CREATE YOUR STYLE MINI PROJECTS CRYSTAL PEARLSGEm PEARL CUff BRACELET ... STEP 2: Repeat the above step using the Swarovski Bead art. 5328 8 mm Turquoise AB, but only use 4 Beads in

WWW.CREATE-YOUR-STYLE.COM

CREATE YOUR STYLEMINI PROJECTS

GEMCOLORS CRYSTAL PEARLS

Materials

SwAROvSki ELEmEnTS

Product Group Article No. Amount Size Color Color Code

Beads 5000 4 pcs. 6 mm Turquoise AB 267 AB

Beads 5000 40 pcs. 8 mm Turquoise AB 267 AB

Crystal Pearls 5810 28 pcs. 6 mm Crystal Coral Pearl 001 816

Crystal Pearls 5810 28 pcs. 6 mm Crystal Pink Coral Pearl 001 716

Crystal Pearls 5810 28 pcs. 6 mm Crystal Red Coral Pearl 001 718

ARizOnA GEm PEARL

CUff BRACELET

mini PROjECT “CRYSTAL PEARLS GEmCOLORS”


Supplies: 10 Balled Head Pins Beadalon 312B-253 5 8” coils of Remembrance Memory Wire Beadalon JMBT-0.25Z 3 5 Strand Bone Spacer Beads

Instructions

STEP 1: Turn a simple loop onto one end of one of the 8” coils of Remembrance Memory Wire. String on 5 of the Crystal Pearls art. 5810 6 mm Crystal Pink Coral Pearl, one of the 5 Strand Bone Spacers using the bottom hole, 8 more Crystal Pearls, another Bone Spacer using the bottom hole, 8 more Crystal Pearls, the third Bone Spacer using the bottom hole and 5 more Crystal Pearls. Trim wire if necessary using memory wire cutters to 1/2” and turn a simple loop.

STEP 2: Repeat the above step using the Swarovski Bead art. 5328 8 mm Turquoise AB, but only use 4 Beads in the first and last sections and 6 Beads in the middle two sections to create the second row of the bracelet.

STEP 3: Repeat step 1 using the Crystal Red Coral Pearls to create the third row of the bracelet.

STEP 4: Repeat step 2 using the remaining Beads art. 5000 8 mm Turquoise AB to create the fourth row of the bracelet.

STEP 5: Repeat step 1 again using the Crystal Coral Pearls to create the fifth row of the bracelet.

STEP 6: String one of the remaining Crystal Pearls and Beads onto each of the Balled Head Pins. Trim to ½” and turn a simple loop.

STEP 7: Attach one to each end of the bracelet at the end of the corresponding Crystal Pearl or Bead color.

Materials

SwAROvSki ELEmEnTS


Beads 5000 8 pcs. 8 mm Turquoise 267



Crystal Pearls 5811 1 pc. 10 mm Crystal Turquoise Pearl 001 709

Crystal Pearls 5811 2 pcs. 12 mm Crystal Turquoise Pearl 001 709


TURqUOiSEChAin nECkLACE



Supplies: 27” medium link silver plated chain 5 2” eye pins in nickel Tierracast 01-0027-0

Instructions

STEP 1: Cut chain into the following lengths: one – 11 ½” piece, three – 3 ½” pieces, one 5” piece. Set aside.

STEP 2: On one of the eye pins string on one Bead art. 5328 6 mm Turquoise, one Bead art. 5000 8 mm Turquoise, one Crystal Pearl 16 mm Crystal Turquoise Pearl, one Bead art. 5000 8 mm Turquoise and one Bead art. 5328 6 mm Turquoise. Turn a simple loop on end of eye pin. Repeat this step one more time.

STEP 3: On another eye pin, string on one Bead art. 5000 8 mm, one Crystal Pearl 12 mm Crystal Turquoise Pearl and one Bead art. 5000 8 mm. Trim eye pin to 1/2” of last Bead if necessary and turn a simple loop. Repeat this step one more time.

