1
Stunning New Possibilities in Bass Recording and Performance When Roland introduced the original V-Bass System, serious bass players worldwide took notice. Now, we are proud to introduce the VB-99 V-Bass, which delivers three times the sonic firepower of the original model! Based on an all-new custom processing engine and 10 years of research and development, the VB-99 serves up a wide range of inspiring new COSM ® bass and amplifier models, powerful polyphonic effects, new string modeling technology, dual independent signal paths for blending sounds, and new controllers. It also features a host of thoughtful improvements that bassists demanded, such as bass–to-MIDI converters, streaming audio via USB, and much more. Most advanced bass processor ever Dozens of COSM ® instrument models, including coveted vintage and modern basses, amps, synth basses, effects and even electric guitars Converts bass to MIDI and streams audio via USB Dual independent stereo signal paths can be layered or switched: allows two different virtual sounds at the same time Allows users to play polyphonic synth bass sounds without tracking issues Table top configuration, rack mountable, or stand mountable Stereo XLR, stereo 1/4”, MIDI, SP/DIF and USB outputs Advanced new realtime controllers: D-Beam, ribbon and V-Link 21 VB-99 V-Bass System VB-99 Specifications AD Conversion 24 bits + AF method DA Conversion 24 bits Sampling Frequency 44.1 kHz Program Memories 400: 200 (User) + 200 (Preset) Nominal Input Level BASS INPUT: -10 dBu Input Impedance BASS INPUT: 2.2 M Ω Nominal Output Level MAIN OUT: -10 dBu, SUB OUT (XLR): +4 dBu, BASS OUT: -10 dBu Output Impedance MAIN OUT: 1 k Ω, SUB OUT (XLR): 600 Ω Dynamic Range 100 dB or greater (IHF-A) Controls Top Panel: OUTPUT LEVEL knob, Function knobs x 6 (F1–F6), BALANCE knob, V-BASS LEVEL knob, V-LINK button, DIRECT PATCH, buttons x 5 (1–5), CONTROL buttons x 2 (1, 2), COSM BASS buttons x 2 (A, B), BASS DIRECT button, POLY FX A/B buttons x 2 (A, B), FX buttons x 2 (A, B), COSM AMP buttons x 2 (A, B), MIXER buttons x 2 (A, B), DELAY/REVERB button, DYNAMIC button, CHAIN button, CONTROL ASSIGN button, NAME/KEY/BPM button, Function buttons x 6 (F1–F6), EXIT button, WRITE button, PAGE buttons x 2 (Left, Right), BASS TO MIDI button, SYSTEM button, GLOBAL button, TUNER button, CATEGORY button, PATCH/VALUE dial, Power switch, D BEAM (D Beam Controller, PITCH button, FILTER button, ASSIGNABLE button) RIBBON CONTROLLER Ribbon Controller, PITCH button, FILTER button, ASSIGNABLE button, Rear Pane: Ground Lift switch (SUB OUT) Display 240x64 dots graphic LCD (with backlit) Connectors Top Panel: GK IN connector (13-pin DIN type), Rear Panel: BASS INPUT jack (1/4” phone type), BASS OUTPUT jack (1/4” phone type), SUB OUT jacks x 2 (L, R) (XLR type), MAIN OUT jacks x 2 (L/MONO, R) (1/4” phone type), PHONES jack (Stereo 1/4” phone type), DIGITAL OUT jack (Coaxial type, conforms to IEC60958-3), EXP PEDAL jack (1/4” TRS phone type), CTL 3,4 jack (1/4” TRS phone type), USB connector (B type), RRC2 IN connector (RJ45 type), MIDI connectors x 2 (IN, OUT) (5-pin DIN type), DC IN jack Power Supply AC Adaptor (PSB-1U) Current Draw 1.3 A Dimensions 384.0 (W) x 218.0 (D) x 93.5 (H) mm, 15-1/8 (W) x 8-5/8 (D) x 3-11/16 (H) inches * EIA-5U rack mount type: optional rack mount adaptor RAD-99 Weight 2.1 kg / 4 lbs 11 oz (excluding AC Adaptor) Accessories Owner’s Manual, GK cable (5 m), USB cable, RRC2 cable, VB-99 Software CD-ROM, AC adaptor (PSB-1U), Knob Bolt x 4 Options Divided Pickup: GK-3B, MIDI Foot Controller: FC-300, Footswitch: BOSS FS-5U, Dual Footswitch: BOSS FS-6, Expression Pedal: EV-5, BOSS FV-500L/500H, GK Cable: GKC-10/5/3, Unit Selector: US-20, Rack Mount Adaptor: RAD-99, Pad Stand: PDS-10, Footswitch Cable: PCS-31, Carrying Bag: CB-VG9 * 0 dBu= 0.775 Vrms * The specifications are subject to change without notice. VB-99 with Stand PDS-10 and Foot Controller FC-300 CB-VG9 Carrying Bag for VB-99 and FC-300 For bassists using Roland’s VB-99 and FC-300, the CB-VG9 is an ideal match for convenience, great fit and protection against common travel-related accidents. The CB-VG9 can also house a VB-99/PDS- 10 combination. Rear Panel Front Panel

