PRESENTATION

Shown images are for demonstration purposes only. Trademarks or logos belong to the respective holder.

INTRODUCTION

HELIOTransfers® correspond to heat transfers produced by Heliotextil that allow to customize various products and substrates using hot application processes.

Technology used in printing processes and materials achieves the highest level. This constitutes a self know how that results from a continuous research and development strategy.

The range available can generally be classified as follows:

Each quality has associated technical specifications and special finishings, allowing its suitabil-ity for the end use.

Beyond existing qualities, adapted solutions can be developed by our technical and research & development departments (r&d).

Among other products, Heliotextil creates, develops, produces and sells heat transfers under the name HELIOTransfers® using modern technologies, innovation, environmental sustainability, respecting human rights and health, by the orders of its customers mainly from the industrial domains of the textile and garments, sports, work wear, underwear, shoes and promotional items, located throughout the world.

01

Range General Classification Qualities

TRP Decorative Transfer, for less performing uses.HNHOFLK

RTR Roll to roll Transfer, for mass productions.HPSHPL

SUB Sublimation Transfer paper. FLSD

HELIO Technical Transfer, for more performing uses.

SSVR

VRFCP

PLUS

HEAT TRANSFERS

02

HELIO

General Characteristics

Iron Use

Presentation

Quality Certification

Colours

Dimensions (Useful Printing Area)

Graphic Quality

Does not stick or melt using iron directly over the applied transfer up to 120ºC keeping theiron moving.

Presented on a transparent film allows 100% quality inspection, perfect visualization and thecorrect placing of the motif before application.

● Certified product by several norms (consult “Quality Certifications”), namely “OEKO-TEX®Standard 100 Class I”, among others.● Comply with the requirements of the main brands.

“Base colours chart” available combined with our colours mixing system allows to matchdesired PANTONE® colours with high accuracy. No limits on number of colours.

● Up to 670x1000mm. ● REF (Reflective) quality up to 460x650mm.

High definition print (4 colour process/halftones), fine details and sharp edges.

Minimum Quantity Low minimum quantities of only 25 units, making it possible to develop samples, collections orsmall productions.

03

HELIO VR

“Very Resistant”● Very good resistance to friction● Washing up to 90ºC

“Flame Retardant”● Resistance to heat and flame● Very good resistance to friction● Washing up to 90ºC

● Workwear● Industrial laundry

● Workwear● Industrial laundry

HELIO VRF HELIO PLUS

Main Characteristics

Recommended Use

HELIO CP

“Coated Products”● Suitable for coated materials only● Low temperatures application

● Rainwear● Seawear (fishing, sports)● Special coated products

HELIO SS

“Smart Solution”● High elasticity● Smooth● Resistant● Low temperatures application

“Polypropylene Supports”● Elasticity● Smooth● Resistant● Very low temperatures application

Suits almost all textile materials.● Sportswear● Underwear● Bathwear● Etc.

Suits almost all textile materials.● Sportswear● Underwear● Bathwear● Etc.

Application Conditions

Temperature: 120-160ºCTime: 8-14 sec.Pressure: 3-6 BarRemoval Point: Hot PeelREF (Reflective) finishings removal point: Cold Peel.

Temperature: 150-190ºCTime: 10-14 sec.Pressure: 6-7 BarRemoval Point: Hot PeelREF (Reflective) and BM (Bright Matt) finishingsremoval point: Cold Peel.

Temperature: 120-130ºCTime: 10-12 sec.Pressure: 3-4 BarRemoval Point: Cold PeelREF (Reflective)finishings removal point: Cold Peel.

Temperature: 100-120ºCTime: 12-18 sec.Pressure: 3-4 BarRemoval Point: Warm Peel

Temperature: 180-200ºCTime: 12-16 sec.Pressure: 6-7 BarRemoval Point: Hot PeelREF (Reflective) finishings removal point: Cold Peel.

