 2003- 2008 Member, Technical Committee ‘Standard for Design of Concrete Structure’, SIRIM/IEM

June 2003- 2008 Member, Working Group (Manpower), IBS Roadmap program, CIDB

August 2003- 2008 Chairman of Working Group (WG) on Creep and Shrinkage formed under Technical Committee on Concrete Code of SIRIM/IEM

Feb 2007- Jan 2009 Committee Member, Construction and Infrastucture Technologies Research Cluster, Research Management Centre, UTM

Januari 2008 Ahli Penal Penilai Kenaikan Pangkat ke Profesor Madya (DS 54) dan Profesor (VK 7) Fakulti Kejuruteraan Awam

8. TEACHING

DIPLOMA (CIVIL ENG)

1986-88

6


DKA 1114 Strength of Materials - second year students ( 3 semesters)

B. ENG (CIVIL ENG)

1989-95

SKA 4243 Prestressed Concrete Design- final year students (10 semesters)

1998-99

SAW 5333 Prestressed Concrete Design- final year students (1 semester)

SAA 3243 Reinforced Concrete Design- third year students (1 semester)

1999-2000

SAW 4333 Prestressed Concrete Design- final year students

SAA 3243 Reinforced Concrete Design- third year students

SAA 4073 Research Methodology and Problem Solving in Civil Engineering

2000-2001

SAA 4334 Prestressed Concrete Design- final year students

SAM 1012 Mechanic of Statics-first year students

SAC 4414 Advanced Construction Technology – final year students

2001-2002

SAA 4334 Prestressed Concrete Design- final year students

SAC 4414 Advanced Construction Technology– final year students

2002-2003

SAM 3313 Reinforced Concrete Design 1- third year students

SAC 4414 Advanced Construction Technology– final year students

2003-2004

SAM 3313 Reinforced Concrete Design 1 – third year students

2004-2005

SAM 3313 Reinforced Concrete Design 1 – third year students

2005-2006

SAM 3313 Reinforced Concrete Design 1– third year students

2006-2007

SAM 3313 Reinforced Concrete Design 1– third year students7


2007-2008

SAB 4323 Prestressed Concrete Design– final year students

2009 – 2010

SAB 3353 R.C. Design 1

2010 – 2011

SAB 4323 Design of Prestressed Concrete

2011 – 2012

SAB 4323 Design of Prestressed Concrete

B. EDUCATION TECHNOLOGY (CIVIL ENG)

1994-95

STA 4113 Reinforced Concrete Design- final year students (2 semesters)

1999-2000

SPK 4342 Reinforced Concrete Design

M. ENG (STRUCTURES)

1989

SKA 5243 Advanced Structural Design- (1 semester)

1993

SKA 5263 Bridge Engineering

1999-2000

MAW 1313 Bridge Engineering

2000-2001


MID 1273 Construction Technology

2001-2002


2002-2003


MID 1273 Construction Technology8


2003-2004



2003-2004


2004-2005

MAB 1053 Bridge Engineering


2005 - 2006


MAB 1193 Design of Precast Concrete

2006 - 2007


2007 - 2008


MAB

2008 – 2009

9. SUPERVISION OF FINAL YEAR PROJECTS AND MASTER’S PROJECTS

B.ENG-CIVIL

1990 Yufardi Djamily, 'The Aspect of Design of Medium Span Concrete Bridge'

1991 Suria Harun, 'Prestressed Concrete Practice in Malaysia'Sim Wooi Keat, 'Bridge Deck Analysis- Finite Element'Shaharin Hamid, 'The Causes of Bridge Failure in Malaysia'

1992 Muhd. Zakuan Tajul Arifin, 'The Assessment of Concrete Bridge'Oo Gin Pheng, 'Bridge Deck Analysis Using Microcomputer'

Abd Wahab Ismail, 'The Study of Bridge Maintenance in Malaysia'Ramlee Mamat, 'Visual Inspection on Concrete Bridge'Azehari Abdul Aziz, 'Timber Bridge in Malaysia'

1993 Abd Halim Yob, 'The Construction of Steel Bridge- Case Study of Sungai Kerian Bridge'Noor Leila Md Saad, 'Bridge Bearings'

9


Haslinda Karim, 'Bridge Structures in Malaysia'

1995 Sue Chee Hoong, 'The Evaluation of Prestress Losses in High Strength Prestressed Concrete'Wong Sam Meng, 'Transmission Length in High Strength Prestressed Concrete'

1999 Goh Mea Keh, 'The Plasticity Theory in Structural Engineering'

1999 Lam Yoke Meng, 'Shear Capacity of Beam With a.Weak Concrete Zone'Nurzaman Aminuddin, 'Construction joint in Concrete Beam- The Effect on Shear Capacity'Eng Hiap Hoe, 'Shear Assessment of Bridge Structures- Analytical Method'Chong Lai Boon, 'Rekabentuk Jambatan Konkrit Prategasan'Goh Lee Hian, 'Rekabentuk Asas Bangunan Mneggunakan Excel'Lee Peng See, 'Analysis dan Rekabentuk Culvert Menggunakan Excel'Cheeng Sui Ping (SPACE), 'Analysis and Design of Prestressed Flexural Members Using Spreadsheets For Commercial Application

2000 Sek Chin Yong, ‘Design of Steel Bridge Deck Using Local Steel Section’How Chi Wei, ‘Design of Steel Bridge Deck Using Local Steel Section’Low Chee Leong, ‘Design of Steel Bridge Deck Using Local Steel Section’Suhaila Salimin, ‘The Design of Prestressed Slab’Arreshvhina Narayanan, ‘The Use of EC2 in Concrete Design’

2001 Yap Choy Keen, ‘Analysis and Design of Continuous Prestressed Concrete Beam’Tee Chee Jong, ‘The Innovation in the Construction of Steel Bridge Using Local Sections’Tan King Hong, ‘Analysis and Design of Prestressed Flat Slab’Lim Gim Loon, ‘Flexural Behaviour of Lightweight Prestressed Concrete- Computer Modelling’

2002 Teng Wei Hong, ‘Analysis and Design of Pretensioned Flat Slab’Russell Ng Kwang Lin, ‘Analysis of Bridge Deck’Alvin Yeo Lung Lung, ‘A Study on Concrete Code of Practice in Malaysia- Comparison Between BS 8110 and EC2’

2003 Lou Khee Fang, ‘Comparison Study of Footbridge System in Malaysia’Goh Eng Hock, ‘Comparison Study of Long Span Flooring System’Mastura Azmi, ‘Creep and Shrinkage: Study on Malaysian Concrete’Liong Siok Jen, ‘Analysis of Precast Concrete Bridge’Tan Pui Lai, ‘Shear Design of Reinforced Concrete Beam: Comparison between EC 2, BS 8110 and ACI 318’

2004 Zubir Mohd Salleh (SPACE), ’Joint in Precast Concrete Structure’Lim Say Wei (SPACE), ‘A Study on the Differences between In situ and Precast Concrete Construction: Cost, Time and Quality’Khairullizam Abu (SPACE), ‘Study on the Design of Load Bearing Wall in Multy-Storey Precast Concrete Building’Md Riza Mohd Shah (SPACE), ‘The Design of Half-Slab’

2005 Irma Fitta Putri Burtis, ‘Comparison of Concrete Shrinkage Between BS 8110, Eurocode 2 and Experimental Work’

10


Neo Boon Chin, ‘Cube and Cylinder Concrete Strength: Comparison Between EC 2, BS 8110 and Lab Test’Lim Fu Yee, ‘Determination of Concrete Strength: Comparison Between EC 2 and BS 8110Tan Koon Wee, ‘Comparison Between System and Conventional Formwork’

2006 Nik Fatimah Nik Zulkifli, ‘Prestressed Concrete Design-Comparison between BS 8110 and EC 2’Khairil Anwar Mohammed, ‘The Behaviour of Laterally Confined HSC Column Under Axial Loading’Nor Nasyriq, ‘The Strength and Ductility of Laterally Confined HSC’Adly Dasril, ‘The Strength and Ductility of Laterally Confined HSC’

