How many seconds of video delay do you need?

Providing up to ten seconds of 3Gb/s delay, 43 seconds of HD delay and four minutes of SDdelay, the five ViViD variable video delay lines are ideal for matching any short or long delaysin your system.

Features include integrated fibre I/O, relay bypass protection, video proc-amp, signal reportingand the ability to delay any embedded data. You can even use the ViViD 3GS and ViViD 3GS-20to delay and synchronise at the same time – providing a neat single board solution.

You'll also save rack space: you can fit up to 12 of these space-saving modules in 2U.

No one else does the range of video delays that Crystal Vision does.

Video Delays

Choose the perfect variablevideo delay for your 3Gb/s,HD or SD application: availablein five versions

Match any video delays inyour system: including virtualstudio graphics, MPEGencoders/decoders, audioprocessing, HD radio links,satellite links and profanitydelays

Maximum SD delay: 5.5seconds (ViViD 3G/3GS), 110seconds (ViViD 3G-20/3GS-20)and 238 seconds (ViViD HD-40)

Maximum HD delay: onesecond (ViViD 3G/3GS), 20seconds (ViViD 3G-20/3GS-20)and 43 seconds (ViViD HD-40)

Maximum 3Gb/s delay: 0.5seconds (ViViD 3G/3GS) and tenseconds (ViViD 3G-20/3GS-20)

Get the exact delay you need:adjustable in steps of seconds,frames, lines and pixels

Delay and synchronise usingone board: ViViD 3GS and 3GS-20 include a framestoresynchroniser timed to anexternal analogue reference

Optimise the video: with RGB and YUV lift and gainadjustments on the ViViD 3Grange

Protect your programmeoutput: with optional relaybypass protection

You won't be limited by cablelengths: with optionalintegrated fibre input/outputconnectivity on the ViViD 3Grange

Save yourself a DA in yoursystem design: with up to fourdelayed outputs (three on ViViDHD-40)

Space-saving: 100mm x266mm modules allow 12 videodelays in 2U (six in 1U and twoin desk top box)

Flexible control: select fromboard edge, front and remotepanels, GPIs, SNMP, PC softwareor your web browser

Want the delay figures in frames? Look at the comparison chart on page 4for full information on the minimum and maximum delays available.

Flexible adjustments make itvery easy to select the exactdelay time you require...down to the pixel! With aminimum setting of a fewlines, the delay is adjustablein seconds, frames, lines andpixels.

The ViViD 3GS and ViViD 3GS-20 variants both include a framestoresynchroniser timed to an external Black and Burst or tri-level syncsanalogue reference – meaning you can use one board to apply a longdelay to a video path and lock the signal to a station reference at the sametime.

The ViViDs delay the entire video stream, with embedded audio andancillary data staying with the associated video – allowing use inembedded areas.

DELAY AND SYNCHRONISE – USING ONE BOARD

DELAY EVERYTHING

GET THE EXACT DELAY YOU NEED

WHAT CAN I USE THEM FOR?

Use ViViD 3G anywhere you need tomatch short delays in your system. Itworks with 3Gb/s, HD and SD sources.

Use ViViD 3GS to match short delays inyour system when you also need tosynchronise at the same time. It works with3Gb/s, HD and SD sources.

Use ViViD 3G-20 for matching long delaysin your system. It works with 3Gb/s, HD and

SD sources.

Use ViViD 3GS-20 for matching long delaysin your system when you also need tosynchronise at the same time. It works

with 3Gb/s, HD and SD sources.

Use ViViD HD-40 for matching verylong delays in your system –up to four minutes in SD! Itworks with HD and SD sources.

THE FIVE VIDEO DELAYS

HOW MUCH DELAY DO YOU GET?

