Upload
ngokhue
View
218
Download
0
Embed Size (px)
Citation preview
CTC PROFILES FOR CARPET
Install one of CTC Carpet Trims whenever you need a transition between carpet and hard/soft surface flooring.
SPECIFICATIONSTILE TO CARPET TRANSITIONSProvide anodized aluminum strip with reveal at top edge for carpet protection and integral provision for anchoring to mortar bed or substrate. Height to match tile, stone or wood thickness. Reveal width and finish to be determined by architect.
CTC CARPET TRIMS (PRODUCT CODE) 800-236-5230
STOCK FINISHES• Clear• Bronze - BZ• Medium Bronze - MDBZ• Dark Bronze - DKB• Black - BL
SIZES• CTC CARPET TRIMS are sold in 8 foot lengths.• Manufactured in five heights: 1/4”, 11/32”, 3/8”, 7/16” and 1/2”.• Available in seven styles.
TILE THICKNESS PRODUCT CODE
1/4” 6mm CTC 14 CT11/32” 8mm CTC 1132 CT3/8” 9mm CTC 38 CT7/16” 10mm CTC 716 CT1/2” 12mm CTC 12 CT
.243
.385
.318
.360
.440
.250
.243 .278
.425
.375
.276
.228
.458
Vinyl
.250.125
.368
.360
.240
.368
.458
.404
TILE THICKNESS PRODUCT CODE
1/4” 6mm CTC 14 BCT
11/32” 8mm CTC 1132 BCT
7/16” 10mm CTC 716 CT
TILE THICKNESS PRODUCT CODE
3/8” 9mm CTC 38 CTS
7/16” 10mm CTC 716 CTS
TILE THICKNESS PRODUCT CODE
3/8” 9mm CTC 38 MCT
7/16” 10mm CTC 716 MCT
TILE THICKNESS PRODUCT CODE
1/4” 6mm CTC 14 CAT
11/32” 8mm CTC 1132 CAT
7/16” 10mm CTC 716 DB
TILE THICKNESS PRODUCT CODE
1/4” 6mm CTC 14 CTV
TILE THICKNESS PRODUCT CODE
3/8” 10mm CTC 38 CTB
CTC 38 CT
CTC 38 CTS
CTC 38 CTB
CTC 14 CAT
CTC 14 CTV
CTC 1132 BCT
CTC 716 MCT
CTC REDUCERS
The CTC 316 REDUCER can be used to transition vinylflooring to concrete. The CTC 316 REDUCER can be used to transition 3/16” thick flooring to concrete. Mechanically fasten using provided screws.• Meets ADA guidelines.• Protects edge of flooring with anodized aluminum overhang.• Can be used with vinyl, tile or carpet to concrete application.• *Available without holes
SPECIFICATIONSMetal Transitions: Provide aluminum transition where non-level flooring surfaces meet. Must meet ADA Guidelines. Height to match flooring.
STOCK FINISHES• Clear • Light Bronze • Medium Bronze • Dark Bronze • Black
SIZES• CTC 316 Reducer and CTC 99 Reducers are sold in 99” lengths.• Drilled and counter sunk with 1/4” x 1-3/4” concrete fasteners included.
The CTC 12 WT and the CTC 12 WC profiles are for for wood to carpet transitions, with a lip on both sides to protect the flooring materials. The gentle slope accepts medium traffic and meets ADA guidelines.
STOCK FINISHES• Clear • Light Bronze • Medium Bronze • Dark Bronze • Black
The CTC 99 REDUCER can be used to transition vinylflooring to concrete. Mechanically fasten using provided screws.• Meets ADA guidelines.• May be installed for temporary or permanent application.• Reduces impact damage where PVC/vinyl flooring ends.• *Available without holes
SPECIFICATIONSMetal Transitions: Provide anodized aluminum transition where non-level flooring surfaces meet. Must meet ADA Guidelines. Height to match flooring. 800-236-5230
SIZES• CTC 12 WT is sold in 8 foot lengths.• Use with 1/2” and 3/8” flooring.• CTC 12 WC is sold in 8 foot lengths.• Use with 1/2” and 1/4” flooring.