2007 Azli Mohd Hashim, ‘Study on the Concept and Design of Integral Bridge as Practiced by JKR’Mohamad Lokman Mohamad Ali, ‘Determination of Concrete Strength of an Existing Building’Azhani Zukri, ‘The Design Life Prediction of Concrete Structure Subjected to Corrosion of Reinforcement’Teow Ching Ching, ‘The Effect of Creep and Shrinkage on the Deflection of Prestressed High Strength Concrete Beam’Mohd Hafis Jamil, ‘Analysis and Design of Cantilever Retaining Wall Using Microsoft Excell Worksheet’Mohd Faiza Yahat, ‘Study on the use of Metal Strap as Pre-tensioned Lateral Confinement for High Strength Concrete’

2008 Ma Chau Khun, ‘Behaviour of High-Strength Concrete Confined with Steel Strap’Ng Jen Hau, ‘‘Behaviour of High-Strength Concrete Confined with Steel Strap’Saiful Azhar Hashim, ‘Creep and Shrinkage: Comparison Between Design Codes’M. Shahrul Azri Mamat,’Conceptual Analysis of Integral Bridge’

2010 Kang Sik Wei, ‘Causes, Effects and Methods of Minimizing Delays in Construction Projects’Low Yei Wai, ‘Cash Flow Planning of Building Contractors’

2011 Kelly Wong Chian Soon, ‘The Effects of Concrete Column Confined by Conventional Straps Compared to Innovative Straps Placed in a Multi-Layer

B. EDUCATION TECHNOLOGY

1995 Nor Razak b. Pathiroon, 'Ruang Pemeriksaan Bagi Sistem Pembentungan'

MASTER OF SCIENCE (CONSTRUCTION MANAGEMENT)

1999 Faridah bt Ismail, 'Obligasi Kontraktor di Bawah Kontrak Reka dan Bina bagi Projek Jambatan’

MASTER OF ENGINEERING (STRUCTURE)

11


2000 Choon Teck Kiang, ‘Comparison of Grillage and Finite Element Method in Bridge Deck Analysis’

2001 Nge Sew Boon, ‘Analysis of Steel Bridge Deck of Various Types Using Finite Element’

2002 NIL

2003 NIL

2004 NIL

2005 Lee Poh Huat, ‘Case Study to Determine the Camber of Post-Tensioned ‘I’ Beam’Abdul Kadir Ahyat ‘Analysis and Design of Hammerhead Bridge Pier Using a Strut and Tie Method’

2006 Khoo Hui Kiang, ‘Development of Creep and Shrinkage Prediction Model for Malaysian Normal Strength Concrete’

2007 Ng Ming Kwong,’The Strategy of Implementing EC 2 in Malaysia’

2008 Ng Peng Chew, ‘Evaluation of Creep and Shrinkage of Concrete’Azzuana bt Nasri, ‘Deflection of Cantilever Box-Girder Concrete Bridge’

2009 Zaid F. Abdul Abbas, ‘Structural Behaviour of Prestressed Pretensioned Concrete Composite Section’

2010 NIL

2011 Lee Hoong Pin Behavior of Externally Confined HSC Column Under Uniaxial Cyclic Compression

Welfred Chai Khai HungMotivations and Barriers to the Implementation of Green Building Policy in UTM

Song Yu MingBehaviour of Confined HSC Column Subjected to Concentric and Eccentric Loads

2012 Kelly Wong Chien SoonThe effectiveness of metal straps strengthening in layers of high strength concrete column

2013

10. SUPERVISION OF POST-GRADUATE RESEARCH STUDENT (M. Eng and Ph.D)

1999 Roslli bin Noor Mohamed – M. Eng (The study of flexural behaviour of light-weight prestressed concrete beam)- GRADUATED

Izian bt Abd Karim – M.Eng

12


(Performance of curved box girder bridge under low intensity earthquake effect)- GRADUATED

2000 Nor Fardzilah bt Abdul Rahman – M. Eng(The development of a new bridge deck system using locally produced structural steel section) – WITHDRAW FROM STUDY

2003 Tan Pui Lai – PhD(Creep and Shrinkage of High Strength Concrete) – GRADUATED

Roslina Omar – M. Eng(Creep and Shrinkage of Normal Strength Concrete)- GRADUATED

Abdullah Zawawi Awang – PhD(Confinement of High Strength Concrete Using Low-cost Steel Strap)-GRADUATED 2013

2006 Noridah binti Mohamad –PhD (Structural Development of Lightweight Foam Concrete Panel as an Industrialised Building System) – GRADUATED 2011

2007 Mohd Khairul Azman Hambali – M. Eng(Deflection of Cantilever Box-Girder Prestressed Concrete Bridge) – GRADUATED 2012

Reza Pashaei – Ph.D(Effective Parameters on Multi-Criteria Decision for Retrofitting Concrete Buildings)

Ahmadon Bakri – Ph.D (Co-supervisor)(Quantitative Risk Assessment in IBS Construction)

2011 Lee Hoong Pin – Ph.DExperimental and Analytical Investigation of Externally-Confined HSC Column

Ma Chau Khun- Ph.DFlexural Behavior of Confined HSC Members

11. EVALUATION WORK

1995 Evaluate the Syllibus of 'Structural Design'- A subject for Quantity Surveyor Course in the Department of Quantity Survey, Faculty of Built Environment, UTM

2000 Member of a Technical Committee of APSEC 2000, evaluating papers for presentation in the conference

Member of a Panel evaluating Masters (research) and PhD students (first evaluation of research proposal):

1999(1) Abdul Sani Abd Hadi- 'The Performance of a Prototype

Prestresses T-Beam Section For Bridges in Malaysia' (M.Eng)

13


(2) Ibrisam Akbar- 'Computer Analysis of the Performance of Prestressed T-Beam For Bridges' (M.Eng)

2000(1) Abdul Chalid- ‘Plastic Analysis and Ultimate Strength of

Reinforced Concrete Beams in Shear' (Ph.D)

(2) Norhisham Bakhary- 'Bridge Rating and Condition Assessment Considering Earthquake Effect Using Artificial Neural Network'

(M.Eng)

(3) Mazin Baqir Hammound Alwash- ‘Development of Global Bridge Monitoring System’. (Ph.D)

2001(1) Afzainizam Ibrahim- ‘Performance of Locally Produced 16 m

Prototype Standard Bridge Section’. (M.Eng)

(2) Nor Fardzilah Abdul Rahman- ‘Computer Model of Steel Bridge Deck Using Local Steel Section’. (M.Eng)

(3) Nazihah bt. Kamaruddin- ‘Load Models for Structural Safety Evaluation of Existing Road Bridges’

2000 Member of a Panel evaluating Masters Project (M.Eng- Engineering Management)

(1) Chan Yin Weng

(2) Chang Wei Lam

Internal Examiner for M. Eng/Ph.D theses:

2000(1) Nursidin – ‘Fatigue Behaviour of High Strength Concrete’

(M.Eng)

(2) Ang May Ling – ‘Quantitative Assessment of Deterioration of Effects in Concrete Bridge’ (M.Eng)

2001(1) Norhisham Bakhari – ‘Neural Network Technology in Condition

Assessment of Bridges with Consideration For Seismic Effect’ (M.Eng)

(2) Ahmed El-Tayeb – ‘Realistic Analysis and Design of Partially Prestressed Concrete Beams Using Non-Linear Approach’ (Ph.D)

(3) Sallehuddin Shah bin Ayop – ‘Pembangunan Sistem Perkadaran Bagi Tujuan Penilaian Keadaan Struktur Marine’ (M.Eng)

2007(1) Sophia C. Alih – ‘Structural Health Monitoring System Through

Non-destructive Testing With Application of Artificial Neural Network for Concrete Bridges’ (M.Eng)

14


External Examiner for M. Eng/Ph.D theses:

2006(1) Universiti Putra Malaysia- Non-Linear

Finite Element Modellingof Railway Track Supporting System – Yeat Chooi Fong

(2) Universiti Putra Malaysia- Structural Behaviour of Ferrocement-Autoclave Block Composite Slab – Saleh Yahya Saleh Laseima

2009(1) Universiti Tenaga Nasional - Parametric Study of Behavior of

Reinforced Concrete Beams with Web Openings – Sadaam H. Hussein

12. RESEARCH

1991-92: Project Leader: A Study on the Performance and Maintenance of Bridges in Peninsula Malaysia (Vot: 71233, RM20,000 UPP grant).Studies have been carried throughout Peninsula Malaysia. About 150 bridges were inspected and rated visually. Team members: Assoc. prof. Shahrin Mohammad and Dr. Mohd. Noor Mohd. Basir. One paper was presented in an International Conference and another paper presented in National Seminar. Research completed.

