Crawler excavator R 936 - Power Equipment Company · Tier4f emission standards, comprises a diesel exhaust fluid in- ... acoustic power inside the operator’s cab is is ... The engine

Crawler excavator R 936

Motor:228 HP / 170 kW SAE J1349

231 HP / 170 kW ISO 9249

Stage Tier 4f

Operating Weight:68,230 – 85,210 lb

Bucket Capacity:1.30 – 2.80 yd3

R 936 Litronic2

R 936 LitronicMotor:

228 HP / 170 kW (SAE J1349)231 HP / 170 kW (ISO 9249)Stage Tier 4f

Operating Weight: 68,230 – 85,210 lb

Bucket Capacity: 1.30 – 2.80 yd³

Performance Performance, precision and responsiveness

R 936 Litronic 3

MaintainabilitySimplified daily checks, longer maintenance intervals

Reliability

Result of ongoing improvements

Comfort

Spacious, ergonomic and with high-visibility

Efficiency

High level of productivity for a lower overall operating cost

R 936 Litronic4

Performance, precision and responsiveness

Performance

R 936 Litronic 5

Advanced techniques heighten performanceIn its design offices, Liebherr combines the technological know-how of each area to create consistent and optimised integrated systems. Liebherr’s electronics, positive control hydraulics, and even the engines are designed from the start to be intercon-nected and generate optimum operating power with fast and fluid movements.

Positive Control hydraulic systemTwo working pumps for maximum excavation power and travel power, and a pump serving the rotation circuit provides power to the components involved. Thanks to the positive control sys-tem, the combined movements are optimised for each different work operation, whether this be levelling, extraction / loading or lifting, with or without travel.

Particularly fast work cyclesThe work cycles of the R 936 are very fast thanks to the large sized transmission components. For example, the uppercar-riage’s swing drive can quickly reach its maximum speed with a high swing torque.

Operating pressureMaximum digging and break-out forces can be reached thanks to the level of hydraulic pressure, without applying temporary overpressure. Maximum forces are therefore guaranteed con-tinuously during the whole working phase to achieve a high level of production.

Liebherr Engine

• New Stage Tier4f engine with SCR exhaust gas after-treatment system

• Designed specifically for construction applications

• Liebherr common rail injection system for optimised output

• Automatic fuel-saving idling system• Fixed geometry turbo charger

Wide range of operational possibilities

• Large number of equipment variants • Versatile selection of undercarriage variants• Attachments for all applications: short

attachments for mass extractions, and long-reach, standard, luffing jib attachments

Undercarriage

• Robust design for greater resistance and a better distribution of forces

• Easy and safe transport thanks to integrated securing hooks

• Three different types of undercarriages, one with variable gauge, adapted to differ-ent operating configurations and transport conditions

R 936 Litronic6

Efficiency

High level of productivity for a lower overall operating cost

R 936 Litronic 7

Liebherr Lubricants

• Liebherr lubricants are specially developed for application in Liebherr earth moving and material handling machines and guarantee a long working life whilst simultaneously delivering the highest possible performance

• Being designed especially for your Liebherr machines, Liebherr lubricants contribute significantly to lowering your operating and maintenance costs.

Modular quick-change system made by Liebherr

• Likufix – connects all hydraulically mounted tools without having to leave the opera-tor’s cab, maximum productivity due to tool change being performed in a matter of seconds

• The suitable digging tool for every applica-tion. Your machine is a multifunctional tool carrier and will pay for itself very quickly indeed

• Mechanic and hydraulic Liebherr quick-change adapter

Less fuelThe new 4-cylinder Liebherr engine, pursuant to the Stage Tier4f emission standards, comprises a diesel exhaust fluid in-jection device (SCR) for the after-treatment of exhaust gases, with no need for a particle filter, diesel oxidation catalyst or EGR. Associated with the latest technological advances in hy-draulics, this engine consumes less fuel, both in terms of hours of operation and in terms of tons of material moved.

Increased productivityClearly enhanced performance thanks to new equipment and lower consumption, all in a comfortable and ergonomic work environment, lead to remarkable gains in productivity in all op-erating configurations.

Simplified and lower-cost maintenanceNon-slip platforms and ergonomic handles allow fast and easy access to all maintenance points not accessible from the ground. The absence of a particle filter reduces maintenance time, the cost of spare parts and filter regeneration operations.

Electronic power controlThis control system allows the engine power to be effectively and optimally converted, from an energetic point of view, into hydraulic power. This is as a result of greater forces, a faster working speed and a lower fuel consumption.

Liebherr tools

• Wide range of tools suitable for every type of application

• Tools designed for maximum productivity and durability

• Shape of buckets designed to assist the filling and stability of bulky materials during the transport stages

• Hydraulic quick coupler system

R 936 Litronic8

Reliability

Result of ongoing improvements

R 936 Litronic 9

Spare parts service

• Any spare parts required are available within 24 hours – worldwide. And that means high operational readiness of the machines, wherever, whenever

• Over 80,000 spare parts in stock at all times

Key technologies – Made by Liebherr

• Perfect matching of the components to construction machine operations

• Engine, hydraulic pumps, transfer gears, travel drives, slewing drives, slewing rings, and electronic components – all from the same source

• Main steel components, such as undercar-riage, equipment modules, and slewing superstructure, all designed by Liebherr

Quality in the minutest detailsRobust and large-sized components, optimal fitting of electri-cal and hydraulic lines, or an exemplary level of finishing are just some of the many criteria that ensure a maximum quality of manufacture and operability.

A top-of-the-range anti-corrosion protectionA pre-assembly painting process guarantees that all painted parts are fully coated. The same quality can thus be guaran-teed for all special colours specifically requested by the most exacting customers. This process is also compatible with additional protection treatments for machines operating in an aggressive saline environment.

Perfect matchThe individual components of the power train, such as the die-sel engine, gears, swing drive, working pumps and hydraulic cylinders are designed and manufactured by Liebherr. This means that they are all compatible with each other in a global system, guaranteeing greater reliability and a longer service life.

Automatic control of functionalityThe operator can entirely focus on his job, because the inte-grated on-board electronic continuously performs a compari-son with pre-determined target data. Eventual deviations from the target parameters are shown on the display.

SCR system with diesel exhaust fluid (AdBlue®)

• Diesel exhaust fluid level indicator on the display

• Liebherr design• Complies with Stage Tier4f standard• No need for particle filters (DPF),

diesel oxidation catalyst and EGR• Simple system for enhanced reliability

and less maintenance

R 936 Litronic10

Spacious, ergonomic and with high-visibility

Comfort

R 936 Litronic 11

A first class work spaceIn this cab, the operator has a pneumatic seat with horizontal and vertical damping, lots of space and a very comfortable and silent work environment. Depending on the operator’s needs, the Liebherr Premium seat can also be chosen as an option. This seat offers maximum seating comfort thanks to its pneu-matic lumbar support, its electronic weight-actuated height adjustor and its air-conditioning with activated charcoal and built-in fan. It is especially designed to meet the most exacting requirements of operators in terms of comfort, in all working situations.

Low noise level and vibrationsTo diminish fatigue at work and increase productivity, the acoustic power inside the operator’s cab is is minimized. The cab is mounted on viscoelastic rivets to fully absorb the exca-vator’s vibrations. The rubber flanges also support the pipes and actively participate in reducing external noise.

Uncompromised visibilityThe very large glazed surface area and minimal area of uprights guarantee optimal visibility from the operator’s platform, as well as a wide safety exit from the rear window for the operator’s safety and peace of mind.

Ergonomic proportional manipulatorsThe proportional manipulators are very finely tuned controls for the sensitive, accurate and fluid operation of hydraulic tools. This type of control is ideal for an R 936 used in a variety of applications.

Touch-screen display

• 7-inch touch-screen with colour display• Wide range of adjustment, check, and

monitoring possibilities• Tough, reliable design (sealing tightness

class IP 65)• Video capacity with high resolution, repro-

duces the image from the rear area monitor camera in best possible quality

New options

• Engine compartment lighting• LED headlights with adjustable intensity• 360° camera• Follow me home (headlight cutoff delay)• Windscreen wiper on bottom part from

front window• Preparation for automatic pedestrian

detection system• Preparation for machine guidance system• Preparation for weighing system

Heightened visibility

• Rear camera integrated in the counterweight as standard (camera for side area monitoring optional), for rear visibility and heightened operating safety

• Optimized design of the whole uppercarriage providing the operator with an improved field of vision

• Retractable laminated glass roof panel• Secure emergency exit through the

rear window

R 936 Litronic12

Maintainability

Simplified daily checks, longer maintenance intervals

R 936 Litronic 13

Simplified daily checksThe daily checks were taken into account from the start of the design, to make them simpler, more accessible and shorter. The engine oil or diesel exhaust fluid levels, for example, can be checked via the display in the operator’s cab. The automatic centralised lubrication system can save precious intervention time, while guaranteeing that the excavator is in optimum op-erating condition.

Longer service intervalsThe frequency of the service intervals is optimised to guaran-tee that each part is operating optimally and that the mainte-nance operations are only performed as necessary. Whether it is the interval for changing the hydraulic oil, which can be up to 8,000 hours, or the interval for changing the engine oil, which can reach 2,000 hours, everything has been taken into account to reduce the frequency of interventions and thus limit the ma-chine’s downtime and reduce costs.

A maintenance-free exhaust gas treatmentThanks to its unique Liebherr design, the exhaust gas treat-ment is carried out in compliance with the Stage Tier4f stand-ards, without fitting a particle filter, diesel oxidation catalyst or EGR. This results a maximum reliability in an output with no loss of productivity linked to the regeneration of these filters and, of course, there is no maintenance time or cost for spare parts as-sociated with this technology.

Expert advice and service provisionsLiebherr offers an expert advice service. Qualified person-nel will help you make the appropriate decisions to meet your needs: sales arguments based on the terrain, service agree-ments, advantageous repair alternatives, original parts man-agement, and remote data transfer for fleet management.

LiDAT data transfer system

• Complete fleet management, all from one source

• Optimized economical performance of the machine park thanks to detailed view of the distribution of operating states and times

• Reports on capacity commitment and the use of the machine park can be called up daily via the Web portal

• Precise location of the machine• Regional delimitation and fixed downtimes

increase safety and reliability

Hydraulic reservoir stop valve

• Easy and quick interruption of the oil circuit between hydraulic reservoir and hydraulic system

• No drainage of fluid necessary for service or repair work on the hydraulic system

Central lubrication system

• The fully-automatic central lubrication system, fitted as standard, allows for rapid maintenance: It saves time-consuming individual lubricating and downtime

• All the lubrication points on the superstructure of the vehicle and the attachment hydraulics are supplied, with the exception of the connecting plate

• Engine oil level visible on display

R 936 Litronic14

Long live progress with the R 936

Equipment

• Cast steel elements• Greater resistance to stresses• Optimal lifetime• New equipment strengthened

with more force

Tools

• Z-type Liebherr teeth for fast replacement• Wide range of work tools• QC48 and QC66 Liebherr quick-couplers

both available

Undercarriage

• Special heat treatment for low wear and tear of drive sprockets

• A wide range of undercarriages suited to each application

• Robust construction

R 936 Litronic 15

Operator’s cab

• Comfortable and ergonomic• 7” high resolution color touchscreen

for heightened readability• Rear window with improved visibility

Visibility

• Rear camera integrated in the counterweight• Optimized design of the whole uppercar-

riage providing the operator with a better field of vision

• Large glazed surface area with secure emergency exit through the rear window

Automatic centralized lubrication - standard

• Reduced maintenance time• Longer service life thanks to

better lubrication

16 R 936 Litronic

Technical Data

Swing DriveDrive Liebherr swashplate motorTransmission Liebherr compact planetary reduction gearSwing ring Liebherr, sealed race ball bearing swing ring,

internal teethSwing speed 0 – 9.3 rpm steplessSwing torque 69,330 lbf ftHolding brake wet multi-disc (spring applied, pressure released)

Hydraulic SystemHydraulic system Positive Control dual circuit hydraulic system for

independent and need-based quantity allotment via the hydraulic pumps; sensor-guided. Features high system dynamics and sensibility provided by inte-grated system controlling.Independent circuit for rotation.

