CURRICULUM VITAE - ICAFE Hassan.pdf · Hassan obtained his Mechanical Engineering degree (B.Sc), at Leeds University, Leeds U.K. in 1977. He continued to He continued to pursue his

5/2/2016 UMEXPERT PROF. DR. MASJUKI BIN HAJI HASSAN

https://umexpert.um.edu.my/masjuki.html 1/41

CURRICULUM VITAE

PERSONAL DETAIL

BIBLIOMETRIC DATA

Total Articles in PublicationList

521 (http://www.researcherid.com/citation/B-8961-2010)

Articles With Citation Data 319 (http://www.researcherid.com/citation/B-8961-2010)

Sum of the Times Cited 5706 (http://www.researcherid.com/citation/B-8961-2010)

Average Citations per Article 17.89 (http://www.researcherid.com/citation/B-8961-2010)

h-index 39 (http://www.researcherid.com/citation/B-8961-2010)

Co-authors Collaboration Network (http://labs.researcherid.com/mashlets/rid/mashletsServer.jsp?rid=B-8961-2010&mid=CollaborationNetwork)

This information is generated from http://researcherid.com (http://www.researcherid.com)

BIOGRAPHY

Professor Dr. Masjuki Hj. Hassan obtained his Mechanical Engineering degree (B.Sc), at Leeds University, Leeds U.K. in 1977. He continued topursue his M.Sc. in Tribology and Ph.D. from the same university and graduated in 1978 and 1982 respectively. Upon the completion of his studies, hewas being appointed as a lecturer in 1983 at University of Malaya. He is currently appointed as the Professor at Mechanical Engineering Department,University of Malaya. He is also one of the senate members of University of Malaya and secretary of Council of National Professors- Engineering andTechnology cluster. He is the founding President of Malaysian Tribology Society (MyTRIBOS) and the Director of the Centre for Energy Sciences.

ACADEMIC QUALIFICATION (Qualification), (Institution).

Prof. Dr. Masjuki Bin Haji HassanProfessorDepartment of Mechanical EngineeringFaculty of Engineering +603-79675245 +603-79675245 [email protected] Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, MALAYSIA ResearcherID Link http://www.researcherid.com/rid/B-8961-2010 (http://www.researcherid.com/rid/B-8961-2010)Scopus ID Link http://www.scopus.com/authid/detail.url?authorId=7003646492 (http://www.scopus.com/authid/detail.url?authorId=7003646492)

http://www.researcherid.com/citation/B-8961-2010





http://labs.researcherid.com/mashlets/rid/mashletsServer.jsp?rid=B-8961-2010&mid=CollaborationNetwork

http://www.researcherid.com/

http://www.researcherid.com/rid/B-8961-2010

http://www.scopus.com/authid/detail.url?authorId=7003646492



PROFESSIONAL (Organisation), (Role), (Year), (Level).

PHD(LEEDS)(1982), LEEDS UNIVERSITY, LEEDS, UK

MSC(LEEDS)(1978), LEEDS UNIVERSITY, LEEDS, UK

BSC(HONS)(LEEDS)(1977), LEEDS UNIVERSITY, LEEDS, UK

International Tribology Council, Vice-president, 2016, (International)

King Saud University, Riyadh, Saudi Arabia, Visiting Research Professor, 2015-2016, (International)

ASM TASK FORCE ON CARBON FREE ENERGY, Committee Member, 2014, (National)

MALAYSIAN TRIBOLOGY SOCIETY (MYTRIBOS), President, 2013-2017, (International)

Society of Automotive Engineers (SAE), Member, 2013-2016, (International)

JICA AUN/SEED-Net (Editorial Board Member- ASEAN Engineering Journal), Editorial Board Member, 2013, (International)

ENGINEERING COUNCIL UK (CENG), Charted Engineer, 2013, (International)

INSTITUTION OF MECHANICAL ENGINEERS, LONDON, UK. (FIMECHE), Fellow, 2013, (International)

Malaysian Green Technology Corporation (GreenTech Malaysia), Active Member, 2012, (National)

Malaysian Society for Engineering and Technology, Active Member, 2011, (National)

MALAYSIAN PROFESSOR COUNCIL (SECRETARY OF ENGINEERING, TECHNOLOGY AND BUILT ENVIRONMENT CLUSTER), Secretary, 2010-2016, (National)

Engineering e-journal UM, Chief Editor, 2009, (National)

Malaysian Tribology Society (based in UM), Membership, 2008, (International)

ASHRAE, Member, 2008-2009, (International)

IJAME, University Malaysia Pahang, Editorial Board, 2008, (National)

Mechanical Engineering Component Technical Committee (TC), SIRIM BHD, Member, 2006, (National)

Int. Conf. in Renewable Energy and Environment, WREEC2006, Tripoli Libya, Member Of The International Committee, 2006-2006, (National)

ASIAN TRIBOLOGY SOCIETY, Council Member, 2006, (International)

PUSAT TENAGA MALAYSIA (PTM) / (NATIONAL ENERGY CENTRE), Member, 2005, (National)

JOURNAL MEKANICAL, UNIVERSITI TEKNOLOGI MALAYSIA, Advisor, 2005-2012, (International)

Int. J. of Eng. Sc. & Tech., Fac. of Eng., University of Malaya, Board Member, 2003, (National)

Working Group on Industrial V Belt Committee, SIRIM, Chairman, 2003-2006, (National)

End Use Sub Work Group on Refrigerators (SWG-F) Committee, Energy Commission of Malaysia, Chairman, 2003-2007, (National)

Centre of Research in Energy Sciences, University of Malaya, Board Member, 2002, (National)

Centre of Research in Energy Sciences, University of Malaya, Director, 2002, (International)



ADMINISTRATIVE DUTIES (Role), (Level), (Start date),(End Date).

BSME-ASME Int. Conf. on Thermal on Thermal Engineering , BUET, Bangladesh, Member, 2001-2002, (International)

SAE USA, Member, 1999, (International)

National Point of Contact Representative (NPCR) , Member, 1998, (National)

National Point of Contact Representative (NPCR) \" for Regional Network for Industrial Development in Southeast Asia and the Pacific, UNESCOMalaysia, Member, 1998, (National)

SAE International, Member, 1991, (International)

Institute of Energy Malaysia, Executive Committee Member, 1991, (National)

STLE ( Society of Tribologists and Lubrication Engineers ) USA, Member, 1990-2003, (International)

National Point of Contact Representative (NPCR) , Member, 1986-2007, (National)

Islamic Academy of Science of Malaysia, Member, 1983, (National)

The Institution of Mechanical Engineers (I.Mech.E.) London, U.K., Associate Member, 1977, (International)

Director Energy Sciences Research Centre, University Malaya, 01-jan-02

President, Malaysian Tribology Society, International, 18-nov-13 - 17-nov-17

Head, Centre for Energy Sciences , University Malaya, 01-jan-16 - 31-dec-16

Chairman, University Malaya, 02-nov-15 - 01-nov-16

Head of Department , University Malaya, 01-aug-15 - 31-jul-16

Head Of Department, Kejuruteraan Mekanik, Department Of Mechanical Engineering, Faculty Of Engineering, 01-aug-15 - 31-jul-16

Secretary, Malaysia Professor's Council: Engineering, Technology and Built Environment Cluster, National, 01-apr-13 - 31-mar-16

Head, Centre For Energy Sciences (ces), Department Of Mechanical Engineering, Faculty Of Engineering, 01-jan-15 - 31-dec-15

Head Of Department, Kejuruteraan Mekanik, Department Of Mechanical Engineering, Faculty Of Engineering, 01-aug-14 - 31-jul-15

Coordinator for Boiler Lab, Centre For Energy Sciences (ces), Department Of Mechanical Engineering, Faculty Of Engineering, 27-jul-12 - 26-jul-15

Member of the ASM Task Force on Carbon Free Energy, National, 02-may-14 - 30-apr-15

Head, Centre for Energy Sciences, University Malaya, 02-jan-13 - 31-dec-14

Head, Centre For Energy Sciences (ces), Department Of Mechanical Engineering, Faculty Of Engineering, 02-jan-14 - 31-dec-14

Deputy Dean of Higher Degree, Centre For Energy Sciences (ces), Department Of Mechanical Engineering, Faculty Of Engineering, 01-sep-09 - 30-jun-11

Deputy Dean, Pejabat Dekan, Faculty Of Engineering Dean's Office, Faculty Of Engineering, 01-sep-09 - 30-jun-11

Deputy Dean, Pejabat Dekan, Faculty Of Engineering Dean's Office, Faculty Of Engineering, 02-feb-11 - 30-jun-11

Member, Advanced Engineering & Technology Research Cluster Panel , University Malaya, 01-jan-09 - 31-dec-10

Senate Member, University Malaya, 03-apr-03 - 20-oct-09



AREAS OF EXPERTISE (Area).

RECENT SELECTED PUBLICATIONS (Publication).

Book

2015

2010

2007

Head of Department of Mechanical Engineering, Kejuruteraan Mekanik, Department Of Mechanical Engineering, Faculty Of Engineering, 01-sep-07 - 31-aug-09

Head Of Department, Kejuruteraan Mekanik, Department Of Mechanical Engineering, Faculty Of Engineering, 01-sep-08 - 31-aug-09

Head Of Department, Kejuruteraan Mekanik, Department Of Mechanical Engineering, Faculty Of Engineering, 01-sep-07 - 31-aug-08

Quality Manager, University Malaya, 21-apr-03 - 01-nov-05

Deputy Dean of Development, Pejabat Dekan, Faculty Of Engineering Dean's Office, Faculty Of Engineering, 02-mar-01 - 31-jul-05

Head of Department of Mechanical Engineering, University Malaya, 01-oct-94 - 30-sep-00

Member, Laboratory Technology Training(JLTM)Committee, University Malaya, 01-oct-94 - 30-sep-00

Senate Member , University Malaya, 01-oct-94 - 31-dec-97

Senate Member , University Malaya, 01-nov-87 - 30-sep-88

Senate Member , University Malaya, 22-jul-87 - 31-aug-87

Corrosion Science And Engineering (Tribology, Lubricant, Lube-oil Based Condition Monitoring, Tribo-corrosion, Material Corrosion)

Combustion And Fuel Engineering (Automobile Engine Performance and Emission Monitoring, Energy Efficiency , Biofuels, Alternative Energyresources, Life cycle analysis)

Automotive Fuels (Gasoline, Diesel, Bioethanol, Biodiesel, Hydrogen)

Exergy, Renewable And Sustainable Energy, Refrigerants, Bio-materials,tqm (Automotive and Industrial Exergy Analysis, Energy Sustainablity, ThermalSystem Management with Refrigerants, Tribological Application with Bio-materials, TQM in Industrial Process Management )

Masjuki, H. (2015). Handbook of Plain Bearings: Buku Panduan Galas Datar: Penerbit Universiti Malaya.

Masjuki H.H. 2010. Biofuel Engine: A New Challenge. International & Corporate relations Office (ICR). University of Malaya, Kuala Lumpur, Malaysia.ISBN (978-967-5148-65-1), pp.1-56.

M. A. Kalam, H. H. Masjuki, H. Ramang, M.Syazly, M. Redzuan and T.M.I Mahlia, Palm Oil Diesel Production and Its Experimental Test on a DieselEngine, Book chapter by The Haworth Press, Inc. Binghamton, NY 13904-1580 USA, www.haworthpressinc.com. (Oct./November), 2007.



2004

Chapter In Book

2013

2012

2011

2008

Article In Academic Journals

2016

Kalam, M.A., H.H. Masjuki, M.A. Maleque, M.A. Amalina, H. Abdesselam and T.M.I. Mahlia, in General Emissions 2004, SP-1863, Air-Fuel ratiocalculation for a natural gas fuelled spark ignition engine SAE International, ISBN:0-7680-1399 - 2/SAE2004-01-0640, pp.183-190

M. Shahabuddin, H.H. Masjuki and M.A. Kalam, 2013. Development of Eco-Friendly Biodegradable Biolubricant Based on Jatropha Oil,Ch: 8, pp. 1-12.Tribology in Engineering, Ed. Ha im Pihtili,InTech, ISBN 978-953-51- 1126-9

(file/publication/00003184_93070.pdf)

SHAFIE, S. M., MAHLIA, T. M. I., MASJUKI, H. H. & RISMANCHI, B. 2012. Life cycle assessment (LCA) of electricity generation from rice husk inMalaysia. In: ZENG, D. (ed.), Energy Procedia, 14:499-504, 2011 2nd International Conference on Advances in Energy Engineering.


RISMANCHI, B., SAIDUR, R., MASJUKI, H. H. & MAHLIA, T. M. I. 2012. Cost-benefit analysis of using cold thermal energy storage systems in buildingapplications. In: ZENG, D. (ed.), Energy Procedia:493- 498, 2011 2nd International Conference on Advances in Energy Engineering.


Kalam, M.A. and Masjuki, H.H. 2011. Experimental Test of a Diesel Engine using Envo-Diesel as an Alternative Fuel, New Trends and Developments inAutomotive System Engineering, ISBN 978-953-307-517-4, published by INTECH

M. A. Kalam, H. H. Masjuki, H. Ramang, M.Syazly, M. Redzuan and T.M.I Mahlia, 2008,Palm Oil Diesel Production and Its Experimental Test on aDiesel Engine, Handbook of Plant-Based Biofuels, Ed. Ashok Pandey, CRC Press (Taylor & Francis) New York, pp. 225-240

Rashed, M. M., Masjuki, H. H., Kalam, M. A., Alabdulkarem, A., Imdadul, H. K., Rashedul, H. K., Shahin, M. M., Habibullah, M. 2016. A comprehensivestudy on the improvement of oxidation stability and NOx emission levels by antioxidant addition to biodiesel blends in a light-duty diesel engine RscAdvances (ISI-Cited Publication)

Sebayang, A. H., Masjuki, H. H., Ong, H. C., Dharma, S., Silitonga, A. S., Mahlia, T. M. I., Aditiya, H. B. 2016. A perspective on bioethanol productionfrom biomass as alternative fuel for spark ignition engine Rsc Advances (ISI-Cited Publication)

Ahmed, A., Masjuki, H. H., Varman, M., Kalam, M. A., Habibullah, M., Al Mahmud, K. A. H. 2016. An overview of geometrical parameters of surfacetexturing for piston/cylinder assembly and mechanical seals Meccanica (ISI-Cited Publication)

Ali, O. M., Mamat, R., Masjuki, H. H., Abdullah, A. A. 2016. Analysis of blended fuel properties and cycle-to-cycle variation in a diesel engine with adiethyl ether additive Energy Conversion and Management (ISI-Cited Publication)

Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Habibullah, M., Arslan, A., Monirul, I. M. 2016. Assessment of friction and wearcharacteristics of Calophyllum inophyllum and palm biodiesel Industrial Crops and Products (ISI-Cited Publication)

Shancita, I., Masjuki, H. H., Kalam, M. A., Reham, S. S., Ruhul, A. M., Monirul, I. M. 2016. Evaluation of the characteristics of non-oxidative biodiesels: aFAME composition, thermogravimetric and IR analysis Rsc Advances (ISI-Cited Publication)

Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Alabdulkarem, A., Rashed, M. M., Teoh, Y. H., How, H. G. 2016. Higher alcohol-biodiesel-diesel blends: An approach for improving the performance, emission, and combustion of a light-duty diesel engine Energy Conversion and

https://umexpert.um.edu.my/file/publication/00003184_93070.pdf





2015

Management (ISI-Cited Publication)

Quazi, M. M., Fazal, M. A., Haseeb, A., Yusof, F., Masjuki, H. H., Arslan, A. 2016. Laser-based Surface Modifications of Aluminum and its Alloys CriticalReviews in Solid State and Materials Sciences (ISI-Cited Publication)

Zulkifli, N. W. M., Azman, S. S. N., Kalam, M. A., Masjuki, H. H., Yunus, R., Gulzar, M. 2016. Lubricity of bio-based lubricant derived from differentchemically modified fatty acid methyl ester Tribology International (ISI-Cited Publication)

Suganya, T., Varman, M., Masjuki, H. H., Renganathan, S. 2016. Macroalgae and microalgae as a potential source for commercial applications alongwith biofuels production: A biorefinery approach Renewable Sustainable Energy Reviews (ISI-Cited Publication)

Milano, J., Ong, H. C., Masjuki, H. H., Chong, W. T., Lam, M. K., Loh, P. K., Vellayan, V. 2016. Microalgae biofuels as an alternative to fossil fuel forpower generation Renewable Sustainable Energy Reviews (ISI-Cited Publication)

Rashed, M. M., Kalam, M. A., Masjuki, H. H., Mofijur, M., Rasul, M. G., Zulkifli, N. W. M. 2016. Performance and emission characteristics of a dieselengine fueled with palm, jatropha, and moringa oil methyl ester Industrial Crops and Products (ISI-Cited Publication)

Sanjid, A., Kalam, M. A., Masjuki, H. H., Varman, M., Zulkifli, N., Abedin, M. J. 2016. Performance and emission of multi-cylinder diesel engine usingbiodiesel blends obtained from mixed inedible feedstocks Journal of Cleaner Production (ISI-Cited Publication)

Abedin, M. J., Kalam, M. A., Masjuki, H. H., Sabri, M. F. M., Rahman, S. M. A., Sanjid, A., Fattah, I. M. R. 2016. Production of biodiesel from a non-edible source and study of its combustion, and emission characteristics: A comparative study with B5 Renewable Energy (ISI-Cited Publication)

Ruhul, A. M., Kalam, M. A., Masjuki, H. H., Alabdulkarem, A., Atabani, A. E., Fattah, I. M. R., Abedin, M. J. 2016. Production, characterization, engineperformance and emission characteristics of Croton megalocarpus and Ceiba pentandra complementary blends in a single-cylinder diesel engine RscAdvances (ISI-Cited Publication)

Ashraful, A. M., Masjuki, H. H., Kalam, M. A. 2015. Particulate matter, carbon emissions and elemental compositions from a diesel engine exhaustfuelled with diesel-biodiesel blends Atmospheric Environment. (Tier 1, Impact Factor = 3.281) (ISI-Cited Publication)

Arbab, M. I., Varman, M., Masjuki, H. H., Kalam, M. A., Imtenan, S., Sajjad, H., & Rizwanul Fattah, I. M. (2015). Evaluation of combustion, performance,and emissions of optimum palm coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Conversion andManagement, 90(0), 111-120. doi: http://dx.doi.org/10.1016/j.enconman.2014.11.017 (ISI-Cited Publication)


M. Gulzar, H.H. Masjuki, M.A. Kalam, M. Varman, I.M. Rizwanul Fattah, Oil filter modification for biodiesel fueled engine: A pathway to lubricantsustainability and exhaust emissions reduction, Energy Conversion and Management, 91 (2015) 168-175. (ISI-Cited Publication)


Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Rashed, M. M., Rashedul, H. K., . . . Mosarof, M. H. (2015). A comprehensive review onthe assessment of fuel additive effects on combustion behavior in CI engine fuelled with diesel biodiesel blends. [10.1039/C5RA09563H]. RSCAdvances, 5(83), 67541-67567. (ISI-Cited Publication)


M. Habibullah, I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, Effects of Palm Coconut Biodiesel Blends on the Performance and Emission of a Single-Cylinder Diesel Engine, Energy & Fuels, 29 (2015) 734-743 (ISI-Cited Publication)


Masum, B. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., & Habibullah, M. (2015). Effect of alcohol gasoline blends optimization on fuel properties,performance and emissions of a SI engine. Journal of Cleaner Production, 86(0), 230-237. doi: http://dx.doi.org/10.1016/j.jclepro.2014.08.032 (ISI-CitedPublication)


R. Zahid, H.H. Masjuki, M. Varman, R. Mufti, M.A. Kalam, M. Gulzar, Effect of Lubricant Formulations on the Tribological Performance of Self-MatedDoped DLC Contacts: a review, Tribol Lett, 58 (2015) 1-28 (ISI-Cited Publication)


S. Hossain, H.H. Masjuki, M. Varman, M.A. Kalam, S.M.A. Rahman, Comparative evaluation of the blends of gas-to-liquid (GTL) fuels and biodieselswith diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants, RSC Advances, 5 (2015) 13068-13077 (ISI-Cited Publication)











N Abdullah, MH Elsheikh, NMJ Nik Ibrahim, S Mohd Said, MF Mohd Sabri, HH Masjuki and A Marlina, Magnetic, thermal, mesomorphic andthermoelectric properties of mononuclear, dimeric and polymeric iron(II) complexes with conjugated ligands, RSC Adv., 2015, DOI:10.1039/C5RA07100C (2015) (ISI-Cited Publication)

S.A. Shahir, H.H. Masjuki, M.A. Kalam, A. Imran, A.M. Ashraful, Performance and emission assessment of diesel biodiesel ethanol/bioethanol blend as afuel in diesel engines: A review, Renewable and Sustainable Energy Reviews, 48 (2015) 62-78. (ISI-Cited Publication)


A. Sanjid, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M.J. Abedin, I.M.R. Fattah, Characterization and prediction of blend properties and evaluation ofengine performance and emission parameters of a CI engine operated with various biodiesel blends, RSC Advances, 5 (2015) 13246-13255 (ISI-CitedPublication)


S. Imtenan, H.H. Masjuki, M. Varman, I.M. Rizwanul Fattah, Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend, RSC Advances, 5 (2015) 17160-17170 (ISI-Cited Publication)


M.A. Wakil, M.A. Kalam, H.H. Masjuki, A.E. Atabani, I.M. Rizwanul Fattah, Influence of biodiesel blending on physicochemical properties and importanceof mathematical model for predicting the properties of biodiesel blend, Energy Conversion and Management, 94 (2015) 51-67. (ISI-Cited Publication)


Habibullah, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mofijur, M., Mobarak, H. M., & Ashraful, A. M. (2015). Potential of biodiesel as arenewable energy source in Bangladesh. Renewable and Sustainable Energy Reviews, 50(0), 819-834. (ISI-Cited Publication)


M. Mofijur, H.H. Masjuki, M.A. Kalam, S.M. Ashrafur Rahman, H.M. Mahmudul, Energy scenario and biofuel policies and targets in ASEAN countries,Renewable and Sustainable Energy Reviews, 46 (2015) 51-61 (ISI-Cited Publication)


