Proof of performance

CRITICAL INFRASTRUCTURE PROMOTION

Until August 31st, order with these promo codes to receive FREE accessories.

2% of the revenue will go to the WHO Solidarity Response Fund.

VDV II ProWith FREE numbered remotes (158050)

SAVE$94

Promo Code: R158003PROMO

NaviTEK NT ProWith FREE numbered remotes (150050)

SAVE$386

Promo Code: R151006PROMO

SignalTEK NTWith FREE PoE Pro Tester (R158004)

SAVE$595

Promo Code: R156005PROMO

LanXPLORER ProWith FREE PoE Pro Tester (R158004)

SAVE$595

Promo Code: R150001PROMO

For more information please call 973-957-7700 or visit www.idealnetworks.net

© 2020 IDEAL INDUSTRIES NETWORKS LIMITED. All Rights Reserved. IDEAL Networks, SignalTEK, NaviTEK and LanXPLORER are trademarks or registered trademarks of IDEAL INDUSTRIES NETWORKS LIMITED.

Promotion Code Description RRP Promo Price

TRADE156006 SignalTEK CT TRADE-IN - Data Cable Transmission Tester $ 1,654 $ 1,429

TRADE156005 SignalTEK NT TRADE-IN - Data Cable Transmission Tester $ 2,481 $ 2,256

This promotion is valid between May 1st to August 31st 2020 and cannot be used in conjunction with other offers. Terms and conditions apply. SignalTEK trade-in is valid with all wiremappers. The wiremapper must be returned to IDEAL Networks / distribution partner and the serial number provided at time of purchase. Please

quote the trade-in code when purchasing.

Or trade-in ANY wiremapper for a new SignalTEK CT or SignalTEK NT

NaviTEK IEWith FREE Media Converter and GbE Fibre Kit (R151060 and MGKLX2)

SAVE$455

Promo Code: R151010PROMO

SAVE$225

Proof of performance

For more information please call 973-957-7700or visit www.idealnetworks.net

© 2020 IDEAL INDUSTRIES NETWORKS LIMITED. All Rights Reserved. IDEAL Networks, SignalTEK, NaviTEK and LanXPLORER are trademarks or registered trademarks of IDEAL INDUSTRIES NETWORKS LIMITED.

VDV II ProMore than just a wiremapper

• Pinpoint cable faults on copper cabling• Interfaces for Coax, RJ11/12 and RJ45• Distance to fault using TDR• Cable length measurement • Trace cables with compatible amplifier probe• PoE detection with voltage

FREE GIFTNumbered remotes

Use the 12 wiremap remotes to save time and indicate a pass/fail on both ends of the cabling.

SignalTEK NTMore than a qualifier

• Pinpoint cable faults on copper and fibre cabling• Prove performance of the network to

international standards• Simulate network traffic with CCTV, IPTV, VoIP

and web traffic• Network troubleshooting to identify

configuration errors

FREE GIFTPoE Pro Tester

Use the PoE Pro to pinpoint cable faults on copper cabling and discover the maximum power available. With interfaces for Coax, RJ11/12 and RJ45, the PoE Pro will provide PoE pass/fail to IEEE 802.3af/at/bt, testing up to 90W.

NaviTEK NT ProEliminate Network Downtime

• Advanced wiremap using TDR• PoE detection with voltage• VLAN detection and support• Optical power level with pass/fail indication• Port identification using EDP/CDP/LLDP• Create Professional PDF reports for your clients

FREE GIFTNumbered remotes

Use the 12 wiremap remotes to save time and indicate a pass/fail on both ends of the cabling.

NaviTEK IEEliminate Network Downtime

• Pinpoint cable faults on copper and fibre cabling • Easily configure nodes to resolve connectivity

issues • Prevent network failures with the health check

feature • Locate devices using the device blink feature

FREE GIFTMedia converter and GbE fibre kit

The media converter allows a fibre connection at 100Mbps as well as the 1Gbps that the NaviTEK IE fibre port already has. The fibre Gbe kit includes fibre patch cords and an SFP module to connect to a fibre network.