Hydraulic pumpfor attachment and travel drive

Liebherr, variable displacement, swashplate double pump

Max. flow 2 x 63 gpmMax. pressure 5,511 psi

for swing drive reversible, variable flow, swashplate pump, closed-loop circuit

Max. flow 46 gpmMax. pressure 5,800 psi

Pump management electronic pump management via the integrated system controlling (CAN-BUS) synchronous to the control block

Hydraulic tank 71 galHydraulic system max. 126 galHydraulic oil filter 1 full flow filter (10 μm) in return line with integrated

fine filter area (5 μm)Cooling system compact cooler, consisting of a water cooler, sand-

wiched with hydraulic oil cooler, gearbox oil cooler, fuel cooler and after-cooler cores and hydrostatically driven fan

MODE selection adjustment of engine and hydraulic performance via a mode pre-selector to match application, e.g. for especially economical and environmentally friendly operation or for maximum digging performance and heavy-duty jobs

RPM adjustment stepless adjustment of engine output via RPM at each selected mode

Tool Control 10 preadjustable pump flows and pressures for add-on tools

EngineRating

per SAE J1349 228 HP (170 kW) at 1,800 rpmper ISO 9249 231 HP (170 kW) at 1,800 rpm

Torque 922 lbf ft at 1,100 rpmModel Liebherr D934 A7Type 4 cylinder in-line

Bore/Stroke 4.8/5.9 inDisplacement 427 in3

Engine operation 4-stroke diesel Common-Rail, monoturbo

Exhaust gas treatment SCR with urea injection emission standard Tier 4 final / Stage IV

Cooling system water-cooled and integrated motor oil cooler, after-cooled and fuel cooled

Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements

Fuel tank 148 galUrea tank 17 galElectrical system

Voltage 24 VBatteries 2 x 180 Ah/12 VStarter 24 V/7.8 kWAlternator three-phase current 28 V/100 AEngine idling sensor controlled

Motor management connection to the integrated excavator system con-trolling via CAN-BUS to the economical utilisation of the service that is available

Hydraulic ControlsThe controlling is conducted via the integrated excavator system technology, input and output modules, communicated via the CAN-BUS with the electronic central unitPower distribution via control valve with integrated safety valvesServo circuit

Attachment and swing proportional via joystick leversTravel – with proportionally functioning foot pedals and

adjusted with a plugable lever– speed pre-selection

Additional functions proportional regulation via foot pedals or rocker

R 936 Litronic 17

Operator’s CabCab ROPS safety cab structure with individual windscreens

or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a side window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspen-sion, sounddamping insulating, tinted laminated safety glass, separate window shades for the sunroof window and windscreen, 12 V plug, storage bins, lunchbox, cup holder

Operator’s seat Comfort seat, airsprung with automatic weight adjust-ment, vertical and horizontal seat damping including consoles and joysticks. Seat and armrests adjust-able separately and in combination, seat heating as standard

Control system arm consoles, swinging with the seatOperation and displays large high-resolution color display with selfexplana tory

operation via touchscreen, video, versatile adjusting, control and monitoring facilities, e.g. climate control, implement and tool parameters

Air-conditioning standard automatic air-conditioning, ambient air func-tion, fast de-icing and demisting at the press of a button, air vents can be operated via a menu. Ambient air and fresh air filters can be easily replaced and are accessible from the outside. Heating-cooling unit, designed for extreme outside temperatures, sensors for solar radiation, inside and outside temperatures

UndercarriageVersions

NLC gauge 7'10" LC gauge 8'6" LC-V gauge 7'10"/8'2" (transport position)

gauge 9'/9'6" (work position)Drive Liebherr swashplate motors with integrated brake

valves on both sidesTransmission Liebherr planetary reduction gearsTravel speed low range – 2.0 mph

high range – 3.2 mphNet drawbar pull on crawler NLC/LC: 58,675 lbf

LC-V: 66,094 lbfTrack components D7, maintenance-freeTrack rollers/Carrier rollers 9/2Tracks sealed and greasedTrack pads triple grouserHolding brake wet multi-discs (spring applied, pressure released)Brake valves integrated into travel motorLashing eyes integrated

AttachmentType combination of resistant steel plates and cast steels

componentsHydraulic cylinders Liebherr cylinders with special seal-system, shock

protectionBearings sealed, low maintenanceLubrication automatic central lubrication system (except link and

tilt geometry)Hydraulic connections pipes and hoses equipped with SAE splitflange

connectionsBucket standard equipped with Liebherr tooth system

18 R 936 Litronic

Dimensions

W

L

K

H

DE A

C

PQ

UZ

V

NSBG

X

R0288

W

L

K

H

DE A

C

PQ

UZ

V

NSBG

X

R0289

R 936 Litronic 19

NLC ft in LC ft in LC-V ft inA 9'10" 9'10" 9'10"C 10' 3" 10' 3" 10' 8"D 10' 1" 10' 1" 10' 1"E 10' 4" 10' 4" 10' 4"H 9' 1" 9' 1" 9' 5"K 3' 9" 3' 9" 4' 2"L 13' 1" 13' 1" 13' 6"P 3' 5" 3' 5" 3' 8"Q 1' 7" 1' 7" 2' 3"S 7'10" 8' 6" 7'10" – 8'2" / 9'* – 9' 6"*U 16' 2" 16' 2" 16' 5"N 20" 24" 30" 35" 20" 24" 30" 35" 20" 24" 30" 35"B 9' 9" 9'10" 10' 4"** 10'10" 10' 5" 10' 6" 10'11"** 11' 5" 9'10"** 9'10"** 10' 4"** 10'10"G 9'10" 9'10" 10'11"** 10'11"** 10' 6" 10' 6" 11' 7"** 11' 7"** 10' 9"** 10' 9"** 10' 9"** 10' 9"**Z 18' 2" 18' 2" 18' 4"

* work position** width with removable steps

NLC-UndercarriageStick lengthft in

Mono boom 19'10"ft in

Straight mono boom 21'4"ft in

Two-piece boom 13'9"ft in

V 8' 2" 19' 8" 21'10" 22' 4" 9' 2" 18' 8" 21' 2" 21' 2"10' 2" 17'11" 20' 6" 20'12'10" 15' 7" 18'10" 16'11"

W 8' 2" 10' 9' 8" 9' 4" 9' 2" 10' 9'10" 9' 4"10' 2" 10' 2" 10' 2" 9' 6"12'10" 10' 6" 11' 4" 9'10"

X 8' 2" 33' 6" 35' 3" 36' 1" 9' 2" 33' 8" 35' 3" 36' 1"10' 2" 33' 8" 35' 5" 35'11"12'10" 33'10" 35' 5" 35' 7"

LC-V-UndercarriageStick lengthft in




V 8' 2" 19' 8" 21' 8" 22' 4" 9' 2" 18' 8" 20'10" 21' 2"10' 2" 17' 9" 20' 2" 20'12'10" 15' 3" 18' 6" 17' 3"

W 8' 2" 10' 2" 9'10" 9' 6" 9' 2" 10' 2" 9'10" 9' 6"10' 2" 10' 4" 10' 2" 9' 8"12'10" 10' 6" 11' 4" 10'

X 8' 2" 33' 6" 35' 3" 36' 1" 9' 2" 33' 8" 35' 3" 36' 1"10' 2" 33' 8" 35' 5" 35'11"12'10" 33'10" 35' 5" 35' 7"

LC-UndercarriageStick lengthft in




V 8' 2" 19' 8" 21'10" 22' 4" 9' 2" 18' 8" 21' 2" 21' 2"10' 2" 17'11" 20' 6" 20'12'10" 15' 7" 18'10" 16'11"

W 8' 2" 10' 9' 8" 9' 4" 9' 2" 10' 9'10" 9' 4"10' 2" 10' 2" 10' 2" 9' 6"12'10" 10' 6" 11' 4" 9'10"

X 8' 2" 33' 6" 35' 3" 36' 1" 9' 2" 33' 8" 35' 3" 36' 1"10' 2" 33' 8" 35' 5" 35'11"12'10" 33'10" 35' 5" 35' 7"

20 R 936 Litronic

Backhoe Bucketwith Mono Boom 19'10" and Counterweight 11,905 lb

Digging Envelopewith quick coupler 1 2 3 4Stick length ft in 8'2" 9'2" 10' 2" 12'10"Max. digging depth ft in 21'2" 22'2" 23' 2" 25' 9"Max. reach at ground level ft in 33'2" 34'1" 35' 1" 37' 7"Max. dumping height ft in 22'2" 22'8" 23' 2" 24' 5"Max. teeth height ft in 33' 33'6" 33'11" 35' 5"

Digging Forceswith quick coupler 1 2 3 4Digging force ISO lbf 36,640 34,170 31,920 27,200

lb 36,600 34,170 31,970 27,120Breakout force ISO lbf 40,240 40,240 40,240 40,240

lb 40,120 40,120 40,120 40,120without quick couplerDigging force ISO lbf 38,670 35,970 33,500 28,330


lb 46,520 46,520 46,520 46,520

Operating Weight and Ground PressureThe operating weight includes the basic machine with counterweight 11,905 lb, mono boom 19'10", stick 8'2", quick coupler SW66 and bucket 1.31 yd3 (2,115 lb).

Undercarriage NLC LCPad width in 20" 24" 30" 20" 24" 30"Weight lb 68,225 69,005 71,100 68,455 69,225 71,320Ground pressure psi 10.2 8.7 7.1 10.2 8.7 7.1

Undercarriage LC-VPad width in 20" 24" 30"Weight lb 76,831 77,823 79,256Ground pressure psi 11.2 9.5 7.7

Optional: heavy counterweight(counterweight 13,890 lb increases the operating weight by 1,985 lb and ground pressure by 0.3 psi) see load tables on page 26

R0290

4 2 0681012

303540 2025 1015

m

05 ft

2

4

-2

-4

-6

-8

6

8

10

12

00

10

15

-10

-15

-20

-25

-30

-5

5

20

25

30

35

mft

12

3

4

Buckets Machine stability per ISO 10567* (75 % of tipping capacity)

Cutt

ing

wid

th

Capa

city

IS

O 74

51

Wei

ght2

)

Wei

ght3

)

NLC-Undercarriage

Stick length (ft in)

LC-Undercarriage


LC-V-Undercarriage

Stick length (ft in)8'2" 9'2" 10'2" 12'10" 8'2" 9'2" 10'2" 12'10" 8'2" 9'2" 10'2" 12'10" 8'2" 9'2" 10'2" 12'10" 8'2" 9'2" 10'2" 12'10" 8'2" 9'2" 10'2" 12'10"

in yd3 lb lb without quick coupler with quick coupler without quick coupler with quick coupler without quick coupler with quick coupler

STD1

)

41" 1.31 2,070 2,115 v v v v v v v v v v v v v v v v v v v v v v v v


55" 1.90 2,515 2,555 v v v y v v v y v v v v v v v y v v v v v v v y

61" 2.09 2,670 2,710 v v v v v v y y v v v y v v v v v v v y v v v v

65" 2.29 2,865 2,910 v v y y v y v V v v v y v v y y v v v y v v v y

61" 2.42 2,865 2,890 v y v V y y v V v v y y v v y V v v v y v v v V

65" 2.62 3,065 3,110 y v y V v y y V v y v V y y v V v v v V v v v V

69" 2.81 3,415 – v y V – – – – – y v y V – – – – v v y V – – – –* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm1) Standard bucket with teeth Z 502) Bucket for direct fitting3) Bucket for fitting to quick coupler (SW66, 772 lb)Other backhoes available on request

Max. material weight v = ≤ 3,371 lb/yd3, y = ≤ 3,034 lb/yd3, v = ≤ 2,781 lb/yd3, y = ≤ 2,528 lb/yd3, V = ≤ 2,023 lb/yd3, – = not authorized

R 936 Litronic 21

Lift Capacitieswith Mono Boom 19'10" and Counterweight 11,905 lb

Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacityThe load values are quoted in lb x 1,000 at stick end (without bucket), and may be swung 360° on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30" wide track pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 880 lb. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity.

