Curriculum Vitae - JOO HYUN PARK Vitae_2_JHP.pdf · 2012-present: Institute of Materials, Minerals and Mining, IOM3 (UK), and Australasian Institute of Mining and Metallurgy, AusIMM

Curriculum Vitae - JOO HYUN PARK

1. Address

Department of Materials Engineering, Hanyang University, Ansan 426-791, Korea (Telephone: +82-31-400-5230, E-mail: [email protected]) 2. Education

Bachelor of Science: Metallurgical Engineering, Feb. 1997, Yonsei University, Seoul, Korea Master of Science: Metallurgical Engineering, Feb. 1999, Yonsei University, Seoul, Korea Doctor of Philosophy: Metallurgical Engineering, Feb. 2002, Yonsei University, Seoul, Korea

PhD thesis: Influence of Basicity and Fluorine Ions on Refining Ability and Structure of Molten Slags (supervisor: Prof. DONG JOON MIN)

3. Professional Carrier 2002-2008: Senior research scientist, Stainless Steel Research Group, Technical Research

Laboratories, POSCO, Pohang, Korea 2008-2013: Professor, School of Materials Science & Engineering, University of Ulsan,

Ulsan, Korea 2013-present: Professor, Department of Materials Engineering, Hanyang University, Ansan,

Korea 2015-present: Technical Advisory Professor, DONGKUK STEEL, Korea 2016-present: Guest Researcher, Korea Institute of Materials Science (KIMS), Korea 2018: Consulting Advisor, MetalGenTech, Korea 2019: External reviewer, European Science Foundation (ESF), France 2019-2021: Affiliated professor, KTH Royal Institute of Technology, Sweden 4. Awards and Achievements

2001: Grant from the Metals & Metallurgy Trust (Andrew Carnegie Research Fund), Institute of Materials (IOM3), UK

2001: POSCO Iron and Steel Paper Award (Best Paper), POSCO, Korea 2005: Iron and Steelmaking Technology Award (Bronze Medal), POSCO, Korea 2006 (Jan): Best Patent Award, POSCO, Korea 2006 (Jun): Best Patent Award, POSCO, Korea 2011 (Apr): Best Research Professor Award, University of Ulsan, Korea 2012 (Apr): Best Young Scientist Award, KIM+, Korea 2012 (Apr): Excellent Reviewer in the TOP 20% of Metall. Mater. Trans., TMS, USA 2013 (Mar): Excellent Reviewer in the TOP 20% of Metall. Mater. Trans., TMS, USA 2014 (Oct): 2014 Marcus A. Grossmann Young Authors Award (Metall. Mater. Trans. Best

Paper Award), ASM International, ASM, USA 2015 (Jul): Best Paper Award, 2nd International Conference on Mining, Materials and

Metallurgical Engineering (MMME2015), 20-21 July 2015, Barcelona, SPAIN 2016 (Apr): Excellent Reviewer in the TOP 20% of Metall. Mater. Trans., TMS, USA 2016 (Sep): Best Young Scholar Award, Hanyang University, Korea 2017 (Mar): 2016 Sawamura Award (ISIJ Int. Best Paper Award), Iron and Steel Institute of

Japan, JAPAN 2017 (Jul): Outstanding Reviewer Award, Journal of Non-Crystalline Solids, Elsevier,

NETHERLAND 2017 (Aug): Outstanding Reviewer Award, Materials Characterization, Elsevier,

NETHERLAND 2018 (Sep): Outstanding Reviewer Award, Journal of Materials Research & Technology,

Elsevier, NETHERLAND 2018 (Oct): Outstanding Reviewer Award, Ceramics International, Elsevier,

NETHERLAND

5. Academic society and professional activities

1997-present: The Korea Institute of Metals & Materials, KIM (KOR), Life member 1998-present: The Association of Iron and Steel Technology, AIST, formerly ISS (USA), Member 1999-present: The Metals, Materials, and Mining, TMS (USA), Member 2005-present: The American Ceramic Society, ACerS (USA), Member and "Journal of the

American Ceramic Society" Peer-reviewer 2005-present: Marquis Who's Who (USA), Who's Who in the World (2006-2018 Eds.) 2007-present: The Computer Coupling of Phase Diagrams and Thermochemistry, Calphad

(USA), "Calphad" Journal Peer-reviewer 2008: 4th International Congress on Science & Technology of Steelmaking, ICS 2008

(JPN), Session chair 2008-present: ELSEVIER (NED), "Resources, Conservation & Recycling" Journal Peer-reviewer 2009: 8th International Conference on Molten Slags, Fluxes, and Salts, MOLTEN 2009

(CHILE), Editorial committee (Technical reviewer) 2009: 4th Asia Steel International Conference, ASIA STEEL 2009 (KOR), Session chair 2009-present: The Korean Institute of Metals and Materials, KIMM (KOR), "Journal of Korean

Institute of Metals and Materials" & "Metals & Materials International" Peer-reviewer

2010: 12th International Ferro Alloy Congress, INFACON XII (FIN), Editorial committee (Technical reviewer)

2010-present: ELSEVIER (NED), "Journal of Chemical Thermodynamics" Peer-reviewer 2010-present: Iron and Steel Institute of Japan, ISIJ (JPN), Member and “ISIJ International”

Peer-reviewer 2010-present: STAHLEISEN (GER), "Steel Research International" Peer-reviewer 2011: 1st International Conference on High Manganese Steels, HMnS 2011 (KOR), Local

organizing committee, Session chair 2011: FRAY International Symposium (MEX), International committee 2011-present: The Minerals, Metals & Materials Society, TMS (USA), “Metallurgical & Materials

Transactions A and B” Peer-reviewer 2011-present: The Korean Institute of Metals and Materials, KIMM (KOR), Academic committee 2011-present: DGM (GER), "International Journal of Materials Research (formerly Zeitschrift für

Metallkunde)" Peer-reviewer 2011-present: The Korean Institute of Resources Recycling, KIRR (KOR), Member 2012: Clean Steel in Future - HG LEE International Symposium (KOR), Organizing

committee, Session chair 2012: International Welding & Joining Conference – Korea, IWJC-Korea (KOR), Session

chair 2012: 9th International Conference on Molten Slags, Fluxes, and Salts, MOLTEN 2012

(CHN), Session chair 2012: 8th Korea-Japan Workshop on Science and Technology in Ironmaking and

Steelmaking (KOR), Organizing committee, Session chair 2012-present: Institute of Materials, Minerals and Mining, IOM3 (UK), and Australasian Institute

of Mining and Metallurgy, AusIMM (AUS), “Mineral Processing & Extractive Metallurgy (TIMM C)” Peer-reviewer

2013: 9th Korea-Japan Workshop on Science and Technology in Ironmaking and Steelmaking (JPN), Organizing committee, Session chair

2013: 13th International Ferro Alloy Congress, INFACON XIII (KAZ), Editorial committee (Technical reviewer) and Session chair

2013-present: JOHN WILEY & SONS (USA), "Journal of Raman Spectroscopy" Peer-reviewer 2013-present: The Korean Institute of Resources Recycling, KIRR (KOR), "Journal of Korean

Institute of Resources Recycling" Editorial committee 2013-present: The Korean Institute of Metals and Materials, KIMM (KOR), "Metals & Materials

International" Editorial committee 2013-present: The Minerals, Metals & Materials Society, TMS (USA), “Metallurgical & Materials

Transactions B” Key reader (Board of review)

2013-present: The Canadian Institute of Metals, CIM (CAN), “Canadian Metallurgical Quarterly” Peer-reviewer

2014: 10th Korea-Japan Workshop on Science and Technology in Ironmaking and Steelmaking (KOR), Organizing committee, Session chair

2014-present: The Materials Information Society, ASM International (USA), “Journal of Phase Equilibria and Diffusion” Peer-reviewer

2014-present: ELSEVIER (NED), "Journal of Crystal Growth" Peer-reviewer 2014-present: ELSEVIER (NED), "Journal of Hazardous Materials" Peer-reviewer 2014-present: DE GRUYTER (GER), "High Temperature Materials and Processes" Peer-

reviewer 2014-present: TMS (USA), "Journal of Sustainable Metallurgy" Peer-reviewer 2015: 7th Korea-China Joint Symposium on Advanced Steel Technology (KOR),

Organizing committee 2015: 6th International Congress on Science & Technology of Steelmaking, ICS 2015

(CHN), Session chair 2015-present: ELSEVIER (NED), "Journal of Cleaner Production" Peer-reviewer 2015-present: ELSEVIER (NED), "Journal of Alloys & Compounds" Peer-reviewer 2015-present: ELSEVIER (NED), "Journal of Non-Crystalline Solids" Peer-reviewer 2015-present: SPRINGER (NED), "Journal of Radioanalytical and Nuclear Chemistry" Peer-

reviewer 2015-present: Societe Francaise Metallurgie Materiaux, SF2M (FRA), "Metallurgical Research &

Technology (formerly Revue de Métallurgie)" Peer-reviewer 2016: 5th International Conference on Process Development in Iron- & Steelmaking,

SCANMET V (SWE), International Advisory Board and Session chair 2016: 10th International Conference on Molten Slags, Fluxes, and Salts, MOLTEN 2016

(USA), Technical Advisory Committee, International Advisory Committee and Session Chair

2016: 11th Korea-Japan Workshop on Science and Technology in Ironmaking and Steelmaking (JPN), Organizing committee

2016: 8th Korea-China Joint Symposium on Advanced Steel Technology (KOR), Organizing committee

2016-present: The Minerals, Metals & Materials Society, TMS (USA), “JOM” Peer-reviewer 2016-present: The Chinese Society for Metals, CSM (CHN), "Journal of Materials Science &

Technology" Peer-reviewer 2017: 4th International Conference on Mining, Materials, and Metallurgical Engineering,

MMME2017 (ITALY), Scientific Committee Member 2017: 6th Asian Conference on Molten Salt Chemistry and Technology, AMS6 (KOR),

Session chair 2017: 9th Korea-China Joint Symposium on Advanced Steel Technology (KOR),

Organizing committee, Session chair 2017: Canadian Institute of Mining, Metallurgy and Petroleum, CIM (CAN), Conference

of Metallurgists, COM2017 (CAN), Poster competition judge committee 2017: European Congress on Advanced Materials and Processes, EUROMAT 2017

(GREECE), Session chair 2017: 12th Korea-Japan Workshop on Science and Technology in Ironmaking and

Steelmaking (KOR), Organizing committee 2017-2020: Iron and Steel Institute of Japan, ISIJ (JPN), “ISIJ International” Advisory Board

Member 2017-present: ELSEVIER (NED), "Materials Characterization" Peer-reviewer 2017-present: American Chemical Society, ACS (USA),"ACS Omega" Peer-reviewer 2017-present: American Chemical Society, ACS (USA),"ACS Sustainable Chemistry &

Engineering" Peer-reviewer 2017-present: TAYLOR & FRANCIS (UK), “Mineral Processing & Extractive Metallurgy Review”

Peer-reviewer 2018: 15th International Ferro Alloy Congress, INFACON XV (SOUTH AFRICA), Editorial

committee (Technical reviewer) and Session chair

2018: 3rd Multidisciplinary International Conference on Advanced in Metallurgical Processes and Materials, AdMet2018 (UKRINE), International Advisory Committee and Session chair

2018: 7th International Congress on Science & Technology of Steelmaking, ICS 2018 (ITALY), Session chair

2018: 5th International Conference on Mining, Materials, and Metallurgical Engineering, MMME2018 (SPAIN), Scientific Committee Member

2018: 16th Discussion Meeting on Thermodynamics of Alloys, TOFA2018 (KOREA), Organizing Committee Member

2018: 2nd International Conference on High-Entropy Materials, ICHEM2018 (KOREA), Program Committee Member

2018: 10th Korea-China Joint Symposium on Advanced Steel Technology (CHN), Organizing committee, Session chair

2018-present: Associação Brasileira de Metalurgia, Materiais e Mineração, ABM (BRA), "Journal of Materials Research and Technology" Peer-reviewer

2018-present: ELSEVIER (NED), "International Journal of Minerals, Metallurgy and Materials" Peer-reviewer

2018-present: TAYLOR & FRANCIS (UK), “Materials and Manufacturing Processes” Peer-reviewer

2018-present: ELSEVIER (NED), "Ceramics International" Peer-reviewer 2018-present: NATURE GROUP (UK), "Scientific Reports" Peer-reviewer 2019: 11th Korea-China Joint Symposium on Advanced Steel Technology (KOR),

Organizing committee 2019-present: Association for Iron and Steel Technology, AIST (USA), “AIST Transactions” Peer-

reviewer 2019-2020: International Conference on Inclusion/Precipitate Engineering in Steels, IPES

2020 (SWEDEN), International Organizing Committee, Session Chair 2019-2020: 11th International Conference on Molten Slags, Fluxes, and Salts, MOLTEN 2020

(KOR), Conference Organizer (Secretary General), International Advisory Committee, Technical Steering Committee, Session Chair

6. Patents

International (PCT) 1) J.H. Park, H.S. Song, H.H. Lee, D.S. Kim, and K.S. Lee: 2005.12

Manufacturing of Ferritic Stainless Steel Slabs with Equiaxed Grain Structures and the Ferritic Stainless Steel Manufactured by It (WO 07/074970 (2007.07.05), EP 1974063 (2010.07.21), CN 101351565 (2011.02.02), JP 2009-521599 (2009.06.04), US 2009-0223603 (2009.09.10))

2) D.S. Kim, J.H. Park, G.G. Hong, S.W. Jo, and H.H. Lee: 2006.12 A Ferro-alloy Inserting Apparatus with Reduced Absorption of Oxygen and Absorption of Nitrogen and Inserting Method Thereof (WO 08/023863 (2008.02.28), EP 2054533 (2009.12.30), CN 101541982 (2013.01.02), JP 5079005 (2012.09.07))

3) J.H. Park, S.M. Byun, S.B. Lee, M.O. Suk, and H.H. Lee: 2007.12 Method of Manufacturing Ultra Low Carbon Ferritic Stainless Steel (WO 09/075464 (2009.06.18), CN 101896298 (2012.10.10), JP 2011-516720 (2011.05.26), US 8277537 (2012.10.02))

Korean 1) J.H. Park, D.S. Kim, and Y.D. Lee: 2003.12 (A/N: 2003-0088883)

Improvement of Cleanness of Ferritic Stainless Steel Melts (P/N: 0573844, 2006.04) 2) J.H. Park, Jong H. Park, Y.Y. Lee, H.H. Lee, and H.S. Song: 2004.08 (A/N: 2004-0067523)

Method of Manufacturing Stainless Steel Melts containing Ultra Low Sulfur (P/N: 0911966, 2009.08) 3) J.H. Park, H.S. Song, and H.H. Lee: 2005.12 (A/N: 2005-0121528)

Manufacturing of Ferritic Stainless Steel Slabs with Equiaxed Grain Structures (P/N: 0729124, 2007.06)

4) J.H. Park, H.S. Song, H.H. Lee, D.S. Kim, and K.S. Lee: 2005.12 (A/N: 2005-0131297) Manufacturing of Ferritic Stainless Steel Slabs with Equiaxed Grain Structures and the Ferritic Stainless Steel Manufactured by It (P/N: 0729934, 2007.06)

5) D.S. Kim, J.H. Park G.G. Hong, S.W. Jo, and H.H. Lee: 2006.08 (A/N: 2006-0079693) Apparatus with Spreading Part for Inserting Ferro-alloy (P/N: 0812018, 2008.03)

6) J.H. Park, S.W. Jo, S.M. Byun: 2006.12 (A/N: 2006-0136912) Method of Manufacturing Ultra Low Nitrogen Ferritic Stainless Steels (P/N: 0879837, 2009.01)

7) J.H. Park, S.M. Byun, S.B. Lee, M.O. Suk, H.H. Lee: 2007.12 (A/N: 2007-0129304) Method of Manufacturing Ultra Low Carbon Ferritic Stainless Steel (P/N: 0922061, 2009.10)

8) J.H. Park, J.S. Park and C.H. Lee: 2012.04 (A/N: 2012-0045524) Flux composition acquisition method for reducing oxygen content in weld pool of weld zone and flux composition thereof (P/N: 1410200, 2014.06)

9) J.H. Heo and J.H. Park: 2014.08 (A/N: 2014-0105805) Method of recovering of iron from slag

10) C.W. Nam, K.H. Park, E.H. Jeong, and J.H. Park: 2014.11 (A/N: 2014-0153684)

Method of treatment of deep ocean manganese nodules using waste gypsum and a reducing agent (P/N: 1514838, 2015.04)


Preparation method of sulfide using oxide flux from deep ocean manganese nodules (P/N: 1514837, 2015.04)


Manufacturing method of matte sulfide from deep ocean manganese nodule using nonferrous metallurgical resource (P/N: 1620509, 2016.05)

13) M.S. Choi, J.H. Park, and J.H. Shin: 2014.12 (A/N: 2014-0190809) Method for manufacturing sponge metal (P/N: 1685006, 2016.12)

14) J.H. Park and J.H. Heo: 2016.01 (A/N: 2016-0009184) Method of recovering of manganese from slag (P/N: 1713825, 2017.03)

7. Invited Talks

1) J.H. Park and D.J. Min: 138th ISIJ Meeting, 20-22 Nov. 1999, Kanazawa, JAPAN. Thermodynamic Behavior of Carbon in Molten Slags (invited paper)

2) J.H. Park: Department of Metallurgical System Engineering, Graduate School, Yonsei University, 1 Jun. 2005, Seoul, KOREA. What We Want to Suppress and What We Want to Enhance at A Chance in Stainless Manufacturing Processes (invited seminar)

3) J.H. Park: Department of Materials Science and Engineering, Graduate School, Korea University, 4 Apr. 2006, Seoul, KOREA. OXYGEN - A Bridge between Molten and Final States of Advanced Materials (invited seminar)

4) J.H. Park and Y.Y. Lee: Sohn International Symposium on Advanced Processing of Metals and Materials, 27-31 Aug. 2006, San Diego, CA, USA. Formation of Spinel Phase in the Liquid Inclusions during Stainless Steelmaking Processes (keynote lecture)

5) J.H. Park, D.S. Kim, and S.B. Lee: POSCO and POSCO Specialty Steel Joint Workshop, 19 Mar. 2007, Pohang, KOREA. Inclusion Control Technology in Stainless Steelmaking processes (invited lecture)