ViViD 3G and ViViD 3GS

ViViD 3G-20 and ViViD 3GS-20 ViViD HD-40

Maximum SD delay

5.5 secs (625 line)4.5 secs (525 line)

110 secs (625 line)91 secs (525 line)

238 secs

Maximum HD delay

1 sec (1080i50,720p50, 1080PsF23.98and 1080PsF24)

0.8 secs (1080i59.94and 720p59.94)

20 secs (1080i50,720p50,

1080PsF23.98 and1080PsF24)

16 secs (1080i59.94and 720p59.94)

43 secs

Maximum 3Gb/s delay

0.5 secs (1080p50)0.4 secs (1080p59.94)

10 secs (1080p50)8 secs (1080p59.94)

Flexible delay adjustments

Crystal Vision offers a range of five variable videodelays to match every application and budget. Sowhich one do you need?

The ViViDs are suitable for a wide variety of applications – wherever youneed to match system delays elsewhere in your equipment chain.

They are perfect for the virtual studio.Use them to offset the delay caused bythe graphics generators – delaying thecamera by the same amount as thevirtual set graphics so that the video feedand graphics both reach the chromakeyer at the same time.Compensate for MPEG encoders and

decoders to co-time your transmissions.Use them in audio processing

applications – such as to match yourvideo to audio that's been delayed byDolby E encoding or decoding. You'llkeep lip-sync and make cutting betweenvideo sources easy.

Help OB vehicles using MPEG-compressed HDradio links to remotely control wireless hand-heldcameras by delaying the other signals.Or match the delay caused by a satellite link.The longer delay lines are perfect for use as part

of a profanity delay system on live broadcasts –preventing expletives, bloopers, wardrobemalfunctions, fits of coughing or technicalproblems from making it to air.

Match your virtual graphics

Match your MPEG encoders anddecoders

*@!#Use as part of a profanity

delay system

Compensate for audio processing delays

The ViViD video delays will save you rackspace. These 100mm x 266mm modulesare housed in Crystal Vision's standardrack frames, with up to 12 boards fittingin 2U.ViViD HD-40 is used with the RM44

frame rear module to access the inputsand outputs, while the ViViD 3G range

can be used with three different frame rear modules: either the standardRM41, the RM57 for fibre applications or the RM67 where relay bypassprotection is required.The RM44 and RM67 rear modules both help to maintain programme

output by providing relay bypass protection of the input in the event ofpower failure or board malfunction or removal.

SAVE YOURSELF RACK SPACE – AND PROTECT YOUR OUTPUT

Offset satellite link delays

The ViViD 3G range includes a video proc-amp for picture optimisation andto help maintain colour fidelity, with RGB and YUV lift and gain adjustments.

OPTIMISE THE VIDEO

Optimise your picture

If you need to delay signals from beyond your local equipment bay, it'seasy to give the ViViD 3G range integrated fibre connectivity – and stillonly use a single frame slot. Just order either the FIP fibre input option orFOP fibre output option.Designed for SMPTE 297-2006 short-haul applications, the FIP is used

to receive an optical input and the FOP to transmit an optical output usinga Class I laser. With a FIP fitted you can select your video input source tobe taken either from the input BNC or the optical input.Having the fibre integral to the board reduces the need to use up

additional rack space for separate fibre optic transmitters and receivers –as well as saving you money.The ViViD 3G range can also support CWDM lasers if required.

FIBRE CONNECTIVITY – ON THE BOARD

You will get four delayed outputs with the ViViD 3G range and three outputswith ViViD HD-40 – potentially removing the need for a distribution amplifierin the system, and so saving you money and rack space.

SAVE YOURSELF A DA IN YOUR SYSTEM DESIGN

Easy to set up and use, the flexible control options include board edgeswitches, an integrated control panel on the AE frames, the VisionPanelremote control panel, SNMP, the Statesman Lite PC software and theVisionWeb web browser control.16 presets will save you time – allowing different delay values to be

assigned then recalled automatically by the studio control system using GPIs.Signal monitoring is available on the ViViD 3G range, with warnings of

any problems provided via SNMP traps or GPI outputs. The full list of availablealarms are input missing, video black, video frozen and input audio missing –with reference missing and reference incompatible additionally available onViViD 3GS and ViViD 3GS-20. The video black and video frozen parameterscan be delayed before an alarm is asserted to prevent false alarming duringbrief video pauses.

