Cat® 3056E ATAAC Turbocharged Diesel Engine

Gross Power 112 kW/150 hp

Drum Width 2134 mm

Operating Weight (with ROPS/FOPS cab)

CS563E 12 130 kg

CP563E 11 880 kg

CS563ECP563EVibratory SoilCompactors

®

Productivity and Reliability in a Durable Package The CS563E and CP563E Soil Compactors offer high compaction performance, speed and gradeability to maximize productivity while providing exceptional reliability and durability.

EngineCat 3056E ATAAC turbochargedelectronic diesel engine delivers 112 kW (150 hp) and is built forperformance and reliability withoutsacrificing fuel economy. pg. 4

Vibratory SystemPod-style eccentric weights ensure peak compaction performance andminimal service. High dynamic forcehelps achieve density in the fewestnumber of passes. pg. 5

Operator’s Station The 500E-Series Soil Compactorsfeature excellent operator comfort andvisibility. A tilting steering column,propel lever wrist rest, grouped controlgauges and conveniently located controlswitches enhance operator productivityand reduce fatigue. Four heavy-dutyisolation mounts provide a smooth ride.Standard rearview mirrors, two front-facing and two rear-facing workinglights are provided.The steering wheel with integratedcenter horn function and steering knobhelps reduce operator fatigue. Machines with the open ROPS/FOPSplatform are surrounded by handrailsand features angled foot rests for surefooting when working on a grade. pg. 6

Gradeability and Machine ControlThe exclusive dual pump propel systemprovides a separate balanced hydraulicflow to both the rear drive axle and the front drum drive motor. This uniquedual pump propel system providesexcellent grade climbing, machinecontrol and tractive power for effectiveuse of the leveling blade option. Dual pumps also minimize drum and wheel spin-out in low tractionconditions. High working speedsincreases productivity. pg. 8

Performance and reliability you can depend on.Based upon the industry-proven reputation of the Caterpillar® 500D-Series Soil Compactors, the 500E-Series establishes new standards for productivityand reliability in the soil compaction industry. Durable Cat power train, field-proven hydraulic andvibratory systems and the world’s largest and mostdedicated dealer support system ensure the 500E-SeriesSoil Compactors will provide maximum utilization.

2

VisibilityThe one-piece sloped hood designprovides exceptional operator visibilityto the outside edge of the rear tires and to the rear of the machine forimproved safety. pg. 7

ServiceabilityThe one-piece fiberglass hood tiltsforward to allow access to the engineand daily maintenance points. Dailycheck points are accessible from groundlevel. Rear mounted cooling systemallows easy access for cleaning.The hydraulic oil cooler tilts down forconvenient access and easier cleaning.Steps to the operator’s platform swing-out for easier access to hydraulic components and oil filters.The operator’s platform tilts forward to provide convenient access to thehydraulic components. Vibratorybearing lube service interval of 3 year/3000 hour keeps maintenance to aminimum and maximizes production.The articulation hitch area featuressealed-for-life bearings that never need maintenance. pg. 10

VersatilityStandard dual amplitude expands the compactor’s application range. The large spread between high and low centrifugal force makes it easier to tailor the compactive effort to densityspecifications. pg. 5

Leveling BladeThe high traction propel system meansthe machine can go more places andpush more material with the optionalfoot-controlled leveling blade. pg. 9

Padfoot Shell KitThe optional padfoot shell kit makes the CS563E an extremely adaptablemachine when compacting cohesive or semi-cohesive materials. pg. 9

Comfort and serviceability you deserve.The operator’s station provides a comfortable and easy-to-use environment that promotes productive operation. Simplified service access and extended service intervals minimizes maintenance time and increases productive work time.

3

4

Caterpillar 3056E ATAAC Turbocharged Electronic Diesel EngineIndustry-proven Caterpillar technology designed to provide unmatched performance,reliability and fuel economy with ample power for the most demanding jobs.

Turbocharged air-to-air aftercooling. It providesimproved fuel economy by packing cooler, denser air into cylinders for more completecombustion of fuel and lower emissions.

Electronic Control Module. The Electronic ControlModule (ECM) provides improved emissions andoptimal performance through electronic timing andfuel delivery along with advanced troubleshootingand diagnostic capabilities using ElectronicTechnician (ET).

