Cross Podinate Add Borders Everything but the Quilt · New 2 Pod Layout + Borders using Binding Strips. Four Square Remix with 2 Four Square Pods

All the Podsabilities!GrowCross Podinate

Add BordersEverything but the

Quilt

2 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved

Irish Chain QuiltIncludes precut patchwork and binding fabric. Finished unit 6"

1 Pods®

29" x 39"2 Pods®

42" x 48"3 Pods®

54" x 66"5 Pods®

72" x 84"

Ready to sew, designed to grow! Pre-cut patchwork and binding strips beautifully packaged with instructions.

Designed to grow!

Four Square QuiltIncludes precut patchwork and binding fabric. Finished block 12"

1 Pods®

36" x 48"2 Pods®

48" x 72"3 Pods®

72" x 72"4 Pods®

72" x 96"

Corner Cabin QuiltIncludes precut patchwork and binding fabric. Finished block 12"

1 Pods®

36" x 48"2 Pods®

48" x 72"3 Pods®

72" x 72"4 Pods®

72" x 96"

3

POD-MAS06-WYMC30" X 42"

IRISH CHAIN QUILT


FOUR SQUARE QUILT


CORNER CABIN QUILT

All The Podsabilities!Double Irish Chain with two Irish Chain Pods®

P 4-5

Four Square RemixNew layout with double borders

P 6-7

Everything but the Quiltaccessories made with one Corner Cabin Pods®

P 8-9

2 Pod Cross PodinateIrish Chain and Four Square Pods®

P 10-13

3 Pod Cross PodinateIrish Chain, Four Square, and Corner Cabin Pods®

P 14-19

Bonus PillowsWith left over pieces from the 3 Pod Cross Podinate

P 20-23


Grow aDouble Irish Chain with two Irish Chain Pods®

finished size40" x 50"

There is some cutting required to make the Double Irish Chain Quilt.No Additional fabric is required to make the top.

Double

Irish C

hain

5Sew Many Podsabilities © 2019 Maywood Studio all rights reserved

3. Sew a (A-H) square to either side of step 1 strip. Make 20.

4. Sew the step 3 unit to the top and bottom of the step 2 units. Make 10.

4. For each block select (13) I squares and (12) A-H squares.

5. Sew together in rows as illustrated to make a (5) alternating rows. Press to nest seams. Sew row to row. Make 10.

Make the following blocks using the precut pieces from your Irish Chain Pods® kits.

Follow the instructions below to make the double Irish Chain blocks.Blocks are 10-1/2" square (10" square finished.) There will be leftover pieces.

Lay the quilt top out as illustrated on the opposite page.

1. Cut (2) 2-1/2" x 6-1/2" pieces from (10) J pieces for a total of (40) strips.

2-1/2"

JJ

2-1/2"

2. Sew a step 1 strip to either side of a J piece. Make 10.


New 2 Pod Layout + Borders using Binding StripsFour Square Remix with 2 Four Square Pods®

finished size60" x 72

Additional Supplies:Outer Borders:

Option 1: 7/8 yard (non-directional): cut (7) 4-1/2" x WOF stripsOption 2: 1-3/8 yards (directional): cut (4) 4-1/2" x WOF strips, cut (4) 4-1/2" x LOF strips

Binding1/2 yard: cut (7) 2-1/2" x WOF strips

Four Square

Remix

+ Bord

ers


Make the following blocks using the precut pieces from your Four Square Pods® kits.This is a different layout than in the original instructions. There will be leftover pieces.

The inner border is made with the precut binding strips from the Pods® kits. You will need 7 pieces.The outer border and binding require additional supplies.

