Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
CS-3060 / CS-2560
WO
RK
GR
OU
P
MF
P
1. Introduction
II. Product Positioning
III. Product Overview
IV. Yields
V. Product Configuration
VI. Technology
VII. Features
VIII. Connectivity
IX. Print
X. Scan / Send
XI. Copy
XII. Fax / Send
XIII. Product Options
XIV. Solutions
XV. Reliability
XVI. Summary
XVII. Trademarks
T A B L E O F C O N T E N T S
K M - 3 0 6 0 / K M - 2 5 6 0 P R O D U C T G U I D E 2
I N T R O D U C T I O N
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 3
Copystar is pleased to introduce the New CS-3060 / CS-2560
The New CS-3060 / CS-2560 are the latest addition to Copystar’s line of Monochrome
Multifunctional Devices. The new CS-3060 / CS-2560 come standard with Network Print
and Color Scan and Send capabilities, which will accommodate the needs of most small
to mid-size business workgroups.
With the Copystar CS-3060 / CS-2560, customers can choose whether they require a
30PPM devices or a 25PPM device, based on their print, scan and copying needs.With
the Copystar CS-3060 / CS-2560 and it’s abilities to Network Print and Network Color
Scan, customers’ can also reduce equipment redundancy, such as locally attached
flatbed scanners and printers by consolidating all of these requirements using a centrally
located CS-3060 / CS-2560 MFP. .
The CS-3060 / CS-2560 will provide customers with a wider range of choices when
deciding on which product will best fit their business structure, and are a welcome addition
to Copystar’s Monochrome Multifunctional Product Line.
P R O D U C T P O S I T I O N I N G
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 4
The new CS-3060 and the new CS-2560 are products intended for the workgroup,
where printing, scanning and faxing are part of the daily workflow process and require
an MFP that is highly reliable and easy to use.
The CS-3060 and the CS-2560 standard features and functionality, when combined
with Copystar’s advanced user-friendly software solutions, allow users to easily network
print, network scan or network fax from the desktop or the MFP. For the IT administrator,
the advance software monitoring tools will allow administrators to control all of the
business processes across their network from a central location, easily and effectively.
Copystar gives businesses the choice, on whether they need a 30 page per minute
device or a 25 page per minute device, without losing any of the features and
functionality that are normally found on more expensive high-end MFPs. Copystar also
designed the CS-3060 and the CS-2560 around Kyocera’s Long Life components,
making the CS-3060 and CS-2560 cost effective to operate and the ideal choice for the
any workgroup.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 5
P R O D U C T O V E R V I E W
The CS-3060 and the CS-2560 are Workgroup Multifunctionals with standard
Network Print, Network Color Scan, Optional Fax/Network Fax/Internet Fax,
Stackless Duplex, 500x2 Paper Drawers and 200 Sheet MPT. Standard/Maximum
512MB/1GB shared memory, Standard 80GB HDD Optional 75 Sheet Reversing
Automatic Document Processor (RADF), Optional Paper Handling and Finishing.
• Single Board Architecture
• Multi Task Operation
• Single Laser Writing
• Amorphous Silicon (ASi) Drum
• Monocomponent Toner
• 600 dpi, 256 Levels of gray
• Fast 1200 Mode Print Resolution
• Scan Once Print Many
• Multi Send Functions
• Network Authentication
• Standard Stackless Duplex
• Section 508 Compliant• RoHS Compliant
• Energy Star Compliant
Productivity & Ease of Use
• Covers
• Booklet Mode (Copy)
• Page Numbering
• Continuous Scan/Job Build
• 1,000 Account Codes
• User/ Department Name
• Paper Size
• Integrates with KMnet Admin
• Integrates with KM-NET for Accounting
• Warmup of 15 seconds or less
• Fast FCOT- 4.7 Seconds
• 50 SPM/OPM Monochrome at 300 dpi
• 15 SPM/OPM Color
• APS/AMS/AE/AS
• Auto Start
• Job Interrupt
• Image Rotation
• 50 Job Programs (Copy/Send)
• Copy/Send Shortcuts
• Color Wide Touch Screen Interface
• Help/Animated Guidance
• Multiple Language Selection
• Memory Gauge
• Job Status
• 1-999 Copy Selection
• Job Finish Notice (Copy/Send)
Technology
Output Speeds
Memory Management
Publishing
Reports
Media Type 2560 3060
Letter 25 30
Letter R 17.5 22
Legal 12.5 15
Ledger 12.5 15
• Standard 512MB RAM
• Maximum 1GB RAM
• Standard 80GB Multipurpose HDD
• Maximum 1GB RAM
via 512MB x 2 100 Pin SDIMMs
• Standard Compact Flash Slot (Type 1)
Document Box
• Custom Box
• Job Box
• Removable Memory Box (USB Host Print)
• Fax Box (Requires Opt. Fax System)
P R O D U C T O V E R V I E W
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 6
• Auto, Text, Photo, Mixed, ECO and Manual
• 5R/5E Fixed Ratios
• 25%-400% Zoom
• XY Zoom
• 110 lb. Index via MPT
• Positive/Negative Reverse
• Mirror Image
• Form Overlay
• Erase Modes
• Split Copy
• Mixed Size processing
• Cover Mode
• Repeat Copy
Paper Handling
Image Quality & Versatility
• Optional 75 Sheet RADF (DP-670)
• Standard 3-way 1,200 Sheet Paper Supply
• 500 x 2 Drawers
• 200 Sheet Multi-purpose Tray (MPT)
• Up to 28 lb. Bond via Paper Drawers/Decks
• Auto Tray Switching support
• Standard Stackless Duplex
• 1:2, 2:2, 2:1, Book:2
• Optional Paper Handling
• 500 x 2 Sheet Paper Drawers (PF-670)
Finishing
• Optional 1,000 Sheet Finisher (DF-730)
• 30 Sheet Single-position Edge Staple
• 20 Sheet Legal/Ledger
• Requires Attachment Kit (AK-670)
• Optional 500 Sheet Internal Finisher (DF-670)
• 30 Sheet Single position staple
• Offset shift
• Optional Job Separator (JS-670)
• 100 Sheet Tray capacity
• PowerPC750/ 400MHz Processor
• Shared Memory Resources
• Fast 1200 Print Mode
• PDL/Emulations: PRESCRIBE, PCL 6 (XL, 5e),
KPDL3 (PS3), KCGL (HP-GL/2), Diablo 630, IBM
ProPrinter X24, Epson LQ850, Line Printer
• Font Support:
• 80 Outline Fonts for PCL XL/5e
• 80 Outline Fonts for KPDL
• 1 Bitmap Font
• Driver Support
• KX Driver for Windows®
• PPD for MAC
• PPD for Linux/UNIX
• Certified Uni Driver
• Windows® 64-bit Drivers
• Operating System Support
• Windows® 95/98/Me/
NT4/2000/XP/2003/Vista
• Novell 3.x/4.x/5.x/6.x
• Mac OS 8.x/9.x/10.x
• UNIX
• Protocol: TCP/IP, IPX/SPX, AppleTalk, NetBEUI
• Standard Interfaces
• 10/100BaseTX
• High Speed USB 2.0
• USB Host Interface (2)
• Expansion Slot (2)
• Optional Fax System (M) x 2
• Web Interface: Kyocera Command Center
• Utilities: KMnet Admin, KM-NET for Accounting,
PDF Direct Print
Standard Network Print
Standard Network Scan
• Color and Monochrome Scanner
• Resolution: 200,300,400,600 dpi
• Scan Speed:
• 50 OPM Monochrome at 300 dpi or less
• 30 OPM - Monochrome
• 15 OPM - Color
• File Format
• Monochrome - PDF, TIFF
• Color - PDF, JPEG
• TWAIN
• Monochrome - PDF, TIFF
• Color - JPEG, TIFF, PDF
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 7
Optional Fax System (M)
• Fax/Network Fax/Internet Fax
• Super G3 Fax
• Quick Scan Speed: Less than 2 sec. per page
• Transmission Speed:Less than 3 sec. per page
• Modem Speed: 33.6 kbps w / Auto Fallback
• Data Compression: MMR, MR, MH, JBIG
• Fax Memory: Shared System Memory
• Remote Switching
• 50 Program Dial settings
• 50 Group Dial Numbers
• Auto Reduction Reception
• Duplex Reception
• Network Fax Driver
• NW Fax Reception: SMB, FTP, e-Mail
• NW Fax Distribution: PDF, TIFF
• Internet Fax:Send and Receive Fax via the Internet
Resolution Gradation Resolution
Normal 2 8 dot/mm x 3.85 line/mm
Fine 2 8 dot/mm x 7.7 line/mm
Super Fine 2 8 dot/mm x 15.4 line/mm
Ultra-fine 2 16 dot/mm x 15.4 line/mm
Half-tone 128 8 dot/mm x 7.7 line/mm
Standard Network Scan
• Scanning Features
• Scan to e-Mail
• Standard LDAP
• Scan to Folder (via SMB)
• Scan to FTP
• TWAIN
• Protocol: TCP/IP
• Driver: TWAIN (PC)
• Consolidated Address Book
• Web Interface: Kyocera Command Center
P R O D U C T O V E R V I E W
Optional Data Security Kit (C)
• Provides Security Overwrite and Encryption
• Automatic and Manual Deletion processes
• Copy, Print and Send Data
Optional UG-30 PDF Enhancement Kit
• PDF Compression
• PDF Encryption
• Supports up to 128bit Encryption
Optional Workflow Solutions
• iTag
Document Management Solution
• KYOcapture Express
Simplified Document Workflow Solution
• KYOcapture
Document Capture Workflow Solution
Maintenance and Yields
• Monocomponent Technology
• 20K Toner Yield
• Amorphous Silicon Drum
• 300K Yield
• Preventive Maintenance Schedule
• 300K
• Maximum Monthly Volume
• KM-2560 - 80K
• KM-3060 - 100K
Additional Information
• 22.4” W x 24.4” D x 30.2” H
• 166 lbs.