Highly-efficient combustion chamber. It increasespower while lowering fuel consumption, engineemissions and noise.

High displacement-to-power ratio. It ensures longlife and provides outstanding reliability anddurability.

Oil cooler. The large oil cooler reduces oildeterioration and varnishing of internal components.Allows for 500 hour engine oil change intervals.

Dual Pump Propel SystemSuperior tractive effort and gradeability for outstanding productivity in demanding applications.

Dual propel pumps. Dual propel pumps provideseparate, balanced hydraulic flow to the rear wheelaxle and the drum drive motors. Provides superiorgradeability on steep slopes and increases tractiveeffort in loose or poor underfoot conditions.

Limited slip differential. It provides balancedtractive effort and smooth torque transfer to bothrear wheels.

Speed ranges. Two speed ranges for versatileoperation. Low speed range for vibratory operationand maximum torque when climbing grades. High speed range moves machine quickly overlonger distances.

Valves. Flushing valves in each propel circuit helpskeep hydraulic oil cool and clean for maximumsystem efficiency.

1 Dual Propel Pumps2 Caterpillar 3056E ATAAC Engine3 Limited Slip Differential4 Rear Wheel Drive Motor5 Drum Drive Motor

1

2

3

4

5

5

1

4

23

Vibratory SystemThe pod-style vibratory system, delivers superior compactive force while offeringserviceability advantages.

Pod-style weight housings. They are assembled and sealed at the factory to ensure cleanliness, longerbearing life and easier field exchange or service.

Dual amplitude. Dual amplitude works efficiently ina wider range of applications. High or low amplitudeis selected from the operator’s station.

Vibratory frequency. Vibratory frequency of 31.9 Hz for high compaction results. Optional variablefrequency control available with a frequency rangefrom 23.3-31.9 Hz allows frequency to be bettermatched to varying job conditions.

Heavy-duty bearings. Large heavy-duty bearings for the eccentric weight shaft designed for highcompactive forces.

Service interval. 3 year/3000 hour vibratory bearinglube service interval for reduced maintenance.

Isolation mounts. Improved isolation mounts allowmore force to be transmitted to the ground and lessvibration to the drum yoke.

1 Pod-style Weight Housings2 Patented Eccentric Weights3 Heavy-duty Bearings4 Isolation Mounts

Patented Eccentric WeightsReliable dual amplitude selection and innovative design ensure precise performance.

Amplitude selection. Positive amplitude selection is accomplished when the steel shot is repositionedinside the hollow eccentric weight. Direction ofweight shaft rotation determines amplitude level.

High reliability. High reliability since there is nochance of the high-strength spherical steel shotwedging together. System reliability is superior toswinging mechanical weights and is also quieterduring starts and stops.

Simplified control. Simplified control from the operator’s station with a selection switch on the operator’s console.

Longer service life. No heavy weights to slamtogether, no metal fragments to contaminate the bearing lubrication system.

High Amplitude Low Amplitude

6

Operator’s StationErgonomically designed for maximum operator productivity while offering excellentvisibility and unmatched comfort.

Seat. The comfortable and durable seat has adjustablefore/aft position, bottom cushion height, suspension stiff-ness and flip-up arm rests with a 76 mm wide retractableseat belt.

Operator’s station. The isolated operator’s station withfour heavy-duty rubber mounts limits machine vibrationtransmitted to the operator’s station.

Floor mat. Rubber floor mat provides sure footing andhelps further isolate the operator from machine vibrationand noise.

Operational gauges. Steering console and instrumentationgauges are infinitely adjustable within the tilt range to the desired position of the operator. Entire console tilts for simple entrance and exit.

Instrument panel. Machine gauges are located on theadjustable front steering column for easy reference duringmachine operation. The instrument panel contains the fuelgauge, vibrations per minute (VPM) meter (optional) and a nine-light LED fault indication panel.

Indication panel. Fault indication panel is a three-levelwarning system to alert the operator to abnormal machineconditions with a visual warning and action alarm.

Single lever control. The single lever control for propel and vibratory On/Off provides simple and low effort operation. A padded adjustable wrist restprovides comfort.

Control panel. The control panel with grouped switchesputs all controls within easy operator reach.

Storage. Convenient storage compartment for storingoperator’s personal items.

7

ROPS/FOPS CabOptional cab can increase machine utilization in extreme environment conditions and the ergonomic design emphasizes comfort, visibility and easy operation.