Washing Instructions

Indicated Bases

Coated materials, special finishings like Repellants, PU,PVC, etc.

Mainly polypropylene, high sensitivity to temperature.

Polyester, Cotton ormixtures.

Polyester, Cotton ormixtures.

Wide variety of materials: natural fibers (Cotton, etc),leather, synthetic fibers (Polyamide-Elastane, Polyester), with high elasticity, sensitive to high temperatures, etc.

Qualities

Legend:

1. Base should be clean before application.

2. Put the base on the heat press and position the transfer on the desired place.

3. Use the heat press with control of time, temperature and pressure.

4. Follow recommended application conditions indicated for each quality.

Application Sequence

HELIO

Storage

Tests

Recommendations

● Use a press with control of time, pressure and temperature.● Transparent film can be hot peel or cold peel. Please note that on REF (Reflective) and CP qualities, removal time is: cold peel.● The transfer reaches its maximal resistance 36 hours after its application.

● It is recommended to perform tests over the materials to be used.● Heliotextil is available to perform tests.

● Stock in a dry place, without dust and preferably with controlled temperature.● Do not expose to direct solar light or other heat sources.● Do not stack with weight.● In normal conditions recommended durability to apply a transfer is one year from its production.

ApplicationConditions

04

TRP

Quality Certification

Iron Use

General Characteristics

Do not use iron directly over the transfer once applied.

Product tested by several norms, consult “Quality Certifications”.

Minimum Quantity Minimum quantities vary by design and cost efficiency to be analyzed case by case.

Main Characteristics

Qualities

TRP HN TRP HO TRP FLKS

● Decorative transfer forvery wide range of uses.● Applied over differentmaterials, without hightecnhical performance.

● Offset transfer.● High printing quality,indicated for photographicimages or half-tones.● Applied over differentmaterials, without hightechnical performance.

● Flock Mono ColourTransfer.● Applied over different materials, without hightechnical performance.

Presentation Paper or transparent film Paper Flock paper - 5mm high

Graphic Quality High Very high Medium/Low

ApplicationConditions

Washing Instructions

Temperature: 160-180ºC Time: 12-15 sec. Pressure: 2-3 Bar

TRP FLKM

● Flock Multi Colour Transfer● Applied over different materials, without hightechnical performance.

RecommendedUse

● Underwear● Sportswear● Bathwear

● Shoes● Promotional textiles

● Textile products

● Underwear● Sportswear● Bathwear● Shoes and insoles● Promotional textiles● Textile products

Flock paper - 3mm high

Indicated Bases

Colours Reproduction toPANTONE® colours

Limited to availableflock colours.

Reproduction to PANTONE® colours with medium/low accuracy.

Wide variety of materials (not coated): natural and synthetic fibers, mixtures, leather, etc.

05

TRP

Legend:

1. Base should be clean before application.

2. Put the base on the heat press and position the transfer on the desired place.

3. Use the heat press with control of time, temperature and pressure. Follow the recommended application conditions.

4. Let the transfer cool and remove the transfer support while tepid.

Application Sequence

06

Storage

Tests

Recommendations

● Use a press with control of time, pressure and temperature.● The transfer support should be removed while tepid.● The transfer reaches its maximal resistance 36 hours after its application.

● It is recommended to perform tests over the materials to be used.● Heliotextil is available to perform tests.

● Stock in a dry place, without dust and preferably with controlled temperature.● Do not expose to direct solar light or other heat sources.● Do not stack with weight.● In normal conditions recommended durability to apply a transfer is one year from its production.

ApplicationConditions

RTR

Type of transfer

Quality Certification

Iron Use

Presentation

General Characteristics

● Heat transfer for Roll to Roll application.● Automatic application with immediate hot release.● Competitive solution for mass productions.

Do not use iron directly over the transfer once applied.

Product tested by several norms, consult “Quality Certifications”.

Paper or transparent film.