• 120V, 60Hz, 11.5A
Y i e l d s
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 8
Item Description Yield
TK-677 Toner 1,160g 20,000 @ 6%
MK-670 Maintenance Kit 300,000
Item Description CS-2560/3060 CS-3050/4050/5050
Fax System (M) Network Fax System √ √
DP-670 Document Processor √
DF-670 Internal Finisher √
DF-730 1,000 Sheet Finisher √ √
JS-670 Job Separator √
BU-10 Fax Data Backup Kit √ √
PF-670 Paper Deck √
Data Security Kit (C) HDD Overwrite √ √
UG-30 PDF Compression /
Encryption Kit√ √
A c c e s s o r y C o m p a t a b i l i t y
P R O D U C T C O N F I G U R A T I O N
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 9
Option Description Item Code
DP-670 Document Processor 1203K56KL0
PF-670 500x2 Paper Feeder 1203K62US0
DF-730 1,000 Sheet Finisher 1205H10U10
DF-670 Internal Finisher 1203LB0UN0
JS-670 Job Separator 1203LC0UN0
Fax System (M) Fax Unit 1503KH2US0
BU-10 Fax Data Backup Memory 1703KJ0UN0
HDD Overwrite Data Security Kit (C) 1503KP0UN0
PDF Compression /
Encryption Kit
UG-30 1503KR0UN0
P R O D U C T C O N F I G U R A T I O N
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 10
Base Unit with Optional DP-670Document Processor and PF-670Dual Paper Drawers
Base Unit with Optional DP-670Document Processor, PF-670 DualPaper Drawers and DF-730 SimpleFinisher
T E C H N O L O G Y
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 11
Standard Print and ScanOne of the most important advancements in the
Office Equipment industry has been the
combination of multiple office machines into a
single multi-functional device. At one time, an
office may have required a fax machine, copier,
scanner, and a printer. Each of these machines
took up space in the office and each required
individual service agreements. With the
development of the MFP, all of these functions
are consolidated into a single product, reducing
the amount of equipment that is necessary to
perform these individual tasks. The MFP also
has additional features and functions that are
not available with most of the single function
devices. With the benefits that the digital MFP
provides, customers are able to realize
improved productivity at a much lower cost.
The CS-3060 and CS-2560 offers standard
Network Printing, Color Scanning and Optional
Fax/Network Fax/Internet Fax, in addition to
traditional copy functionality. In today’s
connected world, customers are looking for a
manufacturer who can provide them with a
standard feature set that meet the needs of their
office. With the key features, options and
reliability Copystar provides with these products,
the CS-3060 and CS-2560 will most certainly
improve the productivity of any environment and
are products that the small to mid-size business
can depend on.
Single Board ArchitectureThe new CS-3060 and CS-2560 continues to
build on the single board controller that was
introduced with the Falcon III MFPs. This single
board architecture provides a single connection
for both printing and network scanning. With
previous designs, two separate IP (Internet
Protocol) addresses were required for print and
scan. This can be an obstacle where IT
departments closely manage IP addresses,
control the placements of hubs, and in the small
business where multiple network drops may not
be available for installation.
Color ScanningIn addition to Standard Network Color Send
functionality, the new CS-3060 and CS-2560
also has the ability to scan in color and
monochrome. With the ability to scan in color,
the CS-3060 and the CS-2560 have a distinct
competitive advantage over some the other
competitors’ product in today’s market. The
CS-3060 and the CS-2560 with its color scan
capability from a monochrome MFP will allow
small to mid-size businesses to integrate the
scanning process of their color or black and
white documents into a more cost effective
solution.
With the CS-3060 and the CS-2560 color scan
capabilities, these products can be integrated
with the KYOcapture Suite of Document
Solution for businesses interested in converting
the paper-based document workflow of their
workgroup into a digital document workflow.
Scanning documents in color is an advantage
for businesses wanting to preserve the integrity
of the color documents.
Expanded / Shared Memory ResourcesThe new CS-3060 and CS-2560 utilize shared
memory resources for Print, Send and Copy.
The CS-3060 and CS-2560 are configured with
512MB Standard RAM (Random Access
Memory), and are upgradable to 1GB. These
new MFPs also come standard with a large
80GB HDD for Document Printing and
Copystar’s Document Box.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 12
Document BoxIn order to improve the productivity and
performance of the small to mid-size business
workgroup environment, it is important to
consolidate the management of a variety of
documents, including scanned images of hard
copy originals, and electronic documents. The
ability to share these documents amongst
multiple users and storing
these documents in a
secure central location is
vital to the productivity of
any workgroup.
With Document Box, users can save scanned
or printed documents to a specified Box in the
MFP 80GB HDD. User can access the
documents stored in the CS-3060 or the
CS-2560 Document Box from the control panel
or from the desktop. The Color TSI of the
CS-3060 and the CS-2560 offers an image of
the first page for proof checking to ensure that
the right document is being accessed.
Color Touch Screen Interface (TSI)Copystar designed the CS-3060 and the
CS-2560 so that the user can navigate through
the different menus on the MFP Color Touch
Screen Interface (TSI) quickly and easily.
The Color TSI for the CS-3060 and the
CS-2560 is very intuitive, has an easy to view
color display and improved icons that assist the
user with their document output requirements.
The Color TSI incorporates a tabbed
architecture, similar to file folders, so users can
easily find the features they require for creating
professional looking documents every time.
The Color TSI is positioned on a control panel
that can be adjusted and is Section 508
Compliant.
Network AuthenticationFor any Workgroup or Enterprise, protecting
network integrity is a key concern. Many of the
markets you will prospect will require Network
Authentication on any MFP that is connected to
the network.
The CS-3060 and CS-2560 provide standard
Network Authentication, using NTLM
(Windows® NT) or KERBEROS (Server
2000/2003). With Network Authentication active,
users will be required to login to the MFP using
their unique network ID and password.
Packed full of Exciting FeaturesThese new Small Workgroup Multifunctionals
offer technology and improvements, that in the
past was only found in higher volume
equipment. Each of these areas are detailed in
this Product Guide. From Paper Handling and
Finishing, to connectivity and document
sending, the new CS-3060 and CS-2560 push
the boundaries to new heights! Each section of
this product guide will outline and highlight
what’s new and important, and provide you with
in-depth insight as to why these unique new
products can be a true asset to your customer’s
business.
T E C H N O L O G Y
F E A T U R E S
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 13
New and Enhanced FeaturesWhen designs for the CS-3060 and CS-2560
were first considered, Copystar looked at how to
better meet the needs of the segment 2
customer. With improved features the CS-3060
and the CS-2560 are technologically advanced
MFPs. Learning and marketing these new
features and functionality to your prospective
clients in the small to mid-size business arena
will be a key factor in your selling strategy.
PerformanceCopystar is offering two outstanding new
products that deliver high performance and
productivity to meet the challenges and
demands of any small to mid-size business
workgroup environment. With the introduction of
the new CS-3060 and the new CS-2560, which
come standard with Network Print, Network
Color Scan and Optional Fax/Network
Fax/Internet Fax capabilities, companies can
improve the workflow processes, allowing their
users to perform these tasks more efficiently.
New Performance Features
• Document Box
• Improved Scanning Features
• Scan to FTP
• Scan to Folder via SMB
• LDAP Standard
• Multi Access Functions
• Multi Send Functions
• Advanced Job Programs
Document BoxDocument Box is an integrated storage/sharing
solution utilizing the standard 80GB Hard Disk
Drive (HDD). With Document Box, users will be
able to print critical documents quickly, directly
from the Color TSI.
Multi Tasking FunctionsWorkgroup users typically engage in a variety
of document processes. These include the use
of copying, printing, scanning and faxing. By
introducing the CS-3060 or CS-2560 into
these business environments, users will be
enabled to process multiple jobs
simultaneously with the Multi Task Multi
Access features, thus improving the efficiency
of their business processes.
Multi Send FunctionsWith Multi Send, the new CS-3060 and
CS-2560 can send documents to different
destinations from a single scan, greatly
improving overall productivity in any office.
Multi Send provides users with the ability to
simultaneously send documents to:
• FTP Sites
• Network Folders
• e-Mail folders
• Fax Destinations
Another key benefit of the CS-3060 and the
CS-2560 is the ability to Send and Print / Send
and Store simultaneously. User will no longer
need to wait for one task to be completed
before proceeding to the next task. With the
ability to multi task, the CS-3060 and the
CS-2560 will prove to be very productive in
any workgroup environment so plan to
demonstrate this feature to prospective
customers
50 Job ProgramsMost devices in the market have limited
functionality when using Job Programming.
The CS-3060 and CS-2560 capitalize in a
Single Board Architecture and provide up to 50
Job Programs for both Copy and Send
functions. Access is fast and easy, from the
Program key on the left side of the Control
Panel.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 14
Ease of UseFor many companies, printing and scanning will
be functions that their businesses focus on. In a
small to mid-size business however, copying will
be the major reasons for purchasing an MFP.
Another deciding factor that most businesses
consider when purchasing an MFP, is ease of
use. If users cannot get the output they desire
quickly and easily, frustration mounts, resulting
in decrease job performance, which makes the
user counter productive when using the MFP.
New Ease of Use Features• Color Wide Touch Screen Interface
• Preview Image
• Advanced Help Key / Help Guidance
• Operation Status LED
• Job Finish Notice (Copy / Send)
• USB Host Interface
• Improved Paper Cassettes
Color Wide Touch Screen InterfaceThe first new feature you will come upon is the
New Color Touch Screen Interface. This is a key
improvement over previous segment 2 MFPs
that provided a menu driven interface. Your
clients will find that the Color TSI are easier to
navigate and simpler to use over traditional
control panels. The CS-3060 and
CS-2560, the Color TSI features a Thumbnail
Viewer and improved Icons for most features.