Stick 8'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLCLCLC-V

25NLC 16,8* 16,8* 13,1* 13,1*

20' 7"LC 16,8* 16,8* 13,1* 13,1*LC-V 18,4* 18,4* 13,0* 13,0*

20NLC 17,7 19,6* 12,3* 12,3*

24' 4"LC 19,2 19,6* 12,3* 12,3*LC-V 19,7* 19,7* 12,2* 12,2*

15NLC 39,7* 39,7* 26,1 26,4* 17,0 21,4* 12,2 19,0* 11,1 12,1*

26' 6"LC 39,7* 39,7* 26,4* 26,4* 18,5 21,4* 13,2 19,0* 12,0 12,1*LC-V 41,4* 41,4* 26,8* 26,8* 21,6* 21,6* 16,3 19,1* 12,1* 12,1*

10NLC 24,1 32,0* 16,2 23,8* 11,8 19,5 10,2 12,4*

27' 7"LC 26,5 32,0* 17,6 23,8* 12,8 19,6 11,1 12,4*LC-V 32,4* 32,4* 21,9 24,0* 15,9 20,0* 12,4* 12,4*

5NLC 22,6 35,6* 15,4 25,8* 11,4 19,1 9,9 13,2*

27'10"LC 25,0 35,6* 16,9 25,8* 12,5 19,1 10,8 13,2*LC-V 31,7 35,7* 21,1 26,0* 15,5 20,8* 13,3* 13,3*

0NLC 22,1 35,9* 14,9 26,1 11,2 18,8 10,1 14,7*

27' 1"LC 24,4 35,9* 16,4 26,1 12,2 18,9 11,0 14,7*LC-V 31,2 35,8* 20,6 26,6* 15,3 20,9* 13,9 14,8*

– 5NLC 33,9* 33,9* 22,1 33,7* 14,8 25,6* 11,2 18,8 11,0 17,4*

25' 4"LC 33,9* 33,9* 24,4 33,7* 16,3 25,6* 12,2 18,9 12,0 17,4*LC-V 35,6* 35,6* 31,3 33,5* 20,5 25,4* 15,3 19,2* 15,2 17,7*

– 10NLC 37,4* 37,4* 22,4 29,2* 15,1 22,1* 13,2 18,6*

22' 4"LC 37,4* 37,4* 24,8 29,2* 16,5 22,1* 14,4 18,6*LC-V 36,7* 36,7* 28,6* 28,6* 20,8 21,6* 18,4 18,5*

– 15NLC 20,0* 20,0* 17,4* 17,4*

16' 8"LC 20,0* 20,0* 17,4* 17,4*LC-V

– 20NLCLCLC-V

Stick 10'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLCLCLC-V

25NLC 10,1* 10,1*

23' LC 10,1* 10,1*LC-V 10,0* 10,0*

20NLC 17,8* 17,8* 12,5 15,4* 9,5* 9,5*

26'5"LC 17,8* 17,8* 13,6 15,4* 9,5* 9,5*LC-V 17,9* 17,9* 16,1* 16,1* 9,5* 9,5*

15NLC 17,2 19,8* 12,2 17,7* 9,4* 9,4*

28'5"LC 18,7 19,8* 13,3 17,7* 9,4* 9,4*LC-V 24,2* 24,2* 20,0* 20,0* 16,4 17,8* 9,4* 9,4*

10NLC 24,5 29,5* 16,3 22,4* 11,8 18,9* 9,1 9,5*

29'6"LC 27,0 29,5* 17,7 22,4* 12,8 18,9* 9,5* 9,5*LC-V 30,0* 30,0* 22,0 22,6* 15,9 19,0* 9,6* 9,6*

5NLC 22,8 34,1* 15,4 24,8* 11,3 19,0 8,9 10,1*

29'8"LC 25,2 34,1* 16,8 24,8* 12,4 19,1 9,7 10,1*LC-V 31,9 34,3* 21,1 25,0* 15,4 20,1* 10,2* 10,2*

0NLC 18,1* 18,1* 21,9 35,7* 14,8 25,9 11,0 18,6 9,0 11,1*

29' LC 18,1* 18,1* 24,3 35,7* 16,2 26,0 12,0 18,7 9,9 11,1*LC-V 19,1* 19,1* 31,0 35,7* 20,4 26,2* 15,1 20,7* 11,2* 11,2*

– 5NLC 31,3* 31,3* 21,7 34,6* 14,5 25,6 10,8 18,5 9,7 12,9*

27'4"LC 31,3* 31,3* 24,0 34,6* 16,0 25,7 11,9 18,5 10,6 12,9*LC-V 32,5* 32,5* 30,8 34,4* 20,2 25,8* 15,0 20,0* 13,1* 13,1*

– 10NLC 42,3* 42,3* 21,9 31,2* 14,6 23,5* 11,3 16,3*

24'7"LC 42,3* 42,3* 24,3 31,2* 16,1 23,5* 12,3 16,3*LC-V 41,6* 41,6* 30,7* 30,7* 20,4 23,2* 15,8 16,7*

– 15NLC 31,9* 31,9* 22,6 24,2* 15,2 16,9* 15,0 16,5*

20'2"LC 31,9* 31,9* 24,2* 24,2* 16,7 16,9* 16,5* 16,5*LC-V 30,7* 30,7* 23,4* 23,4* 16,3* 16,3*

– 20NLCLCLC-V

Stick 9'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLCLCLC-V

25NLC 18,0 18,4* 11,5* 11,5*

21'10"LC 18,4* 18,4* 11,5* 11,5*LC-V 18,4* 18,4* 11,4* 11,4*

20NLC 17,8 18,7* 12,4 12,9* 10,7* 10,7*

25' 4"LC 18,7* 18,7* 12,9* 12,9* 10,7* 10,7*LC-V 18,8* 18,8* 14,1* 14,1* 10,7* 10,7*

15NLC 25,1* 25,1* 17,1 20,6* 12,2 18,3* 10,5 10,6*

27' 6"LC 25,1* 25,1* 18,6 20,6* 13,3 18,3* 10,6* 10,6*LC-V 37,4* 37,4* 25,5* 25,5* 20,8* 20,8* 16,3 18,4* 10,6* 10,6*

10NLC 24,3 30,8* 16,2 23,1* 11,8 19,4* 9,6 10,8*

28' 6"LC 26,7 30,8* 17,7 23,1* 12,8 19,4* 10,5 10,8*LC-V 31,2* 31,2* 21,9 23,4* 15,9 19,5* 10,9* 10,9*

5NLC 22,7 34,9* 15,4 25,4* 11,4 19,0 9,4 11,5*

28' 8"LC 25,1 34,9* 16,8 25,4* 12,4 19,1 10,2 11,5*LC-V 31,8 35,1* 21,1 25,5* 15,5 20,5* 11,6* 11,6*

0NLC 22,0 35,9* 14,9 26,0 11,1 18,7 9,6 12,7*

28' LC 24,3 35,9* 16,3 26,1 12,1 18,8 10,4 12,7*LC-V 17,2* 17,2* 31,1 35,8* 20,5 26,4* 15,2 20,9* 12,8* 12,8*

– 5NLC 32,6* 32,6* 21,9 34,3* 14,7 25,8 11,0 18,6 10,3 14,9*

26' 4"LC 32,6* 32,6* 24,2 34,3* 16,1 25,8* 12,0 18,7 11,3 14,9*LC-V 34,0* 34,0* 31,0 34,0* 20,4 25,7* 15,1 19,8* 14,3 15,1*

– 10NLC 40,0* 40,0* 22,2 30,2* 14,8 22,9* 12,2 18,1*

23' 5"LC 40,0* 40,0* 24,5 30,2* 16,3 22,9* 13,3 18,1*LC-V 39,3* 39,3* 29,8* 29,8* 20,6 22,5* 17,0 18,1*

– 15NLC 22,3* 22,3* 16,5* 16,5*

18'10"LC 22,3* 22,3* 16,5* 16,5*LC-V 21,3* 21,3* 16,2* 16,2*

– 20NLCLCLC-V

Stick 12'10" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLC 8,4* 8,4*

21'8"LC 8,4* 8,4*LC-V 8,2* 8,2*

25NLC 10,9* 10,9* 7,5* 7,5*

26'2"LC 10,9* 10,9* 7,5* 7,5*LC-V 11,5* 11,5* 7,4* 7,4*

20NLC 12,8 15,1* 7,1* 7,1*

29'1"LC 13,9 15,1* 7,1* 7,1*LC-V 15,2* 15,2* 7,1* 7,1*

15NLC 17,6* 17,6* 12,5 16,1* 9,2 10,8* 7,0* 7,0*

31' LC 17,6* 17,6* 13,5 16,1* 10,0 10,8* 7,0* 7,0*LC-V 17,8* 17,8* 16,2* 16,2* 11,1* 11,1* 7,0* 7,0*

10NLC 40,4* 40,4* 25,6 26,1* 16,7 20,5* 12,0 17,6* 9,0 14,2* 7,1* 7,1*

32' LC 40,4* 40,4* 26,1* 26,1* 18,2 20,5* 13,0 17,6* 9,8 14,2* 7,1* 7,1*LC-V 41,7* 41,7* 26,6* 26,6* 20,8* 20,8* 16,1 17,7* 12,2 14,5* 7,1* 7,1*

5NLC 19,5* 19,5* 23,5 31,8* 15,7 23,4* 11,4 19,1* 8,7 14,5 7,5* 7,5*

32'1"LC 19,5* 19,5* 25,9 31,8* 17,1 23,4* 12,5 19,1* 9,5 14,6 7,5* 7,5*LC-V 19,1* 19,1* 32,1* 32,1* 21,4 23,6* 15,5 19,2* 11,9 16,4* 7,5* 7,5*

0NLC 21,0* 21,0* 22,1 35,0* 14,9 25,4* 11,0 18,6 8,5 14,3 7,9 8,2*

31'6"LC 21,0* 21,0* 24,5 35,0* 16,3 25,4* 12,0 18,7 9,3 14,3 8,2* 8,2*LC-V 21,5* 21,5* 31,3 35,1* 20,6 25,5* 15,1 20,3* 11,7 15,8* 8,2* 8,2*

– 5NLC 28,8* 28,8* 21,6 35,4* 14,5 25,6 10,7 18,3 8,4 9,3*

30' LC 28,8* 28,8* 24,0 35,4* 15,9 25,7 11,7 18,4 9,2 9,3*LC-V 29,6* 29,6* 30,7 35,3* 20,1 26,0* 14,8 20,4* 9,4* 9,4*

– 10NLC 40,1* 40,1* 21,6 33,3* 14,4 24,9* 10,7 18,3 9,5 11,2*

27'6"LC 40,1* 40,1* 23,9 33,3* 15,8 24,9* 11,7 18,4 10,4 11,2*LC-V 41,2* 41,2* 30,8 33,0* 20,1 24,7* 14,8 18,9* 11,5* 11,5*

– 15NLC 39,3* 39,3* 22,0 28,4* 14,6 21,1* 11,8 15,4*

23'8"LC 39,3* 39,3* 24,4 28,4* 16,1 21,1* 12,9 15,4*LC-V 38,4* 38,4* 27,8* 27,8* 20,4 20,6* 16,0* 16,0*

– 20NLCLCLC-V

22 R 936 Litronic

Backhoe Bucketwith Straight Mono Boom 21'4" and Counterweight 11,905 lb

Digging Envelopewith quick coupler 1 2 3 4Stick length ft in 8' 2" 9' 2" 10' 2" 12'10"Max. digging depth ft in 19'10" 20'10" 21'10" 24' 5"Max. reach at ground level ft in 34'11" 35'11" 36'11" 39' 4"Max. dumping height ft in 26' 1" 26' 9" 27' 7" 29' 4"Max. teeth height ft in 37' 9" 38' 5" 39' 1" 41'





lb 46,520 46,520 46,520 46,520

Operating Weight and Ground PressureThe operating weight includes the basic machine with counterweight 11,905 lb, straight mono boom 21'4", stick 8'2", quick coupler SW66 and bucket 1.31 yd3 (2,115 lb).



Optional: heavy counterweight(counterweight 13,890 lb increases the operating weight by 1,985 lb and ground pressure by 0.3 psi) see load tables on page 27

R0292

4 2 0681012

303540 2025 1015

m

05 ft

2

4

-2

-4

-6

-8

6

8

10

12

00

10

15

-10

-15

-20

-25

-30

-5

5

20

25

30

35

40

mft

12

3

4


Cutt

ing

wid

th

Capa

city

IS

O 74

51

Wei

ght2

)

Wei

ght3

)

NLC-Undercarriage


LC-Undercarriage


LC-V-Undercarriage



STD1

)


49" 1.63 2,360 2,405 v v v y v v v y v v v v v v v v v v v v v v v v

55" 1.90 2,515 2,555 v v y v v v y y v v v y v v v v v v v y v v v y

61" 2.09 2,670 2,710 v y v V y v y V v v y v v v y y v v v v v v v y

65" 2.29 2,865 2,910 y v y V v y V V v y v y y y v V v v v y v v v V

61" 2.42 2,865 2,890 v y y V y y V – y y v V y v y V v v v y v v v V

65" 2.62 3,065 3,110 y V V – V V V – v v y V v y V – v v v V v v v V

69" 2.81 3,415 – V V V – – – – – y V V – – – – – v v y – – – – –* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm1) Standard bucket with teeth Z 502) Bucket for direct fitting3) Bucket for fitting to quick coupler (SW66, 772 lb)Other backhoes available on request