Cab. The cab is a spacious and comfortable workenvironment that includes large windows, more interiorroom with storage areas, better ergonomics and a dramatic reduction in interior sound levels.

Windshield. Full-length glass windshield providesexceptional visibility to the drum and optional leveling blade.

Mirrors. Two exterior rear view mirrors, front and rearworking lights included with cab.

Wipers. Windshield wipers on front and rear windowsallow clear vision in adverse conditions.

Windows. Slide-open side windows for cross ventilation.

Climate control. The climate control with standard heaterand defroster for maximum operator comfort. Optional airconditioning helps keep the cab cool and comfortable.

One-Piece Sloped Hood DesignThe one-piece sloped fiberglass hood design provides excellent service access andexceptional operator visibility.

Visibility. The visibility to the tire edges and rear ofmachine is exceptional. The sloped hood allows theoperator to see obstacles measuring 1 meter high located1 meter to the rear of the machine. Excellent visibilityincreases productivity when working near obstructions or maneuvering around the job site.

Lockable engine hood. The one-piece lockable enginehood opens quickly and easily with the use of gas struts toprovide unrestricted access to the engine, cooling systemand all service points.

Sound levels. Low sound levels for the operator and theground crew due to the one-piece engine hood and revisedcooling air flow through the rear mounted radiator.

8

Padfoot Drum and ScrapersPadfoot drums provide superior performance when compacting clays. Heavy-duty scrapersbreak materials away from the drum surface to allow for deep penetration of the padfeet.

Padfoot drum. The padfoot drum has 140 pads welded onthe drum in a chevron arrangement.

Pad measurement. Each pad is 127 mm high and has apad face surface area of 89.4 cm2 to achieve high groundcontact pressure for maximum compaction.

Clean themselves. The pads are involuted to walk out of the lift without fluffing or “kicking up” the soil aroundthe pads. Pads are tapered to help clean themselves.

Heavy-duty scrapers. The heavy-duty scrapers mountedon the front and rear of the drum are individuallyadjustable and replaceable. Helps to reduce excessivematerial build up between the pads.

Gradeability and Machine ControlThe exclusive dual pump propel system, proven reliable on 500D-Series Soil Compactors,provides superior performance, machine control and exceptional grade climbing capability.

Propel pump system. The two propel pump system hasdedicated pumps to drive the heavy-duty, high-torque rear wheel and drum motors independently. Should thedrum or wheels begin to spin, there is always hydraulicflow to the non-spinning motor, allowing continuoustractive effort.

Controllability. Controllability is another feature of dualpropel pumps. The operator has complete machine controlto stop, maintain machine position and change directionswhile on a slope. This feature is especially useful on steepslopes and loose underfoot conditions.

Pressure valve. The pressure override (POR) valve limitsmaximum system pressure by de-stroking the propelpumps. This reduces pump flow while maintaining system pressure. This lowers the horsepower draw while accelerating the machine which saves fuel.

9

Padfoot Shell KitOptional padfoot shell kit expands the application range of the CS563E to work in eithercohesive or semi-cohesive material.

Versatility and utilization. Expands machine versatilityand utilization while providing a simple and cost-effectivesolution for jobs that may require both padfoot andsmooth drum compaction.

Bumper. The bumper provides adjustable scraper teeth.The bumper can also accept the optional leveling bladewhich increases machine versatility even further.

Padfoot shell halves. Padfoot shell halves can be quicklyand easily installed or removed in about an hour with theuse of an approved lifting device.

Leveling BladeOptional leveling blade increases machine versatility and utilization, plus greatly enhances productivity.

Machine versatility and utilization. Expands machineversatility and utilization for use in material knockdown,site leveling, trench backfilling and light dozingapplications.

Blade control. Blade position is controlled by operator’s right foot, leaving the operator’s hands free tocontrol machine propel and steering.

Dual propel pumps. The dual propel pumps provide plenty of power and tractive effort for effective blade use without drum spin.

Cutting edges. Two-piece reversible and replaceable cutting edges increase edge service life and reducereplacement costs.

Curb and obstruction. High mounting point providessuperior curb and obstruction clearance.

Blade. No special permits for transporting with a bladewidth of 2500 mm.

