www.uvled.krwww.uvsmt.com

UVSMT Co.,Ltd256-1. Dodangdong Wonmigu, Bucheon Si, Kyunggido, 420-130. Korea大韩民国京畿道富川市远美区陶唐洞256-1（2F)

Tel / +82-32-675-3077, +82-32-203-3077Fax / +82-32-682-6544E-mail / help@uvsmt.comWebsite / www.uvled.krwww.uvsmt.com

Please do not see the UV light in direct.It may cause serious burns to skin and eyes.Please use UV sun glass to avoid UV LightUV光是肉眼看不到的强紫外线，工作时请务必戴好防护眼镜

All technical Specification and design in this catalogue will be changed without notice本资料的记载供参考，根据作业环境及产品的不同会有所变化。 UV

-LED

Cur

ing

Syst

em W

e hav

e a su

cces

s to s

olve

the c

urre

nt U

V Cu

ring

prob

lems

No.1 Company in UV field globally 面向世界打造一流的企业！

Spot Type UVLED Curing System – SUV S SeriesCost performance that will overwhelm a lamp systemMore than 9000mW/cm2 UV intensity

比传统的灯管式固化机高好几倍的光强

可以达到9,000mW/cm2以上

▹UV Intensity of Each Lenz : 各镜头UV照射强度

▹ Zero Heat Shrinkage : 不会产生热变形

▹ 4 individually controllable Heads : 独立控制4个照射头

▹ 4 different Lens to choose form : 任意选择4种2次镜头

▹ Small Size : 小型化，减少空间 ▹ Environment friendly : 环保

ww

w.u

vsm

t.co

mU

V-LED C

URIN

G SY

STEM

Ø3 - 9,999 mW/cm2

(Max Measured value of USHIO instrument : USHIO 测试仪 最大测试值）Ø6 - 2,500 mW/cm2

Ø8 - 1,000 mW/cm2

Ø10 - 800 mW/cm2

※ Testing Instrument : USHIO, UIT-250※ Tested UV LED Curing : SUV-S Series (room temperature 25℃)※ 使用测试仪 : USHIO, UIT-250※ 测试设备 : SUV-S Series (常温 : 25℃)

UV-LED almost does not generate the thermal, so the thermal transferred to products will be +10~35°on room temperature.Transformation due to thermal, the biggest problem of existing ‘Arc Type UV Lamp’, can be prevented completely by UV LED Type.

4-Head Independent controlYou can produce different items by controlling each head independently. Also the out-put of UV will not be lowered when using the 4-Heads at the same time thanks to our advanced out-put control system.

各镜头单独控制一台控制器可同时或独立操作4个LED照射头，可分别设定各照射头的UV照射强度，方便进行不同产品的同时固化。即使照射头数量增加也不会影响UV照射强度。

By choosing the different Lens in accordance with the product characteristics, you can apply the emitting width and optimize the curing process.

根据产品的特性来任意选择镜头，可以调整照射头光斑，扩充固化领域。

You can reduce the necessary space to the minimum thanks to it’s small size, compared to‘UV Curing of Lamp type’.

小型化的设计跟灯管式汞灯相比大大减少了生产车间 的使用空间。

When using the‘UV LED’, the pollutant, such as 03 will not be generated at all, and electric consumption will be reduced to 1/10. So it contributes to preventing the global warming.

UVLED点亮时，不会发生O3等有害气体，这会减少二氧化碳所形成的温室效应。而且消耗功率跟灯管式相比才1/10左右，所以大大节省设备所需的电费。

在UVLED固化机消耗功率小，放出的热量也很少。又 经 过 散 热 处 理， 所 以 达 到 产 品 的 热 量 在 常 温 下+10~35°度左右。尤其是对热敏感度高的塑料或胶片的固化工艺上，有效地解决了热变形的问题。

The kinds of Lens : 2次镜头的种类

[Emitting length and width : 照射长度及照射幅度]

Linear Type UVLED Curing System – SUV L Series"GURANTEED HIGH QUALITY OF CURING!!"高品质的UV固化!!