6) J.H. Park: Department of Materials Science and Engineering, Graduate School, Seoul National University, 23 May. 2007, Seoul, KOREA. pros IRON, STEEL and GREEN Ages; Critical issues on novel steel processing (invited seminar)

7) J.H. Park: Photovoltaic Research Centre, Korea Institute of Energy Research (KIER), 3 Aug. 2007, Daejeon, KOREA. Thermodynamics of Slag-Metal Reaction for Removal of Impurities: Pyrometallurgical Refining of Silicon (invited seminar)

8) J.H. Park: Graduate Institute of Ferrous Technology (GIFT), POSTECH, 15 Jul. 2008, Pohang, KOREA. Fundamentals of Stainless Steelmaking Processes (iron- & steelmaking short course lecture)

9) J.H. Park and M.O. Suk: 2009 Fall Conference, Korea Institute of Metals & Materials (KIM+), 22-23 Oct. 2009, Daegu, KOREA. Interfacial reaction between ZrO2 refractory and CaF2-containing slags (invited lecture)

10) J.H. Park: Technical Research Lab., Dongbu Metal, 25 Feb. 2010, Donghae, KOREA. Use of High Mn Steels in Automotive Fields & Production Metallurgy of Mn Alloys (invited lecture)

11) J.H. Park and H. Todoroki: Graduate Institute of Ferrous Technology (GIFT), POSTECH, 15 Apr. 2010, Pohang, KOREA. State-of-the-art in control of MgOAl2O3 spinel inclusions in stainless steel industries – Solutions manual (invited lecture)

12) J.H. Park: Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven (KUL), 11 Jun. 2010, Leuven, BELGIUM. Impact of Slag Fundamentals on Steelmaking Processes (invited seminar)

13) J.H. Park: POSCO Technical Research Laboratories, POSCO, 18 Sep. 2010, Seoul, KOREA. Thermodynamic Fundamentals of Steelmaking and Refining Processes (POSCO iron & steel technology lecture course for graduate students)

14) J.H. Park: Technical Development Team, PosHimetal, 10 Oct. 2010, Gwangyang, KOREA. Developments of High Mn Steels & Process Metallurgy of Manganese Ferroalloys (invited lecture)

15) J.H. Park: Department of Advanced Materials Engineering, Korea Polytechnic University, 12 Jan. 2011, Siheung, KOREA. Use of High Mn Steels in Automotive Fields & Production Metallurgy of Mn Alloys (invited seminar)

16) J.H. Park: Technical Research Lab., Dongbu Metal, 21 Feb. 2011, Donghae, KOREA. Use of High Mn Steels in Automotive Fields & Production Metallurgy of Mn Alloys (invited lecture)

17) J.H. Park: Technical Development Team, Hyundai Steel, 30 Sep. 2011, Incheon, KOREA. Thermodynamics of Reduction of FeO in EAF Slags (invited lecture)

18) J.H. Park and G.H. Park: Fray International Symposium on Metals and Materials Processing in a Clean Environment, 27 Nov.-1 Dec. 2011, Cancun, MEXICO Sulfide Capacity of MnO-containing Slags measured by Gas-Slag Equilibration Method at 1873K (keynote lecture)

19) K.Y. Ko, J.H. Park and S.H. Hong: Fray International Symposium on Metals and Materials Processing in a Clean Environment, 27 Nov.-1 Dec. 2011, Cancun, MEXICO Dissolution mechanism of indium in CaO-SiO2-Al2O3 slag (keynote lecture)

20) J.H. Park: Department of Metallurgical and Ecological Engineering, University of Science and Technology of Beijing (USTB), 14 Feb. 2012, Beijing, CHINA. High Temperature Physical Chemistry of Metallurgical Processing (invited lecture)

21) J.H. Park: Technical Research Center, Hyundai Heavy Industry (HHI), 16 Jul. 2012, Ulsan, KOREA. Applications of computational thermodynamics to design of weld flux and prediction of inclusion formation in weld metal (invited lecture)

22) J.H. Park: Casting & Forging Technology Center, Doosan Heavy Industry and Construction (DHI&C), 20 Jul. 2012, Changwon, KOREA. Formation mechanism of spinel inclusions during melting and casting of high alloy steels (invited lecture)

23) J.H. Park: Surface Treatment Department, Gwangyang Works, POSCO, 26 Oct. 2012, Gwangyang, KOREA. Thermodynamics of Al sensor in hot dip galvanizing bath and dross formation behavior (invited lecture)

24) J.H. Park: Technical Research Center, SeAH Besteel, 31 Oct. 2012, Gunsan, KOREA. Fundamentals of inclusions and slags in steel refining processes (invited lecture)

25) J.H. Park: 12th International Mitsubishi Family Meeting, 20-21 Nov. 2012, Busan, KOREA Effect of slag composition on the distribution ratio of Pb between FetO-SiO2(-CaO, Al2O3) slag and molten copper (invited lecture)

26) J.H. Park: Technical Research Center, SeAH Besteel, 28 Jan. 2013, Gunsan, KOREA. Fundamentals of slag chemistry and its impact on steelmaking and casting processes (invited lecture)

27) J.H. Park: 5th Baosteel Biennial Academic Conference, 4-6 Jun. 2013, Shanghai, CHINA. Influence of inclusion particles on the solidification structure of iron alloys (keynote lecture)

28) J.H. Park: Technical Research Center, Hyundai Steel, 26 Jun. 2013, Dangjin, KOREA. Inclusion control technology in Al- and Si-killed steels (invited lecture)

29) J.H. Park: Steelmaking and Continuous Casting Department, TATA Steel EU RD&T, TATA Steel, 12 Jul. 2013, Ijmuiden, NETHERLANDS. Fundamentals of inclusions engineering in steel refining and continuous casting processes (invited lecture)

30) J.H. Park: Metals & Materials Research Department, LS-Nikko Copper, 27 Aug. 2013, Ulsan, KOREA. Effect of slag composition on the recovery of iron from Cu smelting slag by solid carbon (invited lecture)

31) J.H. Park: Technical Research Center, SeAH Besteel, 6 Sep. 2013, Gunsan, KOREA. Clean Steel Technologies (invited lecture)

32) J.H. Park: 3rd International Sustainability Symposium - ‘Innovative Waste Recycling and Energy Efficiency Solutions', SMaRT Sustainability Symposium @ UNSW, 3-4 Oct. 2013, Sydney, AUSTRALIA Effect of slag composition on the recovery of iron from waste Cu smelting slags by solid carbon (invited paper)

33) J.H. Park: Korean Intellectual Property Office (KIPO), 22 Oct. 2013, Daejeon, KOREA. Iron- and steelmaking processes and technologies (invited lecture)

34) J.H. Park: Technical Research Center, SeAH Besteel, 7 Nov. 2013, Gunsan, KOREA. Tundish metallurgy for clean steels (invited lecture)

35) J.H. Park: SABIC Technology Center – Jubail, Metals technology Center, Saudi Basic Industries Corp. (SABIC), 11 Nov. 2013, Jubail, KSA. Control of MgAl2O4 spinel inclusions in steelmaking processes (invited lecture)

36) J.H. Park: SABIC Technology Center – Jubail, Metals technology Center, Saudi Basic Industries Corp. (SABIC), 14 Nov. 2013, Jubail, KSA. Fundamentals of slag chemistry and structure-property relationship (invited lecture)

37) J.H. Park: Production Technology Team, Hyundai Steel, 29 Nov. 2013, Heongsung, KOREA. Impact of Slag Properties on Steelmaking and Refining Processes ; from Principles to Practices (invited lecture)

38) J.H. Park: Mn Day Workshop, 4 Dec. 2013, NTNU, Trondheim, NORWAY. Thermodynamics of reducing refining of phosphorus from SiMn melt using CaO-CaF2 flux and the effect of slag chemistry on the emission of PH3 gas during cooling of slag (invited lecture)

39) S.S. Park and J.H. Park: Proc. of EPD Symp. on Pyrometallurgy in Honor of David G.C. Robertson, (2014), pp. 243-250, TMS2014, 16-20 Feb. 2014, San Diego, USA Removal of Pb from Molten Copper by FetO-SiO2 (-CaO, Al2O3) Slag Treatment in Mitsubishi Process (invited lecture)

40) J.H. Park and K.Y. Ko: Proc. of EPD Symp. on Pyrometallurgy in Honor of David G.C. Robertson, (2014), pp. 605-612, TMS2014, 16-20 Feb. 2014, San Diego, USA Viscosity-Structure Relationship in the CaO-SiO2-MnO-CaF2 Slag for the Production of Manganese Ferroalloys (invited lecture)

41) J.H. Park: Department of Materials Science and Engineering, Graduate School, Yonsei University, 17 April 2014, Seoul, KOREA. Applications of high temperature physical chemistry to the metallurgical processing ; from Principles to Practices (invited seminar)

42) J.H. Park: Graduate Institute of Ferrous Technology (GIFT), POSTECH, 8 May. 2014, Pohang, KOREA. Refractory-Slag-Steel-Inclusion multiphase equilibria in high temperature metallurgical processing (invited lecture)

43) J.H. Park: Metallurgical and Environmental Department, Swerea MEFOS, 13 Jun. 2014, Lulea, SWEDEN. Thermodynamics of reducing refining of phosphorus from SiMn melt using CaO-CaF2 flux and the effect of slag chemistry on the emission of PH3 gas during cooling of slag (invited lecture)

44) J.H. Park: Technical research center, Dongkuk Steel, 19 Jun. 2014, Pohang, KOREA. Control of MgAl2O4 spinel inclusions in steelmaking processes and Tundish metallurgy for clean steels (invited lecture)

45) J.H. Park: 8th Steel Science Forum, 3-4 July 2014, KIM+, Yeosu, KOREA. High temperature physical chemistry for producing HiMAS and Mn-ferroalloys (invited lecture)

46) J.H. Park: Technical research center, SungEel HiTech, 28 July 2014, Gunsan, KOREA. Fundamentals of slag chemistry in pyrometallurgical processing (invited lecture)

47) J.H. Park: Production Technology Team, Hyundai Steel, 31 July 2014, Incheon, KOREA. Process simulation of EAF operation in Hyundai Steel Incheon Works ; Iron recovery from EAF slag (invited lecture)

48) J.H. Park: Department of Metallurgical and Ecological Engineering, University of Science and Technology of Beijing (USTB), 6-8 Aug. 2014, Beijing, CHINA. Control of MgAl2O4 spinel inclusions in steelmaking and continuous casting processes (invited lecture)

49) J.H. Park: Department of Metallurgical and Ecological Engineering, University of Science and Technology of Beijing (USTB), 6-8 Aug. 2014, Beijing, CHINA. Tundish metallurgy for clean steels ; Active use of tundish flux and control of steel reoxidation (invited lecture)

50) J.H. Park: Department of Mechanical Engineering, Hanyang University, 20 Jan. 2015, Seoul, KOREA. Metallurgical reactions in electric arc furnace processes (invited lecture)

51) J.H. Park: School of Materials Science and Engineering, Korea University, 24 Jan. 2015, Seoul, KOREA. Structure-Property relationship of aluminosilicates using Raman spectroscopy (invited lecture)

52) J.H. Park: Technical Research Center, SeAH Besteel, 9 Feb. 2015, Gunsan, KOREA. Fundamentals of Refining Technology for Ultra Clean Bearing Steels (invited lecture)

53) J.H. Park: 16th EAF Steelmaking Short Course, Korea Iron & Steel Association (KOSA), 20 Mar. 2015, Gyeongju, KOREA. Fundamentals of slag chemistry and its impact on steelmaking and refining processes (invited lecture)

54) J.H. Park: Technical Research Center, POSCO, 27 Mar. 2015, Gwangyang, KOREA. High Temperature Physical Chemistry for Producing High Manganese Aluminum Alloyed Steels (invited lecture)

55) J.H. Park and T.S. Kim: Proc. 6th Int. Cong. on Sci. & Technol. of Steelmaking [ICS 2015], (2015), pp. 866-869, ICS 2015, 12-14 May, 2015, Beijing, CHINA Viscosity of Ladle Refining Slags and Structural Analysis using micro-Raman Spectroscopy (keynote lecture)

56) J.H. Park: Department of Metallurgical and Ecological Engineering, University of Science and Technology of Beijing (USTB), 15-17 May 2015, Beijing, CHINA. Fundamentals of Slag Chemistry for Producing Clean Steels (invited lecture)

57) J.H. Park: Department of Metallurgical and Ecological Engineering, University of Science and Technology of Beijing (USTB), 15-17 May 2015, Beijing, CHINA. Tundish metallurgy for clean steels ; Active use of tundish flux and control of steel reoxidation (invited lecture)

58) J.H. Park: Steelmaking Department, Gwangyang Works, POSCO, 22 May 2015, Gwangyang, KOREA. Fundamentals and Applications of Slag Theory to Steelmaking and Refining Processes ; from Principle to Practice

59) J.H. Park: Technical Research Center, SeAH Besteel, 8 June 2015, Gunsan, KOREA. Desulfurization technology for ultra low sulfur bearing steels (invited lecture)

60) Y.S. Han and J.H. Park: Technical Research Center, SungEel HiTech, 24 June 2015, Gunsan, KOREA. Flux Design for Recovery of Precious Metals from Mineral Ores (invited lecture)

61) J.H. Park: Summer Iron- & Steelmaking Technology Short Course, Korea Iron & Steel Association (KOSA), 15 July 2015, Gyeongju, KOREA. Fundamentals and applications of steelmaking and refining processes (invited lecture)

62) J.H. Park: Steelmaking Department, Gwangyang Works, POSCO, 22 Oct 2015, Gwangyang, KOREA. Tundish metallurgy for clean steels ; Active use of tundish flux and control of steel reoxidation (invited lecture)

63) J.H. Park: Proc. Int. Union of Mater. Res. Soc. – Int. Conf. on Adv. Mater. [IUMRS-ICAM 2015], (2015), IUMRS-ICA 2015, 25-29 October 2015, Jeju, KOREA Fundamentals and Applications of Slag Properties for Producing Clean Steels in Ladle Refining and Tundish Metallurgy (invited lecture)

64) J.H. Park: Technical Research Center, SeAH CSS, 4 Nov 2015, Changwon, KOREA. Fundamentals and Applications of Slag Theory to Steelmaking and Refining Processes ; from Principle to Practice (invited lecture)

65) J.H. Park: Technical Research Center, SeAH Besteel, 18 Nov 2015, Gunsan, KOREA. Metallurgical reactions in EAF processes (invited lecture)

66) J.H. Park: 30th Glass Symposium, (2015), Korean Ceramic Society, 4 Dec 2015, Seoul, KOREA. Physicochemical Properties of Aluminosilicate Melts at High Temperatures ; Upgrading metals by oxide melts (invited lecture)

67) J.H. Park: Technical Research Center, Dongbu Steel, 13 Jan 2016, Incheon, KOREA. Use of Al sensor in hot dip galvanizing bath and experimental research of dross formation behavior (invited lecture)

68) J.H. Park: Iron- & Steelmaking Technology Short Course, Korea Iron & Steel Association (KOSA), 20 January 2016, Pohang, KOREA. Fundamentals of ironmaking, steelmaking and refining processes (invited lecture)

69) J.H. Park: Proc. 10th Int. Conf. on Molten Slags, Fluxes, and Salts [MOLTEN 2016], (2016), pp. 715-721, MOLTEN 2016, 22-26 May 2016, Seattle, USA Understanding sulfide capacity of molten aluminosilicates via structural information from Raman and NMR spectroscopic methodologies (invited lecture)

70) J.H. Park: Summer Iron- & Steelmaking Technology Short Course, Korea Iron & Steel Association (KOSA), 22 June 2016, Gyeongju, KOREA. Fundamentals and applications of steelmaking and refining processes (invited lecture)

71) J.H. Park: Mineral Processing & Extractive Metallurgy Short Course, Energy and Mineral Resources Development Association of Korea (EMRD), 23 September 2016, Seoul, KOREA Fundamentals and applications of pyrometallurgy and refining technology (invited lecture)

72) J.H. Park: Korean Intellectual Property Office (KIPO), 13 Oct. 2016, Daejeon, KOREA Iron- and steelmaking processes and technologies (invited lecture)

73) J.H. Park: Casting & Forging Technology Center, Doosan Heavy Industry and Construction (DHI&C), 16 Feb. 2017, Changwon, KOREA. Fundamentals and applications of slag theory to hydrogen refining processes (invited lecture)

74) J.H. Park: 19th EAF Steelmaking Short Course, Korea Iron & Steel Association (KOSA), 24 Mar. 2017, Busan, KOREA. Fundamentals of slag chemistry and its impact on steelmaking and refining processes (invited lecture)

75) J.H. Park: 2017 Spring Conference, Korea Institute of Metals & Materials (KIM+), 26-28 April 2017, Changwon, KOREA. Understanding physicochemical properties of molten slag and application of computational thermodynamics to steelmaking processes (invited lecture)

76) J.H. Heo and J.H. Park: 2nd Metallurgy Innovation Symposium [MIS2017], (2017), MIS2017, 6-9 June 2017, Beijing, CHINA Recovery of iron and manganese from EAF slag via novel aluminothermic smelting reduction (ASR) process (invited lecture)

77) J.H. Park: Chair of Ferrous Metallurgy, Department of Metallurgy, Montanuniversitaet Leoben, 23 June 2017, Leoben, AUSTRIA Grain refinement of cast structure of ferritic steels using inclusion particles (invited lecture)

78) J.H. Park: Proc. of Int. Metall. Process Workshop for Young Scholars [IMPROWYS 2017], (2017), IMPROWYS 2017, 11 – 12 August, 2017, Shenyang, CHINA Use of inclusion particles for the grain refinement during melting and casting of ferritic steels (invited lecture)

79) J.H. Park: Technical Research Center, Dongkuk Steel, 19 Oct. 2017, Pohang, KOREA Fundamentals and Applications of Slag Theory to Steelmaking and Refining Processes ; from Principle to Practice (invited lecture)

80) J.H. Park: Incheon Steel Works, Hyundai Steel, 31 Oct. 2017, Incheon, KOREA Fundamentals and Applications of Slag Theory to Steelmaking and Refining Processes ; from Principle to Practice (invited lecture)

81) J.G. Kang, J.H. Shin and J.H. Park: 3rd Int. Conf. on Sci. Technol. of Ironmak. & Steelmak. [STIS 2017], (2017), STIS 2017, 11 – 13 December, 2017, IIT Kanpur, INDIA Desulfurization kinetics and inclusion formation mechanism in high-S containing steel during secondary refining process (keynote lecture)