Top Assembly Diagram

Make 8 12-1/2" square 6-1/2" x 12-1/2" 6-1/2" x 12-1/2" 12-1/2" square

Make 2 Make 2 Make 6 Make 7

J J

JJI I

I I

Use 'I' and 'J' pieces Use A/B/C/D/E/F/G/H pieces


H2

G2 G2

BindingBindingBinding

Binding

Let's get creative!Everything but the Quilt with one Corner Cabin Pods® Kit

Book Coversome cutting required

Pillowinstructions on p.21

Optional: add binding 'flower' withbutton in center

additional supplies:18" pillow form

3/4 yard backing22" x 22" piece of batting and muslin

Top: (1) H2Bottom: (2) A squares

Sides: (2) G2bookmark: (2) B1

Top: (1) H2Bottom: (3) 12-1/2" pieces cut from a binding strip

Sides: (2) C2Binding: (2) 10-1/2" pieces cut from a binding strip

1 Corn

er Cabin

Pods®

H2

G2EF1 B2 C2G1

F2 B1

C1G2

AG2

A

B1

A


Zip PouchTop: (2) D2

Main: (2) H2Bottom: (1) H1

Bucket Top: (4) D2 (*2 for interior lining)

Main: (2 ea.) F2, G2, B2, C2Bottom: (1) H1

BasketTop: (2) B1, (2) C2 Main: (2) A squares, (2) D1, (2) H1Bottom: (2) D1Handles: (2) D1

additional supplies:(2) 9-1/2" pieces of 2" webbing(2) 11-1/2" x 15-1/2" lining pieces, batting, fusible interfacing

Pursesome cutting required

Top: (2) H2 Middle: (2) F1 Main: (4) E squaresBottom: (2) G2Handles: (1) binding piece, cut in to 2 equal pieces

additional supplies:(2) 12-1/2" x 12-1/2" lining pieces, batting, lining

additional supplies:12" zipper

12-1/2" x 15-1/2" lining, battingadditional supplies:

12-1/2" x 24" lining, batting, fusible interfacing

E

B1

A

C2

D1

D1

D1

D1

H1

H1 H1H2 H2D2 D2 D2

G2C2

F2 B2

D2

F1

H2

G2

F1

E

Binding

10#maywoodpods

#madewithmaywood

Two Pod Combo: Irish Chain + Four Square Pods®, 48" x 60" Finished

Irish C

hain

Four Square


1. Follow steps 1-6 in the Irish Chain Pod Instructions to make 18 - Nine Patch blocks.

2. Sew 16 - Nine Patch units to 16 - 'J' squares. Press. Reserve 2 - Nine Patch units for the top and bottom rows of the quilt top.

3. Sew the Nine Patch-Fabric J pairs together to make the Irish Chain Block. Press. Make 8.

12½" x 12½"Make 8

Irish Chain Block

J

J

Irish ChainNine Patch

6½" squareMake 16

12½" x 12½"Make 8

Four Square Block BFour SquareHalf Square Triangle

6½" squareMake 24

Four SquareFour Patch

6½" squareMake 22

2 Pod Cross Pod-inationInstructions for combining the Irish Chain & Four Square Pods into a finished quilt.

Finished size 48" x 60"Backing Needed: 3 yards

For best results, read the pattern completely first.Sew with ¼" seam allowances. Press in the direction of arrows.

4. Follow step 1 in the Four Square Pod Instructions to make 24 - Half Square Triangle units. Reserve 8 for the top and bottom rows of the quilt top.

5. Follow steps 2-3 in the Four Square Pod Instructions to make 22 - Four Patch units. Reserve 6 for the top and bottom rows of the quilt top.

6. Follow steps 6-7 in the Four Square Instructions to make Block B. Press. Make 8.

From 1 Four Square Pod gather:88 - A-H squares(there will be 8 pieces left)

all I and J piecesBinding StripsInstructions

From 1 Irish Chain Pod, gather:all A-H squares

all 'I' squares16 - J Squares (there will be 1 piece left)

Binding StripsInstructions


2 Pod Cross Pod-ination Top Assembly Diagram7. Assemble the rows in the order illustrated. The top and bottom rows are made from the remaining Nine Patch, Half Square Triangles, and Four Patch units.

9. Layer quilt top, right side up, batting and backing wrong side up. Baste together using your favorite method. Quilt as desired. Trim excess batting and backing.

10. Join the 2½" binding strips from both Pods together, end to end, to create one continuous piece. Press in half lengthwise to make a double-fold binding. Sew to the front of the quilt with a ⅜" seam allowance, then turn the binding to the back side and stitch by hand with matching thread.

