C_tbit44_71 q and A

8/10/2019 C_tbit44_71 q and A

1/36

fonoitcelloCetelpmoCteG 17_44TIBT_C .srewsnAdnasnoitseuQs'maxE/moc.deifitrectieb.www//:ptth

PASmaxE 17_44TIBT_C

etaicossAtnempoleveDdeifitreC - PAShtiwnoitargetnIssecorP)1.7IP(revaeWteN

:snoitseuQlatoT 08 s'A&Q

LRUbeW : pas/moc.deifitrectieb.www//:ptth - 17_44tibt_c - maxe - mth.30443

deifitreCTIeB 17_44TIBT_C gnivaS

kcaP

tnemucoDFDPelbatnirP

enilffoydutsdnadaolnwoD

hsilgnEnialpninettirW

!etarsseccustsehgiH snoitseuqllarofsrewsnadeifireV

ruoyseetnaraugdeifitreCTIeB tpmettatsrifruoytasseccusgniydutsruollewgniretsamdnagnidnatsrednuylnohtiw

lliwew,emittsrifehttamaxeehtliafuoywohemosfi,lairetam .uoyrofDNUFERLLUFegnarra

8/10/2019 C_tbit44_71 q and A

2/36

QUESTION NO: 1

The PI Mail adapter is used to send and receive emails. Which protocols are supported? Note:

There are 3 correct answers to this question.

A. SMTPB. HTTP

C. IMAP4

D. POP3

Answer: A,C,D

Explanation:

QUESTION NO: 2

You are implementing an IDoc-based scenario using SAP Netweaver PI and more specifically the

sender IDoc adapter. Which of these steps are mandatory for the sender IDoc adapter to function

properly?

Note: There are 3 correct answers to this question.

A. IDoc metadata must be imported into the Enterprise Services Repository.

B. The Logical System name (ALE name) for the Business System must be defined in the SLD.

C. A sender communication channel must be defined in the Integration Builder.

D. An RFC destination must be defined on the sender system, pointing to the Integration Server

client.

Answer: A,B,D

Explanation:

QUESTION NO: 3

Assume that your customer has a scenario in which a database table needs to be queried (i.e. to

perform a SELECT statement and obtain the result set). What are the viable options for

implementing this with the PI JDBC adapter?


A Use the sender JDBC adapter to query the database asynchronously

SAP C-TBIT44-71 Exam

8/10/2019 C_tbit44_71 q and A

3/36

C. Use the receiver JDBC adapter to query the database synchronously.

D. Use the receiver JDBC adapter to query the database asynchronously.

Answer: A,C

Explanation:

QUESTION NO: 4

Which statements are correct when using the Receiver File adapter to process XML messages?


A. The messages are processed based on a poll cycle.B. The adapter can convert the XML payload into a flat file.

C. The adapter can FTP the file to a remote directory.

D. The quality of service can be 'best effort' (BE) only.

Answer: B,C

Explanation:

QUESTION NO: 5

You have implemented a scenario where IDocs are posted to an ERP system using the receiver

IDoc adapter.

Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI?


A. IDoc packages are not supported, unless all IDocs are collected by BPM.

B. Specific fields in the IDoc control record can be overwritten using the 'header mapping'

functionality in the Receiver Agreement.

C. Quality of service EOIO (exactly once in order) is supported, provided that the target system is

a SAP Web AS 6.40 or above.

D. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best effort)

and EO (exactly once) can be used.

E. A receiver communication channel must be defined in the Integration Builder.

Answer: B C E


8/10/2019 C_tbit44_71 q and A

4/36

Explanation:

QUESTION NO: 6

The communication between the Integration Server and the backend applications can be achievedwithout adapters.

Which message protocol should you use for this communication type?

A. RFC-XML

B. PI-SOAP Protocol

C. File

D. JDBC 2.0

Answer: B

Explanation:

QUESTION NO: 7

A special aspect in B2B business processes is that the business partners involved in these

processes do not usually provide information about their internal system landscape.

Which configuration objects are relevant for B2B configuration?


A. Receiver Determination

B. Communication Party

C. Software Component Version (SWCV)

D. Communication Channel

Answer: A,B,D

Explanation:

QUESTION NO: 8

You configure the sender RFC adapter to convert RFC calls from a sender to XML messages.


8/10/2019 C_tbit44_71 q and A

5/36

What is the purpose of the RFC adapter parameter "Program ID"?

A. The Program ID is a unique identifier for outbound proxies.

B. The Program ID must uniquely describe the RFC sender communication channel in the

configured application server gateway.

