Upload
kris-spickler
View
148
Download
2
Embed Size (px)
Citation preview
INNOVATIVE TIMBER SPECIALISTS
STRUCTURLAM
Changing the way we build.www.structurlam.com
CROSS LAMINATED TIMBERCROSS LAMINATED TIMBERCROSS LAMINATED TIMBERCROSS LAMINATED TIMBER
CrossLam by Structurlam
• Material: SPF, Douglas Fir
• Grade: #2+, J-Grade, Lamstock
• Moisture content: 12 % +/- 2 %
• Bonding adhesive: Purbond - Polyurethane
• Layers: 3, 5, 7 and 9
• Lamella thickness 38mm and 35mm
• Maximum dimensions: 12.2” x 10’ x 40’
Over 200
Cross Laminated timber
projects built in the US and
Canada
Meets Standards:ANSI/APA PRG 320State of Oregon BCD 15-01AWC NDS-2015
2015 IBC & NBC-084-2015ICC ESR March 2016
Structural Strength & Stability
Structural Benefits
•Lower material weight at comparable
strength (6 times lighter than concrete).
•Seismic performance.
•Panels span in both directions.
•Dimensional stability with minimal shrinkage
in building height.
•Versatility and ability to integrate with other
materials.
•Minimal site waste
Environmental Benefits
Negative carbon footprint
Environmental - Carbon Sequestration
A typical 2,400 square
foot wood-frame
residence holds 28.5
tons of carbon dioxide,
roughly equal to
removing a small car
from the roads for
seven years.
Structurlam is a pioneer in linking 3D
modeling to CNC machinery
Mass Timber Construction as a
Customized Kit of Materials
In the past, conventional wood construction consisted of ordering lifts of lumber and bundles of glulam to be framed on-site.
With today’s mass timber construction, the column grid is designed to optimize a timber structure, and every stair opening and doorframe is considered early in the design process well ahead of construction start.
Now, with 3D modeling and CNC framing, every beam, column and panel is custom-designed, produced and CNC framed for a specific location in the structure.
3D Model & CNC Framing
3D Model
Resolve conflicts in the Architectural
and Structural 3D models
Lakeshore Instal lation
CLT Manufacturing
CNC Technology
Shipped to site
FP Innovations US CLT Handbook
www.masstimber.com
CrossLam Design Guide
Typical Panel Connectors
Panel Joint Connection
Panel to Panel Connection
Earth Systems Science Building, UBC
UBC Earth System Science Building
UBC Earth System Science
Building
Roof and floor panel
installation
Elkford Community Center
Wall panels
Schedule – Rapid Assembly
Elkford Community Centre
Elkford Community Centre
Shoreline Medical ClinicShoreline, WA
Crosslam SLT3 panels attached to wide
flange steel beams with screws through the
top flange from below……
The first of three truckloads of panels went
up in 3 hours, 5,000 sq ft.
Shoreline Medical ClinicShoreline, WA
Washington State University
Pullman, WA
Washington State University
Clean Technology Lab
Stanford Energy Center
Cooley Landing Education Center
Rocky Mountain Institute
ZGF Architects
Rocky Mountain Institute
Wood Innovation and Design CentreWood Innovation and
Design Centre (WIDC) Prince George, British Columbia,
Canada
Wood Innovation & Design Center
Wood Innovation & Design Center
Up Next 18 Stories
UBC Brock Commons
Kris Spickler | Heavy Timber SpecialistHeavy Timber Group - Structurlam Products LP
4120 Douglas Blvd. #306-502 | Granite Bay, CA 95746
Office: (916) 797-5588 | Mobile: (916) 759-9320
Email address: [email protected]
website: www.structurlam.com
CrossLamTM by Structurlam