82) J.H. Park: Technical Research Center, SeAH Besteel, 06 April 2018, Gunsan, KOREA Diffusion of fundamental theory for best practice in SeAH Besteel (invited lecture)

83) J.H. Park: Technical Research Center, Heesung PMTech, 17 May 2018, Dangjin, KOREA Fundamentals and Applications of Slag-Refractory Reactions to Pyrometallurgical Processes (invited lecture)

84) T.S. Kim and J.H. Park: 15th Int. Ferro Alloy Cong. [INFACON XV 2018], (2018), INFACON XV 2018, 25-28 Feb. 2018, Cape Town, SOUTH AFRICA Influence of CaF2 content on viscosity and structure of MnO-BaO-SiO2-MgO-CaF2 slags (invited lecture)

85) J.H. Park, J.G. Kang, T.S. Kim and Y. Chung: 7th Int. Cong. on Sci. & Technol. of Steelmaking [ICS 2018], (2018), ICS 2018, 13-15 Jun., 2018, Venice, ITALY Influence of physicochemical properties of ladle slag on desulfurization reaction kinetics: Criteria for transition of rate controlling step (keynote lecture)

86) J.H. Park: Department of Metallurgical and Ecological Engineering, University of Science and Technology of Beijing (USTB), 13-15 July 2018, Beijing, CHINA Fundamentals of Slag Properties for High Quality Steelmaking Processes (invited lecture)

87) J.H. Park: 10th Int. Conf. on Clean Steel [Clean Steel 2018], (2018), Clean Steel 2018, 18-20 Sep., 2018, Budapest, HUNGARY Fundamentals and Applications of Slag Properties for Producing Clean Steels in Ladle and Tundish (plenary lecture)

88) J.H. Park: Institute of Metals and Technology (IMT), 21 Sep, 2018, Ljubljana, SLOVENIA Influence of slag viscosity on desulfurization kinetics and steel cleanliness (invited lecture)

89) J.H. Shin and J.H. Park: China Symposium on Sustainable Steelmaking Technology [CSST 2018], (2018), CSST 2018, 25-27 Oct., 2018, Tianjin, CHINA Control of MgAl2O4-CaS(MnS) Complex Inclusions in Al-killed Resulfurized Steel Melts (keynote lecture)

90) J.H. Park: Department of Materials Science and Engineering, Seoul National University of Science & Technology, 31 October 2018, Seoul, KOREA Property-Structure-Processing of Ferritic Stainless Steels (invited lecture)

91) J.H. Park: Department of Chemical and Metallurgical Engineering, Aalto University, 29 November 2018, Helsinki, FINLAND High temperature physical chemistry of slag-metal-refractory multiphase reactions (invited lecture)

92) J.H. Park: 2019 Spring Conference Abstract of the KIMM, (2019), Kor. Inst. Met. & Mater., April 2019, Changwon, KOREA Fundamentals and Applications of Slag Properties for Producing Clean Steels (invited lecture)

8. Current research interests

Inclusion Control and Clean Steel Technology 1) Inclusion control by Al & Si deoxidation in resulfurized steel 2) Thermodynamics of Al deoxidation and inclusion formation behavior in high Mn steels 3) Control of spinel inclusion in molten steel by ‘slag-refractory-metal’ multiphase equilibria 4) Optimization of ladle slag for ultra-low sulfur bearing steels 5) Development of recovery of REE (rare earth element) and inclusion technology in high

temperature corrosion-resistant stainless steels 6) Thermodynamics of inclusion formation in high Cr heat resistant steel melts 7) Optimization of RH slag for automotive steel production 8) Viscosity of LF slag and their influence on the cleanliness of bearing steels 9) Optimization of tundish flux for production of clean steels Use of Inclusions for Steel Properties (Inoculation Technology) 1) Effect of oxides on the refinement of solidification structure of AHSS weldments 2) Effect of spinel and TiN inclusion on the grain refinement of ferritic stainless steel CC slab Pyrometallurgy for Ferroalloys & Nonferrous Metals 1) Refining of high functional manganese ferroalloys (FeMn and SiMn) used for high Mn steels 2) High temperature smelting reduction of ilmenite 3) Innovative Mg extraction process using Ceria-based solid oxide membrane 4) Thermodynamics of impurity removal from molten Cu Sustainable Technology 1) Development of reduction technology using Fe-containing steel mill wastes 2) Optimization modeling of EAF process for active use of DRI 3) Reduction of fluorspar consumption in EAF and LF processes 4) Influence of CaF2 on refractory corrosion and refining efficiency in ladle furnace 5) Optimization of ESR slag for the production of Ni-base superalloys turbines Fundamentals of High Temperature Physical Chemistry 1) Development of ‘Refractory-Slag-Metal-Inclusion’ multiphase reaction models using FactSage 2) Molecular structure analysis of slags using various spectroscopic methodologies ; FT-IR,

Raman, XPS, and NMR spectroscopies 3) Thermodynamics of slag-refractory interfacial reactions ; Refractory corrosion 9. Supervisor and Review Committee of Master and Doctoral Theses

1) G.H. Park: Sulfide capacity of the CaO-SiO2-MnO slag at 1873 K, MSc thesis, Univ. of Ulsan, Feb. 2011.

2) W. Kim: Study on the electrochemical reaction of interfacial oxygen in molten steel, PhD thesis, Yonsei Univ., Feb. 2011.

3) J.G. Park: Thermodynamic behavior of copper in oxysulfide inclusions for Mn/Si deoxidized steel, PhD thesis, Yonsei Univ., Aug. 2011.

4) D.Y. Jang: Thermodynamic behavior of copper in CaO-B2O3 and BaO-B2O3 slags, MSc thesis, Yonsei Univ., Aug. 2011.

5) D.J. Kim: Interfacial reaction kinetics between CaO-SiO2-MgO-Al2O3 flux and Fe-Mn-Al steel melts at 1873 K, MSc thesis, Univ. of Ulsan, Feb. 2012.

6) Y.J. Kim: Effect of FeO and Al2O3 on MgO solubility in CaO-SiO2-FeO-Al2O3-MgO slag at 1823K, MSc thesis, Yonsei Univ., Feb. 2012.

7) K.Y. Ko: Thermodynamics of indium dissolution behavior in CaO-SiO2-Al2O3 slag, MSc thesis, Univ. of Ulsan, Feb. 2013.

8) J.S. Park: Effect of complex inclusion particles on the solidification structure of iron alloy, MSc thesis, Univ. of Ulsan, Feb. 2013.

9) J.H. Shin: Solubility of nitrogen in high manganese steel (HiMnS) and thermodynamics of reducing refining of phosphorus from SiMn alloy using CaO-CaF2 flux, MSc thesis, Univ. of Ulsan, Feb. 2013.

10) R.X. Piao: Thermodynamic studies on oxysulfide containing CaO-MnO-Al2O3-SiO2-S systems, and their applications to inclusions engineering in sulfur bearing steels, PhD thesis, GIFT, POSTECH, Aug. 2013.

11) S.K. Kwon: Effect of Ce on characterization of non-metallic inclusions in steels and the interfacial reaction mechanism between refractory and austenitic stainless steel melt at 1873K, MSc thesis, Univ. of Ulsan, Feb. 2014.

12) J.H. Heo: Effect of slag composition on the distribution behavior of Pb between FetO-SiO2 (-CaO, Al2O3) slag and molten copper, MSc thesis, Univ. of Ulsan, Feb. 2014.

13) M.K. Paek: Inclusion Thermodynamics of High-Al and High-Mn Alloyed Liquid Steels, PhD thesis, Hanyang University, Feb. 2014.

14) Y. Bi: Three dimensional determination of inclusions in ferroalloys and steel samples, PhD thesis, KTH (Royal Institute of Technology), Stockholm, SWEDEN, June 2014.

15) L. Yu: Carbothermal reduction of quartz in the N2-H2 gas atmosphere, MSc thesis, UNSW (Univ. of New South Wales), Sydney, AUSTRALIA, Dec. 2014.

16) E.H. Jeong: Sulfurization of Fe-Ni-Cu-Co alloy to matte phase by carbothermic reduction of calcium sulfate, MSc thesis, Hanyang University, Aug. 2015.

17) Y.S. Han: Thermodynamics on dissolution behavior of Indium in FeO-SiO2-Al2O3-5CaO-MgOsat slag system, MSc thesis, Hanyang University, Aug. 2015.

18) Y.J. Kang: Nucleation behavior of acicular ferrite in the multi-pass weld metal of high strength steel, PhD thesis, Hanyang University, Feb. 2016.

19) M.S. Kim: Reaction mechanism and kinetic analysis of chemical reactions between high Mn-high Al steel and CaO-SiO2 type mold flux, PhD theis, GIFT, POSTECH, Feb. 2016.

20) J.H. Park: Numerical analysis of the smelting furnace in Mitsubishi process for Cu refining, PhD thesis, Seoul National University, Feb. 2016.

21) J.S. Han: Sulfide capacity of CaO-Al2O3-SiO2-CaS at CaS solubility limit, MSc thesis, Hanyang University, Feb. 2016.

22) S.J. Jeong: Effect of Ce2O3 on the sulfide capacity and structure of MnO-SiO2-Al2O3 system, MSc thesis, Hanyang University, Aug. 2016.

23) J.H. Seo: Thermodynamic analysis and experimental study on deoxidation of titanium by calcium, MSc thesis, Hanyang University, Aug. 2016.

24) C.H. Eom: Physical chemistry of the reduction behavior of manganese oxide, PhD thesis, Yonsei University, Aug. 2016.

25) J.G. Kang: Effect of slag chemistry on desulfurization kinetics in secondary refining processes, MSc thesis, Hanyang University, Feb. 2017.

26) J.G. Yang: Distribution behavior of aluminum and titanium between Ni-based alloys and molten slags in electro slag remelting (ESR) process, MSc thesis, Hanyang University, Feb. 2017.

27) S.M. Lee: Effect of initial iron content in molten zinc bath on dissolution kinetics of iron during hot dip galvanizing process, MSc thesis, Hanyang University, Feb. 2017.

28) J.H. Shin: Computational thermodynamics to predict the inclusions during steelmaking processes of specialty steels, PhD thesis, Hanyang University, Aug. 2017.

29) J.M. Jang: Thermodynamics of nitride and oxide formation in high alloy steel melts, PhD thesis, Hanyang University, Aug. 2017.

30) M.H. Lee: Effect of grain refinement of solidification structure on formability of ferritic stainless steel, MSc thesis, Hanyang University, Aug. 2017.

31) M.A.H. Shuva: Analysis of thermodynamic behaviour of valuable elements and slag structure during e-waste processing through copper smelting, PhD thesis, Swinburne University of Technology, Melbourne, AUSTRALIA, Jul. 2017.

32) F. Li: SiC production using SiO2 and C agglomerates, PhD thesis, NTNU (Norwegian University of Science and Technology), Trondheim, NORWAY, Oct. 2017.

33) K.H. Do: Thermodynamics of Dephosphorization, Desulfurization and Deoxidation in High Cr-containing Liquid Iron, PhD thesis, Hanyang University, Feb. 2018.

34) S. Lee: Investigation of viscosity and sulfide capacity considering ionic structure of slag, PhD thesis, Yonsei University, Feb. 2018.

35) T. Yoshioka: Parameters influencing inclusion compositions in Al-killed steel melts during a secondary refining process, KTH (Royal Institute of Technology), Stockholm, SWEDEN, June 2018.

36) J.H. Heo: Reduction kinetics and recovery of valuable metals from metallurgical slags based on high temperature physical chemistry, PhD thesis, Hanyang University, Aug. 2018.

37) T. Alatarvas: Evolution of inclusion population in calcium treated ultra-high strength steels, PhD thesis, University of Oulu, Oulu, FINLAND, Nov. 2018.

38) J.S. Han: Physicochemical consideration of interfacial reaction between steelmaking slag and MgO refractory, MSc thesis, Hanyang University, Feb. 2019.

39) N. Choi: Effect of melting condition on microstructure and mechanical properties of CoCrFeMnNi high entropy alloy, MSc thesis, Hanyang University, Feb. 2019.

10. List of publications

Attached

List of publications

Journal articles (International)

1) I. Sohn, D.J. Min, and J.H. Park: Steel Res., vol. 70, (1999), no. 6, pp. 215-220.

Thermodynamic study on the effect of CaF2 on the nitrogen and carbon solubility in the CaO-

Al2O3-CaF2 slag system

2) J.H. Park and D.J. Min: Metall. Mater. Trans. B, vol. 30B, (1999), no. 4, pp. 689-694.

Quantitative Analysis of the Relative Basicity of CaO and BaO by Silver Solubility in Slags

3) J.H. Park and D.J. Min: Metall. Mater. Trans. B, vol. 30B, (1999), no. 6, pp. 1045- 1052.

Solubility of Carbon in CaO-B2O3 and BaO-B2O3 Slags

4) J.H. Park and D.J. Min: Mater. Trans., JIM, vol. 41, (2000), no. 3, pp. 425-428.

Solubility of Silver in MO(M2O)-B2O3 (M=Ca, Ba, and Na) Slags

5) J.H. Park and D.J. Min: ISIJ Int., vol. 40, (2000), suppl., pp. S96-S100.

Thermodynamic Behavior of Carbon in Molten Slags

6) J.H. Park and D.J. Min: Metall. Mater. Trans. B, vol. 32B, (2001), no. 2, pp. 297-303.

Thermodynamic Behavior of Na2O-B2O3 Melt

7) H.S. Kim, D.J. Min, and J.H. Park: ISIJ Int., vol.41, (2001), no. 4, pp. 317-324.

Foaming Behavior of CaO-SiO2-FeO-MgOsatd-X (X=Al2O3, MnO, P2O5, and CaF2) Slags

at High Temperatures

8) T.G. Kim, W.K. Lee, J.H. Park, D.J. Min, and H.S. Song: ISIJ Int., vol. 41, (2001), no. 12, pp.

1460-1464.

Sulfide Capacity and Phase Equilibria of MnO-TiO2-MnS System at 1723 K

9) J.H. Park, D.J. Min, and H.S. Song: ISIJ Int., vol. 42, (2002), no. 1, pp. 38-43.

Structural Investigation of CaO-Al2O3 and CaO-Al2O3-CaF2 Slags via Fourier Transform

Infrared Spectra


Carbide Capacity of CaO-Al2O3-CaF2 Slag at 1773 K

11) S.H. Lee, S.M. Moon, J.H. Park, and D.J. Min: Metall. Mater. Trans. B, vol. 33B, (2002), no.

1, pp. 55-59.

Thermodynamic Behavior of Nickel in CaO-SiO2-FetO Slag


FT-IR Spectroscopic Study on Structure of CaO-SiO2 and CaO-SiO2-CaF2 Slags

13) J.H. Park, D.J. Min and H.S. Song: Metall. Mater. Trans. B, vol. 33B, (2002), no. 5, pp. 723-

729.

The Effect of CaF2 on the Viscosities and Structures of CaO-SiO2(-MgO)-CaF2 Slags

14) J.H. Park and D.J. Min: ISIJ Int., vol. 44, (2004), no. 2, pp. 223-228.

Carbide Capacity of CaO-SiO2-CaF2(-Na2O) Slags at 1773 K

15) J.H. Park, D.J. Min, and H.S. Song: Metall. Mater. Trans. B, vol. 35B, (2004), no. 2, pp. 269-

275.

Amphoteric Behavior of Alumina in Viscous Flow and Structure of CaO-SiO2(-MgO)-Al2O3

Slags

16) D.S. Kim, J.H. Park, Jong H. Park, S.B. Lee, and H.G. Lee: Rev. Metall., (2004), no. 4, pp.

291-299.

Improvement of Cleanliness of 16%Cr-containing Ferritic Stainless Steel in AOD Processes

17) J.H. Park, H.S. Song, and D.J. Min: ISIJ Int., vol. 44, (2004), no. 5, pp. 790-794.

Reduction Behavior of EAF Slags containing Cr2O3 using Aluminum at 1793 K

18) J.H. Park and D.J. Min: J. Non-Cryst. Solids, vol. 337, (2004), no. 2, pp. 150-156.

Effect of fluorspar and alumina on the viscous flow of calcium silicate melts containing MgO

19) J.H. Park and D.J. Min: Steel Res. Int., vol. 75, (2004), no. 12, pp. 807-811.

Thermodynamics of Fluoride Vaporization from Slags containing CaF2 at 1773 K

20) J.H. Park, D.S. Kim, and S.B. Lee: Metall. Mater. Trans. B, vol. 36B, (2005), no. 1, pp. 67-

73.

Inclusion Control of Ferritic Stainless Steel by Aluminum Deoxidation and Calcium Treatment

21) J.H. Park and D.S. Kim: Metall. Mater. Trans. B, vol. 36B, (2005), no. 4, pp. 495-502.

Effect of CaO-Al2O3-MgO Slags on the Formation of MgO-Al2O3 Inclusions in Ferritic

Stainless Steel

22) J.H. Park: J. Am. Ceram. Soc., vol. 89, (2006), no. 2, pp. 608-615.

Solidification Behavior of Calcium Aluminosilicate Melts containing Magnesia and Fluorspar

23) J.H. Park and D.J. Min: Mater. Trans., vol. 47, (2006), no. 8, pp. 2038-2043.

Effect of ZrO2 Addition to the CaO-SiO2-MgO-CaF2 Slags on the Sulfur Removal from the

16Cr-14Ni Stainless Steel Melts

24) J.H. Park and Y.B. Kang: Metall. Mater. Trans. B, vol. 37B, (2006), no. 5, pp. 791-798.

Effect of Ferrosilicon Addition on the Composition of Inclusions in 16Cr-14Ni-Si Stainless

Steel Melts

25) J.H. Park, D.S. Kim, S.B. Lee, and Y.Y. Lee: AIST Trans. in Iron & Steel Technology, vol.

4, (2007), no. 1, pp. 137-144.

Inclusion Control of Fe-16%Cr Stainless Steel Melts by Aluminum Deoxidation and Calcium

Treatment (invited paper, ICS2005 special issue)

26) J.J. Pak, J.O. Jo, S.I. Kim, W.Y. Kim, T.I. Chung, S.M. Seo, J.H. Park, and D.S. Kim: ISIJ Int.,

vol. 47, (2007), no. 1, pp. 16-24.

Thermodynamics of Titanium and Oxygen Dissolved in Liquid Iron Equilibrated with Titanium

Oxides

27) J.H. Park: CALPHAD, vol. 31, (2007), no. 2, pp. 149-154.

