Upload
others
View
20
Download
0
Embed Size (px)
Citation preview
PLCURR0118 © Knoll, Inc. All rights reserved.Printed in the United States on paper that contains
50% recycled content and 15% post consumer waste.
Knoll, Inc.P.O. Box 1571235 Water StreetEast Greenville, PA 18041
knoll.com
Price ListJanuary 2018
Currents
Currents P
rice List Januuary 2018
Table of Contents
Introduction Knoll and Sustainable Design 2Introduction to Currents 3Currents Textiles 6Currents Color Program 7Currents Legacy Finishes 8Introduction to Upstart 9Original Upstart Planning Examples 10Upstart Color Program 12Upstart Legacy Finishes 13
Service Walls and components Service Wall frames 14Fence frames 15Crown and raceway covers 16Structural base cover kits 17Access covers 19Wall ends and connectors 26Wall frame accessories 32Spine ends and connectors 34End Starters 38Panel system starters and T-ends 40Panel system starters for Dividends Horizon 48Power, data and communications components for Service Walls 49
Screens and add-up panels Linkable screens 57Mobile screens 65Add-up panels 66Add up glass panels, for spine 67Add-up panel connectors and fillers 68Stackable add-up panels 70Stackable add-up connectors and fillers 74
Worksurfaces Worksurfaces, universal 79Currents worksurfaces for Morrison panels and linkable screens 85Cascade edge worksurfaces 91Worksurface, samples 98Worksurface supports 99
Floorstanding storage Pedestals 101Pedestal accessories 103Vertical storage cabinets 106
Service Wall-mounted storage andlighting
Reuter overhead cabinet 108Reuter open overhead 109Reuter open shelf 110Reuter ganging bracket 111Overhead brackets 112Task Lights for Reuter Overhead Storage 113Counter surface 114
Desks and worktables Desks 115Above-desk lighting for desks 123Worktables 124
Upstart table desks and storage Upstart Tables 127Plannable Upstart Tables 132Accessories 141Upstart Privacy Screens 142Plannable Upstart Privacy Screens 143
Wall Mounting of Knoll Products 145
Alpha-Numeric Index 147
Selling Policy 153
KnollKey Lock Program 155
General Ordering Information 156
Currents
PLCURR01181
Copyright � 2017 Knoll, Inc.All rights reserved.All prices effective 1/15/2018.
Knoll and Sustainable Design
Each year Knoll sets key initiatives in our journey to sustainability. We are members of a global consortium on energy, have adopted ascientific, metrics-based approach to sustainable product design, and maintain a leadership position in establishing universal,verifiable, sustainability standards for our industry.
Knoll promotes independent third-party certification because it provides the most impartial and trustworthy foundation for industry-wideenvironmental compliance. Certification by established and respected third parties ensures that all manufacturers are held to the samehigh standards and that customers can trust a company’s declaration about the environmental benefits of its products. Knoll third-partypartners include: the International Standards Organization (ISO); Forest Stewardship Council (FSC�); Rainforest Alliance;GREENGUARD� Environmental Institute; and The Business and Institutional Furniture Manufacturer’s Association (BIFMA) level�certification from Scientific Certification Systems (SCS).
In addition, Knoll is aligned with the U.S. Green Building Council and can help companies, healthcare organizations and educationalinstitutions achieve Leadership in Energy and Environmental Design (LEED�) workplace certification.
Global Climate Change• Knoll is a sponsor of the Clinton Global Initiative, which brings together a community of global leaders to devise and implement
solutions to some of the world’s most pressing challenges, including environmental change.
• Knoll has a comprehensive Energy Management Program to increase energy efficiency in products and processes.
Life Cycle Assessment (LCA) Tool• Life Cycle Assessment is a science-based measurement of a product’s environmental impacts throughout its life cycle, from raw
materials sourcing through manufacture, shipping, use and re-use or end-of-life. LCA enables cradle-to-cradle implementation ofsustainable practices.
Setting Industry Standards• Knoll partners with MTS (The Institute for Market Transformation to Sustainability) to develop the SMaRT© Consensus Sustainable
Products Standards, a set of consensus-based sustainable product standards based on the LEED� model, for all building products,fabric, apparel, flooring and carpet. MTS, the developer of SMaRT©, is an accredited American National Standards Institute (ANSI)standard developer.
• Knoll also partners with BIFMA (Business and Institutional Furniture Manufacturers Association) to promote level� sustainabilitystandards for the contract furniture industry.
• Knoll has established FSC� (Forest Stewardship Council) certified wood as the standard for general office open plan office systems,casegoods and tables.
• Knoll has launched Full Circle, a resource recovery program developed with ANEW, to help customers extend the life cycle of surplusfurniture, fixtures and equipment (FF&E) in an economically, socially and environmentally responsible manner.
• Our goal is to encourage all manufacturers in the contract furniture industry and related industries to adopt standards that will lead tosustainable products and practices.
For more information about Knoll and sustainable design, visit knoll.com/environment.
2
Introduction to Currents
Currents creates dynamic, advancedperformance work environments fromcoordinated, independent elements –Service Walls, Fence frames, plannabledesks, mobile storage – and existingKnoll office products.
Currents workspaces may bespine-supported or freestanding, orplanned in combination withconventional panel systems.
Currents
3
Introduction to Currents
Currents Service WallsCurrents Service Walls form thestructural core and primary path ofservices distribution for a cluster ofworkstations. Currents Service Wallsmay also create borders for teamworkspaces, conference areas, orcorridors. Service Walls are 5� thick,and are available in three heights:39� for seated visual access; 48� forseated privacy, the most versatileheight for open plan areas requiringsome overhead storage; and 64� forstanding privacy in executive orconference areas.
Service Walls are composed offrames and covers. Frames includestuds on 12� centers, base racewaywith levelling glides, crown andbase. Frames may be specified with1�H compact crown or 4�H standardcrown. All studs have brackets tosupport covers at 5�, 21�, 30�, 39�,48� and 64� above the floor. Crownand raceway covers, structural basecovers from 5� to 21� above the floor,and covers above 21� must bespecified separately.
Structural base covers enableperpendicular panels, worksurfacesupports, or outriggers to be attachedat any point. Structural base coversmay be painted steel, perforated, orupholstered.
Wall covers above 21� snap into wallframe brackets at 12� intervals, andare removable without tools. Coversmay be painted, upholstered,acoustical/tackable upholstered,cable tray, slat wall, or markersurface.
Currents Walls plan in anycombination of 48�, 60� or 72� widthscorresponding to the total length ofWall required. Add outriggers, T-endand L-end panels, or 90° or 120°post connections at each end ofService Wall spine. Straightconnectors are included with eachframe kit to join frames of the sameheight in a straight line. High-lowstraight connectors are availableseparately. Service Walls requireoutriggers or perpendicular systemspanels every 8�.
Power components are specifiedseparately. Knoll universal 2+2 or3+3 power components may beinstalled in the base of the Wall or atworksurface height. Base power railsaccept two duplex outlets on eachside of a panel at raceway height.Desk-height outlet modules accepttwo duplex outlets on each faceabove or below the worksurface. Oneor two modules (four duplex outletseach side) may be located in any 12�wide stud bay. Locate outlet modulesand related 12�W outlet coversbefore specifying widths of adjacentpanel covers.
The interior of the Wall between 21�and the crown offers unobstructed, 1�deep, lay-in cabling on each surface.Vertical wire management and excesscord capability is unobstructed21/2� x 10� between studs.
Service Walls with standard 4�Hcrown enable upmounted shelves,overhead storage cabinets, andcanopy lighting at any point on oneor both sides. Upholstered orframeless glass add-up panels fit intoa center channel anywhere along thecrown for 12�, 21� or 28� ofadditional enclosure.
Stackable add-up panels are alsoavailable in upholstered, marker orglazed surface. First up panels are12�, 21� or 28� high; next up stackingpanels are 16� high.
First up panels can be mounted onany 3� increment along Service Wallcrown, or correspond in width tolinkable screens.
Wall mounted componentsWorksurface supports, perpendicularlinkable screens, and systems panelsmay be connected to the CurrentsWall at any point. Mobile screens arealso available, in an upholsteredsurface.
Currents linkable screens, in glazed,upholstered or marker surface,define workstations and extend theService Wall horizon. Linkablescreens connect in L, T, X, Y and Vconfigurations and accept stackableadd-up panels. First up panels are16�, 25� or 32�H. Next up panels are16�H.
Currents worksurfaces are designedfor computer use as the primary workactivity. Deep corners are shaped forlarge monitors, and include widekeyboard/mouse areas. Straightworksurfaces feature softly curved orflat fronts. Extended cornersincorporate an adjacent work areaand a computer corner into a single,uninterrupted surface. Universalworksurfaces include a steel stiffenerfor high load capacity and cordmanagement.
Service Walls cantileverworksurfaces up to 24�D, or provideend support for any size worksurface.Support columns, independentC-legs, and floorstanding pedestalsare also available for worksurfacesupport. Cantilevers are adjustablein 1� increments for 24�-34�Hworksurface. End support bracketsand C-legs are fixed height for 28�Hworksurface, or adjust for 24�-34�worksurface height.
Service Wall standard height 4�Hcrowns can upmount open shelves,overhead storage, task and ambientlighting, and add-up panels.
Service Wall standard height 4�Hcrowns can upmount or downmountReuter overhead storage, openshelves, or Equity overhead at anypoint. Reuter storage and Equityoverheads can only be downmountedfrom Walls with 1�H compact crown.Brackets are available to downmountMorrison Options, Series 2 forMorrison, Dividends, Series forDividends or Equity overheadcabinets from 64�H Service Wallwith either compact or standardcrown.
Currents
4
Introduction to Currents
Currents DesksCurrents desks are freestandingfurniture elements optimized for thehigh-mobility, computer-based office.Currents corner desks and mobilepedestals can work together to formefficient, two-element workstations.
Currents desks areheight-adjustable. Pin-set versionhas range of 24� to 30�H in 1�increments. Handcrank version letsthe user adjust continuously from 24�to 34�H. Desks have C-legs for kneeclearance, and have interchangeablerear casters or glides for easymobility.
All desks include horizontal andvertical cable managers.
Desks are available in corner,extended corner, and curved-frontstraight shapes. Worksurface cornersare eased to make alignment ofmobile units less critical.
Desks and wall-mountedworksurfaces accept clamp-onworkshelves. Workshelves provideconvenient binder/book accessadjacent to computer displays.
Currents WorktablesCurrents mobile worktables extendthe worksurface area and provideflexible guest/conference spaces.Rounded corners enable informalplacement near other worksurfaces.All worktables are available withcasters or levelling glides.
Adjustable height worktables adjustfrom 24� to 30� high in 1�increments.
Currents StorageCurrents freestanding storagecomponents are designed formobility and space efficiency.
Pedestals are available mobile orfixed, with 2 files or combination 4�personal, 7� data, and 11� file drawerfronts, fitting below standard 28�worksurface height. Data/file mobilepedestals are low enough to rollunder desks set lower than 28�.Mobile pedestals include top, castersand handle. Fixed pedestals include2� levelling glides.
Reuter vertical storage has a rotatingdoor, shelves and pull-out fileframes, and a wardrobe area. Reuterstorage is 21� wide so open door fitswithin 24� planning footprint.
Reuter vertical storage is available48�H, with painted or worksurfacetop, or 64�H with painted top only.
Currents
5
Currents TextilesKnollTextiles
Approved for Wall covers,mobile screens andprivacy screens
Fabric Group 10Annex (W1360)Beacon (W1597)Broadcloth II (W1619)Circuit (W1754)Element (W1077)Foundation (W351)Messa (W20611)Pivot (W1926)Symbolic Details (W693)Skylark (W1718)Tailor Made II (W1610)Twister (W1923)Versatility (W432)
Fabric Group 20Bauhaus Block (W296A)Circle Line (W1146)Criss Cross (W305)Delite (K2026)Edo (W2111)Logic (W1318)Mainframe (W1783)Nematic II (W1620)Photon II (W1695)Reflect (W884)
Fabric Group 30Flow (W565)Match Point (W1145)Micro (W465)Relay (W1020)*
Fabric Group 40Amplify (W1215)Bandwidth (W1219)Crossroad (K2085)Hourglass (K1523)Ornament (W1078)Palladium (W1030)Spellbound (W1464)
Fabric Group 50Presto (K1000)
Fabric Group 55Ransom (K1298)Ransom (K2398)
* Screen only
Additional textiles areavailable on linkable screensand stackable add-uppanels: see Morrison pricelist for approved fabrics.
Customer’s Own Material issubject to an applicationtesting fee of $750 per fabricand a $2500 fee for ULtesting. Fabric requirements- application test, 10 yards;UL test, 15 yards. COM isalso subject to extendedleadtimes. COM panels arepriced at Group 10 plus costof fabric.
Approved textiles forCurrents Mobile PedestalCushions
Abacus fAegeanAlignment fAmoreArgyleArno fAswanAtelierAtlasAxiomBackdropBank Shot fBaxterBeaconBelizeBiota fBiscayneBistro fBocce fBoundary fCairoCameoCatoCats Cradle fCenturyChanceCharmChroma fChronicle fCircaClassic Boucle fClose KnitCocoCommon Ground fCommuter Cloth fCompass CRCornaroCoterieCrossroadCuddle StripeDahlia CRDeliteDemureDjenneDivaDovetail fDristi
DuneDurandDynamicEarthwork fEclat WeaveEmpire StripeEntouragefEssenceFable CRFerryFibraFireflyForzaFox Trot CRFramework fGalla II fGibsonGliderGrandeGrandviewGreenwichHazeHeavy MetalHeliosHighlandHolbrookHologramHourglassHudsonIconIkat SquareIkat StripeInnuendoIntrigueIslandJasmineJourneyfKampalaKatazomeKeatonKimonoKinabaluKingstonKnoll Felt fKnoll Hopsack fKora CRLagosLegend CRLibertyLimaniLore CRLudlowLyricMagnoliaMambaMarinerMarqueeMasqueradeMelangeMelodyMenagerieMeroeMetroMidpointMilestoneMini Stitch fMod PlaidMonarch f
Moto CRNature WalkNight LifeNobleObiOriginsPalisadePanache CRParadigmPedal PusherPetite FloralPogo fPrairiePrepfPresto fPrim fQuarkRadianceRansom fRattanReflectRegard CRRicochet fRioRivingtonRoamRoundtripfRush HourSahara CRSandpiper CRSequin CRSerendipityShermanSinclairSmartSoireefSoliloquySonnet fSoonSpark fSpectator fSpencerSpree fStacksStar StruckStepping StonesStriae StripeSummitSuttonfSwingSynth fTabloid fTheoryTight RopeTildenTingeTiuoliTopographyTotemTower GridTreble CRTrophyTrystTweed FriezeUltrasuede fUtmostUtrilloVatera
VenueVersa fVersatilityVibeVinylWestwoodWhipWide Angle fWitWoodlandYeniZari CRZipline fZoom
Pedestal cushions areupholstered (from the front tothe back of the pedestal)with the fabric directionmatching the textile sample.
Approved SpinneybeckLeathers for CurrentsMobile Pedestal Cushions
AlaskaAmazonAndesArizonaCervoCopenhagenCordovanDerbyDistressedDucaleDucale VeloursEspanaMaremmaMarissaPrimaRivaSabrinaSaddleSalonVelluto PelleVolo
f = CAL 133 Pre-approved
* Textile and leather gradesare found in the OfficeSeating Textile Matrix andOffice Seating LeatherMatrix.
Currents
6
Currents Color ProgramCurrents Finishes
Core finishes
Specify Core finishes for all new customers
Core LegacyWall
covers
Wallends,trim,
bracketsand
outrig-gers
Storagefronts
Storagecases
Work-surfaces
andshelves
Currentsworksur-
faceedges
Currentsfor
Morrisonworksur-
faceedges
Pedestalsand
ReuterOver-head
611 Beige Mist Metallic • • • • P2
118 Bright White • • • • • • P3
112 Brown • • • • P1
123 Brushed Grey •122 Brushed Sand •113 Dark Grey Y3 • • • • P1
128 Fog • •114 Folkstone Grey LA/U • • • • • • P1
111 Jet Black • • • • • • P1
124 Medium Cherry •115 Medium Grey Y2 • • • • P1
612 Medium Metallic Grey J • • • • P2
121 Micro Grey •129 Micro Sand •126 Natural Cherry •125 Natural Maple •119 Pumice F • •116 Sandstone • • • • P1
613 Silver 3 • • • • P3
117 Soft Grey E/M42 • • • • • • P1
813 Trim Grey 5 • •127 Walnut •V1 Maple Techgrain� 4/M 638 638 638
V1 Cherry Techgrain� 6/R 639 639 639
V2 Maple K 006 006 006
Default trim information:Trim Grey is the integral color for worksurface, desk and worktable top edge, mobile screens, linkable screen and add-up panel trim, privacy screen and windowtrim, pedestal pulls.Black: wall frames and drawers interior, wall, screen, storage glides and casters.Light grey: Ambient lightsTranslucent crystal: fiberglass surfaces for mobile screens, linkable screens and add-up panelsThe new Core finish 113 Dark Grey is not a match to the Currents Legacy finish NV. It is a match to the Dividends Legacy finish Y3.The new Core finish 115 Medium Grey is not a match to the Currents Legacy finish NJ. It is a match to the Dividends Legacy finish Y2.
Veneer finishes for Currents worksurfaces and storage fronts are available through Custom Product Development.
Wood FinishesNew codes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill optionsand gloss levels.
Gloss Level Fill LevelA Low Gloss Closed PoreB MediumGloss Closed PoreC High Gloss Closed Pore
D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore
Edge Options for VeneersWOOD ComplemetarySYN Wood Complementary SyntheticWPLY Wood Ply Edge *SPLY Synthetic Ply Edge *
* Ply Edge available on Birch (037) worksurfaces.
Currents
7
Currents Legacy Finishes
Work-surfaces
Wall andStructural
Basecovers
CrownCovers
Crown end caps,connectors and
connector top caps,raceway covers,
worksurfacebrackets and
outriggers
Straight legs, C-legs, corner
legs, desk screenclamps,
window frames(textured only)
Storagefronts
StorageCases
Plastic Laminates Light Grey L
Pumice F
Winter grey V
Slate S
Snow B
Folkstone Grey U
Pearwood PA
Fiber E
Sand D
Medium Grey G
Soft grey M42
Wood GrainLaminates
Clear Maple CM
Veneer Group 3 Maple K K
American cherry X X
Medium red mahogany Z Z
Paint Group 2 Metallic Flint * 2 2 2 2 2 2
Light metallic grey * U U U U U U
Medium metallic grey * J J J J J J
Dark metallic grey * V V V V V V
Light metallic tan * W W W W W W
Metallic beige * H H H H H H
Soft Grey * E E E
Medium Grey (Slate) * Y2 Y2 Y2
Taupe * R R R
Aluminum A
Paint Group 3 Silver * 3 3 3 3 3 3
White * B B B B B B
Specify legacy finishes to match existing product only. Legacy finishes are not available for new customers.
Trim grey is the integral color for worksurface, desk and worktable top edge, mobile screen and add-up panel trim, privacy screen and window trim, pedestal pullsWall, screen and storage glides, glide cones and casters are integral color Black.Wall frames and pedestal drawer interiors are painted Black.Ambient lights are painted Light greyFiberglass surfaces for mobile screens, linkable screens and add-up panels is Translucent crystalLinkable screen feet are painted Trim grey
Note: Add 10% to the list price of any laminate product when specifying a legacy laminate.
Currents
8
Introduction to Upstart
Knoll Upstart is a collection of tables, screensand services distribution components forcomputer-intensive, active, and open workenvironments.
Upstart plans as single-surface, L- or U-shapeworkstations, or freestanding worktables incombination with other systems furniture. Tablesare available on casters or glides and areadjustable in height.
Original Upstart tops have a plastic laminatesurface with a continuous T-mold edge. Thecorners of Original Upstart tops are rounded.Original Upstart legs are curved.
New Plannable Upstart tops have a plasticlaminate or Veneer surface with a T-mold edge onthe front and a thin edgeband on the sides andback. The corners of Plannable Upstart tops are90 degrees and allow two tables to meet at rightangles. Plannable Upstart legs are straight.
Complementary products include Currentsworkshelves, which clamp on to Upstart tables,mobile screens, linkable screens and ServiceWall, monitor supports and desktop accessories.Consult the Currents and KnollExtra price listsfor product details and pricing.
ScreensUpstart screens mount to the back edge ofOriginal Upstart tables to provide seated visualprivacy at a horizon of 39 or 48 inches. UpstartScreens are available in translucent or markersurface, and may be combined with magnet rail.
Plannable Upstart tables use Morrison Networkupholstered screens, which are available in avariety of sizes.
Accessories
Flat BracketBracket joins 2-legged table to another Upstarttable at same height.
Cable TrayCable tray adds on to worksurface stiffener tocontrol cable bundles and power strips (wherepermitted by code).
Important Note: Plannable Upstart straightlegs may not be used with Original Upstarttops due to stability issues.
Note to Knoll Dealer Sellers:
The products contained in this price list are alsoavailable through the Knoll Essentials program,with limited exceptions. For additionalinformation, please contact your customer servicerepresentative or visit Knoll Exchange.
Primary and Secondary Worksurfaces
Original Upstart
Rectangular table desk/Return
Corner table desk, 120°
Extended Corner table desk
Y-shape table desk, M-shape table desk
Conference Worksurfaces
Original Upstart
Round, Half round table desk
Oval table desk
Wiper table desk, Tripod table
48 x 24 Original Upstart
221/4�
48�
New Plannable Upstart
Rectangular table desk/Return
Corner table desk, 90°
Extended Corner table desk
P-shape table desk
New Plannable Upstart
Half round table desk
48 x 24 Plannable Upstart
235/8�
48�
Upstart
9
Original Upstart Planning Examples
Basic stand-alone Y desk
• the core Upstart application• 30� x 72� nominal shown;
conference depth isapproximately 36�
Y desk with 42� round table
• conference table
Y desk with tripod table
• 30� x 72� Y desk, work shelf,and mobile pedestal
Dual-monitor M desk with tripod table
• 30� x 72� nominal M desk
Oval table with Y desk
• 36� x 66� oval table• 30� x 72� Y return
Rectangular table withbracketed return surface
• 72� x 76� approximatefootprint
• optional work shelf
Dual-monitor M deskworkstation
• 72� x 100� approximatefootprint
• optional work shelf• flat ends allow placement
along wall
Curved wiper with Y desk
• wiper 66� W• 30� x 72� Y return
Y and M back-to-back, with42� conference tables
Y desks back-to-back, withhalf-round shared table
• please note 1.75� setbackfrom the back edge ofeach top to module line,same as Currents desks.
Upstart
10
Original Upstart Planning Examples
Y desk with Upstart storage• 72� x 96� footprint• 72� table with screen• mobile pedestal and tower
Extended corner desk and adjacent worktable• 72� x 96� footprint• 72� x 48� corner and 48� straight desks• mobile pedestal and privacy screen
U-shape plannable desks• 96� x 96� footprint• two 48� x 72� extended corners• mobile pedestal and tower• 72� privacy screen
Extended corner desk and tower• 72� x 72� footprint• 48� and 72� screens• mobile pedestal and tower
Upstart 120� planning• group of three 120° corners• 48� shared privacy screens• mobile pedestals
Upstart work group• 120° corners and shared worktable 48 x 24�• mobile pedestals and towers• 48� privacy screens
Upstart
11
Upstart Color ProgramUpstart Finishes
Core finishes
Specify Core finishes for all new customers
Core Legacy
Table legs,screen
brackets,magnet rail
UpstartWorksurfaces
PlannableUpstart
Worksurfaces
UpstartWorksurface
edges
PlannableUpstart
Worksurfaceedges
611 Beige Mist Metallic •118 Bright White • • • • •112 Brown •123 Brushed Grey • •122 Brushed Sand • •113 Dark Grey Y3 •128 Fog • • • •114 Folkstone Grey LA/U • • • • •111 Jet Black • • • • •124 Medium Cherry • •115 Medium Grey Y2 •612 Medium Metallic Grey J •121 Micro Grey • •129 Micro Sand • •126 Natural Cherry • •125 Natural Maple • •119 Pumice F • • • •116 Sandstone •613 Silver 3 •117 Soft Grey E/M42 • • • • •813 Trim grey 5 • •127 Walnut • •
Translucent orange O •Translucent blue P •Frosty white W •Light grey (integral) U
Glider grey (integral) G1
638 Blond Maple 4/M •639 Light Cherry 6/R •006 Maple K
Default trim information:Trim Grey is the integral color for caster and glide leg levellers and screen cornersBlack: flat bracket, cable tray and castersScreen available in Ribbed Polycarbonate or Marker surface
Veneer finishes for Plannable Upstart worksurfaces are available through Custom Product Development.
For Plannable Upstart Veneer Group 1, only black or trim grey edgebands can be specified.Translucent orange, Translucent blue, and Frosty white edgebands are not available for Plannable Upstart tables.
Wood FinishesNew codes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill optionsand gloss levels.
Gloss Level Fill LevelA Low Gloss Closed PoreB MediumGloss Closed PoreC High Gloss Closed Pore
D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore
Edge Options for VeneersWOOD ComplimetarySYN Wood Complimentary SyntheticWPLY Wood Ply Edge *SPLY Synthetic Ply Edge *
* Ply Edge available on Brich (037) worksurfaces.
Upstart
12
Upstart Legacy Finishes
Specify Legacy Finishes for existing customers only. Legacy Finishes are not available for new customers.
Table legs, screen brackets,magnet rail Worksurfaces Worksurface edges
B Snow •L Light grey • •E Fiber •V Winter grey •S Slate •F Pumice • •U Folkstone grey • •
M42 Soft grey • •D Sand • •
CM Clear Maple •PA Pearwood •
WM Warm Cherry •5 Trim grey •N Black •O Translucent orange •P Translucent blue •W Frosty white •N2 Flint
NU Light grey
NJ Medium grey
NV Dark grey
NW Light Tan
NH Beige
3 Silver •B White •2 Metallic flint •U Light metallic grey •J Medium metallic grey •V Dark metallic grey •H Metallic beige •W Light metallic tan •E Soft grey •K Maple
U Light grey (integral)
G1 Glider grey (integral)
Default trim information:Trim Grey is the integral color for caster and glide leg levellers and screen cornersBlack: flat bracket, cable tray and castersScreen available in Ribbed Polycarbonate or Marker surface
For Plannable Upstart Veneer Group 1, only black or trim grey edgebands can be specified.Translucent orange, Translucent blue, and Frosty white edgebands are not available for Plannable Upstart tables.
NOTE: Add 10% to the list price of any laminate product when specifying a legacy laminate.
Upstart
13
Service Wall frames
description type w d h pattern no. black
Wall frame, standard crown 39�H 48� 5� 43� APF1 3948 $603.60� 5� 43� APF1 3960 693.72� 5� 43� APF1 3972 858.
48�H 48� 5� 52� APF1 4848 663.60� 5� 52� APF1 4860 759.72� 5� 52� APF1 4872 946.
64�H 48� 5� 68� APF1 6448 788.60� 5� 68� APF1 6460 902.72� 5� 68� APF1 6472 1,129.
Wall frame, compact crown 39�H 48� 5� 40� APFA1 3948 483.60� 5� 40� APFA1 3960 554.72� 5� 40� APFA1 3972 683.
48�H 48� 5� 49� APFA1 4848 529.60� 5� 49� APFA1 4860 606.72� 5� 49� APFA1 4872 757.
64�H 48� 5� 65� APFA1 6448 630.60� 5� 65� APFA1 6460 720.72� 5� 65� APFA1 6472 902.
Order Code
Example: APF1 4860
APF1 Wall frame48 Height60 Width
Specification Information
Wall frame pattern numbers beginwith APF prefix.
Specify:Fifth position: height39 39�H48 48�H64 64�H
Seventh position: width48 48�W60 60�W72 72�W
All wall frames include two 3�diameter, 2� levelling glides and oneset of connectors to adjacent frameor wall connector. Frames are blackpainted finish.
Application Notes
Service Wall frames are thestructural component of a Currentsspine. Specify frames in anycombination of widths to create theoverall wall length required.
Frames include vertical studs every12� on center, with cover mountingclips and cable manager inserts onboth sides. Frames also include 4�Hor 1� top crown with continuouschannel for add-up panels. 4�HStandard crown frames includeshaped crowns for upmountingshelves and overhead storagecabinets or canopy lighting at anypoint. Compact crown framesfeature a slim profile crown withdownmounting capability only.
Crown is bored to accept stackableadd-up panels at 3� increments.
Wall frames include two levellingfeet with 2� travel, 12� from eachside edge.
The base of the wall accepts Knoll 2+ 2 or 3 + 3 raceway power rails,and allows cables to enter or exitanywhere between glides.
Specify crown covers, racewaycovers, structural base covers, andwall covers for each face of frame,and specify power componentsseparately.
Currents
14
Fence frames
description width depth height pattern number black
Fence frames (legs not included) 48� 5� 201/2� APF 1848 $551.60� 5� 201/2� APF 1860 661.72� 5� 201/2� APF 1872 793.
Leg with glide 23/4� 4� 5� AX1LEG5 ( ) 85.23/4� 4� 6� AX1LEG6 ( ) 85.23/4� 4� 181/2� AX1LEG ( ) 85.
Stabilizer feet (set of 2) 21/2� 71/2� 41/2� AX1 FF ( ) 132.
Order Code
Example: APF 1872
APF Wall frame18 Height72 Width
Specification Information
Specify painted finishes for legs andfeet.
Fence frames include four barrelconnectors, crown and bottom railcovers in trim grey. Frames must beenclosed with two rows of 9�HCurrents or AutoStrada wall coverson each face.
Specify Currents power componentsseparately. Outlet modules mount atany point along the top row only.
Cable tray access covers mount inbottom row only.
Application Notes
Currents Fence providesindependent services distribution toa cluster of tables, desks orworkstations.
Fence legs may be specified at threeheights to deliver an overall heightof 40�H, 28�H or 27�H to the top ofthe crown. Specify AX1LEG( ) leg toget to 40�H; specify AX1LEG6( )leg to get to 28�H; and specifyAX1LEG5( ) leg to get to 27�H tothe top of the crown.
Installed Fence frames includevertical studs with cover mountingclips and cable manager insertsevery 12�.
A continuous top channel acceptsCurrents or AutoStrada crown topcaps and supports frameless glassadd up panels, add up panels orstackable add up panels 12� high.21�H stackable add up panels maybe used on Fence runs supported byperpendicular panels or linkablescreens.
Fence legs with glides mount 12�from each frame side edge under thefirst full vertical stud. Stabilizer feetmount on both faces of Fence legs.For freestanding Fence runs, specifya leg with feet 12� from each runend plus a leg with feet for eachintermediate frame connection.Intermediate legs may be positionedon either side of the frameconnection.
Legs with feet 12� from each end ofconnected Fence frames can bereplaced by stabilizer end cabinetsor T-ends with panels or linkablescreens. Intermediate support mayalso be provided by legs without feetin combination with perpendicularpanels or linkable screens withFence panel starters.
Fence frames can end supportworksurfaces but cannot cantileverworksurfaces or upmounted storage.
When specifying frameless glassadd-up panels on Fence, eachFence frame requires two legs.
Fence T-end adaptors, stabilizer endcabinet adaptors, high-low straightconnectors, panel starters forMorrison panels and linkablescreens, unversal panel starters, andpanel starter end trim for Morrisonpanels and linkable screens are onlycompatible with Fence frames thatare specified at 40 inch high withthe 18-1/2� high leg (AX1 LEG). Touse these components when Fenceis planned with shorter legs thatdeliver overall heights of 27 or 28inches high, please contact KnollCustom Product Development forassistance.
Currents
15
Ser
vice
Wal
lsan
dco
mpo
nent
s
Crown and raceway covers
description type w d h pattern no. paint metal finish (A) list
Crown covers (pair) 48� 5� 4� APT 48 ( ) $42. $50.60� 5� 4� APT 60 ( ) 50. 57.72� 5� 4� APT 72 ( ) 57. 71.
Crown covers, compact (pair)integral color
48� 5� 1� APTA 48 ( ) 68.60� 5� 1� APTA 60 ( ) 80.72� 5� 1� APTA 72 ( ) 137.
Raceway covers (pair) no outlets 48� – 31/3� APR 480 ( ) 42.60� – 31/3� APR 600 ( ) 50.72� – 31/3� APR 720 ( ) 57.
outlets 48� – 31/3� APR 48 ( )( ) 50.60� – 31/3� APR 60 ( )( ) 57.72� – 31/3� APR 72 ( )( ) 71.
Crown top cap 24� 2� – APT C24 ( ) 9.24� 2� – APT1 C24 ( ) 9.36� 2� – APT C36 ( ) 19.36� 2� – APT1 C36 ( ) 19.48� 2� – APT C48 ( ) 32.48� 2� – APT1 C48 ( ) 32.60� 2� – APT C60 ( ) 35.60� 2� – APT1 C60 ( ) 35.72� 2� – APT C72 ( ) 42.72� 2� – APT1 C72 ( ) 42.
integral color only, plastic
Order Code
Example: APR 480 612
APR Raceway48 Width0 Outlet openings612 Finish
Specification Information
Wall crown pattern numbers beginwith APT-prefix, then frame width.
Specify:Sixth position: paint or metal finish
Raceway Covers begin with APR-prefix, then frame width.
Specify:Sixth position: outlet openings0 no outlets2 two outlets, each side (48�,
60� only)4 four outlets, each side6 six outlets (72�only), each
side
Seventh position:Raceway cover finish
Specify trim grey or easy greyintegral color for compact crowncovers and crown top cap.
Crown top caps are optional fillersfor the crown where no add-uppanels are planned.
Crown top caps with prefix APT1are slightly taller than crown topcaps with prefix APT to better lineup with frameless glass add-uppanels.
Application Notes
Crown, raceway, and structural basecovers are required for every wallframe in corresponding widths.Covers are specified in pairs tocover both sides of a frame.
Raceway covers may be specifiedwith no openings (desk-heightraceway), two openings in thecenter, or four outlets at all possiblelocations in 48� or 60�W raceway.72�W raceway may have four outletopenings in the center or six in all,each side.
Raceway cover sets with outletopenings include black filler platesfor one cover only.
Currents
16
Structural base cover kitsnon-upholstered
description type w d h pattern no.smooth
solidtextured
solid perforatedtextured
perforated
Structural base covers (pair) non upholstered 48� 1� 16� APC AZ48 ( )( ) $286. $317. $407. $446.60� 1� 16� APC AZ60 ( )( ) 329. 366. 464. 515.72� 1� 16� APC AZ72 ( )( ) 374. 413. 525. 578.
Order Code
Example: APC AZ48 H 612
APC Wall coverAZ Attachment zone48 WidthH Perforated612 Finish
Specification Information
Structural base cover kit patternnumbers begin with APC AZ prefix,then cover width.
Specify:Eighth position:P paintedPT textured paintedH perforated paintedHT textured perforated painted
Ninth position: paint finish or fabricgroup
Specify paint finish for all covers.
Textured paint finishes for structuralbase covers only.
Application Notes
Crown, raceway, and structural basecovers are required for every wallframe in corresponding widths.Covers are specified in pairs tocover both sides of a frame.
Structural base covers bolt to eachside of the wall frame up to 21�H forstructure and continuousattachment capability.
Currents
17
Ser
vice
Wal
lsan
dco
mpo
nent
s
Structural base cover kitsupholstered
description type w d h pattern no. 10 15 20 30 35 40 45 50 55
Structural base covers (pair) upholstered 48� 1� 16� APC AZ48 F ( ) $411. $428. $442. $472. $485. $502. $517. $543. $576.60� 1� 16� APC AZ60 F ( ) 485. 502. 519. 554. 574. 587. 608. 637. 678.72� 1� 16� APC AZ72 F ( ) n/a 576. n/a n/a n/a n/a n/a n/a n/a
Order Code
Example: APC AZ48 F 10
APC Wall coverAZ Attachment zone48 WidthF Upholstered10 Fabric
Specification Information
Structural base cover kit patternnumbers begin with APC AZ prefix,then cover width.
Specify:Eighth position:F fabric
Ninth position: paint finish or fabricgroup
Fabric groups:Specify two-digit fabric groupnumber
Application Notes
Crown, raceway, and structural basecovers are required for every wallframe in corresponding widths.Covers are specified in pairs tocover both sides of a frame.
Structural base covers bolt to eachside of the wall frame up to 21�H forstructure and continuousattachment capability.
When ordering 60� wide or greaterwidth upholstered structural basecovers, please check the width ofthe fabric selected.
Currents
18
Access coversoutlets cover
description type w d h pattern no. black no finish smooth
Outlets cover 9�H cover 12� 1� 9� APC OC ( ) $35.
Hinged outlet flap (each) APC OCF 35.
Outlet fillers (Set of 10) AR OF 40.
Hardwire outlets cover 12� 9� APC HOC ( ) 55.
Hardwire outlet box, desk height quad 2� AR1 HOB 246.two quad 12� AR1 HOB2 324.
Order Code
Example: APC OC 612
APC Service wall coverOC Outlets cover612 Finish
Specification Information
Specify finish.
Application Notes
Locate outlets covers on ServiceWall or Fence frames beforespecifying other wall covers.
Outlets cover mounts between 21�and 30� (below standard deskheight), 30� - 39� (above deskheight) or 39� - 48� on Service Wallframe. Outlet cover mounts in toprow of Fence only.
Outlets cover is 12� wide, andmounts anywhere on Service Wallframe between 21� and 48� abovethe floor. Outlets cover correspondsto power components (specifiedseparately) mounted on Service Wallframe.
Outlets covers have four openingsfor power or PDC outlets. Specifyoutlet fillers for unused outletopenings in cover. Specify hingedoutlet flap to conceal power or dataoutlet plugs. Each flap covers twoopenings; two flaps conceal all fouropenings in outlets cover.
For hardwire power applications(required in City of Chicago) specifyhardwire outlets cover and hardwireoutlets box. Do not specify cabletray covers at same level ashardwire power.
Hardwire outlet box accepts twoDecora-style duplex outlets, andincludes mounting brackets for oneface of Service Wall between 21�and 48�H or one face of top row ofFence frames. Two quad hardwireoutlet box accepts four duplexoutlets on one face. Also specifyhardwire outlets cover, which hasfour outlet openings. Specify outletfillers for any unused outletopenings.
Outlet boxes include openings topermit continuous lay-in wiring withWiremold� raceway. Electricalcontractor supplies infeed cable,Wiremold 2400�, and duplexoutlets. Outlet boxes can be plannedback to back, with distribution onone side of Service Wall.
NOTE: Currents cable tray accesscovers and all AutoStrada accesscovers cannot be used in the same9�H zone as the wiremold racewayas the wiremold will not fit behindthe covers.
Currents
19
Ser
vice
Wal
lsan
dco
mpo
nent
s
Access coverscable tray and slat wall covers
description w d h pattern no. smooth
9�H cable tray covers 12� 1� 9� APC 0912 C ( ) $83.24� 1� 9� APC 0924 C ( ) 99.36� 1� 9� APC 0936 C ( ) 115.48� 1� 9� APC 0948 C ( ) 150.60� 1� 9� APC 0960 C ( ) 192.72� 1� 9� APC 0972 C ( ) 234.
9�H cable tray exit cover 12� 1� 9� APC 0912 CX ( ) 167.
9�H slat wall covers 12� 1� 9� APC 0912 S ( ) 75.24� 1� 9� APC 0924 S ( ) 86.36� 1� 9� APC 0936 S ( ) 100.48� 1� 9� APC 0948 S ( ) 133.60� 1� 9� APC 0960 S ( ) 167.72� 1� 9� APC 0972 S ( ) 202.
Order Code
Example: APC 0948 C 612
APC Service wall cover09 Height48 WidthC Surface type612 Finish
Specification Information
Specify finish.
Application Notes
Cable tray and slat wall coversprovide integral performancesurface on one or both sides of aService Wall or Fence frame. Cabletray and slat wall may be planned incombination with other painted orupholstered covers to encloseframes between 21�H and 48�H.
Cable tray mounts from 21� - 30�only on any Service Wall frame.Adjacent trays form continuous,easily accessible cable managementat worksurface or table height.Shorter segments provide localcable management below outletmodules. Covers may span across astraight wall frame connection.
Bottom half of cable tray coverpermits cables to be managed onsurface of studs with one cableholder (55 CAT5 cables) or two clips(28 cables).
Cable tray exit cover permits powerjumpers and data/communicationcables to pass from wall to Currentsdesk service beam. Cable tray exitcover, 12�W only, has two openingswith sliding covers.
Slat wall supports KnollExtra tasklights, monitor arms, paper trays,file holders and other accessories.
Slat wall covers will support flatpanel monitor arms with varyingweight limitations based onmounting and application. Pleaserefer to the KnollExtra price list forcomprehensive mounting andweight limitation information byapplication.
Currents
20
Access coversmarker surface and painted steel covers
description type w d h pattern no. M smooth textured
9�H Marker surface covers 24� 1 9� APC 0924 M $48.36� 1 9� APC 0936 M 58.48� 1 9� APC 0948 M 68.60� 1 9� APC 0960 M 76.72� 1 9� APC 0972 M 82.
16�H Marker surface covers 48� 1 16� APC 1648 M 97.60� 1 16� APC 1660 M 115.72� 1 16� APC 1672 M 133.
9�H Painted steel covers smooth 12� 1� 9� APC 0912 P ( ) 38.24� 1� 9� APC 0924 P ( ) 45.36� 1� 9� APC 0936 P ( ) 49.48� 1� 9� APC 0948 P ( ) 62.60� 1� 9� APC 0960 P ( ) 69.72� 1� 9� APC 0972 P ( ) 78.
textured 12� 1� 9� APC 0912 PT ( ) 40.24� 1� 9� APC 0924 PT ( ) 48.36� 1� 9� APC 0936 PT ( ) 58.48� 1� 9� APC 0948 PT ( ) 68.60� 1� 9� APC 0960 PT ( ) 76.72� 1� 9� APC 0972 PT ( ) 82.
Order Code
Example: APC 0948 P 117
APC Service wall cover09 Height48 WidthP Surface type117 Finish
Specification Information
9�H covers plan at any 9�H level in39�, 48�, or 64� Service Walls orFence Frames.
For active face of 39�H Service Wallframe, specify two 9�H covers eachside.
For active face of 48�H Service Wallframe, specify three 9�H coverseach side.
For active face of 64�H Service Wallframe, specify three 9�H covers andone 16�H cover each side.
For active face of Fence frames,specify two 9� covers each side.
Surface type:P PaintedPT Textured paintedM Marker
Specify smooth or textured paintedfinish for steel covers.
Application Notes
Marker surface covers are steel witha bright white dry-erase markerfinish.
Painted steel covers provide adurable wall-like surface in smoothor textured finish.
Service Wall covers enclose framesbetween 21�H and the top crown.Covers may be specified in anycombination of widthscorresponding to the total ServiceWall length. Covers may span acrossa straight wall frame connection.
For active surfaces with accessto cables andpower/data/communications outlets,specify 9� and 16�H segmentedcovers as described in SpecificationInformation. Normally, 9� coverfrom 21� to 30� above floor is cabletray or painted steel, and highercovers are painted, marker,upholstered, tackable, or slat wallsurfaces.