1999 Project Leader (from July 1999): A study on JKR new prestressed T-Beam bridge section. IRPA Grant (Vot: 72078, RM 240,000). A study on full-scale 18 m prestressed T-beams. Research completed.

Project Leader: The study on flexural behaviour of light-weight prestressed concrete beam. Vot: 71497, RM20,000 grant from RMC UTM. Research completed.

Project Leader: The study of shear behaviour of concrete beam with a weak concrete zone. Vot: 71521, RM20,000 grant from RMC UTM. Research Terminated.

2000 Project Leader: The design of a new bridge deck system using locally produced structural steel elements. IRPA Grant (Vot: 72264, RM164,350). Research Completed

Researcher: Load Models for the Structural Safety Evaluation of Existing Road Bridges. IRPA Grant (Vot: 72340, RM142,025). Research completed.

Researcher: Smart Remote Monitoring of Bridges. IRPA Grant (Vot: 72281). Research completed.

2002 Researcher: Analysis of Reinforced Concrete Columns Concealing Rain Water Pipe in Multi-Storey Buildings. Vot: 71749, RM20,000 grant RMC, UTM. Research Completed.

2003 - present Project Leader: Creep, Shrinkage and Elastic Modulus of Malaysian Concrete. CIDB Grant (Vot: 73300, RM630,500.00).

15


2004 - 2007 Project Leader: The Fundamental Study of Improving Ductility of Reinforced High-Strength Concrete (HSC) Members. Fundamental Grant UTM (Vot: 75136, RM48,000.00). Research Completed

2006 - 2009 Researcher: Quantitative Safety and Health Assessment Model for IBS Construction CIDB Grant (RM 246,600). Research completed 2011

2007 Project Leader: The Structural Development of Lightweight Foam Concrete Panel as an Industrialised Building System. Initial Research Grant Scheme for Student (IRGS), RMC, UTM (Vot: 78167, RM10,000). Research Completed

2011 Researcher: Towards a Sustainable Solid Waste Management of Plastic Bag in Malaysia (GUP: Vot 02J05)

13. PROFESSIONAL EXPERIENCES/CONSULTANCIES

At UTM:

1990 Design prestressed beams for Bandar Hilir Jetty.

1990-91 As a Civil Engineer in the Kemaman Breakwater Monitoring Team (UPUL Project).

1993-94 A member of bridge assessment team evaluating the capacity of 3 bridges for Majlis Perbandaran Melaka. The jobs including visual inspections, non-destructive testings, load testing and computer simulation of the deck. Investigating Team Leader: Assoc. Prof. Dr. Che Sobri Abdullah.

1994-95 Involved in the design of water reticulation for PKENJ Housing Project in Tebrau.

1994-95 Design Kim-Kim Bridge with Gabungan Jurubina Consultant Engineer for Technopark.

1995 Design 4 blocks 24 storey medium cost apartment with Zainal Abidin Jurutera Perunding for Larkin Perdana.

2000 Evaluate prestressed beams suspected of defects for Syarikat Kekuatan Sdn. Bhd. and prepare reports to JKR

Prepare report on recommendation of demolition work of prestressed parking slab in Johor Bahru for Tenaga Alam Bina (M) Sdn. Bhd.

2001 Design Adviser to AK Engineering Consultant to design 4 prestressed concrete bridges

2004-05 Project leader: Investigation of Structural Integrity and Design Check of MRR2. Appointed by Badan Pencegah Rasuah (BPR)

2005 Compilation of IBS Construction 1966- 2006 in Malaysia for CIDB

Identifying research works necessary for the adoption of new Eurocode (EC2)- Concrete Structure- project carried out with IKRAM and JKR

16


2006 Kerja Rekabentuk Struktur Jambatan Projek Lebuhraya Pantai Timur Fasa II, Pakej 7A Untuk Tetuan Zainal dan Mohamad

2008 – now Appointed as Director of Works, Office of Asset and Development, UTM – Superintendent Officer (SO) for the Construction of Development Projects under RMK 9/10 (24 projects with cost RM900 millions). Also handling Campus Facilities Management and Services

1993 Professional Training At PSC Freyssinet (Jan-April)- Assistant Projects Engineer.

Working in the design office for 3 weeks. Study construction drawings of Permas Jaya Bridge including all prestressing works and the details of travellers formwork. Also carried out prestress losses calculations of another ordinary bridge.

Working on site for 3 months (until 30/4/93). Project brief: construction of a 600m prestressed cantilever box girder bridge. The main work were supervising the preparation work of 40 m prestressed post-tensioned beams including prestressing operations and grouting. On the box-girder construction, works include supervising the placement of tendon ducts, anchorages and stressing operations.

1993 At Zainal Abidin Jurutera Perunding (May-December)-Engineer

(a) Involved in the design of 4 bridges in Segamat for JKR. Also prepare document for soil investigation, progress report to JKR, tender documents and costing.The bridges have been constructed.

(b) Design, prepare tender document and costing for the replacement of a timber deck with concrete deck of a bridge in Taman Dawani for Majlis Daerah Kulai.

(c) Prepare a proposal of privatisation development in Tangkak for Mahar Tegoh Sdn Bhd.

(d) Prepare tender document, costing, evaluate tender and attend site meeting of the construction of Jalan Lengkongan for Majlis Daerah Kulai.

(e) Design and supervise the construction of steel structures for the renovation works of Kulai branch Maybank office.

(f) Involved in the investigation of structural integrity of Flat Bukit Chagar, and prepare a report to Johor State Government.

(g) Design the internal plumbing for Dataran Bandaraya Johor Bahru.

14. PUBLICATIONS

Journal

17


(1) Wahid Omar, 'Penilaian Jambatan Konkrit (Assessment of Concrete Bridges)'- Jurnal Kejuruteraan Awam (UTM) Jld. 5, Bil. 1 Jan 1991

(2) Faridah Shafie, Wahid Omar, Shahrin Mohamad and Ahmad Mahir Makhtar, ‘Standardisation of Structural Design- A Shift form British Standards to Eurocodes’. Jurnal Teknologi (Construction, Design and Planning), Bil.34, Jun 2001, Penerbit Universiti Teknologi Malaysia

(3) Omar, W., and Clark, L.A., ‘Shear Capacity of Honeycombed Reinforced Concrete Beams’, The Structural Engineer, Journal of the Institution of Structural Engineers, UK, Vol. 79, No. 15, 7 August 2001, pp 17-22.

(4) Wahid Omar, Zaiton Haron and Zainab Arman Ali, ‘BS 8110 Replaced by EC2: Are We Ready For It?’ Jurutera, The Bulletin of The Institution of Engineers, Malaysia, Bil. 10, Oktober 2001, pp.30-42.

