Upload
axel-muenchrath
View
231
Download
3
Tags:
Embed Size (px)
DESCRIPTION
Creotecc Produktkatalog
Citation preview
We have been putting our experience and know-how with our products into
practice for more than 25 years. Our aim at Creotecc is to continually develop
and improve all components used in our mounting systems, just as we have done
from the very beginning. Customer satisfaction is a key aspect of our business.
More specifically, we will stand by you as our customer and offer you our exper-
tise, experience in the field, and high-quality service.
The following pages exhibit the results of our continued efforts to make impro-
vements to our products. Our product portfolio contains mounting systems for
all common photovoltaic systems. In our general catalogue we have compiled
everything you require for standardized packages. In addition we offer tailored
solutions to suit your individual needs.
PREFACE
References
Mounting systems
CREOTOOL
ALuMINIuM PROFILES
CREOFIx
CREOTERRA
Technology
06
TABLE OF CONTENTS
08
12
14
22
52
54
2008: Castelcucco, Italy. 2007: Letzigrund Stadium, Zurich, Switzerland.
2009: Museum of Modern Art, S.F., uSA.
1995: Karlsruhe, Germany.
2009: Brindisi, Italy. 2010: Mountain railway Samedan, Switzerland.
1985: Rappenecker Hof, Black Forest, Germany.
REFERENCES
06We were already working on our first large-scale project when others were only
dreaming about what the future of photovoltaics and solar energy would hold.
Our mounting systems are based on 25 years of experience. And this experience
is impressive, whether implemented on Lake Tahoe in the u.S., in umbria in Italy,
or in the Black Forest in Germany.
Creotecc GmbH is a product developer and manufacturer of photovoltaic mount-
ing systems. We are based in Freiburg im Breisgau, where we develop high-qual-
ity systems for roof, façade, and ground mounted systems. We can deliver what
you require, no matter if it’s a standardized package for a small or large-scale
project, or even a tailored solution for a specific system.
Choose Creotecc because we are the right partner for your photovoltaic needs.
THE FuTuRE WAS THERE FROM THE BEGINNING
The roof-parallel installation on a pitched roof is the conventional form of mount-
ing solar modules. We off er on-roof solutions for pantile or slate roofs and roofs
with shingles or plain tiles, to name a few. It does not matter what type of roof
cladding you have. We will fi nd the right type of attachments for your project.
Furthermore it goes without saying that all systems will not adversely aff ect the
water-tightness of the roof and take into account factors such as wind and snow
loads.
MOuNTING SYSTEMS
CONVENTIONAL SYSTEMS FOR PITCHED ROOF SuRFACES
08
The majority of fl at roofs have large, unused surfaces that are ideal for photo-
voltaic systems. A corresponding substructure for our mounting system can be
easily manufactured for module installation. We manufacture aluminium profi le
frames specifi cally made for the corresponding pitch of your roof. They can also
be installed on fl at or hall roofs with the proper attachment technology. We also
off er systems with insertion or clamping systems, depending on your needs.
SYSTEMS FOR SQuARE BuILDINGS AND LOW ROOF PITCHES
Modules for ground mounted photovoltaic systems need to be installed using
special frames in order to ideally utilize the space. Creotecc uses aluminium-only
frame holders and high-quality galvanized steel piles for the ground mounted
systems. In this manner we can guarantee that your system is long-lasting and
corrosion resistant.
Upon request we will also take charge of the site assessment (soil analysis, test
pile drives, and rock drilling), calculate your project statics, and help you obtain
a construction permit.
MOuNTING SYSTEMS
SYSTEMS FOR FREE SPACES WITHOuT BuILDINGS
10
Buildings with large available surfaces are particularly advantageous for integ-
rating photovoltaic systems into the façade. All kinds of modules can be suspen-
ded from the façade and mounted without any unsightly gaps or uneven lines.
The continuous design defi nes the optical parameters and the entire surface is
covered with glass. The harmonious look is rounded off by color-coordinated
frames and rails. Our façade structures are perfect for framed and unframed
modules, producing secure and attractive elements.
SYSTEMS FOR BuILDING ExTERIORS
CREOTOOL
We strongly believe in providing good service. For just this reason we at Creotecc work on de-
veloping tools that provide you with support throughout the entire project. These tools include
ones that help in planning and sizing substructures for photovoltaic systems. For example, our
CREOTOOL software enables you to plan systems for a variety of roofs in just a few simple
clicks. We’re talking end-to-end assistance as CREOTOOL covers the entire planning process,
ranging from the graphic design of the roof to planning and calculating roof-parallel systems,
and including the creation of a bill of materials for a ready-to-install system. All results and
bills of materials are documented in a clear and concise manner. In addition there is a web-
based update feature that ensures your software is always up-to-date.
CREO
TOO
L
1 2
Once you have entered the location, project data, and customer data, you need
to reproduce the roof surface. Exclusion zones such as dormers, chimneys, and
roof windows can be arranged on your virtual roof using the drag-and-drop fea-
ture. You can either select a preset module type from our database or you can
establish your own type of module layout. Then you calculate the static load-
ing. When all entries are complete, you will automatically receive a detailed bill
of materials for the system, a project report with all technical drawings, and a
ready-to-ship order list that can be sent to us electronically.
YOuR BENEFITS AT A GLANCE
Reproducible quality for the planning procedures
Calculation of static loading for the substructure in accordance with DIN 1055
Bill of materials and system documentation as a result of planning
Flexible and efficient planning
Bill of materials in only a few steps
Option of entering data manually
Standard values and settings
updates from Creotecc to maintain product databases up-to-date
Option of processing orders electronically
HOW TO PLAN WITH CREOTOOL: IT ’S JUST THAT EASY
ALu
MIN
IuM
PRO
FILE
S
1 4
Technical maturity, quality, and reliability of the materials are decisive in ensur-
ing that your photovoltaic system enjoys a long service life. At Creotecc we use
aluminium to manufacture our profiles, which offers you a genuine competitive
advantage. Aluminium profiles weigh less, making them much more affordable.
Yet that isn’t all. Creotecc also strongly believes in continually reviewing and
improving our products.
For this reason we have developed the ALuTEC insertion system made of alu-
minium, which has proven itself time and again. This system has gained a solid
position on the market thanks to our principle of continual development and has
become a guarantee for the high quality and load capacity of our products.
The following pages contain our offer of aluminium profiles.