Sanjid, A., Kalam, M. A., Masjuki, H. H., Varman, M., Zulkifli, N. W. B. M., & Abedin, M. J. Performance and emission of multi-cylinder diesel engineusing biodiesel blends obtained from mixed inedible feedstocks. Journal of Cleaner Production. doi: http://dx.doi.org/10.1016/j.jclepro.2015.07.154 (ISI-Cited Publication)


S.M. Palash, H.H. Masjuki, M.A. Kalam, A.E. Atabani, I.M. Rizwanul Fattah, A. Sanjid, Biodiesel production, characterization, diesel engine performance,and emission characteristics of methyl esters from Aphanamixis polystachya oil of Bangladesh, Energy Conversion and Management, 91 (2015) 149-157. (ISI-Cited Publication)


S. Imtenan, H.H. Masjuki, M. Varman, I.M. Rizwanul Fattah, H. Sajjad, M.I. Arbab, Effect of n-butanol and diethyl ether as oxygenated additives oncombustion emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel jatropha biodiesel blend, Energy Conversion andManagement, 94 (2015) 84-94 (ISI-Cited Publication)


H. Sajjad , H. H. Masjuki, M. Varman, M. A. Kalam, M. I. Arbab, S. Imtenan, and A. M. Ashraful. "Influence of gas-to-liquid (GTL) fuel in the blends ofCalophyllum inophyllum biodiesel and diesel: An analysis of combustion performance emission characteristics." Energy Conversion and Management 97(2015): 42-52. (ISI-Cited Publication)


Rashed, M. M., Kalam, M. A., Masjuki, H. H., Rashedul, H. K., Ashraful, A. M., Shancita, I., & Ruhul, A. M. (2015). Stability of biodiesel, its improvementand the effect of antioxidant treated blends on engine performance and emission. RSC Advances, 5(46),36240-36261. (ISI-Cited Publication)


M. Gulzar, H.H. Masjuki, M. Varman, M.A. Kalam, R.A. Mufti, N.W.M. Zulkifli, R. Yunus, R. Zahid, Improving the AW/EP ability of chemically modifiedpalm oil by adding CuO and MoS2 nanoparticles, Tribology International. (ISI-Cited Publication)


Wan Ghazali, W. N. M., Mamat, R., Masjuki, H. H., & Najafi, G. (2015). Effects of biodiesel from different feedstocks on engine performance andemissions: A review. Renewable and Sustainable Energy Reviews, 51, 585-602. (ISI-Cited Publication)


A.S. Silitonga, H.H. Masjuki, T.M. Indra Mahlia, Ong H.C., F. Kusumo, H.B Aditiya, N.N.N Ghazali (2015). Schleichera oleosa L oil as feedstock forbiodiesel production, Fuel. (ISI-Cited Publication)

















K.A.H. Al Mahmud, M.A. Kalam, H.H. Masjuki, H.M. Mobarak, N.W.M. Zulkifli, An updated overview of diamond-like carbon coating in tribology, CriticalReviews in Solid State and Materials Sciences, 40 (2014) 90-118. (ISI-Cited Publication)


Habibullah, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mofijur, M., Mobarak, H. M., Ashraful, A. M. 2015. Potential of biodiesel as a renewableenergy source in Bangladesh Renewable Sustainable Energy Reviews (ISI-Cited Publication)


Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Ong, H. C., Kusumo, F., Aditiya, H. B., Ghazali, N. N. N. 2015. Schleichera oleosa L oil as feedstock forbiodiesel production Fuel (ISI-Cited Publication)


Rashed, M. M., Kalam, M. A., Masjuki, H. H., Rashedul, H. K., Ashraful, A. M., Shancita, I., Ruhul, A. M. 2015. Stability of biodiesel, its improvement andthe effect of antioxidant treated blends on engine performance and emission Rsc Advances (ISI-Cited Publication)


Habibullah, M., Masjuki, H. H., Kalam, M. A., Gulzar, M., Arslan, A., Zahid, R. 2015. Tribological Characteristics of Calophyllum inophyllum-Based TMP(Trimethylolpropane) Ester as Energy-Saving and Biodegradable Lubricant Tribology Transactions (ISI-Cited Publication)


Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Abdollah, M. F. B. 2015. Tribological Study of a Tetrahedral Diamond-Like Carbon Coating underVegetable Oil-Based Lubricated Condition Tribology Transactions (ISI-Cited Publication)


Ghosh, S., Choudhury, D., Roy, T., Bin Mamat, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological investigation of diamond-like carbon coatedmicro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid Science and Technology of Advanced Materials (ISI-CitedPublication)


Ghosh, S., Choudhury, D., Roy, T., Moradi, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological performance of the biological components ofsynovial fluid in artificial joint implants Science and Technology of Advanced Materials (ISI-Cited Publication)

Mofijur, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mahmudul, H. M. 2015. Energy scenario and biofuel policies and targets in ASEANcountries Renewable Sustainable Energy Reviews (ISI-Cited Publication)

Gulzar, M., Masjuki, H. H., Varman, M., Kalam, M. A., Mufti, R. A., Zulkifli, N. W. M., Yunus, R., Zahid, R. 2015. Improving the AW/EP ability ofchemically modified palm oil by adding CuO and MoS2 nanoparticles Tribology International (ISI-Cited Publication)

Wakil, M. A., Kalam, M. A., Masjuki, H. H., Atabani, A. E., Fattah, I. M. R. 2015. Influence of biodiesel blending on physicochemical properties andimportance of mathematical model for predicting the properties of biodiesel blend Energy Conversion and Management (ISI-Cited Publication)

Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Ashraful, A. M. 2015. Influence of gas-to-liquid (GTL) fuel in the blends ofCalophyllum inophyllum biodiesel and diesel: An analysis of combustion-performance-emission characteristics Energy Conversion andManagement (ISI-Cited Publication)

Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rashedul, H. K. 2015. Influence of gas-to-liquid (GTL) fuel in thecombined blend of Jatropha biodiesel and diesel: an analysis of engine combustion-performance-emission parameters Rsc Advances (ISI-CitedPublication)

Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Abdollah, M. F. B. 2015. Tribological Study of a Tetrahedral Diamond-Like Carbon Coating underVegetable Oil-Based Lubricated Condition Tribology Transactions (ISI-Cited Publication)

Ghosh, S., Choudhury, D., Roy, T., Bin Mamat, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological investigation of diamond-like carbon coatedmicro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid Science and Technology of Advanced Materials (ISI-CitedPublication)

Ghosh, S., Choudhury, D., Roy, T., Moradi, A., Masjuki, H. H., Pingguan-Murphy, B. 2015. Tribological performance of the biological components ofsynovial fluid in artificial joint implants Science and Technology of Advanced Materials (ISI-Cited Publication)

Monirul, I. M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Rashedul, H. K., Rashed, M. M., Imdadul, H. K., Mosarof, M. H. 2015. A comprehensivereview on biodiesel cold flow properties and oxidation stability along with their improvement processes Rsc Advances (ISI-Cited Publication)

Imdadul, H. K., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Rashed, M. M., Rashedul, H. K., Monirul, I. M., Mosarof, M. H. 2015. A comprehensive











review on the assessment of fuel additive effects on combustion behavior in CI engine fuelled with diesel biodiesel blends Rsc Advances (ISI-CitedPublication)

Al Mahmud, K. A. H., Kalam, M. A., Masjuki, H. H., Mobarak, H. M., Zulkifli, N. W. M. 2015. An updated overview of diamond-like carbon coating intribology Critical Reviews in Solid State and Materials Sciences (ISI-Cited Publication)

Palash, S. M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Fattah, I. M. R., Sanjid, A. 2015. Biodiesel production, characterization, diesel engineperformance, and emission characteristics of methyl esters from Aphanamixis polystachya oil of Bangladesh Energy Conversion and Management (ISI-Cited Publication)

Sanjid, A., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Abedin, M. J., Fattah, I. M. R. 2015. Characterization and prediction of blend properties andevaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends Rsc Advances (ISI-Cited Publication)

Teoh, Y. H., Masjuki, H. H., Kalam, M. A., How, H. G. 2015. Comparative assessment of performance, emissions and combustion characteristics ofgasoline/diesel and gasoline/biodiesel in a dual-fuel engine Rsc Advances (ISI-Cited Publication)

Hossain, S., Masjuki, H. H., Varman, M., Kalam, M. A., Rahman, S. M. A. 2015. Comparative evaluation of the blends of gas-to-liquid (GTL) fuels andbiodiesels with diesel at high idling conditions: an in-depth analysis on engine performance and environment pollutants Rsc Advances (ISI-CitedPublication)

Zahid, R., Masjuki, H. H., Varman, M., Mufti, R. A., Kalam, M. A., Gulzar, M. 2015. Effect of Lubricant Formulations on the Tribological Performance ofSelf-Mated Doped DLC Contacts: a review Tribology Letters (ISI-Cited Publication)

Masum, S. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., Habibullah, M. 2015. Effect of alcohol-gasoline blends optimization on fuel properties,performance and emissions of a SI engine Journal of Cleaner Production (ISI-Cited Publication)

Teoh, Y. H., Masjuki, H. H., Kalam, M. A., How, H. G. 2015. Effect of injection timing and EGR on engine-out-responses of a common-rail diesel enginefueled with neat biodiesel Rsc Advances (ISI-Cited Publication)

Imtenan, S., Masjuki, H. H., Varman, M., Fattah, I. M. R., Sajjad, H., Arbab, M. I. 2015. Effect of n-butanol and diethyl ether as oxygenated additives oncombustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend Energy Conversion andManagement (ISI-Cited Publication)

Habibullah, M., Fattah, I. M. R., Masjuki, H. H., Kalam, M. A. 2015. Effects of Palm-Coconut Biodiesel Blends on the Performance and Emission of aSingle-Cylinder Diesel Engine Energy Fuels (ISI-Cited Publication)

Mofijur, M., Masjuki, H. H., Kalam, M. A., Rahman, S. M. A., Mahmudul, H. M. 2015. Energy scenario and biofuel policies and targets in ASEANcountries Renewable Sustainable Energy Reviews (ISI-Cited Publication)

Teoh, Y. H., Masjuki, H. H., Noor, I. M., Ali, B. S., Kalam, M. A., How, H. G. 2015. Evaluation of a novel biofuel from unwanted waste and its impact onengine performance, emissions, and combustion characteristics in a diesel engine Rsc Advances (ISI-Cited Publication)

Arbab, M. I., Varman, M., Masjuki, H. H., Kalam, M. A., Imtenan, S., Sajjad, H., Fattah, I. M. R. 2015. Evaluation of combustion, performance, andemissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine Energy Conversion andManagement (ISI-Cited Publication)

Imtenan, S., Masjuki, H. H., Varman, M., Fattah, I. M. R. 2015. Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend Rsc Advances (ISI-Cited Publication)

Habibullah, M., Masjuki, H. H., Kalam, M. A., Zulkifli, N. W. M., Masum, B. M., Arslan, A., Gulzar, M. 2015. Friction and wear characteristics ofCalophyllum inophyllum biodiesel Industrial Crops and Products (ISI-Cited Publication)

Mosarof, M. H., Kalam, M. A., Masjuki, H. H., Ashraful, A. M., Rashed, M. M., Imdadul, H. K., Monirul, I. M. 2015. Implementation of palm biodieselbased on economic aspects, performance, emission, and wear characteristics Energy Conversion and Management (ISI-Cited Publication)

Wakil, M. A., Kalam, M. A., Masjuki, H. H., Atabani, A. E., Fattah, I. M. R. 2015. Influence of biodiesel blending on physicochemical properties andimportance of mathematical model for predicting the properties of biodiesel blend Energy Conversion and Management (ISI-Cited Publication)

Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Ashraful, A. M. 2015. Influence of gas-to-liquid (GTL) fuel in the blends ofCalophyllum inophyllum biodiesel and diesel: An analysis of combustion-performance-emission characteristics Energy Conversion andManagement (ISI-Cited Publication)

Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rashedul, H. K. 2015. Influence of gas-to-liquid (GTL) fuel in thecombined blend of Jatropha biodiesel and diesel: an analysis of engine combustion-performance-emission parameters Rsc Advances (ISI-CitedPublication)



2014

Gulzar, M., Masjuki, H. H., Kalam, M. A., Varman, M., Fattah, I. M. R. 2015. Oil filter modification for biodiesel-fueled engine: A pathway to lubricantsustainability and exhaust emissions reduction Energy Conversion and Management (ISI-Cited Publication)

Atabani, A. E., Badruddin, I. A., Masjuki, H. H., Chong, W. T., Lee, K. T. 2015. Pangium edule Reinw: A Promising Non-edible Oil Feedstock forBiodiesel Production Arabian Journal for Science and Engineering (ISI-Cited Publication)

Fazal, M. A., Haseeb, A., Masjuki, H. H. 2014. A critical review on the tribological compatibility of automotive materials in palm biodiesel EnergyConversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Cited Publication)

Shancita, I., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Rashed, M. M., Rashedul, H. K. 2014. A review on idling reduction strategies to improve fueleconomy and reduce exhaust emissions of transport vehicles Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Cited Publication)

Ahmed, S., Hassan, M. H., Kalam, M. A., Rahman, S. M. A., Abedin, M. J., Shahir, A. 2014. An experimental investigation of biodiesel production,characterization, engine performance, emission and noise of Brassica juncea methyl ester and its blends Journal of Cleaner Production. (Tier 1, ImpactFactor = 3.59) (ISI-Cited Publication)

Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., Rahman, M. M. 2014. Assessing idling effects on a compression ignitionengine fueled with Jatropha and Palm biodiesel blends Renewable Energy. (Tier 2, Impact Factor = 3.361) (ISI-Cited Publication)

Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Sanjid, A., Abedin, M. J. 2014. Assessment of emission and performance of compression ignitionengine with varying injection timing Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.51) (ISI-Cited Publication)

Habibullah, M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Ashraful, A. M., Mobarak, H. M. 2014. Biodiesel production and performance evaluation ofcoconut, palm and their combined blend with diesel in a single-cylinder diesel engine Energy Conversion and Management. (Tier 1, Impact Factor =3.59) (ISI-Cited Publication)

Sanjid, A., Kalam, M. A., Masjuki, H. H., Rahman, S. M. A., Abedin, M. J. 2014. Combustion, performance and emission characteristics of a DI dieselengine fueled with Brassica juncea methyl ester and its blends Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Cited Publication)

Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Ashraful, A. M. 2014. Combustion, performance, and emission characteristics of low heatrejection engine operating on various biodiesels and vegetable oils Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-CitedPublication)

Mofijur, M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Fattah, I. M. R., Mobarak, H. M. 2014. Comparative evaluation of performance and emissioncharacteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine Industrial Crops and Products. (Tier 1, Impact Factor = 3.208) (ISI-Cited Publication)

Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rashed, M. M. 2014. Comparative study of gas-to-liquid fuel, B5 dieseland their blends with respect to fuel properties, engine performance and exhaust emissions Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-CitedPublication)

Atabani, A. E., Mofijur, M., Masjuki, H. H., Badruddin, I. A., Kalam, M. A., Chong, W. T. 2014. Effect of Croton megalocarpus, Calophyllum inophyllum,Moringa oleifera, palm and coconut biodiesel-diesel blending on their physico-chemical properties Industrial Crops and Products. (Tier 1, Impact Factor= 3.208) (ISI-Cited Publication)

Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Mofijur, M., Abedin, M. J. 2014. Effect of antioxidant on the performance and emission characteristics of adiesel engine fueled with palm biodiesel blends Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Cited Publication)

Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Hazrat, M. A., Masum, B. M., Imtenan, S., Ashraful, A. M. 2014. Effect of antioxidants on oxidation stabilityof biodiesel derived from vegetable and animal based feedstocks Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor = 5.51) (ISI-CitedPublication)

Sajjad, H., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Imtenan, S., Rahman, S. M. A. 2014. Engine combustion, performance and emissioncharacteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel Renewable Sustainable Energy Reviews. (Tier 1, Impact Factor =5.51) (ISI-Cited Publication)

Wakil, M. A., Kalam, M. A., Masjuki, H. H., Fattah, I. M. R., Masum, B. M. 2014. Evaluation of rice bran, sesame and moringa oils as feasible sources ofbiodiesel and the effect of blending on their physicochemical properties Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Cited Publication)

Abedin, M. J., Masjuki, H. H., Kalam, M. A., Varman, M., Arbab, M. I., Fattah, I. M. R., Masum, B. M. 2014. Experimental Investigation of a MulticylinderUnmodified Diesel Engine Performance, Emission, and Heat Loss Characteristics Using Different Biodiesel Blends: Rollout of B10 in Malaysia ScientificWorld Journal. (Tier 2, Impact Factor = 1.219) (ISI-Cited Publication)



Fattah, I. M. R., Masjuki, H. H., Kalam, M. A., Wakil, M. A., Ashraful, A. M., Shahir, S. A. 2014. Experimental investigation of performance and regulatedemissions of a diesel engine with Calophyllum inophyllum biodiesel blends accompanied by oxidation inhibitors Energy Conversion andManagement. (Tier 1, Impact Factor = 3.59) (ISI-Cited Publication)

Shahir, S. A., Masjuki, H. H., Kalam, M. A., Imran, A., Fattah, I. M. R., Sanjid, A. 2014. Feasibility of diesel-biodiesel-ethanol/bioethanol blend as existingCI engine fuel: An assessment of properties, material compatibility, safety and combustion Renewable Sustainable Energy Reviews. (Tier 1, ImpactFactor = 5.51) (ISI-Cited Publication)

Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R. 2014. Impact of biodiesel blend on injector deposit formation Energy. (Tier 1, Impact Factor= 4.159) (ISI-Cited Publication)

Masum, B. M., Kalam, M. A., Masjuki, H. H., Rahman, S. M. A., Daggig, E. E. 2014. Impact of denatured anhydrous ethanol-gasoline fuel blends on aspark-ignition engine Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Cited Publication)

Imtenan, S., Varman, M., Masjuki, H. H., Kalam, M. A., Sajjad, H., Arbab, M. I., Fattah, I. M. R. 2014. Impact of low temperature combustion attainingstrategies on diesel engine emissions for diesel and biodiesels: A review Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-CitedPublication)

Imtenan, S., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Sajjad, H., Rahman, S. M. A. 2014. Impact of oxygenated additives to palm andjatropha biodiesel blends in the context of performance and emissions characteristics of a light-duty diesel engine Energy Conversion andManagement. (Tier 1, Impact Factor = 3.59) (ISI-Cited Publication)

Palash, S. M., Kalam, M. A., Masjuki, H. H., Arbab, M. I., Masum, B. M., Sanjid, A. 2014. Impacts of NOx reducing antioxidant additive on performanceand emissions of a multi-cylinder diesel engine fueled with Jatropha biodiesel blends Energy Conversion and Management. (Tier 1, Impact Factor =3.59) (ISI-Cited Publication)

Ashraful, A. M., Masjuki, H. H., Kalam, M. A., Rashedul, H. K., Sajjad, H., Abedin, M. J. 2014. Influence of anti-corrosion additive on the performance,emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel Energy Conversion and Management. (Tier1, Impact Factor = 3.59) (ISI-Cited Publication)

Rashedul, H. K., Kalam, M. A., Masjuki, H. H., Ashraful, A. M., Imtenan, S., Sajjad, H., Wee, L. K. 2014. Numerical study on convective heat transfer of aspark ignition engine fueled with bioethanol International Communications in Heat and Mass Transfer. (Tier 1, Impact Factor = 2.124) (ISI-CitedPublication)

Rahman, M. M., Hassan, M. H., Kalam, M. A., Atabani, A. E., Memon, L. A., Rahman, S. M. A. 2014. Performance and emission analysis of Jatrophacurcas and Moringa oleifera methyl ester fuel blends in a multi-cylinder diesel engine Journal of Cleaner Production. (Tier 1, Impact Factor = 3.59) (ISI-Cited Publication)

Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Ashraful, A. M., Rashed, M. M., Sanchita, I., Shaon, T. 2014. Performance and emission characteristics ofa compression ignition engine running with linseed biodiesel Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Cited Publication)

Arbab, M. I., Masjuki, H. H., Varman, M., Kalam, M. A., Sajjad, H., Imtenan, S. 2014. Performance and emission characteristics of a diesel engine fueledby an optimum biodiesel-biodiesel blend Rsc Advances. (Tier 1, Impact Factor = 3.708) (ISI-Cited Publication)

Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Rahman, S. M. A., Fattah, I. M. R. 2014. Performance, emissions, and heat losses of palm andjatropha biodiesel blends in a diesel engine Industrial Crops and Products. (Tier 1, Impact Factor = 3.208) (ISI-Cited Publication)

Shafie, S. M., Masjuki, H. H., Mahlia, T. M. I. 2014. Rice straw supply chain for electricity generation in Malaysia: Economical and environmentalassessment Applied Energy. (Tier 1, Impact Factor = 5.261) (ISI-Cited Publication)

Fattah, I. M. R., Hassan, M. H., Kalam, M. A., Atabani, A. E., Abedin, M. J. 2014. Synthetic phenolic antioxidants to biodiesel: path toward NOx reductionof an unmodified indirect injection diesel engine Journal of Cleaner Production. (Tier 1, Impact Factor = 3.59) (ISI-Cited Publication)

Masum, B. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., Wakil, M. A., Imtenan, S. 2014. Tailoring the key fuel properties using different alcohols (C-2-C-6) and their evaluation in gasoline engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Cited Publication)

Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Ashraful, A. M., Rahman, S. M. A., Shahir, S. A. 2014. The effect of additives on properties, performanceand emission of biodiesel fuelled compression ignition engine Energy Conversion and Management. (Tier 1, Impact Factor = 3.59) (ISI-Cited Publication)

Al Mahmud, K. A. H., Varman, M., Kalam, M. A., Masjuki, H. H., Mobarak, H. M., Zulkifli, N. W. M. 2014. Tribological characteristics of amorphoushydrogenated (a-C:H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricatingoil Surface Coatings Technology. (Tier 1, Impact Factor = 2.199) (ISI-Cited Publication)

Mobarak, H. M., Masjuki, H. H., Mohamad, E. N., Kalam, M. A., Rashedul, H. K., Rashed, M. M., Habibullah, M. 2014. Tribological properties ofamorphous hydrogenated (a-C:H) and hydrogen-free tetrahedral (ta-C) diamond-like carbon coatings under jatropha biodegradable lubricating oil at



different temperatures Applied Surface Science. (Tier 1, Impact Factor = 2.538) (ISI-Cited Publication)