R 936 Litronic 23

Lift Capacitieswith Straight Mono Boom 21'4" and Counterweight 11,905 lb


Stick 8'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLC 15,5* 15,5*

17' 7"LC 15,5* 15,5*LC-V 15,2* 15,2*

25NLC 17,7 20,8* 13,2* 13,2*

22'11"LC 19,3 20,8* 13,2* 13,2*LC-V 20,7* 20,7* 13,1* 13,1*

20NLC 25,6* 25,6* 17,4 21,4* 12,2 19,1* 11,2 12,3*

26' 4"LC 25,6* 25,6* 18,9 21,4* 13,3 19,1* 12,2 12,3*LC-V 25,9* 25,9* 21,5* 21,5* 16,4 19,1* 12,3* 12,3*

15NLC 25,1 30,0* 16,6 23,2* 11,9 19,6* 9,8 12,1*

28' 4"LC 27,6 30,0* 18,1 23,2* 13,0 19,6* 10,7 12,1*LC-V 30,4* 30,4* 22,3 23,3* 16,1 19,7* 12,1* 12,1*

10NLC 23,0 34,6* 15,6 25,2* 11,5 19,2 9,1 12,2*

29' 5"LC 25,4 34,6* 17,1 25,2* 12,6 19,3 9,9 12,2*LC-V 32,1 34,8* 21,3 25,3* 15,6 20,4* 12,3* 12,3*

5NLC 21,8 24,8* 14,9 26,0 11,1 18,8 8,9 12,8*

29' 7"LC 24,1 24,8* 16,4 26,1 12,2 18,8 9,7 12,8*LC-V 24,9* 24,9* 20,6 26,3* 15,2 20,8* 12,2 12,9*

0NLC 21,5 33,2* 14,5 25,6 10,9 18,5 9,1 13,9*

28'11"LC 23,9 33,2* 16,0 25,7 11,9 18,6 9,9 13,9*LC-V 30,7 33,4* 20,2 25,8* 15,0 20,3* 12,5 14,0*

– 5NLC 22,2* 22,2* 21,7 29,9* 14,5 23,9* 10,9 18,5 9,8 15,8*

27' 2"LC 22,2* 22,2* 24,0 29,9* 15,9 23,9* 11,9 18,5 10,8 15,8*LC-V 24,0* 24,0* 29,5* 29,5* 20,2 23,6* 15,0 18,3* 13,6 15,7*

– 10NLC 22,1 24,3* 14,7 19,6* 11,5 14,0*

24' 6"LC 24,3* 24,3* 16,2 19,6* 12,6 14,0*LC-V 23,7* 23,7* 19,1* 19,1* 13,8* 13,8*

– 15NLCLCLC-V

– 20NLCLCLC-V

Stick 10'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLC 14,6* 14,6* 11,6* 11,6*

20' 7"LC 14,6* 14,6* 11,6* 11,6*LC-V 15,9* 15,9* 11,4* 11,4*

25NLC 18,0 19,0* 12,2* 12,2* 10,2* 10,2*

25' 4"LC 19,0* 19,0* 12,2* 12,2* 10,2* 10,2*LC-V 19,0* 19,0* 13,5* 13,5* 10,1* 10,1*

20NLC 17,6 19,9* 12,3 17,9* 9,6* 9,6*

28' 5"LC 19,1 19,9* 13,4 17,9* 9,6* 9,6*LC-V 20,0* 20,0* 16,5 17,9* 9,5* 9,5*

15NLC 25,8 27,6* 16,7 21,8* 12,0 18,6* 8,9 11,6* 8,8 9,4*

30' 4"LC 27,6* 27,6* 18,2 21,8* 13,0 18,6* 9,7 11,6* 9,4* 9,4*LC-V 28,0* 28,0* 22,0* 22,0* 16,1 18,7* 12,1 12,3* 9,4* 9,4*

10NLC 23,5 32,6* 15,7 24,0* 11,5 19,2 8,7 14,5 8,2 9,4*

31' 4"LC 25,9 32,6* 17,2 24,0* 12,5 19,2 9,5 14,6 8,9 9,4*LC-V 32,6 32,9* 21,4 24,2* 15,6 19,7* 11,9 16,6 9,5* 9,5*

5NLC 21,8 35,3* 14,9 25,7* 11,0 18,7 8,5 14,3 8,0 9,8*

31' 6"LC 24,2 35,3* 16,3 25,7* 12,0 18,7 9,3 14,4 8,7 9,8*LC-V 30,9 35,3* 20,5 25,7* 15,1 20,4* 11,7 16,3 9,9* 9,9*

0NLC 21,2 34,7* 14,3 25,4 10,7 18,3 8,4 14,2 8,1 10,6*

30'10"LC 23,6 34,7* 15,8 25,5 11,7 18,3 9,2 14,2 8,9 10,6*LC-V 30,3 34,5* 20,0 25,9* 14,8 20,4* 11,6 16,2* 10,7* 10,7*

– 5NLC 22,3* 22,3* 21,2 31,8* 14,1 24,6* 10,5 18,2 8,7 11,9*

29' 4"LC 22,3* 22,3* 23,5 31,8* 15,6 24,6* 11,6 18,2 9,5 11,9*LC-V 23,4* 23,4* 30,3 31,5* 19,8 24,4* 14,7 19,1* 12,0* 12,0*

– 10NLC 32,4* 32,4* 21,5 27,0* 14,3 21,3* 10,7 16,0* 9,9 13,6*

26' 8"LC 32,4* 32,4* 23,9 27,0* 15,7 21,3* 11,7 16,0* 10,9 13,6*LC-V 31,7* 31,7* 26,5* 26,5* 20,0 20,9* 14,9 15,6* 13,4* 13,4*

– 15NLC 19,3* 19,3* 14,8 14,9* 11,9* 11,9*

22' 4"LC 19,3* 19,3* 14,9* 14,9* 11,9* 11,9*LC-V 18,5* 18,5* 14,1* 14,1* 12,6* 12,6*

– 20NLCLCLC-V

Stick 9'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLC 13,3* 13,3*

19' 2"LC 13,3* 13,3*LC-V 13,1* 13,1*

25NLC 17,9 19,9* 11,6* 11,6*

24' 1"LC 19,4 19,9* 11,6* 11,6*LC-V 19,9* 19,9* 11,5* 11,5*

20NLC 17,5 20,7* 12,3 18,5* 10,5 10,8*

27' 4"LC 19,0 20,7* 13,4 18,5* 10,8* 10,8*LC-V 24,8* 24,8* 20,8* 20,8* 16,5 18,5* 10,8* 10,8*

15NLC 25,5 28,8* 16,7 22,5* 12,0 19,1* 9,3 10,6*

29' 4"LC 27,9 28,8* 18,2 22,5* 13,0 19,1* 10,1 10,6*LC-V 29,3* 29,3* 22,4 22,7* 16,1 19,2* 10,6* 10,6*

10NLC 23,2 33,6* 15,7 24,6* 11,5 19,2 8,8 14,0* 8,6 10,7*

30' 4"LC 25,6 33,6* 17,2 24,6* 12,5 19,3 9,6 14,0* 9,4 10,7*LC-V 32,3 33,9* 21,4 24,8* 15,6 20,1* 12,0 14,4* 10,7* 10,7*

5NLC 21,8 31,3* 14,9 26,0* 11,1 18,7 8,6 14,4 8,4 11,2*

30' 6"LC 24,2 31,3* 16,3 26,0* 12,1 18,8 9,4 14,4 9,2 11,2*LC-V 30,9 31,0* 20,5 26,1* 15,2 20,7* 11,8 16,3* 11,2* 11,2*

0NLC 21,4 34,3* 14,4 25,5 10,8 18,4 8,6 12,1*

29'10"LC 23,7 34,3* 15,9 25,6 11,8 18,5 9,4 12,1*LC-V 30,5 34,1* 20,1 25,9* 14,9 20,4* 11,9 12,2*

– 5NLC 22,5* 22,5* 21,4 31,0* 14,3 24,3* 10,7 18,3 9,3 13,6*

28' 4"LC 22,5* 22,5* 23,8 31,0* 15,8 24,3* 11,7 18,4 10,1 13,6*LC-V 23,9* 23,9* 30,6 30,6* 20,0 24,0* 14,8 18,7* 12,9 13,8*

– 10NLC 29,4* 29,4* 21,8 25,7* 14,5 20,5* 11,0 14,9* 10,7 13,8*

25' 7"LC 29,4* 29,4* 24,2 25,7* 16,0 20,5* 12,0 14,9* 11,7 13,8*LC-V 25,2* 25,2* 20,1* 20,1* 14,3* 14,3* 13,7* 13,7*

– 15NLCLCLC-V

– 20NLCLCLC-V

Stick 12'10" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLC 10,3* 10,3*

18' LC 10,3* 10,3*LC-V 10,0* 10,0*

30NLC 8,4* 8,4*

24' 4"LC 8,4* 8,4*LC-V 8,3* 8,3*

25NLC 12,8 14,6* 7,5* 7,5*

28' 5"LC 13,9 14,6* 7,5* 7,5*LC-V 14,8* 14,8* 7,5* 7,5*

20NLC 17,4* 17,4* 12,6 16,4* 9,2 11,4* 7,1* 7,1*

31' 2"LC 17,4* 17,4* 13,7 16,4* 10,0 11,4* 7,1* 7,1*LC-V 17,5* 17,5* 16,5* 16,5* 11,8* 11,8* 7,1* 7,1*

15NLC 22,9* 22,9* 17,2 20,0* 12,2 17,4* 9,1 14,9 7,0* 7,0*

32'11"LC 22,9* 22,9* 18,7 20,0* 13,3 17,4* 9,9 15,0 7,0* 7,0*LC-V 24,3* 24,3* 20,2* 20,2* 16,3 17,5* 12,3 15,6* 7,0* 7,0*

10NLC 24,5 29,9* 16,1 22,6* 11,6 18,6* 8,8 14,6 7,1* 7,1*

33'10"LC 27,0 29,9* 17,6 22,6* 12,7 18,6* 9,6 14,7 7,1* 7,1*LC-V 30,3* 30,3* 21,9 22,8* 15,8 18,7* 12,0 16,2* 7,1* 7,1*

5NLC 22,5 34,0* 15,1 24,7* 11,1 18,8 8,5 14,3 7,0 7,3*

34' LC 24,9 34,0* 16,6 24,7* 12,1 18,8 9,3 14,4 7,3* 7,3*LC-V 31,6 34,2* 20,8 24,9* 15,2 19,8* 11,7 16,3 7,4* 7,4*

0NLC 13,0* 13,0* 21,4 35,2* 14,4 25,5 10,6 18,3 8,3 14,1 7,1 7,8*

33' 5"LC 13,0* 13,0* 23,7 35,2* 15,9 25,6 11,7 18,4 9,1 14,1 7,8* 7,8*LC-V 13,6* 13,6* 30,5 35,2* 20,1 25,8* 14,7 20,3* 11,5 16,1 7,9* 7,9*

– 5NLC 21,2* 21,2* 21,0 33,7* 14,0 25,1 10,4 18,0 8,2 14,0 7,6 8,7*

32' LC 21,2* 21,2* 23,4 33,7* 15,5 25,2 11,4 18,1 9,0 14,0 8,3 8,7*LC-V 22,0* 22,0* 30,1 33,5* 19,7 25,2* 14,5 19,8* 11,4 15,5* 8,7* 8,7*

– 10NLC 31,7* 31,7* 21,1 30,1* 14,0 23,1* 10,4 17,9* 8,4 10,1*

29' 8"LC 31,7* 31,7* 23,5 30,1* 15,5 23,1* 11,4 17,9* 9,3 10,1*LC-V 32,7* 32,7* 29,7* 29,7* 19,7 22,8* 14,5 17,7* 10,2* 10,2*

– 15NLC 30,3* 30,3* 21,6 24,0* 14,3 18,6* 10,7 13,2* 10,2 11,4*

26' 2"LC 30,3* 30,3* 24,0 24,0* 15,8 18,6* 11,8 13,2* 11,2 11,4*LC-V 29,3* 29,3* 23,3* 23,3* 18,1* 18,1* 12,6* 12,6* 11,2* 11,2*

– 20NLCLCLC-V

24 R 936 Litronic

Backhoe Bucketwith Two-Piece Boom 13'9" and Counterweight 13,890 lb

Digging Envelopewith quick coupler 1 2 3 4Stick length ft in 8'2" 9'2" 10'2" 12'10"Max. digging depth ft in 22'6" 23'5" 24'5" 27' 1"Max. reach at ground level ft in 35'9" 36'9" 37'9" 40' 2"Max. dumping height ft in 28'8" 29'6" 30'4" 32' 6"Max. teeth height ft in 40'8" 41'4" 42'2" 44' 3"

Operating Weight and Ground PressureThe operating weight includes the basic machine with counterweight 13,890 lb, two-piece boom 13'9", stick 8'2", quick coupler SW66 and bucket 1.31 yd3 (2,115 lb).







lb 46,520 46,520 46,520 46,520

R0291

4 2 0681012

303540 2025 1015

m

05 ft

2

4

-2

-4

-6

-8

6

8

10

14

12

00

10

15

-10

-15

-20

-25

-30

-5

5

20

25

30

35

40

45

mft

12

3

4


Cutt

ing

wid

th

Capa

city

IS

O 74

51

Wei

ght2

)

Wei

ght3

)

NLC-Undercarriage


LC-Undercarriage


LC-V-Undercarriage



STD1

)


49" 1.63 2,360 2,405 v v v y v v v v v v v v v v v v v v v v v v v v

55" 1.90 2,515 2,555 v v y v v y y y v v v y v v v v v v v v v v v y

61" 2.09 2,670 2,710 v y v V y v y V v v y v v y y y v v v y v v v v

65" 2.29 2,865 2,910 y v y V v y V – v y v y y v v V v v v y v v v V

61" 2.42 2,865 2,890 v y V V y V V – y v v V y v y V v v v y v v v V

65" 2.62 3,065 3,110 y V V – V V V – v y y V v y V – v v v V v v y V

69" 2.81 3,415 – V V – – – – – – y V V – – – – – v v y V – – – –* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm1) Standard bucket with teeth Z 502) Bucket for direct fitting3) Bucket for fitting to quick coupler (SW66, 772 lb)Other backhoes available on request


R 936 Litronic 25

Lift Capacitieswith Two-Piece Boom 13'9" and Counterweight 13,890 lb

Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacityThe load values are quoted in lb x 1,000 at stick end (without bucket), and may be swung 360° on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 30" wide track pads with adjusting cylinder in optimal position. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 880 lb. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity.