Currents
21
Ser
vice
Wal
lsan
dco
mpo
nent
s
Access coversmarker surface and painted steel covers
description type w d h pattern no. M smooth textured
16�H Painted steel covers smooth 48� 1� 16� APC 1648 P ( ) $89.60� 1� 16� APC 1660 P ( ) 107.72� 1� 16� APC 1672 P ( ) 119.
textured 48� 1� 16� APC 1648 PT ( ) 97.60� 1� 16� APC 1660 PT ( ) 115.72� 1� 16� APC 1672 PT ( ) 133.
Order Code
Example: APC 0948 P 117
APC Service wall cover09 Height48 WidthP Surface type117 Finish
Specification Information
9�H covers plan at any 9�H level in39�, 48�, or 64� Service Walls orFence Frames.
For active face of 39�H Service Wallframe, specify two 9�H covers eachside.
For active face of 48�H Service Wallframe, specify three 9�H coverseach side.
For active face of 64�H Service Wallframe, specify three 9�H covers andone 16�H cover each side.
For active face of Fence frames,specify two 9� covers each side.
Surface type:P PaintedPT Textured paintedM Marker
Specify smooth or textured paintedfinish for steel covers.
Application Notes
Marker surface covers are steel witha bright white dry-erase markerfinish.
Painted steel covers provide adurable wall-like surface in smoothor textured finish.
Service Wall covers enclose framesbetween 21�H and the top crown.Covers may be specified in anycombination of widthscorresponding to the total ServiceWall length. Covers may span acrossa straight wall frame connection.
For active surfaces with accessto cables andpower/data/communications outlets,specify 9� and 16�H segmentedcovers as described in SpecificationInformation. Normally, 9� coverfrom 21� to 30� above floor is cabletray or painted steel, and highercovers are painted, marker,upholstered, tackable, or slat wallsurfaces.
Currents
22
Access coversupholstered
description w d h pattern no. 10 15 20 30 40 45 50 55
9�H Wall covers 12� 1� 9� APC 0912 F ( ) $74. $74. $78. $81. $82. $83. $86. $92.24� 1� 9� APC 0924 F ( ) 90. 92. 95. 99. 104. 108. 114. 120.36� 1� 9� APC 0936 F ( ) 108. 113. 114. 121. 132. 135. 140. 151.48� 1� 9� APC 0948 F ( ) 119. 121. 129. 140. 149. 153. 161. 170.60� 1� 9� APC 0960 F ( ) 141. 149. 154. 168. 179. 189. 197. 206.72� 1� 9� APC 0972 F ( ) n/a 169. n/a n/a n/a n/a n/a n/a
16�H Wall covers 36� 1� 16� APC 1636 F ( ) 161. 168. 171. 183. 197. 202. 208. 221.48� 1� 16� APC 1648 F ( ) 175. 189. 196. 208. 221. 233. 242. 256.60� 1� 16� APC 1660 F ( ) 212. 221. 235. 250. 267. 277. 292. 313.72� 1� 16� APC 1672 F ( ) n/a 251. n/a n/a n/a n/a n/a n/a
Order Code
Example: APC 0948 F15
APC Service wall cover09 Height48 WidthF Surface type15 Fabric group
Specification Information
For active face of 39�H Service Wallframe, specify two 9�H covers.
For active face of 48�H Service Wallframe, specify three 9�H covers.
For active face of 64�H Service Wallframe, specify three 9�H covers andone 16�H cover.
For full fabric surface between 5�and 21�, order upholsteredstructural base cover.
For active face of Fence frames,specify two 9� covers each side.
Surface type:F Upholstered
Specify fabric group:10 Fabric group 1015 Fabric group 1520 Fabric group 2030 Fabric group 3040 Fabric group 4050 Fabric group 5055 Fabric group 55
Application Notes
Upholstered Service Wall coversenclose frame between 21� and thetop crown.
Specify widths corresponding towall frame width, or in any 12�increment to accommodate 12�Woutlets covers or slat wall covers.Covers may span across a straightwall frame connection.
For active surfaces with access tocables andpower/data/communications outlets,specify 9� and 16�H segmentedcovers as described in SpecificationInformation. Normally, 9� coverfrom 21� to 30� above floor is cabletray or painted steel, and highercovers are painted, marker,upholstered, tackable, or slat wallsurfaces.
When ordering 60� or wider covers,please check width of fabricspecified.
Currents
23
Ser
vice
Wal
lsan
dco
mpo
nent
s
Access coverstackable upholstered
description w d h pattern no. 10 15 20 30 40 45 50 55
9�H Wall covers 12� 1� 9� APC 0912 A ( ) $141. $147. $150. $159. $170. $173. $180. $196.24� 1� 9� APC 0924 A ( ) 141. 147. 150. 159. 170. 173. 180. 196.36� 1� 9� APC 0936 A ( ) 141. 147. 150. 159. 170. 173. 180. 196.48� 1� 9� APC 0948 A ( ) 153. 162. 168. 179. 193. 199. 209. 222.60� 1� 9� APC 0960 A ( ) 182. 193. 202. 215. 235. 242. 253. 270.72� 1� 9� APC 0972 A ( ) n/a 219. n/a n/a n/a n/a n/a n/a
16�H Wall covers 36� 1� 16� APC 1636 A ( ) 209. 215. 224. 239. 252. 259. 274. 290.48� 1� 16� APC 1648 A ( ) 234. 242. 251. 270. 290. 297. 316. 331.60� 1� 16� APC 1660 A ( ) 277. 290. 302. 326. 350. 364. 377. 408.72� 1� 16� APC 1672 A ( ) n/a 328. n/a n/a n/a n/a n/a n/a
18�H Wall cover (replaces (2) 9�H) 36� 1� 18� APC 1836 A ( ) 250. 257. 265. 281. 295. 306. 321. 338.48� 1� 18� APC 1848 A ( ) 315. 321. 330. 350. 368. 377. 395. 416.60� 1� 18� APC 1860 A ( ) 373. 386. 398. 419. 444. 452. 465. 491.72� 1� 18� APC 1872 A ( ) n/a 435. n/a n/a n/a n/a n/a n/a
Order Code
Example: APC 0948 A20
APC Service wall cover09 Height48 WidthA Surface type20 Fabric group
Specification Information
For active face of 39�H Service Wallframe, specify two 9�H covers. Forpassive face (along corridor or wall)specify one 18� cover.
For active face of 48�H Service Wallframe, specify three 9�H covers orone 9�H and one 18�H cover. Forpassive face, specify 27�H cover.
For active face of 64�H Service Wallframe, specify three 9�H covers andone 16�H cover or one 9�H, one18�H, and one 16�H cover. Forpassive face, specify one 27� andone 16�H cover.
For full fabric surface between 5�and 21�, order upholsteredstructural base cover.
For active face of Fence frames,specify two 9� covers each side. Forpassive face, specify one 18� cover.
Surface type:A tackable upholstered
Specify fabric group:10 Fabric group 1015 Fabric group 1520 Fabric group 2030 Fabric group 3040 Fabric group 4050 Fabric group 5055 Fabric group 55
Application Notes
Tackable upholstered Service Wallcovers enclose wall frames between21� and the top crown. Coversincorporate a tackable, acousticalcore in the same outward profile asother upholstered covers.
Specify widths corresponding towall frame width, or in any 12�increment to accommodate 12�Woutlets covers or slat wall covers.Covers may span across a straightwall frame connection.
For active surfaces with access tocables andpower/data/communications outlets,specify 9� and 16�H segmentedcovers as described in SpecificationInformation. Normally, 9� coverfrom 21� to 30� above floor is cabletray or painted steel, and highercovers are painted, marker,upholstered, tackable, or slat wallsurfaces.
For passive Service Wall surfaces(corridors or conference areas)specify 18�H or 27�H covers inplace of two or three 9�H covers.
18�H covers may also be specifiedabove 9�H covers including outletscovers below desk height on 48� or64�H Service Walls.
Service Wall with upholsteredtackable covers has been tested toNRC .40 and STC 22.
When ordering 60� or wider covers,please check width of fabricspecified.
Currents
24
Access coverstackable upholstered
description w d h pattern no. 10 15 20 30 40 45 50 55
27�H Wall cover (replaces (3) 9�H) 36� 1� 27 APC 2736 A ( ) $373. $386. $398. $419. $444. $452. $465. $491.48� 1� 27� APC 2748 A ( ) 468. 484. 494. 521. 544. 560. 579. 604.60� 1� 27� APC 2760 A ( ) 568. 579. 584. 622. 650. 665. 683. 707.72� 1� 27� APC 2772 A ( ) n/a 659. n/a n/a n/a n/a n/a n/a
Order Code
Example: APC 0948 A20
APC Service wall cover09 Height48 WidthA Surface type20 Fabric group
Specification Information
For active face of 39�H Service Wallframe, specify two 9�H covers. Forpassive face (along corridor or wall)specify one 18� cover.
For active face of 48�H Service Wallframe, specify three 9�H covers orone 9�H and one 18�H cover. Forpassive face, specify 27�H cover.
For active face of 64�H Service Wallframe, specify three 9�H covers andone 16�H cover or one 9�H, one18�H, and one 16�H cover. Forpassive face, specify one 27� andone 16�H cover.
For full fabric surface between 5�and 21�, order upholsteredstructural base cover.
For active face of Fence frames,specify two 9� covers each side. Forpassive face, specify one 18� cover.
Surface type:A tackable upholstered
Specify fabric group:10 Fabric group 1015 Fabric group 1520 Fabric group 2030 Fabric group 3040 Fabric group 4050 Fabric group 5055 Fabric group 55
Application Notes
Tackable upholstered Service Wallcovers enclose wall frames between21� and the top crown. Coversincorporate a tackable, acousticalcore in the same outward profile asother upholstered covers.
Specify widths corresponding towall frame width, or in any 12�increment to accommodate 12�Woutlets covers or slat wall covers.Covers may span across a straightwall frame connection.
For active surfaces with access tocables andpower/data/communications outlets,specify 9� and 16�H segmentedcovers as described in SpecificationInformation. Normally, 9� coverfrom 21� to 30� above floor is cabletray or painted steel, and highercovers are painted, marker,upholstered, tackable, or slat wallsurfaces.
For passive Service Wall surfaces(corridors or conference areas)specify 18�H or 27�H covers inplace of two or three 9�H covers.
18�H covers may also be specifiedabove 9�H covers including outletscovers below desk height on 48� or64�H Service Walls.
Service Wall with upholsteredtackable covers has been tested toNRC .40 and STC 22.
When ordering 60� or wider covers,please check width of fabricspecified.
Currents
25
Ser
vice
Wal
lsan
dco
mpo
nent
s
Wall ends and connectors90° and 120° spine connectors
description w d h pattern no. paint
L connector, 90° 6� 6� 39� AX1 L39 ( )( ) $427.6� 6� 48� AX1 L48 ( )( ) 514.6� 6� 64� AX1 L64 ( )( ) 600.
T connector, 90° 6� 7� 39� AX1 T39 ( )( ) 427.6� 7� 48� AX1 T48 ( )( ) 514.6� 7� 64� AX1 T64 ( )( ) 600.
X connector, 90° 7� 7� 39� AX1 X39 ( )( ) 427.7� 7� 48� AX1 X48 ( )( ) 465.7� 7� 64� AX1 X64 ( )( ) 514.
V connector, 120° 51/2� 51/2� 39� AX1 V39 ( )( ) 427.51/2� 51/2� 48� AX1 V48 ( )( ) 514.51/2� 51/2� 64� AX1 V64 ( )( ) 600.
Y connector, 120° 61/2� 51/2� 39� AX1 Y39 ( )( ) 427.61/2� 51/2� 48� AX1 Y48 ( )( ) 514.61/2� 51/2� 64� AX1 Y64 ( )( ) 600.
Order Code
Example: AX1 L39 612 612
AX1 Currents connectorL Type39 Height612 Trim/raceway cover
finish612 Top/end cap finish
Specification Information
For L, T, V, Y connectors specify:
Seventh position:painted finish for vertical trim coverand raceway cover
Eighth position, and X connectors:painted finish for top cap and crownend caps
Specify painted finishes for connectortrim covers and crown end caps.
When ordering connectors for theService Wall with 1�H compactcrown, specify compact crown endcaps separately.
Application Notes
L, T, and X connectors join CurrentsService Wall frames at 90° anglesand include vertical trim covers, topcap and standard crown end caps,and one spare set of straightconnectors.
V and Y connectors join CurrentsService Wall frames at 120° anglesand include vertical trim covers, topcap and standard crown end cap.
Currents
26
Wall ends and connectorsother ends and connectors
description type w d h pattern no. paint list price
Outrigger deep 3� 15� 21� AA1ORD( ) $203.standard 3� 8� 21� AA1OR( ) 147.
High low straight connector 48 - 39� – 5� 48� AX1 HLS4839 ( )( ) 233.64 - 39� – 5� 64� AX1 HLS6439 ( )( ) 395.64 - 48� – 5� 64� AX1 HLS6448 ( )( ) 265.
Service Wall starter 39� 1� 2� 39� AX1 SWS39 ( ) 132.48� 1� 2� 48� AX1 SWS48 ( ) 147.64� 1� 2� 64� AX1 SWS64 ( ) 169.
Straight connector kit (replacement) – – – AX1 S 28.
Order Code
Example: AX1 HLS4839 612 612
AX1 Currents connectorHLS Type4839 Height612 Vertical cover finish612 Crown end finish
Specification Information
Specify painted finishes for outrigger,high low straight connector andService Wall starter.
Application Notes
Outrigger connects to structuralbase cover at any point. Outriggers(or perpendicular systems panels)are required every 8� and adjacentto flat end for adequate support.Specify deep outriggers whencantilevering 24�D worksurfaceswithout adjacent perpendicularsystems panels or Service Wallconnectors.
Standard outrigger should bespecified when desks with servicebeam are positioned along ServiceWall.
High-low straight connectors joinService Wall of different heights in astraight line.
Service Wall starter connectsService Wall to building wall.
Straight connector is replacementhardware kit to join Currents Wallframes of the same height end toend. Kit includes four barrel-shapeconnectors and hardware.
Currents
27
Ser
vice
Wal
lsan
dco
mpo
nent
s
Wall ends and connectorsflat ends and crown end caps
description type d h pattern no. paint list price
Flat end 5� 39� AX1 F39 ( )( ) $136.5� 48� AX1 F48 ( )( ) 153.5� 64� AX1 F64 ( )( ) 172.
Crown end cap APT ( ) 5.
Crown end cap compact Kit of 1 APTA CC1 ( ) 15.Kit of 10 APTA CC ( ) 138.
Order Code
Example: AX1 F48
AX1 Currents connectorF Flat End48 Height612 Vertical cover finish612 Crown end finish
Specification Information
For flat ends specify:
Seventh position:painted finish for outside trim coverand raceway cover
Eighth position:painted finish for crown end cap
When specifying a flat end for aService Wall frame with the 1 inchcompact crown, compact crown endcaps must be ordered separately.
Specify painted finish for standardcrown end cap.
Specify trim grey or easy greyintegral color for compact crown endcap.
Application Notes
Flat end finishes end ofcorresponding height Service Wallwhen end of Service Wall issupported by outriggers.
Currents
28
Wall ends and connectorsFence ends and connectorsconnectors
description w d h pattern no. list price
L connector, 90 degrees 6� 6� 19� AX1 L18 ( ) $429.
T connector, 90 degrees 6� 7� 19� AX1 T18 ( ) 437.
X connector, 90 degrees 7� 7� 19� AX1 X18 361.
V connector, 120 degrees 51/2� 51/2� 19� AX1 V18 ( ) 393.
Y connector, 120 degrees 61/2� 51/2� 19� AX1 Y18 ( ) 180.
Order Code
Example: AX1 L 18 613
AX1 Fence connectorL Type18 Height613 Trim finish
Specification Notes
Specify painted finishes for connectortrim covers.
For L, T, V and Y connectorsspecify finish for vertical trim.
All top caps and crown covers aretrim grey. Specify finish for outsidetrim of flat end.
Application Notes
L, T and X connectors join Fenceframes at 90° angles and includevertical trim covers, top cap andcrown end caps and one set ofstraight connectors.
Y and V connectors join Fenceframes at 120° angles.
Flat end finishes end of Fenceframes and includes crown enddetail.
Specify AX1 F18 ( ) for use withsloped crown covers. Specify AX1AF18L ( ) for use with AutoStradaflat, low profile crown covers.Specify AX1A F18H ( ) for use withAutoStrada flat, high profile crowncovers.
Currents
29
Ser
vice
Wal
lsan
dco
mpo
nent
s
Wall ends and connectorsFence ends and connectorsconnectors
description w d h pattern no. list price
Flat end for use withsloped crown covers
– 5� 21� AX1 F18 ( ) $165.
Flat end for use withflat crown covers
– 5� 21� AX1A F18H ( ) 165.– 5� 21� AX1A F18L ( ) 165.
Order Code
Example: AX1 L 18 613
AX1 Fence connectorL Type18 Height613 Trim finish
Specification Notes
Specify painted finishes for connectortrim covers.
For L, T, V and Y connectorsspecify finish for vertical trim.
All top caps and crown covers aretrim grey. Specify finish for outsidetrim of flat end.
Application Notes
L, T and X connectors join Fenceframes at 90° angles and includevertical trim covers, top cap andcrown end caps and one set ofstraight connectors.
Y and V connectors join Fenceframes at 120° angles.
Flat end finishes end of Fenceframes and includes crown enddetail.
Specify AX1 F18 ( ) for use withsloped crown covers. Specify AX1AF18L ( ) for use with AutoStradaflat, low profile crown covers.Specify AX1A F18H ( ) for use withAutoStrada flat, high profile crowncovers.
Currents
30
Wall ends and connectorsFence ends and connectorsother hardware
description type w d h pattern no. list price
T-end adapter 0� or 11/8� extension 15/8� 21/8� 23/8� AX1 AK1 ( ) $28.
T-end and stabilizer end cabinet adapter 31/2� extension 4� 5� 161/2� AX1 AK3 ( ) 99.
Flat wall starter 48�H service wall 31/4� 27� AX1 FWS 48 85.64�H service wall 31/4� 43� AX1 FWS 64 93.Fence and 39�H wall 31/4� 18� AX1 FWS 39 78.
High-low straight connector 48�H wall - Fence AX1 FHLS4818 ( ) 485.
Order Code
Example: AX1 FWS 39
AX1 Fence endFWS Type39 Height
Specification Information
Specify painted finishes for T-endadapter kits.
Flat wall starter is black only.
Crown end covers are trim grey.
Application Notes
Standard 39�H fence acceptsCurrents T-ends for 39� ServiceWall.
Specify AX1 AK1 adapter kit tocomplete bottom trim and crown endof T-ends with 0� or 11/8� extension.
Specify AX1 AK3 adapter kit tocomplete bottom trim and crown endof T-ends with 3� extension.
Flat wall starter connects Fenceframes and Service Wall to buildingwall.
High-low Fence connector joinsstandard 39�H Fence and 48�HCurrents Service Wall.
Fence T-ends adaptors, stabilizerend cabinet adaptors, high-lowstraight connectors, panel startersfor Morrison panels and linkablescreens, universal panel starters,and panel starter end trim forMorrison panels and linkablescreens are only compatible withFence frames that are specified at40 inches high with the 18-1/2� highleg (AX1 LEG). To use thesecomponents when Fence is plannedwith shorter legs that deliver overallheights of 27 or 28 inches high,please contact Knoll CustomProduct Development for assistance.
Currents
31
Ser
vice
Wal
lsan
dco
mpo
nent
s
Wall frame accessoriesWall frame
description type w d h pattern no. list price
Acoustical inserts 39�H 12� 2� 34� APA 39 $35.48�H 12� 2� 43� APA 48 41.64�H 12� 2� 59� APA 64 56.
Order Code
Example: APT 612
APT Service wall trim612 Painted finish
Specification Information Application Notes
Acoustical inserts fit between studsin Service Wall frame to increasecontrol of sound transmission.Inserts are bagged in heightscorresponding to wall frame. Specifyfour inserts for 48�W Service Wallframe, five for 60�W Service Wallframe, and six for 72�W ServiceWall frame. Service Walls withacoustical inserts have been testedto STC 33.
Currents
32
Wall frame accessoriesFence frame
description type w d h pattern no. list price
Wire manager cover (set of 2) 31/2� 3� 5� AR1VCM5 $72.31/2� 3� 6� AR1VCM6 72.31/2� 3� 183/8� AR1VCM 72.
Carpet grips (set of 10) AA1CG 15.
Non-skid pads (set of 10) AA1NSK 41.
Hardwire fence infeed (NYC) 2 + 2 AR1 EPHF 575.3 + 3 AR1 TPHF 611.
Fence to desk brackets 27�h Fence AA1FDB27( ) 79.28�h Fence AA1FDB28( ) 79.
Fence end bracket kit AB1FAE ( ) 224.
Order Code
Example AR1 VCM
AR1 RacewayVCM Type
Specification Information
Wire manager covers are integralcolor trim grey.
Application Notes
Wire manager covers snap into thesides of the Fence legs to guidecables from the floor to theunderside of the frame.
Carpet grips and/or non-skid padssnap onto bottom of stabilizer feet toprevent legs from sliding.
Hardwire fence infeed is approvedfor City of New York installation.Infeed includes wire manager cover,junction box and connector to deskheight outlet module.
Fence to desk brackets connectFence frames to freestanding tablesto stabilize Fence. Fence to deskbrackets are specified as analternative to stabilizer feet as ameans of stabilizing freestandingFence runs.
Fence to desk brackets are onlycompatible with Fence framesspecified with shorter Fence legs(AX1LEG5, AX1LEG6) where thetotal height of Fence is 27� or 28� tothe top of the crown.
Fence to desk brackets may not bespecified as a means of endsupporting worksurfaces. Fence todesk brackets may only be specifiedfor use with freestanding tables.
Fence end brackets attach to theCurrents Fence to support one endof rectilinear or one back edge of acorner worksurface when the otherends are properly supported by legs,storage or panel brackets. Refer tothe specific worksurfaceApplication Notes for supportrequirements.
Fence end brackets support theunderside of the worksurface in 1�increments from 26� to 28� (27� to29� top height).
Currents
33
Ser
vice
Wal
lsan
dco
mpo
nent
s
Spine ends and connectorsSpine end connectors for linkable screens and Morrison panels
description application h w d pattern no. list
Spine end connector 39�h spine 39� 5� 1/2� AX1SEC3939 ( )( )( )( ) $274.48�h spine 48� 5� 1/2� AX1SEC4848 ( )( )( )( ) 287.64�h spine 64� 5� 1/2� AX1SEC6464 ( )( )( )( ) 343.
Spine end connector to top of compact 1�h crown 39�h spine 40� 5� 1/2� AX1SEC4039 L ( )( ) 274.48�h spine 49� 5� 1/2� AX1SEC4948 L ( )( ) 287.64�h spine 65� 5� 1/2� AX1SEC6564 L ( )( ) 343.
Spine end connector to top of Currents 4�h crown 39�h spine 43� 5� 1/2� AX1SEC4339 C ( )( ) 274.48�h spine 52� 5� 1/2� AX1SEC5248 C ( )( ) 287.64�h spine 68� 5� 1/2� AX1SEC6864 C ( )( ) 343.
Inside base trim coverfor Currents raceway
4� 5� AX1SECBT ( ) 54.
Order Code
Example: AX1 SEC 3939 L 613613 812
AX1 Spine connectorSEC Type39 Connector height39 Spine heightL Crown type613 Crown end cap finish613 Vertical cover finish812 Top cap finish
Specification Information
For spine end connectors specify:
1.Crown typeC=Currents standard 4�hL=low profile flat 1�H=high profile flat 11/4�F=compact crown 1�
2.Crown end cap finishStandard, low and high profile flatand compact crown end caps areavailable in all standard paintfinishes and 813 Trim Grey.Compact crown end caps are alsoavailable in 812 Easy Grey.
3.Vertical cover finish:All standard paint finishes
4.Top cap for vertical cover:812=Easy Grey813=Trim GreyAnd all standard paint finishes
Spine end connectors on this pagealign with spine base covers13/16�above the floor.
Application Notes
Spine end connectors are completevertical cover and top trim for theend of an AutoStrada or Currentsspine. Side edges of end connectorsaccept end starters for linkablescreens and other systems panels ofthe same height or lower.
Spine end connectors includepainted aluminum cover withbeveled top cap and the specifiedflat, compact, or standard crown endcap.
Spine end connectors to top ofcompact crown are a visualalternative that replaces the crownend cap with a taller aluminum endcover and flat top cap.
Spine end connectors to top ofCurrents crown are recommendedwhen attaching any end startedpanel that is between the nominalheight of the spine and the actualheight with crown, such as 42�hpanel to 39�h spine with 4�h crown.Spine end connectors to top ofCurrents crown enclose the end ofspine and standard crown andinclude flat top cap and inside toptrim cover.
Inside base trim for Currentsraceway is recommended to finishinside of any spine end connectorwhen combined with standardCurrents recessed base racewaycovers. Base trim is not requiredwith AutoStrada spine base covers.
Currents
34
Spine ends and connectorsHigh-low spine end connectorsfor linkable screens and Morrison panels
description application h w d pattern no. list
Spine end connector 42�h panel/39�h spine 39� 5� 1/2� AX1SEC4239 ( )( ) $274.
48�h panel/39�h spine 48� 5� 1/2� AX1SEC4839 ( )( ) 287.
56�h panel/39�h spine 56� 5� 1/2� AX1SEC5639 ( )( ) 330.
64�h panel/39�h spine 64� 5� 1/2� AX1SEC6439 ( )( ) 343.
56�h panel/48�h spine 56� 5� 1/2� AX1SEC5648 ( )( ) 330.
64�h panel/48�h spine 64� 5� 1/2� AX1SEC6448 ( )( ) 343.
80�h panel/48�h spine 80� 5� 1/2� AX1SEC8048 ( )( ) 522.
80�h panel/64�h spine 80� 5� 1/2� AX1SEC8064 ( )( ) 499.
Inside base trim coverfor Currents raceway
4� 5� AX1SECBT ( ) 54.
Order Code
Example: AX1 SEC 6448 613 812
AX1 Spine connectorSEC Type64 Panel height48 Spine height613 Painted finish613 Trim finish
Specification Information
For spine end connectors specify:
1.Vertical cover finish:All standard paint finishes
2.Top cap for vertical cover812=Easy Grey813=Trim GreyAnd all standard painted finishes
Spine end connectors on this pagealign with spine base covers13/16�above the floor.
Application Notes
High low spine end connectors arecomplete end cover and trim for anAutoStrada or Currents spine, whenattached panels are taller thanthe spine. High low spine endconnectors match the height of theattached linkable screen orMorrison panel. Side edges of spineend connectors accept end startersfor linkable screens and Morrisonpanels of the same height or lower.
High low spine end connectorsinclude painted aluminum outsidecover with flat top cap and insidecover over the end of the spine.
Inside base trim for Currentsraceway is recommended to finishinside of any spine end connectorwhen combined with standardCurrents recessed base racewaycovers. Base trim is not requiredwith AutoStrada spine base coves.
Note: 42�h panel/39�h spinecombination (AX1SEC4239) canonly be specified with compact orflat crown versions of the spine. Forcombination of 39�h spine withstandard 4�h crown and 42�h panelsspecify AXISEC4339C ( )( ).
Currents
35
Ser
vice
Wal
lsan
dco
mpo
nent
s
Spine ends and connectorsSpine end connectors for Dividends Horizon panels and screens
description application h w d pattern no. list
Spine end connector 36�h panel/39�h spine 39� 5� 1/2� AX1SED3939 ( )( )( )( ) $274.36�h-42�h panel/ 48�h spine 48� 5� 1/2� AX1SED4848 ( )( )( )( ) 287.36�h-64�h panel/ 64�h spine 64� 5� 1/2� AX1SED6464 ( )( )( )( ) 343.42�h panel/ 39�h spine + 1� crown 42� 5� 1/2� AX1SED4239 ( )( ) 274.42�h panel/ 39�h spine + 4� crown 43� 5� 1/2� AX1SED4339C ( )( ) 274.50�h panel/ 39�h spine 50� 5� 1/2� AX1SED5039 ( )( ) 287.50�h panel/ 48�h spine + 1� crown 50� 5� 1/2� AX1SED5048 ( )( ) 302.50�h panel/ 48�h spine + 4� crown 52� 5� 1/2� AX1SED5248C ( )( ) 287.57�h panel/ 39�h spine 57� 5� 1/2� AX1SED5739 ( )( ) 330.57�h panel/ 48�h spine 57� 5� 1/2� AX1SED5748 ( )( ) 330.64�h panel/ 39�h spine 64� 5� 1/2� AX1SED6439 ( )( ) 343.64�h panel/ 48�h spine 64� 5� 1/2� AX1SED6448 ( )( ) 343.78�h panel/ 48�h spine 78� 5� 1/2� AX1SED7848 ( )( ) 522.78�h panel/ 64�h spine 78� 5� 1/2� AX1SED7864 ( )( ) 499.
Inside base trim coverfor Currents raceway
4� 5� AX1SECBT ( ) 54.
Order Code
Example: AX1 SED 6448 613 812
AX1 Spine connectorSED Type64 Panel height48 Spine height613 Vertical cover finish812 Top cap finish
Specification Information
For spine end connectors with panellower than spine specify crown typeand finish for crown end cap.1. Crown type:
C=Currents standard 4�hL=low profile flat 1�hH=high profile flat 11/4�hF=compact 1�h
2. All crown end caps are availablein all painted finishes.
For all spine end connectorsspecify vertical cover and toptrim finish:
3. Vertical cover finish:All standard paint finishes
4. Top cap for vertical cover:812=Easy Grey813=Trim GreyAnd all standard painted finishes
End connectors on this pagebegin1/2� above floor.
Application Notes
Spine end connectors are completeend cover and trim for anAutoStrada or Currents spine. Sideedges of spine end connectorsaccept end starters for DividendsHorizon panels and screens.
In most cases spine end connectorsmatch the height of the attachedDividends Horizon panel/screen.When attached panel/screen islower than the spine, the spine endconnector is as high as the nominalheight of the spine and the crownrequires an end cap.
Specify low profile flat metal crowncovers to align with a 50�hDividends Horizon panel/screen.
When attached panel/screen isbetween the nominal height of thespine and the top of the Currents4�h crown, spine end connectormust cover the entire height of thespine with crown.
Spine end connectors includepainted aluminum outside coverwith flat top cap and inside cover(where applicable) over the end ofthe spine.
Inside base trim for Currentsraceway is recommended to finishinside when combined withstandard Currents recessed baseraceway covers. Base trim is notrequired with AutoStrada spine basecovers.
Currents
36
Spine ends and connectors31/2� spine extender kit for use with ceiling infeed or panels
description application h w d pattern no. list
Spine extender kit for usewith Currents Spine
39�h spine 39� 5� 4� AX1SX39 C (L/C/P)( )( )( ) $562.48�h spine 48� 5� 4� AX1SX48 C (L/C/P)( )( )( ) 581.64�h spine 64� 5� 4� AX1SX64 C (L/C/P)( )( )( ) 687.
Spine extender kit for usewith AutoStrada Spine
39�h spine 39� 5� 4� AX1SX39 A (L/C/P)( )( )( ) 687.48�h spine 48� 5� 4� AX1SX48 A (L/C/P)( )( )( ) 704.64�h spine 64� 5� 4� AX1SX64 A (L/C/P)( )( )( ) 817.
Order Code
Example: AX1 SX 48 AL 613 613613
AX1 Spine connectorSX Type48 Spine heightA Spine typeL Crown end type613 Vertical finish613 Base trim finish613 Top cap finish
Specification Information
For all 3 1/2� spine extenders specifyspine base type:
A AutoStradaC Currents
Then specify crown end type.L=Flat low/high profile metal crownend capC=Standard and compact slopedend capP=Power Pole
Then specify finish for vertical trimcovers, all standard paintedfinishes.
Then specify base cover finish.AutoStrada spine base covers areclear anodized aluminum (AA) orpainted finish excluding silver.Currents spine raceway covers areavailable in any painted finish only.
Then specify top cap finish (ifapplicable).
Application Notes
Spine extenders include brackets,side and top trim covers between theend of a spine and any spine endconnector to add 3 1/2� to the lengthof a spine.
Spine end connector must bespecified separately to finish offface of spine extender.
Spine extender dimension matchesthat of the Currents 3 1/2�x 5� ceilinginfeed panel which may be addedbetween nominal spine height andceiling for connection to buildingpower, data and communicationssupply.
This extension can also make up forthe dimensional gain of oneDividends Horizon panel or screenin the middle of a cluster ofworkstations.
In most cases the spine endconnector matches the height of theattached Dividends Horizon panelor screen, but the extending area isonly as high as the nominal heightof the spine (bottom of crown) so thecrown always requires an end cap.
When attached panel or screen islower than the spine, the spine endconnector should be the same heightas the nominal height of the spine.
Currents
37
Ser
vice
Wal
lsan
dco
mpo
nent
s
End StartersTo attach linkable screens or Morrison panels to spine end connector
description application h w d pattern no. 00 02 04
End starters for linkable screens 30�h screen 25� 1� 1/2� - 41/2� AX1LES30 ( )( )( ) $165. $178. $191.39�h screen 34� 1� 1/2� - 41/2� AX1LES39 ( )( )( ) 178. 191. 213.48�h screen 43� 1� 1/2� - 41/2� AX1LES48 ( )( )( ) 206. 233. 259.64�h screen 59� 1� 1/2� - 41/2� AX1LES64 ( )( )( ) 242. 280. 321.
End starters for Morrison panels 30�h panel 30� 1� 1/2� - 41/2� AX1MES30 ( )( )( ) 171. 178. 191.39�h panel 39� 1� 1/2� - 41/2� AX1MES39 ( )( )( ) 206. 213. 233.42�h panel 42� 1� 1/2� - 41/2� AX1MES42 ( )( )( ) 206. 213. 242.48�h panel 48� 1� 1/2� - 41/2� AX1MES48 ( )( )( ) 213. 218. 249.56�h panel 56� 1� 1/2� - 41/2� AX1MES56 ( )( )( ) 249. 274. 310.64�h panel 64� 1� 1/2� - 41/2� AX1MES64 ( )( )( ) 249. 274. 310.80�h panel 80� 1� 1/2� - 41/2� AX1MES80 ( )( )( ) 356. 410. 493.
End starter top cap for Morrison panel withlinkable screen trim
00, 02 or 04 offset 1� 21/4� AX1LES E ( ) 11. 11. n/a
Order Code
Example: AX1 LES48 02 613 812
AX1 Spine connectorL for linkable screensES End starter48 Panel height02 Offset613 Painted finish812 Trim finish
Specification Information
For spine end starters specify:
1.Configuration00=Flush02=Offset one panel04=Offset two panels
2.Paint finish for end starter:All standard paint finishes
3.Trim finish for top cap:812=Easy Grey813=Trim GreyOr all standard paint finishes forMorrison top cap.
End starters on this page align withspine base coves13/16� above thefloor.
Application Notes
End starters connect a linkablescreen or panel to either side of aspine end connector of the sameheight or taller.
End starters for linkable screensand Morrison panels includeconnector track and top cap.
For Morrison panels that havelinkable screen trim also specifyend starter linkable screen end cap.
End starters are available in threeconfigurations: flush with end ofspine or offset one or twoscreen/panel thickness beyond endof spine.
For full access to entire width ofspine surface specify end startersoffset one panel thickness (02suffix).
For a cluster of two workstationswith one screen or panel betweenspecify one end starter offset twopanel thicknesses (04 suffix) andone offset one thickness (02 suffix).
For a cluster of three workstations(two intermediate panels) specifytwo end starters offset two panelthicknesses (04 suffix).
For a cluster of four workstations(three intemediate panels) extendthe spine 12� and specify two flushend starters (00 suffix).
When specifying an end starter topcap for a Morrison panel withlinkable screen trim, note that the02 offset top cap will also work in an04 offset application.
Currents
38
End StartersTo attach Dividends Horizon panels and screens to spine endconnector
description application h w d pattern no. list
End starters for DividendsHorizon panels and screens
36�h panel, flush, left end of Service Wall 36� 1� 3� AX1DHES3600L(5)( ) $217.36�h panel, flush, right end of Service Wall 36� 1� 3� AX1DHES3600R(5)( ) 217.36�h panel, offset 1 panel thickness, left end ofService Wall
36� 1� 3� AX1DHES3603L(5)( ) 217.
36�h panel, offset 1 panel thickness, right end ofService Wall
36� 1� 3� AX1DHES3603R(5)( ) 217.
42�h panel, flush, left end of Service Wall 42� 1� 3� AX1DHES4200L(5)( ) 217.42�h panel, flush, right end of Service Wall 42� 1� 3� AX1DHES4200R(5)( ) 217.42�h panel, offset 1 panel thickness, left end ofService Wall
42� 1� 3� AX1DHES4203L(5)( ) 217.
42�h panel, offset 1 panel thickness, right end ofService Wall
42� 1� 3� AX1DHES4203R(5)( ) 217.
50�h panel, flush, left end of Service Wall 50� 1� 3� AX1DHES5000L(5)( ) 217.50�h panel, flush, right end of Service Wall 50� 1� 3� AX1DHES5000R(5)( ) 217.50�h panel, offset 1 panel thickness, left end ofService Wall
50� 1� 3� AX1DHES5003L(5)( ) 217.
50�h panel, offset 1 panel thickness, right end ofService Wall
50� 1� 3� AX1DHES5003R(5)( ) 217.
57�h panel, flush, left end of Service Wall 57� 1� 3� AX1DHES5700L(5)( ) 217.57�h panel, flush, right end of Service Wall 57� 1� 3� AX1DHES5700R(5)( ) 217.57�h panel, offset 1 panel thickness, left end ofService Wall
57� 1� 3� AX1DHES5703L(5)( ) 217.
57�h panel, offset 1 panel thickness, right end ofService Wall
57� 1� 3� AX1DHES5703R(5)( ) 217.
64�h panel, flush, left end of Service Wall 64� 1� 3� AX1DHES6400L(5)( ) 217.64�h panel, flush, right end of Service Wall 64� 1� 3� AX1DHES6400R(5)( ) 217.64�h panel, offset 1 panel thickness, left end ofService Wall
64� 1� 3� AX1DHES6403L(5)( ) 217.
64�h panel, offset 1 panel thickness, right end ofService Wall
64� 1� 3� AX1DHES6403R(5)( ) 217.
Order Code
Example: AX1 DHES 36 00 L (5)
AX1 Spine connectorDH Dividends HorizonES End starter36 Panel height00 Offset5 Top cap type613 Painted finish
Specification Information
1.Offset00=Flush03=Offset 1 panel thickness
2.Top cap type5=Metal flat
3.Paint finishAll standard paint finishes
Application Notes
End starters connect a DividendsHorizon panel or screen to eitherside of a same height or taller spineend connector. End starters forDividends Horizon panels andscreens include specified end topcap.
End starters may be positioned ineither of two configurations: flushwith end of spine or offset one panelthickness beyond end of spine. Forfull access to entire width of spinesurface, position end starters offsetone panel thickness.
For a single workstation (0intermediate panels), specify 2spine end connectors and 2 endstarters positioned offset by 1 panelthickness.
For a cluster of 2 workstations (1intermediate panel), specify 1 panelstarter, 2 spine end connectors, 1spine extender, and 2 end starterspositioned offset by 1 panelthickness.
For a cluster of 3 workstations, (2intermediate panels), extend thespine another 12�, specify 2 panelstarters, 2 spine end connectors,and 2 end starters positioned flush.
For a cluster of 4 workstations (3intermediate panels), extend thespine 12� and specify 3 panelstarters, 2 spine end connectors,and 2 end starters (1 end starterflush and the other offset by 1 panelthickness).
For a cluster of 5 workstations (4intermediate panels) extend thespine by 12� and specify 4 panelstarters, 2 spine end connectors,and 2 end starters positioned offsetby 1 panel thickness.
Currents
39
Ser
vice
Wal
lsan
dco
mpo
nent
s
Panel system starters and T-endsMorrison or linkable screen panel starters
description type w d h pattern no. paint
Morrison and linkable screen panel starters 30�H panel 4� 1� 26� AA1MPS30( ) $132.39�H panel/screen 4� 1� 35� AA1MPS39( ) 132.42�H panel 4� 1� 38� AA1MPS42( ) 132.48�H panel/screen 4� 1� 44� AA1MPS48( ) 138.56�H panel 4� 1� 52� AA1MPS56( ) 144.64�H panel/screen 4� 1� 60� AA1MPS64( ) 149.74�H panel 4� 1� 70� AA1MPS74( ) 154.80�H panel 4� 1� 76� AA1MPS80( ) 154.Morrison raceway shroud 21/4� 3� 4� AA1MRS( ) 56.panel/screen top clip AA2 MTC ( ) 66.
Morrison end trim 30�H panel 1� 21/4� 9� AA1MET30( ) 46.39�H panel 1� 21/4� 18� AA1MET39( ) 46.42�H panel 1� 21/4� 21� AA1MET42( ) 49.48�H panel 1� 21/4� 27� AA1MET48( ) 51.56�H panel 1� 21/4� 35� AA1MET56( ) 56.64�H panel 1� 21/4� 43� AA1MET64( ) 66.74�H panel 1� 21/4� 53� AA1MET74( ) 74.80�H panel 1� 21/4� 59� AA1MET80( ) 78.
Currents end trim 39� linkable screen 1� 2� 18� AA1CET39( ) 46.48� linkable screen 1� 2� 27� AA1CET48( ) 51.64� linkable screen 1� 2� 43� AA1CET64( ) 66.
Order Code
Example: AA1 MPS48 612
AA1 AccessoryM MorrisonPS Panel starter48 Panel height612 Finish
Specification Information
Specify paint finishes for panelstarters, Morrison raceway shroudand end trim.
Specify trim grey or easy greyintegral color for Currents end trim.
Application Notes
Panel starters attach perpendicularpanels or linkable screens toService Wall structural base covers(5� - 21�H).
Panel starters include clampbracket to any height Service Walland full height connector track withmodified top wedge block. ForMorrison also specify high/lowcorner top cap MT5 HLC ( ) in widthof first panel.
Top clip connects panel connectortrack to Service Wall crown. Specifytop clip for added stiffness of panelshigher than 48� or whenevercantilevering components frompanel. Top clip is not compatiblewith end trim.
Specify raceway shroud ifconnecting power from Service Wallto Morrison panel.
Optional Morrison end trim fills 5/8�reveal between panel endand Service Wall surface. End trimalso includes end top cap (high/lowcorner top cap is not required in thisapplication).
Currents end trims are optionalfillers for linkable screen starters.End trims may interfere with easyaccess to Service Wall covers.