Sajjad H, Masjuki HH, Varman M, Kalam MA, Arbab MI, Imtenan S, et al. Engine combustion, performance and emission characteristics of gas to liquid(GTL) fuels and its blends with diesel and bio-diesel. Renewable and Sustainable Energy Reviews. 2014;30(0):961-86. (ISI-Cited Publication)

Mofijur M, Masjuki HH, Kalam MA, Atabani AE, Fattah IMR, Mobarak HM. (2014) Comparative evaluation of performance and emission characteristics ofMoringa oleifera and Palm oil based biodiesel in a diesel engine. Industrial Crops and Products, 53;78-84. (ISI-Cited Publication)


I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, M.A. Hazrat, B.M. Masum, S. Imtenan, A.M. Ashraful, Effect of antioxidants on oxidation stability ofbiodiesel derived from vegetable and animal based feedstocks, Renewable and Sustainable Energy Reviews, 30 (2014) 356-370. (ISI-Cited Publication)

M. Hamid Elsheikh, D.A. Shnawah, M.F.M. Sabri, S.B.M. Said, M. Haji Hassan, M.B. Ali Bashir, M. Mohamad, A review on thermoelectric renewableenergy: Principle parameters that affect their performance, Renewable and Sustainable Energy Reviews, 30 (2014) 337-355. (ISI-Cited Publication)

S.M. Palash, M.A. Kalam, H.H. Masjuki, M.I. Arbab, B.M. Masum, A. Sanjid, Impacts of NOx reducing antioxidant additive on performance andemissions of a multi-cylinder diesel engine fueled with Jatropha biodiesel blends, Energy Conversion and Management, 77 (2014) 577-585. (ISI-CitedPublication)

A. Sanjid, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M.J. Abedin, S.M. Palash, Production of palm and jatropha based biodiesel and investigation ofpalm- jatropha combined blend properties, performance, exhaust emission and noise in an unmodified diesel engine, Journal of Cleaner Production, 65(2014) 295- 303. (ISI/SCOPUS Cited Publication)


I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, M. Mofijur, M.J. Abedin, Effect of antioxidant on the performance and emission characteristics of adiesel engine fueled with palm biodiesel blends, Energy Conversion and Management, 79 (2014) 265-272. (ISI/SCOPUS Cited Publication)


How, H. G., Masjuki, H. H., Kalam, M. A., & Teoh, Y. H. An investigation of the engine performance, emissions and combustion characteristics ofcoconut biodiesel in a high-pressure common-rail diesel engine. Energy(0). doi:http://dx.doi.org/10.1016/j.energy.2014.03.070 (ISI-Cited Publication)


Shafie, S. M., Masjuki, H. H., & Mahlia, T. M. I. Life cycle assessment of rice straw-based power generation in Malaysia. Energy(0). doi:http://dx.doi.org/10.1016/j.energy.2014.04.014 (ISI-Cited Publication)


Imtenan, S., Masjuki, H. H., Varman, M., Kalam, M. A., Arbab, M. I., Sajjad, H., & Ashrafur Rahman, S. M. (2014). Impact of oxygenated additives topalm and jatropha biodiesel blends in the context of performance and emissions characteristics of a light-duty diesel engine. Energy Conversion andManagement, 83(0), 149- 158. doi:http://dx.doi.org/10.1016/j.enconman.2014.03.052 (ISI-Cited Publication)


Ashraful, A. M., Masjuki, H. H., Kalam, M. A., Rashedul, H. K., Sajjad, H., & Abedin, M. J. (2014). Influence of anti-corrosion additive on theperformance, emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel. Energy Conversion andManagement, 87(0), 48-57. doi: http://dx.doi.org/10.1016/j.enconman.2014.06.093 (ISI-Cited Publication)

M.A. Fazal, A.S.M.A. Haseeb, H.H. Masjuki, A critical review on the tribological compatibility of automotive materials in palm biodiesel, EnergyConversion and Management, 79 (2014) 180-186. (ISI/SCOPUS Cited Publication)


I.M. Rizwanul Fattah, H.H. Masjuki, M.A. Kalam, M.A. Wakil, H.K. Rashedul, M.J. Abedin, Performance and emission characteristics of a CI enginefueled with Cocos nucifera and Jatropha curcas B20 blends accompanying antioxidants, Industrial Crops and Products, Volume 57, June 2014, Pages132-140, ISSN 0926-6690, (ISI-Cited Publication)


Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., & Ashraful, A. M. (2014). Combustion, performance, and emission characteristics of low heatrejection engine operating on various biodiesels and vegetable oils. Energy Conversion and Management, 85(0), 173-189. doi:http://dx.doi.org/10.1016/j.enconman.2014.05.065 (ISI-Cited Publication)

S. Imtenan, M. Varman, H.H. Masjuki, M.A. Kalam, H. Sajjad, M.I. Arbab, I.M. Rizwanul Fattah, Impact of low temperature combustion attainingstrategies on diesel engine emissions for diesel and biodiesels: A review, Energy Conversion and Management, 80 (2014) 329-356. (ISI/SCOPUS CitedPublication)


H.M. Mobarak, E. Niza Mohamad, H.H. Masjuki, M.A. Kalam, K.A.H. Al Mahmud, M. Habibullah, A.M. Ashraful, The prospects of biolubricants asalternatives in automotive applications, Renewable and Sustainable Energy Reviews, 33 (2014) 34-43 (ISI/SCOPUS Cited Publication)













Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., & Rahman, M. M. (2014). Assessing idling effects on a compression ignitionengine fueled with Jatropha and Palm biodiesel blends. Renewable Energy, 68(0), 644-650. doi: http://dx.doi.org/10.1016/j.renene.2014.02.050 (ISI-Cited Publication)


A.M. Ashraful, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M. Habibullah, M. Syazwan, Study of the Effect of Storage Time on the Oxidation andThermal Stability of Various Biodiesels and Their Blends, Energy & Fuels, 28 (2014) 1081-1089. (ISI/SCOPUS Cited Publication)


K.A.H. Al Mahmud, M. Varman, M.A. Kalam, H.H. Masjuki, H.M. Mobarak, N.W.M. Zulkifli, Tribological characteristics of amorphous hydrogenated (a-C:H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricating oil, Surface andCoatings Technology. (ISI/SCOPUS Cited Publication)


Liaquat, A. M., Masjuki, H. H., Kalam, M. A., & Rizwanul Fattah, I. M. (2014). Impact of biodiesel blend on injector deposit formation. Energy, 72(0), 813-823. doi: http://dx.doi.org/10.1016/j.energy.2014.06.006 (ISI-Cited Publication)


Ahmed, S., Hassan, M. H., Kalam, M. A., Ashrafur Rahman, S. M., Abedin, M. J., & Shahir, A. (2014). An experimental investigation of biodieselproduction, characterization, engine performance, emission and noise of Brassica juncea methyl ester and its blends. Journal of Cleaner Production,79(0), 74-81. doi: http://dx.doi.org/10.1016/j.jclepro.2014.05.019 (ISI-Cited Publication)

Mobarak, H. M., Masjuki, H. H., Mohamad, E. N., Kalam, M. A., Rashedul, H. K., Rashed, M. M., & Habibullah, M. Tribological properties of amorphoushydrogenated (a-C:H) and hydrogen-free tetrahedral (ta-C) diamond-like carbon coatings under jatropha biodegradable lubricating oil at differenttemperatures. Applied Surface Science(0). doi: http://dx.doi.org/10.1016/j.apsusc.2014.08.168 (ISI-Cited Publication)

Rashedul, H. K., Kalam, M. A., Masjuki, H. H., Ashraful, A. M., Imtenan, S., Sajjad, H., & Wee, L. K. (2014). Numerical study on convective heat transferof a spark ignition engine fueled with bioethanol. International Communications in Heat and Mass Transfer, 58(0), 33-39. doi:http://dx.doi.org/10.1016/j.icheatmasstransfer.2014.0 8.019 (ISI-Cited Publication)

Habibullah, M., Masjuki, H. H., Kalam, M. A., Rizwanul Fattah, I. M., Ashraful, A. M., & Mobarak, H. M. (2014). Biodiesel production and performanceevaluation of coconut, palm and their combined blend with diesel in a single-cylinder diesel engine. Energy Conversion and Management, 87(0), 250-257. doi: http://dx.doi.org/10.1016/j.enconman.2014.07.006 (ISI-Cited Publication)

Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Sanjid, A., & Abedin, M. J. (2014). Assessment of emission and performance of compression ignitionengine with varying injection timing. Renewable and Sustainable Energy Reviews, 35(0), 221-230. doi: http://dx.doi.org/10.1016/j.rser.2014.03.049 (ISI-Cited Publication)


S.M.A. Rahman, H.H. Masjuki, M.A. Kalam, M.J. Abedin, A. Sanjid, S. Imtenan, Effect of idling on fuel consumption and emissions of a diesel enginefueled by Jatropha biodiesel blends, Journal of Cleaner Production. (ISI/SCOPUS Cited Publication)


H.C. Ong, H.H. Masjuki, T.M.I. Mahlia, A.S. Silitonga, W.T. Chong, K.Y. Leong, Optimization of biodiesel production and engine performance from highfree fatty acid Calophyllum inophyllum oil in CI diesel engine, Energy Conversion and Management, 81 (2014) 30-40. (ISI/SCOPUS Cited Publication)


M.M. Rahman, M.H. Hassan, M.A. Kalam, A.E. Atabani, L.A. Memon, S.M.A. Rahman, Performance and emission analysis of Jatropha curcas andMoringa oleifera methyl ester fuel blends in a multi-cylinder diesel engine, Journal of Cleaner Production, 65 (2014) 304-310. (ISI/SCOPUS CitedPublication)


A.M. Ashraful, H.H. Masjuki, M.A. Kalam, I.M. Rizwanul Fattah, S. Imtenan, S.A. Shahir, H.M. Mobarak, Production and comparison of fuel properties,engine performance, and emission characteristics of biodiesel from various non-edible vegetable oils: A review, Energy Conversion and Management,80 (2014) 202-228. (ISI/SCOPUS Cited Publication)


Masum, B. M., Masjuki, H. H., Kalam, M. A., Palash, S. M., Wakil, M. A., & Imtenan, S. (2014). Tailoring the key fuel properties using different alcohols(C2 C6) and their evaluation in gasoline engine. Energy Conversion and Management, 88(0), 382-390. doi:http://dx.doi.org/10.1016/j.enconman.2014.08.050 (ISI-Cited Publication)

Rizwanul Fattah, I. M., Hassan, M. H., Kalam, M. A., Atabani, A. E., & Abedin, M. J. (2014). Synthetic phenolic antioxidants to biodiesel: path towardNOx reduction of an unmodified indirect injection diesel engine. Journal of Cleaner Production, 79(0), 82-90. doi:













http://dx.doi.org/10.1016/j.jclepro.2014.05.071 (ISI-Cited Publication)

Shafie, S. M., Masjuki, H. H., & Mahlia, T. M. I. (2014b). Rice straw supply chain for electricity generation in Malaysia: Economical and environmentalassessment. Applied Energy, 135(0), 299-308. doi: http://dx.doi.org/10.1016/j.apenergy.2014.08.101 (ISI-Cited Publication)

Rizwanul Fattah, I. M., Masjuki, H. H., Kalam, M. A., Wakil, M. A., Ashraful, A. M., & Shahir, S. A. (2014). Experimental investigation of performance andregulated emissions of a diesel engine with Calophyllum inophyllum biodiesel blends accompanied by oxidation inhibitors. Energy Conversion andManagement, 83(0), 232-240. doi: http://dx.doi.org/10.1016/j.enconman.2014.03.069 (ISI-Cited Publication)


Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Rahman, S. M. A., & Fattah, I. M. R. (2014). Performance, emissions, and heat losses of palmand jatropha biodiesel blends in a diesel engine. Industrial Crops and Products, 59(0), 96-104. doi: http://dx.doi.org/10.1016/j.indcrop.2014.05.001 (ISI-Cited Publication)

S.A. Shahir, H.H. Masjuki, M.A. Kalam, A. Imran, I.M.R. Fattah, A. Sanjid, Feasibility of diesel biodiesel ethanol/bioethanol blend as existing CI enginefuel: An assessment of properties, material compatibility, safety and combustion, Renewable and Sustainable Energy Reviews, 32 (2014) 379-395. (ISI/SCOPUS Cited Publication)


Mofijur, M., Masjuki, H. H., Kalam, M. A., Atabani, A. E., Arbab, M. I., Cheng, S. F., & Gouk, S. W. (2014). Properties and use of Moringa oleiferabiodiesel and diesel fuel blends in a multi-cylinder diesel engine. Energy Conversion and Management, 82(0), 169-176. doi:http://dx.doi.org/10.1016/j.enconman.2014.02.073 (ISI-Cited Publication)


N.W.M. Zulkifli, H.H. Masjuki, M.A. Kalam, R. Yunus, S.S.N. Azman. Lubricity of bio-based lubricant derived from chemically modified jatropha methylester. Jurnal Tribologi. 1: 18-39. (Non-ISI/Non-SCOPUS Cited Publication)


Atabani, A. E., Mofijur, M., Masjuki, H. H., Badruddin, I. A., Kalam, M. A., & Chong, W. T. (2014). Effect of Croton megalocarpus, Calophylluminophyllum, Moringa oleifera, palm and coconut biodiesel diesel blending on their physico-chemical properties. Industrial Crops and Products, 60(0),130-137. doi: http://dx.doi.org/10.1016/j.indcrop.2014.06.011 (ISI-Cited Publication)

Rashedul, H. K., Masjuki, H. H., Kalam, M. A., Ashraful, A. M., Ashrafur Rahman, S. M., & Shahir, S. A. (2014). The effect of additives on properties,performance and emission of biodiesel fuelled compression ignition engine. Energy Conversion and Management, 88(0), 348-364. doi:http://dx.doi.org/10.1016/j.enconman.2014.08.034 (ISI-Cited Publication)

B.M. Masum, M.A. Kalam, H.H. Masjuki, S.M.A. Rahman, E.E. Daggig, Impact of denatured anhydrous ethanol- gasoline fuel blends on a spark-ignitionengine, RSC Advances, 4 (2014) 51220-51227 (ISI-Cited Publication)


Teoh, Y. H., Masjuki, H. H., Kalam, M. A., Amalina, M. A., How, H. G. 2014. Effects of Jatropha biodiesel on the performance, emissions, andcombustion of a converted common-rail diesel engine Rsc Advances (ISI-Cited Publication)


Shancita, I., Masjuki, H. H., Kalam, M. A., Rizwanul Fattah, I. M., Rashed, M. M., & Rashedul, H. K. (2014). A review on idling reduction strategies toimprove fuel economy and reduce exhaust emissions of transport vehicles. Energy Conversion and Management, 88(0), 794-807. doi:http://dx.doi.org/10.1016/j.enconman.2014.09.036 (ISI-Cited Publication)


Sanjid, A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., & Rahman, S. M. A. (2014). Experimental Investigation of Mustard Biodiesel Blend Properties,Performance, Exhaust Emission and Noise in an Unmodified Diesel Engine. APCBEE Procedia, 10(0), 149-153. doi:http://dx.doi.org/10.1016/j.apcbee.2014.10.033 (SCOPUS-Cited Publication)

Atabani, A. E., Irfan Anjum Badruddin, H. H. Masjuki, W. T. Chong, and Keat Teong Lee. "Pangium edule Reinw: A Promising Non-edible Oil Feedstockfor Biodiesel Production." Arabian Journal for Science and Engineering (2014): 1-12. (ISI-Cited Publication)

Rahman, SM Ashrafur, Hassan Masjuki, Md Kalam, M. J. Abedin, A. Sanjid, S. Imtenan, and M. I. Arbab. Assessing Effects of Idling of a Diesel EngineOperated with Optimized Blend of Palm and Mustard Biodiesel. No. 2014-01-1936. SAE Technical Paper, 2014. (SCOPUS-Cited Publication)


Teoh, Y. H., H. H. Masjuki, M. A. Kalam, M. A. Amalina, and H. G. How. "Impact of Premixed Kerosene Fuel on Performance, Emission and CombustionCharacteristics in Partial HCCI Engine." Energy Procedia 61 (2014): 1830-1834. (SCOPUS-Cited Publication)












H.M. Mobarak, H.H. Masjuki, E.N. Mohamad, S.M.A. Rahman, K.A.H.A. Mahmud, M. Habibullah, S. Salauddin, Effect of DLC Coating on TribologicalBehavior of Cylinder Liner-piston Ring Material Combination When Lubricated with Jatropha Oil, Procedia Engineering, 90 (2014) 733-739 (SCOPUS-Cited Publication)


MLA Abdullah, M. Adlan, Farid Nasir Ani, and Masjuki Hassan. "The Effects of Injection Parameters on the Performance of Common Rail Light DutyEngine Fueled with Palm Oil Biodiesel." Applied Mechanics and Materials 465 (2014): 322-326. (SCOPUS-Cited Publication)

Silitonga, A. S., Hwai Chyuan Ong, T. M. I. Mahlia, H. H. Masjuki, and W. T. Chong. "Biodiesel Conversion from High FFA Crude Jatropha Curcas,Calophyllum Inophyllum and Ceiba Pentandra Oil." Energy Procedia 61 (2014): 480-483. (SCOPUS-Cited Publication)


Habibullah, M., H. H. Masjuki, M. A. Kalam, A. M. Ashraful, K. A. H. Al Mahmud, and H. M. Mobarak. "Comparative Study of Properties and EnginePerformance Using Blend of Palm and Coconut Biodiesel." In Applied Mechanics and Materials, vol. 663, pp. 13-18. 2014. (SCOPUS-Cited Publication)

Al Mahmud, K. A. H., M. A. Kalam, M. F. M. Sabri, H. H. Masjuki, and M. M. Rashed. "Tribological Characteristics of Tetrahedral (ta-C) DLC Coating inthe Presence of Commercial Lubricating Oil." In Applied Mechanics and Materials, vol. 679, pp. 25- 29. 2014. (SCOPUS-Cited Publication)

A. Sanjid, M.A. Kalam, H.H. Masjuki, S.M.A. Rahman, M.J. Abedin, Combustion, performance and emission characteristics of a DI diesel engine fueledwith Brassica juncea methyl ester and its blends, RSC Advances, 4 (2014) 36973-36982 (ISI-Cited Publication)


How, H. G., Masjuki, H. H., Kalam, M. A., Teoh, Y. H. 2014. An investigation of the engine performance, emissions and combustion characteristics ofcoconut biodiesel in a high-pressure common-rail diesel engine Energy (ISI-Cited Publication)


Fattah, I. M. R., Kalam, M. A., Masjuki, H. H., Wakil, M. A. 2014. Biodiesel production, characterization, engine performance, and emissioncharacteristics of Malaysian Alexandrian laurel oil Rsc Advances (ISI-Cited Publication)


Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., Imtenan, S. 2014. Effect of idling on fuel consumption and emissions fueled byJatropha biodiesel blends of a diesel engine Journal of Cleaner Production (ISI-Cited Publication)


Ong, H. C., Masjuki, H. H., Mahlia, T. M. I., Silitonga, A. S., Chong, W. T., Yusaf, T. 2014. Engine performance and emissions using Jatropha curcas,Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine Energy (ISI-Cited Publication)


Golshokouh, I., Syahrullail, S., Ani, F. N., Masjuki, H. H. 2014. INVESTIGATION OF PALM FATTY ACID DISTILLATE OIL AS AN ALTERNATIVE TOPETROCHEMICAL- BASED LUBRICANTS Journal of Oil Palm Research (ISI-Cited Publication)

Ahamed, J. U., Saidur, R., Masjuki, H. H. 2014. Investigation of Environmental and Heat Transfer Analysis of Air Conditioner Using Hydrocarbon MixtureCompared to R-22 Arabian Journal for Science and Engineering (ISI-Cited Publication)

B.M. Masum, M.A. Kalam, H.H. Masjuki, S.M. Palash, I.M.R. Fattah, Performance and emission analysis of a multi cylinder gasoline engine operating atdifferent alcohol-gasoline blends, RSC Advances, 4 (2014) 27898- 27904 (ISI-Cited Publication)


How, H. G., H. H. Masjuki, M. A. Kalam, and Y. H. Teoh. "Effect of Ethanol-Coconut Oil Methyl Ester on the Performance, Emission and CombustionCharacteristics of a High-Pressure Common-Rail DI Engine." In Applied Mechanics and Materials, vol. 663, pp. 19-25. 2014. (SCOPUS-CitedPublication)

M. Habibullah, H.H. Masjuki, M.A. Kalam, A.M. Ashraful, M.A. Habib, H.M. Mobarak, Effect of Bio- Lubricant on Tribological Characteristics of Steel,Procedia Engineering, 90 (2014) 740-745 (SCOPUS-Cited Publication)



S. Imtenan, H.H. Masjuki, M. Varman, M.I. Arbab, H. Sajjad, I.M.R. Fattah, M.J. Abedin, A.S.M. Hasib, Emission and Performance Improvement Analysisof Biodiesel-diesel Blends with Additives, Procedia Engineering, 90 (2014) 472-477 (SCOPUS-Cited Publication)


Rizwanul Fattah, I. M., H. H. Masjuki, M. A. Kalam, and B. M. Masum. "Effect of synthetic antioxidants on storage stability of Calophyllum inophyllum













2013

biodiesel." Materials Research Innovations 18, no. S6 (2014): S6-90. (ISI-Cited Publication)

H. Sajjad, H.H. Masjuki, M. Varman, M.A. Kalam, M.I. Arbab, S. Imtenan, M.M. Rashed, Comparative study of gas-to-liquid fuel, B5 diesel and theirblends with respect to fuel properties, engine performance and exhaust emissions, RSC Advances, 4 (2014) 44529-44536. (ISI-Cited Publication)


M.A. Wakil, M.A. Kalam, H.H. Masjuki, I.M. Rizwanul Fattah, B.M. Masum, Evaluation of rice bran, sesame and moringa oils as feasible sources ofbiodiesel and the effect of blending on their physicochemical properties, RSC Advances, 4 (2014) 56984-56991 (ISI-Cited Publication)