CUBE-80X Guitar Amplifier VB-99 V-Bass Systemcms.rolandus.com/assets/media/pdf/vb_99_brochure.pdfCUBE-80X Guitar Amplifier VB-99 V-Bass System 四角で囲んではいけない規定あり

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: CUBE-80X Guitar Amplifier VB-99 V-Bass Systemcms.rolandus.com/assets/media/pdf/vb_99_brochure.pdfCUBE-80X Guitar Amplifier VB-99 V-Bass System 四角で囲んではいけない規定あり

Stunning New Possibilities in Bass Recording and PerformanceWhen Roland introduced the original V-Bass System, serious bass players worldwide took notice. Now, we are proud to introduce the VB-99 V-Bass, which delivers three times the sonic firepower of the original model! Based on an all-new custom processing engine and 10 years of research and development, the VB-99 serves up a wide range of inspiring new COSM® bass and amplifier models, powerful polyphonic effects, new string modeling technology, dual independent signal paths for blending sounds, and new controllers. It also features a host of thoughtful improvements that bassists demanded, such as bass–to-MIDI converters, streaming audio via USB, and much more.

●Most advanced bass processor ever●Dozens of COSM® instrument models, including coveted vintage and modern basses, amps, synth basses, effects and even electric guitars●Converts bass to MIDI and streams audio via USB●Dual independent stereo signal paths can be layered or switched: allows two different virtual sounds at the same time●Allows users to play polyphonic synth bass sounds without tracking issues●Table top configuration, rack mountable, or stand mountable●Stereo XLR, stereo 1/4”, MIDI, SP/DIF and USB outputs●Advanced new realtime controllers: D-Beam, ribbon and V-Link

20 21

CUBE-80X Guitar Amplifier VB-99 V-Bass System

四角で囲んではいけない規定あり

The All-New Power CUBEIntroducing the most powerful guitar amplifier in the CUBE Series lineup: the new CUBE-80X. Expanding on the top-selling CUBE-60, the CUBE-80X delivers a massive 80 watts of power through a 12” speaker, and features a switchable clean and lead channel design derived from its predecessor. Other features include a Looper, a unique new SOLO function with memory for recalling preset amp tones or serving as a third channel. simultaneous reverb and delay with tap tempo, a built in automatic tuner, an aux input for connecting MP-3 players CD players, or other audio and more.

●Powerful 80-watt output into a high performance 12” speaker ●10 COSM® amp models including new DLX Combo model●Two channels: Clean and Lead plus new SOLO memory function●New Spring Reverb modeling for vintage reverb sounds●Easy to use Looper for unique live performance●Convenient built in chromatic tuner●Aux input for connecting MP-3 players or other audio sources

CUBE-80X Specifications■Rated Power Output 80 W ■Nominal Input Level INPUT: -10 dBu/1 M Ω, AUX IN: -10 dBu ■Speaker 30 cm (12 inches) ■Controls POWER Switch, SELECT Switch, TUNER Switch, <JC CLEAN CH> BRIGHT Switch, VOLUME Knob, <LEAD CH> TYPE Switch (ACOUSTIC SIM, BLACK PANEL, DLX COMBO, BRIT COMBO, TWEED, CLASSIC STACK, METAL STACK, R-FIER STACK, DYNA AMP), GAIN Knob, VOLUME Knob, SOLO Switch, VOLUME(SOLO) Knob, <EQUALIZER> BASS Knob, MIDDLE Knob, TREBLE Knob, <PRESENCE> PRESENCE Knob, <EFX> EFX Knob (CHORUS, FLANGER, PHASER, TREMOLO), <DELAY/LOOPER> TAP/REC/PLAY/DUB Switch, DELAY/LOOPER Knob, (WARM,CLEAR,LOOPER), <REVERB> REVERB Knob (SPRING, PLATE), FOOT SWITCH TYPE Switch (FS-5L/FS-5U) ■Indicators JC CLEAN Channel, LEAD Channel, SOLO, TUNER, EFX, DELAY/LOOPER, TAP/REC/PLAY/DUB, REVERB ■Connectors INPUT Jack (1/4” phone type), AUX IN Jack (Stereo miniature phone type), LINE OUT Jack (1/4” phone type), RECORDING OUT/PHONES Jack (Stereo 1/4” phone type), EXT SPEAKER (1/4” phone type), FOOT SW Jack (CH SELECT, SOLO) (1/4” TRS phone type), FOOT SW Jack (EFX, REVERB) (1/4” TRS phone type), FOOT SW Jack (TAP/REC/PLAY/DUB, DELAY/LOOPER) (1/4” TRS phone type) ■Power Supply AC117V, AC220V, AC230V, AC240V (50/60 Hz) ■Power Consumption 75 W ■Dimensions 440 (W) X275 (D) X440(H)mm / 17-3/8 (W) x 10-7/8 (D) x 17-3/8 (H) inches ■Weight 16 kg / 35 lbs 5 oz ■Accessory Owner’s Manual ■Option Foot Switch (BOSS FS-5L,FS-5U,FS-6), Connection Cable (PCS-31)

* 0 dBu= 0.775 Vrms* The specifications are subject to change without notice.