Currents
40
Panel system starters and T-endsMorrison, Currents screens and linkable screen T-endsnon-upholstered
description type w d h pattern no.0‘‘ or 1 1/8’’
extension31/2�
extension
T ends for Currents screens and linkable screens 39� screen/39� spine 21/4�-53/4� 7� 39� AX2 C3939 ( )( )( ) $894. $1,005.48� screen/39� spine 21/4�-53/4� 7� 48� AX2 C4839 ( )( )( ) 1,039. 1,147.48� screen/48� spine 21/4�-53/4� 7� 48� AX2 C4848 ( )( )( ) 967. 1,074.64� screen/39� spine 21/4�-53/4� 7� 64� AX2 C6439 ( )( )( ) 1,185. 1,289.64� screen/48� spine 21/4�-53/4� 7� 64� AX2 C6448 ( )( )( ) 1,112. 1,218.64� screen/64� spine 21/4�-53/4� 7� 64� AX2 C6464 ( )( )( ) 1,112. 1,218.
T ends for Morrison panels 39� panel or 39� spine 6� 7� 39� AX1 M3939 ( )( )( ) 894. 1,005.42� panel/39� spine 6� 7� 42� AX1 M4239 ( )( )( ) 967. 1,074.48� panel/39� spine 6� 7� 48� AX1 M4839 ( )( )( ) 1,039. 1,147.48� panel/48� spine 6� 7� 48� AX1 M4848 ( )( )( ) 967. 1,074.56� panel/39� spine 6� 7� 56� AX1 M5639 ( )( )( ) 1,112. 1,218.56� panel/48� spine 6� 7� 56� AX1 M5648 ( )( )( ) 1,039. 1,147.64� panel/39� spine 6� 7� 64� AX1 M6439 ( )( )( ) 1,185. 1,289.64� panel/48� spine 6� 7� 64� AX1 M6448 ( )( )( ) 1,112. 1,218.64� panel/64� spine 6� 7� 64� AX1 M6464 ( )( )( ) 1,112. 1,218.80� panel/39� spine 6� 7� 80� AX1 M8039 ( )( )( ) 1,431. 1,574.80� panel/48� spine 6� 7� 80� AX1 M8048 ( )( )( ) 1,431. 1,574.80� panel/64� spine 6� 7� 80� AX1 M8064 ( )( )( ) 1,431. 1,574.
Order Code
Example: AX1 M6448 3 612, 612
AX1 Currents connectorM Morrison64 Morrison height48 Currents height3 Extension612 Top cap finish612 Vertical trim cover
Specification Information
T ends begin with AX1-prefix.Fourth position indicates attachedpanel system:C Currents screen/linkable
screenM Morrison panel
Fifth/sixth position: height of panel.
Seventh/eighth position: height ofservice wall.
Ninth position: extension at end ofspine.0 0� extension1 11/8� extension3 31/2� extension
Tenth position: painted finish forMorrison top caps and crown end.
Eleventh position: painted finish forvertical trim cover.
When ordering T-ends for ServiceWall, specify crown end capsseparately.
Application Notes
T-end encloses the end of a ServiceWall and connects to perpendicularCurrents wall-attached screens,linkable screens or panels on one orboth sides. T-ends includeMorrison-style top trim for the 7�wide connection to panels orscreens.
Currents T-end includes 5� and 6�wide trim and two end caps.
Morrison T-end includes 7� widetrim.
Use 5� wide trim and two end capswhen connecting Currents screenson both sides.
Use 6� wide trim and one end capwhen connecting to Currentsscreens on one side only. SpecifyMorrison end connector separatelyto finish side edge without aconnected screen.
Use 7� wide trim when connecting toMorrison panels.
Specify Morrison end connector, topcap and raceway cover kitsseparately to finish side edge ofMorrison T-ends without aconnected panel.
Specify Morrison straight connectorseparately to attach linkable screenor panel.
Specify T-ends for Morrison orCurrents to capture the end of theService Wall (no extension) or toextend the Service Wall 11/8� or31/2�. This extension enables preciseplanning of multiple workstationsand intermediate panels betweenworkstations.
Specify two 0� T-ends for a singleworkstation on each side (nointermediate panels).
Specify two 11/8� T-ends for oneintermediate panel, one 11/8� andone 31/2� for two panels, and two31/2� for three intermediate panels.
T-ends with 31/2� extension haveremovable inside covers and acceptceiling infeed panel.
Currents
41
Ser
vice
Wal
lsan
dco
mpo
nent
s
Panel system starters and T-endsEquity panel starters, end starters and trim kits
description type pattern no. list price
Equity panel starters 40� AA1EPS40 $317.48� AA1EPS48 328.53� AA1EPS53 343.60� AA1EPS60 359.65� AA1EPS65 371.
Equity end starters 40� AX1 E40 317.48� AX1 E48 328.53� AX1 E53 343.60� AX1 E60 359.65� AX1 E65 371.
Equity end trim kits 39�H wall AX1 EET39(T,R,L) 132.48�H wall AX1 EET48(T,R,L) 173.64�H wall AX1 EET64(T,R,L) 215.Crown end cap APT ( ) 5.
Gap filler 40�/64� AX1 EGF24 29.48�/64� AX1 EGF16 11.53�/64� AX1 EGF11 8.60�/64� AX1 EGF4 6.
Order Code
Example: AX1EET64T 612
AX1 AccessoryEET Equity end trim64 Panel heightT ‘‘T’’ both sides612 Trim finish
Specification Information
Specify paint finish for Equity endand panel starters, trim kits andcrown end cap.
Note:For more specific applicationinformation, please refer to the 1999Equity Planning Guide. Additionalfinishes are available for crown endcap.
Application Notes
Equity panel starters attachperpendicular panels to ServiceWall structural base covers. Equitypanel starter includes clampbracket and adapter. Both end andpanel starters include top clip foradded stiffness. No connector postis required for either starter.
Equity end starter supportsperpendicular panel run on thecenterline of the end of the ServiceWall. Perpendicular panels shouldbe at the same height or higher thanthe Service Wall.
The Equity end trim kit enclosesand flushes out the end ofthe Service Wall with attached, endstarted Equity panels.
Specify trim kit suffix ‘‘T’’ for panelson both sides, ‘‘L’’ or ‘‘R’’ forattached panels only on left or rightside of end of the Service Wall (asseen from outside of ‘‘T’’ end). Alsospecify crown end cap for all endconditions.
Gap fillers fill the gap whenattaching a lower height Equitypanel at the end of a 64�H ServiceWall.
Currents
42
Panel system starters and T-endsReff panel starters and T-ends
description type pattern no. price0� or 11/8�extension
31/2�extension
Reff panel starter 34�H (includes AA1RTC bracket) AA1RPS34( )( )( )( ) $150.42�H (includes AA1RTC bracket) AA1RPS42( )( )( )( ) 261.49�H (includes AA1RTC bracket) AA1RPS49( )( )( )( ) 269.64�H (includes AA1RTC bracket) AA1RPS64( )( )( )( ) 286.79�H (includes AA1RTC bracket) AA1RPS79( )( )( )( ) 297.
T-end frame for Reff panels 42� Reff panel to 39� Currents AX1 R34239( )( ) 1,074. 1,185.49� Reff panel to 39� Currents AX1 R34939( )( ) 1,085. 1,196.49� Reff panel to 48� Currents AX1 R34948( )( ) 1,018. 1,123.64� Reff panel to 39� Currents AX1 R36439( )( ) 1,200. 1,307.64� Reff panel to 48� Currents AX1 R36448( )( ) 1,130. 1,239.64� Reff panel to 64� Currents AX1 R36464( )( ) 1,130. 1,239.79� Reff panel to 39� Currents AX1 R37939( )( ) 1,210. 1,320.79� Reff panel to 48� Currents AX1 R37948( )( ) 1,138. 1,245.79� Reff panel to 64� Currents AX1 R37964( )( ) 1,102. 1,210.
Top clip (replacement part) AA1RTC( ) 107.
Order Code
Example: AA1-RPS64 48 A 613613
AA1 AccessoryR ReffPS Panel starter64 Panel height48 Adjoining panel widthA Panel top trim profile613 Finish, panel starter613 Panel top trim finish
Specification Information
For T-end specify extension at end ofspine, then paint finish. Extension atend of Service Wall:0 0� extension1 11/8� extension3 31/2� extensions
Specify following for panel starter:1 Adjoining panel width2 Top trim profile of adjoining
panel3 Painted finish for panel
starter4 Top trim finish
In addition to Currents finishes, allstandard Reff system paintedfinishes are available.
When ordering T-ends for theService Wall, specify crown endcaps separately.
Application Notes
Panel starters attach perpendicularReff panels to Service Wall. Panelstarter includes clamp bracket tostructural base cover, top clip,vertical extrusion corresponding toReff panel height and top trim foradjoining panel.
T-end encloses the end of a ServiceWall and connects to perpendicularReff panels on one or both sides.
Specify Reff straight connectorseparately to attach panel.
Specify Reff end connector to finishside edge without a connected wall.
Specify T-end with 0�, 11/8�, or 31/2�of extension to accommodate the‘‘creep’’ of panels betweenworkstations on each side of ServiceWall.
Specify two 0� T-ends for a singleworkstation on each side (nointermediate panels).
Specify two 11/8� T-ends for oneintermediate panel, one 11/8� andone 31/2� for two panels, and two31/2� for three intermediate panels.
T-ends with 31/2� extension haveremovable inside covers and acceptceiling infeed panel.
Only Reff finishes are available forAA1RTC( ) top clip.
Currents
43
Ser
vice
Wal
lsan
dco
mpo
nent
s
Panel system starters and T-endsReff T-end fabric and wood cover sets
description type height pattern no. list price
Monolithic cover set Fabric 42� R3B0P0F4207 $162.49� R3B0P0F4907 183.64� R3B0P0F6407 215.79� R3B0P0F7907 247.
Wood 42� R3B0P0H4207 166.49� R3B0P0H4907 188.64� R3B0P0H6407 221.79� R3B0P0H7907 252.
Tiled cover set Fabric 42� R3B0T0F4207 162.49� R3B0T0F4907 183.64� R3B0T0F6407 215.79� R3B0T0F7907 247.
Wood 42� R3B0T0H4207 166.49� R3B0T0H4907 188.64� R3B0T0H6407 221.79� R3B0T0H7907 252.
Order Code
Example: R3B0P0F4207
R3B Reff0P0F Monolithic42 Panel height07 Width
Specification Information
See Reff System for full selection ofpainted finishes, fabrics and woodveneers for T-end cover sets.
Specify:1. Top trim profile2. Panel finishes3. Top trim finish4. Base finish
Top trim profile:A FlatB SquareC Bullnose
Base height:4 4� base height
6� base height is currently notavailable.
Application Notes
Specify covers in monolithic or tiledsets to complete T-end frames forReff.
Monolithic cover sets include araceway cover and a single snap-inpanel above.
Tiled sets include raceway coverand segmented tiles correspondingto adjacent Reff tiled panels.
Reff tiled module horizontal revealsare at nominal 19�, 34�, 49� and 64�above the floor and do not align withservice wall cover reveals.
When ordering T-ends for theService Wall, specify crown endcaps separately.
Currents
44
Panel system starters and T-endsUniversal panel starters and T-ends
description w d h pattern no. paint
Universal T-end adapter 2-6� 7� 39� AA1UA39( ) $93.2-6� 7� 48� AA1UA48( ) 113.2-6� 7� 64� AA1UA64( ) 124.
Universal panel starters 3� 1� 39� AA1UPS39( ) 209.3� 1� 48� AA1UPS48( ) 224.3� 1� 64� AA1UPS64( ) 240.
Universal top clip AA2 UTC ( ) 90.
Order Code
Example: AA1 UPS48 612
AA1 AccessoryUPS Panel starter48 Panel height612 Finish
Specification Information
Specify paint finishes for Universalend and panel starter.
Application Notes
Universal adapters and startersintegrate other panel systems withthe Service Wall. Vertical surfaceaccepts architectural wall starter ofmost other systems.
T-end adapters include connector tocorresponding height T-end forCurrents screen (specifiedseparately).
Panel starter includes clampbracket to structural base cover onService Wall.
Top clip gives added stability toattached panels of the same heightor higher than the Service Wall.
Currents
45
Ser
vice
Wal
lsan
dco
mpo
nent
s
Panel system starters and T-endsFence panel starters
description type w d h pattern no. list price
Panel starter for Morrison panels/ Currentslinkable screens
30�H panel 4� 1� 26� AA1FMPS30( ) $85.39�H panel/screen 4� 1� 35� AA1FMPS39( ) 86.42�H panel 4� 1� 38� AA1FMPS42( ) 86.48� H panel/screen 4� 1� 44� AA1FMPS48( ) 94.56�H panel 4� 1� 52� AA1FMPS56( ) 94.64� H panel/screen 4� 1� 60� AA1FMPS64( ) 99.
Universal panel starter 3� 1� 35� AA1FUPS39( ) 135.
Universal top clip AA2 UTC ( ) 90.
Morrison and linkable screen panel starters panel/screen top clip AA2 MTC ( ) 66.
Order Code
Example: AA1 FMPS48 613
AA1 AccessoryF FenceMPS Morrison panel starter48 Panel height613 Finish
Specification Information
Specify paint finish for panel startersand top clip.
Application Notes
Panel starters attach perpendicularpanels to the Fence bottom rail.
Panel starters include clampbracket and full height connectortrack with modified top wedgeblock. For Morrison also specifyhigh/low corner topcap in width offirst panel.
Top clip connects panel connectortrack with the Fence or Service Wallcrown. Specify top clip for addedstiffness of panels higher than 48� orwhenever cantilevering componentsfrom panel.
Top clip is not compatible with endtrim.
Universal panel starters integrateother panel systems with Fence.Vertical surface acceptsarchitectural wall starters of mostother systems.
Fence T-ends adaptors, stabilizerend cabinet adaptors, high-lowstraight connectors, panel startersfor Morrison panels and linkablescreens, universal panel starters,and panel starter end trim forMorrison panels and linkablescreens are only compatible withFence frames that are specified at40 inches high with the 18-1/2� highleg (AX1 LEG). To use thesecomponents when Fence is plannedwith shorter legs that deliver overallheights of 27 or 28 inches high,please contact Knoll CustomProduct Development for assistance.
Currents
46
Panel system starters and T-endsend trim for Fence panel starters
description type w d h pattern no. list price
End trim for Morrison panels 30�H panel 1� 21/4� 30� AA1FMET30( ) $116.39�H panel 1� 21/4� 39� AA1FMET39( ) 116.42�H panel 1� 21/4� 42� AA1FMET42( ) 119.48� H panel 1� 21/4� 48� AA1FMET48( ) 122.56�H panel 1� 21/4� 56� AA1FMET56( ) 125.64� H panel 1� 21/4� 64� AA1FMET64( ) 136.
End trim for linkable screens 39� H screen 1� 2� 35� AA1FCET39 95.48� H screen 1� 2� 44� AA1FCET48 107.64� H screen 1� 2� 60� AA1FCET64 119.
Order Code
Example: AA1 FMET39 612
AA1 AccessoryF FenceMET Morrison end trim39 Panel height612 Finish
Specification Notes
Specify paint finish for end trim forMorrison panels.
Morrison end trim includes endraceway cover in matching color.
Linkable screen end trim is trimgrey integral color.
Application Notes
Optional end trim is available forthe panel starter connector track.End trim covers the connector trackabove and below the panel starterclamp bracket.
Fence T-ends adaptors, stabilizerend cabinet adaptors, high-lowstraight connectors, panel startersfor Morrison panels and linkablescreens, universal panel starters,and panel starter end trim forMorrison panels and linkablescreens are only compatible withFence frames that are specified at40 inches high with the 18-1/2� highleg (AX1 LEG). To use thesecomponents when Fence is plannedwith shorter legs that deliver overallheights of 27 or 28 inches high,please contact Knoll CustomProduct Development for assistance.
Currents
47
Ser
vice
Wal
lsan
dco
mpo
nent
s
Panel system starters for Dividends HorizonDividends Horizon panel and screen starters
description application h w d pattern no. list
Service Wall starters for DividendsHorizon panels and screens
36� high Dividends Horizon Panel or Screen 36� 1� 3� AA1DHPS36(5)( ) $356.42� high Dividends Horizon Panel or Screen 42� 1� 3� AA1DHPS42(5)( ) 356.50� high Dividends Horizon Panel or Screen 50� 1� 3� AA1DHPS50(5)( ) 356.57� high Dividends Horizon Panel or Screen 57� 1� 3� AA1DHPS57(5)( ) 356.64� high Dividends Horizon Panel or Screen 64� 1� 3� AA1DHPS64(5)( ) 356.
Top clip for Dividends Horizonpanels and screens to lowerService Wall
Top clip for Dividends Horizon Panel/Screen toService Wall
AA1DHTC( ) 93.
Order Code
Example: AA1 DHPS 36 (5)
AA1 AccessoryDH Dividends HorizonPS Panel starter36 Panel height5 Top cap type613 Painted finish
Specification Information
1.Top cap type5=Metal flat
2.Paint finishAll standard paint finishes
Application Notes
Panel/screen starter includes aclamp bracket that attaches to thestructural base cover of the ServiceWall to start a Dividendspanel/screen run perpendicular tothe face of the Service Wallanywhere other than at the end ofthe Service Wall.
Top clip, which secures top edge ofpanel to underside of Service Wallcrown, is required in addition topanel starter for stability of 57� orhigher panels or 50�H panels withcantilevered shelves overheadstorage.
Currents
48
Power, data and communications components forService Walls2+2 racewayoutlet module, central switch and outlets
description type w d h pattern no. black
orange (-O)or orange
triangle (-T) no finish
Desk height outlet module 21-48�H 5� – 6� AR1 EOM $191.
Central switch 21-48�H AR1-ELS-B 533.
Duplex outlet Circuit A AR1 DA 46.Circuit A, with controlled symbol AR1 DAC 46.Circuit B AR1 DB 46.Circuit B, with controlled symbol AR1 DBC 46.Circuit X AR1 DX 46. 51.Circuit X, with controlled symbol AR1 DXC 46.Circuit Y AR1 DY 46. 51.Circuit Y, with controlled symbol AR1 DYC 46.
Order Code
Example: AR1 EOM
AR1 RacewayE 2+2OM Outlet module
Specification Information
Raceway components distribute four20-amp circuits at desk height orservice wall base: two conveniencecircuits and two protected circuits,with separate grounds and heavyduty #10 neutrals.
Application Notes
Service Wall power may bedistributed point-to-point betweenoutlet modules at desk height or inthe base raceway.
Outlet housings and power railsaccept two duplex outlets on eachface and four connector/jumpercables.
Modular desk-height outlet modulemounts between frame studs at anyheight from 21� - 48�, above orbelow adjacent worksurfaces. Each12�W frame bay can accept twooutlet housings (up to four duplexoutlets on each side.)
Central switch controls three outletsinside Service Wall frame for task orambient lights. Switch occupiesright-hand outlet opening in outletscover on one side of Service Wall.
Switches cannot be positionedback-to-back in combination withan outlet module.
Central switch includes whiterocker switch, connector to adjacentoutlet module, and three simplexoutlets on circuit B (2+2 or 3+3).
Outlet modules and power railsaccept two duplex outlets on eachface. Specify outlets with black facefor convenience circuits. Specifyorange face or black with orangetriangle for protected circuits withseparate ground and neutral inbuilding power supply.
Currents
49
Ser
vice
Wal
lsan
dco
mpo
nent
s
Power, data and communications components forService Walls2+2 racewayother hardware
description type w d h pattern no. no finish
Power infeeds, modular Base power 49� AR1 EPI2 $182.Desk height power 85� AR1 EPI5 220.Ceiling infeed 145� AR1 EPIC 275.
Hardwire base infeeds (NYC) One connector AR1 EPH1 366.Two connectors AR1 EPH2 549.
Transitional connectors for Morrison or Reff 12� 61� AR1 ET1 203.36� 85� AR1 ET3 256.60� 109� AR1 ET5 293.96� 133� AR1 ET8 326.
Jumper cable 12� wall/36� desk 37� AR1 EJ1 110.24� wall/48� desk 49� AR1 EJ2 145.36� wall/60� desk 61� AR1 EJ3 167.48� wall/72� desk 73� AR1 EJ4 180.60� wall/84� desk 85� AR1 EJ5 203.72� wall/96� desk 97� AR1 EJ6 220.96� wall/120� desk 121� AR1 EJ8 256.120� wall/144� desk 145� AR1 EJ10 292.144� wall 169� AR1 EJ12 326.
Order Code
Example: AR1 ET1
AR1 RacewayE 2+2T Transitional1 Length
Specification Information
Raceway components distribute four20-amp circuits at desk height orpanel base: two conveniencecircuits and two protected circuits,with separate grounds and heavyduty #10 neutrals.
NOTE: The City of New York doesnot approve use of liquid-tightPVC conduit. For installationsanywhere in the City of New York,specify NYC infeed kits (AR1EPH1or 2, AR1 TPH1 or 2), whichdo not contain PVC. To connectpower from the Service Wall towall-started panels: specifystandard (not transitional) jumpercables. Also specify Raceway CableManagers (AR1 RCM) to supportpower jumpers within the ServiceWall base between the base ordesk-height power module and theattached panel.
Application Notes
Desk height power infeed connectsfrom floor box to desk height outletsmodule inside Service Wall.
Ceiling infeed connects from ceilingjunction box to desk height outletmodule or to base power rail.Specify Currents ceiling infeedpanel separately.
Base power infeed connectsbuilding power to either end of baseraceway power rail.
Hardwire base infeed is approvedfor City of New York installations.Infeed includes junction box forbase raceway and connector to deskheight outlet module, or twoconnectors to adjacent base racewaypower rails.
Transitional connectors connectService Wall power components topowered Morrison or Reff panels orMorrison Network desks.Application dimension indicatesdistance
from Service Wall desk-height outletmodule to perpendicular panel withpowered base.
Specify jumper cables betweenoutlet modules. Applicationdimension indicates maximumService Wall cover width betweenoutlets covers at the same height.Excess cable may be stored ininterior of wall frame.
Base raceway power rail issuspended between panel supports3� above floor. 48� Service Wallaccepts one 12� rail, 60� ServiceWall accepts one 24� rail, 72�accepts two 12� rails. 12� rails mayalso be inserted at any straightconnection.
Specify 12� base power connectorbetween 12� rails in a 72�W ServiceWall base, or straddling a ServiceWall connection. Specify 36� basepower connector to pass through aconnection between adjacentpowered bases.
Currents
50
Power, data and communications components forService Walls2+2 racewayother hardware
description type w d h pattern no. no finish
Base raceway power rail 48� or 72� frame 12� – 2� AR1 E2 $203.60� frame 24� – 2� AR1 E3 239.
Base power connector Within a frame 12� AR1 EPC1 92.Frame to frame 36� AR1 EPC2 110.
Order Code
Example: AR1 ET1
AR1 RacewayE 2+2T Transitional1 Length
Specification Information
Raceway components distribute four20-amp circuits at desk height orpanel base: two conveniencecircuits and two protected circuits,with separate grounds and heavyduty #10 neutrals.
NOTE: The City of New York doesnot approve use of liquid-tightPVC conduit. For installationsanywhere in the City of New York,specify NYC infeed kits (AR1EPH1or 2, AR1 TPH1 or 2), whichdo not contain PVC. To connectpower from the Service Wall towall-started panels: specifystandard (not transitional) jumpercables. Also specify Raceway CableManagers (AR1 RCM) to supportpower jumpers within the ServiceWall base between the base ordesk-height power module and theattached panel.
Application Notes
Desk height power infeed connectsfrom floor box to desk height outletsmodule inside Service Wall.
Ceiling infeed connects from ceilingjunction box to desk height outletmodule or to base power rail.Specify Currents ceiling infeedpanel separately.
Base power infeed connectsbuilding power to either end of baseraceway power rail.
Hardwire base infeed is approvedfor City of New York installations.Infeed includes junction box forbase raceway and connector to deskheight outlet module, or twoconnectors to adjacent base racewaypower rails.
Transitional connectors connectService Wall power components topowered Morrison or Reff panels orMorrison Network desks.Application dimension indicatesdistance
from Service Wall desk-height outletmodule to perpendicular panel withpowered base.
Specify jumper cables betweenoutlet modules. Applicationdimension indicates maximumService Wall cover width betweenoutlets covers at the same height.Excess cable may be stored ininterior of wall frame.
Base raceway power rail issuspended between panel supports3� above floor. 48� Service Wallaccepts one 12� rail, 60� ServiceWall accepts one 24� rail, 72�accepts two 12� rails. 12� rails mayalso be inserted at any straightconnection.
Specify 12� base power connectorbetween 12� rails in a 72�W ServiceWall base, or straddling a ServiceWall connection. Specify 36� basepower connector to pass through aconnection between adjacentpowered bases.
Currents
51
Ser
vice
Wal
lsan
dco
mpo
nent
s
Power, data and communications components forService Walls3+3 racewayoutlet module, central switch and outlets
description type w d h pattern no. black
orange (-O)or orange
triangle (-T) no finish
Desk-height outlet module 21�-48�H 6� 1� 9� AR1 TOM $220.
Central switch 21-48�H AR1-ELS-B 533.
Duplex outlet Circuit A AR1 DA 46.Circuit A, with controlled symbol AR1 DAC 46.Circuit B AR1 DB 46.Circuit B, with controlled symbol AR1 DBC 46.Circuit C AR1 DC 46.Circuit C, with controlled symbol AR1 DCC 46.Circuit X AR1 DX 46. 51.Circuit X, with controlled symbol AR1 DXC 46.Circuit Y AR1 DY 46. 51.Circuit Y, with controlled symbol AR1 DYC 46.Circuit Z AR1 DZ 46. 51.Circuit Z, with controlled symbol AR1 DZC 46.
Order Code
Example: AR1 TOM
AR1 RacewayT 3+3OM Outlet Module
Specification Information
Raceway components distribute six20-amp circuits at desk height orwall base: three conveniencecircuits and three protected circuits,with separate grounds andheavy-duty #10 neutrals.
Application Notes
Service Wall power may bedistributed point-to-point betweenoutlet modules at desk height or inthe base raceway. Outlet modulesand power rails accept two duplexoutlets on each face and fourconnector/jumper cables.
Modular desk-height outlet modulemounts between frame studs at anyheight from 21� - 48�, above orbelow adjacent worksurfaces. Each12�W frame bay can accept twooutlet housings (up to four duplexoutlets on each side.)
Central switch controls three outletsinside Service Wall frame for task orambient lights. Switch occupiesright-hand outlet opening in outletscover on one side of wall.
Central switch includes whiterocker switch, connector to adjacentoutlet module, and three simplexoutlets on circuit B (2+2 or 3+3).
Outlet modules and power railsaccept two duplex outlets on eachface. Specify outlets with black facefor convenience circuits. Specifyorange face or black with orangetriangle for protected circuits withseparate ground and neutral inbuilding power supply.
Currents
52
Power, data and communications components forService Walls3+3 racewayother hardware
description type w d h pattern no. no finish
Power infeeds Base power 49� AR1 TPI2 $220.Desk height power 85� AR1 TPI5 256.Ceiling infeed 145� AR1 TPIC 313.
Hardwire base infeeds (NYC) One connector AR1 TPH1 404.Two connectors AR1 TPH2 625.
Jumper cable 12� wall/36� desk 37� AR1 TJ1 126.24� wall/48� desk 49� AR1 TJ2 167.36� wall/60� desk 61� AR1 TJ3 203.48� wall/72� desk 73� AR1 TJ4 220.60� wall/84� desk 85� AR1 TJ5 239.72� wall/96� desk 97� AR1 TJ6 256.96� wall/120� desk 121� AR1 TJ8 292.120� wall/144� desk 145� AR1 TJ10 326.144� wall 169� AR1 TJ12 365.
Transitional connectors for Morrison or Reff 12� 61� AR1 TT1 239.36� 85� AR1 TT3 293.60� 109� AR1 TT5 326.96� 133� AR1 TT8 366.
Base raceway power rail 48� or 72� frame 12� AR1 T2 239.60� frame 24� AR1 T3 275.
Base power connectors Within a frame 13� AR1 TPC1 110.Frame to frame 37� AR1 TPC2 126.
Order Code
Example: AR1 TT5
AR1 RacewayT 3+3T Transitional5 Length
Specification Information
Raceway components distribute six20-amp circuits at desk height orwall base: three conveniencecircuits and three protected circuits,with separate grounds andheavy-duty #10 neutrals.
NOTE: The City of New York doesnot approve use of liquid-tightPVC conduit. For installationsanywhere in the City of New York,specify NYC infeed kits (AR1EPH1or 2, AR1 TPH1 or 2), whichdo not contain PVC. To connectpower from the Service Wall towall-started panels: specifystandard (not transitional) jumpercables. Also specify Raceway CableManagers (AR1 RCM) to supportpower jumpers within the ServiceWall base between the base ordesk-height power module and theattached panel.
Application Notes
Desk height power infeed connectsfrom floor box to desk height outletsmodule inside Service Wall.
Ceiling infeed connects from ceilingjunction box to desk height outletmodule or to base power rail.Specify Currents ceiling infeedpanel separately.
Base power infeed connectsbuilding power to either end of baseraceway power rail.
Hardwire base infeed is approvedfor City of New York installations.Infeed includes junction box forbase raceway and connector to deskheight outlet module, or twoconnectors to adjacent base racewaypower rails.
Transitional connectors connectCurrents Service Wall powercomponents to powered Morrison orReff panels or Morrison Networkdesks.
Application dimension indicatesdistance from Service Wall outletmodule to perpendicular panel.
Specify jumper cables betweenoutlet modules. Applicationdimension indicates maximum wallcover width between outlets coversat the same height. Excess cablemay be stored in interior of ServiceWall frame.
Base raceway power rail issuspended between panel supports3� above floor. 48� Service Wallaccepts one 12� rail, 60� ServiceWall accepts one 24� rail, 72�accepts two 12� rails. 12� rails mayalso be inserted at any straightconnection.
Specify 12� base power connectorbetween 12� rails in a 72�W ServiceWall base, or straddling a ServiceWall connection. Specify 36� basepower connector to pass through aconnection between adjacentpowered bases.
Currents
53
Ser
vice
Wal
lsan
dco
mpo
nent
s
Power, data and communications components forService Wallsreplacement components for Equity
description type w d h pattern no. no finish black
orange (-O)or orange
triangle (-T)
Replacement duplexes for Equity Circuit A ARE1 DA $46.Circuit B ARE1 DB 46.Circuit C ARE1 DC 46.Circuit X ARE1 DX 46.Circuit X, orange face or orange triangle ARE1 DX (O or T) 51.Circuit Y ARE1 DY 46.Circuit Y, orange face or orange triangle ARE1 DY (O or T) 51.Circuit Z ARE1 DZ 46.Circuit Z, orange face or orange triangle ARE1 DZ (O or T) 51.
Transitional power connector Equity 2+2 12� 61� ARE1 ET1 203.36� 85� ARE1 ET3 256.60� 109� ARE1 ET5 293.
Transitional power connector Equity 3+3 12� 61� ARE1 TT1 239.36� 85� ARE1 TT3 293.60� 109� ARE1 TT5 326.
Replacement power infeed, Equity panel 2+2 ARE1 EP1 301.3+3 ARE1 TP1 349.
Order Code
Example: ARE1 ET3
ARE1 Currents/Equity racewayE Eight wire 2+2T Transitional connector3 Width
Specification Information Application Notes
Replacement duplexes for Equityconvert existing 3+1 terminalblocks in Equity panels to 2+2 whenconnected to and supplied byService Wall 2+2 or 3+3 power.
Transitional power connectorconnects Service Wall powercomponents to Equity panel basepower.
Application dimension indicatesdistance between Service Walloutlet module (at 30�-39�H) andperpendicular panel.
Specify replacement power infeedwhen supplying power to ServiceWall from Equity panel base infeed.
Currents
54
Power, data and communications components forService Wallsaccessories, ceiling infeed panel
description w d h pattern no. no finish paint
Cable clips for wall studs (100) 1/4� 1/2� 11/2� AR1 PCC 100 $92.
High capacity cable holders (10) 1� 3/4� 21/2� AR1 HCC H10 38.
Raceway cable managers (10) AR1 RCM 10 74.
Ceiling infeed panel for stabilizer end cabinet,T-end or power monument
31/2� 5� 48� APX CIP4 ( ) 560.31/2� 5� 72� APX CIP6 ( ) 655.31/2� 5� 96� APX CIP8 ( ) 748.
Order Code
Example: AR1 PCC 100
AR1 RacewayPCC Cable clip100 Size/Quantity
Specification Information
Cable clips and cable managers areblack plastic.
Cable holders are light grey plastic.
Specify painted finish for hardwireoutlets cover or ceiling infeed panel.
High capacity cable holders may notbe used in conjunction withAutoStrada access covers.
Application Notes
Specify cable clips, approximately50 per wall frame to support andmanage cables on the face of studsin the Service Wall frame. Each clipmanages up to 14 Category 5 orfiber optic cables; four clips attachbetween 21�-30�, 30�-39�, 39�-48�;six between 48�-64�H. Only twoclips fit behind a cable tray cover atthe 21�-30� height.
Specify high capacity cable holdersapproximately 20 per Service Wallframe to support and manage largerbundles of cables. Each holds up to55 Cat 5 cables; two holders attachto studs at each 9� level; threeholders at the 16� level of a 64�HService Wall. Only one holder fitsbehind a cable tray cover at the21�-30� height (upside down).
Raceway cable managers areU-shape cable supports that snapinto the underside of the ServiceWall frame. Plan one per foot tocontain data cables or powerjumpers in the base raceway.
Ceiling infeed panel attaches to endof Service Wall adjacent to Currents,Morrison, or Reff T-end panel with31/2� extension, or to powermonument. Center channel, 2� x21/2�, accommodates one or twopower infeed cables. Each sidechannel is 11/2� x 31/2� lay-in cableraceway, for continuous lay-incabling from ceiling to Service Wallsurface.
Specify ceiling infeed separately.
Currents
55
Ser
vice
Wal
lsan
dco
mpo
nent
s
Power, data and communications components forService WallsPDC modules, modular communications
description type application pattern no. black
PDC Module accessories PDC Module extender (set of 10) MR3 PDCX $211.
AMP PDC Modules Faceplate and 4 Enhanced Category 5 outlets AMC PDC 5E4N 246.
AMP Modular components Blank insert (10) AMC B10 29.Category 3 outlet (RJ11 six position) Punch-down back AMC O3 29.Category 6 quantum (RJ45, 110) Punch-down back AMC O6 58.Communications faceplates AMP outlet faceplate, 2-port AMC FP2 (L or N) 29.Communications faceplates AMP outlet faceplate, 3-port AMC FP3 (L or N) 29.Enhanced Category 5 outlet (RJ45, 110) Punch-down back AMC O5E 39.Fiber optics outlet 50/125 micron fiber jack AMC OF500 197.Fiber optics outlet 62.5/125 micron fiber jack AMC OF625 197.
AMP modular communications/ zone distribution AMP NetConnect consolidation point, 12-port AMC5 CP12 777.AMP NetConnect mounting bracket AMB CP12-AMP 51.AMP pre-terminated outlet cable, 20� AMC5 OC20(A or B) 98.AMP pre-terminated outlet cable, 30� AMC5 OC30(A or B) 110.AMP pre-terminated outlet cable, 40� AMC5 OC40(A or B) 118.AMP pre-terminated outlet cable, 50� AMC5 OC50(A or B) 125.
Lucent zone distribution Hinged mounting brackets for 24-portconsolidation point (pair)
AMB CP24 LUC 142.
Outlet fillers (Set of 10) AR OF 40.
Order Code
Example: MR3 AMP3B
MR3 Raceway/PDCAMP Type3B Configuration
Specification Information
For AMP pre-terminated outletcables specify:
T568A or T568B wiring.
For AMP outlet faceplates specify:L Light greyN Black
Amp outlets are black.Lucentfaceplates are light grey.
Application Notes
PDC Modules are preconfigured orcreated from modular componentsand faceplate that snaps intoService Wall outlets cover, racewaycover.
See Morrison price list foradditional PDC moduleconfigurations.
Specify PDC Module extendersfor adequate clearance betweenmodules in back-to-backapplications, or for fiber optics STconnectors.
Specify blank filler plates for anyunused outlet openings in outletscovers or raceway covers.
AMP NetConnect mounting bracketsupports one 12-port consolidationpoint on stud or two in stabilizer endcabinet.
AMP pre-terminated outlet cablesinclude outlet and plug intoconsolidaion point. AMP outletfaceplate snaps into outlets coverand supports cable outlet.
Each Lucent mounting bracketsupports one 24-port consolidationpoint and is hinged for easy access.Bracket mounts on Service Wallframe or stabilizer end cabinet.
Currents
56
Linkable screensglazed and translucent
description type w d h pattern no.glazedG(C/T)
Linkable screens 39�H 24� 2� 39� AP1 3924( )( )( ) $990.36� 2� 39� AP1 3936( )( )( ) 1,189.48� 2� 39� AP1 3948( )( )( ) 1,429.
48�H 18� 2� 48� AP1 4818( )( )( ) 989.24� 2� 48� AP1 4824( )( )( ) 1,091.30� 2� 48� AP1 4830( )( )( ) 1,211.36� 2� 48� AP1 4836( )( )( ) 1,309.42� 2� 48� AP1 4842( )( )( ) 1,459.48� 2� 48� AP1 4848( )( )( ) 1,572.
64�H 18� 2� 64� AP1 6418( )( )( ) 1,152.24� 2� 64� AP1 6424( )( )( ) 1,292.30� 2� 64� AP1 6430( )( )( ) 1,411.36� 2� 64� AP1 6436( )( )( ) 1,552.42� 2� 64� AP1 6442( )( )( ) 1,673.48� 2� 64� AP1 6448( )( )( ) 1,856.
Order Code
Example: AP1 3924 GT 612 813
AP1 Currents screen39 Height24 WidthG Surface typeT Surface finish612 Frame finish813 Trim color
Specification Information
Surface types:G Glazed
For glazed panels specify:C Clear tempered glassT Acid etched tempered glass
Specify painted finish for glazedpanel frame.
Specify trim grey or easy greyintegral color for top cap.
Linkable screen legs are trim grey.
Application Notes
Linkable screens divideworkstations perpendicular toService Wall where base raceway isnot required. Linkable screensconnect with standardMorrison/Currents wall starters andCurrents linkable screenconnectors.
Screens are supported by two legswith leveling glides and includeCurrents top cap. Specifyconnectors separately.
Glazed linkable screens useMorrison glazed panel construction.
Currents
57
Scr
eens
and
add-
uppa
nels
Linkable screensupholstered
description type w d h pattern no. 10 15 20 30 35 40 45 50 55
Screens 39�H 18� 21/4� 39� AP1 3918 N( )( ) $346. $384. $402. $462. $480. $506. $560. $588. $616.24� 21/4� 39� AP1 3924 N( )( ) 392. 432. 458. 520. 542. 574. 634. 666. 698.30� 21/4� 39� AP1 3930 N( )( ) 422. 470. 492. 564. 588. 626. 684. 724. 756.36� 21/4� 39� AP1 3936 N( )( ) 472. 524. 552. 630. 656. 694. 766. 806. 842.42� 21/4� 39� AP1 3942 N( )( ) 530. 590. 626. 712. 738. 788. 868. 908. 954.48� 21/4� 39� AP1 3948 N( )( ) 580. 642. 674. 770. 804. 852. 940. 988. 1,038.60� 21/4� 39� AP1 3960 N( )( ) 674. 746. 786. 894. 932. 992. 1,094. n/a n/a
48�H 18� 21/4� 48� AP1 4818 N( )( ) 404. 452. 472. 540. 560. 596. 658. 688. 726.24� 21/4� 48� AP1 4824 N( )( ) 460. 506. 534. 608. 636. 676. 742. 776. 820.30� 21/4� 48� AP1 4830 N( )( ) 496. 554. 582. 664. 690. 734. 808. 844. 890.36� 21/4� 48� AP1 4836 N( )( ) 558. 622. 650. 742. 770. 822. 904. 950. 994.42� 21/4� 48� AP1 4842 N( )( ) 628. 694. 730. 836. 874. 926. 1,018. 1,068. 1,124.48� 21/4� 48� AP1 4848 N( )( ) 680. 756. 798. 908. 946. 1,008. 1,108. 1,162. 1,222.60� 21/4� 48� AP1 4860 N( )( ) 796. 882. 926. 1,060. 1,100. 1,168. 1,290. n/a n/a
64�H 18� 21/4� 64� AP1 6418 A( )( ) 524. 586. 612. 700. 730. 772. 850. 894. 940.24� 21/4� 64� AP1 6424 A( )( ) 580. 642. 674. 770. 804. 852. 940. 988. 1,036.30� 21/4� 64� AP1 6430 A( )( ) 650. 724. 758. 870. 904. 960. 1,060. 1,108. 1,162.36� 21/4� 64� AP1 6436 A( )( ) 702. 782. 822. 938. 980. 1,038. 1,144. 1,200. 1,262.42� 21/4� 64� AP1 6442 A( )( ) 772. 862. 904. 1,034. 1,078. 1,148. 1,262. 1,326. 1,390.48� 21/4� 64� AP1 6448 A( )( ) 832. 922. 966. 1,104. 1,154. 1,226. 1,348. 1,416. 1,484.60� 21/4� 64� AP1 6460 A( )( ) 940. 1,044. 1,096. 1,254. 1,306. 1,388. 1,528. n/a n/a
Order Code
Example: AP1 3924 N15 813
AP1 Currents screen39 Height24 WidthN Surface type15 Fabric group813 Trim color
Specification Information
Surface types:N UpholsteredA High performance acoustical
upholsteredSpecify fabric group:10 Fabric group 1015 Fabric group 1520 Fabric group 2030 Fabric group 3035 Fabric group 3540 Fabric group 4045 Fabric group 4550 Fabric group 5055 Fabric group 55
Specify trim grey or easy greyintegral color for top cap.
Linkable screen legs are trim grey.
Application Notes
Linkable screens divideworkstations perpendicular toService Wall where base raceway isnot required. Linkable screensconnect with standardMorrison/Currents wall starters andCurrents linkable screenconnectors.
Screens are supported by two legswith leveling glides and includeCurrents top cap. Specifyconnectors separately.
Upholstered 39� and 48� screensuse Morrison Options panelconstruction. Upholstered 64�screens use high performanceacoustical Morrison panelconstruction.
Currents
58
Linkable screensmarker surface both sides
description type w d h pattern no. list price
Linkable screens 48�H 24� 21/8� 48� AP1 4824M( ) $784.30� 21/8� 48� AP1 4830M( ) 843.36� 21/8� 48� AP1 4836M( ) 931.42� 21/8� 48� AP1 4842M( ) 1,043.48� 21/8� 48� AP1 4848M( ) 1,167.
64�H 24� 21/8� 64� AP1 6424M( ) 889.30� 21/8� 64� AP1 6430M( ) 1,009.36� 21/8� 64� AP1 6436M( ) 1,145.42� 21/8� 64� AP1 6442M( ) 1,272.48� 21/8� 64� AP1 6448M( ) 1,420.
Order Code
Example: AP1 4824M 813
AP1 Currents screen48 Height24 WidthM Surface type813 Trim color
Specification Information
Surface types:M Marker surface
Specify trim grey or easy greyintegral color for top cap.
Linkable screen legs are trim grey.
Application Notes
Linkable screens divideworkstations perpendicular toService Wall where base raceway isnot required. Linkable screensconnect with standardMorrison/Currents wall starters andCurrents linkable screenconnectors.
Screens are supported by two legswith leveling glides and includeCurrents top cap. Specifyconnectors separately.