Stick 8'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V 19,5* 19,5*

30NLC 24,9* 24,9* 14,5* 14,5*

19' LC 24,9* 24,9* 14,5* 14,5*LC-V 25,2* 25,2* 14,3* 14,3*

25NLC 27,2* 27,2* 19,5 22,8* 12,8* 12,8*

24' LC 27,2* 27,2* 21,0 22,8* 12,8* 12,8*LC-V 27,5* 27,5* 22,8* 22,8* 12,8* 12,8*

20NLC 42,7* 42,7* 28,9 29,7* 19,4 23,4* 13,2 19,7* 11,1 12,2*

27' 2"LC 42,7* 42,7* 29,7* 29,7* 20,7 23,4* 14,3 19,7* 12,1 12,2*LC-V 43,4* 43,4* 29,9* 29,9* 23,5* 23,5* 17,5 19,7* 12,2* 12,2*

15NLC 43,4* 43,4* 27,9 32,9* 19,0 24,6* 13,3 19,9* 9,6 12,1*

29' 2"LC 43,4* 43,4* 29,9 32,9* 20,3 24,6* 14,4 19,9* 10,5 12,1*LC-V 42,9* 42,9* 33,1* 33,1* 23,6 24,7* 17,5 20,0* 12,1* 12,1*

10NLC 41,5* 41,5* 27,3 34,3* 18,5 25,4* 13,0 20,1 9,0 14,8* 8,9 12,4*

30' 2"LC 41,5* 41,5* 29,2 34,3* 20,1 25,4* 14,1 20,1* 9,9 14,8* 9,8 12,4*LC-V 35,5* 35,5* 33,8 34,3* 23,3 25,4* 17,3 20,1* 12,4 15,4* 12,2 12,4*

5NLC 18,9* 18,9* 25,8 34,3* 17,4 25,3* 12,5 20,0 8,9 15,0 8,6 13,0*

30' 5"LC 18,9* 18,9* 28,5 34,3* 19,0 25,3* 13,7 20,0* 9,7 15,1 9,5 13,0*LC-V 21,5* 21,5* 33,8 34,4* 23,2 25,3* 16,8 20,0* 12,2 15,3* 11,9 13,1*

0NLC 37,6* 37,6* 24,4 34,6* 16,5 25,4* 11,9 20,1 8,8 13,4*

29' 8"LC 37,6* 37,6* 27,0 34,6* 18,1 25,4* 13,1 20,2 9,7 13,4*LC-V 39,0* 39,0* 34,0 34,7* 22,5 25,4* 16,2 20,2* 12,3 13,3*

– 5NLC 45,0 52,8* 23,8 35,1* 16,0 25,9* 11,4 18,7* 9,5 11,5*

28' 1"LC 51,2 52,8* 26,3 35,1* 17,6 25,9* 12,5 18,7* 10,4 11,5*LC-V 52,5* 52,5* 33,4 35,0* 22,0 25,8* 15,7 18,4* 11,3* 11,3*

– 10NLC 45,5 48,6* 23,8 33,2* 15,7 22,9* 10,2* 10,2* 9,2* 9,2*

25' 4"LC 48,6* 48,6* 26,4 33,2* 17,3 22,9* 10,2* 10,2* 9,2* 9,2*LC-V 48,0* 48,0* 32,9* 32,9* 21,7 22,2* 9,4* 9,4*

– 15NLC 38,0* 38,0* 22,2* 22,2* 14,5* 14,5*

17'10"LC 38,0* 38,0* 22,2* 22,2* 14,5* 14,5*LC-V 36,5* 36,5* 20,3* 20,3* 15,7* 15,7*

– 20NLCLCLC-V

Stick 10'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLC 13,9* 13,9*

14' 6"LC 13,9* 13,9*LC-V 14,5* 14,5* 13,5* 13,5*

30NLC 20,7* 20,7* 16,7* 16,7* 11,0* 11,0*

21'11"LC 20,7* 20,7* 16,7* 16,7* 11,0* 11,0*LC-V 20,7* 20,7* 17,4* 17,4* 10,9* 10,9*

25NLC 21,1* 21,1* 19,7 20,9* 13,3 15,2* 9,9* 9,9*

26' 4"LC 21,1* 21,1* 20,9* 20,9* 14,4 15,2* 9,9* 9,9*LC-V 21,2* 21,2* 21,1* 21,1* 16,0* 16,0* 9,8* 9,8*

20NLC 25,3* 25,3* 19,4 22,4* 13,6 18,9* 9,4* 9,4*

29' 4"LC 25,3* 25,3* 20,7 22,4* 14,7 18,9* 9,4* 9,4*LC-V 25,3* 25,3* 26,1* 26,1* 22,4* 22,4* 17,7 18,9* 9,4* 9,4*

15NLC 45,8* 45,8* 28,0 31,2* 19,0 23,7* 13,7 19,3* 9,4 15,5* 8,7 9,4*

31' 1"LC 45,8* 45,8* 30,0 31,2* 20,2 23,7* 14,8 19,3* 10,3 15,5* 9,4* 9,4*LC-V 45,7* 45,7* 31,5* 31,5* 23,6 23,8* 17,5 19,4* 12,7 16,0* 9,4* 9,4*

10NLC 42,7* 42,7* 27,1 33,9* 18,6 24,8* 13,3 19,7* 9,3 15,4 8,0 9,5*

32' 1"LC 42,7* 42,7* 29,1 33,9* 19,8 24,8* 14,5 19,7* 10,2 15,5 8,8 9,5*LC-V 42,7* 42,7* 33,6 34,0* 23,1 24,9* 17,3 19,7* 12,6 16,2* 9,6* 9,6*

5NLC 36,1* 36,1* 26,3 33,9* 17,6 25,0* 12,7 19,6 9,0 15,2 7,8 10,0*

32' 4"LC 36,1* 36,1* 28,8 33,9* 19,2 25,0* 13,8 19,6* 9,9 15,2 8,6 10,0*LC-V 35,5* 35,5* 33,3 33,9* 22,9 24,9* 17,0 19,6* 12,3 16,1* 10,1* 10,1*

0NLC 38,6* 38,6* 24,5 34,1* 16,5 25,0* 12,1 19,7* 8,7 14,8 7,9 10,9*

31' 7"LC 38,6* 38,6* 27,1 34,1* 18,1 25,0* 13,2 19,7* 9,6 14,9 8,7 10,9*LC-V 39,3* 39,3* 33,6 34,1* 22,5 25,0* 16,4 19,7* 12,0 15,1* 10,9* 10,9*

– 5NLC 44,5 50,1* 23,6 34,6* 15,9 25,4* 11,5 19,7 8,5 11,5* 8,4 11,1*

30' 1"LC 50,1* 50,1* 26,2 34,6* 17,5 25,4* 12,6 19,7* 9,3 11,5* 9,3 11,1*LC-V 51,3* 51,3* 33,2 34,7* 21,9 25,5* 15,8 19,6* 10,9* 10,9*

– 10NLC 44,7 50,8* 23,4 34,0* 15,7 24,9* 11,1 15,8* 8,7* 8,7*

27' 8"LC 50,8* 50,8* 25,9 34,0* 17,3 24,9* 12,2 15,8* 8,7* 8,7*LC-V 50,4* 50,4* 33,0 33,8* 21,7 24,7* 15,2* 15,2* 8,4* 8,4*

– 15NLC 43,4* 43,4* 23,9 29,0* 15,4 16,2* 10,7* 10,7*

22' 1"LC 43,4* 43,4* 26,4 29,0* 16,2* 16,2* 10,7* 10,7*LC-V 42,5* 42,5* 27,8* 27,8* 14,9* 14,9* 11,2* 11,2*

– 20NLCLCLC-V

Stick 9'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLC 16,7* 16,7*

12,2"LC 16,7* 16,7*LC-V 16,0* 16,0*

30NLC 22,7* 22,7* 14,8* 14,8* 12,6* 12,6*

20,5"LC 22,7* 22,7* 14,8* 14,8* 12,6* 12,6*LC-V 22,9* 22,9* 16,5* 16,5* 12,4* 12,4*

25NLC 23,9* 23,9* 19,7 22,2* 12,3* 12,3* 11,2* 11,2*

25,2"LC 23,9* 23,9* 21,0 22,2* 12,3* 12,3* 11,2* 11,2*LC-V 24,1* 24,1* 22,2* 22,2* 14,0* 14,0* 11,2* 11,2*

20NLC 30,9* 30,9* 28,9* 28,9* 19,4 22,9* 13,4 19,3* 10,4 10,7*

28,2"LC 30,9* 30,9* 28,9* 28,9* 20,7 22,9* 14,6 19,3* 10,7* 10,7*LC-V 34,3* 34,3* 29,1* 29,1* 23,0* 23,0* 17,7 19,3* 10,7* 10,7*

15NLC 44,9* 44,9* 28,0 32,1* 19,0 24,2* 13,5 19,7* 9,3 11,9* 9,1 10,6*

30,2"LC 44,9* 44,9* 29,9 32,1* 20,3 24,2* 14,6 19,7* 10,1 11,9* 10,0 10,6*LC-V 44,4* 44,4* 32,3* 32,3* 23,6 24,3* 17,6 19,7* 12,6 12,8* 10,6* 10,6*

10NLC 42,5* 42,5* 27,2 34,3* 18,7 25,1* 13,2 19,9* 9,2 15,3 8,5 10,8*

31,2"LC 42,5* 42,5* 29,1 34,3* 19,9 25,1* 14,3 19,9* 10,0 15,4 9,3 10,8*LC-V 42,6* 42,6* 33,7 34,3* 23,2 25,2* 17,5 19,9* 12,5 16,3* 10,8* 10,8*

5NLC 30,0* 30,0* 26,1 34,1* 17,5 25,1* 12,7 19,8 8,9 15,1 8,2 11,4*

31,4"LC 30,0* 30,0* 28,7 34,1* 19,1 25,1* 13,8 19,8* 9,8 15,1 9,0 11,4*LC-V 30,1* 30,1* 33,5 34,1* 23,1 25,1* 17,0 19,8* 12,3 15,9* 11,4 11,4*

0NLC 38,1* 38,1* 24,5 34,3* 16,5 25,2* 12,1 20,0* 8,7 14,4* 8,4 12,4*

30,8"LC 38,1* 38,1* 27,0 34,3* 18,1 25,2* 13,2 20,0* 9,5 14,4* 9,2 12,4*LC-V 39,1* 39,1* 33,9 34,4* 22,5 25,2* 16,3 20,0* 12,0 14,2* 11,7 12,5*

– 5NLC 44,7 52,7* 23,7 34,9* 16,0 25,7* 11,5 19,4* 9,0 11,3*

29,1"LC 50,9 52,7* 26,2 34,9* 17,5 25,7* 12,6 19,4* 9,8 11,3*LC-V 53,1* 53,1* 33,3 34,9* 21,9 25,7* 15,7 19,2* 11,1* 11,1*

– 10NLC 45,0 49,8* 23,6 33,7* 15,7 24,2* 11,2 13,6* 8,5* 8,5*

26,7"LC 49,8* 49,8* 26,1 33,7* 17,3 24,2* 12,3 13,6* 8,5* 8,5*LC-V 49,4* 49,4* 33,3 33,5* 21,7 23,7* 12,6* 12,6* 8,7* 8,7*

– 15NLC 41,0* 41,0* 24,0 26,0* 12,5* 12,5* 12,2* 12,2*

20,1"LC 41,0* 41,0* 26,0* 26,0* 12,5* 12,5* 12,2* 12,2*LC-V 39,8* 39,8* 24,5* 24,5* 12,9* 12,9*

– 20NLCLCLC-V

Stick 12'10" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLC 9,5* 9,5*

19' 6"LC 9,5* 9,5*LC-V 9,5* 9,5* 9,3* 9,3*

30NLC 15,4* 15,4* 9,4* 9,4* 8,0* 8,0*

25' 5"LC 15,4* 15,4* 9,4* 9,4* 8,0* 8,0*LC-V 15,5* 15,5* 10,3* 10,3* 7,9* 7,9*

25NLC 16,4* 16,4* 13,9 15,0* 7,3* 7,3*

29' 4"LC 16,4* 16,4* 14,9 15,0* 7,3* 7,3*LC-V 16,5* 16,5* 15,2* 15,2* 7,3* 7,3*

20NLC 17,3* 17,3* 18,3* 18,3* 14,2 17,4* 9,9 12,8* 7,1* 7,1*

32' LC 17,3* 17,3* 18,3* 18,3* 15,2 17,4* 10,7 12,8* 7,1* 7,1*LC-V 17,7* 17,7* 18,5* 18,5* 17,6* 17,6* 13,1 13,1* 7,0* 7,0*

