Embed Size (px)
Citation preview
1Subject to change without notice.www.cree.com/ledlamps
App
licat
ion
Not
e: C
LD-C
TAP0
1.00
6
Cree® LED Lamp Reliability Test Standardcriteria for performing LED Reliability Tests
This application note applies to the following High-brightness-LED products:
• Oval and round LEDs• P4 LEDs• Surface-mount PLCC LEDs
For XLamp LED reliability information, refer to the XLamp LED Reliability Application Note(CLD-AP06).
Contents
1. P2 RGB LED Lamps................................................................................................................22. P2 White LED Lamps..............................................................................................................33. P4 RGB LED Lamps................................................................................................................44. P4 White LED Lamps..............................................................................................................55. SMD CLV1A-FKB & CLM1 series LED Lamps....................................................................................66.SMD CLA1A,CLA1B,CLA2A and SP301 series LED Lamps..............................................................77.SMD CLM2(except for CLM2C/CLM2D/CLM2T series) and CLM4 series LED Lamps..................................88. SMD CLM2C-ACA/RCA LED Lamps...............................................................................................99.SMD CLM2C-GCA/BCA LED Lamps ..........................................................................................1010.CLM2D/T-RPC/RCC/APC/ACC………………………………………………….....................................................1111.CLM2D/T-GPC/GCC/BPC/BCC/CPC/CCC……..............................................…………….…………...……..1212. SMD CLM3 series LED Lamps...............................................................................................1313.SMD CLM3 white LED Lamps................................................................................................1414. CLMXB series…………………………………………...........................................………………….....................1515. SMD CLVBA-FKA LED Lamps..................................................................................................1616. SMD CLMV & CLMU series LED Lamps.........................................................................................1717.SMD CLX6 series(CLX6A/B/C/D/F) LED Lamps...........................................................................1818.SMD CLX6E series LED Lamps..............................................................................................1919.CLX6F-RKB/AKB………………………………………………........................................................................2020.CLX6F-GKB………………………………………………...............................................................................2121.CLX6F-BKB........…………………………………........................................................................……..……2222.CLX6F-PKW........…………………………………........................................................................……..……2323.SMD CLV1S and CLV1L LED Lamps..........................................................................................2424. SMD CLY6 series(CLY6C/D/L, CLYBA/CLYBB) LED Lamps............................................................2525.SMD LS6 series LED Lamps.................................................................................................2626.SMD LQ6 RGBW LED Lamps.................................................................................................2727.SMD LQ6 RGBA LED Lamps.................................................................................................2828.SMD LR6 series LED Lamps.................................................................................................2929.SMD UHD1110 series LED Lamps............................................................................................30
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
2 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
1. P2 RGB LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 1000 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 1000 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 1000 hrs 0/50
Solder ability JEITA ED-4701 300 303
Tsol=245(±5)°C,3sec(usingflux)
1time (over95%) 0/50
Resistance to Soldering Heat JEITA ED-4701 300 302
Tsol=260(±5)°C,10sec (3mm from the base of the epoxy bulb) 1time 0/50
Ope
ratio
n se
quen
ce Life Test -TA=25°C
Oval: IF=35mA(G/B), IF=50mA(R/A)Round: IF=30mA(G/B),IF=50mA(R/A)
1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C RH=90%, IF=20mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°CIF=20mA 1000hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 100μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
3 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
2. P2 White LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 1000 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 1000 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 1000 hrs 0/50
Solder ability JEITA ED-4701 300 303
Tsol=245(±5)°C,3sec(usingflux)
1time (over95%) 0/50
Resistance to Soldering Heat JEITA ED-4701 300 302
Tsol=260(±5)°C,10sec (3mm from the base of the epoxy bulb) 1time 0/50
Ope
ratio
n se
quen
ce Life Test - TA=25°C, IF=30mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C RH=90%, IF=20mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF=20mA 1000hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 100μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
4 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
3. P4 RGB LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 1000 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 1000 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 1000 hrs 0/50
Solder ability JEITA ED-4701 300 303
Tsol=245(±5)°C,3sec(usingflux)
1time (over95%) 0/50
Resistance to Soldering Heat JEITA ED-4701 300 302
Tsol=260(±5)°C,10sec (3mm from the base of the epoxy bulb) 1time 0/50
Ope
ratio
n se
quen
ce Life Test - TA=25°CIF=30mA(G/B), IF=70mA(R/A) 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C RH=90%, IF=20mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF=30mA 1000hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 30 mA – Initial Data x 1.2
Reverse Current IR VR = 5 V - 100μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
5 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
4. P4 White LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 1000 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 1000 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 1000 hrs 0/50