Marker surface linkable screens useMorrison veneer panel construction.
Currents
59
Scr
eens
and
add-
uppa
nels
Linkable screensmarker/upholstered combination
description type w d h pattern no. 10 15 20 30 35 40 45 50 55
Linkable screens 48�H 24� 21/8� 48� AP1 4824M( )( ) $729. $763. $777. $825. $839. $865. $906. $925. $954.30� 21/8� 48� AP1 4830M( )( ) 793. 822. 837. 890. 904. 929. 981. 1,001. 1,037.36� 21/8� 48� AP1 4836M( )( ) 873. 909. 920. 981. 994. 1,033. 1,083. 1,112. 1,150.42� 21/8� 48� AP1 4842M( )( ) 985. 1,023. 1,036. 1,106. 1,120. 1,158. 1,218. 1,245. 1,292.48� 21/8� 48� AP1 4848M( )( ) 1,089. 1,129. 1,147. 1,219. 1,247. 1,300. 1,344. 1,380. 1,427.
64�H 24� 21/8� 64� AP1 6424M( )( ) 858. 908. 919. 983. 1,009. 1,057. 1,111. 1,132. 1,175.30� 21/8� 64� AP1 6430M( )( ) 962. 1,022. 1,031. 1,106. 1,129. 1,177. 1,229. 1,260. 1,302.36� 21/8� 64� AP1 6436M( )( ) 1,070. 1,129. 1,150. 1,220. 1,253. 1,310. 1,358. 1,395. 1,441.42� 21/8� 64� AP1 6442M( )( ) 1,172. 1,252. 1,268. 1,351. 1,380. 1,429. 1,488. 1,527. 1,581.48� 21/8� 64� AP1 6448M( )( ) 1,339. 1,421. 1,440. 1,526. 1,560. 1,618. 1,693. 1,735. 1,791.
Order Code
Example: AP1 4824M20 813
AP1 Currents screen48 Height24 WidthM Surface type20 Fabric group813 Trim color
Specification Information
Specify fabric group:10 Fabric group 1015 Fabric group 1520 Fabric group 2030 Fabric group 3035 Fabric group 3540 Fabric group 4045 Fabric group 4550 Fabric group 5055 Fabric group 55
Specify trim grey or easy greyintegral color for top cap.
Linkable screen legs are trim grey.
Application Notes
Linkable screens divideworkstations perpendicular toService Wall where base raceway isnot required. Linkable screensconnect with standardMorrison/Currents wall starters andCurrents linkable screenconnectors.
Screens are supported by two legswith leveling glides and includeCurrents top cap. Specifyconnectors separately.
Combination upholstered screensuse Morrison veneer/combinationpanel construction.
Currents
60
Linkable screenstrim
description type w d h pattern no. price
End trim, linkable screens (no connector) 39� screen – 2� 39� AA139E( ) $49.48� screen – 2� 48� AA148E( ) 51.64� screen – 2� 64� AA164E( ) 53.
Raceway cover for Currents end connector or endtrim on Morrison panel
AA1RE( ) 35.
Top trim, linkable screens (replacement part) 6� 2� – AA1T06( ) 9.18� 2� – AA1T18( ) 12.24� 2� – AA1T24( ) 15.30� 2� – AA1T30( ) 28.36� 2� – AA1T36( ) 30.42� 2� – AA1T42( ) 31.48� 2� – AA1T48( ) 33.60� 2� – AA1T60( ) 36.
Linkable screen feet, pair (replacement part) AP1 LF 69.
Carpet grips (set of 10) MM2-CG 31.
Non-skid pads (set of 10) AA1NSK 41.
Screen starter 4� 1� 16� AA1B( ) 172.
Order Code
Example: AA1 T06 813
AA1 T Top trim, panel06 Width813 Trim color
Specification Information
Specify painted finish for racewaycover for Currents end connector.
Specify trim grey or easy greyintegral color for end trim and toptrim.
Linkable screen legs are trim grey.
Application Notes
End trim is economical vertical trimcover for linkable screen where noend connector (or cantilever track)is required. End trim includes topcap.
Raceway cover encloses end ofMorrison panel raceway underCurrents end trim or end connector.
Top trim corresponds in width tolinkable screens or Morrison panels.No Currents top trim is available forMorrison connectors (specifylinkable screen connectors).
Top caps are included with Currentsscreen connectors.
Linkable screen feet may be orderedto convert Morrison panels withraceway to Currents linkablescreens.
Specify screen starter to connectWall-connected screenperpendicular to Service Wall face.Clamp bracket attachesWall-connected screen anywherealong structural base. Outsidesurface of screen at end of Wall willbe approximately 1� from end.
No screen starter is needed to attachService Wall-connected screen tocorresponding height CurrentsT-end at end of spine.
Screen-to-worksurface bracketstabilizes Wall-connected screen byattaching to underside ofworksurface at any height.
Specify left or right end ofworksurface.
Currents
61
Scr
eens
and
add-
uppa
nels
Linkable screenstrim
description type w d h pattern no. price
Screen-to-worksurface bracket AFWB $92.
Order Code
Example: AA1 T06 813
AA1 T Top trim, panel06 Width813 Trim color
Specification Information
Specify painted finish for racewaycover for Currents end connector.
Specify trim grey or easy greyintegral color for end trim and toptrim.
Linkable screen legs are trim grey.
Application Notes
End trim is economical vertical trimcover for linkable screen where noend connector (or cantilever track)is required. End trim includes topcap.
Raceway cover encloses end ofMorrison panel raceway underCurrents end trim or end connector.
Top trim corresponds in width tolinkable screens or Morrison panels.No Currents top trim is available forMorrison connectors (specifylinkable screen connectors).
Top caps are included with Currentsscreen connectors.
Linkable screen feet may be orderedto convert Morrison panels withraceway to Currents linkablescreens.
Specify screen starter to connectWall-connected screenperpendicular to Service Wall face.Clamp bracket attachesWall-connected screen anywherealong structural base. Outsidesurface of screen at end of Wall willbe approximately 1� from end.
No screen starter is needed to attachService Wall-connected screen tocorresponding height CurrentsT-end at end of spine.
Screen-to-worksurface bracketstabilizes Wall-connected screen byattaching to underside ofworksurface at any height.
Specify left or right end ofworksurface.
Currents
62
Linkable screens90° and end connectors
description type w d h pattern no. no finish trim grey
Connector track No trim – – 39� MC1-39S1 $70.No trim – – 48� MC1-48S1 80.No trim – – 64� MC1-64S1 85.
90° 2-way L 2� 2� 39� AC1 39L2( ) 179.2� 2� 48� AC1 48L2( ) 189.2� 2� 64� AC1 64L2( ) 204.
90° 3-way T 21/4� 2� 39� AC1 39T3( ) 228.21/4� 2� 48� AC1 48T3( ) 240.21/4� 2� 64� AC1 64T3( ) 257.
90° 4-way X 21/4� 21/4� 39� AC1 39X4( ) 267.21/4� 21/4� 48� AC1 48X4( ) 296.21/4� 21/4� 64� AC1 64X4( ) 330.
End connector (with connector track) 1� 2� 39� AC1 39E1( ) 80.1� 2� 48� AC1 48E1( ) 84.1� 2� 64� AC1 64E1( ) 95.
Order Code
Example: AC1 39L2 813
AC1 Linkable screenconnector
39 HeightL2 90° 2-way L813 Trim color
Specification Information
Specify trim grey or easy greyintegral color for top and verticaltrim.
Connector post is painted blackextrusion.
Carpet grips are black integral colorsurface.
Application Notes
Connectors join linkable screens orMorrison panels in straight, 90° or120° post configurations.
Linkable screen connectors includeconnector tracks, universal postsand top and vertical trim (whererequired).
Connector tracks have cantileverslots for worksurface and storagesupport.
L, T and X connectors include auniversal post and 2, 3 or 4connector tracks and top cap.
End trim may be specified insteadof an end connector if cantilevercapability is not required.
Carpet grips snap into linkablescreen glides to prevent componentsfrom sliding. Glide rotates in carpetgrip to permit levelling.
Non-skid grips snap into glides toprevent sliding on hard surfacefloors.
Currents
63
Scr
eens
and
add-
uppa
nels
Linkable screens120° connectors
description h pattern no. list price
120°, 2-way 39� AC1 39V2( ) $199.48� AC1 48V2( ) 208.64� AC1 64V2( ) 227.
120°, 3-way 39� AC1 39Y3( ) 243.48� AC1 48Y3( ) 253.64� AC1 64Y3( ) 271.
Order Code
Example: AC1 39V2 813
AC1 Linkable screenconnector
39 HeightV2 120° 2-way813 Trim color
Specification Information
Specify trim grey or easy greyintegral color for top and verticaltrim.
Connector post is painted blackextrusion.
Carpet grips are black integral colorsurface.
Application Information
Connectors join linkable screens orMorrison panels in straight, 90° or120° post configurations.
The connectors include connectortracks, a triangular post and top andvertical trim (where required).
Currents
64
Mobile screensupholstered surfaces
description type w d h pattern no. 10 15 20 30 35 40 45 50 55
Mobile screen, upholstered 48�H 48� 2� 48� AF 4848 AM ( )( ) $1,766. $1,817. $1,864. $1,965. $2,013. $2,064. $2,112. $2,213. $2,312.60� 2� 48� AF 4860 AM ( )( ) 1,929. 1,978. 2,033. 2,134. 2,180. 2,229. 2,278. 2,378. 2,476.
64�H 48� 2� 64� AF 6448 AM ( )( ) 1,917. 1,978. 2,047. 2,180. 2,244. 2,312. 2,378. 2,508. 2,641.60� 2� 64� AF 6460 AM ( )( ) 2,244. 2,312. 2,378. 2,508. 2,576. 2,641. 2,706. 2,839. 2,975.
Order Code
Example: AF 4872 TCM 612
AF Screen48 Height72 WidthT Surface typeC Surface finishM Base type612 Base finish
Specification Information
Surface types:A Tackable upholstered
Surface finishes:C Crystal
Specify base finish.
Base type:M Mobile
Specify fabric group:10 Fabric group 1015 Fabric group 1520 Fabric group 2030 Fabric group 3035 Fabric group 3540 Fabric group 4050 Fabric group 5055 Fabric group 55
Application Notes
Upholstered screens are tackable,acoustical surface both sides.Continuous edge trim is trim grey.
The bottom 15� of upholsteredmobile screens consists ofsupporting ballast board and is nottackable area.
Mobile screens are supported bystabilizer feet.
Non-locking casters to meet BIFMAstability standards.
When ordering 60� wideupholstered screens, please checkwidth of fabric selected.
Currents
65
Scr
eens
and
add-
uppa
nels
Add-up panelsupholstered surfaceService Wall crown applications
description w d h pattern no. 10 15 20 30 35 40 45 50 55
12�H add-up panels 24� 2� 12� AU 1224 A ( ) $464. $484. $500. $534. $554. $570. $586. $624. $654.36� 2� 12� AU 1236 A ( ) 534. 554. 570. 604. 624. 638. 654. 688. 726.48� 2� 12� AU 1248 A ( ) 604. 624. 638. 672. 688. 706. 726. 758. 794.60� 2� 12� AU 1260 A ( ) 706. 726. 742. 776. 794. 810. 826. 862. 896.
21�H add-up panels 24� 2� 21� AU 2124 A ( ) 576. 604. 630. 678. 706. 732. 758. 810. 862.36� 2� 21� AU 2136 A ( ) 666. 688. 716. 764. 794. 820. 844. 896. 948.48� 2� 21� AU 2148 A ( ) 748. 776. 802. 850. 880. 904. 930. 982. 1,034.60� 2� 21� AU 2160 A ( ) 880. 904. 930. 982. 1,010. 1,034. 1,060. 1,112. 1,162.
28�H add-up panels 24� 2� 28� AU 2824 A ( ) 688. 726. 758. 826. 862. 896. 930. 998. 1,066.36� 2� 28� AU 2836 A ( ) 794. 826. 862. 930. 968. 998. 1,034. 1,100. 1,168.48� 2� 28� AU 2848 A ( ) 896. 930. 968. 1,034. 1,066. 1,100. 1,138. 1,206. 1,276.60� 2� 28� AU 2860 A ( ) 1,052. 1,084. 1,124. 1,190. 1,224. 1,260. 1,292. 1,364. 1,430.
Order Code
Example: AU 2848 A20
AU Add up panel28 Height48 WidthA Surface type20 Fabric group
Specification Information
Surface types:A Tackable upholsteredSpecify fabric group for upholsteredadd-up panels:10 Fabric group 1015 Fabric group 1520 Fabric group 2030 Fabric group 3035 Fabric group 3540 Fabric group 4045 Fabric group 4550 Fabric group 5055 Fabric group 55Edge trim is integral color trim greyfinish.
Specify wide add-up panels for useon long Service Wall and Fenceruns.
Application Notes
Add-up panels add visual andacoustical privacy above any heightService Wall. Bottom edge, withwedge-shape plugs, inserts in centerof crown at any point, regardless ofupmounted storage. Add-up panelsinclude continuous edge trim.
Upholstered add-up panels havebeen tested to NRC .60 and STC 21.
When ordering 60� wide panels,please check width of fabricselected.
Overall height of service wall with 4�standard crown and Add-up panels:Nominal Add-up Overallwall
heightheight height
39� 12� 55�39� 21� 64�39� 28� 71�48� 12� 64�48� 21� 73�48� 28� 80�64� 12� 80�64� 21� 89�64� 28� 96�
Currents
66
Add up glass panels, for spine
description type width depth height pattern numberclear
tempered powder
Add up panels frameless glass, 8�h 24� 1/2� 8� AUA1 0824 G ( )( ) $291. $355.36� 1/2� 8� AUA1 0836 G ( )( ) 331. 476.48� 1/2� 8� AUA1 0848 G ( )( ) 428. 593.60� 1/2� 8� AUA1 0860 G ( )( ) 527. 765.72� 1/2� 8� AUA1 0872 G ( )( ) 593. 923.
frameless glass, 12�h 24� 1/2� 12� AUA1 1224 G ( )( ) 349. 400.36� 1/2� 12� AUA1 1236 G ( )( ) 494. 566.48� 1/2� 12� AUA1 1248 G ( )( ) 629. 727.60� 1/2� 12� AUA1 1260 G ( )( ) 768. 888.72� 1/2� 12� AUA1 1272 G ( )( ) 910. 1,046.
frameless glass, 15�h 24� 1/2� 15� AUA1 1524 G ( )( ) 355. 624.36� 1/2� 15� AUA1 1536 G ( )( ) 494. 692.48� 1/2� 15� AUA1 1548 G ( )( ) 632. 994.60� 1/2� 15� AUA1 1560 G ( )( ) 778. 1,121.72� 1/2� 15� AUA1 1572 G ( )( ) 916. 1,312.
Order Code
Example: AUA1 1248 G TEMP AA
AUA1 Autostrada add up panel12 Height48 WidthG TypeTEMP Glass FinishAA Trim Finish
Specification Information
Add up type:G Glass
Glass add-ups are available with thefollowing glass options:TEMP Clear temperedGL13 Powder
Specify wide add-up panels for useon long Service Wall and Fenceruns.
Application Notes
Add-up panels add acousticalprivacy and light control above anyheight Service Wall.
Anodized aluminum or painted baseframe inserts in center of anyService Wall crown and is securedby bolts within crown.
Frameless glass add-ups can bepositioned at any 3� increment instandard or compact crown with anycover type.
Any height add up can be used onany height AutoStrada or CurrentsService Wall or Fence.• 8�h Add ups are designed
primarily for use on 39�h spinewith 1�h crown to create a 48�hhorizon.
• 12�h Add ups are designed foruse on 48�h spine for a 61�horizon with 1�h crown or a 64�horizon with 4�h crown.
• 15�h Add ups are designedprimarily for use on 48�h spinewith 1�h crown for a 64� horizon.
Currents
67
Scr
eens
and
add-
uppa
nels
Add-up panel connectors and fillersfield retrofit kits
description type pattern no. list price
Field Retrofit Trim Kit for non-stackable add-uppanels
12 x 24 AUA1224 n/c12 x 36 AUA1236 n/c12 x 48 AUA1248 n/c12 x 60 AUA1260 n/c12 x 72 AUA1272 n/c21 x 24 AUA2124 n/c21 x 36 AUA2136 n/c21 x 48 AUA2148 n/c21 x 60 AUA2160 n/c21 x 72 AUA2172 n/c28 x 24 AUA2824 n/c28 x 36 AUA2836 n/c28 x 48 AUA2848 n/c28 x 60 AUA2860 n/c28 x 72 AUA2872 n/c
Order Code
Example: AUA1224
AU Add-upA Type12 Height24 Width
Specification Information
Finish is trim grey.
Fillers require retrofitting add-uppanels with new trim.
Retrofit trim kits are no-charge (n/c)items specified separately.
Currents
68
Add-up panel connectors and fillersService Wall applications
description w d h pattern no. list price
Straight alignment clip 3� 2� – AU1 CS $12.
L connector add-up fillers 6� 6� 16� AU1 CL12 415.6� 6� 25� AU1 CL21 498.6� 6� 32� AU1 CL28 583.
T connector add-up fillers 6� 6� 16� AU1 CT12 415.6� 6� 25� AU1 CT21 498.6� 6� 32� AU1 CT28 583.
T-end 11/8� extension fillers 2� 11/8� 16� AU1 X112 250.2� 11/8� 25� AU1 X121 288.2� 11/8� 32� AU1 X128 330.
T-end 31/2� extension fillers 2� 31/2� 16� AU1 X312 330.2� 31/2� 25� AU1 X321 373.2� 31/2� 32� AU1 X328 415.
Order Code
Example: AU1 CL12
AU1 Add-upCL Connector type12 Application
Specification Information
Add-up fillers and alignment clipare painted trim grey finish.
Pattern numbers correspond toadd-up panel height.
Application Notes
Straight connector clips overadjacent non-stackable add-uppanels.
Add-up fillers join between add-uppanels over a service wallconnection or a T-end to extendenclosure from bottom of crown totop of add-up. Fillers requireretrofitting add-up panels with newtrim.
Retrofit kits are no-charge itemsthat are specified separately.
Currents
69
Scr
eens
and
add-
uppa
nels
Stackable add-up panelsglazed, translucent fiberglass and marker surfacefirst up panels
description w d h pattern no.acrylicW (C)
acrylicW (T)
marker(M)
First up panel on service wall crown 24� 2� 12� AY1 1224C( ) $667. $727. $695.36� 2� 12� AY1 1236C( ) 773. 844. 809.48� 2� 12� AY1 1248C( ) 885. 967. 961.60� 2� 12� AY1 1260C( ) 944. 1,036. n/a24� 2� 21� AY1 2124C( ) 726. 788. 784.36� 2� 21� AY1 2136C( ) 843. 926. 914.48� 2� 21� AY1 2148C( ) 965. 1,062. 1,093.60� 2� 21� AY1 2160C( ) 1,100. 1,210. n/a24� 2� 28� AY1 2824C( ) 1,007. 1,104. 838.36� 2� 28� AY1 2836C( ) 1,191. 1,310. 985.48� 2� 28� AY1 2848C( ) 1,378. 1,519. 1,172.60� 2� 28� AY1 2860C( ) 1,497. 1,644. n/a
First up panel on linkable screen or Morrisonpanel
18� 2� 16� AY1 1618M( ) 629. 683. n/a24� 2� 16� AY1 1624M( ) 683. 741. 730.30� 2� 16� AY1 1630M( ) 738. 806. 785.36� 2� 16� AY1 1636M( ) 798. 872. 849.42� 2� 16� AY1 1642M( ) 848. 929. 921.48� 2� 16� AY1 1648M( ) 906. 991. 1,012.60� 2� 16� AY1 1660M( ) 985. 1,072. n/a18� 2� 25� AY1 2518M( ) 801. 874. n/a24� 2� 25� AY1 2524M( ) 874. 955. 812.30� 2� 25� AY1 2530M( ) 949. 1,041. 883.36� 2� 25� AY1 2536M( ) 1,026. 1,131. 952.42� 2� 25� AY1 2542M( ) 1,103. 1,212. 1,043.48� 2� 25� AY1 2548M( ) 1,185. 1,303. 1,138.60� 2� 25� AY1 2560M( ) 1,260. 1,383. n/a
Order Code
Example: AY1 1636M WC 117
AY1 Stackable add-up16 Height36 WidthM Mounting kitW Surface typeC Acrylic finish117 Frame finish
Specification Information
Top and edge trim are trim grey.
Specify surface type.W GlazedM Marker surface (both sides)
Specify wide add-up panels for useon long Service Wall and Fenceruns.
For glazed panels specify acrylic:C Clear tempered glassT Acid etched tempered glass
For glazed panels also specify framefinish.
Application Notes
Stackable add-up panels provideadaptable privacy on Service Walls,linkable screens or Morrison panels.First up panels include top and edgetrims and bayonet supports that bolton to Service Wall frame or top ofscreen or panel. All stackableadd-up panels may be removedwithout tools.
Specify trim caps and connectorsseparately.
Currents
70
Stackable add-up panelsglazed, translucent fiberglass and marker surfacenext up panels
description w d h pattern no.acrylicW (C)
acrylicW (T)
marker(M)
Next up panel on stackable add-up panels 18� 2� 16� AY1 1618S( ) $624. $675. n/a24� 2� 16� AY1 1624S( ) 675. 733. 724.30� 2� 16� AY1 1630S( ) 731. 800. 777.36� 2� 16� AY1 1636S( ) 790. 864. 842.42� 2� 16� AY1 1642S( ) 841. 920. 911.48� 2� 16� AY1 1648S( ) 898. 983. 1,000.60� 2� 16� AY1 1660S( ) 977. 1,063. n/a
Order Code
Example: AY1 1636S WC 117
AY1 Stackable add-up16 Height36 WidthS Mounting kitW Surface typeC Acrylic finish117 Frame finish
Specification Information
Top and edge trim are trim grey.
Specify surface type.W GlazedM Marker surface (both sides)
Specify wide add-up panels for useon long Service Wall and Fenceruns.
A maximum of one next upstackable add-up panel may be usedon top of a first up stackable add-uppanel.
For glazed panels specify acrylic:C Clear tempered glassT Acid etched tempered glass
For glazed panels also specify framefinish.
Application Notes
Stackable add-up panels provideadaptable privacy on Service Walls,linkable screens or Morrison panels.Next up panels include intermediatemasts that engage into sides ofcorresponding width first up ornext-up panels. All stackableadd-up panels may be removedwithout tools.
Specify trim caps and connectorsseparately.
Currents
71
Scr
eens
and
add-
uppa
nels
Stackable add-up panelsupholsteredfirst up panels
description w d h pattern no. 10 15 20 30 35 40 45 50 55
First up panel on service wall crown 24� 21/4� 12� AY1 1224C A( ) $522. $564. $574. $632. $660. $702. $742. $770. $810.36� 21/4� 12� AY1 1236C A( ) 606. 664. 674. 746. 782. 836. 888. 924. 974.48� 21/4� 12� AY1 1248C A( ) 706. 772. 798. 882. 922. 988. 1,058. 1,098. 1,158.60� 21/4� 12� AY1 1260C A( ) 794. 872. 890. 990. 1,038. 1,116. 1,194. 1,242. 1,312.24� 21/4� 21� AY1 2124C A( ) 570. 624. 634. 694. 730. 774. 828. 854. 904.36� 21/4� 21� AY1 2136C A( ) 670. 732. 746. 832. 872. 928. 990. 1,030. 1,088.48� 21/4� 21� AY1 2148C A( ) 786. 862. 884. 986. 1,030. 1,108. 1,180. 1,232. 1,302.60� 21/4� 21� AY1 2160C A( ) 880. 968. 992. 1,110. 1,164. 1,254. 1,338. 1,400. 1,478.
First up panel on linkable screen orMorrison Panel
18� 21/4� 16� AY1 1618M A( ) 508. 556. 566. 626. 648. 690. 732. 760. 800.24� 21/4� 16� AY1 1624M A( ) 540. 586. 590. 656. 684. 730. 770. 804. 842.30� 21/4� 16� AY1 1630M A( ) 586. 638. 650. 720. 750. 804. 848. 884. 928.36� 21/4� 16� AY1 1636M A( ) 630. 684. 700. 772. 812. 874. 926. 964. 1,016.42� 21/4� 16� AY1 1642M A( ) 688. 754. 770. 862. 902. 964. 1,028. 1,070. 1,132.48� 21/4� 16� AY1 1648M A( ) 734. 806. 828. 918. 962. 1,032. 1,098. 1,146. 1,210.60� 21/4� 16� AY1 1660M A( ) 822. 904. 928. 1,032. 1,084. 1,166. 1,244. 1,300. 1,372.18� 21/4� 25� AY1 2518M A( ) 560. 606. 626. 684. 720. 764. 810. 840. 886.24� 21/4� 25� AY1 2524M A( ) 590. 642. 658. 726. 758. 808. 858. 890. 940.30� 21/4� 25� AY1 2530M A( ) 642. 702. 720. 798. 834. 890. 948. 988. 1,038.36� 21/4� 25� AY1 2536M A( ) 692. 760. 772. 862. 904. 968. 1,032. 1,072. 1,136.42� 21/4� 25� AY1 2542M A( ) 764. 838. 858. 958. 1,000. 1,080. 1,154. 1,200. 1,268.48� 21/4� 25� AY1 2548M A( ) 814. 894. 920. 1,026. 1,072. 1,156. 1,232. 1,286. 1,362.60� 21/4� 25� AY1 2560M A( ) 914. 1,008. 1,034. 1,158. 1,218. 1,308. 1,400. 1,458. 1,544.
Order Code
Example: AY1 1660M A20
AY1 Stackable panel16 Height60 WidthM Mounting kitA Surface type20 Fabric group
Specification Information
Top and trim edge are trim grey.
Surface type:A Tackable upholstered
Specify fabric group:10 Fabric group 1015 Fabric group 1520 Fabric group 2030 Fabric group 3035 Fabric group 3540 Fabric group 4050 Fabric group 5055 Fabric group 55
Specify wide add-up panels for useon long Service Wall and Fenceruns.
Application Notes
Stackable add-up panels provideadaptable privacy on Service Walls,linkable screens or Morrison panels.First up panels include top and edgetrims and bayonet supports that bolton to Service Wall frame or top ofscreen or panel. All stackableadd-up panels may be removedwithout tools.
Currents
72
Stackable add-up panelsupholsterednext up panels
description w d h pattern no. 10 15 20 30 35 40 45 50 55
Next up panel on stackable add-up panels 18� 21/4� 16� AY1 1618S A( ) $504. $552. $560. $616. $642. $684. $726. $752. $794.24� 21/4� 16� AY1 1624S A( ) 530. 580. 588. 648. 676. 724. 764. 796. 836.30� 21/4� 16� AY1 1630S A( ) 580. 632. 644. 714. 742. 796. 840. 876. 920.36� 21/4� 16� AY1 1636S A( ) 624. 678. 692. 766. 806. 866. 916. 952. 1,008.42� 21/4� 16� AY1 1642S A( ) 682. 748. 764. 848. 892. 954. 1,018. 1,062. 1,124.48� 21/4� 16� AY1 1648S A( ) 728. 800. 820. 908. 950. 1,020. 1,088. 1,134. 1,198.60� 21/4� 16� AY1 1660S A( ) 814. 896. 920. 1,022. 1,076. 1,156. 1,234. 1,286. 1,360.
Order Code
Example: AY1 1660S A20
AY1 Stackable panel16 Height60 WidthS Mounting kitA Surface type20 Fabric group
Specification Information
Top and trim edge are trim grey.
Surface type:A Tackable upholsteredSpecify fabric group:10 Fabric group 1015 Fabric group 1520 Fabric group 2030 Fabric group 3035 Fabric group 3540 Fabric group 4050 Fabric group 5055 Fabric group 55
Specify wide add-up panels for useon long Service Wall and Fenceruns.
A maximum of one next upstackable add-up panel may be usedon top of a first up stackable add-uppanel.
Application Notes
Stackable add-up panels provideadaptable privacy on Service Walls,linkable screens or Morrison panels.Next up panels include intermediatemasts that engage into sides ofcorresponding width first up ornext-up panels. All stackableadd-up panels may be removedwithout tools.
Currents
73
Scr
eens
and
add-
uppa
nels
Stackable add-up connectors and fillersstackable add-up panels orMorrison panels perpendicular to service wall
description type w d h pattern no. list price
Crown fillers for stackable add-up panelsperpendicular to service wall
First up 2� 2� 16� AY1 PC16 $267.First up 2� 2� 25� AY1 PC25 283.First up 2� 2� 32� AY1 PC32 296.Next up 2� 2� 16� AY1 SPC16 250.
Crown fillers for Morrison perpendicular toservice wall
21/4� 21/4� 16� AU1 PC12( ) 167.21/4� 21/4� 25� AU1 PC21( ) 209.21/4� 21/4� 32� AU1 PC28( ) 250.
Order Code
Example: AU1 PC12 613
AU1 Add-up panelPC Crown filler12 Height613 Finish
Specification Information
Specify finish for vertical cover andtop cap.
Application Notes
Crown fillers extend from stackableadd-up panel or Morrison panel oradd-on panel connector to surface ofcrown-mounted add-up panels.
Specify connector separately.
Crown filler includes top cap.
Currents
74
Stackable add-up connectors and fillerscrown and linkable screen applications
description type w d h pattern no. price
Trim caps End cap AY1 CE $5.Straight cap 2� 2� – AY1 CS 5.
Corner first up stackable connectors overlinkable screens
2� 2� 16� AY1 LL16 250.2� 2� 25� AY1 LL25 283.2� 2� 32� AY1 LL32 316.
Corner next up stackable connectors overlinkable screens
2� 2� 16� AY1 SL16 296.
T first up stackable connectors over linkablescreens
2� 2� 16� AY1 LT16 316.2� 2� 25� AY1 LT25 350.2� 2� 32� AY1 LT32 383.
T next up stackable connectors over linkablescreens
2� 2� 16� AY1 ST16 365.
Order Code
Example: AY1 LL16
AY1 Stackable add-upL Screen applicationL Configuration16 Height
Specification Information
Connector caps and connector trimsare integral color trim grey.
Application Notes
Trim caps are specified byapplication to fill top corners ofstackable add-up panels. Straightcap aligns adjacent add-up panels.End cap finishes the end of a run ofadd-up panels.
Stackable connectors join stackableadd-up panels over a linkablescreen connector. Next upconnectors correspond to next uppanels.
Currents
75
Scr
eens
and
add-
uppa
nels
Stackable add-up connectors and fillerscrown and linkable screen applications
description type w d h pattern no. price
X first up stackable connectors over linkablescreens
2� 2� 16� AY1 LX16 $365.2� 2� 25� AY1 LX25 415.2� 2� 32� AY1 LX32 448.
X next up stackable connectors over linkablescreens - X next up
2� 2� 16� AY1 SX16 415.
First up straight post 2� 2� 16� AY1 LP16 283.2� 2� 25� AY1 LP25 316.2� 2� 32� AY1 LP32 350.
Next up straight post 2� 2� 16� AY1 SP16 330.
Order Code
Example: AY1 LL16
AY1 Stackable add-upL Screen applicationL Configuration16 Height
Specification Information
Connector caps and connector trimsare integral color trim grey.
Application Notes
Trim caps are specified byapplication to fill top corners ofstackable add-up panels. Straightcap aligns adjacent add-up panels.End cap finishes the end of a run ofadd-up panels.
Stackable connectors join stackableadd-up panels over a linkablescreen connector. Next upconnectors correspond to next uppanels.
Currents
76
Stackable add-up connectors and fillersservice wall, T-end and linkable screen applications
description type w d h pattern no. list price
Stackable accessories Crown-mount masts (replacement) AY1 CMK $68.High-low adapter kit AY1 HLA 83.Linkable screen masts (replacement AY1 MMK 68.Stacking hardware kit (replacement) AY1 SMK 47.
90° 2-way L first up corner fillers 6� 6� 16� AY1 CL12 498.6� 6� 25� AY1 CL21 583.6� 6� 32� AY1 CL28 665.
90° 2-way L next up corner fillers 6� 6� 16� AY1 SCL16 549.
90° 3-way T corner fillers 7� 6� 16� AY1 CT12 583.7� 6� 25� AY1 CT21 665.7� 6� 32� AY1 CT28 748.
90° 3-way T next up corner fillers 7� 6� 16� AY1 SCT16 631.
Order Code
Example: AY1 CL28
AY1 Stackable add-upCL Connector type28 Height
Specification Information
Stackable add-up fillers and trimare trim grey finish.
Application Notes
Hi-low adapter kit includes an endcap and a bayonet with attachmentholes to join stackable add-uppanels in a straight high/lowconfiguration. The adapter alsoadapts a corner, T, or X post forhigh/low corner configurations.
Corner fillers join stackableadd-ups and fill the space above aService Wall L or T connection.
T-end extension fillers fill the 11/8�or 31/2� space above the extendingarea of a T-end connection at theend of a Service Wall with stackableadd-up panels.
T-end stackable fillers fill the7�-wide space above a T-end whenattached linkable screens orMorrison panels have stackableadd-ups.
All fillers engage into the topcorners of corresponding heightstackable add-up panels.
Currents
77
Scr
eens
and
add-
uppa
nels
Stackable add-up connectors and fillersservice wall, T-end and linkable screen applications
description type w d h pattern no. list price
90° 4-way X corner fillers 7� 7� 16� AY1 CX12 $665.7� 7� 25� AY1 CX21 748.7� 7� 32� AY1 CX28 832.
90° 4-way next up corner fillers 7� 7� 16� AY1 SCX16 715.
First up, T-end extension fillers 1� extension 1� 2� 16� AY1 X112 233.1� extension 1� 2� 25� AY1 X121 250.1� extension 1� 2� 32� AY1 X128 267.31/2� extension 31/2� 2� 16� AY1 X312 250.31/2� extension 31/2� 2� 25� AY1 X321 267.31/2� extension 31/2� 2� 32� AY1 X328 283.
Next up 1� fillers 1� 2� 16� AY1 SX116 250.
Next up 31/2� fillers 31/2� 2� 16� AY1 SX316 267.
T-end stackable fillers First up 7� 2� 16� AY1 AXT16 350.First up 7� 2� 25� AY1 AXT25 383.First up 7� 2� 32� AY1 AXT32 415.Next up 7� 2� 16� AY1 AXST16 350.
Order Code
Example: AY1 CL28
AY1 Stackable add-upCL Connector type28 Height
Specification Information
Stackable add-up fillers and trimare trim grey finish.
Application Notes
Hi-low adapter kit includes an endcap and a bayonet with attachmentholes to join stackable add-uppanels in a straight high/lowconfiguration. The adapter alsoadapts a corner, T, or X post forhigh/low corner configurations.
Corner fillers join stackableadd-ups and fill the space above aService Wall L or T connection.
T-end extension fillers fill the 11/8�or 31/2� space above the extendingarea of a T-end connection at theend of a Service Wall with stackableadd-up panels.
T-end stackable fillers fill the7�-wide space above a T-end whenattached linkable screens orMorrison panels have stackableadd-ups.
All fillers engage into the topcorners of corresponding heightstackable add-up panels.
Currents
78
Worksurfaces, universalstraight, curved and flat front13/4� wire drop
description w d h pattern no. lam.
24�D straight worksurface, curved front 24� 221/4� 1� AW1 S2424 ( ) $321.30� 221/4� 1� AW1 S3024 ( ) 353.36� 221/4� 1� AW1 S3624 ( ) 385.42� 221/4� 1� AW1 S4224 ( ) 419.48� 221/4� 1� AW1 S4824 ( ) 448.60� 221/4� 1� AW1 S6024 ( ) 514.66� 221/4� 1� AW1 S6624 ( ) 546.72� 221/4� 1� AW1 S7224 ( ) 579.84� 221/4� 1� AW1 S8424 ( ) 642.
30�D straight worksurface, curved front 36� 281/4� 1� AW1 S3630 ( ) 434.48� 281/4� 1� AW1 S4830 ( ) 495.60� 281/4� 1� AW1 S6030 ( ) 579.72� 281/4� 1� AW1 S7230 ( ) 673.84� 281/4� 1� AW1 S8430 ( ) 772.
24�D Straight worksurface, flat front 24� 221/4� 1� AW1 F2424 ( ) 321.30� 221/4� 1� AW1 F3024 ( ) 353.36� 221/4� 1� AW1 F3624 ( ) 385.42� 221/4� 1� AW1 F4224 ( ) 419.48� 221/4� 1� AW1 F4824 ( ) 448.60� 221/4� 1� AW1 F6024 ( ) 514.66� 221/4� 1� AW1 F6624 ( ) 546.72� 221/4� 1� AW1 F7224 ( ) 579.84� 221/4� 1� AW1 F8424 ( ) 642.
30�D straight worksurface, flat front 36� 281/4� 1� AW1 F3630 ( ) 434.48� 281/4� 1� AW1 F4830 ( ) 495.60� 281/4� 1� AW1 F6030 ( ) 579.72� 281/4� 1� AW1 F7230 ( ) 673.84� 281/4� 1� AW1 F8430 ( ) 772.
Order Code
Example: AW1 S4830 117
AW1 WorksurfaceS Straight48 Width30 Depth117 Top finish
Specification Information
Worksurface edges are trim grey.
Specify top finish
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Application Notes
Worksurfaces may beend-supported, cantilevered fromService Wall, or supported by C-legor pedestal at each end. Universalworksurfaces are interchangeablewith Currents desks. Specifysupports separately.
Straight worksurfaces have a 1�Dcurved front for additional surfacearea, or a flat front. Flat front allowstwo straight worksurfaces to meet atright angles.
24�D straight worksurfaces may becantilevered with two cantileverbrackets.
24� and 30�D straight worksurfacesmay be end supported with twoCurrents end support brackets.
Universal straight worksurfaces 36�wide and greater include a steelstiffener that doubles as a horizontalcable manager.
Currents
79
Wor
ksur
face
s
Worksurfaces, universalcorner13/4� wire drop
description w d h pattern no. lam.
24�D both sides corner worksurfaces 42� 42� 1� AW1 C4242 S ( ) $716.48� 48� 1� AW1 C4848 S ( ) 794.60� 60� 1� AW1 C6060 S ( ) 1,111.
30�D both sides corner worksurfaces 42� 42� 1� AW1 C4242 D ( ) 716.48� 48� 1� AW1 C4848 D ( ) 794.60� 60� 1� AW1 C6060 D ( ) 1,111.
30�D left/24�D right corner worksurfaces 42� 42� 1� AW1 C4242 L ( ) 716.48� 48� 1� AW1 C4848 L ( ) 794.60� 60� 1� AW1 C6060 L ( ) 1,111.
24�D left/30�D right corner worksurfaces 42� 42� 1� AW1 C4242 R ( ) 716.48� 48� 1� AW1 C4848 R ( ) 794.60� 60� 1� AW1 C6060 R ( ) 1,111.
Order Code
Example: AW1 C4848S 117
AW1 WorksurfaceC Corner48 Width left48 Width rightS Depth left and right117 Top finish
Specification Information
Dimensions shown in ‘‘w’’ columnare nominal width of left back edge.Dimensions shown in ‘‘d’’ columnare nominal width of right backedge.
Worksurface depths:S 24�D both sidesL 30�D left/24�D rightR 24�D left/30�D rightD 30�D both sides
Specify top finish.
Worksurface edges are trim grey.Clear maple laminate is notavailable on 60w x 60d corner tops.
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Application Notes
Universal worksurfaces areinterchangeable with Currentsdesks. Specify worksurface supportsseparately.
Corner worksurfaces may besupported by two cantileverbrackets on one back edges incombination with C-leg or pedestalsupport on other end.
Universal corner worksurfacesinclude a steel stiffener on bothback edges that doubles as ahorizontal cable manager.
Currents
80
Worksurfaces, universalextended corner13/4� wire dropextended left
description w d h pattern no. lam.
24�D both sides corner worksurfaces, extendedleft
60� 36� 1� AW1 C6036 S ( ) $794.60� 42� 1� AW1 C6042 S ( ) 876.60� 48� 1� AW1 C6048 S ( ) 954.72� 36� 1� AW1 C7236 S ( ) 954.72� 42� 1� AW1 C7242 S ( ) 1,030.72� 48� 1� AW1 C7248 S ( ) 1,111.84� 36� 1� AW1 C8436 S ( ) 1,111.84� 42� 1� AW1 C8442 S ( ) 1,191.84� 48� 1� AW1 C8448 S ( ) 1,271.
30�D both sides corner worksurfaces, extendedleft
60� 48� 1� AW1 C6048 D ( ) 1,033.72� 48� 1� AW1 C7248 D ( ) 1,191.84� 48� 1� AW1 C8448 D ( ) 1,350.
30�D left/24�D right corner worksurfaces,extended left
60� 42� 1� AW1 C6042 L ( ) 954.60� 48� 1� AW1 C6048 L ( ) 1,033.72� 42� 1� AW1 C7242 L ( ) 1,111.72� 48� 1� AW1 C7248 L ( ) 1,191.84� 42� 1� AW1 C8442 L ( ) 1,271.84� 48� 1� AW1 C8448 L ( ) 1,350.
24�D left/30�D right corner worksurfaces,extended left
60� 42� 1� AW1 C6042 R ( ) 954.60� 48� 1� AW1 C6048 R ( ) 1,033.72� 42� 1� AW1 C7242 R ( ) 1,111.72� 48� 1� AW1 C7248 R ( ) 1,191.84� 42� 1� AW1 C8442 R ( ) 1,271.84� 48� 1� AW1 C8448 R ( ) 1,350.
Order Code
Example: AW1 C6036S 117
AW1 WorksurfaceC Corner60 Width left36 Width rightS Depth left and right117 Top finish
Specification Information
Dimensions shown in ‘‘w’’ columnare nominal width of left back edge.Dimensions shown in ‘‘d’’ columnare nominal width of right backedge.
Worksurface depths:S 24�D both sidesL 30�D left/24�D rightR 24�D left/30�D rightD 30�D both sides
Specify top finish.
Worksurface edges are trim grey.
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Application Notes
Universal worksurfaces areinterchangeable with Currentsdesks. Specify worksurface supportsseparately.
Corner worksurfaces may besupported by two cantileverbrackets on one back edge incombination with C-leg or pedestalsupport on other end.
Universal extended cornerworksurfaces include a steelstiffener on both back edges thatdoubles as a horizontal cablemanager.
Currents
81
Wor
ksur
face
s
Worksurfaces, universalextended corner13/4� wire dropextended right
description w d h pattern no. lam.
24�D both sides corner worksurfaces, extendedright
36� 60� 1� AW1 C3660 S ( ) $794.36� 72� 1� AW1 C3672 S ( ) 954.36� 84� 1� AW1 C3684 S ( ) 1,111.42� 60� 1� AW1 C4260 S ( ) 876.42� 72� 1� AW1 C4272 S ( ) 1,030.42� 84� 1� AW1 C4284 S ( ) 1,191.48� 60� 1� AW1 C4860 S ( ) 954.48� 72� 1� AW1 C4872 S ( ) 1,111.48� 84� 1� AW1 C4884 S ( ) 1,271.