Continuation on next page


“Turquoise – Chain Necklace”, page 2

STEP 4: One the last headpin, string on one Bead art. 5328 4 mm Turquoise, one Bead art. 5328 6 mm Turquoise, one Crystal Pearl 10 mm Crystal Turquoise Pearl, one Bead art. 5328 6 mm Turquoise and one Bead art. 5328 4 mm Turquoise. Trim the eye pin to ½” if necessary and turn a simple loop.

STEP 5: Attach one of the beaded eye pins from step 2 to one end of a 3 ½” chain and the other end to one end of the 11 ½” chain.

STEP 6: On the other end of the 11 ½” chain attach one of the beaded eye pins from step 3. Attach the other end of this eye pin to another 3 ½” piece of chain.

STEP 7: On the other end of the 3 ½” chain from step 6 attach the other beaded eye pin from step 2 and on the other end of this beaded eye pin attach one end of the 5” piece of chain.

STEP 8: On the other end of the 5” piece of chain attach the other beaded eye pin from step 3 and on the other end of this eye pin attach another 3 ½” piece of chain.

STEP 9: On the end of this chain attach the beaded eye pin from step 4. Attach the other end of this eye pin to the 3 ½” piece of loose chain from step 5.

Materials

SwAROvSki ELEmEnTS


Strand 1

Beads 5328 28 pcs. 4 mm Dark indigo 288




Crystal Pearls 5810 40 pcs. 6 mm Crystal Dark Lapis Pearl 001 719




Strand 2

Beads 5000 12 pcs. 8 mm Capri Blue 243

Beads 5040 22 pcs. 6 mm Caribbean Blue Opal 394

Beads 5328 25 pcs. 4 mm Caribbean Blue Opal AB 394AB

Beads 5328 12 pcs. 6 mm Caribbean Blue Opal 394

Crystal Pearls 5810 30 pcs. 6 mm Crystal Lapis Pearl 001 717






3 ShADES Of BLUE

nESTED nECkLACE



STEP 1: Cut 40” of stringing wire. Slide on one crimp bead and string through an end loop on one of the Trinity Links. Slide the wire back through the crimp bead, crimp tightly cut excess wire and attach the crimp cover. (You should only use about 1” of wire to do this so you have enough wire to string the Beads and crimp the other end.)

STEP 2: String the Beads Dark Indigo and Crystal Dark Lapis Pearls strand in the following pattern: 2a.) Eight Beads art. 5328 4 mm, two Crystal Pearls art. 5810 6 mm. 2b.) One Bead art. 5328 8 mm, two Crystal Pearls art. 5810 6 mm, one Bead art. 5328 4 mm, two Crystal Pearls art. 5810 6 mm, one Bead art. 5540 12 mm, one Crystal Pearl art. 5810 8 mm, one Bead art. 5540 12 mm, two Crystal Pearls art. 5810 6 mm, one Bead art. 5328 8 mm, one Crystal Pearl art. 5810 8 mm, one Bead art. 5328 8 mm, one Crystal Pearl art. 5811 14 mm, one Bead art. 5328 8 mm, one Crystal Pearl art. 5810 8 mm, one Bead art. 5328 8 mm, two Crystal Pearls art. 5810 6 mm, one Bead art. 5540 17 mm, one Crystal Pearl art. 5810 10 mm, one Bead art. 5540 17 mm, one Crystal Pearl art. 5810 6 mm, two Beads art. 5328 4 mm, one Crystal Pearl art. 5810 10 mm. 2c.) Reverse the pattern in Step 2b omitting the Crystal Pearl art. 5810 10 mm.

STEP 3: Reverse the entire pattern for strand 1 beginning with two Crystal Pearls art. 5810 6 mm.

STEP 4: Repeat the crimping process from step 1 on the other side of the strand using the outside loop of the other Trinity link.