C. The Program ID identifies proxy classes for Service Interfaces.

D. The Program ID is used in correlation for binding abstract interfaces.

Answer: B

Explanation:

QUESTION NO: 9

You have created a deadline branch. When the deadline has expired, the integration processshould be canceled.

How can this be achieved?

A. In the deadline branch, insert a control step that cancels the process.

B. The process is automatically stopped once the deadline has expired.

C. As the process can only be stopped by the administrator, a control step that raises an alert to

inform the administrator has to be inserted.D. Insert a switch with an appropriate condition to stop the process.

Answer: A

Explanation:

QUESTION NO: 10

To react to situations where it is not possible or not advisable to continue a process in the normal

way, you can define exceptions.

Which statements correctly describe the triggering of exceptions?


A. A synchronous or asynchronous Send step can trigger an exception when a system error

occurs.

B Every step type can trigger an exception when a permanent error occurs


8/10/2019 C_tbit44_71 q and A

6/36

D. A Transformation step can trigger an exception.

E. Exceptions can only be triggered by Control steps.

Answer: A,C,D

Explanation:

QUESTION NO: 11

Which of these operations can be performed by a Container Operation step?


A. Incrementing a counter variable.

B. Appending a message to a multiline container element.

C. Removing a message from a multiline container element.

D. Setting the value of an XML element of a message.

Answer: A,B

Explanation:

QUESTION NO: 12

You can create multiple configurations for one Integration Process without changing the

appropriate process definition.

Which of these parameters allows you to achieve this behavior?

A. Process Signature

B. Container DefinitionC. Correlation

D. Configurable Parameters in Conditions

Answer: D

Explanation:

QUESTION NO: 13

If a system error occurs in a send step an alert can be triggered for Alert Management and the


8/10/2019 C_tbit44_71 q and A

7/36

Where do you define the Alert Category for the appropriate Control Step?

A. Within the SLD

B. Within the transaction ALRTCATDEF on the Integration Server

C. Within the Enterprise Services Builder

D. Within the Process Editor

Answer: B

Explanation:

QUESTION NO: 14

Which Process Integration objects can be used in an integration process?

A. All objects displayed in the navigation area of the Integration Builder.

B. All objects within the software component version of the integration process.

C. Only the objects within the namespace of the integration process.

D. All objects displayed in the Process Integration Scenario using this process.

Answer: B

Explanation:

QUESTION NO: 15

For the delivery mode of an integration process, you can choose between inbound processing with

or without buffering.

Which of these statements correctly describes the Inbound processing mode?


A. SAP recommends the mode for inbound processing with buffering.

B. SAP recommends the mode for inbound processing without buffering.

C. If you select inbound processing without buffering, the qRFC entry returns an error when a

message is to be delivered to a process instance for which no receive step is active.

D. If you select inbound processing with buffering and there is no active receive step available to

receive an incoming message, the message is buffered in a separate, process-instance-specific

queue.

A B C D


8/10/2019 C_tbit44_71 q and A

8/36

Explanation:

QUESTION NO: 16

Which transaction can be used in order to configure the Business Process Engine?


A. SWF_XI_CUSTOMIZING

B. SWIA

C. SMQ2

D. SWF_INB_CONF

Answer: A,D

Explanation:

QUESTION NO: 17

Considerable throughput improvements can be expected for BPE processes when using message

packaging.

What are the advantages of this feature?


A. Increased message throughput

B. Increased BPE performance

C. Improved alert handling

D. Reduced computer time

Answer: A,B,D

Explanation:

QUESTION NO: 18

You can influence the transactional behavior during the definition of an integration process in theprocess editor. This can improve the performance of your integration process.


8/10/2019 C_tbit44_71 q and A

9/36

Which step types allow the suppression of the creation of a new transaction?


A. Transformation Step

B. Receiver Determination StepC. Receive Step

D. Send Step

Answer: A,B,D

Explanation:

QUESTION NO: 19

When deciding whether an integration process might be the right solution for your integration

scenario, you have to consider some prerequisites.

Which of them are relevant for integration processes?


A. The messages to be processed are related to each other in some way.

B. The scenario must require synchronous communication.

C. The process should have a clear end condition.

D. The scenario does not require complex user interaction.

Answer: A,C,D

Explanation:

QUESTION NO: 20

Which of the following is a correct statement about a Software Component?

A. A Software Component is a unit of software delivery that has its own versioning and its own

support package track.