H. Sajjad, H.H. Masjuki, M. Varman, M.M.R. Khan, M.I. Arbab, S. Imtenan, A. Sanjid, Comparative Study of Biodiesel, GTL Fuel and Their Blends inContext of Engine Performance and Exhaust Emission, Procedia Engineering, 90 (2014) 466-471 (SCOPUS-Cited Publication)


Abdullah, Muhammad Ilman Hakimi Chua, Mohd Fadzli Bin Abdollah, Hilmi Amiruddin, Noreffendy Tamaldin, Nur Rashid Mat Nuri, Masjuki Hassan, andS. A. Rafeq. "Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles." In Applied Mechanics and Materials, vol. 607, pp. 70-73.2014. (SCOPUS-Cited Publication)

Abdullah, M. Adlan, Farid Nasir Ani, and Masjuki Hassan. "Performance and Emission of a Common Rail Passenger Car Engine Fuelled with Palm OilBiodiesel." In Applied Mechanics and Materials, vol. 564, pp. 66- 71. 2014. (SCOPUS-Cited Publication)

Zulkifli, N. W. M., M. A. Kalam, H. H. Masjuki, K. A. H. Al Mahmud, and R. Yunus. "The effect of palm oil trimethylolpropane ester on extreme pressurelubrication." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228, no. 2 (2014): 160-169. (ISI-CitedPublication)


Fazal, M. A., Haseeb, A. S. M. A. & Masjuki, H. H. 2013. Corrosion mechanism of copper in palm biodiesel, Corrosion Science 67 (2013) 50-59. (ISI-Cited Publication)

S. Liza , A. S. M. A. Haseeb , H. H. Masjuki & A. A Abbas (2013): The Wear Behavior of Cross-Linked UHMWPE under Dry and Bovine Calf SerumLubricated Conditions, Tribology Transactions, 56:1, 130-140 (ISI-Cited Publication)

Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Ong, H. C., Atabani, A. E., & Chong, W. T. (2013). A global comparative review of biodiesel productionfrom jatropha curcas using different homogeneous acid and alkaline catalysts: Study of physical and chemical properties. Renewable and SustainableEnergy Reviews, 24(0), 514-533. doi: http://dx.doi.org/10.1016/j.rser.2013.03.044 (ISI-Cited Publication)

Atabani, A. E., Mahlia, T. M. I., Anjum Badruddin, I., Masjuki, H. H., Chong, W. T., & Lee, K. T. (2013). Investigation of physical and chemical propertiesof potential edible and non-edible feedstocks for biodiesel production, a comparative analysis. Renewable and Sustainable Energy Reviews, 21(0), 749-755. doi: http://dx.doi.org/10.1016/j.rser.2013.01.027 (ISI-Cited Publication)

Shahabuddin, M., Masjuki, H. H., Kalam, M. A., Bhuiya, M. M. K., & Mehat, H. (2013). Comparative tribological investigation of bio-lubricant formulatedfrom a non-edible oil source (Jatropha oil). Industrial Crops and Products, 47, 323-330. (ISI-Cited Publication)


Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Ong, H. C., Chong, W. T., & Boosroh, M. H. (2013). Overview properties of biodiesel diesel blends fromedible and non-edible feedstock. Renewable and Sustainable Energy Reviews, 22(0), 346-360. doi: http://dx.doi.org/10.1016/j.rser.2013.01.055 (ISI-Cited Publication)

Hussan, M. J., Hassan, M. H., Kalam, M. A., & Memon, L. A. (2013). Tailoring key fuel properties of diesel biodiesel ethanol blends for diesel engine.Journal of Cleaner Production, 51(0), 118-125. doi: http://dx.doi.org/10.1016/j.jclepro.2013.01.023 (ISI-Cited Publication)

M.J. Abedin, H.H. Masjuki, M.A. Kalam, A. Sanjid, S.M. Ashrafur Rahman, B.M. Masum, 2013. Energy balance of internal combustion engines usingalternative fuels. Renewable and Sustainable Energy Reviews,26(0):20 33. http://dx.doi.org/10.1016/j.rser.2013.05.049 (ISI-Cited Publication)

Masum, B. M., Masjuki, H. H., Kalam, M. A., Rizwanul Fattah, I. M., Palash, S. M., & Abedin, M. J. (2013). Effect of ethanol gasoline blend on NOxemission in SI engine. Renewable and Sustainable Energy Reviews, 24(0), 209-222. doi: http://dx.doi.org/10.1016/j.rser.2013.03.046 (ISI-CitedPublication)

Ong, H. C., Silitonga, A. S., Masjuki, H. H., Mahlia, T. M. I., Chong, W. T., & Boosroh, M. H. (2013). Production and comparative fuel properties ofbiodiesel from non-edible oils: Jatropha curcas, Sterculia foetida and Ceiba pentandra. Energy Conversion and Management, 73(0), 245-255. doi:http://dx.doi.org/10.1016/j.enconman.2013.04.011 (ISI-Cited Publication)








B. Rismanchi, R. Saidur, H.H. Masjuki, T.M.I. Mahlia. 2013. Modelling and Simulation to Determine the Potential Energy Savings by Implementing ColdThermal Energy Storage System in Office Buildings. Energy conversion and management75:152-161 (ISI-Cited Publication)

Arbab, M. I., Masjuki, H. H., Varman, M., Kalam, M. A., Imtenan, S., & Sajjad, H. (2013). Fuel properties, engine performance and emissioncharacteristic of common biodiesels as a renewable and sustainable source of fuel. Renewable and Sustainable Energy Reviews, 22(0), 133-147. doi:http://dx.doi.org/10.1016/j.rser.2013.01.046 (ISI-Cited Publication)

Fazal, M. A., Haseeb, A. S. M. A., Masjuki, H. H. 2013. Investigation of Friction and Wear Characteristics of Palm Biodiesel, Energy Conversion andManagement 67 (2013) 251- 256 (ISI-Cited Publication)


Rizwanul Fattah, I.M., Masjuki, H.H., Liaquat, A.M., Ramli, R., Kalam, M.A. & Riazuddin, V.N. "Impact of various biodiesel fuels obtained from edible andnon-edible oils on engine exhaust gas and noise emissions", Renewable and Sustainable Energy Reviews, vol18, p.552-567, 2013. (ISI/SCOPUS CitedPublication)


Non-edible vegetable oils: A critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance andemissions production Renewable and Sustainable Energy Reviews, Volume 18, February 2013, Pages 211-245 A.E. Atabani, A.S. Silitonga, H.C. Ong,T.M.I. Mahlia, H.H. Masjuki, Irfan Anjum Badruddin, H. Fayaz (ISI/SCOPUS Cited Publication)

Chew, K. V., Haseeb, A. S. M. A., Masjuki, H. H., Fazal, M. A., & Gupta, M. Corrosion of magnesium and aluminum in palm biodiesel: A comparativeevaluation. Energy(0). doi: http://dx.doi.org/10.1016/j.energy.2013.04.067 (ISI-Cited Publication)


Rahman, S. M. A., Masjuki, H. H., Kalam, M. A., Abedin, M. J., Sanjid, A., & Sajjad, H. (2013). Impact of idling on fuel consumption and exhaustemissions and available idle-reduction technologies for diesel vehicles A review. Energy Conversion and Management, 74(0), 171-182. doi:http://dx.doi.org/10.1016/j.enconman.2013.05.019 (ISI-Cited Publication)


Mofijur, M., Atabani, A. E., Masjuki, H. H., Kalam, M. A., & Masum, B. M. (2013). A study on the effects of promising edible and non-edible biodieselfeedstocks on engine performance and emissions production: A comparative evaluation. Renewable and Sustainable Energy Reviews, 23(0), 391-404.doi: http://dx.doi.org/10.1016/j.rser.2013.03.009 (ISI-Cited Publication)


A. Sanjid, H.H. Masjuki, M.A. Kalam, S.M.A. Rahman, M.J. Abedin, S.M. Palash, Impact of palm, mustard, waste cooking oil and Calophylluminophyllum biofuels on performance and emission of CI engine, Renewable and Sustainable Energy Reviews, 27 (2013) 664-682. (ISI-Cited Publication)


A.S. Silitonga, H.H. Masjuki, T.M.I. Mahlia, H.C. Ong, W.T. Chong, Experimental study on performance and exhaust emissions of a diesel engine fuelledwith Ceiba pentandra biodiesel blends, Energy Conversion and Management, 76 (2013) 828-836. (ISI-Cited Publication)


Silitonga, A. S., Ong, H. C., Mahlia, T. M. I., Masjuki, H. H. and Chong, W. T. 2013.Characterization and production of Ceiba pentandra biodiesel and itsblends. Fuel, 108, 855-858. (ISI-Cited Publication)


Shafie, S. M., Mahlia, T. M. I. and Masjuki, H. H. 2013. Life cycle assessment of rice straw co-firing with coal power generation in Malaysia. Energy, 57,1 August 2013: 284-294. (ISI-Cited Publication)


Hassan, M. H. and Kalam, M. A. 2013. An Overview of Biofuel as a Renewable Energy Source: Development and Challenges. Procedia Engineering 56,39-53. (ISI/SCOPUS Cited Publication)


Imran, A., Varman, M., Masjuki, H. H. and Kalam, M. A. 2013. Review on alcohol fumigation on diesel engine: A viable alternative dual fuel technologyfor satisfactory engine performance and reduction of environment concerning emission. Renewable and Sustainable Energy Reviews, 26, October 2013:739-751. (ISI-Cited Publication)


Atabani, A. E., Mahlia, T. M. I., Masjuki, H. H., Badruddin, I. A., Yussof, H. W., Chong, W. T. and Lee, K. T. A comparative evaluation of physical andchemical properties of biodiesel synthesized from edible and non-edible oils and study on the effect of biodiesel blending. Energy. (ISI-Cited Publication)


Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Fattah, I. M. R., Hazrat, M. A., Varman, M., Mofijur, M. and Shahabuddin, M. 2013. Effect of Coconut















Biodiesel Blended Fuels on Engine Performance and Emission Characteristics. Procedia Engineering, 56(2013), 583-590. (ISI/SCOPUS CitedPublication)


Silitonga, A. S., Ong, H. C., Masjuki, H. H., Mahlia, T. M. I., Chong, W. T., & Yusaf, T. F. Production of biodiesel from Sterculia foetida and its processoptimization. Fuel(0). doi: http://dx.doi.org/10.1016/j.fuel.2013.03.051 (ISI-Cited Publication)

Liaquat, A. M., Masjuki, H. H., Kalam, M. A., Fazal, M. A., Khan, A. F., Fayaz, H. and Varman, M. 2013. Impact of palm biodiesel blend on injectordeposit formation. Applied Energy, 111, November 2013: 882-893 (ISI-Cited Publication)


H.H. Masjuki, M.A. Kalam, M. Mofijur, M. Shahabuddin, Biofuel: Policy, Standardization and Recommendation for Sustainable Future Energy Supply,Energy Procedia, 42 (2013) 577-586. (ISI/SCOPUS Cited Publication)


M Palash, S., Kalam, M. A., Masjuki, H. H., Masum, B. M., Rizwanul Fattah, I. M., & Mofijur, M. (2013). Impacts of biodiesel combustion on NOxemissions and their reduction approaches. Renewable and Sustainable Energy Reviews, 23(0), 473-490. doi:http://dx.doi.org/10.1016/j.rser.2013.03.003 (ISI-Cited Publication)


M. Mofijur, H.H. Masjuki, M.A. Kalam, A.E. Atabani, M. Shahabuddin, S.M. Palash, M.A. Hazrat, Effect of biodiesel from various feedstocks oncombustion characteristics, engine durability and materials compatibility: A review, Renewable and Sustainable Energy Reviews, 28 (2013) 441-455. (ISI-Cited Publication)


S.M.A. Rahman, H.H. Masjuki, M.A. Kalam, M.J. Abedin, A. Sanjid, H. Sajjad, Production of palm and Calophyllum inophyllum based biodiesel andinvestigation of blend performance and exhaust emission in an unmodified diesel engine at high idling conditions, Energy Conversion and Management,76 (2013) 362-367. (ISI-Cited Publication)


Zulkifli NWM, Kalam MA, Masjuki HH, Shahabuddin M, Yunus R. Wear prevention characteristics of a palm oil-based TMP (trimethylolpropane) ester asan engine lubricant. Energy. 2013, vol54, p.167-173. (ISI-Cited Publication)


S.C. Pang, H.H. Masjuki, M.A. Kalam, M.A. Hazrat, Liquid absorption and solid adsorption system for household, industrial and automobile applications:A review, Renewable and Sustainable Energy Reviews, 28 (2013) 836-847. (ISI-Cited Publication)


S.M. Palash, H.H. Masjuki, M.A. Kalam, B.M. Masum, A. Sanjid, M.J. Abedin, State of the art of NOx mitigation technologies and their effect on theperformance and emission characteristics of biodiesel-fueled Compression Ignition engines, Energy Conversion and Management, 76 (2013) 400-420. (ISI-Cited Publication)


Shahabuddin, M.,Liaquat,A.M.,Masjuki,H.H.,Kalam, M.A, Mofijur,M.,2013.Ignition delay, combustion and emission characteristics of diesel engine fueledwith biodiesel. Renewable and Sustainable Energy Reviews, 21:623-632 (ISI-Cited Publication)


Shahabuddin, M., Masjuki, H. H. and Kalam, M. A. (2013) 'Experimental Investigation into Tribological Characteristics of Bio-Lubricant Formulated fromJatropha Oil', Procedia Engineering, 56(0), 597-606. (ISI/SCOPUS Cited Publication)


Mofijur, M., Masjuki, H. H., Kalam, M. A., & Atabani, A. E. Evaluation of biodiesel blending, engine performance and emissions characteristics ofJatropha curcas methyl ester: Malaysian perspective. Energy(0)(In Press, Corrected Proof). doi: http://dx.doi.org/10.1016/j.energy.2013.02.059 (ISI-Cited Publication)


Imran, A., Masjuki, H. H., Kalam, M. A., Varman, M., Hasmelidin, M., Mahmud, K. A. H. A., . . . Habibullah, M. (2013). Study of Friction and WearCharacteristic of Jatropha Oil Blended Lube Oil. Procedia Engineering, 68(0), 178-185. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.165 (SCOPUS-Cited Publication)


Al Mahmud, K. A. H., Zulkifli, N. W. M., Masjuki, H. H., Varman, M., Kalam, M. A., Mobarak, H. M., . . . Shahir, S. A. (2013). Working Temperature Effectof A- C: H/A-C: H and Steel/Steel Contacts on Tribo Properties in Presence of Sunflower Oil as a Bio Lubricant. Procedia Engineering, 68(0), 550-557.doi: http://dx.doi.org/10.1016/j.proeng.2013.12.220 (SCOPUS-Cited Publication)


















2012

Asrul, M., Zulkifli, N. W. M., Masjuki, H. H., & Kalam, M. A. (2013). Tribological Properties and Lubricant Mechanism of Nanoparticle in Engine Oil.Procedia Engineering, 68(0), 320-325. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.186 (SCOPUS-Cited Publication)


Alam, T., Mahmud, K. H. A. A., Hasan, M. F., Shahir, S. A., Masjuki, H. H., Kalam, M. A., . . . Mobarak, H. M. (2013). Effect of Magnesia on Zinc OxideStabilized Nano Alumina Ceramic Powder in Sintering Process and its Impact on Mechanical Properties. Procedia Engineering, 68(0), 723-729. doi:http://dx.doi.org/10.1016/j.proeng.2013.12.245 (SCOPUS-Cited Publication)


Zulkifli, N. W. M., Kalam, M. A., Masjuki, H. H., & Yunus, R. (2013). Experimental Analysis of Tribological Properties of Biolubricant with NanoparticleAdditive. Procedia Engineering, 68(0), 152-157. doi: http://dx.doi.org/10.1016/j.proeng.2013.12.161 (SCOPUS-Cited Publication)


Fazal, M. A., Haseeb, A. S. M. A. & Masjuki. H. H. 2012. Degradation of automotive materials in palm biodiesel. Energy 40:76-83. (ISI-Cited Publication)

H.C. Ong, T.M.I. Mahlia, H.H. Masjuki,(2012),A review on energy pattern and policy for transportation sector in Malaysia, Renewable and SustainableEnergy Reviews, Volume 16, Issue 1,Pages 532-542 (ISI-Cited Publication)


M.M.K. Bhuiya, J.U. Ahamed, M.S.U. Chowdhury, M.A.R. Sarkar, B. Salam, R. Saidur, H.H. Masjuki, M.A. Kalam,(2012), Heat transfer enhancementand development of correlation for turbulent flow through a tube with triple helical tape inserts.International Communications in Heat and Mass Transfer,Volume 39, Issue 1,Pages 94-101 (ISI-Cited Publication)


Haque A.; Lim B. H.; Haseeb A. S. M. A.; Masjuki,H. H.,(2012), Die attach properties of Zn-Al-Mg-Ga based high-temperature lead-free solder on Culead-frame. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS Volume: 23, Issue:1, Pages:115-123. (ISI-Cited Publication)


J.U. Ahamed, R Saidur, H. H. Masjuki and M.A. Sattar, Energy and thermodynamic performance of LPG as an alternative refrigerant to R-134a in adomestic refrigerator, Energy Education Science and Technology Part A: Energy Science and Research, 2012, 29(1): 597- 610. (ISI-Cited, Q1, IF =9.33). (ISI-Cited Publication)

RISMANCHI, B., SAIDUR, R., MASJUKI, H. H. & MAHLIA, T. M. I. 2012. Thermodynamic evaluation of utilizing different ice thermal energy storagesystems for cooling application in office buildings in Malaysia. Energy and Buildings, 53:117-126. (ISI-Cited Publication)


H.G. How, Y.H. Teoh, H.H. Masjuki, M.A. Kalam,2012. Impact of coconut oil blends on particulate-phase PAHs and regulated emissions from a light dutydiesel engine, Energy, 48(1):500-509, ISSN 0360-5442,http://dx.doi.org/10.1016/j.energy.2012.10.009 (ISI-Cited Publication)


J.U. Ahamed, N.A. Madlool, R. Saidur, M.I. Shahinuddin, A. Kamyar, H.H. Masjuki,2012. Assessment of energy and exergy efficiencies of a grate clinkercooling system through the optimization of its operational parameters, Energy, 46(1):664-674, ISSN 0360-5442, 10.1016/j.energy.2012.06.074. (ISI-Cited Publication)


Liaquat, A.M., Masjuki, H.H., Kalam, M.A., Varman, M., Hazrat, M.A., 2012. Experimental analysis on engine performance and emission characteristicsusing biodiesel obtained from non-edible oil. International Review of Mechanical Engineering 6(3): 659-665. (SCOPUS-Cited Publication)


Adnan, R., Masjuki, H.H.& Mahlia, T.M.I.2012. Performance and emission analysis of hydrogen fueled compression ignition engine with variable waterinjection timing.ENERGY 43 (1) Pages: 416-426 (ISI-Cited Publication)


Atabani, A.E., Silitonga, A.S., Badruddin, I.A., Mahlia, T.M.I., Masjuki, H.H., Mekhilef, S.2012. A comprehensive review on biodiesel as an alternativeenergy resource and its characteristics. Renewable and Sustainable Energy Reviews. Volume 16, Issue 4,Pages 2070-2093 (ISI-Cited Publication)


Kalam, M.A., Ahamed, J.U., Masjuki, H.H.2012. Land availability of Jatropha production in Malaysia.Renewable and Sustainable Energy ReviewsVolume 16, Issue 6, Pages 3999-4007 (ISI-Cited Publication)

















Rismanchi, B., Saidur, R., Masjuki, H.H., Mahlia, T.M.I.2012.Energetic, economic and environmental benefits of utilizing the ice thermal storage systemsfor office building applications. Energy and Buildings. 50 (2012) 347 354. (ISI/SCOPUS Cited Publication)


Ong, H.C., Mahlia, T.M.I., Masjuki, H.H., Honnery, D. 2012.Life cycle cost and sensitivity analysis of palm biodiesel production. Fuel 98 , pp. 131-139 (ISI-Cited Publication)


Mofijur, M., Masjuki, H.H., Kalam, M.A., Shahabuddin, M., Hazrat, M.A., Liaquat, A.M. 2012. Palm oil methyl ester and its emulsions effect on lubricantperformance and engine components wear. Energy Procedia 14 , pp. 1748-1753 (ISI-Cited Publication)


Shahabuddin, M., Masjuki, H.H., Kalam, M.A., Mofijur, M., Hazrat, M.A., Liaquat, A.M. 2012. Effect of additive on performance of C.I. engine fuelled withbio diesel. Energy Procedia 14 , pp. 1624-1629 (ISI-Cited Publication)


Bushroa, A.R., Rahbari, R.G., Masjuki, H.H., Muhamad, M.R.2012. Approximation of crystallite size and microstrain via XRD line broadening analysis inTiSiN thin films. Vacuum. Volume 86, Issue 8, Pages 1107 1112 (ISI-Cited Publication)


Hasan, M. M., Haseeb, A. S. M. A., Masjuki, H. H. 2012. Structural and mechanical properties of nanostructured tungsten oxide thin films. SurfaceEngineering, 28(10):778-785. (ISI-Cited Publication)


Shafie, S.M., Mahlia, T.M.I., Masjuki, H.H., Ahmad-Yazid, A.(2012)A review on electricity generation based on biomass residue in Malaysia. Renewableand Sustainable Energy Reviews 16 (8) , pp. 5879-5889 (ISI-Cited Publication)


M. Mofijur, H.H.Masjuki, M.A.Kalam, M.A.Hazrat, A.M.Liaquat, M.Shahabuddin, M.Varman. 2012. Prospects of biodiesel from Jatropha in Malaysia.Renewable and Sustainable Energy Reviews 16(2012)5007 5020 (ISI-Cited Publication)

Bhuiya, MMK; Chowdhury, MSU ; Ahamed, JU; Khan, MJH; Sarkar, MAR ; Kalam, MA; Masjuki, HH ; Shahabuddin, M (2012) Heat transfer performancefor turbulent flow through a tube using double helical tape inserts. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER 39(6):818-825 (ISI-Cited Publication)


Pang S.C., Masjuki H.H., Kalam M.A., Hazrat,M.A. 2012. A Review on Air Flow and Coolant Flow Circuit in Vehicles Cooling System, Int. J. Heat & MassTrans., 55(24): 6295 6306. (ISI-Cited Publication)