HIGH-QuALITY ALuMINIuM ATTACHMENTS
ALuMINIuM RAILS
Vertical rail for laterally screwing on the roof hooks, standard spans and loads, delivery length 6000 mm
RL ALuVER STANDARD
a in mm b in mm item no.
30 50 020000
Vertical rail for laterally screwing on the roof hooks, for increased spans and loads, delivery length 6000 mm
RL ALuVER PREMIuM
a in mm b in mm item no.
40 60 020057
Vertical rail for wide spans and loads,delivery length 6000 mm
RL ALuVERPLuS xL
a in mm b in mm item no.
50 100 020002
b
aa
b
a
b
a
b
ALu
MIN
IuM
PRO
FILE
S
1 6
Vertical rail for maximum spans and loads,delivery length 6000 mm
RL ALuVERPLuS xxL
a in mm b in mm item no.
65 120 020003
ALuMINIuM RAILS
Horizontal rail for inserting framed modules with a frame height of 35–50 mm, delivery length 6000 mm
RL ALuTEC
a in mm b in mm c in mm item no.
RL Alutec 35 56 54 36,3 020027
RL Alutec 36 56 55 37,3 020028
RL Alutec 38 56 57 39,3 020029
RL Alutec 40 56 59 41,3 020030
RL Alutec 41 56 60 42,3 020031
RL Alutec 42 56 61 43,3 020032
RL Alutec 43 56 62 44,3 020033
RL Alutec 45 56 64 46,3 020034
RL Alutec 46 56 65 47,3 020035
RL Alutec 50 56 69 51,3 020036
Support rail for installing between ALuTEC rails for extended length modules and for heavy snow loads, delivery length 6000 mm
RL ALuTEC BP
a in mm b in mm item no.
39 17 020006
a
b
a
b
a
b
c
ALuMINIuM RAILS
Horizontal rail for inserting frameless modules with special vertical reinforcement, delivery length 5550 mm
RL ALuTEC 42 FL
a in mm b in mm c in mm item no.
69 73 42 020008
Horizontal frame for inserting frameless modules with a glass thickness of approx. 7 mm in conjunction with EPDM rubber inserts, delivery length 6050 mm
RL ALuTEC FL
a in mm b in mm c in mm item no.
69 48 17 020009
Horizontal rail for inserting frameless moduleswith a glass thickness of approx. 7 mm, for wide spans, only in conjunction with EPDM rubber inserts, delivery length 6050 mm
RL ALuTEC FL xL
a in mm b in mm c in mm item no.
89 80 17 020010
a
b
c
a
b
c
a
b
c
ALu
MIN
IuM
PRO
FILE
S
1 8
ALuMINIuM RAILS
CREODuR mounting rail for fastening framed modules with module clamps, delivery length of 6000 mm
RL CREODuR
a in mm b in mm c in mm item no.
30 51,5 020007
All rails can be anodised in different colours. Please request for delivery time. The shown anodic oxidation colours are available.
ANODIC OxIDATION COLOuRS
a
b
ALuTEC FL rail connector, aluminium,length 150 ± 5 mm
FL PC2
a in mm b in mm item no.
78 31 020037
a
b
ALuMINIuM RAILS
ALuTEC rail connector, aluminium,length 150 ± 5 mm
PC1
a in mm b in mm item no.
65 16 020041
ALuVERPLuS xxL rail connector, aluminium,length 200 mm ± 5 mm
AVP xxL PC1
a in mm b in mm item no.
60 112,5 020042
ALuVERPLuS xL rail connector, aluminium,length 200 mm ± 5 mm
AVP xL PC1
a in mm b in mm item no.
45,6 85 020044
a
b
a
b
a
b
ALu
MIN
IuM
PRO
FILE
S
2 0
ALuMINIuM RAILS
ALuVER Standard rail connector, aluminiumlength 150 mm ± 5 mm
AVS PC1
a in mm b in mm item no.
27 41 020045
ALuVER Premium rail connector, aluminium, length 150mm ± 5 mm
ALuVER PREMIuM PC1
a in mm b in mm item no.
36,4 51 020046
a
b
a
b
CREODuR rail connector for mounting rail, delivery length of 150 mm
CD PC1
a in mm b in mm Art.-Nr.
26,4 41,7 020047
a
b
CREO
FIx
2 2
Photovoltaic systems also need to withstand adverse weather conditions. The
quality of the attachment system is essential in this respect. Our CREOFIX roof
hooks are the result of in-depth research and development. The material we
use, our workmanship, and the shape are intended to withstand maximum load
capacities and provide for optimum handling. All roof hooks are subjected to a
multi-stage quality check and have been awarded official approval. Our range
of products includes the corresponding shape for each mounting system and
it is rounded off by a range of bolts, solar fasteners, seam clamps, and module
clamps. We develop and test new types of hooks on a regular basis.
We value certain qualities, just as you do, when developing our roof hooks: stabil-
ity, versatility, and high load-bearing capacities. You can reduce any deforming to
a minimum when using CREOFIx roof hooks thanks to their high rigidity. The high
load-bearing capacity of the roof hooks is documented in the building regulations
approval. The number of required roof hooks can be reliably and comprehensibly
calculated in accordance with current standards. You can compensate for un-
even roof surfaces using the slotted hole version. In addition CREOFIx roof hooks
are extremely lightweight in comparison to stainless steel hooks, weighing only
340–440 grams. Stability and reliability with CREOFIx roof hooks.
CAST ALuMINIuM ROOF HOOKS
BASE ELEMENTS
CREOFIx cast aluminium roof hook for pantiles,S-shape, mounted from front, slotted hole 9 x 35 mm,height adjustment at header up to 24 mm with corrugation,height adjustment at footer +9/-6 mm (reference: 30 cm grid batten),lateral adjustment at footer +/- 55 mm compared to centre position
HSA 561
item no.
030111
CREOFIx cast aluminium roof hook for pantiles,S-shape, centre bracket, side assembly, slotted hole 8.5 x 35 mmboth sides corrugated around the slotted hole with 2 mm grid dimensions
HSA 533
item no.
030011
CREOFIx cast aluminium roof hook for pantiles,S-shape, centre bracket, mounted from front, slotted hole and corrugation.
HSA 544
item no.
030013
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-515
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-515
CREO
FIx
2 4
CREOFIx cast aluminium roof hook for pantiles, C-shape, centre bracket, mounted from below, height adjustment up to 24 mm with catch and M8 screw, slotted hole 9 x 40 mm with upper corrugations, flat design, 40 mm distance beneath bracket
HCA 547
item no.