10

Reliability and ServiceabilityThe 500E-Series Soil Compactors continue to provide exceptional reliability and serviceability that you’ve come to expect from Caterpillar.

Indicators. Visual indicators allow easycheck of engine coolant, hydraulic oiltank level and air filter restriction.

Swing-out steps. Swing-out steps alloweasy access to hydraulic components andoil filters.

Operator’s station. The operator’s stationtilts forward to allow convenient accessto the hydraulic pumps.

Cooling system. The rear mountedcooling system provides easy access for cleaning. Hydraulic oil cooler tiltsrearward for additional access to theradiator.

Bearings. Sealed-for-life bearings in the articulation hitch never need to be greased.

Oil. 500 hour engine oil change interval.

Service interval. 3 year/3000 hourvibratory bearing lube service interval for reduced maintenance.

Hydraulic test. Quick connecthydraulic test ports simplify systemdiagnostics.

Ecology drains. Ecology drainsprovide an environmentally safermethod to drain fluids. They areincluded on the radiator, engine oilpan, hydraulic and fuel tank.

Simple fluid collection. S•O•SSM

(Scheduled Oil Sampling) ports allowfor simple fluid collection of engineand hydraulic oil.

Hose routing. Secure hose routingwith polyethylene mounting blocks to reduce rubbing and increase service life.

All-weather connectors. Nylonbraided wrap and all-weatherconnectors ensure electrical systemintegrity. Electrical wiring is color-coded, numbered and labeled withcomponent identifiers to simplifytroubleshooting.

Caterpillar batteries. Maintenance-free Caterpillar batteries are protectedby bolt-on covers in the rear of themachine on both sides. Caterpillarbatteries are specifically designed for maximum cranking power andprotection against vibration.

Product Link. The machine is ProductLink wire-ready. The CaterpillarProduct Link System (CPLS) ensuresmaximum uptime and minimum repaircosts by simplifying tracking ofequipment fleets. Provides automaticmachine location and hour updates. Can be obtained through your localCaterpillar dealer.

The one-piece fiberglass hood tiltsforward for exceptional access to the engine and cooling system. Daily service points are accessible from ground level and are grouped on one side of the machine.

11

Engine

Four-stroke cycle, six cylinderCaterpillar 3056E ATAAC electronicturbocharged low emissions dieselengine.

Ratings at 2200 rpm kW hp

Gross power 112 150Net Power

EEC 80/1269 107 143ISO 9249 107 143

Net power advertised is the poweravailable at the flywheel when theengine is equipped with fan, air cleaner,muffler and alternator. No deratingrequired up to 3000 m altitude.

DimensionsBore 100 mmStroke 127 mmDisplacement 6 liters

Dual-element, dry-type air cleaner withvisual restriction indicator, thermalstarting aid and fuel/water separator are standard.

Transmission

Two variable displacement pistonpumps supply pressurized flow to twodual displacement piston motors. Onepump and motor drives the drum propelsystem while the other pump and motordrives the rear wheels. The dual pumpsystem ensures equal flow to the drivemotors regardless of the operatingconditions. In case the drum or wheelslose traction, the other motor can stillbuild additional pressure to provideadded torque.The drive motors have two swashplatepositions allowing operation at eithermaximum torque for compaction andgradeability or greater speed for movingaround the job site. A rocker switch atthe operator’s console triggers anelectric over hydraulic control to changespeed ranges.

Speeds (forward and reverse)CS563E

Low Range 5.7 km/hHigh Range 11.4 km/h

CP563ELow Range 5.8 km/hHigh Range 11.6 km/h

Gradeability with or without vibration(subject to underfoot conditions) 55%

Brakes

Service brake featuresClosed-loop hydrostatic drive systemprovides dynamic braking duringoperation.

Secondary brake features*Spring-applied/hydraulically-releasedmultiple disc type brake mounted on the drum drive gear reducer. Secondarybrakes are activated by: a button on the operator’s console; loss of hydraulicpressure in the brake circuit; or whenthe engine is shut down. A brakeinterlock system helps prevent drivingthrough the secondary brake.* All machines sold within European Union are

equipped with a brake release pump which

allows the manual release of the secondary

brake system for towing the machine.

Braking system meets EN 500.

Steering

A priority-demand hydraulic power-assist steering system provides smoothlow-effort steering. The system alwaysreceives the power it needs regardlessof other hydraulic functions.