Advanced Help Key / Help GuidanceIn addition to the obvious improvements, the
CS-3060 and CS-2560 Operation Panel
includes a Help Key / Help Guidance function
for on-board assistance with product features,
as well as the occasional misfeed or service
issue. This a clear benefit to users who would
like to use all of the time saving features that
the
CS-3060 and CS-2560 have to offer, but are
not
sure how to use them
Operation Status LEDA device that stops working due to a misfeed
or other issues can affect all users who rely on
a centralized MFP for the Print, Send and
Copy needs. With this in mind, the new
CS-3060 and CS-2560 were designed with
Operation Status LEDs that provide the user
with the ability to see the status of the device
from a distance.
USB Host InterfaceThe innovative USB Host Interface is a feature
that will be a benefit to Performance, Ease of
Use or Security. Located directly on the right
side the USB Host Interface allows users to
print PDF data stored on a common USB
“flash drive” quickly, efficiently and securely.
When printing PDF documents the user
simply plugs in their USB flash drive into the
USB Host Interface. The Removable Memory
Box feature will then display all the PDF files
located on the root of the USB flash drive. The
user can then select the PDF document and
the desired document/page attributes such as
duplex and finishing when printing the PDF
document from the USB flash drive. Since the
PDF file prints directly from the USB flash
drive to the MFP, there is no residual data that
remains on the MFP, assuring that any PDF
document that is printed
remains secure and
confidential.
USB HostInterface
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 15
Improved Paper CassettesThe CS-3060 and the CS-2560 are the first MFPs
in Copystar’s product line to in corporate the new
Top/Bottom handle design The new handles are
designed so users can unlock the cassettes using
either an over or under hand grip and are Section
508 compliant.
SecurityThe CS-3060 and the CS-2560 comes standard
with Network Authentication that supports
Windows® NT and Server 2000/2003
environments, assuring IT administrators that this
device will comply with their company’s network
login security implementations. Administrators also
have the option to set and manage Local
Authentication at the device level when Network
Authentication is not required.
Additional Security Features:• HDD Overwrite/Encryption
• PDF Encryption and Compression
• IP Filtering
• Security Watermark (via KX Print Driver)
HDD Overwrite / EncryptionCompanies focusing on compliance and security
strategies will see the optional Copystar
Data Security Kit (C) especially valuable.
Data Security Kit (C) uses a three level overwriting
method to erase any information that is stored in
the hard disk drive during Copy, Print, and Send
functions. With the Encryption included in the
process, all confidential documents saved in the
80GB HDD will be securely stored, allowing
workgroups and departments to adhere to
the strict guidelines in place today such as
Sarbanes-Oxley (SOX), HIPPA or other
federal government mandates.
Data Security Kit (C) will undergo evaluation
for ISO 15408 Certification after launch.
IP FilteringFor IT management and administration, the
new CS-3060 and CS-2560 supports IP
Filtering, allowing administrators to
designate, by IP segment, individual
assignments to prevent unauthorized usage
and ensure network security.
IP Filters can be assigned for the following:
• SMTP • FTP
• IPP • LDAP
• HTTP • RAW Port
Security Watermark (KX Driver)One of the features available for the
KX Driver is the Security Watermark feature
that can be used in conjunction with the new
CS-3060 and CS-2560 MFPs.
The KX Driver Security Watermark places a
faint watermarked image in the background
of the original printed document, similar to
any other watermark. When this original
document is copied, this watermark and the
background are printed.
PDF Enhancement Kit A full description of the optional PDF
Enhancement Kit can be found in the
“Options” Section of this Product Guide.
Release handle on
inside to open cassette
C O N N E C T I V I T Y
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 16
Standard NetworkingThe CS-3060 and the CS-2560 come with
standard Network Print and Color Send
capabilities, which are part of the single board
architecture. With the ability to Network Print and
Color Send, the CS-3060 and the CS-2560 will
have a major impact on the workflow process of
any small to mid-size business workgroup
environment.
Network Specifications:
Operating System (OS) Compatibility• Windows®
95/98/Me/NT4.x/2000/XP/2003/Vista
• Novell®
3.x/4.x/5.x/6.x
• Macintosh
OS 8.x/9.x/10.x
• UNIX
Sun OS 4.1.x
Solaris 2.x
AIX
HP-UX (LPR)
Protocol Support• TCP/IP
• IPX/SPX
• AppleTalk
• NetBEUI
TCP/IP Support• Network Level
ARP, RARP, IP, ICMP
• Session Level
TCP/UDP
• Application Level
LPD, FTP, BOOTP, DHCP,
SNMP, HTTP, SMTP, DNS, IPP, POP3
Novell NetWare® Support• IPX, SPX, SNMP
• Encryption passwords in Print Mode
• NetWare® 3.x, 4.x, 5.x, 6.x
AppleTalk Support• ELAP, AARP, DDP, AEP, NBP, RTMP, ZIP,
ATP, PAP
• AppleTalk Phase 2
Network Authentication Support• NTLM (Windows NT)
• KERBEROS (Windows 2000/2003)
NetBEUI Support• NetBIOS supports SMB
Enterprise Environments Supported• Citrix® MetaFrame
• Windows® Terminal Services
• SAP
• AS/400
• Linux
• UNIX
Web Interface• Kyocera Command Center
Kyocera Network Tools and Utilities• KMnet Admin
• KM-NET Viewer
• KM-NET for Clients
• KM-NET for Accounting
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 17
ConnectivityThe CS-3060 and the CS-2560 standard
features and functionality, when combined with
Kyocera’s advanced user-friendly software
solutions, allow users to easily network print,
network scan or network fax from the desktop or
the MFP.
For the IT administrator, the advanced software
monitoring tools will allow administrators to
control all of the business processes across their
network from a central location, easily and
effectively.
Network SetupThe new MFPs connect quickly and easliy to
most network environments. The Single Board
Controller offers a standard 10/100BaseTX
interface that can be controlled directly from the
desktop with the web-based KyoceraCommand Center (KCC). This useful tool can
be accessed from most Web Browsers,
including Internet Explorer, Netscape Navigator,
Mac’s Safari or any other browser currently
supported.
The IP Address can be assigned to the device
(static or dynamic) from the Control Panel or
Kyocera’s Quick Setup Tool. Once the
appropriate IP scheme has been designated,
Kyocera Command Center can be accessed,
and advanced networking commands and
settings can be entered. This web page can be
given a password and secured, so only
authorized Network Administrators can change
settings when the need arises.
What’s most important to the small to mid-size
business and IT contacts is that full network
control of the CS-3060 and CS-2560 is
available at the desktop, so Administrators can
focus on the day-to-day tasks of their job, and
not have to devote their time to managing the
MFP.
From Kyocera Command Center,
administrators can also set the IP Filters, turn
on/off the IPP (Internet Printing Protocol), and
set e-Mail (SMTP and POP3) and
management settings at the desktop.
Business environments that determine that
Network Authentication is required at the
device can set the proper Authentication
settings in Kyocera Command Center.
With Kyocera Command Center, the ability to
select and designate any network setting
provides administrators with a powerful tool
that can simplify their day-to-day tasks.
From the web-based KyoceraCommand Center, Authentication can
be set for NTLM or KERBEROS.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 18
KM-NET SuiteThe KM-NET suite of software, tools and utilities,
will further enhance the management process of
the CS-3060 and CS-2560 by providing
administrator with the necessary tools for
accounting, trouble shooting and monitoring, the
MFP from a central location
These comprehensive tools offer a tremendous
“value-add” to any company. Whether your
audience is the Administrator, Key Operator or
end-user, KM-NET Suite delivers a strong
message.
KMnet AdminKMnet Admin is Copystar's unified device
management solution that uses a web-based
platform to give network administrators easy and
uncomplicated control of all network enabled
printing devices. By using state-of-the-art
technology, features can be added to
KMnet Admin by installing software add-ins that
give the administrator and users only the
features that they require without adding
additional complicated applications.
KMnet Admin is web-based, so no client
software installation is necessary. KMnet AdminIncludes:
• Device Management and Reporting
• Plug-ins for
• Print Job Management
• Accounting
KM-NET ViewerKM-NET Viewer is a stand alone utility, and
gives Administrators the ability to filter devices
by Model Number, Speed, Group, Status and
Protocol.The ability to arrange by filter and
create groups based on department or floor
plan is particularly advantageous, so
diagnostics and any subsequent actions are
easier to perform.
KM-NET for ClientsIn larger companies and environments, device
administration and management may be
handled at multiple levels. Each department or
workgroup may be responsible for the daily
tasks associated with their output devices. In
this case, an all-encompassing tool such as
KM-NET Viewer may be more than
management is willing to distribute. Key
Operators and Managers have an obligation
to their own point of need. For this important
assignment, Kyocera developed a utility called
KM-NET for Clients. Unlike KMNV, which can
view all output devices on the network,
KM-NET for Clients can view up to five (5)
Copystar devices at a single time. Once
installed, the utility can perform a search on
the local network segment or port. Once auto-
discovery is accomplished, up to five devices
can populate the utility for administration. A
Virtual Front Panel will be accessible,
showing machine status, estimated paper
levels and default Page Description Language
(PDL) of the interface.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 19
KM-NET for AccountingFor the customer who has a need for tracking
usage of Copystar’s new Workgroup MFPs,
KM-NET for Accounting (KMNA) is software
for departmental access and accountability. This
tool will be an integral part of any company that
wishes to track usage for departmental or client
charge-backs.
