Crimping · 2020. 6. 3. · Crimping D D.5 Overview contacts – tools Crimp contact Crimp type Description Conductor crosssection AWG Crimping tool Order No. page in mm2 tool coaxial

Cri

mp

ing

D

D.1

Contents

Crimping

Crimping

Introduction D.2

Overview contacts – tools D.4

Crimping tools for wire end ferrules D.6

Introduction – Crimping tools for other contacts D.12

Crimping tools for other contacts D.14

Pressing tools D.24

Crimping tools for connectors D.26

Crimping inserts D.27

Insertion tool for twisted-pair cables D.29

Other crimping tools D.30

Disconnect D.31

Tools for polymer optical fibre (POF) D.32

Cable tie tools D.33

Cri

mp

ing

D

D.2

The conductor insulation must be pushed into the plastic collar. The ferrule sleeve must be completely filled by the conductor. Depending on the cross-section, the conductor should protrude approx. 0 … 0.5 mm from the ferrule sleeve.

Introduction

After stripping, appropriate contacts or wire end ferrules can be crimped to the cable end.Crimping produces a reliable connection between conductor and contact, and has more or less completely replaced soldering.Crimping describes the production of a uniform, nondetachable connection between conductor and connecting element. This should be achieved exclusively by the use of a high-quality precision tool. The result is a safe, reliable connection in both electrical and mechanical terms.

Weidmüller offers a wide product range of mechanical crimping tools.An integral ratchet mechanism with disengaging option guarantees optimum processing quality. Crimp connections produced with Weidmüller tools comply with international standards and specifications.

Crimping of wire end ferrule: Optimum crimp of different cross-sections as an example

Examples for the visual inspection of a crimp connection with manual and automatic crimping tools by Weidmüller:

Crimping

0.5 mm2 0.75 mm2 1.0 mm2 1.5 mm2

2.5 mm2 4.0 mm2 For cross-sections 6…50 mm2, the crimping shape is approximately the same.

Front view:

Cut-away view: 0 … 0.5

Cri

mp

ing

D

D.3

Faults which can occur during crimping:

• Cracksalongthesidesanddieimpressions• Splittingoftheferrules• Asymmetricalcrimpingshape• Extremeburrsformedalongthesides• Ferrulenotfilledbytheconductor• Singleconductorspushedbackprotrudingfromthecollar• Singleconductorssqueezedoff• Plasticcollardamagedbythecrimpingjaw• Conductorinsulationnotpushedintotheplasticcollar• Ferrulebentlongitudinallyaftercrimping

Note: The ferrule must not split open after it has been connected once in any Weidmüller terminal corresponding to the con ductor cross-section (with a torque according to IEC 60947-1)

Introduction

Faulty crimping connections due to incorrect combination of cable and wire end ferrule

It is not possible for a tool to function reliably with every combi-nation of conductor and crimping material.It is possible that the standard requirements for the crimped productcan’tbeachieved,althoughtakenontheirown,bothconductor and crimping material comply with the correspon ding standard. The individual production tolerances of conductor and crimping material do not allow every conductor to be combined with every contact.

The combination of conductors, crimping material and crimping tool must be coordinated: this procedure is all the more difficult giventhelargenumberofproductsonthemarket.This means that the material must be defined and the crimping result tested, ensuring that the test, and later on the tool, satisfy the same conditions.

Asymmetrical crimping shape Burr formation on one side

Asymmetrical crimping shape Burr formation on one side

Formationofcracksattheimpressionsofthecrimpingjaw

Formationofcracksatthesides.Sidessplitopen

Single conductor squeezed off

Single conductor pushed back

Cri

mp

ing

D

D.4

Overview contacts – tools

Crimp contact Crimp type Description Conductor crosssection AWG Crimping tool Order No. pagein mm2 tool

Wir

e en

d f

erru

les

with plastic collar 0.5…2.5 20…14 StripaxPlus2.5 9020000000 D.6

with / without plastic collar 0.14…6 26…10 PZ 6 roto 9014350000 D.9

0.25…1.5 24…16 PZ 1.5 9005990000 D.7

0.5…4 20…12 PZ 4 9012500000 D.8

with / without plastic collar 0.14…6 24…10 PZ 6 HEX 9013650000 D.7

with / without plastic collar 0.25…6 24…10 PZ 6/5 9011460000 D.8

with / without plastic collar 0.5…6 20…10 PZ 3 0567300000 D.9

with / without plastic collar 6…16 10…6 PZ 16 9012600000 D.10

25…50 3…1 PZ 50 9006450000 D.11

Twin

wire

end

ferr

ules

Twin wire end ferrules 0.5…1 20…17 PZ 1.5 9005990000 D.7

0.5…4 20…12 PZ 6 HEX 9013650000 D.7

0.5…2,5 20…14 PZ 4 9012500000 D.8

0.5…4 20…12 PZ 6/5 9011460000 D.8

0.5…4 20…12 PZ 3 0567300000 D.9

0.5…4 20…12 PZ 6 roto 9014350000 D.9

6…16 10…6 PZ ZH 16 9013600000 D.10

Sta

mp

ed c

ont

acts

Weidmüller DFF series 0.22…2.5 24…12 HTF DFF 9014140000 D.23

Weidmüller ZRV and MKF series 0.2…0.35 / 0.5…1 24…22 / HTF ZRV 9014840000 D.23

20…17

WeidmüllerRSVandDSTV-HDSystems 0.14…1.5 26…16 HTFRSV16 9013560000 D.23

2.5 14…12 HTFRSV12 9013550000 D.23

Turn

ed c

ont

acts

Turned HD and HE contacts 4…10 12…7 CTX CM 3.6 9018480000 D.18

0.14…4 26...12 CTX CM 1.6/2.5 9018490000 D.18

Turned HD, HE and HX contacts 0.14...6 26...10 CTIN CM 1.6/2.5 9205430000 D.18

1.5...10 16...7 CTIN CM 3.6 9205440000 D.18

Cri

mp

ing

D

D.5

Overview contacts – tools

Crimp contact Crimp type Description Conductor crosssection AWG Crimping tool Order No. pagein mm2 tool