30�D both sides corner worksurfaces, extendedright
48� 60� 1� AW1 C4860 D ( ) 1,033.48� 72� 1� AW1 C4872 D ( ) 1,191.48� 84� 1� AW1 C4884 D ( ) 1,350.
24�D left/30�D right corner worksurfaces,extended right
42� 60� 1� AW1 C4260 R ( ) 954.42� 72� 1� AW1 C4272 R ( ) 1,111.42� 84� 1� AW1 C4284 R ( ) 1,271.48� 60� 1� AW1 C4860 R ( ) 1,033.48� 72� 1� AW1 C4872 R ( ) 1,191.48� 84� 1� AW1 C4884 R ( ) 1,350.
30�D left/24�D right corner worksurfaces,extended right
42� 60� 1� AW1 C4260 L ( ) 954.42� 72� 1� AW1 C4272 L ( ) 1,111.42� 84� 1� AW1 C4284 L ( ) 1,271.48� 60� 1� AW1 C4860 L ( ) 1,033.48� 72� 1� AW1 C4872 L ( ) 1,191.48� 84� 1� AW1 C4884 L ( ) 1,350.
Order Code
Example: AW1 C3660S 117
AW1 WorksurfaceC Corner36 Width left60 Width rightS Depth left and right117 Top finish
Specification Information
Dimensions shown in ‘‘w’’ columnare nominal width of left back edge.Dimensions shown in ‘‘d’’ columnare nominal width of right backedge.
Worksurface depths:S 24�D both sidesL 30�D left/24�D rightR 24�D left/30�D rightD 30�D both sides
Specify top finish.
Worksurface edges are trim grey.
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Application Notes
Universal worksurfaces areinterchangeable with Currentsdesks. Specify worksurface supportsseparately.
Corner worksurfaces may besupported by two cantileverbrackets on one back edge incombination with C-leg or pedestalsupport on other end.
Universal extended cornerworksurfaces include a steelstiffener on both back edges thatdoubles as a horizontal cablemanager.
Currents
82
Worksurfaces, universalP-shape13/4� wire drop
description w d h pattern no. lam.
P-shape surfaces, extended left 75� 48� 1� AW1 P7548 S ( ) $1,271.87� 48� 1� AW1 P8748 S ( ) 1,430.
P-shape surfaces, extended right 48� 75� 1� AW1 P4875 S ( ) 1,271.48� 87� 1� AW1 P4887 S ( ) 1,430.
Order Code
Example: AW1 P7548S 117
AW1 WorksurfaceP P-shape75 Width left48 Width rightS Depth of return117 Top finish
Specification Information
Dimensions shown in ‘‘w’’ columnare nominal width of left back edge.Dimensions shown in ‘‘d’’ columnare nominal width of right backedge.
Specify top finish.
Worksurface edges are trim grey.
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Application Notes
P-shape worksurfaces may becantilevered from service wall along48�edge, and supported by 24�DC-leg at conference end. Specify twocantilever brackets and C-legseparately.
All P-shape worksurfacescorrespond to a 24�D adjacentstraight or corner worksurface.
Universal P-shape worksurfacesinclude a steel stiffener on bothback edges that doubles as ahorizontal cable manager.
Currents
83
Wor
ksur
face
s
Worksurfaces, universalshared and arc-shape13/4� wire drop
description w d h pattern no. lam.
36�D shared worksurface 36� 72� 1� AW1 R7236 ( ) $1,049.
36�D left, 24�D right arc shape surface 60� 341/4� 1� AW1 A60L ( ) 877.72� 341/4� 1� AW1 A72L ( ) 1,049.
36�D right, 24�D left arc shape surface 60� 341/4� 1� AW1 A60R ( ) 877.72� 341/4� 1� AW1 A72R ( ) 1,049.
Order Code
Example: AW1 P7548S 117
AW1 WorksurfaceP P-shape75 Width left48 Width rightS Depth of return117 Top finish
Specification Information
Specify top finish.
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Worksurface edges are trim grey.
Application Notes
36�D shared worksurface requirestwo straight legs and two endsupport brackets, or four straightlegs.
Arc shape worksurfaces require18�D floorstanding pedestal or 24�DC-leg at 24�D end and two endsupport brackets or straight legs at36�D end.
Universal shared and arc-shapeworksurfaces include a steelstiffener that doubles as a horizontalcable manager.
Currents
84
Currents worksurfaces for Morrison panels and linkablescreensstraight, flat front3/8� wire drop and grommet
description w d h pattern no. lam.
24�D straight worksurface, flat front 24� 235/8� 1� AWM2 F2424 ( )( ) $321.30� 235/8� 1� AWM2 F3024 ( )( ) 353.36� 235/8� 1� AWM2 F3624 ( )( ) 385.42� 235/8� 1� AWM2 F4224 ( )( ) 419.48� 235/8� 1� AWM2 F4824 ( )( ) 448.54� 235/8� 1� AWM2 F5424 ( )( ) 481.60� 235/8� 1� AWM2 F6024 ( )( ) 514.66� 235/8� 1� AWM2 F6624 ( )( ) 546.72� 235/8� 1� AWM2 F7224 ( )( ) 579.78� 235/8� 1� AWM2 F7824 ( )( ) 608.84� 235/8� 1� AWM2 F8424 ( )( ) 642.90� 235/8� 1� AWM2 F9024 ( )( ) 672.96� 235/8� 1� AWM2 F9624 ( )( ) 707.
30�D straight worksurface, flat front 30� 295/8� 1� AWM2 F3030 ( )( ) 400.36� 295/8� 1� AWM2 F3630 ( )( ) 434.42� 295/8� 1� AWM2 F4230 ( )( ) 468.48� 295/8� 1� AWM2 F4830 ( )( ) 495.54� 295/8� 1� AWM2 F5430 ( )( ) 535.60� 295/8� 1� AWM2 F6030 ( )( ) 579.66� 295/8� 1� AWM2 F6630 ( )( ) 627.72� 295/8� 1� AWM2 F7230 ( )( ) 673.78� 295/8� 1� AWM2 F7830 ( )( ) 721.84� 295/8� 1� AWM2 F8430 ( )( ) 772.90� 295/8� 1� AWM2 F9030 ( )( ) 818.96� 295/8� 1� AWM2 F9630 ( )( ) 865.
Order Code
Example: AWM2 F4830 117 111
AWM2 WorksurfaceF Flat48 Width30 Depth117 Top finish111 Trim finish
Specification Information
Specify top finish first, followed bytrim finish.
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Application Notes
Worksurfaces are sized for Morrisonpanel-based applications and maybe supported by Morrison panelplanning brackets or end-supportedfrom Currents Wall. 24�D straighttops may also be cantilevered fromCurrents Service Wall. Underside ofworksurfaces is drilled to accept allMorrison panel-planning brackets,Morrison and Currents pedestals,and worksurface stiffeners. 24�Dstraight tops are also drilled toaccept Currents Wall cantileverbrackets.
Currents worksurfaces for Morrisonaccept wood screws.
Currents worksurfaces for Morrisonrequire stiffener when the spanbetween structural supports exceeds36�. Specify worksurface stiffenersand supports separately.
Currents worksurfaces for Morrisoncannot be used in conjunction withMorrison Network desk supports.
Actual worksurface depth is3/8� lessthan nominal 24� and 30� for cableclearance.
All worksurfaces include one edgegrommet, centered at rear ofworksurface, with maximumclearance of 15/8�.
Currents for Morrison worksurfacesfeature crisp 90° cornerseliminating the corner kick detailtypical of Currents universal anddesk tops. Eliminating the cornerkick will facilitate the use ofbrackets, pedestals and end panelsat the side edge of worksurfaces andwill eliminate undesired gaps atworksurface joints.
24�D straight Currents worksurfacesfor Morrison up to 84� wide may becantilevered from the Service Wallwith two cantilever brackets andapplicable width worksurfacestiffener.
24�D straight Currents worksurfacesfor Morrison wider than 84� requirethree cantilever brackets andapplicable width worksurfacestiffeners.
Currents
85
Wor
ksur
face
s
Currents worksurfaces for Morrison panels and linkablescreensextended corner3/8� wire drop and grommetextended left
description w d h pattern no. lam.
24�D both sides corner worksurfaces, extendedleft
60� 36� 1� AWM2 C6036 S ( )( ) $794.60� 42� 1� AWM2 C6042 S ( )( ) 876.60� 48� 1� AWM2 C6048 S ( )( ) 954.72� 36� 1� AWM2 C7236 S ( )( ) 954.72� 42� 1� AWM2 C7242 S ( )( ) 1,030.72� 48� 1� AWM2 C7248 S ( )( ) 1,111.84� 48� 1� AWM2 C8448 S ( )( ) 1,271.
30�D both sides corner worksurfaces, extendedleft
60� 48� 1� AWM2 C6048 D ( )( ) 1,033.72� 48� 1� AWM2 C7248 D ( )( ) 1,191.84� 48� 1� AWM2 C8448 D ( )( ) 1,350.
30�D left/24�D right corner worksurfaces,extended left
60� 42� 1� AWM2 C6042 L ( )( ) 954.60� 48� 1� AWM2 C6048 L ( )( ) 1,033.72� 42� 1� AWM2 C7242 L ( )( ) 1,111.72� 48� 1� AWM2 C7248 L ( )( ) 1,191.84� 48� 1� AWM2 C8448 L ( )( ) 1,350.
24�D left/30�D right corner worksurfaces,extended left
60� 42� 1� AWM2 C6042 R ( )( ) 954.60� 48� 1� AWM2 C6048 R ( )( ) 1,033.72� 42� 1� AWM2 C7242 R ( )( ) 1,111.72� 48� 1� AWM2 C7248 R ( )( ) 1,191.84� 48� 1� AWM2 C8448 R ( )( ) 1,350.
Order Code
Example: AWM2 C6036S 117 111
AWM2 WorksurfaceC Corner60 Width left36 Width rightS Depth left and right117 Top finish111 Trim finish
Specification Information
Dimensions shown in ‘‘w’’ columnare nominal width of left back edge.Dimensions shown in ‘‘d’’ columnare nominal width of right backedge.
Worksurface depths:S 24�D both sidesL 30�D left/24�D rightR 24�D left/30�D rightD 30�D both sides
Specify top finish first, followed bytrim finish.
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Currents for Morrison worksurfacesfeature crisp 90° cornerseliminating the corner kick detailtypical of Currents universal anddesk tops. Eliminating the cornerkick will facilitate the use ofbrackets, pedestals and end panelsat the side edge of worksurfaces andwill eliminate undesired gaps atworksurface joints.
Currents worksurfaces for Morrisonaccept wood screws.
Application Notes
Worksurfaces are sized for Morrisonpanel-based applications and maybe supported by Morrisonpanel-planning brackets orend-supported and cantileveredfrom Currents Wall. Extended sidemay also be supported with CurrentsC-legs. Underside of worksurface isdrilled to accept all Morrisonpanel-planning brackets, Morrisonand Currents pedestals, worksurfacestiffeners and Currents C-leg on theextended side.
Currents worksurfaces for Morrisonrequire stiffener when the spanbetween structural supports exceeds36�. Specify worksurface stiffenersand supports separately.
Currents worksurfaces for Morrisoncannot be used in conjunction withMorrison Network desk supports.
Actual worksurface is3/8� less thannominal 24� and 30� for cableclearance.
All worksurfaces include two edgegrommets, centered on back edgesof worksurface, with maximumclearance of 15/8�.
Currents
86
Currents worksurfaces for Morrison panels and linkablescreensextended corner3/8� wire drop and grommetextended right
description w d h pattern no. lam.
24�D both sides corner worksurfaces extendedright
36� 60� 1� AWM2 C3660 S ( )( ) $794.36� 72� 1� AWM2 C3672 S ( )( ) 954.42� 60� 1� AWM2 C4260 S ( )( ) 876.42� 72� 1� AWM2 C4272 S ( )( ) 1,030.48� 60� 1� AWM2 C4860 S ( )( ) 954.48� 72� 1� AWM2 C4872 S ( )( ) 1,111.48� 84� 1� AWM2 C4884 S ( )( ) 1,271.
30�D both sides corner worksurfaces, extendedright
48� 60� 1� AWM2 C4860 D ( )( ) 1,033.48� 72� 1� AWM2 C4872 D ( )( ) 1,191.48� 84� 1� AWM2 C4884 D ( )( ) 1,350.
24�D left/30�D right corner worksurfaces,extended right
42� 60� 1� AWM2 C4260 R ( )( ) 954.42� 72� 1� AWM2 C4272 R ( )( ) 1,111.48� 60� 1� AWM2 C4860 R ( )( ) 1,033.48� 72� 1� AWM2 C4872 R ( )( ) 1,191.48� 84� 1� AWM2 C4884 R ( )( ) 1,350.
30�D left/24�D right corner worksurfaces,extended right
42� 60� 1� AWM2 C4260 L ( )( ) 954.42� 72� 1� AWM2 C4272 L ( )( ) 1,111.48� 60� 1� AWM2 C4860 L ( )( ) 1,033.48� 72� 1� AWM2 C4872 L ( )( ) 1,191.48� 84� 1� AWM2 C4884 L ( )( ) 1,350.
Order Code
Example: AWM2 C3660S 117 111
AWM2 WorksurfaceC Corner36 Width left60 Width rightS Depth left and right117 Top finish111 Trim finish
Specification Information
Dimensions shown in ‘‘w’’ columnare nominal width of left back edge.Dimensions shown in ‘‘d’’ columnare nominal width of right backedge.
Worksurface depths:S 24�D both sidesL 30�D left/24�D rightR 24�D left/30�D rightD 30�D both sides
Specify top finish first, followed bytrim finish.
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Currents for Morrison worksurfacesfeature crisp 90° cornerseliminating the corner kick detailtypical of Currents universal anddesk tops. Eliminating the cornerkick will facilitate the use ofbrackets, pedestals and end panelsat the side edge of worksurfaces andwill eliminate undesired gaps atworksurface joints.
Currents worksurfaces for Morrisonaccept wood screws.
Application Notes
Worksurfaces are sized for Morrisonpanel-based applications and maybe supported by Morrisonpanel-planning brackets orend-supported and cantileveredfrom Currents Wall. Extended sidemay also be supported with CurrentsC-legs. Underside of worksurface isdrilled to accept all Morrisonpanel-planning brackets, Morrisonand Currents pedestals, worksurfacestiffeners and Currents C-leg on theextended side.
Currents worksurfaces for Morrisonrequire stiffener when the spanbetween structural supports exceeds36�. Specify worksurface stiffenersand supports separately.
Currents worksurfaces for Morrisoncannot be used in conjunction withMorrison Network desk supports.
Actual worksurface is3/8� less thannominal 24� and 30� for cableclearance.
All worksurfaces include two edgegrommets, centered on back edgesof worksurface, with maximumclearance of 15/8�.
Currents
87
Wor
ksur
face
s
Currents worksurfaces for Morrison panels and linkablescreenscorner3/8� wire drop and grommet
description w d h pattern no. lam.
24�D both sides corner worksurfaces 42� 42� 1� AWM2 C4242 S ( )( ) $716.48� 48� 1� AWM2 C4848 S ( )( ) 794.60� 60� 1� AWM2 C6060 S ( )( ) 1,111.
30�D both sides corner worksurfaces 42� 42� 1� AWM2 C4242 D ( )( ) 716.48� 48� 1� AWM2 C4848 D ( )( ) 794.60� 60� 1� AWM2 C6060 D ( )( ) 1,111.
30�D left/24�D right corner worksurfaces 42� 42� 1� AWM2 C4242 L ( )( ) 716.48� 48� 1� AWM2 C4848 L ( )( ) 794.60� 60� 1� AWM2 C6060 L ( )( ) 1,111.
24�D left/30�D right corner worksurfaces 42� 42� 1� AWM2 C4242 R ( )( ) 716.48� 48� 1� AWM2 C4848 R ( )( ) 794.60� 60� 1� AWM2 C6060 R ( )( ) 1,111.
Order Code
Example: AWM2 C4848S 117 111
AWM2 WorksurfaceC Corner48 Width left48 Width rightS Depth left and right117 Top finish111 Trim finish
Specification Information
Dimensions shown in ‘‘w’’ columnare nominal width of left back edge.
Dimensions shown in ‘‘d’’ columnare nominal width of right backedge.
Worksurface depths:S 24�D both sidesL 30�D left/24�D rightR 24�D left/30�D rightD 30�D both sides
Specify top finish first, followed bytrim finish.
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Currents for Morrison worksurfacesfeature crisp 90° cornerseliminating the corner kick detailtypical of Currents universal anddesk tops. Eliminating the cornerkick will facilitate the use ofbrackets, pedestals and end panelsat the side edge of worksurfaces andwill eliminate undesired gaps atworksurface joints.
Clear Maple is not available on60�W x 60�D corner worksurfaces.
Currents worksurfaces for Morrisonaccept wood screws.
Application Notes
Worksurfaces are sized for Morrisonpanel-based applications and maybe supported by Morrisonpanel-planning brackets orend-supported and cantileveredfrom Currents Wall. Underside ofworksurfaces is drilled to accept allMorrison panel-planning brackets,Morrison and Currents pedestals,and worksurface stiffeners. 24�Dworksurfaces are also drilled toaccept Currents wall cantileverbrackets.
Currents worksurfaces for Morrisonrequire stiffener when the spanbetween structural supports exceeds36�. Specify worksurface stiffenersand supports separately.
All P-shaped worksurfacescorrespond to a 24�D adjacentstraight or corner worksurface.
Currents worksurfaces for Morrisoncannot be used in conjunction withMorrison Network desk supports.
Actual worksurface depth is3/8� lessthan nominal 24� and 30� for cableclearance.
All worksurfaces include two edgegrommets, centered on back edgesof worksurface, with maximumclearance of 15/8�.
Currents
88
Currents worksurfaces for Morrison panels and linkablescreensP-shapes3/8� wire drop and grommet
description w d h pattern no. lam.
P-shape surfaces, extended right 48� 75� 1� AWM2 P4875 S ( )( ) $1,271.48� 87� 1� AWM2 P4887 S ( )( ) 1,430.
P-shape surfaces, extended left 75� 48� 1� AWM2 P7548 S ( )( ) 1,271.87� 48� 1� AWM2 P8748 S ( )( ) 1,430.
Order Code
Example: AWM2 C4848S 117 111
AWM2 WorksurfaceC Corner48 Width left48 Width rightS Depth left and right117 Top finish111 Trim finish
Specification Information
Dimensions shown in ‘‘w’’ columnare nominal width of left back edge.
Dimensions shown in ‘‘d’’ columnare nominal width of right backedge.
Worksurface depths:S 24�D both sidesL 30�D left/24�D rightR 24�D left/30�D rightD 30�D both sides
Specify top finish first, followed bytrim finish.
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Currents for Morrison worksurfacesfeature crisp 90° cornerseliminating the corner kick detailtypical of Currents universal anddesk tops. Eliminating the cornerkick will facilitate the use ofbrackets, pedestals and end panelsat the side edge of worksurfaces andwill eliminate undesired gaps atworksurface joints.
Clear Maple is not available on60�W x 60�D corner worksurfaces.
Currents worksurfaces for Morrisonaccept wood screws.
Application Notes
Worksurfaces are sized for Morrisonpanel-based applications and maybe supported by Morrisonpanel-planning brackets orend-supported and cantileveredfrom Currents Wall. Underside ofworksurfaces is drilled to accept allMorrison panel-planning brackets,Morrison and Currents pedestals,and worksurface stiffeners. 24�Dworksurfaces are also drilled toaccept Currents wall cantileverbrackets.
Currents worksurfaces for Morrisonrequire stiffener when the spanbetween structural supports exceeds36�. Specify worksurface stiffenersand supports separately.
All P-shaped worksurfacescorrespond to a 24�D adjacentstraight or corner worksurface.
Currents worksurfaces for Morrisoncannot be used in conjunction withMorrison Network desk supports.
Actual worksurface depth is3/8� lessthan nominal 24� and 30� for cableclearance.
All worksurfaces include two edgegrommets, centered on back edgesof worksurface, with maximumclearance of 15/8�.
Currents
89
Wor
ksur
face
s
Currents worksurfaces for Morrison panels and linkablescreensstiffeners
description type w d h pattern no. price
Stiffener for worksurfaces 36� 20� 11/2� 1� AWM1 S36 $65.42� 26� 11/2� 1� AWM1 S42 69.48� 32� 11/2� 1� AWM1 S48 71.60� 44� 11/2� 1� AWM1 S60 73.66� 50� 11/2� 1� AWM1 S66 77.72� 56� 11/2� 1� AWM1 S72 80.78� 62� 11/2� 1� AWM1 S78 83.84� 68� 11/2� 1� AWM1 S84 85.
Order Code
Example: AWM1 S36
AWM1 StiffenerS Straight36 Application
Specification Information
Stiffeners are black painted finish.
Application Notes
Currents worksurfaces for Morrisonrequire stiffeners when the spanbetween structural supports (endsupports, cantilevers, pedestals, orC-legs) exceeds 36�. Stiffener alsoserves as horizontal cable manager.
Stiffener corresponds in width tostraight or corner worksurface backedge.
For 90� application span, useAWM1-S84 stiffener.
Stiffener mounts 18� from front edgeof worksurface and will interferewith mobile or floorstandingpedestals greater than 18� deep.
To accommodate a floorstandingpedestal greater than 18� deep atone end of worksurface, specifystiffener for 12� narrowerworksurface. To accommodate twofloorstanding pedestals ordouble-wide at one end ofworksurface, specify stiffener for24� narrower worksurface.
Currents
90
Cascade edge worksurfacesRectangular
description w d h pattern no. Solid Woodgrain
24�D Rectangular 24� 24� 11/8� ACE1R2424N $240. $275.30� 24� 11/8� ACE1R3024N 275. 316.36� 24� 11/8� ACE1R3624N 302. 349.42� 24� 11/8� ACE1R4224N 349. 402.48� 24� 11/8� ACE1R4824N 392. 451.54� 24� 11/8� ACE1R5424N 421. 484.60� 24� 11/8� ACE1R6024N 457. 526.66� 24� 11/8� ACE1R6624N 494. 566.72� 24� 11/8� ACE1R7224N 516. 593.78� 24� 11/8� ACE1R7824N 555. 637.84� 24� 11/8� ACE1R8424N 586. 673.90� 24� 11/8� ACE1R9024N 661. 759.96� 24� 11/8� ACE1R9624N 722. 829.
30�D Rectangular 24� 30� 11/8� ACE1R2430N 303. 351.30� 30� 11/8� ACE1R3030N 341. 392.36� 30� 11/8� ACE1R3630N 380. 437.42� 30� 11/8� ACE1R4230N 413. 473.48� 30� 11/8� ACE1R4830N 457. 526.54� 30� 11/8� ACE1R5430N 517. 595.60� 30� 11/8� ACE1R6030N 569. 653.66� 30� 11/8� ACE1R6630N 634. 729.72� 30� 11/8� ACE1R7230N 661. 759.78� 30� 11/8� ACE1R7830N 704. 810.84� 30� 11/8� ACE1R8430N 749. 862.90� 30� 11/8� ACE1R9030N 806. 927.96� 30� 11/8� ACE1R9630N 862. 990.
Order Code
Example: ACE1 R4824N 118
ACE1 Cascade edgeworksurface
R Rectangular48 Width24 DepthN No grommet118 Top finish
Specification Information
Specify:Grommet / No grommet.Replace the ‘‘N’’ suffix from thepattern number with ‘‘G’’. Add$20.
Available finishes:
Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Application Notes
Cascade Edge worksurfaces arewrapped with a 3D laminate sheetheated and pressed around anFSC-certified substrate. 3Dlaminate is more susceptible todenting, impact, tearing andmarring than conventionalhigh-pressure laminate and shouldbe handled with care. Do not dragworksurfaces across any flooringsurface. Treat Cascade Edgeworksurfaces like veneerworksurfaces for optimumperformance under normalconditions. Cascade Edgeworksurfaces have a 10 yearwarranty on defects in workmanshipand materials. This warranty doesnot cover damage occurring duringor after installation. Cascade edgeworksurfaces in solid colors utilize anon-PVC construction and are alsofree of any plasticizers, phthalatesand lead content.
Cascade Edge worksurfaces are notdrilled for stiffeners, pedestals orbrackets. Cascade Edgeworksurfaces are sized forpanel-based applications and maybe supported by linkable sceen inconjunction with Morrison panelplanning brackets, or end supportfrom the Currents wall. 24� Dstraight tops may also becantilevered from the Service Wall.
Cascade Edge worksurfaces are notinterchangeable with Currentsdesks surfaces and should not beused to create freestanding Currentsdesks. Worksurfaces are1/16� lessthan nominal width and3/8� less thannominal depth for rear wireclearance. Edge grommets arecentered at rear edges ofworksurface for maximum clearanceof 13/8�.
Worksurfaces require support every48� in width. All supportinghardware is ordered separately. UseMorrison brackets with wood screwsfor Currents Linkable screenapplications.
Worksurfaces may be supported ateach end by pedestals or endsupport ‘‘EC’’ brackets andcantilever brackets matching theworksurface depth. 24�Drectangular worksurfaces may alsobe cantilevered from the Currentsservice wall. Panel supportedworksurfaces over 48� must bemid-span supported by cantileverbrackets, specified separately.
Currents
91
Wor
ksur
face
s
Cascade edge worksurfacesCurvilinear corner
description A B C h pattern no. Solid Woodgrain
Curvilinear corner 36� 24� 24� 11/8� ACE1L3636SSN $597. $688.42� 24� 24� 11/8� ACE1L4242SSN 722. 829.42� 24� 30� 11/8� ACE1L4242SDN 857. 983.42� 30� 24� 11/8� ACE1L4242DSN 857. 983.48� 24� 24� 11/8� ACE1L4848SSN 810. 932.48� 24� 30� 11/8� ACE1L4848SDN 971. 1,116.48� 30� 24� 11/8� ACE1L4848DSN 971. 1,116.48� 30� 30� 11/8� ACE1L4848DDN 870. 1,001.
Order Code
Example: ACE1 L4848SSG 114
ACE1 Cascade edgeworksurface
L Curvilinear ‘‘L’’ top48 Width left48 Width rightS 24� depth left sideS 24� depth right sideG Grommets114 Top finish
Specification Information
Specify:Grommet / No grommet.Replace the ‘‘N’’ suffix from thepattern number with ‘‘G’’. Add $40.
Available finishes:
Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Note: When wood grain or brushedfinishes are specified on Cascadecorner worksurfaces with two ‘‘A’’sides of equal length that do notexceed 42� you must select one ofthree grain direction options. Insertthe desired grain direction ‘‘L’’= Lefthand, ‘‘R’’= Right hand or ‘‘D’’=Diagonal after the worksurfacefinish code to indicate theappropriate grain direction. Whenthe ‘‘D’’ option is selected pleaseadd $25.00 to the worksurface listprice. 48� Cascade corners are notavailable with a diagonal grainoption.
Application Notes
Cascade Edge worksurfaces arewrapped with a 3D laminate sheetheated and pressed around anFSC-certified substrate. 3Dlaminate is more susceptible todenting, impact, tearing andmarring than conventionalhigh-pressure laminate and shouldbe handled with care. Do not dragworksurfaces across any flooringsurface. Treat Cascade Edgeworksurfaces like veneerworksurfaces for optimumperformance under normalconditions. Cascade Edgeworksurfaces have a 10 yearwarranty on defects in workmanshipand materials. This warranty doesnot cover damage occurring duringor after installation. Cascade edgeworksurfaces in solid colors utilize anon-PVC construction and are alsofree of any plasticizers, phthalatesand lead content.
Cascade Edge worksurfaces are notdrilled for stiffeners, pedestals orbrackets. Cascade Edgeworksurfaces are sized forpanel-based applications and maybe supported by linkable sceen inconjunction with Morrison panelplanning brackets, or end supportfrom the Currents wall. 24� Dstraight tops may also becantilevered from the Service Wall.
Cascade Edge worksurfaces are notinterchangeable with Currentsdesks surfaces and should not beused to create freestanding Currentsdesks. Worksurfaces are1/16� lessthan nominal width and3/8� less thannominal depth for rear wireclearance. Edge grommets arecentered at rear edges ofworksurface for maximum clearanceof 13/8�.
Worksurfaces require support every48� in width. All supportinghardware is ordered separately. UseMorrison brackets with wood screwsfor Currents Linkable screenapplications.
Worksurfaces may be supported byleft or right hand 18� cantileverbracket at the rear corner, andcantilever bridging brackets on eachside edge. Worksurfaces may also beend supported or cantilever-bracketsupported from Currents wall.Extended side of blended L mayalso be supported with CurrentsC-legs.
Panel supported worksurfaces over48� must be mid-span supported bycantilever brackets, specifiedseparately.
Currents
92
Cascade edge worksurfacesBlended ‘‘D’’
description A B C h pattern no. Solid Woodgrain
Blended ‘‘D’’
right hand shown
66� 48� 24� 11/8� ACE1BD6648S(L/R) $967. $1,111.66� 48� 30� 11/8� ACE1BD6648D(L/R) 1,016. 1,170.72� 48� 24� 11/8� ACE1BD7248S(L/R) 988. 1,138.72� 48� 30� 11/8� ACE1BD7248D(L/R) 1,053. 1,212.78� 48� 24� 11/8� ACE1BD7848S(L/R) 1,142. 1,312.78� 48� 30� 11/8� ACE1BD7848D(L/R) 1,180. 1,355.84� 48� 24� 11/8� ACE1BD8448S(L/R) 1,173. 1,348.84� 48� 30� 11/8� ACE1BD8448D(L/R) 1,247. 1,432.
Order Code
Example: ACE1BD6648SL 118
ACE1 Cascade edgeworksurface
BD Blended ‘‘D’’66 Width48 DepthS 24�d returnL Extended left118 Top finish
Specification Information
Available finishes:Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Application Notes
Cascade Edge worksurfaces arewrapped with a 3D laminate sheetheated and pressed around anFSC-certified substrate. 3Dlaminate is more susceptible todenting, impact, tearing andmarring than conventionalhigh-pressure laminate and shouldbe handled with care. Do not dragworksurfaces across any flooringsurface. Treat Cascade Edgeworksurfaces like veneerworksurfaces for optimumperformance under normalconditions. Cascade Edgeworksurfaces have a 10 yearwarranty on defects in workmanshipand materials. This warranty doesnot cover damage occurring duringor after installation. Cascade edgeworksurfaces in solid colors utilize anon-PVC construction and are alsofree of any plasticizers, phthalatesand lead content.
Cascade Edge worksurfaces are notdrilled for stiffeners, pedestals orbrackets. Cascade Edgeworksurfaces are sized forpanel-based applications and maybe supported by linkable sceen inconjunction with Morrison panelplanning brackets, or end supportfrom the Currents wall. 24� Dstraight tops may also becantilevered from the Service Wall.
Cascade Edge worksurfaces are notinterchangeable with Currentsdesks surfaces and should not beused to create freestanding Currentsdesks. Worksurfaces are1/16� lessthan nominal width and3/8� less thannominal depth for rear wireclearance. Edge grommets arecentered at rear edges ofworksurface for maximum clearanceof 13/8�.
Worksurfaces require support every48� in width. All supportinghardware is ordered separately. UseMorrison brackets with wood screwsfor Currents Linkable screenapplications.
Blended D worksurfaces aresupported by a 48� VDT supportbracket kit for cantilevering fromthe Currents wall in conjunctionwith Currents C-leg. Use flatbracket or bridging bracket to jointo adjacent worksurface.
Currents
93
Wor
ksur
face
s
Cascade edge worksurfacesBlended ‘‘L’’
description B C A D h pattern no. Solid Woodgrain
Blended ‘‘L’’ 42� 60� 24� 24� 11/8� ACE1L4260SSN $990. $1,139.42� 66� 24� 24� 11/8� ACE1L4266SSN 1,016. 1,170.42� 72� 24� 24� 11/8� ACE1L4272SSN 1,054. 1,214.42� 78� 24� 24� 11/8� ACE1L4278SSN 1,067. 1,225.48� 60� 24� 24� 11/8� ACE1L4860SSN 1,003. 1,152.48� 60� 24� 30� 11/8� ACE1L4860SDN 983. 1,133.48� 60� 30� 24� 11/8� ACE1L4860DSN 983. 1,133.48� 66� 24� 24� 11/8� ACE1L4866SSN 1,039. 1,194.48� 66� 24� 30� 11/8� ACE1L4866SDN 1,035. 1,191.48� 66� 30� 24� 11/8� ACE1L4866DSN 1,035. 1,191.48� 72� 24� 24� 11/8� ACE1L4872SSN 1,077. 1,238.48� 72� 24� 30� 11/8� ACE1L4872SDN 1,083. 1,247.48� 72� 30� 24� 11/8� ACE1L4872DSN 1,083. 1,247.48� 78� 24� 24� 11/8� ACE1L4878SSN 1,187. 1,366.48� 84� 24� 24� 11/8� ACE1L4884SSN 1,335. 1,536.60� 42� 24� 24� 11/8� ACE1L6042SSN 990. 1,139.60� 48� 24� 24� 11/8� ACE1L6048SSN 1,003. 1,152.
Order Code
Example: ACE1 L4260SSN 114
ACE1 Cascade edgeworksurface
L Blended ‘‘L’’ top42 Width60 DepthS 24�d, left sideS 24�d, right sideN No Grommet114 Top finish
Specification Information
Specify:Grommet / No grommet.Replace the ‘‘N’’ suffix from thepattern number with ‘‘G’’. Add $40.
Available finishes:
Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Application Notes
Cascade Edge worksurfaces arewrapped with a 3D laminate sheetheated and pressed around anFSC-certified substrate. 3Dlaminate is more susceptible todenting, impact, tearing andmarring than conventionalhigh-pressure laminate and shouldbe handled with care. Do not dragworksurfaces across any flooringsurface. Treat Cascade Edgeworksurfaces like veneerworksurfaces for optimumperformance under normalconditions. Cascade Edgeworksurfaces have a 10 yearwarranty on defects in workmanshipand materials. This warranty doesnot cover damage occurring duringor after installation. Cascade edgeworksurfaces in solid colors utilize anon-PVC construction and are alsofree of any plasticizers, phthalatesand lead content.
Cascade Edge worksurfaces are notdrilled for stiffeners, pedestals orbrackets. Cascade Edgeworksurfaces are sized forpanel-based applications and maybe supported by linkable sceen inconjunction with Morrison panelplanning brackets, or end supportfrom the Currents wall. 24� Dstraight tops may also becantilevered from the Service Wall.
Cascade Edge worksurfaces are notinterchangeable with Currentsdesks surfaces and should not beused to create freestanding Currentsdesks. Worksurfaces are1/16� lessthan nominal width and3/8� less thannominal depth for rear wireclearance. Edge grommets arecentered at rear edges ofworksurface for maximum clearanceof 13/8�.
Worksurfaces require support every48� in width. All supportinghardware is ordered separately. UseMorrison brackets with wood screwsfor Currents Linkable screenapplications.
Worksurfaces may be supported byleft or right hand 18� cantileverbracket at the rear corner, andcantilever bridging brackets on eachside edge. Worksurfaces may also beend supported or cantilever-bracketsupported from Currents wall.Extended side of blended L mayalso be supported with CurrentsC-legs. Panel supportedworksurfaces over 48� must bemid-span supported by cantileverbrackets, specified separately.
Currents
94
Cascade edge worksurfacesBlended ‘‘L’’
description B C A D h pattern no. Solid Woodgrain
Blended ‘‘L’’ 60� 48� 24� 30� 11/8� ACE1L6048SDN $983. $1,133.60� 48� 30� 24� 11/8� ACE1L6048DSN 983. 1,133.66� 42� 24� 24� 11/8� ACE1L6642SSN 1,016. 1,170.66� 48� 24� 24� 11/8� ACE1L6648SSN 1,039. 1,194.66� 48� 24� 30� 11/8� ACE1L6648SDN 1,035. 1,191.66� 48� 30� 24� 11/8� ACE1L6648DSN 1,035. 1,191.72� 42� 24� 24� 11/8� ACE1L7242SSN 1,054. 1,214.72� 48� 24� 24� 11/8� ACE1L7248SSN 1,077. 1,238.72� 48� 24� 30� 11/8� ACE1L7248SDN 1,083. 1,247.72� 48� 30� 24� 11/8� ACE1L7248DSN 1,083. 1,247.78� 42� 24� 24� 11/8� ACE1L7842SSN 1,067. 1,225.78� 48� 24� 24� 11/8� ACE1L7848SSN 1,187. 1,366.84� 48� 24� 24� 11/8� ACE1L8448SSN 1,335. 1,536.
Order Code
Example: ACE1 L4260SSN 114
ACE1 Cascade edgeworksurface
L Blended ‘‘L’’ top42 Width60 DepthS 24�d, left sideS 24�d, right sideN No Grommet114 Top finish
Specification Information
Specify:Grommet / No grommet.Replace the ‘‘N’’ suffix from thepattern number with ‘‘G’’. Add $40.
Available finishes:
Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Application Notes
Cascade Edge worksurfaces arewrapped with a 3D laminate sheetheated and pressed around anFSC-certified substrate. 3Dlaminate is more susceptible todenting, impact, tearing andmarring than conventionalhigh-pressure laminate and shouldbe handled with care. Do not dragworksurfaces across any flooringsurface. Treat Cascade Edgeworksurfaces like veneerworksurfaces for optimumperformance under normalconditions. Cascade Edgeworksurfaces have a 10 yearwarranty on defects in workmanshipand materials. This warranty doesnot cover damage occurring duringor after installation. Cascade edgeworksurfaces in solid colors utilize anon-PVC construction and are alsofree of any plasticizers, phthalatesand lead content.
Cascade Edge worksurfaces are notdrilled for stiffeners, pedestals orbrackets. Cascade Edgeworksurfaces are sized forpanel-based applications and maybe supported by linkable sceen inconjunction with Morrison panelplanning brackets, or end supportfrom the Currents wall. 24� Dstraight tops may also becantilevered from the Service Wall.
Cascade Edge worksurfaces are notinterchangeable with Currentsdesks surfaces and should not beused to create freestanding Currentsdesks. Worksurfaces are1/16� lessthan nominal width and3/8� less thannominal depth for rear wireclearance. Edge grommets arecentered at rear edges ofworksurface for maximum clearanceof 13/8�.
Worksurfaces require support every48� in width. All supportinghardware is ordered separately. UseMorrison brackets with wood screwsfor Currents Linkable screenapplications.
Worksurfaces may be supported byleft or right hand 18� cantileverbracket at the rear corner, andcantilever bridging brackets on eachside edge. Worksurfaces may also beend supported or cantilever-bracketsupported from Currents wall.Extended side of blended L mayalso be supported with CurrentsC-legs. Panel supportedworksurfaces over 48� must bemid-span supported by cantileverbrackets, specified separately.
Currents
95
Wor
ksur
face
s
Cascade edge worksurfacesHalf round and corner round
description w d h pattern no. Solid Woodgrain
Half Round 48� 18� 11/8� ACE1H4818 $516. $593.491/2� 18� 11/8� ACE1H4818P 516. 593.60� 24� 11/8� ACE1H6024 709. 818.611/2� 24� 11/8� ACE1H6024P 709. 818.
LH Corner Round 24� 24� 11/8� ACE1CR24L 275. 316.
RH Corner Round 24� 24� 11/8� ACE1CR24R 275. 316.
Notched Corner Round 24� 24� 11/8� ACE1CR24N 275. 316.
Sample 12� 12� 11/8� ACE1R1212G 148. 171.
Order Code
Example: ACE1 H4818P 117
ACE1 Cascade edgeworksurface
H Half round48 Width18 DepthP Notched for panel117 Top finish
Specification Information
Available finishes:Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Application Information
Cascade Edge worksurfaces arewrapped with a 3D laminate sheetheated and pressed around anFSC-certified substrate. 3Dlaminate is more susceptible todenting, impact, tearing andmarring than conventionalhigh-pressure laminate and shouldbe handled with care. Do not dragworksurfaces across any flooringsurface. Treat Cascade Edgeworksurfaces like veneerworksurfaces for optimumperformance under normalconditions. Cascade Edgeworksurfaces have a 10 yearwarranty on defects in workmanshipand materials. This warranty doesnot cover damage occurring duringor after installation. Cascade edgeworksurfaces in solid colors utilize anon-PVC construction and are alsofree of any plasticizers, phthalatesand lead content.
Cascade Edge worksurfaces are notdrilled for stiffeners, pedestals orbrackets. Cascade Edgeworksurfaces are sized forpanel-based applications and maybe supported by linkable sceen inconjunction with Morrison panelplanning brackets, or end supportfrom the Currents wall. 24� Dstraight tops may also becantilevered from the Service Wall.Cascade Edge worksurfaces are notinterchangeable with Currentsdesks surfaces and should not beused to create freestanding Currentsdesks.
Worksurfaces are1/16� less thannominal width and3/8� less thannominal depth for rear wireclearance. Edge grommets arecentered at rear edges ofworksurface for maximum clearanceof 13/8�.
Worksurfaces require support every48� in width. All supportinghardware is ordered separately. UseMorrison brackets with wood screwsfor Currents Linkable screenapplications.
Half roundHalf round worksurfaces may besupported by cantilever bridgingbrackets in conjunction with arounded end support column.
Corner roundNotched corner round worksurfacesare supported by cantilever bridingbrackets on both side edges.End run Left- and Right-handcorner round worksurfaces aresupported by a combination of an‘‘EC’’ end bracket along the paneledge and a cantilever bridgingbracket to the adjacent worksurfaceside edge.
Currents
96
Cascade edge worksurfacesWave end
description 1 2 3 A B h pattern no. Solid Woodgrain
Wave End, LH 36� 24� 30� 15� 3� 11/8� ACE1W363024N $642. $738.42� 24� 30� 15� 9� 11/8� ACE1W423024N 674. 776.48� 24� 30� 15� 15� 11/8� ACE1W483024N 723. 831.72� 24� 30� 231/2� 301/2� 11/8� ACE1W723024N 919. 1,056.
Wave End, RH 36� 30� 24� 3� 15� 11/8� ACE1W362430N 642. 738.42� 30� 24� 9� 15� 11/8� ACE1W422430N 674. 776.48� 30� 24� 15� 15� 11/8� ACE1W482430N 723. 831.72� 30� 24� 231/2� 301/2� 11/8� ACE1W722430N 919. 1,056.
Order Code
Example: ACE1W483024N 118
ACE1 Cascade edgeworksurface
W Wave end48 Width30 Depth, right side24 Depth, left sideN No grommet118 Top finish
Specification Information
Specify:Grommet / No grommet.Replace the ‘‘N’’ suffix from thepattern number with ‘‘G’’. Add $20.
Available finishes:Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Application Notes
Cascade Edge worksurfaces arewrapped with a 3D laminate sheetheated and pressed around anFSC-certified substrate. 3Dlaminate is more susceptible todenting, impact, tearing andmarring than conventionalhigh-pressure laminate and shouldbe handled with care. Do not dragworksurfaces across any flooringsurface. Treat Cascade Edgeworksurfaces like veneerworksurfaces for optimumperformance under normalconditions. Cascade Edgeworksurfaces have a 10 yearwarranty on defects in workmanshipand materials. This warranty doesnot cover damage occurring duringor after installation. Cascade edgeworksurfaces in solid colors utilize anon-PVC construction and are alsofree of any plasticizers, phthalatesand lead content.
