Member of Unitherm Cemcon Group

your expertsfofof r burners and combustors

CS Imagefolder E 09-2012end 28.09.12 09:18 Seite 1

Member of Unitherm Cemcon Group

A young company – with many years of experience.

CS COMBUSTION SOLUTIONS is a team of senior specialists dedicated to dependability and innovation the field of combustion technology.

CS is a member of the UNITHERM-CEMCON Group, which is successfully constructing burners, kilns- and furnaces since itsfounding in 1946. CS can rely on UNITHERM’s recourses andexperience in boiler and rotary kiln burner construction.

The CS COMBUSTION SOLUTIONS team has over 20 years of experience in engineering, supplying and commissioning of vertical and horizontal burners and combustors for:l Sulphur, spent acid and acid gasl Waste gas and waste airl Waste waterl Hazardous and special waste liquidsl Pasty waste fluids

your expertsfofof r burners and combustors

CS Imagefolder E 09-2012end 28.09.12 09:18 Seite 2

CS COMBUSTION SOLUTIONSengineers and supplies burners for special applications with performance range between 1 and 90 MW.

The burners are costumized and designed according to customizer needs and requirements.The SWB Burner operates on a variety of standard and special fuels which can be directly injected simultanously into the burner.

Field of application:l Industrial boilersl Rotary kilnsl Fluidized bedsl Combustors, static incineratorsl Furnacesl O2-applications

Fuels:l Standard fuels as NG, diesel fuel, HFO, …l Spent acid, acid & black liquorl Coke gas, lean gas, synthesis gas, H2S-gas, tail gasl Sulphur, brominates & nitrogenous wastel Waste water, solvent, chlorinated & halogenated fluids

Features:l Various materials for the burner (carbon steel, stainless steel, alloy, …)l According to EN, ASME & GOST standardsl High temperature- & high pressure applicationsl Various nozzle systems for the best available atomization

burnerfofof r every application an individual solutttion

CS Imagefolder E 09-2012end 28.09.12 09:18 Seite 3

CS COMBUSTION SOLUTIONSis your expert for the thermaloxidation of liquids, gases and powdered solids derived from byproducts in the refinery, petro-chemical, chemical & pharmaceutical industries.

CS delivers combustors for the following applications:l Sulfuric acid productionl SO2-Productionl Spent acid regenerationl Thermal disposal of waste gasesl Thermal disposal of hazardous waste liquidsl Waste water disposal

The team of CS has 20 years experience in design and supply of thermal oxidizers and firing systems. CS provides you with the full range of engineering and supply services consisting of:l Problem evaluationl Layout and design of combustors including firing system and lancesl Static calculations, CFD-simulationsl Detailed engineering, selection of the lining materialsl Manufacturing according regulationsl Transport, erection and commissioning

CS is able to supply combustors and incinerators for thermal oxidation for the following (waste) fuels like:l Sulphur, spent acid & acid gas (up to 20 % SO2-content in the flue gas)l Chlorinated waste gas & waste airl Waste waterl Tallowl Hazardous & special waste liquids with high content

of chlorine, salts, bromine & fluorinel Low NOx-Applications

Member of Unitherm Cemcon Group

combustorsfofof r thermal oxidation

CS Imagefolder E 09-2012end 28.09.12 09:18 Seite 4

CS COMBUSTION SOLUTIONS selects and engineers the optimal atomizing system for the specified application. To ensure the optimal proportion between atomizing results and media consumption, CS works with the proven dual fluid premix-nozzle, pressure atomizer nozzle and ultrasonic nozzle systems.

CS offers lance / nozzle systems for the SWB burner and for the direct injection of fluids into our incinerators.

Additionally CS offers nozzles for the following applications:l Ammonia injection systems for SNCR-plantsl Fluegas cooling & quenching systemsl Lime milk injection for semi-dry desulfurizationl Process applications for food- & chemical industries

Ultrasonic atomizing nozzle type CS For highly viscous and polluted media as well as standard fuels.Dual fluid nozzle – mixture of fluid and atomizer outside the nozzle.Mass flow up to 10.000 kg/h.

Premixing nozzle type SLFor clean and moderate polluted media. Dual fluid nozzle – mixture of fluid and atomizer in the mixing chamber.Very low requirement of atomizer (approx. 4–6 %). Mass flow up to 10.000 kg/h.

Waste nozzle type DDM-XFor highly viscous and polluted media. Dual fluid nozzle – mixture of fluid and atomizer inside the nozzle. No built in components in the fluid duct and nozzle. Mass flow up to 10.000 kg/h.

Pressure atomizing nozzle type ZLFor clean media. Single fluid nozzle – no atomizer necessary. The nozzle can be adjusted during operation. Max. control range 1:8.Mass flow up to 15.000 kg/h.

injection systemsfofof r optimal atomizing perfofof rmance

CS Imagefolder E 09-2012end 28.09.12 09:18 Seite 5

Member of Unitherm Cemcon Group

sludge lancefofof r high viscosity slurries

CS COMBUSTION SOLUTIONS has developed a special slurry-lance for use with the injection of high viscosity slurries. With its’ simple and robust construction the lance is primarily used for the injection of highly viscous and pasty slurries.

Field of application:l Circulating fluidized bedl Rotary kilnsl Municipal waste boilerThe atomizing of the waste fuels will be done by means of steam or compressed air.Thereby the sludge will be blown into little bits, and burned in the furnace.

Fuels:l Sewage sludgel Oil sludgel Pasty wastes from the petrochemical and chemical industriesThe sludge lance uses a central pipe, without any neck or rebound in the diameter.Thereby it will be ensured that no caking or formation of bottlenecks can happen,and the unimpeded hauling of the sludge is possible. According to the field ofapplication it is possible to furnish the nozzle with special coatings to raise thedurability.

Features:l Different possible nozzle and lance materialsl Removable during operation by means of a gate valve and glandl Atomizing with steam or compressed air

CS Imagefolder E 09-2012end 28.09.12 09:18 Seite 6

engineering & servicetailor made concepts fofof r each requiremment

CS COMBUSTION SOLUTIONSsupports you in engineeringand evaluating your projects. CS develops tailor made concepts for your special problems.

You can expect the following engineering & service features from CS:l Evaluation & optimization of existing combustion processesl Implementation of procedures for saving on operating costsl Capacity increase with existing combustion plantsl Increasing plant availabilityl Consulting for plant operators of combustion facilitiesl Basic- & detail engineering of burners, combustors and incineratorsl Engineering for reconstruction, revamp and boosting of existing plantsl CFD-Simulationl Commissioning & maintenance

CS Imagefolder E 09-2012end 28.09.12 09:18 Seite 7

CS Combustion Solutions GmbHSimmeringer Hauptstrasse 24

A-1110 Vienna · AustriaT +43 1 740 40 2818F +43 1 740 40 2815sales@comb-sol.com

www.comb-sol.com

www.comb-sol.comyour experts fofof r burners and combustors

CS Imagefolder E 09-2012end 28.09.12 09:18 Seite 8