FLEXIBLE CONTROL

3G orHD orSD

3G or HDor SD x 4

ViViD 3GViViD 3G-20RM41

Single height

3G orHD orSD(BNC)

3G or HDor SD x 3

ViViD 3GViViD 3G-20RM57

Fibre in or outSingle heightOptical

in

Optical out(3G or HDor SD)

NB. Choose between fibre in or fibre outby selecting FIP or FOP fibre option

3

3G orHD orSD

3G or HDor SD x 4

ViViD 3GViViD 3G-20RM67

(Relay bypassprotection)

Single height

HD orSD

HD or SD x 3

VIVID HD-40RM44

(Relay bypassprotection)

Single height

3G orHD orSD(BNC) 3G or HD

or SD x 3ViViD 3GSViViD 3GS-20

RM57Fibre in or outSingle height

Opticalin

Optical out(3G or HDor SD)

NB. Choose between fibre in or fibre outby selecting FIP or FOP fibre option

3G orHD orSD

3G or HDor SD x 4

ViViD 3GSViViD 3GS-20

RM41Single height

Black &Burstref ortri-levelsyncs

3G orHD orSD

3G or HDor SD x 4

ViViD 3GSViViD 3GS-20

RM67(Relay bypassprotection)

Single height

Black &Burstref ortri-levelsyncs

Black &Burstref ortri-levelsyncs

REAR MODULE INPUTS/OUTPUTS

WHICH VIDEO DELAY DO YOU NEED?

ViViD 3G ViViD 3GS ViViD 3G-20 ViViD 3GS-20 ViViD HD-40

Works with SD � � � � �

Works with HD � � � � �

Works with 3Gb/s � � � �

Maximum SD delay (in seconds)

5.5 secs (625 line)4.5 secs (525 line)

5.5 secs (625 line)4.5 secs (525 line)

110 secs (625 line)91 secs (525 line)

110 secs (625 line)91 secs (525 line)

238 secs

Maximum SD delay (in frames) 137 frames 137 frames 2750 frames 2750 frames

5950 frames (625 line)7132 frames (525 line)

Minimum SD delay 3 lines 3 lines 3 lines 3 lines 46us

Maximum HD delay (in seconds)

1 sec (1080i50, 720p50,1080PsF23.98 and

1080PsF24)0.8 secs (1080i59.94

and 720p59.94)

1 sec (1080i50, 720p50,1080PsF23.98 and

1080PsF24)0.8 secs (1080i59.94

and 720p59.94)

20 secs (1080i50, 720p50,1080PsF23.98 and

1080PsF24)16 secs (1080i59.94

and 720p59.94)

20 secs (1080i50, 720p50,1080PsF23.98 and

1080PsF24)16 secs (1080i59.94

and 720p59.94)

43 secs

Maximum HD delay (in frames) 25 frames 25 frames 500 frames 500 frames

1075 frames (1080i50)1280 frames (1080i59.94)

2150 frames (720p50)2500 frames (720p59.94)

Minimum HD delay 2 lines 2 lines 2 lines 2 lines 12us

Maximum 3Gb/s delay (in seconds)

0.5 secs (1080p50)0.4 secs (1080p59.94)

0.5 secs (1080p50)0.4 secs (1080p59.94)

10 secs (1080p50)8 secs (1080p59.94)

10 secs (1080p50)8 secs (1080p59.94)

Maximum 3Gb/s delay (in frames) 25 frames 25 frames 500 frames 500 frames

Minimum 3Gb/s delay 2 lines 2 lines 2 lines 2 lines

Video delay adjustable in Seconds, frames, lines and pixels

Seconds, frames, lines and pixels

Seconds, frames, lines and pixels

Seconds, frames, lines and pixels

Seconds, frames, lines and pixels

Number of video outputs (max) 4 (3 if fibre I/O) 4 (3 if fibre I/O) 4 (3 if fibre I/O) 4 (3 if fibre I/O) 3