LanXPLORER ProEliminate Network Downtime

• Pinpoint cable faults on copper and fibre cabling• Troubleshoot VOIP devices with QoS and Jitter• Monitor traffic between two devices using in-line

mode• Troubleshoot Wi-Fi with dBm, SNR and other

tools• PoE/PoE+ verification with voltage

FREE GIFTPoE Pro Tester

Use the PoE Pro to pinpoint cable faults on copper cabling and discover the maximum power available. With interfaces for Coax, RJ11/12 and RJ45, the PoE Pro will provide PoE pass/fail to IEEE 802.3af/at/bt, testing up to 90W.

Easy to use data cable testers that check the integrity of copper cables in voice, data and video applications.

www.idealnetworks.net

VDV II SeriesMore than just a wiremapper

DESIGNED FOR:Data cable installers and IT Network Technicians

KEY FEATURES:

• Coax, RJ11/12 and RJ45 interfaces

• Wiremap for miswires, split pairs, shorts and opens

• Cable tracing with compatible probe

• VDV II Plus – all the features of VDV II as well as:

• Larger backlit 2.9” display

• Port blink to visually trace cables

• Cable length

• Distance to open

• Carry case & cables

• VDV II Pro – all the features of the VDV II Plus as well as:

• Distance to open / short (TDR)

• PoE detection with voltage information

• Media service detection

• Ethernet detection with network rate

• Pinpoint cable faults on copper cabling• Interfaces for Coax, RJ11/12 and RJ45• Distance to fault using TDR• Cable length measurement• PoE detection with voltage• Trace cables with compatible amplifier probe

What does the VDV II Pro do?

Wiremap with troubleshooting information

PoE detection with voltage information

Wiremap test (TDR) with length and pass/fail

Display switch speed and duplex information

Digital and analogue tone for cable tracing

PBX Service detection

Prove network performance

Network summary information

Wiremap test (TDR)

Wiremap fault analysis

Simulate actual network traffic

Ping and traceroute

Prove the performance of your cabling and networks by simulating actual network traffic to Gigabit Ethernet standards.

Proof of Performance

SignalTEK NTMore than a qualifier

DESIGNED FOR:Data cable installers and IT Network Technicians

KEY FEATURES:

• RJ45 and fibre interfaces

• Network performance test to IEEE802.3ab

• Wiremap for open, shorts, miswires and split pairs (TDR)

• Simulate load - CCTV/IPTV/VoIP/Web

• PoE/PoE+ verification

• Check switch speed 10/100/1000 Mb/s

• Verify network configuration

• Switch port identification via LLDP/CDP

• Cable tracing with compatible probe

• Optical power indication

• Port blink to visually trace cables

• Identify network connection problems

• Ping local network devices and Internet URL’s

• Generate PDF reports to prove performance

• Send reports with the free IDEAL AnyWARE app

• Pinpoint cable faults on copper and fibre cabling• Prove performance of the network to IEEE standards• Simulate network traffic with CCTV, IPTV, VoIP and web • Network troubleshooting to identify configuration errors• PoE/PoE+ verification with voltage• Create Professional PDF reports for your clients• Send reports anywhere using the IDEAL AnyWARE app

What does the SignalTEK NT do?

VLAN detection & operation

CDP/LLDP/EDP port information

Port & network summary info

Fibre cabling – pass/fail indication

RJ45 wiremap with distance to fault

Real time broadcast network traffic

Replace your cumbersome laptop with an all-in-one cable and network tester that keeps your network running.

Traditional Troubleshootingwith a Laptop

Troubleshooting using aNaviTEK NT Pro

Long login time and boot upAwkward in tight spacesNo RJ45 cable testNo fibre SFP portNo PoE testNo reporting

No login for faster operationEasy to carry with rugged casingRJ45 wiremap with pass/failFibre testing with pass/fail (SM/MM)PoE/PoE+ detectionPDF generation

www.idealnetworks.net

NaviTEK NT ProEliminate network downtime

DESIGNED FOR:IT Managers and Systems Integrators

KEY FEATURES:

• Advanced wiremap for split pairs, opens and shorts (TDR)