Key features of KMNA include:
• User authorization to access utility to
secure account information
• Remote Activation/Deactivation of device
• Job Account Management feature
• Remote Account Management for
Print, Scan, Copy and Fax volumes
• Auto Device Discovery and Registration
• Select Spreadsheet or Graphical View of
Account Codes
• Import/Export for Accounting Code
and Printing System database backup
Enterprise System ManagementSince the CS-3060 and CS-2560
Multifunctionals may be targeted within large
companies workgroups, many of these
customers may have already invested in
Enterprise System Management (ESM)solutions from another party. These customers
will be looking for a device that can fit within
their infrastructure. Some of the ESM solutions
that Copystar Products can integrate with
include:
• HP Web JetAdmin®
• HP OpenView®
• IBM Tivoli®
• Novell® NDPS Monitor
P R I N T
K M - 3 0 6 0 / K M - 2 5 6 0 P R O D U C T G U I D E 20
The CS-3060 and the CS-2560 are products
that are designed for the workgroups that not
only require a product that can copy but can
handle all of their printing needs as well. With a
powerful embedded print system that comes
equipped with a 400 MHz processor and 512MB
RAM (upgradeable to 1GB) and a standard
80GB HDD, the CS-3060 or the CS-2560 can
accommodate most of the printing demands of
any small to mid-size company’s workgroup
environment.
Standard Print Specifications:
Processor• PowerPC750/400MHz Processor
Memory• Std/Max 512MB/1GB (Shared)
• Std 80GB HDD (Shared)
Print Resolution• Fast 1200 Print Mode
• 600 x 600 dpi
• 300 x 300 dpi
PDL/Emulations• PRESCRIBE
• PCL 6 (XL, 5e)
• KPDL3 (PS3)
• KCGL (HP/GL2)
• Diablo 630
• IBM ProPrinter X24
• Epson LQ850
• Line Printer
Font Support• 80 Outline Fonts for PCL XL
• 80 Outline Fonts for KPDL3
• 1 Bitmap Font
Driver Support• KX Driver for Windows®
• PPD for MAC
• PPD for Linux/UNIX
• Certified Uni Driver
• Windows® 64-bit Drivers
Operating System Support• Windows® 95/98/Me/NT4/2000/XP/2003/Vista
• Novell 3.x/4.x/5.x/6.x
• Mac OS 8.x/9.x/10.x
• UNIX
• Linux
Protocol • TCP/IP
• IPX/SPX
• AppleTalk
• NetBEUI
Standard Interfaces• 10/100BaseTX
• High Speed USB 2.0
• USB Host (2)
Expansion Slots• Optional Fax
Web Interface• Kyocera Command Center
Print Utilities• PDF Direct Print
• PRESCRIBE Utilities
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 21
ControllerThe CS-3060 and CS-2560 utilize Copystar’s
Single Board Architecture and a single Network
Interface (NIC). This single board controller
features an embedded PowerPC® RISC
processing chip, delivering high performance for
any customer’s printing environment.
The CPU of the controller has a ‘clock speed” of
400MHz (MegaHertz), which is very competitive
for MFPs in this range. Most competitive MFPs
top out at 500MHz, with a few in the 300MHz
range. Faster clock speeds provides faster
processing times of documents, improving the
overall efficiency of the device, and inevitably,
the company’s workload.
Document OutputWith output speeds of up to 30 pages per
minute, 600 x 600 dpi and 256 levels of
grayscale, the CS-3060 and the CS-2560 can
support the following environments: Windows®,
Mac, Novell®, UNIX and Linux. Copystar also
provides excellent print solutions like PDF Direct
Print that will allow businesses to structure a
more cost effective and productive printing
workflow process within their workgroup
environments.
Page Description Languages (PDLs)Page Description Languages or PDLs are the
embedded command sets that a printer
understands for document output. The most
common PDLs in an office environment will be
PCL (Printer Control Language) or PostScript.The new Copystar Workgroup MFPs support
both of these PDLs, as well as other PDLs that
will often be found in environments, such as
back-office or mainframe printing.
Copystar’s ability to emulate a variety of PDLs
provides our products with a significant
advantage in any environment that requires
integration with operating systems beyond a
typical Windows® model. Companies with
Macs, Linux systems or running UNIX will find
that Copystar is a critical choice to solve their
printing issues.
PCL XL is an extended PCL language based
on PCL 6 and 5e, that supports advanced
printer features, and is device dependent.
Documents printed using PCL language are
usually general office documents created in
popular office programs. Printing documents
with PCL sends the data from the application
with the print commands for page layout and
output is dependent on the device.
PostScript is a PDL most commonly used with
desktop publishing software, though it can be
used for office applications as well. PostScript
is device independent and utilizes a PPD
(PostScript Printer Definition) to output pages.
The PPD sets the page layout without any
device requirements, so documents can be
printed from one device to the next without any
issues. Copystar provides a PostScript
emulation called KPDL3 with our devices as
standard.
The CS-3060 and CS-2560 support the
following PDLs:
• PCL XL (PCL 6 and PCL 5e)
• KPDL3 (PostScript 3)
• KC-GL (HP/GL2))
• Diablo 630
• IBM ProPrinter X24
• Epson LQ850
• Line Printer
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 22
Font Support Business documents printed on monochrome
devices, whether they are MFPs or Printers, will
typically be text-intensive, rather than graphics-
intensive. Because this is the case, the
appearance of the text, or fonts, is imperative for
any output device. The new CS-3060 and
CS-2560 Workgroup MFPs will provide
companies with the following:
• 80 Outlines for PCL XL/5e
• 80 Outlines for KPDL3
• 1 Bitmap Font Outline
Font Support for popular TrueType Outlines will
guarantee that documents look exactly how the
person printing has intended. The KX Driver will
allow users to select a variety of choices.
Driver SupportKyocera provides the following Print Drivers:
• KX Driver
• Windows® 64-bit Drivers
• Windows® Vista Drivers
• Certified Uni Drivers
• PPDs for Mac
• PPDs for Linux/UNIX
Copystar’s KX Driver common user interface,
which is shared across all Copystar’s
multifunctional devices, will simplify both setup
and use and will allow user to take full advantage
of the CS-3060 or the CS-2560 features and
options.
With the KX Driver, users in small to mid-size
business workgroups will be able to specify paper
handling as well as duplex and stapling and have
these print jobs delivered to the Document Box for
secure output. Administrators will also appreciate
the benefits of the KX Driver single user interface.
Administrators will be able to install the KX Driver
for the CS-3060 or the CS-2560 across multiple
operating platforms, regardless of which
Windows® operating system is being used or
which page description language is required.
The KX Driver for Windows® is unique in the
industry, providing a strong competitive
advantage in your marketing efforts. The
KX Driver has the same look and feel for all
PC users, no matter what version of
Windows® is installed, what Copystar device
is used, or what PDL (PCL or KPDL) is
selected. Since the driver looks the same from
one Copystar device to the next, incidences of
help desk and printing assistance can be
drastically reduced, eliminating the burden on
IT. For the people actually printing in an every
day situation, using the KX Driver will be a
benefit because it is easily navigated and
simple to use. When the time comes to
upgrade the OS on their PC, they have
already mastered the driver, so human error
and associated print waste can be kept at a
minimum.
Copystar’s KX Driver for Windows® supports all Copystar Products(Printers and MFPs), PDLs (PCL XL/5x; KPDL3) and Windows® OS in asingle unified GUI. This is a major advantage when discussing CopystarProducts with Network Administrators, Department Heads and end-userswithin an organization.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 23
The advantage of the Copystar KX Driver is that all of the
features are available from the desktop, providing a strong
choice for the busy Workgroup and Department environment.
Figure 1 displays the Publishing Tab within the KX Driver.
From this tab, Front and Back Covers, as well as Inserts can
be selected for professional output. When selecting Covers
and Inserts, different paper trays can be assigned, including
the MPT.
Figure 2
Figure 2 displays the Finishing Tab and available options when
sets need to be completed. From the Finishing Tab, staples can
be added to the Top or Bottom Left,Side
Figure 3 shows the
Imaging Tab of the KX
Driver side by side with
the Grayscale Adjustment
Settings window for
contrast and brightness.
When changed, the
grayscale image of the
Earth changes according
to the amount selected on
the slidebar.
Figure 4
Figure 4 is the Properties Screen found when the
KX Driver is accessed from the Windows Control Panel.
Options such as Finishing and Paper Handling can be
configured manually, or by utilizing the Auto Configure
button (in Network environments). Companies that are
interested in cost accounting and security will find the
ability to set these features from the Administrator button
extremely helpful.
Figure 3
Figure 1
K M - 3 0 6 0 / K M - 2 5 6 0 P R O D U C T G U I D E 24
Windows® 64-bit DriversMicrosoft’s launch of 64-bit versions of
Windows® XP and Server 2003 has provided a
platform for greater scalability and improved
performance. Positioned as an alternative to
UNIX, 64-bit computing is becoming a force in
Corporate America. Copystar has responded to
this change in the market by releasing our own
Windows® 64-bit Drivers for our products,
including the new CS-3060 and CS-2560 MFPs.
These new 64-bit Drivers are available for PCL
or PostScript, enabling IT to deploy drivers
designed for their OS of choice to the users on
the network.
Windows® VistaWith the release of Windows Vista, many
companies are taking advantage of all of the
latest technology that Microsoft® has to offer. To
meet the demand for printer drivers that will be
compatible with Vista, Copystar has created the
KX Driver for Vista that will enabling businesses
to print to the MFP from any computer using the
Windows® Vista operating system.
Certified Uni DriversThe Certified Uni Drivers for PCL or PostScript
are also designed for Windows® environments,
such as Terminal Services, or other Server-
Based Computing (SBC) platforms like CITRIX
MetaFrame or Tarantella.
PPDs for MacintoshWhile Apple Macintosh® computers will be a
small percentage of computing devices found
in most companies the ability to provide a
precise printing solution, for the latest Mac OS’
is a benefit. Users in a corporate environment
who utilize Macs may be strong influence for
Imaging product choices inside a company. Mac
users will be especially eager to hear that the
CS-3060 and CS-2560 offer the latest PPDs for
Mac OS’ up to and including OS 10.4 (Tiger).