coax

ial c

onn

ecto

rs

coaxial connectors HTG 58 9012000000 D.21

HTG 58/59 9012020000 D.21

HTG 59 9012010000 D.21

HTG 174 9012410000 D.21

HTX 138 9012400000 D.21

HTX 188 9011990000 D.21

coaxial connectors CTX 500 9006320000 D.22

CTX 501 9006370000 D.22

CTX 502 9006380000 D.22

insu

late

d /

no

n-in

sula

ted

co

nnec

tors

insulated connectors 0.5…2.5 20…14 HTI 15 9014400000 D.16

0.5…6 20...10 CTI 6 9006120000 D.15

0.5…6 20...10 CTI 6 G 9202850000 D.15

non-insulated connectors 0.5…6 20...10 HTN 21 9014610000 D.16

0.5…6 20...10 HTN 21 with end stop 9014100000 D.16

10…25 7…3 CTN 25 D4 9006220000 D.17

10…25 7…3 CTN 25 D5 9006230000 D.17

mo

dul

ar p

lug

co

nnec

tors WE-plug (4, 6 and 8-poles) 0.08…0.25 28…24 TT864RSWE 9008120000 D.25

WE-plug (4, 6 and 10-poles) 0.08…0.25 28…24 TT1064RSWE 9008190000 D.25

shielded WE-plug, system Hirose 0.08…0.25 28…24 TT 8 GH 9005640000 D.24

0.08...0.25 28...24 TT8RSMP8 9202800000 D.24

Oth

er c

ont

acts

and

plu

gs

SUB-Dcontacts 0.08…0.5 28…20 HTFSUB-D 9013260000 D.22

flat blade connectors and receptacles 0.1…1 (connec. width 2.8) 27…17 HTF 28 9013090000 D.14

0.5…2,5 (connec. width 4.8) 20…14 HTF 48 9013080000 D.14

0.5…2,5 (connec. width 6.3) 20…14 HTF 63 9013400000 D.14

0.5…6 (connec. width 6.3) 20…14 CTF 63 9202860000 D.14

fibre optic connectors Station1(hexagoncrimp): HTX LWL 9011360000 D.19

3.15 / 6.0 H.-➝ 3.9

Station2(roundcrimp): HTX LWL 9011360000 D.19

4.85 / 6.0 H.-➝ 5.5

IP67 connector IE-CT-SC-GOF 9205320000 D.20

IE-CT-LC-GOF 9205330000 D.20

IE-CT-SC-POF 9205340000 D.20

IE-CT-SC-GOF-P 9205350000 D.20

D

D.6

Crimping tools for wire end ferrules

Technical data

Three functions:•Cutting•Stripping•Crimping

•Wire-endferruleswithplasticcollars,incompliancewithDIN46228-4

•Ratchetforprecisecrimping.•Efficientoperation:Changeoftoolsnot

necessary,resultinginasignificanttimesavings•Automaticconveyanceofwire-endferrules•Quickadjustmentfordifferingcross-sections•Easyhandlingofferrulestrips

Only Weidmüller fifty-piece linked ferrule strips can be processed. The use of wire-end ferrules on reels can lead to damage.

Description of contactTypeofcontactCrimpingrange mm²Crimpingrange1(withmultiplecrimpingpositions) mm²Crimpingrange2(withmultiplecrimpingpositions) mm²Crimpingrange3(withmultiplecrimpingpositions) mm²Crimpingrange4(withmultiplecrimpingpositions) -Crimpingrange5(withmultiplecrimpingpositions) -Tool dataLength mmWeight g

Note

Version

Note

0,5...2,5 mm²

stripax® plus 2.5

Onlystrip-typeproductsfromWeidmüllercanbeprocessed.Theuseofwire-endferrulesonreelscanleadtodamage.

Type Qty Order No.

STRIPAXPLUS2.5 1 9020000000

Spareblade(orderno.:9050340000)

Ordering data

STRIPAX PLUS 2.5Stripsoflinkedwire-endferrules0.5...2.50.5...0.751...1.52.5

210260

•Forprocessinglinkedwire-endferrulesfromWeidmüller0.5...2.5mm²(~AWG20...14)

Cri

mp

ing


D

D.7


Technical data

•Forwire-endferruleswithandwithoutplasticcollars,accordingtoDIN46228T.1andT.4(~AWG24...16)

•Ratchetforprecisecrimping.•Releaseoptionintheeventofincorrect

operation

Description of contactTypeofcontactCrimpingrange mm²Crimpingrange1(withmultiplecrimpingpositions) mm²Crimpingrange2(withmultiplecrimpingpositions) mm²Crimpingrange3(withmultiplecrimpingpositions) mm²Crimpingrange4(withmultiplecrimpingpositions) mm²Crimpingrange5(withmultiplecrimpingpositions) mm²Tool dataLength mmWeight g

Note

Version

Note

0.14...1.5 mm²

PZ 1.5

Type Qty Order No.

PZ1.5 1 9005990000

Ordering data

PZ 1.5Wire-endferruleswith/withoutplasticcollars0.14...1.5

170170

•Onlyonedieforthewholecross-sectionrange•CrimpcomplieswithEuro-NormEN60947-1•Wire-endferruleinsertionfromthefront

PZ 6 HEX

0.14...6 mm²

•Onlyonedieforthewholecross-sectionrange•Wire-endferruleinsertionfromtheside

PZ 6 HEXWire-endferruleswith/withoutplasticcollars0.14...6

180380

Type Qty Order No.