B. A Software Component is the basic building block of an enterprise service.

C. A Software Component is a collection of Products; both the Software Component and the

Products have their own versions.

D A Software Component is an alternate means of organizing content development within the


8/10/2019 C_tbit44_71 q and A

10/36

Answer: A

Explanation:

QUESTION NO: 21

You are working in the System Landscape Directory (SLD) defining a Business System for use in

an IDoc scenario.

Why do you assign a Logical System name?

A. The IDoc adapter will make use of this entry to resolve a Business System name into an ALE

logical system name and vice-versa.

B. If a Logical System name is defined for the Business System, the Integration Directory canautomatically determine a receiver.

C. Definition of the Logical System name in the System Landscape Directory is required by the

ALE distribution model in the sender system.

D. The SOAP header of the inbound message uses the Logical System name.

Answer: A

Explanation:

QUESTION NO: 22

When creating a Technical System in the System Landscape Directory you select and add the

Software Products that are installed on this Technical System. As an option you can de-select the

Software Components associated with the selected Products.

Why is this option necessary?

A. The Software Component is required only for transport purposes.

B. Certain Software Components might not be part of the particular version of the product.

C. The developer using the Technical System description may not have sufficient authorization to

work with the Software Component in question.

D. The appropriate Technical System may not include all possible components of the selected

products.

Answer: D

Explanation:


8/10/2019 C_tbit44_71 q and A

11/36

QUESTION NO: 23

Business systems are systems which function as sender or receiver within SAP NetWeaver PI.

Which parameter defines the type of Business system in the SLD?

A. The type of Business system is defined by the used connectivity mode.

B. The type of Business system is created when the systems register automatically on the SLD.

C. The type of Business system is defined by the type of associated technical system.

D. The type of Business systems is always Third-Party.

Answer: C

Explanation:

QUESTION NO: 24

You assign each service interface an interface pattern, which describes the type of communication

to be executed.

Which of these patterns are supported by SAP NetWeaver PI?


A. Stateless (XI 3.0-Compatible)

B. Tentative Update & Confirm/Compensate (TU&C/C)

C. Stateful

D. Synchronous

Answer: A,B,C

Explanation:

QUESTION NO: 25

What are the features of an Integration Process?


A It is an executable cross system process


8/10/2019 C_tbit44_71 q and A

12/36

C. It is able to receive and collect messages.

D. It is not a part of configuration time activities.

Answer: A,C

Explanation:

QUESTION NO: 26

For which of the following is a Context object a placeholder for?

A. A Namespace.

B. An XPATH expression.

C. An Operation Mapping.

D. A Receiver Determination.E. A Value Mapping.

Answer: B

Explanation:

QUESTION NO: 27

Proxies are interfaces that are generated in application systems to communicate with the

Integration Server.

Which of these statements correctly describe proxies?


A. Proxies are generated based on the service interfaces located in the Enterprise ServicesRepository.

B. SAP systems based on Release 4.6 are able to exchange data by using PI-SOAP protocol.

C. The service interface category determines which proxy objects are generated (consumer proxy

or provider proxy).

D. Proxies are generated in the Integration Builder.

Answer: A,C

Explanation:


8/10/2019 C_tbit44_71 q and A

13/36

What are the three types of Communication Components in the Integration Directory?

A. Business Component, Integration Process, Business System.

B. Business System, Logical System, Application Component.

C. Name, Namespace, Software Component Version.

D. Business Service, Application Service, Abstract Service.

Answer: A

Explanation:

QUESTION NO: 29

There are three task areas in the Integration Directory: Collaboration Profiles, Logical Routing, and

Collaboration Agreements.

What do you define in a Collaboration Agreement?

A. The security settings for specific sender/receiver pairs.

B. The flow of messages in a system landscape.

C. The technical options available to the communication parties for exchanging messages are

documented.

D. A Business Process is imported into the Integration Directory.

Answer: A

Explanation:

QUESTION NO: 30

Which of the following statements are true regarding Sender Agreement and Receiver

Agreement?


A. They specify a binding between an interface and a communication channel.

B. They contain additional security settings, such as certificates.

C. They are analyzed by the adapter engine.

D. They are defined in the Enterprise Services Repository.

E. They are configured in the 'Modules' tab of the Communication Channel.

A A B C


8/10/2019 C_tbit44_71 q and A

14/36

Explanation:

QUESTION NO: 31

You use a receiver determination to define one or more receivers for a sender communicationcomponent and an outbound service interface. You can make the receiver determination

conditional on the value of a field in the payload.