Instructions Strand 1

Supplies: 2 antique silver Trinity links Tierracast 94-3004-12 2 silver jump rings Tierracast 01-0025-01 110” Beadalon 49 strand stringing wire 6 sterling silver crimp beads Tierracast 01-0030-01 1 medium silver lobster clasp 6 sterling silver crimp covers Tierracast 01-0032-01

Materials

SwAROvSki ELEmEnTS


Strand 3







Crystal Large hole Pearls 5811 3 pcs. 16 mm Crystal Turquoise Pearl 001 709

“3 Shades of Blue – Nested Necklace”, page 2



STEP 5: Cut a 36” piece of stringing wire. Repeat crimping process from step 1 using the center loop of the Trinity Link. String the Beads Caribbean Blue Opal, Capri Blue and Lapis Crystal Pearl in the following pattern: 5a.) Seven Beads art. 5328 4 mm 5b) three Crystal Pearls art. 5810 6 mm, two Beads art. 5040 6 mm, one Crystal Pearl art. 5810 10 mm, two Beads art. 5040 6 mm, two Crystal Pearls art. 5810 6 mm, one Bead art. 5328 4 mm, one Crystal Pearl art. 5840 8 mm, one Bead art. 5328 4 mm, two Crystal Pearls art. 5810 6 mm, one Bead art. 5000 8 mm, one Bead art. 5328 6 mm, one Crystal Pearl art. 5840 12 mm, one Bead art. 5328 6 mm, one Bead art. 5000 8 mm, one Crystal Pearl art. 5810 10 mm, one Bead art. 5040 6 mm, two Crystal Pearls art. 5810 10 mm. 5c.) Reverse pattern in step 5b, starting with only one Crystal Pearl art. 5810 10 mm and ending with just two Crystal Pearls art. 5810 6 mm. 5d.) String on one Bead art. 5328 4 mm, one Crystal Pearl art. 5840 8 mm, one Bead art. 5328 4 mm, two Crystal Pearls art. 5810 6 mm, one Bead art. 5000 8 mm, one Bead art. 5328 6 mm, one Crystal Pearl art. 5840 12 mm, one Bead art. 5328 6 mm, one Bead art. 5000 8 mm, one Crystal Pearl art. 5810 10 mm, one Bead art. 5040 6 mm, and two Crystal Pearls art. 5810 10 mm. 5e.) Reverse the entire pattern for strand 2 beginning with only one Crystal Pearl art. 5810 10 mm. Repeat the crimping process on the other side of strand 2 using the center loop in the other Trinity Link.

STEP 6: Use the remaining piece of stringing wire. Repeat crimping process from step 1 using the last loop of the Trinity Link. String the Swarovski Beads Turquoise and Crystal Pearls Crystal Turquoise in the following pattern: 6a.) Six Beads art. 5328 4 mm, three Crystal Pearls art. 5810 6 mm. 6b.) One Bead art. 5000 8 mm, one Crystal Pearl art. 5810 6 mm, one Crystal Pearl art. 2810 10 mm, one Bead art. 5328 6 mm, one Bead art. 5328 4 mm, one Bead art. 5000 8 mm, one Bead art. 5328 4 mm, one Bead art. 5328 6 mm, three Crystal Pearls art. 5810 6 mm, one Bead art. 5000 8 mm, one Crystal Pearl art. 5810 12 mm, one Bead art. 5000 8 mm, three Crystal Pearls art. 5810 6 mm, one Bead art. 5328 6 mm, one Bead art. 5328 4 mm, one Bead art. 5000 8 mm, one Bead art. 5328 4 mm, one Bead art. 5328 6 mm, one Crystal Pearl art. 5810 10 mm, one Crystal Pearl art. 5810 6 mm, one Bead art. 5000 8 mm, one Crystal Pearl art. 5811 16 mm. 6c.) Reverse the pattern in step 6b omitting the Crystal Pearl art. 5811 16 mm. 6d.) Add one Crystal Pearl art. 5811 16 mm and reverse the entire pattern for strand 3 beginning with one Bead art. 5000 8 mm. Repeat the crimping process on the other side of strand 3 using the last loop in the other Trinity Link.

STEP 7: Open a jump ring and attach to the loop in one of the Trinity Links and to lobster clasp. Close jump ring securely. Open the second jump ring and attach to the other Trinity Link and close securely.