PZ6HEX 1 9013650000

Cri

mp

ing


D

D.8


Technical data



operation


Note

Version

Note

0.5...4 mm²

PZ 4

Type Qty Order No.

PZ4 1 9012500000

Ordering data

PZ 4Wire-endferruleswith/withoutplasticcollars0.5...4

200448

•Onlyonecrimpingstationforthewholecross-sectionrange

•Wire-endferruleinsertionfromtheside

PZ 6/5

0.25...6 mm²

•CrimpcomplieswithEuro-NormEN60947-1•ApprovalaccordingtoVG95211(military

designationVG95236T14B002)•Fivecrimpingstationscorrespondingtothe

conductorcross-sections•Wire-endferruleinsertionfromtheside

PZ 6/5Wire-endferruleswith/withoutplasticcollars0.25...60.25...0.50.75...1.52.546

200423

Type Qty Order No.

PZ6/5 1 9011460000

Cri

mp

ing


D

D.9


Technical data



operation


Note

Version

Note

0.5...6 mm²

PZ 3

Type Qty Order No.

PZ3 1 0567300000

Ordering data

PZ 3Wire-endferruleswith/withoutplasticcollars0.5...6

200426

•Onlyonedieforthewholecross-sectionrange•Wire-endferruleinsertionfromthefront

PZ 6 roto

0.14...6 mm²

•Onlyonedieforthewholecross-sectionrange•Rotatingdieenableswire-endferruleinsertion

fromthefrontorside

PZ 6 RotoWire-endferruleswith/withoutplasticcollars0.14...6

200428

Type Qty Order No.

PZ6Roto 1 9014350000

Cri

mp

ing


D

D.10


Technical data



operation


Note

Version

Note

6...16 mm²

PZ 16

Type Qty Order No.

PZ16 1 9012600000

Ordering data

PZ 16Wire-endferruleswith/withoutplasticcollars6...1661016

200418


designationVG95236T14B002)•Threecrimpingstationscorrespondingtothe


PZ ZH 16

Twin wire-end ferrules from 6...16 mm²

•Threecrimpingstationscorrespondingtotheconductorcross-sections

•Wire-endferruleinsertionfromtheside

PZ ZH 16Twinwire-endferrules6...1661016

250730

Type Qty Order No.

PZZH16 1 9013600000

Cri

mp

ing


D

D.11


Technical data



operation

Description of contactTypeofcontactCrimpingrange mm²Crimpingrange1(withmultiplecrimpingpositions) mm²Crimpingrange2(withmultiplecrimpingpositions) mm²Crimpingrange3(withmultiplecrimpingpositions) mm²Crimpingrange4(withmultiplecrimpingpositions) -Crimpingrange5(withmultiplecrimpingpositions) -Tool dataLength mmWeight g

Note

Version

Note

25...50 mm²

PZ 50

Type Qty Order No.

PZ50 1 9006450000

Ordering data

PZ 50Wire-endferruleswith/withoutplasticcollars25...50253550

250730


designationVG95236T14B002)•Threecrimpingstationscorrespondingtothe


Cri

mp

ing


Cri

mp

ing

D

D.12

Introduction

The crimping technique is one of the most reliable and most versatile connection methods. Extreme quality demands for a variety of different connections require that you use a wide variety of specialized crimping tools which are designed for specific contacts.

Weidmüller offers the right crimping tool for a wide variety of contacts. Regardless if you are using turned contacts, cable-lug connectors, insulated connectors or coaxial connectors.

Crimping tool for custom contacts

Cri

mp

ing

D

D.13

Introduction

D

D.14

Crimping tools for other contacts•Ratchetforprecisecrimping.•Releaseoptionintheeventofincorrect

operation•Withstopforexactpositioningofthecontacts.•Contactandinsulationarecrimpedinonestep

Technical dataDescription of contactTypeofcontactCrimpingrange mm²Crimpingrange1(withmultiplecrimpingpositions) mm²Crimpingrange2(withmultiplecrimpingpositions) mm²Crimpingrange3(withmultiplecrimpingpositions) mm²Plugwidth mmTool dataLength mmWeight g

Note

Ordering dataVersion

Note

HTF 28 / HTF 48 / HTF 63

0.1...2.5 mm²

Forcable-lugsleevesandcable-lug(flatblade)connectorswithpre-rolledcrimpingclaw

HTF 28Connectorwidth:2.8mm,from0.1...1.0mm²HTF 48Connectorwidth:4.8mm,from0.5...2.5mm²HTF 63Connectorwidth:6.3mm,from0.5...2.5mm²

HTF 28 HTF 48 HTF 63F-plug/-sleeve F-plug/-sleeve F-plug/-sleeve0.1...1 0.5...2.5 0.5...2.50.1...0.25 0.5...1 0.5...10.25...0.5 1.5...2.5 1.5...2.50.6...12.8 4.8 6.3

200 200 200438 438 438

Type Qty Order No.

HTF28 1 9013090000

HTF48 1 9013080000

HTF63 1 9013400000

CTF 63

0.5...6 mm²

Forcable-lugsleevesandcable-lug(flatblade)connectorswithpre-rolledcrimpingclaw

CTF 63Connectorwidth:6.3mm,from0.5...6mm²

CTF 63F-plug/-sleeve0.5...60.5...11.5...2.52.6...66.3

250730

Type Qty Order No.

