CT708E(G) & CT708EV(G) - neufert-cdn.archdaily.net · CT708E(G) & CT708EV(G) Wall-Mounted Flushometer Toilet, 1.28GPF when used with High Efﬁciency Flushometer Valve FEATURES •

CT708E(G) & CT708EV(G)Wall-Mounted Flushometer Toilet, 1.28GPF when used with

High Efficiency Flushometer ValveFEATURES

• Wall-mounted outlet• Elongated front bowl• Optional CeFiONtectTM ceramic glaze - prevents

debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning.

MODELS

• CT708E Commercial wall-mounted toilet with 1-1/2' top spud inlet, less seat

• CT708EG Commercial wall-mounted toilet with 1-1/2' top spud inlet, less seat with CeFiONtect ceramic glaze

• CT708EV Commercial wall-mounted toilet with 1-1/2' back spud inlet, less seat

• CT708EVG Commercial wall-mounted toilet with 1-1/2' back spud inlet, less seat with CeFiONtect ceramic glaze

• SC534 seat (sold separately)• SC134 seat (sold separately)• THU111 Retro-fit mounting bolt cap set (4 pcs sold

separately)

PRODUCT SPECIFICATION

The wall-mounted, low consumption siphon jet flushing system toilet shall be 1.28GPF/4.8LPF when paired with a 1.28GPF flushometer valve and 1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF flushometer valve. Toilet shall have optional CeFiONtect ceramic glaze. Toilet can be mounted at ADA height. Toilet shall be elongated front bowl. Toilet shall be TOTO Model CT708E______.

COLORS/FINISHES

• #01 Cotton #03 Bone #12 Sedona Beige

CODES/STANDARDS

• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifications: IAPMO (cUPC), State of Massachusetts,

City of Los Angeles, and others• Code compliance: UPC, IPC, NSPC, NPC Canada,

and others• ADA Compliant

FLUSHOMETER VALVES (sold separately)Manual EcoPower®

1.28 GPF 1.6 GPF 1.28 GPF 1.6 GPF

TMT1LN32#CP TMT1NNC-32 TET1LN32#CP TET1GNC-32#CP

TET6LN32#CP TET6GNC-32#CP

TET3LN31#SS TET3GN31#SS

TET2LN31#SS TET2GN31#SS

CT7

08E

CT7

08EV

CeFiONtect

SPECIFICATIONS

• Water Use 1.28GPF/4.8LPF (or 1.6GPF/6.0LPF when used with 1.6GPF flush valve)

• Flush System Siphon jet flushing action• Min. Water Pressure 35 psi (flowing)• Min. Flow Rate 23 GPM• Water Surface 12" x 9-1/4"• Trap Diameter 2-1/8"• Trap Seal 2-5/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT708E(G) - 49lbs

CT708EV(G) - 53.5lbs• Shipping Dimensions CT708E(G) 17-1/8"L x 16" W x 26"H

CT708EV(G) 15-1/2"L x 15-1/2" W x 26-3/8"H

CT708E(G) & CT708EV(G)Wall-Mounted Flushometer Toilet, 1.28GPF when used

with High Efficiency 1.28GPF Flushometer Valve

18-1/2" (470mm)

24-7/8" (632mm)

9"

(229mm)

15-3/4"* (400mm)

5-1/2"

(140mm)

*6-3/8"

(162mm)

11-1/4"

(285mm) 12-3/4"

(323mm)

3-1/2"

(90mm)

2-3/8" (59mm)

3-7/8"

(99mm)

7-1/2"

(190mm)

Finished Wall (Must be flat surface)

Finished Floor

*16"

(406mm)

*17"

(432mm)

*Suggested

Dimension

1/16"

(1.7mm)

Wall

Gap

18-1/2" (470mm)

24-7/8" (632mm)

9"(229mm)

5-1/2"(140mm)

*6-3/8"(162mm)

*16"(406mm)

Finished Wall (Must be flat surface)

Finished Floor

2-3/4"(70mm)

1/16"(1.7mm)

WallGap

15-3/8" (390mm)

12-3/4"(323mm)

*4-3/4"(121mm)

*SuggestedDimension

11-1/2"(292mm)

2-3/8"(59mm)

7-1/2"(190mm)

1" N.P.T. supply forFlushometer valve

1-1/2"(38mm)

*17"(432mm)

# SS-00210 v.09Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA

These dimensions and specifications are subject to change without notice

CT708E(G)

CT708EV(G)

1-3/4"(45mm)

Standardbolt cap

Wall

China China

Retrofitbolt cap

Wall

Note: If carrier bolt doesn’t extend/or is flush with china, then use retrofit caps THU111 (sold separately).

finished wall

Installation surface of bowl has 1/16” wall gapacross entire surface.

Top and Bottom mounting surfaces must be in the same vertical plane.

finished wall

Proper Installation Improper Installation

Ø Uneven Wall Gap

Baseboard

finished wall

Installation surface of bowl has 1/16” wall gapacross entire surface.

Top and Bottom mounting surfaces must be in the same vertical plane.

finished wall

Proper Installation Improper Installation

Ø Uneven Wall Gap

Baseboard

INSTALLATION NOTES

• Spuds are unique for TOTO product. For replacement spuds, contact TOTO for part number THU073R

CT705ELN(G)Flushometer ADA Toilet, 1.28GPF when used with

High Efficiency Flushometer ValveFEATURES

• Floor-mounted • ADA compliant• Elongated front bowl• Optional CeFiONtectTM ceramic glaze - prevents

debris, mold and bacteria from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning.

• 10"-12" rough-in

MODELS

• CT705ELNG Commercial ADA compliant, floor-mounted toilet with CeFiONtect ceramic glaze

• CT705ELN Commercial ADA compliant floor-mounted toilet


The floor-mounted, ADA compliant, low consumption siphon jet flushing toilet shall be 1.28GPF/4.8LPF when paired with a 1.28GPF flushometer valve and 1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF flushometer valve. Toilet shall be elongated front bowl and CeFiONtect ceramic glaze (CT705ELNG). Toilet shall be TOTO Model CT705ELN______.

COLORS/FINISHES

• Standard #01 Cotton #03 Bone (not available with CeFiONtect) #12 Sedona Beige (not available with CeFiONtect)

CODES/STANDARDS

• Meets and exceeds ASME A112.19.2/CSA B45.1, ASME A112.19.14,

• Certifications: IAPMO(cUPC), State of Massachusetts , City of Los Angeles, and others

• Code compliance: UPC, IPC, NSPC, NPC Canada, and others

• ADA compliant

ADDITIONAL ITEMS (sold separately)

• SC534 seat• SC134 seat

FLUSH VALVESEcoPower® Manual

TET1LN32#CP 1.28GPF TMT1LN32#CP 1.28GPF

TET1GNC-32 1.6GPF TMT1NNC-32 1.6GPF

TET6LN32#CP 1.28GPF

TET6GNC-32 1.6GPF

TET3LN32#SS 1.28GPF

TET3GN32#SS 1.6GPF

TET2GN32#SS 1.6GPF

TET2LN32#SS 1.28GPF

CeFiONtect

SPECIFICATIONS

• Water Use 1.28GPF/4.8LPF (or 1.6GPF/6.0LPF when used with 1.6GPF flush valve)

• Flush System Siphon jet flushing action• Min. Water Pressure 35 psi (flowing)• Min. Flow Rate 23 GPM• Water Surface 10-3/4" x 9-1/4"• Trap Diameter 1-7/8"• Rough-in 12", or 10"• Trap Seal 2-3/8"• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight CT705ELN(G) - 56.5lbs • Shipping Dimensions CT705ELN(G) 26-1/2"L x 9-1/2" W1 x 16-

1/4"W2 x 19-1/2"H

CT705ELN(G)Flushometer ADA Toilet, 1.28GPF when used

with High Efficiency 1.28GPF Flushometer Valve)

18-1/2" (470mm)

25-1/4" (642mm)

with 10" rough-in with 12" rough-in

26-1/8" (663mm)

9"(230mm)

3" (76mm)

14-3/8" (365mm)

5-1/2"(140mm)

17-1/2" (445mm)

14-3/8" (365mm)

*4-3/4" (121mm)

29"* (737mm)

1" I.P.S

1-1/2" I.P.S

10"(254mm)

18-1/2" (470mm)

25-1/4" (642mm)

28-1/8" (714mm)

5"(127mm)

5-1/2"(140mm)

17-1/2" (445mm)

14-3/8" (365mm)

1-1/2" I.P.S

12"(305mm)

18-1/2" (470mm)

25-1/4" (642mm)


26-1/8" (663mm)

9"(230mm)

3" (76mm)

14-3/8" (365mm)

5-1/2"(140mm)

17-1/2" (445mm)

14-3/8" (365mm)

*4-3/4" (121mm)

29"* (737mm)

1" I.P.S

1-1/2" I.P.S

10"(254mm)

18-1/2" (470mm)

25-1/4" (642mm)

28-1/8" (714mm)

5"(127mm)

5-1/2"(140mm)

17-1/2" (445mm)

14-3/8" (365mm)

1-1/2" I.P.S

12"(305mm)

18-1/2" (470mm)

25-1/4" (642mm)


26-1/8" (663mm)

9"(230mm)

3" (76mm)

14-3/8" (365mm)

5-1/2"(140mm)

17-1/2" (445mm)

14-3/8" (365mm)

*4-3/4" (121mm)

29"* (737mm)

1" I.P.S

1-1/2" I.P.S

10"(254mm)

18-1/2" (470mm)

25-1/4" (642mm)

28-1/8" (714mm)

5"(127mm)

5-1/2"(140mm)

17-1/2" (445mm)

14-3/8" (365mm)

1-1/2" I.P.S

12"(305mm)


INSTALLATION NOTES


• Spuds are unique for TOTO product. For replacement spuds, contact TOTO for part number THU073R

UT104E(V)0.5GPF Low Consumption Washout Urinal

FEATURES

• 0.5GPF• Compact urinal with concealed integral trap• Washout flush action with 3/4" top or back spud

inlet

MODELS

• UT104E Urinal with 3/4" top spud inlet

• UT104EV Urinal with 3/4" back spud inlet


The wall-mounted, ADA compliant, low consumption washout urinal shall be 0.5GPF/1.9LPF when paired with a 0.5GPF flushometer valve and 1.0GPF/3.8LPF when paired with 1.0GPF/3.8LPF flushometer valve. Urinal specified shall be model UT104E________.

COLORS/FINISHES

• Standard #01 Cotton #03 Bone #12 Sedona Beige

CODES/STANDARDS

• Meets and exceeds ASME A112.19.2/CSA B45.1, • Certifications: IAPMO(cUPC), State of

Massachusetts , City of Los Angeles• Code compliance: UPC, IPC, NSPC, NPC Canada,

and others• Legislative compliance: California AB715, California

Green Building Code• ADA compliant

• THU3010 Stainless Steel Urinal Drain Cover


RECOMMENDED FLUSH VALVESUT104E UT104EV

EcoPower® Manual EcoPower®

TEU1LN12#CP TMU1LN12#CP TEU2LN11#SS

TEU3LN11#SS UT104E UT104EV

SPECIFICATIONS

• Water Use 0.5GPF/1.9LPF • Flush System Washout flush action• Warranty One Year Limited Warranty• Material Vitreous china• Min. Water Pressure 15 psi (flowing)• Height (Urinal Only) 21-3/4"• Width 13"• Rim 14"• Shipping Weight UT104E(V) - 34.5lbs • Shipping Dimensions UT104E(V) 24" L x 13-3/4" W x 15-1/8" H

UT104E(V)0.5GPF Low Consumption Washout Urinal

2-1/2"

(61mm)

3/4"

(19mm)

Spud

12-3/8"

(315mm)

10-3/4"

(273mm)

4-1/2"

(114mm)

**17"

(432mm)

ADA

24"

(610mm)

**Recommended for ADA height installation for 17” floor to rim.

2"

(51mm)

I.P.

Inside

Threads4-1/4"

(108mm)

4-1/4"

(108mm)

3/4" (19mm) I.P.S. Supply for

Flushometer Valve

4-3/4"

(121mm)

13"

(330mm)

9-7/8"

(250mm)

21-3/4"

(552mm)

11-1/2"

(292mm)

OR

1-1/2"

(40mm)

3/4" (19mm)

Spud

2"

(51mm)

I.P.