Md. Hazrat Ali, H. H. Masjuki, M. A. Kalam, Pang S. C., A.M. Liaquat, Irfan Magami, 2012. Determination of Time Variant 1D-3D Temperature and HeatTransfer Distribution Inside The Cooling Jacket of A SI Engine Cooling System After Key-Off, SAE Technical Paper 2012-01-0642, 2012,doi:10.4271/2012-01-0642. (Non-ISI/Non-SCOPUS Cited Publication)


M. Shahabuddin, M.A. Kalam, H. H. Masjuki, M. Mofijur. Tribological characteristics of amine phosphate and octylated/butylated diphenylamine additivesinfused bio-lubricant . Energy education science and technology Part A: Energy Science and Research 2012, 30(1): 89-102 (ISI-Cited Publication)


Kovoor,P. P.,Idris,M. R., Masjuki, H. H.,Yahya, T. F. T., 2012. A study conducted on the impact of effluent waste from machining process on theenvironment by water analysis. International Journal of Energy and Environmental Engineering,3:21 (Non-ISI/Non-SCOPUS Cited Publication)


M. M. K. Bhuiya, J. U. Ahamed, M. A. R.. Sarkar, B. Salam, R. Saidur, A. S. M. Sayem, M. A. Kalam, Heat transfer and pressure drop characteristics inturbulent flow through a tube, Experimental Heat Transfer, Vol. 25, issue 4, pp. 301-322. (ISI/SCOPUS Cited Publication)

M.A. Hazrat, H.H. Masjuki, M.A. Kalam, I.A. Badruddin, Rahizar Ramli & S.C. Pang, 2012. Steady state analysis of coolant temperature distribution in aspark ignition engine cooling jacket , International Journal of Mechanical and Materials Engineering (IJMME), (ISSN 1823-0334), Vol.7(3:243-250 (SCOPUS-Cited Publication)


AHAMED, J. U., SAIDUR, R., MASJUKI, H. H. & SATTAR, M. A. 2012. AN ANALYSIS OF ENERGY, EXERGY, AND SUSTAINABLE DEVELOPMENTOF A VAPOR COMPRESSION REFRIGERATION SYSTEM USING HYDROCARBON. International Journal of Green Energy, 9(7):702-717. (ISI-CitedPublication)
















2011

SHAHABUDDIN, M., KALAM, M. A., MASJUKI, H. H., BHUIYA, M. M. K. & MOFIJUR, M. 2012. An experimental investigation into biodiesel stability bymeans of oxidation and property determination. Energy, 44, 616- 622. (ISI-Cited Publication)


Liaquat, A.M., Masjuki, H.H., Kalam, M.A., Varman, M., Hazrat, M.A., Shahabuddin, M., Mofijur, M. 2012. Application of blend fuels in a diesel engine.Energy Procedia Volume 14, 2012, Pages 1124-1133. (SCOPUS-Cited Publication)

W.B.W. Nik, A.F. Ayob, S. Syahrullail, H.H. Masjuki, & M.F. Ahmad, 2012. THE EFFECT OF BORON FRICTION MODIFIER ON THE PERFORMANCEOF BRAKE PADS. International Journal of Mechanical and Materials Engineering (ISSN 1823-0334),7(1): 31-35. (SCOPUS-Cited Publication)


Pang,S.C., Kalam,M.A.,Masjuki, H.H.,Badruddin, I.A. & Hazrat,M.A. 2012. Design Improvements of Engine Cooling System Using CFD And 1D Thermo-Fluid Model: Medium Driving Speed and Keyed-Off Conditions.Engineering e-Transaction (ISSN 1823-6379), 7(2):127-134. (Non-ISI/Non-SCOPUSCited Publication)


S.C. Pang, M.A. Kalam, H.H. Masjuki, I.A. Badruddin, Rahizar Ramli, M.A. Hazrat, 2012. Underhood Geometry Modification and Transient CoolantTemperature Modelling for Robust Cooling Networks , International Journal of Mechanical and Materials Engineering (IJMME), (ISSN 1823-0334),Vol.7(3):251-258. (SCOPUS-Cited Publication)


FAZAL, M. A., HASEEB, A. S. M. A. & MASJUKI, H. H. (2011) Effect of different corrosion inhibitors on the corrosion of cast iron in palm biodiesel. FuelProcessing Technology, 92(11), 2154-2159. (ISI-Cited Publication)

TAJALLY, M., HUDA, Z. & MASJUKI, H. H. 2011. Effect of deformation and recrystallization conditions on tensile behavior of aluminum alloy 7075. MetalScience and Heat Treatment, 53, 165-168. (ISI-Cited Publication)

Kalam, M. A. & Masjuki, H. H. 2011. Design, modifiaction and test of a new catalytic converter for natural gas fueled engines. Arabian journal for scienceand engineering, 5(36): 677-688. (ISI-Cited Publication)

Ahamed, J. U., Saidur, R., Masjuki, H. H., Mekhilef, S., Ali, M. B., & Furqon, M. H. 2011. An application of energy and exergy analysis in agriculturalsector of Malaysia. Energy Policy, 39(12): 7922-7929. (ISI-Cited Publication)

Silitonga, A. S., Atabani, A. E., Mahlia, T. M. I., Masjuki, H. H., Badruddin, I. A., & Mekhilef, S. 2011. A review on prospect of Jatropha curcas forbiodiesel in Indonesia. Renewable and Sustainable Energy Reviews, 15(8): 3733-3756. (ISI-Cited Publication)

Shafie, S. M., Mahlia, T. M. I., Masjuki, H. H., & Andriyana, A. 2011. Current energy usage and sustainable energy in Malaysia: A review. Renewableand Sustainable Energy Reviews, 15(9): 4370-4377. (Q1) (ISI-Cited Publication)

Ahamed J. U., Saidur R. & Masjuki H. H. 2011. A review on exergy analysis of vapor compression refrigeration system, Renewable and SustainableEnergy Reviews, 3(15): 1593-1600. (ISI-Cited Publication)

Bushroa, A.R., H.H. Masjuki, M.R. Muhamad, and B.D. Beake,2011. Optimized scratch adhesion for TiSiN coatings deposited by a combination of DCand RF sputtering. Surface & Coatings Technology, 206(7):1837- 1844. (ISI-Cited Publication)

N.W.M. Zulkifli, M.A.Kalam, R. Yunus, H.H. Masjuki,2011. ANTI-WEAR CHARACTERISTICS OF JATROPHA TRIMETHYLOLPROPANE (TMP)ESTER.Engineering e-Transaction (ISSN 1823-6379) Volume 6(2) (Non-ISI/Non-SCOPUS Cited Publication)

A.R. Bushroa, H.H. Masjuki, M.R. Muhamad,2011. PARAMETER OPTIMIZATION OF SPUTTERED Ti INTERLAYER USING TAGUCHI METHOD,International Journal of Mechanical and Materials Engineering (ISSN 1823-0334),Volume 6(2). (SCOPUS-Cited Publication)

M.A. Kalam, H.H. Masjuki, M. Varman, A.M. Liaquat,2011. FRICTION AND WEAR CHARACTERISTICS OF WASTE VEGETABLE OILCONTAMINATED LUBRICANTS, International Journal of Mechanical and Materials Engineering (ISSN 1823-0334) Volume 6(3). (SCOPUS-CitedPublication)

Fazal, M. A., Haseeb, A. S. M. A. & Masjuki, H. H. 2011. Biodiesel feasibility study: An evaluation of material compatibility; performance; emission andengine durability. Renewable and Sustainable Energy Reviews, 15, 1314-1324. (ISI-Cited Publication)

Ong, H. C., Mahlia, T. M. I., & Masjuki, H. H. (2011). A review on energy scenario and sustainable energy in Malaysia. Renewable and SustainableEnergy Reviews, 15(1), 639-647. (ISI-Cited Publication)







2010

Jayed, M. H., Masjuki, H. H., Kalam, M. A., Mahlia, T. M. I., Husnawan, M., & Liaquat, A. M. (2011). Prospects of dedicated biodiesel engine vehicles inMalaysia and Indonesia. Renewable and Sustainable Energy Reviews, 15(1), pp. 220-235. (ISI-Cited Publication)

Hasanuzzaman M., Saidur R. & Masjuki, H. H., (2011), Effects of different variables on moisture transfer of household refrigerator-freezer, EnergyEducation Science and Technology Part A: Energy Science and Research, 27(2): pp. 401-418. (ISI-Cited Publication)

Kalam, M. A., Masjuki, H. H., Jayed, M. H. & Liaquat, A. M. 2011. Emission and performance characteristics of an indirect ignition diesel engine fuelledwith waste cooking oil. Energy, 36, 397-402 (ISI Q1). (ISI-Cited Publication)

Ong, H.C., T.M.I. Mahlia, H.H. Masjuki, and R.S. Norhasyima, Comparison of palm oil, Jatropha curcas and Calophyllum inophyllum for biodiesel: Areview. Renewable and Sustainable Energy Reviews, 2011. 15(8): p. 3501-3515. (ISI-Cited Publication)

Ong, H.C., T.M.I. Mahlia, and H.H. Masjuki, A review on emissions and mitigation strategies for road transport in Malaysia. Renewable and SustainableEnergy Reviews, 2011. 15(8): p. 3516-3522. (ISI-Cited Publication)

Adnan, R., Masjuki, H. H. & Mahlia, T. M. I. 2011. Mathematical modeling on the effect of equivalence ratio in emission characteristics of compressionignition engine with hydrogen substitution. Applied Mathematics and Computation, 217(13), 6144-6158. (ISI-Cited Publication)

Haseeb, A. S. M. A., Jun, T. S., Fazal, M. A. & Masjuki, H. H. 2011. Degradation of physical properties of different elastomers upon exposure to palmbiodiesel. Energy, 36(3), 1814-1819. (ISI-Cited Publication)

Fazal, M.A., A.S.M.A. Haseeb, and H.H. Masjuki, Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel. Energy,2011. 36(5): p. 3328-3334. (ISI-Cited Publication)

Kalam, M.A. and H.H. Masjuki, An experimental investigation of high performance natural gas engine with direct injection. Energy, 2011. 36(5): p. 3563-3571. (ISI-Cited Publication)

S. Liza, A.S.M.A. Haseeb, A.A. Abbas, H.H. Masjuki. 2011. Failure analysis of retrieved UHMWPE tibial insert in total knee replacement. EngineeringFailure Analysis; 18:1415-1423 (ISI-Cited Publication)

HUSNAWAN, M., MASJUKI, H. H. & MAHLIA, T. M. I. 2011. The interest of combining two additives with palm olein as selected lubricant components.Industrial Lubrication and Tribology, 63(3), 203-209. (ISI-Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, H.H. Masjuki, (2011) Intermixing of metal oxide/Ag/metal oxide nanoscale multilayers prepared by RF reactivemagnetron sputtering, Surface Engineering (Maney Publishing), Vol. 27(5), pp. 382-388. (ISI-Cited Publication)

AHMED, A. S., HAMDAN, S., MASJUKI, H. H. & MAKINO, K. 2010. Efficient Conversion of Xylose and Glucose as Solid Biomass to Bioethanol byRecombinant Yeast. The Journal of the Institute of Engineers, Malaysia, 72, 36-43. (Non-ISI/Non-SCOPUS Cited Publication)

Haseeb, A., Fazal, M. A., Jahirul, M. I. & Masjuki, H. H. 2011. Compatibility of automotive materials in biodiesel: A review. Fuel 90(3): 922-931. (ISI-CitedPublication)

Mahlia, T. M. I., Saidur, R., Yanti, P. a. A. & Masjuki, H. H., 2011. Role of energy guide labels in consumers purchase decision for household electricalappliances. Energy Education Science and Technology Part a-Energy Science and Research, 27(1), 95-104. (ISI-Cited Publication)

A.S. Ahmed, S. Khan, S. Hamdan, R. Rahman, A. Kalam, H.H. Masjuki, T.M.I. Mahlia, 2010. Biodiesel Production from Macro Algae as a Green Fuel forDiesel Engine. Journal of Energy & Environment (Non-ISI/Non-SCOPUS Cited Publication)


M.M. Hasan, A.S.M.A. Haseeb, R. Saidur ,H.H. Masjuki & M. Hamdi. 2010. Influence of Substrate and Annealing Temperatures on Optical Properties ofRF-sputtered TiO2 Thin Films. Optical Materials 32(6):690-695. (ISI/SCOPUS Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki & M. Hamdi. 2010. Influence of Substrate and Annealing Temperature on Optical properties ofRF-sputtered TiO2. Optical Materials 32(6):690-695. DOI:10.1016/j.optmat.2009.07.011. (ISI-Cited Publication)

Tajally, M., Huda, Z. & Masjuki, H. H. (2010). A comparative analysis of tensile and impact-toughness behavior of cold-worked and annealed 7075aluminum alloy. International Journal of Impact Engineering, 37(4):425-432. (ISI/SCOPUS Cited Publication)

T. M. I. Mahlia, C. G. Hor, H. H. Masjuki, M. Husnawan, M. Varman and S. Mekhilef.(2010). CLOTHES DRYING FROM ROOM AIR CONDITIONINGWASTE HEAT: THERMODYNAMICS INVESTIGATION, The Arabian Journal for Science and Engineering, 35(1B):339-351. (ISI-Cited Publication)




2009

Haseeb, A.S.M.A, Masjuki, H. H., Ann, L. J. & Fazal, M. A. (2010). Corrosion characteristics of copper and leaded bronze in palm biodiesel. FuelProcessing Technology, 91(3):329-334. (ISI/SCOPUS Cited Publication)

R. Saidur n, J.U. Ahamed, H.H. Masjuki.(2010).Energy, exergy and economic analysis of industrial boilers, Energy Policy, 38(5):2188-2197. (ISI/SCOPUS Cited Publication)

A. S. M. A. Haseeb, S. Y. Sia, M. A. Fazal, H. H. Masjuki, Effect of Temperature on Tribological Properties of Palm Biodiesel, Energy, 2010. vol.35(3):1460-1464 (ISI-Cited Publication)

J. U. Ahamed, M. M. K. Bhuiya, R. Saidur, H. H. Masjuki, M. A. R. Sarkar, A. S. M. Sayem and M. Islam (2010), Forced convection heat transferperformance of porous twisted tape insert, Engineering e-Transaction, Vol. 5, No. 2, pp 67-79. (Non-ISI/Non-SCOPUS Cited Publication)

R. Adnan, H.H. Masjuki and T.M.I. Mahlia(2010), EXPERIMENTAL INVESTIGATION ON IN-CYLINDER PRESSURE AND EMISSIONS OF DIESELENGINE WITH PORT INJECTION HYDROGEN SYSTEM, International Journal of Mechanical and Materials Engineering (IJMME), Vol.5, No.2, 136-141. (SCOPUS-Cited Publication)

R. Adnan, H.H. Masjuki and T.M.I. Mahlia (2010), Computational Simulation On Emissions Of Hydrogen Fueled Compression Ignition Engine WithVariable Combustion Temperature, International Journal of Mechanical and Materials Engineering (IJMME), Vol.5 No.2, 251-259. (SCOPUS-CitedPublication)

J. U. Ahamed, R. Saidur, H. H. Masjuki (2010), Thermodynamic Performance Analysis Of R-600 And R-600a as Refrigerant, Engineering e-Transaction(ISSN 1823-6379) Vol. 5, No. 1, , pp 11-18. (Non-ISI/Non-SCOPUS Cited Publication)

A.S.M.A. Haseeb, M.M. Hasan, H.H. Masjuki, (2010). Structural and mechanical properties of nanostructured TiO2 thin films deposited by RF sputtering;Surface and Coatings Technology, 205(2), pp. 338-344. (ISI-Cited Publication)

Fazal, M. A., Haseeb, A. S. M. A., & Masjuki, H. H. (2010). Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotivematerials. Fuel Processing Technology, 91(10), pp.1308-1315 (ISI-Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur, H.H. Masjuki (2010), Adhision and wear behavior of non-structured titanium oxide thin flims, InternationalJournal of Mechanical and Materials Engineering(IJMME), 5(1), pp. 5-10. (SCOPUS-Cited Publication)

Jahirul, M. I., Masjuki, H. H., Saidur, R., Kalam, M. A., Jayed, M. H. & Wazed, M. A.(2010) Comparative engine performance and emission analysis ofCNG and gasoline in a retrofitted car engine. Applied Thermal Engineering, 30(14-15), 2219-2226. (ISI-Cited Publication)

Aizura, A. B., Mahlia, T. M. I. & Masjuki, H. H. 2010.Potential fuel savings and emissions reduction from fuel economy standards implementation formotor-vehicles. Clean Technologies and Environmental Policy, 12: 255-263. (ISI/SCOPUS Cited Publication)

Haseeb, A.S.M.A, Masjuki, H. H., Siang, C. T. & Fazal, M. A. 2010. Compatibility of elastomers in palm biodiesel. Renewable Energy, 35(10):2356-2361. (ISI/SCOPUS Cited Publication)

Mahlia, T. M. I., Saidur, R., Husnawan, M., Masjuki, H. H. & Kalam, M. A. (2010). An approach to estimate the life-cycle cost of energy efficiencyimprovement of room air conditioners. Energy Education Science and Technology Part a-Energy Science and Research, 26(1):1-11. (ISI/SCOPUS CitedPublication)

Memon, L. A., Kalam, M. A., Masjuki, H. H. & Jayed, M. H.2010. Potential Emissions Reduction in Road Transport Sector Using Biofuel in DevelopingCountries. Atmospheric Environment, 44, 3869-3877. (ISI/SCOPUS Cited Publication)

Jahirul M. I, Saidur R. and Masjuki H. H. Predictability of artificial neural network (ANN) in performance prediction of a retrofitted CNG engine,International Journal of Mechanical and Materials Engineering (IJMME), Vol. 5 (2010), No. 2, pp. 268-275. (SCOPUS-Cited Publication)

Saidur R, Rahim N.A, Masjuki H.H, Mekhilef S, Ping H.W. and Jamaluddin M.F, End use energy analysis in Malaysia industrial sector, Energy, Volume34, Issue 2, February 2009, Pages 153-158 (ISI/SCOPUS Cited Publication)

M. Hasanuzzaman, R. Saidur and H. H. Masjuki, Effects of operating variables on heat transfer and energy consumption of household refrigerator-freezer during the closed door operation, Energy, Volume 34, Issue 2, February 2009, Pages 196-198 (ISI/SCOPUS Cited Publication)

M. Husnawan, H.H. Masjuki, T.M.I. Mahlia, M.G. Saifullah, M.A. Kalam, The use of dihydroxy fatty acid and palm-based polyol as selected componensof envo-diesel fuel blends to reduce C.I engine gaseous emissions and carbon deposits, SAE Paper: 2009-211- 0284 (Non-ISI/Non-SCOPUS CitedPublication)

M. Husnawan, H.H. Masjuki, T.M.I. Mahlia, M.G. Saifullah. Thermal analysis of cyclinder head carbon deposits from single cylinder diesel engine fueled



2008

by palm oil-diesel fuel emulsions,Oct. 2009, J. of Applied Energy, Elsevier,Vol: 86,Issue:10,pp: 2107-2113. (ISI/SCOPUS Cited Publication)

Jahirul MI, Saidur R, Masjuki HH, Kalam MA and Rashid MM. Application of artificial neural networks (ANN) for prediction the performance of a dual fuelinternal combustion engine. HKIE Transactions. vol 16 No 1, March 2009 (SCOPUS-Cited Publication)

A.B. Aizura, T.M.I. Mahlia, H.H. Masjuki. Potential fuel savings and emissions reduction from fuel economy standards implementation for motor vehicle,Clean Technologies and Environmental Policy, Springer, 2009, pp.1-9. (SCOPUS-Cited Publication)

M.A. Kalam, H.H. Masjuki, T.M.I. Mahlia, A. Ishak and M. Khair, A. Shahrir and A.Yusof, Experimental test of a new compressed natural gas directinjection engine, Journal of Energy and Fuel, ACS, USA, 2009 (ISI-Cited Publication)

M. Husnawan, H.H. Masjuki, T.M.I. Mahlia, S. Mekhilef, M.G. Saifullah, Interest of Using Metal-Based Additive and Oxygenated Additive Combination asa Biodiesel- Diesel Blends Post-flame Additive, 2009, JSIR-NISCAIR

M.H. Jayed, H.H. Masjuki, R. Saidur, M. A. Kalam & Jahirul, M. I. (2009) ENVIRONMENTAL ASPECTS AND CHALLENGES OF OILSEED PRODUCEDBIODIESEL IN SOUTHEAST ASIA. Renewable and Sustainable Energy Reviews,13 (9),pp.2452-2462. (ISI/SCOPUS Cited Publication)

M.A. Kalam, H.H. Masjuki, M. Redzuan, T. I. Mahlia, M. A.Fuad, M. Mohibah, K.H. Halim, A.Ishak,M.Khair, A.Shahrir and A.Yusoff, Development andTest of a New Catalytic Converter for Natural Gas Fueled Engine, Int. Journal Sadhana, Indian Academy of Sciences, vol. 34, Part 3, June 2009, pp.1-15. (ISI/SCOPUS Cited Publication)

M.M. Hasan, A.S.M.A. Haseeb, R. Saidur , H.H. Masjuki,M. Hamdi, (2009) Synthesis and Annealing of Nanostructured TiO2 Films by Radio-frequencyMagnetron Sputtering, Journal of Applied Sciences, vol. 9, Issue 15, pp. 2815-2821, ISSN 1812-5654. (SCOPUS-Cited Publication)

Saidur R, Sattar M.A, Masjuki H.H and Jamaluddin M.Y. Greenhouse gas emissions from refrigeration equipment in Malaysia. Energy & Environment,vol. 20, No. 4, 2009, pp 533-551. (SCOPUS-Cited Publication)

Saidur R, Rahim N.A, Ping H.W., M.I. Jahirul, Mekhilef S and Masjuki H.H., Energy and emission analysis for industrial motors in Malaysia, (2009)Energy Policy,37 (9),pp.3650-3658. (ISI/SCOPUS Cited Publication)

Saidur R, Hasanuzzaman. M, Hasan M.M. and Masjuki H.H, (2009) Overall Thermal Transfer Value of Residential Buildings in Malaysia, Journal ofApplied Sciences, vol. 9, Issue 11, pp. 2130-2136,ISSN1812-5654. (SCOPUS-Cited Publication)