030014
BASE ELEMENTS
CREOFIx cast aluminium roof hook for pantiles,C-shape, centre bracket, mounted from below, slotted hole 11 x 40 mm
HCA 504
item no.
030000
CREOFIx cast aluminium roof hook for pantiles,C-shape, centre bracket, lightweight design,mounted from below, slotted hole 11 x 40 mm
HCA 505
item no.
030001
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-515
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-515
BASE ELEMENTS
CREOFIx cast aluminium roof hook for pantiles,L-shape, centre bracket, lightweight design, mounted from front, slotted hole 11 x 40 mm
HLA 507
item no.
030002
CREOFIx cast aluminium roof hook for pantiles, C-shape, centre bracket, mounted from below, height adjustment up to 24 mm with catch and M8 screw, slotted hole 8.5 x 40mm with corrugation on top
HCA 536
item no.
030012
CREOFIx cast aluminium roof hook for pantiles, C-shape, centre bracket, mounted from below, height adjustment up to 24 mm with catch and M8 screw, slotted hole 11 x 40 mm with upper corrugations
HCA 552
item no.
030015
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-515
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-515
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-515
CREO
FIx
2 6
CREOFIx cast aluminium roof hook for pantiles, C-shape, centre bracket, mounted from below, height adjustment up to 24 mm with catch and M8 screw, slotted hole 11 x 40 mm with upper corrugations, flat design, 40 mm distance beneath bracket
HCA 553
item no.
030016
BASE ELEMENTS
Roof hook for spanish tiles roof,stainless steel 6 mm, C-shape, mounted from below,slotted hole 11 x 41 mm in mounting bracket, total height 185–215 mm,height adjustment up to 30 mm above base plate,base plate horizontal 150 x 60 mm with 10 holes 9 mm
HME-H
item no.
030113
Roof hook for spanish tiles roof,stainless steel 6 mm, C-shape, mounted from below,slotted hole 11 x 41 mm in mounting bracket, total height 185–215 mm,height adjustment up to 30 mm above base plate,base plate vertical 150 x 60 mm with 10 holes 9 mm
HME-V
item no.
030114
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-515
BASE ELEMENTS
Slate tile roof hook, stainless steel V2A, Dimensions: 250 x 30 x 5 mm,3 x 7 mm countersunk holes, slotted hole: 11 x 40 mm
HDE
item no.
030030
Stainless steel pantile roof hook for 24 mm batten, C-shape, mounted from below,width: 40 mm, thickness: 6 mm, slotted hole: 11 x 40 mm
HCE 24
item no.
030031
Pantile roof hook V2A, for 24 mm batten, S-shape, centre bracket, mounted from side, 3 holes
HSE 24
item no.
030032
CREO
FIx
2 8
BASE ELEMENTS
Plain tile roof hook, stainless steel, length 300 mm,fits plain tile shim 030170 BSB vz,mounted from below with M10
HBE 300
a in mm b in mm item no.
300 30 030033
a
b
Solar fastener A 8,4/M10 with sheet gasket, on wood structures
CSF-A 8 ,4 K
a in mm b in mm c in mm d in mm item no.
CSF-A 8,4/M10 x 80/50-E19-K 8,4 80 50 10 030043
CSF-A 8,4/M10 x 100/50-E19-K 8,4 100 50 10 030044
CSF-A 8,4/M10 x 130/50-E19-K 8,4 130 50 10 030045
CSF-A 8,4/M10 x 150/50-E19-K 8,4 150 50 10 030046
CSF-A 8,4/M10 x 180/50-E19-K 8,4 180 50 10 030047
CSF-A 8,4/M10 x 200/50-E19-K 8,4 200 50 10 030048
CSF-A 8,4/M10 x 80/70-E19-K 8,4 80 70 10 030049
CSF-A 8,4/M10 x 100/70-E19-K 8,4 100 70 10 030050
CSF-A 8,4/M10 x 130/70-E19-K 8,4 130 70 10 030051
CSF-A 8,4/M10 x 150/70-E19-K 8,4 150 70 10 030052
CSF-A 8,4/M10 x 180/70-E19-K 8,4 180 70 10 030053
CSF-A 8,4/M10 x 200/70-E19-K 8,4 200 70 10 030054
Solar fastener A 8,4/M10 with bell gasket, on wood structures
CSF-A 8 ,4 GLD
a in mm b in mm c in mm d in mm item no.
CSF-A 8,4/M10 x 80/50-GLD 8,4 80 50 10 030055
CSF-A 8,4/M10 x 100/50-GLD 8,4 100 50 10 030056
CSF-A 8,4/M10 x 130/50-GLD 8,4 130 50 10 030057
CSF-A 8,4/M10 x 150/50-GLD 8,4 150 50 10 030058
CSF-A 8,4/M10 x 180/50-GLD 8,4 180 50 10 030059
CSF-A 8,4/M10 x 200/50-GLD 8,4 200 50 10 030060
CSF-A 8,4/M10 x 80/70-GLD 8,4 80 70 10 030061
CSF-A 8,4/M10 x 100/70-GLD 8,4 100 70 10 030062
CSF-A 8,4/M10 x 130/70-GLD 8,4 130 70 10 030063
CSF-A 8,4/M10 x 150/70-GLD 8,4 150 70 10 030064
CSF-A 8,4/M10 x 180/70-GLD 8,4 180 70 10 030065
CSF-A 8,4/M10 x 200/70-GLD 8,4 200 70 10 030066
b
a d
c
b
a d
c
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-555
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-555
Solar fastener A 8,0/M10 with bell gasket, on steel structures
CSF-Z 8 ,0 GLD
a in mm b in mm c in mm d in mm item no.
CSF-Z 8,0/M10 x 80/50-GLD 8,0 80 50 10 030090
CSF-Z 8,0/M10 x 100/50-GLD 8,0 100 50 10 030091
CSF-Z 8,0/M10 x 125/50-GLD 8,0 125 50 10 030092
CSF-Z 8,0/M10 x 150/50-GLD 8,0 150 50 10 030093
CSF-Z 8,0/M10 x 160/50-GLD 8,0 160 50 10 030094
CSF-Z 8,0/M10 x 200/50-GLD 8,0 200 50 10 030095
CSF-Z 8,0/M10 x 80/70-GLD 8,0 80 70 10 030096
CSF-Z 8,0/M10 x 100/70-GLD 8,0 100 70 10 030097
CSF-Z 8,0/M10 x 125/70-GLD 8,0 125 70 10 030098
CSF-Z 8,0/M10 x 150/70-GLD 8,0 150 70 10 030099
CSF-Z 8,0/M10 x 160/70-GLD 8,0 160 70 10 030100
CSF-Z 8,0/M10 x 200/70-GLD 8,0 200 70 10 030101
b
a d
c
Hanger bolt, stainless steel V2A
STH
d in mm l in mm item no.