Video framestore synchroniser � �

Analogue reference SD Black and Burst or HDtri-level syncs

SD Black and Burst or HD tri-level syncs

Passes entire video streamincluding embedded audio � � � � �

Audio delay Follows video Follows video Follows video Follows video Follows video

Video proc-amp (RGB and YUV liftand gain controls) � � � �

Video and audio alarms 4 6 4 6

Number of presets 16 16 16 16 16

Relay bypass protection �(RM67 option)

�(RM67 option)

�(RM67 option)

�(RM67 option)

�(as standard)

Fibre I/O � � � �

Boards in 2U 12 12 12 12 12

Rear module used RM41, RM57 and RM67 RM41, RM57 and RM67 RM41, RM57 and RM67 RM41, RM57 and RM67 RM44

RM41 used with ViViD 3G and ViViD 3G-20

HD/SD OUT 2

HD/SD OUT 3

HD/SD OUT 4

HD/SD OUT 1

NCHD/SD IN

RM41 used with ViViD 3GS and ViViD 3GS-20

HD/SD OUT 2

HD/SD OUT 3

HD/SD OUT 4

HD/SD OUT 1

SYNCIN

HD/SD IN

RM57 used with ViViD 3G and ViViD 3G-20

HD/SD IN

NC HD/SD OUT 2

HD/SD OUT 3

OPTICAL IN OR OUT

HD/SD OUT 1

R

RM57 used with ViViD 3GS and ViViD 3GS-20

HD/SD IN

SYNCIN

HD/SD OUT 2

HD/SD OUT 3

OPTICAL IN OR OUT

HD/SD OUT 1

For standard applications For fibre applications

HD/SDOUT 2

HD/SD OUT 3(SWITCHED)

HD/SDOUT 4

HD/SDOUT 1

NCHD/SD IN

RM67 used with VIVID 3G and VIVID 3G-20

HD/SDOUT 2

HD/SD OUT 3(SWITCHED)

HD/SDOUT 4

HD/SDOUT 1

SYNC IN

HD/SDIN

RM67 used with VIVID 3GS and VIVID 3GS-20

R

For relay bypass protection applications

RM44 used with ViViD HD-40

HD/SDIN

HD/SDOUT 1

(SWITCHED)

HD/SDOUT 3 NC

HD/SDOUT 2

For all ViViD HD-40 applications

REAR MODULE CONNECTIONS

THE INPUTS AND OUTPUTS

Linux CPU

GPIs

Remote controlBoard edge control

Input monitoring

Optical output (optional)[3Gb/s, HD or SD]

3Gb/s or HD orSD x 4 (x 3 ifRM57 with FIPor FOP fitted)

3Gb/sor HDor SD

FIP

Optical input (optional) [3Gb/s, HD or SD]

Videoproc-amp

(RGB and YUV)

Variable video delay

3G: 2 lines – 25 frames (0.5 secs 50Hz and 0.4 secs 59.94Hz)

HD: 2 lines – 25 frames (1 sec 50Hz and 0.8 secs 59.94Hz)

SD: 3 lines – 137 frames (5.5 secs 625 line and 4.5 secs 525 line)

Control

Adjustable in seconds, frames, lines and pixels FOP

Equalise andreclock

3Gb/s or HD orSD output (withrelay bypassprotection onRM67)

RM67 relay bypass

Optical output (optional)[3Gb/s, HD or SD]

3Gb/s or HD orSD x 4 (x 3 ifRM57 with FIPor FOP fitted)

3Gb/sor HDor SD

FIP

Optical input (optional) [3Gb/s, HD or SD]

Videoproc-amp

(RGB and YUV)

Variable video delay

3G: 2 lines - 500 frames (10 secs 50Hz and 8 secs 59.94Hz)

HD: 2 lines - 500 frames (20 secs 50Hz and 16 secs 59.94Hz)