Combined with a strong message about these
new Workgroup MFPs scanning capabilities in
a Mac environment should be a strong
argument for placing any of these new MFPs
inside that company.
PPDs for Mac provide users with control over
advanced printing functions and features such
as duplex and finishing. In addition, job
storage using the new Document Box function
is also available.
PPDs for Linux/UNIXOne of the benefits that providing a PostScript
emulation (KPDL3) as a standard feature of
our print controller on these new models is the
ability to integrate in both Linux and UNIX
environments. Both the Linux open source and
UNIX architectures utilize a PostScript Printer
Definition to enable printing.
For most environments, the CUPS (Common
UNIX Print System) PPD is recommended:
“CUPS provides a portable printing layer forUNIX®-based operating systems. It isdeveloped and maintained by Easy SoftwareProducts to promote a standard printingsolution and is the standard printing system inMac OS® X and most Linux® distributions.”(Source: CUPS.org)
Copystar’s PPD for the CS-3060 and CS-2560
supports the CUPS print layer, and integrates
seamlessly into these alternative types of
environments.
C S - 2 5 6 0 / C S - 3 0 6 0 P R O D U C T G U I D E 25
Operating System SupportMultifunctionals like the CS-3060 and CS-2560
are designed for network connectivity and
printing in a large infrastructure. Because
companies don’t all rely on a single Network or
Client OS, it is important to stress the cross-
platform compatibility of these new MFPs.
The CS-3060 and CS-2560 can be installed in
any of the following networks:
• Windows® 9x/Me/NT4/2000/XP/2003/Vista
• Novell NetWare® 3.x/4.x/5.x/6.x
• Mac OS 8.x/9.x/10.x
• UNIX
Protocol SupportThe standard controller on the new CS-3060
and CS-2560 MFPs support the following
network protocols for printing:
• TCP/IP
• IPX/SPX
• AppleTalk
• NetBEUI
Standard InterfacesThe CS-3060 and CS-2560 all provide a number
of standard and optional interfaces so
integration in virtually any printing environment
is possible.
Standard Interfaces include:
• 10/100BaseTX
• High Speed USB 2.0
• USB Host (2)
The standard 10/100BaseTX interface of these
new models is a single NIC, so Printing and
Sending will share an IP address. This
eliminates the burden of maintaining or leasing
a higher number of addresses that dual NICs
require.
Print UtilitiesCopystar’s unique Print Utilities expands the
possibilities of any Workgroup, boosting
performance and productivity. Print Utilities
include:
• PDF Direct Print
• PRESCRIBE Utilities
PDF Direct Print allows users the flexibility to
print PDF documents without the need to open
the file in Acrobat Reader and follow the typical
“CTRL + P” or “File:Print” commands that they
are used to. PDF Direct Print allows files to be
added directly into the PDF Direct Print queue
for output. Control over duplex, finishing, job
storage and accounting is still available with
PDF Direct Print.
PRESCRIBE UtilitiesThe ability to create, store and call forms from
a compact flash card or from the device HDD
allows your customers to improve their overall
Return on Investment (ROI) and save on the
business resources, such as network
bandwidth, storage space and other cost, such
as inventory management associated with
preprinted forms. With PRESCRIBE, the
preprinted forms your customer currently use
in their business can be created digitally and
store in either the CS-3060 or the CS-2560
MFP’s HDD or on a compact flash card that
can then be inserted into the available
compact flash card slot of the CS-3060 or
CS-2560, eliminating the need to inventory
expensive preprinted forms and the cost
associated with these forms.
S C A N / S E N D
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 26
The ability to share resources efficiently and
securely enables businesses to be more
productive and profitable. The CS-3060 and the
CS-2560 with its Multi Send feature, allow users
to scan documents to e-Mail addresses, FTP
destinations, network folders and facsimile
devices all from a single scan. The ability to scan
to multiple destinations simultaneously, will
increase productivity and provide a secure
method for sharing resources among multiple
users in any small to mid-size business
environment.
Standard Scan Specifications:
Scanner Type• Color and Monochrome Scanner
Interface• 10/100BaseTX
Supported Protocol• TCP/IP
Resolution (include Fax Resolutions)• 200 x 100 dpi
• 200 x 200 dpi
• 200 x 400 dpi
• 300 x 300 dpi
• 400 x 400 dpi
• 600 x 600 dpi
Scan Speed• 50 OPM - Monochrome (300 dpi)
• 30 OPM - Monochrome (400/600 dpi)
• 15 OPM - Color
File Format• Monochrome
• PDF, TIFF
• Color
• PDF, JPEG
Scanning Features/Functions• Scan to e-Mail
• Standard LDAP
• Scan to Folder via SMB
• No utility required
• Scan to FTP
• TWAIN (PC)
Driver• TWAIN (PC)
Web Interface• Kyocera Command Center
Color and Monochrome ScanningCustomers looking for a strong scanning
solution for their small to mid-size workgroup
environment will be very interested in the
ability to scan documents in color. The new
CS-3060 and CS-2560 will accommodate this
growing trend, incorporating a scanner that
can read color and monochrome images,
enhancing the products capabilities, and
allowing users to integrate their color scanning
requirements with a monochrome output
device.
Scan speed (simplex) from the optional
DP-670 Reversing Automatic Document
Processor will be a very productive 50
originals per minute (OPM) at 300 dpi in
Monochrome mode, 30 OPM at 400/600 dpi
in monochrome mode and 15 OPM in Color
mode. The DP-670 can hold up to 75 Letter-
size originals, maximizing productivity for
scanning applications.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 27
Multi Send FunctionThe ability to send a document to multiple
locations simultaneously from a single device is
one of the key features of the CS-3060 and the
CS-2560. The ability to send a document to
multiple locations from a single scan will
increase the productivity of any small to mid-size
business and will also reduce the amount of
propriety equipment that the workgroup maybe
utilizing for these individual tasks such as flatbed
scanners and/or Fax devices.
With the Multi Send Feature, users can select
multiple locations from the Consolidated
Address Book or add them on an ad-hoc basis
with the QWERTY-style keyboard from the Color
Wide Touch Screen. Once the appropriate
destinations have been selected, the document
can be scanned and sent in the most efficient
manner. Up to 500 destinations can be set in
Multi Send mode.
Scan to e-MailUser can scan documents to any e-Mail address
from the Consolidated Address Book, using the
built-in LDAP feature or ad-hoc by typing in the
e-Mail address using the QWERTY keyboard on
the Color TSI.
Scan to FolderWith SMB (Server Message Block), user can
scan documents to any shared folder on their
network, which can then be shared or viewed
by multiple users simultaneously.
With the ability to Scan to Folder via SMB, the
CS-3060 and the CS-2560 are no longer
confined to a Windows® or Mac environment.
SMB can be translated into Linux architecture
with Samba allowing users to send
documents to computer that are using Linux
Operating Systems.
Scan to FTPFor companies who have a FTP (file transfer
protocol) server in place for sharing and
downloading files, user can scan large files or
color images directly from the CS-3060 or the
CS-2560 to the FTP server
File Transfer Protocol, or FTP, is an efficient
and effective way to share large files, without
file size restrictions.and is designed to
transfer files at a high-rate of speed.
TWAINWorkgroup user can also scan to TWAIN
compliant applications. With the CS-3060 and
the CS-2560, users can scan directly to these
applications in black and white as TIFF or
PDF and in color as JPEG, TIFF and PDF.
FTP
Folder
Fax
Single Scan
Multi Send Capabilities
Fax Number Up to 500 Numbers
e-Mail Address Up to 100 Destinations
FTP, Folder Up to 10 Folders
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 28
Consolidated Address BookThe Consolidated Address Book located at the
device level is for Send Functionality, namely
Scan and Fax. The Consolidated Address Book
allows for businesses to store up to 2,000
destinations with e-Mail destinations or Fax
numbers. Combined with the standard LDAP for
Scan to e-Mail function, the CS-3060 and
CS-2560, provide a strong competitive
advantage for any workgroup.
Kyocera Command CenterLike Network and Print defaults, Kyocera
Command Center also provides control over
scanning defaults and port settings.
Additional Scanning FeaturesIn Scanning Mode, users have the ability to
change default settings and select individual
features that best suit their requirements at the
point of need.
In Send Mode, the Touch Screen Interface
uses a tabbed architecture like Copy Mode.
The Quick Setup tab can be customized with
the Sending features important to a
company’s business processes.
Scanning Features include:
• Zoom
• Density
• Resolution
• Sending Size
• Image Type
• Color Select
• File Separation
• Image Direction
• Background Density Adjustment
• Border Erase
• Sharpness
• Duplex/Book Scanning
• Mixed Size Scanning
• Continuous Scan
• Long Original (for Fax)
• Centering
• Multi-Page Form
• File Name Entry
• Job Finish Notice
• e-Mail Subject/Body
• Send and Print
• Send and Store
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 29
While many of the available Scanning features
are recognizable, there are new features that
every Sales Consultant should make their
customers aware of.
File Separation allows users to scan a stack of
documents directly from the Document
Processor and deliver the documents as
individual files. This is especially useful when
documents like invoices and bills of lading are
scanned.
Continuous Scan lets users scan more pages
than the Document Processor is capable of
holding, or add scanned pages from directly off
the glass for inclusion inside a scanned
document. This is incredibly valuable to the
Legal, Financial and Healthcare markets, who
may require information from statutes or laws
from bound books in the document they are
scanning.
File Name Entry allows users to name the
document at the time it is scanned. This avoids
confusion, especially when documents are
scanned to an FTP or Network folder. File
names can be up to 30 characters long.
Additional information, such as Date & Time and
Job Number can also be input.
Job Finish Notice provides a message via e-
Mail or network notification when a large job has
been completed in Send Mode.
e-Mail Subject/Body allows users to customize
a message during the Scan to e-Mail process.