“3 Shades of Blue – Nested Necklace”, page 3

Materials

SwAROvSki ELEmEnTS


Beads 5000 4 pcs. 10 mm Rose Peach 262

Beads 5328 10 pcs. 6 mm Rose Peach 262



Crystal Pearls 5810 20 pcs. 10 mm Crystal Pink Coral Pearl 001 716


CORALS nECkLACE



Supplies: 34” Beadalon 49 Strand Stringing Wire 2 sterling silver crimp beads Tierracast 01-0030-01 1 Leaf Hook & Eye – Tierracast 94-6109-12 2 sterling slver srimp sovers Tierracast 01-0032-01

Instructions

STEP 1: Slide on one crimp bead and string through the loop on one of the Leaf Hook & Eye. Slide the wire back through the crimp bead, crimp tightly, cut excess wire and attach the crimp cover. (You should only use about 1” of wire to do this so you have enough wire to string the beads and crimp the other end.)

STEP 2: String on one Crystal Pearl art. 5810 4 mm Crystal Red Coral Pearl, three Crystal Pearls art. 5810 8 mm Crystal Coral Pearls, one Crystal Pearl art. 5810 4 mm Crystal Red Coral Pearl, two Crystal Pearls art. 5810 10 mm Crystal Pink Coral Pearl, one Bead art. 5328 6 mm Rose Peach, one Crystal Pearl art. 5811 14 mm Crystal Coral Pearl, one Bead art. 5328 6 mm Rose Peach, two Crystal Pearls art. 5810 10 mm Crystal Pink Coral Pearl, one Crystal Pearl art. 5810 4 mm Crystal Red Coral Pearl, three Crystal Pearls art. 5810 8 mm Crystal Coral Pearl, one Crystal Pearl art. 5810 4 mm Crystal Red Coral Pearl, one Bead art. 5000 10 mm Rose Peach.

STEP 3: Repeat the above pattern four times, but on the last repetition omit the Bead art. 5000 10 mm Rose Peach.

STEP 4: Repeat crimping process on the other end of wire using the other end of the Leaf Hook & Eye.

Materials

SwAROvSki ELEmEnTS


fancy Stones 4139 1 pc. 30 mm marbled Black 653

Beads 5000 6 pcs. 6 mm marbled Black 653

Beads 5000 2 pcs. 10 mm marbled Black 653

Crystal Pearls 5810 2 pcs. 6 mm Crystal ivory Pearl 001 708

Crystal Pearls 5810 3 pcs. 6 mm Crystal mystic Black Pearl 001 335







Pendants 6039 1 pc. 25 mm jet 280

EBOnY AnD ivORY PEnDAnT nECkLACE



Supplies: 1 5/8” Anna’s Toggle Clasp silver plated Tierracast 94-6157-12 42” 20 Gauge silver wire 2 silver plated jump rings Tierracast 01-0026-01



“Ebony and Ivory – Pendant Necklace”, page 2

Instructions

STEP 1: Cut five ¾” pieces of wire, five 1” pieces of wire, six 1 ¼” pieces of wire, four 1 ½” pieces of wire.

STEP 2: Turn a simple loop on a ¾” piece of wire and attach to one of the jump rings before closing the loop completely. Add one Beads art. 5000 6 mm Marbled Black and turn a simple loop on the other side. Repeat this step with one Crystal Pearl art. 5810 6 mm Crystal Mystic Black Pearl attaching one end of it to the looped Bead Marbled Black.

STEP 3: Turn a simple loop on a 1” piece of wire and add an Crystal Pearl art. 5810 8 mm Crystal Mystic Black Pearl. Turn a simple loop on the other end and attach to the loose end of the looped Crystal Pearl art. 5810 6 mm Crystal Mystic Black Pearl from step 2 before closing the loop completely.

STEP 4: Turn a simple loop on a 1 ¼” piece of wire and add a Crystal Pearl art. 5810 10 mm Crystal Mystic Black Pearl. Turn a simple loop and attach to the looped Crystal Pearl from step 3 in the same manner. Repeat this step with a 1 ½” piece of wire and the Crystal Pearl 14 mm Crystal Mystic Black Pearl.