Solder ability JEITA ED-4701 300 303
Tsol=245(±5)°C,3sec(usingflux)
1time (over95%) 0/50
Resistance to Soldering Heat JEITA ED-4701 300 302
Tsol=260(±5)°C,10sec (3mm from the base of the epoxy bulb) 1time 0/50
Ope
ratio
n se
quen
ce Life Test - TA=25°C, IF=35mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C RH=90%, IF=20mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF=30mA 1000hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 30 mA – Initial Data x 1.2
Reverse Current IR VR = 5 V - 100μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
6 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
5. SMD CLV1A-FKB & CLM1 series LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=50mA, G=25mA, B=25mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF(single chip):R=30mA,G=15mA, B=15mAIF(RGB): R=15mA, G=15mA, B=15mA
1000 hrs 0/50
High Humidity Heat Life Test -TA=60°C, RH=90%
IF(single chip):R=30mA,G=15mA, B=15mAIF(RGB): R=15mA, G=15mA, B=15mA
500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R=50mA, G=25mA . B=25mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
7 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
6. SMD CLA1A,CLA1B,CLA2A and SP301 series LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF=35mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF=35mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
8 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
7. SMD CLM2(except for CLM2C/CLM2D/CLM2T series) and CLM4 series LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=70mA, G=30mA, B=30mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: R=50mA, G=15mA, B=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: R=50mA, G=15mA, B=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R=70mA, G=30mA, B=30mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
9 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
8. SMD CLM2C-ACA/RCA LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF=50mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF=50mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
10 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
9. SMD CLM2C-GCA/BCA LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: G=35mA, B=20mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: G=10mA, B=10mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: G=15mA, B=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: G=35mA, B=20mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
11 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
10. SMD CLM2D/T-RPC/RCC/APC/ACC LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF=50mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF=50mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
12 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
11. SMD CLM2D/T-GPC/GCC/BPC/BCC/CPC/CCC LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: G=35mA, B=20mA, C=35mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: G=10mA, B=10mA, C=10mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: G=15mA, B=15mA, C=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: G=35mA, B=20mA, C=35mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
13 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
12. SMD CLM3 series LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=50mA, G=25mA, B=25mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: R=30mA, G=15mA, B=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: R=30mA, G=15mA, B=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R=50mA, G=25mA, B=25mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
14 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
13. SMD CLM3 white LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF=25mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF=25mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
15 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
14. SMD CLMXB series LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Water Proof Test# IEC 60529:2011 IPX8 Immersing in 1m water 24 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=20mA, G=25mA, B=15mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF=10mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF= 10mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R=20mA, G=25mA, B=15mA 500hrs 0/50
#Water proof test: The test is conducted on component level. It is strongly recommended customer test the product for their application
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
16 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
15. SMD CLVBA-FKA LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=18mA, G=16mA, B=10mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: R=12mA, G=10mA, B=6mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: R=12mA, G=10mA, B=6mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R=18mA, G=16mA, B=10mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
17 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
16. SMD CLMV & CLMU series LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=12mA, G=6mA, B=3mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: R=5mA, G=3mA, B=3mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: R=5mA, G=3mA, B=3mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R=12mA, G=6mA, B=3mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
18 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
17. SMD CLX6 series(CLX6A/B/C/D/F) LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Water Proof Test# IEC 60529:2011 IPX8 Immersing in 1m water 24 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=30mA, G=35mA, B=20mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R=30mA, G=35mA, B=20mA 500hrs 0/50
#Water proof test: The test is conducted on component level. It is strongly recommended customer test the product for their application
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
19 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
18. SMD CLX6E series LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Water Proof Test# IEC 60529:2011 IPX8 Immersing in 1m water 24 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=30mA, G=30mA, B=20mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R=30mA, G=30mA, B=20mA 500hrs 0/50
#Water proof test: The test is conducted on component level. It is strongly recommended customer test the product for their application
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
20 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