ww

w.u

vsm

t.co

mU

V-LED C

URIN

G SY

STEM

▹Uniform and stable intensity : 均匀稳定的照射强度

With controlling the current setting to LED, it emits the high strength UV and the quantity of emitted light is uniform, so the curing quality is very even.The intensity variation per time is within -10% at maximum, so it minimiezs the curing defect from low quantity of light.※ Testing Instrument : USHIO, UIT-250※ Tested UV LED Curing : SUV-S Series

线光源固化机通过可变电流，可以输出最大的照射强度。均匀(Uniform)的照射强度可以有效地控制产品的质量。可将随时间变化的UV照射强度的变化率控制在10%以内，降低了因为UV照射强度降低而发生的不良。※ 使用测试仪：USHIO, UIT-250※ 测试设备：SUV-LA165016A (常温:25℃)

▹ Programmable irradiation function : 程序照射功能

▹Absolute UV Power : 优越的UV光出量

• With setting the irradiation power and time to channel for each proper curing condition, User can proceed the work in accordance with characteristics of each using resin and process.

• It is equipped with function from continual curing of constant power to repetitive interval curing.

• 按照使用的UV树脂及产品的特性来任意操作照射强度和时间，更好的完成高品质的固化。

• 可以设定从简单照射（连续照射）到反复照射（每隔一段时间照射）

Lamp's life will be shorter if the heat is not properly dissipated when emitting light. For that reason, it is considered necessary to avoid rises in temperature during illumination. The advance that has fulfilled this requirement in a compact head is UVSMT 's unique heat dissipation technology. So It will be more than 90% stable for the UV uniformity.

当LED点亮时Chip温度会升高，导致UV光出量会减少。UVSMT的特殊散热设计，大大降低温度，让UV光出量达到90%以上。

UV uniformity According to the emmiting Time. : 随着点亮时间变化的UV保持率.

<电流值>

Multi-functions Controller

UVLED Curing System – Other Products

ww

w.u

vsm

t.co

mU

V-LED C

URIN

G SY

STEM

•Face Type UVLED Curing System•wavelength(波长) : 385, 395, 405nm•Intensity(照射强度) : 3,200mW/cm2

•Cooling(冷却方式) : Water(水冷式)

•concentrate light type(2列集光)•wavelength(波长) : 365, 385, 395, 405nm•Intensity(照射强度) : 2,500mW/cm2

•Cooling(冷却方式) : Air(空冷式), Water(水冷式)

•UVLED Curing System for Printer•wavelength(波长) : 395, 405nm•Intensity(照射强度) : 6,000mW/cm2

•Working Aear : 23mm x 80mm•Cooling(冷却方式) : Fan(空冷式)

•Pen Type UVLED Curing System•wavelength(波长) : 365, 385nm•Intensity(照射强度) : 4,000W/cm2

•adapter(电源适配器充电式)•L : 192mm D : Ø15

※ UVSMT Can manufacture any size of Linear and Face type curing system.

※ Linear Type和Face Type UVLED 固化机，按照客户的需求可以定做。

•Easy operation with 2.8inch LED display•Multi-access link•Programmable illumination

▹ Simple setting method with 2.8 inch TFT LCD : 简单易懂的2.8inch液晶显示屏

▹ Support for multi interface of other equipment 支持多种外部访问控制

Even first time user can set and use easily othurgh simple display and user-friendly UI.※ Working mode : Display for work process, intensity and time for irradiation.※ Setting mode : Setting for intensity and time and system.

易于辨认的显示，简单易懂的UI，如同家电般的感觉，操作简单。※ Working mode : 操作情况用图表，照射强度，照射时间来显示※ Setting mode : 可以设定照射强度，照射时间和系统

We adopted the RS-232C or I/O port for controlling irradiation intensity and time, On/Off as well.

照射强度和On/Off,照射时间，可以用外部I/O端子，还可以利用RS-232C端子来控制。

You can control each Head with the Parallel signal, throughout other equipment such as PLC(Programmable Logical Controller)

可编程控制器PLC (Programmable Logical Controller )等外部设备发送并行(Parallel)信号，来控制LED照射头。

You can monitor the curernt states of curing process, or remote control UV out-put or system setting.