A. G. Jaharah, I. A. Choudhury,H.H. Masjuki and C. H. Che Hassan, Surface Integrity Of AISI H13 Tool Steel In End Milling Process, InternationalJournal of Mechanical and Materials Engineering, 2009, vol. 4, no.1, pp. 88 -92. (SCOPUS-Cited Publication)

Hasan, M.M., Haseeb, A.S.M.A., Saidur, R., Masjuki, H.H., Johan, M.R. Structural, optical and morphological properties of TiO2/Ag/ TiO2 multilayerfilms(2009) AIP Conference Proceedings, 1136, pp. 229- 233. (ISI/SCOPUS Cited Publication)

Saidur, R., Masjuki, H.H., Hasanuzzaman, M., Performance of an improved solar car ventilator (2009) International Journal of Mechanical and MaterialsEngineering, 4 (1), pp. 24-34. (SCOPUS-Cited Publication)

Tajally, M., Huda, Z., Masjuki, H.H., Effect of cold rolling on bending and tensile behavior of 7075 aluminum alloy (2009) Journal of Applied Sciences, 9(21), pp. 3888-3893. (SCOPUS-Cited Publication)

Mahlia, T.M.I., Husnawan, M., Masjuki, H.H., Chow, K.V., Low, T.S., Liaw, A.W.J., Energy analysis of cooling pump in internal combustion engine (2009)ASME International Mechanical Engineering Congress and Exposition, Proceedings, 8, pp. 249-253. (ISI/SCOPUS Cited Publication)

Mahlia, T.M.I., Husnawan, M., Masjuki, H.H., Remuslara, L., Saidur, R., Energy savings potential by substituting driving with walking and cycling for shortdistance (2009) ASME International Mechanical Engineering Congress and Exposition, Proceedings,7, pp. 3-7. (ISI-Cited Publication)

Husnawan, M; Masjuki, HH; Mahlia, TMI, S. Mekhilef, M.G. Saifullah Use of post flame metal-based and oxygenated additive combination for biodiesel-diesel blends Journal of Scientific & Industrial Research Vol. 68 issue 12, 2009, pp. 1049-1052 (ISI-Cited Publication)

M.J. Ghazali, W.M. Rainforth, S. Abdullah, A.K.A. Ihsan and Masjuki Hassan, Subsurface deformation of worn Al-Cu and Al-Mg Alloys, AdvancedMaterials Research, vols. 33-34, 2008, pp. 483- 488. (SCOPUS-Cited Publication)

R. Saidur, M. M. Hasan, A.S.M.A. Haseeb, H. H. Masjuki, Energy-efficient optical coating for flat glass, Journal of Applied Sciences,2008,Vol. 8, No. 10,pp. 1883-1890. (SCOPUS-Cited Publication)

M.A. Kalam, H.H. Masjuki, M. Redzuan, T.M.I. Mahlia, M. A. Fuad, M. Mohibah, Ku. Halim, A. Ishak and M. Khair, A. Shahrir and A.Yusoff, Developmentand Test of a New Catalytic Converter for Natural Gas Fueled Engine, SAE paper no. 2008-01-1550, USA. (Non-ISI/Non-SCOPUS Cited Publication)



2007

2006

2005

Saidur R, Masjuki H.H, C.Y. Tan, J.K. Ooi, P.H. Yoon, Performance investigation of a solar powered thermoelectric refrigerator, International Journal ofMechanical and Materials Engineering, Vol. 3, Issue 1, 2008, pp. 7-16. (SCOPUS-Cited Publication)

H. Abdesselam, H. H. Masjuki, R. Saidur Rahman and M. Guellal, Performance study of water-to-water heat pump using non-Azeotropic refrigerantmixtures R407C, International Energy Journal, 2008, Vol. 9, Issue 4, pp. 267-274. (Non-ISI/Non-SCOPUS Cited Publication)

M A Kalam, M G Saifullah, H H Masjuki, M Husnawan and T M I Mahlia, PAH and other emissions from coconut oil blended fuels, Journal of Scientific &Industrial Research, CAIR Publisher, vol. 67 (11), November 2008, p. 1031-1035. (ISI/SCOPUS Cited Publication)

Kalam, M.A., H H Masjuki, Saifullah, M.G., Seng, T.B. Envo diesel test on automotive engine-an analysis of its performance and emission results. Int.Journal of Mechanical and Materials Engineering, 2008, vol. 3 No. 1, pp. 55-60. (SCOPUS-Cited Publication)

R. Saidur and H H Masjuki, Application of Artificial Neural Networks to Investigate the Energy Performance of Household Refrigerator-freezers, Journalof Applied Sciences, 8 (11), 2008, pp. 2124-2129 (SCOPUS-Cited Publication)

Nik, W.B.W., Maleque, M.A., Ani, F.N., Masjuki, H.H., Experimental investigation on system performance using palm oil as hydraulic fluid, IndustrialLubrication and Tribology 59 (5), 2007, pp. 200-208.

Saidur R, Sattar MA, Masjuki H.H, Ahmed S and U. Hashim, An estimation of the energy and exergy efficiencies for the energy resources consumptionin the transportation sector in Malaysia, Int. Journal of Energy Policy, Elsevier Science UK, vol. 35, issue 8, August 2007, pp. 4018-4026.

Saidur R, Hasanuzzaman M., Sattar MA and Masjuki H.H, Open and Closed Door Moisture Transport and Corresponding Energy Consumption inHousehold Refrigerator, Journal of Energy and Environment,2007, Vol. 6, pp. 18-27.

M. Husnawan, M.G. Saifullah and H.H. Masjuki, Development of friction force model for mineral oil basestock containing palm olein and antiwearadditive, Journal of Tribology International, vol. 40, Issue 1, January 2007, pp. 74-81.

B.N. Taufiq, H.H. Masjuki, T.M.I. Mahlia, M.S. Faizul, R. Saidur, E. Niza Mohamad, Second law analysis for optimal thermal design of radial fin geometryby convection, Int. Journal of Applied Thermal Engineering, Elsevier Ltd., UK, vol. 27, 2007, pp. 1363-1370.

M.U. Aslam, H.H. Masjuki, M.A. Kalam, H. Abdesselam, T.M.I. Mahlia and M.A. Amalina, An Experimental Investigation of CNG as an Alternative Fuelfor a Retrofitted Gasoline Vehicle, FUEL (Int. Journal), Elsevier Science U.K, vol. 85, Issues 5-6, March 2006, pp. 717-724.

H. Abdessalam, H H Masjuki, M. Guellal and S. Rahman, Performance evaluation of environmental friendly refrigerant for high temperature heat pumps,AMSE Best of Book 2006, pp. 16-25 (Non-ISI/Non-SCOPUS Cited Publication)

Varman, M; Mahlia, TM; H H Masjuki, Method for calculating annual energy efficiency improvement of TV sets, Int. Journal of Energy Policy, ElsevierScience UK, 2006, vol. 34, no. 15, pp. 2429-2432

M. A. Kalam, H. H. Masjuki, Recent developments on biodiesel in Malaysia, Journal of Scientific & Industrial Research, India, vol. 64, no. 11, Nov. 2005,pp. 920-927. (ISI/SCOPUS Cited Publication)

M.A. Kalam, H.H. Masjuki, Effect of coconut oil blended fuels on diesel engines wear and lubrication, Journal of Lubrication Science, vol. 17-4, LeafCoppin France, August 2005, pp.389-402. (ISI/SCOPUS Cited Publication)

Kalam, Md Abul, Masjuki Hj Hassan, Abdesselam Hamlaoui, Amalina Bte Muhammad Afifi, TM Indra Mahlia, and Md Aslam Uddin. "Development of Co-Relation Between Vehicle and Stationary Dynamometer- Engine Emissions." In ASME 2005 Internal Combustion Engine Division Spring TechnicalConference, pp. 101-106. American Society of Mechanical Engineers, 2005. (ISI/SCOPUS Cited Publication)

Rahman, Saidur, Nizam Mohd Sidik, Masjuki HJ Hassan, Tamjis Mohd Rom, and Iswadi Jauhari. "Temperature performance and usage conditions ofdomestic refrigerator-freezers in Malaysia." HKIE Transactions 12, no. 2 (2005): 30-35. (ISI/SCOPUS Cited Publication)

Kalam, Md Abul, Masjuki Hj Hassan, and Edzrol Niza Mohamad. "Wear and Lubrication Characteristics of a Multi-Cylinder Diesel Engine UsingVegetable Oil Blended Fuel." In World Tribology Congress III, pp. 553-558. American Society of Mechanical Engineers, 2005. (ISI/SCOPUS CitedPublication)



2004

2003

2002

Proceeding

2015

2014

2013

J.A. Ghani, I.A. Choudhury and H.H. Masjuki, Application of Taguchi method in the optimization of end milling parameters, Journal of MaterialsProcessing Technology, Elsevier, 2004, No. 145, pp. 84-92. (ISI/SCOPUS Cited Publication)

M.A. Kalam and H.H. Masjuki, Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oil, Int. Journal ofBiomass and Bioenergy, Elsevier U.K., Sept. 2004, vol. 27, no. 3, pp. 289-297 (ISI/SCOPUS Cited Publication)

Kalam, M.A., M. Husnawan and H.H. Masjuki, Exhaust emission and combustion evaluation of coconut oil powered indirect injection diesel engine, Int.Journal Renewable Energy, Paragon Press UK, 2003, vol. 28, no. 15, pp. 2405-2415. (ISI/SCOPUS Cited Publication)

Husnawan M., Masjuki H.H., M.D. Irfan, Exhaust emission evaluation of a single cylinder diesel engine fueled by crude palm oil (CPO) water emulsions ,SAE Paper 2003-01-1931/JSAE 20030030, SAE Int., USA 2003, pp.1-5

T.M.I. Mahlia, H.H. Masjuki, I.A. Choudhury, Saidur. R and Noor Leha, Projected electricity savings from implementing minimum energy efficiencystandard for household refrigerators in Malaysia, Energy Journal, Elsevier Science Ltd, U.K., 2003, vol. 28, no. 7, pp. 751-754 (ISI/SCOPUS CitedPublication)

M.A. Kalam and H.H. Masjuki, Use of additive in biofuel to evaluate emission, engines component wear and lubrication characteristics, "Journal ofAutomobile Engineering (Part D)", I.Mech.E, London, 2002, Vol.216, No. 9, pp. 751-758.

T.M.I. Mahlia, H.H. Masjuki, and I.A. Choudhury, A theory on energy efficiency standard and label, Energy Conservation and Management an Int.Journal, Elsevier Science Ltd, U.K., 2002, Vol.43 (6), pp.743-761 (ISI/SCOPUS Cited Publication)

M.A. Kalam and H.H. Masjuki, Biodiesel from palmoil-an analysis of its properties and potential, Int. Journal of Biomass & Bioenergy, Pergamon UK,2002, Vol. 23, No.6, pp. 471-479. (ISI/SCOPUS Cited Publication)

M. I. A. Bakar, M. N. A. Yusoff, H. H. Masjuki and N. W. M. Zulkifli. The Effects of Palm Waste Bio-Based As Fuel Additive on SI Engine Performance.3rd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR 2015), 1-3 December 2015, Holiday Inn,Melaka, Malaysia.

H.G. How, H.H. Masjuki, M.A. Kalam and Y.H. Teoh. Evaluation of Performance, Combustion, Regulated and Particulate Matter Emissions of aCommon-Rail DI Engine Fuelled with Moringa Oleifera Biodiesel. 3rd International Conference on Recent Advances in Automotive Engineering &Mobility Research (ReCAR 2015), 1-3 December 2015, Holiday Inn, Melaka, Malaysia.

Y.H. Teoh, H.H. Masjuki, M.A. Kalam and H.G. How. Development of Electronically Controlled Common- Rail Fuel Injection System and Its ApplicationStrategy in Single-Cylinder Diesel Engine. 3rd International Conference on Recent Advances in Automotive Engineering & Mobility Research (ReCAR2015), 1-3 December 2015, Holiday Inn, Melaka, Malaysia.

N.W.M. Zulkifli, H.H. Masjuki, M.A. Kalam, S.S.N. Azman, Lubricity of bio-based lubricant derived from different chemically modified fatty acid methylester, in: 41st LEEDS-LYON SYMPOSIUM on TRIBOLOGY, Leeds Trinity University, 2014. (ISI-Cited Publication)


Imran A, Masjuki HH, Kalam MA, Varman M, Hasmelidin M, Almahmud KAH, Shahir SA, Habibullah M. Study of friction and wear characteristic ofJatropha oil blended lube oil. The Malaysian International Tribology Conference 2013 (MITC2013), 18-20 November 2013, Kota Kinabalu, Sabah,Malaysia.




2012

2011

Masum BM, Kalam MA, Masjuki HH, Palash SM. Study on the effect of adiabatic flame temperature on NOx formation using ethanol gasoline blend in SIengine. The 2013 International Forum on Mechanical and Material Engineering (IFMME 2013), 13-14 June, 2013, Guangzhou, China.

Arbab MI, Masjuki HH; Varman M, Kalam MA, Imtenan S, Sajjad H. Experimental Investigation of Optimum Blend Ratio of Jatropha, Palm and CoconutBased Biodiesel to Improve Fuel Properties, Engine Performance and Emission Characteristics. SAE/KSAE 2013 International Powertrains, Fuels &Lubricants Meeting, 21-23 October 2013, Seuol, Korea.

How HG, Masjuki HH, Kalam MA, Teoh YH, Abdullah MA. Effect of injection timing on performance, emission and combustion characteristics of acommon-rail diesel engine fuelled with coconut oil methyl ester. SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting, 21-23 October2013, Seuol, Korea.

Alam T, Al Mahmud KHA, Hasan MF, Shahir SA, Masjuki HH, Kalam MA, Imran A, Mobarak HM. Effect of Magnesia on Zinc Oxide Stabilized NanoAlumina Ceramic Powder in Sintering Process and Its Impact on Mechanical Properties. The Malaysian International Tribology Conference 2013(MITC2013), 18-20 November 2013, Kota Kinabalu, Sabah, Malaysia.

Rizwanul Fattah IM, Masjuki HH, Kalam MA, Varman M. Effect of antioxidant added coconut biodiesel blends on emission characteristics of a heavy-duty diesel engine. The 2013 International Conference on Frontiers of Environment, Energy and Bioscience (ICFEEB 2013), 24-25 October 2013,Beijing, China

Masjuki HH, Kalam MA, Varman M, Ashrafur Rahman SM, Rizwanul Fattah IM, Mofijur M. Biofuel: Prospects and challenges as cleaner energy source.The 6th AUN/SEED-Net Regional Conference On Energy Engineering (RCEneE), 6-7 September 2013, Institut Teknologi Bandung, Indonesia.

Teoh YH, Masjuki HH, Kalam MA, Amalina MA, How HG. Impact of waste cooking oil biodiesel on performance, exhaust emission and combustioncharacteristics in a light-duty diesel engine. SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting, 21-23 October 2013, Seuol, Korea.

Masjuki HH, Kalam MA, Mofijur M, Shahabuddin M. Biofuel: policy, standardization and recommendation for sustainable future energy supply. TheMediterranean Green Energy Forum (MGEF-13), 16-20 June 2013, Fes, Morocco.

M. Shahabuddin, H.H. Masjuki, M.A. Kalam, M.A. Hazrat, M. Mofijur, Vizy Nazira, M.Varman, A.M. Liaquat, 2012.Biofuel: Potential Energy Source inRoad Transportation Sector in Malaysia, SUSTAINABLE FUTURE ENERGY 2012 and 10th SEE FORUM, Innovations for Sustainable and SecureEnergy,pp. 98-110. 21-23 November, Brunei Darussalam


Liaquat AM, Masjuki HH, Kalam MA, Varman M. Engine performance and exhaust emissions of a single cylinder CI engine fuelled with coconut biodieselblended fuels. 5th AUN/SEED-Net Regional Conference on New/Renewable Energy 26-27 September 2012, School of Transportation Engineering,Hanoi University of Science and Technology.

Shahabuddin M, Masjuki HH, Kalam MA. Experimental investigation into tribological characteristics of bio-lubricant formulated from Jatropha oil. 5thBSME International Conference on Thermal Engineering, 21-23 December 2012, Dhaka, Bangladesh.

Masjuki HH, Kalam MA. An overview of biofuel as a renewable energy source: Development and Challenges. 5th BSME International Conference onThermal Engineering, 21-23 December 2012, Dhaka, Bangladesh. (Keynote)

Liaquat AM, Masjuki HH, Kalam MA, Bhuiya MMK, Varman M. Influence of coconut biodiesel and waste cooking oil blended fuels on engineperformance and emission characteristics. Proceedings of the 2012 Fall Conference of the ASME Internal Combustion Engine Division (ICEF2012), 23-26 September 2012, Vancouver, BC, Canada.

Liaquat AM, Masjuki HH, Kalam MA, Varman M. Impact of biodiesel on injector deposit formation. 5th AUN/SEED- Net Regional Conference onNew/Renewable Energy 26-27 September 2012, School of Transportation Engineering, Hanoi University of Science and Technology.

Liaquat AM, Masjuki HH, Kalam MA, Rizwanul Fattah IM, Hazrat MA, Varman M, Mofijur M, Shahabuddin M. Effect of coconut biodiesel blended fuels onengine performance and emission characteristics. 5th BSME International Conference on Thermal Engineering, 21-23 December 2012, Dhaka,Bangladesh.

Liaquat AM, Masjuki HH, Kalam MA, Varman, M, Hazrat MA. Experimental analysis on engine performance and emission characteristics using biodieselobtained from non-edible oil. Regional Conference on Automotive Research (ReCAR 2011), 14-15 December 2011, Kuala Lumpur, Malaysia.

Liaquat AM, Masjuki HH, Kalam MA, Varman M. Friction and wear characteristic of waste vegetable oil contaiminated lubricants. Regional Tribology




2010

AREAS OF RESEARCH (Project title), (Role), (From)-(Until), (Source), (Level).

Conference (RTC 2011), 22-24 November 2011, Bayview Hotel, Langkawi, Malaysia.

Liaquat AM, Masjuki HH, Kalam MA, Varman M, Hazrat, MA, Shahabuddin M, Mofijur M. Application of blend fuels in a diesel engine. 2nd InternationalConference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011,Bangkok, Thailand.

Mofijur M, Masjuki HH, Kalam MA, Shahabuddin M, Hazrat MA, Liaquat AM. Palm oil methyl ester and its emulsions effect on lubricant performance andengine components wear. 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011, Bangkok,Thailand

Shahabuddin M, Masjuki HH, Kalam MA, Mofijur M, Hazrat MA, Liaquat AM. Effect of additive on performance of C.I. engine fuelled with bio diesel. 2ndInternational Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011, Bangkok, Thailand.

A.M. Liaquat, H.H. Masjuki, M.A. Kalam, A. Rasyidi. Experimental Analysis of Wear and Friction Characteristics of Jatropha Oil added Lubricants. The2010 International Conference on Mechanical and Aerospace Engineering (ICMAE 2010), Kuala Lumpur, Malaysia, Pp. 184 - 188, 26 - 28 November,2010. (Non-ISI/Non-SCOPUS Cited Publication)

5 kW Power Conditioning Unit for Micro-cogeneration Fuel Cell System, Co-Investigator, 2009-2011, ScienceFund, National

An Engineering Analysis to Identify Energy Inefficient Residential Electrical Appliances and Setting Energy-Efficient Guidelines for TheseAppliances, Project Leader, 1997-2002, ScienceFund

Automobiles fuel economy standards and label: implementation possibilities in Malaysia, Co-Investigator, 2011-2015, Geran Penyelidikan UniversitiMalaya (UMRG), National

Biodiesel carbon deposit study using single cylinder engine, Principal Investigator(PI), 2007-2008, Geran Penyelidikan Universiti Malaya(UMRG), University

Biofuel, Principal Investigator(PI), 2008,

CHARACTERIZATION OF DIFFERENT BLENDS PRODUCED FROM PETROLEUM DIESEL AND THREE INDIVIDUAL BIODIESEL OBTAINEDFROM PALM, SOYBEAN AND RAPESSED OILS, Principal Investigator(PI), 15/04/2010, , 14/04/2012

CNG/DI engine and transmission-Fuel System, -Project Leader, 2002-2006, ScienceFund

COMPOSITIONAL INSTABILITY OF PALM BIODIESEL AND REMEDIAL MEASURES, Co-Researcher, 15/06/2012, Geran Penyelidikan UniversitiMalaya (UMRG) - AET (Innovative Technology (ITRC)), 28/02/2015

Clean diesel technology for military and civilian transport vehicles (HIR grant, RM 5.50mil.), Principal Investigator(PI), 2011-2015, High ImpactResearch (HIR)

Climatical Degradation of Transparent heat Mirrors, Project Leader, 1997-1999, Nippon Sheet Glass Foundation Project

Design and development of a car ventilator powered by solar energy, Co-Investigator, 2006-2008, ScienceFund, National

Design of clothes dryer from room air conditioners waste heat, Co-Investigator, 2007-2009, ScienceFund, National

Dev. of environmental-safe biobased hydraulic fluid by chemical modification technique (based at Uni. Malaysia Trengganu), Co-Investigator, 2006-2009, MOSTI, National

Development and Implementation of a Control System for Natural Gas fuelled Automobile Engine, Project Leader, 1996-2009, Geran PenyelidikanUniversiti Malaya (UMRG), National

Development and performance investigation of a domestic refrigerator using hydrocarbons and refrigerant mixtures, Researcher, 2002-2006, MOSTI(IRPA), National

Development and performance investigation of a domestic refrigerator using hydrocarbons and refrigerant mixtures, -Researcher, 2004-



2006, ScienceFund

Development of Catalytic Fluid Pyrolysis Process from Oil Palm Biomass for Bio-Fuel Production, Co-Investigator, 2009-2011, ScienceFund

Development of Highly Efficient Fermentation Process for Bioethanol from Woody Biomass and Performance Study of a Small Diesel Engine UsingEthanol-blended Fuels, Co-Investigator, 2008-2010, ScienceFund, National

ENGINEERING AND ECONOMIC ANALYSIS OF JATROPHA CURCAS OIL, Co-Investigator, 01/11/2010, ScienceFund, 31/10/2011