Inside

Threads4-1/4"

(108mm)

4-1/4"

(108mm)

10-3/4"

(273mm)

12-3/8"

(315mm)

21-3/4"

(552mm)

13"

(330mm)

9-7/8"

(250mm)

**Recommended for ADA height installation for 17” floor to rim.

24"

(610mm)

**17"

(432mm)

ADA

4-1/2"

(114mm)

OR

Finished Wall

Outlet

Outlet Detail

GasketFinished Floor

C/L

Gasket

Outlet Detail

Outlet

Finished Wall

Finished Floor

C/L

UT104E UT104EV

14"

(356mm) 14"

(356mm)



INSTALLATION NOTES

Adjust angle stop accordingly to prevent overflow.Confirm with local codes and standards for floor drain requirement.

UE930Lloyd® Urinal

FEATURES

• Compact urinal with concealed integral trap• Washout flush action• Top spud inlet• Can be mounted at ADA compliant height

MODELS

• UE930#01 Lloyd urinal and electronic flush valve

COMPONENTS

• UT930 Lloyd urinal only

• TEY1DNC-42 Lloyd electronic flush valve only, 1.0GPF or less


Urinal shall be made of vitreous china. The wall-mounted, ADA compliant, washout urinal shall be 1.0GPF or less when paired with TEY1DNC-42 flushometer valve. Urinal specified shall be model UE930________.

COLORS/FINISHES

• Standard #01 Cotton

CODES/STANDARDS



and others• ADA compliant

SPECIFICATIONS

• Water Use 0.5GPF - 1.0GPF • Flush System Spreader nozzle• Warranty One Year Limited Warranty• Material Vitreous china• Min. Water Pressure 15 psi (flowing)• Height (Urinal Only) 29-1/4"• Width 16-1/2"• Rim 14"• Shipping Weight UE930 - 57.3lbs • Shipping Dimensions UE930 30-5/16" L x 15-1/8"

W x 17-3/4" H

UE930Lloyd® Urinal

*Suggested Dimensions

5-1/8"(131mm)

42"(1068mm)

14" (356mm)

6" (152mm )

Outlet Detail

19-1/2"(495mm)

Outlet 2"(51mm)

I.P.S

4-3/4"(120mm) 24"

(610mm)

1" (25mm)

4-1/4" (108mm)2-1/2" (63mm)

37-3/4"(960mm)

11"(280mm)

6-1/2"(165mm)

29-1/4"(744mm)

16-3/8"(415mm)

6"(150mm)

19-1/2"(495mm)

6" (152mm)

16-1/2" (420mm)

10-1/8" (258mm)

9-1/2" (246mm)

5/8" Spud(16mm)

*Suggested Dimensions

5-1/8"(131mm)

42"(1068mm)

14" (356mm)

6" (152mm )

Outlet Detail

19-1/2"(495mm)

Outlet 2"(51mm)

I.P.S

4-3/4"(120mm) 24"

(610mm)

1" (25mm)

4-1/4" (108mm)2-1/2" (63mm)

37-3/4"(960mm)

11"(280mm)

6-1/2"(165mm)

29-1/4"(744mm)

16-3/8"(415mm)

6"(150mm)

19-1/2"(495mm)

6" (152mm)

16-1/2" (420mm)

10-1/8" (258mm)

9-1/2" (246mm)

5/8" Spud(16mm)



INSTALLATION NOTES

Recommended Carrier:Jay R. Smith 0636 (Wall Hanger)0637 (Wall Hanger with bottom)

UT105U(V)(G)High-Efficiency 1/8 GPF Washout Urinal

FEATURES

• Compact urinal with concealed integral trap• Washout flush action with 3/4" top or back spud

inlet• Complete with low profile dome strainer• Optional CeFiONtect™ ceramic glaze - CeFiONtect

glaze prevents debris and mold from sticking to ceramic surfaces, leading to fewer chemicals.

MODELS

• UT105U Urinal with 3/4" top spud inlet

• UT105UG Urinal with 3/4" top spud inlet and CeFiONtect

• UT105UV Urinal with 3/4" back spud inlet

• UT105UVG Urinal with 3/4" back spud inlet and CeFiONtect


The wall-mounted, ADA compliant, high-efficiency washout urinal shall be 0.125GPF/0.47LPF when paired with a 0.125GPF flushometer valve. Urinal shall have optional CeFiONtect ceramic glaze. Urinal specified shall be model UT105U___.

COLORS/FINISHES

• #01 Cotton (CeFiONtect optional) #03 Bone (special order only) #12 Sedona Beige (special order only)

CODES/STANDARDS



and others• Legislative Compliance: California AB715, CALGreen Title 24, California Energy Commission Standards• ADA compliant

RECOMMENDED FLUSH VALVESUT105U(G) UT105UV(G)TEU1UN12#CP TEU2UN11#SS

TEU3UN11#SS

MEETS CALIFORNIAWATER SAVING

REGULATIONS

Dual-Max

CeFiONtect

SPECIFICATIONS

• Water Use 0.125GPF/0.47LPF • Flush System Washout flush action• Warranty One Year Limited Warranty• Material Vitreous china• Min. Water Pressure 15 psi (flowing)• Height (Urinal Only) 21-3/4"• Width 12-1/4"• Rim 14"• Shipping Weight UT105U(V)(G) - 37.5lbs • Shipping Dimensions UT105U(V)(G) 24" L x 13-3/4" W x 17" H

UT105U(V)(G)High-Efficiency 1/8 GPF Washout Urinal

2010ADA605.2



INSTALLATION NOTES

Install this product according to the installation guide.

Refer to manufacturer’s instructions and local codes forflushometer requirements.

Will comply with ADA when installed per Section 605 - Urinals of the ADA 2010 Accessible Design Standard with maximum rim height of 17” and minimum depth of 13-1/2”.

Will comply with CSA B651 when installed per Clause 6.2.8 Urinals of the CSA 2012 Accessible Design Standard with maximum rim height of 17” and minimum depth of 13-1/2”.

Ultra-low high efficiency urinals require a system with a minimum 2% slope. Maximum drainage capacity rated at 6.6 gal/min (25 L/min). Adjust angle stop accordingly to prevent overflow. Confirm with local codes and standards for floor drain requirement.

UT445U(V)0.125GPF High-Efficiency Washout Urinal

FEATURES

• Full size urinal with concealed integral trap• Washout flush action with 3/4" top or back spud inlet• 0.125 GPF with any TOTO flush valve shown below• Complete with low profile dome strainer

MODELS• UT445U

Urinal with 3/4" top spud inlet

• UT445UV Urinal with 3/4" back spud inlet


The wall-mounted, ADA compliant, high-efficiency washout urinal shall be 0.125GPF/0.473LPF when paired with a TOTO 0.125GPF flushometer valve. Urinal specified shall be TOTO Model UT445U__.

Flush valve specified shall be TOTO Model ________________________.

COLORS/FINISHES

• #01 Cotton

CODES/STANDARDS



and others• Legislative Compliance: California AB715, CALGreen Title 24, California Energy Commission Standards• ADA compliant


UT445U Shown with TEU1UN12

UT445UV Shown with TEU2UN11

RECOMMENDED FLUSH VALVES

UT445U UT445UV

EcoPower® Flush Valve EcoPower®

TEU1UN12#CP TEU2UN11#SS - 14"x 12"

TEU3UN11#SS - 4" x 4"

MEETS CALIFORNIAWATER SAVING

REGULATIONS

SPECIFICATIONS INSTALLATION NOTES

• Water Use 0.125GPF/0.473LPF • Flush System Washout flush action• Warranty One Year Limited Warranty• Material Vitreous china• Min. Water Pressure 15 psi (flowing)• Height (Urinal Only) 26"• Width 17-3/4"• Rim 14-1/4"• Shipping Weight UT445U(V) - 60lbs • Shipping Dimensions UT445U(V) 29" L x 18" W x 16" H

UT445U(V)0.125GPF High-Efficiency Washout Urinal



UT445U UT445UV

Ultra-low high efficiency urinals require a system with a minimum 2% slope. Maximum drainage capacity rated at 6.6 gal/min (25 L/min). Adjust angle stop accordingly to prevent overflow. Confirm with local codes and standards for floor drain requirement.

TEU1GNC SeriesEcoPower® Urinal Flushometer Valve, 1.0 gpf

FEATURES• Hydropower self-generating system• Electronic fl ushometer valve, neutral rough-in,

complete with 3/4” angle stop and 1-1/4” or 3/4" vacuum breaker set

• 1.0 gpf or less• Manual override button• 24 hour automatic fl ush for trap seal protection

COLORS/FINISHES

MODELS

CODES/STANDARDS


• #CP Polished Chrome

TEU1GNC Valve only, Left and right rough, Polished Chrome fi nish

TEU1GNC-12 (3/4" Vacuum breaker) Left and right rough, Polished Chrome fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-12 • 3/4" Angle stop - 10077t4 • 3/4" Vacuum breaker - 10075t2 • Spud nut & escutcheon - 71051Nt5 • Sweat solder kit - TH559EDVSJ1

TEU1GNC-22 (1-1/4" Vacuum breaker) Left and right rough, Polished Chrome fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-22 • 3/4" Angle stop - 10077t4 • 1-1/4" Vacuum breaker - 10075t5 • Spud nut & escutcheon - 71051Nt5 • Sweat solder kit - TH559EDVSJ1

Optional Part: Z-4000-J - Adapter for ground joint angle stops

• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of

Massachusetts, City of Los Angeles, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,


TOTO® Model No. _____________________________Automatic infrared sensor activated, urinal fl ush valve. Heavy-duty zinc die cast cover with polished chrome fi nish. Vandal resistant hex head screws. Low water consumption of 1.0 gallon per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic fl ush every twenty four hours if not used. Angle stop and vacuum breakerincluded with accessories. Through the use of TOTO’sEcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.

Piston Valve

*Check local codes

L

Max 19-11/16"(Max 500mm)

Max 31-1/2"(Max 800mm)

15

4-3/4 1/2"(120 13mm)

3/4"inlet supply

11-1/2"(292mm)1-1/2"

NPSM

Min.2-1/4"(57mm)

3/4"NPT

TEU1GNC SeriesEcoPower® Urinal Flushometer Valve, 1.0 gpf

# SS-00057, v.02Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻

Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com These dimensions and specifi cations are subject to change without notice

SPECIFICATIONS

These specifi cations are subject to change without notice.*Water pressures over 80 psi are not recommended for most plumbing fi xtures.Check your local plumbing code for details.

• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.0 gpf / 3.8 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once

after twenty-four (24) hours of non-use

NOTESTOTO’s 1.0 gpf EcoPower fl ush valves use “Fuzzy Logic” technology to offer further water conserva-tion. The fl ush valve’s microprocessor measures the duration and frequency of use, then calculates the appropriate average volume per fl ush. In facilities with frequent use, the fl ush valve issues less water per fl ush with a full fl ush occurring every 5 uses. In facilities with infrequent use, the valve delivers the full fl ush every time.

TET1GNC SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf

FEATURES• Hydropower self-generating system• Electronic fl ushometer valve, neutral rough-in,

complete with 1” angle stop and 1-1/2” vacuum breaker set

• 1.6 gpf or less• Manual override button• 24 hour automatic fl ush for trap seal protection

COLORS/FINISHES

MODELS

CODES/STANDARDS

PRODUCT SPECIFICATION• #CP Polished Chrome

TET1GNC Valve only, Left and right rough, Polished Chrome fi nish

TET1GNC-32 (1-1/2" Vacuum breaker) Left and right rough, Polished Chrome fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker - 10075t1 • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3





TOTO® Model No. _____________________________Automatic infrared sensor activated, toilet fl ush valve. Heavy-duty zinc die cast cover with polished chrome fi nish. Vandal resistant hex head screws. Low water consumption of 1.6 gallons per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic fl ush every twenty four hours if not used. Angle stop and vacuum breakerincluded with accessories. Through the use of TOTO’s®

EcoPower Flush Valves™, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.