CTF63 1 9202860000

Cri

mp

ing

Crimping tools for other contacts

D

D.15


Technical data


operation•Withstopforexactpositioningofthecontacts.

Description of contactTypeofcontactCrimpingrange mm²Crimpingrange1(withmultiplecrimpingpositions) mm²Crimpingrange2(withmultiplecrimpingpositions) mm²Crimpingrange3(withmultiplecrimpingpositions) mm²Plugwidth -Tool dataLength mmWeight g

Note

Version

Note

0,5...6 mm²

CTI 6 G

Type Qty Order No.

CTI6G 1 9202850000

Ordering data

CTI 6 GInsulatedconnector0.5...60.5...1.51.1...2.52.6...6

250747

ForPVC,PC,andpolyamideinsulatedconnectors0.5...6 mm² (~AWG20...AWG10)

•Parallel-crimpprofile,forcrimpingcontactandinsulationinonestep

CTI 6

0,5...6 mm²

ForPVC,PC,andpolyamideinsulatedconnectors0.5...6 mm² (~AWG20...AWG10)

•Double-crimpprofile,forcrimpingcontactandinsulationinonestep

CTI 6Insulatedconnector0.5...60.5...1.51.1...2.52.6...6

250730

Type Qty Order No.

CTI6 1 9006120000

Cri

mp

ing


D

D.16


Technical data


operation•Withstopforexactpositioningofthecontacts.•TestedaccordingtoDINEN60352part2


Note

Version

Note

0.5...2.5 mm²

HTI 15

Type Qty Order No.

HTI15 1 9014400000

Ordering data

HTI 15Insulatedconnector0.5...2.50.5...1.51.1...2.5

200434

ForPVC,PC,andpolyamideinsulatedconnectors0.5...2.5 mm²(~AWG20...AWG14)

•Double-crimpprofile,forcrimpingcontactandinsulationinonestep

HTN 21

0.5...6 mm²

Foruninsulatedcablelugsandconnectors0.5...6 mm²(AWG20...10)

•Rolledcablelugs,forexampleacc.toDIN46234

•Tubularcablelugs•Pincablelugs•Parallelandserialconnectors•Indentcrimp•Alternativelyavailablewithorwithoutpivotingendstop

HTN 21 HTN 21 M. ANUninsulatedconnection Uninsulatedconnection0.5...6 0.5...60.5...1.5 0.5...1.51.1...2.5 1.1...2.52.6...6 2.6...6

200 200427 427Endstopforsecurecontactpositioningintool

Type Qty Order No.

HTN21 1 9014610000

HTN21M.AN 1 9014100000

Cri

mp

ing


D

D.17


Technical data


operation


Note

Version

Note

10...25 mm²

CTN 25 D 4

Type Qty Order No.

CTN25D4 1 9006220000

Forrolledcablelugs

Ordering data

CTN 25 D4Uninsulatedconnection10...25101625

250730

Foruninsulatedcablelugsandconnectors

10...25 mm²

•Rolledcablelugs,acc.toDIN46234•Pincablelugs•Parallelandserialconnectors•Indentcrimp

CTN 25 D 5

10...25 mm²

Foruninsulatedcablelugsandconnectors

10...25 mm²

•Rolledcablelugs,acc.toDIN46235•Pincablelugs•Parallelandserialconnectors•Hexagoncrimp

CTN 25 D5Uninsulatedconnection10...25101625

250730

Type Qty Order No.

CTN25D5 1 9006230000

Fortubularcablelugs

Cri

mp

ing


D

D.18



operation•Withstopforexactpositioningofthecontacts.

Technical dataDescription of contactTypeofcontactCrimpingrange mm²Crimpingrange1(withmultiplecrimpingpositions) mm²Crimpingrange2(withmultiplecrimpingpositions) mm²Crimpingrange3(withmultiplecrimpingpositions) mm²Crimpingrange4(withmultiplecrimpingpositions) mm²Crimpingrange5(withmultiplecrimpingpositions) mm²Tool dataLength mmWeight g

Note

CTX CM 1.6/2.5•TurnedHDcontacts•TurnedHEcontacts•ConCeptM10andM5contacts•0.14...4.0mm²

CTX CM 3.6•TurnedHDcontacts•ConCeptM3contacts•4.0...10mm²


Note

CTX CM 1.6/2.5 / CTX CM 3.6

0.14...10 mm²

CTX CM 1.6/2.5 CTX CM 3.6Turnedcontacts Turnedcontacts0.14...4 4...100.14...0.5 40.75...1 61.5 102.54

250 250730 730

Type Qty Order No.

CTXCM1.6/2.5 1 9018490000

CTXCM3.6 1 9018480000

CTIN CM 1.6/2.5 / CTIN 3.6

0.14...10 mm²

CTIN CM 1.6/2.5•TurnedHDandHEcontacts•TurnedHXcontacts•ConCeptM10,M5andM3contacts•4-indentcrimp•0.14...4.0mm²

CTIN CM 3.6•TurnedHXcontacts•ConCeptM3contacts•4-indentcrimp•1.5...10.0mm²

CTIN CM 1.6/2.5 CTIN CM 3.6Turnedcontacts Turnedcontacts0.14...6 1.5...100.14...6 1.5...10

230 2301220 1220

Type Qty Order No.

CTINCM1.6/2.5 1 9205430000

CTINCM3.6 1 9205440000

Cri

mp

ing


D

D.19


Technical data


operation

Description of contactTypeofcontactStation1:A/B mmStation2:A/B mmStation3:A/B -C -D -Tool dataLength mmWeight g

Note

Version

Note

HTX LWL

H.-ø:Sleevediameter

Type Qty Order No.