15NLC 42,7* 42,7* 28,5 28,6* 19,1 22,5* 14,0 18,6* 9,9 15,8 7,0* 7,0*

33' 8"LC 42,7* 42,7* 28,6* 28,6* 20,4 22,5* 15,0 18,6* 10,8 15,9 7,0* 7,0*LC-V 43,6* 43,6* 29,3* 29,3* 22,6* 22,6* 17,5 18,7* 13,2 15,9* 7,0* 7,0*

10NLC 44,5* 44,5* 27,4 32,6* 18,6 24,1* 13,7 19,3* 9,8 15,7 7,1* 7,1*

34' 7"LC 44,5* 44,5* 29,3 32,6* 19,9 24,1* 14,8 19,3* 10,6 15,7 7,1* 7,1*LC-V 44,3* 44,3* 32,8* 32,8* 23,1 24,2* 17,2 19,3* 13,0 16,0* 7,1* 7,1*

5NLC 44,3* 44,3* 26,8 33,9* 18,1 24,8* 13,0 19,5* 9,4 15,5 6,9 7,4*

34' 8"LC 44,3* 44,3* 28,7 33,9* 19,6 24,8* 14,1 19,5* 10,3 15,5 7,4* 7,4*LC-V 44,5* 44,5* 33,3 33,8* 22,8 24,9* 17,1 19,5* 12,7 16,0* 7,5* 7,5*

0NLC 41,4* 41,4* 25,2 33,7* 16,9 24,7* 12,3 19,4* 9,0 15,1 7,0 8,0*

34' 2"LC 41,4* 41,4* 27,9 33,7* 18,5 24,7* 13,4 19,4* 9,9 15,1 7,7 8,0*LC-V 41,4* 41,4* 33,2 33,7* 22,8 24,7* 16,6 19,4* 12,3 16,0* 8,1* 8,1*

– 5NLC 44,9 45,9* 23,9 34,1* 16,0 24,9* 11,8 19,7* 8,6 14,7 7,4 8,9*

32'10"LC 45,9* 45,9* 26,5 34,1* 17,6 24,9* 12,9 19,7* 9,5 14,7 8,1 8,9*LC-V 46,5* 46,5* 33,5 34,1* 22,0 24,9* 16,1 19,8* 11,9 14,8* 9,0* 9,0*

– 10NLC 44,4 52,8* 23,3 34,5* 15,6 25,3* 11,3 18,9* 8,4 10,4* 8,2 8,9*

30' 6"LC 50,5 52,8* 25,8 34,5* 17,1 25,3* 12,4 18,9* 9,3 10,4* 8,9* 8,9*LC-V 52,6* 52,6* 32,9 34,5* 21,6 25,3* 15,5 18,7* 9,6* 9,6* 8,7* 8,7*

– 15NLC 44,8 48,4* 23,4 32,4* 15,4 22,6* 11,0 12,3* 8,3* 8,3*

26' 6"LC 48,4* 48,4* 25,9 32,4* 17,0 22,6* 12,1 12,3* 8,3* 8,3*LC-V 47,8* 47,8* 32,0* 32,0* 21,4 21,9* 11,3* 11,3* 8,5* 8,5*

– 20NLC 36,0* 36,0* 20,0* 20,0* 14,6* 14,6*

17' 2"LC 36,0* 36,0* 20,0* 20,0* 14,6* 14,6*LC-V 33,2* 33,2* 18,0* 18,0* 16,5* 16,5*

26 R 936 Litronic

Lift Capacitieswith Mono Boom 19'10" and Counterweight 13,890 lb


Stick 8'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLCLCLC-V

25NLC 16,8* 16,8* 13,1* 13,1*

20' 7"LC 16,8* 16,8* 13,1* 13,1*LC-V 18,4* 18,4* 13,0* 13,0*

20NLC 19,0 19,6* 12,3* 12,3*

24' 4"LC 19,6* 19,6* 12,3* 12,3*LC-V 19,7* 19,7* 12,2* 12,2*

15NLC 39,7* 39,7* 26,4* 26,4* 18,3 21,4* 13,1 19,0* 12,0 12,1*

26' 6"LC 39,7* 39,7* 26,4* 26,4* 19,8 21,4* 14,2 19,0* 12,1* 12,1*LC-V 41,4* 41,4* 26,8* 26,8* 21,6* 21,6* 17,4 19,1* 12,1* 12,1*

10NLC 25,9 32,0* 17,4 23,8* 12,7 19,9* 11,0 12,4*

27' 7"LC 28,4 32,0* 19,0 23,8* 13,8 19,9* 12,0 12,4*LC-V 32,4* 32,4* 23,3 24,0* 17,0 20,0* 12,4* 12,4*

5NLC 24,4 35,6* 16,6 25,8* 12,4 20,3 10,7 13,2*

27'10"LC 26,9 35,6* 18,2 25,8* 13,4 20,4 11,6 13,2*LC-V 33,9 35,7* 22,5 26,0* 16,6 20,8* 13,3* 13,3*

0NLC 23,9 35,9* 16,2 26,6* 12,1 20,1 11,0 14,7*

27' 1"LC 26,4 35,9* 17,7 26,6* 13,2 20,1 11,9 14,7*LC-V 33,3 35,8* 22,0 26,6* 16,3 20,9* 14,8 14,8*

– 5NLC 33,9* 33,9* 23,9 33,7* 16,1 25,6* 12,1 19,5* 12,0 17,4*

25' 4"LC 33,9* 33,9* 26,4 33,7* 17,6 25,6* 13,2 19,5* 13,0 17,4*LC-V 35,6* 35,6* 33,4 33,5* 21,9 25,4* 16,4 19,2* 16,3 17,7*

– 10NLC 37,4* 37,4* 24,3 29,2* 16,3 22,1* 14,3 18,6*

22' 4"LC 37,4* 37,4* 26,8 29,2* 17,8 22,1* 15,6 18,6*LC-V 36,7* 36,7* 28,6* 28,6* 21,6* 21,6* 18,5* 18,5*

– 15NLC 20,0* 20,0* 17,4* 17,4*

16' 8"LC 20,0* 20,0* 17,4* 17,4*LC-V

– 20NLCLCLC-V

Stick 10'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLCLCLC-V

25NLC 10,1* 10,1*

23' LC 10,1* 10,1*LC-V 10,0* 10,0*

20NLC 17,8* 17,8* 13,4 15,4* 9,5* 9,5*

26'5"LC 17,8* 17,8* 14,5 15,4* 9,5* 9,5*LC-V 17,9* 17,9* 16,1* 16,1* 9,5* 9,5*

15NLC 18,5 19,8* 13,2 17,7* 9,4* 9,4*

28'5"LC 19,8* 19,8* 14,3 17,7* 9,4* 9,4*LC-V 24,2* 24,2* 20,0* 20,0* 17,4 17,8* 9,4* 9,4*

10NLC 26,4 29,5* 17,5 22,4* 12,7 18,9* 9,5* 9,5*

29'6"LC 28,9 29,5* 19,1 22,4* 13,8 18,9* 9,5* 9,5*LC-V 30,0* 30,0* 22,6* 22,6* 16,9 19,0* 9,6* 9,6*

5NLC 24,6 34,1* 16,6 24,8* 12,3 20,1* 9,6 10,1*

29'8"LC 27,1 34,1* 18,2 24,8* 13,3 20,1* 10,1* 10,1*LC-V 34,0 34,3* 22,5 25,0* 16,5 20,1* 10,2* 10,2*

0NLC 18,1* 18,1* 23,7 35,7* 16,0 26,1* 11,9 19,9 9,8 11,1*

29' LC 18,1* 18,1* 26,2 35,7* 17,5 26,1* 13,0 19,9 10,7 11,1*LC-V 19,1* 19,1* 33,1 35,7* 21,9 26,2* 16,1 20,7* 11,2* 11,2*

– 5NLC 31,3* 31,3* 23,5 34,6* 15,8 25,9* 11,8 19,7 10,6 12,9*

27'4"LC 31,3* 31,3* 26,0 34,6* 17,3 25,9* 12,9 19,8 11,5 12,9*LC-V 32,5* 32,5* 32,9 34,4* 21,6 25,8* 16,0 20,0* 13,1* 13,1*

– 10NLC 42,3* 42,3* 23,7 31,2* 15,9 23,5* 12,3 16,3*

24'7"LC 42,3* 42,3* 26,2 31,2* 17,4 23,5* 13,4 16,3*LC-V 41,6* 41,6* 30,7* 30,7* 21,8 23,2* 16,7* 16,7*

– 15NLC 31,9* 31,9* 24,2* 24,2* 16,5 16,9* 16,3 16,5*

20'2"LC 31,9* 31,9* 24,2* 24,2* 16,9* 16,9* 16,5* 16,5*LC-V 30,7* 30,7* 23,4* 23,4* 16,3* 16,3*

– 20NLCLCLC-V

Stick 9'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLCLCLC-V

25NLC 18,4* 18,4* 11,5* 11,5*

21'10"LC 18,4* 18,4* 11,5* 11,5*LC-V 18,4* 18,4* 11,4* 11,4*

20NLC 18,7* 18,7* 12,9* 12,9* 10,7* 10,7*

25' 4"LC 18,7* 18,7* 12,9* 12,9* 10,7* 10,7*LC-V 18,8* 18,8* 14,1* 14,1* 10,7* 10,7*

15NLC 25,1* 25,1* 18,4 20,6* 13,2 18,3* 10,6* 10,6*

27' 6"LC 25,1* 25,1* 19,9 20,6* 14,2 18,3* 10,6* 10,6*LC-V 37,4* 37,4* 25,5* 25,5* 20,8* 20,8* 17,4 18,4* 10,6* 10,6*

10NLC 26,1 30,8* 17,5 23,1* 12,7 19,4* 10,5 10,8*

28' 6"LC 28,7 30,8* 19,0 23,1* 13,8 19,4* 10,8* 10,8*LC-V 31,2* 31,2* 23,3 23,4* 17,0 19,5* 10,9* 10,9*

5NLC 24,5 34,9* 16,6 25,4* 12,3 20,3 10,2 11,5*

28' 8"LC 27,0 34,9* 18,2 25,4* 13,4 20,4 11,1 11,5*LC-V 33,9 35,1* 22,5 25,5* 16,5 20,5* 11,6* 11,6*

0NLC 23,8 35,9* 16,1 26,4* 12,0 20,0 10,4 12,7*

28' LC 26,3 35,9* 17,6 26,4* 13,1 20,0 11,3 12,7*LC-V 17,2* 17,2* 33,2 35,8* 21,9 26,4* 16,2 20,9* 12,8* 12,8*

– 5NLC 32,6* 32,6* 23,7 34,3* 15,9 25,8* 12,0 19,9 11,2 14,9*

26' 4"LC 32,6* 32,6* 26,2 34,3* 17,4 25,8* 13,0 19,9* 12,2 14,9*LC-V 34,0* 34,0* 33,2 34,0* 21,8 25,7* 16,2 19,8* 15,1* 15,1*

– 10NLC 40,0* 40,0* 24,0 30,2* 16,1 22,9* 13,2 18,1*

23' 5"LC 40,0* 40,0* 26,5 30,2* 17,6 22,9* 14,4 18,1*LC-V 39,3* 39,3* 29,8* 29,8* 22,0 22,5* 18,1* 18,1*

– 15NLC 22,3* 22,3* 16,5* 16,5*

18'10"LC 22,3* 22,3* 16,5* 16,5*LC-V 21,3* 21,3* 16,2* 16,2*

– 20NLCLCLC-V

Stick 12'10" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLC 8,4* 8,4*

21'8"LC 8,4* 8,4*LC-V 8,2* 8,2*

25NLC 10,9* 10,9* 7,5* 7,5*

26'2"LC 10,9* 10,9* 7,5* 7,5*LC-V 11,5* 11,5* 7,4* 7,4*

20NLC 13,8 15,1* 7,1* 7,1*

29'1"LC 14,9 15,1* 7,1* 7,1*LC-V 15,2* 15,2* 7,1* 7,1*

15NLC 17,6* 17,6* 13,4 16,1* 10,0 10,8* 7,0* 7,0*

31' LC 17,6* 17,6* 14,5 16,1* 10,8* 10,8* 7,0* 7,0*LC-V 17,8* 17,8* 16,2* 16,2* 11,1* 11,1* 7,0* 7,0*

10NLC 40,4* 40,4* 26,1* 26,1* 17,9 20,5* 12,9 17,6* 9,8 14,2* 7,1* 7,1*

32' LC 40,4* 40,4* 26,1* 26,1* 19,5 20,5* 14,0 17,6* 10,6 14,2* 7,1* 7,1*LC-V 41,7* 41,7* 26,6* 26,6* 20,8* 20,8* 17,1 17,7* 13,0 14,5* 7,1* 7,1*