Piston Valve

4-3/4" 1/2"(120 13mm)

Min.2-1/4"(57mm)

1"NPT

11-1/2"(292mm)

**Check local codes

L

Max19-11/16"(Max 500 mm)

Max31-1/2"(Max 800 mm)

15

TET1GNC SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf

# SS-00085, v.04Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻

Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com

These dimensions and specifi cations are subject to change without notice

SPECIFICATIONS


• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Power Supply Hydropower self-generating

system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.6 gpf / 6.0 lpf• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once

after twenty-four (24) hours of non-use

INSTALLATION NOTES*Alternate ADA InstallationMount grab bar at the 36” (914mm) maximum allowed height or use the split grab bars.

1/8 GPF Urinal EcoPower® Flushometer Valve

FEATURES

• Electronic fl ushometer valve, neutral rough-in, complete with 3/4” angle stop and 3/4" vacuum breaker set

• Hydropower self-generating system• 1/8 GPF or less• Manual override button• 12 hour automatic fl ush for trap seal protection

COLORS/FINISHES

MODELS

CODES/STANDARDS (to be listed)PRODUCT SPECIFICATION

• #CP Chrome

• TEU1UN#CP Valve only, Left and right rough, Chrome plated fi nish

• TEU1UN12#CP (3/4" Vacuum breaker) Left and right rough, Polished Chrome fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-12 • 3/4" Angle stop - 10077t4 • 3/4" Vacuum breaker - 10075t2 • Spud nut & escutcheon - 71051Nt5 • Sweat solder kit - TH559EDVSJ1

• Optional Part: Z-4000-J - Adapter for ground joint angle stops


Massachusetts, and others• Code Compliance: UPC, IPC, NSPC, NPC Canada,

California AB715, California Green Building Code and others

• ADA compliant

TOTO® Model No. _____________________________Automatic infrared sensor activated, urinal fl ush valve. Heavy-duty zinc die cast cover with nickel chrome fi nish. Vandal resistant hex head screws. Automatic sensor adjustment on installation. Manual override button incorporated. Solenoid with self-cleaning mechanism. Automatic fl ush every twelve hours if not used. Angle stop and vacuum breakerincluded with accessories.

TEU1UN Series

L

Max19-11/16"

(Max 500 mm)

Max31-1/2"

(Max 800 mm)

15

TEU1UN Series1/8 GPF Urinal EcoPower® Flushometer Valve

# SS-00484, v.01Printed in U.S.A. | © TOTO USA 10/11 | Printed on recycled paper ƛ



SPECIFICATIONS


• Warranty Three Year Warranty• Material Bronze casting• Power Supply Hydro-Power Charge• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1/8 gpf / 0.47 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once

after twelve (12) hours of non-use

*Check local codes

4-3/4 1/2"

(120 13mm)3/4"inlet supply

11-1/2"(292mm)1-1/2"

NPSM

Min.2-1/4"(57mm)

3/4"NPT

TET2GN SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf

FEATURES• Hydropower self-generating system• Electronic fl ushometer valve complete with 1"

angle stop and 1-1/2" vacuum breaker set• 1.6 gpf or less• Back spud fl oor, top spud and back spud wall

models - concealed 14" x 12" Cover plate• 24 hour automatic fl ush for trap seal protection

COLORS/FINISHES

MODELS

CODES/STANDARDS


• #SS Stainless Steel Satin fi nish

TET2GN#SS Valve only, Surface mount, Satin fi nish

TET2GN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV176 • Sweat solder kit - SJ3

TET2GN32#SS (1-1/2" Vacuum breaker) Top spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t3 • Outlet tube - TH559EDV177 • Sweat solder kit - SJ3

TET2GN33#SS (1-1/2" Vacuum breaker) Back spud fl oor, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud fl oor) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV175 • Sweat solder kit - SJ3





TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 14” x 12” cover plate with stainless steel satin fi nish and vandal resistant mounting screws. Low water consumption of 1.6 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual override button incorporated. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.

Piston Valve

• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.6 gpf / 6.0 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once

after twenty four (24) hours of non-use

TET2GN SeriesEcoPower® Toilet Flushometer Valve, 1.6 gpf

#SS-00089, v.06Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻



SPECIFICATIONS


INSTALLATION NOTES

The recommended installation for the toilet fl ush valve is to have a 7" (178mm) minimum space in wall. Do not place grab bars in front of sensor for ADA stalls. See diagram below for detailed measurements.

Top Spud Back Spud Floor Mount Back Spud Wall Mount

* +/- 1/2”

14-3/4”

of frameand fixture

Dimensions: Inch (not to be scaled)

fixture

NOITALLATSNI DEDNEMMOCERMARGAIDTET2GN31#SSTET2GN32#SS TET2GN33#SS

Always position the sensor above upright toilet seats and grab bars = At least 5” clearance from sensor to tip of toilet seat up

position or to top of grab bar is required to avoid false detection.

*Leave some room for elbow nut from the wall for future maintenance.

11-1

5/16

”

5-1/

8”

3-13

/16”

Opening in wall

Ope

ning

in w

all

of sensor

13-1/2”

4-3/4”*

OV

ER

RID

EB

UTT

ON

LOC

ATI

ON

LOC

ATI

ON

SE

NS

OR

SupplyFinished Wall Finished Wall Finished Wall

High-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf

FEATURES

• Hydropower self-generating system• Electronic fl ushometer valve complete with 3/4"

angle stop and 1-1/4" or 3/4" vacuum breaker set• 0.5 gpf or less• Back spud - concealed 14"x 12" Cover plate• 12 hour automatic fl ush for trap seal protection

COLORS/FINISHES

MODELS

CODES/STANDARDS



TEU2LN#SS Valve only, Surface mount, Satin fi nish

TEU2LN11#SS (3/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 • 3/4" Angle stop - 10077t6 • 3/4" Vacuum breaker - 10075t6 • Outlet tube - TH559EDV171 • Sweat solder kit - SJ1

TEU2LN21#SS (1-1/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 • 3/4" Angle stop - 10077t6 • 1-1/4" Vacuum breaker - 10075t7 • Outlet tube - TH559EDV172 • Sweat solder kit - SJ1





TOTO® Model No. _____________________________Automatic infrared sensor activated, urinal fl ush valve. Heavy-duty 14"x12" stainless steel coverplate with satin fi nish. Vandal resistant hex head screws. Lower water consumption of 0.5 gallon per fl ush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve with stainless steel self cleaning debris screen and solenoid with self cleaning mechanism. Automatic fl ush every twelve hours if not used. Angle stop and vacuum breaker included with accessories. Electrical sensor separated from valve and sealed in waterproof compartment. Through the use of TOTO's EcoPower® Flush Valves, using the valve 30 fl ushes per day will fully recharge the valve for up to 10 years.

Piston Valve

TEU2LN Series

Dimensions: Inch

Urinal Urinal

Finished wall

Supply Supply

16”

2-3/8” 2-3/8”

3-3/4”3-3/4”

16”

Back Spud 1-1/4” Back Spud 3/4”

Solder joint

Finished wall

OVE

RR

IDE

BUTT

ON

LOC

ATIO

NSE

NSO

RLO

CAT

ION

Back spud (ø1-5/16”)

13-1/2”

4-3/4”*

Opening in wall

of Supplyand sensor

(distance from Spud Hole to bothof Supply and Sensor)

Ope

ning

in w

all

Top of the Urinal

11-1

5/16

”

5-1/

8”

3-13

/16”

*+/- 1/2”

16”

TEU2LN SeriesHigh-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf




SPECIFICATIONS


• Warranty Three Year Warranty• Material Bronze casting with stainless steel fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 0.5 gpf / 2.4 lpf• Urinal type Low consumption wash down

and jetted fl ush design urinals• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once


INSTALLATION NOTES

The recommended installation for the urinal fl ushometer valve is to have a 7" (178mm) minimum space in wall.

DIAGRAM RECOMMENDED INSTALLATION

High-Effi ciency Toilet EcoPower® Flushometer Valve, 1.28 gpfFEATURES• Hydropower self-generating system• Electronic fl ushometer valve complete with 1" angle stop and 1-1/2" vacuum breaker set• 1.28 gpf or less• Back spud fl oor, top spud and back spud wall

models - concealed 4" x 4" Cover plate• 24 hour automatic fl ush for trap seal protection

COLORS/FINISHES

MODELS

CODES/STANDARDS



TET3LN#SS Valve only, Surface mount, Satin fi nish

TET3LN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV176 • Sweat solder kit - SJ3

TET3LN32#SS (1-1/2" Vacuum breaker) Top spud, Satin fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t3 • Outlet tube - TH559EDV177 • Sweat solder kit - SJ3

TET3LN33#SS (1-1/2" Vacuum breaker) Back spud fl oor, Satin fi nish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud fl oor) • 1" Angle stop - 10077t5 • 1-1/2" Vacuum breaker - 10075t4 • Outlet tube - TH559EDV175 • Sweat solder kit - SJ3





TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 4” x 4” stainless steel coverplate with satin fi nish. Low water consumption of 1.28 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual override button incorporated. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 12 fl ushes per day will fully recharge the valve for up to 10 years.

Piston Valve

TET3LN Series

x xx

TOTOEcoPower®SupplySupplySupply

16”16”11”

ofsensor

ofsensor

ofsensor

5”3”

frame

(3-3/4"- 4-7/8") *

2-1/4” Min.

6 - 7-1/8”

2-3/8” 2-3/8” 2-3/8”

(3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") *

ElbowNut

Dimensions: Inch

OVE

RR

IDE

BUTT

ON

LOC

ATIO

N

LOC

ATIO

NSE

NSO

R

Opening in Wall: Top SpudFinished wall Finished wall Finished wall

Bowl

BowlBowl

Back Spud Floor Mount Back Spud Wall Mount

4-3/4”

4-3/4”*

4-3/4”*

3-15/16” x 3-15/16”

3-3/

8”

1-3/

4”

of frameand fixture

Supply

* +/- 1/2”

TET3LN SeriesHigh-Effi ciency Toilet EcoPower® Flushometer Valve, 1.28 gpf




SPECIFICATIONS


• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 1" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1.28 gpf / 4.8 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 35 psi (fl owing) - 125 psi* (minimum fl ow rate of 23 gpm)• Trap seal protection Automatically fl ushes once

after twenty four (24) hours of non-use

INSTALLATION NOTES

The recommended installation for the toilet fl ushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12” x 12” access panel or walk-in chase is required for service and maintenance.

Do not place grab bars in front of sensor for ADA stalls. See diagram below for detailed measurements.

Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm).Contact TOTO for different thickness.


Always position the sensor above upright toilet seats and grab barsX= At least 5” clearance from sensor to tip of toilet seat upposition or to top of grab bar is required to avoid false detection.

Depending on X, the frame may not be centered to Supply C as shown.*Leave some room for elbow nut from the wall for future maintenance.

L

TET3LN-31#SSTET3LN-32#SS TET3LN-33#SS

High-Effi ciency Urinal EcoPower® Flushometer Valve, 1/8 gpf

FEATURES• EcoPower® hydropower self-generating system• Electronic fl ushometer valve complete with 3/4"

angle stop and 3/4" vacuum breaker set• 1/8 gpf or less• Back spud - concealed 4" x 4" Cover plate• 12 hour automatic fl ush for trap seal protection


COLORS/FINISHES• #SS Stainless Steel

MODELS• TEU3UN#SS Valve only, Surface mount, Satin fi nish

• TEU3UN11#SS (3/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 • 3/4" Angle stop - 10077t6 • 3/4" Vacuum breaker - 10075t6 • Outlet tube - TH559EDV171 • Sweat solder kit - SJ1

• Optional Part: Z-4000-J - Adapter for ground joint angle stops

CODES/STANDARDS (to be listed)• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of


and others• Legislative Compliance: California AB715,

California Green Building Code and others• ADA compliant

TOTO® Model No. _____________________________Automatic Infrared sensor activated, urinal valve. 4” x 4” cover plate with brushed stainless steel fi nish. Low water consumption of 1/8 gallons per fl ush. Stainless steel self-cleaning debris screen and self-cleaning solenoid. Electrical sensor separated from valve and sealed in a waterproof compartment. manual override button incorporated. Automatic fl ush every twelve hours if not used. Angle stop and vacuum breaker included with accessories.