STH 10 x 180 10 180 030038
STH 12 x 200 12 200 030039
STH 12 x 250 12 250 030040
STH 10 x 200 10 200 030041
STH 12 x 300 12 300 030042
l
d
BASE ELEMENTS
Solar fastener A 8,0/M10 with sheet gasket, on steel structures
CSF-Z 8 ,0 K
a in mm b in mm c in mm d in mm item no.
CSF-Z 8,0/M10 x 80/50-E19-K 8,0 80 50 10 030078
CSF-Z 8,0/M10 x 100/50-E19-K 8,0 100 50 10 030079
CSF-Z 8,0/M10 x 125/50-E19-K 8,0 125 50 10 030080
CSF-Z 8,0/M10 x 150/50-E19-K 8,0 150 50 10 030081
CSF-Z 8,0/M10 x 160/50-E19-K 8,0 160 50 10 030082
CSF-Z 8,0/M10 x 200/50-E19-K 8,0 200 50 10 030083
CSF-Z 8,0/M10 x 80/70-E19-K 8,0 80 70 10 030084
CSF-Z 8,0/M10 x 100/70-E19-K 8,0 100 70 10 030085
CSF-Z 8,0/M10 x 125/70-E19-K 8,0 125 70 10 030086
CSF-Z 8,0/M10 x 150/70-E19-K 8,0 150 70 10 030087
CSF-Z 8,0/M10 x 160/70-E19-K 8,0 160 70 10 030088
CSF-Z 8,0/M10 x 200/70-E19-K 8,0 200 70 10 030089
b
a d
c
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-555
DIBt Berlin
Allg
emei
ne bauaufsichtliche Zulassung
Z-14.4-555
CREO
FIx
3 0
BASE ELEMENTS
Hanger bolt set with nuts and seal, pre-assembled with base plate GPS1
STH-SET PRE-ASSEMBLED
a in mm b in mm c in mm d in mm item no.
STH-Set 10 x 200 GPS1 10 200 030073
STH-Set 12 x 200 GPS1 12 200 030074
STH-Set 12 x 250 GPS1 12 250 030075
STH-Set 12 x 300 GPS1 12 300 030076
Hanger bolt set with nuts and seal
STH-SET
a in mm b in mm c in mm d in mm item no.
STH-Set 10 x 200 10 200 030067
STH-Set 12 x 200 12 200 030068
STH-Set 12 x 250 12 250 030069
STH-Set 12 x 300 12 300 030070
l
d
l
d
CREOFLEx triangle for elevated PV installations on flat roofs or slanted roofs
CREOFLEx 1100 / 1300 / 1500
a in mm b in mm α in ° item no.
CREOFLEx 1100 15° / 20° 1100 1057,0 15 / 20 030102
CREOFLEx 1300 15° / 20° 1300 1308,5 15 / 20 030104
CREOFLEx 1500 15° / 20° 1500 1547,0 15 / 20 030106
CREOFLEx 1100 25° / 30° 1100 1057,0 25 / 30 030103
CREOFLEx 1300 25° / 30° 1300 1308,5 25 / 30 030105
CREOFLEx 1500 25° / 30° 1500 1547,0 25 / 30 030107
b
a
α
BASE ELEMENTS
CREOFLEx triangle for elevated PV installations on flat roofs or slanted roofs
CREOFLEx 2000 / 2300 / 3100
Plastic flat roof trayincl. 2 aluminium rails and fastening material, for gravel fillingL x W x H: 1600 x 800 x 450 mm
RuC 4 .1
l in mm b in mm h in mm item no.
1600 800 450 030118
a in mm b in mm α in ° item no.
CREOFLEx 2000 15° / 20° 2000 2070 15 / 20 030175
CREOFLEx 2300 15° / 20° 2300 2470 15 / 20 030179
CREOFLEx 3100 15° / 20° 3100 3475 15 / 20 030177
CREOFLEx 2000 25° / 30° 2000 2070 25 / 30 030176
CREOFLEx 2300 25° / 30° 2300 2490 25 / 30 030178
CREOFLEx 3100 25° / 30° 3100 3510 25 / 30 030180
b
a
α
TSM3 base with 2 drill holes, cut from ALuVERPLuS rail and drilledlength: 250 mm
TSM3-SO
a in mm b in mm c in mm item no.
50 250 50 030119
b
a
c
CREO
FIx
3 2
TSM3 base with 2 drill holes cut from ALuVERPLuS rail and drilledfor 333 mm grid dimensions, total length 383 mm
TSM3-SO RM333
a in mm b in mm c in mm item no.
50 383 50 030120
TSM4 for ALUTEC rails on trapezoidal metal sheet roofs,comprising TSM4 bracket (pre-assembled) plus 2 sheet metal screws(delivered in packages of 20 sets)
TSM4
a in mm b in mm c in mm item no.
128 28 + 17,5 3 030123
a
b
b
a
c
BASE ELEMENTS
Base plate for hanger bolt M10, aluminium 6 mm,95 x 60 x 30 mm, 1 round hole 10,5 mm, 1 slotted hole 10,5 x 20 mm,lateral 1 round hole 9,0 mm
GPS1 M10
a in mm b in mm c in mm t in mm item no.
96 60 30 6 030164
a
b
c
≠ t
BASE ELEMENTS
Base plate for hanger bolt M12, aluminium 6 mm,95 x 60 x 30 mm, 1 round hole 10,5 mm, 1 slotted hole 12,5 x 20 mm,lateral 1 round hole 9,0 mm
GPS1 M12
a in mm b in mm c in mm t in mm item no.
96 60 30 6 030168
M8 28/15 A2 threaded plate
TP 28/15
a in mm b in mm c in mm item no.
28 13,3 8 030169
a
b
c
a
b
c
Mini bridge for ALuVERPLuS and ALuVERPLuS xL
GPS2
a in mm b in mm c in mm t in mm item no.