5NLC 19,5* 19,5* 25,3 31,8* 16,9 23,4* 12,4 19,1* 9,5 15,5 7,5* 7,5*

32'1"LC 19,5* 19,5* 27,8 31,8* 18,5 23,4* 13,5 19,1* 10,3 15,6 7,5* 7,5*LC-V 19,1* 19,1* 32,1* 32,1* 22,8 23,6* 16,6 19,2* 12,8 16,4* 7,5* 7,5*

0NLC 21,0* 21,0* 24,0 35,0* 16,1 25,4* 11,9 19,9 9,3 15,3 8,2* 8,2*

31'6"LC 21,0* 21,0* 26,5 35,0* 17,7 25,4* 13,0 20,0 10,1 15,3 8,2* 8,2*LC-V 21,5* 21,5* 33,4 35,1* 22,0 25,5* 16,1 20,3* 12,5 15,8* 8,2* 8,2*

– 5NLC 28,8* 28,8* 23,4 35,4* 15,7 26,0* 11,7 19,6 9,2 9,3*

30' LC 28,8* 28,8* 25,9 35,4* 17,2 26,0* 12,7 19,7 9,3* 9,3*LC-V 29,6* 29,6* 32,8 35,3* 21,5 26,0* 15,9 20,4* 9,4* 9,4*

– 10NLC 40,1* 40,1* 23,4 33,3* 15,6 24,9* 11,6 19,1* 10,3 11,2*

27'6"LC 40,1* 40,1* 25,9 33,3* 17,1 24,9* 12,7 19,1* 11,2* 11,2*LC-V 41,2* 41,2* 32,9 33,0* 21,5 24,7* 15,9 18,9* 11,5* 11,5*

– 15NLC 39,3* 39,3* 23,8 28,4* 15,9 21,1* 12,8 15,4*

23'8"LC 39,3* 39,3* 26,3 28,4* 17,4 21,1* 14,0 15,4*LC-V 38,4* 38,4* 27,8* 27,8* 20,6* 20,6* 16,0* 16,0*

– 20NLCLCLC-V

R 936 Litronic 27

Lift Capacitieswith Straight Mono Boom 21'4" and Counterweight 13,890 lb


Stick 8'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLC 15,5* 15,5*

17' 7"LC 15,5* 15,5*LC-V 15,2* 15,2*

25NLC 19,0 20,8* 13,2* 13,2*

22'11"LC 20,6 20,8* 13,2* 13,2*LC-V 20,7* 20,7* 13,1* 13,1*

20NLC 25,6* 25,6* 18,6 21,4* 13,2 19,1* 12,1 12,3*

26' 4"LC 25,6* 25,6* 20,2 21,4* 14,3 19,1* 12,3* 12,3*LC-V 25,9* 25,9* 21,5* 21,5* 17,4 19,1* 12,3* 12,3*

15NLC 27,0 30,0* 17,8 23,2* 12,9 19,6* 10,6 12,1*

28' 4"LC 29,6 30,0* 19,4 23,2* 14,0 19,6* 11,5 12,1*LC-V 30,4* 30,4* 23,3* 23,3* 17,1 19,7* 12,1* 12,1*

10NLC 24,8 34,6* 16,9 25,2* 12,5 20,4* 9,9 12,2*

29' 5"LC 27,3 34,6* 18,4 25,2* 13,5 20,4* 10,7 12,2*LC-V 34,2 34,8* 22,7 25,3* 16,7 20,4* 12,3* 12,3*

5NLC 23,6 24,8* 16,2 26,3* 12,1 20,0 9,7 12,8*

29' 7"LC 24,8* 24,8* 17,7 26,3* 13,1 20,1 10,5 12,8*LC-V 24,9* 24,9* 22,0 26,3* 16,3 20,8* 12,9* 12,9*

0NLC 23,4 33,2* 15,8 25,9* 11,8 19,7 9,9 13,9*

28'11"LC 25,8 33,2* 17,3 25,9* 12,9 19,8 10,8 13,9*LC-V 32,8 33,4* 21,6 25,8* 16,0 20,3* 13,4 14,0*

– 5NLC 22,2* 22,2* 23,5 29,9* 15,7 23,9* 11,8 18,5* 10,7 15,8*

27' 2"LC 22,2* 22,2* 26,0 29,9* 17,2 23,9* 12,9 18,5* 11,7 15,8*LC-V 24,0* 24,0* 29,5* 29,5* 21,6 23,6* 16,0 18,3* 14,6 15,7*

– 10NLC 23,9 24,3* 16,0 19,6* 12,5 14,0*

24' 6"LC 24,3* 24,3* 17,5 19,6* 13,6 14,0*LC-V 23,7* 23,7* 19,1* 19,1* 13,8* 13,8*

– 15NLCLCLC-V

– 20NLCLCLC-V

Stick 10'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLC 14,6* 14,6* 11,6* 11,6*

20' 7"LC 14,6* 14,6* 11,6* 11,6*LC-V 15,9* 15,9* 11,4* 11,4*

25NLC 19,0* 19,0* 12,2* 12,2* 10,2* 10,2*

25' 4"LC 19,0* 19,0* 12,2* 12,2* 10,2* 10,2*LC-V 19,0* 19,0* 13,5* 13,5* 10,1* 10,1*

20NLC 18,8 19,9* 13,3 17,9* 9,6* 9,6*

28' 5"LC 19,9* 19,9* 14,4 17,9* 9,6* 9,6*LC-V 20,0* 20,0* 17,6 17,9* 9,5* 9,5*

15NLC 27,6 27,6* 18,0 21,8* 12,9 18,6* 9,7 11,6* 9,4* 9,4*

30' 4"LC 27,6* 27,6* 19,6 21,8* 14,0 18,6* 10,5 11,6* 9,4* 9,4*LC-V 28,0* 28,0* 22,0* 22,0* 17,1 18,7* 12,3* 12,3* 9,4* 9,4*

10NLC 25,3 32,6* 17,0 24,0* 12,4 19,6* 9,5 15,5 8,9 9,4*

31' 4"LC 27,8 32,6* 18,5 24,0* 13,5 19,6* 10,3 15,6 9,4* 9,4*LC-V 32,9* 32,9* 22,8 24,2* 16,6 19,7* 12,8 16,8* 9,5* 9,5*

5NLC 23,7 35,3* 16,1 25,7* 11,9 19,9 9,3 15,3 8,7 9,8*

31' 6"LC 26,2 35,3* 17,6 25,7* 13,0 20,0 10,1 15,3 9,5 9,8*LC-V 33,0 35,3* 21,9 25,7* 16,1 20,4* 12,6 16,9* 9,9* 9,9*

0NLC 23,1 34,7* 15,6 25,9* 11,6 19,5 9,2 15,2 8,9 10,6*

30'10"LC 25,5 34,7* 17,1 25,9* 12,7 19,6 10,0 15,2 9,7 10,6*LC-V 32,4 34,5* 21,4 25,9* 15,8 20,4* 12,4 16,2* 10,7* 10,7*

– 5NLC 22,3* 22,3* 23,0 31,8* 15,4 24,6* 11,5 19,2* 9,5 11,9*

29' 4"LC 22,3* 22,3* 25,5 31,8* 16,9 24,6* 12,6 19,2* 10,3 11,9*LC-V 23,4* 23,4* 31,5* 31,5* 21,2 24,4* 15,7 19,1* 12,0* 12,0*

– 10NLC 32,4* 32,4* 23,3 27,0* 15,5 21,3* 11,7 16,0* 10,8 13,6*

26' 8"LC 32,4* 32,4* 25,8 27,0* 17,0 21,3* 12,7 16,0* 11,8 13,6*LC-V 31,7* 31,7* 26,5* 26,5* 20,9* 20,9* 15,6* 15,6* 13,4* 13,4*

– 15NLC 19,3* 19,3* 14,9* 14,9* 11,9* 11,9*

22' 4"LC 19,3* 19,3* 14,9* 14,9* 11,9* 11,9*LC-V 18,5* 18,5* 14,1* 14,1* 12,6* 12,6*

– 20NLCLCLC-V

Stick 9'2" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLCLCLC-V

30NLC 13,3* 13,3*

19' 2"LC 13,3* 13,3*LC-V 13,1* 13,1*

25NLC 19,1 19,9* 11,6* 11,6*

24' 1"LC 19,9* 19,9* 11,6* 11,6*LC-V 19,9* 19,9* 11,5* 11,5*

20NLC 18,7 20,7* 13,2 18,5* 10,8* 10,8*

27' 4"LC 20,3 20,7* 14,3 18,5* 10,8* 10,8*LC-V 24,8* 24,8* 20,8* 20,8* 17,5 18,5* 10,8* 10,8*

15NLC 27,3 28,8* 17,9 22,5* 12,9 19,1* 10,1 10,6*

29' 4"LC 28,8* 28,8* 19,5 22,5* 14,0 19,1* 10,6* 10,6*LC-V 29,3* 29,3* 22,7* 22,7* 17,1 19,2* 10,6* 10,6*

10NLC 25,0 33,6* 16,9 24,6* 12,4 20,0* 9,6 14,0* 9,4 10,7*

30' 4"LC 27,6 33,6* 18,5 24,6* 13,5 20,0* 10,4 14,0* 10,2 10,7*LC-V 33,9* 33,9* 22,8 24,8* 16,6 20,1* 12,8 14,4* 10,7* 10,7*

5NLC 23,6 31,3* 16,1 26,0* 12,0 20,0 9,4 15,4 9,2 11,2*

30' 6"LC 26,1 31,3* 17,6 26,0* 13,1 20,0 10,2 15,4 10,0 11,2*LC-V 31,0* 31,0* 22,0 26,1* 16,2 20,7* 12,7 16,3* 11,2* 11,2*

0NLC 23,2 34,3* 15,7 26,0* 11,7 19,6 9,4 12,1*

29'10"LC 25,7 34,3* 17,2 26,0* 12,8 19,7 10,2 12,1*LC-V 32,6 34,1* 21,5 25,9* 15,9 20,4* 12,2* 12,2*

– 5NLC 22,5* 22,5* 23,3 31,0* 15,6 24,3* 11,7 19,0* 10,1 13,6*

28' 4"LC 22,5* 22,5* 25,7 31,0* 17,1 24,3* 12,7 19,0* 11,0 13,6*LC-V 23,9* 23,9* 30,6* 30,6* 21,4 24,0* 15,9 18,7* 13,8 13,8*

– 10NLC 29,4* 29,4* 23,6 25,7* 15,8 20,5* 11,9 14,9* 11,6 13,8*

25' 7"LC 29,4* 29,4* 25,7* 25,7* 17,3 20,5* 13,0 14,9* 12,7 13,8*LC-V 25,2* 25,2* 20,1* 20,1* 14,3* 14,3* 13,7* 13,7*

– 15NLCLCLC-V

– 20NLCLCLC-V

Stick 12'10" ft

Under- carriage

10 ft 15 ft 20 ft 25 ft 30 ft

ft in

35NLC 10,3* 10,3*

18' LC 10,3* 10,3*LC-V 10,0* 10,0*

30NLC 8,4* 8,4*

24' 4"LC 8,4* 8,4*LC-V 8,3* 8,3*

25NLC 13,7 14,6* 7,5* 7,5*

28' 5"LC 14,6* 14,6* 7,5* 7,5*LC-V 14,8* 14,8* 7,5* 7,5*

20NLC 17,4* 17,4* 13,6 16,4* 10,0 11,4* 7,1* 7,1*

31' 2"LC 17,4* 17,4* 14,7 16,4* 10,8 11,4* 7,1* 7,1*LC-V 17,5* 17,5* 16,5* 16,5* 11,8* 11,8* 7,1* 7,1*

15NLC 22,9* 22,9* 18,5 20,0* 13,1 17,4* 9,8 15,3* 7,0* 7,0*

32'11"LC 22,9* 22,9* 20,0* 20,0* 14,2 17,4* 10,7 15,3* 7,0* 7,0*LC-V 24,3* 24,3* 20,2* 20,2* 17,4 17,5* 13,1 15,6* 7,0* 7,0*

10NLC 26,3 29,9* 17,4 22,6* 12,6 18,6* 9,6 15,6 7,1* 7,1*

33'10"LC 28,9 29,9* 18,9 22,6* 13,7 18,6* 10,4 15,7 7,1* 7,1*LC-V 30,3* 30,3* 22,8* 22,8* 16,8 18,7* 12,9 16,2* 7,1* 7,1*