VB-99 Specifications■AD Conversion 24 bits + AF method ■DA Conversion 24 bits ■Sampling Frequency 44.1 kHz ■Program Memories 400: 200 (User) + 200 (Preset) ■Nominal Input Level BASS INPUT: -10 dBu ■Input Impedance BASS INPUT: 2.2 M Ω ■Nominal Output Level MAIN OUT: -10 dBu, SUB OUT (XLR): +4 dBu, BASS OUT: -10 dBu ■Output Impedance MAIN OUT: 1 k Ω, SUB OUT (XLR): 600 Ω ■Dynamic Range 100 dB or greater (IHF-A) ■Controls Top Panel: OUTPUT LEVEL knob, Function knobs x 6 (F1–F6), BALANCE knob, V-BASS LEVEL knob, V-LINK button, DIRECT PATCH, buttons x 5 (1–5), CONTROL buttons x 2 (1, 2), COSM BASS buttons x 2 (A, B), BASS DIRECT button, POLY FX A/B buttons x 2 (A, B), FX buttons x 2 (A, B), COSM AMP buttons x 2 (A, B), MIXER buttons x 2 (A, B), DELAY/REVERB button, DYNAMIC button, CHAIN button, CONTROL ASSIGN button, NAME/KEY/BPM button, Function buttons x 6 (F1–F6), EXIT button, WRITE button, PAGE buttons x 2 (Left, Right), BASS TO MIDI button, SYSTEM button, GLOBAL button, TUNER button, CATEGORY button, PATCH/VALUE dial, Power switch, D BEAM (D Beam Controller, PITCH button, FILTER button, ASSIGNABLE button) ■RIBBON CONTROLLER Ribbon Controller, PITCH button, FILTER button, ASSIGNABLE button, Rear Pane: Ground Lift switch (SUB OUT)

■Display 240x64 dots graphic LCD (with backlit) Connectors Top Panel: GK IN connector (13-pin DIN type), Rear Panel: BASS INPUT jack (1/4” phone type), BASS OUTPUT jack (1/4” phone type), SUB OUT jacks x 2 (L, R) (XLR type), MAIN OUT jacks x 2 (L/MONO, R) (1/4” phone type), PHONES jack (Stereo 1/4” phone type), DIGITAL OUT jack (Coaxial type, conforms to IEC60958-3), EXP PEDAL jack (1/4” TRS phone type), CTL 3,4 jack (1/4” TRS phone type), USB connector (B type), RRC2 IN connector (RJ45 type), MIDI connectors x 2 (IN, OUT) (5-pin DIN type), DC IN jack ■Power Supply AC Adaptor (PSB-1U) ■Current Draw 1.3 A ■Dimensions 384.0 (W) x 218.0 (D) x 93.5 (H) mm, 15-1/8 (W) x 8-5/8 (D) x 3-11/16 (H) inches * EIA-5U rack mount type: optional rack mount adaptor RAD-99 ■Weight 2.1 kg / 4 lbs 11 oz (excluding AC Adaptor) ■Accessories Owner’s Manual, GK cable (5 m), USB cable, RRC2 cable, VB-99 Software CD-ROM, AC adaptor (PSB-1U), Knob Bolt x 4 ■Options Divided Pickup: GK-3B, MIDI Foot Controller: FC-300, Footswitch: BOSS FS-5U, Dual Footswitch: BOSS FS-6, Expression Pedal: EV-5, BOSS FV-500L/500H, GK Cable: GKC-10/5/3, Unit Selector: US-20, Rack Mount Adaptor: RAD-99, Pad Stand: PDS-10, Footswitch Cable: PCS-31, Carrying Bag: CB-VG9

* 0 dBu= 0.775 Vrms* The specifications are subject to change without notice.

VB-99 with Stand PDS-10 and Foot Controller FC-300

CB-VG9 Carrying Bag for VB-99 and FC-300

For bassists using Roland’s VB-99 and FC-300, the CB-VG9 is an ideal match for convenience, great fit and protection against common travel-related accidents. The CB-VG9 can also house a VB-99/PDS-10 combination.

Setup ExampleSetup Example

Digital Audio Player, etc.

FootswitchBOSS FS-6 or ( FS-5U/FS-5L, etc.)

FootswitchBOSS FS-6 or ( FS-5U/FS-5L, etc.)

Headphones

Digital Recorder, etc.

External Speaker(8Ω Max 80W)

Electric Guitar

PA-System

■Rear Panel

■Rear Panel ■Front Panel

■Top Panel

NPC_US_081217-r4.indd 20-21 12/18/08 5:38:12 PM