130 60 30 5 030165
b
a
c
≠ t
CREO
FIx
3 4
BASE ELEMENTS
Mini bridge for ALuVERPLuS xxL
GPS2 xxL
a in mm b in mm c in mm t in mm item no.
145 60 30 5 030166
Maxi bridge for ALuVERPLuS and ALuVERPLuS xL
GPS3
a in mm b in mm c in mm t in mm item no.
400 123 65 4 030167
b
a
c
b
a
c
Adapter angle bracket with corrugation, aluminium, fits Creotecc rails, additional height adjustment from +16 mm to +42 mmon roof hook S-shape with corrugation, borehole 9 mm,height adjustment on adapter angle bracket continuously variable +26 mm
ADW2
a in mm b in mm c in mm d in mm t in mm item no.
20 50 55 56 6 30161
ab
c
d
BASE ELEMENTS
Fits Creotecc rails, additional continuously height adjustment from +16 mm to +42 mm; for mounting on trapezoidal metal sheet roofs and as adapter for roof hooks C-shape
ADW4
a in mm b in mm c in mm item no.
56 56 55 030164
Plain tile shim, galvanised,replacement for tile under hook, protects subjacent tiles,hook is mountable on complete width, delivered with wedge from foamed plastic
BSB vZ
a in mm b in mm item no.
207 375 030170
a
b
a
b
a
b
c
CREO
FIx
3 6
SMALL PARTS
ALuTEC aluminium retaining clip, for mounting ALuTEC rails and ALuTEC support rails on ALuVER rails, Creoflex triangles, etc.
HC2
a in mm b in mm item no.
50 33 040000
CREODuR aluminium retaining clip,for mounting CREODuR rails on ALuVER rails, CREOFLEx triangles, etc.
HC3
a in mm b in mm c in mm item no.
32 22 12 040128
Pre-mounted module middle clamp with M8 A2 hexagon socket screws and 28/15 A2 threaded plate
CD MMC
a in mm b in mm Modulrahmen item no.
CD MMC 32/36 15,5 70 32 – 36 040001
CD MMC 37/41 15,5 70 37 – 41 040002
CD MMC 42/46 15,5 70 42 – 46 040003
CD MMC 47/51 15,5 70 47 – 51 040004
a
b
a
b
c
a
b
Pre-mounted module middle clamp with M8 A2 hexagon socket screws and 28/15 A2 threaded plate
CD MEC
a in mm b in mm item no.
CD MEC 35 35 70 040005
CD MEC 38 38 70 040006
CD MEC 40 40 70 040007
CD MEC 42 42 70 040012
CD MEC 43 43 70 040008
CD MEC 46 46 70 040009
CD MEC 50 50 70 040010
SMALL PARTS
ALuTEC edge stop, cast aluminium, 49 x 49 mm, with »CreoTecc« writing
RA6
a in mm b in mm item no.
49 49 040018
ALuTEC FL edge stop, aluminium
RA2
a in mm b in mm c in mm item no.
70 50 50 040022
a
b
b
a
b
a c
CREO
FIx
3 8
SMALL PARTS
End cap for ALuVER Standard rail, with writing »CreoTecc«, PA plastic, uV and weather resistant, black
TOP AVS CT
End cap for ALuVER Standard rail, with writing »CreoTecc«, PA plastic, uV and weather resistant, black
TOP ALuVER PREMIuM CT
a in mm b in mm s in mm item no.
40 60 3,5 040027
a in mm b in mm t in mm item no.
30 50 4 040024
Black cable-tie clip, for to 1–3 mm metal flange (KC1) or 3–6 mm metal flange (KC2)
KC
a in mm item no.
KC1 200 040029
KC2 200 040034
a
b
a
b
a
SMALL PARTS
Cable collector for C slot for routing cables along ALuVERPLuS R rail
KS2
a in mm b in mm item no.
40 28 040036
EPDM rubber for ALuTEC FL edge stop
Ru RA2
a in mm b in mm t in mm item no.
70 47 1 040037
Cable tie, black
KC
a in mm item no.
KC3 140 040030
KC4 200 040031
KC5 280 040032
KC7 300 040033
KC6 360 040035
a
a
b
a
b
CREO
FIx
4 0
SMALL PARTS
EPDM rubber insert, for securing modules in ALuTEC and ALuTEC xL (against wind-induced shift at low inclination < 10° or unauthorised module removal)
RuT
EPDM rubber insert, for securing modules in ALuTEC FL and ALuTEC FL xL(against wind-induced shift at low inclination < 10° or unauthorised module removal)
RuT FL
a in mm b in mm item no.
40 22 040039
EPDM rubber insert used as a lateral spacer for frameless glass modules with a thickness of approx. 7 mm, length 40 mm
Ru1 FL 40
a in mm b in mm c in mm item no.
21 16 7 040040
a in mm b in mm item no.
40 17 040038
a
b
a
b
a
bc
SMALL PARTS
EPDM rubber insert for mounting frameless glass modules with a thickness of ca. 7 mm in connection with insertion rail ALuTEC FL & ALuTEC FL xL, length 80 mm
Ru1 FL 80
a in mm b in mm c in mm item no.
21 16 7 040041
EPDM rubber 250 x 50 x 2 mm for TSM3 set
Ru 250 x 50 x 2
a in mm b in mm c in mm item no.
250 50 15 040043
a
bc
a
b
c
EPDM sealing washer A2 8.4 x 19 mm
Ru D19 - 8 ,4
a in mm b in mm c in mm item no.
8,4 19 3 040048
a b
c
CREO
FIx
4 2
SMALL PARTS
Hexagon socket screw with cylinder head A2 DIN 912 (ISO4762)
SES-I
d in mm l in mm item no.
SES-I 8 x 40 8 40 040060
SES-I 8 x 50 8 50 040061
SES-I 8 x 55 8 55 040062
SES-I 8 x 60 8 60 040063
EPDM pad, self-adhesive, to be attached on metal roof beneath ALuTEC rails in systems TSM4 and similar (100 pcs. on a roll)
Ru TSM4 70 x 28 x 3
Hexagonal bolt A2 DIN 933
SES
a in mm b in mm c in mm item no.
70 28 3 040050
d in mm l in mm item no.