Formation of CaZrO3 at the Interface between CaO-SiO2-MgO-CaF2(-ZrO2) slags and

magnesia refractories: Computational and experimental study (top 25 hottest articles in

CALPHAD 2007)

28) J.H. Park: Metall. Mater. Trans. B, vol. 38B, (2007), no. 4, pp. 657-663.

Formation Mechanism of Spinel-type Inclusions in High Alloyed Stainless Steel Melts

29) J.H. Park and D.J. Min: ISIJ Int., vol. 47, (2007), no. 9, pp. 1368-1369.

Discussion on "The Estimation of the Iso-viscosity Lines in Molten CaF2-CaO-SiO2 System"


Solidification structure of CaO-SiO2-MgO-Al2O3(-CaF2) systems and computational phase

equilibria: Crystallization of MgAl2O4 spinel (top 25 hottest articles in CALPHAD 2012 full

year)

31) J.H. Park: Mater. Sci. Eng. A, vol. 472, (2008), no. 1-2, pp. 43-51.

Thermodynamic investigation on the formation of inclusions containing MgAl2O4 spinel

during 16Cr-14Ni austenitic stainless steel manufacturing processes

32) J.H. Park, H. Kim, and D.J. Min: Metall. Mater. Trans. B, vol. 39B, (2008), no. 1, pp. 150-

153.

Novel Approach to Link between Viscosity and Structure of Silicate Melts via Darken's

Excess Stability Function: Focus on the Amphoteric Behavior of Alumina

33) M.H. Song, S.M. Han, D.J. Min, G.S. Choi, and J.H. Park: Scripta Mater., vol. 59, (2008), no.

6, pp. 623-626.

Diffusion of oxygen in -titanium

34) J.H. Park, S.B. Lee and H.R. Gaye: Metall. Mater. Trans. B, vol. 39, (2008), no. 6, pp. 853-

861.

Thermodynamics of the Formation of MgO-Al2O3-TiOx Inclusions in Ti-stabilized 11Cr

Ferritic Stainless Steel

35) M.S. Shin, J. Lee and J.H. Park: ISIJ Int., vol. 48, (2008), no. 12, pp. 1665-1669.

Wetting Characteristics of Liquid Fe-19%Cr-10%Ni Alloys on Dense Alumina Substrates

36) S.M. Han, D.J. Min, J.H. Park, Jung H. Park, and J.M. Park: Rev. Metall., (2008), no. 12, pp.

601-608.

A kinetic study of controlling nitrogen in process for boron steel by using 30N2 isotope gas

37) S.M. Han, Y.S. Lee, J.H. Park, G.S. Choi, and D.J. Min: Mater. Trans., vol. 50, (2009), no. 1,

pp. 215-218.

Deoxidation thermodynamics of -titanium by Ca-CaCl2 and Ca-CaF2 fluxes

38) J.G. Park, J.H. Park, Y.S. Lee, S.M. Jung, and D.J. Min: ISIJ Int., vol. 49, (2009), no. 2, pp.

171-177.

Thermodynamics of Copper Dissolution into the MnO-SiO2-MnS Inclusion System

39) J.H. Park, S.B. Lee, D.S. Kim, and J.J. Pak: ISIJ Int., vol. 49, (2009), no. 3, pp. 337-342.

Thermodynamics of Titanium Oxide in CaO-SiO2-Al2O3-MgOsatd-CaF2 Slag equilibrated

with Fe-11mass%Cr Melt

40) M.H. Song, S.M. Han, G.S. Choi, D.J. Min, and J.H. Park: Metall. Mater. Trans. A, vol. 40,

(2009), no. 3, pp. 495-498.

Diffusion Kinetics of Oxygen in -Titanium Measured by Molten Flux Method

41) M.O. Suk and J.H. Park: J. Am. Ceram. Soc., vol. 92, (2009), no. 3, pp. 717-723.

Corrosion Behavior of Zirconia Refractory by CaO-SiO2-MgO-CaF2 Slag

42) S.M. Han, J.H. Park, S.M. Jung, Jung H. Park, and D.J. Min: ISIJ Int., vol. 49, (2009), no. 4,

pp. 487-494.

Kinetic Study on Surface Dissolution of Nitrogen on Liquid Steel by Isotope Exchange

Technique

43) J. Lee, A. Tazuke, T. Tanaka and J.H. Park: Met. Mater. Int., vol. 15, (2009), no. 3, pp. 501-

505.

Estimation of Sulfur Segregation at the Interface between Molten Iron and Graphite

Substrate from Wetting Experiments

44) J.H. Park, I.H. Jung and S.B. Lee: Met. Mater. Int., vol. 15, (2009), no. 4, pp. 677-681.

Phase Diagram Study for the CaO-SiO2-Cr2O3-5mass%MgO-10mass%MnO System

45) W. Kim, D.J. Min, Y.S. Lee and J.H. Park: ISIJ Int., vol. 49, (2009), no. 12, pp. 1882-1888.

Electrochemical Method for Controlling the Interfacial Oxygen in Molten Fe with ZrO2 based

solid electrolyte

46) H. Kim, W.H. Kim, J.H. Park, and D.J. Min: Steel Res. Int., vol. 81, (2010), no. 1, pp. 17-24.

A Study on the effect of Na2O on the viscosity of ironmaking slags

47) M.K. Cho, J. Cheng, J.H. Park and D.J. Min: ISIJ Int., vol. 50, (2010), no. 2, pp. 215-221.

Hot Metal Desulfurization of CaO-SiO2-CaF2-Na2O Slag saturated with MgO

48) M.K. Cho, J.H. Park and D.J. Min: ISIJ Int., vol. 50, (2010), no. 2, pp. 324-326.

Phosphate Capacity of CaO-SiO2-MnO-FeO Slag saturated with MgO

49) M. Shin, S. Cho, J. Lee and J.H. Park: Met. Mater. Int., vol. 16, (2010), no. 3, pp. 495-499.

In-situ Observation of Dynamic Interfacial Phenomena between CaO-(SiO2 or Al2O3) slag

and Fe-11%Cr alloy near the MgO-6%C Refractory at 1823K

50) J.H. Park, G.H. Park and Y.E. Lee: ISIJ Int., vol. 50, (2010), no. 8, pp. 1078-1083.

Carbide Capacity of CaO-SiO2-MnO Slag for the Production of Manganese Alloys

51) J.H. Park and H. Todoroki: ISIJ Int., vol. 50, (2010), no. 10, pp. 1333-1346.

Control of MgOAl2O3 Spinel Inclusions in Stainless Steels – A review (review paper)

52) J.H. Park, M.O. Suk, I.H. Jung, M. Guo and B. Blanpain: Steel Res. Int., vol. 81, (2010), no.

10, pp. 860-868.

Interfacial reaction between refractory materials and metallurgical slags containing fluoride

(invited paper, Seetharaman Symposium special issue)

53) J. Lee, M. Shin, J.H. Park, and S. Seetharaman: Ironmaking & Steelmaking, vol. 37, (2010),

no. 7, pp. 512-515. (2010.10)

Studies of the Wetting Characteristics of Liquid Fe-Cr Alloys on Oxide Substrates by the

Sessile Drop Technique

54) J.H. Park, J.G. Park, D.J. Min, Y.E. Lee and Y.B. Kang: J. Eur. Ceram. Soc., vol. 30, (2010),

no. 15, pp. 3181-3186. (2010.11)

In Situ Observation of Dissolution Phenomena of SiC Particle in the CaO-SiO2-MnO Slag

55) J.H. Park: Met. Mater. Int., vol. 16, (2010), no. 6, pp. 987-992.

Effect of boron oxide on the crystallization behavior of MgAl2O4 spinel phase during cooling

of the CaO-SiO2-10wt%MgO-30wt%Al2O3 systems

56) S.H. Jeon, S.T. Kim, I.S. Lee, J.H. Park, K.T. Kim, J.S. Kim and Y.S. Park: Mater. Trans., vol.

52, (2011), no. 3, pp. 416-422.

Thermodynamics of inclusion formation and its influence on the corrosion behavior of Cu

bearing duplex stainless steels

57) S.H. Jeon, S.T. Kim, I.S. Lee, J.H. Park, K.T. Kim and Y.S. Park: Corros. Sci., vol. 53,

(2011), no. 4, pp. 1408-1416.

Effects of copper addition on the formation of inclusions and the resistance to pitting

corrosion of high performance duplex stainless steels

58) G.H. Park, Y.B. Kang and J.H. Park: ISIJ Int., vol. 51, (2011), no. 9, pp. 1375-1382.

Sulfide capacity of the CaO-SiO2-MnO slag at 1873 K

59) J.H. Park and H. Todoroki: J. Iron Steel Res. Int., vol. 18, (2011), suppl. 2, pp. 320-330.

Formation mechanism of MgOAl2O3 spinel inclusions in stainless steelmaking processes


Effect of inclusions on the solidification structures of ferritic stainless steel: Computational

and experimental study of inclusion evolution

61) J.H. Shin, J. Lee, D.J. Min, and J.H. Park: Metall. Mater. Trans. B, vol. 42B, (2011), no. 6,

pp. 1081-1085.

Solubility of Nitrogen in High Manganese Steel (HMnS) Melts: Interaction Parameter

between Mn and N

62) Y.B. Kang and J.H. Park: Metall. Mater. Trans. B, vol. 42B, (2011), no. 6, pp. 1211-1217.

On the dissolution behavior of sulfur in ternary silicate slags

63) K.Y. Ko and J.H. Park: Metall. Mater. Trans. B, vol. 42B, (2011), no. 6, pp. 1224-1230.

Dissolution Behavior of Indium in CaO-SiO2-Al2O3 Slag

64) J.H. Park, G.H. Park, D.J. Paik, Y. Huh and M.H. Hong: Metall. Mater. Trans. A, vol. 43A,

(2012), no. 1, pp. 195-207.

Influence of aluminum on the formation behavior of Zn-Al-Fe intermetallic particles in zinc

bath

65) J.H. Park, and G.H. Park: ISIJ Int., vol. 52, (2012), no. 5, pp. 764-769.

Sulfide capacity of the CaO-SiO2-MnO-Al2O3-MgO slags at 1873 K

66) D.J. Paik, M.H. Hong, Y. Huh, J.H. Park, H.G. Chae, S.H. Park, and S.Y. Choun: Metall.

Mater. Trans. A, vol. 43, (2012), no. 6, pp. 1934-1943.

Metastable Phases of Dross Particles Formed in a Molten Zinc Bath and Prediction of

Soluble Aluminum during Galvannealing Processes

67) K.Y. Ko and J.H. Park: Metall. Mater. Trans. B, vol. 43B, (2012), no. 3, pp. 440-442.

Dissolution Mechanism of Indium in CaO-Al2O3-SiO2 Slag at Low Silica Region

68) J.H. Park, D.J. Kim, and D.J. Min: Metall. Mater. Trans. A, vol. 43A, (2012), no. 7, pp. 2316-

2324.

Characterization of non metallic inclusions in high manganese and aluminum-alloyed

austenitic steels

69) D.J. Kim and J.H. Park: Metall. Mater. Trans. B, vol. 43B, (2012), no. 4, pp. 875-886.

Interfacial reaction between CaO-SiO2-Al2O3-MgO flux and Fe-xMn-yAl (x=10, 20 mass pct,

y=1, 3, 6 mass pct) steel melts at 1873 K

70) J.H. Park: ISIJ Int., vol. 52, (2012), no. 9, pp. 1627-1636.

Structure–Property Correlations of CaO-SiO2-MnO Slag derived from Raman Spectroscopy

71) J.H. Heo, S.S. Park and J.H. Park: Metall. Mater. Trans. B, vol. 43B, (2012), no. 5, pp.

1098-1105.

Effect of Slag Composition on the Distribution Behavior of Pb between FetO-SiO2(-CaO,

Al2O3) Slag and Molten Copper

72) J.H. Park: J. Non-Cryst. Solids, vol. 358, (2012), no. 23, pp. 3096-3102. (2012.12)

Composition-structure-property relationships of CaO-MO-SiO2 (M=Mg2+, Mn2+) systems

derived from micro-Raman spectroscopy

73) J.H. Shin and J.H. Park: Metall. Mater. Trans. B, vol. 43B, (2012), no. 6, pp. 1243-1246.

Thermodynamics of Reducing Refining of Phosphorous from Si-Mn Alloy using CaO-CaF2

Slag

74) J.S. Park, C. Lee, and J.H. Park: Metall. Mater. Trans. B, vol. 43B, (2012), no. 6, pp. 1550-

1564.

Effect of complex inclusion particles on the solidification structure of Fe-Ni-Mn-Mo alloy

75) J.H. Park: ISIJ Int., vol. 52, (2012), no. 12, pp. 2303-2304.

Sulfide Capacity and Excess Free Energy of CaO-SiO2-MnO Slag derived from Structural

Analysis of Raman Spectra

76) J. Lee, L.T. Hoai, J. Choe and J.H. Park: ISIJ Int., vol. 52, (2012), no. 12, pp. 2145-2148.

Density Measurements of CaO-MnO-SiO2 Slags

77) J.H. Shin and J.H. Park: ISIJ Int., vol. 53, (2013), no. 3, pp. 385-390.

Effect of atmosphere and slag composition on the evolution of PH3 gas during cooling of

reducing dephosphorization slags

78) Y.S. Lee, S.M. Jung, J.H. Park and D.J. Min: ISIJ Int., vol. 53, (2013), no. 3, pp. 547-549.

Morphologies of alumina nano- and microparticles at the Fe/Al2O3 interface and the effects

of reaction time and substrate roughness on size distribution

79) J.H. Park: Met. Mater. Int., vol. 19, (2013), no. 3, pp. 577-584.

Effect of silicate structure on thermodynamic properties of calcium silicate melts :

Quantitative analysis of Raman spectra

80) K.Y. Ko and J.H. Park: ISIJ Int., vol. 53, (2013), no. 6, pp. 958-965.

Effect of CaF2 addition on the viscosity and structure of CaO-SiO2-MnO slags

81) J.H. Park: Steel Res. Int., vol. 84, (2013), no. 7, pp. 664-669.

Competitive Dissolution Mechanism of Sulphur in Ca-Mn-Silicate Melts: Structural View

(invited paper, MOLTEN2012 special issue)

82) J.H. Park: Metall. Mater. Trans. B, vol. 44B, (2013), no. 4, pp. 938-947.

Structure-Property relationship of CaO-MgO-SiO2 system: Quantitative analysis of Raman

spectra (Marcus A Grossmann Awarded paper)

83) J.H. Heo, B.S. Kim and J.H. Park: Metall. Mater. Trans. B, vol. 44B, (2013), no. 6, pp. 1352-

1363.

Effect of CaO Addition on Iron Recovery from Copper Smelting Slags by Solid Carbon


Conversion of calcium phosphide to calcium phosphate in reducing dephosphorization slags

by oxygen injection

85) Y. Kang, J. Jang, J.H. Park and C. Lee: Met. Mater. Int., vol. 20, (2014), no. 1, pp. 119-127.

Influence of Ti on non-metallic inclusion phases and intragranular nucleation in high-strength

low-alloy steel weld metals

86) J.H. Shin, M.S. Choi, D.J. Min, and J.H. Park: Mater. Chem. Phys., vol. 143, (2014), no. 3,

pp. 1075-1081. (Feb. 2014)

Isothermal and non-isothermal sublimation kinetics of zirconium tetrachloride (ZrCl4) for

producing nuclear grade Zr

87) D. Kim, K. Han, B. Lee, J.H. Park and C. Lee: Metall. Mater. Trans. A, vol. 45A, (2014), no.

4, pp. 2046-2054.

Oxide formation mechanism in high manganese steel welds

88) J.S. Park and J.H. Park: Metall. Mater. Trans. B, vol. 45B, (2014), no. 3, pp. 953-960.

Effect of Slag Composition on the Concentration of Al2O3 in the Inclusions in Si-Mn-killed

Steel

89) J.S. Park and J.H. Park: Steel Res. Int., vol. 85, (2014), no. 8, pp. 1303-1309.

Effect of Mg-Ti deoxidation on the formation behaviour of equiaxed crystals during rapid

solidification of iron alloys (invited paper, ICS2012 special issue)

90) T.S. Kim and J.H. Park: ISIJ Int., vol. 54, (2014), no. 9, pp. 2031-2038.

Structure-Viscosity Relationship of Low-silica Calcium Aluminosilicate Melts (invited paper,

ATPC2013 special issue)

91) S.K. Kwon, Y.M. Kong, and J.H. Park: Met. Mater. Int., vol. 20, (2014), no. 5, pp. 959-966.

Effect of Al deoxidation on the formation behavior of inclusions in Ce-added stainless steel

melt

92) Y. Kang, K. Han, J.H. Park and C. Lee: Metall. Mater. Trans. A, vol. 45A, (2014), no. 11, pp.

4753-4757. (October)

Mn-depleted zone formation in the rapidly cooled high-strength low-alloy steel welds

93) Y.S. Han and J.H. Park: Metall. Mater. Trans. B, vol. 46B, (2015), no. 1, pp. 235-242.

Thermodynamics of Indium Dissolution Behavior in FeO-bearing Metallurgical Slags

94) J.H. Shin and J.H. Park: Fluid Phase Equilibria, (2015), vol. 389, pp. 4-8. (March).

Diffusion coefficient of gaseous zirconium tetrachloride (ZrCl4)

95) J.H. Park, K.Y. Ko and T.S. Kim: Metall. Mater. Trans. B, vol. 46B, (2015), no. 2, pp. 741-

748.

Influence of CaF2 on the viscosity and structure of manganese ferroalloys smelting slags

96) J.H. Heo, Y. Chung, and J.H. Park: Metall. Mater. Trans. B, vol. 46B, (2015), no. 3, pp.

1154-1161.

Effect of CaF2 addition on the silicothermic reduction of MnO in ferromanganese slag

97) J.S. Park, D.H. Kim and J.H. Park: J. Am. Ceram. Soc., vol. 98, (2015), no. 6, pp. 1974-

1981

Thermodynamic stability of spinel phase at the interface between alumina refractory and

CaO-SiO2-CaF2-MgO-Al2O3-MnO slags

98) Y. Kang, K. Han, J.H. Park and C. Lee: Metall. Mater. Trans. A, vol. 46A, (2015), no. 8, pp.

3581-3591.