TEU3UN

TOTOEcoPower®

OVE

RRID

E BU

TTO

NLO

CATI

ON

LOCA

TIO

NSE

NSO

R

16"

Urinal

Frame

Supply2-3/8”

3-3/4”

16”

Back Spud 3/4”

Solder joint

Finished wall

Back spud (ø1-5/16”)*+/- 1/2”

Dimensions: Inch

Top of the Urinal

Location of the Left watersupply pipe 3/4” NPT

Location of the Right water supply

pipe 3/4” NPT

4-3/4”

3-15/16”

3-15/16”

4-3/4”* 4-3/4”*

Opening in Wall:3-15/16” x 3-15/16”

4-3/4”

3-3/

8”

1-3/

4”

of Supplyand sensor


TEU3UNHigh-Effi ciency Urinal EcoPower® Flushometer Valve, 1/8 gpf




SPECIFICATIONS


• Warranty Three Year Warranty• Material Bronze casting• Power Supply Hydro-Power Charge• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 1/8 gpf / 0.47 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once


INSTALLATION NOTES

The recommended installation for the urinal fl ushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12” x 12” access panel or walk-in chase is required for service and maintenance.


High-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf

FEATURES• Hydropower self-generating system• Electronic fl ushometer valve complete with 3/4"

angle stop and 1-1/4" or 3/4" vacuum breaker set• 0.5 gpf or less• Back spud - concealed 4" x 4" Cover plate• 12 hour automatic fl ush for trap seal protection

COLORS/FINISHES

MODELS

CODES/STANDARDS



TEU3LN#SS Valve only, Surface mount, Satin fi nish

TEU3LN11#SS (3/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 • 3/4" Angle stop - 10077t6 • 3/4" Vacuum breaker - 10075t6 • Outlet tube - TH559EDV171 • Sweat solder kit - SJ1

TEU3LN21#SS (1-1/4" Vacuum breaker) Back spud, Satin fi nish• Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 • 3/4" Angle stop - 10077t6 • 1-1/4" Vacuum breaker - 10075t7 • Outlet tube - TH559EDV172 • Sweat solder kit - SJ1





TOTO® Model No. _____________________________Automatic Infrared sensor activated, toilet valve. Heavy-duty 4” x 4” stainless steel coverplate with satin fi nish. Low water consumption of 0.5 gallons per fl ush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic fl ush every twelve hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. manual override button incorporated. Through the use of TOTO’s EcoPower® Flush Valves, using the valve 30 fl ushes per day will fully recharge the valve for up to 10 years.

Piston Valve

TEU3LN Series

TOTOEcoPower®

OVE

RRID

E BU

TTO

NLO

CATI

ON

LOCA

TIO

NSE

NSO

R

16"

Urinal

Frame

SupplySupply2-3/8”

3-3/4”

16”

Urinal

3-3/4”

16”

Back Spud 1-1/4” Back Spud 3/4”

Solder joint

Finished wall2-3/8”

Finished wall

Back spud (ø1-5/16”)*+/- 1/2”

Dimensions: Inch

Top of the Urinal

Location of the Left watersupply pipe 3/4” NPT

Location of the Right water supply

pipe 3/4” NPT

4-3/4”

3-15/16”

3-15/16”

4-3/4”* 4-3/4”*

Opening in Wall:3-15/16” x 3-15/16”

4-3/4”

3-3/

8”

1-3/

4”

of Supplyand sensor


TEU3LN SeriesHigh-Effi ciency Urinal EcoPower® Flushometer Valve, 0.5 gpf




SPECIFICATIONS


• Warranty Three Year Warranty• Material Bronze casting with stainless steel satin fi nish• Power Supply Hydropower self-generating system• Water Supply 3/4" NPT• Detection time Factory setting at six (6) seconds minimum• Detection range Self-adjusting to environment• Discharge quantity Preset to 0.5 gpf / 2.4 lpf• Operating temperature 32°-104°F (0°-40°C)• Supply water pressure 15 psi - 125 psi*• Trap seal protection Automatically fl ushes once


INSTALLATION NOTES

The recommended installation for the urinal fl ushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12” x 12” access panel or walk-in chase is required for service and maintenance.

Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm). Contact TOTO for different thickness.


TMT1NNC SeriesNon-Hold Open Toilet Flushometer Valve - 1.6 gpf

FEATURES• Manual operated, non-hold open, toilet

fl ushometer valve complete with 1” angle stop and 1-1/2” vacuum breaker set

• Piston valve action with 1.6 gpf• Left/right rough-in

COLORS/FINISHES

MODELS



• TMT1NNC Valve only, Right/Left hand rough

• TMT1NNC-32 (1-1/2" Vacuum breaker) Right/Left hand rough• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker - 10075t1 • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3

• Optional Parts: Z-4000-J - Adapter for ground joint angle stops 10075T1L - 24" Long 1-1/2" vacuum breaker tube

TOTO® Model No. _____________________________Manual toilet fl ushometer valve, non-hold-open piston type with self-cleaning debris screen and precise fl ushing capability. Low consumption 1.6 gpf models available. Polished Chrome exterior, angle stop with back-check and vacuum breaker included.

CODES/STANDARDS• Meets or exceeds ASSE 1037, CSA B125.3• Certifi cations: IAPMO(cUPC), ASSE, State of



11-1/2”

1” Inlet supply

1-1/2” NPSM4-3/4”*

MINIMUM2-1/4”

*Adjustable to 1/2” from standard





SPECIFICATIONS


• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Water Supply 1" NPT• Fixture type Flushometer valve bowl 1.6 gpf / 6.0 lpf• Supply water pressure 15 psi - 100 psi*

Non-Hold Open Urinal Flushometer Valve - 1.0 gpf

FEATURES• Manual operated, non-hold open, urinal

fl ushometer valve complete with 3/4” angle stop and 3/4” or 1-1/4"vacuum breaker set


COLORS/FINISHES

MODELS



TMU1NNC Valve only, Right/Left Hand Rough

TMU1NNC-12 (3/4" Vacuum breaker) Right/Left Hand Rough• Complete set supplied with: Vacuum breaker & angle stop set – VB9CP-12 • 3/4” Angle stop – 10077t4 • 3/4” Vacuum breaker – 10075t2 • Spud nut & escutcheon – 71051Nt5 • Sweat solder kit – TH559EDVSJ1

TMU1NNC-22 (1-1/4" Vacuum breaker) Right/Left Hand Rough• Complete set supplied with: Vacuum breaker & angle stop set – VB9CP-22 • 3/4” Angle stop – 10077t4 • 1-1/4” Vacuum breaker – 10075t5 • Spud nut & escutcheon – 71051Nt7 • Sweat solder kit – TH559EDVSJ1


TOTO® Model No. _____________________________Manual type urinal fl ushometer valve, non-hold-open piston type with, self-cleaning debris screen and precise fl ushing capability. Low consumption 1.0 lpf/3.8 lpf model. Accessories to include angle stop with check valve, vacuum breaker. Sweat solder kit, spud nut and escutcheon.




TMU1NNC Series

11-1/2”

4-3/4”*

MINIMUM2-1/4”


1-1/2” NPSM

3/4” Inlet supply

TMU1NNC SeriesNon-Hold Open Urinal Flushometer Valve - 1.0 gpf




SPECIFICATIONS


• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Water Supply 3/4" NPT• Fixture type Low consumption urinal 1.0 gpf / 3.8 lpf fl ushometer type• Supply water pressure 15 psi - 100 psi*


FEATURES• Manual operated, non-hold open, toilet

fl ushometer valve complete with 1” angle stop and 1-1/2” vacuum breaker set


COLORS/FINISHES

MODELS



• TMT1NNC Valve only, Right/Left hand rough

• TMT1NNC-32 (1-1/2" Vacuum breaker) Right/Left hand rough• Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 • 1" Angle stop - 10077t3 • 1-1/2" Vacuum breaker - 10075t1 • Spud nut & escutcheon - 71051Nt6 • Sweat solder kit - TH559EDVSJ3

• Optional Parts: Z-4000-J - Adapter for ground joint angle stops 10075T1L - 24" Long 1-1/2" vacuum breaker tube

TOTO® Model No. _____________________________Manual toilet fl ushometer valve, non-hold-open piston type with self-cleaning debris screen and precise fl ushing capability. Low consumption 1.6 gpf models available. Polished Chrome exterior, angle stop with back-check and vacuum breaker included.




11-1/2”

1” Inlet supply

1-1/2” NPSM4-3/4”*

MINIMUM2-1/4”






SPECIFICATIONS


• Warranty Three Year Warranty• Material Bronze casting with polished chrome fi nish• Water Supply 1" NPT• Fixture type Flushometer valve bowl 1.6 gpf / 6.0 lpf• Supply water pressure 15 psi - 100 psi*

DescriptionExposed, Battery Powered, Sensor Operated G2® Model UrinalFlushometer.

Flush Cycle�Model 8186-0.5 (0.5 gpf/1.9 Lpf)�Model 8186-1.0 Low Consumption (1.0 gpf/3.8 Lpf)�Model 8186 Water Saver (1.5 gpf/5.7 Lpf)

SpecificationsQuiet, Exposed, Diaphragm Type, Chrome Plated Urinal Flushometer foreither left or right hand supply with the following features:• PERMEX™ Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass• Flex Tube Diaphragm designed for improved life and reduced

maintenance• ADA Compliant OPTIMA Plus® Battery Powered Infrared Sensor for

automatic “No Hands” operation• Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high

and low target detection• Isolated Latching Solenoid Operator, isolates magnetic components

from water contact• Engineered Metal Cover with replaceable Lens Window• Courtesy Flush™ Override Button• Four (4) Size AA Batteries factory installed• “Low Battery” Flashing LED• Infrared Sensor Range Adjustment Screw• Initial Set-up Range Indicator Light (first 10 minutes)• ¾” I.P.S. Screwdriver Bak-Chek™ Angle Stop• Free Spinning, Vandal Resistant Stop Cap• Adjustable Tailpiece• High Back Pressure Vacuum Breaker Flush Connection with One-piece

Bottom Hex Coupling Nut• Spud Coupling and Flange for ¾” Top Spud• Sweat Solder Adapter with Cover Tube and Cast Set Screw Wall Flange• High Copper, Low Zinc Brass Castings for Dezincification Resistance• Fixed Metering Bypass and No External Volume Adjustment to Ensure

Water Conservation• Flush Accuracy Controlled by CID™ Technology• Diaphragm, Stop Seat and Vacuum Breaker to be molded from

PERMEX™ Rubber Compound for Chloramine resistance

Valve Body, Tailpiece and Control Stop shall be in conformance with ASTMAlloy Classification for Semi-Red Brass. Valve shall be in compliance withthe applicable sections of ASSE 1037, ANSI/ASME A112.19.6 and MilitarySpecification V-29193. Installation conforms to ADA requirements.

Special Finishes� PB Polished Brass (PVD Finish)� GP Gold Plate (PVD Finish)� BN Brushed Nickel (PVD Finish)� SF Satin Chrome

See Accessories Section and OPTIMA Accessories Section of the Sloancatalog for details on these and other OPTIMA Plus® Flushometervariations.

X

X

X

X

This space for Architect/Engineer approval

Job Name Date

Model Specified Quantity

Variations Specified

Customer/Wholesaler

Contractor

Architect

The information contained in this document is subject to change without notice.

O P T I M A S Y S T E M SBattery Powered Flushometers

G2 Optima Plus 8186 S.S. — Rev. 0a (05/03)

Model

8186

ADA Compliant

AutomaticSloan G2 Optima Plus® Flushometers activate via multi-lobular sensor detection to provide the ultimate insanitary protection and automatic operation. A batterypowered infrared sensor sets the flushing mechanismafter the user is detected and completes the flushwhen the user steps away.

Functional & HygienicTouchless, sensor operation eliminates the need foruser contact to help control the spread of infectiousdiseases. The G2 Optima Plus Flushometer is providedwith an Override Button to allow a "courtesy flush" forindividual user comfort.

EconomicalSloan installed batteries speed installation and provideyears of metered flushing to control the use of waterand energy. Batteries can be changed without turningoff the water. The patented Isolated Operator ensuresreliability by isolating the solenoid components fromthe water.