SES 10 x 30 10 30 040052
SES 8 x 10 8 10 040053
SES 8 x 12 8 12 040054
SES 8 x 16 8 16 040055
SES 8 x 18 8 18 040056
SES 8 x 20 8 20 040057
SES 8 x 25 8 25 040058
SES 8 x 35 8 35 040059
a
b
c
l
d
l
d
SMALL PARTS
Countersunk screw DIN 7991/A2
SKS
d in mm l in mm item no.
SKS 8 x 30 8 30 040100
SKS 10 x 20 10 20 040064
SKS 10 x 25 10 25 040065
SKS 10 x 30 10 30 040066
T-head bolt A2 Typ 28/15
HKS
d in mm l in mm item no.
HKS 8 x 30 8 30 040101
HKS 8 x 25 8 25 040102
HKS 8 x 20 8 20 040103
Stainless steel self-drilling screw V2A, with hexagon head
BOS
d in mm l in mm item no.
BOS 5,5 x 26 5,5 26 040104
BOS 4,8 x 16 4,8 16 040074
BOS 4,8 x 38 4,8 38 040076
d
l
l
d
l
d
CREO
FIx
4 4
SMALL PARTS
6 x 80 chipboard screw countersunk Torx drive, galvanised
SPS 6 x 80
d in mm l in mm item no.
6 80 040112
Screw for thin metal sheets, self-drilling without chip formation, hexagon head 8 mm, EPDM gasket on washer
DBS 4 ,5x25
l in mm d in mm item no.
25 4,5 040133
Self-tapping screw for ALuTEC edge stop, V2A,(item no. 040078 with one-way-drive head)
BLS
d in mm l in mm item no.
BLS 6,3 x 38 6,3 38 040078
BLS 6,3 x 19 6,3 19 040079
l
d
l
d
l
d
SMALL PARTS
Grub screw M6 x 12 DIN 914/A2with thread lock
GWS 6 x 12
d in mm l in mm item no.
6 12 040148
Assy 3.0SK screw with pan head and AW40 drive
ASSY 3 .0SK
d in mm l in mm item no.
ASSY 3.0SK 8 x 100 8 100 040113
ASSY 3.0SK 8 x 120 8 120 040114
ASSY 3.0SK 8 x 140 8 140 040115
ASSY 3.0SK 8 x 260 8 260 040116
Riveting nut M10 with dome head A2
RIV M10-V2A F
d1 in mm d2 in mm l in mm item no.
13 16 17 040117
d
l
d 2
l d1
d
l
CREO
FIx
4 6
SMALL PARTS
Hexagonal nut DIN 934/A2
SEM
d in mm sw in mm item no.
SEM M12 12 19 040120
SEM M10 10 17 040121
SEM M8 8 13 040093
Riveting nut M8 with dome head A2
RIV M8-V2A F
d1 in mm d2 in mm l in mm item no.
11 15 16 040118
Hexagonal nut M8 DIN 985/A2, self-locking
SEM M8SI
d in mm sw in mm item no.
8 13 040119
d 2
l d1
sw
d
sw
d
SMALL PARTS
Locking nut A2
SEM SP
Bezeichnung sw in mm d in mm item no.
SEM M8Sp 13 8 040122
SEM M10Sp 15 10 040123
SEM M12Sp 18 12 040124
Spacer for roof hooks (adjustment to high battens), PE plastic, thickness 2 or 5 mm
uLP
t in mm colour item no.
uLP 2 mm 2 blau 040126
uLP 5 mm 5 grau 040128
Washer A2
uLS
Norm d in mm item no.
uLS 8,4 x 16 DIN 125/A2 16 040129
uLS 10,5 x 30 DIN 9021/A2 30 040130
uLS 8,4 x 24 DIN 9021/A2 24 040131
sw
d
d
CREO
FIx
4 8
SMALL PARTS
V2A slot nut with spring ball, M8 for C slot,suitable for ALuVER, CREODuR, CREOFLEx
CSN2
a in mm b in mm c in mm item no.
30 13 9 040134
Aluminium slot nut with spring ball, M8 for C slot,suitable for ALuVER Standard, ALuVER Premium and CREOFLEx
CSN3
a in mm b in mm c in mm item no.
22 13 10 040135
Fixing anchor
FA
d in mm l in mm item no.
W-FA M10/15/90 A4 10 90 040132
W-FA M10/45/120 A4 10 120 040133
a
c
b
a
c
b
SMALL PARTS
Protective matting on roll, surface area: 12,5 m² (1,25 x 10 m)material thickness: 6 mm weight: approx. 56 kg
Ru BS12,5
Protective matting surface area: 2,645 m² (1,15 x 2,30 m)material thickness: 6 mm weight: approx. 9,5 kg
Ru BS2
item no.
040138
item no.
040137
Flat aluminium strip for lateral stabilisation of CREOFLEx systems25 x 4 x 1800 mm with 9.0 mm hole on one end
AFB
a in mm b in mm s in mm item no.
1800 25 4 040145
a
b
a
b
CREO
FIx
5 0
SMALL PARTS
Tool for cordless screw drivers, catches 8 mm hexagon heads,with spring ring to fix screw, ¼“ drive
BIT-8 F
item no.
040136
CREO
TERR
A
5 2
It is important for ground-mounted systems to have a stable foundation. At
Creotecc we developed a system to fulfill the requirements of a wide variety
of locations: CREOTERRA. This ground mounting system is suitable for all com-
mon module types, framed or unframed, thanks to its stable design with a secure
foundation. The partially pre-assembled substructure and the proven ALuTEC
and ALUTEC FL insertion systems significantly reduce the mounting time. It goes
without saying that only high-quality materials are used in the manufacture of all
our products. With CREOTERRA you install fast and safe.
The service we offer you does not end at the finished product. As a RAL-certified
company we aim to provide you with assistance in all technical and logistical
matters. For example, we can prepare the entire manufacture and packaging for
you or calculate specific statics related to your project. If you require a custom-
tailored design or an affordable standard system, you will find the right solution
for any size with our proven modular system of products.
GROuND MOuNTING SYSTEM FOR ALL COMMON MODuLE TYPES
TECHNOLOGY
GENTLE MODuLE INSTALLATION
MODuLE INSERTION SYSTEM
Are you looking for a secure foundation for your photovoltaic system? Do you
want to quickly install the system without exposing the modules to mechanical
stress? Then our original module insertion system is the solution you’re look-
ing for. No need for clamping on the modules, no tedious screwing and drilling
operations required. Inserting the modules is fast, easy, and secure. You can
protect the photovoltaic systems against all kinds of damage in this manner.