Minimum turning radius:Inside 3680 mmOutside 5810 mm

Steering angle(each direction) ± 34°

Oscillation angle(each direction) ± 15°

Hydraulic systemTwo 76 mm bore, double-actingcylinders powered by a gear-type pump.

Final Drives and Axle

Final drive is hydrostatic with gearreducer to the drum and hydrostaticwith differential and planetary gearreduction to each wheel.

AxleHeavy-duty fixed rear axle with alimited slip differential for smooth andquiet torque transfer.

Tires587 mm x 660 mm (23.1" x 26")

CS563E 8-ply flotationCP563E 10-ply traction

Ballasted with 30-35% calcium chloride/water

solution, approximately 430 liters per tire.

Sound

Operator Sound. The operator soundlevel measured according to theprocedures specified in ISO6394 is 81 dB(A), for cab offered byCaterpillar, when properly installed and maintained and tested with thedoors and windows closed.

Exterior Sound. The labeled spectatorsound power level measured accordingto the test procedures and conditionsspecified in 2000/14/EC is 111 dB(A).

CS563E/CP563E specifications

12 CS563E/CP563E specifications

Vibratory System

Drum width 2134 mmDrum shell thickness

CS563E 30 mmCP563E 25 mm

Drum diameterCS563E 1524 mmCP563E 1295 mm

Drum diameter over pads (CP563E only) 1549 mmPads (CP563E only)

Number of pads 140Pad height 127 mmPad face area 89.4 cm2

Number of chevrons 14Eccentric weight drive HydrostaticWeight at Drum (with ROPS/FOPS cab)

CS563E 6850 kgCP563E 6160 kg

Static Linear Load* 32.2 kg/cmFrequency

Standard 31.9 HzOptional 23.3-31.9 Hz

Nominal AmplitudeHigh 1.7 mmLow 0.85 mm

Centrifugal Force at 31.9 Hz Maximum 266 kNMinimum 133 kN

* Meets NFP 98736 class: VM3

Frame

Fabricated from heavy gauge steel plateand rolled sections and joined to the drum yoke at the articulation pivot.Articulation area is structurallyreinforced and joined by hardened steel pins. One vertical pin provides asteering angle of ± 34° and a horizontalpin allows frame oscillation of ± 15°.Safety lock prevents machinearticulation when placed in the lockedposition. Sealed-for-life hitch bearingsnever need maintenance. Frame alsoincludes tie-down points for transport.

Instrumentation

Electronic Control Module (ECM)constantly monitors condition of theengine. Alerts the operator if a problemdoes occur with three levels of warning.Warning system includes: Action Alarmand Lamp, Low Engine Oil Pressure,High Engine Coolant Temperature,High Hydraulic Oil Temperature, Low Charge Pressure, Starting Aid and High Combustion Air Temperature.Instrumentation also includes anAlternator Malfunction Light, Check Engine/Electrical Fault, Service Hour Meter and Fuel Gauge.

Operator and MachineProtective Equipment

Backup Alarm – 107 dB(A) alarmsounds whenever the machine is in reverse.

Forward Warning Horn – located on the front of machine to alert groundpersonnel.

Seat Belt – 76 mm wide seat belt is standard.

Electrical

The 24-volt electrical system consists of two maintenance-free Cat batteries,electrical wiring is color-coded,numbered, wrapped in vinyl-coatednylon braid and labeled with componentidentifiers. The starting system provides750 cold cranking amps (cca). The system includes a 55-ampalternator.

Service Refill Capacities

Liters

Fuel tank 300Full fuel capacity 330

Cooling system 26Engine oil with filter 12Eccentric weight housings 26Axle and final drives 18Hydraulic tank 64Filtration system (pressure type)

Propel 15 micron absoluteVibratory 15 micron absolute

Operating WeightsWeights shown are approximate and include lubricants, coolant, full fuel andhydraulic tanks and a 80 kg operator.

CS563E CP563Ekg kg

Open platform 11 630 11 335ROPS/FOPS canopy 11 830 11 555ROPS/FOPS cab 12 130 11 880

equipped with shell kit 13 750 –equipped with leveling blade* 12 120 12 555equipped with leveling blade and shell kit* 13 740 –

Weight at DrumROPS/FOPS cab 6850 6160

* When equipped with leveling blade, the CS563E yoke cross tube and front bumper are not ballasted

13CS563E/CP563E specifications

DimensionsAll dimensions are approximate.