Top Row

Row 1

Row 2

Row 3

Row 4

Bottom Row

Share your projects on Social Media#maywoodpods #madewithmaywood


Assembly Diagram: Two Pod ComboCombination shown with Irish Chain and Four Square Pods®

14 Sew Many Podsabilities © 2019 Maywood Studio all rights reserved 14#maywoodpods

#madewithmaywood

Irish C

hain

Four Square

Corner C

abin

Three Pod Combo: Irish Chain + Four Square + Corner Cabin Pods®, 60" x 60" Finished


3 Pod Cross Pod-inationInstructions for combining the Irish Chain, Four Square, & Corner Cabin Pods into a finished quilt.

Finished size 60" x 60"Backing Needed: 3½ yards

For best results, read the pattern completely first.Sew with ¼" seam allowances. Press in the direction of arrows.

From 1 Four Square Pod gather:80 - A-H squares(there will be 16 pieces left)

all I and J piecesBinding StripsInstructions

From 1 Irish Chain Pod, gather:80 A-H squares (there will be 10 pieces left)

64 'I' squares (there will be 8 pieces left)8 - J Squares (there will be 9 pieces left)

Binding StripsInstructions

From 1 Corner Cabin Pod, gather:Block A: 4 pieces each of E, F1, F2, G1, G2, H1, H2

(there will be 2 of each piece left over)Block B: 2 pieces each of A, B1, B2, C1, C2, D1, D2

(there will be 4 of each piece left over)Binding StripsInstructions

1. Follow steps 1-6 in the Irish Chain Pod Instructions to make 16 - Nine Patch units.

2. Follow step 1 in the Four Square Pod Instructions to make 24 - Half Square Triangle units.

3. Follow steps 2-3 in the Four Square Pod Instructions to make 20 - Four Patch units.

4. Follow steps 2-4 in the Block A in the Corner Cabin Pod instructions to make 4 - A Blocks.

5. Follow steps 6-8 in the Corner Cabin Pod instructions to make 2 - B Blocks.

12½" x 12½"Make 4

Corner CabinBlock B

12½" x 12½"Make 4

Corner CabinBlock A

Irish ChainNine Patch

6½" squareMake 16

Four SquareHalf Square Triangle

6½" squareMake 24

Four SquareFour Patch

6½" squareMake 20


6. Make the Center Block. Layout the 4- Corner Cabin B Blocks as illustrated (fig. 1). Sew together in pairs (fig 2). Press. Join the pairs together. Press. Square up to 24" x 24".

7. Follow steps 6-7 in the Four Square Pod Instructions to make Block B. Make 8.

8. Lay out 2 - Four Square B blocks as illustrated (Fig 3). Sew together. Press. Make 4.

12½" x 12½"Make 8

Four SquareBlock B

Corner Cabin B Blocks

Four Square Pod steps 6-7

Fig 1 Fig 2Center Block, 24" x 24"

Four Square B Blocks

Fig 3 Make 4, 24½" x 24½"


Make 2, 24½" x 48½"

Make 2, 6½" x 48½"

Make 2, 6½" x 60½"

Corner Cabin Block A Corner Cabin Block AStep 8 Unit

24½" x 48½"

11. Assemble the side borders. Make 2.

12. Assemble the top and bottom borders. Make 2.

10. Sew a Corner Cabin A Block to either side of a Step 8 unit. Press. Make 2.

9. Sew 2 of the Step 8 units to either side of the center block. Press.


3 Pod Cross Pod-ination Top Assembly Diagram

Share your projects on Social Media#maywoodpods #madewithmaywood

13. Follow the Quilt Assembly Diagram to finish your quilt top. Sew a step 10 unit to the top and bottom of the Step 9 center unit. Press. Attach the side borders. Press. Attach the top and bottom borders. Press.

14. Layer quilt top, right side up, batting and backing, wrong side up. Baste together using your favorite method. Quilt as desired. Trim excess batting and backing. Finished size is 60" x 60" square.

15. Join the 2½" binding strips from all three Pods together, end to end, to create one continuous piece. Press in half lengthwise to make a double-fold binding. Sew to the front of the quilt with a ⅜" seam allowance, then turn the binding to the back side and stitch by hand with matching thread.