• PoE/PoE+ detection

• Tone generator for cable tracing

• Hub blink for port identification

• Switch speed detection - 10/100/1000 Mb/s

• Touchscreen

• Detailed network information

• Port identification using EDP/CDP/LLDP

• VLAN detection and support

• Traffic utilisation bar graph

• Optical power level with pass/fail indication

• Generate test reports (PDF or CSV)

• IDEAL AnyWARE mobile app

• Use the Active Remotes to save time and indicate a pas/fail on both ends of the cabling

Health check to identify issues

Configure network nodes

M12 and RJ45 cable testing

Configure network nodes

Event log – find intermittent issues

Display node details quickly

The only all-in-one Profinet cable and network tester that prevents downtime in Industrial Ethernet networks.

Proof of Performance

NaviTEK IEEliminate network downtime

DESIGNED FOR:Industrial Ethernet IT Managers and Systems Integrators

KEY FEATURES:

• All the features of the NaviTEK NT Pro

• M12 PROFINET Cable Testing

• PROFINET Fibre Cable Testing

• Traffic light network health check

• Device LED flash to locate devices

• NETMAP compare – identify changes

• Configure node settings

• List all network node details

• Reset devices to factory defaults

• Device alarm/error detection

• Industrial Ethernet PDF Reports

• Create professional PDF reports for your clients

• Send reports anywhere using the free IDEAL AnyWARE app

• Pinpoint cable faults on copper and fibre cabling • Easily configure nodes to resolve connectivity issues • Prevent network failures with the health check feature • Locate devices using the device blink feature • Find mis-configured devices using the comparison tool • Find rogue devices using the 48 hour event log• Send reports anywhere using the IDEAL AnyWARE app

What does the NaviTEK IE do?IE

Wi-Fi – resolve Wi-Fi network issues faster

VoIP – monitor data between the phone and network

Cable – wiremap test for open, shorts, miswires and

split pairs

Troubleshooting – monitor network traffic between

two devices

The all-in-one RJ45, fibre and Wi-Fi network tester that prevents network downtime.

www.idealnetworks.net

LanXPLORER ProNetwork Troubleshooter with Bandwidth Monitoring and Performance Diagnostics

DESIGNED FOR:IT Managers and Systems Integrators

LanXPLORER Test ReportJob Name: MyJob

Date Tested: February 9 2016Time Tested: 11:03

Info 1 : Info 2: Info 3: Info 4: Info 5: Info 6: Info 7: Info 8:

Owner: testerCompany: fgAddress 1 : cvAddress 2: vb

City: hkState: tai

Zip: 45tu7Country: rt

Phone #1 : 12356Phone #2: 67890

FAILtest001 0

ESN: 001606-880002

Setup ResultsPortLine RateDuplexIPv4IPv6

Auto RJ45Auto 1000 Mb/sAuto Full DuplexDHCP Assigned 172.20.254.2Disabled

Detected VLAN IDs-

PoE54V

Setup ResultsPoELoad

Pair 1 2-36 Pair 45-78PoEType

Min. Pwr(W) Voltage

(V)Current(mA)

Power(W)

Voltage(V)

Current(mA)

Power(W)PoE 5

54 285 15 0 0 0Ping Destination

AddressPause(ms)

Length(Bytes)

Tx(Frames)

Rx(Frames)

Min RTT(ms)

Avg RTT(ms)

Max RTT(ms)

IPv4 www.google.com 1000 64 0 0 0 0 0www.bbc.com 0 0 0 0 0www.yahoo.com 0 0 0 0 0www.youtube.com 0 0 0 0 0

Netmap ScanAddress

ScanRange

IPv6 HostsFound

172.20.254.2 Class C /24 Enabled 3MAC Address IP Address Name Services00:04:5A:CE:6F:2B The Linksys Group172.020.254.001 http00:16:06:88:13:1E Ideal Industriesfe80::216:6�:fe88:131e -4C:9E:FF:F4:78:7A -fe80::4e9e:��:fef4:787a http

NetVerify

Map HostsFound

testnet 3

Hosts FoundUnchanged Changed New Missing3 0 0 0

MAC Address IP Address Name Services00:04:5A:CE:6F:2B The Linksys Group172.020.254.001 http00:16:06:88:13:1E Ideal Industriesfe80::216:6�:fe88:131e -4C:9E:FF:F4:78:7A -fe80::4e9e:��:fef4:787a http