(5) Jahangir Bakhteri, Wahid Omar, Ahmad Mahir Makhtar, ‘A Critical Review of the Reinforced Concrete Columns and Walls Concealing Rain Water Pipe in Multistorey Buildings, Journal of Civil Engineering, Universiti Teknologi Malaysia, Vol.14, No.2, 2002 pp 39-52

(6) Wahid Omar and Roslli Noor Mohamed, ‘The Performance of Pretensioned Prestressed Concrete Beams Made With Lightweight Concrete’, Journal of Civil Engineering, Universiti Teknologi Malaysia, Vol.14, No.1, 2002 pp 60-70

(7) Wahid Omar, ‘Updates on Eurocode 2 and Preparing for the Implementation in Malaysia’, Jurutera, The Bulletin of The Institution of Engineers, Malaysia, October 2006, pp 34-41

(8) Wahid Omar, ‘Structural Concrete Design: Should BS 8110 Be Replaced by Eurocode 2? The Ingenieur, Magazine Board of Engineers Malaysia, Vol. 31, Sept- Nov 2006, pp 6-10

(8) Wahid Omar and Clark, L.A., ‘Plastic Analysis of Shear Capacity of Concrete Beams With a Honeycombed Concrete Region’ Journal of the Institution of Engineers Malaysia, Vol.64 No.3 September 2003 pp 27-34.

(9) Wahid Omar, Tan Pui Lai, Lee Poh Huat, Roslina Omar, ‘Improved Prediction of Precamber of Post-tensioned Prestressed I – Beam’, Journal Institution of Engineers Malaysia, Vol. 69, No.1, March 2008.

(10) Noridah Mohamad, Wahid Omar, Redzuan Abdullah, ‘Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) Tested Under Axial Load: Preliminary Results’, Journal of Advanced Materials Research Vols. 250-253 (2011) pp 1153-1162

(11) Zaiton Haron, Hamidun Mohd Noh, Khairulzan Yahya, Wahid Omar, Zaimi Abd Majid, ‘Assessing Noise Emission Levels From Earthwork Construction Equipment’, Malaysian Journal of Civil Engineering, Vol. 24, No.1, 2012, pp 13-28

(12) Irina Safitri Zen, Rahmalan Ahamad, Wahid Omar, ‘No plastic bag campaign day in Malaysia and the policy implication’, Environment, Development and Sustainability, Springer, Jan 2013

(13)18


Conference, Seminar, Proceedings

(1) Shahrin Mohammad and Wahid Omar, 'A Review on Prestressed Concrete Practices in Malaysia'- The International Conference on Concrete Technology (CONCET 91), Kuala Lumpur, October 1991.

(2) Wahid Omar, 'Bridge Deteriorations- The Effects on Structural Integrity and Capacity'- Special Academic Discourse, Faculty of Civil Engineering, UTM, 1991.

(3) Wahid Omar, Shahrin Mohammad and Mohd. Noor Mohd. Basir, 'Condition Survey on Bridge Structures in Malaysia'- Asia Pasific Structural and Construction Engineering Conference (APSEC), UTM, September 1992.

(4) Omar, W and Clark, L.A., 'The Effect of Honeycombing on the Shear Assessment of Reinforced Concrete Beams'- Proceedings of the Seventh International Conference on Structural Faults and Repair, Edinburgh, 1997.

(5) Omar, W., and Clark, L.A., 'The Effect of Honeycombing on Shear Capacity of Beam'- The Sixth International Conference on Concrete Engineering and Technology (CONCET 99), Kuala Lumpur, 1999.

(6) Wahid Omar and A. Aziz Saim, 'An Introduction to Bridge Engineering'- Seminar Kejuruteraan Awam, Ayer Keroh, Melaka, 1999.

(7) Tahir, M.M., Mirasa, A.K., Omar, W., Anderson, D., 'A Prediction Equation For Initial Stiffness For Flush End-plate Joints Connected to a Column Web', 6th. International Conference on Steel and Space Structures, Singapore, 1999.

(8) Wahid Omar, Mohd.Noor Mohd. Basir, ‘Struktur Jambatan di Malaysia –Kajian Prestasi’, Seminar Kejuruteraan Awam, UTM, Ogos 1999.

(9) Wahid Omar, Abd Latif Saleh, ‘Kajian Analitikal Keupayaan Sambungan Pembinaan Yang Terbentuk Tanpa Kawalan’, Persidangan Kebangsaan Kejuruteraan Awam, Universiti Sains Malaysia, (AWAM ’99), Lumut, 2000.

(10) Abd. Latif Saleh, Wahid Omar, ‘Penggunaan Kaedah Duaan Unsur Sempadan Dalam Analisis Penjalaran Retak Pada Konkrit’, Persidangan Kebangsaan Kejuruteraan Awam, Universiti Sains Malaysia, (AWAM ’99), Lumut, 2000.

(11) Abd. Karim Mirasa, Mohd. Hanim Osman, Wahid Omar, Ibrisam Akbar, ‘Analisis Unsur Terhingga Linear Rasuk Prototaip Konkrit Prategasan Prategang Keratan ‘T’ Untuk Jambatan Piawaian Baru JKR Malaysia’, Persidangan Kebangsaan Kejuruteraan Awam, Universiti Sains Malaysia, (AWAM ’99), Lumut, 2000.

(12) Omar, W, Clark, L.A., ‘Upper-Bound Plastic Analysis For Shear Evaluation of Honeycombed Beams’, Proceedings, The 4th Asia Pasific Structural and Construction Engineering Conference (APSEC 2000), UTM, Kuala Lumpur, September 2000.

(13) M. Ismail, N. Yahaya, A.M.Makhtar, W.Omar, ‘Effect of Electrochemical Chloride Extraction Treatment on Physical and Microstructural Properties of Blended Cement’, Proceedings, The 4th Asia Pasific Structural and Construction Engineering Conference (APSEC 2000), UTM, Kuala Lumpur, September 2000.

19


(14) Wahid Omar, Roslli Noor Mohamed, ‘Properties of Lightweight Concrete Using Palm Oil Clinker in Prestressed Concrete Beam’, Proceeding of the Seventh International Conference on Concrete Engineering and Technology (CONCET 2001), Shah Alam, June 2001.

(15) Wahid Omar, Shahrin Mohammad, A.Aziz Saim, Yusof Ahmad and Norfardzilah Abdul Rahman, ‘Computer Modelling of Composite Bridge Deck Constructed Using Locally Produced Steel Sections’, Proceedings of the First International Conference on Steel and Composite Structures (ICSCS’01), Pusan, Korea, June 2001.

(16) Wahid Omar, Roslli Noor Mohamed, ‘The Performance of Pretensioned Prestressed Lightweight Concrete Beam’, Research Seminar on Construction, Faculty of Civil Engineering, UTM, September 2001.

(17) Mohd. Noor Mohd. Basir, Wahid Omar, ‘Application of Fracture Mechanics to Fillet Welded Steel Connections’, Research Seminar on Construction, Faculty of Civil Engineering, UTM, September 2001.

(18) Azlan Adnan, Wahid Omar, Izian Abd. Karim, ‘Seismic Response of Box Girder Bridges’, Research Seminar on Construction, Faculty of Civil Engineering, UTM, September 2001.

(19) Wahid Omar, Mohd. Salleh Yasin, Zainab Arman Ali and Zaiton Haron, ‘BS 8110 Withdrawn by 2006: The Impact on Malaysia Construction Practice’, Persidangan Kebangsaan Industri Pembinaan, Jabatan Ukur Bahan, Universiti Teknologi Malaysia, 29-31 October 2001.

(20) Wahid Omar, Roslli Noor Mohamed, ‘Behaviour of Pretensioned Prestressed Lightweight Concrete Beams’, The Proceedings of the Second World Engineering Congress (WEC), Kuching, Sarawak, 22-25 July 2002.

(21) Wahid Omar, Shahrin Mohammad, Yusuf Ahmad, Nor Fardzilah Abdul Rahman, ‘Performance of Steel Bridge Deck With Additional Steel Plate At the Bottom Flange’, The Proceedings of the Second World Engineering Congress (WEC), Kuching, Sarawak, 22-25 July 2002.