SD: 3 lines - 2750 frames (110 secs 625 line and 91 secs 525 line)

Linux CPU

GPIs

Remote controlBoard edge control

Control

Adjustable in seconds, frames, lines and pixels FOP

Equalise andreclock

3Gb/s or HD orSD output (withrelay bypassprotection onRM67)

RM67 relay bypass

Input monitoring

Optical output (optional)[3Gb/s, HD or SD]

3Gb/s or HD orSD x 4 (x 3 ifRM57 with FIPor FOP fitted)

3Gb/sor HDor SD

FIP

Optical input (optional) [3Gb/s, HD or SD]

Videoproc-amp

(RGB and YUV)

Videosynchroniser

Variable video delay

3G: 2 lines – 25 frames (0.5 secs 50Hz and 0.4 secs 59.94Hz)

HD: 2 lines – 25 frames (1 sec 50Hz and 0.8 secs 59.94Hz)

SD: 3 lines – 137 frames (5.5 secs 625 line and 4.5 secs 525 line)

Linux CPU

GPIs

Remote controlBoard edge control

Control

Adjustable in seconds, frames, lines and pixels

Tri-level syncs orBlack & Burst

analogue reference

FOP

Equalise andreclock

Input monitoring

3Gb/s or HD orSD output (withrelay bypassprotection onRM67)

RM67 relay bypass

Optical output (optional)[3Gb/s, HD or SD]

3Gb/s orHD or SDx 4 (x 3 ifRM57 withFIP or FOPfitted)

3Gb/sor HDor SD

FIP

Optical input (optional) [3Gb/s, HD or SD]

Videoproc-amp

(RGB and YUV)

Videosynchroniser

Variable video delay

3G: 2 lines - 500 frames (10 secs 50Hz and 8 secs 59.94Hz)

HD: 2 lines - 500 frames (20 secs 50Hz and 16 secs 59.94Hz)

SD: 3 lines - 2750 frames (110 secs 625 line and 91 secs 525 line)

Linux CPU

GPIs

Remote controlBoard edge control

Control

Adjustable in seconds, frames, lines and pixels

Tri-level syncs orBlack & Burst

analogue reference

FOP

Equalise andreclock

Input monitoring

3Gb/s or HD orSD output (withrelay bypassprotection onRM67)

RM67 relay bypass

VIVID 3G

VIVID 3G-20

VIVID 3GS

VIVID 3GS-20

HD orSDinput

Variable video delay

HD: 12µs - 43 secondsSD: 46µs - 238 seconds

Linux CPU

GPIs

Remote controlBoard edge control

Control

Adjustable in seconds, frames, lines and pixels

HD or SDoutput 1

HD or SDoutput 2

HD or SDoutput 3

RM44 relaybypass

Equalise andreclock

Input monitoring

VIVID HD-40

Crystal Vision Ltd. Lion Technology Park, Station Road East, Whittlesford, Cambridge CB22 4WL, England.

Tel: +44 (0)1223 497049 Fax: +44 (0)1223 497059 E-mail: sales@crystalvision.tv @crystalvisionuk www.crystalvision.tv

MECHANICALStandard Crystal Vision module266mm x 100mmWeight: 180gPower consumption: 11.9 Watts (plus0.6 Watts for FIP or FOP)

VIDEO INPUTOne 3Gb/s or HD or SD input270Mb/s or 1.5Gb/s or 3Gb/s serialcompliant to EBU 3267-E, SMPTE 259,SMPTE 292-1 and SMPTE 424/425-AThe video formats supported are 625,525, 720p50, 720p59.94, 1080i50,1080i59.94, 1080PsF23.98,1080PsF24, 1080p50 and 1080p59.943Gb/s cable equalisation up to 80musing Belden 1694A. HD/SD cableequalisation up to 140m with Belden1694A or equivalent (approx. 100mwith Belden 8281)Input return loss: -15dB for 50MHz to1.5GHzAuto data rate and video formatselection