Variation in the chemical driving force for intragranular nucleation in the weld metal during

multi-pass welding

99) S. Lee, E.J. Jung, J.H. Park and D.J. Min: J. Non-Cryst. Solids, vol. 429, (2015), pp. 54-60.

(December)

Influence of the oxygen partial pressure and the boron content on the behavior of boron in

calcium silicate melts

100) Y.S. Han, D.R. Swinbourne, and J.H. Park: Metall. Mater. Trans. B, vol. 46B, (2015), no. 6,

pp, 2449-2557.

Thermodynamics of gold dissolution behavior in CaO-SiO2-Al2O3-MgOsat Slag System

101) S.K. Kwon, J.S. Park, and J.H. Park: ISIJ Int., vol. 55, (2015), no. 12, pp. 2589-2596.

Influence of Refractory-Steel Interfacial Reaction on the Formation Behavior of Inclusion in

Ce-containing Stainless Steel Melt (Sawamura Awarded paper)

102) C.H. Eom, S.H. Lee, J.G. Park, J.H. Park and D.J. Min: ISIJ Int., vol. 56, (2016), no. 1, pp.

37-43.

Thermodynamic behavior of manganese oxide in lime-based manganese smelting slags

103) E.H. Jeong, C.W. Nam, K.H. Park and J.H. Park: Metall. Mater. Trans. B, vol. 47B, (2016),

no. 2, pp. 1103-1112.

Sulfurization of Fe-Ni-Cu-Co Alloy to Matte Phase by Carbothermic Reduction of Calcium

Sulfate

104) J.S. Park, J.H. Park, M.G. Lee, J.H. Sung, K.J. Cha and D.H. Kim: Metall. Mater. Trans. A,

vol. 47A, (2016), no. 5, pp. 2529-2535.

Effect of energy input on the characteristics of AISI H13 and D2 tool steels deposited by a

directed energy deposition process

105) J. Park, J.M. Jeon, K. Lee, J.H. Park and Y. Chung: Metall. Mater. Trans. B, vol. 47B,

(2016), no. 3, pp. 1832-1838.

Initial wetting and spreading rate between SiC and CaO-SiO2-MnO slag

106) J.H. Shin and J.H. Park: Metall. Mater. Trans. E, vol. 3E, (2016), no. 3, pp. 218-226.

Effect of halide flux on physicochemical properties of MgCl2–based molten salts for

accelerating zirconium production: Thermodynamic assessment

107) J.H. Heo, Y. Chung, and J.H. Park: J. Clean. Prod., (2016), vol. 137, pp. 777-787.

(November)

Recovery of iron and removal of heavy metals from waste copper slag via novel alumino-

thermic smelting reduction (ASR) process

108) J.S. Park and J.H. Park: Metall. Mater. Trans. B, vol. 47B, (2016), no. 6, pp. 3225-3230.

Effect of physicochemical properties of slag and flux on the removal rate of oxide inclusions

from molten steel

109) S. Lee, M.J. Kim, J. Lee, J.H. Park, S.H. Kang, S.J. Lee and Y. Yun: Mater. Testing, vol. 59

(2017), no. 1, pp. 16-21.

Corrosion behavior of welded Ni-Co-Cr-Si alloys during exposure in integrated coal

gasification combined cycle syngas plants

110) J.S. Park, D.H. Kim and J.H. Park: J. Alloys & Compd., vol. 695, (2017), pp. 476-481.

(February)

TEM characterization of a TiN-MgAl2O4 epitaxial interface

111) J.H. Shin, Y. Chung and J.H. Park: Metall. Mater. Trans. B, vol. 48B, (2017), no. 1, pp. 46-

59.

Refractory-Slag-Metal-Inclusion Multiphase Reactions Modeling using Computational

Thermodynamics: Kinetic Model for Prediction of Inclusion Evolution in Molten Steel

(Christopher W. Bale Symposium special issue)

112) S.J. Jeong, T.S. Kim and J.H. Park: Metall. Mater. Trans. B, vol. 48B, (2017), no. 1, pp.

545-553.

Relationship between sulfide capacity and structure of MnO-SiO2-Al2O3-Ce2O3 system

113) H.S. Park, M.C. Ha, M.S. Kim, J.H. Heo, and J.H. Park: Calphad, vol. 56, (2017), pp. 185-

195. (March)

Novel Design of Ferronickel Smelting Slag by Utilizing Red Mud as a Fluxing Agent:

Thermochemical Computations and Experimental Confirmation

114) S.M. Lee, S.K. Lee, D.J. Paik and J.H. Park: Metall. Mater. Trans. A, vol. 48A, (2017), no. 4,

pp. 1788-1796.

Effect of initial iron content in a zinc bath on the dissolution rate of solid iron during hot dip

galvanizing process

115) T.S. Kim, Y. Chung, L. Holappa and J.H. Park: Metall. Mater. Trans. B, vol. 48B, (2017), no.

3, pp. 1736-1747.

Effect of Rice Husk Insulation Powder on the Reoxidation Behavior of Molten Steel in

Continuous Casting Tundish

116) J.G. Kang, J.H. Shin, Y. Chung, and J.H. Park: Metall. Mater. Trans. B, vol. 48B, (2017), no.

4, pp. 2123-2135.

Effect of slag chemistry on desulfurization kinetics in secondary refining process

117) J.G. Yang and J.H. Park: Metall. Mater. Trans. B, vol. 48B, (2017), no. 4, pp. 2147-2156.

Distribution Behavior of Aluminum and Titanium between Nickel-based Alloys and Molten

Slags in Electro Slag Remelting (ESR) Process

118) J.H. Heo and J.H. Park: Calphad, vol. 58, (2017), pp. 219-228. (September)

Thermochemical analysis for the reduction behavior of FeO in EAF slag via aluminothermic

smelting reduction (ASR) process: Part I. Effect of aluminum on Fe & Mn recovery

119) J.H. Heo and J.H. Park: Calphad, vol. 58, (2017), pp. 229-238. (September)

Thermochemical analysis for the reduction behavior of FeO in EAF slag via aluminothermic

smelting reduction (ASR) process: Part II. Effect of aluminum dross and lime fluxing on Fe

and; Mn recovery

120) H.S. Park and J.H. Park: J. Non-Cryst. Solids, vol. 475 (2017), pp. 129-135. (November)

Vitrification of red mud with mine wastes through the melting and granulation process –

application to ceramic ball

121) J. Jeon, Y. Kang, J.H. Park, and Y. Chung: Ceram. Int., vol. 43 (2017), no. 17, pp. 15074-

15079. (December)

Corrosion-Erosion Behavior of MgAl2O4 Spinel Refractory in Contact with High MnO Slag

122) B.M. Moon, J.H. Seo, H.J. Lee, K.H. Jung, J.H. Park, and H.D. Jung: J. Alloys & Compd.,

vol. 727, (2017), pp. 931-939. (December)

Method of recycling titanium scrap via the electromagnetic cold crucible technique coupled

with calcium treatment


Modification of Inclusions in Molten Steel by Mg-Ca Transfer from Top Slag: Experimental

Confirmation of the 'Refractory-Slag-Metal-Inclusion (ReSMI)' Multiphase Reaction Model

124) J.H. Park and Y. Kang: Steel Res. Int., vol. 88, (2017), pp. 1700130 (1-26).

Inclusions in stainless steels – a review (invited review paper)


Effect of CaO/Al2O3 ratio of ladle slag on formation behavior of inclusions in Mn and V

alloyed steel


Formation mechanism of oxide-sulfide complex inclusions in high-sulfur containing steel

melts

127) S. Lee, M.J. Kim, J.H. Park, S.H. Hwang, S.W. Chung, S.J. Lee and Y. Yun: Mater. Testing,

vol. 60 (2018), no. 2, pp. 156-162.

Corrosion behavior of Hastelloy® C–4® Ni–Cr–Mo–Fe alloys for coal gasification syngas

plants

128) J.H. Shin and J.H. Park: J. Iron Steel Res. Int., vol. 25, (2018), no. 2, pp. 157-163.

Effect of CaF2 content in refining slag on formation behavior of spinel inclusion in Ni-Cr-V

alloyed special steel (invited paper, selected as Hot article)

129) J.H. Heo and J.H. Park: Metall. Mater. Trans. B, vol. 49B, (2018), no. 2, pp. 514-518.

Manganese Recovery by Silicothermic Reduction of MnO in BaO-MnO-MgO-CaF2 (-SiO2)

Slag

130) M.H. Lee and J.H. Park: Metall. Mater. Trans. B, vol. 49B, (2018), no. 3, pp. 877-893.

Synergistic effect of nitrogen and refractory material on TiN formation and equiaxed grain

structure of ferritic stainless steel (IMPROWYS2017 special issue)

131) J.H. Heo, E.H. Jeong, C.W. Nam, K.H. Park and J.H. Park: Metall. Mater. Trans. B, vol. 49B,

(2018), no. 3, pp. 939-943.

Use of Industrial Waste (Al-Dross, Red mud, Mill scale) as Fluxing Agents in the Sulfurization

of Fe-Ni-Cu-Co Alloy by Carbothermic Reduction of Calcium Sulfate

132) J.S. Han, J.G. Kang, J.H. Shin, Y. Chung and J.H. Park: Ceram. Int., vol. 44, (2018), no. 11,

pp. 13197-13204. (August)

Influence of CaF2 in calcium aluminate based slag on degradation of magnesia refractory

133) N. Choi, K.R. Lim, Y.S. Na, U. Glatzel and J.H. Park: J. Alloys & Compd., vol. 763, (2018),

pp. 546-557. (September)

Characterization of non-metallic inclusions and their influence on the mechanical properties

of a FCC single-phase high-entropy alloy

134) Y. Lee, J.G. Yang, and J.H. Park: Calphad, vol. 62, (2018), pp. 232-237. (September)

Thermodynamics of Fluoride-based Molten Fluxes for Extraction of Magnesium through Low

Temperature Solid Oxide Membrane (LT-SOM) Process

135) J.H. Heo and J.H. Park: Metall. Mater. Trans. B, vol. 49B, (2018), no. 6, pp. 3381-3389.

Effect of Direct Reduced Iron (DRI) on Dephosphorization of Molten Steel by Electric Arc

Furnace Slag (selected as 2018 Metall. Mater. Trans. 2018 Editor’s Choice)

136) J.H. Heo, J.S. Yoo, Y. Chung and J.H. Park: Metall. Mater. Trans. B, vol. 50B, (2019), no. 2,

pp. 903-913.

Influence of Aluminum-Carbon Composite Pellet on FeO Reduction and Iron Recovery from

Electric Arc Furnace Slag

137) M.H. Lee, R. Kim, and J.H. Park: Sci. Rep., vol. 9, (2019), article no. 6369, pp. 1-11. (April)

Effect of nitrogen on grain growth and formability of Ti-stabilized ferritic stainless steel

138) J.S. Han, J.H. Heo, and J.H. Park: Ceram. Int., vol. 45, (2019), no. 8, pp. 10481-10491.

(June)

Interfacial reaction between magnesia refractory and “FeO”-rich slag: Formation of

magnesiowüstitie protective layer

139) J.H. Heo, J.W. Cho, H.S. Park and J.H. Park: J. Clean. Prod., vol. 225, (2019), pp. 743-754.

(July)

Crystallization and vitrification behavior of CaO-SiO2-FetO-Al2O3 slag: Fundamentals to use

mineral wastes in production of glass ball

140) C. Shi and J.H. Park: Metall. Mater. Trans. B, vol. 50B, (2019), no. 3, pp. 1139-1147.

Evolution of Oxide Inclusions in Si-Mn-Killed Steel during Electroslag Remelting under

Protective Atmosphere

141) T.S. Kim and J.H. Park: J. Am. Ceramic. Soc., vol. 102, (2019), accepted, in press.

Viscosity-structure relationship of alkaline earth silicate melts containing manganese oxide

and calcium fluoride (DOI: 10.1111/jace.16363)

142) J.S. Han, Y. Chung and J.H. Park: Met. Mater. Int., (2019), accepted, in press.

Influence of exposure temperature on degradation of magnesia refractory by steel refining

slags (DOI: 10.1007/s12540-019-00286-3)

143) D.H. Kim, J.H. Heo, H.S. Park and J.H. Park: Metall. Mater. Trans. B, vol. 50B, (2019),

accepted, in press.

Influence of temperature on reaction mechanism of ilmenite ore smelting (DOI:

10.1007/s11663-019-01604-1)

144) T.S. Kim, S.J. Jeong and J.H. Park: J. Am. Ceram. Soc., (2019), to be published

Structural analysis of a Ce-doped Mn-aluminosilicate system via various spectroscopic

methods

145) Y. Lee, J.G. Yang, D.J. Min and J.H. Park: Ceram. Int., (2019), to be published.

Mechanism of MgO dissolution in MgF2-CaF2-MF (M=Li or Na) melts: Kinetic analysis via in-

situ high temperature confocal scanning laser microscopy (HT-CSLM)

146) H.S. Park, Y.J. Kim, Y.S. Han and J.H. Park: J. Clean Prod., (2019), to be published.

Massive pyrolysis of waste mobile phones and pyrometallurgical treatment of insoluble

residues

147) J.H. Heo and J.H. Park: Metall. Mater. Trans. B, vol. 50B, (2019), to be published.

Assessment of Physicochemical Properties of Electrical Arc Furnace Slag and their Effects

on Foamability

148) D.E. Jodi, N. Choi, J.H. Park and N. Park: Mater. Sci. Eng. A, (2019), to be published.

A Practical Design of CoCrNi Compositionally Complex Alloy by Nitrogen Addition with

Exceptional Mechanical Properties

149) L. Krajnc, J. Medved, J. Burja, and J.H. Park: Met. Mater. Int., (2019), to be published.

Formation Behavior of Spinel-CaS Inclusions in Ca-Treated Resulfurized Steel during Ladle

Furnace Process

150) D.E. Jodi, N. Park and J.H. Park: J. Alloys & Compd., (2019), to be published.

The Formation of Cr2N Precipitate on N-CoCrNi Compositionally Complex Alloy

Conference proceedings (International)

1) J.H. Park and D.J. Min: CAMP-ISIJ, vol. 12, (1999), no. 4, p. 791, 138th ISIJ Meeting, 20-22

Nov. 1999, Kanazawa, JAPAN

Thermodynamic Behavior of Carbon in Molten Slags (invited paper)

2) J.H. Park and D.J. Min: Proc. 6th Int. Conf. on Molten Slags, Fluxes, and Salts, (2000), CD-

ROM paper 030, 6th Int. Conf. on Molten Slags, Fluxes, and Salts, 12-17 Jun. 2000, Stockholm,

SWEDEN / Helsinki, FINLAND

Solubility of Silver in Molten Slags as a Measure of Basicity

3) J.H. Park and D.J. Min: Proc. Int. Cong. on Minerals Process. Extract. Metall. [MINPREX

2000], (2000), pp. 439-444, MINPREX 2000, 11-13 Sep. 2000, Melbourne, AUSTRALIA

Dissolution Mechanism of Silver in Molten Slags

4) J.H. Park, S.M. Moon, and D.J. Min: Proc. 2nd Int. Cong. on Sci. and Technol. Steelmaking

[ICS 2001], (2001), pp. 175-183, ICS 2001, 10-11 Apr. 2001, Wales, UK

Thermodynamic behavior of tramp elements in CaO based slags

5) J.H. Park, D.J. Min, H.S. Song, and Y.D. Lee: 85th Steelmaking Conf. Proc., (2002), pp. 775-

786, 85th ISS Steelmaking Conf., 10-13 Mar. 2002, Nashville, TN, USA

Influence of CaF2 on Viscosity and Structure of Molten Slags

6) Y.S. Lee, J.H. Park, D.J. Min, S.H. Yi, and W.W. Huh: 61st Ironmaking Conf. Proc., (2002), pp.

155-165, 61st ISS Ironmaking Conf., 10-13 Mar. 2002, Nashville, TN, USA

Modeling the Viscosity of Blast Furnace Slags containing FeO

7) J.H. Park, Y.S. Lee, and D.J. Min: Proc. 1st Kor.-Jpn. Workshop on Sci. and Technol. in

Ironmaking and Steelmaking, (2003), pp. 43-47, 1st Korea-Japan Workshop on Science &

Technology in Ironmaking & Steelmaking, 30-31 Mar. 2003, Chiba, JAPAN

Effect of CaF2 on Carbon Dissolution Behavior in CaO-Al2O3-CaF2 Slag

8) D.S. Kim, J.H. Park, Jong H. Park, S.B. Lee, and H.G. Lee: Rev. de Metall. - ATS, (2003), pp.

100-101, 24th Int. ATS Steelmaking Conf., 10-11 Dec. 2003, Paris, FRANCE

Improvement of Cleanliness of 16%Cr-containing Ferritic Stainless Steel in AOD Processes

9) J.H. Park, D.S. Kim, Y.D. Lee, H.S. Song, and D.J. Min: Proc. 7th Int. Conf. on Molten Slags,

Fluxes, and Salts, (2004), pp. 157-164, 7th Int. Conf. Molten Slags, Fluxes, and Salts, 25-28

Jan. 2004, Cape Town, SOUTH AFRICA

The viscosities and structures of calcium silicate slags containing MgO, CaF2, and Al2O3

10) J.H. Park, D.S. Kim, S.B. Lee, and Y.Y. Lee: Proc. 3rd Int. Cong. on Sci. and Technol. of

Steelmaking [ICS 2005], (2005), pp. 221-231, ICS 2005, 9-12 May. 2005, Charlotte, NC, USA

Inclusion Control of Fe-16%Cr Stainless Steel Melts by Aluminum Deoxidation and Calcium

Treatment

11) J.H. Park and Y.Y. Lee: Proc. Sohn Int. Symp., (2006), pp. 405-420, Sohn Int. Symp., 27-31

Aug. 2006, San Diego, CA, USA

Formation of Spinel Phase in the Liquid Inclusions during Stainless Steelmaking Processes

(keynote paper)

12) J.O. Jo, J.B. Lee, S.I. Kim, T.I. Chung, J.J. Pak, J.H. Park, and D.S. Kim: Proc. Sohn Int.

Symp., (2006), pp. 185-198, Sohn Int. Symp., 27-31 Aug. 2006, San Diego, CA, USA

Thermodynamics of Titanium, Nitrogen and Oxygen in Liquid Stainless Steels

13) J.H. Park and Y.Y. Lee: Proc. 4th Kor.-Jpn. Workshop on Sci. and Technol. in Ironmaking

and Steelmaking, (2006), p. 53, 4th Korea-Japan Workshop on Science & Technology in

Ironmaking & Steelmaking, 26-28 Oct. 2006, Jeju, KOREA

Thermodynamics of Inclusion Formation in High Silicon Austenitic Stainless Steel Melts

14) D.S. Kim, J.H. Park, J.J. Kim, and K.S. Lee: AISTech2007 Proc., (2007), CD-ROM Paper No.