HTXLWL 1 9011360000

Ordering data

HTX LWLFibre-opticconnector3.15/64.85/6

200415

Forfibre-opticcableswith

•corediameterof1mm•CrimpingsleeveØ5.5mm

Station 1:Hexagoncrimp

Station 2:Roundcrimp(forHPconnectors)

Cri

mp

ing


D

D.20



operation

Technical dataTool dataLengthWeight

Note

•Forfibre-opticSC/STandIP67connectors•Forfibre-opticLCandIP67connectors


Note

Accessories

Note

IE-CT-SC-GOF / IE-CT-LC-GOF

Crimping tools for IP 67 plugs

IE-CT-SC-GOF IE-CT-LC-GOF250 250730 730

Type Qty Order No.

IE-CT-SC-GOF 1 9205320000

IE-CT-LC-GOF 1 9205330000

Type Qty Order No.

IE-CTI-SC-GOF 1 9205280000

IE-CTI-LC-GOF 1 9205290000

IE-CT-SC-POF / IE-CT-SC-GOF-P

Crimping tools for IP 67 plugs

•Forpolymerfibre-opticSC/STandIP67connectors

•Forfibre-optic,ProfiNet,MobilcableSC/STandIP67connectors

IE-CT-SC-POF IE-CT-SC-GOF-P250 250730 730

Type Qty Order No.

IE-CT-SC-POF 1 9205340000

IE-CT-SC-GOF-P 1 9205350000

Type Qty Order No.

IE-CTI-SC-POF 1 9205300000

IE-CTI-SC-GOF-P 1 9205310000

Cri

mp

ing


D

D.21



operation

A = Width across flatsB = Crimping widthC = Ø Outer sleeve of the coaxial plugD = Ø Centre contact

Technical dataDescription of contactTypeofcontactStation1:A/B mmStation2:A/B mmStation3:A/B -C mmD mmTool dataLength mmWeight g

Note


Note

HTG174 / HTX138 / HTX188

ForcoaxialconnectorssuchasBNC,TNCandNplugs

•HTX 138forconnectorsonTwinaxcoaxialcable

HTG 174 HTX 138 HTX 188Coaxialconnector Coaxialconnector Coaxialconnector4.52/10 8.24/10 3.25/101.72/2.3 1.72/2.3 1.72/2.3

7.5 9.52 2 2

200 200 200420 420 420

Type Qty Order No.

HTG174 1 9012410000

HTX138 1 9012400000

HTX188 1 9011990000

HTG 58 / HTG 59 / HTG 58/59

ForcoaxialconnectorssuchasBNCandTNCplugs

•WithcablesRG58,RG59,RG62,RG71....

HTG 58 HTG 58/59 HTG 59Coaxialconnector Coaxialconnector Coaxialconnector5.4/10 5.4/10 6.48/101.72/2.3 6.48/10 1.72/2.3

1.72/2.36.2 6.2 7.52 2 2

200 200 200420 420 420

Type Qty Order No.

HTG58 1 9012000000

HTG58/59 1 9012020000

HTG59 1 9012010000

Cri

mp

ing


D

D.22



operation

Technical dataDescription of contactTypeofcontactStation1:A/B mmStation2:A/B mmStation3:A/B -C mmD mmTool dataLength mmWeight g

Note


Note

CTX 500 / 501 / 502

ForcoaxialconnectorssuchasBNC,TNCandNplugswithcoaxialcable

CTX 500 CTX 501 CTX 502Coaxialconnector Coaxialconnector Coaxialconnector10.54/12 10.9/12 9.3/122.54/3.17 2.45/3.17 1.75/2.3

12.2 12.6 10.72.9 2.8 2

250 250 250730 730 730

Type Qty Order No.

CTX500 1 9006320000

CTX501 1 9006370000

CTX502 1 9006380000

HTF SUB-D

AWG 28...20

ForSUB-Dcontactswithopencrimpingclaw

AWG28....20

HTF SUB-DSUB-D

200438

Type Qty Order No.

HTFSUB-D 1 9013260000

Cri

mp

ing


D

D.23



operation•Withstopforexactpositioningofthecontacts.•Contactandinsulationarecrimpedinonestep

Technical dataDescription of contactTypeofcontactCrimpingrange AWGCrimpingrange1(withmultiplecrimpingpositions) AWGCrimpingrange2(withmultiplecrimpingpositions) AWGCrimpingrange3(withmultiplecrimpingpositions) AWGCrimpingrange4(withmultiplecrimpingpositions) AWGCrimpingrange5(withmultiplecrimpingpositions) -Tool dataLength mmWeight g

Note

HTF RSV 16AWG26...16(~0.14...1.5mm²)

HTF RSV 12AWG4...12(~2.5mm²)


Note

HTF RSV 12 / HTF RSV 16

0.14...2.5 mm²

HTF RSV 12 HTF RSV 16 WIRSVandDSTV-HD RSVandDSTV-HD14...12 26...1614 26...2412 22...20

20...2018...16

205 205445 445

Type Qty Order No.

HTFRSV12 1 9013550000

HTFRSV16WI 1 9013560000

HTF ZRV / HTF DFF

0.2...2.5 mm²

HTF DFFforcontactsfromtheWeidmüllerDFFSeries

•0.22...2.5mm²(~AWG24...12)

HTF ZRVforcontactsfromtheWeidmüllerZRVcontactsystemandforMKFflatcontactsfromGrote&Hartmannandsimilardesigns.

•0.2...1.0mm²(~AWG24...17)

HTF ZRV HTF DFFWeidmüllerZRV WeidmüllerDFF0.2...1 0.22...2.50.2...0.35 0.22...0.350.5...1 0.5...1

1.5...2.5

200 205436 445

Type Qty Order No.