Warranty5 year (limited)

X

X

X

X

X

SLOAN VALVE COMPANY • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com

Copyright © 2003 Sloan Valve Company Printed in the U.S.A. Made in the U.S.A. G2 Optima Plus 8186 S.S. — Rev. 0a (05/03)

DescriptionExposed, Battery Powered, Sensor Operated G2® Model UrinalFlushometer.

Flush Cycle�Model 8186-0.5 (0.5 gpf/1.9 Lpf)�Model 8186-1.0 Low Consumption (1.0 gpf/3.8 Lpf)�Model 8186 Water Saver (1.5 gpf/5.7 Lpf)

ELECTRICAL SPECIFICATIONS

1. A continuous, invisible lightbeam is emitted from theOPTIMA Plus Sensor.

2. As the user enters the beam’seffective range (15” to 30”)the beam is reflected into theOPTIMA Plus ScannerWindow and transformed intoa low voltage electricalcircuit. Once activated, theOutput Circuit continues in a“hold” mode for as long asthe user remains within theeffective range of the Sensor.

3. When the user steps awayfrom the OPTIMA PlusSensor, the Sensor initiatesan electrical signal thatoperates the Solenoid. Thisinitiates the flushing cycle toflush the fixture. The Circuitthen automatically resets andis ready for the next user.

X

X

Control CircuitSolid State6 VDC Input8 Second Arming Delay24 Hour Sentinel Flush

OPTIMA Sensor TypeActive Infrared

OPTIMA Sensor RangeNominal 15” - 30” (381 mm - 762mm), Adjustable ± 8” (203 mm)

OPERATION

X

X

X

Model

8186

Battery Type(4) AA Alkaline

Battery Life3 Years @ 4,000 Flushes/Month

Indicator LightsRange Adjustment/Low Battery

Operating Pressure15 - 100 psi (104 - 689 kPa)

Sentinel FlushOnce Every 24 Hours After the LastFlush

X

X

X

X

X

Note: Lens Deflector no longer needed fortargeting children or wheel chair users.

11½” (292 mm)

2¼” (57 mm) MIN.

16½” (419 mm)

C/L OFFIXTURE

FINISHEDFLOORFINISHED

WALL

4¾”(121 mm)

¾” I.P.S. (20 mm DN)

SUPPLY

VALVE ROUGH-IN

Typical Urinal Installation

Model 8186

FEATURES

• 19-1/2" diameter• Vitreous china• ADA compliant• Concealed front overfl ow• Complete with installation template and sealing

compound

COLORS/FINISHES

• Standard #01 Cotton

MODELS

• LT402#01 Lavatory only with single hole faucet center

• LT402.4#01 Lavatory only with 4" faucet centers

• LT402.8#01 Lavatory only with 8" faucet centers

LT402Self-Rimming Lavatory

CODES/STANDARDS

• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of

Massachusetts , City of Los Angeles, and others• ADA compliant• Code compliance: UPC, IPC, NSPC, NPC Canada,

and others


The self-rimming lavatory shall be made of vitreous china. Lavatory shall be 19-1/2" in diameter. Product shall be with front overfl ow and lavatory shall include mounting assembly and be ADA compliant. Lavatory shall be TOTO Model LT402_________.

# SS-00330 v.04Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ


LT402Self-Rimming Lavatory

SPECIFICATIONS

• Waste 1-1/4" O.D.• Size 19-1/2"diameter• Basin 14-1/4"W x 14"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 20-1/2 lbs.• Shipping Dimensions 19-5/8"L x 19-5/8"W x 9-1/2"H


8-1/4"(210mm) *13"

(330mm) *14"(356mm)

*31" (787mm)

4" (102mm)

8" (203mm)

1/2" (13mm)

*Suggested dimension

2-1/2" (64mm)

7-1/4"(184mm)

14-1/4"(362mm)

14" (356mm)

19-1/2" (495mm)

19-1/2"(495mm)

1-1/4" O.D. Waste

Supplies

8"(203mm)

9"(229mm)

27"(686mm)

17"(432mm)

34"(864mm)

18"(457mm)

6"(152mm)

ADA Compliance Check

FEATURES

• 17" x 14"• Vitreous china• ADA compliant• Concealed front overflow• Mounting assembly complete with installation

template and mounting screw set for wood countertops• THU410 is required for marble/granite type counter

top installation and must be purchased separately

LT569Undercounter Lavatory

COLORS/FINISHES

• Standard #01 Cotton #03 Bone #12 Sedona Beige

MODELS

• LT569 (#01, #03, #12)

CODES/STANDARDS

• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifications: IAPMO(cUPC), State of

Massachusetts , City of Los Angeles, and others• Meets ADA guidelines and ANSI A117.1

requirements when countertop is installed 864mm (34") from finished floor and lavatory is installed 205mm (8-1/8") minimum from front edge.


The undercounter lavatory shall be made of vitreous china. Lavatory shall be 17"Width x 14" Depth. Product shall be with overflow and lavatory shall include mounting assembly. Lavatory shall be ADA compliant. Lavatory shall be TOTO Model LT569______.

# SS-00333 v.05Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO

LT569Undercounter Lavatory


• Waste 1-1/4" O.D.• Size 19-1/4"W x 16-1/4"D• Basin 17"W x 14"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 17.4 lbs.• Shipping Dimensions 22"W x 8-1/2"H x 18-1/2"L


1-1/8" (28mm)

14"(355mm)

1-1/8" (28mm)

1-1/8" (28mm) 1-1/8" (28mm)17" (432mm)

2-1/2" (63mm)

2-5/8"(68mm)

5-1/8"(131mm)

*13-1/8"(333mm)

*12"(305mm)

*8" (203mm)

1/2" (12mm)

7-1/2"(191mm)

16" (406mm)

13"(329mm)

*Suggested Dimension

8"(203mm)

9"(229mm)

27"(686mm)

17"(432mm)

34"(864mm)

18"(457mm)

6"(152mm)

ADA Compliance Check

Wood/Composite Wood/Etc.Mounting Hardware

THU408 or THU409(Included)

THU410(Sold Separately)

Marble/Granite/Etc.

FEATURES

• 20-7/8" x 18" lavatory with back splash

• Vitreous china

• ADA compliant

• Punching for concealed arm carrier

• Includes wall hanger

• Punching for concealed arm carriers

• Soap dispenser hole

LT307(A)Commercial Wall-Hung Lavatory


The lavatory shall be 20-7/8" width and 18" depth.

The basin shall be 14-3/4" width by 10-1/8" depth.

The lavatory shall be made of vitreous china and

can be installed at ADA height with rear overflow. TOTO model number LT307A#01 shall be drilled

for soap dispenser. Lavatory shall be TOTO model

LT307_______.

COLORS/FINISHES

• Standard

#01 Cotton

#03 Bone

#12 Sedona Beige

MODELS

• LT307

Lavatory only, with single hole

• LT307.4

Lavatory only with 4" faucet centers

• LT307.8

Lavatory only with 8" faucet centers

• LT307A#01 (Cotton only)

Lavatory only with single hole. Left side soap hole

CODES/STANDARDS

• Meets and exceeds ASME A112.19.2/CSA B45.1,

• Certifications: IAPMO(cUPC), State of Massachusetts , City of Los Angeles, and others

• Meets ADA ,TAS, ICC/ANSI A117.1 and CSA B651

• Code compliance: UPC, IPC, NSPC, NPC Canada, and others

LT307(A)Commercial Wall-Hung Lavatory


• Waste 1-1/4" O.D.• Size 20-7/8"W x 18"D• Warranty One Year Limited Warranty• Material Vitreous china• Shipping Weight 40 lbs.• Shipping Dimensions 22-5/8"L x 19-1/8"W x 13-3/4"H

TOTO recommends the use of Jay R. Smith 0700 (Concealed Arms) with 19" arms 0800 (Wall Support Plate).

ADA COMPLIANCE CHECK

34" (864mm)* SUPPLIES

21" (533mm)*

18" (457mm)*

*SUGGESTED DIMENSIONS

BARRIER FREE CLEARANCE

27" (686mm)

8" (203mm)

6" (152mm)

9" (229mm)FINISHED FLOOR

17" (432mm)

18" (458mm)*

11-1/8" (283mm)

34" (864mm)MAX.

1-1/4" O.D.WASTE

FINISHED WALL

8" (203mm)

7-1/2" (191mm)*

10-1/8" (258mm)

18" (458mm)

14-3/4" (375mm)

19-3/8" (492mm)

20-7/8" (530mm)

1-1/4" (33mm)3-1/4" (82mm)

7-1/2" (191mm)

2-7/8" (73mm)

3-1/8" (79mm)WATER LEVEL

LT307A

LT307.44" (102mm)

16-7/8" (428mm)

33-1/4" (844mm)

3-7/8" (100mm)

8" (204mm) LT307.8

3/4" (20mm)

# SS-00336 v.08Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com


FEATURES

• 19"x 15" • Oval Undercounter Lavatory• ADA compliant • Vitreous china• Front overfl ow• Mounting assembly complete with installation

template and mounting screw set for wood countertops• THU410 is required for marble/granite type counter

top installation and must be purchased separately

COLORS/FINISHES

• #01 Cotton

MODELS

• LT233 (#01)

LT233Atherton™ Undercounter Lavatory


The undercounter lavatory shall be made of vitreous china. Lavatory shall be 19-3/8"in width and 15-1/2" in depth. Product shall be with overfl ow and lavatory shall include mounting assembly and be ADA compliant.TOTO Model LT233_________.

CODES/STANDARDS

• Meets ADA guidelines and ANSI A117.1 requirements when countertop is installed 864mm (34") from fi nished fl oor and lavatory is installed 25mm (1") minimum from front edge.

• Meets and exceeds ASME A112.19.2/CSA B45.1• Certifi cations: IAPMO(cUPC), State of

Massachusetts, City of Los Angeles, and others.

#SS-01076 v.02Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA

LT233Atherton™ Undercounter Lavatory


• Waste: 1-1/4" (32 mm)• Overall Size: 22-5/8” (575 mm) x

18-3/8” (466 mm)• Cutout: 18-5/8"(473mm) x

14-3/4"(375mm)• Basin Depth: 4” (103 mm)• Basin: 19-3/8” (493 mm) x

15-1/2” (395 mm)

• Warranty: One Year Limited Warranty• Material: Vitreous china• Shipping Weight: 22.5lbs (10 kg)• Shipping Dimensions: 23-1/2" x 19-1/2" x 7-1/2”

Note: Low flow faucets are recommended.

These dimensions and specifications are subject to change without notice.

*

4" [103mm]

1" [25mm]

5 7/8" [150mm]

2 5/8" [65mm]

34" [864mm]*

1 14" *WASTE

8" [203mm]

* Suggested Dimensions

3/8" * SUPPLY

14" [356mm]*

10 3/4" [273mm]*

19 3/8" [493mm]

22 5/8" [575mm]

15 1/2" [395mm]18 3/8" [466mm]

BASIN WIDTH

BASIN DEPTH

MAX

24" [610mm]

1" [25mm]

27" [686mm]

1" [25mm]

11" [279mm]

9" [228mm]

8" [203mm]

MINIMUM

34" [864mm]

10 3/4" [273mm]

ADA COMPLIANCE CHECK

Wood/Composite Wood/Etc.Mounting Hardware

THU408 or THU409(Included)

THU410(Sold Separately)

Marble/Granite/Etc.

TEL105 SeriesStandard EcoPower® Faucet

FEATURES

• Self-generating hydropowered EcoPower system• No minimum daily usage requirement• Micro-sensor positioned underneath the spout

head for accurate hand detection ensuring smooth and consistent water distribution

• Vandal resistant aerator housing• Durable chrome plated spout body• Single-hole mount• Kit includes spout body, controller box , and

mounting hardware - less supply lines• Equipped with 0.5gpm flow control

MODELS

COLORS/FINISHES

• #CP Polished Chrome• #BN Brushed Nickel• #PN Polished Nickel

TEL105-D10E • TELS105 (Standard Spout) • TELC105-D10E (Controller: 0.09gpc,

10 sec on-demand)

TEL105-D10EM • TEL105-D10E (Standard Spout Kit) • TLM10 (Mixing Valve)

TEL105-D10ET • TEL105-D10E (Standard Spout Kit) • TLT10 (Thermostatic Mixing Valve)

TEL105-C20E • TELS105 (Standard Spout) • TELC105-C20E (Controller: 0.19gpc,

20 sec continuous)

TEL105-C20EM • TEL105-C20E (Standard Spout Kit) • TLM10 (Mixing Valve)

TEL105-C20ET • TEL105-C20E (Standard Spout Kit) • TLT10 (Thermostatic Mixing Valve)


TOTO Model #______________ The faucet shall have hydropowered self-generating, EcoPower System. The faucet shall have maximum of 10 seconds on-demand flow (0.09gpc), or 20 seconds continuous flow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). The faucet shall have self-adjusting sensor.