101, AISTech2007 Conference, 7-10 May 2007, Indianapolis, IND, USA

Development of Alloy Addition Apparatus for the Reduction of Melt Reoxidation in Stainless

Steelmaking Ladle at POSCO

15) J.H. Park: Euro. Cong. on Adv. Mater. Process. [EUROMAT 2007], 10-13 Sep. 2007,

Nürnberg, GERMANY

Formation of Calcium Zirconate Compound in Stainless Steel Slags containing ZrO2

16) S.M. Han, J.H. Park, Jung H. Park, J.M. Park, and D.J. Min: Proc. Phys. Chem. Steel

Refining Symp. of 28th Int. ATS Steelmaking Conf., (2007), pp. 60-66, 28th Int. ATS

Steelmaking Conf., 13-14 Dec. 2007, Paris, FRANCE

A kinetic study of controlling nitrogen in process for boron steel by using 30N2 isotope gas

17) S.Y. Cho, W. Li, J. Lee, and J.H. Park: Proc. Phys. Chem. Steel Refining Symp. of 28th Int.

ATS Steelmaking Conf., (2007), pp. 67-88, 28th Int. ATS Steelmaking Conf., 13-14 Dec. 2007,

Paris, FRANCE

Interfacial Phenomena at Slag-Metal-Refractory Interfaces

18) S.B. Lee, S.M. Byun, J.H. Park, M.O. Suk, J.A.T. Jones, and D.I. Walker: Proc. 3rd Int. Conf.

on Process Develop. in Iron & Steelmaking [SCANMET III], vol. 1, (2008), pp. 131-140,

SCANMET III, 8-11 June. 2008, Luleå, SWEDEN

Effect of bottom bubbling on decarburization rate in VOD process

19) M.O. Suk and J.H. Park: CAMP-ISIJ, vol. 21, (2008), p. 914, 156th ISIJ Meeting, 23-25 Sep.

2008, Kumamoto, JAPAN

Effect of CaF2 on the melting behavior of slag and refractory corrosion

20) J.H. Park, D.J. Min and Y. Sasaki: Proc. 4th Int. Cong. on Sci. & Technol. of Steelmaking

[ICS 2008], (2008), pp. 570-574, ICS 2008, 6-8 October. 2008, Gifu, JAPAN

Structural Assessment of Fluorine in Calcium Silicates: Focusing on the Viscosity of CaO-

SiO2-CaF2 System

21) J. Lee, E. Kim, S. Cho and J.H. Park: Proc. 4th Int. Cong. on Sci. & Technol. of Steelmaking

[ICS 2008], (2008), pp. 330-332, ICS 2008, 6-8 October. 2008, Gifu, JAPAN

Carbon pickup from MgO-C refractory at slag-metal-refractory interface

22) J.G. Park, H. Kim, J.H. Park and D.J. Min: Proc. 4th Int. Cong. on Sci. & Technol. of

Steelmaking [ICS 2008], (2008), pp. 522-525, ICS 2008, 6-8 October. 2008, Gifu, JAPAN

Thermodynamics of Copper Dissolution into MnO-SiO2-MnS Inclusion System

23) J.O. Jo, C.O. Lee, W.Y. Kim, M. Bahgat, J.H. Park, and J.J. Pak: Proc. 4th Int. Cong. on Sci.

& Technol. of Steelmaking [ICS 2008], (2008), pp. 554-557, ICS 2008, 6-8 October. 2008,

Gifu, JAPAN

Thermodynamic Relation between Aluminum and Chromium in Liquid Iron

24) C.O. Lee, W.Y. Kim, B.H. Kim, D.S. Kim, J.H. Park, and J.J. Pak: Proc. 4th Int. Cong. on Sci.

& Technol. of Steelmaking [ICS 2008], (2008), pp. 558-561, ICS 2008, 6-8 October. 2008,

Gifu, JAPAN

Thermodynamic Relations between Chromium, Titanium and Nitrogen in Liquid Iron

25) J.H. Park, S.B. Lee, and H.R. Gaye: Proc. 8th Int. Conf. on Molten Slags, Fluxes, and Salts

[MOLTEN 2009], (2009), pp. 267-274, MOLTEN 2009, 18-21 Jan. 2009, Santiago, CHILE

Thermodynamic impact of molten slags on the formation behavior of MgO-Al2O3-TiOx

inclusion in steel melts

26) H. Kim, Y.S. Lee, J.H. Park, and D.J. Min: Proc. 8th Int. Conf. on Molten Slags, Fluxes, and

Salts [MOLTEN 2009], (2009), pp. 247-255, MOLTEN 2009, 18-21 Jan. 2009, Santiago,

CHILE

The viscous behavior of high alumina containing blast furnace type slags

27) J. Lee, M. Shin, and J.H. Park: Proc. 8th Int. Conf. on Molten Slags, Fluxes, and Salts

[MOLTEN 2009], (2009), pp. 933-937, MOLTEN 2009, 18-21 Jan. 2009, Santiago, CHILE

Investigation of the wetting characteristics of liquid Fe-18%Cr-10%Ni alloys on the alumina and

dolomite substrates at 1873 K

28) J.H. Park and M.O. Suk: Proc. 6th Int. Conf. on High Temp. Capillarity [HTC 2009], (2009), p.

78, HTC 2009, 6-9 May 2009, Athens, GREECE

Interfacial reaction between metallurgical slags containing fluorspar and zirconia refractory

29) J.H. Park and S.B. Lee: Proc. 4th Asia Steel Int. Conf. [ASIA STEEL 2009], (2009), CD-ROM

paper no. S3-15, ASIA STEEL 2009, 24-27 May 2009, Busan, KOREA

Thermodynamics on the formation of inclusions containing MgAl2O4 spinel phase during

steelmaking processes

30) D.S. Kim, J.H. Park, J.J. Kim, S.B. Lee and K.S. Lee: Proc. 4th Asia Steel Int. Conf. [ASIA

STEEL 2009], (2009), CD-ROM paper no. S3-34, ASIA STEEL 2009, 24-27 May 2009, Busan,

KOREA

Development of ACASIA for Alloy Addition in Stainless Steelmaking Ladle (invited paper)

31) H. Kim, Y.S. Lee, J.H. Park and D.J. Min: Proc. 4th Asia Steel Int. Conf. [ASIA STEEL 2009],

(2009), CD-ROM paper no. S2-13, ASIA STEEL 2009, 24-27 May 2009, Busan, KOREA

The Viscous Behavior and Structure of Blast Furnace Type Slags

32) H. Kim, Y.S. Lee, J.H. Park and D.J. Min: Proc. 4th Asia Steel Int. Conf. [ASIA STEEL 2009],

(2009), CD-ROM paper no. S2-14, ASIA STEEL 2009, 24-27 May 2009, Busan, KOREA

Influence of Na2O Content on Viscosity of Blast Furnace Type Slags

33) J.H. Park: Euro. Cong. on Adv. Mater. Process. [EUROMAT 2009], 7-10 Sep. 2009,

Glasgow, UK

Effect of calcium aluminate slags on the formation behaviour of MgO-Al2O3 inclusion in ferritic

stainless steel melts

34) M. Shin, J. Lee and J.H. Park: Euro. Cong. on Adv. Mater. Process. [EUROMAT 2009], 7-10

Sep. 2009, Glasgow, UK

Dynamic wetting of alumina and dolomite substrates by Fe-19%Cr-10%Ni alloys

35) J.H. Park, S.B. Lee and H.R. Gaye: Proc. 6th Kor.-Jpn. Workshop on Sci. and Technol. in

Ironmaking and Steelmaking, (2010), pp. 84-93, 6th Korea-Japan Workshop on Science &

Technology in Ironmaking & Steelmaking, 7-9 Jan. 2010, Seoul, KOREA

Thermodynamics of TiO2 in MgO saturated slags and its influence on the inclusion formation in

STS409L

36) J.H. Park: Proc. 39th CALPHAD Meeting [CALPHAD XXXIX], (2010), p. 127, CALPHAD

XXXIX, 23-28 May. 2010, Jeju, KOREA

Applications of Computational Thermodynamics on the Phase Equilibria of Complex Oxide

Systems for Slags and Inclusions in Metallurgical Industries

37) H. Kim, Y.S. Lee, J.H. Park and D.J. Min: Proc. HINO Symposium, (2010), pp. 93-98, HINO

Symposium, 23-25 May 2010, Tokyo, JAPAN

Viscous Behavior of Slag with respect to Slag Structure

38) J.H. Park, G.H. Park, C.I. Park, J.G. Park, D.J. Min, H.C. Jo and Y.E. Lee: Proc. 12th Int. Ferro

Alloy Cong. [INFACON XII 2010], vol. II, (2010), pp. 601-610, INFACON XII 2010, 6-9 Jun.

2010, Helsinki, FINLAND

Thermodynamics of Carbon Removal by Molten Slags from Manganese Alloy Melts

39) J.H. Park, M.O. Suk and I.H. Jung: Proc. Seetharaman Seminar, (2010), p. 18, Seetharaman

Seminar, 14-15 Jun. 2010, Sigtuna, SWEDEN

Interfacial reaction between refractory materials and metallurgical slags containing fluoride

40) J.H. Park, D.J. Kim and D.J. Min: CAMP-ISIJ, vol. 23, (2010), p. 921, 160th ISIJ Meeting, 25-27

Sep. 2010, Hokkaido, JAPAN

Effect of aluminum alloying on the formation behavior of inclusions in high Mn steel melts

41) C.I. Park and J.H. Park: Proc. Mater. Sci. & Technol. [MS&T2010], (2010), pp. 167-178,

MS&T2010, 17-21 Oct. 2010, Houston, USA

Relationship between discrete anionic structures and physicochemical properties of CaO-SiO2-

MnO glass

42) J.H. Park, G.H. Park, and D.J. Paik: Proc. Mater. Sci. & Technol. [MS&T2010], (2010), pp.

1304-1315, MS&T2010, 17-21 Oct. 2010, Houston, USA

Effect of aluminum content on the evolution of dross in hot dip galvanizing bath

43) J.S. Park, D.J. Kim and J.H. Park: 5th Int. Forum on Strategic Technol. [IFOST 2010], 13-15

Oct. 2010, Ulsan, KOREA

Effect of oxide particles on the solidification structure of advanced high strength steel (best

poster award)

44) J.H. Park and C.I. Park: Proc. 7th Kor.-Jpn. Workshop on Sci. and Technol. in

Ironmaking and Steelmaking, (2011), pp. 121-129, 7th Korea-Japan Workshop on Science

& Technology in Ironmaking & Steelmaking, 6-8 Jan. 2011, Kumamoto, JAPAN

Quantitative analysis of discrete anionic structure of silicates using Raman spectroscopy

45) J.H. Park and D.J. Min: CAMP-ISIJ, vol. 24, (2011), pp. 476-479, 161th ISIJ Meeting, 25-27

Mar. 2011, Tokyo, JAPAN

In-situ observation of slag/refractory reaction at high temperatures

46) J.H. Park, D.J. Kim, J.H. Shin and D.J. Min: Proc. 1st Int. Conf. on High Manganese Steels

[HMnS2011], (2011), p. 126, HMnS2011, 15-18 May 2011, Seoul, KOREA

Formation Behavior of Inclusions in High Manganese Steels deoxidized by Al

47) J.H. Park, C.I. Park, Y. Sasaki and K.C. Mills: Proc. FRUEHAN Symposium, (2011),

Richard J. Fruehan Symposium, 1-2 Jun. 2011, Pittsburgh, USA

Application of Raman Spectra to the Structure of Silicate Melts: Relationship between

Structure and Physicochemical Properties of Molten Slags

48) D.J. Paik, S.H. Park, S.Y. Choun, M.H. Hong, Y. Huh, J.H. Park, and H.G. Chae: Proc. 8th

Int. Conf. on Zn & Zn Alloy Coated Steel Sheet [GALVATECH2011], (2011), CD-ROM

paper in HDG Process Technology – Dross session, GALVATECH2011, 22-25 Jun. 2011,

Genova, ITALY

Effects of metastable dross particles formed in molten zinc bath and prediction of effective

aluminum during galvannealing processes

49) J.H. Park: Proc. 7th Eur. Continuous Casting Conf. [ECCC2011], (2011), CD-ROM paper

(session 12), ECCC2011, 27 Jun.-1 Jul. 2011, Düsseldorf, GERMANY

Formation of equiaxed structure of ferritic stainless steels by non metallic compounds

50) J.H. Park and H. Todoroki: Proc. 2nd Int. Symp. on Clean Steel [ISCS2011], (2011), pp.

320-330, ISCS2011, 23-26 Aug. 2011, Shenyang, CHINA

Formation Mechanism of MgOAl2O3 Spinel Inclusions in Stainless Steelmaking Processes

51) J.H. Park: Euro. Cong. on Adv. Mater. Process. [EUROMAT 2011], (2011), CD-ROM

paper (C52-O-2-1), 12-15 Sep. 2011, Montpellier, FRANCE

Grain refinement of solidification structure of steels using inclusion particles

52) Y.B. Kang and J.H. Park: Euro. Cong. on Adv. Mater. Process. [EUROMAT 2011], (2011),

CD-ROM paper (C52-O-1-6), 12-15 Sep. 2011, Montpellier, FRANCE

Dissolution behavior of sulfur in ternary silicate slags

53) Y.B. Kang and J.H. Park: CAMP-ISIJ, vol. 24, (2011), p. 765, 162th ISIJ Meeting, 20-22 Sep.

2011, Osaka, JAPAN

Dissolution behavior of sulfur in ternary silicate slags

54) J.H. Park and G.H. Park: Proc. Fray Int. Symp., (2011), vol. 2, pp. 359-372, Derek Fray

International Symposium, 27 Nov.-1 Dec. 2011, Cancun, MEXICO

Sulfide Capacity of MnO-containing Slags measured by Gas-Slag Equilibration Method at

1873K (keynote paper)

55) K.Y. Ko, and J.H. Park: Proc. Fray Int. Symp., (2011), vol. 1, pp. 287-298, Derek Fray

International Symposium, 27 Nov.-1 Dec. 2011, Cancun, MEXICO

Dissolution Mechanism of Indium in Molten CaO-SiO2-Al2O3 Slag (keynote paper)

56) J.S. Park, C.H. Lee, and J.H. Park: Proc. Int. Welding-Joining Conf. Korea [IWJC–Korea

2012], (2012), p. 107, IWJC–Korea 2012, 8-11 May 2012, Jeju, Korea.

Effect of complex inclusions on the solidification structure of iron alloy

57) J.H. Park and D.J. Kim: Proc. 8th Int. Conf. on Clean Steel [Clean Steel VIII], (2012), CD-

ROM paper (Slag-Flux-Refractory Section), Clean Steel VIII, 14-16 May 2012, Budapest,

HUNGARY.

Interfacial reaction between calcium silicate base flux and high manganese and aluminum

alloyed steels

58) J.H. Park and G.H. Park: Proc. 9th Int. Conf. on Molten Slags, Fluxes, and Salts

[MOLTEN 2012], (2012), CD-ROM paper, MOLTEN 2012, 27-30 May. 2012, Beijing, CHINA

Sulfide capacity of molten CaO-SiO2-MnO-Al2O3-MgO slags

59) K.Y. Ko and J.H. Park: Proc. 9th Int. Conf. on Molten Slags, Fluxes, and Salts [MOLTEN

2012], (2012), CD-ROM paper, MOLTEN 2012, 27-30 May. 2012, Beijing, CHINA

Thermodynamics of indium dissolution in molten CaO-base slags

60) J.H. Heo, S.S. Park and J.H. Park: Proc. 9th Int. Conf. on Molten Slags, Fluxes, and Salts

[MOLTEN 2012], (2012), CD-ROM paper, MOLTEN 2012, 27-30 May. 2012, Beijing, CHINA

Effect of slag composition on the distribution behavior of Pb between molten FetO-SiO2(-

Al2O3,CaO) slags and copper

61) J.H. Shin and J.H. Park: Proc. 9th Int. Conf. on Molten Slags, Fluxes, and Salts [MOLTEN

2012], (2012), CD-ROM paper, MOLTEN 2012, 27-30 May. 2012, Beijing, CHINA

Reducing dephosphorization of SiMn alloy by molten CaO-CaF2 flux and thermodynamic

stability of Ca3P2 under atmospheric cooling conditions

62) J. Lee, L.T. Hoai, J. Choe and J.H. Park: Proc. 9th Int. Conf. on Molten Slags, Fluxes, and

Salts [MOLTEN 2012], (2012), CD-ROM paper, MOLTEN 2012, 27-30 May. 2012, Beijing,

CHINA

Density of molten CaO-MnO-SiO2 slag

63) M.K. Paek, K.H. Do, Y.B. Kang, J.H. Park and J.J. Pak: Proc. Clean Steel in Future; Hae-

Geon LEE Symposium, (2012), pp. 106-120, HAE-GEON LEE Symposium, 31 May - 1

June 2012, Pohang, KOREA

Inclusion Thermodynamics for High-Al High-Mn Advanced High Strength Steels (invited

paper)

64) J.S. Park, C.H. Lee and J.H. Park: Proc. Int. Union of Mater. Res. Soc. – Int. Conf. in Asia

[IUMRS-ICA 2012], (2012), p. 54, IUMRS-ICA 2012, 26-31 August. 2012, Busan, KOREA

Effect of inclusion particles on the solidification structure of Fe-Ni-Mn-Mo steel

65) S.K. Kwon, S.T. Kim, and J.H. Park: Proc. Int. Union of Mater. Res. Soc. – Int. Conf. in

Asia [IUMRS-ICA 2012], (2012), p. 85, IUMRS-ICA 2012, 26-31 August. 2012, Busan,

KOREA

Formation behavior of inclusions in cerium added stainless steel

66) K.Y. Ko and J.H. Park: Proc. Int. Union of Mater. Res. Soc. – Int. Conf. in Asia [IUMRS-

ICA 2012], (2012), p. 49, IUMRS-ICA 2012, 26-31 August. 2012, Busan, KOREA

Thermodynamics of Indium recovery in the pyrometallurgical processing of electronic wastes

67) J.H. Shin and J.H. Park: Proc. Int. Union of Mater. Res. Soc. – Int. Conf. in Asia [IUMRS-

ICA 2012], (2012), p. 49, IUMRS-ICA 2012, 26-31 August. 2012, Busan, KOREA

Eco-processing technology of refining slags containing Ca3P2 in view of hazardous PH3

evolution

68) J.H. Park: Proc. 8th Kor.-Jpn. Workshop on Sci. and Technol. in Ironmaking and

Steelmaking, (2012), pp. 157-176, 8th Korea-Japan Workshop on Science & Technology in

Ironmaking & Steelmaking, 3-5 September, 2012, Jeju, KOREA

High Temperature Physical Chemistry of Slags and Refining Reactions for the Production of

High Mn Steels and Ferroalloys

69) J.H. Park and D.J. Paik: Proc. Discussion Meeting on Thermodynamics of Alloys [TOFA

2012], (2012), p. 55, TOFA 2012, 23-28 September. 2012, Pula, CROATIA

Thermodynamics of the formation of Zn-Al-Fe intermetallic compounds in molten zinc bath

70) J.H. Park and D.J. Kim: Proc. 5th Int. Cong. on Sci. & Technol. of Steelmaking [ICS 2012],

(2012), p. 165, ICS 2012, 1-3 October. 2012, Dresden, GERMANY

Formation of inclusions in High Mn-Al steels (HiMAS) and the reaction between calcium

silicate slag and HiMAS melts

71) J.H. Park, J.S. Park and C.H. Lee: Proc. 5th Int. Cong. on Sci. & Technol. of Steelmaking

[ICS 2012], (2012), p. 51, ICS 2012, 1-3 October. 2012, Dresden, GERMANY

Effect of complex deoxidation on the solidification structure of Ni-Mn-Mo alloyed steel

72) J. Lee and J.H. Park: Proc. 5th Int. Cong. on Sci. & Technol. of Steelmaking [ICS 2012],

(2012), p. 110, ICS 2012, 1-3 October. 2012, Dresden, GERMANY

Measurements of thermophysical properties of molten alloys and slags for refining and

casting of high manganese steels

73) J.H. Park: Proc. 12th Int. Mitsubishi Family Meeting, (2012), 12th International Mitsubishi

Family Meeting, 20-21 Nov. 2012, Busan, KOREA

Effect of slag composition on the distribution ratio of Pb between FetO-SiO2(-CaO, Al2O3)

slag and molten copper (invited lecture)

74) J.H. Park and K.Y. Ko: Proc. MRS Fall Meeting, (2012), p. 155, MRS-Fall 2012, 25-30 Nov.