EXPERIMENTAL STUDY OF TRIBOLOGICAL PROPERTIES OF DIAMOND-LIKE-CARBON (DLC) COATINGS FOR ENGINE CYLINDER, PrincipalInvestigator(PI), 2012-2015, Geran Penyelidikan Universiti Malaya (UMRG), National

Effect of Palm Oil Diesel on the Wear Rate of Metals and Small Diesel Engine Components, Principal Investigator(PI), 1992-1998, Short TermResearch Fund (Vote F)(PJP), National

Effect of vegetable oil blended lubricant on the performance and durability of small diesel engine, Principal Investigator(PI), 2008-2009, Short TermResearch Fund (Vote F)(PJP)

Energy Conservation in Industry, Project Leader, 1992-1997, ASEAN-AUSTRALIAN AAECP, International

Energy Efficiency, Project Leader, 2008,

Energy efficient nano coating to control solar radiation through the glasses of building windows, Co-Investigator, 2006-2008, ScienceFund

Energy efficient nano coating to control solar radiation through the glasses of building windows, Co-Investigator, 2007-2009, ScienceFund, National

Exhaust Gas Emission Control and Noise Reduction of Automotive Engines (Low Cost Catalytic Converter Development), Project leader, 1999-2003, ScienceFund

Experimental Investigation of New Bioenergy sources for Biofuel from Tropical Biodiversity, Co-Investigator, 2011-2015, High Impact Research (HIR)

Extensive Studies on Fame Oxidation and Thermal Stability (Project number: RG040-09AET,RM180,000)., Co-Investigator, 2009-2012, GeranPenyelidikan Universiti Malaya (UMRG), National

Feasibility study on the extensive utilization of biodiesel produced from waste and/or pure oils/fats in the public vehicle in Hangzhou (China) andpreparations for the implementation of a demonstration plant, -Project Leader, 2006-2008, EU-ASIA Research Grant

Fuel system; Direct Injection Natural Gas Technology, June 2002 - June 2006, Project Leader (Sub-Group Leader), Coordinator, 2002-2006, MOSTI(IRPA), National

IC Engines, Coordinator, 2008,

INVESTIGATION OF CORROSION OF AUTOMOTIVE MATERIALS IN PALM BIODIESEL, Coordinator, 15/04/2010, , 14/04/2011

Investigation into Fuel Property Effects on Ignition Control and Unregulated Emissions in Homogeneous Charge Compression IgnitionEngine, Principal Investigator(PI), 2012-2014, Geran Penyelidikan Universiti Malaya (UMRG), National

Modeling, Design and Efficient Performance Appraisal of Automobile Engine combustion Chamber and Injector, Project Leader, 1996-2001, ScienceFund

Modeling, design, modification and test of lubricant and cooling system of a new free piston gas linear generator, -Project Leader, 2002-2005, MOSTI(IRPA), National

Modeling, design, modification and test of lubricant and cooling system of a new free piston gas linear generator, Project Leader, 2002-2005, ScienceFund

Modeling, design, modification and test of a higher efficiency palm oil diesel (POD) fueled compression ignition engine., -Project Leader, 2002-2006, MOSTI (IRPA), National

Modelling, Simulation And Redesign of Electric Fan Blades to Optimize Energy Performance, Co-Investigator, 2007-2009, Short Term Research Fund(Vote F)(PJP), University

Nanocomposite Based Eco-Friendly Solder for Microelectronic Packaging Applications, Co-Investigator, 2007-2009, ScienceFund



CONSULTATION PROJECT/CONSULTANCY (Project title), (Role), (From)-(Until), (Organisation).

Nanocomposite Based Eco-Friendly Solder for Microelectronic Packaging, -Researcher, 2007-2009, ScienceFund

ON-BOARD EMULSIFIER FUEL SYSTEM FOR COMMERCIAL DIESEL ENGINE, Principal Investigator(PI), 2013-2015, PRPUM, National

OPTIMIZATION OF HIGH QUALITY BIODIESEL FUEL FOR HIGHER THERMAL EFFICIENCY AND GREENHOUSE GAS (GHG) REDUCTION INAUTOMOBILE ENGINE, Principal Investigator(PI), 2013-2016, Fundamental Research Grant Scheme (FRGS), National

Optimization of High Quality Biodiesel Fuel for Higher Thermal Efficiency and Greenhouse Gas (GHG) Reduction in Automobile Engine, PrincipalInvestigator(PI), 15/05/2013, Fundamental Research Grant Scheme (FRGS), 14/05/2016

Palm Biodiesel Properties Enhancement for Automotive Application, -Project Leader, 2008-2010, ScienceFund, National

Palm Diesel Properties Enhancement for Automotive Application, -Project Leader, 2008-2010, ScienceFund, National

Palm Oil Emulation as Cutting Fluid, Project Leader, 1991-1993, Geran Penyelidikan Universiti Malaya (UMRG), National

Performance and emission study of a new direct injection (DI) compressed natural gas (CNG) engine, -Project Leader, 2002-2006, MOSTI(IRPA), National

Performance and emission study of a new direct injection (DI) compressed natural gas (CNG) engine, -Project Leader, 2002-2006, ScienceFund

Performance, Emission and Tribological Study of Gasoline, Diesel, Natural Gas and Vegetable Oil Fuelled Automobile Engine, Project Leader, 1992-2009, Geran Penyelidikan Universiti Malaya (UMRG), National

Phase Change material (PCM) for energy storage system, Co-Investigator, 2011-2015, High Impact Research (HIR)

STUDY ON BIOFUEL PROPERTIES FOR INTERNAL COMBUSTION ENGINE, Co-Investigator, 15/12/2009, High Impact Research(HIR), 14/03/2011

STUDY ON NOISE AND EXHAUST EMISSIONS OF A BIODIESEL FUELED ENGINE, Co-Investigator, 15/04/2010, High Impact Research(HIR), 14/04/2011

Study of Corrosion and Tribo-Corrosion of Automotive Components and Their Durability in Palm Oil Base Fuel, Co-Investigator, 2008-2009, ScienceFund

TRIBOLOGICAL STUDIES AND PERFORMANCE EVALUATION OF PALM DIESEL FUELLED COMPRESSION IGNITION, Co-Investigator, 01/11/2010, ScienceFund, 31/10/2011

Time-Based/Transient Simulation of Engine Coolant Peak Temperature After Key-Off(Techno Fund Proejct, RM538,600)., PrincipalInvestigator(PI), 2009-2012, ScienceFund, National

Tribological Studies on Non-edible Vegetable Oil Based Biodiesel in Diesel Engine Components, Principal Investigator(PI), 2011-2013, GeranPenyelidikan Universiti Malaya (UMRG), National

Tribology, Principal Investigator(PI), 2008,

Virtual design and manufacture of low head and low flowrate micro-hydro turbines, Co-Investigator, 2007-2009, ScienceFund, National

Fuel additives testing at tribology lab department of Mechanical Engineering, UM, Consultant, 2015-2015, International Islamic Univesity, IIUM,Malaysia

Biopro Additive testing on coal, Consultant, 2015-2015, Eco Green Maintenance Sevices Sdn Bhd

Fuel additives testing at department of Mechanical Engineering, UM, Consultant, 2015-2015, UKM, Malaysia

Fuel additive testing at engine tribology laboratory,UM, Coordinator, 2008-2008, DXN BIOTECH CONSULTANTS SDN.BHD

Biodiesel fuel testing at engine tribology laboratory, UM., Chairman, 2008-2008, Mr. Kumaran Palannisamy Senior Lecturer Dept. of Mechanical



AWARDS AND RECOGNITIONS (Name of Award), (Awarding Institution), (Year Awarded), (Level).

Engineering

Fuel efficient booster testing at engine tribology laboratory, UM, Chairman, 2008-2008, NEW WORLD MARKETING SDN BHD

Lubricant oil test (EVP oil) in multi cylinder engine, Coordinator, 2008-2008, ABEX MANUFACTURING SDN.BHD

Lubricant test at engine tribology laboratory, UM, Consultant, 2007-2008, Quantum Global Trading Sdn Bhd

A detailed study on consumer behaviour towards electricity consumption and end uses of electricity in the industrial sector, Consultant, 2006-2009,TENAGA NASIONAL BERHAD/National Electricity Board

Energy study in transportation sector in Malaysia, Chief Local Consult., 2004-2004, Economic Planning Unit in Collaboration with DANIDA of Denmark

Study of NGV Usage in Malaysia, Consultant, 2004-2004, Domestic Trade Division (KPDNHEP)

Energy use in the transportation sector in Malaysia, Chief Local Consult., 2004-2005, Economic Planning Unit in Collaboration with DANIDA ofDenmark

Survey on CNG usage in Malaysia, Chief Consultant, 2003-2003, Ministry of Domestic Trade and Consumer Affairs

Iron Oxide Pigments Production, Consultant, 2003-2005, IOP Specialist Sdn Bhd

Contextual Learning Module for Mechanical Engineering Field, Consultant, 2001-2002, METEOR-CORD International, USA-Ministry of EducationMalaysia

University of Malaya Excellence Award 2015, University of Malaya, 2015, (UNIVERSITY)

Pecipta Gold Award, Ministry of Higher Education, 2015, (INTERNATIONAL)

Pecipta Best Award, Ministry of Higher Education, 2015, (INTERNATIONAL)

Gold Medal - Malaysia Technology Expo 2014 (MTE 2014), Malaysia Association of Research Scientists (MARS), 2014, (NATIONAL)

Top Research Scientist Malaysia (TRSM), Akedemi Sains Malaysia, 2014, (NATIONAL)

Best of the Best Award for "Diffuser Augmented Dual-Rotor Energy Recovery Wind Turbine Generator", University of Malaya, 2013, (UNIVERSITY)

Bronze Prize for "Eco-Greenergy interactive Outdoor Lighting System (powered by shroud wind turbine & solar panel), Korea Invention PromotionAssociation, 2013, (INTERNATIONAL)

ITEX GOLD MEDAL for the invention "SMART ECO-GREENERGY WIND-SOLAR HYBRID CHARGING STATION FOR ELECTRIC BICYCLE INGREEN CITIES", Ministry of Science, Technology and Innovation, 2013, (NATIONAL)

Gold Prize for invention of "Shroud-Augmented Dual-Rotor Exhaust Air Energy Recovery Wind Turbine Generator", Korea Invention PromotionAssociation, 2013, (INTERNATIONAL)

Gold Medal for the invention/innovation of "Eco-Greenergy Outdoor Lighting System", Malaysian Association of Research Scientists, 2013,(NATIONAL)

Fellow Institute of Mechanical Engineer UK (FIMechE) & CEng, Institute of Mechanical Engineer UK, 2013, (INTERNATIONAL)

Silver award for "NANO-OIL FOR A GREENER FUTURE" at BioInnovations Awards 2013, Malaysian Association of Research Scientists, 2013,(NATIONAL)

Diploma for the participation at the International Trade Fair IENA 2012, Ideas-Inventions-New Products., International Trade Fair., 2012,(INTERNATIONAL)

Bronze medal for Safety of Hydrogen Engine (Um Expo January 2009), University of Malaya, 2009, (UNIVERSITY)



PRESENTATIONS (Title), (Event), (Date Presented), (Organiser), (Level).

Pleanary/keynote Speaker

Invited Speaker

Oral

Excellence Award, University of Malaya, 2008, (UNIVERSITY)

Special Most Refereed Journal Award, University of Malaya, 2007, (UNIVERSITY)

Winner of Bronze Medal, Research, Invention and Innovation EXPO 2007 (Natural Gas Powered Motorcycle), University of Malaya, 2007,(UNIVERSITY)

Winner of Bronze Medal, Research, Invention and Innovation EXPO 2007 (Ozone friendly refrigerant for refrigerator), University of Malaya, 2007,(UNIVERSITY)

Winner of Gold Medal, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (ITEX 2006)-CNG/DI Group-IRPA Project,MOSTI and MINDS, Kuala Lumpur, 2006, (INTERNATIONAL)

Winner of Gold Medal, Research, Invention and Innovation EXPO 2006 (CNG/DI), University of Malaya, 2006, (NATIONAL)

Winner of Special Award, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (ITEX 2006)-CNG/DI Group-IRPA Project,MOSTI and MINDS, Kuala Lumpur, 2006, (INTERNATIONAL)

Winner of Gold Medal with Mention, 55th World Exhibition on Innovation, Research and New Technologies, (BRUSSELS EUREKA 2006) CNG/DIGroup-IRPA Project, BRUSSELS-EUREKA, CPE Exhibition, Brussels, Belgium , 2006, (INTERNATIONAL)

Winner of Special Award, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (ITEX 2006)-CNG/DI Group-IRPA Project,MOSTI and MINDS, Kuala Lumpur, 2006, (NATIONAL)

Winner of Silver Medal, 17th International Invention, Innovation, Industrial & Technology Exhibition 2006 (ITEX 2006)-BIOFADD, MOSTI and MINDS,Kuala Lumpur, 2006, (INTERNATIONAL)

Prospects of biofuel as a driving fuel in transport sector., 3rd International Conference and Exhibition on Sustainable Energy and Advanced Materials(ICE-SEAM 2013), 30 Oct 2013 to 31 Jan 2014, Universiti Teknikal Malaysia, (National)

An overview of biofuel as a renewable energy source: Development and Challenges, 5th BSME International Conference on Thermal Engineering, 21Dec 2012 to 23 Dec 2012, Bangladesh Society of Mechanical Engineers, (International)

Impact of Various Biodiesel Blends on Engine Lubricating Oil during Endurance Test, International Symposium on Energy Technology and Strategy,ISETS 2012, 22 Nov 2012 to 24 Nov 2012, (International)

Tribology Research Activities in MYTRIBOS and University of Malaya, Malaysia-Japan Tribology Meeting, 27 Aug 2012 to 28 Aug 2012, MJIIT UTMKL Campus, (International)

Development of energy efficiency standard and its impact on refrigerator-freezers energy consumption, Int. conf. On Domestic Use of ElectricalEnergy, 01 Apr 2002 to 03 Apr 2002

High Performance Gas Engine with Direct Injection, JSPS-VCC Group Seminar2008, Natural Resources and Energy Environment, 27 Nov 2008 to 28Nov 2008, JSPS-VCC

State of quality management practices in SMIs: An empirical study, The International Industrial Engineering Conference, 19 Dec 2004 to 24 Dec 2004

Exhaust Emission and Performance Evaluation of A Modified Spark Ignited Natural Gas Engine, JSPS-VCC Program on Environmental Science,Engineering and Ethics, 07 Sep 2004 to 09 Sep 2004



Presenter

Engine performance and exhaust emissions of a single cylinder CI engine fuelled with coconut biodiesel blended fuels., The 5th AUN/SEED-NetRegional Conference on New/Renewable EnergySchool of Transportation Engineering, 26 Sep 2012 to 27 Sep 2012, AUN/SEED-Net & HanoiUniversity of Science and Technology, (International)

Lubricity of bio-based lubricant derived from different chemically modified fatty acid methyl ester, 41st LEEDS-LYON SYMPOSIUM on TRIBOLOGY,01 Sep 2014

The progress of biofuel towards achieving a sustainable world., Second International Conference on Electrical Engineering And Control Applications2014 (ICEECA 2014), 18 Nov 2014 to 20 Nov 2014, Departement of Electronics, Faculty of sciences and Technology, University Constantine, Algeria,(International)

Biofuel: policy, standardization and recommendation for sustainable future energy supply., The Mediterranean Green Energy Forum (MGEF-13), 16Jun 2013 to 20 Jun 2013, KES UK

Storage Stability of Biodiesel. International Symposium on Energy Technology and Strategy, International Symposium on Energy Technology andStrategy, ISETS 2012, 22 Nov 2012 to 24 Nov 2012, (International)

Experimental investigation into tribological characteristics of bio-lubricant formulated from jatropha oil., 5th BSME- ICTE, 21 Dec 2012 to 23 Dec 2012,BSME, (International)

An experimental investigation of the biodiesel stability by means of oxidation and property determination, The Energy & Materials ResearchConference (EMR2012), 20 Jun 2012 to 22 Jun 2012, Spain Formatex Research Center, (International)

Thermal Systems Modeling and Simulation, SAE 2012 World Congress, 24 Apr 2012 to 26 Apr 2012, SAE International, (International)

Impact of biodiesel on injector deposit formation, The 5th AUN/SEED-Net Regional Conference on New/Renewable EnergySchool of TransportationEngineering, 26 Sep 2012 to 27 Sep 2012, AUN/SEED-Net & Hanoi University of Science and Technology, (International)

Performance and Emissions Characterization of Diesel Engine Running With Re-formulated Palm Oil Methyl Ester-Diesel Blended Fuel, 4thInternational conference on thermal engineering: Theory and Application, 12 Jan 2009 to 14 Mar 2009

Lubricity Study of Waste Cooking Oil, 1st Workshop on New/Renewable Energy, 11 Mar 2009 to 13 Mar 2009, AUN/SEED-Net

Energy and Electricity Consumption Analysis of Malaysian Industrial Sector, 4th International conference on thermal engineering: Theory andApplication, 12 Jan 2009 to 14 Mar 2009

Wear and Friction Characteristics of Palm Oil Lubrication on Diamond-like Carbon Coating over Ni-resist Cast Iron, 2nd Int. Conference on AdvancedTribology 2008, 03 Dec 2008 to 05 Mar 2009

Energy Analysis of Cooling Pump in Internal Combustion Engine, 2008 International Mechanical Engineering Congress & Exposition, 31 Oct 2008 to06 Nov 2008, ASME

Effects of Annealing Treatment on Optical Properties of Anatase TiO2 Thin Films, International Conference on Electric Power and Energy Systems,04 Jul 2008 to 06 Jul 2008, World Academy of Science

Energy Savings Potential by Substituting Driving With Walking and Cycling for Short Distance, the 2008 International Mechanical EngineeringCongress & Exposition, 31 Oct 2008 to 06 Nov 2008

Energy and emissions analysis for household appliances in Malaysia, 22nd Euro conference on operation research, 08 Jul 2007 to 11 Jul 2007

Energy-efficient optical coating for flat glass, AUN/SEED-Net 11th Field-Wise Seminar for Materials Engineering on Nanomaterials & Biomaterials andcomposite for Engineering Application, 15 Nov 2007 to 16 Nov 2007

Pure Butane as Refrigerant in Domestic Refrigerator-Freezer, Second GMSRN International Conference 2007, 12 Dec 2007 to 14 Dec 2007

Friction and wear characteristics of biodiesel contaminated lubricants, Proc. 62nd Annual Meeting, STLE, 06 May 2007 to 10 May 2007

Performance analysis of 1.6L Campro engine using Motec and OEM engine control unit, Proc. Int. Engineering Convention, 10 Mar 2007 to 14 Mar2007

An application of energy and exergy analysis at the transportation sector of Malaysia, Proc. of the 3rd BSME-ASME Int. Conf. On Thermal



Engineering, 20 Dec 2006 to 22 Dec 2006

Friction and wear properties of diamond-like-carbon coating on Ni-resist cast iron under wet and dry condition, Proc. of the 12th Nordic Symposium onTribology, (Nordtrib 2006), 07 Jun 2006 to 09 Jun 2006

Lubricant quality assessment and wear of a biodiesel fueled engine, Proc. of the 3rd. Int. Conf. On Tribology (ASIATRIB 2006), 16 Oct 2006 to 19 Oct2006

Performance assessment of Bi-Fuel engine using gasoline and compressed natural gas as fuel, Proc. of the 3rd BSME-ASME Int. Conf. On ThermalEngineering, 20 Dec 2006 to 22 Dec 2006

Flash Temperature Parameter Number Prediction Model by Design of Tribological Experiments for Basestock Mineral Oil Containing Palm Olein andAminephosphate Additives, World Tribology Congress (WTC III), 12 Sep 2005 to 16 Sep 2005

The effect of oxidized and non-oxidised palm oil methyl ester (POME) on the stability properties during time of storage, Proc. 18th Int. InternalCombustion Engine Symposium, 20 Dec 2005 to 22 Dec 2005

Performance improvement of a diesel engine using additive in palm oil methyl ester, Proc. 18th Int. Internal Combustion Engine Symposium, 20 Dec2005 to 22 Dec 2005

Thermal analysis of diesel engine cylinder head deposits while operated by diesel-water emulsion fuel, 18th Int. Internal Combustion EngineSymposium, 20 Dec 2005 to 22 Dec 2005

Emissions Characteristics of a Modified CNG Gasoline-Cycle Engine, Proc. of Asia Pacific oil and gas conference and exhibition, 05 Apr 2005 to 07Apr 2005

Development NOx emission predicted model for Palm Oil Methyl Ester fuelled diesel engine using Response Surface Methodology, World RenewableEnergy Congress-VIII, 28 Aug 2004 to 03 Sep 2004, WREN and NREL-USA

The use of Palm Oil Methyl Ester (POME) blended additive on turbocharged diesel engine, 7th Asia Pacific International Symposium on Combustionand Energy Utilization, 11 Dec 2004 to 14 Dec 2204

The investigation of palm oil containing amine phosphate as an alternative lubricant, 1st Inter. Conf. On Advanced Tribology (ICAT 2004), 01 Dec2004 to 13 Dec 2004, NUS-Singapore

Thermal stability and effect of variable shear rate and temperature on oquette flow viscosity of natural plant oil, Int. Conf. On Fluid and ThermalEnergy Conversion 2003, 07 Dec 2003 to 11 Dec 2001

Performance of P10 TiN Coated Carbide Tools When End Milling AISI H13 Tool Steel At High Cutting Speed, Int. Conf. On Advances in Materials andProcessing Technologies (AMPT 2003), 08 Jul 2003 to 11 Jul 2003

Performance and Emissions Analysis of Biodiesel from Palm Oil Powered Diesel Engine with Turbocharger, The 14th Int. Symposium on TransportPhenomena (ISTP-14), 17 Jul 2003 to 22 Jul 2003

Viscometric Property of Several Vegetables Oils, The 14th Int. Symposium on Transport Phenomena (ISTP-14), 17 Jul 2003 to 22 Jul 2003

Deposit formation and gaseous emissions of a small diesel engine when operated on crude palm oil emulsion, 2nd Regional Conference on EnergyTechnology towards a Clean Environment (RCETCE), 12 Feb 2003 to 14 Feb 2003

Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine wear, 13th Int. Colloquium Tribology, 15 Jan 2002 to 17 Jan2002

An investigation on application of SPC tools in a medium sized manufacturing plant, 3rd Int. conf. On Quality and Reliability (ICQR2002), 28 Aug2002 to 31 Aug 2002

Wear Surface Characteristics Study of Piston Ring and Ball Bearing Materials Under Palm Oil Methyl Ester Added Lubricant, 13th Int. ColloquiumTribology, 15 Jan 2002 to 17 Jan 2001

Role of FT-IR in assessing lubricant degradation-A study on palm oil methyl ester blended lubricant, The Second Asia Int. Conf. On Tribology(ASIATRIB 2002), 21 Oct 2002 to 24 Oct 2002

Effect of palm oil methyl ester and its emulsions on lubricant degradation and engine component wear, 2nd world tribology congress, 03 Sep 2001 to07 Sep 2001

Potential energy conversion from palm oil wastes in Malaysia, Int. conf. On integrated renewable energy for regional development, 21 Aug 2001 to 23



Others

Aug 2001

Potential CO2 Reduction by Fuel Substitution to Generate Electricity in Malaysia, Regional World Renewable Energy Congress, 19 Feb 2001 to 22Feb 2001

Coconut oil blended fuel as an alternative and renewable fuel for diesel engines, second International conference and 7th annual paper meet of theMechanical Engineering Division, 25 Oct 2001 to 27 Oct 2001

Minimum Energy Efficiency Standards for Room Air Conditioners in Malaysia: Estimating Electricity Savings Possibilities,, Int. Conference onDomestic Use of Electrical Energy, (DUEE), 18 Apr 2000 to 19 Apr 2000

Energy conservation opportunities in household refrigerator in Malaysia, 51st International appliances technical conference (IATC) 2000, 08 May2000 to 10 May 2000

Potential Electricity Savings by Implementing Energy Efficiency Standards for Household Electrical Appliances in Malaysia, World Renewable EnergyCongress VI (WREC-2000), 01 Jul 2000 to 07 Jul 2000

Combustion Characteristics of Biological Fuel in Diesel Engine, SAE world congress, 06 Mar 2000 to 09 Mar 2000

Corrosion characteristics of palm oil methyl ester blended lubricant under tribocontact, Int. Tribology Conference, 29 Oct 2000 to 02 Nov 2000

Experimental investigation of fuel properties and engine performance characteristics of a diesel engine fueled by optimum blend of palm and coconutbiodiesel under turbocharged and non-turbocharged conditions, 4th International Conference on Environment Science and Engineering, 24 Apr2014 to 26 Apr 2014, (International)

Optimization of fuels containing C2-C6 alcohols and gasoline and their effect on engine performance., The 4th International Conference onEnvironment Science and Engineering (ICESE 2014), 24 Apr 2014 to 26 Apr 2014, (International)

Effects of cam shaft speed and lubricant temperature on lubricant film thickness between Cam/tappet contact., The 3rd Malaysia-Japan Tribologysymposium 2014 (MJTS2014), 12 Nov 2014 to 14 Nov 2014, (International)

Experimental investigation of fuel properties and engine performance characteristics of a diesel engine fueled by optimum blend of palm and coconutbiodiesel under turbocharged and non-turbocharged conditions., The 4th International Conference on Environment Science and Engineering (ICESE2014), 24 Apr 2014 to 26 Apr 2014, (International)

Assessing effect of idling on compression ignition engine operated with Palm, Jatropha and Calophyllum biodiesel blends, The InternationalEngineering for Sustainability Conference 2014, 18 Apr 2014 to 20 Apr 2014, (International)

Tribological characteristics of diamond like carbon coating in the presence of Environment friendly vegetable based oils, International Conference onEngineering Tribology Technology 2014, 21 Nov 2014 to 23 Nov 2014, (International)

Engine performance, emission and combustion characteristics of a common-rail diesel engine fuelled with bioethanol as a fuel additive in coconut oilbiodiesel blends, The 6th International Conference on Applied Energy (ICAE2014), 30 May 2014 to 02 Jun 2014, (International)

Experimental investigation of mustard biodiesel blend properties, performance, exhaust emission and noise in an unmodified diesel engine, The 5thInternational Conference on Environmental Science and Development (ICESD 2014), 19 Feb 2014 to 21 Feb 2014, (International)

Impact of premixed kerosene fuel on performance, emission and combustion characteristics in partial HCCI engine, The 6th International Conferenceon Applied Energy (ICAE2014), 30 May 2014 to 02 Jun 2014, (International)

Thermal Balancing of a multi-cylinder diesel engine operating on diesel, B5 and palm biodiesel blends., The 5th International Conference onEnvironmental Science and Development (ICESD 2014), 19 Feb 2014 to 21 Feb 2014, (International)

Effect of piston material on piston skirt lubrication at initial engine start-up speed, 3rd Malaysia-Japan Tribology Symposium 2014 (MJTS2014), 12Nov 2014 to 14 Nov 2014, Malaysia-Japan International Institute of Technology (MJJIT), (International)


Engine performance, emission and combustion characteristics of a common-rail diesel engine fuelled with bioethanol as a fuel additive in coconut oilbiodiesel blends, The 6th International Conference on Applied Energy (ICAE2014), 30 May 2014 to 02 Jun 2014, National Taiwan University



SUPERVISION

Post Graduate Level (Name of Degree), (Name of Candidates), (Title of Thesis), (Academic Session)

An Experimental Investigation of Denatured Anhydrous Ethanol-gasoline Fuel blends on the Performance and Emission Characteristics of a SIEngine., 2nd International Conference on Mechanical Engineering and Renewable Energy, 01 May 2014 to 03 May 2014, CUET, (International)

Impact of premixed kerosene fuel on performance, emission and combustion characteristics in partial HCCI engine, The 6th International Conferenceon Applied Energy (ICAE2014), 30 May 2014 to 02 Jun 2014, National Taiwan University, (International)

Effect of Synthetic Antioxidants on Emission Characteristics of a Coconut Biodiesel Powered Diesel Engine., 2014 4th International Conference onFuture Environment and Energy,, 04 Jan 2014 to 05 Jan 2014

Optimization of fuels containing C2-C6 alcohols and gasoline and their effect on engine performance. Paper presented at the 2014 4th InternationalConference on Environment Science and Engineering, 24 April 2014 to 26 April 2014, Erzurum, Turkey, 4th International Conference on EnvironmentScience and Engineering, 24 Apr 2014 to 26 Apr 2014, (International)



Effect of Magnesia on Zinc Oxide Stabilized Nano Alumina Ceramic Powder in Sintering Process and Its Impact on Mechanical Properties., TheMalaysian International Tribology Conference 2013 (MITC2013), 18 Nov 2013 to 20 Nov 2013, Malaysian Tribology Society, (International)

Effect of injection timing on performance, emission and combustion characteristics of a common-rail diesel engine fuelled with coconut oil methylester., SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting, 21 Oct 2013 to 23 Oct 2013, KSAE,Korea, (International)

Effect of synthetic antioxidants on storage stability of calophyllum-inophyllum biodiesel., 1st International Conference on the Science and Engineeringof Materials (ICoSEM2013), 13 Nov 2013 to 14 Nov 2013, (National)

INFLUENCE OF COCONUT BIODIESEL AND WASTE COOKING OIL BLENDED FUELS ON ENGINE PERFORMANCE AND EMISSIONCHARACTERISTICS, Proceedings of the 2012 Fall Conference of the ASME Internal Combustion Engine Division (ICEF2012), 23 Sep 2012 to 26Sep 2012, ASME, (International)

Effect of coconut biodiesel blended fuels on engine performance and emission characteristics, 5th BSME International Conference on ThermalEngineering, 21 Dec 2012 to 23 Dec 2012, Bangladesh Society of Mechanical Engineers, (International)

Biofuel: potential energy source in road transportation sector in Malaysia, Sustainable future energy, 21 Nov 2012 to 23 Nov 2012, (International)

Corrosion of Magnesium and Aluminum in Palm Biodiesel: A Comparative Evaluation, 5th BSME International Conference on Thermal Engineering,21 Dec 2012 to 23 Dec 2012, BSME-IUT, (International)

Thermal Engineering and Energy Science, The 5th BSME International Conference on Thermal Engineering, 21 Dec 2012 to 23 Dec 2012, Dept ofMechanical and Chemical Engineering, Islamic University of Technology, (International)

Friction and Wear Characteristics of Palm Biodiesel,, Regional Tribology Conference RTC2011, 22 Nov 2011 to 24 Nov 2011, MyTRIBOS,(International)

Energy Technology and Strategy, International Symposium of Energy Technology and Strategy 2011, 17 Nov 2011 to 19 Nov 2011, Research Centerfor Energy Technology and Strategy, (International)

Integration of 1D and 3D Simulations of Engine Cooling System: After Keyed-Off, 10th International Symposium on Distributed Computing andApplications to Business, Engineering and Science, 2011., 14 Oct 2011 to 17 Oct 2011, DCABES & IEEE, (International)

2nd International Conference on Advances in Energy Engineering (ICAEE 2011), Effect of Additive on Performance of C.I. Engine Fuelled with BioDiesel., 27 Dec 2011 to 28 Dec 2011, (International)



Completed

Terminated

Ongoing

First Degree/diploma/pre-degree (Course Title), (Academic Session), (No. of Candidates)

Completed

Ongoing

INTELLECTUAL PROPERTY RIGHTS (Product Name), (Type), (Reference), (Year), (Level).

EXPERT LINKAGES (Linkages Description), (Organisation), (Year of Involvement), (Duration), (Level).

Test Method and Optimization of Ignition System Parameter Inside CNG/DI Engine , Patent, 050601(1) MBA/JS, 2005, (National)

Method for Controlling Multiple-Injection of Gaseous Fuel In a Direct Injection Engine , Patent, 050688(1) MBA/JS, 2005, (National)

Nozzle And Seat Geometry for Direct Injection , Patent, 050681(1)MBA/JS, 2006

Fuel Rail For Direct Injection Gaseous Engine , Patent, 050684(1)MBA/JS, 2006

AIR DIRECTING SYSTEM TO VEHICLES UNDERHOOD HEAT EXCHANGERS, Patent, PI 2012 004595, 2012, (National)

Air Directing System to Vehicles Underhood Heat Exchangers.(UM.TNC2/UMCIC/603/425), Patent, PI2012004595, 2012, (National)

Electro-Mechanical Arrangement & Control Methodology Development For Transient Cooling System Of Automotive Engine at Idle Speed AndKey-Off Condition.(UM.TNC2 NlIClCl603 I 424), Patent, PI2012003777, 2012, (National)

Compressed Natural Gas Fuel Injection System and Method (MY-141689-A), Patent, MY-141689-A, 2006, (National)

Compressed Natural Gas Fuel Injection System And Method , Patent, 050684(1)MBA/JS, 2006, (National)

JSPS-VCC Collaboration, University of Shiga Prefecture, Japan, 2004, 1, (International)

Top Down IRPA Project RMKe8 (CNG/DI), UM, UKM, UTM, UPM, USM, UiTM, UTP, PRSS, 2002, 36, (National)

Top Down IRPA Project RMKe8 (LINEAR GENERATOR), UM, UKM, UTP, 2002, 36, (National)

Asia Pro Eco Project (ASIA-EU), UM,Zhejiang U,Tianjin U,U di Napoli,Austrian Biofuels Institute & U of Cordova, 2006, 18, (International)

Biodiesel for Diesel Engine, Yanmar Co Ltd, Japan, 2007, 24, (International)

JSPS-VCC Collaboration, Kyoto University, Japan, 2000, 120, (International)

Research collaboration with NCKU and University of Malaya, Research Center for Energy Technology and Strategy, NCKU and Centre for EnergySciences, UM, 2012, 60, (International)

Collaboration between NUST and UM in the area of tribology research., National Univesity of Sciences and Technology (NUST) and Centre for



EXPERT/TECHNICAL CONTRIBUTIONS (Activity), (Organisation), (Role), (From)-(Until), (Level).

TEACHING (Course Title), (Academic Session), (No of Student), (No of Contact Hours).

Post Graduate

First Degree

EVALUATION ACTIVITIES

Energy Sciences, University of Malaya (UM), 2013, 12, (International)

Research Collaboration Program, UMP, 2013, 36, (University)

Interview panel for promotion of academic staffs to associate professor up to professor grade A, University of Malaya, One of interviewpanels, 2015-2015, (University)

Interview panel for Student Royal Award (Anugerah DiRaja), University of malaya, One of interview panels, 2015-2015, (University)

Chairperson, Malaysian International Tribology Conference, Malaysian Tribology Society, Chairman, 2013, (International)

ASSESSMENT COMMITTEE MEMBER FOR THE EVALUATION OF ASSOCIATE PROFESSOR POSITION GRADE DS53/54, UniversitiMalaysia Pahang, Committee Member, 2013, (National)

International Scientific Committee member of Asian Conference on Mechanism and Machine Science, Tianjin University, Tianjian, China,Committee Member, 2013, (International)

Research grant applications assessor for IPPP, University of Malaya, Assessor/Evaluator, 2015-2015, (University)

Reviewer of International ISI journals, Elsevier, Hindawi, Springer, Pertanika UPM, MPOB journal etc, Reviewer, 2015-2015, (International)

Editorial board member of ASEAN Engineering Journal, AUN/SEED-Net, Committee Member, 2013-2016, (International)

ASSESSOR OF ACADEMIC STAFF PROMOTION TO THE POST OF ASSOCIATE PROFESSOR GRADE DM54, UNIVERSITI TEKNOLOGIMARA, Committee Member, 2013, (National)

Research grant applications assessor for FRGS and PRGS, Ministry of Higher Education Malaysia, Committee Member, 2015-2015, (National)

Committee Member of Malaysian International Tribology Conference, Sabah, Malaysia, Malaysian International Tribology Society, CommitteeMember, 2013, (International)

ASSESSMENT PANEL MEMBER FOR POST GRADUATE PROGRAM AUDIT, Universiti Teknologi Malaysia, Committee Member, 2013,(National)

INTERVIEW PANEL MEMBER FOR PROMOTION TO THE POST OF ASSOCIATE PROFESSOR AND PRINCIPAL LECTURER, UniversitiTenaga Nasional, Committee Member, 2013, (National)

Assessment Panel Member of Fundamental Research Grant Scheme(FRGS) Phase 2,2013, UNIVERSITI PERTAHANAN NASIONAL MALAYSIA,Committee Member, 2013, (National)

INTERNAL COMBUSTION ENGINE, 2007/2008(1), 14, 6

TRIBOLOGY, 2008/2009(2), 55, 42



EVALUATION ACTIVITIES (Description), (Evaluation Activity),(Year).

The Mechanical Engineering Degree Program, Universiti Teknologi Malaysia, July 2000, External Examiner ,

The Mechanical Engineering Degree Program, Universiti Kebangsaan Malaysia, August 2003, External Examiner ,

The Mechanical Engineering Degree Program, Centre for the Mechanical Engineering Study, Universiti Sains Malaysia (USM), Session 2005/2006.,External Examiner ,

Appointed as panel member of Mechanical Engineering field to prepare criteria according to the field to audit engineering equipment of MalaysianPublic Universities, since January 2008 by Ministry of Higher Education Malaysia, External Examiner ,

Appointed as external examiner for Dept. of Chemistry, Faculty of Science, University of Cairo, Egypt Ph.D. candidate, 26 Nov., 2007, ExternalExaminer ,

Engineering Mechanics: Statics , Published by Dewan Bahasa dan Pustaka, Evaluated for the year 1990 Language Award, Organized by LinguisticAssociation Malaysia with co-operation from Public Bank Berhad., Book ,

Evaluated 4 technical paper for Energy-The Int. Journal, Elsevier USA, 2005,2006 and 2007 Evaluated 2 technical papers for FUEL-The Int.Journal,2007, Article ,

Evaluated 2 technical papers for FUEL-The Int. Journal, Elsevier Japan, 2008. Evaluated 1 technical paper for Int. Journal on Energy, Elsevier USA,2008., Article ,

Four (4) Jordanian Universities, 3.10.1995 - 13.10.1995., External Examiner ,

Polytechnic of Manufacturing (POLMAN ) dan Program Kejuruteraan Aerospace, Institut Teknologi Bandung, Bandung Indonesia, 11 - 16 .4. 1997.,External Examiner ,

Master Thesis, Titled: Evaluation of Friction and Wear Behavior of Coatings and Lubricants Using Tribo-meters and Machining Tests, Student Sdra.Sebastian Dayou, for Universiti Malaysia Sabah, in July 2012., Thesis , (2012-2012)

Master of Science, Titled: Chemical Additives as Cold Flow Improver for Palm Oil and Jatropha Oil Biodiesel Fuels, Student Odeigah Edith Anwunli,For Univerisiti Putra Malaysia, in Mac 2012, Thesis , (2012-2012)

For Faculty of Mechanical Engineering, Universiti Malaysia Pahang, from 13 June 2012 till 12 June 2014, Thesis , (2012-2014)

Master Thesis Mechanical for Student Noor Emilia Ahmad Shafie, For Universiti Teknologi Malaysia, in Mac 2012., Thesis , (2012-2012)

Master of Mechanical Engineering, For Student Mohd Aliff Hafifi Abdullah, Thesis titled as: Development of Notrocellulose based Binder forAluminium, Ammonium Perchlorate Propellant, from Universiti Teknologi Malaysia, in July 2012, Thesis , (2012-2012)

For Master of Mechanical Engineering, titled as: Preparation of Rocket Grade Hydrogen Peroxide and Development of Hydrogen Peroxide Rocket of10N Thrust, for Student Kuberaraaj Nambaraja, from UTM, in July 2012, Thesis , (2012-2012)

For Candidate: Dr. Ir. Saiful Amri bin Mazlan, from MJIIT UTM Kuala Lumpur, in August 2012, Assignment of Associate Professor Position , (2012-2012)

as one of the committee for Candidature Filtering for Academic Staff (JPCSA), Universiti of Malaya, on 29.03.2012., Candidature Filtering of Prof/ Ass.Prof Position , (2012-2012)

for Associate Professor Dr. Faiz Ahmad from Universiti Malaysia Pahang, on 04.07.2012, Assignment of Professor Gred VK7 , (2012-2012)

Penilaian Projek Arus Perdana di bawah Nic Penyelidikan Tenaga Keterbaharuan (tiga (3) projek), for UKM., Project , (2012-2012)

As a committee of Research Grant Evaluation for "Skim Geran Penyelidikan Pembangunan Prototaip" PRGS in year 2012. from 15.02.2012-04.05.2012, KPT., Project , (2012-2012)

Academic Advisor for Faculty of Mechanical Engineering, Universiti Teknologi Mara, from 01.05.2012 till 30.04.2014, Academic Advisor , (2012-2014)

for Tender UM.G/PT1/804/2012/4, Proposal to Renovate and Upgrade Overall Mechanical and Electrical System at Level 1, HIRG Building, UM, inJuly 2012, Tender , (2012-2012)



CONTRIBUTION TO SOCIETY(Contribution To Society), (Level), (Start Date), (End Date).

as a Peer Committee for Evaluation of Academic Staff Promotion for Uniten, 01.07.2012- 30.06.2014., Promotion of Uniten Academic Staff , (2012-2014)

Promotion of 7 persons to Professor VK6, Professor VK7, Associate Prof DS54 respectively, in July 2012, UTM Staff, Promotion of UTM Staff , (2012-2012)

sesi 2011/2012 (bil 2), Ogos 2012, Panel Pemilih Anugerah Pelajaran Diraja , (2012-2012)

as one of the committee for Candidature Filtering for Academic Staff (JPCSA), Universiti of Malaya, on 11.09.2012., Candidature Filtering Of Prof/Ass. Prof Position , (2012-2012)

Committee for "Jawatan Kecil Tetap Sains", initiated by Ministry of Science, Technology and Innovation (Mosti)., National Commission UNESCOMalaysia , (2012-2012)

Appointed as external examiner for PhD thesis titled: AN EXPERIMENTAL INVESTIGATION TO STUDY THE PERFORMANCE, COMBUSTION ANDEMISSION CHARACTERISTICS OF SARDINE OIL FUELLED DI DIESEL ENGINE, Thesis , (2013)

Appointed as external examiner for PhD thesis titled: Influence of Bacillus pumilus on the corrosivity of biodiesel obtained from Jatropha Curcus,Thesis , (2013)

Master of Science in Materials Engineering (Mixed Mode) Academic year 2012/2013 and 2013/2014 of Universiti Sains Malaysia, External Examiner , (2012-2014)

Appointment as an External reviewer for the International Research, Invention and Innovation Exhibition (IRIIE 2015), Article In Proceeding , (2015-2015)

One of the interview panels appointed by UEM to choose the best final year UM Faculty of Engineering student., UEM appointed Interviewer , (2015-2015)

PhD Thesis evaluation, UKM (4 candidates), Thesis , (2015-2015)

External Examiner at University pertahanan Nasional Malaysia, Ext. Examiner of Bachalor of Mechanical Eng Prog , (2015-2015)


MSc thesis evaluation, UNITEN, Thesis , (2015-2015)

PhD Thesis Evaluation, UTHM, Thesis , (2015-2015)

Taylor's University Malaysia Research Proposal for grant application, Project , (2015-2015)

External reviewer of Project Grant application, United Arab Emirates University, Dubai UAE, Project , (2015-2015)


Parent and Teacher Association, Malay Collage, Kuala Kangsar , (Community), 01-feb-05

Malay Collage Old Boys Association, Kuala Lumpur, (Community), 05-apr-96

Mosque Executive Committee Member, Kampung Klang Gate Mosque, Gombak, Selangor , (District), 01-feb-99 until 10-may-01

Area Farmers Association, Hulu Klang, Selangor D.E, (District), 02-may-99

University of Leeds UK, Alumni Society Member, (International), 05-jul-85

University of Malaya Cooperative Member, (University), 11-feb-00



Secretary, Council of National Professors: Engineering and Technology Cluster. Breaking of Fast in the Month of Ramadhan (2015) with orphanage atPAUM, (National), 01-aug-10 until 15-jul-15

Documents

CURRICULUM VITAE - ICAFE Hassan.pdf · Hassan obtained his Mechanical Engineering degree (B.Sc), at Leeds University, Leeds U.K. in 1977. He continued to He continued to pursue his