在PC上连接启动专用软件后，可以设定UV光强和工作状态等。

Product No. SUV-SMM SUV-SMH SUV-SMU

UV Intensity 6000mW/cm² 8000mW/cm² 9999mW/cm²

Lens (Ø) 3 6 8 10 3 6 8 10 3 6 8 10

Intensity for each Lens (㎽/㎠) 6000 1500 845 540 8000 2000 1125 720 9999 2500 1400 900

Wavelength Select of 365, 385, 400nm

Power consumption Max. 40W (When 4ch are working simultaneously)

Cooling Natural Cooling (No Fan)

Weight 0.85Kg

Product No. SUV-SMM SUV-SMH SUV-SMUUV照射强度 6000mW/cm² 8000mW/cm² 9999mW/cm²

透镜(Ø) 3 6 8 10 3 6 8 10 3 6 8 10各种透镜照射强度 (mW/cm2) 6000 1500 845 540 8000 2000 1125 720 9999 2500 1400 900

波长 任意选择365,385,395,405nm消耗功率 Max.40W（4Ch同时点亮时）散热方式 自然冷却方式

控制器重量 0.85Kg

Product No. SUV-LA0050216A SUV-LA0120516A SUV-LA0160516A SUV-LA0180516A SUV-LW0240516A SUV-LW0520516A

UV Intensity (㎽/cm²@365㎚) 1300mW/cm² 1300mW/cm² 1300mW/cm² 1300mW/cm² 1500mW/cm² 1500mW/cm²

Wavelength Select of 365, 385, 395, 405nm

Life time 20,000 Hours (Use On/Off, Possible to use 120,000hours)

LED Beam size (L x W) 2mm x 50mm 5mm x 120mm 5mm x 160mm 5mm x 180mm 5mm x 240mm 5mm x 520mm

Max, Tem room temperature ±10 ~ 15℃ (△t 10℃ ~ 15℃)

Power consumption 50W 110W 150W 170W

Cooling Fan Fan Fan Fan Water Water

Head Weight 0.23Kg 0.76Kg 0.95Kg 1.1Kg

Controller Weight 0.85Kg 1.8Kg 1.8Kg 1.8Kg

Controller size (L x W x H - ㎜) 95 x 210 x 125 95 x 210 x 190 95 x 210 x 190 95 x 210 x 190 120 x 240 x 190 350 x 380 x 160

Head size (L x W x H - ㎜) 95 x 58 x 30 138 x 102 x 45.3 178 x 102 x 45.3 194 x 102 x 45.3

Product No. SUV-LA0050216A SUV-LA0120516A SUV-LA0160516A SUV-LA0180516A SUV-LW0240516A SUV-LW0520516AUV照射强度 (mW/cm²@365nm) 1300mW/cm² 1300mW/cm² 1300mW/cm² 1300mW/cm² 1500mW/cm² 1500mW/cm²

波长 任意选择365,385,395,405nmLED寿命 连续照射时20,000小时（ON/Off使用时 100,000小时左右)

照射尺寸（宽x长） 2mm x 50mm 5mm x 120mm 5mm x 160mm 5mm x 180mm 5mm x 240mm 5mm x 520mm最高温度 △t 10℃ ~ 15℃消耗功率 50W 110W 150W 170W冷却方式 空冷(Fan) 空冷(Fan) 空冷(Fan) 空冷(Fan) 水冷(Water) 水冷(Water)

照射头重量 0.23Kg 0.76Kg 0.95Kg 1.1Kg控制器重量 0.85Kg 1.8Kg 1.8Kg 1.8Kg

控制器尺寸 (L x W x H - ㎜) 95 x 210 x 125 95 x 210 x 190 95 x 210 x 190 95 x 210 x 190 120 x 240 x 190 350 x 380 x 160照射头尺寸(L x W x H - ㎜) 95 x 58 x 30 138 x 102 x 45.3 178 x 102 x 45.3 194 x 102 x 45.3

Product No. UV LED Spot T ype - USC140 UV LED Linear Type - ULC140

Available head SUV-SM, SUV-SH, SUV-SU SUV-LA125016, SUV-LA165016, SUV-LA185016

LCD Display 2.8inch TFT LCD, 320 x 240 pixel, 6bit color

Control ModeWhole or individual On/Off button for controlling the headUp/Down button when inputting the figure in setting mode.◀ / ▶ butotn when moving the item in setting mode