Cascade Edge worksurfaces are notdrilled for stiffeners, pedestals orbrackets. Cascade Edgeworksurfaces are sized forpanel-based applications and maybe supported by linkable sceen inconjunction with Morrison panelplanning brackets, or end supportfrom the Currents wall. 24� Dstraight tops may also becantilevered from the Service Wall.
Cascade Edge worksurfaces are notinterchangeable with Currentsdesks surfaces and should not beused to create freestanding Currentsdesks. Worksurfaces are1/16� lessthan nominal width and3/8� less thannominal depth for rear wireclearance. Edge grommets arecentered at rear edge of worksurfacefor maximum clearance of 13/8�.
Worksurfaces require support every48� in width. All supportinghardware is ordered separately. UseMorrison brackets with wood screwsfor Currents Linkable screenapplications.
Worksurfaces may be supported ateach end by pedestals or endsupport ‘‘EC’’ brackets andcantilever brackets matching theworksurface depth. Use cantileverbridging bracket to join to adjacentworksurface. Panel supportedworksurfaces over 48� must bemid-span supported by cantileverbrackets, specified separately.
Currents
97
Wor
ksur
face
s
Worksurface, samples
description w d h pattern no. L
Currents 16� 16� 1� CSAMP1616 ( ) $100.
Currents for Morrison 16� 16� 1� AWMSAMP1616 ( )( ) 106.
Original Upstart 16� 16� 1� USAMP1616 ( )( ) 100.
Order Code
Example: AWMSAMP1616 118
AWM Currents for MorrisonSAMP Worksurface Sample16 Width16 Depth118 Top finish118 Edge finish
Specification Information
Specify:Top and edge finish for Currents forMorrison and Original Upstartworksurface samples. Specify topfinish for Currents worksurfacesamples.
Veneer finishes for Currentsworksurfaces are available throughCustom Product Development.
Currents
98
Worksurface supportsService Wall and Fence-Mounted
description type w d h pattern no. paint
Adjustable cantilever bracket (up to 24�D) 3� 20� 23-33� AB1 AC24 ( ) $238.
Adjustable cantilever bridging bracket 3� 20� 23-33� AB1-ABC24( ) 308.
Fixed end support bracket 3� 6� 27� AB1 FE ( ) 153.
Adjustable end support bracket 3� 6� 23-33� AB2 AE ( ) 191.
Compact fixedend support bracket
for 28�h worksurface 6� 27� AB2 FE27 ( ) 162.for 295/8� h worksurface 6� 28� AB2 FE28 ( ) 162.
Fence end bracket kit AB1FAE ( ) 224.
Order Code
Example: AB1 AC24 117
AB1 BracketAC Type24 Depth117 Finish
Specification Information
Specify painted finishes for supportcolumn, C-leg, and brackets.
Fence end bracket kit includes aleft and a right handed bracket.
Specify paint finish for end bracket.
Application Notes
Specify worksurface cantilever andend support brackets to attachworksurfaces to Service Walls.
Specify two cantilever brackets tosupport any 24�D Currents,Morrison, Reff, Equity, Dividends,or Cascade worksurface up to 84�wide, or one back edge of cornerworksurface. Specify threecantilever brackets to support any24�D Currents, Morrison, Reff,Equity, Dividends or Cascadeworksurface greater than 84� wide.Specify two end support brackets tosupport one end of straight,conference, or arc-shape surface.
Adjustable height cantilever andbridging cantilever brackets supportunderside of worksurface in 1�increments from 23� to 33�H (24� to34� top height).
Adjustable bridging cantileversupports adjacent 48�W straight orcorner worksurfaces.
End support brackets adjust23�-33�H (24� to 34� top height).Fixed height brackets supportworksurface at 28�H and 295/8� H.
Fence end brackets attach to Fenceto support one end of rectilinear orone back edge of a cornerworksurface when the other ends areproperly supported by legs, storageor panel brackets.
Fence end brackets support theunderside of the worksurface in 1�increments from 26� to 28� (27� to29� top height).
Currents
99
Wor
ksur
face
s
Worksurface supportsfreestanding
description type application w d h pattern no. paint
Straight leg Adjustable 2� 4� 23-29� AB1 I27A(G/C) ( ) $435.Fixed 2� 4� 27� AB1 I27F(G/C) ( ) 223.Low 2� 4� 25� AB1 I25(G/C) ( ) 223.
C-leg, adjustable 24�D Left 2� 21� 23-29� AB1 CL24L ( )( ) 482.Right 2� 21� 23-29� AB1 CL24R ( )( ) 482.
30�D Left 2� 27� 23-29� AB1 CL30L ( )( ) 529.Right 2� 27� 23-29� AB1 CL30R ( )( ) 529.
C-leg, fixed height 24�D Left 2� 21� 27� AB1 CLF24L ( )( ) 402.Right 2� 21� 27� AB1 CLF24R ( )( ) 402.
30�D Left 2� 27� 27� AB1 CLF30L ( )( ) 441.Right 2� 27� 27� AB1 CLF30R ( )( ) 441.
Corner leg Corner worksurfaces 4� 4� 23-29� AB1 VL ( )( ) 402.
Order Code
Example: AB1 CL24L 612 G
AB1 SupportCL C-leg24 DepthL Left612 FinishG Glides
Specification Information
Specify painted finishes for supportcolumn, C-leg, and brackets.
C-Leg casters/glides:C Rear casters/front glidesG All glides
Casters/glides combination has nolevelling. All-glides versionprovides 13/4� levelling range.
Application Notes
Specify two straight legs undershared worksurface. Straight legsare fixed at 27�H (28� top height) oradjustable 23�-29� (24�-30� topheight).
C-legs support one end of anycorresponding depth Currentsworksurface. Corner legs supportonly the back corner of a Currentscorner worksurface. Specify C-legsfor side edges of Currents cornerand extended corner worksurfaces.
Adjustable C-legs and corner legsare adjustable in height to supportunderside of worksurface at 1�increments from 23� to 29� (24� to30� Currents top height). Fixedheight C-legs support desk at 28�H.Fixed height C-legs do not acceptservice beams.
Straight legs may not be used withCurrents universal worksurfaces orCurrents worksurfaces for Morrisonto create freestanding tables.
Currents
100
Pedestalsmobile
description type w d h pattern no. P1 / P2 P3
Standard mobile pedestals with top and pull 2 file 15� 17� 261/2� AS1 SFF M ( )( ) $1,293. $1,356.Data/file 15� 17� 22� AS1 SDF M ( )( ) 1,224. 1,285.Personal/data/file 15� 17� 261/2� AS1 SPDF M ( )( ) 1,426. 1,500.
Deep mobile pedestals with top and pull 2 file 15� 23� 261/2� AS1 DFF M ( )( ) 1,454. 1,524.Data/file 15� 23� 22� AS1 DDF M ( )( ) 1,386. 1,457.Personal/data/file 15� 23� 261/2� AS1 DPDF M ( )( ) 1,588. 1,669.
Standard mobile pedestal open top, with pull Data/file 15� 17� 22� AS1 SDFO ( )( ) 1,142. 1,199.
Deep mobile pedestal open top, with pull Data/file 15� 23� 22� AS1 DDFO ( )( ) 1,272. 1,337.
Order Code
Example: AS1 SDFM 612 612
AS1 PedestalS DepthDF ConfigurationM Mobile612 Finish for case612 Finish for fronts
Specification Information
Specify painted finish for case andfor fronts.
Veneer finishes for pedestal frontsare available through CustomProduct Development.
All pedestals include front lock withKnollKey lock system. Personaldrawer is 4�H. Data drawer is 7�H.File drawers are 11�H.Deep file drawers include filesupport for letter (width) or legal(depth) suspended file folders.All drawers have full extension, ballbearing drawer slides.
Application Notes
Mobile pedestals are independentstorage components with lockingcasters and pull. Standard mobilepedestals roll under Currentsworksurfaces set at 28� or higher.Deep mobile pedestals with two filesor personal/data/file will not fitunder stiffener of universalworksurface or Currents desk set at29� or lower. Specify data/filemobile pedestal under worksurfacesadjusted lower than 28�H.
Currents
101
Floo
rsta
ndin
gst
orag
e
Pedestalsfloorstanding
description type w d h pattern no. P1 / P2 P3
18�D Floorstanding pedestal 2 file 15� 17� 27� AS1 SFF G ( )( ) $937. $982.personal/data/file 15� 17� 27� AS1 SPDFG ( )( ) 1,071. 1,126.
24�D Floorstanding pedestal 2 file 15� 23� 27� AS1 DFF G ( )( ) 1,065. 1,120.personal/data/file 15� 23� 27� AS1 DPDFG ( )( ) 1,201. 1,262.
18�D Floorstanding pedestalDouble wide
2 file 30� 17� 27� AS1FF30G ( )( ) 1,641. 1,718.36� 17� 27� AS1FF36G ( )( ) 2,000. 2,096.
2 door 30� 17� 27� AS1DD30G ( )( ) 1,641. 1,718.36� 17� 27� AS1DD36G ( )( ) 2,000. 2,096.
data/file 30� 17� 23� AS1DF30G ( )( ) 1,557. 1,633.36� 17� 23� AS1DF36G ( )( ) 1,901. 1,994.
personal/data/file 30� 17� 27� AS1PDF30G ( )( ) 1,875. 1,971.36� 17� 27� AS1PDF36G ( )( ) 2,287. 2,404.
Order Code
Example: AS1 SPDFG 612 612
AS1 PedestalS DepthPDF ConfigurationG Floorstanding612 Finish for case612 Finish for fronts
Specification Information
Specify painted finish for case andfor fronts.
Veneer finishes for pedestal frontsare available through CustomProduct Development.
All pedestals include front lock withKnollKey lock system. Personaldrawer is 4�H. Data drawer is 7�H.File drawers are 11�H.Deep file drawers include filesupport for letter (width) or legal(depth) suspended file folders.All drawers have full extension, ballbearing drawer slides.
Application Notes
Floorstanding pedestals includelevelling glides and open top tosupport one end of a worksurface at28�H. 18�D pedestals fit under anyCurrents worksurface with standardstiffener. Deep floorstandingpedestals fit under Currentsworksurfaces for Morrison withproperly sized replacementworksurface stiffener.
Pedestals may not be used infreestanding applications.
Currents
102
Pedestal accessoriespencil tray, drawer divider, file support rail, bumper kits
description type w d h pattern no. price
Pencil tray Personal or data drawer 131/4� 57/8� 1� AS2 PT(C) $50.Personal or data drawer 131/4� 57/8� 1� AS2 PT(N) 43.
Drawer divider Personal or data drawer MD6-BD 48.
File support rail File drawer, set of 2 MD6-FS 17.
Bumper kits for mobile pedestal 21�H pedestal 21� AS1 BKL 50.26�H pedestal 26� AS1 BKH 62.
Order Code
Example: AS2 PT
AS2 PedestalPT Pencil tray
Specification Information
Pencil tray is molded plastic and isavailable in black or clear.Black : NClear : C
Drawer divider is black paintedsteel.
Replacement worksurface stiffenersare black painted steel.
Bumper kit is trim grey plastic.
Application Notes
Pencil tray sets in top of personal ordata drawer. Moveable dividersorganize pencils, pens, and paperclips in separate compartments.
Drawer divider mounts in slots inbottom of personal or data drawer.U-shaped divider supports two rowsof four CDs with titles visible indata drawer.
File support spans width of filedrawer to support side-to-side letteror legal width suspended files.
Bumper kit protects back corners ofmobile pedestals and adjacentfurniture. Bumper kit includes twocorner-bead shape extrusions withself-adhesive backer.
Currents
103
Floo
rsta
ndin
gst
orag
e
Pedestal accessoriescushionfabric
Description type w d pattern no. ACOM
B C D E F G H I
Cushion Deep 15� 23� AS1 DPAD ( ) $261. $293. $343. $359. $394. $427. $474. $523. $541.Standard 15� 17� AS1 SPAD ( ) 212. 244. 279. 293. 312. 343. 375. 427. 442.
Order Code
Example: AS1 SPAD
AS1 PedestalS DepthPAD Cushion
Specification Information
There is a $79 upcharge on CAL133backing on the cushion.
Pedestal cushions are upholstered(from the front to the back of thepedestal) with the fabric directionmatching the textile sample.
Application Notes
Pedestal cushions are for use onCurrents open top mobile pedestalsas well as on open top mobilepedestals in other Knoll systemslines.
For Customers Own Material (COM)applications, specify .75 yards offabric for 17 inch deep mobilepedestal seat cushions, and .90yards for 23 inch deep seat cushion.
Currents
104
Pedestal accessoriescushionleather
Description type w d pattern no.COL
U V W X Y
Cushion Deep 15� 23� AS1 DPAD ( ) $523. $622. $767. $803. $848.Standard 15� 17� AS1 SPAD ( ) 409. 490. 604. 622. 654.
Order Code
Example: AS1 SPAD
AS1 PedestalS DepthPAD Cushion
Specification Information
There is a $108 upcharge forperforated leather.
Application Notes
Pedestal cushions are for use onCurrents open top mobile pedestalsas well as on open top mobilepedestals in other Knoll systemslines.
For Customers Own Leather (COL)applications, specify 11.5 sq. feet ofleather for 17 inch deep mobilepedestal seat cushions, and 14.5 sq.feet for 23 inch deep seat cushion.
Currents
105
Floo
rsta
ndin
gst
orag
e
Vertical storage cabinetsReuter rotating door cabinets
description type w d h pattern no. laminate paint
Cabinet, left opening door painted top 21� 24� 48� A2 R48 LP ( )( )( )( ) $3,692.21� 24� 64� A2 R64 LP ( )( )( )( ) 4,171.
worksurface top, plastic laminate 21� 24� 48� A2 R48 LL ( )( )( )( ) 4,010. n/a
Cabinet, right opening door painted top 21� 24� 48� A2 R48 RP ( )( )( )( ) 3,692.21� 24� 64� A2 R64 RP ( )( )( )( ) 4,171.
worksurface top, plastic laminate 21� 24� 48� A2 R48 RL ( )( )( )( ) 4,010. n/a
Accessories shelf insert A1 R1 SI 161.
Replacement top left A1 RTOPL ( )( ) 396. 314.right A1 RTOPR ( )( ) 396. 314.
Order Code
Example: A2R 64 LP 117 117 117G
A2R Reuter vertical storage64 HeightL Left doorP Painted top117 Top finish117 Case finish117 Front finishG Glides
Specification Information
For cabinets, specify:
Top finishCase finishFront finish
Casters/glides:C CastersG Glides
For replacement tops, specify:
Top typeP PaintedL Plastic laminate
Worksurface top edges are trim greyT-mold.
Veneer finishes for rotating doorcabinets are available throughCustom Product Development.
Application Notes
Rotating door cabinets are portableenclosed freestanding storage.Cabinets feature full-height door,two file drawer frames, and aprotected 41/2�W wardrobe area.48�H includes one adjustable shelf,64�H includes two shelves.
Cabinet top is painted finish. 48�Hcabinet is also available with plasticlaminate or veneer worksurface top.Cabinets with veneer front areavailable with painted or veneer toponly.
Additional shelves may be specifiedseparately.
Painted front cabinets may bechanged from left-hand toright-hand in field but replacementtop is required.
Cabinet width is designed to enableopen door in 24�W footprint.
Currents
106
Vertical storage cabinetsReuter options rotating door cabinets
description type w d h pattern no. laminate paint
Cabinet, left opening door painted top 21� 24� 48� A2L 48 LP ( )( )( )( ) $3,174.21� 24� 64� A2L 64 LP ( )( )( )( ) 3,644.
worksurface top, plastic laminate 21� 24� 48� A2L 48 LL ( )( )( )( ) 3,486. n/a
Cabinet, right opening door painted top 21� 24� 48� A2L 48 RP ( )( )( )( ) 3,174.21� 24� 64� A2L 64 RP ( )( )( )( ) 3,644.
worksurface top, plastic laminate 21� 24� 48� A2L 48 RL ( )( )( )( ) 3,486. n/a
Accessories shelf insert A1 R1 SI 161.
Replacement top left A1 RTOPL ( )( ) 396. 314.right A1 RTOPR ( )( ) 396. 314.
Order Code
Example: A2L 64 LP 117 117 117G
A2L Reuter vertical storage64 HeightL Left doorP Painted top117 Top finish117 Case finish117 Front finishG Glides
Specification Information
For cabinets, specify:
Top finishCase finishFront finish
Casters/glides:C CastersG Glides
For replacement tops, specify:
Top typeP PaintedL Plastic laminate
Worksurface top edges are trim greyT-mold.
Veneer finishes for rotating doorcabinets are available throughCustom Product Development.
Application Notes
Rotating door cabinets are portableenclosed freestanding storage.Cabinets feature full-height door,two file drawer frames, and aprotected 41/2�W wardrobe area.48�H includes one adjustable shelf,64�H includes two shelves.
Cabinet top is painted finish. 48�Hcabinet is also available with plasticlaminate or veneer worksurface top.Cabinets with veneer front areavailable with painted or veneer toponly.
Additional shelves may be specifiedseparately.
Painted front cabinets may bechanged from left-hand toright-hand in field but replacementtop is required.
Cabinet width is designed to enableopen door in 24�W footprint.
Currents
107
Floo
rsta
ndin
gst
orag
e
Reuter overhead cabinetdesk, wall, or other Knoll system mountedDesigned by Robert Reuter
description type w d h pattern no. P1 P2 P3
Enclosed cabinet, with lock (no mountinghardware) - One door
24� 141/4� 143/4� RO3-N24( )( )L $986. $986. $1,033.30� 141/4� 143/4� RO3-N30( )( )L 1,096. 1,096. 1,156.36� 141/4� 143/4� RO3-N36( )( )L 1,267. 1,267. 1,334.42� 141/4� 143/4� RO3-N42( )( )L 1,472. 1,472. 1,548.48� 141/4� 143/4� RO3-N48( )( )L 1,644. 1,644. 1,724.
Enclosed cabinet, with lock (no mountinghardware) - Two doors
60� 141/4� 143/4� RO3-N60( )( )L 2,081. 2,081. 2,187.66� 141/4� 143/4� RO3-N66( )( )L 2,279. 2,279. 2,386.72� 141/4� 143/4� RO3-N72( )( )L 2,433. 2,433. 2,555.
Enclosed cabinet, no lock (no mountinghardware) - One door
24� 141/4� 143/4� RO3-N24( )( )N 884. 884. 927.30� 141/4� 143/4� RO3-N30( )( )N 1,004. 1,004. 1,052.36� 141/4� 143/4� RO3-N36( )( )N 1,173. 1,173. 1,231.42� 141/4� 143/4� RO3-N42( )( )N 1,378. 1,378. 1,445.48� 141/4� 143/4� RO3-N48( )( )N 1,545. 1,545. 1,625.
Enclosed cabinet, no lock (no mountinghardware) - Two doors
60� 141/4� 143/4� RO3-N60( )( )N 1,887. 1,887. 1,982.66� 141/4� 143/4� RO3-N66( )( )N 2,079. 2,079. 2,184.72� 141/4� 143/4� RO3-N72( )( )N 2,243. 2,243. 2,355.
Order Code
Example: RO3-N48-613-613-L
RO3 Reuter overhead cabinetN No brackets48 Width613 Case finish613 Front finishL With lock
Specification Information
Specify finish for case and door.
Application Notes
Reuter storage is a universalproduct applicable on Knollsystems.
Cabinet door rotates above cabineton side pivots, counterbalanced bytwo pneumatic cylinders. Two-doorcabinets have center divider andfour pneumatic cylinders.Verticalinterior partitions may be positionedon 11/2� increments of widthanywhere across shelf, 11/2� in fromeach side. Vertical partitionscontain cutouts for mounting up tofive horizontal partitions at 2�increments on either or both sides.
Horizontals are suspended betweentwo verticals, and may be positionedend-to-end in any combination up to3� less than cabinet width.Available in sets of 10; 6�, 9�, 12�,15� widths.
Order locks for overheads with aKnollKey order form. Please notethat Reuter overhead cabinets 60�Wor wider require two lock cores.
Reuter overhead doors without locksinclude black, Knoll-logo insert, inthe same position. Insert may beremoved to retrofit a lock later.
Currents
108
Reuter open overheadDesigned by Robert Reuter
description type w d h pattern no. black P1 P2 P3
Open overhead Morrison panel brackets 30� 13� 143/4� RO3-OM30( ) $725. $725. $762.36� 13� 143/4� RO3-OM36( ) 832. 832. 869.42� 13� 143/4� RO3-OM42( ) 938. 938. 986.48� 13� 143/4� RO3-OM48( ) 1,040. 1,040. 1,095.60� 13� 143/4� RO3-OM60( ) 1,214. 1,214. 1,273.72� 13� 143/4� RO3-OM72( ) 1,428. 1,428. 1,499.
Open overhead no mounting hardware 30� 13� 143/4� RO3-ON30( ) 705. 705. 738.36� 13� 143/4� RO3-ON36( ) 806. 806. 848.42� 13� 143/4� RO3-ON42( ) 917. 917. 963.48� 13� 143/4� RO3-ON48( ) 1,024. 1,024. 1,073.60� 13� 143/4� RO3-ON60( ) 1,191. 1,191. 1,253.72� 13� 143/4� RO3-ON72( ) 1,403. 1,403. 1,473.
Interior partitions Vertical, set of 5 – 11� 12� RO3-VP 125.
Horizontal, set of 10 6� 11� – RO1-HP6 193.9� 11� – RO1-HP9 242.12� 11� – RO1-HP12 288.15� 11� – RO1-HP15 336.
Door retrofit kit, with lock For open overhead 30� RO3-RD30( )L 492. 492. 520.36� RO3-RD36( )L 533. 533. 559.42� RO3-RD42( )L 623. 623. 652.48� RO3-RD48( )L 681. 681. 712.60� RO3-RD60( )L 1,038. 1,038. 1,093.72� RO3-RD72( )L 1,168. 1,168. 1,225.
Door retrofit kit, no lock For open overhead 30� RO3-RD30( )N 377. 377. 396.36� RO3-RD36( )N 436. 436. 457.42� RO3-RD42( )N 527. 527. 551.48� RO3-RD48( )N 583. 583. 611.60� RO3-RD60( )N 846. 846. 891.72� RO3-RD72( )N 977. 977. 1,029.
Order Code
Example: RO3-ON30-612
RO3-O Reuter open overheadN No mounting hardware30 Width612 Finish
Specification Information
Specify finish for case and door.
Application Notes
Interior partitions are black paintedsteel finish.
Door retrofit kits convert an openoverhead to an enclosed cabinet andinclude Reuter overhead door, leftand right arm mechanisms, and lockor lock plug.
Reuter storage is a universalproduct applicable on Morrison orother Knoll systems. Openoverheads may be mounted on anycombination of vertical panels thesame width or up to 12� less thanshelf width.
Reuter open overheads may bedesk-mounted, mounted on otherKnoll systems, cantilevered abovepanels, or wall-mounted. Specifyopen overhead with no mountinghardware and brackets separately.
Vertical interior partitions may bepositioned on 11/2� increments ofwidth anywhere across shelf, 11/2� infrom each side. Vertical partitionscontain cutouts for mounting threehorizontal partitions at 2�increments on either or both sides.Horizontals are suspended betweentwo verticals, and may be positionedend-to-end in any combination up to3� less than shelf width. Availablein sets of 10; 6�, 9�, 12�, 15� widths.
Currents
109
Ser
vice
Wal
l-mou
nted
stor
age
and
light
ing
Reuter open shelfDesigned by Robert Reuter
description type w d h pattern no. black P1 P2 P3
Open shelf Morrison panel brackets 24� 13� 8� RS1-M24( ) $445. $445. $469.30� 13� 8� RS1-M30( ) 488. 488. 513.36� 13� 8� RS1-M36( ) 551. 551. 580.42� 13� 8� RS1-M42( ) 596. 596. 625.48� 13� 8� RS1-M48( ) 639. 639. 670.60� 13� 8� RS1-M60( ) 747. 747. 784.
Open shelf no mounting hardware 24� 13� 8� RS1-N24( ) 425. 425. 445.30� 13� 8� RS1-N30( ) 470. 470. 492.36� 13� 8� RS1-N36( ) 533. 533. 559.42� 13� 8� RS1-N42( ) 575. 575. 602.48� 13� 8� RS1-N48( ) 618. 618. 649.60� 13� 8� RS1-N60( ) 725. 725. 762.
Interior partitions Vertical, set of 5 – 12� 6� RS1-VP 117.
Horizontal, set of 10 6� 12� – RO1-HP6 193.9� 12� – RO1-HP9 242.12� 12� – RO1-HP12 288.15� 12� – RO1-HP15 336.
Order Code
Example: RS1-N48-612
RS1 Reuter shelfN No mounting hardware48 Width612 Finish
Specification Information
Specify paint finishes for shelf.
Application Notes
Interior partitions are black paintedsteel finish.
Reuter storage is a universalproduct applicable on Morrison orother Knoll systems.
Open shelves may be mounted onany combination of vertical panelsthe same width. Reuter openshelves may be Morrison Networkdesk-mounted, mounted on otherKnoll systems, cantilevered abovepanels, or wall-mounted. SpecifyReuter shelves with no mountinghardware, and brackets separately.
Vertical interior partitions may bepositioned on 11/2� increments ofwidth anywhere across shelf, 11/2� infrom each side. Vertical partitionscontain cutouts for mounting threehorizontal partitions at 2�increments on either or both sides.Horizontals are suspended betweentwo verticals, and may be positionedend-to-end in any combination up to3� less than shelf width. Availablein sets of 10; 6�, 9�, 12�, 15� widths.
Currents
110
Reuter ganging bracketwall-mounting options and ADA pullDesigned by Robert Reuter
description type w d h pattern no. black
Ganging bracket RO1-GB $17.
ADA pull RO1-PULL 70.
Order Code
Example: RO1-GB
RO1 Reuter overheadGB Ganging bracket
Specification Information
Wall mount frames are paintedblack finish.
ADA pull is stainless steel.
Application Notes
Wall mount frames secure Reuteroverhead cabinet or shelf to wall(frame/wall mounting hardware isnot included). Frame is concealedbehind storage. Use twoRO1-WMF2 to wall-mount 66�- and72�-wide Reuter overheads.
Reuter open shelves 66� and 72�Ware for stanchion support only.
Wall mount wire manager istwo-part wire concealment kit, 22�H(medium grey only).
Ganging bracket joins adjacentReuter overheads or shelves foradditional stiffness and alignmentwhen storage is planned on only oneside of a panel run.
ADA pull mounts to Reuter paintedfront overhead door to allow seatedusers to close door easily. Specifyone for each cabinet 24� - 48�, twofor cabinets 60� - 72�.
ADA pull cannot be mounted onwood front Reuter doors.
Currents
111
Ser
vice
Wal
l-mou
nted
stor
age
and
light
ing
Overhead brackets
description type w d h pattern no. black paint
Morrison Options and Series 2 Morrison overheaddownmount brackets and back panel (64�H wallonly)
24� AA1LO24DN( ) $321.30� AA1LO30DN( ) 331.36� AA1LO36DN( ) 339.42� AA1LO42DN( ) 349.48� AA1LO48DN( ) 357.
Morrison shelf downmount brackets (64�H wallonly)
AA1RSXDN ( ) 230.
Reuter overhead brackets Downmount brackets (pair) (64�H wall only) AA1RODN( ) 276.Extended upmount brackets (pair) (39�H wall) AA1ROXUP( ) 525.Upmount brackets (pair) AA1ROUP( ) 262.
Reuter shelf brackets Extended downmount brackets (pair) (64�H wallonly)
AA1RSXDN( ) 230.
Reuter shelf adapter brackets RS1 MPB 54.Shelf downmount brackets (pair) (39�H or 48�Hwall only)
AA1RSDN( ) 276.
Shelf extended upmount brackets (pair) (39�Hwall)
AA1RSXUP( ) 550.
Shelf upmount brackets (pair) AA1RSUP( ) 276.
Order Code
Example: AA1 LO48 DN 612
AA1 Currents accessoryLO Options overhead48 SizeDN Configuration612 Finish
Specification Information
Specify painted finish for shelfdownmount brackets and overheaddownmount kit.
Application Notes
Morrison downmount bracketssupport Morrison or Options shelvesand brackets on 64�H Service Wall.
Overhead downmount bracket kitsinclude back panel and brackets tosuspend Options overhead cabinetsfrom 64�H Service Wall crown.
Reuter upmount brackets attachoverhead cabinet or shelf anywherealong Service Wall crown, lifting 1�above nominal Service Wall height.Extended upmount brackets lift selfto 10� above nominal Service Wallheight.
Downmount brackets attachoverheads within the upper 16� of64�H Service Walls and openshelves within the upper 9� of 48� or39�H Service Walls.
Specify an extra bracket (one-halfpair) for center support of overheadcabinets wider than 60� and shelveswider than 54�.
Upmount or downmount bracketsmay be inset to permit overhead toextend 1� or 3� and shelf to extend3� beyond the end of the ServiceWall at T-ends.
Extended downmount bracketsenable the Reuter open shelf to bemounted from 49�-56�H on 64�Service Wall. Specify shelf adapterbrackets separately.
For brackets for use withDividendsHorizon and Series 2 forDividends overheads, please consultthe Dividends Horizon price list.
Currents
112
Task Lights for Reuter Overhead Storage
description type w d h pattern no. list
T5 Standard Task Light Use with 24� and wider overhead 19� 4� 11/2� RTAT5E19S $300.Use with 30� and wider overhead 25� 4� 11/2� RTAT5E25S 322.Use with 42� and wider overhead 37� 4� 11/2� RTAT5E37S 348.Use with 60� and wider overhead 49� 4� 11/2� RTAT5E49S 376.Use with 66� and wider overhead 61� 4� 11/2� RTAT5E61S 401.
T5 Advanced Task Light Use with 30� and wider overhead 25� 4� 11/2� RTAT5E25A 556.Use with 42� and wider overhead 37� 4� 11/2� RTAT5E37A 586.Use with 60� and wider overhead 49� 4� 11/2� RTAT5E49A 607.Use with 66� and wider overhead 61� 4� 11/2� RTAT5E61A 633.
LED Task Light Use with 24� and wider overhead (24 LED’s) 17� 2� 1/2� ML4L17 576.Use with 36� and wider overhead (48 LED’s) 31� 2� 1/2� ML4L31 959.Use with 48� and wider overhead (72 LED’s) 44� 2� 1/2� ML4L44 1,251.Use with 66� and wider overhead (96 LED’s) 58� 2� 1/2� ML4L58 1,571.
Order Code
T5 Standard Task Light
Example: RTAT5E25S
RTA Task LightT5 T5 lampE Electronic ballast25 WidthS StandardLED Task Light
Example: ML4L17ML4 Task LightL LED17 Width
Specification Information
T5 Task Lights:120v and includes T5 cool white(4100K) fluorescent lamp,electronic ballast, 9� groundedcordset, prismatic lens, rockerswitch, one cord exit managementclip and mounting hardware.Housings are black.
LED Task Lights:Includes LED’s, power supply with9-12’ cord and mounting hardware.Housings are clear anodizedaluminum with white colorend-caps.
Application Notes
T5 Task Lights:Specify suffix -CH and add $45 listfor City of Chicago installations.Example: DL3T5E25S-CH
Cordset is center exit. On smallerunits cord exit is off-center, but stillnot handed.
T5 advanced task lights are fittedwith ballasts and lamps compliantwith LEED requirements, meetingthe LEED EB standard for mercurycontent.
Notes:All task lights mount into the recessin the underside of overheadcabinets and shelves at least 6�wider than task light width.
All task lights are TCLP compliantand meet requirements of CaliforniaTitle 20 and Title 24.
Currents
113
Ser
vice
Wal
l-mou
nted
stor
age
and
light
ing
Counter surfacecounter surface
description w d h pattern no. lam. paint
Counter surface 36� 12� 1� AW1 CS3612 ( ) $288.48� 12� 1� AW1 CS4812 ( ) 321.60� 12� 1� AW1 CS6012 ( ) 353.72� 12� 1� AW1 CS7212 ( ) 386.
Counter surface bracket kit AB1 CS ( ) 288.
Order Code
Example: AA1 PS24 612
AA1 Currents accessoryPS Personal shelf24 Width612 Finish
Specification Information
Specify surface finish for counter.
Specify paint finish for countersurface brackets.
Veneer finishes for counter surfaceare available through CustomProduct Development.
Application Notes
Counter surface with curved front isdesigned to mount on either side of39�H Service Wall with standard 4�crown with counter surfacebrackets. Kit includes two bracketsand center support.
Currents
114
Deskspin-set adjustableextended left
description w (l) w (r) h pattern no. lam.
24�D both sides corner desk, extended left 60� 36� 24-30� AD C53 SF ( )( )( ) $2,210.60� 48� 24-30� AD C54 SF ( )( )( ) 2,376.72� 36� 24-30� AD C63 SF ( )( )( ) 2,376.72� 48� 24-30� AD C64 SF ( )( )( ) 2,537.84� 48� 24-30� AD C74 SF ( )( )( ) 2,700.
30�D left/24�D right corner desk, extended left 60� 48� 24-30� AD C54 LF ( )( )( ) 2,502.72� 48� 24-30� AD C64 LF ( )( )( ) 2,667.84� 48� 24-30� AD C74 LF ( )( )( ) 2,827.
30�D both sides corner desk, extended left 60� 48� 24-30� AD C54 DF ( )( )( ) 2,634.72� 48� 24-30� AD C64 DF ( )( )( ) 2,798.84� 48� 24-30� AD C74 DF ( )( )( ) 2,958.
Order Code
Example: AD C64 LF 117 117 G
AD DeskC Shape6 Width left4 Width rightL Depth (30�D left)F Base type117 Desktop finish117 Desk base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left/width right:3 36�4 48�5 60�6 72�7 84�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:F Manually adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify glides/casters:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Desks incorporate universalworksurface and adjustable C legs.Pin-set desk surface can be set atinstallation from 24� - 30� high, in1� increments.
Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.
Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector space along backedges. Clearance underworksurfaces (for pedestals,BackPack or other accessories) is18�.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Desks accept clamp-on workshelvesand privacy screens.
Currents C-Legs mount withmachine screws into metal insertson the underside of Currentsworksurfaces.
Currents
115
Des
ksan
dw
orkt
able
s
Deskspin-set adjustableextended right
description w(l) w(r) h pattern no. lam.
24�D both sides corner desk, extended right 36� 60� 24-30� AD C35 SF ( )( )( ) $2,210.36� 72� 24-30� AD C36 SF ( )( )( ) 2,376.48� 60� 24-30� AD C45 SF ( )( )( ) 2,376.48� 72� 24-30� AD C46 SF ( )( )( ) 2,537.48� 84� 24-30� AD C47 SF ( )( )( ) 2,700.
30�D right/24�D left corner desk, extended right 48� 60� 24-30� AD C45 RF ( )( )( ) 2,502.48� 72� 24-30� AD C46 RF ( )( )( ) 2,667.48� 84� 24-30� AD C47 RF ( )( )( ) 2,827.
30�D both sides 48� 60� 24-30� AD C45 DF ( )( )( ) 2,634.48� 72� 24-30� AD C46 DF ( )( )( ) 2,798.48� 84� 24-30� AD C47 DF ( )( )( ) 2,958.
Order Code
Example: AD C46 SF 117 117 G
AD DeskC Shape4 Width left6 Width rightS Depth (24� both sides)F Base type117 Desktop finish117 Desk base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left/width right:3 36�4 48�5 60�6 72�7 84�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:F Manually adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify glides/casters:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Desks incorporate universalworksurface and adjustable C legs.Pin-set desk surface can be set atinstallation from 24� - 30� high, in1� increments.
Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.
Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector space along backedges. Clearance underworksurfaces (for pedestals,BackPack or other accessories) is18�.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Desks accept clamp-on workshelvesand privacy screens.
Currents C-Legs mount withmachine screws into metal insertson the underside of Currentsworksurfaces.
Currents
116
Deskspin-set adjustablecorner desk
description w(l) w(r) h pattern number lam.
24�D both sides corner desk 42� 42� 24-30� AD C4242 SF ( )( )( ) $2,126.48� 48� 24-30� AD C44 SF ( )( )( ) 2,210.60� 60� 24-30� AD C55 SF ( )( )( ) 2,456.
30�D left/24�D right corner desk 42� 42� 24-30� AD C4242 LF ( )( )( ) 2,177.48� 48� 24-30� AD C44 LF ( )( )( ) 2,257.60� 60� 24-30� AD C55 LF ( )( )( ) 2,502.
24�D left/30�D right corner desk 42� 42� 24-30� AD C4242 RF ( )( )( ) 2,177.48� 48� 24-30� AD C44 RF ( )( )( ) 2,257.60� 60� 24-30� AD C55 RF ( )( )( ) 2,502.
30�D both sides corner desk 42� 42� 24-30� AD C4242 DF ( )( )( ) 2,225.48� 48� 24-30� AD C44 DF ( )( )( ) 2,308.60� 60� 24-30� AD C55 DF ( )( )( ) 2,550.
Order Code
Example: AD C44 LF 117 117 G
AD DeskC Shape4 Width left4 Width rightL Depth (30�D left)F Base type117 Desktop finish117 Desk base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left/width right:4 48�5 60�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:F Manually adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify glides/casters:C Rear castersG Glides
Worksurface edges are trim grey.Clear Maple not available on 60�Wx 60�D corner desks.
Application Notes
Desks incorporate universalworksurface and adjustable C legs.Pin-set desk surface can be set atinstallation from 24� - 30� high, in1� increments.
Corner desks provide up to 45�diagonal depth for large monitors,keyboard and mouse. Nominalworksurface depths include 13/4�cable/connector space along backedge. Clearance under worksurfaces(for pedestals, BackPack or otheraccessories) is 18�.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Desks accept clamp-on workshelvesand privacy screens.
Currents C-Legs mount withmachine screws into metal insertson the underside of Currentsworksurfaces.
Currents
117
Des
ksan
dw
orkt
able
s
Deskspin-set adjustablestraight desk
description w(l) w(r) h pattern number lam.
24�D straight desk, curved front 36� 24� 24-30� AD S36 SF ( )( )( ) $1,375.42� 24� 24-30� AD S42 SF ( )( )( ) 1,409.48� 24� 24-30� AD S48 SF ( )( )( ) 1,438.60� 24� 24-30� AD S60 SF ( )( )( ) 1,506.72� 24� 24-30� AD S72 SF ( )( )( ) 1,570.84� 24� 24-30� AD S84 SF ( )( )( ) 1,634.
30�D straight desk, curved front 36� 30� 24-30� AD S36 DF ( )( )( ) 1,520.42� 30� 24-30� AD S42 DF ( )( )( ) 1,554.48� 30� 24-30� AD S48 DF ( )( )( ) 1,587.60� 30� 24-30� AD S60 DF ( )( )( ) 1,669.72� 30� 24-30� AD S72 DF ( )( )( ) 1,766.
Order Code
Example: AD S48 DF 117 117 G
AD DeskS Shape48 WidthD DepthF Base type117 Desktop finish117 Desk base finishG Glides
Specification Information
Specify desk shape:S Straight
Worksurface depth:S 24�D both sidesD 30�D both sides
Base type:F Manually adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify glides/casters:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Desks incorporate universalworksurface and adjustable C legs.Pin-set desk surface can be set atinstallation from 24� - 30� high, in1� increments.
Straight desks have slightly curvedfront edges, to a maximum of 1�extra depth at the center. Nominalworksurface depths include 13/4�cable/connector space along backedge. Clearance under worksurfaces(for pedestals, BackPack or otheraccessories) is 18�.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Desks accept clamp-on workshelvesand privacy screens.
Currents C-Legs mount withmachine screws into metal insertson the underside of Currentsworksurfaces.
Currents
118
Deskshandcrank adjustableextended left
description w(l) w(r) h pattern no. lam.
24�D both sides corner desk, extended left 60� 36� 24-34� AD C53 SH ( )( )( ) $3,351.60� 48� 24-34� AD C54 SH ( )( )( ) 3,516.72� 36� 24-34� AD C63 SH ( )( )( ) 3,516.72� 48� 24-34� AD C64 SH ( )( )( ) 3,681.84� 48� 24-34� AD C74 SH ( )( )( ) 3,846.
30�D left/24�D right corner desk, extended left 60� 48� 24-34� AD C54 LH ( )( )( ) 3,649.72� 48� 24-34� AD C64 LH ( )( )( ) 3,812.84� 48� 24-34� AD C74 LH ( )( )( ) 3,974.
30�D both sides corner desk, extended left 60� 48� 24-34� AD C54 DH ( )( )( ) 3,649.72� 48� 24-34� AD C64 DH ( )( )( ) 3,812.84� 48� 24-34� AD C74 DH ( )( )( ) 3,974.
Order Code
Example: AD C53 SH 117 117 G
AD DeskC Shape5 Width left3 Width rightS DepthH Base type117 Desktop finish117 Base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left, width right:3 36�4 48�5 60�6 72�7 84�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:H Handcrank adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge. Handcrank is located on theextended side of desks.
Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement. Crossbeam stiffenslegs through upper height range.Crossbeam is 4�H, 14� above floor.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.
Handcrank mechanism is rated at300 lbs. maximum weight.
Desks accept clamp-on workshelvesand privacy screens.
Currents C-Legs mount withmachine screws into metal insertson the underside of Currentsworksurfaces.
Currents
119
Des
ksan
dw
orkt
able
s
Deskshandcrank adjustableextended right
description w(l) w(r) h pattern no. lam.
24�D both sides corner desk, extended right 36� 60� 24-34� AD C35 SH ( )( )( ) $3,351.36� 72� 24-34� AD C36 SH ( )( )( ) 3,516.48� 60� 24-34� AD C45 SH ( )( )( ) 3,516.48� 72� 24-34� AD C46 SH ( )( )( ) 3,681.48� 84� 24-34� AD C47 SH ( )( )( ) 3,846.
30�D right/24�D left corner desk, extended left 48� 60� 24-34� AD C45 RH ( )( )( ) 3,649.48� 72� 24-34� AD C46 RH ( )( )( ) 3,812.48� 84� 24-34� AD C47 RH ( )( )( ) 3,974.
30�D both sides corner desk, extended left 48� 60� 24-34� AD C45 DH ( )( )( ) 3,649.48� 72� 24-34� AD C46 DH ( )( )( ) 3,812.48� 84� 24-34� AD C47 DH ( )( )( ) 3,974.
Order Code
Example: AD C35 SH 117 117 G
AD DeskC Shape3 Width left5 Width rightS DepthH Base type117 Desktop finish117 Base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left, width right:3 36�4 48�5 60�6 72�7 84�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:H Handcrank adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge. Handcrank is located on theextended side of desks.
Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement. Crossbeam stiffenslegs through upper height range.Crossbeam is 4�H, 14� above floor.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.
Handcrank mechanism is rated at300 lbs. maximum weight.
Desks accept clamp-on workshelvesand privacy screens.
Currents C-Legs mount withmachine screws into metal insertson the underside of Currentsworksurfaces.
Currents
120
Deskshandcrank adjustablecorner desk
description w(l) w(r) h pattern no. lam.