This ability assists in the delivery of documents
that may otherwise be trapped in an e-Mail
Servers spam filter*.
With this feature, an e-Mail Subject line can be
set up to 60 characters, and Body text can be
added up to 500 characters. Copystar does not make any claims or guarantees that the e-Mail
Subject/Body feature will allow users to bypass corporate e-Mails
filters and protocols.
Send and Print allows user to send
documents to multiple location and output
hardcopies simultaneously. With the Send and
Print function, users will no longer have to wait
for the MFP to complete the printing task
before enabling sending task. This is an
indispensable feature especially if the
CS-3060 or the CS-2560 is being used as
network shared printer to accommodate the
printing needs of the workgroup.
Send and Store like Send and Print, Send
and Store allow users to perform multiple tasks
simultaneously. With Send and Store, users
can send documents to multiple destinations
and store the scanned data in the Document
Box at the same time. The Send and Store
feature is a value add for any workgroup that is
planning to share the send capabilities that
come standard with the MFP and would like to
store the scanned images they send in the
Document Box without having to wait for send
function to complete before using the store
function.
C O P Y
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 30
The small to mid-size business looks to the
dealer to provide them with a product that is
affordable, easy to use and reliable.
With a Large Color Touch Screen Interface, that
has improved icons and a tabbed architecture
the CS-3060 and the CS-2560 allows the
workgroup user to navigate from every screen
easily and efficiently. Copystar also designed the
CS-3060 and the CS-2560 around Copystar’s
Long Life components, making the CS-3060 and
CS-2560 dependable and the ideal choice for
the small to mid-size business.
Color Touch ScreenThe newly designed larger Color TSI for the
CS-3060 and CS-2560 is intuitive for the
customer, with an easy to view color display and
improved icons that assist the user with their
document output requirements.
The five tabs on the Color TSI include:
• Quick Setup
• Original/Paper/Finishing
• Image Quality
• Layout/Edit
• Advanced Setup
To simplify the office copying, the Quick Setup
tab can be customized with up to six (6) feature
buttons. These buttons can also be arranged in
any order, determined when the features are
registered.
Another improved feature is the ability to
create Shortcut Keys on the main screen for
often used features. With previous models,
only three Shortcuts could be registered. With
the new CS-3060 and CS-2560 models, up to
six Shortcuts can be registered in Copy Mode.
The Touch Screen keyboard can be set to the
following choices:
• QWERTY
• QWERTZ
• AZERTY
Depending on the company’s natural language
preference, the keyboard can be set so it best
fits their environment.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 31
The new larger full Color TSI has 800 x 480 dot
resolution,and an increased size of 8 1/2 inches.
In addition to the Color LCD, the Control Panel
also features LEDs for specific functions and
messages on the panel.
Control PanelIn addition to the Color TSI, the Control Panel
has been updated with new Function and
Application hard keys, display LEDs and keypad
area.
New Function/Application KeysThe left side of the Control Panel provides
access for:
• Copy Mode
• Send Mode
• Document Box
• Status
• Program
• Application
Although the Copy, Send and Document Box are
important hard key function these hard keys are
pretty self-explanatory, what will be explained in
greater detail are, the Status, Program and
Application hard keys.
Status shows the status of all activity, including
Printing. From the Status key, pending job
information, as well as job logs can be
accessed.
The Program key provides access to Copystar’s
unique 50 Job Programs that are stored. These
Job Programs can be set for both Copy and
Send modes, raising the bar on office
performance and ease of use.
The last key is for Application. Pressing this
button allows users to access the optional
KYOcapture Express, iTag and KYOcapture
Solutions when available. This key will also be
used for future functionality of these models.
System Menu / CounterThe System Menu key provides access to the
setup and configuration of the MFPs, including
default settings for Copy, Send and Document
Box, customizing the Color TSI, network
settings, language and other features that
each user may wish to change. The System
Menu can be “locked” by an Administrator
directly from the Kyocera Command Center
web interface, so once the appropriate settings
have been made, they can only be changed
by authorized personnel.
The Counter key displays the individual
counters (Copy/Print/Scan/Fax) that have
been printed and scanned This data can also
be printed directly from the TSI on the MFP
Status Page.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 32
System LEDsThe System LEDs are positioned directly above
the Color TSI, and display when print data is
being received, an incoming fax or scanned
image is being transmitted, a fax is being
received, when the memory buffer is executing,
or a system error has occurred.
Control Panel KeypadTo the right of the Color TSI is the 0-9 Keypad
area, which includes the Start and Stop buttons,
a button to clear data entered incorrectly, and a
manual reset allowing users to reset the
defaults.
In addition, a new animated Help key, with a ‘?’
icon provides graphic Help guidance for virtually
all the features of the MFPs, simplifying end
user’s interaction with the devices, and providing
a complete tutorial to allow users to utilize the
CS-3060 and CS-2560 to the fullest.
Accessibility Display ButtonThe Accessibility Display Button increases
the magnification of the Color TSI making it
easier for users with impaired vision to see the
different features they wish to utilize when
working with the MFP. The AccessibilityDisplay Button is another feature that makes
the CS-3060 and the CS-2560 user friendly
and is also 508 Compliant.
Additional Copy FeaturesMany of the small to mid-size businesses that
dealers target will undoubtedly be looking for
the robust functionality that the CS-3060 and
the CS-2560 can provide.
In Copy Mode, these models offer a
comprehensive feature set that will allow
workgroup users to take full advantage of the
Copy functionality on the new CS-3060 and
CS-2560.
These features include:
• Zoom
• Density Adjustment
• Finishing
• Duplex
• Original Image
• Collate
• Original Size Detection
• Paper Select
• Output Designation
• Original Orientation
• ECOprint
• Combine Images
• Margin/Centering
• Border Erase
• Covers
• Page Numbering
• Memo Pages
• Continuous Scan/Job Build
• Auto Image Rotation
• Negative Image
• Mirror Image
• Multi-Page Form
• Job Finish Notice
• File Name Entry
• Priority Override
• Repeat Copy*
Most of these are standard Copy features that
users are familiar with. Newer features like
Job Finish Notice provides a message via
e-Mail or network notification when a large
copy job has been completed. File NameEntry allows users to enter a name and job
number for a copy job, so it can be easily
tracked when cost accounting is required.
D O C U M E N T B O X
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 33
Small to mid-size businesses can utilize the
Document Box function when workgroups require
immediate access to information from a centralized
manage point. With the standard 80GB HDD
workgroups can store jobs temporarily for up to
seven days using one of the Document Box
functions. The retention time can be set to fit the
requirements of the workgroup as needed.
Although documents may remain in the MFP’s
HDD indefinitely, data can be lost if an issue arises,
so workgroups should only use the Document Box
as a temporary storage device.
One of the strong product features of the
Document Box is the various functions built within
the system. Document Box includes four distinct
types of boxes, each with a different purpose and
potential use.
The four types of boxes within Document Box
includes:
• CUSTOM BOX• JOB BOX• REMOVABLE MEMORY BOX• FAX BOX
CUSTOM BOXWith the CUSTOM BOX feature, workgroups can
register users and the user can temporarily store
documents in the CS-3060 or CS-2560 80GB
HDD. This is very useful when a document
containing a large number of pages needs to be
repeatedly printed. Users can store this document
in their assigned CUSTOM BOX and print the
document as my times as needed and select the
number of copies they require. Users who are
register individually can use the User Box for
secure printing and can save images that they
have scanned as well
JOB BOXWhen a particular application such as Repeat
Copy or Private Print is selected, Job Box is used
to store and output that specific job. Job Box also
supports Job retention mode, which is HP
compatible.
REMOVABLE MEMORY BOXThe Removable Memory Box feature, allow
users to print PDF documents directly from a
USB flash drive to the CS-3060 or the CS-2560,
providing companies with the portability and
security for the confidential documents they wish
to print.
FAX BOX The Fax Box can save fax documents, which are
received by facsimile communication. The Fax
Box can also be used for F-code Subaddress
confidential reception. (Fax option required).
F A X / S E N D
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 34
The CS-3060 and the CS-2560 optional
Fax/Network Fax/Internet Fax offers a Versatile
facsimile solution that allow small to mid-size
workgroups to send and receive faxes both at the
devices and from any network desktop computer.
Optional Fax System (M)(Up to two (2) Fax Systems can be installed)
Fax Specifications include:
Type• Fax/Network Fax/Internet Fax
• Super G3 Fax
Speeds• Quick Scan Speed: 2 seconds per page
• Transmission Speed: Approx. 3 seconds p/p
• Modem Speed: 33.6 kbps w/ Auto Fallback
Data Compression• JBIG
• MMR
• MR
• MH
Memory• Fax Memory: Shared System Memory
Speed Dials• One Touch Dial - 100 Numbers
• Abbreviated Dial - Search up to 2,000
Numbers
• Group Dial - Up to 500 Numbers (Group
Address)
Network Fax Driver• KM Network Fax Driver
Reports• Transaction Report
• Activity Report
• Departmental Management Report
Fax Address Book• Consolidated Address Book
Additional Fax FeaturesFax System (M) also offers some additional
features which may require options such as
duplex to be installed. These features include:
• Duplex TX/RX
• 11 x 17 Faxing
• Image Rotation
• Confidential TX/RX
New and Improved Fax CapabilitiesThe CS-3060 and CS-2560 provide any
connected workgroup to all of the fax features on
these new models, including Network Faxing and
Internet Fax.
For the small to mid-size business, the ability to
fax directly from the desktop will result in,
increased productivity. Considering that most
documents are created at the desktop, the ability
to send a fax directly from the PC eliminates the
need to print the document first. The CS-3060
and the CS-2560 can also receive incoming
faxes and route the fax to the appropriate
network shared folder.