VIDEO OUTPUTSUsing RM41 rear module: Fourreclocked and delayed 3Gb/s or HD orSD outputsUsing RM57 rear module with FIPfibre input option: Three reclockedand delayed 3Gb/s or HD or SDoutputs. Select between one fibre andone electrical inputUsing RM57 rear module with FOPfibre output option: Three reclockedand delayed 3Gb/s or HD or SD outputs,plus one copy of the output on fibreUsing RM67 rear module: Fourreclocked and delayed 3Gb/s or HD orSD outputs. The RM67 provides relaybypass protection to help maintainprogramme output. Anelectromechanical relay switch needspower to hold the switch in one stateand will revert to the other state(board bypass) on loss of power. Itprevents signal loss by mechanicallyconnecting the input to the thirdoutput on complete frame powerfailure or board removal270Mb/s or 1.5Gb/s or 3Gb/s serialcompliant to EBU 3267-E, SMPTE 259,SMPTE 292-1 and SMPTE 424/425-AOutput follows the input format

INTEGRATED FIBRE OPTIONSViViD 3G can be given integrated fibreconnectivity by fitting either the FIPfibre input option or FOP fibre outputoption. The chosen option should befitted at the factoryTo access the optical inputs or outputsan RM57 frame rear module must beusedWhen fitted with a FIP or FOP, ViViD3G can be housed in any frame slotposition but due to its extra height it isnot possible to place most StandardDefinition or audio boards directlyabove it when the ViViD 3G is in evennumbered slot positions. 3Gb/s and HDboards do not share this restrictionFIP and FOP meet the SMPTE 297-2006 short-haul specification, allowingoperation with single-mode and multi-mode fibreConnector type: SC/PCFIP:Optical wavelength: 1260-1620nmInput level maximum: -1dBmInput level minimum: Typical -20dBm(-18dBm 3Gb/s pathological)FOP:Optical power: Max -0.0dBm, min -5.0dBm (typical -2.0dBm or 630uW)Fibre pigtail: Single-mode 8/125uMOptical wavelength: 1290-1330nm(1310 typical)Extinction ratio: 7.5dBLaser safety classification: Class 1 (EN60825), Class I (21CFR1040.10)

STANDARD DEFINITION DELAYMinimum delay: 3 linesMaximum delay:ViViD 3G and ViViD 3GS: 5.5 seconds/137 frames (625 line); 4.5seconds/137 frames (525 line)

ViViD 3G-20 and ViViD 3GS-20: 110 seconds/2750 frames (625 line);91 seconds/2750 frames (525 line) Adjustable in steps of seconds, frames,lines and pixels

HIGH DEFINITION DELAYMinimum delay: 2 linesMaximum delay:ViViD 3G and ViViD 3GS: 1 second/25 frames(1080i50/720p50/1080PsF23.98/1080PsF24); 0.8 seconds/25 frames(1080i59.94/720p59.94)ViViD 3G-20 and ViViD 3GS-20: 20 seconds/500 frames(1080i50/720p50/1080PsF23.98/1080PsF24); 16 seconds/500 frames(1080i59.94/720p59.94)Adjustable in steps of seconds, frames,lines and pixels

3GB/S DELAYMinimum delay: 2 linesMaximum delay:ViViD 3G and ViViD 3GS:0.5 seconds/25 frames (1080p50); 0.4 seconds/25 frames (1080p59.94)ViViD 3G-20 and ViViD 3GS-20: 10 seconds/500 frames (1080p50); 8 seconds/500 frames (1080p59.94)Adjustable in steps of seconds, frames,lines and pixels

SYNCHRONISER TIMINGADJUSTMENTS (VIVID 3GS/3GS-20 ONLY)ViViD 3GS takes its timing from theexternal analogue reference and willautomatically synchronise sources upto one frame apart in timingThe timing can be fully adjusted usinghorizontal and vertical settings.Increasing the vertical setting will delaythe output relative to the reference inincrements of one line. Increasing thehorizontal setting will increase thisdelay in increments of approx. 74ns forSD and 13.5ns for HD