Our insertion system is a guarantee that you can set up your system quickly
and aff ordably, no matter whether you have framed or unframed modules, a
pitched roof, a fl at roof, or a ground-mounted system.
54
MODuLE INSERTION SYSTEM uSING BACK RAILS
An insertion system is also available using back rails, which are brackets glued
on the back of the modules. Back rails are the best mounting solution for large-
scale glass-glass laminates. We develop proprietary solutions for implementa-
tion in module production in this area, too. We adapt concepts supplied by vari-
ous module manufacturers and deliver systems that can be directly implemented
for modules already on the market. Our product range includes everything from
entirely invisible mounting systems to profi les that protect every corner and en-
sure optimal anti-slip protection. The bigger the module, the more important it is
to use proven mounting systems. We guarantee that each and every format will
be held in place stably and safely.
MODuLE CLAMPING SYSTEM
Our clamping systems provide you with a safe and durable mounting alternative
for framed modules. They make installation especially convenient: the module
clamps are pre-mounted. The threaded plates are fastened with an integrated
screw locking material. All you need to do is insert the threaded plate on the
module clamp into the profi le groove, place the clamp onto the module frame,
rotate the threaded plate 90°, and screw it onto the solar module. It’s as easy as
that! The clamping system is available for all framed photovoltaic modules and
suitable for all frame heights. All components are made of corrosion-resistant
aluminium or stainless steel.
GENERAL TERMS AND CONDITIONS OF SALEAND DELIVERY OF CREOTECC GMBH
I. GENERAL POINTS
1. Exclusively our terms and conditions as set out below shall apply for all our
quotations, sales, supplies and work, including installation, repairs, servic-
ing, advice and other contractual performances.
2. The customer’s terms and conditions of purchase shall be binding on us
provided we explicitly acknowledge them in writing.
3. Differing agreements, incidental agreements, assurances and other un-
dertakings by our representatives and employees shall only be effective
provided we confirm these in writing.
II. SCOPE OF THE DELIVERY COMMITMENT
1. Our quotations shall be without obligation. Orders shall be deemed to have
been accepted only provided we have confirmed them in writing. Our writ-
ten order confirmation shall be authoritative with respect to the content of
the contract.
2. The documents that form part of the quotation, such as illustrations, draw-
ings, dimensions and weight details, shall only be authoritative on an ap-
proximate basis.
3. The quality requirements laid down in the quotation specification shall
comprehensively and conclusively specify the characteristics of the de-
livery item. In particular, public statements made by the manufacturer, its
agents or third parties (e.g. public presentations of product characteristics)
shall contain no descriptions of the delivery item that supplement or alter
this specification.
III. PAYMENT TERMS
1. List prices and quotation prices shall be without obligation. The prices on
the date of delivery shall apply. unless agreed otherwise, our prices shall
be exclusive of packaging and transport costs.
2. Our invoices shall be payable immediately, within 10 days of the invoice
date, unless agreed otherwise in writing. Payments may not be made by
bill of exchange.
3. In the event of default, interest in the amount of the customary interest
rates of major banks for unsecured current account credit facilities will be
charged. The same will apply in the event of postponement of payment.
4. If the purchaser defaults with the payment or if circumstances become
known that call the purchaser’s creditworthiness into question (e.g. appli-
cation for a deferred payment, failure to honour a cheque, application to
institute insolvency proceedings, suspension of payments), all receivables
shall immediately fall due for payment. In that case, we shall be entitled
to defer performance under the contract, inasmuch as it has not yet been
executed in full, until payment in full, and/or only to execute it against pay-
ment in advance or initial collateral. We shall further be entitled to take
back delivered goods at the purchaser’s expense, without automatically
availing ourselves of the right to withdraw from the contract. This shall not
affect any further statutory claims.
5. Claims may only be offset against counterclaims that we have acknowl-
edged or that have been finally and absolutely approved. No rights of re-
tention may be exercised on the basis of counterclaims that we have not
acknowledged.
IV. RESERVATION OF TITLE
1. The goods delivered shall remain our property until settlement of all outstand-
ing receivables arising out of the business relationship, including until cheques
have been honoured.
2. Distributors shall be permitted to sell our reserved goods in their own name
during the normal course of their business. The purchaser hereby assigns to
us the receivables arising out of the resale transaction. We hereby accept
such assignment. In the event of sale of the reserved goods after process-
ing or combination with other goods not belonging to us, the receivables
shall be assigned in the amount of the invoice for our reserved goods. The
purchaser shall only be authorised to collect the assigned receivables for
as long as it duly meets its payment obligations towards us. The purchaser
must reserve ownership with respect to its own customers until they have
paid the purchase price in full.
3. The purchaser shall not be permitted to pledge or transfer ownership of our
reserved goods by way of security. It shall be obliged to immediately inform
us of any access by third parties to the reserved goods. The purchaser
shall not be permitted to agree on prohibitions of assignment. The forego-
ing shall not limit the terms under II. 3. .
V. DELIVERY TERMS, RISK
1. If we are prevented from fulfilling our delivery commitment, through force
majeure, strike or lock-out or unforeseen events, which could not be avoid-
ed despite the expected precautionary measures, irrespective of whether
these arise at our own premises or at the premises of a supplier, for exam-
ple operational problems, transport delays and incorrect and late delivery
by upstream suppliers, then the delivery term shall be extended accord-
ingly, even in the event of pre-existing delivery default. If such events mean
that subsequent delivery becomes impossible or if we cannot reasonably
be expected to deliver, we shall be entitled to fully or partially withdraw
from the contract.
2. Shipment shall be at the purchaser’s risk, even if carriage paid delivery has
been agreed. We accept no liability for damage during shipment. We shall
only contract breakage insurance at the purchaser’s request and subject
to a charge of the insurance premium. We shall only provide a credit note
for any damage provided the insurance company has allowed the claim.
We accept no further obligations. unless explicitly agreed otherwise, our
deliveries shall be shipped uninsured.
3. In the event of delivery default, the Purchaser must allow a reasonable
additional time. In the event of delivery default or of subsequent impossibil-
ity of performance for which we are not responsible, no damages may be
claimed, unless there was intent, or our management or senior executives
committed gross negligence, or if an exclusion of liability is inadmissible
on other grounds.