CODES/STANDARDS

• Operates below federally mandated consumption limit of 0.25gpc

• Complies to California Green Building Code, CALGreen of 0.20 gpc

• Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011

• Certifications: IAPMO(cUPC), State of Massachusetts, and others

• California Green Code and City of Los Angeles Water Efficiency Ordinance

• ADA compliant• Complies with federal and state statutes as

low-lead (contains a weighted average of 0.25% lead or less)

* For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheet

LOW-LEAD

OPTIONAL ACCESSORIES

• THP3158#CP - 4" Cover Plate• 71244T8CC - 8" Cover Plate

Standard EcoPower® Faucet

#SS-01078, v.03Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA


TEL105 Series

NOTE

Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage.

Water SavingOn-Demand [10 sec.] faucet (0.09gpc)Federal Standard (0.25gpc) – 64% lessCAL Green (0.20gpc) – 55% less

Continuous [20 sec.] faucet (0.19gpc)Federal Standard (0.25gpc) – 24% lessCAL Green (0.20gpc) – 5% less

3-15/16” (100mm)

(50mm)

2-15

/16”

(7

4mm

)

4-1

/2”

(114

mm

)2”

(50m

m)

Max

dec

k th

ickn

ess

Faucet hole Ø1-3/8” (Ø35mm)

5-5/

8”(1

42m

m)

G1/2 1-11/16” (42mm)

1-3/

4”(4

4mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16”

(82m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)

G1/2 compatibel with ½ NPSM

3-5/16”(84mm)

3-3

/16”

(82m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3-15/16” (100mm)

(50mm)

2-15

/16”

(7

4mm

)

4-1

/2”

(114

mm

)2”

(50m

m)

Max

dec

k th

ickn

ess


5-5/

8”(1

42m

m)

G1/2 1-11/16” (42mm)

1-3/

4”(4

4mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16”

(82m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3-3

/16”

(82m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3-15/16”

(100mm)

(50mm)

2-1

5/1

6”

(74

mm

)

4

-1/2

”

(114

mm

)

2”

(50

mm

)

Max d

eck

thic

kness


5-5

/8”(

142m

m)

G1/2 1-11/16” (42mm)

1-3

/4”

(44

mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16

”(8

2m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3/8 COMPRESSION

2-1

/2”

(63

mm

)

1-7/1

6”

(36

mm

)

2-13/16” (71mm)7/8”(23mm)

3-15/16”

(100mm)

(50mm)

2-1

5/1

6”

(74

mm

)

4

-1/2

”

(114

mm

)

2”

(50

mm

)

Max d

eck

thic

kness


5-5

/8”(

142m

m)

G1/2 1-11/16” (42mm)

1-3

/4”

(44

mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16

”(8

2m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3/8 COMPRESSION

2-1

/2”

(63

mm

)

1-7/1

6”

(36

mm

)

2-13/16” (71mm)7/8”(23mm)

Standard Controller

Hot/Cold Mixing Tee (TLM10)

Available Mixing Valves

*Gallons per cycle (gpc) is the amount of water per usage cycle .** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).*** Continuous means that water is dispersed for a continuous 20 second cycle.

SPECIFICATIONSEcoPower

5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting

Min (Dynamic/Flowing) Pressure: 15psi (100kPa)Max (Static) Pressure: 80 psi (551kPa)

G1/2 (1/2 NPSM compatible)

32-110°F(0-42°C)

32-104°F(0-40°C)

Max. 90% RH

0.09 gpc* - max 10 second On-Demand**(0.09 gpc = 0.5 gpm x 10/60 sec)Equipped with 0.5 gpm flow control

0.19 gpc* - 20 second Continuous***(0.19 gpc = 0.5 gpm x 20/60 sec)Equipped with 0.5 gpm flow control

Three years

Power Supply

Sensor DetectionRange

Water Supply Pressure

Water Supply

Inlet TemperatureRange

Ambient Temperature

Humidity

Flow Rate

Warranty

Thermostatic Mixing Valve (TLT10)

TEL3GC & TEL5GC SeriesHelix® EcoPower® Faucet

FEATURES• Hydropower self-generating system• Sensor faucet with laminar fl ow• Self adjusting faucet with control box and

mounting hardware, less supply lines• 1/2” water supply male threaded• NSF compliant• Single-hole mount

COLORS/FINISHES

MODELS

PRODUCT SPECIFICATION• #CP Polished Chrome

• TEL3GC10#CP - Single Supply Discharge: On-demand; Up to 10 seconds while activated.

• TEL5GC10#CP - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V510

• TEL3GC60#CP - Single Supply Discharge: On-demand; Up to 60 seconds while activated.

• TEL5GC60#CP - Thermal Mixing Discharge: On-demand; Up to 60 seconds while activated. Controller/Mixer #: TN78-10V560

• Optional Accessories: TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate

TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed inwaterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve.

CODES/STANDARDS• Meets or exceeds ASME A112.18.1/CSA B125.1,

NSF 61-9, and ASSE 1070*• Certifi cations: IAPMO(cUPC), ASSE, State of


and others• Legislative compliance: California AB 1953 &

Vermont S.152, California Green Code, and City of Los Angeles Water Effi ciency Ordinance

• ADA compliant

*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.

Helix® EcoPower® Faucet


Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com These dimensions and specifi cations are subject to change without notice

Single Supply Thermal Mixing

1"(25mm)

1"(25mm)

1-2/3"(42mm)3-3/4"

(95mm)

1-1/2"(38mm)

8" (203mm)

6"(152mm)

6-1/2"(165mm

10-1/4"(260mm)

34"(864mm)

17-1/8"(436mm)

16-7/8"(428mm)HOT

COLD

F.L.

1-3/16"(30mm)

6-5/8"(169mm)

4-15/16"(125mm)

6"(152mm)

5-1/2"(140mm)

10-1/4"(260mm)

1"(25mm)

1"(25mm)

31"(787mm)

10-1/4"(260mm)

6-5/8"(169mm

4-15/16"(125mm)

20-3/4"(527mm)Water supply

F.L.

30° 30°

TEL3GC & TEL5GC Series

SPECIFICATIONS

• Warranty Three year warranty• Material Bronze with polished chrome fi nish• Power Supply Hydropower self-generating system• Hot/Cold-water Supply Minimum required water

pressure: 20PSI Maximum water pressure:

125PSI*• Water Supply Connect 1/2" NPSM• Water Consumption 60 Second Faucet: 1.0 gpm (4.0 lpm) 10 Second Faucet: 0.17 gal. per cycle (max)• Water Saving Function Automatically turns OFF

when user removes hands Maximum continuous run time is 10 or 60 seconds

• Detection time ON feature: Immediate OFF feature: 1 second delay• Detection range Factory set at 2-1/4" Faucet automatically sets the

detection range according to the size of the basin

• Discharge water Thermal Mixing Faucet: temperature control Cold water - 104°F (Max)

range (When used under standard conditions)

• Anti-scald safety Provides the user protection feature against exposure to

excessive water temperature (Thermal mixing faucet, only)

NOTEFollowing the Federal mandate for water effi ciency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: fl ow rate and water consumption.

With the “Water Consumption” standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.17 gallons of water. This is a 32% below the base line of 0.25 gallons per cycle.

Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings.

TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various effi ciency programs. For more information, please consult www.totousa.com.

*Water pressures over 80 psi are not recommended for most plumbing fi xtures.

Maximum deck thickness 2" (50mm)

TEL115 SeriesHelix® EcoPower® Faucet

FEATURES




mounting hardware - less supply lines• 0.5 gpm aerated fl ow

COLORS/FINISHES


MODELS

TEL115-D10E • TELS115 (Helix Spout) • TELC105-D10E (Controller: 0.09gpc,

10 sec on-demand)

TEL115-D10EM • TEL115-D10E (Helix Spout Kit) • TLM10 (Mixing Valve)

TEL115-D10ET • TEL115-D10E (Helix Spout Kit) • TLT10 (Thermostatic Mixing Valve)

TEL115-C20E • TELS115 (Helix Spout) • TELC105-C20E (Controller: 0.19gpc,

20 sec continuous)

TEL115-C20EM • TEL115-C20E (Helix Spout Kit) • TLM10 (Mixing Valve)

TEL1115-C20ET • TEL115-C20E (Helix Spout Kit) • TLT10 (Thermostatic Mixing Valve)


TOTO Model #______________ The faucet shall have hydropowered self-generating, EcoPower System. The faucet shall have maximum of 10 seconds on-demand fl ow (0.09gpc), or 20 seconds continuous fl ow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). The faucet shall have self-adjusting sensor.

CODES/STANDARDS




• Certifi cations: IAPMO(cUPC), State of Massachusetts, and others

• California Green Code and City of Los Angeles Water Effi ciency Ordinance



* For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets.LOW-LEAD

OPTIONAL ACCESSORIES• THP3158#CP - 4" Cover Plate• 71244T8CC - 8" Cover Plate• TH559EDV566 – Laminar Flow Nozzle

Helix® EcoPower® Faucet



TEL115 Series

NOTE




4-15/16”(125mm)

3-3

/4”

(95m

m)

6-3

/4”

(168

mm

)


2”(50mm)

2” (5

0mm

)M

ax d

eck

thic

knes

s 5-5/

8”(1

42m

m)

G1/2 1-11/16” (42mm)

1-3/

4”(4

4mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)Helix Controller

*Gallons per cycle (gpc) is the amount of water per usage cycle .** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).*** Continuous means that water is dispersed for a continuous 20 second cycle


5-1/8" - 7-7/8" (130 - 200mm)

Sensor is self-adjusting



32-110°F(0-42°C)

32-104°F(0-40°C)

Max. 90% RH

0.09 gpc* - max 10 second On-Demand**

(0.09 gpc = 0.5 gpm x 10/60 sec)

Equipped with 0.5 gpm flow control

0.19 gpc* - 20 second Continuous***

(0.19 gpc = 0.5 gpm x 20/60 sec)

Equipped with 0.5 gpm aerated flow

Three years

Power Supply



Water Supply


Ambient Temperature

Humidity

Flow Rate

Warranty

3-15/16”

(100mm)

(50mm)

2-1

5/1

6”

(74

mm

)

4

-1/2

”

(114

mm

)

2”

(50

mm

)

Max d

eck

thic

kness


5-5

/8”(

142m

m)

G1/2 1-11/16” (42mm)

1-3

/4”

(44

mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16

”(8

2m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3/8 COMPRESSION

2-1

/2”

(63

mm

)

1-7/1

6”

(36

mm

)

2-13/16” (71mm)7/8”(23mm)

3-15/16”

(100mm)

(50mm)

2-1

5/1

6”

(74

mm

)

4

-1/2

”

(114

mm

)

2”

(50

mm

)

Max d

eck

thic

kness


5-5

/8”(

142m

m)

G1/2 1-11/16” (42mm)

1-3

/4”

(44

mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16

”(8

2m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3/8 COMPRESSION

2-1

/2”

(63

mm

)

1-7/1

6”

(36

mm

)

2-13/16” (71mm)7/8”(23mm)




TEL135 SeriesHelix® Wall-Mount EcoPower® Faucet

FEATURES




mounting hardware - less supply lines• 0.5 gpm aerated fl ow

COLORS/FINISHES


MODELS

TEL135-D10E • TELS135 (Helix WM Spout) • TELC105-D10E (Controller: 0.09gpc,

10 sec on-demand)

TEL135-D10EM • TEL135-D10E (Helix WM Spout Kit) • TLM10 (Mixing Valve)

TEL135-D10ET • TEL135-D10E (Helix WM Spout Kit) • TLT10 (Thermostatic Mixing Valve)

TEL135-C20E • TELS135 (Helix WM Spout) • TELC105-C20E (Controller: 0.19gpc,

20 sec continuous)

TEL135-C20EM • TEL135-C20E (Helix WM Spout Kit) • TLM10 (Mixing Valve)

TEL135-C20ET • TEL135-C20E (Helix WM Spout Kit) • TLT10 (Thermostatic Mixing Valve)


TOTO Model #______________ The faucet shall have hydropowered self-generating, EcoPower System. The faucet shall have maximum of 10 seconds on-demand fl ow (0.09gpc), or 20 seconds continuous fl ow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). The faucet shall have self-adjusting sensor.