What do you do to set up this content-based routing?

A. Write a value mapping function in the Enterprise Services Repository and import it into the

Integration Builder.

B. Specify alternative identifiers in the definition of the party.

C. You can only set up content-based routing by using the Configuration Assistant.

D. Use the Condition Editor to enter conditions (XPATH/Context object) for routing.

Answer: D

Explanation:

QUESTION NO: 32

Process Integration provides a lot of flexibility during the mapping/transformation process from

source document to target. This flexibility includes the usage of multiple mapping steps.

Which statement correctly describes the characteristics of combined mapping steps?

A. All of the mapping steps must be of one type of mapping, e.g. they must all be Message

Mapping, or they must all be XSLT mapping.

B. Multiple mapping steps can be used, only by using Java mapping, due to Java's ability toaccess internal mapping programs.

C. Only by using XSLT mapping can we use multiple mapping steps. This is based on using

"includes" of multiple XSLT's within the mapping process.

D. Any mapping method can be used with any combination. E.g. you can create a graphical

Message Mapping followed by Java and XSLT mapping.

Answer: D

Explanation:


8/10/2019 C_tbit44_71 q and A

15/36

You are developing a Message Mapping. In the mapping description, the source values for the

target elements first name, middle name and last name are all assigned to the same source

element (e.g. name). This results in a repeating occurrence for this source element.

Which standard function would you recommend for mapping the repeating element 'name' in the

source to the specific fields (e.g. first name, middle name and last name) in the target structure?

A. There is no such standard function in Process Integration, you would need to write a user

defined function.

B. You can use the "CopyValue" function in the Constant function group.

C. You can use the "SplitByValue" function in the Node function group.

D. You can use the "ValueMapping" function in the Conversions function group.

Answer: B

Explanation:

QUESTION NO: 34

You have created a Message Mapping by using the simple drag&drop from source to target

element. However, when testing the mapping by entering only one value for the source element,

you find that the target element has been created with 3 occurrences. Each of the target elements

filled the same value as the source element.

What might go wrong?

A. The data type for the source element has a minOccurs=3. Therefore, when only 1 value is

entered for the element, it is repeated 3 times.

B. The data type for the source element has a maxOccurs=3. Therefore, when only 1 value is

entered for the element, it is repeated 3 times.

C. The data type for the target element has a minOccurs=3. Therefore, when only 1 value is

mapped to the element, it is repeated 3 times.D. The data type for the target element has a maxOccurs=3. Therefore, when only 1 value is

mapped to the element, it is repeated 3 times.

Answer: C

Explanation:

QUESTION NO: 35

While looking through some message mapping examples currently in production you notice that


8/10/2019 C_tbit44_71 q and A

16/36

Why might this step be necessary before you can apply the required mapping functions?

A. To check whether an element in the source document has any value before any mapping or

transformation is performed.

B. To check whether the element exists in the source document before any mapping or

transformation can be done.

C. To check whether a parent element has any child nodes before using their values in mappings

and transformations.

D. To check whether an element in the source document has any value before any mapping or

transformation can be performed.

Answer: B

Explanation:

QUESTION NO: 36

Assume that during the mapping process, the customer asks for certain information to be logged

to the Process Integration monitor for examination using SXMB_MONI. A user-defined function wil

be used to perform the appropriate mapping function.

Which of these statements correctly describes the user-defined function?

A. A user-function cannot be used to send information to the PI monitor.

B. All user-defined functions have access to a global static class, MappingTrace, which can be

used to send messages to the PI monitor.

C. An AbstractTrace object must be obtained from the Container object. Then, it can be used to

send messages to the PI monitor.

D. An AbstractMapping object must be obtained from the GlobalContainer object. The

GlobalContainer object can be obtained from the Container object. Then, AbstractMapping can be

used to send messages to the PI monitor.

Answer: C

Explanation:

QUESTION NO: 37

The graphical Process Integration mapping tool provides adjustment capabilities for message

mappings. This can be done using the mapping function "Reload with Improvements ()".

Which of these statements describe the purpose of this function?


8/10/2019 C_tbit44_71 q and A

17/36


A. Tool support to adjust mappings after structure changes (e.g. changes of the root name or

namespace).

B. Applies to changes of the source and the target structure.

C. Reloading test messages.

D. Mapping original nodes to new nodes.

Answer: A,B,D

Explanation:

QUESTION NO: 38

Message Mapping has a concept of "Queue", which can be used in a user-defined function withparameter "Execution Type" set to "All Values of Queue".