CS563E CP563Emm mm

A Overall length 5760 5760B Length with blade 6300 6300C Overall width 2290 2290D Drum width 2130 2130E Width with blade 2500 2500F Blade height 680 680G Blade cutting depth 127 120H Drum shell thickness 30 25

CS563E CP563Emm mm

J Drum diameter 1524 1295Drum diameter over pads – 1549

K Height at ROPS/FOPS canopy 3060 3070Height at ROPS/FOPS cab 3070 3070

L Wheelbase 2900 2900M Ground clearance 448 456N Curb clearance 497 505

Inside turning radius 3680 3680Outside turning radius 5810 5810

CP563E

N M

H

F

G

K

ABL

J

CE D

Service capability. Most dedicateddealer support system to ensure fastservice whether at the dealer’s shop orin the field by trained technicians usingthe latest tools and technology.

Parts availability. Most parts ondealer’s shelf when you need them.Computer-controlled, emergency searchsystem backup.

Parts stock lists. Dealer helps you planon-site parts stock to minimize yourparts investment while maximizingmachine availability.

Literature support. Easy-to-use partsbooks, operation and maintenancemanuals and service manuals to helpyou get maximum value from yourCaterpillar equipment.

Remanufactured parts. Pumps andmotors, pod-style weight housings,engines, fuel system and chargingsystem components available fromdealer at a fraction of new part cost.

Total Customer Support System

Machine management services.Effective preventive maintenanceprograms, cost-effective repair options,customer meetings, operator andmechanic training.

Flexible financing. Your dealer canarrange attractive financing on theentire line of Caterpillar equipment.Terms structured to meet cash flowrequirements. See how easy it is to own,lease or rent Cat equipment.

1414

Estimated Production

Application

Sand, Clayey or Silty Sand, Mine Tailing

Clay, Sandy or Silty Clay, Stabilized Clay

Silt, Sandy or Clayey Silt, Coal, Ash, Solid Waste

Base Aggregate, Gravel, Crushed Rock, Stabilized Base

Layer Thicknessmm

150-300300-450450-600

150-300300-450450-600

150-300300-450450-600

150-300300-450450-600

Smooth Drum Padfoot Drum

● ▲ ❒ ❒

▲ ● ▲ ❒

❒ ▲ ● ❒

▲ ▲ ▲ ●

❒ ▲ ▲ ▲

❒ ❒ ▲ ❒

▲ ▲ ❒ ●

▲ ❒ ❒ ▲

❒ ❒ – ▲

▲ ▲ ● ❒

❒ ▲ ▲ ❒

– ❒ ❒ ❒

CS563E CS573E CS583E CP563E

❒ ▲ ●Good Better Best

Machine Selection

Padfoot Drum

Number of Pads

Pad Height

Weight at Drum

Max. Amplitude

Shell Kit

120

90 mm

7475 kg

1.2 mm

140

127 mm

6075 kg

1.7 mm

Shell Kit Performance Performance Ranking

Shell Kit Performance

Heavy Clay

Sandy Clay

Silt with Clay

Slopes/Trenches

Thick Layers

● ❒

❒ ●

❒ ●

● ❒

● ❒

1100

1000

900

800

700

600

500

400

300

200

100

0CS563E CS573E CS583E

100%

98%

95% 610

765 765

535

305345

190

610

385

Productivity Comparisons

Cubi

c M

eter

s Pe

r Hou

r% Compaction of Standard Proctor

150 mm Crushed Limestone Base

Results are similar for padfoot drums.

Results may vary for different applications.

Less Kneadingbetter for silt

Less Penetrationbetter for silt and sandy clay

Higher Ground Pressurebetter for sandy clay

Smaller Drum Movementbetter for silt and clay

Shell KitPadfoot Drum

Depthmm

Surface

Shallow

Deep

Density%

>98

95-98

90-95

0-500

500-3000

>3000

150/300 mm Layers

190/380 m3/h

345/610 m3/h

610/1150 m3/h

Based on depth of fill below final grade (surface)

Based on final compacted thickness of layer

Density spec. is based on Standard Proctor Test

15CS563E/CP563E specifications

Optional EquipmentOptional equipment may vary. Consult your Caterpillar dealer for specifics.