Access to the optional Fax Functions on the new
CS-3060 and CS-2560 are available under the
Send screen on the TSI.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 35
Internet FaxAnother advantage of the CS-3060 and the
CS-2560 is the ability to fax via the internet. The
Fax System (M) will allow business to utilize
their network for sending and receiving faxes
using their existing TCP/IP connection. With
internet fax, users can send faxes to fax
server/gateway or any other device that allows
the reception of internet faxes. The benefit of
sending faxes via the internet is that there is no
software to install; customers do not need a
dedicated telephone line and customer will not
incur any long distance charges when sending
faxes outside their area code.
KM Network Fax DriverThe process of sending a document from the
desktop requires the KM Network Fax Driver,
which installs locally in the PC Printer Folder.
Users electing to PC Fax would access this Fax
Driver in the same manner as printing a
document, so training to use the KM Network
Fax Driver is kept at a minimum.
The KM Network Fax driver is fairly simple,
giving the user control over the media size, page
direction and imaging mode details.
Once the command to PC Fax has been
selected using the “OK” button, the job spools to
the local queue and the Transmission Control
dialogue box appears. Transmission Control is
where all of the necessary TX settings are
selected.
Destination AddressesFax destinations are set once the
Transmission Control TX Settings appear.
These addresses can be set manually as
needed.
Consolidated Address BookThe Consolidated Address Book located at the
device level is for Send Functionality, namely
Scan and Fax. The Consolidated Address
Book allows for businesses to store up to
2,000 destinations with e-Mail destinations or
Fax numbers. Combined with the standard
LDAP for Scan to e-Mail function, the
CS-3060 and CS-2560 provide a strong
competitive advantage for any small
workgroup.
P R O D U C T O P T I O N S
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 36
The CS-3060 and CS-2560 MFPs come well
equipped with standard features that provide a strong
competitive edge. To further extend our competitive
edge, Copystar offers a variety of paper handling,
finishing and other options to better meet the
requirements of your customers.
A configuration chart can be found in the Product
Overview Section.
500 x 2 Universal Paper Drawer (PF-670)For companies that require the flexibility, the PF-670
Dual Paper Drawers can be added. The PF-670
offers a 500 x 2 configuration that can accept paper
sizes from statement to ledger (5 ½” x 11 to 11 x 17”).
Paper weights from 16 to 32lb. Bond are accepted.
With the PF-670 installed, the paper capacity of the
CS-3060 and CS-2560 is increased from 1,200
sheets to 2,200 sheets from five sources. With the
ability to run sizes from statement to ledger,
workgroups in the financial or legal markets will find
this configuration beneficial,. making the CS-3060
and the CS-2560 competitive products in these
markets.
Finishing / Output OptionsThe CS-3060 and CS-2560 can be installed in
customer environments where document finishing is
a requirement. The CS-3060 and CS-2560 offer both
an internal finisher for space saving convince as well
as a 1,000 sheet finisher with stapling features.
1,000 Sheet Single Staple Finisher (DF-730)For customers that have basic finishing
requirements, the CS-3060 and CS-2560 can be
configured with the DF-730 1,000 sheet finisher. The
DF-730 can add a single staple to up to 30 sheets
letter or 20 sheets legal and ledger sizes.
Internal Finisher (DF-670)If space is an issue and finishing is required, the
CS-3060 and CS-2560 can be configured with the
DF-670 Internal Finisher. The finisher is installed in
the open space below the control panel and can
staple 30 sheets of 8 ½” x 11”, and 20 sheets of 8 ½”
x 14 and 11” x 17” sizes. Up to 500 sheets (Letter)
can be stacked using the DF-670.
Job Separator (JS-670)The JS-670 Job Separator can also be installed below
the control panel of the CS-3060 and CS-2560. This
option provides users with the ability to direct specific
job type, like faxes to a designated holding area. This
will allow users to differentiate between different job
types. The JS-670 can stack up to 100 sheets of
paper.
Reversing Automatic Document Feeder (DP-670)The CS-3060 and CS-2560 can be configured with an
optional DP-670 Reversing Automatic Document
Feeder. With simplex scanning speeds for both
models of 50 PPM at 300 DPI in monochrome and 15
PPM Color, the CS-3060 and CS-2560 are excellent
candidates for small workgroup scanning functions.
The DP-670 can handle up to 75 originals with paper
weights ranging from 16 lb to 60 lb paper in simplex
mode, and 18 lb to 45 lb in duplex mode. The DP-670
is also Section 508 compliant with the ability to limit its
opening to 60 degrees, or fully open at 15 degrees.
Letter 8 1/2 x 11
Legal 8 1/2 x 14
Ledger 11 x 17
Media Sizes
Model OutputSpeed
Scan Speed(Mono)
Scan Speed(Mono)
Scan Speed(Color)
KM-2560 25 PPM 50 OPM @300 dpi
30 OPM @400/600 dpi
15 OPM @300/400/600dpi
KM-3060 30 PPM 50 OPM @300 dpi
30 OPM @400/600 dpi
15 OPM @300/400/600dpi
SCAN MODE
600 DPI Color Scan/ Duplex Color Scan requires 1GB RAM
Model Output Speed Scan Speed (Mono)
KM-2560 25 PPM 30 OPM @300/400/600 dpi
KM-3060 30 PPM 30 OPM @300/400/600 dpi
COPY MODE
S O L U T I O N S
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 37
Copystar Solutions are an integral part of your marketing strategy when presenting the Copystar
CS-3060 and CS-2560 to your clients. Explaining these solutions to the customers is one of the
ways that Copystar Dealers will be able to target customer applications and provide a beneficial
solution.
Whether your customers are interested in Security, Document Capture or Management, Output or
Device Management, or Document and Application Creation, Copystar offers a wide variety of
Solutions targeting market requirements and customer’s workflow demands.
With the CS-3060 and CS-2560, new opportunities for KYOcapture Express, iTag and
KYOcapture sales may present themselves, and customers will recognize the added benefits of
color scanning, and the boost in productivity these features provide.
Companies focusing on a compliance and security strategy will see the addition of Data Security
Kit (C), and the UG-30 PDF Enhancement Kit especially valuable. Combined with standard
features like Document Box, network security and Private Print enables Workgroups and
Departments to adhere to stricter guidelines, depending on the business directive in place.
Copystar is constantly expanding the boundaries of all of it’s Products and Solutions, and will
continue to do so with the new Small Workgroup MFPs. As new challenges and market demands
arise, Copystar is committed to meet these challenges with innovative thinking and design.
Target: SMBSimlified Document Capture
Target:Workgroup/DepartmentDocument Management Solution
Target: EnterpriseDocument Capture Workflow solution
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 38
KYOcapture Express is the latest edition to the
Copystar’s KYOsolutions line of products.
KYOcapture Express is middleware that
mediates between two separate products or
programs, allowing any Copystar supported
MFP to scan to a Document/Content
Management System or back-end right from the
control panel of the MFP.
The KYOcapture Express software lets small to
mid-size businesses create workflows that
eliminate manual document processing by
classifying documents and extracting valuable
data that is crucial for any business application.
Less manual work translates to improve ROI!
KYOcapture Express enabled workflows lets
users streamline information management, right
from the point where documents enters the
office and / or workgroup. KYOcapture Express
can instantly and securely capture documents
from any Copystar’s MFP device and processes
can be performed on these documents such as
optical character recognition, converting
documents into various formats such as PDF,
WORD, EXCEL, etc. and indexing. Once the
document is captured and processed,
KYOcapture Express will route the documents
to the appropriate destination, allowing users to
share, search, retrieve and work with these
documents more efficient and easily.
KYOcapture Express uses the same core
technology as KYOcapture, focusing on the
necessities of the small to mid-size business
operation.
KYOcapture Express key features included:• Capture paper documents from any
Copystar MFP
• Index paper or electronic documents
before storage
• Scan once and deliver to multiple
destinations
• Personal workflows with network
authentication
• Convert scanned documents into
various formats (searchable PDF,WORD,
EXCEL, etc.)
• Enhance image quality with over 2
dozen filters (Option)
• Read barcodes to use as
document index metadata (Option)
An upgrade path to KYOcapture is also
available when the workflow process evolves
and businesses require more advance
capture, processing and routing capabilities.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 39
With iTag, Small Businesses and
workgroups/departments within a company
can utilize the framework of KYOcapture in
an all-in-one, end to end solution.
iTag features the following components:• DellTM Server
• Microsoft Windows® Server
2003
• KYOcapture Device License
• iTag Validation Station
• Microsoft SharePoint Services w/
15 Client Access Licenses
• System Kiosk
Connected to a Copystar MFP as the front
end for scanning documents, iTag provides
the companies with a simple, fast,
collaborative, productive and flexible
Document Management Solution.
Copystar’s iTag Document Management
Solution is designed for the Small
Business, Workgroup and Department
that requires an easy to use solution that
includes the back-end repository for
archival.
Developed by Kyocera Mita America, Inc.,
iTag is an industry first, responding to
growing market needs and changes within
the Document Management community.
iTag’s target market is the smaller
business model, which has been typically
ignored by Enterprise level solutions that
may be cost-prohibitive and difficult to
implement. iTag is designed to be easy to
understand, simple to install and
configure, and most importantly, simple to
use for every customer.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 40
KYOcapture is a Document CaptureWorkflow Solution that integrates with the new
CS-3060 and CS-2560 for Content
Management customers.
KYOcapture is a server-based application,
designed to work within existing Content
Management systems and structures. Now,
companies that rely on these Content
management systems can integrate products
like the CS-3060 and CS-2560 into the
environment, deployed as a printer and copier,
realizing a huge savings over installing multiple
devices on the network. KYOcapture also offers
Network Authentication and ABMSync (Address
Book) components, available as options.
From the Control Panel and Touch Screen
Interface (TSI), users will be able to access any
supporting database or Content Management
software that is crucial to their business.