Set Timer 0 ∼ 999sec Setting (1 sec interval)

UV Intensity Setting 1∼ 100% (1% interval)

Key Switch Switch the Work Mode and Setting Mode

Foot Switch Emit On/ Off Control by foot (Option)

Input interface USB Connecter, RS232Connecter, I/O Connecter

External Output Emit On/Off Signal, Emission Alarm

Cooling Air Cooling Fan or Water

AC AdaptorAC Input : 100-240V ~ 50~60 Hz / 1.7ADC Output : DC 12V / 3.3A

AC Input : 100-240V ~ 50~60 Hz / 3.6ADC Output : DC 30V / 8A

Power consumption Max. 40W (When 4ch are working simultaneously) Max. 170W (Based on SUV-LA185016)

Ambient temperature/temperature range Controller : 5°C ∼ 35°C / Max. 85%（no condensation)

Conservationtemperature/temperature range Controller: -10°C ∼ 65°C / Max. 85%（no condensation)

Additional Function Monitoring Program for controlling the irradiation working, Updating the internal program

Size 95㎜ x 210㎜ x 125㎜ (L x W x H) 95㎜ x 210㎜ x 190㎜ (L x W x H)

Weight 0.85Kg 1.8Kg

Product No. UV LED Spot T ype (点光源) - USC140 UV LED Linear Type (线光源) - ULC140

使用的照射头 SUV-SM, SUV-SH, SUV-SU SUV-LA125016, SUV-LA165016, SUV-LA185016LCD 画面 2.8inch TFT LCD, 320 x 240 pixel, 6bit color

控制键照射头控制(全部/单独)键 - On/Off 键设定数值键 - Up/Down项目移动键 ◀ / ▶ 键

设定时间 0∼9999秒内设定（单位为每秒）UV照射强度设定 1∼100%范围内设定（1%单位）

操作锁 工作键（Work）与设定键（Setting）转换

脚踏开关 UV LED On/Off 脚踏开关-根据客户的需求单独销售

外部输入 USB接口，RS232C端子，I/O端子（外部输入端子）外部输出 照射On/Off信号，设定信号

冷却方式 空冷(Fan) 空冷(Fan)

AC电源适配器 额定输入 : 100-240V 50∼60 Hz / 1.7A额定输出 : DC 12V / 3.3A

额定输入 : 100-240V 50∼60 Hz / 3.6A额定输出 : DC 30V / 8A

消耗功率 Max 40W（4Ch同时点亮时） Max170W(产品SUV-LA185016为准）周围温度/温度范围 控制器 : 5°C ∼ 35°C / Max. 85%（无结冰)周围温度/温度范围 控制器 : -10°C ∼ 65°C / Max. 85%（无结冰)

附加功能 软件可更新（支持更多软件功能）尺寸 95㎜ x 210㎜ x 125㎜ (L x W x H) 95㎜ x 210㎜ x 190㎜ (L x W x H)重量 0.85Kg 1.8Kg

Spot Type UV LED Curing System(SUV-S Series) Line Up Spot Type UV LED Curing System(SUV-S Series) Line Up

Linear Type UV LED Curing System(SUV-L Series) Line Up Linear Type UV LED Curing System(SUV-L Series) Line Up

UV LED Controller Specification UV LED Controller Specification

Testing Instrument : Ushio UIT-250 測定器 : Ushio UIT-250

Testing Instrument : Ushio UIT-250 測定器 : Ushio UIT-250

ww

w.u

vsm

t.co

mU

V-LED C

URIN

G SY

STEM

SPECIFICATI0N

SPECIFICATI0N

1KW高压汞灯

[KW高压汞灯] [KW高压汞灯]

[KW高压汞灯][KW高压汞灯]

▹Dimension (Unit : mm) ▹UV Spectrum of each wavelength (UV紫外线各波段光谱图)

▹UV Intensity profile (照射强度分布图) SUV-S6H365 Spot Curing System (Mesured by UIT-250)SUV-S6H365 Spot固化机为准（UIT-250测试）

ww

w.u

vsm

t.co

mU

V-LED C

URIN

G SY

STEM

SPECIFICATI0N