Roll Over Protective Structure/Falling Object Protective Structure(ROPS/FOPS) canopy is a two-poststructure that bolts directly onto flangeswelded to the operator platform.Includes two front-facing and two rear-facing working lights, handrails and arear view mirror. The structure meetsISO 3449-1992 and ISO 3471-1994.

ROPS/FOPS Cab includes a clothsuspension seat, one access door, tintedsafety glass windows, electric wipersfront and rear, heater/defroster, twovertically sliding side windows forventilation, two exterior rear viewmirrors, two front-facing and two rear-facing working lights, interior domelight, coat hook. Cab can be orderedwith or without air conditioning. Cab is fully EROPS rated and meetsISO 3449-1992 and ISO 3471-1994.

Sun Visor for the front windshield canbe installed on machines equipped witha ROPS/FOPS cab.

Roll-Down Sun Screen for the rearwindow can be installed on machinesequipped with a ROPS/FOPS cab.

Rear View Mirrors are available forinternal use on machines equipped witha ROPS/FOPS cab or external use onmachines equipped with a ROPS/FOPScanopy.

Transmission Guard consists of a heavyplate which covers the rear axle, axledrive motor and input gearbox.

Cab Lift Cylinder is available andprovides a hydraulic cylinder to raiseand lower the operator's platform or cab.

Vibration Auto On/Off. Vibration systemswitches on/off automatically.

Variable Frequency is an electronicdisplacement control on the vibratorypump that is operated by a dial on theoperator’s station. Engine rpm remainsconstant. Frequency range from 23.3-31.9 Hz makes it easier to matchfrequency, amplitude and working speedto job conditions. Includes the vibratorygauge.

Vibratory Gauge is mounted on theconsole in front of the operator anddisplays the actual vibratory systemfrequency. (Standard with the variablefrequency option.)

Rotating Beacon includes an amberbeacon and mount that can be attachedto machines with ROPS/FOPS canopyor ROPS/FOPS cab.

Polyurethane Drum Scrapers for the CS563E provide a front and rear scraperfor continuous contact with the drumsurface and replaces the standard steelfront scraper.

Two-piece Padfoot Shell Kit bolts ontothe smooth drum CS563E and features90 mm high pads. Includes specialbumper.

Smooth Drum Rear Steel Scrapermounted at the rear of the drum.

Padded Drum Rear Scrapers help keepmaterial from building up on the drum.

Speedometer

Recording Module provides a visualgauge for reading worktime, machinespeed, distance covered and amplitudeselection.

Compaction Indicator CI 010 includesLED panel indicating compaction levelwith integrated LCD screen displayingtravel speed and compaction metervalue. Also Includes hand-held printer.

Compactiometer ALFA 022R includescompaction meter value dial, frequencymeter dial and resonance meter valuedial.

Leveling Blade for the CS563E and CP563E is designed to bolt onto thedrum yoke. Complete unit includesheavy-duty blade, push arms,reversible/replaceable cutting edges,replaceable wear plates, a heavy-dutyhydraulic lift cylinder and control valve.Moldboard is constructed of heavy-dutysteel. Blade measures 2500 mm wideand 680 mm high. Maximum depth ofcut is 76 mm.

Padded Drum Conversion Kit(CS563E only) is interchangeable with the smooth drum. Two options areavailable. First option includes all drumcomponents including hydraulic motor,brackets, gear and support boxes, shell,mounts, brackets and pods, front bumperand scrapers. Second option includesminimal drum components. Shell, driveplate, front bumper and scraper. Paddeddrum dimensions and performance arethe same as on the CP563E.

Smooth Drum Conversion Kit(CP563E only) is interchangeable withthe padded drum.Two options areavailable. First option includes all drumcomponents including hydraulic motor,brackets, gear and support boxes, shell,mounts, brackets and pods, front bumperand scrapers. Second option includesminimal drum components. Shell, driveplate, front bumper and scraper. Smoothdrum dimensions and performance arethe same as on the CS563E.

Spare Tire with Rim is available for boththe flotation tread and the traction tread.

CS563E and CP563E Vibratory Soil Compactors

HEHG9943-01 (02/2007) hr

®

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web atwww.cat.com

Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Caterpillar dealer for available options.

© 2007 Caterpillar -- All rights reserved

CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.