HTFZRV 1 9014840000

HTFDFF 1 9014140000

Cri

mp

ing


D

D.24

Pressing tools

Technical data

•PressingtoolformodularplugconnectorsoftheWEsystem(WesternElectricandDEC)


operation

Three functions:•Pressingofplugconnectors•Pressingofenclosureshielding•Crimpingofcableshielding

Description of contactNo.ofpolesTool dataLength mmWeight g

Note

Version

Note

TT 8 GH

Type Qty Order No.

TT8GH 1 9005640000

Ordering data

TT 8GH8

260750

Pressing of IDC contacts

Pressing of shielded enclosures

Crimping of shielded cable

For8-pole(RJ45)shieldedplug(Hirose)forshieldeddatacables

AWG 28...24

TT 8 RS MP 8

For8-poleshieldedRJ45plug

AWG 27...24

TT 8 RS MP 88

2551251

Type Qty Order No.

TT8RSMP8 1 9202800000

Cri

mp

ing

Pressing tools

D

D.25

Pressing tools

Technical data

•PressingtoolfortheWE(WesternElectric)andDECmodularconnectorsystems


operation

3 functions:•Cutting•Stripping•Crimping

Description of contactNo.ofpolesTool dataLength mmWeight g

Note

Version

Note

Note

TT 864 RS WE

Type Qty Order No.

TT864RS 1 9008120000

Type Qty Order No.

ERSATZMESSERSATZTT864 1 9008130000Spare bit set (order no.: 9008130000)

Ordering data

TT 864 RS4,6and8

205525

Accessories

strain-relief cable

strain-relief wires

IDC contacts

Forupto8-poleflatribbonorflat-ovaldatacables

AWG 28...24

•Forattachmentof:4-poleWEplugs6-pole(RJ12)WEplugs6-pole(DEC)WEplugs10-pole(RJ45)WEplugs•TriplecrimpingforRJ45•ForAMPplugsorversionswithsimilardesign•Otherversionsonrequest

TT 1064 RS WE

Forupto10-poleflatribbonorflat-ovaldatacables

AWG 28...24

•Forattachmentof:4-poleWEplugs6-pole(RJ12)WEplugs6-pole(DEC)WEplugs10-pole(RJ45)WEplugs•TriplecrimpingforRJ45•ForAMPplugsorversionswithsimilardesign•Otherversionsonrequest

TT 1064RS10,6and4

205531

Type Qty Order No.

TT1064RS 1 9008190000

Type Qty Order No.

ERSATZMESSERSATZTT864 1 9008130000Spare bit set (order no.: 9008130000)

Cri

mp

ing

Pressing tools

D

D.26

Crimping tools for connectors

•Forinsulatedanduninsulatedcablelugsandconnectors

•Mechanicalfunctionensuressafeandmanageableoperationsunderdifferentenvironmentalconditions

•Precisionengineeringmeanshighpressingforcewithlittlephysicaleffort

•Fastfeedhelpspre-centeringandextractionoftheconnectingparts

•Ratchetforpropertrouble-freecrimping•Releaseoptionintheeventofincorrect

operation•Comprehensiverangeofcrimpinserts

conformingwithstandards

Technical dataDescription of contactPressingforce/Deviation kN/mmCrimpingrangeforcopperconnector(rolled) mm²Crimpingrangeforcoppertubeconnector mm²Crimpingrangeforinsulatedconnectors mm²Crimpingrangeofwireendferrule mm²Tool dataLength/Weight mm/kg

Note

•Tubularcablelugsrangingfrom6...120mm²•RolledCU-connectorsrangingfrom6...70mm²•Wire-endferrulesrangingfrom25...95mm²•Retractableheadforeasywithdrawalofcrimped

connection


Note

Accessories

Note

MTR 35 / MTR 110

6...120 mm²

MTR 35 MTR 11025/8 55/106...35 6...706...50 10...12010...25 10...3525...50 70...95

270/1.3 420/2Formoredetailsseecrimpinsertsonthefollowingpages

Type Qty Order No.

MTR35 1 9017500000

MTR110 1 9018020000

Type Qty Order No.

MTR35-MTR110 1 9017840000

MTR35-MTR110 1 9018040000Crimpinginsertsseeonthefollowingpages

MTR 160 / MTR 300

10...300 mm²

•Tubularcablelugsrangingfrom10...300mm²•RolledCUconnectorsrangingfrom10...150

mm²•Retractableheadforeasywithdrawalofcrimped

connection(onlyMTR300)

MTR 300Turntablepresses:25...240ms;35...240sec

MTR 160 MTR 300100/16 100/1610...150 10...15010...240 10...300

10...120

540/4 540/4Formoredetailsseecrimpinsertsonthefollowingpagessm:sectorconductorstranded;se:sectorsingleconductor

Type Qty Order No.

MTR160 1 9017250000

MTR300 1 9021390000

Type Qty Order No.

MTR160-MTR300 1 9021420000

MTR160-MTR300 1 9017270000Crimpinginsertsseeonthefollowingpages

Cri

mp

ing

Crimping tools for connectors

Cri

mp

ing

D

D.27

Crimping inserts

MTR 35Cross-section Code to Crimping width Order No.

[mm2] DIN 48083 [mm]

Die sets for copper tube cable lugs and connectors DIN 46235 6 5 5.5 9017550000

10 6 5.5 9017560000

16 8 5.5 9017570000

25 10 5.5 9017580000

35 12 5.5 901759000050 14 5.5 9017760000

Cross-section Code to Crimping width Order No.[mm2] DIN 48083 [mm]

Die sets for aluminium tube cable lugs and connectors DIN 4632925 12 7.0 9017600000

35 14 7.0 9017610000

Cross-section [mm2] Crimping width [mm] Order No.