Which statements correctly describe working with Queues and Contexts in Message Mapping?


A. Message Mapping works internally by using queues.

B. If no further elements are imported at a particular hierarchy level, a Context Change is insertedin the queue.

C. Node functions are used to handle changes in the message hierarchy.

D. A context contains one or more queues.

Answer: A,B,C

Explanation:

QUESTION NO: 39

A mapping requires the concatenation of 2 source elements in order to create a target element.

During testing, the 1st source element occurs 2 times; the 2nd source element occurs 4 times.

How many occurrences will the target element contain?

A. The target will occur 2 times. This is based on the minimum number of occurrences between

the 2 elements.

B The target will occur 4 times This is based on the maximum number of occurrences between


8/10/2019 C_tbit44_71 q and A

18/36

C. The target will occur 8 times. This is based on the total number of possible concatenations

between the occurrences of the 2 elements. The number is the product of (2 * 4).

D. The target will occur 6 times. This is based on the sum of the number of occurrences for both

elements.

Answer: B

Explanation:

QUESTION NO: 40

After reviewing the specifications for a transformation, you found out that you need to save certain

data for a later retrieval during the mapping process.

Which technique helps you to accomplish this goal?

A. You must use user-defined functions with execution type set to "All Values of Queue" or you will

not have access to the required java objects Container and GlobalContainer.

B. You can use the GlobalContainer object to store the values in parameters which can be

retrieved later in the same message mapping.

C. You can use the Container object to store the values in parameters which can be retrieved later

in the same message mapping.

D. The GlobalContainer object can be used to save and retrieve data by multiple message

mappings. The data is stored as persistent objects in the database, therefore, care must be takento re-initialize, clear or delete the data.

Answer: B

Explanation:

QUESTION NO: 41

Which Lookup functions are supported in the graphical message mapping tool?


A. JDBC Lookups

B. RFC Lookups

C. Java Library Lookups

D. ES Registry Lookups

Answer: A,B


8/10/2019 C_tbit44_71 q and A

19/36

QUESTION NO: 42

While using Message Mapping during an implementation of a Process Integration project, you may

want to test the value of an element using the Boolean function.

How does the Boolean function in Message Mapping interpret the result of the test?

A. It interprets 1 and true (not case-sensitive) as true-value.

B. It interprets only true (not case-sensitive) as true-value.

C. It interprets only TRUE (case-sensitive) as true-value.

D. It interprets only true (case-sensitive) as true-value.

Answer: A

Explanation:

QUESTION NO: 43

Within Process Integration Message Mapping you can set up Function Libraries for user-defined

functions.

When would you do this?


A. When you want to reuse user-defined functions.

B. When you want to avoid multiple user-defined functions for the same purpose.

C. When you want to avoid the usage of graphical mapping functions for complex mappings.

D. When you want to enhance the portability of user-defined functions.

Answer: A,B

Explanation:

QUESTION NO: 44

By using a mapping lookup, mapping programs can call functions from other application systemswhile a mapping program on the Integration Server is being executed.


8/10/2019 C_tbit44_71 q and A

20/36

Why might this be necessary?


A. To call existing mapping routines in the application system.

B. To enable user interaction at runtime.C. To write data to a database from a mapping.

D. To read from application system data in the mapping program.

Answer: A,D

Explanation:

QUESTION NO: 45

You are considering the use of Process Integration adapters to implement an integration scenario.

Considering the nature of the backend applications, which of these questions should be addressed

when searching for the adapter to be implemented?


A. Is the backend application based on SAP Web AS 6.20 or above?

B. Does the backend application support JCA (Java Connector Architecture)?

C. Is the vendor of the backend application SAP-certified?

D. Does the backend application provide connectivity using Industry Standards?

Answer: A,D

Explanation:

QUESTION NO: 46

After you have created a Business System in the SLD, you can assign a transport target to this

system.

What is the purpose of a transport target?

A. A transport target is a SAP NetWeaver PI component to support the software logistic tasks.B. With transport targets, you can associate the names of corresponding Business Systems in


8/10/2019 C_tbit44_71 q and A

21/36

C. Transport targets describe software dependencies.

D. Transport targets can be imported into the Integration Builder.

Answer: B

Explanation:

QUESTION NO: 47

Some adapters come from SAP, and some come from 3rd parties.

Which of the following is a 3rd party adapter?