HEIGHT WIDTH PRODUCT CODE
1/8” 2” CTC 99 Reducer
3/16” 1-3/4” CTC 316 Reducer
HEIGHT WIDTH PRODUCT CODE
1/2” - 3/8” 15/16” CTC 12 WT
1/2” - 1/4” 1-5/16” CTC 12 WC
CTC 316 Reducer
CTC 12 WT
CTC 99 Reducer
CTC 12 WC
CTC REDUCERS
CTC WOOD REDUCERS
1.750
.200
.125
2.000
.950.550 .400 1.302 .248.550
CTC REDUCERS
The CTC RAMP can be used as a ceramic to vinyltransition. It provides a transition between tiled surfaces and adjoining floors. Mechanically fasten or glue down.
SPECIFICATIONS(See CTC Tranz)
STOCK FINISHES• Clear • Light Bronze • Medium Bronze • Dark Bronze • Black
FINISH OPTIONSProducts can be anodized with black (BL), dark bronze (DKB) medium bronze (MBZ), and light bronze (LB) finish. Call for lead time.
SIZES• CTC RAMP is sold in 8 foot lengths.• Use with 11/32” or 3/8” tile and 1/8” vinyl.
HEIGHT WIDTH PRODUCT CODE
11/32” 1” CTC Tranz 1132
3/8” 1-1/4” CTC Tranz 38
1/2” 1-13/16” CTC Tranz 12
HEIGHT WIDTH PRODUCT CODE
3/8” - 1/8” 1” CTC Ramp
3/8” - 1/8” 1” CTC Ramp XL
3/8” - 0” 1-3/8” CTC Ramp XLK
CTC TRANZ 1132 CTC TRANZ 12CTC TRANZ 38
CTC TRANZ
CTC RAMPS
.990 .390 1.843
.583
.125
.388
Ceramic Tool Co.
CTC RAMP XL
1.000
1.000
.125
.388
1.20 .425
1.365
.388
Ceramic Tool Co.
CTC RAMP XLK
The CTC TRANZ allows you to transition between any hard surface flooring and concrete. It meets ADA Guidelines and can be used for permanent or temporary applications. Mechanically fasten or glue down.
SPECIFICATIONSMetal Transitions: Provide anodized aluminum transition where non-level flooring surfaces meet. Must meet ADA Guidelines. Height to match tile, stone or wood thickness. 800-236-5230
STOCK FINISHES• Clear• Light Bronze • Medium Bronze • Dark Bronze• Black
SIZES• CTC TRANZ is sold in 8 foot lengths.• Manufactured in three heights: 11/32”, 3/8” and 1/2”.
CTC RAMP XL CTC RAMP CTC RAMP XLK
SPECIFICATIONSMetal Edge Strips: Provide anodized aluminum edge strip with 1/8” reveal at top edge and integral provision for anchoring to mortar bed or substrate. Height to match tile, stone or wood thickness. Finish to be determined by architect. CTC EDGE/CTC BAR 800-236-5230
STOCK FINISHES• Clear• Brass - BR• Bronze - BZ• Medium Bronze - MDBZ• Dark Bronze - DKBZ• Black - BL
The CTC EDGE is an anodized aluminum “L” angle. Use it as a divider strip between two different hard surfaces or carpet. The 1/8” reveal offers a finished edge while providing protection to valuable tile, stone or wood flooring.
SIZES• CTC EDGE is sold in 8 foot lengths.• Manufactured in eight heights: 1/4”, 11/32”, 3/8”, 7/16”, 1/2”, 5/8”, 3/4” and 7/8”.
The CTC SQ is an anodized aluminum corner profile designed for the meeting of wall tile. Although it can be used as a design accent, it primarily offers edge protection for tile on the wall meeting at a corner, extending to a natural point without having to miter the tile itself.
The CTC Bar is an anodized aluminum edge strip installed as a transition between different flooring products that are equal height/thickness or decoratively within a floor pattern.
STOCK FINISHES• Anodized Aluminum (clear) • Light Bronze• Medium Bronze • Dark Bronze • Black
SIZES • CTC 12 SQ is sold in 8 LF lengths• Manufactured in one (1) height: 1/2”• Reveal is 1/2” wide • CTC Bar is sold in eight foot lengths• Manufactured in one (1) height: 3/8”• Reveal is 1/8” wide
SPECIFICATIONSUsed in commercial or residential wall applications needing a finished corner. Can be used as a design element in a tiled floor or wall pattern. CTC 12 SQ would also work as a stair nosing, preventing chipping of tile on the riser or top tread. Can be installed to meet the lip edge, or under for additional edge protection.