24�D both sides corner desk 42� 42� 24-34� AD C4242 SH ( )( )( ) $3,211.48� 48� 24-34� AD C44 SH ( )( )( ) 3,351.60� 60� 24-34� AD C55 SH ( )( )( ) 3,596.
30�D left/24�D right corner desk 42� 42� 24-34� AD C4242 LH ( )( )( ) 3,257.48� 48� 24-34� AD C44 LH ( )( )( ) 3,399.60� 60� 24-34� AD C55 LH ( )( )( ) 3,649.
24�D left/30�D right corner desk 42� 42� 24-34� AD C4242 RH ( )( )( ) 3,257.48� 48� 24-34� AD C44 RH ( )( )( ) 3,399.60� 60� 24-34� AD C55 RH ( )( )( ) 3,649.
30�D both sides corner desk 48� 48� 24-34� AD C44 DH ( )( )( ) 3,452.60� 60� 24-34� AD C55 DH ( )( )( ) 3,699.
Order Code
Example: AD C44 SH 117 117 G
AD DeskC Shape4 Width left4 Width rightS DepthH Base type117 Desktop finish117 Base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left, width right:4 48�5 60�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:H Handcrank adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify:C Rear castersG Glides
Worksurface edges are trim grey.Clear Maple is not available on60�W x 60�D corner desks.
Application Notes
Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.
Corner desks provide up to 45�diagonal depth for large monitors,keyboard and mouse. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.
Handcrank mechanism is rated at300 lbs. maximum weight.
Desks accept clamp-on workshelvesand privacy screens.
Currents C-Legs mount withmachine screws into metal insertson the underside of Currentsworksurfaces.
Currents
121
Des
ksan
dw
orkt
able
s
Deskshandcrank adjustablestraight desk
description w(l) w(r) h pattern no. lam.
24�D straight desk, curved front 36� 24� 24-34� AD S36 SH ( )( )( ) $2,189.42� 24� 24-34� AD S42 SH ( )( )( ) 2,224.48� 24� 24-34� AD S48 SH ( )( )( ) 2,257.60� 24� 24-34� AD S60 SH ( )( )( ) 2,322.72� 24� 24-34� AD S72 SH ( )( )( ) 2,388.84� 24� 24-34� AD S84 SH ( )( )( ) 2,456.
30�D straight desk, curved front 36� 30� 24-34� AD S36 DH ( )( )( ) 2,339.42� 30� 24-34� AD S42 DH ( )( )( ) 2,376.48� 30� 24-34� AD S48 DH ( )( )( ) 2,402.60� 30� 24-34� AD S60 DH ( )( )( ) 2,490.72� 30� 24-34� AD S72 DH ( )( )( ) 2,584.
Order Code
Example: AD S48 DH 117 117 G
AD DeskS Shape48 WidthD DepthH Base type117 Desktop finish117 Base finishG Glides
Specification Information
Specify desk shape:S Straight
For straight desks specify:Width:36 36�42 42�48 48�60 60�72 72�84 84�
Worksurface depth:S 24�DD 30�D
Base type:H Handcrank adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge. Hand crank may be installedon the left or right side of anystraight or symmetrical corner desk.
Desks may be specified with fixedfront glides and rear casters orlevelling glides with 13/4� travel.Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.
Straight desks have slightly curvedfront edges, to a maximum of 1�extra depth at the center. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.
Handcrank mechanism is rated at300 lbs. maximum weight.
Desks accept clamp-on workshelvesand privacy screens.
Currents C-Legs mount withmachine screws into metal insertson the underside of Currentsworksurfaces.
Currents
122
Above-desk lighting for desksT5 task light
description type w d h pattern no. Standard Advanced
Task Light Used with 24� and wider workshelf 19� 4� 11/2� AA2T5E19 ( ) $191. n/aUsed with 30� and wider workshelf 25� 4� 11/2� AA2T5E25 ( ) 242. 473.Used with 48� and wider workshelf 37� 4� 11/2� AA2T5E37 ( ) 270. 518.
Order Code
Example: AA2 T5E19
AA2 AccessoryT5E Task Light19 WidthS Standard
Specification Information
Specify:
Width - Task Lights mount incabinets and shelves at least 6�wider than light width.
Type:S StandardA Advanced
Specify suffix -CH and add $46 listfor City of Chicago installations.Example: AA2T5E19S-CH
All housings are black.
Application Notes
Task lights mount into the recess inthe underside of overhead cabinetsand shelves at least 6� wider thantask light width.
Task lights include T5 cool white(4100K) fluorescent lamp,electronic ballast, 9� groundedcorset, prismatic lens, rockerswitch, one cord exit managementclip and mounting hardware.
Task light cordset is center exit. Onsmaller units cord exit is off-center,but still not handed.
Task lights are TCLP compliant andmeet requirements of CaliforniaTitle 24.
Advanced task lights are fitted withballast and lamp compliant withLEED requirements.
Currents
123
Des
ksan
dw
orkt
able
s
Worktablespersonal, tripod, wiper
description type w d h pattern no. lam.
Personal worktable Adjustable 36� 28� 24-30� AT1 P36A ( )( )( ) $1,604.Fixed height 36� 28� 28� AT1 P36F ( )( )( ) 1,364.
Tripod worktable Adjustable 36� 36� 24-30� AT1 TA ( )( ) 1,965.Fixed height (low) 36� 36� 26� AT1 TL ( )( )( ) 1,364.
Small wiper Adjustable 47� 30� 24-30� AT1 W24A ( )( )( ) 2,167.Fixed height 47� 30� 28� AT1 W24F ( )( )( ) 1,364.
Order Code
Example: AT1 W24F 117 117 C
AT1 TableW Shape24 DepthF Base type117 Desktop finish117 Base finishC Casters
Specification Information
F Fixed heightA Adjustable height
Specify top and base finish.
Veneer finishes for worktables areavailable through Custom ProductDevelopment.
Specify:C CastersG Glides
Fixed height tables are 28�H exceptTripod, 26�H. Adjustable heightworktables adjust 24�-30�H inone-inch increments. Glides adjust13/4�. All casters are lockable.Worktable top edge is trim grey.
Application Notes
Worktables are independent, mobiletables designed for use with desksand panel-mounted worksurfaces.
Personal worktable is roundedrectangle shape, sized to fit withinsmall workstations. Personalworktable has center column,four-star base for clear knee spacesupport.
Tripod is rounded triangle shapedesigned to roll under Currents 48�corner desks set at 28�H.
Small wiper and half wiper areconference extensions for 24�Dworksurfaces. Medium wipercorresponds to 30�D worksurfaces.
Wiper and half wiper tables havefour legs with integral wire-managerchannels.
Currents
124
Worktablespersonal, tripod, wiper
description type w d h pattern no. lam.
Medium wiper Adjustable 54� 30� 24-30� AT1 W30A ( )( )( ) $2,244.Fixed height 54� 30� 28� AT1 W30F ( )( )( ) 1,442.
Half wiper end table
right
Left, adjustable 33� 36� 24-30� AT1 E24LA ( )( )( ) 2,167.Left, fixed height 33� 36� 28� AT1 E24LF ( )( )( ) 1,364.Right, adjustable 33� 36� 24-30� AT1 E24RA ( )( )( ) 2,167.Right, fixed height 33� 36� 28� AT1 E24RF ( )( )( ) 1,364.
Order Code
Example: AT1 W24F 117 117 C
AT1 TableW Shape24 DepthF Base type117 Desktop finish117 Base finishC Casters
Specification Information
F Fixed heightA Adjustable height
Specify top and base finish.
Veneer finishes for worktables areavailable through Custom ProductDevelopment.
Specify:C CastersG Glides
Fixed height tables are 28�H exceptTripod, 26�H. Adjustable heightworktables adjust 24�-30�H inone-inch increments. Glides adjust13/4�. All casters are lockable.Worktable top edge is trim grey.
Application Notes
Worktables are independent, mobiletables designed for use with desksand panel-mounted worksurfaces.
Personal worktable is roundedrectangle shape, sized to fit withinsmall workstations. Personalworktable has center column,four-star base for clear knee spacesupport.
Tripod is rounded triangle shapedesigned to roll under Currents 48�corner desks set at 28�H.
Small wiper and half wiper areconference extensions for 24�Dworksurfaces. Medium wipercorresponds to 30�D worksurfaces.
Wiper and half wiper tables havefour legs with integral wire-managerchannels.
Currents
125
Des
ksan
dw
orkt
able
s
Worktableshalf-round, large wiper, round
description type w d h pattern no. lam.
Half round worktable Adjustable 50� 28� 24-30� AT1 D50A ( )( )( ) $1,845.Fixed height 50� 28� 28� AT1 D50F ( )( )( ) 1,604.
Large half round worktable Adjustable 62� 30� 24-30� AT1 D62A ( )( )( ) 2,405.Fixed height 62� 30� 28� AT1 D62F ( )( )( ) 1,604.
Large wiper end table Adjustable 72� 32� 24-30� AT1 W50A ( )( )( ) 2,405.Fixed height 72� 32� 28� AT1 W50F ( )( )( ) 1,604.
Round worktable Adjustable 42� 24-30� AT1 R42A ( )( )( ) 2,244.Adjustable 48� 24-30� AT1 R48A ( )( )( ) 2,329.Fixed height 42� 28� AT1 R42F ( )( )( ) 1,442.Fixed height 48� 28� AT1 R48F ( )( )( ) 1,524.
Order Code
Example: AT1 D50F 117 117 C
AT1 TableD Shape50 DepthF Base type117 Desktop finish117 Base finishC Casters
Specification Information
F Fixed heightA Adjustable height
Specify top and base finish.
Veneer finishes for worktables areavailable through Custom ProductDevelopment.
Specify:
C CastersG Glides
Fixed height tables are 28�H.Adjustable height worktables adjust24�-30�H in one-inch increments.Glides adjust 13/4�. Worktable topedge is trim grey.
Application Notes
Worktables are independent, mobiletables designed for use with desksand panel-mounted worksurfaces.
Half round worktable aligns withback-to-back 24�D Currents desksor worksurfaces plus a Currentsscreen or Knoll systems panelbetween. Large half round tablealigns with back-to-back 30�Ddesks or worksurfaces. Large wiperis shared conference extension forback-to-back 24�D desks. All tableshave center edge offset to clearpanel end trim.
Large half-round, round, and wipertables have four legs with integralwire-manager channels. Half roundworktable has center column,three-star base for clear knee spacesupport.
Currents
126
Upstart Tablesprimary worksurfacestable desks
type application w d h pattern no. list price
Y-shape table desk, curved end (left hand shown) left 72� 28-36� 25-30� AUP Y72DCL4 ( )( )( )( ) $1,042.right 72� 28-36� 25-30� AUP Y72DCR4 ( )( )( )( ) 1,042.
M-shape table desk, curved ends 72� 30-36� 25-30� AUP M72DC4 ( )( )( )( ) 1,042.
Y-shape table desk, flat ends left 72� 28-36� 25-30� AUP Y72DFL4 ( )( )( )( ) 1,042.right 72� 28-36� 25-30� AUP Y72DFR4 ( )( )( )( ) 1,042.
M-shape table desk, flat ends 72� 31-36� 25-30� AUP M72DF4 ( )( )( )( ) 1,042.
Order Code
Example: AUP Y72DCL4 117 117117 G
A CurrentsUP UpstartY Table shape72 WidthD DepthC Curved endL Left hand4 Leg quantity117 Top finish117 Edge finish117 Leg finishG Glides
Specification Information
Specify top, edge and leg finishes.
Casters/glidesC CastersG Glides
Upstart Y and M shape tablesinclude a worksurface stiffener thatdoubles as a horizontal cablemanager.
Suspended pedestal may not beused on Upstart tables.
Application Notes
Upstart Y and M shape tablescombine computer support andadjacent work area in a basic tabledesk.
Curved end tops facilitateconferencing in open planning. Flatends plan close to system panels.Overall width is the same for curvedand flat end tops.
Upstart tops have plastic laminatesurface with continuous T-moldedge.
Upstart tables have four legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.
Adjustment range enables Upstarttables to overlap or slide underadjacent tables and worksurfaces.
Currents
127
Ups
tart
tabl
ede
sks
and
stor
age
Upstart Tablesprimary worksurfacescorner table desks
type w d h pattern no. list price
Extended corner table desk, 90° extended left 72� 48� 25-30� AUP C7248S5 ( )( )( )( ) $1,192.
Extended corner table desk, 90° extended right 48� 72� 25-30� AUP C4872S5 ( )( )( )( ) 1,192.
Corner table desk, 120° 48�, 48� 22� 25-30� AUP V48S5 ( )( )( )( ) 1,118.
Order Code
Example: AUP C7248S5 117 117117 C
A CurrentsUP UpstartC Table shape72 Width, extended left48 WidthS Depth4 Leg quantity117 Top finish117 Edge finish117 Leg finishC Casters
Specification Information
Specify top, edge and leg finishes.
Casters/glidesC CastersG Glides
Upstart extended corner and cornershape tables include worksurfacestiffeners that double as horizontalcable managers.
Suspended pedestal may not beused on Upstart tables.
Application Notes
Upstart extended corner and cornershape tables combine computersupport and adjacent work area in abasic table desk.
Upstart tops have plastic laminatesurface with continuous T-moldedge.
Upstart tables have four or five legswith 5� adjustable leveler glides or4� adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.
Adjustment range enables Upstarttables to overlap or slide underadjacent worksurfaces.
Extended corner table desks and120° corner table desk are 22� deepon each side edge. Each back edgeof 120° corner desk corresponds to48� wide Currents linkable screensconnected at a 120° angle.
Currents
128
Upstart Tablessecondary worksurfaces
type w d h pattern no. list price
Rectangular table desk, four legs 48� 22� 25-30� AUP S48S4 ( )( )( )( ) $669.48� 28� 25-30� AUP S48D4 ( )( )( )( ) 746.60� 28� 25-30� AUP S60D4 ( )( )( )( ) 820.72� 28� 25-30� AUP S72D4 ( )( )( )( ) 858.72� 36� 25-30� AUP S72E4 ( )( )( )( ) 894.
Rectangular return, two legs 48� 22� 25-30� AUP S48S2 ( )( )( )G 522.
Order Code
Example: AUP S72E4 117 117 117C
A CurrentsUP UpstartS Table shape72 WidthE Depth4 Leg quantity117 Top finish117 Edge finish117 Leg finishC Casters
Specification Information
Specify top, edge and leg finishes.
Casters/glides
C CastersG Glides
Upstart rectangular and rectangularreturn include a worksurfacestiffener that doubles as a horizontalcable manager.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Upstart tops have plastic laminatesurface with continuous T-moldedge.
Upstart tables have four or five legswith 5� adjustable leveler glides or4� adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.
Adjustment range enables Upstarttables to overlap or slide underadjacent worksurfaces.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurface at rightangle.
Currents
129
Ups
tart
tabl
ede
sks
and
stor
age
Upstart Tablesconference worksurfaces
type w d h pattern no. list price
Wiper table desk 61� 321/2� 25-30� AUP W60D4 ( )( )( )( ) $820.
Oval table desk, four legs 66� 36� 25-30� AUP O664 ( )( )( )( ) 1,042.
Round table desk, four legs 42� 25-30� AUP R424 ( )( )( )( ) 776.
Half round table desk, four legs 62� 30� 25-30� AUP D624( )( )( )( ) 820.
Tripod table, three legs 36� 36� 25-30� AUP T363( )( )( )( ) 669.
Order Code
Example: AUP O664 117 117 117G
A CurrentsUP UpstartO Table shape66 Size4 Leg quantity117 Top finish117 Edge finish117 Leg finishG Glides
Specification Information
Specify top, edge and leg finishes.
Casters/glidesC CastersG Glides
Upstart wiper, oval and half roundtables include a worksurfacestiffener that doubles as a horizontalcable manager.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Upstart conference table desks aredesigned to support conferencework in combination with otherworktables or systems furniture.
Upstart tops have plastic laminatesurface with continuous T-moldedge.
Upstart tables have four legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.
Tops adjust in height to permitconference tops to overlap or rollunder adjacent tables.
Half round corresponds toback-to-back Y-shape tables or 30�deep straight tables.
Currents
130
Upstart Tablescurved leg only
description h pattern no. Paint
Curved leg with glide 237/8� - 287/8� AUPCGV ( ) $108.
Curved leg with caster 257/8� - 297/8� AUPCCV ( ) 108.
Order Code
Example: AUPCC 114
A CurrentsUP UpstartC Curved legC Casters114 Leg finish
Specification Information
Specify:
Casters/glidesC CastersG Glides
Leg finishes, paintSee Color Program Page
Application Notes
Each curved Upstart leg comes withfour (4) metal inserts and four (4)screws.
When creating a freestanding tableusing Upstart legs, Upstart legsmust be attached using metalinserts.
Curved Upstart legs must bepositioned in accordance withBIFMA guidelines.
Upstart tables have four or fivecurved legs with 5� adjustableleveler glides or 4� adjustablecasters. Adjustment range is 27� -31� for casters and 25� - 30� forglides.
Currents
131
Ups
tart
tabl
ede
sks
and
stor
age
Plannable Upstart TablesRectangular Table Desk
description w d h pattern no. lam.
24� D 30� 235/8� 273/4� - 323/4� AUPM S30S4 ( ) G ( )( )( ) $534.36� 235/8� 273/4� - 323/4� AUPM S36S4 ( ) G ( )( )( ) 564.42� 235/8� 273/4� - 323/4� AUPM S42S4 ( ) G ( )( )( ) 596.48� 235/8� 273/4� - 323/4� AUPM S48S4 ( ) G ( )( )( ) 626.54� 235/8� 273/4� - 323/4� AUPM S54S4 ( ) G ( )( )( ) 655.60� 235/8� 273/4� - 323/4� AUPM S60S4 ( ) G ( )( )( ) 685.66� 235/8� 273/4� - 323/4� AUPM S66S4 ( ) G ( )( )( ) 718.72� 235/8� 273/4� - 323/4� AUPM S72S4 ( ) G ( )( )( ) 748.84� 235/8� 273/4� - 323/4� AUPM S84S4 ( ) G ( )( )( ) 808.
30� D 30� 295/8� 273/4� - 323/4� AUPM S30D4 ( ) G ( )( )( ) 604.36� 295/8� 273/4� - 323/4� AUPM S36D4 ( ) G ( )( )( ) 636.42� 295/8� 273/4� - 323/4� AUPM S42D4 ( ) G ( )( )( ) 666.48� 295/8� 273/4� - 323/4� AUPM S48D4 ( ) ( ) ( )( )( ) 695.54� 295/8� 273/4� - 323/4� AUPM S54D4 ( ) ( ) ( )( )( ) 731.60� 295/8� 273/4� - 323/4� AUPM S60D4 ( ) ( ) ( )( )( ) 764.66� 295/8� 273/4� - 323/4� AUPM S66D4 ( ) ( ) ( )( )( ) 782.72� 295/8� 273/4� - 323/4� AUPM S72D4 ( ) ( ) ( )( )( ) 798.84� 295/8� 273/4� - 323/4� AUPM S84D4 ( ) ( ) ( )( )( ) 889.
Order Code
Example: AUPM S72S4 AG 118114 114
A CurrentsUP UpstartM PlannableS Table Shape72 WidthS Depth4 Leg quantityA GrommetG Glides118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
24� deep rectangular table deskscan only be ordered with glides.30� deep rectangular table desks in30�, 36� and 42� width can only beordered with glides.
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart rectangular andrectangular return include aworksurface stiffener that doublesas a horizontal cable manager.
Currents
132
Plannable Upstart TablesRectangular Return
description w d h pattern no. lam.
24� D 36� 235/8� 273/4� - 323/4� AUPM S36S2 ( )( )( )( )( ) $426.42� 235/8� 273/4� - 323/4� AUPM S42S2 ( )( )( )( )( ) 457.48� 235/8� 273/4� - 323/4� AUPM S48S2 ( )( )( )( )( ) 486.60� 235/8� 273/4� - 323/4� AUPM S60S2 ( )( )( )( )( ) 587.
Order Code
Example: AUPM S36S2 AC 118114 114
A CurrentsUP UpstartM PlannableS Table Shape36 WidthS Depth2 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart rectangular andrectangular return include aworksurface stiffener that doublesas a horizontal cable manager.
Currents
133
Ups
tart
tabl
ede
sks
and
stor
age
Plannable Upstart Tablescorner
description w d h pattern no. lam.
24� D both sides corner worksurfaces 42� 42� 273/4� - 323/4� AUPM C4242S5 ( )( )( )( )( ) $915.48� 48� 273/4� - 323/4� AUPM C4848S5 ( )( )( )( )( ) 988.60� 60� 273/4� - 323/4� AUPM C6060S5 ( ) C ( )( )( ) 1,289.
30� D both sides corner worksurfaces 42� 42� 273/4� - 323/4� AUPM C4242D5 ( )( )( )( )( ) 966.48� 48� 273/4� - 323/4� AUPM C4848D5 ( )( )( )( )( ) 1,040.60� 60� 273/4� - 323/4� AUPM C6060D5 ( ) C ( )( )( ) 1,341.
Order Code
Example: AUPM C4242S5 AC 118114 114
A CurrentsUP UpstartM PlannableC Table Shape4242 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart corner andextended corner includeworksurface stiffeners that doubleas horizontal cable managers.
Currents
134
Plannable Upstart Tablesextended cornerextended left
description w d h pattern no. lam.
24� D both sides corner worksurface,extended left
60� 36� 273/4� - 323/4� AUPM C6036S5 ( )( )( )( )( ) $809.60� 42� 273/4� - 323/4� AUPM C6042S5 ( )( )( )( )( ) 883.60� 48� 273/4� - 323/4� AUPM C6048S5 ( ) C ( )( )( ) 959.72� 36� 273/4� - 323/4� AUPM C7236S5 ( )( )( )( )( ) 959.72� 42� 273/4� - 323/4� AUPM C7242S5 ( ) C ( )( )( ) 1,035.72� 48� 273/4� - 323/4� AUPM C7248S5 ( ) C ( )( )( ) 1,111.84� 48� 273/4� - 323/4� AUPM C8448S5 ( ) C ( )( )( ) 1,260.
30� D both sides corner worksurface,extended left
60� 48� 273/4� - 323/4� AUPM C6048D5 ( ) C ( )( )( ) 1,036.72� 48� 273/4� - 323/4� AUPM C7248D5 ( ) C ( )( )( ) 1,186.84� 48� 273/4� - 323/4� AUPM C8448D5 ( ) C ( )( )( ) 1,337.
30� D left/24� D right corner worksurface,extended left
60� 42� 273/4� - 323/4� AUPM C6042L5 ( ) C ( )( )( ) 959.60� 48� 273/4� - 323/4� AUPM C6048L5 ( ) C ( )( )( ) 1,036.72� 42� 273/4� - 323/4� AUPM C7242L5 ( ) C ( )( )( ) 1,111.72� 48� 273/4� - 323/4� AUPM C7248L5 ( ) C ( )( )( ) 1,186.84� 48� 273/4� - 323/4� AUPM C8448L5 ( ) C ( )( )( ) 1,337.
Order Code
Example: AUPM C7236S5 AC 118114 114
A CurrentsUP UpstartM PlannableC Table Shape7236 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart corner andextended corner includeworksurface stiffeners that doubleas horizontal cable managers.
Currents
135
Ups
tart
tabl
ede
sks
and
stor
age
Plannable Upstart Tablesextended cornerextended left
description w d h pattern no. lam.
24� D left/30� D right corner worksurface,extended left
60� 42� 273/4� - 323/4� AUPM C6042R5 ( ) C ( )( )( ) $959.60� 48� 273/4� - 323/4� AUPM C6048R5 ( ) C ( )( )( ) 1,036.72� 42� 273/4� - 323/4� AUPM C7242R5 ( ) C ( )( )( ) 1,111.72� 48� 273/4� - 323/4� AUPM C7248R5 ( ) C ( )( )( ) 1,186.84� 48� 273/4� - 323/4� AUPM C8448R5 ( ) C ( )( )( ) 1,337.
Order Code
Example: AUPM C7236S5 AC 118114 114
A CurrentsUP UpstartM PlannableC Table Shape7236 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart corner andextended corner includeworksurface stiffeners that doubleas horizontal cable managers.
Currents
136
Plannable Upstart Tablesextended cornerextended right
description w d h pattern no. lam.
24� D both sides corner worksurface,extended right
36� 60� 273/4� - 323/4� AUPM C3660S5 ( )( )( )( )( ) $809.36� 72� 273/4� - 323/4� AUPM C3672S5 ( )( )( )( )( ) 959.42� 60� 273/4� - 323/4� AUPM C4260S5 ( )( )( )( )( ) 883.42� 72� 273/4� - 323/4� AUPM C4272S5 ( ) C ( )( )( ) 1,035.48� 60� 273/4� - 323/4� AUPM C4860S5 ( ) C ( )( )( ) 959.48� 72� 273/4� - 323/4� AUPM C4872S5 ( ) C ( )( )( ) 1,111.48� 84� 273/4� - 323/4� AUPM C4884S5 ( ) C ( )( )( ) 1,260.
30� D both sides corner worksurface,extended right
48� 60� 273/4� - 323/4� AUPM C4860D5 ( ) C ( )( )( ) 1,036.48� 72� 273/4� - 323/4� AUPM C4872D5 ( ) C ( )( )( ) 1,186.48� 84� 273/4� - 323/4� AUPM C4884D5 ( ) C ( )( )( ) 1,337.
24� D left/30� D right corner worksurface,extended right
42� 60� 273/4� - 323/4� AUPM C4260R5 ( ) C ( )( )( ) 959.42� 72� 273/4� - 323/4� AUPM C4272R5 ( ) C ( )( )( ) 1,111.48� 60� 273/4� - 323/4� AUPM C4860R5 ( ) C ( )( )( ) 1,036.48� 72� 273/4� - 323/4� AUPM C4872R5 ( ) C ( )( )( ) 1,186.48� 84� 273/4� - 323/4� AUPM C4884R5 ( ) C ( )( )( ) 1,337.
Order Code
Example: AUPM C4872S5 AC 118114 114
A CurrentsUP UpstartM PlannableC Table Shape4872 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart corner andextended corner includeworksurface stiffeners that doubleas horizontal cable managers.
Currents
137
Ups
tart
tabl
ede
sks
and
stor
age
Plannable Upstart Tablesextended cornerextended right
description w d h pattern no. lam.
30� D left/24� D right corner worksurface,extended right
42� 60� 273/4� - 323/4� AUPM C4260L5 ( ) C ( )( )( ) $959.42� 72� 273/4� - 323/4� AUPM C4272L5 ( ) C ( )( )( ) 1,111.48� 60� 273/4� - 323/4� AUPM C4860L5 ( ) C ( )( )( ) 1,036.48� 72� 273/4� - 323/4� AUPM C4872L5 ( ) C ( )( )( ) 1,186.48� 84� 273/4�- 323/4� AUPM C4884L5 ( ) C ( )( )( ) 1,337.
Order Code
Example: AUPM C4872S5 AC 118114 114
A CurrentsUP UpstartM PlannableC Table Shape4872 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart corner andextended corner includeworksurface stiffeners that doubleas horizontal cable managers.
Currents
138
Plannable Upstart Tableshalf round and P-shapes
description w d h pattern no. lam.
Half round table desk, four legs 59� 30� 273/4� - 323/4� AUPM D594 ( ) G ( )( )( ) $764.60� 30� 273/4� - 323/4� AUPM D604 ( ) G ( )( )( ) 764.
P-shape surface, extended right 48� 75� 273/4� - 323/4� AUPM P4875S5 ( ) C ( )( )( ) 1,275.
P-shape surface, extended left 75� 48� 273/4� - 323/4� AUPM P7548S5 ( ) C ( )( )( ) 1,275.
Order Code
Example: AUPM P4875S5 AC 118114 114
A CurrentsUP UpstartM PlannableP Table Shape4875 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart half round andP-shape tables include worksurfacestiffeners that double as horizontalcable managers.
Currents
139
Ups
tart
tabl
ede
sks
and
stor
age
Plannable Upstart Tablesstraight leg only
description h pattern no. Paint
Straight leg with glide 265/8� - 315/8� AUPM SGV ( ) $108.
Straight leg with caster 265/8� - 305/8� AUPM SCV ( ) 108.
Order Code
Example: AUPM SC 114
A CurrentsUP UpstartM PlannableS Straight legC Casters114 Leg finish
Specification Information
Specify:
Casters/glidesC CastersG Glides
Leg finishes, paintSee Color Program Page
Plannable Upstart straight legmay not be used with OriginalUpstart tables due to stabilityissues.
Application Notes
Each straight Plannable Upstart legcomes with four (4) metal insertsand four (4) screws.
When creating a freestanding tableusing Upstart legs, Upstart legsmust be attached using metalinserts.
Straight Plannable Upstart legsmust be positioned in accordancewith BIFMA guidelines.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Currents
140
Accessories
type w d h pattern no. list price
Flat bracket 31/2� 14� AB1 F24 $38.
Cable tray 20� 2� 6� AR1 CB 151.
Carpet grips (set of 10) MM2CG 31.
Non skid grips (set of 10) AA1NSK 41.
Lockable caster (set of 4) 2� 2� 21/4� AUPLC4 48.
Lockable caster (set of 5) 2� 2� 21/4� AUPLC5 62.
Order Code
Example: AA1-NSK
A CurrentsA1 AccessoryNSK Non skid grips
Specification Information
Flat bracket and cable tray areblack, painted steel.
Application Notes
Flat bracket attaches returnworksurface to primary worksurfaceat right angle.
Cable tray attaches beneathstiffener under table surface toaccommodate transformers or abundle of cable.
Carpet grips snap into underside ofUpstart leveling glides for tractionon carpeted floors.
Non-skid grips snap intoleveling glides for traction onhard-surface floors.
Locking casters replace standardnon-locking casters.
Currents
141
Ups
tart
tabl
ede
sks
and
stor
age
Upstart Privacy Screensfor Upstart tables
type application w d h pattern no. list price
Polycarbonate screen, back of table 36� 3/4� 24� AUP B3624RC ( ) $535.48� 3/4� 24� AUP B4824RC ( ) 610.60� 3/4� 24� AUP B6024RC ( ) 704.72� 3/4� 24� AUP B7224RC ( ) 769.
Marker surface screen, back of table 36� 3/4� 24� AUP B3624M ( ) 535.48� 3/4� 24� AUP B4824M ( ) 610.60� 3/4� 24� AUP B6024M ( ) 704.72� 3/4� 24� AUP B7224M ( ) 769.
Magnet rail 36� screen 18� 1/4� 2� AUP MR36 ( ) 62.48� screen 30� 1/4� 2� AUP MR48 ( ) 71.60� screen 36� 1/4� 2� AUP MR60 ( ) 78.72� screen 48� 1/4� 2� AUP MR72 ( ) 83.
Order Code
Example: AUP B7224 RC 117
A CurrentsUP UpstartB Back of worksurface72 Width24 HeightRC Polycarbonate117 Paint finish
Specification Information
Specify surface type and paintedfinish for screen frame, bracketsand magnet rail.
Surface type:RC Ribbed polycarbonateM Marker Surface
Application Notes
Upstart screens mount on the backof Upstart tables to provide partialenclosure above and belowworksurface height.
Screens have a translucent, ribbedpolycarbonate or marker surfacecore. Perimeter frame is paintedsteel with trim grey molded cornerblocks.
Screens include brackets that mountto matching holes under Upstarttables of the same width. Bracketholes are also provided for mountingtwo 36� wide screens on a 72� wideUpstart table.
Screen mounts in two positions,creating enclosure to a height of 39�or 48� when the table top is adjustedto 28�.
Screens may be shared betweendesks in back to backconfigurations.
Magnet rails span between screenmounting brackets to hang paperdocuments.
Magnet rails correspond in width toprivacy screens.
Please refer to Introduction page fortable and screen dimensions.
Currents
142
Plannable Upstart Privacy Screensback screens
description type w d h pattern no. 10 15 20 30 40 45
Back of worksurface screens to 42�H 30� 3/4� 15� MZ1-B3015-( ) $313. $353. $362. $396. $445. $495.36� 3/4� 15� MZ1-B3615-( ) 376. 410. 420. 461. 506. 545.42� 3/4� 15� MZ1-B4215-( ) 461. 482. 497. 547. 596. 638.48� 3/4� 15� MZ1-B4815-( ) 518. 539. 555. 608. 682. 728.54� 3/4� 15� MZ1-B5415-( ) 604. 622. 640. 707. 772. 818.60� 3/4� 15� MZ1-B6015-( ) 666. 678. 702. 770. 858. 912.66� 3/4� 15� MZ1-B6615-( ) * 731. * * * *72� 3/4� 15� MZ1-B7215-( ) * 812. * * * *78� 3/4� 15� MZ1-B7815-( ) * 889. * * * *
Back of worksurface screens to overhead supportheight, 46�H
30� 3/4� 19� MZ1-B3019-( ) 397. 434. 445. 488. 536. 583.36� 3/4� 19� MZ1-B3619-( ) 491. 517. 530. 586. 623. 662.42� 3/4� 19� MZ1-B4219-( ) 581. 594. 607. 673. 743. 786.48� 3/4� 19� MZ1-B4819-( ) 660. 676. 692. 762. 881. 898.54� 3/4� 19� MZ1-B5419-( ) 753. 756. 783. 859. 922. 981.60� 3/4� 19� MZ1-B6019-( ) 812. 833. 858. 950. 1,008. 1,075.66� 3/4� 19� MZ1-B6619-( ) * 913. * * * *72� 3/4� 19� MZ1-B7219-( ) * 998. * * * *78� 3/4� 19� MZ1-B7819-( ) * 1,082. * * * *
Back of worksurface screens, to Reuter overheadsupport height, 49�H
30� 3/4� 22� MZ1-B3022-( ) 488. 512. 524. 583. 623. 666.36� 3/4� 22� MZ1-B3622-( ) 603. 622. 640. 704. 755. 783.42� 3/4� 22� MZ1-B4222-( ) 692. 704. 728. 800. 889. 931.48� 3/4� 22� MZ1-B4822-( ) 812. 813. 837. 925. 987. 1,076.54� 3/4� 22� MZ1-B5422-( ) 890. 892. 925. 1,025. 1,089. 1,149.60� 3/4� 22� MZ1-B6022-( ) 950. 994. 1,025. 1,128. 1,195. 1,238.66� 3/4� 22� MZ1-B6622-( ) * 1,104. * * * *72� 3/4� 22� MZ1-B7222-( ) * 1,184. * * * *78� 3/4� 22� MZ1-B7822-( ) * 1,275. * * * *
Order Code
Example: MZ1-B6619-15-W210/20
MZ1 Morrison Networkprivacy screen
B Back of worksurface66 Width19 Height15 Surface type and group
no.W210/20 Upholstery
Specification Information
Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45
Morrison Network screens may beused with Plannable Upstart tables.Refer to front of Upstart price bookfor planning information.
* Screens 66�w and wider areavailable with fabric railroaded to fitthe screens’ width. Please contactKnoll Custom Product Developmentto establish pattern numbers.
Application Notes
Back of worksurface screensprovide visual barrier and tackablesurface from underside ofworksurface to a height of 42�, 46�or 49�.
Screen widths should correspond tostraight worksurface width, or sumof VDT corner and return widths.
Use back of worksurface screen forVDT applications where one side isbacked by a vertical panel.
VDT worksurfaces will accept backscreens on only one back edge.
Back screens may not be used at theend of a straight worksurface; useend screens in this application.
Privacy screens are not available ina combination of fabrics.
Back of worksurface screens are fulldimension: two smaller screens maybe substituted for a larger one. Forexample, if using fabric grades20-70, specify two 36� screens for a72� surface.
Between back-to-back straight orVDT worksurfaces specify asingle3/4� back screen. This allowsback-to-back 235/8�D or 295/8�Dworksurfaces to plan on a precise 6�module.
15� high screens are used for a 42�horizon.
19�H screens are used to fill inspace between worksurface andMorrison overhead.
22�H screens fill the space betweenworksurface and Reuter overhead.
All but shared end screens start atthe bottom of the worksurface.
Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit, andstiffener clip.
For replacement screen stiffenerssee Accessories page.
Privacy screens may be specified toachieve ASTM E-84 Class ‘‘A’’flamespread rating.
Currents
143
Ups
tart
tabl
ede
sks
and
stor
age
Plannable Upstart Privacy ScreensVDT screens
description type w d h pattern no. 10 15 20 30 40 45
Back of VDT screens To 42�H 355/8� 3/4� 15� MZ1-V3615-( ) $376. $410. $420. $445. $495. $545.415/8� 3/4� 15� MZ1-V4215-( ) 461. 482. 497. 536. 583. 638.475/8� 3/4� 15� MZ1-V4815-( ) 518. 539. 555. 596. 662. 728.595/8� 3/4� 15� MZ1-V6015-( ) 657. 682. 704. 754. 832. 901.715/8� 3/4� 15� MZ1-V7215-( ) * 820. * * * *
To 46�H 355/8� 3/4� 19� MZ1-V3619-( ) 496. 514. 530. 564. 605. 662.415/8� 3/4� 19� MZ1-V4219-( ) 581. 594. 607. 649. 728. 786.475/8� 3/4� 19� MZ1-V4819-( ) 660. 678. 702. 747. 813. 898.595/8� 3/4� 19� MZ1-V6019-( ) 829. 856. 888. 961. 1,065. 1,153.715/8� 3/4� 19� MZ1-V7219-( ) * 1,034. * * * *
To 49�H 355/8� 3/4� 22� MZ1-V3622-( ) 603. 622. 640. 684. 728. 783.415/8� 3/4� 22� MZ1-V4222-( ) 692. 704. 728. 762. 870. 931.475/8� 3/4� 22� MZ1-V4822-( ) 812. 815. 839. 892. 898. 1,076.595/8� 3/4� 22� MZ1-V6022-( ) 960. 997. 1,028. 1,119. 1,233. 1,338.715/8� 3/4� 22� MZ1-V7222-( ) * 1,195. * * * *
Order Code
Example: MZ1-V4822-15-W210/20
MZ1 Morrison Networkprivacy screen
V VDT48 Width22 Height15 Surface type and group
no.W210/20 Upholstery
Specification Information
Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45
VDT worksurfaces will not acceptback screens on both back edges.Use VDT screens on at least oneback edge.
VDT screens are not in pairs;specify one for each back edge orone VDT screen and one backscreen.
* Screens 66�w and wider areavailable with fabric railroaded to fitthe screens’ width. Please contactKnoll Custom Product Developmentto establish pattern numbers.
Application Notes
Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit andstiffener clip.
15� high screens are used for a 42�horizon.
19�H screens are used to fill inspace between worksurface anddesk mounted Morrison Networkoverheads.
22�H screens fill the space betweenworksurface and desk mountedReuter overheads.
Privacy screens may be specified toachieve ASTM E-84 Class ‘‘A’’flamespread rating.
* Morrison Network screens may beused with Plannable Upstart tables.Refer to front of Upstart price bookfor planning information.
Currents
144
Wall Mounting Suggestions The following information is provided only as a guide, and represents minimum recommendations only. Knoll does not accept responsibility for the attachment of any Knoll product to a Customer’s site wall. Wall specification/construction is the responsibility of the Customer and its structural engineer/architect. Failure to properly attach Knoll products to adequate wall structures can lead to property damage and/or personal injury.
You should consult your own structural engineers and/or architects and must not rely on the information provided herein.
It is the responsibility of the Customer and its structural engineers/architects to verify that the permanent structural walls (studs, blocks, solid masonry, etc.) on which the Knoll products are intended to be mounted are designed appropriately to support the product weight, PLUS 3 lbs. per linear inch for each useable shelf length
NOTE: A cabinet’s top is considered a “useable shelf” and MUST be included in the calculation of the total load for an overhead cabinet.
It is the responsibility of the Customer and its structural engineer/architects to specify the fasteners and method for attaching the Knoll supplied wall mounting cleat, bracket, frame, etc. to the supporting wall and to confirm that the installers have adhered to these specifications. For all local building standards and codes, and additional requirements (including, but not limited to, seismic conditions) the Customer should always consult local code agencies.
Wall Mounting of Knoll Products Currents
145
NEW CONSTRUCTION
Cinder Block or Poured Concrete Masonry Wall
Wood Stud Wall, the studs being FULL HEIGHT to the roof/floor above
Wood Stud Wall, the studs being only Ceiling Height
Steel Stud Wall, the studs being FULL HEIGHT to the roof/floor above
Steel Stud Wall, the studs being only Ceiling Height
Stud Specification
Wood studs, grade #2 or better, 3 1/2" minimum width, OR Metal studs, minimum 25 gage thickness, 3 5/8" minimum width
The wall must be a minimum of 6" thick, and must be full height to the roof/floor structure above
Wood studs must be Grade #2, or better, 3 1/2" minimum width
Wood studs must be Grade #2, or better, 3 1/2" minimum width
Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width
Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width
Stud Centers
Metal and wood studs must be spaced at 16" c/c maximum
N/A Wood studs must be spaced at 16" c/c maximum
Wood studs must be spaced at 16"" c/c maximum"
Metal studs must be spaced at 16" c/c maximum
Metal studs must be spaced at 16" c/c maximum
Stud Height
Metal and wood studs must extend upwards, and be securely attached to the roof/floor structure above
Wood studs must be braced above the ceiling, and be securely attached to the roof/floor structure above
Affix #2 grade 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof/floor structure above
Metal studs must be braced above the ceiling, and be securely attached to the roof/floor structure above
Affix metal bracing 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof / floor structure above
Mounting the Knoll Supplied Cleat, Bracket, Frame, etc*
Insert a 2" X 6" wood block, #2 grade or better, [or a DanbackTM flexible wood backing system] horizontally between each of the studs to accommodate the full width of the cabinet, and beyond to the next stud.
Fasten the wood block to each stud using three screws at the ends of each block. (Fasten the Danback™ as directed by the manufacturer)
Fasten the Knoll supplied wall mounting cleat, bracket, frame, etc directly to each wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
Fasten the Knoll supplied cabinet wall mounting cleat, bracket, frame, etc. directly to the masonry wall every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wall every 6", and fasten the lower horizontal element to the wall every 16"
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
*Graham Wall Hung Shelf
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
Fasten the Knoll supplied wall mounting brackets directly to the masonry wall, using the holes provided in each bracket
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
Fasten the Knoll supplied wall cleat with...