5NLC 24,3 34,0* 16,4 24,7* 12,0 19,8* 9,3 15,3 7,3* 7,3*

34' LC 26,8 34,0* 17,9 24,7* 13,1 19,8* 10,1 15,4 7,3* 7,3*LC-V 33,7 34,2* 22,2 24,9* 16,2 19,8* 12,6 16,6* 7,4* 7,4*

0NLC 13,0* 13,0* 23,2 35,2* 15,7 25,8* 11,6 19,6 9,0 15,0 7,8* 7,8*

33' 5"LC 13,0* 13,0* 25,7 35,2* 17,2 25,8* 12,7 19,6 9,9 15,1 7,8* 7,8*LC-V 13,6* 13,6* 32,6 35,2* 21,5 25,8* 15,8 20,3* 12,3 16,6* 7,9* 7,9*

– 5NLC 21,2* 21,2* 22,8 33,7* 15,3 25,3* 11,4 19,3 8,9 14,9 8,3 8,7*

32' LC 21,2* 21,2* 25,3 33,7* 16,8 25,3* 12,4 19,3 9,8 15,0 8,7* 8,7*LC-V 22,0* 22,0* 32,2 33,5* 21,1 25,2* 15,6 19,8* 12,2 15,5* 8,7* 8,7*

– 10NLC 31,7* 31,7* 22,9 30,1* 15,3 23,1* 11,4 17,9* 9,2 10,1*

29' 8"LC 31,7* 31,7* 25,4 30,1* 16,8 23,1* 12,4 17,9* 10,1 10,1*LC-V 32,7* 32,7* 29,7* 29,7* 21,1 22,8* 15,6 17,7* 10,2* 10,2*

– 15NLC 30,3* 30,3* 23,4 24,0* 15,6 18,6* 11,7 13,2* 11,1 11,4*

26' 2"LC 30,3* 30,3* 24,0* 24,0* 17,1 18,6* 12,8 13,2* 11,4* 11,4*LC-V 29,3* 29,3* 23,3* 23,3* 18,1* 18,1* 12,6* 12,6* 11,2* 11,2*

– 20NLCLCLC-V

28 R 936 Litronic

Available HD Buckets


Cutt

ing

wid

th

Capa

city

IS

O 74

51

Wei

ght2

)

Wei

ght3

)

NLC-Undercarriage


LC-Undercarriage


LC-V-Undercarriage



HD1)

Mono boom 19'10"41" 1.31 2,425 2,470 v v v v v v v v v v v v v v v v v v v v v v v v


55" 1.90 2,955 3,000 v v v y v v v v v v v y v v v v v v v y v v v v

61" 2.09 3,155 3,200 v v y y v v y y v v v v v v v y v v v v v v v y

65" 2.29 3,395 3,440 v y v V y v v V v v y y v v y V v v v y v v v V

61" 2.42 3,330 3,350 y y v V y v y V v v y V v y v V v v v V v v v V

65" 2.62 3,570 3,615 v y y V v y V – y y v V y v y – v v v V v v v –69" 2.81 3,970 – y V V – – – – – v v y – – – – – v v y – – – – –

Straight mono boom 21'4"41" 1.31 2,425 2,470 v v v v v v v v v v v v v v v v v v v v v v v v

49" 1.63 2,755 2,800 v v v y v v v v v v v v v v v y v v v v v v v v

55" 1.90 2,955 3,000 v v y y v y v V v v v v v v y y v v v y v v v v

61" 2.09 3,155 3,200 y y v V y v y V v v y y v y v V v v v v v v v y

65" 2.29 3,395 3,440 v y V V y V V – y y v V y v y V v v v V v v v V

61" 2.42 3,330 3,350 v y V – y V V – y v y V v y y V v v v V v v v V

65" 2.62 3,570 3,615 y V V – V V – – v y V V y V V – v v v V v v y –69" 2.81 3,970 – V V – – – – – – y V V – – – – – v y y – – – – –

Two-piece boom 13'9"41" 1.31 2,425 2,470 v v v v v v v v v v v v v v v v v v v v v v v v

49" 1.63 2,755 2,800 v v v y v v v v v v v v v v v y v v v v v v v v

55" 1.90 2,955 3,000 v v y y v y v V v v v v v v y y v v v y v v v v

61" 2.09 3,155 3,200 y v y V v y y V v v y y v y v V v v v v v v v y

65" 2.29 3,395 3,440 v y V V y V V – y v v V y v y V v v v y v v v V

61" 2.42 3,330 3,350 y y V – y V V – y v y V v y V V v v v V v v v V

65" 2.62 3,570 3,615 V V V – V V – – v y V V y V V – v v y V v v y –69" 2.81 3,970 – V V – – – – – – V V V – – – – – v y v – – – – –

* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm1) HD bucket with teeth Z 502) Bucket for direct fitting3) Bucket for fitting to quick coupler (SW66, 772 lb)Other backhoes available on request


R 936 Litronic 29

Available Tools

R0338

R0337

R0339

Rigid Ditch Cleaning BucketGRL 100, for mounting to quick coupler SW66Cutting width in 79" 94" 94"Capacity yd3 0.92 1.11 1.63Weight lb 1,215 1,410 1,520

Ditch Cleaning BucketGRL 100, 2 x 50° tiltable, for mounting to quick coupler SW66Cutting width in 79" 79" 87"* 94"* 94"*Capacity yd3 0.92 1.90 2.16 1.11 1.90Weight lb 3,086 3,527 3,660 3,265 3,550

Tilt BucketSL 100, 2 x 50° tiltable, for mounting to quick coupler SW66Cutting width in 63" 63" 71" 71"*Capacity yd3 1.50 1.90 2.09 2.09Weight lb 3,350 3,350 3,570 –Weight in HD-version lb – – – 3,860

Sorting Grab ribbed perforated Gravel tongs

SG 40, for mounting to quick coupler SW66Cutting width in 43"* 43"* 47"*Capacity yd3 1.44 1.70 1.70Weight lb 5,115 4,915 5,205

R0336

* also available for SW48

30 R 936 Litronic

Standard Equipment

Non-exhaustive list, please contact us for further information.

* optionally extendable after one year

UndercarriageLashing eyeletsSprocket with dirt ejectorTrack guide (one piece per track frame)Track rollers, lifetime-lubricatedTracks, sealed and greased

Operator’s Cab7" color multifunction display with touchscreenAir conditioning, automaticCigarette lighter and ashtrayCoat hookCup holderFuel consumption indicator on touchscreenHeadlights (two pieces, Halogen)Hydraulic suspensionInterior lightLiDAT Plus (Liebherr data transfer system) *Mechanical hour meters, readable from outside the cabOil level monitoring on touchscreenOperator seat “Comfort” with horizontal and vertical dampingPreparation for radio installationRain hood over front window openingRearview mirrorsRear view monitoring cameraRear window emergency exitRetractable seat belt 6'7"Roll-down sun blindRoof window, right window and windshield with safety glassROPS safety cab structure (ISO 12117-2)Rubber floor matSliding windows in cab doorStorage binStorage spaceTinted windowsUrea tank level monitoring on touchscreenWindscreen, totally or partially retractableWiper/washer

AttachmentBoom oil-recirculationHeadlight on boom (right, Halogen)Liebherr central lubrication system, fully-automatic (except connecting link for bucket kinematics)Load valve for stick cylinder (on distributor)Safety check valves on hoist cylindersStick oil-recirculation

UppercarriageEngine hood with gas spring openingHandrailsManual main switchNon slip surfacesRight-hand rearview mirrorSound insulationStorage box, lockableSwing brake lock, maintenance-freeSwing drive oil tankTool set 29 pieces

Hydraulic SystemFilter with integrated fine filter areaLiebherr hydraulic oilPositive Control systemPressure storage for controlled lowering of equipment with engine turned offPressure test ports for hydraulicSeparate swing circuitShut-off valve between hydraulic tank and pumpsWork mode selector

EngineCommon-Rail injection systemConform with stage IV / Tier 4f emission standardEngine idling, automatic, sensor-controlledFixed geometry turbo chargerFuel filter and water separatorIntercoolerLiebherr SCR technologyStepless adjustable engine speed

R 936 Litronic 31

Options

Non-exhaustive list, please contact us for further information.

Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty.

UndercarriageChain kit, reinforced (D7G)Cover and base protection platesSpecial paintingSteps, wide versionStorage boxTrack guides (three pieces per track frame)Track pads, angled or chamfered

Operator’s CabFalling objects protection structure (FOPS)Fire extinguisherFirst-aid kitFollow me home headlightsFootrestFront guard protection structure (FGPS)Front headlights (two pieces, LED)Handrest for joysticksImpact-resistant front window (one piece, non removable)Impact-resistant roof windowIntegral protection guardLiebherr proportional control (mini-joysticks 2 axis)Lower part windshield wiperOperator seat “Comfort” with four-point harnessOperator seat “Premium” with integrated ventilationRadio “Comfort”Roof window wiperSpecial paintingSun visorSunshield on cab roofSwitchable high-pressure controlTravel alarm

AttachmentAdditional headlight on boom (left, Halogen or LED)Automatic lubrication system for connecting linkBottom protection for stickEyelet on stickFilter for hydraulic hammer return flowHeadlight on boom (right, LED)Headlights protectionHigh pressure circuitHoist cylinder stroke limitation, adjustableHoist cylinders float positionHydraulic circuit for grappleHydraulic or mechanical quick couplerLiebherr bucket rangeLiebherr tooth systemLIKUFIX (quick-coupling system for hydraulic tools)Lubricant hoses protection on stickMiddle pressure circuitOverload warning devicePiston rod protection for adjustable cylinderPiston rod protection for bucket cylinderPiston rod protection for stick cylinderPreparation for automatic pedestrian detection systemPreparation for machine guidance systemPreparation for weighing systemProtection for quick change-couplings, sideways on stickSafety check valves for stick cylinderSpecial paintingStick cylinder stroke limitation, adjustableTool Control, 10 tool adjustments selectable via displayTool Management, automatic tool recognition (in combination with LIKUFIX)

UppercarriageAdditional headlights on uppercarriage (Halogen or LED) with protectionAdditional right-hand rearview mirrorBottom and lateral protection for uppercarriageCamera for side area monitoringDiesel refuelling pump (electric)Electric socket for external start-up aid (24 V)Electric socket for urea filling station (24 V)Fan drive, reversibleFine filter protection grid for radiatorFuel anti-theft deviceFuel tank cap lockable with padlockHeavy counterweightSkyView 360° cameraSpecial paintingStorage box with extended tool set 40 pieces (incl. toolbox)Walkway, foldableWiggins quick-coupling for fuel

Hydraulic SystemHydraulic bypass fine filterLiebherr hydraulic oil, adapted for extreme climate conditionsLiebherr hydraulic oil, biodegradable

EngineAir pre-filter with dust trapAutomatic engine shut-down on idle (adjustable)Engine compartment lightingEngine shut-down self-timerLiebherr particle filterWiggins quick coupling for engine oil

Operator’s CabAdditional front and/or rear cab headlights (Halogen or LED)Adjustable intensity headlights (LED)Amber beaconAuxiliary heater (programmable)Electric cool box (12 V)Electronic immobilizerEmergency stop button in cab

Wide Product RangeThe Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr’s high-value pro ducts and services enjoy a high reputation in many other fields. The wide range includes domestic appliances, aerospace and trans-portation systems, machine tools and maritime cranes.

Exceptional Customer BenefitEvery product line provides a complete range of models in many different versions. With both their technical excellence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical application.

State-of-the-art TechnologyTo provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured in-house, for instance the entire drive and control technology for construction equipment and mining trucks.

Worldwide and IndependentHans Liebherr founded the Liebherr family company in 1949. Since that time, the enterprise has steadily grown to a group of more than 130 companies with over 41,000 employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the company.

www.liebherr.us

The Liebherr Group of Companies

Liebherr Construction Equipment Co. 4100 Chestnut Avenue, Newport News, VA 23607, USA S +1 (757) 245 5251, Fax +1 (757) 928 8701 www.liebherr.us, E-Mail: [email protected] www.facebook.com/LiebherrConstruction

RG

-BK

LF

R/S

P 1

1833

097-

web

-10.

15_e

nUS

A

ll ill

ustr

atio

ns a

nd d

ata

may

diff

er fr

om s

tand

ard

equi

pmen

t. S

ubje

ct to

cha

nge

with

out n

otic

e. A

ll in

dica

ted

load

s ar

e ba

sed

in a

ccor

danc

e w

ith IS

O 9

248.

Documents

Crawler excavator R 936 - Power Equipment Company · Tier4f emission standards, comprises a diesel exhaust fluid in- ... acoustic power inside the operator’s cab is is ... The engine