The CTC Bar has vertical and horizontal applications - both floors and cladding are suitable for installation.Building entries where tile meets the walk-off mats is a common application. (CTC38T)
CTC “L” Angle
CTC EDGE
.115
.265
.295
CTC TRIMS
CTC CORNER TRIM
TILE THICKNESS PRODUCT CODE
1/4” 6mm CTC 14
5/16” 8mm CTC 1132
3/8” 9mm CTC 38
7/16” 10mm CTC 716
1/2” 12mm CTC 12
5/8” 15mm CTC 58
3/4” 20mm CTC 34
7/8” 22mm CTC 78
TILE THICKNESS PRODUCT CODE
1/2” 12mm CTC 12 SQ
3/8” 9mm CTC 38T
CTC 12 SQ
CTC Bar
.50
.46
.130
.400
CTC EXPANSION AND CONTROL JOINT
Standard Product Specifications: Part Two & Part Three
TILE THICKNESS PRODUCT CODE
5/16” 8mm DXJ 1132
3/8” 9mm DXJ 38
7/16” 10mm DXJ 716
1/2” 12mm DXJ 12
5/8” 15mm DXJ 58
3/4” 20mm DXJ 34
The CTC JOINTS are pre-molded caulk joints designed for use over control and cold joints in any area subject to foot or light vehicle traffic. The CTC JOINT is manufactured using anodized aluminum and a two part, chemical cure self-leveling sealant.
SPECIFICATIONSEXPANSION and CONTROL JOINTS Provide prefabricated caulk joint consisting of two solidextruded “L” angles with factory installed two partpolyurethane sealant. Color to match grout as specified by architect. Height to match tile, stone or wood thickness. Available in clear & bronze finish.CTC JOINT 800-236-5230
STOCK FINISHES• Clear
SIZES• CTC JOINT is sold in 8 foot lengths.• Manufactured in six heights:
11/32”, 3/8”, 7/16”, 1/2”, 5/8” and 3/4”.• Standard width 3/8”.• Custom widths and heights are available.
OPTIONS• SEALANT: Thirty (30) popular colors are stocked.
Over three hundred (300) custom colors are available.
• Sealant color determined by specified grout.• ALUMINUM: Clear and Bronze anodized aluminum.
CTC DXJ 716
.375
.458
PART TWO - PRODUCTS:Expansion and Control Joints: Provide prefabricated caulk joints consisting of two solid extruded “L” angles with factory installed two part polyurethane sealant, color to match grout joint color, specified by architect.Product Name - CTC JointManufacturer - Ceramic Tool Company800-236-5230 - Fax 262-513-9332
Part Three - Execution:Expansion and Control Joints: Provide prefabricated CTC Joint where shown and to comply with details, and if not shown and detailed, at locations to comply with recommendations in TCA “Handbook for Ceramic Tile Installation” Vertical and Horizontal Joint Design Essentials EJ-171-06
ADVANTAGES• Fully cured upon installation• Tile edge protected against chipping• Guaranteed adhesion• Resistant to wear, abrasion, penetration and puncture• Withstands movement without distortion or failure
COLORSSealant: Thirty (30) colors are stocked. Over three hundred (300) colors are available. Aluminum: Clear and Bronze anodized
CTC Expansion Joint
CTC CUSTOM STAINLESS STEEL PRODUCTS
Products We Distribute
In addition to manufacturing its own line of flooring transitions, Ceramic Tool Company is also a resource for the contractor; we are able to locate difficult to find products, alternates for items that are out of stock or have long lead times, or products that offer the same features as the specified trim at a lower price.
Stainless steel specifications are no longer confined strictly to hospitals, restrooms or kitchens. If you can dream the shape, we can bend it into reality.
Finishes such as Brushed Stainless, or stainless with a mirror polish, have become more popular in retail and commercial construction. Ceramic Tool offers a range of finishes for stainless steel products.
Call us today – We’ll make EXACTLY what you want!