STEP 5: Repeat this process to attach the Swarovski Beads in the following order: art. 5000 6 mm, art. 5000 10 mm, art. 5000 6 mm, 5811 14 mm, 5810 10 mm, 5810 8 mm, 5810 6mm.

STEP 6: Repeat the entire process for the other side of the necklace using the Crystal Ivory Pearls in place of the Crystal Mystic Black Pearls. (You will have one 1” piece of wire leftover.)

STEP 7: Cut three 5” pieces (you will use the remaining piece in the last step). Wire wrap one piece through the last looped Crystal Pearl on one of the necklace strands and attach it to the Fancy Stones art. 4139 30 mm Marbled Black. Wrap the wire around the Fancy Stone several times and trim excess wire.

STEP 8: Repeat this step to attach the other necklace strand to the Fancy Stone art. 4139 30 mm leaving approximately 1” between the two wire wraps on the Fancy Stone. (This is the top of the necklace.)

STEP 9: String the last Crystal Pearl art. 5810 8mm Crystal Ivory Pearl onto the last 1” piece of wire and turn simple loops on both sides.

STEP 10: Attach the looped Crystal Pearl from step 9 to the bottom of the Fancy Stone 30 mm using the last 5” piece of wire as was done in steps 7 & 8.

STEP 11: Using the remaining piece of wire, wire wrap the Pendant art. 6039 25 mm Jet to the bottom loop in the Crystal Ivory Pearl that was attached to the necklace in step 10 as was done in step 10.

Materials

SwAROvSki ELEmEnTS




Crystal Pearls 5810 4 pcs. 6 mm Crystal jade Pearl 001 715









EGYPTiAn GEmCOLLAR



Supplies: 2 6 mm TierraCast jump Ring 01-0025-09 120” Beadalon 0.018 stringing wire 8 1” ball head pins 10 2x2 crimp beads 10 3 mm crimp covers 2 5 hole spacer bars 6” of heavy link chain 1 large lobster clasp

STEP 1: Cut one 18“ piece of stringing wire. Secure one end (i.e. tape). String on one Crystal Pearl art. 5810 6 mm Crystal Dark Lapis Pearl, 35 10 mm Crystal Dark Lapis Pearls and one 6 mm Crystal Dark Lapis Pearl. Secure open end. Set aside.

Instructions


“Egyptian Gem Collar”, page 2

STEP 2: Cut one 20“ piece of stringing wire. Secure one end. String on one 6 mm Crystal Turquoise Pearl, 39 10 mm Crystal Turquoise Pearls and one 6 mm Crystal Turquoise Pearl. Secure open end. Set aside.

STEP 3: Cut one 22“ piece of stringing wire. Secure one end. String on one 6 mm Crystal Jade Pearl, 43 10 mm Crystal Jade Pearls and one 6 mm Crystal Jade Pearl. Secure open end. Set aside.

STEP 4: Cut one 24“ piece of stringing wire. Secure one end. String on one 6 mm Crystal Red Coral Pearl, 47 10 mm Crystal Red Coral Pearls and one 6 mm Crystal Red Coral Pearl. Secure open end. Set aside.

STEP 5: Cut one 26“ piece of stringing wire. Secure one end. String on one 6 mm Crystal Ivory Pearl, 51 10 mm Crystal Ivory Pearls and one 6 mm Crystal Ivory Pearl. Secure open end. Set aside.

STEP 6: Using one balled headpin, slip on one 6 mm Crystal Dark Lapis Pearl. Create a simple loop. Repeat once.

STEP 7: Repeat step 6 for 2 6 mm Crystal Turquoise Pearls, 2 6 mm Crystal Jade Pearls, 2 6 mm Crystal Red Coral Pearls and 2 6 mm Crystal Ivory Pearls. Set aside.

STEP 8: Cut the 6“ heavy link chain in half.

STEP 9: Using the strand from step 1, slide one end of the stringing wire into the outside hole of one spacer bar, slide on one 6 mm Crystal Dark Lapis Pearl and crimp to the loop on the wired bead from step 6. Cover crimp with a crimp cover. Repeat this step for the other end of the wire using the corresponding hole on the second spacer bar.