Complete workflows can also be created within
KYOcapture, so multiple destinations and
applications are possible.
KYOcapture’s key features include:
• Automated document capture from the new
Workgroup MFPs, directly from the Color TSI
• Seamless integration with existing Content
Management systems
• Centralized control of all workflow and device
management
• Custom indexing from the TSI for improved
efficiency
• Drag and drop interface for workflow creation
and adaptation/updating
• Open architecture
• Bi-directional communication for accurate
and quick indexing from TSI
• Flexible and scalable
• Many value-add options
Capture/Process/Route are the ideals that
the KYOcapture solution are built upon. What
makes KYOcapture so unique is the
integration of Copystar MFPs with the
framework of the NSi product, AutoStore.
Capture/Process/RouteFilling in all of the holes of the
Capture/Process/Route workflow has
always been a challenge for our industry.
One side of the triangle may be strong
while the next is adequate and the last,
non-existent. KYOcapture offers a fully-
realized triangle solution, one of the most
comprehensive in the industry.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 41
CaptureThe Capture portion of the triangle is
accomplished directly from the MFP, namely the
new CS-3060 and CS-2560 MFPs. Directly from
the Color Touch Screen, users can select the
desired workflow or database, and from the
QWERTY keypad on the TSI, enter any
pertinent information for indexing. Documents
can be scanned from the 75 Sheet Document
Processor, which is capable of batch scanning,
saving valuable time over a scanner that offers
less functionality. Since the new workgroup
MFPs can scan in color as well as monochrome,
companies will see a true value-add to this
solution integration. Once scanned, documents
are quickly sent through the network to the
intended destination.
ProcessOnce a document is captured, a specific
Process (or processes) are set in motion,
depending on the workflow creation. Documents
and information can be extracted, reformatted,
indexed via OCR, or encrypted. Some of the
Processes that can be accomplished include:
• Optical Character Recognition (OCR)
• Forms Recognition
• Basic Image Processing
• Virtual Image Processing
• Barcode Recognition
• Document Encryption
• PDF Server
• Watermark
• VB/Java Scripting
Every Process is configurable, as well as
customizable, so existing infrastructure do not
need to be changed to integrate
KYOcapture.
RouteThe ability to Route has always been the
area most-lacking in a solution offered in our
industry. Quite simply, Enterprise customers
are not interested in “turn key” solutions from
Imaging vendors that have absolutely nothing
to do with how they accomplish their tasks.
Integration within a current structure is
imperative to these companies, and
KYOcapture does exactly that. Some of
these destinations include:
• Documentum D5
• Documentum ApplicationXtender
• Domino.Doc
• SharePoint Portal Server
• Hummingbird
• iManage
• OpenText LiveLink
• Lan Fax
• FTP
• Folders & Directories
• IXOS
• Lotus Notes/Domino
• Microsoft Exchange
• ODBC Databases
• Send To PC
• SMTP
• TRIM
• VB/Java Scripts
By integrating with applications that makes
business run, KYOcapture will define new
possibilities in your sales efforts. KYOcapture features asimple drag and drop GUIthat allows users tocreate and updateworkflows quickly andefficiently.
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 42
Data Security Kit (C)The optional Data Security Kit (C) will provide
customers concerned with security and
maintaining confidentiality the peace of mind
that data cannot be gained from the standard
80GB Hard Drive of the new CS-3060 and
CS-2560.
Selling this optional feature will give your
customer the following benefits:
• ISO 15408 Compliance
• Protect Confidential Documents
• Reduces security risks
• Designed for every environment
In many of the companies or entities you will
market these products, security will be a
significant factor. In fact, most of these clients
will have a designated Security Manager orAdministrator who may be instrumental in any
decision-making process when you propose
your products. This person should be contacted
early in the Sales Cycle to answer any and all
objections or questions, and ensure positive
buy-in before the final decision is made. Doing
this will also show that you are proactive, and
interested in the customer’s business and
processes.Note - Due to ISO guidelines, Data Security Kit (C) hasa serial number identity and cannot be installed inmore than one device.
UG-30 PDF Enhancement KitThe UG-30 PDF Expansion Kit consists of two
components:
• PDF Compression
• PDF Encryption
The UG-30 option comes complete with a USB
Flash Drive that is installed in one of the USB
ports on the single board controller. Each
UG-30 kit has a unique serial number, and can
only be installed with a single MFP. Companies
who have special requirements for document
transmission or archival may find the UG-30
option very valuable.
PDF CompressionThe PDF Compression component is an
advantage for companies looking to utilize the
standard Color Scanning on the CS-3060 and
CS-2560. With Copystar’s new PDF
Compression, the text and photo (or image)
areas of a scanned document are divided, and
a suitable image compression is applied. File
sizes can be reduced for document storage in
a network folder.
Note: With PDF Compression turned on, scanned
images no longer have the best image quality for
document output.
PDF EncryptionFor companies interested in a high level of
document security when scanning, PDF
Encryption allows users to set a PDF
password at the Control Panel. Once the
document reaches the intended destination,
the password is required, maintaining the
integrity of the document from anyone not
authorized to access the PDF. Note: PDF Encryption supports 128bit encryptionfor Acrobat 5.0 and later and 40bit encryption forAcrobat 3.0 or later.
R e l i a b l i t y
C S - 2 5 4 0 / C S - 3 0 4 0 P R O D U C T G U I D E 43
Long Life TechnologyThe CS-3060 and the CS-2560 like all of the
Copystar’s products incorporates the long life
consumables, industry leading yields, and
preventive maintenance making the CS-3060
and the CS-2560 a real benefit for the small to
mid-size business.
DrumThe CS-3060 and the CS-2560 utilize
Copystar’s Amorphous Silicon (ASi) Drum for
imaging. By including the ASi Drum, Copystar
can manufacture products that have higher
drum yields when compared to other
manufactures’ products in the same segment.
Monocomponent TonerThe CS-3060 and the CS-2560 are
Monocomponent products so no developer
needs to be added between Preventive
Maintenance schedules, as is the case with
some of the competitive dual component
models. Monocomponent Technology is
beneficial to the customer, since the image
printed on the page does not degrade over time
with developer depletion during normal imaging.
Customers with the new CS-3060 and the
CS-2560 only need to replace toner when
required, simplifying the interaction with these
MFP’s. Toner replacement is a straightforward
process, with the sealed toner container
accessed from the front. The toner container
slides easily into the space just above the
engine quickly and without any mess.
The Toner Container for the CS-3060 and the
CS-2560 is exclusive for the MFPs and cannot
be interchanged with printer toner. The rated
yield for the toner used by the CS-3060 and
the CS-2560 is 20,000 impressions based on
a 6% fill ratio.
The TK-677 Toner Container will have an
embedded Radio Frequency Identification
(RFID) chip to ensure that customer’s use the
proper toner for these products.
Preventive MaintenancePreventive Maintenance or PM is the interval
determined for the Maintenance Kit
replacements, and is set to identify when these
replacement are necessary to ensure the MFP
is working up to manufacturer specifications.
During the PM for the CS-3060 and the
CS-2560, the only item that is replaced is the
maintenance kit, which consists of the drum
assembly, developer assembly, fixing unit,
transfer assembly and miscellaneous feed
rollers. By providing all of the required parts in
one kit, Service Technicians can perform a PM
very quickly, with the whole process taking
between 20 to 30 minutes. Customers
requiring a PM at the appropriate intervals will
be up and running quickly, minimizing
downtime.
Model Output Speed ASi Rated Yield
KM-3060 30 PPM 300,000
KM-2560 25 PPM 300,000
S u m m a r y
C S - 2 5 4 0 / C S - 3 0 4 0 P R O D U C T G U I D E 44
The small to mid-size business have the same challenges that big business has but may
not have the financial resource to simplify the daily tasks of their workgroup environment.
With this in mind Copystar developed two new outstanding products that will facilitate the
challenges that the small to mid-size business has to face on a daily bases. The new
CS-3060 and the CS-2560 will provided the small to mid-size business with all of the tools
necessary to improve the paperwork flow process at an affordable price.
With the increasing demand for solutions, security and document management,
KYOcapture Express, iTag and KYOcapture will allow dealers to penetrate new markets
and meet the demands for these types of solutions that are found in today’s market place.
With its ASi Drums, Preventive Maintenance schedules, monocomponent technology for
long life and outstanding image quality, Copystar continues to be a testament that our
company and our Authorized Dealers are committed to the customer.
The CS-3060 and the CS-2560 are products and solutions that will be a benefit to any
workgroup looking for a device that is affordable, reliable and easy to operate and I look
forward to the success of these products.
Good Selling
Victor Moro
Product and Solutions Manager
Kyocera Mita America, Inc.
Commitment
T R A D E M A R K S
C S - 3 0 6 0 / C S - 2 5 6 0 P R O D U C T G U I D E 45
Macintosh is a trademark of Apple Computer, Inc.
Microsoft is a registered trademark of Microsoft Corporation.
Windows, Windows NT and Windows XP and Vista are registered trademarks of Microsoft
Corporation.
Novell and NetWare are registered trademarks of Novell, Inc.
PostScript is a registered trademark of Adobe Systems, Inc.
AutoStore is a registered trademark of Notable Solutions, Inc.
All other products or services identified throughout this Product Guide are trademarks, or
registered trademarks, or their respective companies. They are used throughout the book
in editorial fashion only and for the benefit of such company. No such uses, or the use of
any trade name, are intended to convey endorsement or other affiliation with this Product
Guide.
NOTE: The information for this manual was gathered from several sources, whichwe deem reliable and to the best of our knowledge, are accurate. However, Kyocerashall not be responsible for any inaccuracies contained herein. This manual is forthe sole information of our Dealers and Resellers. It is not to be used by any otherparty.
Copyright ©2007 Kyocera Mita America, Inc.
Reproduction of the information contained herein is prohibited by law.