19. SMD CLX6F-RKB/AKB LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Water Proof Test# IEC 60529:2011 IPX8 Immersing in 1m water 24 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R1=R2=R3=30mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: R1=R2=R3=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: R1=R2=R3=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R1=R2=R3=30mA 500hrs 0/50
#Water proof test: The test is conducted on component level. It is strongly recommended customer test the product for their application
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
21 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
20. SMD CLX6F-GKB LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Water Proof Test# IEC 60529:2011 IPX8 Immersing in 1m water 24 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: G1=G2=G3=35mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: G1=G2=G3=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: G1=G2=G3=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: G1=G2=G3=35mA 500hrs 0/50
#Water proof test: The test is conducted on component level. It is strongly recommended customer test the product for their application
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
22 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
21. SMD CLX6F-BKB LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Water Proof Test# IEC 60529:2011 IPX8 Immersing in 1m water 24 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: B1=B2=B3=20mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: B1=B2=B3=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: B1=B2=B3=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: B1=B2=B3=20mA 500hrs 0/50
#Water proof test: The test is conducted on component level. It is strongly recommended customer test the product for their application
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
23 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
22. SMD CLX6F-PKW LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: B1=B2=B3=30mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: B1=B2=B3=15mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: B1=B2=B3=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°CIF: B1=B2=B3=30mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
24 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
23. SMD CLV1S and CLV1L LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=25mA, G=20mA, B=20mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: R=10mA, G=8mA, B=8mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: R=10mA, G=8mA, B=8mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R=25mA, G=20mA, B=20mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
25 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
24. SMD CLY6 series(CLY6C/D/L, CLYBA/CLYBB) LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Water Proof Test# IEC 60529:2011 IPX8 Immersing in 1m water 24 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=30mA G=35mA B=20mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: R=15mA G=15mA B=10mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF=15mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R=30mA G=35mA B=20mA 500hrs 0/50
#Water proof test: The test is conducted on component level. It is strongly recommended customer test the product for their application
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
26 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
25. SMD LS6 series LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Water Proof Test# IEC 60529:2011 IPX8 Immersing in 1m water 24 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=14mA G=12mA B=16mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: R=7mA G=7mA B=5mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF : R=7mA G=7mA B=5mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°C, IF: R=14mA G=12mA B=16mA 500hrs 0/50
#Water proof test: The test is conducted on component level. It is strongly recommended customer test the product for their application
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
27 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
26. SMD LQ6 RGBW LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=G=B=W=150mA 1000 hrs 0/30
High Temperature Life Test - TA=85°C IF: R=G=B=W=80mA 1000 hrs 0/30
High Humidity Heat Life Test - TA=60°C, RH=90%IF: R=G=B=W=80mA 500 hrs 0/30
Low Temperature Life Test - TA=-40°CIF: R=G=B=W=150mA 500hrs 0/30
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
28 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
27. SMD LQ6 RGBA LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=G=B=A=150mA 1000 hrs 0/30
High Temperature Life Test - TA=85°C IF: R=G=B=A=80mA 1000 hrs 0/30
High Humidity Heat Life Test - TA=60°C, RH=90%IF: R=G=B=A=80mA 500 hrs 0/30
Low Temperature Life Test - TA=-40°CIF: R=G=B=A=150mA 500hrs 0/30
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
29 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
28. SMD LR6 LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=G=B=W=50mA 1000 hrs 0/30
High Temperature Life Test - TA=85°C IF: R=G=B=W=50mA 1000 hrs 0/30
High Humidity Heat Life Test - TA=60°C, RH=90%IF: R=G=B=W=50mA 500 hrs 0/30
Low Temperature Life Test - TA=-40°CIF: R=G=B=W=50mA 500hrs 0/30
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 20 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 -
Copyright © 2007-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
30 CLD-CTAP01.006
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
www.cree.com/ledlamps
29. SMD UHD1110 LED Lamps
Test Items and Results
Type Test Item REF.Standard Test Condition Note Number ofDamaged
Envi
ronm
enta
l seq
uenc
e
Temperature Cycle JEITA ED-4701 100 105
-40°C~25°C~100°C~25°C30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50
Thermal Shock MIL-STD-202G -40°C~100°C30 mins, 30 mins 100 cycles 0/50
High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/50
Humidity Heat Storage JEITA ED-4701 100 103
TA=60°CRH=90% 500 hrs 0/50
Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/50
Ope
ratio
n se
quen
ce
Life Test - TA=25°CIF: R=G=B=10mA 1000 hrs 0/50
High Temperature Life Test - TA=85°C IF: R=G=B=3mA 1000 hrs 0/50
High Humidity Heat Life Test - TA=60°C, RH=90%IF: R=G=B=3mA 500 hrs 0/50
Low Temperature Life Test - TA=-40°CIF: R=G=B=10mA 500hrs 0/50
Judging Criteria
Item Symbol Test ConditionCriteria for Judgment
Min. Max.
Forward Voltage VF IF = 5 mA – Initial Data x 1.1
Reverse Current IR VR = 5 V - 10μA
Luminous Flux/Intensity ФV IF = 5 mA Initial Data x 0.7 -