ANALOGUE REFERENCE (VIVID 3GS/3GS-20 ONLY)Tri-level syncs or analogue Black andBurst or video3Gb/s, HD or SD source can use eithertype of referenceWhen cross-locking it is necessary forboth the video input and reference toshare the same frame rateAmplitude of syncs 150mV to 600mVLink on PCB selects 75 ohmtermination or high impedance

VIDEO PROCESSINGVideo proc-amp for pictureoptimisation and to help maintaincolour fidelityRGB lift: Offset the colour componentby +/- 10%RGB gain: Modify the gain of thecolour component from +80% to+120%YUV lift: Offset the luminance, U andV components by +/- 10%YUV gain: Modify the luminance, Uand V gain from 0% to +200%

SIGNAL CHECKSChecks can be performed on aselection of video and audioparameters, with warnings of anyproblems provided via SNMP traps.Two GPI outputs can also be assigned tomonitor some of the video parameters –see GPI OUTPUTS section for detailsThe video parameters are: inputmissing, video black, video frozen,reference missing (ViViD 3GS/3GS-20 only) and referenceincompatible (ViViD 3GS/3GS-20 only).The audio parameter is: input audiomissingThe video black and video frozenparameters can be delayed before analarm is asserted to prevent falsealarming during brief video pauses

ANCILLARY DATA/EMBEDDED AUDIOPasses entire video stream, includingembedded audio and HANC and VANC

PRESETS16 user defined presets allow thestoring of board configurations

GPI INPUT LEVELSActive: pull to ground, pulled up to+5V through 10 kohm

GPI OUTPUT LEVELSElectrically: Open collector transistors30V, 270 ohm current limit resistors.Pulled up to +5V through 6800 ohm

GPI INPUTSFour GPI inputs can recall one of 16presets

GPI OUTPUTSTwo GPI outputs are reserved for alarmindication and may be assigned anynumber of the following video alarms:input missing, video black, videofrozen and (ViViD 3GS/3GS-20 only)reference missing

LED INDICATION OF:Power supplies okayInput presentSD/HD inputGPI output 5 activeGPI output 6 active

LOCAL CONTROLIntuitive board edge interface with twoselect buttons, shaft encoder and tencharacter alphanumeric display

REMOTE CONTROLControl from frame active front paneland remote panelStatesman allows control from any PCon a networkSNMP monitoring and controlavailable as a frame option

MECHANICALStandard Crystal Vision module

266mm x 100mmWeight: 200gPower consumption: 12 Watts

VIDEO INPUTOne HD or SD input270Mb/s or 1.5Gb/s serial compliantto EBU 3267-E, SMPTE 259 andSMPTE 292-1

The video formats supported are 625,525, 720p50, 720p59.94, 1080i50and 1080i59.94HD cable equalisation up to 140mwith Belden 1694A or equivalent(approx. 100m with Belden 8281). SD cable equalisation >250m Belden8281 or equivalentInput return loss: -15dB for 5MHz to1.5GHzAuto data rate and video formatselection

VIDEO OUTPUTSThree reclocked and delayed HD or SDoutputs using RM44 frame rear module270Mb/s or 1.5Gb/s serial compliantto EBU 3267-E, SMPTE 259 andSMPTE 292-1Relay bypass protection on the RM44helps maintain programme output. Anelectromechanical relay switch needspower to hold the switch in one stateand will revert to the other state(board bypass) on loss of power. Itprevents signal loss by mechanicallyconnecting the input to main output 1on complete frame power failure orboard removalOutput follows the input format

STANDARD DEFINITION DELAYMinimum delay: 46usMaximum delay: 238 seconds/5950frames (625 line) and 7132 frames(525 line)Adjustable in steps of seconds, frames,lines and pixels

HIGH DEFINITION DELAYMinimum delay: 12usMaximum delay: 43 seconds/1075frames (1080i50), 1280 frames(1080i59.94), 2150 frames (720p50)and 2500 frames (720p59.94)Adjustable in steps of seconds, frames,lines and pixels