CODES/STANDARDS





• California Green Code and City of Los Angeles Water Effi ciency Ordinance



* For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets.

LOW-LEAD

OPTIONAL ACCESSORIES• TH559EDV566 – Laminar Flow Nozzle

Helix® Wall-Mount EcoPower® Faucet



TEL135 Series

NOTE




Finished wall

Ø2-

3/8”

(Ø60

mm

)

7-11/16”(194mm)

7-5/16”(186mm)

Ø2-3/16” (Ø50mm)

Helix Wall-Mount Controller



5-1/8" - 7-7/8" (130 - 200mm)




32-110°F(0-42°C)

32-104°F(0-40°C)

Max. 90% RH


(0.09 gpc = 0.5 gpm x 10/60 sec)



(0.19 gpc = 0.5 gpm x 20/60 sec)


Three years

Power Supply



Water Supply


Ambient Temperature

Humidity

Flow Rate

Warranty

3-15/16”

(100mm)

(50mm)

2-1

5/1

6”

(74

mm

)

4

-1/2

”

(114

mm

)

2”

(50

mm

)

Max d

eck

thic

kness


5-5

/8”(

142m

m)

G1/2 1-11/16” (42mm)

1-3

/4”

(44

mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16

”(8

2m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3/8 COMPRESSION

2-1

/2”

(63

mm

)

1-7/1

6”

(36

mm

)

2-13/16” (71mm)7/8”(23mm)

3-15/16”

(100mm)

(50mm)

2-1

5/1

6”

(74

mm

)

4

-1/2

”

(114

mm

)

2”

(50

mm

)

Max d

eck

thic

kness


5-5

/8”(

142m

m)

G1/2 1-11/16” (42mm)

1-3

/4”

(44

mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16

”(8

2m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3/8 COMPRESSION

2-1

/2”

(63

mm

)

1-7/1

6”

(36

mm

)

2-13/16” (71mm)7/8”(23mm)




4-15/16”(125mm)

3-3

/4”

(95m

m)

6-3

/4”

(168

mm

)


2”(50mm)

2” (5

0mm

)M

ax d

eck

thic

knes

s 5-5/

8”(1

42m

m)

G1/2 1-11/16” (42mm)

1-3/

4”(4

4mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

TEL145 SeriesAxiom® EcoPower® Faucet

FEATURES

• Self-generating hydropowered EcoPower system

• No minimum daily usage requirement

• Micro-sensor positioned underneath the spout

head for accurate hand detection ensuring smooth

and consistent water distribution

• Vandal resistant aerator housing

• Durable chrome plated spout body

• Single-hole mount

• Kit includes spout body, controller box , and

mounting hardware - less supply lines

• 0.5 gpm aerated fl ow

COLORS/FINISHES


MODELS

TEL145-D10E • TELS145 (Axiom Spout)

• TELC105-D10E (Controller: 0.09gpc,

10 sec on-demand)

TEL145-D10EM

• TEL145-D10E (Axiom Spout Kit)

• TLM10 (Mixing Valve)

TEL145-D10ET

• TEL145-D10E (Axiom Spout Kit)

• TLT10 (Thermostatic Mixing Valve)

TEL145-C20E • TELS145 (Axiom Spout)

• TELC105-C20E (Controller: 0.19gpc,

20 sec continuous)

TEL145-C20EM

• TEL145-C20E (Axiom Spout Kit)

• TLM10 (Mixing Valve)

TEL145-C20ET

• TEL145-C20E (Axiom Spout Kit)

• TLT10 (Thermostatic Mixing Valve)


TOTO Model #______________ The faucet shall have

hydropowered self-generating, EcoPower System.

The faucet shall have maximum of 10 seconds

on-demand fl ow (0.09gpc), or 20 seconds continuous fl ow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models

only). The faucet shall have self-adjusting sensor.

CODES/STANDARDS

• Operates below federally mandated consumption

limit of 0.25gpc

• Complies to California Green Building Code,

CALGreen of 0.20 gpc

• Meets or exceeds ASME A112.18.1M/CSA B125.1,

and NSF372-2011


• California Green Code and City of Los Angeles

Water Effi ciency Ordinance• ADA compliant

• Complies with federal and state statutes as

low-lead (contains a weighted average of 0.25%

lead or less)

* For codes and standards of mixing valves TLM10 and TLT10,

please refer to corresponding product spec sheets.LOW-LEAD

OPTIONAL ACCESSORIES• THP3158#CP - 4" Cover Plate

• 71244T8CC - 8" Cover Plate

• TH559EDV566 - Laminar Flow Nozzle

Axiom® EcoPower® Faucet



NOTE




TEL145 Series

1-1/16” (27mm)

1-1/

16”

(27m

m)

6-7/16”(163mm)

3-3/

4”(9

5mm

)

5”(126mm)

(50mm)

4-13

/16”

(122

mm

)1-

9/16

”(4

0mm

)M

ax d

eck

thic

knes

s


Axiom Controller



5-1/8" - 7-7/8" (130 - 200mm)




32-110°F(0-42°C)

32-104°F(0-40°C)

Max. 90% RH


(0.09 gpc = 0.5 gpm x 10/60 sec)



(0.19 gpc = 0.5 gpm x 20/60 sec)


Three years

Power Supply



Water Supply


Ambient Temperature

Humidity

Flow Rate

Warranty

3-15/16”

(100mm)

(50mm)

2-1

5/1

6”

(74

mm

)

4

-1/2

”

(114

mm

)

2”

(50

mm

)

Max d

eck

thic

kness


5-5

/8”(

142m

m)

G1/2 1-11/16” (42mm)

1-3

/4”

(44

mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16

”(8

2m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3/8 COMPRESSION

2-1

/2”

(63

mm

)

1-7/1

6”

(36

mm

)

2-13/16” (71mm)7/8”(23mm)

3-15/16”

(100mm)

(50mm)

2-1

5/1

6”

(74

mm

)

4

-1/2

”

(114

mm

)

2”

(50

mm

)

Max d

eck

thic

kness


5-5

/8”(

142m

m)

G1/2 1-11/16” (42mm)

1-3

/4”

(44

mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16

”(8

2m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3/8 COMPRESSION

2-1

/2”

(63

mm

)

1-7/1

6”

(36

mm

)

2-13/16” (71mm)7/8”(23mm)




1-1/16” (27mm)

1-1/

16”

(27m

m)

6-7/16”(163mm)

3-3/

4”(9

5mm

)

5”(126mm)

(50mm)

4-13

/16”

(122

mm

)1-

9/16

”(4

0mm

)M

ax d

eck

thic

knes

s


5-5/

8”(1

42m

m)

G1/2 1-11/16” (42mm)

1-3/

4”(4

4mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

TEL165 SeriesGooseneck Wall-Mount EcoPower® Faucet

FEATURES• Self-generating hydropowered EcoPower system• No minimum daily usage requirement• Micro-sensor positioned underneath the spout



mounting hardware - less supply lines• Equipped with 0.5gpm flow control

COLORS/FINISHES• #CP Polished Chrome

MODELS TEL165-D10E

• TELS165 (Gooseneck WM Spout) • TELC105-D10E (Controller: 0.09gpc,

10 sec on-demand)

TEL165-D10EM • TEL105-D10E (Gooseneck WM Spout Kit) • TLM10 (Mixing Valve)

TEL165-D10ET • TEL165-D10E (Gooseneck WM Spout Kit) • TLT10 (Thermostatic Mixing Valve)

TEL165-C20E • TELS165 (Gooseneck WM Spout) • TELC105-C20E (Controller: 0.19gpc,

20 sec continuous)

TEL165-C20EM • TEL165-C20E (Gooseneck WM Spout Kit) • TLM10 (Mixing Valve)

TEL165-C20ET • TEL165-C20E (Gooseneck WM Spout Kit) • TLT10 (Thermostatic Mixing Valve)

PRODUCT SPECIFICATIONTOTO Model #______________ The faucet shall have hydropowered self-generating, EcoPower System. The faucet shall have maximum of 10 seconds on-demand flow (0.09gpc), or 20 seconds continuous flow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). The faucet shall have self-adjusting sensor.

CODES/STANDARDS• Operates below federally mandated consumption

limit of 0.25gpc• Complies to California Green Building Code,

CALGreen of 0.20 gpc• Meets or exceeds ASME A112.18.1M/CSA B125.1,

and NSF372-2011• Certifications: IAPMO(cUPC), State of

Massachusetts, and others• California Green Code and City of Los Angeles

Water Efficiency Ordinance• ADA compliant• Complies with federal and state statutes as


* For codes and standards of mixing valves TLM10 and TLT10, please refer to corresponding product spec sheets.

LOW-LEAD

OPTIONAL ACCESSORIES• THP3094 - Laminar Flow Nozzle

Gooseneck Wall-Mount EcoPower® Faucet



TEL165 Series

NOTE




6-1/

2”(1

65m

m)

7”(177mm)

2” (50mm)Max Wall thickness

Ø1-1/8”(Ø29mm)

2-7/

8”(7

2mm

)8-

7/8”

(221

mm

)

2”(50mm)

5-5/

8”(1

42m

m)

G1/2 1-11/16” (42mm)

1-3/

4”(4

4mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)Gooseneck Wall-Mount Controller

*Gallons per cycle (gpc) is the amount of water per usage cycle .** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).*** Continuous means that water is dispersed for a continuous 20 second cycle


5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting



32-110°F(0-42°C)

32-104°F(0-40°C)

Max. 90% RH

0.09 gpc* - max 10 second On-Demand**(0.09 gpc = 0.5 gpm x 10/60 sec)Equipped with 0.5 gpm flow control

0.19 gpc* - 20 second Continuous***(0.19 gpc = 0.5 gpm x 20/60 sec)Equipped with 0.5 gpm flow control

Three years

Power Supply



Water Supply


Ambient Temperature

Humidity

Flow Rate

Warranty

3-15/16”

(100mm)

(50mm)

2-1

5/1

6”

(74

mm

)

4

-1/2

”

(114

mm

)

2”

(50

mm

)

Max d

eck

thic

kness


5-5

/8”(

142m

m)

G1/2 1-11/16” (42mm)

1-3

/4”

(44

mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16

”(8

2m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3/8 COMPRESSION

2-1

/2”

(63

mm

)

1-7/1

6”

(36

mm

)

2-13/16” (71mm)7/8”(23mm)

3-15/16”

(100mm)

(50mm)

2-1

5/1

6”

(74

mm

)

4

-1/2

”

(114

mm

)

2”

(50

mm

)

Max d

eck

thic

kness


5-5

/8”(

142m

m)

G1/2 1-11/16” (42mm)

1-3

/4”

(44

mm

)7”

(178

mm

)

4-5/8”(117mm) 3-5/16”(83mm)

3-5/8”(94mm)

3-3

/16

”(8

2m

m)

G1/

2

G1/2

G1/

2

Φ1-5/8”(Φ42mm)


3-5/16”(84mm)

3/8 COMPRESSION

2-1

/2”

(63

mm

)

1-7/1

6”

(36

mm

)

2-13/16” (71mm)7/8”(23mm)




MODEL:

VoltageFrequencyPower consuptionCurrent (Running)Electrical IsolationAir SpeedDrying TimeDimensions

WeightIP CodeNoise (@ 2 mt)Number of MotorsMotors SpeedMotors Driving SystemHands Detection System

240V 120V

220/230/240V~50/60 Hz1.760 W8.0A @ 230VacClass ll*200 Km/h (125 Mph)10-15 s300 x 195 x 617 (mm)11.81x7.67x24.29 (inches)9.55 Kg (21.1 Lb)IP3370 dB230.000 rpmSoft StartingIR - Barrier

110/120V~50/60 Hz1.749 W15.9A @ 120VacClass ll*200 Km/h (125 Mph)10-15 s300 x 195 x 617 (mm)11.81x7.67x24.29 (inches)9.55 Kg (21.1 Lb)IP3370 dB230.000 rpmSoft StartingIR - Barrier

VELTIA HAND DRYER

Data Sheet

VELTIA® an innovative hand dryer that operates without heating element. Operates automatically when putting your handsin the drying chamber and works based on high speed air allowing to dry hands in a very short time leaving on the skin anice feeling of a massage.