(22) Azlan Adnan, Wahid Omar, Izian Abd. Karim, ‘Linear Analysis of Box Girder Bridges Under Low Intensity Earthquake’, The Proceedings of the Second World Engineering Congress (WEC), Kuching, Sarawak, 22-25 July 2002.

(23) Azlan Adnan, Wahid Omar, Izian Abd. Karim, ‘Seismic Response of a Light Rail Transit (LRT) Box Grider Bridges’, The Proceedings of the Structural Engineers World Congress 2002 (SEWC2002), Yokohama, Japan, October 2002.

(24) Mohd Hanim Osman, Abdul Karim Mirasa, Wahid Omar, Abul Sani Abdul Hadi, ‘Performance Evaluation of JKR Prestressed T-Beam’, Proceedings of 3 rd

International Conferences on New Dimensions in Bridges, Kuala Lumpur, April 2003.

(25) M.C.Hee, Wahid Omar, Jeffrey Chiang, ‘A Study on Concrete Codes of Practice Adoption in Malaysia After 2008’, Proceedings Asian Concrete Forum, Indian Concrete Institute, Pune, India, 18 September 2003

20


(26) Wahid Omar and Tan Pui Lai, ‘Concrete Creep and Shrinkage in Malaysia’, Up date on current research, American Concrete Institute (KL Chapter) Newsletter No.2, February 2004

(27) Wahid Omar and Tan Pui Lai, ‘Shear Design of Reinforced Concrete Beam: Comparison Between EC2, BS8110 and ACI-318’, Proceedings of the 8th

International Conference on Concrete Engineering and Technology (CONCET 04), Kuala Lumpur, 19-21 April 2004

(28) Wahid Omar, Tan Pui Lai, Roslina Omar,’The Estimation of Time-Dependent Deformation in Concrete: How Relevant Are the Standard Codes Recommendations to Malaysian Environment?’, CIDB Seminar on R&D Achievement (CIRAS) 2004, International Construction Week, September 22, 2004 Kuala Lumpur.

(29) Roslina Omar, Tan Pui Lai, Wahid Omar,’The Study on Size Effect of Creep and Shrinkage Deformation of Normal Weight Concrete’, Seminar Penyelidikan Kejuruteraan Awam 2004, Faculty of Civil Engineering, UTM, 1-2 September 2004.

(30) Wahid Omar, Tan Pui Lai, Roslina Omar, ’ Shifting to Eurocodes: Developing The Nationally Determined Parameters on Concrete Time-Dependent Deformation’, Proceedings of The First International Conference of Asian Concrete Federation, Chiang Mai, Thailand, 28-29 October 2004.

(31) Wahid Omar, Othman Che Puan, Ahmad Baharuddin Abd. Rahman, Mohamad Ibrahim Mohamad, ’Postgraduate Education In the Faculty of Civil Engineering: The Past Experience, Managing the Present and Preparing For the Future Challenges’, Conference on Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

(32) Shahrin Mohamad, Hasanan Md. Nor, Danial Mohamed, Wahid Omar, ‘Enhancing Teaching and Learning Through the Incorporation of Generic Skills for Civil Engineering Undergraduates’, Conference on Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

(33) Wahid Omar, Lee Poh Huat, Tan Pui Lai, Roslina Omar, ‘Pre-camber in Post-Tensioned I-Beam: Comparison Between Site and Prediction Values’, Proceedings Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), Faculty of Civil Engineering, UTM, 5-6 July 2005.

(34) Wahid Omar, Abdullah Zawawi, K.Pilakoutas, ‘Improving the Ductility of High-Strength Concrete Using Steel Strap Confinement’, Proceedings Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), Faculty of Civil Engineering, UTM, 5-6 July 2005.

(35) Wahid Omar, Tan Pui Lai, Roslina Omar, ’A Study on Creep and Shrinkage Deformation of Malaysian Concrete’, International Concrete Convention, National Ready-Mixed Concrete Association, Malaysia, Awana Genting, 18-19 April 2006. (Invited paper)

(36) Wahid Omar, Tan Pui Lai, Roslina Omar, ‘Eurocode 2 vs BS 8110: Some Issues Concerning Concrete Properties and the Effect on Design, Proceedings, 9 th

International Conference on Concrete Engineering and Technology 2006 (CONCET 2006), 9-11 May 2006, Kuala Lumpur.

(37) Ahmad Baharuddin Abd. Rahman, Wahid Omar,’Issues and Challenges in the Implementation of Industrialised Building System in Malaysia’, Proceedings, 6 th

21


Asia Pacific Structural Engineering and Construction Conference 2006 (APSEC 2006), 5- 6 September 2006, Kuala Lumpur.

(38) Wahid Omar, Tan Pui Lai, Khoo Hui Kiang, Roslina Omar,’ Development of Creep and Shrinkage Prediction for Malaysian Concrete’, 2nd Asian Concrete Federation Conference, 20-21 November 2006, Bali, Indonesia.

(39) Wahid Omar, Kypros Pilakoutas, Abdullah Zawawi Awang, ’Preliminary Experimental Investigation on the Performance of Laterally Confined High-Strength Concrete Columns Using Steel Straps’, 2nd Asian Concrete Federation Conference, 20-21 November 2006, Bali.

(40) Wahid Omar, Shahrin Mohammad, Mohammad Ismail, Tan Pui Lai, ’Development of Local Design Values in Structural Concrete Design’, Construction Industry Research Achievement International Conference (CIRAIC 2007), CIDB, 13-14 March 2007, Kuala Lumpur.

(41) Wahid Omar, Kypros Pilakoutas, Abdullah Zawawi Awang, ‘Innovation in the Improvement of Ductility of High Strength Concrete Column’ International Concrete Convention, National Ready-Mixed Concrete Association, Malaysia, Awana Genting, 20-21 April 2008. (Invited paper)

(42) Noridah Mohamad, Wahid Omar, Redzuan Abdullah, Lee Yee Loon, Abdul Aziz Abdul Samad, ‘Precast Sandwich Penal As an Industrial Building System: An Overview’, International Seminar on Civil and Infrastructure Engineering, Shah Alam, 11-12 June 2008

(43) Noridah Mohamad, Wahid Omar, Redzuan Abdullah, Lee Yee Loon, Abdul Aziz Abdul Samad, ‘Axially loaded precast foamed concrete sandwich panel’. The Eleventh East Asia-Pacific Conference on Structural Engineering and Construction, EASEC-11.Taipei , Taiwan. 19-21 November 08

(44) Noridah Mohamad, Wahid Omar, Redzuan Abdullah, W.I Goh, ‘An Experimental Study of Load Carrying Capacity of Precast Lightweight Foamed Concrete Sandwich Panel Under Axial Load’, 11th International Conference on Concrete Engineering and Technology,CONCET 2102, Putrajaya, 12 – 13 June 2012.

(45) Wahid Omar, Aminah Md Yusof, Asliza Abu Bakar, Abdol Fatah Abu Bakar, ‘Managing UTM 9th Malaysia Plan Development Projects: Issues and Challenges’, Asia Pacific Structural Engineering Conference, 2-4 October 2012, Surabaya, Indonesia – Keynote Paper

(46) Abdullah Zawawi Awang, Wahid Omar, Hoong-Pin Lee and Chau-Khun Ma, “Behaviour of Externally-Confined High-Strength Concrete Column under Uniaxial Compression Load”, ISBN 978-983-44826, The 8th Asia Pacific Structural Engineering & Construction Conference (APSEC 2012) and The 1st International Conference of Civil Engineering Research (ICCER 2012), 2nd – 4th October 2012, Surabaya, Indonesia. – accepted for further review in Journal Technology (Indexed Journal)

(47) Abdullah Zawawi Awang, Wahid Omar and Hoong-Pin Lee, “The Effectiveness of Metal Straps Strengthening in Layers at High-Strength Concrete Column”, ISBN 978-983-44826, The 8th Asia Pacific Structural Engineering & Construction Conference (APSEC 2012) and The 1st International Conference of Civil

22


Engineering Research (ICCER 2012), 2nd – 4th October 2012, Surabaya, Indonesia

Books, Documents

(1) Industrialised Building Systems in Malaysia, a documentary on IBS, compiled and written by Ahmad Baharuddin Abd. Rahman and Wahid Omar, published by the Construction Industry Development Board, December 2006. ISBN 983-2724-50-3

(2) Mohd Afizan Alang, Wahid Omar,’3 Dekad Pembangunan Kampus UTM’, 2010 Penerbit UTM Press

(3) Wahid Omar, Rosli Mohamad Zin, ‘Construction Industry Standard: Design Guide on Precast Concrete Hollow Core Slab, CIS 8:2007’ Construction Industry Development Board 2007. ISBN 978-983-2724-54-4

15. THESES

(1) Omar, W., 'Bridge Assessment'- MSc. Dissertation, University of Surrey, 1989.