Conflicts ScanAddress

ScanRange

ConflictsFound0

172.20.254.2 Class C/24

Created: February 10 2016 08:37 Page 12 of 19

KEY FEATURES:

• Monitor PoE power consumption in-line

• List all networks devices

• Identity changes on the network

• VoIP QoS and signal testing (in-line)

• Wi-Fi site survey @2.4/5GHz

• Top 10 bandwidth talkers and listeners

• Discover IP address conflicts

• Traffic statistics - network and devices

• Pinpoint cable faults on copper and fibre cabling• Troubleshoot VOIP devices with QoS and Jitter• Monitor traffic between two devices using in-line mode• Troubleshoot Wi-Fi with dBm, SNR and other tools• PoE/PoE+ verification with voltage• Create Professional PDF reports for your clients• Send reports anywhere using the IDEAL AnyWARE app

What does the LanXPLORER Pro do?

Eliminate guesswork when installing, maintaining and troubleshooting networks where PoE is deployed.

Proof of Performance

PoE ProVerify data cabling and Power over Ethernet

DESIGNED FOR:Anyone installing or maintaining PoE devices and networks

KEY FEATURES:

• All the features of the VDV II Pro

• Validate PoE/PoE+/PoE++ for your device & network

• Supports 802.3bt High Power PoE (up to 90 watts)

• Compatible with most non-standard PoE injectors

• Identifies PSE Type (af/at/bt)

• Identifies PSE Class – 0 to 8

• Determines maximum power available (watts)

• Displays voltage

• Displays which pairs have PoE

• Detects network switch speed up to 1G

• Pinpoint cable faults on copper cabling• Interfaces for Coax, RJ11/12 and RJ45• Provide PoE pass/fail to IEEE 802.3af/at/bt• High power PoE testing up to 90W• Discover the Maximum power available• Detects network switch speed up to 1G

What does the PoE Pro do?

Wiremap test (TDR) with length and pass/fail

Display switch speed up to 1G and duplex information

Type(af/at/bt)

Pin and Polarity

PSE Class

Pass/Fail

PoE Detected

Maximum Power Available (Voltage displayed while test is in progress)

Number of pairs supplying PoE (2Pr or 4Pr)

www.idealnetworks.net

DATA CABLE TESTING NETWORK TESTING INDUSTRIAL

ETHERNET

PoE Pro VDV II SignalTEK NT NaviTEK NT LanXPLORER

Pro NaviTEK IE

By

feat

ures

req

uire

d(C

op

per

cab

le/L

AN

net

wo

rk)

Wiremap testing o o o o o o

Determine distance to fault o Pro o o o o

Tonegenerator o o o o o o

CDP/LLDP/EDP decoding o Plus & Pro o o

Hub blink o Plus & Pro o o o o

Determine cable length o Plus & Pro o o o o

Ping and traceroute test o o o o

PoE service detection o Pro o o o o

PoE load test (up to 90W) o o Plus & Pro o o

Service detection PBX and ISDN o Pro o o o o

Ethernet transmission testing - cable o

Ethernet transmission testing - network o

VoIP diagnostics o

QoS monitoring o

Advanced network troubleshooting o

Network auditing/mapping of IP devices o

PROFINET testing/ troubleshooting o

By

feat

ures

re

qui

red

(F

ibre

cab

le/

LAN

net

wo

rk) PROFINET testing/

troubleshooting o

CDP/LLDP/EDP decoding o Pro o o

Hub blink o Pro o o

Ping and traceroute test o Pro o o

By

feat

ures

req

uire

d

(Tel

eco

m/W

AN

N

etw

ork

)

RFC2544 test, jitter, delay, latency, frame loss, throughput test

Y.1564, NetSAM test

SLA, SLA-Tick & BERT test, traffic generation

Loop back Pro o o

Rep

ort

img PDF Reporting o Plus & Pro o o

IDEAL AnyWARE Cloud / Desktop

IDEAL AnyWARE Mobile App o Plus & Pro o o

SELECTION GUIDE