4. If shipment of the deliveries is delayed at the purchaser’s request by more
than two weeks beyond the agreed delivery date, or, if no precise delivery
date was agreed, after notification of readiness for shipment by the seller,
then the seller may charge a flat rate for storage of 0.5% of the price of
the delivery item, for each month (if applicable on a pro rata temporis ba-
sis), albeit up to a maximum of 5 %. The purchaser may offer proof that the
seller either did not incur loss or else incurred a significantly lower loss.
The seller may offer proof that it incurred a higher loss.
VI. WARRANTY
In the event of defects, including in the event of the absence of guaranteed
characteristics, we shall provide warranty as follows:
1. A complaint on the ground of obvious external defects at the time of delivery
can only be allowed provided it is made in writing immediately, and at the
latest within 6 days following receipt of the goods.
2. In the event of justified complaints, we may elect either to remedy the de-
fect or to deliver faultless replacement goods. The purchaser shall have
a right of withdrawal if, despite having been set a reasonable additional
period to remedy a defect acknowledged by ourselves, we allow this to
expire without effect, through our own fault. In the event of acknowledged
shortfalls, we may either make up the shortfall by delivery or else raise a
credit note accordingly.
3. The warranty shall not cover normal wear and tear, damage due to inap-
propriate or negligent treatment, excessive load, unsuitable operating fa-
cilities and failure to observe operating instructions. The same shall apply
in the event of damage that occurs during alterations or repair work by the
purchaser or by third parties whom we have not called in.
4. We or our legal representatives and vicarious agents accept no liability
for damage that arises under the warranty, owing to breaches of inciden-
tal contractual obligations, incorrect advice, unauthorised act, culpable
breach of the remedy or replacement delivery obligation, or on other legal
grounds, in particular inasmuch as the damage does not occur to the deliv-
ery item itself, unless there was intent, or our management or senior execu-
tives committed gross negligence, or if exclusion of liability is inadmissible
on other grounds. In addition, no damages may be claimed in the event of
the absence of guaranteed performances if the assurance was not specifi-
cally intended to avoid consequential losses due to defects.
VII. GENERAL LIABILITY
1. In the event of intent or gross negligence on the part of the seller or of its
representative or vicarious agent, the seller shall be liable in accordance
with the statutory provisions.
For the rest, the seller shall only be liable under the Produkthaftungsgesetz
[German Product Liability Act] for loss of life, limb or health, or for the culpable
breach of material contractual obligations.
However the damages claim for breach of material contractual obligations
shall be restricted to the foreseeable contractually typical damage.
However, liability for damage caused by the delivery item to the purchaser’s
objects of legal protection, such as damage to other property, shall be en-
tirely excluded, with the exception of liability for intent or gross negligence
or owing to loss of life, limb or health.
2. The rule laid down in the previous paragraph shall also cover damages in
addition to performance and damages in lieu of performance, irrespective
of their legal basis, in particular owing to defects, the breach of obligations
arising out of the contractual relationship or due to an unauthorised act. It
shall also apply to the claim for reimbursement of wasted expenditure.
3. In the event of delay in performance in instances of intent or gross negli-
gence on the part of the seller or of its representative or vicarious agent,
the seller shall be liable in accordance with the statutory provisions. In
other circumstances in which performance is delayed, the seller’s liability
for damages in addition to performance and for damages in lieu of per-
formance shall be limited to 3 % per week, up to a maximum of 15 % of the
value of the delivery. The purchaser may make no further claims, even after
expiry of any time limit for performance given to the seller. The above limit
shall not apply to liability for loss of life, limb or health.
4. Inasmuch as delivery is impossible, the purchaser shall be entitled to claim
damages in accordance with statutory provisions. However, the purchas-
er’s claim for damages in addition to performance or damages in lieu of
performance, and for the reimbursement of wasted expenditure, shall be
limited to 10 % of the value of that proportion of the delivery that cannot
be used as a result of the inability to deliver. The purchaser may make no
further claims owing to inability to deliver. This restriction shall not apply if
there is liability in instances of intent, gross negligence or owing to loss of
life, limb or health.
5. The purchaser may only make recourse claims against the seller pursu-
ant to § 478 BGB [German Civil Code] inasmuch as the purchaser has not
concluded any agreements with its own customer beyond those relating to
statutory defect claims.
6. a.The period of limitation for damages claims owing to defects, irrespective
of their legal basis, shall be one year.
b. The period of limitation shall also apply to other damages claims against
the seller, irrespective of their legal basis. They shall also apply inasmuch
as the claims are not associated with a defect.
c. The above period of limitation shall apply subject to the following proviso:
The period of limitation shall not apply in the event of intent; For the rest,
the period of limitation shall not apply if the seller has fraudulently failed
to disclose a defect.
Furthermore, the period of limitation shall not apply in cases of loss of
life, limb, health or freedom, in the event of product liability claims, grossly
negligent breach of obligation, or in the event of culpable breach of
fundamental contractual obligations.
d. The period of limitation in relation to all damages claims shall commence
upon delivery.
e. Where reference to damages claims is made in this provision, this shall include
claims for reimbursement of wasted expenditure.
VIII. PRICES
1. unless stated otherwise, all prices shall be net of value added tax at the
statutory rate, packaging and transport from the factory/warehouse.
2. We reserve the right to apply price changes without prior notification of the
purchaser. The seller reserves the right to apply price adjustments due to
errors and on invoices, and also on price lists, delivery notes, order confir-
mations and quotations.
Ix. PLACE OF PERFORMANCE
1. The place of performance for all obligations arising out of the contractual re-
lationship shall be Freiburg.
2. The place of jurisdiction for all disputes arising out of the contractual re-
lationship, including complaints relating to bills of exchange and cheques,
shall be Freiburg. We may also elect to sue the purchaser at the court hav-
ing jurisdiction for its registered office.
3. Business relationship is the law of Federal Republic of Germany excluding
the uN sales law.
Creotecc GmbH / Munzinger Strasse 1 / 79111 Freiburg / Germany
Phone: +49 761 21686-0 / Fax: +49 761 21686-29
www.creotecc.com
Creotecc GmbH, located in Freiburg i. Br., Germany
Managing director: ulrich Bartmann, Wolfgang Gross
Trial court Freiburg HRB 701074, VAT: DE 254 556 572
CREOTECC GMBH Munzinger Strasse 1 | 79111 FreiburgPhone: +49 761 21686-0 | Fax: +49 761 [email protected] | www.creotecc.com
www.creotecc.com