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
3/16" x 3 1/2" Tapcon Masonry Screws or equiv. @ 6" c/c with
1-1/4" embedment, screwed directly into the masonry wall
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
EXISTING CONSTRUCTION
Wall Mounting of Knoll Products Currents
146
pattern no. page
A1 R1 SI 106, 107
A1 RTOPL 106, 107
A1 RTOPR 106, 107
A2 R48 LL 106
A2 R48 LP 106
A2 R48 RL 106
A2 R48 RP 106
A2 R64 LP 106
A2 R64 RP 106
A2L 48 LL 107
A2L 48 LP 107
A2L 48 RL 107
A2L 48 RP 107
A2L 64 LP 107
A2L 64 RP 107
AA139E 61
AA148E 61
AA164E 61
AA1B 61
AA1CET39 40
AA1CET48 40
AA1CET64 40
AA1CG 33
AA1DHPS36(5) 48
AA1DHPS42(5) 48
AA1DHPS50(5) 48
AA1DHPS57(5) 48
AA1DHPS64(5) 48
AA1DHTC 48
AA1EPS40 42
AA1EPS48 42
AA1EPS53 42
AA1EPS60 42
AA1EPS65 42
AA1FCET39 47
AA1FCET48 47
AA1FCET64 47
AA1FDB27 33
AA1FDB28 33
AA1FMET30 47
AA1FMET39 47
AA1FMET42 47
AA1FMET48 47
AA1FMET56 47
AA1FMET64 47
AA1FMPS30 46
AA1FMPS39 46
AA1FMPS42 46
AA1FMPS48 46
AA1FMPS56 46
AA1FMPS64 46
AA1FUPS39 46
AA1LO24DN 112
AA1LO30DN 112
AA1LO36DN 112
AA1LO42DN 112
AA1LO48DN 112
AA1MET30 40
AA1MET39 40
AA1MET42 40
AA1MET48 40
pattern no. page
AA1MET56 40
AA1MET64 40
AA1MET74 40
AA1MET80 40
AA1MPS30 40
AA1MPS39 40
AA1MPS42 40
AA1MPS48 40
AA1MPS56 40
AA1MPS64 40
AA1MPS74 40
AA1MPS80 40
AA1MRS 40
AA1NSK 33, 61, 141
AA1OR 27
AA1ORD 27
AA1RE 61
AA1RODN 112
AA1ROUP 112
AA1ROXUP 112
AA1RPS34 43
AA1RPS42 43
AA1RPS49 43
AA1RPS64 43
AA1RPS79 43
AA1RSDN 112
AA1RSUP 112
AA1RSXDN 112
AA1RSXDN 112
AA1RSXUP 112
AA1RTC 43
AA1T06 61
AA1T18 61
AA1T24 61
AA1T30 61
AA1T36 61
AA1T42 61
AA1T48 61
AA1T60 61
AA1UA39 45
AA1UA48 45
AA1UA64 45
AA1UPS39 45
AA1UPS48 45
AA1UPS64 45
AA2 MTC 40, 46
AA2 UTC 45, 46
AA2T5E19 123
AA2T5E25 123
AA2T5E37 123
AB1 AC24 99
AB1 CL24L 100
AB1 CL24R 100
AB1 CL30L 100
AB1 CL30R 100
AB1 CLF24L 100
AB1 CLF24R 100
AB1 CLF30L 100
AB1 CLF30R 100
AB1 CS 114
AB1 F24 141
pattern no. page
AB1 FE 99
AB1 I25(G/C) 100
AB1 I27A(G/C) 100
AB1 I27F(G/C) 100
AB1 VL 100
AB1-ABC24 99
AB1FAE 33, 99
AB2 AE 99
AB2 FE27 99
AB2 FE28 99
AC1 39E1 63
AC1 39L2 63
AC1 39T3 63
AC1 39V2 64
AC1 39X4 63
AC1 39Y3 64
AC1 48E1 63
AC1 48L2 63
AC1 48T3 63
AC1 48V2 64
AC1 48X4 63
AC1 48Y3 64
AC1 64E1 63
AC1 64L2 63
AC1 64T3 63
AC1 64V2 64
AC1 64X4 63
AC1 64Y3 64
ACE1BD6648D(L/R) 93
ACE1BD6648S(L/R) 93
ACE1BD7248D(L/R) 93
ACE1BD7248S(L/R) 93
ACE1BD7848D(L/R) 93
ACE1BD7848S(L/R) 93
ACE1BD8448D(L/R) 93
ACE1BD8448S(L/R) 93
ACE1CR24L 96
ACE1CR24N 96
ACE1CR24R 96
ACE1H4818 96
ACE1H4818P 96
ACE1H6024 96
ACE1H6024P 96
ACE1L3636SSN 92
ACE1L4242DSN 92
ACE1L4242SDN 92
ACE1L4242SSN 92
ACE1L4260SSN 94
ACE1L4266SSN 94
ACE1L4272SSN 94
ACE1L4278SSN 94
ACE1L4848DDN 92
ACE1L4848DSN 92
ACE1L4848SDN 92
ACE1L4848SSN 92
ACE1L4860DSN 94
ACE1L4860SDN 94
ACE1L4860SSN 94
ACE1L4866DSN 94
ACE1L4866SDN 94
ACE1L4866SSN 94
pattern no. page
ACE1L4872DSN 94
ACE1L4872SDN 94
ACE1L4872SSN 94
ACE1L4878SSN 94
ACE1L4884SSN 94
ACE1L6042SSN 94
ACE1L6048DSN 95
ACE1L6048SDN 95
ACE1L6048SSN 94
ACE1L6642SSN 95
ACE1L6648DSN 95
ACE1L6648SDN 95
ACE1L6648SSN 95
ACE1L7242SSN 95
ACE1L7248DSN 95
ACE1L7248SDN 95
ACE1L7248SSN 95
ACE1L7842SSN 95
ACE1L7848SSN 95
ACE1L8448SSN 95
ACE1R1212G 96
ACE1R2424N 91
ACE1R2430N 91
ACE1R3024N 91
ACE1R3030N 91
ACE1R3624N 91
ACE1R3630N 91
ACE1R4224N 91
ACE1R4230N 91
ACE1R4824N 91
ACE1R4830N 91
ACE1R5424N 91
ACE1R5430N 91
ACE1R6024N 91
ACE1R6030N 91
ACE1R6624N 91
ACE1R6630N 91
ACE1R7224N 91
ACE1R7230N 91
ACE1R7824N 91
ACE1R7830N 91
ACE1R8424N 91
ACE1R8430N 91
ACE1R9024N 91
ACE1R9030N 91
ACE1R9624N 91
ACE1R9630N 91
ACE1W362430N 97
ACE1W363024N 97
ACE1W422430N 97
ACE1W423024N 97
ACE1W482430N 97
ACE1W483024N 97
ACE1W722430N 97
ACE1W723024N 97
AD C35 SF 116
AD C35 SH 120
AD C36 SF 116
AD C36 SH 120
AD C4242 DF 117
AD C4242 LF 117
Alpha-Numeric Index
147
pattern no. page
AD C4242 LH 121
AD C4242 RF 117
AD C4242 RH 121
AD C4242 SF 117
AD C4242 SH 121
AD C44 DF 117
AD C44 DH 121
AD C44 LF 117
AD C44 LH 121
AD C44 RF 117
AD C44 RH 121
AD C44 SF 117
AD C44 SH 121
AD C45 DF 116
AD C45 DH 120
AD C45 RF 116
AD C45 RH 120
AD C45 SF 116
AD C45 SH 120
AD C46 DF 116
AD C46 DH 120
AD C46 RF 116
AD C46 RH 120
AD C46 SF 116
AD C46 SH 120
AD C47 DF 116
AD C47 DH 120
AD C47 RF 116
AD C47 RH 120
AD C47 SF 116
AD C47 SH 120
AD C53 SF 115
AD C53 SH 119
AD C54 DF 115
AD C54 DH 119
AD C54 LF 115
AD C54 LH 119
AD C54 SF 115
AD C54 SH 119
AD C55 DF 117
AD C55 DH 121
AD C55 LF 117
AD C55 LH 121
AD C55 RF 117
AD C55 RH 121
AD C55 SF 117
AD C55 SH 121
AD C63 SF 115
AD C63 SH 119
AD C64 DF 115
AD C64 DH 119
AD C64 LF 115
AD C64 LH 119
AD C64 SF 115
AD C64 SH 119
AD C74 DF 115
AD C74 DH 119
AD C74 LF 115
AD C74 LH 119
AD C74 SF 115
AD C74 SH 119
AD S36 DF 118
AD S36 DH 122
AD S36 SF 118
AD S36 SH 122
pattern no. page
AD S42 DF 118
AD S42 DH 122
AD S42 SF 118
AD S42 SH 122
AD S48 DF 118
AD S48 DH 122
AD S48 SF 118
AD S48 SH 122
AD S60 DF 118
AD S60 DH 122
AD S60 SF 118
AD S60 SH 122
AD S72 DF 118
AD S72 DH 122
AD S72 SF 118
AD S72 SH 122
AD S84 SF 118
AD S84 SH 122
AF 4848 AM 65
AF 4860 AM 65
AF 6448 AM 65
AF 6460 AM 65
AFWB 62
AMB CP12-AMP 56
AMB CP24 LUC 56
AMC B10 56
AMC FP2 (L or N) 56
AMC FP3 (L or N) 56
AMC O3 56
AMC O5E 56
AMC O6 56
AMC OF500 56
AMC OF625 56
AMC PDC 5E4N 56
AMC5 CP12 56
AMC5 OC20(A or B) 56
AMC5 OC30(A or B) 56
AMC5 OC40(A or B) 56
AMC5 OC50(A or B) 56
AP1 3918 N 58
AP1 3924 57
AP1 3924 N 58
AP1 3930 N 58
AP1 3936 57
AP1 3936 N 58
AP1 3942 N 58
AP1 3948 57
AP1 3948 N 58
AP1 3960 N 58
AP1 4818 57
AP1 4818 N 58
AP1 4824 57
AP1 4824 N 58
AP1 4824M 59, 60
AP1 4830 57
AP1 4830 N 58
AP1 4830M 59, 60
AP1 4836 57
AP1 4836 N 58
AP1 4836M 59, 60
AP1 4842 57
AP1 4842 N 58
AP1 4842M 59, 60
AP1 4848 57
AP1 4848 N 58
pattern no. page
AP1 4848M 59, 60
AP1 4860 N 58
AP1 6418 57
AP1 6418 A 58
AP1 6424 57
AP1 6424 A 58
AP1 6424M 59, 60
AP1 6430 57
AP1 6430 A 58
AP1 6430M 59, 60
AP1 6436 57
AP1 6436 A 58
AP1 6436M 59, 60
AP1 6442 57
AP1 6442 A 58
AP1 6442M 59, 60
AP1 6448 57
AP1 6448 A 58
AP1 6448M 59, 60
AP1 6460 A 58
AP1 LF 61
APA 39 32
APA 48 32
APA 64 32
APC 0912 A 24
APC 0912 C 20
APC 0912 CX 20
APC 0912 F 23
APC 0912 P 21
APC 0912 PT 21
APC 0912 S 20
APC 0924 A 24
APC 0924 C 20
APC 0924 F 23
APC 0924 M 21
APC 0924 P 21
APC 0924 PT 21
APC 0924 S 20
APC 0936 A 24
APC 0936 C 20
APC 0936 F 23
APC 0936 M 21
APC 0936 P 21
APC 0936 PT 21
APC 0936 S 20
APC 0948 A 24
APC 0948 C 20
APC 0948 F 23
APC 0948 M 21
APC 0948 P 21
APC 0948 PT 21
APC 0948 S 20
APC 0960 A 24
APC 0960 C 20
APC 0960 F 23
APC 0960 M 21
APC 0960 P 21
APC 0960 PT 21
APC 0960 S 20
APC 0972 A 24
APC 0972 C 20
APC 0972 F 23
APC 0972 M 21
APC 0972 P 21
APC 0972 PT 21
pattern no. page
APC 0972 S 20
APC 1636 A 24
APC 1636 F 23
APC 1648 A 24
APC 1648 F 23
APC 1648 M 21
APC 1648 P 22
APC 1648 PT 22
APC 1660 A 24
APC 1660 F 23
APC 1660 M 21
APC 1660 P 22
APC 1660 PT 22
APC 1672 A 24
APC 1672 F 23
APC 1672 M 21
APC 1672 P 22
APC 1672 PT 22
APC 1836 A 24
APC 1848 A 24
APC 1860 A 24
APC 1872 A 24
APC 2736 A 25
APC 2748 A 25
APC 2760 A 25
APC 2772 A 25
APC AZ48 17
APC AZ48 F 18
APC AZ60 17
APC AZ60 F 18
APC AZ72 17
APC AZ72 F 18
APC HOC 19
APC OC 19
APC OCF 19
APF 1848 15
APF 1860 15
APF 1872 15
APF1 3948 14
APF1 3960 14
APF1 3972 14
APF1 4848 14
APF1 4860 14
APF1 4872 14
APF1 6448 14
APF1 6460 14
APF1 6472 14
APFA1 3948 14
APFA1 3960 14
APFA1 3972 14
APFA1 4848 14
APFA1 4860 14
APFA1 4872 14
APFA1 6448 14
APFA1 6460 14
APFA1 6472 14
APR 48 16
APR 480 16
APR 60 16
APR 600 16
APR 72 16
APR 720 16
APT 28, 42
APT 48 16
APT 60 16
Currents
148
pattern no. page
APT 72 16
APT C24 16
APT C36 16
APT C48 16
APT C60 16
APT C72 16
APT1 C24 16
APT1 C36 16
APT1 C48 16
APT1 C60 16
APT1 C72 16
APTA 48 16
APTA 60 16
APTA 72 16
APTA CC 28
APTA CC1 28
APX CIP4 55
APX CIP6 55
APX CIP8 55
AR OF 19, 56
AR1 CB 141
AR1 DA 49, 52
AR1 DAC 49, 52
AR1 DB 49, 52
AR1 DBC 49, 52
AR1 DC 52
AR1 DCC 52
AR1 DX 49, 52
AR1 DXC 49, 52
AR1 DY 49, 52
AR1 DYC 49, 52
AR1 DZ 52
AR1 DZC 52
AR1 E2 51
AR1 E3 51
AR1 EJ1 50
AR1 EJ10 50
AR1 EJ12 50
AR1 EJ2 50
AR1 EJ3 50
AR1 EJ4 50
AR1 EJ5 50
AR1 EJ6 50
AR1 EJ8 50
AR1 EOM 49
AR1 EPC1 51
AR1 EPC2 51
AR1 EPH1 50
AR1 EPH2 50
AR1 EPHF 33
AR1 EPI2 50
AR1 EPI5 50
AR1 EPIC 50
AR1 ET1 50
AR1 ET3 50
AR1 ET5 50
AR1 ET8 50
AR1 HCC H10 55
AR1 HOB 19
AR1 HOB2 19
AR1 PCC 100 55
AR1 RCM 10 55
AR1 T2 53
AR1 T3 53
AR1 TJ1 53
pattern no. page
AR1 TJ10 53
AR1 TJ12 53
AR1 TJ2 53
AR1 TJ3 53
AR1 TJ4 53
AR1 TJ5 53
AR1 TJ6 53
AR1 TJ8 53
AR1 TOM 52
AR1 TPC1 53
AR1 TPC2 53
AR1 TPH1 53
AR1 TPH2 53
AR1 TPHF 33
AR1 TPI2 53
AR1 TPI5 53
AR1 TPIC 53
AR1 TT1 53
AR1 TT3 53
AR1 TT5 53
AR1 TT8 53
AR1-ELS-B 49, 52
AR1VCM 33
AR1VCM5 33
AR1VCM6 33
ARE1 DA 54
ARE1 DB 54
ARE1 DC 54
ARE1 DX 54
ARE1 DX (O or T) 54
ARE1 DY 54
ARE1 DY (O or T) 54
ARE1 DZ 54
ARE1 DZ (O or T) 54
ARE1 EP1 54
ARE1 ET1 54
ARE1 ET3 54
ARE1 ET5 54
ARE1 TP1 54
ARE1 TT1 54
ARE1 TT3 54
ARE1 TT5 54
AS1 BKH 103
AS1 BKL 103
AS1 DDF M 101
AS1 DDFO 101
AS1 DFF G 102
AS1 DFF M 101
AS1 DPAD 104, 105
AS1 DPDF M 101
AS1 DPDFG 102
AS1 SDF M 101
AS1 SDFO 101
AS1 SFF G 102
AS1 SFF M 101
AS1 SPAD 104, 105
AS1 SPDF M 101
AS1 SPDFG 102
AS1DD30G 102
AS1DD36G 102
AS1DF30G 102
AS1DF36G 102
AS1FF30G 102
AS1FF36G 102
AS1PDF30G 102
pattern no. page
AS1PDF36G 102
AS2 PT(C) 103
AS2 PT(N) 103
AT1 D50A 126
AT1 D50F 126
AT1 D62A 126
AT1 D62F 126
AT1 E24LA 125
AT1 E24LF 125
AT1 E24RA 125
AT1 E24RF 125
AT1 P36A 124
AT1 P36F 124
AT1 R42A 126
AT1 R42F 126
AT1 R48A 126
AT1 R48F 126
AT1 TA 124
AT1 TL 124
AT1 W24A 124
AT1 W24F 124
AT1 W30A 125
AT1 W30F 125
AT1 W50A 126
AT1 W50F 126
AU 1224 A 66
AU 1236 A 66
AU 1248 A 66
AU 1260 A 66
AU 2124 A 66
AU 2136 A 66
AU 2148 A 66
AU 2160 A 66
AU 2824 A 66
AU 2836 A 66
AU 2848 A 66
AU 2860 A 66
AU1 CL12 69
AU1 CL21 69
AU1 CL28 69
AU1 CS 69
AU1 CT12 69
AU1 CT21 69
AU1 CT28 69
AU1 PC12 74
AU1 PC21 74
AU1 PC28 74
AU1 X112 69
AU1 X121 69
AU1 X128 69
AU1 X312 69
AU1 X321 69
AU1 X328 69
AUA1 0824 G 67
AUA1 0836 G 67
AUA1 0848 G 67
AUA1 0860 G 67
AUA1 0872 G 67
AUA1 1224 G 67
AUA1 1236 G 67
AUA1 1248 G 67
AUA1 1260 G 67
AUA1 1272 G 67
AUA1 1524 G 67
AUA1 1536 G 67
pattern no. page
AUA1 1548 G 67
AUA1 1560 G 67
AUA1 1572 G 67
AUA1224 68
AUA1236 68
AUA1248 68
AUA1260 68
AUA1272 68
AUA2124 68
AUA2136 68
AUA2148 68
AUA2160 68
AUA2172 68
AUA2824 68
AUA2836 68
AUA2848 68
AUA2860 68
AUA2872 68
AUP B3624M 142
AUP B3624RC 142
AUP B4824M 142
AUP B4824RC 142
AUP B6024M 142
AUP B6024RC 142
AUP B7224M 142
AUP B7224RC 142
AUP C4872S5 128
AUP C7248S5 128
AUP D624 130
AUP M72DC4 127
AUP M72DF4 127
AUP MR36 142
AUP MR48 142
AUP MR60 142
AUP MR72 142
AUP O664 130
AUP R424 130
AUP S48D4 129
AUP S48S2 129
AUP S48S4 129
AUP S60D4 129
AUP S72D4 129
AUP S72E4 129
AUP T363 130
AUP V48S5 128
AUP W60D4 130
AUP Y72DCL4 127
AUP Y72DCR4 127
AUP Y72DFL4 127
AUP Y72DFR4 127
AUPCCV 131
AUPCGV 131
AUPLC4 141
AUPLC5 141
AUPM C3660S5 137
AUPM C3672S5 137
AUPM C4242D5 134
AUPM C4242S5 134
AUPM C4260L5 138
AUPM C4260R5 137
AUPM C4260S5 137
AUPM C4272L5 138
AUPM C4272R5 137
AUPM C4272S5 137
AUPM C4848D5 134
Currents
149
pattern no. page
AUPM C4848S5 134
AUPM C4860D5 137
AUPM C4860L5 138
AUPM C4860R5 137
AUPM C4860S5 137
AUPM C4872D5 137
AUPM C4872L5 138
AUPM C4872R5 137
AUPM C4872S5 137
AUPM C4884D5 137
AUPM C4884L5 138
AUPM C4884R5 137
AUPM C4884S5 137
AUPM C6036S5 135
AUPM C6042L5 135
AUPM C6042R5 136
AUPM C6042S5 135
AUPM C6048D5 135
AUPM C6048L5 135
AUPM C6048R5 136
AUPM C6048S5 135
AUPM C6060D5 134
AUPM C6060S5 134
AUPM C7236S5 135
AUPM C7242L5 135
AUPM C7242R5 136
AUPM C7242S5 135
AUPM C7248D5 135
AUPM C7248L5 135
AUPM C7248R5 136
AUPM C7248S5 135
AUPM C8448D5 135
AUPM C8448L5 135
AUPM C8448R5 136
AUPM C8448S5 135
AUPM D594 139
AUPM D604 139
AUPM P4875S5 139
AUPM P7548S5 139
AUPM S30D4 132
AUPM S30S4 132
AUPM S36D4 132
AUPM S36S2 133
AUPM S36S4 132
AUPM S42D4 132
AUPM S42S2 133
AUPM S42S4 132
AUPM S48D4 132
AUPM S48S2 133
AUPM S48S4 132
AUPM S54D4 132
AUPM S54S4 132
AUPM S60D4 132
AUPM S60S2 133
AUPM S60S4 132
AUPM S66D4 132
AUPM S66S4 132
AUPM S72D4 132
AUPM S72S4 132
AUPM S84D4 132
AUPM S84S4 132
AUPM SCV 140
AUPM SGV 140
AW1 A60L 84
AW1 A60R 84
pattern no. page
AW1 A72L 84
AW1 A72R 84
AW1 C3660 S 82
AW1 C3672 S 82
AW1 C3684 S 82
AW1 C4242 D 80
AW1 C4242 L 80
AW1 C4242 R 80
AW1 C4242 S 80
AW1 C4260 L 82
AW1 C4260 R 82
AW1 C4260 S 82
AW1 C4272 L 82
AW1 C4272 R 82
AW1 C4272 S 82
AW1 C4284 L 82
AW1 C4284 R 82
AW1 C4284 S 82
AW1 C4848 D 80
AW1 C4848 L 80
AW1 C4848 R 80
AW1 C4848 S 80
AW1 C4860 D 82
AW1 C4860 L 82
AW1 C4860 R 82
AW1 C4860 S 82
AW1 C4872 D 82
AW1 C4872 L 82
AW1 C4872 R 82
AW1 C4872 S 82
AW1 C4884 D 82
AW1 C4884 L 82
AW1 C4884 R 82
AW1 C4884 S 82
AW1 C6036 S 81
AW1 C6042 L 81
AW1 C6042 R 81
AW1 C6042 S 81
AW1 C6048 D 81
AW1 C6048 L 81
AW1 C6048 R 81
AW1 C6048 S 81
AW1 C6060 D 80
AW1 C6060 L 80
AW1 C6060 R 80
AW1 C6060 S 80
AW1 C7236 S 81
AW1 C7242 L 81
AW1 C7242 R 81
AW1 C7242 S 81
AW1 C7248 D 81
AW1 C7248 L 81
AW1 C7248 R 81
AW1 C7248 S 81
AW1 C8436 S 81
AW1 C8442 L 81
AW1 C8442 R 81
AW1 C8442 S 81
AW1 C8448 D 81
AW1 C8448 L 81
AW1 C8448 R 81
AW1 C8448 S 81
AW1 CS3612 114
AW1 CS4812 114
AW1 CS6012 114
pattern no. page
AW1 CS7212 114
AW1 F2424 79
AW1 F3024 79
AW1 F3624 79
AW1 F3630 79
AW1 F4224 79
AW1 F4824 79
AW1 F4830 79
AW1 F6024 79
AW1 F6030 79
AW1 F6624 79
AW1 F7224 79
AW1 F7230 79
AW1 F8424 79
AW1 F8430 79
AW1 P4875 S 83
AW1 P4887 S 83
AW1 P7548 S 83
AW1 P8748 S 83
AW1 R7236 84
AW1 S2424 79
AW1 S3024 79
AW1 S3624 79
AW1 S3630 79
AW1 S4224 79
AW1 S4824 79
AW1 S4830 79
AW1 S6024 79
AW1 S6030 79
AW1 S6624 79
AW1 S7224 79
AW1 S7230 79
AW1 S8424 79
AW1 S8430 79
AWM1 S36 90
AWM1 S42 90
AWM1 S48 90
AWM1 S60 90
AWM1 S66 90
AWM1 S72 90
AWM1 S78 90
AWM1 S84 90
AWM2 C3660 S 87
AWM2 C3672 S 87
AWM2 C4242 D 88
AWM2 C4242 L 88
AWM2 C4242 R 88
AWM2 C4242 S 88
AWM2 C4260 L 87
AWM2 C4260 R 87
AWM2 C4260 S 87
AWM2 C4272 L 87
AWM2 C4272 R 87
AWM2 C4272 S 87
AWM2 C4848 D 88
AWM2 C4848 L 88
AWM2 C4848 R 88
AWM2 C4848 S 88
AWM2 C4860 D 87
AWM2 C4860 L 87
AWM2 C4860 R 87
AWM2 C4860 S 87
AWM2 C4872 D 87
AWM2 C4872 L 87
AWM2 C4872 R 87
pattern no. page
AWM2 C4872 S 87
AWM2 C4884 D 87
AWM2 C4884 L 87
AWM2 C4884 R 87
AWM2 C4884 S 87
AWM2 C6036 S 86
AWM2 C6042 L 86
AWM2 C6042 R 86
AWM2 C6042 S 86
AWM2 C6048 D 86
AWM2 C6048 L 86
AWM2 C6048 R 86
AWM2 C6048 S 86
AWM2 C6060 D 88
AWM2 C6060 L 88
AWM2 C6060 R 88
AWM2 C6060 S 88
AWM2 C7236 S 86
AWM2 C7242 L 86
AWM2 C7242 R 86
AWM2 C7242 S 86
AWM2 C7248 D 86
AWM2 C7248 L 86
AWM2 C7248 R 86
AWM2 C7248 S 86
AWM2 C8448 D 86
AWM2 C8448 L 86
AWM2 C8448 R 86
AWM2 C8448 S 86
AWM2 F2424 85
AWM2 F3024 85
AWM2 F3030 85
AWM2 F3624 85
AWM2 F3630 85
AWM2 F4224 85
AWM2 F4230 85
AWM2 F4824 85
AWM2 F4830 85
AWM2 F5424 85
AWM2 F5430 85
AWM2 F6024 85
AWM2 F6030 85
AWM2 F6624 85
AWM2 F6630 85
AWM2 F7224 85
AWM2 F7230 85
AWM2 F7824 85
AWM2 F7830 85
AWM2 F8424 85
AWM2 F8430 85
AWM2 F9024 85
AWM2 F9030 85
AWM2 F9624 85
AWM2 F9630 85
AWM2 P4875 S 89
AWM2 P4887 S 89
AWM2 P7548 S 89
AWM2 P8748 S 89
AWMSAMP1616 98
AX1 AK1 31
AX1 AK3 31
AX1 E40 42
AX1 E48 42
AX1 E53 42
AX1 E60 42
Currents
150
pattern no. page
AX1 E65 42
AX1 EET39(T,R,L) 42
AX1 EET48(T,R,L) 42
AX1 EET64(T,R,L) 42
AX1 EGF11 42
AX1 EGF16 42
AX1 EGF24 42
AX1 EGF4 42
AX1 F18 30
AX1 F39 28
AX1 F48 28
AX1 F64 28
AX1 FF 15
AX1 FHLS4818 31
AX1 FWS 39 31
AX1 FWS 48 31
AX1 FWS 64 31
AX1 HLS4839 27
AX1 HLS6439 27
AX1 HLS6448 27
AX1 L18 29
AX1 L39 26
AX1 L48 26
AX1 L64 26
AX1 M3939 41
AX1 M4239 41
AX1 M4839 41
AX1 M4848 41
AX1 M5639 41
AX1 M5648 41
AX1 M6439 41
AX1 M6448 41
AX1 M6464 41
AX1 M8039 41
AX1 M8048 41
AX1 M8064 41
AX1 R34239 43
AX1 R34939 43
AX1 R34948 43
AX1 R36439 43
AX1 R36448 43
AX1 R36464 43
AX1 R37939 43
AX1 R37948 43
AX1 R37964 43
AX1 S 27
AX1 SWS39 27
AX1 SWS48 27
AX1 SWS64 27
AX1 T18 29
AX1 T39 26
AX1 T48 26
AX1 T64 26
AX1 V18 29
AX1 V39 26
AX1 V48 26
AX1 V64 26
AX1 X18 29
AX1 X39 26
AX1 X48 26
AX1 X64 26
AX1 Y18 29
AX1 Y39 26
AX1 Y48 26
AX1 Y64 26
pattern no. page
AX1A F18H 30
AX1A F18L 30
AX1DHES3600L(5) 39
AX1DHES3600R(5) 39
AX1DHES3603L(5) 39
AX1DHES3603R(5) 39
AX1DHES4200L(5) 39
AX1DHES4200R(5) 39
AX1DHES4203L(5) 39
AX1DHES4203R(5) 39
AX1DHES5000L(5) 39
AX1DHES5000R(5) 39
AX1DHES5003L(5) 39
AX1DHES5003R(5) 39
AX1DHES5700L(5) 39
AX1DHES5700R(5) 39
AX1DHES5703L(5) 39
AX1DHES5703R(5) 39
AX1DHES6400L(5) 39
AX1DHES6400R(5) 39
AX1DHES6403L(5) 39
AX1DHES6403R(5) 39
AX1LEG 15
AX1LEG5 15
AX1LEG6 15
AX1LES E 38
AX1LES30 38
AX1LES39 38
AX1LES48 38
AX1LES64 38
AX1MES30 38
AX1MES39 38
AX1MES42 38
AX1MES48 38
AX1MES56 38
AX1MES64 38
AX1MES80 38
AX1SEC3939 34
AX1SEC4039 L 34
AX1SEC4239 35
AX1SEC4339 C 34
AX1SEC4839 35
AX1SEC4848 34
AX1SEC4948 L 34
AX1SEC5248 C 34
AX1SEC5639 35
AX1SEC5648 35
AX1SEC6439 35
AX1SEC6448 35
AX1SEC6464 34
AX1SEC6564 L 34
AX1SEC6864 C 34
AX1SEC8048 35
AX1SEC8064 35
AX1SECBT 34, 35, 36
AX1SED3939 36
AX1SED4239 36
AX1SED4339C 36
AX1SED4848 36
AX1SED5039 36
AX1SED5048 36
AX1SED5248C 36
AX1SED5739 36
AX1SED5748 36
AX1SED6439 36
pattern no. page
AX1SED6448 36
AX1SED6464 36
AX1SED7848 36
AX1SED7864 36
AX1SX39 A (L/C/P) 37
AX1SX39 C (L/C/P) 37
AX1SX48 A (L/C/P) 37
AX1SX48 C (L/C/P) 37
AX1SX64 A (L/C/P) 37
AX1SX64 C (L/C/P) 37
AX2 C3939 41
AX2 C4839 41
AX2 C4848 41
AX2 C6439 41
AX2 C6448 41
AX2 C6464 41
AY1 1224C 70
AY1 1224C A 72
AY1 1236C 70
AY1 1236C A 72
AY1 1248C 70
AY1 1248C A 72
AY1 1260C 70
AY1 1260C A 72
AY1 1618M 70
AY1 1618M A 72
AY1 1618S 71
AY1 1618S A 73
AY1 1624M 70
AY1 1624M A 72
AY1 1624S 71
AY1 1624S A 73
AY1 1630M 70
AY1 1630M A 72
AY1 1630S 71
AY1 1630S A 73
AY1 1636M 70
AY1 1636M A 72
AY1 1636S 71
AY1 1636S A 73
AY1 1642M 70
AY1 1642M A 72
AY1 1642S 71
AY1 1642S A 73
AY1 1648M 70
AY1 1648M A 72
AY1 1648S 71
AY1 1648S A 73
AY1 1660M 70
AY1 1660M A 72
AY1 1660S 71
AY1 1660S A 73
AY1 2124C 70
AY1 2124C A 72
AY1 2136C 70
AY1 2136C A 72
AY1 2148C 70
AY1 2148C A 72
AY1 2160C 70
AY1 2160C A 72
AY1 2518M 70
AY1 2518M A 72
AY1 2524M 70
AY1 2524M A 72
AY1 2530M 70
pattern no. page
AY1 2530M A 72
AY1 2536M 70
AY1 2536M A 72
AY1 2542M 70
AY1 2542M A 72
AY1 2548M 70
AY1 2548M A 72
AY1 2560M 70
AY1 2560M A 72
AY1 2824C 70
AY1 2836C 70
AY1 2848C 70
AY1 2860C 70
AY1 AXST16 78
AY1 AXT16 78
AY1 AXT25 78
AY1 AXT32 78
AY1 CE 75
AY1 CL12 77
AY1 CL21 77
AY1 CL28 77
AY1 CMK 77
AY1 CS 75
AY1 CT12 77
AY1 CT21 77
AY1 CT28 77
AY1 CX12 78
AY1 CX21 78
AY1 CX28 78
AY1 HLA 77
AY1 LL16 75
AY1 LL25 75
AY1 LL32 75
AY1 LP16 76
AY1 LP25 76
AY1 LP32 76
AY1 LT16 75
AY1 LT25 75
AY1 LT32 75
AY1 LX16 76
AY1 LX25 76
AY1 LX32 76
AY1 MMK 77
AY1 PC16 74
AY1 PC25 74
AY1 PC32 74
AY1 SCL16 77
AY1 SCT16 77
AY1 SCX16 78
AY1 SL16 75
AY1 SMK 77
AY1 SP16 76
AY1 SPC16 74
AY1 ST16 75
AY1 SX116 78
AY1 SX16 76
AY1 SX316 78
AY1 X112 78
AY1 X121 78
AY1 X128 78
AY1 X312 78
AY1 X321 78
AY1 X328 78
CSAMP1616 98
MC1-39S1 63
Currents
151
pattern no. page
MC1-48S1 63
MC1-64S1 63
MD6-BD 103
MD6-FS 103
ML4L17 113
ML4L31 113
ML4L44 113
ML4L58 113
MM2-CG 61
MM2CG 141
MR3 PDCX 56
MZ1-B3015 143
MZ1-B3019 143
MZ1-B3022 143
MZ1-B3615 143
MZ1-B3619 143
MZ1-B3622 143
MZ1-B4215 143
MZ1-B4219 143
MZ1-B4222 143
MZ1-B4815 143
MZ1-B4819 143
MZ1-B4822 143
MZ1-B5415 143
MZ1-B5419 143
MZ1-B5422 143
MZ1-B6015 143
MZ1-B6019 143
MZ1-B6022 143
MZ1-B6615 143
MZ1-B6619 143
MZ1-B6622 143
MZ1-B7215 143
MZ1-B7219 143
MZ1-B7222 143
MZ1-B7815 143
MZ1-B7819 143
MZ1-B7822 143
MZ1-V3615 144
MZ1-V3619 144
MZ1-V3622 144
MZ1-V4215 144
MZ1-V4219 144
MZ1-V4222 144
MZ1-V4815 144
MZ1-V4819 144
MZ1-V4822 144
MZ1-V6015 144
MZ1-V6019 144
MZ1-V6022 144
MZ1-V7215 144
MZ1-V7219 144
MZ1-V7222 144
R3B0P0F4207 44
R3B0P0F4907 44
R3B0P0F6407 44
R3B0P0F7907 44
R3B0P0H4207 44
R3B0P0H4907 44
R3B0P0H6407 44
R3B0P0H7907 44
R3B0T0F4207 44
R3B0T0F4907 44
R3B0T0F6407 44
R3B0T0F7907 44
pattern no. page
R3B0T0H4207 44
R3B0T0H4907 44
R3B0T0H6407 44
R3B0T0H7907 44
RO1-GB 111
RO1-HP12 109, 110
RO1-HP15 109, 110
RO1-HP6 109, 110
RO1-HP9 109, 110
RO1-PULL 111
RO3-N24 108
RO3-N30 108
RO3-N36 108
RO3-N42 108
RO3-N48 108
RO3-N60 108
RO3-N66 108
RO3-N72 108
RO3-OM30 109
RO3-OM36 109
RO3-OM42 109
RO3-OM48 109
RO3-OM60 109
RO3-OM72 109
RO3-ON30 109
RO3-ON36 109
RO3-ON42 109
RO3-ON48 109
RO3-ON60 109
RO3-ON72 109
RO3-RD30 109
RO3-RD36 109
RO3-RD42 109
RO3-RD48 109
RO3-RD60 109
RO3-RD72 109
RO3-VP 109
RS1 MPB 112
RS1-M24 110
RS1-M30 110
RS1-M36 110
RS1-M42 110
RS1-M48 110
RS1-M60 110
RS1-N24 110
RS1-N30 110
RS1-N36 110
RS1-N42 110
RS1-N48 110
RS1-N60 110
RS1-VP 110
RTAT5E19S 113
RTAT5E25A 113
RTAT5E25S 113
RTAT5E37A 113
RTAT5E37S 113
RTAT5E49A 113
RTAT5E49S 113
RTAT5E61A 113
RTAT5E61S 113
USAMP1616 98
Currents
152
This Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terms & Conditions
of SalesSales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made onlyon the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale isexpressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio andKnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller.These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotationsexpire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have enteredinto the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted inaccordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they wereoriginated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after orderentry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no othercharges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is generally issued upon shipment.In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deductedand the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder due withinthirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and chargesfor inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at timeof order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to theoutstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees andcosts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changes andCancellation
Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expensesincurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs,may not be canceled.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc. andwithin Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing is tested forrigorous motion and transportation but is not guaranteed to protect furniture from all conditions. If special packaging is required for any reason, please consultwith your sales representative or dealer. Seller shall select the method of shipment and routing. Freight for all KnollTextiles orders is prepaid and added to theinvoice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any special servicesin excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra,export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery tocarrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, orshould be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shallconstitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for anyother claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaserfor such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportationrelated claims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but notlimited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service.All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currentlyoffered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the originalSeller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests adelay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order isready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparationfor storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to thePurchaser upon delivery of the Product into storage.
Selling Policy
153January 15, 2018
Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material toSeller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements ofUnderwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of theprocedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance,condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for anydamages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials,during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Sellershall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of WarrantyLifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted,Series 2 Storage, Template and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2 VeneerFront Storage, uphostery, textiles and leathers, special or custom products, see below)12 Years: Chadwick, Essentials Work Chairs, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, ReGeneration by Knoll, Remix, and Tobogganseating (except seating upholstery, textiles, leathers and finishes, see below).10 Years: Anchor Storage except digital keypad lock, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon SatelliteSurfaces, Reff Profiles, Rockwell Unscripted, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, Wood Casegoods (TheGraham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra Sapper Monitor ArmCollection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric board textiles, cork andFilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structural components, Tone bases.5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts and plywood, Currents handcrank, KnollStudio, Rockwell Unscripted wire bases, Spark Series seating structural elements, structural elements of allKnollStudio outdoor products including all Richard Schultz designed products, KnollExtra CPU holders and all universal storage drawers and Power Collection,k. stand bases.3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles andSmokador Collection leathers, KnollExtra Pop Up Screens.2 Years: Anchor Storage digital keypad lock, all other KnollExtra product1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces. KnollStudio, outdoorproduct finishes, k. lounge upholstery and k. lounge fabric. Rockwell Unscripted fabric and accessories.This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable
warranties).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of thecolors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, withrespect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, actof any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonablecontrol. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Productor cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser,and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or acontributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made allpayments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit orproceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACHOF THIS AGREEMENT.Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into betweenthe parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.
Selling Policy
154January 15, 2018
KnollKey Lock Program
KnollKeyLock ProgramGeneral InformationFollowing is the KnollKey lock policy, applicable to all products.
Knoll furniture can be ordered keyed-alike or random keyed. Key-alikeand random keying instructions cannot be mixed on any single order. Onlyone of the two instructions can be used on an individual order. When anorder is submitted with mixed (key-alike and random) instructions, Knollwill release the order as key-alike only and lock cores will have to bespecified separately.
Key-alikeFor the convenience of the user, furniture may be keyed alike at nocharge. Write ‘‘Key-alike’’ in the description of your purchase order forany pedestal, overhead, file or other item you wish to have keyed alike.
Using the key-alike instructions, order cores and keys as line items onyour purchase order. Do NOT submit a key-alike form. The Knoll EastGreenville Lock Center will select key numbers from the standard range ofK 001 - K 250. Key numbers will not be repeated unless over 250 sets areordered. Lock cores keyed-alike will ship separately from the product,ready for field installation.
There is no charge for key-alike orders if placed with the furniture order.
IF THE KEY-ALIKE ORDER IS NOT PLACED AT LEAST TWO WEEKSPRIOR TO THE FURNITURE SHIP DATE, A $50 HANDLING CHARGEAND AIR FREIGHT CHARGES WILL APPLY.
If product is ordered and shipped random-keyed, additional lock coresfor key-alike are billable.
Random-KeyingTo specify product keyed-random, write ‘‘key-random’’ in the productdescription. Random-keyed product is shipped with the lock core factoryinstalled. A shrouded key is included. Random means no effort has beenmade to match key numbers, or to make them different.
KeysA Knoll shrouded key is shipped with every lock core. 250 Key numbersare available. For numbers above 250, contact Custom ProductDevelopment. Additional keys and key blanks are available. See serviceparts for more information.
Master KeyingKnoll locks can be controlled by means of a master key. There is noadditional per-lock charge for master keying. A letter of approval from theclient must accompany orders for master keys.
Installing Lock CoresLock cores can be installed or removed in the field by using a change key.Cores must be in the unlocked position to be removed. See service partsfor change key pattern number and pricing.
Lock DistributionAll orders for key-alike lock cores/keys are packaged and shipped fromthe East Greenville Lock Center, regardless of where the pedestals,overhead, or other units are produced. Random keyed product will havecores factory-installed.
How to SpecifyKey-AlikeFollowing is an example of how to specify key-alike for a cluster of 10workstations.
Step 1 - Using the project floorplan, count the number of locks in eachworkstation.
Step 2 - Count the number of workstations with the same quantity oflocks. Group together the workstations with a like number of locks.
5 workstations with 2 locks per station3 workstations with 4 locks per station2 workstations with 5 locks per station
Step 3 - For the first group (5 sets of 2 locks), enter the number ofworkstations in the quantity column.
Qty Pattern # Description Unit List Ext. List
5
Step 4 - Then enter the pattern number ‘‘KSPEC_ _’’ and add a suffix for thenumber of locks for that group (i.e., for 2 locks per station, add the suffix‘‘2’’). Up to 30 lock cores are available in a set (i.e., KSPEC 30).
Qty Pattern # Description Unit List Ext. List
5 KSPEC 2 Set of 2 cores/keys N / C N / C
Step 5 - Repeat for other groups.
Qty Pattern # Description Unit List Ext. List
5 KSPEC 2 Set of 2 cores/keys N / C N / C
3 KSPEC 4 Set of 4 cores/keys N / C N / C
2 KSPEC 5 Set of 5 cores/keys N / C N / C
Your Key instructions are complete.
Knoll will select key numbers for each set from 250 available numbers.Additional key numbers are available through Custom Product Development.For additions to existing installations, specify desired key numbers inthe description.
Service PartsPattern # Description List Price
KKEY_ _ _ Shrouded KeySpecify key number desired
$10
KBLANK Shrouded Key Blank $10
KSPECB_ _ _ Retrofit Universal Core/KeySpecify key number desired
$22
KCHANGE Change Key $10
HLKRKMASTER* Master Key $10
*Note: A letter of approval on company letterhead from the client mustaccompany all orders for master keys.
155
General Ordering Information
The ProductsThis guide encompasses all standard products for this product group.
SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius
PricingAll prices shown are list.
How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.
Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.
On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.
To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.
Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry
Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.
Sustainability Statement
Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.
For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’
156