2012, Boston, USA

Thermochemistry of Indium recovery in the pyrometallurgical recycling technology

75) J.H. Park and S.K. Kwon: Proc. AISTech2013, (2013), pp. 1285-1292, AISTech2013, 6-9

May 2013, Pittsburgh, USA

Effect of Ce addition on the formation behavior of inclusions in stainless steel melts

76) J.H. Park and J.S. Park: Proc. 5th Baosteel Biennial Academic Conf. [BAC2013], (2013),

CD-ROM paper B-347, BAC2013, 4-6 June 2013, Shanghai, CHINA (keynote lecture)

Influence of inclusion particles on the solidification structure of iron alloys

77) J.H. Park: Proc. 13th Int. Ferro Alloy Cong. [INFACON XIII 2013], (2013), pp. 585-594,

INFACON XIII 2013, 9-12 Jun. 2013, Almaty, KAZAKHSTAN

Physicochemical properties of MnO-based slags for the production of manganese ferroalloys

– a review

78) J.H. Heo, S.D. Jeon, S.C. Shim and J.H. Park: Proc. 13th Int. Ferro Alloy Cong. [INFACON

XIII 2013], (2013), pp. 567-573, INFACON XIII 2013, 9-12 Jun. 2013, Almaty, KAZAKHSTAN

Effect of CaF2 on the reduction rate of MnO in CaO-SiO2-MnO Slag by Si-Mn melt

79) J.H. Shin and J.H. Park: Proc. 13th Int. Ferro Alloy Cong. [INFACON XIII 2013], (2013), pp.

575-584, INFACON XIII 2013, 9-12 Jun. 2013, Almaty, KAZAKHSTAN

Reducing dephosphorization of SiMn alloy by molten CaO-CaF2 flux and thermodynamic

stability of Ca3P2 under atmospheric cooling conditions

80) J.H. Park: Proc. 12th Int. Conf. on Struct. of Non-Cryst. Mater. [NCM12], (2013), p. 73,

NCM 12, 7-12 Jul. 2013, Trento, ITALY

Structure-Property Relationships of CaO-SiO2-MO (M=Mn2+, Mg2+) Oxide Melts derived

from micro-Raman Spectroscopy

81) J.S. Park, C. Lee and J.H. Park: Proc. 8th Pacific Rim Int. Conf. on Adv. Mater. Process.

[PRICM 8], (2013), pp. 657-663, PRICM 8, 4-9 Aug. 2013, Hawaii, USA

Formation of equiaxed crystals by complex inclusions and fluxes during solidification of

advanced high strength steel

82) T.S. Kim and J.H. Park: Proc. ATPC 10th Asian Thermophysical Properties Conf.

[ATPC2013], (2013), ATPC2013, 29 Sep. – 3 Oct. 2013, Jeju, KOREA

Viscosity of Low Silica Calcium Aluminosilicate Melts and Structural Analysis using Raman

Spectroscopy

83) J.H. Park: 3rd Int. Sustainability Symp. - ‘Innovative Waste Recycling and Energy

Efficiency Solutions', (2013), p. 9, SMaRT Sustainability Symposium @ UNSW, 3-4 Oct.

2013, Sydney, AUSTRALIA

Effect of slag composition on the recovery of iron from waste Cu smelting slags by solid

carbon (invited paper)

84) Y.J. Kang, J.H. Park, and C. Lee: Proc. 3rd East Asia Symp. on Technol. Wed. & Join.

[EAST-WJ2013], (2013), EAST-WJ2013, 22 Nov. 2013, Busan, KOREA

Influence of thermal history on the acicular ferrite nucleation in HSLA multipass welds

85) S.S. Park and J.H. Park: Proc. of EPD Symp. on Pyrometallurgy in Honor of David G.C.

Robertson, (2014), pp. 243-250, TMS2014, 16-20 Feb. 2014, San Diego, USA

Removal of Pb from Molten Copper by FetO-SiO2 (-CaO, Al2O3) Slag Treatment in

Mitsubishi Process (invited paper)

86) J.H. Park and K.Y. Ko: Proc. of EPD Symp. on Pyrometallurgy in Honor of David G.C.

Robertson, (2014), pp. 605-612, TMS2014, 16-20 Feb. 2014, San Diego, USA

Viscosity-Structure Relationship in the CaO-SiO2-MnO-CaF2 Slag for the Production of

Manganese Ferroalloys (invited paper)

87) Y.S. Han and J.H. Park: Proc. of Rare Metal Technology 2014, (2014), pp. 43-45,

TMS2014, 16-20 Feb. 2014, San Diego, USA

Thermodynamics of Indium Dissolution Behavior in FeO-bearing Metallurgical Slag

88) J.H. Shin, M.S. Choi, D.J. Min and J.H. Park: Proc. of Rare Metal Technology 2014, (2014),

pp. 149-153, TMS2014, 16-20 Feb. 2014, San Diego, USA

Sublimation Kinetics of Zirconium Tetrachloride (ZrCl4) for Producing Zr Sponge

89) J.H. Park, J.H. Heo and B.S. Kim: CAMP-ISIJ, vol. 27, (2014), pp. 153-156, 167th ISIJ

Meeting, 21-23 Mar. 2014, Tokyo, JAPAN

Iron Recovery from Waste Copper Slag via Smelting Reduction Process

90) J.H. Heo, B.S. Kim and J.H. Park: Proc. of 12th Kor-Jpn Int. Symp. on Resourc. Recycl. &

Mater. Sci., (2014), 12th Korea-Japan Int. Symp. on Resources Recycling and Materials

Science, 17-18 Apr. 2014, Daejeon, KOREA

Iron Recovery from Waste Copper Smelting Slags

91) Y.S. Han and J.H. Park: Proc. of 12th Kor-Jpn Int. Symp. on Resourc. Recycl. & Mater.

Sci., (2014), 12th Korea-Japan Int. Symp. on Resources Recycling and Materials Science,

17-18 Apr. 2014, Daejeon, KOREA

Dissolution mechanism of indium in the FeO-SiO2-Al2O3-5CaO-MgOsat slag system

92) E.H. Jeong, C.W. Nam, K.H. Park and J.H. Park: Proc. of 12th Kor-Jpn Int. Symp. on

Resourc. Recycl. & Mater. Sci., (2014), 12th Korea-Japan Int. Symp. on Resources

Recycling and Materials Science, 17-18 Apr. 2014, Daejeon, KOREA

Effect of oxide flux and reducing agent on the formation of matte phase from Fe-Ni-Cu-Co

alloy using waste gypsum

93) Y.J. Kang, J.H. Park, and C. Lee: Proc. of 67th IIW Ann. Assembly & Int. Conf. [IIW 2014],

(2014), IIW 2014, 13-18 July 2014, Seoul, KOREA

Influence of welding thermal history on the acicular ferrite formation in HSLA multipass welds

94) J.H. Park: 3rd Seminar on High Quality Steels, (2014), University of Science and

Technology of Beijing (USTB), 6-8 Aug. 2014, Beijing, CHINA.

Control of MgAl2O4 spinel inclusions in steelmaking and continuous casting processes

(invited lecture)

95) J.H. Park: 3rd Seminar on High Quality Steels, (2014), University of Science and

Technology of Beijing (USTB), 6-8 Aug. 2014, Beijing, CHINA.

Tundish metallurgy for clean steels ; Active use of tundish flux and control of steel

reoxidation (invited lecture)

96) J.H. Park and S.K. Kwon: Proc. of Discussion Meeting on Thermodynamics of Alloys

[TOFA 2014], (2014), p. 73, TOFA 2014, 7-11 September 2014, Brno, CZECH REPUBLIC

Thermodynamics of interfacial reaction between Fe-Cr-Ni-Al-Ce alloy melt and alumina

refractory

97) J.H. Park, Y.B. Kang and J.J. Pak: Proc. of 6th Korea-China Joint Symposium on

Advanced Steel Technology, (2014), pp. 105-113, 9-10 October. 2014, Nanjing, CHINA

Inclusion Analysis of High Mn-Al Alloyed Steels (HiMAS) and the Interfacial Reaction

between HiMAS melt and CaO-SiO2-Al2O3-MgO Slag

98) Y.S. Han, K.Y. Ko and J.H. Park: Proc. of Materials Challenges in Alternative &

Renewable Energy [MCARE 2015], (2015), p. 120, MCARE 2015, 24-27 Feb. 2015, Jeju,

KOREA

Thermochemical fundamentals of ‘Indium’ recovery in the pyrometallurgical recycling

technology

99) J.H. Park and T.S. Kim: Proc. of 6th Int. Cong. on Sci. & Technol. of Steelmaking [ICS

2015], (2015), pp. 866-869, ICS 2015, 12-14 May, 2015, Beijing, CHINA

Viscosity of Ladle Refining Slags and Structural Analysis using micro-Raman Spectroscopy

(keynote lecture)

100) T.S. Kim and J.H. Park: Proc. of 6th Int. Cong. on Sci. & Technol. of Steelmaking [ICS

2015], (2015), pp. 547-549, ICS 2015, 12-14 May, 2015, Beijing, CHINA

Influence of compositional change in tundish flux on the reoxidation of molten steel

101) J.H. Park: 4th Seminar on High Quality Steels, (2015), University of Science and

Technology of Beijing (USTB), 15-17 May 2015, Beijing, CHINA.

Fundamentals of Slag Chemistry for Producing Clean Steels (invited lecture)

102) J.H. Park: 4th Seminar on High Quality Steels, (2014), University of Science and

Technology of Beijing (USTB), 15-17 May 2015, Beijing, CHINA.

Tundish metallurgy for clean steels (invited lecture)

103) J.H. Park, D.J. Paik, and M.H. Hong: Proc. of 10th Int. Conf. on Zn & Zn Alloy Coated

Steel Sheet [GALVATECH 2015], (2015), pp. 565-570, GALVATECH 2015, 31 May – 3

June 2015, Toronto, CANADA

Formation behavior of dross particles in hot dip galvanizing bath

104) S.M. Lee, S.K. Lee, J.S. Kim, D.J. Paik, M.H. Hong and J.H. Park: Proc. of 10th Int. Conf.

on Zn & Zn Alloy Coated Steel Sheet [GALVATECH 2015], (2015), pp. 553-557,

GALVATECH 2015, 31 May – 3 June 2015, Toronto, CANADA

Influence of initial iron content in zinc bath on the dissolution rate of iron from steel sheet

during hot dip galvanizing process

105) J.H. Heo and J.H. Park: Proc. of 2nd Int. Conf. on Mining, Mater. & Metall. Eng. [MMME

2015], (2015), CD-ROM paper #349, MMME 2015, 20-21 July 2015, Barcelona, SPAIN

Reduction Kinetics of MnO in HCFeMn Slag by SiMn Melt (best paper award)

106) J.H. Park: Proc. of 9th Int. Conf. on Clean Steel [Clean Steel IX], (2015), CD-ROM paper

(Alloy and special steels Chapter), Clean Steel IX, 8-10 September 2015, Budapest,

HUNGARY.

Influence of steel-refractory reaction on the formation behaviour of inclusions in Ce-added

25Cr-20Ni steel melts

107) J.H. Shin, C.H. Chang and J.H. Park: Proc. of 9th Int. Conf. on Clean Steel [Clean Steel IX],

(2015), CD-ROM paper (Slags and fluxes Chapter), Clean Steel IX, 8-10 September 2015,

Budapest, HUNGARY.

Effect of ladle slag on the formation behaviour of spinel inclusion in V-alloyed steel

108) J.H. Park, J.H. Shin and D.S. Kim: Proc. of Liq. Met. Process. & Cast. Conf. [LMPC 2015],

(2015), CD-ROM paper, LMPC 2015, 20-24 Sep 2015, Leoben, AUSTRIA

Effect of CaF2 Addition in Refining Slag on the Formation Behaviour of Spinel Inclusion in

Steel for Power Plant Use

109) J.H. Park: Proc. 6th Asia Steel Int. Conf. [ASIA STEEL 2015], (2015), pp. 414-415, ASIA

STEEL 2015, 5-8 Oct 2015, Yokohama, JAPAN

Effect of Mn-Ca and Mg-Ca substitution on the structure and properties of calcium silicate

melts

110) S.J. Jeong, T.S. Kim and J.H. Park: Proc. 6th Asia Steel Int. Conf. [ASIA STEEL 2015],

(2015), pp. 330-331, ASIA STEEL 2015, 5-8 Oct 2015, Yokohama, JAPAN

Effect of Ce2O3 on the sulfide capacity of MnO-SiO2-Al2O3 oxide system

111) J.H. Heo and J.H. Park: Proc. 6th Asia Steel Int. Conf. [ASIA STEEL 2015], (2015), pp.

486-487, ASIA STEEL 2015, 5-8 Oct 2015, Yokohama, JAPAN

Reduction behavior of FeO in EAF slags by aluminothermic process

112) J.H. Park: Proc. Int. Union of Mater. Res. Soc. – Int. Conf. on Adv. Mater. [IUMRS-ICAM

2015], (2015), IUMRS-ICA 2015, 25-29 October 2015, Jeju, KOREA

Fundamentals and Applications of Slag Properties for Producing Clean Steels in Ladle

Refining and Tundish Metallurgy (invited lecture)

113) J.H. Shin, C.H. Chang and J.H. Park: Proc. Int. Union of Mater. Res. Soc. – Int. Conf. on

Adv. Mater. [IUMRS-ICAM 2015], (2015), IUMRS-ICA 2015, 25-29 October 2015, Jeju,

KOREA

Influence of Refractory-Slag-Metal Reactions on the Formation Behavior of Spinel Inclusion

in V-alloyed Steel

114) J.G. Yang, S.H. Lee and J.H. Park: Proc. Int. Union of Mater. Res. Soc. – Int. Conf. on


KOREA

Thermodynamics on the Control of Aluminum and Titanium in Ni-base Superalloys during

ESR Process

115) S.J. Jeong, T.S. Kim and J.H. Park: Proc. Int. Union of Mater. Res. Soc. – Int. Conf. on


KOREA

Effect of Ce Oxide on the Sulfide Capacity and Structure of MnO-SiO2-Al2O3-Ce2O3 Oxide

System

116) J.H. Heo, J.I. Hwang and J.H. Park: Proc. Int. Union of Mater. Res. Soc. – Int. Conf. on


KOREA

Iron Recovery from EAF Slags by Aluminothermic Process

117) T.S. Kim, B.S. Kim and J.H. Park: Proc. Int. Union of Mater. Res. Soc. – Int. Conf. on Adv.