A. EDI

B. IDoc

C. RFC

D. HTTP

Answer: A

Explanation:

QUESTION NO: 48

The JDBC and JMS adapters are used to connect to database and queue providers respectively.

Which of these additional steps are needed for these adapters to function properly, apart from

normal configuration steps?

A. Update CPA-Cache in the adapter framework.

B. Deploy vendor-specific drivers into SAP J2EE engine.C. Configure sender or receiver agreements in the integration builder configuration.

D. Create the communication channel with assignment either to a service or party.

Answer: B

Explanation:

QUESTION NO: 49

In a customer scenario messages are sent from the PI Integration Server to the Advanced


8/10/2019 C_tbit44_71 q and A

22/36

8/10/2019 C_tbit44_71 q and A

23/36

source and target structures into the memory. Therefore Message Mapping is more efficient and

can handle deep structured XML documents faster.

Answer: D

Explanation:

QUESTION NO: 52

A useful mapping feature in PI is "Multi-Mapping".

In which situation is Multi-Mapping most advantageous?

A. Multi-Mapping can be used when you want to map an interface from a sender business system

to multiple receiver business systems. Such mappings can be combined into 1 mapping for easier

development and maintenance.

B. Multi-Mapping can be used in ccBPM with abstract interfaces, when there is a need for n:m

transformations.

C. Multi-Mapping is an enhancement of PI's multi-mapping steps, where a target to a source can

be defined to consist of more than 1 mapping steps.

D. Multi-Mapping is a tool which works in conjunction with Mapping Templates. This new tool

provides a consolidated view of all the mapping templates being used by a specific mapping.

Answer: BExplanation:

QUESTION NO: 53

Process Integration has the capability to use multiple mappings between interfaces.

Which of these statements correctly describes working with multiple mapping steps?

A. All mappings are declared in Operation Mappings within the Enterprise Services Repository.

The types of mappings and the names of the mapping programs can be specified there.

B. All the mapping steps are declared in Interface Determination within the Integration Builder,

where the interfaces and all the mapping programs for each interface are specified.

C. All the mapping steps are configured in the Message tab of the Message Mapping within the

Enterprise Service Repository.

D. Multiple mappings within an Operation Mapping should be registered in the SLD.

Answer: A


8/10/2019 C_tbit44_71 q and A

24/36

QUESTION NO: 54

Integration Processes run on the SAP Business Workflow Engine of the SAP NetWeaver AS

ABAP.

When monitoring a workflow that was started by an Integration Process, which of following could

be a valid status for a workflow execution?


A. Started

B. CancelledC. Error

D. Reprocessed

E. Hold

Answer: A,B,C

Explanation:

QUESTION NO: 55

Integration Processes are executed by the Business Process Engine at runtime.

What is the Business Process Engine?

A. An enhancement of the SAP Business Workflow Engine.

B. An add-on component that is installed using transaction SAINT.

C. A component of the J2EE stack of the SAP NetWeaver Application Server.

D. A replacement for the SAP Business Workflow Engine.

Answer: A

Explanation:

QUESTION NO: 56

Technical systems are application systems that are installed on your system landscape.


8/10/2019 C_tbit44_71 q and A

25/36

Which of these statements correctly describe the properties of technical systems?


A. Technical systems are logical systems which function as senders or receivers within SAP

Netweaver PI.B. ABAP Technical systems are normally registered in the SLD server automatically.

C. Technical systems can be assigned to products.

D. Technical systems from type XPI are infrastructure systems, e.g. Adapter Engines.

Answer: B,C,D

Explanation:

QUESTION NO: 57

SAP NetWeaver Process Integration supports major key capabilities within the integration area.

What areas belong to these capabilities?


A. Enterprise Service Repository and Registry

B. Knowledge Warehouse

C. BAM Infrastructure

D. Service Bus

Answer: A,C,D

Explanation:

QUESTION NO: 58

In order to support portability and interoperability of integration processes, SAP supports and

implements a large set of industry standards.

Which of these standards are supported by SAP NetWeaver Process Integration?



8/10/2019 C_tbit44_71 q and A

26/36

A. WS-BPEL 2.0

B. XPDL

C. BPEL4WS1.1

D. UDDIv3

Answer: A,C,D

Explanation:

QUESTION NO: 59

Which PI component belongs to the configuration time area?

A. Enterprise Services Repository

B. Business Process EngineC. Integration Builder

D. Services Registry

Answer: C

Explanation:

QUESTION NO: 60

Application systems with a Local Integration Engine are able to communicate via PI protocol

(SOAP with attachments) with the Central Integration Engine.