(2) Omar, W., 'The Shear Assessment of Concrete Beams With a Honeycombed Zone Present in the High Shear Region'- Ph.D Thesis, University of Birmingham, 1998.

16 TECHNICAL COMMITTEE/REFEREE/ADVISORY

(1) Technical Committee, The 4th Asia Pacific Structural Engineering and Construction Conference, Kuala Lumpur, 2000.

(2) Technical Committee, the VII International Seminar on Structural Masonry for Developing Countries, September 2002, Brazil.

(3) Technical Committee, the Second World Engineering Congress (WEC), Kuching, Sarawak, July 2002.

(4) International Advisory Committee, the 9th East Asia-Pacific Conference on Structural Engineering and Construction, Bali, Indonesia, 16-18 December 2003.

(5) International Scientific Committee, the 18th Australasian Conference on Mechanics of Structures and Materials, Perth, 1-3 December 2004. (Review 3 papers)

(6) Guest, Working Commission on Concrete (WC3), International Association of Bridge and Structural Engineering (IABSE)

(7) Review article for IEM Journal (4 articles)

(8) Review article for Journal Teknologi B, UTM (2 articles)

(9) Review article for KUiTTHO Journal

(10) As a referee for Ir. Dr. Abdul Khalim Abdul Rashid (Universiti Kebangsaan Malaysia) for promotion to Associate Professor

23


(11) Referee in Regional Bridge Model Competition organised by UTM 2003 (first level)

(12) Review article for Malaysian Construction Research Journal, CIDB ( 1 article)

(13) Editorial Committee, Malaysian Journal of Civil Engineering, Faculty of Civil Engineering, UTM, Until July 2009 (since 2004)

(14) Representing Malaysia to 12th Plenary Meeting of ISO/TC 71- Concrete, Reinforced Concrete and Prestressed Concrete, 20-22 September 2004, Istanbul, Turkey.

(15) Member of Evaluation Penal Civil Engineering Program, Universiti Teknologi MARA (UiTM). Appointed by Engineering Accreditation Board, Board of Engineers, Malaysia. Visits and reports prepared in December 2004 (UiTM Pulau Pinang) and January 2005 (UiTM Shah Alam).

(16) Technical Expert Penal Evaluating IGS for R & D on ‘Research of Local Timber Strength (Engineer Calculation Stress Grade Timber) for Prefabricated Method of Modern Timber Frame Construction Form’ . Appointment by MOSTI.

(17) Representing the Institution of Engineers, Malaysia (IEM) to the first Asian Concrete Forum (ACF) meeting in Chieng Mai, Thailand, 28-29 October 2004

(18) Member, International Committee on Concrete Model Code for Asia (ICCMC) – since November 2005

(19) Member, International Scientific Committee, 2nd ACF International Conference, 20-21 November 2006, Bali, Indonesia.

(20) Member of Evaluation Penal of B.Eng Civil and Construction Engineering Program, Curtin University of Technology, Sarawak Campus, Miri, Sarawak. Appointed by Engineering Accreditation Council, Board of Engineers, Malaysia. Visits and reports prepared on 7 and 8 March 2006.

(21) Member of Technical Committee for Evaluation of Applications of Sciencefund (Research Proposals under Industrial Cluster). Appointed by Malaysian Technology Development Corporation (MTDC), MOSTI. Meeting and evaluation process 22-23 August 2006 in Kuala Lumpur.

(22) Member of Technical Evaluation Penal, Technofund RMK9, Research Management Centre, UTM, 19 September 2006.

(23) Country Representative (Interim), Asian Concrete Federation (ACF) Executive Council Meeting, Bali, Indonesia, 22 November 2006.

(24) Evaluation Penal Member, Fundamental research grant, Research Management Centre, UTM, 2007

(25) Review articles for Malaysian Journal of Civil Engineering, UTM

I. Ductility of High Performance Concrete Beams Using Sandstone Aggregates (June 2007)

II. Automatic Mapping of Concrete Strength in Structural Element (May 2007)

III. Polymer-modified concrete as seismic strengthening system for existing buildings in Pakistan (Dec 2007)

24


(26) Evaluation Penal, Monitoring of FRGS project progress (4 projects), UTM, June 2007 and December 2007

(27) Chairman, Penal of Judges, National Bridge Model Competition (Secondary School Category), UTM, August 2007.

(28) As a referee for Dr. Mohamed Abdul Kader El-Gelany, contract staff of Faculty of Civil Eng. (Universiti Teknologi Malaysia) for promotion to Associate Professor (DS54)

(29) International Scientific Committee, the 20th Australasian Conference on Mechanics of Structures and Materials (ACMSM20), Queensland, 2-5 December 2008.

(30) Member of Evaluation Penal Civil Engineering Program, Universiti Putra Malaysia (UPM). Appointed by Engineering Accreditation Board, Board of Engineers, Malaysia. Visits and reports prepared in July 2008.

(31) Member of Evaluation Penal Civil Engineering Program, Universiti Teknologi MARA (UiTM). Appointed by Engineering Accreditation Board, Board of Engineers, Malaysia. Visits and reports prepared in August 2008.

(32) Chairman of Evaluation Penal Civil Engineering Program, Universiti Teknologi MARA (UiTM). Appointed by Engineering Accreditation Board, Board of Engineers, Malaysia. Continuing Accreditation Visits and reports prepared in June 2010.

(33) Chairman of Evaluation Penal Civil Engineering Program, Universiti Putra Malaysia (UPM). Appointed by Engineering Accreditation Board, Board of Engineers, Malaysia. Continuing Accreditation Visits and reports prepared in January 2011.

(34)

17. PROFESSIONAL COURSES/TALK/PRESENTATION DELIVERED

(1) ‘Design of Prestressed Concrete’, Profesional Development Seminar, Organised by Dept. of Structures and Materials, FKA, UTM, Kuantan, Pahang, 15 Nov. 2000.

(2) ‘BS 8110 Replaced by EC2, Are We Ready?’, A forum on Eurocodes Jointly organised by Institution of Engineers, Malaysia (IEM) and Dept. of Structures and Materials, FKA, UTM; Petaling Jaya, 25 Nov. 2000.

(3) ‘Halatuju Penyelidikan Jabatan Struktur dan Bahan’, Presented at Research and Post-graduate Workshop, Faculty of Civil Engineering, Melaka, 22-24 Januari, 2001.

(4) ‘Eurocode 2 and BS 8110- A Comparison’, Seminar on Concrete Code of Practice After 2006, Monash University Malaysia, Kuala Lumpur, 1 Disember, 2001.

(5) Career Talk, ‘Challenges Ahead’, Career talk PEKA (Civil Engineering Society, UTM), 3 August, 2002.

(6) Academic Discourse of Department of Structures and Materials ‘What Do We Owe Our Students’, January 2003

25


(7) ‘Introduction to Bridges’ A short course for Anti-Corruption Officers, Johor Bahru, June 2003

(8) ‘Precast Concrete Design Training’, 2 day course on Precast Concrete conducted during Industrialised Building System Road Show 2003, organised by CIDB. Conducted 3 times in KL, Melaka and Penang respectively.