Die sets for copper tube cable lugs and connectors standard types 6 6.0 9017770000

10 6.0 9017620000

16 6.0 9017630000

25 6.0 9017640000

35 6.0 901765000050 6.0 9017660000

Cross-section [mm2] Order No.

Stamp and dies for copper cable lugs and connectors,

DIN 46234, DIN 46230Stamp

6–35 9017670000

Die

6 9017680000

10 9017690000

16 9017700000

25 9017710000

35 9017720000with control mark


Die sets for insulated cable lugs and connectors,

DIN 46231, 4623710 9017990000

16 901800000025 9018010000


Stamp and dies for wire end ferrulesStamp 25–50 9017970000

Die 25 9017740000

Die 35 9017750000Die 50 9017540000


[mm2] DIN 48083 [mm]

Die sets for copper tube cable lugs and connectors DIN 4623510/70 6/16 5.5 9018100000

16/35 8/12 5.5 9018110000

25/50 10/14 5.5 9018120000

95 18 5.5 9018130000

120 20 5.5 9018140000


Die sets for aluminium tube cable lugs and connectors DIN 4632916/35 10/14 7.0 9018800000

25/50 12/16 7.0 9018810000

70 18 7.0 9018820000


Die sets for copper tube cable lugs and connectors standard types10/70 7.0 9018400000

16/35 7.0 9018410000

25/50 7.0 9018420000

95 5.5 9018430000

120 5.5 9018440000


Stamp and dies for copper cable lugs and connectors,

DIN 46234, DIN 46230Stamp

6–70 9018500000

4-way die

10/16/25/35 9018600000

16/25/35/50 9018610000

2-way die

6/50 9018620000

10/70 9018630000

Single die



Die sets for insulated cable lugs and connectors,

DIN 46231, 4623710 7.0 9018700000

16 8.0 9018710000

25 9.0 9018720000

35 9.5 9018730000

Oval crimp with control mark

Crimping insert with spring-mounted locator

Prerounding die sets Cu/Al for sectored cable

25/50 12 9018450000

35/70 12 901846000095 12 9018470000


Die sets for wire end ferrulesPair of dies

70 9023360000

95 9023370000

Cri

mp

ing

D

D.28

Crimping inserts


[mm2] DIN 48083 [mm]


16 8 7.0 9020910000

25 10 7.0 9020920000

35 12 7.0 9020930000

50 14 7.0 9020940000

70 16 7.0 9020950000

95 18 7.0 9020960000

120 20 7.0 9020970000

150 22 7.0 9020980000

185 25 7.0 9020990000

240 28 7.0 9021000000



16/35 9.8 9021760000

50 8.0 9021770000

70 8.0 9021780000

95 8.0 9021790000

120 8.0 9021800000

150 8.0 9021810000

185 8.0 9021820000240 8.0 9021830000


Die sets for copper cable lugs and connectors,

DIN 46234, DIN 46230 10 9021300000

16 9021310000

25 9021320000

35 9021330000

50 9021340000

70 9021350000

95 9021360000

120 9021370000



[mm2] DIN 48083 [mm]


16 8 7.0 9021440000

25 10 7.0 9021450000

35 12 7.0 9021460000

50 14 7.0 9021470000

70 16 7.0 9021480000

95 18 7.0 9022290000

120 20 7.0 9022300000

150 22 7.0 9022310000

185 25 7.0 9022320000

240 28 7.0 9022330000300 32 7.0 9022340000


Die sets for aluminium tube cable lugs and connectors, DIN 46329300 34 7.0 9918190000



16/35 9.8 9024400000

50 8.0 9024410000

70 8.0 9024420000

95 8.0 9024430000

120 8.0 9025210000

150 8.0 9025220000

185 8.0 9025230000240 8.0 9028020000


Die sets for copper cable lugs and connectors,

DIN 46234, DIN 462302-way die

16/35 9022360000

10/70 9022350000

25/50 9022370000

Stamp

10 - 70 9022990000

Single die

95 9022380000

120 9022390000

150 9022400000

Stamp95-150 9023110000


Die sets for insulated copper cable lugs and connectors,

DIN 46231, 46237 10 9016180000

16 9016190000

25 9016200000

35 9016210000

50 9016220000

70 9016230000

95 9016240000120 9016250000

Prerounding die sets Cu/Al for sectored cable 25 sm/35 se 9016260000

35 sm/50 se 9016270000

50 sm/70 se 9016280000

70 sm/95 se 9016290000

95 sm/120 se 9016370000

120 sm/150 se 9016380000

150 sm/185 se 9016390000

185 sm/240 se 9016440000240 sm 9016500000

D

D.29

Insertion tool for twisted-pair cable

Technical data

Forconnectingtwisted-paircabletoterminalrailswithIDCcontactse.g.inmainandfloordistributors,andinmodularwalljunctionboxesforstructuredbuildingcabling.

Length/Width/Height mmWeight g

Note

Version

Note

Note

PDT

Type Qty Order No.

PUNCHDOWNTOOLPDT 1 9013970000

(withoutblade)

Type Qty Order No.