Which of these statements correctly describe this type of communication?


A. The local Proxy-Runtime converts between PI protocol and ABAP or Java format.

B. The application systems send messages directly to the Advanced Adapter Engine via PI

protocol.

C. Proxy communication does not require adapters.

D. The application systems send messages directly to the Advanced Adapter Engine via the

SOAP adapter.

Answer: A,C

Explanation:


8/10/2019 C_tbit44_71 q and A

27/36

QUESTION NO: 61

Whenever you are using Web services in business-critical applications, it is important that

messages are exchanged in a reliable manner.

Which statements correctly describe the features of the Web Service Reliable Messaging Protocol(WS-RM)?


A. A sequence covers all calls of a logical unit of work (LUW) and assigns numbers to them.

B. WS-RM is a protocol for synchronous communication.

C. WS-RM should be implemented at sender and receiver sides.

D. The WS-RM protocol combines one or multiple messages into sequences.

Answer: A,C,D

Explanation:

QUESTION NO: 62

A SOAP client calls a PI, using the sender SOAP adapter.

Which of the following statements correctly describe using the quality of service of 'Exactly Once'?


A. A message ID must be provided with the message, otherwise an error will occur.

B. When providing the message ID externally, the parameters 'Use Encoded Headers' and 'Use

Query String' must be set to true.

C. A receiver determination is not necessary.

D. If the message ID has been used before, the message will be marked as duplicate and then

discarded.

Answer: B,D

Explanation:

QUESTION NO: 63


8/10/2019 C_tbit44_71 q and A

28/36

8/10/2019 C_tbit44_71 q and A

29/36

C. An ABAP report, created using transaction SE80.

D. Enterprise Service Builder.

Answer: A,B,C

Explanation:

QUESTION NO: 66

In the Web Service Reliable Messaging programming model (WS-RM) messages are transferred

from the service consumer to the service provider using logical sequences.

What statements about a logical sequence within WS-RM are true?


A. It is a container that contains a technical sequence of one or more messages.

B. It has a unique identifier.

C. It describes the sequence of messages in EDI integration scenarios.

D. It is created in the Advanced Adapter Engine for incoming messages.

Answer: A,B

Explanation:

QUESTION NO: 67

You use a Direct Connection to configure direct communication between two business systems.

Which statements describe such a connection?


A. In direct communication, two business systems use the Web service runtime to communicate

with each other directly without using a central Integration Server.

B. You can use Process Integration runtime services such as mapping in direct communication.

C. You can make the necessary configuration settings for the involved systems centrally in the

Integration Builder.

D. Direct communication is based on the standard Web Service Reliable Messaging protocol (WS-

RM).


8/10/2019 C_tbit44_71 q and A

30/36

Explanation:

QUESTION NO: 68

Which of the following statements about Enterprise Services are true?


A. They are semantically harmonized across applications.

B. They are based on Global Data Types, which are defined using the UN/CEFACT Core

Component Technical Specification (CCTS).

C. They can only be executed synchronously.

D. They are not different from regular web services.

Answer: B,C

Explanation:

QUESTION NO: 69

What is a PI Pipeline?

A. A proxy object in the Java runtime

B. An integration engine configured as a HUB

C. An integration server on an application system

D. A configured sequence of pipeline services

Answer: D

Explanation:

QUESTION NO: 70

Which of the following tuning parameters are used to improve performance when processing

messages with Quality of Service Exactly Once (EO)?


A. EO_INBOUND_PARALLEL


8/10/2019 C_tbit44_71 q and A

31/36

C. QUEUE_COUPLING

D. QRFC_QUEUE_RESTART_ALLOWED

E. LOGGING_SYNC

Answer: A,B

Explanation:

QUESTION NO: 71

Integration Pipelines are used to process messages in SAP NetWeaver Process Integration and in

SAP Applications.

Which of the following are valid pipeline types?


A. CENTRAL

B. SENDER

C. SENDER_BACK

D. ACKNOWLEDGEMENT

E. ACKNOWLEDGEMENT_BACK

Answer: A,B,C

Explanation:

QUESTION NO: 72

XML validation allows you to check the structure of a PI message payload.

Which of the following steps within PI message processing allow the implementation of XML

validation?


A. In the inbound processing, the message is validated in the Business Process Engine or in the

Integration Engine.

B. In the inbound processing, the message is validated in the Advanced Adapter Engine or in the

Integration Engine.