Mater. [IUMRS-ICAM 2015], (2015), IUMRS-ICA 2015, 25-29 October 2015, Jeju, KOREA

Effect of Compositional Changes on the Viscous Flow of Multi-component Slags for the

Smelting of PCB Wastes (Best Poster Award)

118) J.H. Park: Proc. of EPD Symp. in Honor of Christopher W. Bale, (2016), TMS2016, 14-18

Feb. 2016, Nashville, USA

Applications of computational thermodynamics to predict the refractory-slag-metal reaction

equilibria at high temperatures

119) J.H. Park: Proc. 10th Int. Conf. on Molten Slags, Fluxes, and Salts [MOLTEN 2016],

(2016), pp. 715-721, MOLTEN 2016, 22-26 May 2016, Seattle, USA

Understanding sulfide capacity of molten aluminosilicates via structural information from

Raman and NMR spectroscopic methodologies (invited lecture)

120) J.G. Yang and J.H. Park: Proc. 10th Int. Conf. on Molten Slags, Fluxes, and Salts

[MOLTEN 2016], (2016), pp. 745-748, MOLTEN 2016, 22-26 May 2016, Seattle, USA

Thermodynamics of ESR slag for producing nickel alloys

121) J.H. Heo and J.H. Park: Proc. 10th Int. Conf. on Molten Slags, Fluxes, and Salts

[MOLTEN 2016], (2016), MOLTEN 2016, 22-26 May 2016, Seattle, USA

Reduction Behavior of FeO in EAF Slags by Aluminothermic Smelting Process

122) H. Park, M. Ha, D.H. Yang, J.S. Sohn and J.H. Park: Proc. 10th Int. Conf. on Molten Slags,

Fluxes, and Salts [MOLTEN 2016], (2016), pp. 1271-1276, MOLTEN 2016, 22-26 May

2016, Seattle, USA

Production of Ceramic Balls by High Temperature Atomization of Mine Wastes

123) J.H. Park, J.H. Heo and J.S. Park: Proc. 5th Int. Conf. on Process Development in Iron

and Steelmaking [SCANMET V], (2016), CD-ROM paper, SCANMET V, 12-15 June, Lulea,

SWEDEN

Thermodynamics of the formation of spinel layer at the interface between alumina refractory

and calcium aluminosilicate slags containing manganese oxide

124) J.H. Shin and J.H. Park: Proc. 5th Int. Conf. on Process Development in Iron and

Steelmaking [SCANMET V], (2016), CD-ROM paper, SCANMET V, 12-15 June, Lulea,

SWEDEN

Optimization of slag-metal reaction model for prediction of inclusion composition in molten

steel

125) J.G. Kang, J.H. Shin and J.H. Park: Proc. 5th Int. Conf. on Process Development in Iron

and Steelmaking [SCANMET V], (2016), CD-ROM paper, SCANMET V, 12-15 June, Lulea,

SWEDEN

Effect of slag chemistry on desulfurization kinetics in secondary refining process

126) J.H. Shin and J.H. Park: Proc. of 3rd. Int. Conf. on Mining, Mater. & Metall. Eng. [MMME

2016], (2016), CD-ROM paper, MMME 2016, 23-24 August 2016, Budapest, HUNGARY

Reducing dephosphorization of SiMn alloy melt and suppression of phosphine (PH3) gas

emission

127) J. Jeon, Y. Kang, J.H. Park and Y Chung: Proc. of 8th Korea-China Joint Symposium on

Advanced Steel Technology, (2016), pp. 45-54, 19-21 October. 2016, Chongqing, CHINA

Degradation mechanism of MgAl2O4 spinel castable in contact with high MnO containing

slags having different basicity

128) J.H. Shin and J.H. Park: Proc. Mater. Sci. & Technol. [MS&T2016], (2016), MS&T2016, 23-

27 Oct. 2016, Salt Lake City, USA

Effect of halide flux addition in molten salts on the production efficiency of critical metals:

Applications of computational thermodynamics to molten salt design

129) J.G. Yang, H.S. Park and J.H. Park: Proc. of EPD Symp. in Honor of Ramana G. Reddy,

(2017), pp. 301-306, TMS2017, 26 Feb. – 2 Mar. 2017, San Diego, USA

Gold Solubility in Smelting Slags for the Recycling of Industrial and Mining Wastes

130) J.M. Jeong, J.H. Shin, C.W. Nam, K.H. Park and J.H. Park: Proc. of EPD Symp. in Honor

of Ramana G. Reddy, (2017), pp. 495-499, TMS2017, 26 Feb. – 2 Mar. 2017, San Diego,

USA

Thermodynamics of Simultaneous Desulfurization and Dephosphorizaion of SiMn Alloy

131) J.H. Park and J.H. Shin: CAMP-ISIJ, vol. 30, (2017), p. 188, 173rd ISIJ Meeting, 15-17 Mar.

2017, Tokyo, JAPAN

Application of computational thermodynamics in steelmaking process (Sawamura award

lecture)

132) J.H. Shin and J.H. Park and: CAMP-ISIJ, vol. 30, (2017), p. 189, 173rd ISIJ Meeting, 15-17

Mar. 2017, Tokyo, JAPAN

Influence of Ladle Slag Composition on the Formation Behavior of Oxide-Sulfide Complex

Inclusions in Molten Steel

133) J.S. Han, J.G. Kang, J.H. Shin and J.H. Park: CAMP-ISIJ, vol. 30, (2017), p. 8, 173rd ISIJ

Meeting, 15-17 Mar. 2017, Tokyo, JAPAN

Effect of CaF2 content in ladle slag on refractory corrosion

134) M. Cheepu, J.G. Kang, T.H. Kim, J.H. Park and Y.D. Park: Proc. of Int. Welding-Joining

Conf. Korea [IWJC–Korea 2017], (2017), IWJC–Korea 2017, 11-14 April 2017, Gyeongju,

Korea.

Analysis and improvement in reducing slag formation for MIG/MAG welding of various

automotive parts

135) J.G. Kang, M. Cheepu, Y.D. Park and J.H. Park and: Proc. of Int. Welding-Joining Conf.

Korea [IWJC–Korea 2017], (2017), IWJC–Korea 2017, 11-14 April 2017, Gyeongju, Korea.

Development of solid wire in GMAW process for improving slag detachability

136) M.H. Lee, J.H. Kong, S.H. Park and J.H. Park: Proc. of 9th European Stainless Steel

Conference - Science & Market and 5th European Duplex Stainless Steel Conference &

Exhibition [ESSC & DUPLEX 2017], (2017), CD-ROM paper, ESSC & DUPLEX 2017, 25 –

27 May, 2017, Bergamo, ITALY

Effect of nitrogen content on grain size of 16Cr ferritic stainless steel cast and formability of

cold rolled sheet

137) Y. Kang and J.H. Park: Proc. of 9th European Stainless Steel Conference - Science &

Market and 5th European Duplex Stainless Steel Conference & Exhibition [ESSC &

DUPLEX 2017], (2017), CD-ROM paper, ESSC & DUPLEX 2017, 25 – 27 May, 2017,

Bergamo, ITALY

Impacts of non-metallic inclusions on characteristics of stainless steels – a review

138) J.H. Heo and J.H. Park: Proc. of 2nd Metallurgy Innovation Symposium [MIS 2017],

(2017), MIS 2017, 6 – 8 June, 2017, Beijing, CHINA

Recovery of iron and manganese from EAF slag via novel aluminothermic smelting reduction

(ASR) process (invited lecture)

139) J.H. Shin and J.H. Park: Proc. of 6th Asian Conference on Molten Salt Chemistry and

Technology [AMS 6], (2017), AMS 6, 13 – 16 June, 2017, Gyeongju, KOREA

Applications of computational thermodynamics to molten salt systems for high temperature

metal extraction

140) Y.M. Lee, J.G. Yang, and J.H. Park: Proc. of 6th Asian Conference on Molten Salt

Chemistry and Technology [AMS 6], (2017), AMS 6, 13 – 16 June, 2017, Gyeongju,

KOREA

Thermodynamics of MgF2-CaF2-MF (M=Na+, Li+) molten salt system for extraction of

magnesium

141) J.H. Heo and J.H. Park: Proc. of 9th European Metallurgical Conference [EMC 2017],

(2017), vol. 4, pp. 1475-1483, EMC 2017, 25 – 28 June, 2017, Leipzig, GERMANY

Recovery of iron and removal of hazardous elements from metallurgical slags

142) J.H. Shin and J.H. Park: Proc. of 9th European Continuous Casting Conference [ECCC

2017], (2017), pp. 477-483, ECCC 2017, 26 – 29 June, 2017, Vienna, AUSTRIA

Thermochemical and kinetic modeling for the evolution of non-metallic inclusions during ladle

refining and continuous casting processes

143) T.S. Kim, Y. Chung, L. Holappa and J.H. Park: Proc. of 9th European Continuous Casting

Conference [ECCC 2017], (2017), pp. 571-577, ECCC 2017, 26 – 29 June, 2017, Vienna,

AUSTRIA

Influence of Rice Husk Ash on the Reoxidation of Molten Steel in Continuous Casting

Tundish

144) J.H. Park: Proc. of Int. Metall. Process Workshop for Young Scholars [IMPROWYS

2017], (2017), IMPROWYS 2017, 11 – 12 August, 2017, Shenyang, CHINA

Use of inclusion particles for the grain refinement during melting and casting of ferritic steels

(invited lecture)

145) J.H. Park and H.S. Park: Proc. of 7th Int. World Gold Conf. [World Gold 2017], (2017), CD-

ROM paper, COM 2017, 27 – 30 August, 2017, Vancouver, CANADA

Gold solubility in smelting slags for the recycling of industrial and mining wastes

146) J.H. Shin and J.H. Park: Euro. Cong. on Adv. Mater. Process. [EUROMAT 2017], 17 – 22

Sep. 2017, Thessaloniki, GREECE

Effect of Slag Composition on the Formation Behaviour of Oxide-Sulfide Complex Inclusions

in Ladle Metallurgy

147) N.R. Choi and J.H. Park: Euro. Cong. on Adv. Mater. Process. [EUROMAT 2017], 17 – 22

Sep. 2017, Thessaloniki, GREECE

Characterization of Non-metallic Inclusions in CoCrFeMnNi High-Entropy Alloy

148) Y.M. Lee, J.G. Yang and J.H. Park: Euro. Cong. on Adv. Mater. Process. [EUROMAT

2017], 17 – 22 Sep. 2017, Thessaloniki, GREECE

Thermodynamic Characterization of Molten Fluoride-based Flux for the Sustainable

Production of Magnesium through Solid Oxide Membrane (SOM) Process

149) J.G. Kang, J.H. Shin and J.H. Park: Proc. of 3rd Int. Conf. on Sci. Technol. of Ironmak. &

Steelmak. [STIS 2017], (2017), pp. 147-150, STIS 2017, 11 – 13 December, 2017, IIT

Kanpur, INDIA

Desulfurization kinetics and inclusion formation mechanism in high-S containing steel during

secondary refining process (keynote lecture)

150) J.S. Han, J.G. Kang, J.H. Shin and J.H. Park: Proc. of 3rd Int. Conf. on Sci. Technol. of

Ironmak. & Steelmak. [STIS 2017], (2017), pp. 359-362, STIS 2017, 11 – 13 December,

2017, IIT Kanpur, INDIA

Influence of CaF2 content in ladle slag and temperature on slag penetration and refractory

erosion

151) T.S. Kim and J.H. Park: Proc. 15th Int. Ferro Alloy Cong. [INFACON XV 2018], (2018), CD-

ROM paper, INFACON XV 2018, 25-28 Feb. 2018, Cape Town, SOUTH AFRICA

Influence of CaF2 content on viscosity and structure of MnO-BaO-SiO2-MgO-CaF2 slags

(invited lecture)

152) D.H. Kim, J.H. Heo, H.S. Park and J.H. Park: Proc. 15th Int. Ferro Alloy Cong. [INFACON

XV 2018], (2018), CD-ROM paper, INFACON XV 2018, 25-28 Feb. 2018, Cape Town,

SOUTH AFRICA

Carbothermic reduction behaviour of ilmenite ore at high temperatures

153) J.H. Heo, T.S. Kim and J.H. Park: Proc. 15th Int. Ferro Alloy Cong. [INFACON XV 2018],

(2018), CD-ROM paper, INFACON XV 2018, 25-28 Feb. 2018, Cape Town, SOUTH AFRICA

Silicothermic reduction behaviour of MnO in the MnO-SiO2-MO-CaF2 (M=Ca or Ba) slags

154) J.H. Park and Y.M. Lee: Proc. 3rd Multidisciplinary Int. Conf. on Adv. Metall. Process. &

Mater. [AdMet 2018], (2018), CD-ROM paper, AdMet 2018, 10-13 Jun. 2018, Lviv,

UKRAINE

Applications of thermodynamics software to design molten fluxes for producing rare metals ;

zirconium and magnesium

155) J.H. Park, J.G. Kang, T.S. Kim and Y. Chung: Proc. of 7th Int. Cong. on Sci. & Technol. of

Steelmaking [ICS 2018], (2018), CD-ROM paper, ICS 2018, 13-15 Jun., 2018, Venice,

ITALY

Influence of physicochemical properties of ladle slag on desulfurization reaction kinetics:

Criteria for transition of rate controlling step (keynote lecture)

156) J.G. Kang, T.S. Kim and J.H. Park: Proc. of 7th Int. Cong. on Sci. & Technol. of

Steelmaking [ICS 2018], (2018), CD-ROM paper, ICS 2018, 13-15 Jun., 2018, Venice,

ITALY

Applications of computational thermodynamics to optimize the ladle refining slag in view of

desulfurization efficiency and cleanliness of molten steel

157) J.H. Park and J.J. Pak: Proc. of 7th Int. Cong. on Sci. & Technol. of Steelmaking [ICS

2018], (2018), CD-ROM paper, ICS 2018, 13-15 Jun., 2018, Venice, ITALY

Formation of equiaxed structure by controlling non-metallic inclusions during refining and

casting processes

158) Y. Kang and J.H. Park: Proc. of 7th Int. Cong. on Sci. & Technol. of Steelmaking [ICS

2018], (2018), CD-ROM paper, ICS 2018, 13-15 Jun., 2018, Venice, ITALY

A review on the effects of non-metallic Inclusions on the properties of stainless steels

159) G. Park, J. Shin, H. Kim, J Lee, C. Chang, D. Jeon, J. Kim and J.H. Park: Proc. of 7th Int.

Cong. on Sci. & Technol. of Steelmaking [ICS 2018], (2018), CD-ROM paper, ICS 2018,

13-15 Jun., 2018, Venice, ITALY

Optimization of steelmaking conditions to reduce macro inclusion for special steel

160) J.S. Han, J.H. Heo, I. Sohn, J.H. Park: Proc. Extraction 2018 [Extraction 2018], (2018), pp.

667-671, Extraction 2018, 26-29 Aug. 2018, Ottawa, CANADA

Interfacial reaction between magnesia refractory and EAF slag

161) J.H. Heo and J.H. Park: Proc. Extraction 2018 [Extraction 2018], (2018), pp. 1103-1108,

Extraction 2018, 26-29 Aug. 2018, Ottawa, CANADA

Optimization of slag composition in view of iron recovery and dephosphorization in EAF

process using computational simulation

162) T.S. Kim, J.H. Heo, J.G. Kang, J.S. Han and J.H. Park: Proc. Extraction 2018 [Extraction

2018], (2018), pp. 1121-1127, Extraction 2018, 26-29 Aug. 2018, Ottawa, CANADA

Understanding viscosity-structure relationship of slags and its influence on metallurgical

processes

163) J.H. Park: Proc. of 10th Int. Conf. on Clean Steel [Clean Steel X], (2018), CD-ROM paper,

Clean Steel X, 18-20 September 2018, Budapest, HUNGARY.

Fundamentals and applications of slag properties for producing clean steels in ladle and

tundish (plenary lecture)

164) T.S. Kim and J.H. Park: Proc. of 10th Int. Conf. on Clean Steel [Clean Steel X], (2018),

CD-ROM paper, Clean Steel X, 18-20 September 2018, Budapest, HUNGARY.

Influence of calcium aluminate flux on the reoxidation behavior of molten steel in continuous

casting tundish

165) N. Choi, K.R. Lim, Y.S. Na, and J.H. Park: Proc. of Discussion Meeting on

Thermodynamics of Alloys [TOFA 2018], (2018), p. 115, TOFA 2018, 1-5 October 2018,

Seoul, KOREA

Thermodynamics of non-metallic inclusions in high entropy alloys

166) N. Choi, N. Park and J.H. Park: Proc. of Discussion Meeting on Thermodynamics of

Alloys [TOFA 2018], (2018), p. 116, TOFA 2018, 1-5 October 2018, Seoul, KOREA

Thermodynamics of nitrogen solubility in high manganese steel melts

167) J.H. Park and J.H. Shin: Proc. of Discussion Meeting on Thermodynamics of Alloys

[TOFA 2018], (2018), p. 69, TOFA 2018, 1-5 October 2018, Seoul, KOREA

Application of computational thermodynamics to simulation of ladle refining process of steel

(invited lecture)

168) J.H. Shin and J.H. Park: Proc. China Symp. on Sustain. Steelmak. Tech. [CSST 2018],

(2018), CSST 2018, 24-26 Oct. 2018, Tianjin, CHINA

Control of MgAl2O4-CaS Complex Inclusions in Al-killed Resulfurized Steel Melts (keynote

lecture)

169) J.H. Heo, J.S. Yoo, Y. Chung and J.H. Park: Proc. China Symp. on Sustain. Steelmak.

Tech. [CSST 2018], (2018), CSST 2018, 24-26 Oct. 2018, Tianjin, CHINA

Effect of Aluminum/Carbon Composite Pellet (ACCP) on FeO Reduction and Iron Recovery

from Electric Arc Furnace Slag

170) J.H. Heo and J.H. Park: Proc. China Symp. on Sustain. Steelmak. Tech. [CSST 2018],

(2018), CSST 2018, 24-26 Oct. 2018, Tianjin, CHINA

Optimization of Electric Arc Furnace (EAF) Process in view of Iron Recovery and

Dephosphorization Efficiency

171) J. Yang, L. Xu, Y. Zhang, T. Zhang, J.H. Park and H. Ono: Proc. China Symp. on Sustain.

Steelmak. Tech. [CSST 2018], (2018), CSST 2018, 24-26 Oct. 2018, Tianjin, CHINA

Effect of Mg Deoxidation on Inclusions, Microstructures and Toughness of Heat Affected

Zone of Steel Plate after Large Heat Input Welding

172) N. Choi, N. Park and J.H. Park: Proc. of 2nd Int. Conf. on High Entropy Mater. [ICHEM

2018], (2018), ICHEM 2018, 9-12 December 2018, Jeju, KOREA

Effect of melting conditions on microstructure and mechanical properties of CoCrFeMnNi

high entropy alloy: Role of impurity and inclusions

173) J.Y. Kang, N. Choi and J.H. Park: Proc. of 2nd Int. Conf. on High Entropy Mater. [ICHEM

2018], (2018), ICHEM 2018, 9-12 December 2018, Jeju, KOREA

Influence of inclusions and L12 precipitates on the microstructure and mechanical properties

of CoCrFeNi-based high entropy alloys

174) N. Choi, K.R. Lim, Y.S. Na and J.H. Park: Proc. of 2nd Int. Conf. on High Entropy Mater.

[ICHEM 2018], (2018), ICHEM 2018, 9-12 December 2018, Jeju, KOREA

Characterization of non-metallic inclusions and their influence on the mechanical properties

of CoCrFeMnNi high-entropy alloy

Conference abstracts (Korean)

175 domestic conference presentations

Documents

Curriculum Vitae - JOO HYUN PARK Vitae_2_JHP.pdf · 2012-present: Institute of Materials, Minerals and Mining, IOM3 (UK), and Australasian Institute of Mining and Metallurgy, AusIMM