STEP 10: Using the strand from step 2, slide one end of the stringing wire into the 2nd hole on one spacer bar, slide on one 6 mm Crystal Turquoise Pearl and crimp to the loop on a corresponding wired bead from step 7. Cover crimp with a crimp cover. Repeat this step for the other end of the wire using the corresponding hole on the second spacer bar. (Note: the bead strands should be sitting side-by-side.)

STEP 11: Using the strand from step 3, slide one end of the stringing wire into the 3rd hole on one spacer bar, slide on one 6 mm Crystal Jade Pearl and crimp to the last link on one 3“ piece of chain. Cover crimp with a crimp cover. Repeat this step for the other end of the wire using the corresponding hole on the second spacer bar and crimping to the second 3“ piece of chain. (Note: the bead strands should be sitting side-by-side.)

STEP 12: Using the strand from step 4, slide one end of the stringing wire into the 4th hole on one spacer bar, slide on one 6 mm Crystal Red Coral Pearl and crimp to the loop on a corresponding wired bead from step 7. Cover crimp with a crimp cover. Repeat this step for the other end of the wire using the corresponding hole on the second spacer bar. (Note: the bead strands should be sitting side-by-side.)

STEP 13: Using the strand from step 5, slide one end of the stringing wire into the last remaining hole on one spacer bar, slide on one 6 mm Crystal Ivory Pearl and crimp to the loop on a corresponding wired bead from step 7. Cover crimp with a crimp cover. Repeat this step for the other end of the wire using the last remaining hole on the second spacer bar. (Note: the bead strands should be sitting side-by-side.)

STEP 14: Open one jump ring and attach to open end of chain on one side, close jump ring.

STEP 15: Open one jump ring and slip on lobster and attach to open end of chain on the second piece. Close ring.

Materials

SwAROvSki ELEmEnTS


Beads 5000 (Round) 2 pcs. 4 mm Pacific Opal 390

Beads 5040 (Briolette) 2 pcs. 8 mm Crystal metallic Light Gold 2x 001 mLG2

Beads 5328 (XiLiOn) 2 pcs. 4 mm Turquoise 267

Beads 5328 (XiLiOn) 2 pcs. 4 mm Crystal metallic Light Gold 2x 001 mLG2









qUinTET Of CRYSTAL PEARL GEmS

EARRinGS



Supplies: 4 Silver earwires TierraCast 90-1120-00 2 Sen Rings TierraCast 94-3017-12 2 Nisshu Charms TierraCast 94-2025-12 4 Maldive Larin Charms TierraCast 18” 20 gauge silver Artistic Wire 2” 20 gauge gold Artistic Wire 2 Copper Headpin TierraCast 01-0028-08 2 Copper earwires TierraCast 90-1120-08 2 Eternity Link TierraCast 94-3005-18 2 Silver Headpin TierraCast 01-0029-01 2 Large Shell Bead TierraCast 94-5679-61 2 Gold Earwires TierraCast 90-3170-01 2 Koi Fish Charm TierraCast 94-2306-01 1 1”piece of small cable chain gold 4 small oval jumprings TierraCast 01-0016-09 2 2x2 crimp beads 12” Beadalon 0.015 Stringing wire 2 Brass Oxidie Earwires TierraCast 90-1120-27 2 Buddha Bead TierraCast 94-5718-27 2 3” gold headpins


“Quintet of Crystal Pearl Gems – Earrings”, page 2

STEP 1: Cut piece of chain into two equal pieces. Open one 4 mm jump ring, slip on one end of chain and attach to one Koi fish charm. Repeat for the second side and set aside.

STEP 2: Cut the 2“ piece of 20 g wire into two equal pieces. Using one piece of wire, make a simple loop, slip on one Crystal Pearl art. 5810 4 mm Crystal Red Coral Pearl and create a simple loop on the opposite side. Repeat for the second side using the remaining wire. Open one loop and attach to open end of chain from step 1, close loop. Repeat for second side. Set aside.