C In the outbound processing message validation is not possible


8/10/2019 C_tbit44_71 q and A

32/36

the pipeline.

Answer: B,D

Explanation:

QUESTION NO: 73

Which statements correctly describe asynchronous messages within a PI environment?


A. They are persisted on the Integration Server and can be re-sent from this location in case of

problems.

B. They are not persisted on the Integration Server unless logging is switched on.

C. They are processed with Quality of Service (QoS) Exactly Once (EO) or Exactly Once In Order

(EOIO).

D. They are processed in a different pipeline as synchronous messages.

E. They are queued for processing by the Integration Engine.

Answer: A,C,E

Explanation:

QUESTION NO: 74

A database error caused a system failure on the SAP NetWeaver PI server and stopped the

XBQIx queue.

Messages for which Quality of Service (QoS) will be affected by that?

A. Exactly Once In Order (EOIO)

B. Exactly Once (EO)

C. Best Effort (BE)

D. Acknowledgement (ACK)

Answer: A

Explanation:

QUESTION NO: 75


8/10/2019 C_tbit44_71 q and A

33/36

8/10/2019 C_tbit44_71 q and A

34/36

A. If necessary, the CPA Cache refresh can be initiated manually from transaction SXI_CACHE.

B. The CPA Cache can be modified online with the SAP NetWeaver Administrator.

C. In the CPA Cache, the object of type 'binding' corresponds to a communication channel in the

directory.

D. The CPA Cache can be administered using the transaction SXMB_ADM.

Answer: BExplanation:

QUESTION NO: 78

Performance monitoring is a component of both, the Runtime Workbench and the NWA.

Which statements describe the purpose of performance monitoring?


A. Performance monitoring is used to display statistical data on the performance of message

processing.

B. Performance monitoring collects the data from the Integration Server or the Process Monitoring

Infrastructure (PMI).

C. Performance monitoring can be used to control load balancing on the PI Server.D. Performance monitoring delivers individual detailed data for message processing performance.

Answer: A,B,D

Explanation:

QUESTION NO: 79

When messages are processed by the Advanced Adapter Engine, which concepts are correct with

regards to monitoring?


A. The messages are processed in the adapter engine with the same MSGUID as in the

Integration Server.

B. The status of the messages in the adapter engine can be monitored by drilling down into the

MSGUID from the transaction sxmb_moni.C. The detailed status of the messages can be monitored by looking at the audit log via the


8/10/2019 C_tbit44_71 q and A

35/36

D. The adapter engine and the integration engine share the same persistence layer.

E. The RFC adapter and SOAP adapter can be monitored directly in the Advanced Adapter

Engine.

Answer: A,C,E

Explanation:

QUESTION NO: 80

You are implementing a scenario where an ERP system is sending messages to PI via the RFC

adapter. But they do not arrive at the integration server.

What are the possible reasons?


A. The Program-ID specified in the Integration Directory does not exactly match the one specified

in the RFC destination of type TCP/IP on the sender side.

B. The application sends the message asynchronously but the 'COMMIT WORK' statement is

missing in the calling program.

C. On the Integration Server, the RFC destination pointing to the ERP system was not properly set

up for the metadata call back.D. The RFC metadata imported into the Integration Enterprise Services Repository is missing or

obsolete.

Answer: A,B


8/10/2019 C_tbit44_71 q and A

36/36

Thank you for trying our product.

Premium Packages:

Package Subscription Price

Bronze Saving Pack (All 3921 BeITCertified Exams) 3 Months $199

Silver Saving Pack (All 3921 BeITCertified Exams) 6 Months $249

Golden Saving Pack (All 3921 BeITCertified Exams) 1 Year $299

Diamond Saving Pack (All 3921 BeITCertified Exams) Life Time $399

To buy any of above packages; click on below url:

http://www.beitcertified.com/ordernow-50.htm

BeITCertified provides premium packages in which you can have access to all of

BeITCertified Exams in one price. Just pay once and get any exam of your choice

whenever you need. All the exams questions are available in most popular PDF formatthat are immediately available for download after payment. Its the best deal you ever find

so don't miss it.

BeITCertified Features:

Free demo of all exams allowing you to try before buy.

BeITCertified offers both printable PDF and a Self Test Software for practice. The

practice software is important if you have never taken a prometric or VUE exam

before.

Payment is accepted from world renowned secure servers PayPointand

PayPal.

BeITCertified offers a full refund if you fail your test after preparing all Q&A's.

Documents

C_tbit44_71 q and A