(9) ‘Postgraduate Programme in FKA – the Challenges Ahead’, Postgraduate Programme Workshop, Faculty of Civil Engineering, 24 – 25 May 2004.

(10)‘Precast Concrete Design Training’, 2 day course on Precast Concrete conducted during Industrialised Building System Road Show 2005, in Kuala Terengganu, 23-24 Februaty, 2005, Kota Kinabalu, Sabah, 20-21 July 2005, Kuching, Sarawak 27-28 September 2005, organised by CIDB.

(11)Workshop No. 2 ‘Creep, Shrinkage and Elastic Modulus Data of Malaysian Concrete’, 10 March 2005, Armada Hotel, Kuala Lumpur. Organised by CIDB and presentation of research progress to industry – Attended by Concrete and Cement Assoc., National Ready Mix Concrete Assoc, Concrete Society, IEM, CIDB, NUS (Dr. Tam Chat Tim), Dr. Kribanandan and individual experts in cement and concrete.

(12)Technical talk and discussion on concrete creep and shrinkage research, American Concrete Institute (KL Chapter), 15 July 2005, Kuala Lumpur.

(13)‘Tips on research and research examination: Expectations of supervisor’, Talk organised by Civil Engineering Postgraduate Students Society,15 September 2005.

(14)Precast Concrete Course to Putrajaya Holdings, 14-15 November 2005, Putrajaya. Organised by CIDB

(15)Precast Concrete Course to Cawangan Kerja Pendidikan, JKR, 22-23 November 2005, Grand Season Hotel, Kuala Lumpur

(16)‘Post-Graduate Study Opportunities at UTM’, Seminar Kejuruteraan Awam (SEMKA), Faculty of Civil Engineering, UTM, May 29 2006, Melaka.

(17)Professional Development Program, ‘Concrete Bridge Design’, Organised by SPACE, UTM, 20-21 June 2006, Kuala Lumpur

(18)Short Course on Precast Concrete Technology, Organised by IEM (Southern Branch) and CIDB, 23-24 June 2006, Johor Bahru

(19)Bridge Design Course for Jabatan Kerjaraya Negeri Sabah, Kota Kinabalu, 18-22 September 2006

(20)Precast Concrete Technology Workshop, Parallel Session in Conjunction with Malaysia International IBS Exhibition (MIIE 2006), Kuala Lumpur, 24 November 2006.

(21)Short Course ‘Precast Concrete Technology’, Organised by IEM Terengganu and CIDB, 28 January 2007, Kuala Terengganu.

(22)Short Course ‘Precast Concrete Technology’, Organised by CIDB and Politeknik Port Dickson, 20-21 April 2007, Port Dickson.

26


(23)Speaker for IBS Training Module: Analysis and Design of Precast Concrete Structures, Organised by Innovacia (a company appointed by CIDB). 16 May 2007, 18 July 2007, 21 November Kuala Lumpur.

(24)‘Introduction to Eurocodes’ – Introductory course on EC 2 to JKR Engineers, JKR HQ, 23-25 July 2007. Appointed by IKRAM Training and Infrasructure Development Institute.

(25)Bridge Design Course for Jabatan Kerjaraya Negeri Sabah, Kota Kinabalu, 6-10 July 2007

(26)‘Site monitoring of pre-camber in pre-stressed concrete bridge’, One-day UTM-JKR Bridge Seminar, Organised by SPACE UTM in conjunction with National Bridge Model Competition 2007, Dewan Jumaah UTM Skudai, 28 August 2007.

(27)Speaker for IBS Training Module: Analysis and Design of Precast Concrete Structures, Organised by Innovacia (a company appointed by CIDB).

(28)IBS Course – IMREC/IRDA Jan, Feb 2010

(29)UTM – Sustainable Campus – Presentation made to Summer Course Participants, FKKKSA (Denmark University), UTM. 7 June 2010.

(30)Conducive Campus Ecosystem-The Challenging Roles of the Office of Asset and Development, Seminar Pembangunan dan Pengurusan Fasiliti Kampus Pendidikan, 13-15 Oktober 2010, Kuala Lumpur. UKM and MPPIPTA

(31)Conducive and Sustainable Campus-The Only Way Forward, Action Plan Workshop, UTM Chancellery, 17 Feb 2011, Melaka.

(32)‘Sustainable Campus’, a module for Induction Course, UTM’s new staff course, Jun 2011.

(33)Greening Technical Operations and Accelerating Your Progress Towards Sustainability, Facilities Management Asia Summit 2011, Marcus Evans, 4-6 July, 2011, Macau, China.

(34)Lessons Learned on How to Implement a Successful Energy Management, ASEAN Energy Management Scheme (AEMAS) Conference, Kuala Lumpur, 19 July 2011.

(35)Pengurusan Fasiliti dan Penyenggaraan: Harapan dan Cabaran, Jabatan Pembangunan dan Pengurusan Fasiliti, Universiti Sains Islam Malaysia, 25 September 2011, Glory Beach Resort Port Dickson.

(36)Global UTM 2020, New Academic, Critical Success Factor, Bengkel Pemahaman, Penghayatan dan Perlaksanaan Perutusan Naib Canselor 2012, Pejabat Canseleri, Melaka

(37)Facilitator ‘Bengkel Transformasi Pengurusan Projek Pembangunan’, Kementerian Pengajian Tinggi, AKEPT, 15 March 2012

(38)Global UTM 2020, Kursus Induksi Staf 2011, 2012

(39)Mindset and Cultural Shift Towards Sustainable Energy Management System (SEMS), Seminar ‘Practicing What it Preaches – UTM one year Transformation to a Sustainable Energy Management Organisation’, UTM Kuala Lumpur

27


(40)‘UTM Action Plan 2013-2020, and Realising the Plan’, A workshop for UTM Chancelery Office, 14 February 2013.

(41)‘Managing RM 1 Billion UTM Development Projects, Civil Engineering Seminar, Faculty of Civil Engineering, UTM, Johor bahru, 3 March 2013.

18. TRANSLATION WORK

(1) Wahid Omar dan Abdullah Zawawi Awang, 'Rekabentuk Konkrit Prategasan', translated version of Prestressed Concrete Design, M.K.Hurst. Published by UTM and Renong, 1997.

19. REPORTS

(1) Kajian Prestasi dan Penyelenggaraan Jambatan di Semenanjung Malaysia. Final report submitted to Research Management Centre, UTM, 1999.

(2) The Assessment of Structural Integrity on Jambatan Hang Tuah. Report submitted to Majlis Perbandaran Melaka, 1994.

(3) The Assessment of Structural Integrity on Jambatan Tan Kim Seng Report submitted to Majlis Perbandaran Melaka, 1994.

(4) The Assessment of Structural Integrity on Jambatan Chan Koon Cheng. Report submitted to Majlis Perbandaran Melaka, 1994.

(5) Laporan Kekukuhan Struktur Flat Bukit Chagar, Johor Bahru- Akibat Tangki Air Pecah- A Report prepared for Zainal Abidin Jurutera Perunding and submitted to the Johor State Government, 1993, (during attachment at ZAJP).

(6) Proposal For the Development of a Commercial Centre in Tangkak Town- A Privatisation Project by Mahar Tegoh Sdn. Bhd.- A report prepared for Zainal Abidin Jurutera Perunding and submitted to the Johor State Government, 1993, (during attachment at ZAJP)

(7) MRR2 Forensic Engineering Investigation for BPR Malaysia, 2005, BIP, UTM.

(8) Wahid Omar et al, ‘Development and Performance Evaluation of Standard T-Section Bridge Beam for Malaysia’, Final Report to Research Management Centre, UTM, September 2002.

(9) Wahid Omar et al, ‘The Performance of Prestressed Lightweight Concrete Beams Using Palm Oil Clinker’, Final Report to Research Management Centre, UTM, September 2002.