STEP 3: Cut the beading wire in half. Secure one end and slip on 26 Crystal Pearls art. 5810 4 mm Crystal Red Coral Pearl and one crimp bead. Thread the opposite wire into the crimp bead and crimp. Repeat for the second side. (Note: beaded strand should resemble a loop.)

STEP 4: Open the remaining loop from step 2 and attach to the beaded loop from step 3 at the crimped portion and to one ear wire. Repeat for second side.

STEP 1: Cut the silver 20 g wire into 18 one inch pieces.

STEP 2: Using one piece from step one. Turn a simple loop. Slip on one Crystal Pearl art. 5810 4 mm Crystal Dark Lapis Pearl and turn a simple loop on the second side. Repeat 17 times more. Eighteen links are made.

STEP 3: Open one end on a link from step 2, slip on a second link and close loop, repeat once more. (Note: A chain link of three pearls has been created.)

STEP 4: Repeat step 3 five more times.

STEP 5: Open one loop end from step 4 and attach to one Maldive Larin Charm. Repeat three more times.

STEP 6: Open one loop end from step 4 and attach to one Nisshu charm. Repeat one time more.

STEP 7: Attach the chain links to the Zen Rings. Open the end loop of the Nisshu charmed link and attach to the center hole of the Zen Ring. Repeat for the second side.

STEP 8: Open the end loop on the Maldive Larin charm link and attach to the outside hole of the Zen ring. Repeat once for the opposite side.

STEP 9: Repeat step 8 for the second pair.

STEP 10: Using one silver ear wire, slip on one Crystal Pearl art. 5810 4 mm Crystal Dark Lapis Pearl. Turn a simple loop. Repeat for the second pair.

STEP 11: Open the loop made in step 10 and attach to the top loop of the Zen ring. Repeat for the second pair.

Instructions Quintet of Crystal Pearl Gems “Go Fish”

Instructions Quintet of Crystal Pearl Gems “Year of the Dragon”



“Quintet of Crystal Pearl Gems – Earrings”, page 3

STEP 1: Using one copper head pin, slip on one Crystal Pearl art. 5811 16 mm Crystal Turquoise Pearl and create simple loop. Repeat for second side.

STEP 2: Open the loop on top of the pearl made in step 1 and attach to one eternity link. Repeat for second side.

STEP 3: Using one copper ear wire, slip on one Crystal Pearl art. 5810 4 mm Crystal Turquoise Pearl and create a simple loop. Repeat for second side.

STEP 4: Open the loop created from step 3 and attach to the eternity link. Repeat for second side.

STEP 1: Using one 3“ head pin, load on one Crystal Pearl art. 5810 6 mm Crystal Ivory Pearl, (1) Buddha bead, one Crystal Pearl art. 5810 10 mm Crystal Ivory Pearl, (1) Bead art. 5040 8 mm Crystal Metallic Light Gold 2x and (1) Crystal Pearl art. 5811 16 mm Crystal Ivory Pearl. Create a wire-wrapped loop or simple loop. Repeat for second side.

STEP 2: Using a brass ear wire, slip on one Bead art. 5328 4 mm Metallic Light Gold 2x. Turn a simple loop and repeat for the second side.

STEP 3: Open the loop made in step 2 and add to the piece made in step 1. Repeat for second side.

STEP 1: Use one silver head pin and slip on one Crystal Pearl art. 5810 10 mm Crystal Jade Pearl and one large shell bead. Turn a simple loop or wire-wrap. Repeat for second side.

STEP 2: Using a silver ear wire, slip on one Bead art. 5328 4 mm Pacific Opal and turn a simple loop. Repeat for second side.

STEP 3: Open the loop made in step 2 and add to the piece made in step 1. Repeat for second side.

Instructions Quintet of Crystal Pearl Gems “Celtic Blue”

Instructions Quintet of Crystal Pearl Gems “Serenity”

Instructions Quintet of Crystal Pearl Gems “Pacific Jade”

Documents

CREATE YOUR STYLE MINI PROJECTS CRYSTAL PEARLSGEm PEARL CUff BRACELET ... STEP 2: Repeat the above step using the Swarovski Bead art. 5328 8 mm Turquoise AB, but only use 4 Beads in