Colour Reproduction Reproduction to PANTONE® colours.

Graphic Quality High detail printing.

Minimum quantity

Dimensions

500 meters.

Width: 10mm up to 130mmLength: 10mm up to 250mm

No. of printing colours Front: up to 6 coloursReverse: 1 or 2 colours

Printing Colours Direct colours or 4 colour process.

Main Characteristics

Qualities

RTR HPS RTR HPL

“Hot Peel Strong”For strong colour supports.

“Hot Peel Light”For light colour supports.

Recommended Use ● Sportswear● Underwear

● Bath and swimming● Baby strollers

● Shoes and insoles● T-shirts

● Etc.

Application Conditions

Temperature: 170-200ºCTime: 1-5 sec.

Pressure: 2-3 Bar

Indicated Bases

Washing Instructions

Cotton, Polyamide, Polyester, no coated materials

07

RTR

Legend:

1. Follow the recommended application conditions and regulate the placement of the transfer on the base. Initiate the continuous application, placing the base on the press.

2. Remove the base from the press and continue the application.

Application Sequence

Storage

Tests

Recommendations

● Use a roll to roll press with control of time, pressure and temperature.● The transfer reaches its maximal resistance 36 hours after its application.

● It is recommended to perform tests over the materials to be used.● Heliotextil is available to perform tests.

● Stock in a dry place, without dust and preferably with controlled temperature.● Do not expose to direct solar light or other heat sources.● Do not stack with weight.● In normal conditions recommended durability to apply a transfer is one year from its production.

ApplicationConditions

08

SUB

Type of Heat Transfer

Iron Use

Presentation

General Characteristics

Transfer Paper for Sublimation.

Possible to iron the transferred motif after applied.

Paper in rolls or by piece.

Colour Reproduction Colour reproduction to required PANTONE®.

Graphic Quality Detailed printing with many colours.

Printing Colours Direct colours or 4 colours process.

Indicated Bases 100% Polyester or mainly Polyester composition.

Main Characteristics

Qualities

SUB FL SUB SD

● Flexo Printed Paper● Competitive solution for long runs in narrowapplications.

● Digital Printed Paper● Best solution for photographic or half tone images.● Competitive solution for small runs.

Recommended Use ● Sports outfits● Football equipments

● Cycling● Underwear

● Promotional Items● Etc.

Application Conditions Temperature: 190-210ºCTime: 20-30 sec.Pressure: 4-6 Bar

Dimensions Width: 10mm up to 150mmMotif Length: up to 250mm

Width: 10mm up to 1600mmMotif Length: up to 5 meters

Minimum Quantity 500 meters No minimums

Colours Direct colours or 4 colour processPANTONE® colours (Graphic or Textile)

No. of printing colours

Washing Instructions

Up to 6 colours No limits

09

SUB

Application Sequency

Storage

Tests

Recommendations

● Use a press with control of time, pressure and temperature.● The transfer reaches its maximal resistance 36 hours after its application.

● It is recommended to perform tests over the materials to be used.● Heliotextil is available to perform tests.

● Stock in a dry place, without dust and preferably with controlled temperature.● Do not expose to direct solar light or other heat sources.● Do not stack with weight.● In normal conditions recommended durability to apply a transfer is one year from its production.

ApplicationConditions

10

PAPER

FABRIC

1 - BADGE2 - SPONSOR SLEEVE3 - MAIN SPONSOR4 - NUMBER5 - BADGE

1 - NAME2 - MAIN SPONSOR3 - SPONSOR SLEEVE4 - NUMBER

1

2

3

4

1

2

4

3

5

COMMON DECORATION

INLINE

Heights:

- 100 mm

- 150 mm

- 250 mm

Heights:

- 100 mm

- 150 mm

- 250 mm

ROUND

Heights:

- 100 mm

- 150 mm

- 250 mm

CLASSIC

Height:

- 48 mm

CONDENSED

Height:

- 65 mm

ROUND

AVAILABLE COLORS

WHITE BLACK PMS 348 PMS 286 PMS 485 PMS 012 PMS 873 PMS 877

NUMBERS & LETTERS

BADGES: FLAT QUALITIES

COMMON SIZES (UP TO)

DIRECT COLORS HIGH DEFINITION

INTERACTIVE

EMBROIDERY EFFECT

SERIALIZATION NUMBERING SERIALIZATION + RFID CHIP

80mm 160mm

110mm

210mm

70mm

SPONSORS FRONT

SPONSORS BACK

BADGES

80mm 250mm

40mm

50mm

315mm

00

80mm

260mm

USER GUIDE

APPLICATION SEQUENCE

LEGEND:

1 - Base should be clean before application.

2 - Put the base on the heat press and position the transfer on the desired place.

3 - Use the heat press with control of time, temperature and pressure.

4 - Follow recommended application conditions indicated for each quality.

APPLICATION CONDITIONS

- Use a press with control of time, pressure and temperature.- The transfer reaches its maximal resistence 36 hours after its application.- Removal point: hot peel.

STORAGE

- Stock in a dry place, without dust and preferably with controlled temperature.- Do not expose to direct solar light or other heat sources.- Do not stack with weight.- In normal conditions recommended durability to apply a transfer is one yearafter its production.

TESTS - It is recommended to perform tests over the materials to be used.- Heliotextil is available to perform tests.

1 2

43

FINISHINGS

SP (Sports) REF (Reflective)

FLU (Fluorescent)

UV (Ultraviolet)PER (Pearlscent)

MET (Metallic)

16

FINISHINGS

GD (Glow in Dark) HD (High Definition)

GL (Glitter)

BM (Bright Matt)BTH (Breathable)

EB (Embroidery)

18

FINISHINGS

Resume

HELIOSS

HELIOCP

SP(Sports)

REF.

REF(Reflective)

MET(Metallic)

FLU(Fluorescent)

PER(Pearlescent)

UV(Ultraviolet)

GD(Glow in Dark)

HD(High Definition)

EB(Embroidery)

GL(Glitter)

BTH(Breathable)

BM(Bright Matt)

DESCRIPTION

Anti-migrationResistant to pigments migration of the bases.

ReflectiveCan be reproductedon desired colouror multicolours onthe same motif.

Metallic ColoursGold or Silver, bright or matt.

Fluorescent EffectsFluorescent colours.

Pearlescent Effects

UV Sensitive

Glow in the Dark

High DefinitionFine detail printing.

EmbroideryReproduction ofthe traditional textile embroidery, giving the thread look.

Metallic Sparkles

Micro Printed Holes

Bright and MattCombination of effects on the same motif.

USE

Materials with low fastness on colours that represent risk of sublimation, like for instance some sports fabrics.

High visibility and decoration, details or logo reproduction on several colours.

Metallic look.

Fashion or visibilityeffects.

Pearl look for several uses.

Discrete mark, visible with UV light. Possible solution for brands protection elements.

Phosphorescentfinishing to use on mixed environments with light and dark.

High resolution inreproducing photographic or half tones images.

Suitable for logos with many colours or light bases, where traditional embroidery is difficult to apply.

Decorative and fashion.

Ideal for bigger area prints that require breathable characteristics or aesthetics.

Different uses, allows to combine bright and matt effects on the same motif.

TRPHN

HELIOVR

TRPFLK

RTRHPL

RTRHPS

SUBLT

SUBSD

TRPHO

HELIOVRF

HELIOPLUS

19

QUALITY CERTIFICATIONS

20

QUALITY CERTIFICATIONS

21

* Our Heat-Transfers are tested to ensure high reliability on quality and performance according to the main textile standards.Results of tested norms are available upon demand.Interpretation:- Signed norms mean: tests were performed on those product qualities and submitted products comply with those norms.- Absence of sign mean: tests were not performed on those product qualities.- New tests and Norms can be at any time performed, meaning regular updates of this document are processed and available upon consult of dynamic presentations (Heat-Transfers Platform or website) or upon request.