PDbladeKroneLSAPlus(scissor) 1 9014050000

PDblade110 1 9013960000

PDblade630 1 9013990000

PDblade66 1 9013980000

PDbladeKroneLSAPlus(standard) 1 9014000000

Ordering data

PUNCH DOWN TOOL PDT160/37/29142

Accessories

Thepunch-downtoolhasthefollowingfeatures:

•Mechanicsmadefrommetalcomponents•Adjustablepressingforceforconductorsizes

AWG20toAWG28•Differentbladesforconnectorblocksoftype

110fromAT&T,type66,typeLSAPlusfromKrone(Standardandscissorscuttingfunction)aswellasfortelephoneoutlets630A6

•Incisionbladeswith2functions:incisionorincisionwithcuttingoffofremainingconductor

•Storagecompartmentforoneblade

A=PDblade110B=PDblade66C=PDblade630D=PDbladeKroneLSA(standard)E=PDbladeKroneLSA(scissor)

Cri

mp

ing

Insertion tool for twisted-pair cable

D

D.30

Other crimping tools

Technical data

Length mmWeight g

Note

Version

Note

CZ 22 E

Type Qty Order No.

CZ22E0,5-1,5 1 0560400000

Ordering data

CZ 22 E 0,5-1,5230570

CrimpingtoolforprocessingofthecontactsC1E/KandC1E/L(MSsystem)

•2crimpprofilesinonedieforconductorcross-sections:

1.CrimpprofileAWG26-222.Crimpprofile0.5-1.5mm²andAWG18/19

HDC CM 20

HDC CM 20•Forstampedcontactsonrollfrom0.08...0.5

mm²•Contactdiameter1mm•StampedSub-Dcontacts•StampedCM20contacts

HDC-CM-20230650

Type Qty Order No.

HDC-CM-20 1 1700900000

Cri

mp

ing

Other crimping tools

D

D.31

Removal Tool CM3, CM5, HD

CM3 Removal Tool ContactreleasetoolforfreeingcrimpcontactsintheConceptCM3moduleCM5 Removal ToolContactreleasetoolforfreeingcrimpcontactsintheConceptCM5moduleHD Removal Tool ContactreleasetoolforfreeingcrimpcontactsintheConceptCM10module

Type Qty Order No.

RemovalToolCM3 1 1866710000


RemovalToolHD 1 1866730000

Ordering data

Removal Tool M20

ContactreleasetoolforreleasingcrimpcontactsinConCeptCM20modules

Type Qty Order No.


Ordering data

Removal Tool HE

ContactreleasetoolforConCeptHEmodules,andforreleasingcrimpcontactsinConCeptCM4modules

Type Qty Order No.

RemovalToolHE 1 1866750000

Ordering data

HDC-DW RSV 1.6

ContactreleasetoolforConCeptmodules,orfordismantlingstampedHDpinandsocketcontactsoftypeCB/CSandGB/GS

Type Qty Order No.

DWRSV1.6 1 9004530000

Ordering data

DFF-C

DisengagingtoolforremovingcrimpcontactsclippedinBLACenclosures

Type Qty Order No.

DFF-CENTRIEGELUNGSWZ. 1 9014210000

Ordering data

Cri

mp

ing

Disconnect

D

D.32

HTX-HDC/POFPOF crimping

Crimpingoffibreopticcontacts„polymeropticalfibre“(POF).

•Forplugandsocket•Ratchetforprecisecrimping.•Unlocksincaseofincorrectoperation•Locatorforprecisecontactpositioning

Contacts:•Fibre-opticHD-contactsocketforø1.0mmPOF•Fibre-opticHD-contactpinforø1.0mmPOF

Type Qty Order No.

HTX-HDC/POF 1 9010950000

LengthWeight

200mm438g

Technical data

Ordering data

PB LWL/POF / PS LWL/POFPOF polishing

Forprocessingthecutsurfaceoffibre-opticcableswithpolymeropticalfibre(POF).

•Buffingdisc(PSLWL/POF)•Buffingsheet(PBLWL/POF)

Type Qty Order No.

PSLWL/POF 1 9020390000

PBLWL/POF 1 9020400000

Ordering data

AM LWL/POFPOF stripping

Strippingfibre-opticcables.Fibre-opticcableswithpolymeropticalfibre(POF).

•Longitudinalstopwithscaleisbuiltintothetool•Strippingdirectionislengthwisetothefibre•Nodamagetotheopticalfibre

Type Qty Order No.

AMLWL/POF 1 9020360000

Ordering data

Cri

mp

ing

Tools for polymer optical fibre

D

D.33

Cable tie tools

Technical data

Length mmWeight g

Note

Version

Note

RT 1

Type Qty Order No.

CABLETIETOOLRT-1 1 1296000000

Fordetailedinformation,refertocabletiesinthe„MarkingSystems“catalogue.

Ordering data

CABLE TIE TOOL RT-1160260

Forplasticcabletiesof2.5...4.8mmwidthandwithathicknessofmax.1.6mm.

•Tensioningandseparatingofcabletiesinonestep

•Thetensioningforcecanbeadjustedoverawiderangetocoversmalltostandardcableties.

•Forcablebundlesof1.6mmto100mmdiameter

WSM tool automatic

Forsteelcabletieswithawidthof4.6mm

•Tensioningandautomaticseparationofleftovercabletieinonestep

•Forsteelcableties,e.g.,WeidsteelfromWeidmüller

WSM TOOL AUTOMATIC275579

Type Qty Order No.

WSMTOOLAUTOMATIK 1 1774470000

Cri

mp

ing

Cable tie tools

D

D.34

Cable tie tools

Technical data

Length mmWeight g

Note

Version

Note

WSM tool manual

Type Qty Order No.

WSMTOOLMANUELL 1 1774480000

Ordering data

WSM TOOL MANUAL220633

Forsteelcabletieswithawidthof4.6mm

•Fortensioningsteelcableties.Thesurplusendisthenbrokenoffbytwistingit90°.

Cri

mp

ing

Cable tie tools

Documents

Crimping · 2020. 6. 3. · Crimping D D.5 Overview contacts – tools Crimp contact Crimp type Description Conductor crosssection AWG Crimping tool Order No. page in mm2 tool coaxial