ANCILLARY DATA/EMBEDDEDAUDIOPasses entire video stream, includingembedded audio and HANC andVANC

PRESETS16 user defined presets allow thestoring of board configurations

GPI INPUTSFour GPI inputs can recall one of 16presetsActive: pull to ground, pulled up to+5V through 10 kohm

GPI OUTPUTSOne GPI output shows input presentElectrically: Open collector transistors30V, 270 ohm current limit resistors.Pulled up to +5V through 6800 ohm

LED INDICATION OF:Power supplies okayInput presentSD/HD input

LOCAL CONTROLIntuitive board edge interface withtwo select buttons, shaft encoder andten character alphanumeric display

REMOTE CONTROLControl from frame active front paneland remote panelStatesman allows control from any PCon a networkSNMP monitoring and controlavailable as a frame option

VIVID 3G, VIVID 3GS, VIVID 3G-20 AND VIVID 3GS-20

VIVID HD-40

ViViD 3G 3G/HD/SD variable video delay lineViViD 3GS 3G/HD/SD variable video delay line with framestore synchroniserViViD 3G-20 3G/HD/SD long variable video delay lineViViD 3GS-20 3G/HD/SD long variable video delay line with framestore synchroniserViViD HD-40 HD/SD long variable video delay lineFIP Fibre input option for ViViD 3G range motherboardFOP Fibre output option for ViViD 3G range motherboard (For CWDM laser output

options, please contact Crystal Vision)Indigo 2AE 2U frame with active front panel featuring smart CPU and integrated control panel

for up to 12 Crystal Vision modules Indigo 2SE 2U frame with active front panel featuring smart CPU for up to 12 Crystal Vision modules Indigo 1AE 1U frame with active front panel featuring smart CPU and integrated control panel for

up to six Crystal Vision modules. Power supply redundancy available with Indigo 1AE-DP Indigo 1SE 1U frame with active front panel featuring smart CPU for up to six Crystal Vision modules.

Power supply redundancy available with Indigo 1SE-DP Indigo DT Desk top box with passive front panel for up to two Crystal Vision modules Indigo DTSE Desk top box with active front panel featuring smart CPU for up to two Crystal Vision

modulesRM41 Single slot frame rear module used for ViViD 3G range. Allows maximum number of

ViViD 3G in frame (12 in 2U, six in 1U, two in desk top box). Gives access to one 3Gb/s,HD or SD input and four 3Gb/s, HD or SD outputs

RM44 Single slot frame rear module used for ViViD HD-40. Allows maximum number ofViViD HD-40 in frame (12 in 2U, six in 1U, two in desk top box). Provides relay bypassprotection of the input to the main output. Gives access to one HD or SD input andthree HD or SD outputs

RM57 Single slot frame rear module used for ViViD 3G range. Allows maximum number ofViViD 3G in frame (12 in 2U, six in 1U, two in desk top box). Designed for applicationsusing fibre inputs or outputs. When using fibre input, allows you to select betweenone fibre and one electrical 3Gb/s, HD or SD input and gives out three 3Gb/s, HD orSD outputs. When using fibre output, gives access to one 3Gb/s, HD or SD input andfour 3Gb/s, HD or SD outputs (one on fibre and three on BNC)

RM67 Single slot frame rear module used for ViViD 3G range. Allows maximum number ofViViD 3G in frame (12 in 2U, six in 1U, two in desk top box). Provides relay bypassprotection of the input to the third output. Gives access to one 3Gb/s, HD or SD inputand four 3Gb/s, HD or SD outputs

VisionPanel 3U Ethernet remote control panel with touch screenVisionWeb Control VisionWeb web browser control included within frame softwareStatesman Lite PC Control SystemSNMP SNMP monitoring and control

Performance and features are subject to change. Figures given are typical measured values. VIDEODELAYS0516

SPECIFICATION

ORDERING INFORMATION