Besides a great effectiveness, VELTIA® includes a bad scents elimination system thanks to ZEROSMELL® (sold separatly).

VELTIA® is ideal for washrooms with medium and high number of users per day.

Patent Number: WO / 2006 / 042896

TECHNICAL, ENVIRONMENTAL AND MECHANICAL SPECIFICATIONS

MATERIALSHousing case and water tank made of High impact 2.6mm thick ABS with antibacterial protection in drying areaAll plastic pieces are properly prepared for recyclingInternal parts are contained by fire retardant plastic rated 5VA according to directive UL94VELTIA complies with ROHS directive

DIMENSIONS

617 mm24.29 ’’

195 mm7.67 ’’

300 mm11.81 ’’

CERTIFICATIONSEuropeans Directives:Other CertificationsD89/336/CEE y D92/31/CEE;D73/23/CEE y D93/68/CEE;D98/37/CEE;D92/59/CEE y D2001/95/CEEOther Certifications:ANCE NOM, SABS, UL

Product information subject to changes without further notice

Rev.:1.1 Oct 2.008 VELTEK SYSTEMS S.L. 1/2

VELTIA HAND DRYER

Data Sheet

RECOMENDED HEIGHTSFOR INSTALLATION

MAINTENANCE

Product information subject to changes without further notice

Rev.:1.1 Oct 2.008 VELTEK SYSTEMS S.L. 2/2

Warning: Water tank full; mustbe emptied.

1 2

Air Filters: To be checked often and cleaned ifnecessary.

ZeroSmell®: Must be changedevery 3 months.

97.8cm / 38.5¨

82.8cm / 32.6¨

90cm / 35.4¨

75cm / 29.5¨67cm / 26.4¨

52cm / 20¨

38cm / 14¨

23cm / 9¨

ø: 8mm (5/16)

LL

HDR120#WHSensor Activated Clean Dry® Hand Dryer

FEATURES

• Hygienic sensor-activated hand dryer• Double-sided blowers for faster dry time• Sleek and compact design• 208 mph of air speed• Side panels and water tray to prevent water from

trickling to the floor• Low operating noise - 57dB(A) • Energy efficient

COLORS/FINISHES

CODES/STANDARDS


• #WH White

• Meets or exceeds ANSI/UL 507, 9th edition, Rev. June 18th 2012 and CSA C22.2 No. 113-12 Oct 2012.

• Certifications: Intertek/ETL

TOTO Model No. HDR120#WH shall be a sensor activated hand dryer. Product shall have double-sided blowers with 208mph of air speed. Product shall have the decibel rating of 57dB(A) and power rating of 690 W.

17-1/8”(435mm)

19-1/4(490mm)

2-3/4”(70mm)3-1/8”(80mm)

**Does not include junction boxRecommended mounting bracketheights from floor are as follows:

General users: 35” [890mm]Children: 26-1/8” [665mm]ADA: 34” [865] **

**For ADA installation, refer to codes.

Mounting bracket(Base plate)

Junction box**Inatallation Template

2”(50mm)

11-3/4”(300mm)

7-3/8”

(186mm)

3-7/8”(100mm)

2”(50mm)

21-5/8”(550mm)

3/4”(20mm)

***Clearance is required in order to take the water tray side covers for cleaning and maintenance.

HDR120#WHSensor Activated Clean Dry® Hand Dryer

# SS-00640 v. 03Printed in U.S.A. | © TOTO USA 05/13 | Printed on recycled paper ♻



SPECIFICATIONS

ROUGH-IN


• Warranty One Year Warranty• Power Connection Hardwired• Power Rating 120V AC, 5.75 Amps, 60 Hz,

690 W• Power Saving Function Automatically turns OFF when

hands are removed or after 30 seconds of use

• Air Speed 208mph• Water Tray Capacity 0.25gal (950ml)• Unit Size 11 13/16” x 7 3/8” x 21 5/8”• Unit Weight 16.1lb (7.3kg)• Operating Temperature 32°-104°F (0°-40°C)• Shipping Size 25-5/8” x 14-31/32” x 10-15/16” (650mm x 380mm x 277mm)• Shipping Weight 21.4lb (9.7kg)

INSTALLATION NOTES

For ADA installation, refer to codes. See the templete for locating the installation of the mounting bracket.

HDR101#WHClean Dry® High Speed Hand Dryer

FEATURES

• High speed hand dryer• Hygienic, touch-free operation• Splash resistant• Water tray to prevent slip and fall• Space saving, compact design• Low Operating noise 57dB(A)• Energy Efficient 390W• AC powered

COLORS/FINISHES

CODES/STANDARDS


• #WH White

• Meets or exceeds ANSI/UL 507, 9th edition, Rev.June 18th 2012 and CSA C22.2 No. 113-12 Oct 2012.

• Certifications: Intertek/ETL• Code Compliance: NEC, CEC

TOTO Model No. HDR101#WH shall be a high speed hand dryer. The product shall provide hygienic, touch-free operation. The product shall have water tray to prevent wet floor. The product shall have operating noise of 57dB(A) or less. The product shall be AC powered and consume 390 W or less.

HDR101#WHClean Dry® High Speed Hand Dryer

# SS-01066 v. 03Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA


SPECIFICATIONS

ROUGH-IN


• Warranty One Year Warranty• Power Connection Hardwired• Power Rating 120V AC,3.3Amps, 60 Hz, 390 W• Power Saving Function Automatically turns OFF when


• Air Speed 220 mph• Water Tray Capacity 0.15 gal (600 ml)• Unit Size 9-5/8" x 6-1/8" x 18-1/2"

(245mm x 154mm x 470mm)• Unit Weight 7.9 lb (3.6 kg)• Operating Temperature 32F°-113F° (0C°-45C°)• Shipping Size 20-3/8" x 11-3/8" x 7-1/2"

(518mm x 289mm x 190mm• Shipping Weight 10.6lb (4.8kg)

INSTALLATION NOTES

Check local code requirements for additionalmounting height details.

For installation/uninstallation and proper functioning of front cover and water tray, keep some empty space around the product. There should be no obstructions within 30 mm from either side, 30 mm from the bottom, or 30 mm from the top of the product.

(600mm)23-5/8”

Recommended mounting bracket heights from floor are as followFor general users: 49-3/4”(1265mm)For users in wheel chairs: 42-3/8”(1077mm)For children: 40”(1015mm)

Meets the American Disabilities Act Guidelines, ANSI A117.1 and CSA B651 requirements when mounted in a recessed wall where the front surface is not more than 4” (102mm) from finished wall and mounting height for U.S. is 48” (1219mm) max to blower outlet from floor, and for Canada is 47-1/4” (1200mm) max to blower outlet from floor. Check local code requirements for additional mounting height details.

(154mm)6-1/8”

(30mm)1-1/8”

(30mm)1-1/8”

(470mm)18-1/2”

(30mm)

1-1/8”

(245mm)

9-5/8”

(30mm)

1-1/8”

HDR111#SSClean Dry® High Speed Hand Dryer

FEATURES

• High speed hand dryer• Hygienic, touch-free operation• Splash resistant• Space saving, in-wall design• Vandal proof water tray• Low Operating noise 56dB(A)• Energy Efficient 390W• AC powered • Stainless Steel Cover• Flush mount• ADA compliant

COLORS/FINISHES

CODES/STANDARDS


• #SS Stainless Steel Finish


• Certifications: Intertek/ETL• Code Compliance: NEC, CEC• ADA compliant

TOTO Model No. HDR111#SS shall be a high speed hand dryer. The product shall provide hygienic, touch-free operation. The product shall have vandal proof water tray to prevent wet floor. The product shall have operating noise of 56dB(A) or less. The product shall be AC powered and consume 390 W or less. The product shall have stainless steel cover. The product shall allow for flush mount and be ADA compliant.

HDR111#SSClean Dry® High Speed Hand Dryer



SPECIFICATIONS

ROUGH-IN




• Air Speed 221 mph• Water Tray Capacity 0.22 gal (850 ml)• Unit Size 12-5/8" x 6-1/2" x 22-5/8"


(690mm x 398mm x 223mm)• Shipping Weight 22.7lb (10.3kg)

INSTALLATION NOTES

Meets the American Disabilities Act Guidelines, ANSI A117.1 and CSA B651 requirements when mounted in a recessed wall where the front surface is not more than 4” (102mm) from finished wall and mounting height for U.S. is 48” (1219mm) max to blower outlet from finished floor, and for Canada is 47-1/4” (1200mm) max to blower outlet from finished floor.

Check local code requirements for additional mounting height details.

Stringer/additional stud, internal dimension

H21-5/8" x W12" (H550 x W305mm)

greater than

23-5/8” (600mm)

12“ (305mm)

21-5/8”

(550mm)

Additional stud

StudStud

Stringer

Stringer / Traverse / Tirante

Additional stud

Finish the wall with H21-5/8" x W12" (H550 x W305mm) aperture area.

greater than 5-3/8” (135mm)

21-5/8”

(550mm)

Finished Wall

Finished Floor

*

Meets the American Disabilities Act Guidelines, ANSI A117.1 and CSA B651 requirements

when mounting height for U.S. is 48” (1219mm) max to blower outlet from floor, and

for Canada is 47-1/4” (1200mm) max to blower outlet from floor.


Recommended mounting bracket (lower) heights from floor are as follow:

For general users: 31-1/4”(795mm)　　For users in wheel chairs: 23-7/8”(607mm)

For children: 21-1/2”(545mm)

Air blows

Soufflerie d’air

Corrientes de aire

*

The service entrance of the power line

of the main unit (x3)

6-1/2”

(164mm)

22-5/8”(575mm)

12-5/8”

(320mm)

12” (305mm)

(550mm)

21-5/8”

Stringer / Traverse / Tirante

HDR130#SVClean Dry® High Speed Hand Dryer

FEATURES

• High speed hand dryer• Hygienic, touch-free operation• Durable aluminium construction• Low Operating noise 55dB(A)• Energy Efficient 390W• AC powered

COLORS/FINISHES

CODES/STANDARDS


• #SV Silver


• Certifications: Intertek/ETL• Code Compliance: NEC, CEC

TOTO Model No. HDR130#SV shall be a high speed hand dryer. The product shall provide hygienic, touch-free operation. The product shall have operating noise of 55dB(A) or less. The product shall be AC powered and consume 390 W or less.

HDR130#SVClean Dry® High Speed Hand Dryer



SPECIFICATIONS

ROUGH-IN




• Air Speed 221 mph• Unit Size 9-5/8" x 6-1/8" x 9"


(290mm x 289mm x 190mm)• Shipping Weight 10.6lb (4.8kg)

INSTALLATION NOTES


(30mm)1-1/8”

(226mm)

(150mm)

8-7/8”

(154mm)6-1/8”

(30mm)

1-1/8”

(245mm)

9-5/8”

(30mm)

1-1/8”

Keep some empty space around the product. There should be no obstructions within 30 mm from each side, 150 mm from the bottom, 30 mm from the top.

5-7/8”

Recommended mounting bracket heights from floor are as followFor general users: 49-3/4”(1265mm)For users in wheel chairs: 42-3/8”(1077mm)For children: 40”(1015mm)

Meets the American Disabilities Act Guidelines, ANSI A117.1 and CSA B651 requirements when mounted in a recessed wall where the front surface is not more than 4” (102mm) from finished wall and mounting height for U.S. is 48” (1219mm) max to blower outlet from floor, and for Canada is 47-1/4” (1200mm) max to blower outlet from floor. Check local code requirements for additional mounting height details.

(600mm)23-5/8”

Documents

CT708E(G) & CT708EV(G) - neufert-cdn.archdaily.net · CT708E(G) & CT708EV(G) Wall-Mounted Flushometer Toilet, 1.28GPF when used with High Efﬁciency Flushometer Valve FEATURES •