Assembly Diagram: Three Pod ComboCombination shown with Irish Chain, Four Square, and Corner Cabin Pods®


3 Pod Combo: Bonus Pillow Patterns from left-over pieces.Finished size 18" x 18"

Additional Supplies for Each Pillow (not included with the Pods)Pillow Back: 3/4 yard fabric

Backing: 1 piece 22" x 22" fabricBatting: 1 piece of 22" x 22" batting

18" Pillow Form

Corner Cabin PillowFour Square Corner PillowIrish Chain Pillow

These pillow tops are made with the left-over Pods pieces when you make the 3 Pod Cross-podination quilt with the Irish Chain, Four Square, and Corner Cabin Pods. You can make ALL THREE with what is left!

From the Four Square Pod left-overs gather:

16 - A-H squares

From the Corner Cabin Pod left-overs, gather:

2 - H1 strips 1 - H2 strip2 - D1 strips1 - D2 strip

From the Irish Chain Pod left-overs, gather:

10 A-H squares8 -'I' squares 9 - J Squares

From the Corner Cabin Pod left-overs, gather:

Block A: 2 pieces each E, F1, F2, G1, G2, H1

Block B: 2 pieces each A, B1, B2, C1, C2, D1


Irish Chain Pillow

1. Sew 3 - J Squares together into a strip. Press. Make 3.

2. Sew 4 -'I' squares and 5 - 'A-H' squares in an alternating pattern. Press. Make 2

3. Join the Step 1 strips to the Step 2 strips as illustrated (Fig 1). Press. Trim to 18½" square.

4. Layer pillow top, right side up, over the batting and backing, wrong side up. Baste together and quilt as desired. Trim excess batting and backing to 18½" x 18½" square.

5. Follow the instructions for the Double-Fold Envelope Back Pillow Back on Page 11.

1. Follow steps 2-3 for Block A in the Corner Cabin Pod instructions to make 2 - A Blocks .

2. Follow steps 6-7 for Block B in the Corner Cabin Pod instructions to make 2 - B Blocks.

3. Sew the A Blocks to the B Blocks, making sure to lay them out as illustrated (Fig 1). Press.

4. Join the A-B Block sets together (Fig. 2).


7. Follow the instructions for the Double-Fold Envelope Back Pillow Back on the last page.

Fig. 1 Trim to 18½" square

Corner Cabin Pillow

Fig. 1Fig. 2


1. Follow steps 2-3 in the Four Square Pod Instructions to make 4 - Four Patch units (Fig. 1).

2. Sew the Four Patch units into pairs (Fig. 2).

3. Sew a Corner Cabin D2 Strip to the top of a Step 2 Unit. Sew a Corner Cabin H2 strip to the bottom of a Step 2 unit. (Fig 4.)

Four Square Corner Pillow

4. Sew a Corner Cabin D1 Strip to the left sides of the Step 3 units (Fig. 4). Sew a Corner Cabin H1 strip to to the right sides of the Step 3 units (Fig 5.)

5. Sew the Step 4 units together.


7. Follow the instructions for the Double-Fold Envelope Back Pillow Back on the last page.

Fig. 1

Fig. 4 Fig. 5

Fig. 2Fig. 3


1. Cut 2 rectangles 18½" x 27" of the pillow back fabric of your choice. Fold each piece in half, wrong sides togethermatching the short ends. Top stich 1/2" in from the edge of the fold. Press.

2. Layer the pillow back pieces over the quilted pillow top, right side together. Overlap the pieces to match your 18½" x 18½" pillow top. Pin in place. *Note, the pillow backs are double layers, so both sides are right sides!

3. Stitch with a ½" seam allowance alll the way around the pillow back. No need to leave an opening! Clip the corners and turn the right-sides out through the overlapped pillow back pieces. Insert your pillow form and enjoy!

Double-Fold Envelope Pillow Back Instructions

See all the Maywood Studio Pods®

online and in our Marketplace catalog.

maywoodstudio.com

Documents

Cross Podinate Add Borders Everything but the Quilt · New 2 Pod Layout + Borders using Binding Strips. Four Square Remix with 2 Four Square Pods