(10)Abdullah Zawawi Awang, Wahid Omar and Hoong-Pin Lee, “Experimental Technique of Enhancement the Ductility of High-Strength Concrete”, Final report submitted to Research Management Center, RMC, UTM, 2012

20. COURSES/WORKSHOPS/SEMINARS ATTENDED

1986 Kursus Pengajaran Pensyarah- UTM1987 Finite Element Analysis- ITM

28


1990 Design Method- Embankments and Retaining Walls- an Improvised Approach - UTM.

1991 Management of Bridges- UM

1992 Bridge Design For Civil Engineer- Institut Kerjaraya Malaysia, Bangi.Course on QSE software,UTM

1994 Insitu Assessment and Repair of Concrete Structures, UTMA Comparison of Bridge Deck Analysis Techniques, IEMReinforced Concrete Structures-Plasticity Theory, UTM

1995 Earthquake Engineering, UTM

1999 Strategic Planning in Higher Education, UKM, Commonwealth Higher Education Management Services and Stamford College, Hilton PJ.Effective Supervision and Thesis Examination, Pusat Pengajian Siswazah, UTM.

2000 Curriculum Planning and Design, UTMWorkshop on the Effective Management of Meeting, AM Excell Training, Langkawi.Creative Problem Solving and Innovative Thinking, BATC, UTM, Effective Management, BATC, UTM.Workshop on Postgraduate Supervision, UTM.Prestressed Concrete Bridges (Box-girder)-Design and Construction-UMKursus Peningkatan Kualiti Kerja, UTM.Short Course on Pre-Stressed Concrete Bridges- Design and Construction, UM.Short Course on Pre-Stressed Flat Slab, UM.Bengkel Kecemerlangan Pelajar Bumiputera, Biro Tatanegara.

2002 7 habits of highly effective people.National Workshop For R&D Managers, 2002, MOSTEWorkshop on ‘Creating a World Class Team’ by Dr. Greg Barcelon, UTMWorkshop on ‘Teaching Portfolio’, UTMSeminar on Design and Construction of Prestressed Concrete Cable Stayed Bridges, JRK, REAM, JICA, Kuala Lumpur

2003 Workshop on developing Teaching Portfolio (UTM)Bengkel Kaedah Penyeliaan dan Penilaian Tesis Engineering Doctorate (UTM)

2004 Engineering Accreditation Council Evaluators’ Workshop, The Institution of Engineers, Malaysia, Kelana Jaya, 27 March 2004Penilaian Tahap Kecekapan DS54 (PTK6), UTM, 12-28 April 2004, UTMKursus Penyeliaan dan Penilaian Pengajian Siswazah, 9-10 August, UTMKursus Pembelajaran Dewasa (Adult Learning), 6 Disember 2004, UTM

2005 Workshop on Quality Assurance for Graduate Study in FKA, 13-15 June 2005, UTMBengkel Panel Penilai Akreditasi Program Kejuruteraan, Majlis Akreditasi Kejuruteraan, 18 –19 November 2005, Kuala LumpurWorkshop ‘Publication in journal: Article writing and review’, organised by Publication Committee, FKA, 7 December 2005.Bengkel Penentuan Bidang Fokus ‘Foresight Star’, Research Management Centre, UTM, 16-18 December 2005, Kuantan, Pahang.

29


2006 Bengkel Islam Hadhari: ‘Menggilap Kecemerlangan Pelajar Islam Dalam Bidang Kejuruteraan di IPTA’, UTM, 16 Januari 2006.Bengkel Peraturan Akademik Pengajian Siswazah UTM, 31 March-2 April 2006Workshop on Aligning R & D Priority Area to Construction Industry Master Plan (CIMP 2006-2015), Construction Industry Development Board (CIDB), Port Dickson, 26-28 May 2006Muzakarah FKA 2006 (Team-building program), Morib, 17-19 June 2006Globalising Higher Education in Malaysia, Star ACMS Conference 2006, 18-19 August 2006, Hotel Nikko, Kuala Lumpur

2007 National Conference on Academic Publication,Johor BahruFaculty Strategic Planning Workshop (2007-2010), 13-15 Feb 2007.Training Workshop for Evaluators, Engineering Accreditation Council (EAC), Board of Engineers, Malaysia, 21-22 Mac 2007Konvensyen Integriti Nasional 2007, Institut Integriti Malaysia, Pusat Konvensyen Antarabangsa Putrajaya, 6 September 2007Curriculum Development and Implementation of UTM-JKR Collaborative Masters Programs, 10-12 September 2007, MelakaSeminar ‘Global Accreditation – Challenges towards the Washington Accord Path’, Board of Engineers, Malaysia, Shah Alam, 2 December 2007

2008 Seminar ‘Accreditation–Expectation of the Washington Accord’, Board of Engineers, Malaysia, Pan Pacific KLIA, 30 March 2008Intensive EAC Penal Training, Hotel Seri Pacific KL, 20-22 June 2008

2009 ‘New Age Facilities Management’, Marcusevans, 17-18 August, KL.National Asset and Facilities Management Convention, PWTC, 26-27 Oct 2009

2010 Bengkel Jaminan Quality-Latihan Kod Amalan Untuk Akreditasi Program, 30 Mei-1 June 2010 Kuala Lumpur..MQF.Seminar Pembangunan dan Pengurusan Fasiliti Kampus Pendidikan, 13-15 Oktober 2010, Kuala Lumpur. UKM and MPPIPTA.

2011 Bankable and Sustainable Public Private Partnership Projects: Stakeholders’ Meeting of Minds, Asia Executive Programs, 24-25 May 2011, Sime Darby Convention Centre, KL

4th ASEAN Senior Management Development Course, Harvard Business School Alumni Club of Malaysia, Equatorial Hotel, Bangi, 26 June – 2 July 2011.

2012 The Social Enterprise Business Plan, one-day workshop conducted by Professor VR Kasturi, Harvard Business School, Organised by YMCA, Singapore, 13 March 2012

Executive Education: Accounting and Finance for Non-Financial Managers, National University of Singapore (NUS) Business School, 28 May – 1 June 2012

2013 Advanced Senior Management Program – Competitive Strategy, conducted by Professor David Yoffe of Harvard Business School, 16-17 April 2013. Organised by UTM International Business School,UTMKL.

21. INTELLECTUAL PROPERTY30


Abdullah Zawawi Awang, Wahid Omar, Hoong-Pin Lee, “Steel Strapping Tensioning Technique (SSTT) – The Innovative Solution for Ductile High-Strength Concrete, A Process/Method, Submitted at Aug 2012.

22. CO-CURRICULUM

(1) Leutenant in the Regimen Askar Wataniah Malaysia and attached at PALAPES, UTM (1992-1995).

23. COMMUNITY SERVICES

1. Facilitator of a Motivation Course in Sek. Men. Taman Ungku Tun Aminah- (1994)

2. AJK (Pendidikan) Penaja of Badan Kebajikan Islam Taman Desa Skudai (1994/95).

3. Penghulu Kawasan, Majlis Masyarakat Malaysia Birmingham (A body set-up under the Warden of Malaysian Student Department), 1996/97.

4. Pengerusi Surau Harmoni, Taman Desa Skudai –(June 1999- Jan 2002)5. Motivational talk to parents and teachers of Sekolah Kebangsaan Temerlok,

Trong, Perak (May 2000)6. Naib Pengerusi Penaja Badan Kebajikan Islam, Taman Sri Pulai Perdana 20047. Pengerusi Biro Kebajikan, Surau Taman Sri Pulai Perdana (Julai 2005-sekarang)8. AJK Penaja, Koperasi Penduduk Islam Taman Sri Pulai Perdana (September

2005 – May 2006)

9. Volunteer for Post-flood Technical Assistance (Repair a mosque) in Kampung Simis, Parit Sulong, Batu Pahat, Johor (10 February 2007)

31


Sept. 2013

32