Description

ISO 14184-1

ISO 105-B02

EN 71-3

EN 1122

EN 15777

ISO 15797

EN 14362-1

ISO 6330

ISO 105-E02

ISO 105-E03

EN ISO 20471

PVC FREE

EN 14704-1

EN ISO 11612

OEKO-TEXSTANDARD 100 - CLASS I

Textiles - Determination of formaldehyde.

Colour fastness to artificial light: xenon arc fading lamp test.

Safety of toys - Specification for migration of certain elements.

Plastics - Determination of cadmium. Wet composition method.

Textiles - Test method for phthalates.

Textiles - Industrial washing and finishing procedures for testing of workwear.

Textiles - Methods for determination of certain aromatic amines derived from azo colorants.

Textiles - Domestic washing and drying procedures for textile testing.

Colour fastness to sea water.

Colour fastness to chlorinated water (swimming pool water).

High visibility clothing.

HelioTransfers are certified as PVC free.

Determination of the elasticity of fabrics.

Protective clothing - Clothing to protect against heat and flame.

Testing for harmful substances to the human health, including babies and toddlersup to 3 years old, meeting the needed human-ecological requirements.

QualityISO

14184-1ISO

105-B02

Norms*EN

14362-1EN

1122ISO6330

EN15777

ISO15797

EN14704-1

ENISO

11612

ISO105-E02

ISO105-E03

EN 71-3 OEKO-TEXSTANDARD 100

EN ISO20471

HELIO SS

HELIO VR

HELIO CP

RTR

HELIO REF

HELIO VRF

HELIO PLUS

PVC FREE

Print with care

PVC free

HELIOTranfers by Helio

textil

S.A

.

22

23

Quality and Environment: Our commitment!

Implemented Quality management system provides framework tools to comply with all applicable statutory laws and regulations, as well as customers' requirements.We, therefore, also strive to reduce environmental pollution to the absolute minimum, using environmentally friendly raw-materials and reducing water consumption.These are commitments taken by our company and its products in order to prevent any risks to human health and environment.

Certifications: Our recognition!

Heliotextil is certified in accordance with ISO 9001, being thus a pioneer company in this business area to achieve this. Our Company is also certified by Oeko-Tex Standard 100 product class I. This means our products are tested for harmful substances, showing the results of the inspection that the products meet the human ecological standard requirements.Many other certifications are implemented and some represent unique products. Please consult our quality certifications shown ahead.

PVC Free: Our Environment!

Innovation: Our Inspiration!

Our own R&D workgroup manages specific projects that promote the research and development of better and innovative solutions on products and processes, being this aligned with company’s strategic objectives and considered as Our Inspiration or Driven Force.Our in-house testing labs and personnel training programs allows us to better focus on improving and developing new and innovative technologies, being critical factors to guarantee the best quality and performance of our products.

We continuously seek out for improving our organization and products with new and innovative solutions that contribute to ours and to customer’s business success.

We have implemented a PVC Free Certification. Our products are PVC Free based not only on the selection and development of “clean” raw materials as well on the highly controlled environment conditions within production facilities, guaranteeing no possible contaminations from outside sources. These detailed approach demonstrates our exigency to eliminate any potential risk of our products to contain PVC.

23

IGUAL CAPA

Shown images are for demonstration purposes only. Trademarks or logos belong to the respective holder.

HELIOTEXTILETIQUETAS E PASSAMANARIAS, S.A.Rua dos Combatentes do Ultramar - P.O.Box 4673701-914 S. João da Madeira - PORTUGALTel.: +351 256 201 100 - Fax: +351 256 832 824geral@heliotextil.com - www.heliotextil.com